* [PATCH v6 00/40] ep93xx device tree conversion
@ 2023-12-12 8:20 Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 01/40] ARM: ep93xx: Add terminator to gpiod_lookup_table Nikita Shubin via B4 Relay
` (41 more replies)
0 siblings, 42 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, Alexander Sverdlin, Russell King,
Lukasz Majewski, Linus Walleij, Bartosz Golaszewski,
Andy Shevchenko, Michael Turquette, Stephen Boyd,
Sebastian Reichel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Nikita Shubin, Vinod Koul, Wim Van Sebroeck,
Guenter Roeck, Thierry Reding, Uwe Kleine-König, Mark Brown,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Damien Le Moal, Sergey Shtylyov, Dmitry Torokhov, Liam Girdwood,
Jaroslav Kysela, Takashi Iwai
Cc: linux-arm-kernel, linux-kernel, linux-gpio, linux-clk, linux-pm,
devicetree, dmaengine, linux-watchdog, linux-pwm, linux-spi,
netdev, linux-mtd, linux-ide, linux-input, linux-sound,
Arnd Bergmann, Bartosz Golaszewski, Krzysztof Kozlowski,
Andrew Lunn, Andy Shevchenko, Andy Shevchenko
No major changes since last version all changes are cometic.
Following patches require attention from Stephen Boyd, as they were converted to aux_dev as suggested:
- ARM: ep93xx: add regmap aux_dev
- clk: ep93xx: add DT support for Cirrus EP93xx
DMA related patches still require Acked or Reviewed tags.
got approval LGTM from Miquel:
- mtd: rawnand: add support for ts72xx
Link: https://lore.kernel.org/lkml/20231004103911.2aa65354@xps-13/
new patches:
ARM: ep93xx: Add terminator to gpiod_lookup_table
- fixed terminator in gpiod_lockup_table
So mostly all patches got approval.
Patches should be now formated with '--histogram'
---
Changes in v6:
- clk: ep93xx: add DT support for Cirrus EP93xx
- s/spin_lock_irqsave()/guard()/
- refactor index check in ep93xx_mux_set_parent_lock() to something more readable
- use in_range in ep93xx_mux_set_parent_lock()/ep93xx_ddiv_set_rate()
- use GENMASK() in ep93xx_ddiv_recalc_rate()
- comment reserved bit in ep93xx_ddiv_set_rate()
- move out from loop ClkDiv value assigment
- some style fixes
Andy, i was i asked to set index of XTALI explicitly, i am not setting ddiv_pdata
there becouse only XTALI is jnown in advance, and i think setting them in one place is more convenient.
- pinctrl: add a Cirrus ep93xx SoC pin controller
- drop OF from Kconfig
- droped linux/of.h include
- add space to */ where it is applicable
- add coma in multiline assigment
- "return NULL" as default case in ep93xx_get_group_name()
- fixed casting id->driver_data
- use device_set_of_node_from_dev()
- use dev_err_probe()
- power: reset: Add a driver for the ep93xx reset
- drop linux/of.h include
- soc: Add SoC driver for Cirrus ep93xx
- s/GPL-2.0/GPL-2.0-only/
- drop linux/kernel.h include
- + blank line before linux/soc/cirrus/ep93xx.h
- + blank line after ep93xx_get_soc_rev()
- + coma for pinctrl_names
- valid casting to int for of_device_get_match_data() return value
- mtd: rawnand: add support for ts72xx
- return as part of switch case
- s/iowrite8/iowrite8_rep/
- net: cirrus: add DT support for Cirrus EP93xx
- fix header sorting
- dma: cirrus: Convert to DT for Cirrus EP93xx
- use devm_clk_get
- use is_slave_direction
Changes in v5:
- gpio: ep93xx: split device in multiple
- ordered headers
- use irqd_to_hwirq()
- s/platform_get_irq()/platform_get_irq_optional()/
- [PATCH v4 02/42] ARM: ep93xx: add swlocked prototypes
- replaced with ARM: ep93xx: add regmap aux_dev
- [PATCH v4 03/42] dt-bindings: clock: Add Cirrus EP93xx
- fixed identation
- removed EP93XX_CLK_END
- and dropped it
- clock bindings moved to syscon with renaming to cirrus,ep9301-syscon.h
- clk: ep93xx: add DT support for Cirrus EP93xx
- convert to auxiliary and use parent device tree node
- moved all clocks except XTALI here
- used devm version everywhere and *_parent_hw() instead of passing name where it's possible
- unfortunately devm_clk_hw_register_fixed_rate doesn't have a parent index version
- [PATCH v4 05/42] dt-bindings: pinctrl: Add Cirrus EP93xx
- "unevaluatedProperties: false" for pins
- returned "additionalProperties: false" where it was
- and dropped it
- pinctrl: add a Cirrus ep93xx SoC pin controller
- sorted includes
- convert to auxiliary and use parent device tree node
- power: reset: Add a driver for the ep93xx reset
- convert to auxiliary device
- dt-bindings: soc: Add Cirrus EP93xx
- dropped all ref to reboot, clk, pinctrl subnodes
- added pins, as it's now used for pinctrl
- added #clock-cells, as it's now used for clk
- dt-bindings: pwm: Add Cirrus EP93xx
- $ref to pwm.yaml
- fixed 'pwm-cells'
- s/additionalProperties/unevaluatedProperties/
- soc: Add SoC driver for Cirrus ep93xx
- removed clocks, they are moved to clk auxiliary driver, as we dropped the clk dt node
- removed all swlocked exported functions
- dropped static spinlock
- added instantiating auxiliary reboot, clk, pinctrl
- dt-bindings: spi: Add Cirrus EP93xx
- Document DMA support
- spi: ep93xx: add DT support for Cirrus EP93xx
- dropped CONFIG_OF and SPI/DMA platform data entirely
- s/master/host/
- reworked DMA setup so we can use probe defer
- dt-bindings: dma: Add Cirrus EP93xx
- dropped bindings header (moved ports description to YAML)
- changed '#dma-cells' to 2, we use port, direction in cells so we can drop platform code completely
- dma: cirrus: add DT support for Cirrus EP93xx
- dropped platform probing completely
- dropped struct ep93xx_dma_data replaced with internal struct ep93xx_dma_chan_cfg with port/direction
- added xlate functions for m2m/m2p
- we require filters to set dma_cfg before hw_setup
- dt-bindings: ata: Add Cirrus EP93xx
- Document DMA support
- ata: pata_ep93xx: add device tree support
- drop DMA platform header with data
- use DMA OF so we can defer probing until DMA is up
- ARM: dts: add Cirrus EP93XX SoC .dtsi
- ARM: dts: ep93xx: add ts7250 board
- ARM: dts: ep93xx: Add EDB9302 DT
- replaced "eclk: clock-controller" to syscon reference
- replaced "pinctrl: pinctrl" to syscon reference
- gpios are now "enabled" by default
- reworked i2s node
- change all dma nodes and refs
- new additions to I2S
- Document DMA
- Document Audio Port usage
- drop legacy DMA support
- Link to v4: https://lore.kernel.org/r/20230915-ep93xx-v4-0-a1d779dcec10@maquefel.me
Changes in v4:
- gpio: ep93xx: split device in multiple
- s/generic_handle_irq/generic_handle_domain_irq/
- s/int offset/irq_hw_number_t offset/ though now it looks a bit odd to me
- drop i = 0
- drop 'error'
- use dev_err_probe withour printing devname once again
dt-bindings: clock: Add Cirrus EP93xx
- renamed cirrus,ep93xx-clock.h -> cirrus,ep9301-clk.h
clk: ep93xx: add DT support for Cirrus EP93xx
- drop unused includes
- use .name only for xtali, pll1, pll2 parents
- convert // to /*
- pass clk_parent_data instead of char* clock name
dt-bindings: pinctrl: Add Cirrus EP93xx
- s/additionalProperties/unevaluatedProperties/
dt-bindings: soc: Add Cirrus EP93xx
- move syscon to soc directory
- add vendor prefix
- make reboot same style as pinctrl, clk
- use absolute path for ref
- expand example
soc: Add SoC driver for Cirrus ep93xx
- s/0xf0000000/GENMASK(31, 28)/
- s/ret/ep93xx_chip_revision(map)/
- drop symbol exports
- convert to platform driver
dt-bindings: rtc: Add Cirrus EP93xx
- allOf: with $ref to rtc.yaml
- s/additionalProperties/unevaluatedProperties/
dt-bindings: watchdog: Add Cirrus EP93x
- drop description
- reword
power: reset: Add a driver for the ep93xx reset
- lets use 'GPL-2.0+' instead of '(GPL-2.0)'
- s/of_device/of/
- drop mdelay with warning
- return 0 at the end
net: cirrus: add DT support for Cirrus EP93xx
- fix leaking np
mtd: nand: add support for ts72xx
- +bits.h
- drop comment
- ok to fwnode_get_next_child_node
- use goto to put handle and nand and report error
ARM: dts: add Cirrus EP93XX SoC .dtsi
- add simple-bus for ebi, as we don't require to setup anything
- add arm,pl011 compatible to uart nodes
- drop i2c-gpio, as it's isn't used anywhere
ARM: dts: ep93xx: add ts7250 board
- generic node name for temperature-sensor
- drop i2c
- move nand, rtc, watchdog to ebi node
- Link to v3: https://lore.kernel.org/r/20230605-ep93xx-v3-0-3d63a5f1103e@maquefel.me
---
Alexander Sverdlin (3):
ASoC: ep93xx: Drop legacy DMA support
ARM: dts: ep93xx: Add EDB9302 DT
ASoC: cirrus: edb93xx: Delete driver
Nikita Shubin (37):
ARM: ep93xx: Add terminator to gpiod_lookup_table
gpio: ep93xx: split device in multiple
ARM: ep93xx: add regmap aux_dev
clk: ep93xx: add DT support for Cirrus EP93xx
pinctrl: add a Cirrus ep93xx SoC pin controller
power: reset: Add a driver for the ep93xx reset
dt-bindings: soc: Add Cirrus EP93xx
soc: Add SoC driver for Cirrus ep93xx
dt-bindings: dma: Add Cirrus EP93xx
dma: cirrus: Convert to DT for Cirrus EP93xx
dt-bindings: watchdog: Add Cirrus EP93x
watchdog: ep93xx: add DT support for Cirrus EP93xx
dt-bindings: pwm: Add Cirrus EP93xx
pwm: ep93xx: add DT support for Cirrus EP93xx
dt-bindings: spi: Add Cirrus EP93xx
spi: ep93xx: add DT support for Cirrus EP93xx
dt-bindings: net: Add Cirrus EP93xx
net: cirrus: add DT support for Cirrus EP93xx
dt-bindings: mtd: Add ts7200 nand-controller
mtd: rawnand: add support for ts72xx
dt-bindings: ata: Add Cirrus EP93xx
ata: pata_ep93xx: add device tree support
dt-bindings: input: Add Cirrus EP93xx keypad
input: keypad: ep93xx: add DT support for Cirrus EP93xx
dt-bindings: wdt: Add ts72xx
wdt: ts72xx: add DT support for ts72xx
gpio: ep93xx: add DT support for gpio-ep93xx
ASoC: dt-bindings: ep93xx: Document DMA support
ASoC: dt-bindings: ep93xx: Document Audio Port support
ARM: dts: add Cirrus EP93XX SoC .dtsi
ARM: dts: ep93xx: add ts7250 board
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
pwm: ep93xx: drop legacy pinctrl
ata: pata_ep93xx: remove legacy pinctrl use
ARM: ep93xx: delete all boardfiles
ARM: ep93xx: soc: drop defines
dma: cirrus: remove platform code
.../bindings/arm/cirrus/cirrus,ep9301.yaml | 38 +
.../bindings/ata/cirrus,ep9312-pata.yaml | 42 +
.../bindings/dma/cirrus,ep9301-dma-m2m.yaml | 84 ++
.../bindings/dma/cirrus,ep9301-dma-m2p.yaml | 144 ++
.../bindings/input/cirrus,ep9307-keypad.yaml | 87 ++
.../devicetree/bindings/mtd/technologic,nand.yaml | 45 +
.../devicetree/bindings/net/cirrus,ep9301-eth.yaml | 59 +
.../devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml | 53 +
.../bindings/soc/cirrus/cirrus,ep9301-syscon.yaml | 94 ++
.../bindings/sound/cirrus,ep9301-i2s.yaml | 16 +
.../devicetree/bindings/spi/cirrus,ep9301-spi.yaml | 70 +
.../bindings/watchdog/cirrus,ep9301-wdt.yaml | 42 +
.../bindings/watchdog/technologic,ts7200-wdt.yaml | 45 +
arch/arm/Makefile | 1 -
arch/arm/boot/dts/cirrus/Makefile | 4 +
arch/arm/boot/dts/cirrus/ep93xx-bk3.dts | 126 ++
arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts | 182 +++
arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts | 145 ++
arch/arm/boot/dts/cirrus/ep93xx.dtsi | 441 ++++++
arch/arm/mach-ep93xx/Kconfig | 20 +-
arch/arm/mach-ep93xx/Makefile | 11 -
arch/arm/mach-ep93xx/clock.c | 733 ----------
arch/arm/mach-ep93xx/core.c | 1017 --------------
arch/arm/mach-ep93xx/dma.c | 114 --
arch/arm/mach-ep93xx/edb93xx.c | 344 -----
arch/arm/mach-ep93xx/ep93xx-regs.h | 38 -
arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 --
arch/arm/mach-ep93xx/hardware.h | 25 -
arch/arm/mach-ep93xx/irqs.h | 76 --
arch/arm/mach-ep93xx/platform.h | 42 -
arch/arm/mach-ep93xx/soc.h | 212 ---
arch/arm/mach-ep93xx/timer-ep93xx.c | 143 --
arch/arm/mach-ep93xx/ts72xx.c | 422 ------
arch/arm/mach-ep93xx/ts72xx.h | 94 --
arch/arm/mach-ep93xx/vision_ep9307.c | 311 -----
drivers/ata/pata_ep93xx.c | 106 +-
drivers/clk/Kconfig | 8 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-ep93xx.c | 849 ++++++++++++
drivers/dma/ep93xx_dma.c | 286 +++-
drivers/gpio/gpio-ep93xx.c | 345 ++---
drivers/input/keyboard/ep93xx_keypad.c | 74 +-
drivers/mtd/nand/raw/Kconfig | 7 +
drivers/mtd/nand/raw/Makefile | 1 +
drivers/mtd/nand/raw/technologic-nand-controller.c | 220 +++
drivers/net/ethernet/cirrus/ep93xx_eth.c | 63 +-
drivers/pinctrl/Kconfig | 7 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ep93xx.c | 1430 ++++++++++++++++++++
drivers/power/reset/Kconfig | 10 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/ep93xx-restart.c | 80 ++
drivers/pwm/pwm-ep93xx.c | 26 +-
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/cirrus/Kconfig | 13 +
drivers/soc/cirrus/Makefile | 2 +
drivers/soc/cirrus/soc-ep93xx.c | 247 ++++
drivers/spi/spi-ep93xx.c | 68 +-
drivers/watchdog/ep93xx_wdt.c | 8 +
drivers/watchdog/ts72xx_wdt.c | 8 +
include/dt-bindings/clock/cirrus,ep9301-syscon.h | 46 +
include/linux/platform_data/dma-ep93xx.h | 94 --
include/linux/platform_data/eth-ep93xx.h | 10 -
include/linux/platform_data/keypad-ep93xx.h | 32 -
include/linux/platform_data/spi-ep93xx.h | 15 -
include/linux/soc/cirrus/ep93xx.h | 47 +-
sound/soc/cirrus/Kconfig | 9 -
sound/soc/cirrus/Makefile | 4 -
sound/soc/cirrus/edb93xx.c | 117 --
sound/soc/cirrus/ep93xx-i2s.c | 19 -
sound/soc/cirrus/ep93xx-pcm.c | 19 +-
72 files changed, 5192 insertions(+), 4514 deletions(-)
---
base-commit: 26aff849438cebcd05f1a647390c4aa700d5c0f1
change-id: 20230605-ep93xx-01c76317e2d2
Best regards,
--
Nikita Shubin <nikita.shubin@maquefel.me>
^ permalink raw reply [flat|nested] 77+ messages in thread
* [PATCH v6 01/40] ARM: ep93xx: Add terminator to gpiod_lookup_table
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 17:24 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 02/40] gpio: ep93xx: split device in multiple Nikita Shubin via B4 Relay
` (40 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, Alexander Sverdlin, Russell King
Cc: linux-arm-kernel, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/mach-ep93xx/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 71b113976420..8b1ec60a9a46 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -339,6 +339,7 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
GPIO_LOOKUP_IDX("G", 0, NULL, 1,
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ { }
},
};
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 02/40] gpio: ep93xx: split device in multiple
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 01/40] ARM: ep93xx: Add terminator to gpiod_lookup_table Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 03/40] ARM: ep93xx: add regmap aux_dev Nikita Shubin via B4 Relay
` (39 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, Alexander Sverdlin, Russell King,
Lukasz Majewski, Linus Walleij, Bartosz Golaszewski,
Andy Shevchenko
Cc: linux-arm-kernel, linux-kernel, linux-gpio, Arnd Bergmann,
Bartosz Golaszewski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Prepare ep93xx SOC gpio to convert into device tree driver:
- dropped banks and legacy defines
- split AB IRQ and make it shared
We are relying on IRQ number information A, B ports have single shared
IRQ, while F port have dedicated IRQ for each line.
Also we had to split single ep93xx platform_device into multiple, one
for each port, without this we can't do a full working transition from
legacy platform code into device tree capable. All GPIO_LOOKUP were
change to match new chip namings.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/mach-ep93xx/core.c | 121 ++++++++++++--
arch/arm/mach-ep93xx/edb93xx.c | 2 +-
arch/arm/mach-ep93xx/ts72xx.c | 4 +-
arch/arm/mach-ep93xx/vision_ep9307.c | 10 +-
drivers/gpio/gpio-ep93xx.c | 311 +++++++++++++----------------------
5 files changed, 228 insertions(+), 220 deletions(-)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 8b1ec60a9a46..03bce5e9d1f1 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -35,6 +35,7 @@
#include <linux/reboot.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/random.h>
+#include <linux/ioport.h>
#include "hardware.h"
#include <linux/platform_data/video-ep93xx.h>
@@ -139,9 +140,80 @@ EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
/*************************************************************************
* EP93xx GPIO
*************************************************************************/
-static struct resource ep93xx_gpio_resource[] = {
- DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc),
+/* port A */
+static struct resource ep93xx_a_gpio_resources[] = {
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE, 0x04, "data"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x10, 0x04, "dir"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x90, 0x1c, "intr"),
DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
+};
+
+static struct platform_device ep93xx_a_gpio = {
+ .name = "gpio-ep93xx",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ep93xx_a_gpio_resources),
+ .resource = ep93xx_a_gpio_resources,
+};
+
+/* port B */
+static struct resource ep93xx_b_gpio_resources[] = {
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x04, 0x04, "data"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x14, 0x04, "dir"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0xac, 0x1c, "intr"),
+ DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
+};
+
+static struct platform_device ep93xx_b_gpio = {
+ .name = "gpio-ep93xx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ep93xx_b_gpio_resources),
+ .resource = ep93xx_b_gpio_resources,
+};
+
+/* port C */
+static struct resource ep93xx_c_gpio_resources[] = {
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x08, 0x04, "data"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x18, 0x04, "dir"),
+};
+
+static struct platform_device ep93xx_c_gpio = {
+ .name = "gpio-ep93xx",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(ep93xx_c_gpio_resources),
+ .resource = ep93xx_c_gpio_resources,
+};
+
+/* port D */
+static struct resource ep93xx_d_gpio_resources[] = {
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x0c, 0x04, "data"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x1c, 0x04, "dir"),
+};
+
+static struct platform_device ep93xx_d_gpio = {
+ .name = "gpio-ep93xx",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(ep93xx_d_gpio_resources),
+ .resource = ep93xx_d_gpio_resources,
+};
+
+/* port E */
+static struct resource ep93xx_e_gpio_resources[] = {
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x20, 0x04, "data"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x24, 0x04, "dir"),
+};
+
+static struct platform_device ep93xx_e_gpio = {
+ .name = "gpio-ep93xx",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(ep93xx_e_gpio_resources),
+ .resource = ep93xx_e_gpio_resources,
+};
+
+/* port F */
+static struct resource ep93xx_f_gpio_resources[] = {
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x30, 0x04, "data"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x34, 0x04, "dir"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x4c, 0x1c, "intr"),
DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX),
DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX),
DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX),
@@ -152,11 +224,34 @@ static struct resource ep93xx_gpio_resource[] = {
DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX),
};
-static struct platform_device ep93xx_gpio_device = {
- .name = "gpio-ep93xx",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_gpio_resource),
- .resource = ep93xx_gpio_resource,
+static struct platform_device ep93xx_f_gpio = {
+ .name = "gpio-ep93xx",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(ep93xx_f_gpio_resources),
+ .resource = ep93xx_f_gpio_resources,
+};
+
+/* port G */
+static struct resource ep93xx_g_gpio_resources[] = {
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x38, 0x04, "data"),
+ DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x3c, 0x04, "dir"),
+};
+
+static struct platform_device ep93xx_g_gpio = {
+ .name = "gpio-ep93xx",
+ .id = 6,
+ .num_resources = ARRAY_SIZE(ep93xx_g_gpio_resources),
+ .resource = ep93xx_g_gpio_resources,
+};
+
+static struct platform_device *ep93xx_gpio_device[] __initdata = {
+ &ep93xx_a_gpio,
+ &ep93xx_b_gpio,
+ &ep93xx_c_gpio,
+ &ep93xx_d_gpio,
+ &ep93xx_e_gpio,
+ &ep93xx_f_gpio,
+ &ep93xx_g_gpio,
};
/*************************************************************************
@@ -335,9 +430,9 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
.dev_id = "i2c-gpio.0",
.table = {
/* Use local offsets on gpiochip/port "G" */
- GPIO_LOOKUP_IDX("G", 1, NULL, 0,
+ GPIO_LOOKUP_IDX("gpio-ep93xx.6", 1, NULL, 0,
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP_IDX("G", 0, NULL, 1,
+ GPIO_LOOKUP_IDX("gpio-ep93xx.6", 0, NULL, 1,
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
{ }
},
@@ -441,8 +536,8 @@ static struct gpiod_lookup_table ep93xx_leds_gpio_table = {
.dev_id = "leds-gpio",
.table = {
/* Use local offsets on gpiochip/port "E" */
- GPIO_LOOKUP_IDX("E", 0, NULL, 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("E", 1, NULL, 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-ep93xx.4", 0, NULL, 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-ep93xx.4", 1, NULL, 1, GPIO_ACTIVE_HIGH),
{ }
},
};
@@ -975,6 +1070,7 @@ static struct device __init *ep93xx_init_soc(void)
struct device __init *ep93xx_init_devices(void)
{
struct device *parent;
+ unsigned int i;
/* Disallow access to MaverickCrunch initially */
ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
@@ -989,7 +1085,8 @@ struct device __init *ep93xx_init_devices(void)
parent = ep93xx_init_soc();
/* Get the GPIO working early, other devices need it */
- platform_device_register(&ep93xx_gpio_device);
+ for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_device); i++)
+ platform_device_register(ep93xx_gpio_device[i]);
amba_device_register(&uart1_device, &iomem_resource);
amba_device_register(&uart2_device, &iomem_resource);
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 4b90899a66e9..c1e880946f72 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -105,7 +105,7 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = {
.dev_id = "spi0",
.table = {
- GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-ep93xx.0", 6, "cs", GPIO_ACTIVE_LOW),
{ },
},
};
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index d3de7283ecb3..0bbdf587c685 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -268,7 +268,7 @@ static struct spi_board_info bk3_spi_board_info[] __initdata = {
static struct gpiod_lookup_table bk3_spi_cs_gpio_table = {
.dev_id = "spi0",
.table = {
- GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-ep93xx.5", 3, "cs", GPIO_ACTIVE_LOW),
{ },
},
};
@@ -318,7 +318,7 @@ static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = {
.dev_id = "spi0",
.table = {
/* DIO_17 */
- GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-ep93xx.5", 2, "cs", GPIO_ACTIVE_LOW),
{ },
},
};
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 30d9cf3791eb..020223b0be2b 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -206,9 +206,9 @@ static struct gpiod_lookup_table vision_spi_mmc_gpio_table = {
.dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */
.table = {
/* Card detect */
- GPIO_LOOKUP_IDX("B", 7, NULL, 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-ep93xx.1", 7, NULL, 0, GPIO_ACTIVE_LOW),
/* Write protect */
- GPIO_LOOKUP_IDX("F", 0, NULL, 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-ep93xx.5", 0, NULL, 1, GPIO_ACTIVE_HIGH),
{ },
},
};
@@ -244,9 +244,9 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
.dev_id = "spi0",
.table = {
- GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-ep93xx.0", 6, "cs", 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-ep93xx.0", 7, "cs", 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-ep93xx.6", 2, "cs", 2, GPIO_ACTIVE_LOW),
{ },
},
};
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 6cedf46efec6..a55f635585f4 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -18,30 +18,10 @@
#include <linux/gpio/driver.h>
#include <linux/bitops.h>
#include <linux/seq_file.h>
-
-#define EP93XX_GPIO_F_INT_STATUS 0x5c
-#define EP93XX_GPIO_A_INT_STATUS 0xa0
-#define EP93XX_GPIO_B_INT_STATUS 0xbc
-
-/* Maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX 63
-
-/* Number of GPIO chips in EP93XX */
-#define EP93XX_GPIO_CHIP_NUM 8
-
-/* Maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ 23
-
-#define EP93XX_GPIO_A_IRQ_BASE 64
-#define EP93XX_GPIO_B_IRQ_BASE 72
-/*
- * Static mapping of GPIO bank F IRQS:
- * F0..F7 (16..24) to irq 80..87.
- */
-#define EP93XX_GPIO_F_IRQ_BASE 80
+#include <linux/interrupt.h>
struct ep93xx_gpio_irq_chip {
- u8 irq_offset;
+ void __iomem *base;
u8 int_unmasked;
u8 int_enabled;
u8 int_type1;
@@ -50,15 +30,11 @@ struct ep93xx_gpio_irq_chip {
};
struct ep93xx_gpio_chip {
+ void __iomem *base;
struct gpio_chip gc;
struct ep93xx_gpio_irq_chip *eic;
};
-struct ep93xx_gpio {
- void __iomem *base;
- struct ep93xx_gpio_chip gc[EP93XX_GPIO_CHIP_NUM];
-};
-
#define to_ep93xx_gpio_chip(x) container_of(x, struct ep93xx_gpio_chip, gc)
static struct ep93xx_gpio_irq_chip *to_ep93xx_gpio_irq_chip(struct gpio_chip *gc)
@@ -79,25 +55,23 @@ static struct ep93xx_gpio_irq_chip *to_ep93xx_gpio_irq_chip(struct gpio_chip *gc
#define EP93XX_INT_RAW_STATUS_OFFSET 0x14
#define EP93XX_INT_DEBOUNCE_OFFSET 0x18
-static void ep93xx_gpio_update_int_params(struct ep93xx_gpio *epg,
- struct ep93xx_gpio_irq_chip *eic)
+static void ep93xx_gpio_update_int_params(struct ep93xx_gpio_irq_chip *eic)
{
- writeb_relaxed(0, epg->base + eic->irq_offset + EP93XX_INT_EN_OFFSET);
+ writeb_relaxed(0, eic->base + EP93XX_INT_EN_OFFSET);
writeb_relaxed(eic->int_type2,
- epg->base + eic->irq_offset + EP93XX_INT_TYPE2_OFFSET);
+ eic->base + EP93XX_INT_TYPE2_OFFSET);
writeb_relaxed(eic->int_type1,
- epg->base + eic->irq_offset + EP93XX_INT_TYPE1_OFFSET);
+ eic->base + EP93XX_INT_TYPE1_OFFSET);
writeb_relaxed(eic->int_unmasked & eic->int_enabled,
- epg->base + eic->irq_offset + EP93XX_INT_EN_OFFSET);
+ eic->base + EP93XX_INT_EN_OFFSET);
}
static void ep93xx_gpio_int_debounce(struct gpio_chip *gc,
unsigned int offset, bool enable)
{
- struct ep93xx_gpio *epg = gpiochip_get_data(gc);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
int port_mask = BIT(offset);
@@ -106,53 +80,43 @@ static void ep93xx_gpio_int_debounce(struct gpio_chip *gc,
else
eic->int_debounce &= ~port_mask;
- writeb(eic->int_debounce,
- epg->base + eic->irq_offset + EP93XX_INT_DEBOUNCE_OFFSET);
+ writeb(eic->int_debounce, eic->base + EP93XX_INT_DEBOUNCE_OFFSET);
}
-static void ep93xx_gpio_ab_irq_handler(struct irq_desc *desc)
+static u32 ep93xx_gpio_ab_irq_handler(struct gpio_chip *gc)
{
- struct gpio_chip *gc = irq_desc_get_handler_data(desc);
- struct ep93xx_gpio *epg = gpiochip_get_data(gc);
- struct irq_chip *irqchip = irq_desc_get_chip(desc);
+ struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
unsigned long stat;
int offset;
- chained_irq_enter(irqchip, desc);
-
- /*
- * Dispatch the IRQs to the irqdomain of each A and B
- * gpiochip irqdomains depending on what has fired.
- * The tricky part is that the IRQ line is shared
- * between bank A and B and each has their own gpiochip.
- */
- stat = readb(epg->base + EP93XX_GPIO_A_INT_STATUS);
+ stat = readb(eic->base + EP93XX_INT_STATUS_OFFSET);
for_each_set_bit(offset, &stat, 8)
- generic_handle_domain_irq(epg->gc[0].gc.irq.domain,
- offset);
+ generic_handle_domain_irq(gc->irq.domain, offset);
- stat = readb(epg->base + EP93XX_GPIO_B_INT_STATUS);
- for_each_set_bit(offset, &stat, 8)
- generic_handle_domain_irq(epg->gc[1].gc.irq.domain,
- offset);
+ return stat;
+}
- chained_irq_exit(irqchip, desc);
+static irqreturn_t ep93xx_ab_irq_handler(int irq, void *dev_id)
+{
+ return IRQ_RETVAL(ep93xx_gpio_ab_irq_handler(dev_id));
}
static void ep93xx_gpio_f_irq_handler(struct irq_desc *desc)
{
- /*
- * map discontiguous hw irq range to continuous sw irq range:
- *
- * IRQ_EP93XX_GPIO{0..7}MUX -> EP93XX_GPIO_LINE_F{0..7}
- */
struct irq_chip *irqchip = irq_desc_get_chip(desc);
- unsigned int irq = irq_desc_get_irq(desc);
- int port_f_idx = (irq & 7) ^ 4; /* {20..23,48..51} -> {0..7} */
- int gpio_irq = EP93XX_GPIO_F_IRQ_BASE + port_f_idx;
+ struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+ struct gpio_irq_chip *gic = &gc->irq;
+ unsigned int parent = irq_desc_get_irq(desc);
+ unsigned int i;
chained_irq_enter(irqchip, desc);
- generic_handle_irq(gpio_irq);
+ for (i = 0; i < gic->num_parents; i++)
+ if (gic->parents[i] == parent)
+ break;
+
+ if (i < gic->num_parents)
+ generic_handle_domain_irq(gc->irq.domain, i);
+
chained_irq_exit(irqchip, desc);
}
@@ -160,31 +124,29 @@ static void ep93xx_gpio_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
- struct ep93xx_gpio *epg = gpiochip_get_data(gc);
- int port_mask = BIT(d->irq & 7);
+ int port_mask = BIT(irqd_to_hwirq(d));
if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
eic->int_type2 ^= port_mask; /* switch edge direction */
- ep93xx_gpio_update_int_params(epg, eic);
+ ep93xx_gpio_update_int_params(eic);
}
- writeb(port_mask, epg->base + eic->irq_offset + EP93XX_INT_EOI_OFFSET);
+ writeb(port_mask, eic->base + EP93XX_INT_EOI_OFFSET);
}
static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
- struct ep93xx_gpio *epg = gpiochip_get_data(gc);
- int port_mask = BIT(d->irq & 7);
+ int port_mask = BIT(irqd_to_hwirq(d));
if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH)
eic->int_type2 ^= port_mask; /* switch edge direction */
eic->int_unmasked &= ~port_mask;
- ep93xx_gpio_update_int_params(epg, eic);
+ ep93xx_gpio_update_int_params(eic);
- writeb(port_mask, epg->base + eic->irq_offset + EP93XX_INT_EOI_OFFSET);
+ writeb(port_mask, eic->base + EP93XX_INT_EOI_OFFSET);
gpiochip_disable_irq(gc, irqd_to_hwirq(d));
}
@@ -192,10 +154,9 @@ static void ep93xx_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
- struct ep93xx_gpio *epg = gpiochip_get_data(gc);
- eic->int_unmasked &= ~BIT(d->irq & 7);
- ep93xx_gpio_update_int_params(epg, eic);
+ eic->int_unmasked &= ~BIT(irqd_to_hwirq(d));
+ ep93xx_gpio_update_int_params(eic);
gpiochip_disable_irq(gc, irqd_to_hwirq(d));
}
@@ -203,11 +164,10 @@ static void ep93xx_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
- struct ep93xx_gpio *epg = gpiochip_get_data(gc);
gpiochip_enable_irq(gc, irqd_to_hwirq(d));
- eic->int_unmasked |= BIT(d->irq & 7);
- ep93xx_gpio_update_int_params(epg, eic);
+ eic->int_unmasked |= BIT(irqd_to_hwirq(d));
+ ep93xx_gpio_update_int_params(eic);
}
/*
@@ -219,8 +179,7 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
- struct ep93xx_gpio *epg = gpiochip_get_data(gc);
- int offset = d->irq & 7;
+ irq_hw_number_t offset = irqd_to_hwirq(d);
int port_mask = BIT(offset);
irq_flow_handler_t handler;
@@ -264,51 +223,11 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
eic->int_enabled |= port_mask;
- ep93xx_gpio_update_int_params(epg, eic);
+ ep93xx_gpio_update_int_params(eic);
return 0;
}
-/*************************************************************************
- * gpiolib interface for EP93xx on-chip GPIOs
- *************************************************************************/
-struct ep93xx_gpio_bank {
- const char *label;
- int data;
- int dir;
- int irq;
- int base;
- bool has_irq;
- bool has_hierarchical_irq;
- unsigned int irq_base;
-};
-
-#define EP93XX_GPIO_BANK(_label, _data, _dir, _irq, _base, _has_irq, _has_hier, _irq_base) \
- { \
- .label = _label, \
- .data = _data, \
- .dir = _dir, \
- .irq = _irq, \
- .base = _base, \
- .has_irq = _has_irq, \
- .has_hierarchical_irq = _has_hier, \
- .irq_base = _irq_base, \
- }
-
-static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
- /* Bank A has 8 IRQs */
- EP93XX_GPIO_BANK("A", 0x00, 0x10, 0x90, 0, true, false, EP93XX_GPIO_A_IRQ_BASE),
- /* Bank B has 8 IRQs */
- EP93XX_GPIO_BANK("B", 0x04, 0x14, 0xac, 8, true, false, EP93XX_GPIO_B_IRQ_BASE),
- EP93XX_GPIO_BANK("C", 0x08, 0x18, 0x00, 40, false, false, 0),
- EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 0x00, 24, false, false, 0),
- EP93XX_GPIO_BANK("E", 0x20, 0x24, 0x00, 32, false, false, 0),
- /* Bank F has 8 IRQs */
- EP93XX_GPIO_BANK("F", 0x30, 0x34, 0x4c, 16, false, true, EP93XX_GPIO_F_IRQ_BASE),
- EP93XX_GPIO_BANK("G", 0x38, 0x3c, 0x00, 48, false, false, 0),
- EP93XX_GPIO_BANK("H", 0x40, 0x44, 0x00, 56, false, false, 0),
-};
-
static int ep93xx_gpio_set_config(struct gpio_chip *gc, unsigned offset,
unsigned long config)
{
@@ -342,110 +261,102 @@ static const struct irq_chip gpio_eic_irq_chip = {
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
-static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
- struct platform_device *pdev,
- struct ep93xx_gpio *epg,
- struct ep93xx_gpio_bank *bank)
+static int ep93xx_setup_irqs(struct platform_device *pdev,
+ struct ep93xx_gpio_chip *egc)
{
- void __iomem *data = epg->base + bank->data;
- void __iomem *dir = epg->base + bank->dir;
struct gpio_chip *gc = &egc->gc;
struct device *dev = &pdev->dev;
- struct gpio_irq_chip *girq;
- int err;
+ struct gpio_irq_chip *girq = &gc->irq;
+ int ret, irq, i;
+ void __iomem *intr;
- err = bgpio_init(gc, dev, 1, data, NULL, NULL, dir, NULL, 0);
- if (err)
- return err;
+ intr = devm_platform_ioremap_resource_byname(pdev, "intr");
+ if (IS_ERR(intr))
+ return PTR_ERR(intr);
- gc->label = bank->label;
- gc->base = bank->base;
+ gc->set_config = ep93xx_gpio_set_config;
+ egc->eic = devm_kzalloc(dev, sizeof(*egc->eic), GFP_KERNEL);
+ if (!egc->eic)
+ return -ENOMEM;
- girq = &gc->irq;
- if (bank->has_irq || bank->has_hierarchical_irq) {
- gc->set_config = ep93xx_gpio_set_config;
- egc->eic = devm_kcalloc(dev, 1,
- sizeof(*egc->eic),
- GFP_KERNEL);
- if (!egc->eic)
- return -ENOMEM;
- egc->eic->irq_offset = bank->irq;
- gpio_irq_chip_set_chip(girq, &gpio_eic_irq_chip);
- }
+ egc->eic->base = intr;
+ gpio_irq_chip_set_chip(girq, &gpio_eic_irq_chip);
+ girq->num_parents = platform_irq_count(pdev);
+ if (girq->num_parents == 0)
+ return -EINVAL;
- if (bank->has_irq) {
- int ab_parent_irq = platform_get_irq(pdev, 0);
+ girq->parents = devm_kcalloc(dev, girq->num_parents,
+ sizeof(*girq->parents),
+ GFP_KERNEL);
+ if (!girq->parents)
+ return -ENOMEM;
- girq->parent_handler = ep93xx_gpio_ab_irq_handler;
- girq->num_parents = 1;
- girq->parents = devm_kcalloc(dev, girq->num_parents,
- sizeof(*girq->parents),
- GFP_KERNEL);
- if (!girq->parents)
- return -ENOMEM;
- girq->default_type = IRQ_TYPE_NONE;
- girq->handler = handle_level_irq;
- girq->parents[0] = ab_parent_irq;
- girq->first = bank->irq_base;
- }
+ if (girq->num_parents == 1) { /* A/B irqchips */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
- /* Only bank F has especially funky IRQ handling */
- if (bank->has_hierarchical_irq) {
- int gpio_irq;
- int i;
+ ret = devm_request_irq(dev, irq, ep93xx_ab_irq_handler,
+ IRQF_SHARED, gc->label, gc);
+ if (ret)
+ return dev_err_probe(dev, ret, "requesting IRQ: %d\n", irq);
- /*
- * FIXME: convert this to use hierarchical IRQ support!
- * this requires fixing the root irqchip to be hierarchical.
- */
+ girq->parents[0] = irq;
+ } else { /* F irqchip */
girq->parent_handler = ep93xx_gpio_f_irq_handler;
- girq->num_parents = 8;
- girq->parents = devm_kcalloc(dev, girq->num_parents,
- sizeof(*girq->parents),
- GFP_KERNEL);
- if (!girq->parents)
- return -ENOMEM;
- /* Pick resources 1..8 for these IRQs */
+
for (i = 0; i < girq->num_parents; i++) {
- girq->parents[i] = platform_get_irq(pdev, i + 1);
- gpio_irq = bank->irq_base + i;
- irq_set_chip_data(gpio_irq, &epg->gc[5]);
- irq_set_chip_and_handler(gpio_irq,
- girq->chip,
- handle_level_irq);
- irq_clear_status_flags(gpio_irq, IRQ_NOREQUEST);
+ irq = platform_get_irq(pdev, i);
+ if (irq < 0)
+ continue;
+
+ girq->parents[i] = irq;
}
- girq->default_type = IRQ_TYPE_NONE;
- girq->handler = handle_level_irq;
- girq->first = bank->irq_base;
+
+ girq->map = girq->parents;
}
- return devm_gpiochip_add_data(dev, gc, epg);
+ girq->default_type = IRQ_TYPE_NONE;
+ /* TODO: replace with handle_bad_irq() once we are fully hierarchical */
+ girq->handler = handle_simple_irq;
+
+ return 0;
}
static int ep93xx_gpio_probe(struct platform_device *pdev)
{
- struct ep93xx_gpio *epg;
- int i;
+ struct ep93xx_gpio_chip *egc;
+ struct gpio_chip *gc;
+ void __iomem *data;
+ void __iomem *dir;
+ int ret;
- epg = devm_kzalloc(&pdev->dev, sizeof(*epg), GFP_KERNEL);
- if (!epg)
+ egc = devm_kzalloc(&pdev->dev, sizeof(*egc), GFP_KERNEL);
+ if (!egc)
return -ENOMEM;
- epg->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(epg->base))
- return PTR_ERR(epg->base);
+ data = devm_platform_ioremap_resource_byname(pdev, "data");
+ if (IS_ERR(data))
+ return PTR_ERR(data);
- for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
- struct ep93xx_gpio_chip *gc = &epg->gc[i];
- struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i];
+ dir = devm_platform_ioremap_resource_byname(pdev, "dir");
+ if (IS_ERR(dir))
+ return PTR_ERR(dir);
- if (ep93xx_gpio_add_bank(gc, pdev, epg, bank))
- dev_warn(&pdev->dev, "Unable to add gpio bank %s\n",
- bank->label);
+ gc = &egc->gc;
+ ret = bgpio_init(gc, &pdev->dev, 1, data, NULL, NULL, dir, NULL, 0);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "unable to init generic GPIO\n");
+
+ gc->label = dev_name(&pdev->dev);
+ if (platform_irq_count(pdev) > 0) {
+ dev_dbg(&pdev->dev, "setting up irqs for %s\n", dev_name(&pdev->dev));
+ ret = ep93xx_setup_irqs(pdev, egc);
+ if (ret)
+ dev_err_probe(&pdev->dev, ret, "setup irqs failed");
}
- return 0;
+ return devm_gpiochip_add_data(&pdev->dev, gc, egc);
}
static struct platform_driver ep93xx_gpio_driver = {
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 03/40] ARM: ep93xx: add regmap aux_dev
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 01/40] ARM: ep93xx: Add terminator to gpiod_lookup_table Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 02/40] gpio: ep93xx: split device in multiple Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 17:28 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 04/40] clk: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
` (38 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Nikita Shubin, Linus Walleij, Dmitry Torokhov, Damien Le Moal,
Andy Shevchenko
Cc: Uwe Kleine-König, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
The following driver's should be instantiated by ep93xx syscon driver:
- reboot
- pinctrl
- clock
They all require access to DEVCFG register with a shared lock held, to
avoid conflict writing to swlocked parts of DEVCFG.
Provide common resources such as base, regmap and spinlock via auxiliary
bus framework.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
include/linux/soc/cirrus/ep93xx.h | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h
index 56fbe2dc59b1..fc35be3af723 100644
--- a/include/linux/soc/cirrus/ep93xx.h
+++ b/include/linux/soc/cirrus/ep93xx.h
@@ -3,6 +3,18 @@
#define _SOC_EP93XX_H
struct platform_device;
+struct regmap;
+
+enum ep93xx_soc_model {
+ EP93XX_9301_SOC,
+ EP93XX_9307_SOC,
+ EP93XX_9312_SOC
+};
+
+#include <linux/auxiliary_bus.h>
+#include <linux/compiler_types.h>
+#include <linux/container_of.h>
+#include <linux/spinlock.h>
#define EP93XX_CHIP_REV_D0 3
#define EP93XX_CHIP_REV_D1 4
@@ -10,6 +22,20 @@ struct platform_device;
#define EP93XX_CHIP_REV_E1 6
#define EP93XX_CHIP_REV_E2 7
+struct ep93xx_regmap_adev {
+ struct auxiliary_device adev;
+ struct regmap *map;
+ void __iomem *base;
+ spinlock_t *lock;
+ void (*write)(struct regmap *map, spinlock_t *lock, unsigned int reg,
+ unsigned int val);
+ void (*update_bits)(struct regmap *map, spinlock_t *lock,
+ unsigned int reg, unsigned int mask, unsigned int val);
+};
+
+#define to_ep93xx_regmap_adev(_adev) \
+ container_of((_adev), struct ep93xx_regmap_adev, adev)
+
#ifdef CONFIG_ARCH_EP93XX
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
void ep93xx_pwm_release_gpio(struct platform_device *pdev);
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 04/40] clk: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (2 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 03/40] ARM: ep93xx: add regmap aux_dev Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 17:42 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 05/40] pinctrl: add a Cirrus ep93xx SoC pin controller Nikita Shubin via B4 Relay
` (37 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd; +Cc: linux-kernel, linux-clk, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Rewrite EP93xx clock driver located in arch/arm/mach-ep93xx/clock.c
trying to do everything the device tree way:
- provide clock acces via of
- drop clk_hw_register_clkdev
- drop init code and use module_auxiliary_driver
Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/clk/Kconfig | 8 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-ep93xx.c | 849 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 858 insertions(+)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c30d0d396f7a..8662ef0b7f96 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -218,6 +218,14 @@ config COMMON_CLK_EN7523
This driver provides the fixed clocks and gates present on Airoha
ARM silicon.
+config COMMON_CLK_EP93XX
+ bool "Clock driver for Cirrus Logic ep93xx SoC"
+ depends on ARCH_EP93XX || COMPILE_TEST
+ select MFD_SYSCON
+ select REGMAP
+ help
+ This driver supports the SoC clocks on the Cirrus Logic ep93xx.
+
config COMMON_CLK_FSL_FLEXSPI
tristate "Clock driver for FlexSPI on Layerscape SoCs"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ed71f2e0ee36..ac0f2d2f544a 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
+obj-$(CONFIG_COMMON_CLK_EP93XX) += clk-ep93xx.o
obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o
obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o
obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
diff --git a/drivers/clk/clk-ep93xx.c b/drivers/clk/clk-ep93xx.c
new file mode 100644
index 000000000000..17d5ddd84dee
--- /dev/null
+++ b/drivers/clk/clk-ep93xx.c
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Clock control for Cirrus EP93xx chips.
+ * Copyright (C) 2021 Nikita Shubin <nikita.shubin@maquefel.me>
+ *
+ * Based on a rewrite of arch/arm/mach-ep93xx/clock.c:
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
+#include <linux/bits.h>
+#include <linux/cleanup.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <linux/sys_soc.h>
+
+#include <linux/soc/cirrus/ep93xx.h>
+#include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+
+#include <asm/div64.h>
+
+#define EP93XX_EXT_CLK_RATE 14745600
+#define EP93XX_EXT_RTC_RATE 32768
+
+#define EP93XX_SYSCON_POWER_STATE 0x00
+#define EP93XX_SYSCON_PWRCNT 0x04
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD BIT(29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN 28
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 27
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 26
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 25
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 24
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 23
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 22
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 21
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 20
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 19
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 18
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 17
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 16
+#define EP93XX_SYSCON_CLKSET1 0x20
+#define EP93XX_SYSCON_CLKSET1_NBYP1 BIT(23)
+#define EP93XX_SYSCON_CLKSET2 0x24
+#define EP93XX_SYSCON_CLKSET2_NBYP2 BIT(19)
+#define EP93XX_SYSCON_CLKSET2_PLL2_EN BIT(18)
+#define EP93XX_SYSCON_DEVCFG 0x80
+#define EP93XX_SYSCON_DEVCFG_U3EN 24
+#define EP93XX_SYSCON_DEVCFG_U2EN 20
+#define EP93XX_SYSCON_DEVCFG_U1EN 18
+#define EP93XX_SYSCON_VIDCLKDIV 0x84
+#define EP93XX_SYSCON_CLKDIV_ENABLE 15
+#define EP93XX_SYSCON_CLKDIV_ESEL BIT(14)
+#define EP93XX_SYSCON_CLKDIV_PSEL BIT(13)
+#define EP93XX_SYSCON_CLKDIV_MASK GENMASK(14, 13)
+#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8
+#define EP93XX_SYSCON_I2SCLKDIV 0x8c
+#define EP93XX_SYSCON_I2SCLKDIV_SENA 31
+#define EP93XX_SYSCON_I2SCLKDIV_ORIDE BIT(29)
+#define EP93XX_SYSCON_I2SCLKDIV_SPOL BIT(19)
+#define EP93XX_I2SCLKDIV_SDIV (1 << 16)
+#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17)
+#define EP93XX_SYSCON_KEYTCHCLKDIV 0x90
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN 31
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV 16
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN 15
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV 0
+#define EP93XX_SYSCON_CHIPID 0x94
+#define EP93XX_SYSCON_CHIPID_ID 0x9213
+
+static const char adc_divisors[] = { 16, 4 };
+static const char sclk_divisors[] = { 2, 4 };
+static const char lrclk_divisors[] = { 32, 64, 128 };
+
+struct ep93xx_clk {
+ struct clk_hw hw;
+ u16 idx;
+ u16 reg;
+ u32 mask;
+ u8 bit_idx;
+ u8 shift;
+ u8 width;
+ u8 num_div;
+ const char *div;
+};
+
+struct ep93xx_clk_priv {
+ spinlock_t lock;
+ struct ep93xx_regmap_adev *aux_dev;
+ struct device *dev;
+ void __iomem *base;
+ struct regmap *map;
+ struct clk_hw *fixed[21];
+ struct ep93xx_clk reg[];
+};
+
+static struct ep93xx_clk *ep93xx_clk_from(struct clk_hw *hw)
+{
+ return container_of(hw, struct ep93xx_clk, hw);
+}
+
+static struct ep93xx_clk_priv *ep93xx_priv_from(struct ep93xx_clk *clk)
+{
+ return container_of(clk, struct ep93xx_clk_priv, reg[clk->idx]);
+}
+
+static void ep93xx_clk_write(struct ep93xx_clk_priv *priv, unsigned int reg, unsigned int val)
+{
+ struct ep93xx_regmap_adev *aux = priv->aux_dev;
+
+ aux->write(aux->map, aux->lock, reg, val);
+}
+
+static int ep93xx_clk_is_enabled(struct clk_hw *hw)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ u32 val;
+
+ regmap_read(priv->map, clk->reg, &val);
+
+ return !!(val & BIT(clk->bit_idx));
+}
+
+static int ep93xx_clk_enable(struct clk_hw *hw)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ u32 val;
+
+ guard(spinlock_irqsave)(&priv->lock);
+
+ regmap_read(priv->map, clk->reg, &val);
+ val |= BIT(clk->bit_idx);
+
+ ep93xx_clk_write(priv, clk->reg, val);
+
+ return 0;
+}
+
+static void ep93xx_clk_disable(struct clk_hw *hw)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ u32 val;
+
+ guard(spinlock_irqsave)(&priv->lock);
+
+ regmap_read(priv->map, clk->reg, &val);
+ val &= ~BIT(clk->bit_idx);
+
+ ep93xx_clk_write(priv, clk->reg, val);
+}
+
+static const struct clk_ops clk_ep93xx_gate_ops = {
+ .enable = ep93xx_clk_enable,
+ .disable = ep93xx_clk_disable,
+ .is_enabled = ep93xx_clk_is_enabled,
+};
+
+static int ep93xx_clk_register_gate(struct ep93xx_clk *clk,
+ const char *name,
+ struct clk_parent_data *parent_data,
+ unsigned long flags,
+ unsigned int reg,
+ u8 bit_idx)
+{
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ struct clk_init_data init = { };
+
+ init.name = name;
+ init.ops = &clk_ep93xx_gate_ops;
+ init.flags = flags;
+ init.parent_data = parent_data;
+ init.num_parents = 1;
+
+ clk->reg = reg;
+ clk->bit_idx = bit_idx;
+ clk->hw.init = &init;
+
+ return devm_clk_hw_register(priv->dev, &clk->hw);
+}
+
+static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ u32 val;
+
+ regmap_read(priv->map, clk->reg, &val);
+
+ val &= EP93XX_SYSCON_CLKDIV_MASK;
+
+ switch (val) {
+ case EP93XX_SYSCON_CLKDIV_ESEL:
+ return 1; /* PLL1 */
+ case EP93XX_SYSCON_CLKDIV_MASK:
+ return 2; /* PLL2 */
+ default:
+ break;
+ };
+
+ return 0; /* XTALI */
+}
+
+static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ unsigned long flags;
+ u32 val;
+
+ if (index >= 3)
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ regmap_read(priv->map, clk->reg, &val);
+ val &= ~(EP93XX_SYSCON_CLKDIV_MASK);
+ val |= index > 0 ? EP93XX_SYSCON_CLKDIV_ESEL : 0;
+ val |= index > 1 ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
+
+ ep93xx_clk_write(priv, clk->reg, val);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static bool is_best(unsigned long rate, unsigned long now,
+ unsigned long best)
+{
+ return abs_diff(rate, now) < abs_diff(rate, best);
+}
+
+static int ep93xx_mux_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ unsigned long best_rate = 0, actual_rate, mclk_rate;
+ unsigned long rate = req->rate;
+ struct clk_hw *parent_best = NULL;
+ unsigned long parent_rate_best;
+ unsigned long parent_rate;
+ int div, pdiv;
+ unsigned int i;
+
+ /*
+ * Try the two pll's and the external clock
+ * Because the valid predividers are 2, 2.5 and 3, we multiply
+ * all the clocks by 2 to avoid floating point math.
+ *
+ * This is based on the algorithm in the ep93xx raster guide:
+ * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
+ *
+ */
+ for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+ struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
+
+ parent_rate = clk_hw_get_rate(parent);
+ mclk_rate = parent_rate * 2;
+
+ /* Try each predivider value */
+ for (pdiv = 4; pdiv <= 6; pdiv++) {
+ div = DIV_ROUND_CLOSEST(mclk_rate, rate * pdiv);
+ if (!in_range(div, 1, 127))
+ continue;
+
+ actual_rate = DIV_ROUND_CLOSEST(mclk_rate, pdiv * div);
+ if (is_best(rate, actual_rate, best_rate)) {
+ best_rate = actual_rate;
+ parent_rate_best = parent_rate;
+ parent_best = parent;
+ }
+ }
+ }
+
+ if (!parent_best)
+ return -EINVAL;
+
+ req->best_parent_rate = parent_rate_best;
+ req->best_parent_hw = parent_best;
+ req->rate = best_rate;
+
+ return 0;
+}
+
+static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ unsigned int pdiv, div;
+ u32 val;
+
+ regmap_read(priv->map, clk->reg, &val);
+ pdiv = (val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & GENMASK(1, 0);
+ div = val & GENMASK(6, 0);
+ if (!div)
+ return 0;
+
+ return DIV_ROUND_CLOSEST(parent_rate * 2, (pdiv + 3) * div);
+}
+
+static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ int pdiv, div, npdiv, ndiv;
+ unsigned long actual_rate, mclk_rate, rate_err = ULONG_MAX;
+ u32 val;
+
+ regmap_read(priv->map, clk->reg, &val);
+ mclk_rate = parent_rate * 2;
+
+ for (pdiv = 4; pdiv <= 6; pdiv++) {
+ div = DIV_ROUND_CLOSEST(mclk_rate, rate * pdiv);
+ if (!in_range(div, 1, 127))
+ continue;
+
+ actual_rate = DIV_ROUND_CLOSEST(mclk_rate, pdiv * div);
+ if (abs(actual_rate - rate) < rate_err) {
+ npdiv = pdiv - 3;
+ ndiv = div;
+ rate_err = abs(actual_rate - rate);
+ }
+ }
+
+ if (rate_err == ULONG_MAX)
+ return -EINVAL;
+
+ /*
+ * Clear old dividers
+ * Bit 7 is reserved bit in all ClkDiv registers
+ */
+ val &= ~(GENMASK(9, 0) & ~BIT(7));
+
+ /* Set the new pdiv and div bits for the new clock rate */
+ val |= (npdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | ndiv;
+
+ ep93xx_clk_write(priv, clk->reg, val);
+
+ return 0;
+}
+
+static const struct clk_ops clk_ddiv_ops = {
+ .enable = ep93xx_clk_enable,
+ .disable = ep93xx_clk_disable,
+ .is_enabled = ep93xx_clk_is_enabled,
+ .get_parent = ep93xx_mux_get_parent,
+ .set_parent = ep93xx_mux_set_parent_lock,
+ .determine_rate = ep93xx_mux_determine_rate,
+ .recalc_rate = ep93xx_ddiv_recalc_rate,
+ .set_rate = ep93xx_ddiv_set_rate,
+};
+
+static int clk_hw_register_ddiv(struct ep93xx_clk *clk,
+ const char *name,
+ struct clk_parent_data *parent_data,
+ u8 num_parents,
+ unsigned int reg,
+ u8 bit_idx)
+{
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ struct clk_init_data init = { };
+
+ init.name = name;
+ init.ops = &clk_ddiv_ops;
+ init.flags = 0;
+ init.parent_data = parent_data;
+ init.num_parents = num_parents;
+
+ clk->reg = reg;
+ clk->bit_idx = bit_idx;
+ clk->hw.init = &init;
+
+ return devm_clk_hw_register(priv->dev, &clk->hw);
+}
+
+static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ u32 val;
+ u8 index;
+
+ regmap_read(priv->map, clk->reg, &val);
+ index = (val & clk->mask) >> clk->shift;
+ if (index > clk->num_div)
+ return 0;
+
+ return DIV_ROUND_CLOSEST(parent_rate, clk->div[index]);
+}
+
+static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ unsigned long best = 0, now;
+ unsigned int i;
+
+ for (i = 0; i < clk->num_div; i++) {
+ if ((rate * clk->div[i]) == *parent_rate)
+ return rate;
+
+ now = DIV_ROUND_CLOSEST(*parent_rate, clk->div[i]);
+ if (!best || is_best(rate, now, best))
+ best = now;
+ }
+
+ return best;
+}
+
+static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct ep93xx_clk *clk = ep93xx_clk_from(hw);
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ unsigned int i;
+ u32 val;
+
+ regmap_read(priv->map, clk->reg, &val);
+ val &= ~clk->mask;
+ for (i = 0; i < clk->num_div; i++)
+ if (rate == DIV_ROUND_CLOSEST(parent_rate, clk->div[i]))
+ break;
+
+ if (i == clk->num_div)
+ return -EINVAL;
+
+ val |= i << clk->shift;
+
+ ep93xx_clk_write(priv, clk->reg, val);
+
+ return 0;
+}
+
+static const struct clk_ops ep93xx_div_ops = {
+ .enable = ep93xx_clk_enable,
+ .disable = ep93xx_clk_disable,
+ .is_enabled = ep93xx_clk_is_enabled,
+ .recalc_rate = ep93xx_div_recalc_rate,
+ .round_rate = ep93xx_div_round_rate,
+ .set_rate = ep93xx_div_set_rate,
+};
+
+static int clk_hw_register_div(struct ep93xx_clk *clk,
+ const char *name,
+ struct clk_parent_data *parent_data,
+ unsigned int reg,
+ u8 enable_bit,
+ u8 shift,
+ u8 width,
+ const char *clk_divisors,
+ u8 num_div)
+{
+ struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
+ struct clk_init_data init = { };
+
+ init.name = name;
+ init.ops = &ep93xx_div_ops;
+ init.flags = 0;
+ init.parent_data = parent_data;
+ init.num_parents = 1;
+
+ clk->reg = reg;
+ clk->bit_idx = enable_bit;
+ clk->mask = GENMASK(shift + width - 1, shift);
+ clk->shift = shift;
+ clk->div = clk_divisors;
+ clk->num_div = num_div;
+ clk->hw.init = &init;
+
+ return devm_clk_hw_register(priv->dev, &clk->hw);
+}
+
+struct ep93xx_gate {
+ unsigned int idx;
+ unsigned int bit;
+ const char *name;
+};
+
+static const struct ep93xx_gate ep93xx_uarts[] = {
+ { EP93XX_CLK_UART1, EP93XX_SYSCON_DEVCFG_U1EN, "uart1" },
+ { EP93XX_CLK_UART2, EP93XX_SYSCON_DEVCFG_U2EN, "uart2" },
+ { EP93XX_CLK_UART3, EP93XX_SYSCON_DEVCFG_U3EN, "uart3" },
+};
+
+static int ep93xx_uart_clock_init(struct ep93xx_clk_priv *priv)
+{
+ struct clk_parent_data parent_data = { };
+ unsigned int i, idx, ret, clk_uart_div;
+ struct ep93xx_clk *clk;
+ u32 val;
+
+ regmap_read(priv->map, EP93XX_SYSCON_PWRCNT, &val);
+ if (val & EP93XX_SYSCON_PWRCNT_UARTBAUD)
+ clk_uart_div = 1;
+ else
+ clk_uart_div = 2;
+
+ priv->fixed[EP93XX_CLK_UART] =
+ clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div);
+ parent_data.hw = priv->fixed[EP93XX_CLK_UART];
+
+ /* parenting uart gate clocks to uart clock */
+ for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) {
+ idx = ep93xx_uarts[i].idx - EP93XX_CLK_UART1;
+ clk = &priv->reg[idx];
+ clk->idx = idx;
+ ret = ep93xx_clk_register_gate(clk,
+ ep93xx_uarts[i].name,
+ &parent_data, CLK_SET_RATE_PARENT,
+ EP93XX_SYSCON_DEVCFG,
+ ep93xx_uarts[i].bit);
+ if (ret)
+ return dev_err_probe(priv->dev, ret,
+ "failed to register uart[%d] clock\n", i);
+ }
+
+ return 0;
+}
+
+static const struct ep93xx_gate ep93xx_dmas[] = {
+ { EP93XX_CLK_M2M0, EP93XX_SYSCON_PWRCNT_DMA_M2M0, "m2m0" },
+ { EP93XX_CLK_M2M1, EP93XX_SYSCON_PWRCNT_DMA_M2M1, "m2m1" },
+ { EP93XX_CLK_M2P0, EP93XX_SYSCON_PWRCNT_DMA_M2P0, "m2p0" },
+ { EP93XX_CLK_M2P1, EP93XX_SYSCON_PWRCNT_DMA_M2P1, "m2p1" },
+ { EP93XX_CLK_M2P2, EP93XX_SYSCON_PWRCNT_DMA_M2P2, "m2p2" },
+ { EP93XX_CLK_M2P3, EP93XX_SYSCON_PWRCNT_DMA_M2P3, "m2p3" },
+ { EP93XX_CLK_M2P4, EP93XX_SYSCON_PWRCNT_DMA_M2P4, "m2p4" },
+ { EP93XX_CLK_M2P5, EP93XX_SYSCON_PWRCNT_DMA_M2P5, "m2p5" },
+ { EP93XX_CLK_M2P6, EP93XX_SYSCON_PWRCNT_DMA_M2P6, "m2p6" },
+ { EP93XX_CLK_M2P7, EP93XX_SYSCON_PWRCNT_DMA_M2P7, "m2p7" },
+ { EP93XX_CLK_M2P8, EP93XX_SYSCON_PWRCNT_DMA_M2P8, "m2p8" },
+ { EP93XX_CLK_M2P9, EP93XX_SYSCON_PWRCNT_DMA_M2P9, "m2p9" },
+};
+
+static int ep93xx_dma_clock_init(struct ep93xx_clk_priv *priv)
+{
+ struct clk_parent_data parent_data = { };
+ unsigned int i, idx;
+
+ parent_data.hw = priv->fixed[EP93XX_CLK_HCLK];
+ for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) {
+ idx = ep93xx_dmas[i].idx;
+ priv->fixed[idx] = devm_clk_hw_register_gate_parent_data(priv->dev,
+ ep93xx_dmas[i].name,
+ &parent_data, 0,
+ priv->base + EP93XX_SYSCON_PWRCNT,
+ ep93xx_dmas[i].bit,
+ 0,
+ &priv->lock);
+ if (IS_ERR(priv->fixed[idx]))
+ return PTR_ERR(priv->fixed[idx]);
+ }
+
+ return 0;
+}
+
+static struct clk_hw *of_clk_ep93xx_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct ep93xx_clk_priv *priv = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx < EP93XX_CLK_UART1)
+ return priv->fixed[idx];
+
+ if (idx <= EP93XX_CLK_I2S_LRCLK)
+ return &priv->reg[idx - EP93XX_CLK_UART1].hw;
+
+ return ERR_PTR(-EINVAL);
+}
+
+/*
+ * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
+ */
+static unsigned long calc_pll_rate(u64 rate, u32 config_word)
+{
+ rate *= ((config_word >> 11) & GENMASK(4, 0)) + 1; /* X1FBD */
+ rate *= ((config_word >> 5) & GENMASK(5, 0)) + 1; /* X2FBD */
+ do_div(rate, (config_word & GENMASK(4, 0)) + 1); /* X2IPD */
+ rate >>= ((config_word >> 16) & GENMASK(1, 0)); /* PS */
+
+ return rate;
+}
+
+static const struct soc_device_attribute ep93xx_soc_table[] = {
+ { .revision = "E2", .data = (void *)1 },
+ { /* sentinel */ }
+};
+
+static int ep93xx_clk_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct ep93xx_regmap_adev *rdev = to_ep93xx_regmap_adev(adev);
+ unsigned int clk_f_div, clk_h_div, clk_p_div, clk_usb_div;
+ const char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
+ const char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
+ const char pclk_divisors[] = { 1, 2, 4, 8 };
+ struct clk_parent_data xtali = { .index = 0 };
+ struct clk_parent_data ddiv_pdata[3] = { };
+ unsigned long clk_pll1_rate, clk_pll2_rate, clk_spi_div;
+ const struct soc_device_attribute *match;
+ struct clk_parent_data pdata = {};
+ struct device *dev = &adev->dev;
+ struct ep93xx_clk_priv *priv;
+ struct ep93xx_clk *clk;
+ struct clk_hw *hw, *pll1;
+ unsigned int idx;
+ int ret;
+ u32 value;
+
+ priv = devm_kzalloc(dev, struct_size(priv, reg, 10), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ priv->dev = dev;
+ priv->aux_dev = rdev;
+ priv->map = rdev->map;
+ priv->base = rdev->base;
+
+ /* Determine the bootloader configured pll1 rate */
+ regmap_read(priv->map, EP93XX_SYSCON_CLKSET1, &value);
+
+ if (value & EP93XX_SYSCON_CLKSET1_NBYP1)
+ clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
+ else
+ clk_pll1_rate = EP93XX_EXT_CLK_RATE;
+
+ pll1 = devm_clk_hw_register_fixed_rate(dev, "pll1", "xtali", 0, clk_pll1_rate);
+ if (IS_ERR(pll1))
+ return PTR_ERR(pll1);
+
+ priv->fixed[EP93XX_CLK_PLL1] = pll1;
+
+ /* Initialize the pll1 derived clocks */
+ clk_f_div = fclk_divisors[(value >> 25) & GENMASK(2, 0)];
+ clk_h_div = hclk_divisors[(value >> 20) & GENMASK(2, 0)];
+ clk_p_div = pclk_divisors[(value >> 18) & GENMASK(1, 0)];
+
+ hw = devm_clk_hw_register_fixed_factor_parent_hw(dev, "fclk", pll1, 0, 1, clk_f_div);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ priv->fixed[EP93XX_CLK_FCLK] = hw;
+
+ hw = devm_clk_hw_register_fixed_factor_parent_hw(dev, "hclk", pll1, 0, 1, clk_h_div);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ priv->fixed[EP93XX_CLK_HCLK] = hw;
+
+ hw = devm_clk_hw_register_fixed_factor_parent_hw(dev, "pclk", hw, 0, 1, clk_p_div);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ priv->fixed[EP93XX_CLK_PCLK] = hw;
+
+ /* Determine the bootloader configured pll2 rate */
+ regmap_read(priv->map, EP93XX_SYSCON_CLKSET2, &value);
+ if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
+ clk_pll2_rate = EP93XX_EXT_CLK_RATE;
+ else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
+ clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
+ else
+ clk_pll2_rate = 0;
+
+ hw = devm_clk_hw_register_fixed_rate(dev, "pll2", "xtali", 0, clk_pll2_rate);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ priv->fixed[EP93XX_CLK_PLL2] = hw;
+
+ regmap_read(priv->map, EP93XX_SYSCON_CLKSET2, &value);
+ clk_usb_div = (value >> 28 & GENMASK(3, 0)) + 1;
+ hw = devm_clk_hw_register_fixed_factor(dev, "usb_clk", "pll2", 0, 1, clk_usb_div);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ priv->fixed[EP93XX_CLK_USB] = hw;
+
+ ret = ep93xx_uart_clock_init(priv);
+ if (ret)
+ return ret;
+
+ ret = ep93xx_dma_clock_init(priv);
+ if (ret)
+ return ret;
+
+ /*
+ * EP93xx SSP clock rate was doubled in version E2. For more information
+ * see:
+ * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+ */
+ clk_spi_div = 2;
+ match = soc_device_match(ep93xx_soc_table);
+ if (match)
+ clk_spi_div = (unsigned long)match->data;
+
+ hw = devm_clk_hw_register_fixed_factor(dev, "ep93xx-spi.0", "xtali",
+ 0, 1, clk_spi_div);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ priv->fixed[EP93XX_CLK_SPI] = hw;
+
+ /* PWM clock */
+ hw = devm_clk_hw_register_fixed_factor(dev, "pwm_clk", "xtali", 0, 1, 1);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ priv->fixed[EP93XX_CLK_PWM] = hw;
+
+ /* USB clock */
+ hw = devm_clk_hw_register_gate(priv->dev, "ohci-platform", "usb_clk",
+ 0, priv->base + EP93XX_SYSCON_PWRCNT,
+ EP93XX_SYSCON_PWRCNT_USH_EN, 0,
+ &priv->lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ priv->fixed[EP93XX_CLK_USB] = hw;
+
+ ddiv_pdata[0].index = 0; /* XTALI external clock */
+ ddiv_pdata[1].hw = priv->fixed[EP93XX_CLK_PLL1];
+ ddiv_pdata[2].hw = priv->fixed[EP93XX_CLK_PLL2];
+
+ /* touchscreen/adc clock */
+ idx = EP93XX_CLK_ADC - EP93XX_CLK_UART1;
+ clk = &priv->reg[idx];
+ clk->idx = idx;
+ ret = clk_hw_register_div(clk, "ep93xx-adc", &xtali,
+ EP93XX_SYSCON_KEYTCHCLKDIV,
+ EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
+ EP93XX_SYSCON_KEYTCHCLKDIV_ADIV,
+ 1,
+ adc_divisors,
+ ARRAY_SIZE(adc_divisors));
+
+
+ /* keypad clock */
+ idx = EP93XX_CLK_KEYPAD - EP93XX_CLK_UART1;
+ clk = &priv->reg[idx];
+ clk->idx = idx;
+ ret = clk_hw_register_div(clk, "ep93xx-keypad", &xtali,
+ EP93XX_SYSCON_KEYTCHCLKDIV,
+ EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+ EP93XX_SYSCON_KEYTCHCLKDIV_KDIV,
+ 1,
+ adc_divisors,
+ ARRAY_SIZE(adc_divisors));
+
+ /*
+ * On reset PDIV and VDIV is set to zero, while PDIV zero
+ * means clock disable, VDIV shouldn't be zero.
+ * So we set both video and is2 dividers to minimum.
+ * ENA - Enable CLK divider.
+ * PDIV - 00 - Disable clock
+ * VDIV - at least 2
+ */
+
+ /* Check and enable video clk registers */
+ regmap_read(priv->map, EP93XX_SYSCON_VIDCLKDIV, &value);
+ value |= BIT(EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
+ ep93xx_clk_write(priv, EP93XX_SYSCON_VIDCLKDIV, value);
+
+ /* Check and enable i2s clk registers */
+ regmap_read(priv->map, EP93XX_SYSCON_I2SCLKDIV, &value);
+ value |= BIT(EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
+
+ /*
+ * Override the SAI_MSTR_CLK_CFG from the I2S block and use the
+ * I2SClkDiv Register settings. LRCLK transitions on the falling SCLK
+ * edge.
+ */
+ value |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
+ ep93xx_clk_write(priv, EP93XX_SYSCON_I2SCLKDIV, value);
+
+ /* video clk */
+ idx = EP93XX_CLK_VIDEO - EP93XX_CLK_UART1;
+ clk = &priv->reg[idx];
+ clk->idx = idx;
+ ret = clk_hw_register_ddiv(clk, "ep93xx-fb",
+ ddiv_pdata, ARRAY_SIZE(ddiv_pdata),
+ EP93XX_SYSCON_VIDCLKDIV,
+ EP93XX_SYSCON_CLKDIV_ENABLE);
+
+ /* i2s clk */
+ idx = EP93XX_CLK_I2S_MCLK - EP93XX_CLK_UART1;
+ clk = &priv->reg[idx];
+ clk->idx = idx;
+ ret = clk_hw_register_ddiv(clk, "mclk",
+ ddiv_pdata, ARRAY_SIZE(ddiv_pdata),
+ EP93XX_SYSCON_I2SCLKDIV,
+ EP93XX_SYSCON_CLKDIV_ENABLE);
+
+ /* i2s sclk */
+ idx = EP93XX_CLK_I2S_SCLK - EP93XX_CLK_UART1;
+ clk = &priv->reg[idx];
+ clk->idx = idx;
+ pdata.hw = &priv->reg[EP93XX_CLK_I2S_MCLK - EP93XX_CLK_UART1].hw;
+ ret = clk_hw_register_div(clk, "sclk", &pdata,
+ EP93XX_SYSCON_I2SCLKDIV,
+ EP93XX_SYSCON_I2SCLKDIV_SENA,
+ 16, /* EP93XX_I2SCLKDIV_SDIV_SHIFT */
+ 1, /* EP93XX_I2SCLKDIV_SDIV_WIDTH */
+ sclk_divisors,
+ ARRAY_SIZE(sclk_divisors));
+
+ /* i2s lrclk */
+ idx = EP93XX_CLK_I2S_LRCLK - EP93XX_CLK_UART1;
+ clk = &priv->reg[idx];
+ clk->idx = idx;
+ pdata.hw = &priv->reg[EP93XX_CLK_I2S_SCLK - EP93XX_CLK_UART1].hw;
+ ret = clk_hw_register_div(clk, "lrclk", &pdata,
+ EP93XX_SYSCON_I2SCLKDIV,
+ EP93XX_SYSCON_I2SCLKDIV_SENA,
+ 17, /* EP93XX_I2SCLKDIV_LRDIV32_SHIFT */
+ 2, /* EP93XX_I2SCLKDIV_LRDIV32_WIDTH */
+ lrclk_divisors,
+ ARRAY_SIZE(lrclk_divisors));
+
+ /* IrDa clk uses same pattern but no init code presents in original clock driver */
+ return devm_of_clk_add_hw_provider(priv->dev, of_clk_ep93xx_get, priv);
+}
+
+static const struct auxiliary_device_id ep93xx_clk_ids[] = {
+ {
+ .name = "soc_ep93xx.clk-ep93xx",
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, ep93xx_clk_ids);
+
+static struct auxiliary_driver ep93xx_clk_driver = {
+ .probe = ep93xx_clk_probe,
+ .id_table = ep93xx_clk_ids,
+};
+module_auxiliary_driver(ep93xx_clk_driver);
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 05/40] pinctrl: add a Cirrus ep93xx SoC pin controller
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (3 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 04/40] clk: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 17:51 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 06/40] power: reset: Add a driver for the ep93xx reset Nikita Shubin via B4 Relay
` (36 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Linus Walleij; +Cc: linux-kernel, linux-gpio, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add a pin control (only multiplexing) driver for ep93xx SoC so
we can fully convert ep93xx to device tree.
This driver is capable of muxing ep9301/ep9302/ep9307/ep9312/ep9315
variants, this is chosen based on "compatible" in device tree.
Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/Kconfig | 7 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ep93xx.c | 1430 ++++++++++++++++++++++++++++++++++++++
3 files changed, 1438 insertions(+)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 1de4e1edede0..1464f14670e8 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -176,6 +176,13 @@ config PINCTRL_DIGICOLOR
select PINMUX
select GENERIC_PINCONF
+config PINCTRL_EP93XX
+ bool
+ depends on ARCH_EP93XX || COMPILE_TEST
+ select PINMUX
+ select GENERIC_PINCONF
+ select MFD_SYSCON
+
config PINCTRL_EQUILIBRIUM
tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC"
depends on OF && HAS_IOMEM
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 37575deb7a69..c3c243c7a763 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
obj-$(CONFIG_PINCTRL_DA9062) += pinctrl-da9062.o
obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o
obj-$(CONFIG_PINCTRL_EQUILIBRIUM) += pinctrl-equilibrium.o
+obj-$(CONFIG_PINCTRL_EP93XX) += pinctrl-ep93xx.o
obj-$(CONFIG_PINCTRL_GEMINI) += pinctrl-gemini.o
obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o
obj-$(CONFIG_PINCTRL_K210) += pinctrl-k210.o
diff --git a/drivers/pinctrl/pinctrl-ep93xx.c b/drivers/pinctrl/pinctrl-ep93xx.c
new file mode 100644
index 000000000000..bfaaab63363a
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ep93xx.c
@@ -0,0 +1,1430 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the EP93xx pin controller
+ * based on linux/drivers/pinctrl/pinmux-gemini.c
+ *
+ * Copyright (C) 2022 Nikita Shubin <nikita.shubin@maquefel.me>
+ *
+ * This is a group-only pin controller.
+ */
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#include <linux/soc/cirrus/ep93xx.h>
+
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "pinctrl-utils.h"
+
+#define DRIVER_NAME "pinctrl-ep93xx"
+
+enum ep93xx_pinctrl_model {
+ EP93XX_9301_PINCTRL,
+ EP93XX_9307_PINCTRL,
+ EP93XX_9312_PINCTRL,
+};
+
+struct ep93xx_pmx {
+ struct device *dev;
+ struct pinctrl_dev *pctl;
+ struct ep93xx_regmap_adev *aux_dev;
+ struct regmap *map;
+ enum ep93xx_pinctrl_model model;
+};
+
+static void ep93xx_pinctrl_update_bits(struct ep93xx_pmx *pmx, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ struct ep93xx_regmap_adev *aux = pmx->aux_dev;
+
+ aux->update_bits(aux->map, aux->lock, reg, mask, val);
+}
+
+struct ep93xx_pin_group {
+ struct pingroup grp;
+ u32 mask;
+ u32 value;
+};
+
+#define PMX_GROUP(_name, _pins, _mask, _value) \
+ { \
+ .grp = PINCTRL_PINGROUP(_name, _pins, ARRAY_SIZE(_pins)), \
+ .mask = _mask, \
+ .value = _value, \
+ }
+
+#define EP93XX_SYSCON_DEVCFG 0x80
+
+/*
+ * There are several system configuration options selectable by the DeviceCfg and SysCfg
+ * registers. These registers provide the selection of several pin multiplexing options and also
+ * provide software access to the system reset configuration options. Please refer to the
+ * descriptions of the registers, “DeviceCfg” on page 5-25 and “SysCfg” on page 5-34, for a
+ * detailed explanation.
+ */
+#define EP93XX_SYSCON_DEVCFG_D1ONG BIT(30) /* not used */
+#define EP93XX_SYSCON_DEVCFG_D0ONG BIT(29) /* not used */
+#define EP93XX_SYSCON_DEVCFG_IONU2 BIT(28) /* not used */
+#define EP93XX_SYSCON_DEVCFG_GONK BIT(27) /* done */
+#define EP93XX_SYSCON_DEVCFG_TONG BIT(26) /* not used */
+#define EP93XX_SYSCON_DEVCFG_MONG BIT(25) /* not used */
+#define EP93XX_SYSCON_DEVCFG_A2ONG BIT(22) /* not used */
+#define EP93XX_SYSCON_DEVCFG_A1ONG BIT(21) /* not used */
+#define EP93XX_SYSCON_DEVCFG_HONIDE BIT(11) /* done */
+#define EP93XX_SYSCON_DEVCFG_GONIDE BIT(10) /* done */
+#define EP93XX_SYSCON_DEVCFG_PONG BIT(9) /* done */
+#define EP93XX_SYSCON_DEVCFG_EONIDE BIT(8) /* done */
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP BIT(7) /* done */
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97 BIT(6) /* done */
+#define EP93XX_SYSCON_DEVCFG_RASONP3 BIT(4) /* done */
+
+#define PADS_MASK (GENMASK(30, 25) | BIT(22) | BIT(21) | GENMASK(11, 6) | BIT(4))
+#define PADS_MAXBIT 30
+
+/* Ordered by bit index */
+static const char * const ep93xx_padgroups[] = {
+ NULL, NULL, NULL, NULL,
+ "RasOnP3",
+ NULL,
+ "I2SonAC97",
+ "I2SonSSP",
+ "EonIDE",
+ "PonG",
+ "GonIDE",
+ "HonIDE",
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "A1onG",
+ "A2onG",
+ NULL, NULL,
+ "MonG",
+ "TonG",
+ "GonK",
+ "IonU2",
+ "D0onG",
+ "D1onG",
+};
+
+/* ep9301, ep9302 */
+static const struct pinctrl_pin_desc ep9301_pins[] = {
+ PINCTRL_PIN(1, "CSn[7]"),
+ PINCTRL_PIN(2, "CSn[6]"),
+ PINCTRL_PIN(3, "CSn[3]"),
+ PINCTRL_PIN(4, "CSn[2]"),
+ PINCTRL_PIN(5, "CSn[1]"),
+ PINCTRL_PIN(6, "AD[25]"),
+ PINCTRL_PIN(7, "vdd_ring"),
+ PINCTRL_PIN(8, "gnd_ring"),
+ PINCTRL_PIN(9, "AD[24]"),
+ PINCTRL_PIN(10, "SDCLK"),
+ PINCTRL_PIN(11, "AD[23]"),
+ PINCTRL_PIN(12, "vdd_core"),
+ PINCTRL_PIN(13, "gnd_core"),
+ PINCTRL_PIN(14, "SDWEn"),
+ PINCTRL_PIN(15, "SDCSn[3]"),
+ PINCTRL_PIN(16, "SDCSn[2]"),
+ PINCTRL_PIN(17, "SDCSn[1]"),
+ PINCTRL_PIN(18, "SDCSn[0]"),
+ PINCTRL_PIN(19, "vdd_ring"),
+ PINCTRL_PIN(20, "gnd_ring"),
+ PINCTRL_PIN(21, "RASn"),
+ PINCTRL_PIN(22, "CASn"),
+ PINCTRL_PIN(23, "DQMn[1]"),
+ PINCTRL_PIN(24, "DQMn[0]"),
+ PINCTRL_PIN(25, "AD[22]"),
+ PINCTRL_PIN(26, "AD[21]"),
+ PINCTRL_PIN(27, "vdd_ring"),
+ PINCTRL_PIN(28, "gnd_ring"),
+ PINCTRL_PIN(29, "DA[15]"),
+ PINCTRL_PIN(30, "AD[7]"),
+ PINCTRL_PIN(31, "DA[14]"),
+ PINCTRL_PIN(32, "AD[6]"),
+ PINCTRL_PIN(33, "DA[13]"),
+ PINCTRL_PIN(34, "vdd_core"),
+ PINCTRL_PIN(35, "gnd_core"),
+ PINCTRL_PIN(36, "AD[5]"),
+ PINCTRL_PIN(37, "DA[12]"),
+ PINCTRL_PIN(38, "AD[4]"),
+ PINCTRL_PIN(39, "DA[11]"),
+ PINCTRL_PIN(40, "AD[3]"),
+ PINCTRL_PIN(41, "vdd_ring"),
+ PINCTRL_PIN(42, "gnd_ring"),
+ PINCTRL_PIN(43, "DA[10]"),
+ PINCTRL_PIN(44, "AD[2]"),
+ PINCTRL_PIN(45, "DA[9]"),
+ PINCTRL_PIN(46, "AD[1]"),
+ PINCTRL_PIN(47, "DA[8]"),
+ PINCTRL_PIN(48, "AD[0]"),
+ PINCTRL_PIN(49, "vdd_ring"),
+ PINCTRL_PIN(50, "gnd_ring"),
+ PINCTRL_PIN(51, "NC"),
+ PINCTRL_PIN(52, "NC"),
+ PINCTRL_PIN(53, "vdd_ring"),
+ PINCTRL_PIN(54, "gnd_ring"),
+ PINCTRL_PIN(55, "AD[15]"),
+ PINCTRL_PIN(56, "DA[7]"),
+ PINCTRL_PIN(57, "vdd_core"),
+ PINCTRL_PIN(58, "gnd_core"),
+ PINCTRL_PIN(59, "AD[14]"),
+ PINCTRL_PIN(60, "DA[6]"),
+ PINCTRL_PIN(61, "AD[13]"),
+ PINCTRL_PIN(62, "DA[5]"),
+ PINCTRL_PIN(63, "AD[12]"),
+ PINCTRL_PIN(64, "DA[4]"),
+ PINCTRL_PIN(65, "AD[11]"),
+ PINCTRL_PIN(66, "vdd_ring"),
+ PINCTRL_PIN(67, "gnd_ring"),
+ PINCTRL_PIN(68, "DA[3]"),
+ PINCTRL_PIN(69, "AD[10]"),
+ PINCTRL_PIN(70, "DA[2]"),
+ PINCTRL_PIN(71, "AD[9]"),
+ PINCTRL_PIN(72, "DA[1]"),
+ PINCTRL_PIN(73, "AD[8]"),
+ PINCTRL_PIN(74, "DA[0]"),
+ PINCTRL_PIN(75, "DSRn"),
+ PINCTRL_PIN(76, "DTRn"),
+ PINCTRL_PIN(77, "TCK"),
+ PINCTRL_PIN(78, "TDI"),
+ PINCTRL_PIN(79, "TDO"),
+ PINCTRL_PIN(80, "TMS"),
+ PINCTRL_PIN(81, "vdd_ring"),
+ PINCTRL_PIN(82, "gnd_ring"),
+ PINCTRL_PIN(83, "BOOT[1]"),
+ PINCTRL_PIN(84, "BOOT[0]"),
+ PINCTRL_PIN(85, "gnd_ring"),
+ PINCTRL_PIN(86, "NC"),
+ PINCTRL_PIN(87, "EECLK"),
+ PINCTRL_PIN(88, "EEDAT"),
+ PINCTRL_PIN(89, "ASYNC"),
+ PINCTRL_PIN(90, "vdd_core"),
+ PINCTRL_PIN(91, "gnd_core"),
+ PINCTRL_PIN(92, "ASDO"),
+ PINCTRL_PIN(93, "SCLK1"),
+ PINCTRL_PIN(94, "SFRM1"),
+ PINCTRL_PIN(95, "SSPRX1"),
+ PINCTRL_PIN(96, "SSPTX1"),
+ PINCTRL_PIN(97, "GRLED"),
+ PINCTRL_PIN(98, "RDLED"),
+ PINCTRL_PIN(99, "vdd_ring"),
+ PINCTRL_PIN(100, "gnd_ring"),
+ PINCTRL_PIN(101, "INT[3]"),
+ PINCTRL_PIN(102, "INT[1]"),
+ PINCTRL_PIN(103, "INT[0]"),
+ PINCTRL_PIN(104, "RTSn"),
+ PINCTRL_PIN(105, "USBm[0]"),
+ PINCTRL_PIN(106, "USBp[0]"),
+ PINCTRL_PIN(107, "ABITCLK"),
+ PINCTRL_PIN(108, "CTSn"),
+ PINCTRL_PIN(109, "RXD[0]"),
+ PINCTRL_PIN(110, "RXD[1]"),
+ PINCTRL_PIN(111, "vdd_ring"),
+ PINCTRL_PIN(112, "gnd_ring"),
+ PINCTRL_PIN(113, "TXD[0]"),
+ PINCTRL_PIN(114, "TXD[1]"),
+ PINCTRL_PIN(115, "CGPIO[0]"),
+ PINCTRL_PIN(116, "gnd_core"),
+ PINCTRL_PIN(117, "PLL_GND"),
+ PINCTRL_PIN(118, "XTALI"),
+ PINCTRL_PIN(119, "XTALO"),
+ PINCTRL_PIN(120, "PLL_VDD"),
+ PINCTRL_PIN(121, "vdd_core"),
+ PINCTRL_PIN(122, "gnd_ring"),
+ PINCTRL_PIN(123, "vdd_ring"),
+ PINCTRL_PIN(124, "RSTOn"),
+ PINCTRL_PIN(125, "PRSTn"),
+ PINCTRL_PIN(126, "CSn[0]"),
+ PINCTRL_PIN(127, "gnd_core"),
+ PINCTRL_PIN(128, "vdd_core"),
+ PINCTRL_PIN(129, "gnd_ring"),
+ PINCTRL_PIN(130, "vdd_ring"),
+ PINCTRL_PIN(131, "ADC[4]"),
+ PINCTRL_PIN(132, "ADC[3]"),
+ PINCTRL_PIN(133, "ADC[2]"),
+ PINCTRL_PIN(134, "ADC[1]"),
+ PINCTRL_PIN(135, "ADC[0]"),
+ PINCTRL_PIN(136, "ADC_VDD"),
+ PINCTRL_PIN(137, "RTCXTALI"),
+ PINCTRL_PIN(138, "RTCXTALO"),
+ PINCTRL_PIN(139, "ADC_GND"),
+ PINCTRL_PIN(140, "EGPIO[11]"),
+ PINCTRL_PIN(141, "EGPIO[10]"),
+ PINCTRL_PIN(142, "EGPIO[9]"),
+ PINCTRL_PIN(143, "EGPIO[8]"),
+ PINCTRL_PIN(144, "EGPIO[7]"),
+ PINCTRL_PIN(145, "EGPIO[6]"),
+ PINCTRL_PIN(146, "EGPIO[5]"),
+ PINCTRL_PIN(147, "EGPIO[4]"),
+ PINCTRL_PIN(148, "EGPIO[3]"),
+ PINCTRL_PIN(149, "gnd_ring"),
+ PINCTRL_PIN(150, "vdd_ring"),
+ PINCTRL_PIN(151, "EGPIO[2]"),
+ PINCTRL_PIN(152, "EGPIO[1]"),
+ PINCTRL_PIN(153, "EGPIO[0]"),
+ PINCTRL_PIN(154, "ARSTn"),
+ PINCTRL_PIN(155, "TRSTn"),
+ PINCTRL_PIN(156, "ASDI"),
+ PINCTRL_PIN(157, "USBm[2]"),
+ PINCTRL_PIN(158, "USBp[2]"),
+ PINCTRL_PIN(159, "WAITn"),
+ PINCTRL_PIN(160, "EGPIO[15]"),
+ PINCTRL_PIN(161, "gnd_ring"),
+ PINCTRL_PIN(162, "vdd_ring"),
+ PINCTRL_PIN(163, "EGPIO[14]"),
+ PINCTRL_PIN(164, "EGPIO[13]"),
+ PINCTRL_PIN(165, "EGPIO[12]"),
+ PINCTRL_PIN(166, "gnd_core"),
+ PINCTRL_PIN(167, "vdd_core"),
+ PINCTRL_PIN(168, "FGPIO[3]"),
+ PINCTRL_PIN(169, "FGPIO[2]"),
+ PINCTRL_PIN(170, "FGPIO[1]"),
+ PINCTRL_PIN(171, "gnd_ring"),
+ PINCTRL_PIN(172, "vdd_ring"),
+ PINCTRL_PIN(173, "CLD"),
+ PINCTRL_PIN(174, "CRS"),
+ PINCTRL_PIN(175, "TXERR"),
+ PINCTRL_PIN(176, "TXEN"),
+ PINCTRL_PIN(177, "MIITXD[0]"),
+ PINCTRL_PIN(178, "MIITXD[1]"),
+ PINCTRL_PIN(179, "MIITXD[2]"),
+ PINCTRL_PIN(180, "MIITXD[3]"),
+ PINCTRL_PIN(181, "TXCLK"),
+ PINCTRL_PIN(182, "RXERR"),
+ PINCTRL_PIN(183, "RXDVAL"),
+ PINCTRL_PIN(184, "MIIRXD[0]"),
+ PINCTRL_PIN(185, "MIIRXD[1]"),
+ PINCTRL_PIN(186, "MIIRXD[2]"),
+ PINCTRL_PIN(187, "gnd_ring"),
+ PINCTRL_PIN(188, "vdd_ring"),
+ PINCTRL_PIN(189, "MIIRXD[3]"),
+ PINCTRL_PIN(190, "RXCLK"),
+ PINCTRL_PIN(191, "MDIO"),
+ PINCTRL_PIN(192, "MDC"),
+ PINCTRL_PIN(193, "RDn"),
+ PINCTRL_PIN(194, "WRn"),
+ PINCTRL_PIN(195, "AD[16]"),
+ PINCTRL_PIN(196, "AD[17]"),
+ PINCTRL_PIN(197, "gnd_core"),
+ PINCTRL_PIN(198, "vdd_core"),
+ PINCTRL_PIN(199, "HGPIO[2]"),
+ PINCTRL_PIN(200, "HGPIO[3]"),
+ PINCTRL_PIN(201, "HGPIO[4]"),
+ PINCTRL_PIN(202, "HGPIO[5]"),
+ PINCTRL_PIN(203, "gnd_ring"),
+ PINCTRL_PIN(204, "vdd_ring"),
+ PINCTRL_PIN(205, "AD[18]"),
+ PINCTRL_PIN(206, "AD[19]"),
+ PINCTRL_PIN(207, "AD[20]"),
+ PINCTRL_PIN(208, "SDCLKEN"),
+};
+
+static const unsigned int ssp_ep9301_pins[] = {
+ 93, 94, 95, 96,
+};
+
+static const unsigned int ac97_ep9301_pins[] = {
+ 89, 92, 107, 154, 156,
+};
+
+/*
+ * Note: The EP9307 processor has one PWM with one output, PWMOUT.
+ * Note: The EP9301, EP9302, EP9312, and EP9315 processors each have two PWMs with
+ * two outputs, PWMOUT and PWMO1. PWMO1 is an alternate function for EGPIO14.
+ */
+/* The GPIO14E (14) pin overlap with pwm1 */
+static const unsigned int pwm_9301_pins[] = { 163 };
+
+static const unsigned int gpio1a_9301_pins[] = { 163 };
+
+/* ep9301/9302 have only 0 pin of GPIO C Port exposed */
+static const unsigned int gpio2a_9301_pins[] = { 115 };
+
+/* ep9301/9302 have only 4,5 pin of GPIO E Port exposed */
+static const unsigned int gpio4a_9301_pins[] = { 97, 98 };
+
+/* ep9301/9302 have only 4,5 pin of GPIO G Port exposed */
+static const unsigned int gpio6a_9301_pins[] = { 87, 88 };
+
+static const unsigned int gpio7a_9301_pins[] = { 199, 200, 201, 202 };
+
+/* Groups for the ep9301/ep9302 SoC/package */
+static const struct ep93xx_pin_group ep9301_pin_groups[] = {
+ PMX_GROUP("ssp", ssp_ep9301_pins, EP93XX_SYSCON_DEVCFG_I2SONSSP, 0),
+ PMX_GROUP("i2s_on_ssp", ssp_ep9301_pins, EP93XX_SYSCON_DEVCFG_I2SONSSP,
+ EP93XX_SYSCON_DEVCFG_I2SONSSP),
+ PMX_GROUP("ac97", ac97_ep9301_pins, EP93XX_SYSCON_DEVCFG_I2SONAC97, 0),
+ PMX_GROUP("i2s_on_ac97", ac97_ep9301_pins, EP93XX_SYSCON_DEVCFG_I2SONAC97,
+ EP93XX_SYSCON_DEVCFG_I2SONAC97),
+ PMX_GROUP("pwm1", pwm_9301_pins, EP93XX_SYSCON_DEVCFG_PONG, EP93XX_SYSCON_DEVCFG_PONG),
+ PMX_GROUP("gpio1agrp", gpio1a_9301_pins, EP93XX_SYSCON_DEVCFG_PONG, 0),
+ PMX_GROUP("gpio2agrp", gpio2a_9301_pins, EP93XX_SYSCON_DEVCFG_GONK,
+ EP93XX_SYSCON_DEVCFG_GONK),
+ PMX_GROUP("gpio4agrp", gpio4a_9301_pins, EP93XX_SYSCON_DEVCFG_EONIDE,
+ EP93XX_SYSCON_DEVCFG_EONIDE),
+ PMX_GROUP("gpio6agrp", gpio6a_9301_pins, EP93XX_SYSCON_DEVCFG_GONIDE,
+ EP93XX_SYSCON_DEVCFG_GONIDE),
+ PMX_GROUP("gpio7agrp", gpio7a_9301_pins, EP93XX_SYSCON_DEVCFG_HONIDE,
+ EP93XX_SYSCON_DEVCFG_HONIDE),
+};
+
+static const struct pinctrl_pin_desc ep9307_pins[] = {
+ /* Row A */
+ PINCTRL_PIN(0, "CSn[1]"), /* A1 */
+ PINCTRL_PIN(1, "CSn[7]"), /* A2 */
+ PINCTRL_PIN(2, "SDCLKEN"), /* A3 */
+ PINCTRL_PIN(3, "DA[31]"), /* A4 */
+ PINCTRL_PIN(4, "DA[29]"), /* A5 */
+ PINCTRL_PIN(5, "DA[27]"), /* A6 */
+ PINCTRL_PIN(6, "HGPIO[2]"), /* A7 */
+ PINCTRL_PIN(7, "RDn"), /* A8 */
+ PINCTRL_PIN(8, "MIIRXD[3]"), /* A9 */
+ PINCTRL_PIN(9, "RXDVAL"), /* A10 */
+ PINCTRL_PIN(10, "MIITXD[1]"), /* A11 */
+ PINCTRL_PIN(11, "CRS"), /* A12 */
+ PINCTRL_PIN(12, "FGPIO[7]"), /* A13 */
+ PINCTRL_PIN(13, "FGPIO[0]"), /* A14 */
+ PINCTRL_PIN(14, "WAITn"), /* A15 */
+ PINCTRL_PIN(15, "USBm[2]"), /* A16 */
+ PINCTRL_PIN(16, "ASDI"), /* A17 */
+ /* Row B */
+ PINCTRL_PIN(17, "AD[25]"), /* B1 */
+ PINCTRL_PIN(18, "CSn[2]"), /* B2 */
+ PINCTRL_PIN(19, "CSn[6]"), /* B3 */
+ PINCTRL_PIN(20, "AD[20]"), /* B4 */
+ PINCTRL_PIN(21, "DA[30]"), /* B5 */
+ PINCTRL_PIN(22, "AD[18]"), /* B6 */
+ PINCTRL_PIN(23, "HGPIO[3]"), /* B7 */
+ PINCTRL_PIN(24, "AD[17]"), /* B8 */
+ PINCTRL_PIN(25, "RXCLK"), /* B9 */
+ PINCTRL_PIN(26, "MIIRXD[1]"), /* B10 */
+ PINCTRL_PIN(27, "MIITXD[2]"), /* B11 */
+ PINCTRL_PIN(28, "TXEN"), /* B12 */
+ PINCTRL_PIN(29, "FGPIO[5]"), /* B13 */
+ PINCTRL_PIN(30, "EGPIO[15]"), /* B14 */
+ PINCTRL_PIN(31, "USBp[2]"), /* B15 */
+ PINCTRL_PIN(32, "ARSTn"), /* B16 */
+ PINCTRL_PIN(33, "ADC_VDD"), /* B17 */
+ /* Row C */
+ PINCTRL_PIN(34, "AD[23]"), /* C1 */
+ PINCTRL_PIN(35, "DA[26]"), /* C2 */
+ PINCTRL_PIN(36, "CSn[3]"), /* C3 */
+ PINCTRL_PIN(37, "DA[25]"), /* C4 */
+ PINCTRL_PIN(38, "AD[24]"), /* C5 */
+ PINCTRL_PIN(39, "AD[19]"), /* C6 */
+ PINCTRL_PIN(40, "HGPIO[5]"), /* C7 */
+ PINCTRL_PIN(41, "WRn"), /* C8 */
+ PINCTRL_PIN(42, "MDIO"), /* C9 */
+ PINCTRL_PIN(43, "MIIRXD[2]"), /* C10 */
+ PINCTRL_PIN(44, "TXCLK"), /* C11 */
+ PINCTRL_PIN(45, "MIITXD[0]"), /* C12 */
+ PINCTRL_PIN(46, "CLD"), /* C13 */
+ PINCTRL_PIN(47, "EGPIO[13]"), /* C14 */
+ PINCTRL_PIN(48, "TRSTn"), /* C15 */
+ PINCTRL_PIN(49, "Xp"), /* C16 */
+ PINCTRL_PIN(50, "Xm"), /* C17 */
+ /* Row D */
+ PINCTRL_PIN(51, "SDCSn[3]"), /* D1 */
+ PINCTRL_PIN(52, "DA[23]"), /* D2 */
+ PINCTRL_PIN(53, "SDCLK"), /* D3 */
+ PINCTRL_PIN(54, "DA[24]"), /* D4 */
+ PINCTRL_PIN(55, "HGPIO[7]"), /* D5 */
+ PINCTRL_PIN(56, "HGPIO[6]"), /* D6 */
+ PINCTRL_PIN(57, "A[28]"), /* D7 */
+ PINCTRL_PIN(58, "HGPIO[4]"), /* D8 */
+ PINCTRL_PIN(59, "AD[16]"), /* D9 */
+ PINCTRL_PIN(60, "MDC"), /* D10 */
+ PINCTRL_PIN(61, "RXERR"), /* D11 */
+ PINCTRL_PIN(62, "MIITXD[3]"), /* D12 */
+ PINCTRL_PIN(63, "EGPIO[12]"), /* D13 */
+ PINCTRL_PIN(64, "EGPIO[1]"), /* D14 */
+ PINCTRL_PIN(65, "EGPIO[0]"), /* D15 */
+ PINCTRL_PIN(66, "Ym"), /* D16 */
+ PINCTRL_PIN(67, "Yp"), /* D17 */
+ /* Row E */
+ PINCTRL_PIN(68, "SDCSn[2]"), /* E1 */
+ PINCTRL_PIN(69, "SDWEN"), /* E2 */
+ PINCTRL_PIN(70, "DA[22]"), /* E3 */
+ PINCTRL_PIN(71, "AD[3]"), /* E4 */
+ PINCTRL_PIN(72, "DA[15]"), /* E5 */
+ PINCTRL_PIN(73, "AD[21]"), /* E6 */
+ PINCTRL_PIN(74, "DA[17]"), /* E7 */
+ PINCTRL_PIN(75, "vddr"), /* E8 */
+ PINCTRL_PIN(76, "vddr"), /* E9 */
+ PINCTRL_PIN(77, "vddr"), /* E10 */
+ PINCTRL_PIN(78, "MIIRXD[0]"), /* E11 */
+ PINCTRL_PIN(79, "TXERR"), /* E12 */
+ PINCTRL_PIN(80, "EGPIO[2]"), /* E13 */
+ PINCTRL_PIN(81, "EGPIO[4]"), /* E14 */
+ PINCTRL_PIN(82, "EGPIO[3]"), /* E15 */
+ PINCTRL_PIN(83, "sXp"), /* E16 */
+ PINCTRL_PIN(84, "sXm"), /* E17 */
+ /* Row F */
+ PINCTRL_PIN(85, "RASn"), /* F1 */
+ PINCTRL_PIN(86, "SDCSn[1]"), /* F2 */
+ PINCTRL_PIN(87, "SDCSn[0]"), /* F3 */
+ PINCTRL_PIN(88, "DQMn[3]"), /* F4 */
+ PINCTRL_PIN(89, "AD[5]"), /* F5 */
+ PINCTRL_PIN(90, "gndr"), /* F6 */
+ PINCTRL_PIN(91, "gndr"), /* F7 */
+ PINCTRL_PIN(92, "gndr"), /* F8 */
+ PINCTRL_PIN(93, "vddc"), /* F9 */
+ PINCTRL_PIN(94, "vddc"), /* F10 */
+ PINCTRL_PIN(95, "gndr"), /* F11 */
+ PINCTRL_PIN(96, "EGPIO[7]"), /* F12 */
+ PINCTRL_PIN(97, "EGPIO[5]"), /* F13 */
+ PINCTRL_PIN(98, "ADC GND"), /* F14 */
+ PINCTRL_PIN(99, "EGPIO[6]"), /* F15 */
+ PINCTRL_PIN(100, "sYm"), /* F16 */
+ PINCTRL_PIN(101, "syp"), /* F17 */
+ /* Row G */
+ PINCTRL_PIN(102, "DQMn[0]"), /* G1 */
+ PINCTRL_PIN(103, "CASn"), /* G2 */
+ PINCTRL_PIN(104, "DA[21]"), /* G3 */
+ PINCTRL_PIN(105, "AD[22]"), /* G4 */
+ PINCTRL_PIN(106, "vddr"), /* G5 */
+ PINCTRL_PIN(107, "gndr"), /* G6 */
+ PINCTRL_PIN(108, "gndr"), /* G12 */
+ PINCTRL_PIN(109, "EGPIO[9]"), /* G13 */
+ PINCTRL_PIN(110, "EGPIO[10]"), /* G14 */
+ PINCTRL_PIN(111, "EGPIO[11]"), /* G15 */
+ PINCTRL_PIN(112, "RTCXTALO"), /* G16 */
+ PINCTRL_PIN(113, "RTCXTALI"), /* G17 */
+ /* Row H */
+ PINCTRL_PIN(114, "DA[18]"), /* H1 */
+ PINCTRL_PIN(115, "DA[20]"), /* H2 */
+ PINCTRL_PIN(116, "DA[19]"), /* H3 */
+ PINCTRL_PIN(117, "DA[16]"), /* H4 */
+ PINCTRL_PIN(118, "vddr"), /* H5 */
+ PINCTRL_PIN(119, "vddc"), /* H6 */
+ PINCTRL_PIN(120, "gndc"), /* H7 */
+ PINCTRL_PIN(121, "gndc"), /* H9 */
+ PINCTRL_PIN(122, "gndc"), /* H10 */
+ PINCTRL_PIN(123, "gndr"), /* H12 */
+ PINCTRL_PIN(124, "vddr"), /* H13 */
+ PINCTRL_PIN(125, "EGPIO[8]"), /* H14 */
+ PINCTRL_PIN(126, "PRSTN"), /* H15 */
+ PINCTRL_PIN(127, "COL[7]"), /* H16 */
+ PINCTRL_PIN(128, "RSTON"), /* H17 */
+ /* Row J */
+ PINCTRL_PIN(129, "AD[6]"), /* J1 */
+ PINCTRL_PIN(130, "DA[14]"), /* J2 */
+ PINCTRL_PIN(131, "AD[7]"), /* J3 */
+ PINCTRL_PIN(132, "DA[13]"), /* J4 */
+ PINCTRL_PIN(133, "vddr"), /* J5 */
+ PINCTRL_PIN(134, "vddc"), /* J6 */
+ PINCTRL_PIN(135, "gndc"), /* J8 */
+ PINCTRL_PIN(136, "gndc"), /* J10 */
+ PINCTRL_PIN(137, "vddc"), /* J12 */
+ PINCTRL_PIN(138, "vddr"), /* J13 */
+ PINCTRL_PIN(139, "COL[5]"), /* J14 */
+ PINCTRL_PIN(140, "COL[6]"), /* J15 */
+ PINCTRL_PIN(141, "CSn[0]"), /* J16 */
+ PINCTRL_PIN(142, "COL[3]"), /* J17 */
+ /* Row K */
+ PINCTRL_PIN(143, "AD[4]"), /* K1 */
+ PINCTRL_PIN(144, "DA[12]"), /* K2 */
+ PINCTRL_PIN(145, "DA[10]"), /* K3 */
+ PINCTRL_PIN(146, "DA[11]"), /* K4 */
+ PINCTRL_PIN(147, "vddr"), /* K5 */
+ PINCTRL_PIN(148, "gndr"), /* K6 */
+ PINCTRL_PIN(149, "gndc"), /* K8 */
+ PINCTRL_PIN(150, "gndc"), /* K9 */
+ PINCTRL_PIN(151, "gndc"), /* K10 */
+ PINCTRL_PIN(152, "vddc"), /* K12 */
+ PINCTRL_PIN(153, "COL[4]"), /* K13 */
+ PINCTRL_PIN(154, "PLL_VDD"), /* K14 */
+ PINCTRL_PIN(155, "COL[2]"), /* K15 */
+ PINCTRL_PIN(156, "COL[1]"), /* K16 */
+ PINCTRL_PIN(157, "COL[0]"), /* K17 */
+ /* Row L */
+ PINCTRL_PIN(158, "DA[9]"), /* L1 */
+ PINCTRL_PIN(159, "AD[2]"), /* L2 */
+ PINCTRL_PIN(160, "AD[1]"), /* L3 */
+ PINCTRL_PIN(161, "DA[8]"), /* L4 */
+ PINCTRL_PIN(162, "BLANK"), /* L5 */
+ PINCTRL_PIN(163, "gndr"), /* L6 */
+ PINCTRL_PIN(164, "gndr"), /* L7 */
+ PINCTRL_PIN(165, "ROW[7]"), /* L8 */
+ PINCTRL_PIN(166, "ROW[5]"), /* L9 */
+ PINCTRL_PIN(167, "PLL GND"), /* L10 */
+ PINCTRL_PIN(168, "XTALI"), /* L11 */
+ PINCTRL_PIN(169, "XTALO"), /* L12 */
+ /* Row M */
+ PINCTRL_PIN(170, "BRIGHT"), /* M1 */
+ PINCTRL_PIN(171, "AD[0]"), /* M2 */
+ PINCTRL_PIN(172, "DQMn[1]"), /* M3 */
+ PINCTRL_PIN(173, "DQMn[2]"), /* M4 */
+ PINCTRL_PIN(174, "P[17]"), /* M5 */
+ PINCTRL_PIN(175, "gndr"), /* M6 */
+ PINCTRL_PIN(176, "gndr"), /* M7 */
+ PINCTRL_PIN(177, "vddc"), /* M8 */
+ PINCTRL_PIN(178, "vddc"), /* M9 */
+ PINCTRL_PIN(179, "gndr"), /* M10 */
+ PINCTRL_PIN(180, "gndr"), /* M11 */
+ PINCTRL_PIN(181, "ROW[6]"), /* M12 */
+ PINCTRL_PIN(182, "ROW[4]"), /* M13 */
+ PINCTRL_PIN(183, "ROW[1]"), /* M14 */
+ PINCTRL_PIN(184, "ROW[0]"), /* M15 */
+ PINCTRL_PIN(185, "ROW[3]"), /* M16 */
+ PINCTRL_PIN(186, "ROW[2]"), /* M17 */
+ /* Row N */
+ PINCTRL_PIN(187, "P[14]"), /* N1 */
+ PINCTRL_PIN(188, "P[16]"), /* N2 */
+ PINCTRL_PIN(189, "P[15]"), /* N3 */
+ PINCTRL_PIN(190, "P[13]"), /* N4 */
+ PINCTRL_PIN(191, "P[12]"), /* N5 */
+ PINCTRL_PIN(192, "DA[5]"), /* N6 */
+ PINCTRL_PIN(193, "vddr"), /* N7 */
+ PINCTRL_PIN(194, "vddr"), /* N8 */
+ PINCTRL_PIN(195, "vddr"), /* N9 */
+ PINCTRL_PIN(196, "vddr"), /* N10 */
+ PINCTRL_PIN(197, "EECLK"), /* N11 */
+ PINCTRL_PIN(198, "ASDO"), /* N12 */
+ PINCTRL_PIN(199, "CTSn"), /* N13 */
+ PINCTRL_PIN(200, "RXD[0]"), /* N14 */
+ PINCTRL_PIN(201, "TXD[0]"), /* N15 */
+ PINCTRL_PIN(202, "TXD[1]"), /* N16 */
+ PINCTRL_PIN(203, "TXD[2]"), /* N17 */
+ /* Row P */
+ PINCTRL_PIN(204, "SPCLK"), /* P1 */
+ PINCTRL_PIN(205, "P[10]"), /* P2 */
+ PINCTRL_PIN(206, "P[11]"), /* P3 */
+ PINCTRL_PIN(207, "P[3]"), /* P4 */
+ PINCTRL_PIN(208, "AD[15]"), /* P5 */
+ PINCTRL_PIN(209, "AD[13]"), /* P6 */
+ PINCTRL_PIN(210, "AD[12]"), /* P7 */
+ PINCTRL_PIN(211, "DA[2]"), /* P8 */
+ PINCTRL_PIN(212, "AD[8]"), /* P9 */
+ PINCTRL_PIN(213, "TCK"), /* P10 */
+ PINCTRL_PIN(214, "BOOT[1]"), /* P11 */
+ PINCTRL_PIN(215, "EEDAT"), /* P12 */
+ PINCTRL_PIN(216, "GRLED"), /* P13 */
+ PINCTRL_PIN(217, "RDLED"), /* P14 */
+ PINCTRL_PIN(218, "GGPIO[2]"), /* P15 */
+ PINCTRL_PIN(219, "RXD[1]"), /* P16 */
+ PINCTRL_PIN(220, "RXD[2]"), /* P17 */
+ /* Row R */
+ PINCTRL_PIN(221, "P[9]"), /* R1 */
+ PINCTRL_PIN(222, "HSYNC"), /* R2 */
+ PINCTRL_PIN(223, "P[6]"), /* R3 */
+ PINCTRL_PIN(224, "P[5]"), /* R4 */
+ PINCTRL_PIN(225, "P[0]"), /* R5 */
+ PINCTRL_PIN(226, "AD[14]"), /* R6 */
+ PINCTRL_PIN(227, "DA[4]"), /* R7 */
+ PINCTRL_PIN(228, "DA[1]"), /* R8 */
+ PINCTRL_PIN(229, "DTRn"), /* R9 */
+ PINCTRL_PIN(230, "TDI"), /* R10 */
+ PINCTRL_PIN(231, "BOOT[0]"), /* R11 */
+ PINCTRL_PIN(232, "ASYNC"), /* R12 */
+ PINCTRL_PIN(233, "SSPTX[1]"), /* R13 */
+ PINCTRL_PIN(234, "PWMOUT"), /* R14 */
+ PINCTRL_PIN(235, "USBm[0]"), /* R15 */
+ PINCTRL_PIN(236, "ABITCLK"), /* R16 */
+ PINCTRL_PIN(237, "USBp[0]"), /* R17 */
+ /* Row T */
+ PINCTRL_PIN(238, "NC"), /* T1 */
+ PINCTRL_PIN(239, "NC"), /* T2 */
+ PINCTRL_PIN(240, "V_CSYNC"), /* T3 */
+ PINCTRL_PIN(241, "P[7]"), /* T4 */
+ PINCTRL_PIN(242, "P[2]"), /* T5 */
+ PINCTRL_PIN(243, "DA[7]"), /* T6 */
+ PINCTRL_PIN(244, "AD[11]"), /* T7 */
+ PINCTRL_PIN(245, "AD[9]"), /* T8 */
+ PINCTRL_PIN(246, "DSRn"), /* T9 */
+ PINCTRL_PIN(247, "TMS"), /* T10 */
+ PINCTRL_PIN(248, "gndr"), /* T11 */
+ PINCTRL_PIN(249, "SFRM[1]"), /* T12 */
+ PINCTRL_PIN(250, "INT[2]"), /* T13 */
+ PINCTRL_PIN(251, "INT[0]"), /* T14 */
+ PINCTRL_PIN(252, "USBp[1]"), /* T15 */
+ PINCTRL_PIN(253, "NC"), /* T16 */
+ PINCTRL_PIN(254, "NC"), /* T17 */
+ /* Row U */
+ PINCTRL_PIN(255, "NC"), /* U1 */
+ PINCTRL_PIN(256, "NC"), /* U2 */
+ PINCTRL_PIN(257, "P[8]"), /* U3 */
+ PINCTRL_PIN(258, "P[4]"), /* U4 */
+ PINCTRL_PIN(259, "P[1]"), /* U5 */
+ PINCTRL_PIN(260, "DA[6]"), /* U6 */
+ PINCTRL_PIN(261, "DA[3]"), /* U7 */
+ PINCTRL_PIN(262, "AD[10]"), /* U8 */
+ PINCTRL_PIN(263, "DA[0]"), /* U9 */
+ PINCTRL_PIN(264, "TDO"), /* U10 */
+ PINCTRL_PIN(265, "NC"), /* U11 */
+ PINCTRL_PIN(266, "SCLK[1]"), /* U12 */
+ PINCTRL_PIN(267, "SSPRX[1]"), /* U13 */
+ PINCTRL_PIN(268, "INT[1]"), /* U14 */
+ PINCTRL_PIN(269, "RTSn"), /* U15 */
+ PINCTRL_PIN(270, "USBm[1]"), /* U16 */
+ PINCTRL_PIN(271, "NC"), /* U17 */
+};
+
+static const unsigned int ssp_ep9307_pins[] = {
+ 233, 249, 266, 267,
+};
+
+static const unsigned int ac97_ep9307_pins[] = {
+ 16, 32, 198, 232, 236,
+};
+
+/* I can't find info on those - it's some internal state */
+static const unsigned int raster_on_sdram0_pins[] = {
+};
+
+static const unsigned int raster_on_sdram3_pins[] = {
+};
+
+/* ROW[N] */
+static const unsigned int gpio2a_9307_pins[] = {
+ 165, 166, 181, 182, 183, 184, 185, 186,
+};
+
+/* COL[N] */
+static const unsigned int gpio3a_9307_pins[] = {
+ 127, 139, 140, 142, 153, 155, 156, 157,
+};
+
+static const unsigned int keypad_9307_pins[] = {
+ 127, 139, 140, 142, 153, 155, 156, 157,
+ 165, 166, 181, 182, 183, 184, 185, 186,
+};
+
+/* ep9307 have only 4,5 pin of GPIO E Port exposed */
+static const unsigned int gpio4a_9307_pins[] = { 216, 217 };
+
+/* ep9307 have only 2 pin of GPIO G Port exposed */
+static const unsigned int gpio6a_9307_pins[] = { 219 };
+
+static const unsigned int gpio7a_9307_pins[] = { 7, 24, 41, 56, 57, 59 };
+
+static const struct ep93xx_pin_group ep9307_pin_groups[] = {
+ PMX_GROUP("ssp", ssp_ep9307_pins, EP93XX_SYSCON_DEVCFG_I2SONSSP, 0),
+ PMX_GROUP("i2s_on_ssp", ssp_ep9307_pins, EP93XX_SYSCON_DEVCFG_I2SONSSP,
+ EP93XX_SYSCON_DEVCFG_I2SONSSP),
+ PMX_GROUP("ac97", ac97_ep9307_pins, EP93XX_SYSCON_DEVCFG_I2SONAC97, 0),
+ PMX_GROUP("i2s_on_ac97", ac97_ep9301_pins, EP93XX_SYSCON_DEVCFG_I2SONAC97,
+ EP93XX_SYSCON_DEVCFG_I2SONAC97),
+ PMX_GROUP("rasteronsdram0grp", raster_on_sdram0_pins, EP93XX_SYSCON_DEVCFG_RASONP3, 0),
+ PMX_GROUP("rasteronsdram3grp", raster_on_sdram0_pins, EP93XX_SYSCON_DEVCFG_RASONP3,
+ EP93XX_SYSCON_DEVCFG_RASONP3),
+ PMX_GROUP("gpio2agrp", gpio2a_9307_pins, EP93XX_SYSCON_DEVCFG_GONK,
+ EP93XX_SYSCON_DEVCFG_GONK),
+ PMX_GROUP("gpio3agrp", gpio3a_9307_pins, EP93XX_SYSCON_DEVCFG_GONK,
+ EP93XX_SYSCON_DEVCFG_GONK),
+ PMX_GROUP("keypadgrp", keypad_9307_pins, EP93XX_SYSCON_DEVCFG_GONK, 0),
+ PMX_GROUP("gpio4agrp", gpio4a_9307_pins, EP93XX_SYSCON_DEVCFG_EONIDE,
+ EP93XX_SYSCON_DEVCFG_EONIDE),
+ PMX_GROUP("gpio6agrp", gpio6a_9307_pins, EP93XX_SYSCON_DEVCFG_GONIDE,
+ EP93XX_SYSCON_DEVCFG_GONIDE),
+ PMX_GROUP("gpio7agrp", gpio7a_9307_pins, EP93XX_SYSCON_DEVCFG_HONIDE,
+ EP93XX_SYSCON_DEVCFG_HONIDE),
+};
+
+/* ep9312, ep9315 */
+static const struct pinctrl_pin_desc ep9312_pins[] = {
+ /* Row A */
+ PINCTRL_PIN(0, "CSN[7]"), /* A1 */
+ PINCTRL_PIN(1, "DA[28]"), /* A2 */
+ PINCTRL_PIN(2, "AD[18]"), /* A3 */
+ PINCTRL_PIN(3, "DD[8]"), /* A4 */
+ PINCTRL_PIN(4, "DD[4]"), /* A5 */
+ PINCTRL_PIN(5, "AD[17]"), /* A6 */
+ PINCTRL_PIN(6, "RDN"), /* A7 */
+ PINCTRL_PIN(7, "RXCLK"), /* A8 */
+ PINCTRL_PIN(8, "MIIRXD[0]"), /* A9 */
+ PINCTRL_PIN(9, "RXDVAL"), /* A10 */
+ PINCTRL_PIN(10, "MIITXD[2]"), /* A11 */
+ PINCTRL_PIN(11, "TXERR"), /* A12 */
+ PINCTRL_PIN(12, "CLD"), /* A13 */
+ PINCTRL_PIN(13, "NC"), /* A14 */
+ PINCTRL_PIN(14, "NC"), /* A15 */
+ PINCTRL_PIN(15, "NC"), /* A16 */
+ PINCTRL_PIN(16, "EGPIO[12]"), /* A17 */
+ PINCTRL_PIN(17, "EGPIO[15]"), /* A18 */
+ PINCTRL_PIN(18, "NC"), /* A19 */
+ PINCTRL_PIN(19, "NC"), /* A20 */
+ /* Row B */
+ PINCTRL_PIN(20, "CSN[2]"), /* B1 */
+ PINCTRL_PIN(21, "DA[31]"), /* B2 */
+ PINCTRL_PIN(22, "DA[30]"), /* B3 */
+ PINCTRL_PIN(23, "DA[27]"), /* B4 */
+ PINCTRL_PIN(24, "DD[7]"), /* B5 */
+ PINCTRL_PIN(25, "DD[3]"), /* B6 */
+ PINCTRL_PIN(26, "WRN"), /* B7 */
+ PINCTRL_PIN(27, "MDIO"), /* B8 */
+ PINCTRL_PIN(28, "MIIRXD[1]"), /* B9 */
+ PINCTRL_PIN(29, "RXERR"), /* B10 */
+ PINCTRL_PIN(30, "MIITXD[1]"), /* B11 */
+ PINCTRL_PIN(31, "CRS"), /* B12 */
+ PINCTRL_PIN(32, "NC"), /* B13 */
+ PINCTRL_PIN(33, "NC"), /* B14 */
+ PINCTRL_PIN(34, "NC"), /* B15 */
+ PINCTRL_PIN(35, "NC"), /* B16 */
+ PINCTRL_PIN(36, "EGPIO[13]"), /* B17 */
+ PINCTRL_PIN(37, "NC"), /* B18 */
+ PINCTRL_PIN(38, "WAITN"), /* B19 */
+ PINCTRL_PIN(39, "TRSTN"), /* B20 */
+ /* Row C */
+ PINCTRL_PIN(40, "CSN[1]"), /* C1 */
+ PINCTRL_PIN(41, "CSN[3]"), /* C2 */
+ PINCTRL_PIN(42, "AD[20]"), /* C3 */
+ PINCTRL_PIN(43, "DA[29]"), /* C4 */
+ PINCTRL_PIN(44, "DD[10]"), /* C5 */
+ PINCTRL_PIN(45, "DD[6]"), /* C6 */
+ PINCTRL_PIN(46, "DD[2]"), /* C7 */
+ PINCTRL_PIN(47, "MDC"), /* C8 */
+ PINCTRL_PIN(48, "MIIRXD[3]"), /* C9 */
+ PINCTRL_PIN(49, "TXCLK"), /* C10 */
+ PINCTRL_PIN(50, "MIITXD[0]"), /* C11 */
+ PINCTRL_PIN(51, "NC"), /* C12 */
+ PINCTRL_PIN(52, "NC"), /* C13 */
+ PINCTRL_PIN(53, "NC"), /* C14 */
+ PINCTRL_PIN(54, "NC"), /* C15 */
+ PINCTRL_PIN(55, "NC"), /* C16 */
+ PINCTRL_PIN(56, "NC"), /* C17 */
+ PINCTRL_PIN(57, "USBP[2]"), /* C18 */
+ PINCTRL_PIN(58, "IORDY"), /* C19 */
+ PINCTRL_PIN(59, "DMACKN"), /* C20 */
+ /* Row D */
+ PINCTRL_PIN(60, "AD[24]"), /* D1 */
+ PINCTRL_PIN(61, "DA[25]"), /* D2 */
+ PINCTRL_PIN(62, "DD[11]"), /* D3 */
+ PINCTRL_PIN(63, "SDCLKEN"), /* D4 */
+ PINCTRL_PIN(64, "AD[19]"), /* D5 */
+ PINCTRL_PIN(65, "DD[9]"), /* D6 */
+ PINCTRL_PIN(66, "DD[5]"), /* D7 */
+ PINCTRL_PIN(67, "AD[16]"), /* D8 */
+ PINCTRL_PIN(68, "MIIRXD[2]"), /* D9 */
+ PINCTRL_PIN(69, "MIITXD[3]"), /* D10 */
+ PINCTRL_PIN(70, "TXEN"), /* D11 */
+ PINCTRL_PIN(71, "NC"), /* D12 */
+ PINCTRL_PIN(72, "NC"), /* D13 */
+ PINCTRL_PIN(73, "NC"), /* D14 */
+ PINCTRL_PIN(74, "EGPIO[14]"), /* D15 */
+ PINCTRL_PIN(75, "NC"), /* D16 */
+ PINCTRL_PIN(76, "USBM[2]"), /* D17 */
+ PINCTRL_PIN(77, "ARSTN"), /* D18 */
+ PINCTRL_PIN(78, "DIORN"), /* D19 */
+ PINCTRL_PIN(79, "EGPIO[1]"), /* D20 */
+ /* Row E */
+ PINCTRL_PIN(80, "AD[23]"), /* E1 */
+ PINCTRL_PIN(81, "DA[23]"), /* E2 */
+ PINCTRL_PIN(82, "DA[26]"), /* E3 */
+ PINCTRL_PIN(83, "CSN[6]"), /* E4 */
+ PINCTRL_PIN(84, "GND"), /* E5 */
+ PINCTRL_PIN(85, "GND"), /* E6 */
+ PINCTRL_PIN(86, "CVDD"), /* E7 */
+ PINCTRL_PIN(87, "CVDD"), /* E8 */
+ PINCTRL_PIN(88, "RVDD"), /* E9 */
+ PINCTRL_PIN(89, "GND"), /* E10 */
+ PINCTRL_PIN(90, "GND"), /* E11 */
+ PINCTRL_PIN(91, "RVDD"), /* E12 */
+ PINCTRL_PIN(92, "CVDD"), /* E13 */
+ PINCTRL_PIN(93, "CVDD"), /* E14 */
+ PINCTRL_PIN(94, "GND"), /* E15 */
+ PINCTRL_PIN(95, "ASDI"), /* E16 */
+ PINCTRL_PIN(96, "DIOWN"), /* E17 */
+ PINCTRL_PIN(97, "EGPIO[0]"), /* E18 */
+ PINCTRL_PIN(98, "EGPIO[3]"), /* E19 */
+ PINCTRL_PIN(99, "EGPIO[5]"), /* E20 */
+ /* Row F */
+ PINCTRL_PIN(100, "SDCSN[3]"), /* F1 */
+ PINCTRL_PIN(101, "DA[22]"), /* F2 */
+ PINCTRL_PIN(102, "DA[24]"), /* F3 */
+ PINCTRL_PIN(103, "AD[25]"), /* F4 */
+ PINCTRL_PIN(104, "RVDD"), /* F5 */
+ PINCTRL_PIN(105, "GND"), /* F6 */
+ PINCTRL_PIN(106, "CVDD"), /* F7 */
+ PINCTRL_PIN(107, "CVDD"), /* F14 */
+ PINCTRL_PIN(108, "GND"), /* F15 */
+ PINCTRL_PIN(109, "GND"), /* F16 */
+ PINCTRL_PIN(110, "EGPIO[2]"), /* F17 */
+ PINCTRL_PIN(111, "EGPIO[4]"), /* F18 */
+ PINCTRL_PIN(112, "EGPIO[6]"), /* F19 */
+ PINCTRL_PIN(113, "EGPIO[8]"), /* F20 */
+ /* Row G */
+ PINCTRL_PIN(114, "SDCSN[0]"), /* G1 */
+ PINCTRL_PIN(115, "SDCSN[1]"), /* G2 */
+ PINCTRL_PIN(116, "SDWEN"), /* G3 */
+ PINCTRL_PIN(117, "SDCLK"), /* G4 */
+ PINCTRL_PIN(118, "RVDD"), /* G5 */
+ PINCTRL_PIN(119, "RVDD"), /* G6 */
+ PINCTRL_PIN(120, "RVDD"), /* G15 */
+ PINCTRL_PIN(121, "RVDD"), /* G16 */
+ PINCTRL_PIN(122, "EGPIO[7]"), /* G17 */
+ PINCTRL_PIN(123, "EGPIO[9]"), /* G18 */
+ PINCTRL_PIN(124, "EGPIO[10]"), /* G19 */
+ PINCTRL_PIN(125, "EGPIO[11]"), /* G20 */
+ /* Row H */
+ PINCTRL_PIN(126, "DQMN[3]"), /* H1 */
+ PINCTRL_PIN(127, "CASN"), /* H2 */
+ PINCTRL_PIN(128, "RASN"), /* H3 */
+ PINCTRL_PIN(129, "SDCSN[2]"), /* H4 */
+ PINCTRL_PIN(130, "CVDD"), /* H5 */
+ PINCTRL_PIN(131, "GND"), /* H8 */
+ PINCTRL_PIN(132, "GND"), /* H9 */
+ PINCTRL_PIN(133, "GND"), /* H10 */
+ PINCTRL_PIN(134, "GND"), /* H11 */
+ PINCTRL_PIN(135, "GND"), /* H12 */
+ PINCTRL_PIN(136, "GND"), /* H13 */
+ PINCTRL_PIN(137, "RVDD"), /* H16 */
+ PINCTRL_PIN(138, "RTCXTALO"), /* H17 */
+ PINCTRL_PIN(139, "ADC_VDD"), /* H18 */
+ PINCTRL_PIN(140, "ADC_GND"), /* H19 */
+ PINCTRL_PIN(141, "XP"), /* H20 */
+ /* Row J */
+ PINCTRL_PIN(142, "DA[21]"), /* J1 */
+ PINCTRL_PIN(143, "DQMN[0]"), /* J2 */
+ PINCTRL_PIN(144, "DQMN[1]"), /* J3 */
+ PINCTRL_PIN(145, "DQMN[2]"), /* J4 */
+ PINCTRL_PIN(146, "GND"), /* J5 */
+ PINCTRL_PIN(147, "GND"), /* J8 */
+ PINCTRL_PIN(148, "GND"), /* J9 */
+ PINCTRL_PIN(149, "GND"), /* J10 */
+ PINCTRL_PIN(150, "GND"), /* J11 */
+ PINCTRL_PIN(151, "GND"), /* J12 */
+ PINCTRL_PIN(152, "GND"), /* J13 */
+ PINCTRL_PIN(153, "CVDD"), /* J16 */
+ PINCTRL_PIN(154, "RTCXTALI"), /* J17 */
+ PINCTRL_PIN(155, "XM"), /* J18 */
+ PINCTRL_PIN(156, "YP"), /* J19 */
+ PINCTRL_PIN(157, "YM"), /* J20 */
+ /* Row K */
+ PINCTRL_PIN(158, "AD[22]"), /* K1 */
+ PINCTRL_PIN(159, "DA[20]"), /* K2 */
+ PINCTRL_PIN(160, "AD[21]"), /* K3 */
+ PINCTRL_PIN(161, "DA[19]"), /* K4 */
+ PINCTRL_PIN(162, "RVDD"), /* K5 */
+ PINCTRL_PIN(163, "GND"), /* K8 */
+ PINCTRL_PIN(164, "GND"), /* K9 */
+ PINCTRL_PIN(165, "GND"), /* K10 */
+ PINCTRL_PIN(166, "GND"), /* K11 */
+ PINCTRL_PIN(167, "GND"), /* K12 */
+ PINCTRL_PIN(168, "GND"), /* K13 */
+ PINCTRL_PIN(169, "CVDD"), /* K16 */
+ PINCTRL_PIN(170, "SYM"), /* K17 */
+ PINCTRL_PIN(171, "SYP"), /* K18 */
+ PINCTRL_PIN(172, "SXM"), /* K19 */
+ PINCTRL_PIN(173, "SXP"), /* K20 */
+ /* Row L */
+ PINCTRL_PIN(174, "DA[18]"), /* L1 */
+ PINCTRL_PIN(175, "DA[17]"), /* L2 */
+ PINCTRL_PIN(176, "DA[16]"), /* L3 */
+ PINCTRL_PIN(177, "DA[15]"), /* L4 */
+ PINCTRL_PIN(178, "GND"), /* L5 */
+ PINCTRL_PIN(179, "GND"), /* L8 */
+ PINCTRL_PIN(180, "GND"), /* L9 */
+ PINCTRL_PIN(181, "GND"), /* L10 */
+ PINCTRL_PIN(182, "GND"), /* L11 */
+ PINCTRL_PIN(183, "GND"), /* L12 */
+ PINCTRL_PIN(184, "GND"), /* L13 */
+ PINCTRL_PIN(185, "CVDD"), /* L16 */
+ PINCTRL_PIN(186, "COL[5]"), /* L17 */
+ PINCTRL_PIN(187, "COL[7]"), /* L18 */
+ PINCTRL_PIN(188, "RSTON"), /* L19 */
+ PINCTRL_PIN(189, "PRSTN"), /* L20 */
+ /* Row M */
+ PINCTRL_PIN(190, "AD[7]"), /* M1 */
+ PINCTRL_PIN(191, "DA[14]"), /* M2 */
+ PINCTRL_PIN(192, "AD[6]"), /* M3 */
+ PINCTRL_PIN(193, "AD[5]"), /* M4 */
+ PINCTRL_PIN(194, "CVDD"), /* M5 */
+ PINCTRL_PIN(195, "GND"), /* M8 */
+ PINCTRL_PIN(196, "GND"), /* M9 */
+ PINCTRL_PIN(197, "GND"), /* M10 */
+ PINCTRL_PIN(198, "GND"), /* M11 */
+ PINCTRL_PIN(199, "GND"), /* M12 */
+ PINCTRL_PIN(200, "GND"), /* M13 */
+ PINCTRL_PIN(201, "GND"), /* M16 */
+ PINCTRL_PIN(202, "COL[4]"), /* M17 */
+ PINCTRL_PIN(203, "COL[3]"), /* M18 */
+ PINCTRL_PIN(204, "COL[6]"), /* M19 */
+ PINCTRL_PIN(205, "CSN[0]"), /* M20 */
+ /* Row N */
+ PINCTRL_PIN(206, "DA[13]"), /* N1 */
+ PINCTRL_PIN(207, "DA[12]"), /* N2 */
+ PINCTRL_PIN(208, "DA[11]"), /* N3 */
+ PINCTRL_PIN(209, "AD[3]"), /* N4 */
+ PINCTRL_PIN(210, "CVDD"), /* N5 */
+ PINCTRL_PIN(211, "CVDD"), /* N6 */
+ PINCTRL_PIN(212, "GND"), /* N8 */
+ PINCTRL_PIN(213, "GND"), /* N9 */
+ PINCTRL_PIN(214, "GND"), /* N10 */
+ PINCTRL_PIN(215, "GND"), /* N11 */
+ PINCTRL_PIN(216, "GND"), /* N12 */
+ PINCTRL_PIN(217, "GND"), /* N13 */
+ PINCTRL_PIN(218, "GND"), /* N15 */
+ PINCTRL_PIN(219, "GND"), /* N16 */
+ PINCTRL_PIN(220, "XTALO"), /* N17 */
+ PINCTRL_PIN(221, "COL[0]"), /* N18 */
+ PINCTRL_PIN(222, "COL[1]"), /* N19 */
+ PINCTRL_PIN(223, "COL[2]"), /* N20 */
+ /* Row P */
+ PINCTRL_PIN(224, "AD[4]"), /* P1 */
+ PINCTRL_PIN(225, "DA[10]"), /* P2 */
+ PINCTRL_PIN(226, "DA[9]"), /* P3 */
+ PINCTRL_PIN(227, "BRIGHT"), /* P4 */
+ PINCTRL_PIN(228, "RVDD"), /* P5 */
+ PINCTRL_PIN(229, "RVDD"), /* P6 */
+ PINCTRL_PIN(230, "RVDD"), /* P15 */
+ PINCTRL_PIN(231, "RVDD"), /* P16 */
+ PINCTRL_PIN(232, "XTALI"), /* P17 */
+ PINCTRL_PIN(233, "PLL_VDD"), /* P18 */
+ PINCTRL_PIN(234, "ROW[6]"), /* P19 */
+ PINCTRL_PIN(235, "ROW[7]"), /* P20 */
+ /* Row R */
+ PINCTRL_PIN(236, "AD[2]"), /* R1 */
+ PINCTRL_PIN(237, "AD[1]"), /* R2 */
+ PINCTRL_PIN(238, "P[17]"), /* R3 */
+ PINCTRL_PIN(239, "P[14]"), /* R4 */
+ PINCTRL_PIN(240, "RVDD"), /* R5 */
+ PINCTRL_PIN(241, "RVDD"), /* R6 */
+ PINCTRL_PIN(242, "GND"), /* R7 */
+ PINCTRL_PIN(243, "CVDD"), /* R8 */
+ PINCTRL_PIN(244, "CVDD"), /* R13 */
+ PINCTRL_PIN(245, "GND"), /* R14 */
+ PINCTRL_PIN(246, "RVDD"), /* R15 */
+ PINCTRL_PIN(247, "RVDD"), /* R16 */
+ PINCTRL_PIN(248, "ROW[0]"), /* R17 */
+ PINCTRL_PIN(249, "ROW[3]"), /* R18 */
+ PINCTRL_PIN(250, "PLL_GND"), /* R19 */
+ PINCTRL_PIN(251, "ROW[5]"), /* R20 */
+ /* Row T */
+ PINCTRL_PIN(252, "DA[8]"), /* T1 */
+ PINCTRL_PIN(253, "BLANK"), /* T2 */
+ PINCTRL_PIN(254, "P[13]"), /* T3 */
+ PINCTRL_PIN(255, "SPCLK"), /* T4 */
+ PINCTRL_PIN(256, "V_CSYNC"), /* T5 */
+ PINCTRL_PIN(257, "DD[14]"), /* T6 */
+ PINCTRL_PIN(258, "GND"), /* T7 */
+ PINCTRL_PIN(259, "CVDD"), /* T8 */
+ PINCTRL_PIN(260, "RVDD"), /* T9 */
+ PINCTRL_PIN(261, "GND"), /* T10 */
+ PINCTRL_PIN(262, "GND"), /* T11 */
+ PINCTRL_PIN(263, "RVDD"), /* T12 */
+ PINCTRL_PIN(264, "CVDD"), /* T13 */
+ PINCTRL_PIN(265, "GND"), /* T14 */
+ PINCTRL_PIN(266, "INT[0]"), /* T15 */
+ PINCTRL_PIN(267, "USBM[1]"), /* T16 */
+ PINCTRL_PIN(268, "RXD[0]"), /* T17 */
+ PINCTRL_PIN(269, "TXD[2]"), /* T18 */
+ PINCTRL_PIN(270, "ROW[2]"), /* T19 */
+ PINCTRL_PIN(271, "ROW[4]"), /* T20 */
+ /* Row U */
+ PINCTRL_PIN(272, "AD[0]"), /* U1 */
+ PINCTRL_PIN(273, "P[15]"), /* U2 */
+ PINCTRL_PIN(274, "P[10]"), /* U3 */
+ PINCTRL_PIN(275, "P[7]"), /* U4 */
+ PINCTRL_PIN(276, "P[6]"), /* U5 */
+ PINCTRL_PIN(277, "P[4]"), /* U6 */
+ PINCTRL_PIN(278, "P[0]"), /* U7 */
+ PINCTRL_PIN(279, "AD[13]"), /* U8 */
+ PINCTRL_PIN(280, "DA[3]"), /* U9 */
+ PINCTRL_PIN(281, "DA[0]"), /* U10 */
+ PINCTRL_PIN(282, "DSRN"), /* U11 */
+ PINCTRL_PIN(283, "BOOT[1]"), /* U12 */
+ PINCTRL_PIN(284, "NC"), /* U13 */
+ PINCTRL_PIN(285, "SSPRX1"), /* U14 */
+ PINCTRL_PIN(286, "INT[1]"), /* U15 */
+ PINCTRL_PIN(287, "PWMOUT"), /* U16 */
+ PINCTRL_PIN(288, "USBM[0]"), /* U17 */
+ PINCTRL_PIN(289, "RXD[1]"), /* U18 */
+ PINCTRL_PIN(290, "TXD[1]"), /* U19 */
+ PINCTRL_PIN(291, "ROW[1]"), /* U20 */
+ /* Row V */
+ PINCTRL_PIN(292, "P[16]"), /* V1 */
+ PINCTRL_PIN(293, "P[11]"), /* V2 */
+ PINCTRL_PIN(294, "P[8]"), /* V3 */
+ PINCTRL_PIN(295, "DD[15]"), /* V4 */
+ PINCTRL_PIN(296, "DD[13]"), /* V5 */
+ PINCTRL_PIN(297, "P[1]"), /* V6 */
+ PINCTRL_PIN(298, "AD[14]"), /* V7 */
+ PINCTRL_PIN(299, "AD[12]"), /* V8 */
+ PINCTRL_PIN(300, "DA[2]"), /* V9 */
+ PINCTRL_PIN(301, "IDECS0N"), /* V10 */
+ PINCTRL_PIN(302, "IDEDA[2]"), /* V11 */
+ PINCTRL_PIN(303, "TDI"), /* V12 */
+ PINCTRL_PIN(304, "GND"), /* V13 */
+ PINCTRL_PIN(305, "ASYNC"), /* V14 */
+ PINCTRL_PIN(306, "SSPTX1"), /* V15 */
+ PINCTRL_PIN(307, "INT[2]"), /* V16 */
+ PINCTRL_PIN(308, "RTSN"), /* V17 */
+ PINCTRL_PIN(309, "USBP[0]"), /* V18 */
+ PINCTRL_PIN(310, "CTSN"), /* V19 */
+ PINCTRL_PIN(311, "TXD[0]"), /* V20 */
+ /* Row W */
+ PINCTRL_PIN(312, "P[12]"), /* W1 */
+ PINCTRL_PIN(313, "P[9]"), /* W2 */
+ PINCTRL_PIN(314, "DD[0]"), /* W3 */
+ PINCTRL_PIN(315, "P[5]"), /* W4 */
+ PINCTRL_PIN(316, "P[3]"), /* W5 */
+ PINCTRL_PIN(317, "DA[7]"), /* W6 */
+ PINCTRL_PIN(318, "DA[5]"), /* W7 */
+ PINCTRL_PIN(319, "AD[11]"), /* W8 */
+ PINCTRL_PIN(320, "AD[9]"), /* W9 */
+ PINCTRL_PIN(321, "IDECS1N"), /* W10 */
+ PINCTRL_PIN(322, "IDEDA[1]"), /* W11 */
+ PINCTRL_PIN(323, "TCK"), /* W12 */
+ PINCTRL_PIN(324, "TMS"), /* W13 */
+ PINCTRL_PIN(325, "EECLK"), /* W14 */
+ PINCTRL_PIN(326, "SCLK1"), /* W15 */
+ PINCTRL_PIN(327, "GRLED"), /* W16 */
+ PINCTRL_PIN(328, "INT[3]"), /* W17 */
+ PINCTRL_PIN(329, "SLA[1]"), /* W18 */
+ PINCTRL_PIN(330, "SLA[0]"), /* W19 */
+ PINCTRL_PIN(331, "RXD[2]"), /* W20 */
+ /* Row Y */
+ PINCTRL_PIN(332, "HSYNC"), /* Y1 */
+ PINCTRL_PIN(333, "DD[1]"), /* Y2 */
+ PINCTRL_PIN(334, "DD[12]"), /* Y3 */
+ PINCTRL_PIN(335, "P[2]"), /* Y4 */
+ PINCTRL_PIN(336, "AD[15]"), /* Y5 */
+ PINCTRL_PIN(337, "DA[6]"), /* Y6 */
+ PINCTRL_PIN(338, "DA[4]"), /* Y7 */
+ PINCTRL_PIN(339, "AD[10]"), /* Y8 */
+ PINCTRL_PIN(340, "DA[1]"), /* Y9 */
+ PINCTRL_PIN(341, "AD[8]"), /* Y10 */
+ PINCTRL_PIN(342, "IDEDA[0]"), /* Y11 */
+ PINCTRL_PIN(343, "DTRN"), /* Y12 */
+ PINCTRL_PIN(344, "TDO"), /* Y13 */
+ PINCTRL_PIN(345, "BOOT[0]"), /* Y14 */
+ PINCTRL_PIN(346, "EEDAT"), /* Y15 */
+ PINCTRL_PIN(347, "ASDO"), /* Y16 */
+ PINCTRL_PIN(348, "SFRM1"), /* Y17 */
+ PINCTRL_PIN(349, "RDLED"), /* Y18 */
+ PINCTRL_PIN(350, "USBP[1]"), /* Y19 */
+ PINCTRL_PIN(351, "ABITCLK"), /* Y20 */
+};
+
+static const unsigned int ssp_ep9312_pins[] = {
+ 285, 306, 326, 348,
+};
+
+static const unsigned int ac97_ep9312_pins[] = {
+ 77, 95, 305, 347, 351,
+};
+
+static const unsigned int pwm_ep9312_pins[] = { 74 };
+
+static const unsigned int gpio1a_ep9312_pins[] = { 74 };
+
+static const unsigned int gpio2a_9312_pins[] = {
+ 234, 235, 248, 249, 251, 270, 271, 291,
+};
+
+static const unsigned int gpio3a_9312_pins[] = {
+ 186, 187, 202, 203, 204, 221, 222, 223,
+};
+
+static const unsigned int keypad_9312_pins[] = {
+ 186, 187, 202, 203, 204, 221, 222, 223,
+ 234, 235, 248, 249, 251, 270, 271, 291,
+};
+
+static const unsigned int gpio4a_9312_pins[] = {
+ 78, 301, 302, 321, 322, 342,
+};
+
+static const unsigned int gpio6a_9312_pins[] = {
+ 257, 295, 296, 334,
+};
+
+static const unsigned int gpio7a_9312_pins[] = {
+ 4, 24, 25, 45, 46, 66, 314, 333,
+};
+
+static const unsigned int ide_9312_pins[] = {
+ 78, 301, 302, 321, 322, 342,
+ 257, 295, 296, 334,
+ 4, 24, 25, 45, 46, 66, 314, 333,
+};
+
+static const struct ep93xx_pin_group ep9312_pin_groups[] = {
+ PMX_GROUP("ssp", ssp_ep9312_pins, EP93XX_SYSCON_DEVCFG_I2SONSSP, 0),
+ PMX_GROUP("i2s_on_ssp", ssp_ep9312_pins, EP93XX_SYSCON_DEVCFG_I2SONSSP,
+ EP93XX_SYSCON_DEVCFG_I2SONSSP),
+ PMX_GROUP("pwm1", pwm_ep9312_pins, EP93XX_SYSCON_DEVCFG_PONG,
+ EP93XX_SYSCON_DEVCFG_PONG),
+ PMX_GROUP("gpio1agrp", gpio1a_ep9312_pins, EP93XX_SYSCON_DEVCFG_PONG, 0),
+ PMX_GROUP("ac97", ac97_ep9312_pins, EP93XX_SYSCON_DEVCFG_I2SONAC97, 0),
+ PMX_GROUP("i2s_on_ac97", ac97_ep9312_pins, EP93XX_SYSCON_DEVCFG_I2SONAC97,
+ EP93XX_SYSCON_DEVCFG_I2SONAC97),
+ PMX_GROUP("rasteronsdram0grp", raster_on_sdram0_pins, EP93XX_SYSCON_DEVCFG_RASONP3, 0),
+ PMX_GROUP("rasteronsdram3grp", raster_on_sdram0_pins, EP93XX_SYSCON_DEVCFG_RASONP3,
+ EP93XX_SYSCON_DEVCFG_RASONP3),
+ PMX_GROUP("gpio2agrp", gpio2a_9312_pins, EP93XX_SYSCON_DEVCFG_GONK,
+ EP93XX_SYSCON_DEVCFG_GONK),
+ PMX_GROUP("gpio3agrp", gpio3a_9312_pins, EP93XX_SYSCON_DEVCFG_GONK,
+ EP93XX_SYSCON_DEVCFG_GONK),
+ PMX_GROUP("keypadgrp", keypad_9312_pins, EP93XX_SYSCON_DEVCFG_GONK, 0),
+ PMX_GROUP("gpio4agrp", gpio4a_9312_pins, EP93XX_SYSCON_DEVCFG_EONIDE,
+ EP93XX_SYSCON_DEVCFG_EONIDE),
+ PMX_GROUP("gpio6agrp", gpio6a_9312_pins, EP93XX_SYSCON_DEVCFG_GONIDE,
+ EP93XX_SYSCON_DEVCFG_GONIDE),
+ PMX_GROUP("gpio7agrp", gpio7a_9312_pins, EP93XX_SYSCON_DEVCFG_HONIDE,
+ EP93XX_SYSCON_DEVCFG_HONIDE),
+ PMX_GROUP("idegrp", ide_9312_pins, EP93XX_SYSCON_DEVCFG_EONIDE |
+ EP93XX_SYSCON_DEVCFG_GONIDE | EP93XX_SYSCON_DEVCFG_HONIDE, 0),
+};
+
+static int ep93xx_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct ep93xx_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ switch (pmx->model) {
+ case EP93XX_9301_PINCTRL:
+ return ARRAY_SIZE(ep9301_pin_groups);
+ case EP93XX_9307_PINCTRL:
+ return ARRAY_SIZE(ep9307_pin_groups);
+ case EP93XX_9312_PINCTRL:
+ return ARRAY_SIZE(ep9312_pin_groups);
+ default:
+ return 0;
+ }
+}
+
+static const char *ep93xx_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ struct ep93xx_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ switch (pmx->model) {
+ case EP93XX_9301_PINCTRL:
+ return ep9301_pin_groups[selector].grp.name;
+ case EP93XX_9307_PINCTRL:
+ return ep9307_pin_groups[selector].grp.name;
+ case EP93XX_9312_PINCTRL:
+ return ep9312_pin_groups[selector].grp.name;
+ default:
+ return NULL;
+ }
+}
+
+static int ep93xx_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ const unsigned int **pins,
+ unsigned int *num_pins)
+{
+ struct ep93xx_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ switch (pmx->model) {
+ case EP93XX_9301_PINCTRL:
+ *pins = ep9301_pin_groups[selector].grp.pins;
+ *num_pins = ep9301_pin_groups[selector].grp.npins;
+ break;
+ case EP93XX_9307_PINCTRL:
+ *pins = ep9307_pin_groups[selector].grp.pins;
+ *num_pins = ep9307_pin_groups[selector].grp.npins;
+ break;
+ case EP93XX_9312_PINCTRL:
+ *pins = ep9312_pin_groups[selector].grp.pins;
+ *num_pins = ep9312_pin_groups[selector].grp.npins;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct pinctrl_ops ep93xx_pctrl_ops = {
+ .get_groups_count = ep93xx_get_groups_count,
+ .get_group_name = ep93xx_get_group_name,
+ .get_group_pins = ep93xx_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+ .dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static const char * const spigrps[] = { "ssp" };
+static const char * const ac97grps[] = { "ac97" };
+static const char * const i2sgrps[] = { "i2s_on_ssp", "i2s_on_ac97" };
+static const char * const pwm1grps[] = { "pwm1" };
+static const char * const gpiogrps[] = { "gpio1agrp", "gpio2agrp", "gpio3agrp",
+ "gpio4agrp", "gpio6agrp", "gpio7agrp" };
+static const char * const rastergrps[] = { "rasteronsdram0grp", "rasteronsdram3grp"};
+static const char * const keypadgrps[] = { "keypadgrp"};
+static const char * const idegrps[] = { "idegrp"};
+
+static const struct pinfunction ep93xx_pmx_functions[] = {
+ PINCTRL_PINFUNCTION("spi", spigrps, ARRAY_SIZE(spigrps)),
+ PINCTRL_PINFUNCTION("ac97", ac97grps, ARRAY_SIZE(ac97grps)),
+ PINCTRL_PINFUNCTION("i2s", i2sgrps, ARRAY_SIZE(i2sgrps)),
+ PINCTRL_PINFUNCTION("pwm", pwm1grps, ARRAY_SIZE(pwm1grps)),
+ PINCTRL_PINFUNCTION("keypad", keypadgrps, ARRAY_SIZE(keypadgrps)),
+ PINCTRL_PINFUNCTION("pata", idegrps, ARRAY_SIZE(idegrps)),
+ PINCTRL_PINFUNCTION("lcd", rastergrps, ARRAY_SIZE(rastergrps)),
+ PINCTRL_PINFUNCTION("gpio", gpiogrps, ARRAY_SIZE(gpiogrps)),
+};
+
+static int ep93xx_pmx_set_mux(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ unsigned int group)
+{
+ struct ep93xx_pmx *pmx;
+ const struct pinfunction *func;
+ const struct ep93xx_pin_group *grp;
+ u32 before, after, expected;
+ unsigned long tmp;
+ int i;
+
+ pmx = pinctrl_dev_get_drvdata(pctldev);
+
+ func = &ep93xx_pmx_functions[selector];
+
+ switch (pmx->model) {
+ case EP93XX_9301_PINCTRL:
+ grp = &ep9301_pin_groups[group];
+ break;
+ case EP93XX_9307_PINCTRL:
+ grp = &ep9307_pin_groups[group];
+ break;
+ case EP93XX_9312_PINCTRL:
+ grp = &ep9312_pin_groups[group];
+ break;
+ }
+
+ dev_dbg(pmx->dev,
+ "ACTIVATE function \"%s\" with group \"%s\" (mask=0x%x, value=0x%x)\n",
+ func->name, grp->grp.name, grp->mask, grp->value);
+
+ regmap_read(pmx->map, EP93XX_SYSCON_DEVCFG, &before);
+ ep93xx_pinctrl_update_bits(pmx, EP93XX_SYSCON_DEVCFG,
+ grp->mask, grp->value);
+ regmap_read(pmx->map, EP93XX_SYSCON_DEVCFG, &after);
+
+ dev_dbg(pmx->dev, "before=0x%x, after=0x%x, mask=0x%lx\n",
+ before, after, PADS_MASK);
+
+ /* Which bits changed */
+ before &= PADS_MASK;
+ after &= PADS_MASK;
+ expected = before & ~grp->mask;
+ expected |= grp->value;
+ expected &= PADS_MASK;
+
+ /* Print changed states */
+ tmp = expected ^ after;
+ for_each_set_bit(i, &tmp, PADS_MAXBIT) {
+ bool enabled = expected & BIT(i);
+
+ dev_err(pmx->dev,
+ "pin group %s could not be %s: probably a hardware limitation\n",
+ ep93xx_padgroups[i], str_enabled_disabled(enabled));
+ dev_err(pmx->dev,
+ "DeviceCfg before: %08x, after %08x, expected %08x\n",
+ before, after, expected);
+ }
+
+ return tmp ? -EINVAL : 0;
+};
+
+static int ep93xx_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+ return ARRAY_SIZE(ep93xx_pmx_functions);
+}
+
+static const char *ep93xx_pmx_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ return ep93xx_pmx_functions[selector].name;
+}
+
+static int ep93xx_pmx_get_groups(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ const char * const **groups,
+ unsigned int * const num_groups)
+{
+ *groups = ep93xx_pmx_functions[selector].groups;
+ *num_groups = ep93xx_pmx_functions[selector].ngroups;
+ return 0;
+}
+
+static const struct pinmux_ops ep93xx_pmx_ops = {
+ .get_functions_count = ep93xx_pmx_get_funcs_count,
+ .get_function_name = ep93xx_pmx_get_func_name,
+ .get_function_groups = ep93xx_pmx_get_groups,
+ .set_mux = ep93xx_pmx_set_mux,
+};
+
+static struct pinctrl_desc ep93xx_pmx_desc = {
+ .name = DRIVER_NAME,
+ .pctlops = &ep93xx_pctrl_ops,
+ .pmxops = &ep93xx_pmx_ops,
+ .owner = THIS_MODULE,
+};
+
+static int ep93xx_pmx_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct ep93xx_regmap_adev *rdev = to_ep93xx_regmap_adev(adev);
+ struct device *dev = &adev->dev;
+ struct ep93xx_pmx *pmx;
+
+ /* Create state holders etc for this driver */
+ pmx = devm_kzalloc(dev, sizeof(*pmx), GFP_KERNEL);
+ if (!pmx)
+ return -ENOMEM;
+
+ pmx->dev = dev;
+ pmx->map = rdev->map;
+ pmx->aux_dev = rdev;
+ pmx->model = (int)(uintptr_t)id->driver_data;
+ switch (pmx->model) {
+ case EP93XX_9301_PINCTRL:
+ ep93xx_pmx_desc.pins = ep9301_pins;
+ ep93xx_pmx_desc.npins = ARRAY_SIZE(ep9301_pins);
+ dev_info(dev, "detected 9301/9302 chip variant\n");
+ break;
+ case EP93XX_9307_PINCTRL:
+ ep93xx_pmx_desc.pins = ep9307_pins;
+ ep93xx_pmx_desc.npins = ARRAY_SIZE(ep9307_pins);
+ dev_info(dev, "detected 9307 chip variant\n");
+ break;
+ case EP93XX_9312_PINCTRL:
+ ep93xx_pmx_desc.pins = ep9312_pins;
+ ep93xx_pmx_desc.npins = ARRAY_SIZE(ep9312_pins);
+ dev_info(dev, "detected 9312/9315 chip variant\n");
+ break;
+ default:
+ return dev_err_probe(dev, -EINVAL, "unknown pin control model: %u\n", pmx->model);
+ }
+
+ /* using parent of_node to match in get_pinctrl_dev_from_of_node() */
+ device_set_of_node_from_dev(dev, adev->dev.parent);
+ pmx->pctl = devm_pinctrl_register(dev, &ep93xx_pmx_desc, pmx);
+ if (IS_ERR(pmx->pctl))
+ return dev_err_probe(dev, PTR_ERR(pmx->pctl), "could not register pinmux driver\n");
+
+ return 0;
+};
+
+static const struct auxiliary_device_id ep93xx_pinctrl_ids[] = {
+ {
+ .name = "soc_ep93xx.pinctrl-ep9301",
+ .driver_data = (kernel_ulong_t)EP93XX_9301_PINCTRL,
+ },
+ {
+ .name = "soc_ep93xx.pinctrl-ep9307",
+ .driver_data = (kernel_ulong_t)EP93XX_9307_PINCTRL,
+ },
+ {
+ .name = "soc_ep93xx.pinctrl-ep9312",
+ .driver_data = (kernel_ulong_t)EP93XX_9312_PINCTRL,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, ep93xx_pinctrl_ids);
+
+static struct auxiliary_driver ep93xx_pmx_driver = {
+ .probe = ep93xx_pmx_probe,
+ .id_table = ep93xx_pinctrl_ids,
+};
+module_auxiliary_driver(ep93xx_pmx_driver);
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 06/40] power: reset: Add a driver for the ep93xx reset
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (4 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 05/40] pinctrl: add a Cirrus ep93xx SoC pin controller Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 17:54 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 07/40] dt-bindings: soc: Add Cirrus EP93xx Nikita Shubin via B4 Relay
` (35 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Sebastian Reichel; +Cc: linux-kernel, linux-pm, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Implement the reset behaviour of the various EP93xx SoCS
in drivers/power/reset.
It used to be located in arch/arm/mach-ep93xx.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Sebastian Reichel <sre@kernel.org>
---
drivers/power/reset/Kconfig | 10 +++++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/ep93xx-restart.c | 80 ++++++++++++++++++++++++++++++++++++
3 files changed, 91 insertions(+)
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index fece990af4a7..389d5a193e5d 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -75,6 +75,16 @@ config POWER_RESET_BRCMSTB
Say Y here if you have a Broadcom STB board and you wish
to have restart support.
+config POWER_RESET_EP93XX
+ bool "Cirrus EP93XX reset driver" if COMPILE_TEST
+ depends on MFD_SYSCON
+ default ARCH_EP93XX
+ help
+ This driver provides restart support for Cirrus EP93XX SoC.
+
+ Say Y here if you have a Cirrus EP93XX SoC and you wish
+ to have restart support.
+
config POWER_RESET_GEMINI_POWEROFF
bool "Cortina Gemini power-off driver"
depends on ARCH_GEMINI || COMPILE_TEST
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index a95d1bd275d1..10782d32e1da 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_POWER_RESET_ATC260X) += atc260x-poweroff.o
obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o
obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
+obj-$(CONFIG_POWER_RESET_EP93XX) += ep93xx-restart.o
obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF) += gemini-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
diff --git a/drivers/power/reset/ep93xx-restart.c b/drivers/power/reset/ep93xx-restart.c
new file mode 100644
index 000000000000..3b051694459d
--- /dev/null
+++ b/drivers/power/reset/ep93xx-restart.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Cirrus EP93xx SoC reset driver
+ *
+ * Copyright (C) 2021 Nikita Shubin <nikita.shubin@maquefel.me>
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <linux/soc/cirrus/ep93xx.h>
+
+#define EP93XX_SYSCON_DEVCFG 0x80
+#define EP93XX_SYSCON_DEVCFG_SWRST BIT(31)
+
+struct ep93xx_restart {
+ struct ep93xx_regmap_adev *aux_dev;
+ struct notifier_block restart_handler;
+};
+
+static int ep93xx_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct ep93xx_restart *priv =
+ container_of(this, struct ep93xx_restart, restart_handler);
+ struct ep93xx_regmap_adev *aux = priv->aux_dev;
+
+ /* Issue the reboot */
+ aux->update_bits(aux->map, aux->lock, EP93XX_SYSCON_DEVCFG,
+ EP93XX_SYSCON_DEVCFG_SWRST, EP93XX_SYSCON_DEVCFG_SWRST);
+ aux->update_bits(aux->map, aux->lock, EP93XX_SYSCON_DEVCFG,
+ EP93XX_SYSCON_DEVCFG_SWRST, 0);
+
+ return NOTIFY_DONE;
+}
+
+static int ep93xx_reboot_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct ep93xx_regmap_adev *rdev = to_ep93xx_regmap_adev(adev);
+ struct device *dev = &adev->dev;
+ struct ep93xx_restart *priv;
+ int err;
+
+ if (!rdev->update_bits)
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->aux_dev = rdev;
+
+ priv->restart_handler.notifier_call = ep93xx_restart_handle;
+ priv->restart_handler.priority = 128;
+
+ err = register_restart_handler(&priv->restart_handler);
+ if (err)
+ return dev_err_probe(dev, err, "can't register restart notifier\n");
+
+ return 0;
+}
+
+static const struct auxiliary_device_id ep93xx_reboot_ids[] = {
+ {
+ .name = "soc_ep93xx.reset-ep93xx",
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, ep93xx_reboot_ids);
+
+static struct auxiliary_driver ep93xx_reboot_driver = {
+ .probe = ep93xx_reboot_probe,
+ .id_table = ep93xx_reboot_ids,
+};
+module_auxiliary_driver(ep93xx_reboot_driver);
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 07/40] dt-bindings: soc: Add Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (5 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 06/40] power: reset: Add a driver for the ep93xx reset Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 6:53 ` Krzysztof Kozlowski
2023-12-12 8:20 ` [PATCH v6 08/40] soc: Add SoC driver for Cirrus ep93xx Nikita Shubin via B4 Relay
` (34 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Michael Turquette, Stephen Boyd, Nikita Shubin,
Alexander Sverdlin
Cc: devicetree, linux-kernel, linux-clk, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add device tree bindings for the Cirrus Logic EP93xx SoC.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../bindings/arm/cirrus/cirrus,ep9301.yaml | 38 +++++++++
.../bindings/soc/cirrus/cirrus,ep9301-syscon.yaml | 94 ++++++++++++++++++++++
include/dt-bindings/clock/cirrus,ep9301-syscon.h | 46 +++++++++++
3 files changed, 178 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml b/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml
new file mode 100644
index 000000000000..170aad5dd7ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cirrus/cirrus,ep9301.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cirrus/cirrus,ep9301.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx platforms
+
+description:
+ The EP93xx SoC is a ARMv4T-based with 200 MHz ARM9 CPU.
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: The TS-7250 is a compact, full-featured Single Board
+ Computer (SBC) based upon the Cirrus EP9302 ARM9 CPU
+ items:
+ - const: technologic,ts7250
+ - const: cirrus,ep9301
+
+ - description: The Liebherr BK3 is a derivate from ts7250 board
+ items:
+ - const: liebherr,bk3
+ - const: cirrus,ep9301
+
+ - description: EDB302 is an evaluation board by Cirrus Logic,
+ based on a Cirrus Logic EP9302 CPU
+ items:
+ - const: cirrus,edb9302
+ - const: cirrus,ep9301
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml b/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml
new file mode 100644
index 000000000000..7cb1b4114985
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/cirrus/cirrus,ep9301-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx Platforms System Controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+description: |
+ Central resources are controlled by a set of software-locked registers,
+ which can be used to prevent accidental accesses. Syscon generates
+ the various bus and peripheral clocks and controls the system startup
+ configuration.
+
+ The System Controller (Syscon) provides:
+ - Clock control
+ - Power management
+ - System configuration management
+
+ Syscon registers are common for all EP93xx SoC's, through some actual peripheral
+ may be missing depending on actual SoC model.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - cirrus,ep9302-syscon
+ - cirrus,ep9307-syscon
+ - cirrus,ep9312-syscon
+ - cirrus,ep9315-syscon
+ - const: cirrus,ep9301-syscon
+ - const: syscon
+ - items:
+ - const: cirrus,ep9301-syscon
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ items:
+ - description: reference clock
+
+patternProperties:
+ '^pins-':
+ type: object
+ description: pin node
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+
+ properties:
+ function:
+ enum: [ spi, ac97, i2s, pwm, keypad, pata, lcd, gpio ]
+
+ groups:
+ enum: [ ssp, ac97, i2s_on_ssp, i2s_on_ac97, pwm1, gpio1agrp,
+ gpio2agrp, gpio3agrp, gpio4agrp, gpio6agrp, gpio7agrp,
+ rasteronsdram0grp, rasteronsdram3grp, keypadgrp, idegrp ]
+
+ required:
+ - function
+ - groups
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@80930000 {
+ compatible = "cirrus,ep9301-syscon", "syscon";
+ reg = <0x80930000 0x1000>;
+
+ #clock-cells = <1>;
+ clocks = <&xtali>;
+
+ spi_default_pins: pins-spi {
+ function = "spi";
+ groups = "ssp";
+ };
+ };
diff --git a/include/dt-bindings/clock/cirrus,ep9301-syscon.h b/include/dt-bindings/clock/cirrus,ep9301-syscon.h
new file mode 100644
index 000000000000..6bb8f532e7d0
--- /dev/null
+++ b/include/dt-bindings/clock/cirrus,ep9301-syscon.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+#ifndef DT_BINDINGS_CIRRUS_EP93XX_CLOCK_H
+#define DT_BINDINGS_CIRRUS_EP93XX_CLOCK_H
+
+#define EP93XX_CLK_PLL1 0
+#define EP93XX_CLK_PLL2 1
+
+#define EP93XX_CLK_FCLK 2
+#define EP93XX_CLK_HCLK 3
+#define EP93XX_CLK_PCLK 4
+
+#define EP93XX_CLK_UART 5
+#define EP93XX_CLK_SPI 6
+#define EP93XX_CLK_PWM 7
+#define EP93XX_CLK_USB 8
+
+#define EP93XX_CLK_M2M0 9
+#define EP93XX_CLK_M2M1 10
+
+#define EP93XX_CLK_M2P0 11
+#define EP93XX_CLK_M2P1 12
+#define EP93XX_CLK_M2P2 13
+#define EP93XX_CLK_M2P3 14
+#define EP93XX_CLK_M2P4 15
+#define EP93XX_CLK_M2P5 16
+#define EP93XX_CLK_M2P6 17
+#define EP93XX_CLK_M2P7 18
+#define EP93XX_CLK_M2P8 19
+#define EP93XX_CLK_M2P9 20
+
+#define EP93XX_CLK_UART1 21
+#define EP93XX_CLK_UART2 22
+#define EP93XX_CLK_UART3 23
+
+#define EP93XX_CLK_ADC 24
+#define EP93XX_CLK_ADC_EN 25
+
+#define EP93XX_CLK_KEYPAD 26
+
+#define EP93XX_CLK_VIDEO 27
+
+#define EP93XX_CLK_I2S_MCLK 28
+#define EP93XX_CLK_I2S_SCLK 29
+#define EP93XX_CLK_I2S_LRCLK 30
+
+#endif /* DT_BINDINGS_CIRRUS_EP93XX_CLOCK_H */
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 08/40] soc: Add SoC driver for Cirrus ep93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (6 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 07/40] dt-bindings: soc: Add Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 18:37 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 09/40] dt-bindings: dma: Add Cirrus EP93xx Nikita Shubin via B4 Relay
` (33 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Conor Dooley, Ulf Hansson, Joel Stanley, Walker Chen,
Jonathan Neuschäfer, Nikita Shubin, Huisong Li,
Arnd Bergmann, Wei Xu, Emil Renner Berthing, Linus Walleij,
Alexander Sverdlin
Cc: Hal Feng, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add an SoC driver for the ep93xx. Currently there is only one thing
not fitting into any other framework, and that is the swlock setting.
Used for clock settings, pinctrl and restart.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/cirrus/Kconfig | 13 +++
drivers/soc/cirrus/Makefile | 2 +
drivers/soc/cirrus/soc-ep93xx.c | 247 ++++++++++++++++++++++++++++++++++++++++
5 files changed, 264 insertions(+)
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 10a9ff84ff41..47692deb68e4 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -7,6 +7,7 @@ source "drivers/soc/aspeed/Kconfig"
source "drivers/soc/atmel/Kconfig"
source "drivers/soc/bcm/Kconfig"
source "drivers/soc/canaan/Kconfig"
+source "drivers/soc/cirrus/Kconfig"
source "drivers/soc/fsl/Kconfig"
source "drivers/soc/fujitsu/Kconfig"
source "drivers/soc/hisilicon/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 0706a27d13be..6bfd520c325a 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -8,6 +8,7 @@ obj-y += aspeed/
obj-$(CONFIG_ARCH_AT91) += atmel/
obj-y += bcm/
obj-$(CONFIG_SOC_CANAAN) += canaan/
+obj-$(CONFIG_EP93XX_SOC) += cirrus/
obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-y += fsl/
diff --git a/drivers/soc/cirrus/Kconfig b/drivers/soc/cirrus/Kconfig
new file mode 100644
index 000000000000..306499692e8c
--- /dev/null
+++ b/drivers/soc/cirrus/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+if ARCH_EP93XX
+
+config EP93XX_SOC
+ bool "Cirrus EP93xx chips SoC"
+ select SOC_BUS
+ select AUXILIARY_BUS
+ default y if !EP93XX_SOC_COMMON
+ help
+ Support SoC for Cirrus EP93xx chips.
+
+endif
diff --git a/drivers/soc/cirrus/Makefile b/drivers/soc/cirrus/Makefile
new file mode 100644
index 000000000000..9e6608b67f76
--- /dev/null
+++ b/drivers/soc/cirrus/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += soc-ep93xx.o
diff --git a/drivers/soc/cirrus/soc-ep93xx.c b/drivers/soc/cirrus/soc-ep93xx.c
new file mode 100644
index 000000000000..82c176e288cc
--- /dev/null
+++ b/drivers/soc/cirrus/soc-ep93xx.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SoC driver for Cirrus EP93xx chips.
+ * Copyright (C) 2022 Nikita Shubin <nikita.shubin@maquefel.me>
+ *
+ * Based on a rewrite of arch/arm/mach-ep93xx/core.c
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * Thanks go to Michael Burian and Ray Lehtiniemi for their key
+ * role in the ep93xx Linux community
+ */
+
+#include <linux/bits.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include <linux/soc/cirrus/ep93xx.h>
+
+#define EP93XX_SYSCON_DEVCFG 0x80
+
+#define EP93XX_SWLOCK_MAGICK 0xaa
+#define EP93XX_SYSCON_SWLOCK 0xc0
+#define EP93XX_SYSCON_SYSCFG 0x9c
+#define EP93XX_SYSCON_SYSCFG_REV_MASK GENMASK(31, 28)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT 28
+
+struct ep93xx_map_info {
+ spinlock_t lock;
+ void __iomem *base;
+ struct regmap *map;
+};
+
+/*
+ * EP93xx System Controller software locked register write
+ *
+ * Logic safeguards are included to condition the control signals for
+ * power connection to the matrix to prevent part damage. In addition, a
+ * software lock register is included that must be written with 0xAA
+ * before each register write to change the values of the four switch
+ * matrix control registers.
+ */
+static void ep93xx_regmap_write(struct regmap *map, spinlock_t *lock,
+ unsigned int reg, unsigned int val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(lock, flags);
+
+ regmap_write(map, EP93XX_SYSCON_SWLOCK, EP93XX_SWLOCK_MAGICK);
+ regmap_write(map, reg, val);
+
+ spin_unlock_irqrestore(lock, flags);
+}
+
+static void ep93xx_regmap_update_bits(struct regmap *map, spinlock_t *lock,
+ unsigned int reg, unsigned int mask,
+ unsigned int val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(lock, flags);
+
+ regmap_write(map, EP93XX_SYSCON_SWLOCK, EP93XX_SWLOCK_MAGICK);
+ /* force write is required to clear swlock if is no changes are made */
+ regmap_update_bits_base(map, reg, mask, val, NULL, false, true);
+
+ spin_unlock_irqrestore(lock, flags);
+}
+
+static void ep93xx_unregister_adev(void *_adev)
+{
+ struct auxiliary_device *adev = _adev;
+
+ auxiliary_device_delete(adev);
+ auxiliary_device_uninit(adev);
+}
+
+static void ep93xx_adev_release(struct device *dev)
+{
+ struct auxiliary_device *adev = to_auxiliary_dev(dev);
+
+ kfree(adev);
+}
+
+static struct auxiliary_device *ep93xx_adev_alloc(struct device *parent, const char *name,
+ struct ep93xx_map_info *info)
+{
+ struct ep93xx_regmap_adev *rdev;
+ struct auxiliary_device *adev;
+ int ret;
+
+ rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
+ if (!rdev)
+ return ERR_PTR(-ENOMEM);
+
+ rdev->map = info->map;
+ rdev->base = info->base;
+ rdev->lock = &info->lock;
+ rdev->write = ep93xx_regmap_write;
+ rdev->update_bits = ep93xx_regmap_update_bits;
+
+ adev = &rdev->adev;
+ adev->name = name;
+ adev->dev.parent = parent;
+ adev->dev.release = ep93xx_adev_release;
+
+ ret = auxiliary_device_init(adev);
+ if (ret) {
+ kfree(adev);
+ return ERR_PTR(ret);
+ }
+
+ return adev;
+}
+
+static int ep93xx_controller_register(struct device *parent, const char *name,
+ struct ep93xx_map_info *info)
+{
+ struct auxiliary_device *adev;
+ int ret;
+
+ adev = ep93xx_adev_alloc(parent, name, info);
+ if (IS_ERR(adev))
+ return PTR_ERR(adev);
+
+ ret = auxiliary_device_add(adev);
+ if (ret) {
+ auxiliary_device_uninit(adev);
+ return ret;
+ }
+
+ return devm_add_action_or_reset(parent, ep93xx_unregister_adev, adev);
+}
+
+static unsigned int __init ep93xx_soc_revision(struct regmap *map)
+{
+ unsigned int val;
+
+ regmap_read(map, EP93XX_SYSCON_SYSCFG, &val);
+ val &= EP93XX_SYSCON_SYSCFG_REV_MASK;
+ val >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
+ return val;
+}
+
+static const char __init *ep93xx_get_soc_rev(struct regmap *map)
+{
+ switch (ep93xx_soc_revision(map)) {
+ case EP93XX_CHIP_REV_D0:
+ return "D0";
+ case EP93XX_CHIP_REV_D1:
+ return "D1";
+ case EP93XX_CHIP_REV_E0:
+ return "E0";
+ case EP93XX_CHIP_REV_E1:
+ return "E1";
+ case EP93XX_CHIP_REV_E2:
+ return "E2";
+ default:
+ return "unknown";
+ }
+}
+
+const char *pinctrl_names[] = {
+ "pinctrl-ep9301", /* EP93XX_9301_SOC */
+ "pinctrl-ep9307", /* EP93XX_9307_SOC */
+ "pinctrl-ep9312", /* EP93XX_9312_SOC */
+};
+
+static int __init ep93xx_syscon_probe(struct platform_device *pdev)
+{
+ enum ep93xx_soc_model model = (int)(uintptr_t)of_device_get_match_data(&pdev->dev);
+ struct ep93xx_map_info *map_info;
+ struct soc_device_attribute *attrs;
+ struct soc_device *soc_dev;
+ struct device *dev = &pdev->dev;
+ struct regmap *map;
+ void __iomem *base;
+ int ret;
+
+ map = device_node_to_regmap(dev->of_node);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ attrs = devm_kzalloc(dev, sizeof(*attrs), GFP_KERNEL);
+ if (!attrs)
+ return -ENOMEM;
+
+ attrs->machine = of_flat_dt_get_machine_name();
+ attrs->family = "Cirrus Logic EP93xx";
+ attrs->revision = ep93xx_get_soc_rev(map);
+
+ soc_dev = soc_device_register(attrs);
+ if (IS_ERR(soc_dev))
+ return PTR_ERR(soc_dev);
+
+ map_info = devm_kzalloc(dev, sizeof(*map_info), GFP_KERNEL);
+ if (!map_info)
+ return -ENOMEM;
+
+ spin_lock_init(&map_info->lock);
+ map_info->map = map;
+ map_info->base = base;
+
+ ret = ep93xx_controller_register(dev, pinctrl_names[model], map_info);
+ if (ret)
+ dev_err(dev, "registering pinctrl controller failed\n");
+
+ ret = ep93xx_controller_register(dev, "clk-ep93xx", map_info);
+ if (ret)
+ dev_err(dev, "registering clock controller failed\n");
+
+ ret = ep93xx_controller_register(dev, "reset-ep93xx", map_info);
+ if (ret)
+ dev_err(dev, "registering reset controller failed\n");
+
+ dev_info(dev, "EP93xx SoC revision %s\n", attrs->revision);
+
+ return 0;
+}
+
+static const struct of_device_id ep9301_syscon_of_device_ids[] = {
+ { .compatible = "cirrus,ep9301-syscon", .data = (void *)EP93XX_9301_SOC },
+ { .compatible = "cirrus,ep9302-syscon", .data = (void *)EP93XX_9301_SOC },
+ { .compatible = "cirrus,ep9307-syscon", .data = (void *)EP93XX_9307_SOC },
+ { .compatible = "cirrus,ep9312-syscon", .data = (void *)EP93XX_9312_SOC },
+ { .compatible = "cirrus,ep9315-syscon", .data = (void *)EP93XX_9312_SOC },
+ { /* sentinel */ }
+};
+
+static struct platform_driver ep9301_syscon_driver = {
+ .driver = {
+ .name = "ep9301-syscon",
+ .of_match_table = ep9301_syscon_of_device_ids,
+ },
+};
+builtin_platform_driver_probe(ep9301_syscon_driver, ep93xx_syscon_probe);
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 09/40] dt-bindings: dma: Add Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (7 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 08/40] soc: Add SoC driver for Cirrus ep93xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 10/40] dma: cirrus: Convert to DT for " Nikita Shubin via B4 Relay
` (32 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Alexander Sverdlin, Nikita Shubin
Cc: dmaengine, devicetree, linux-kernel, Arnd Bergmann, Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add YAML bindings for ep93xx SoC DMA.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../bindings/dma/cirrus,ep9301-dma-m2m.yaml | 84 ++++++++++++
.../bindings/dma/cirrus,ep9301-dma-m2p.yaml | 144 +++++++++++++++++++++
2 files changed, 228 insertions(+)
diff --git a/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml
new file mode 100644
index 000000000000..871b76ddf90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx SoC DMA controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-dma-m2m
+ - items:
+ - enum:
+ - cirrus,ep9302-dma-m2m
+ - cirrus,ep9307-dma-m2m
+ - cirrus,ep9312-dma-m2m
+ - cirrus,ep9315-dma-m2m
+ - const: cirrus,ep9301-dma-m2m
+
+ reg:
+ items:
+ - description: m2m0 channel registers
+ - description: m2m1 channel registers
+
+ clocks:
+ items:
+ - description: m2m0 channel gate clock
+ - description: m2m1 channel gate clock
+
+ clock-names:
+ items:
+ - const: m2m0
+ - const: m2m1
+
+ interrupts:
+ items:
+ - description: m2m0 channel interrupt
+ - description: m2m1 channel interrupt
+
+ '#dma-cells':
+ const: 2
+ description: |
+ The first cell is the unique device channel number as indicated by this
+ table for ep93xx:
+
+ 10: SPI controller
+ 11: IDE controller
+
+ The second cell is the DMA direction line number:
+
+ 1: Memory to device
+ 2: Device to memory
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ dma-controller@80000100 {
+ compatible = "cirrus,ep9301-dma-m2m";
+ reg = <0x80000100 0x0040>,
+ <0x80000140 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2M0>,
+ <&syscon EP93XX_CLK_M2M1>;
+ clock-names = "m2m0", "m2m1";
+ interrupt-parent = <&vic0>;
+ interrupts = <17>, <18>;
+ #dma-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml
new file mode 100644
index 000000000000..d14c31553543
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx SoC M2P DMA controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-dma-m2p
+ - items:
+ - enum:
+ - cirrus,ep9302-dma-m2p
+ - cirrus,ep9307-dma-m2p
+ - cirrus,ep9312-dma-m2p
+ - cirrus,ep9315-dma-m2p
+ - const: cirrus,ep9301-dma-m2p
+
+ reg:
+ items:
+ - description: m2p0 channel registers
+ - description: m2p1 channel registers
+ - description: m2p2 channel registers
+ - description: m2p3 channel registers
+ - description: m2p4 channel registers
+ - description: m2p5 channel registers
+ - description: m2p6 channel registers
+ - description: m2p7 channel registers
+ - description: m2p8 channel registers
+ - description: m2p9 channel registers
+
+ clocks:
+ items:
+ - description: m2p0 channel gate clock
+ - description: m2p1 channel gate clock
+ - description: m2p2 channel gate clock
+ - description: m2p3 channel gate clock
+ - description: m2p4 channel gate clock
+ - description: m2p5 channel gate clock
+ - description: m2p6 channel gate clock
+ - description: m2p7 channel gate clock
+ - description: m2p8 channel gate clock
+ - description: m2p9 channel gate clock
+
+ clock-names:
+ items:
+ - const: m2p0
+ - const: m2p1
+ - const: m2p2
+ - const: m2p3
+ - const: m2p4
+ - const: m2p5
+ - const: m2p6
+ - const: m2p7
+ - const: m2p8
+ - const: m2p9
+
+ interrupts:
+ items:
+ - description: m2p0 channel interrupt
+ - description: m2p1 channel interrupt
+ - description: m2p2 channel interrupt
+ - description: m2p3 channel interrupt
+ - description: m2p4 channel interrupt
+ - description: m2p5 channel interrupt
+ - description: m2p6 channel interrupt
+ - description: m2p7 channel interrupt
+ - description: m2p8 channel interrupt
+ - description: m2p9 channel interrupt
+
+ '#dma-cells':
+ const: 2
+ description: |
+ The first cell is the unique device channel number as indicated by this
+ table for ep93xx:
+
+ 0: I2S channel 1
+ 1: I2S channel 2 (unused)
+ 2: AC97 channel 1 (unused)
+ 3: AC97 channel 2 (unused)
+ 4: AC97 channel 3 (unused)
+ 5: I2S channel 3 (unused)
+ 6: UART1 (unused)
+ 7: UART2 (unused)
+ 8: UART3 (unused)
+ 9: IRDA (unused)
+
+ The second cell is the DMA direction line number:
+
+ 1: Memory to device
+ 2: Device to memory
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ dma-controller@80000000 {
+ compatible = "cirrus,ep9301-dma-m2p";
+ reg = <0x80000000 0x0040>,
+ <0x80000040 0x0040>,
+ <0x80000080 0x0040>,
+ <0x800000c0 0x0040>,
+ <0x80000240 0x0040>,
+ <0x80000200 0x0040>,
+ <0x800002c0 0x0040>,
+ <0x80000280 0x0040>,
+ <0x80000340 0x0040>,
+ <0x80000300 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2P0>,
+ <&syscon EP93XX_CLK_M2P1>,
+ <&syscon EP93XX_CLK_M2P2>,
+ <&syscon EP93XX_CLK_M2P3>,
+ <&syscon EP93XX_CLK_M2P4>,
+ <&syscon EP93XX_CLK_M2P5>,
+ <&syscon EP93XX_CLK_M2P6>,
+ <&syscon EP93XX_CLK_M2P7>,
+ <&syscon EP93XX_CLK_M2P8>,
+ <&syscon EP93XX_CLK_M2P9>;
+ clock-names = "m2p0", "m2p1",
+ "m2p2", "m2p3",
+ "m2p4", "m2p5",
+ "m2p6", "m2p7",
+ "m2p8", "m2p9";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+ #dma-cells = <2>;
+ };
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 10/40] dma: cirrus: Convert to DT for Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (8 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 09/40] dt-bindings: dma: Add Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 18:28 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 11/40] dt-bindings: watchdog: Add Cirrus EP93x Nikita Shubin via B4 Relay
` (31 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Vinod Koul, Nikita Shubin, Alexander Sverdlin
Cc: dmaengine, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Convert Cirrus EP93xx DMA to device tree usage:
- add OF ID match table with data
- add of_probe for device tree
- add xlate for m2m/m2p
- drop subsys_initcall code
- drop platform probe
- drop platform structs usage
From now only it supports only device tree probing.
Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/dma/ep93xx_dma.c | 238 ++++++++++++++++++++++++-------
include/linux/platform_data/dma-ep93xx.h | 6 +
2 files changed, 191 insertions(+), 53 deletions(-)
diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index d6c60635e90d..b7dd8361f490 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -20,6 +20,8 @@
#include <linux/dmaengine.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <linux/of_dma.h>
+#include <linux/overflow.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -104,6 +106,11 @@
#define DMA_MAX_CHAN_BYTES 0xffff
#define DMA_MAX_CHAN_DESCRIPTORS 32
+enum ep93xx_dma_type {
+ M2P_DMA,
+ M2M_DMA,
+};
+
struct ep93xx_dma_engine;
static int ep93xx_dma_slave_config_write(struct dma_chan *chan,
enum dma_transfer_direction dir,
@@ -129,11 +136,17 @@ struct ep93xx_dma_desc {
struct list_head node;
};
+struct ep93xx_dma_chan_cfg {
+ u8 port;
+ enum dma_transfer_direction dir;
+};
+
/**
* struct ep93xx_dma_chan - an EP93xx DMA M2P/M2M channel
* @chan: dmaengine API channel
* @edma: pointer to the engine device
* @regs: memory mapped registers
+ * @dma_cfg: channel number, direction
* @irq: interrupt number of the channel
* @clk: clock used by this channel
* @tasklet: channel specific tasklet used for callbacks
@@ -157,14 +170,12 @@ struct ep93xx_dma_desc {
* descriptor in the chain. When a descriptor is moved to the @active queue,
* the first and chained descriptors are flattened into a single list.
*
- * @chan.private holds pointer to &struct ep93xx_dma_data which contains
- * necessary channel configuration information. For memcpy channels this must
- * be %NULL.
*/
struct ep93xx_dma_chan {
struct dma_chan chan;
const struct ep93xx_dma_engine *edma;
void __iomem *regs;
+ struct ep93xx_dma_chan_cfg dma_cfg;
int irq;
struct clk *clk;
struct tasklet_struct tasklet;
@@ -216,6 +227,11 @@ struct ep93xx_dma_engine {
struct ep93xx_dma_chan channels[] __counted_by(num_channels);
};
+struct ep93xx_edma_data {
+ u32 id;
+ size_t num_channels;
+};
+
static inline struct device *chan2dev(struct ep93xx_dma_chan *edmac)
{
return &edmac->chan.dev->device;
@@ -318,10 +334,9 @@ static void m2p_set_control(struct ep93xx_dma_chan *edmac, u32 control)
static int m2p_hw_setup(struct ep93xx_dma_chan *edmac)
{
- struct ep93xx_dma_data *data = edmac->chan.private;
u32 control;
- writel(data->port & 0xf, edmac->regs + M2P_PPALLOC);
+ writel(edmac->dma_cfg.port & 0xf, edmac->regs + M2P_PPALLOC);
control = M2P_CONTROL_CH_ERROR_INT | M2P_CONTROL_ICE
| M2P_CONTROL_ENABLE;
@@ -458,16 +473,15 @@ static int m2p_hw_interrupt(struct ep93xx_dma_chan *edmac)
static int m2m_hw_setup(struct ep93xx_dma_chan *edmac)
{
- const struct ep93xx_dma_data *data = edmac->chan.private;
u32 control = 0;
- if (!data) {
+ if (edmac->dma_cfg.dir == DMA_MEM_TO_MEM) {
/* This is memcpy channel, nothing to configure */
writel(control, edmac->regs + M2M_CONTROL);
return 0;
}
- switch (data->port) {
+ switch (edmac->dma_cfg.port) {
case EP93XX_DMA_SSP:
/*
* This was found via experimenting - anything less than 5
@@ -477,7 +491,7 @@ static int m2m_hw_setup(struct ep93xx_dma_chan *edmac)
control = (5 << M2M_CONTROL_PWSC_SHIFT);
control |= M2M_CONTROL_NO_HDSK;
- if (data->direction == DMA_MEM_TO_DEV) {
+ if (edmac->dma_cfg.dir == DMA_MEM_TO_DEV) {
control |= M2M_CONTROL_DAH;
control |= M2M_CONTROL_TM_TX;
control |= M2M_CONTROL_RSS_SSPTX;
@@ -493,7 +507,7 @@ static int m2m_hw_setup(struct ep93xx_dma_chan *edmac)
* This IDE part is totally untested. Values below are taken
* from the EP93xx Users's Guide and might not be correct.
*/
- if (data->direction == DMA_MEM_TO_DEV) {
+ if (edmac->dma_cfg.dir == DMA_MEM_TO_DEV) {
/* Worst case from the UG */
control = (3 << M2M_CONTROL_PWSC_SHIFT);
control |= M2M_CONTROL_DAH;
@@ -548,7 +562,6 @@ static void m2m_fill_desc(struct ep93xx_dma_chan *edmac)
static void m2m_hw_submit(struct ep93xx_dma_chan *edmac)
{
- struct ep93xx_dma_data *data = edmac->chan.private;
u32 control = readl(edmac->regs + M2M_CONTROL);
/*
@@ -574,7 +587,7 @@ static void m2m_hw_submit(struct ep93xx_dma_chan *edmac)
control |= M2M_CONTROL_ENABLE;
writel(control, edmac->regs + M2M_CONTROL);
- if (!data) {
+ if (edmac->dma_cfg.dir == DMA_MEM_TO_MEM) {
/*
* For memcpy channels the software trigger must be asserted
* in order to start the memcpy operation.
@@ -636,7 +649,7 @@ static int m2m_hw_interrupt(struct ep93xx_dma_chan *edmac)
*/
if (ep93xx_dma_advance_active(edmac)) {
m2m_fill_desc(edmac);
- if (done && !edmac->chan.private) {
+ if (done && edmac->dma_cfg.dir == DMA_MEM_TO_MEM) {
/* Software trigger for memcpy channel */
control = readl(edmac->regs + M2M_CONTROL);
control |= M2M_CONTROL_START;
@@ -867,25 +880,22 @@ static dma_cookie_t ep93xx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan)
{
struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan);
- struct ep93xx_dma_data *data = chan->private;
const char *name = dma_chan_name(chan);
int ret, i;
/* Sanity check the channel parameters */
if (!edmac->edma->m2m) {
- if (!data)
+ if (edmac->dma_cfg.port < EP93XX_DMA_I2S1 ||
+ edmac->dma_cfg.port > EP93XX_DMA_IRDA)
return -EINVAL;
- if (data->port < EP93XX_DMA_I2S1 ||
- data->port > EP93XX_DMA_IRDA)
- return -EINVAL;
- if (data->direction != ep93xx_dma_chan_direction(chan))
+ if (edmac->dma_cfg.dir != ep93xx_dma_chan_direction(chan))
return -EINVAL;
} else {
- if (data) {
- switch (data->port) {
+ if (edmac->dma_cfg.dir != DMA_MEM_TO_MEM) {
+ switch (edmac->dma_cfg.port) {
case EP93XX_DMA_SSP:
case EP93XX_DMA_IDE:
- if (!is_slave_direction(data->direction))
+ if (!is_slave_direction(edmac->dma_cfg.dir))
return -EINVAL;
break;
default:
@@ -894,9 +904,6 @@ static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan)
}
}
- if (data && data->name)
- name = data->name;
-
ret = clk_prepare_enable(edmac->clk);
if (ret)
return ret;
@@ -1315,35 +1322,51 @@ static void ep93xx_dma_issue_pending(struct dma_chan *chan)
ep93xx_dma_advance_work(to_ep93xx_dma_chan(chan));
}
-static int __init ep93xx_dma_probe(struct platform_device *pdev)
+static struct ep93xx_dma_engine *ep93xx_dma_of_probe(struct platform_device *pdev)
{
- struct ep93xx_dma_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ const struct ep93xx_edma_data *data;
+ struct device *dev = &pdev->dev;
struct ep93xx_dma_engine *edma;
struct dma_device *dma_dev;
- int ret, i;
+ char dma_clk_name[5];
+ int i;
- edma = kzalloc(struct_size(edma, channels, pdata->num_channels), GFP_KERNEL);
+ data = device_get_match_data(dev);
+ if (!data)
+ return ERR_PTR(dev_err_probe(dev, -ENODEV, "No device match found\n"));
+
+ edma = devm_kzalloc(dev, struct_size(edma, channels, data->num_channels),
+ GFP_KERNEL);
if (!edma)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
+ edma->m2m = data->id;
+ edma->num_channels = data->num_channels;
dma_dev = &edma->dma_dev;
- edma->m2m = platform_get_device_id(pdev)->driver_data;
- edma->num_channels = pdata->num_channels;
INIT_LIST_HEAD(&dma_dev->channels);
- for (i = 0; i < pdata->num_channels; i++) {
- const struct ep93xx_dma_chan_data *cdata = &pdata->channels[i];
+ for (i = 0; i < edma->num_channels; i++) {
struct ep93xx_dma_chan *edmac = &edma->channels[i];
edmac->chan.device = dma_dev;
- edmac->regs = cdata->base;
- edmac->irq = cdata->irq;
+ edmac->regs = devm_platform_ioremap_resource(pdev, i);
+ if (IS_ERR(edmac->regs))
+ return edmac->regs;
+
+ edmac->irq = fwnode_irq_get(dev_fwnode(dev), i);
+ if (edmac->irq < 0)
+ return ERR_PTR(edmac->irq);
+
edmac->edma = edma;
- edmac->clk = clk_get(NULL, cdata->name);
+ if (edma->m2m)
+ sprintf(dma_clk_name, "m2m%u", i);
+ else
+ sprintf(dma_clk_name, "m2p%u", i);
+
+ edmac->clk = devm_clk_get(dev, dma_clk_name);
if (IS_ERR(edmac->clk)) {
- dev_warn(&pdev->dev, "failed to get clock for %s\n",
- cdata->name);
+ dev_warn(dev, "failed to get clock\n");
continue;
}
@@ -1357,6 +1380,92 @@ static int __init ep93xx_dma_probe(struct platform_device *pdev)
&dma_dev->channels);
}
+ return edma;
+}
+
+static bool ep93xx_m2p_dma_filter(struct dma_chan *chan, void *filter_param)
+{
+ struct ep93xx_dma_chan *echan = to_ep93xx_dma_chan(chan);
+ struct ep93xx_dma_chan_cfg *cfg = filter_param;
+
+ if (cfg->dir == ep93xx_dma_chan_direction(chan)) {
+ echan->dma_cfg = *cfg;
+ return true;
+ }
+
+ return false;
+}
+
+static struct dma_chan *ep93xx_m2p_dma_of_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct ep93xx_dma_engine *edma = ofdma->of_dma_data;
+ dma_cap_mask_t mask = edma->dma_dev.cap_mask;
+ struct ep93xx_dma_chan_cfg dma_cfg;
+ u8 port = dma_spec->args[0];
+ u8 direction = dma_spec->args[1];
+
+ if (port > EP93XX_DMA_IRDA)
+ return NULL;
+
+ if (!is_slave_direction(direction))
+ return NULL;
+
+
+ dma_cfg.port = port;
+ dma_cfg.dir = direction;
+
+ return __dma_request_channel(&mask, ep93xx_m2p_dma_filter, &dma_cfg, ofdma->of_node);
+}
+
+static bool ep93xx_m2m_dma_filter(struct dma_chan *chan, void *filter_param)
+{
+ struct ep93xx_dma_chan *echan = to_ep93xx_dma_chan(chan);
+ struct ep93xx_dma_chan_cfg *cfg = filter_param;
+
+ echan->dma_cfg = *cfg;
+
+ return true;
+}
+
+static struct dma_chan *ep93xx_m2m_dma_of_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct ep93xx_dma_engine *edma = ofdma->of_dma_data;
+ dma_cap_mask_t mask = edma->dma_dev.cap_mask;
+ struct ep93xx_dma_chan_cfg dma_cfg;
+ u8 port = dma_spec->args[0];
+ u8 direction = dma_spec->args[1];
+
+ switch (port) {
+ case EP93XX_DMA_SSP:
+ case EP93XX_DMA_IDE:
+ break;
+ default:
+ return NULL;
+ }
+
+ if (!is_slave_direction(direction))
+ return NULL;
+
+ dma_cfg.port = port;
+ dma_cfg.dir = direction;
+
+ return __dma_request_channel(&mask, ep93xx_m2m_dma_filter, &dma_cfg, ofdma->of_node);
+}
+
+static int ep93xx_dma_probe(struct platform_device *pdev)
+{
+ struct ep93xx_dma_engine *edma;
+ struct dma_device *dma_dev;
+ int ret;
+
+ edma = ep93xx_dma_of_probe(pdev);
+ if (!edma)
+ return PTR_ERR(edma);
+
+ dma_dev = &edma->dma_dev;
+
dma_cap_zero(dma_dev->cap_mask);
dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
dma_cap_set(DMA_CYCLIC, dma_dev->cap_mask);
@@ -1393,21 +1502,46 @@ static int __init ep93xx_dma_probe(struct platform_device *pdev)
}
ret = dma_async_device_register(dma_dev);
- if (unlikely(ret)) {
- for (i = 0; i < edma->num_channels; i++) {
- struct ep93xx_dma_chan *edmac = &edma->channels[i];
- if (!IS_ERR_OR_NULL(edmac->clk))
- clk_put(edmac->clk);
- }
- kfree(edma);
+ if (ret)
+ return ret;
+
+ if (edma->m2m) {
+ ret = of_dma_controller_register(pdev->dev.of_node, ep93xx_m2m_dma_of_xlate,
+ edma);
} else {
- dev_info(dma_dev->dev, "EP93xx M2%s DMA ready\n",
- edma->m2m ? "M" : "P");
+ ret = of_dma_controller_register(pdev->dev.of_node, ep93xx_m2p_dma_of_xlate,
+ edma);
}
+ if (ret)
+ goto err_dma_unregister;
+
+ dev_info(dma_dev->dev, "EP93xx M2%s DMA ready\n", edma->m2m ? "M" : "P");
+
+ return 0;
+
+err_dma_unregister:
+ dma_async_device_unregister(dma_dev);
return ret;
}
+static const struct ep93xx_edma_data edma_m2p = {
+ .id = M2P_DMA,
+ .num_channels = 10,
+};
+
+static const struct ep93xx_edma_data edma_m2m = {
+ .id = M2M_DMA,
+ .num_channels = 2,
+};
+
+static const struct of_device_id ep93xx_dma_of_ids[] = {
+ { .compatible = "cirrus,ep9301-dma-m2p", .data = &edma_m2p },
+ { .compatible = "cirrus,ep9301-dma-m2m", .data = &edma_m2m },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ep93xx_dma_of_ids);
+
static const struct platform_device_id ep93xx_dma_driver_ids[] = {
{ "ep93xx-dma-m2p", 0 },
{ "ep93xx-dma-m2m", 1 },
@@ -1417,15 +1551,13 @@ static const struct platform_device_id ep93xx_dma_driver_ids[] = {
static struct platform_driver ep93xx_dma_driver = {
.driver = {
.name = "ep93xx-dma",
+ .of_match_table = ep93xx_dma_of_ids,
},
.id_table = ep93xx_dma_driver_ids,
+ .probe = ep93xx_dma_probe,
};
-static int __init ep93xx_dma_module_init(void)
-{
- return platform_driver_probe(&ep93xx_dma_driver, ep93xx_dma_probe);
-}
-subsys_initcall(ep93xx_dma_module_init);
+module_platform_driver(ep93xx_dma_driver);
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
MODULE_DESCRIPTION("EP93xx DMA driver");
diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h
index eb9805bb3fe8..67d65f1cb564 100644
--- a/include/linux/platform_data/dma-ep93xx.h
+++ b/include/linux/platform_data/dma-ep93xx.h
@@ -2,6 +2,9 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
+#include <linux/device.h>
+#include <linux/property.h>
+#include <linux/string.h>
#include <linux/types.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
@@ -70,6 +73,9 @@ struct ep93xx_dma_platform_data {
static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
{
+ if (device_is_compatible(chan->device->dev, "cirrus,ep9301-dma-m2p"))
+ return true;
+
return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
}
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 11/40] dt-bindings: watchdog: Add Cirrus EP93x
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (9 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 10/40] dma: cirrus: Convert to DT for " Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 12/40] watchdog: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
` (30 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Nikita Shubin,
Alexander Sverdlin
Cc: linux-watchdog, devicetree, linux-kernel, Arnd Bergmann,
Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add device tree bindings for the Cirrus Logic EP93xx watchdog block
used in these SoCs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../bindings/watchdog/cirrus,ep9301-wdt.yaml | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/cirrus,ep9301-wdt.yaml b/Documentation/devicetree/bindings/watchdog/cirrus,ep9301-wdt.yaml
new file mode 100644
index 000000000000..5dbe891c70c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/cirrus,ep9301-wdt.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/cirrus,ep9301-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx Watchdog Timer
+
+maintainers:
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-wdt
+ - items:
+ - enum:
+ - cirrus,ep9302-wdt
+ - cirrus,ep9307-wdt
+ - cirrus,ep9312-wdt
+ - cirrus,ep9315-wdt
+ - const: cirrus,ep9301-wdt
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@80940000 {
+ compatible = "cirrus,ep9301-wdt";
+ reg = <0x80940000 0x08>;
+ };
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 12/40] watchdog: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (10 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 11/40] dt-bindings: watchdog: Add Cirrus EP93x Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 17:56 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 13/40] dt-bindings: pwm: Add " Nikita Shubin via B4 Relay
` (29 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck
Cc: linux-watchdog, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add OF ID match table.
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/watchdog/ep93xx_wdt.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index 59dfd7f6bf0b..af89b7bb8f66 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -19,6 +19,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/watchdog.h>
#include <linux/io.h>
@@ -127,9 +128,16 @@ static int ep93xx_wdt_probe(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id ep93xx_wdt_of_ids[] = {
+ { .compatible = "cirrus,ep9301-wdt" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ep93xx_wdt_of_ids);
+
static struct platform_driver ep93xx_wdt_driver = {
.driver = {
.name = "ep93xx-wdt",
+ .of_match_table = ep93xx_wdt_of_ids,
},
.probe = ep93xx_wdt_probe,
};
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 13/40] dt-bindings: pwm: Add Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (11 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 12/40] watchdog: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 14/40] pwm: ep93xx: add DT support for " Nikita Shubin via B4 Relay
` (28 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Thierry Reding, Uwe Kleine-König, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Alexander Sverdlin,
Nikita Shubin
Cc: linux-pwm, devicetree, linux-kernel, Arnd Bergmann, Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add YAML bindings for ep93xx SoC PWM.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml | 53 ++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/Documentation/devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml b/Documentation/devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml
new file mode 100644
index 000000000000..903210ef9c31
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/cirrus,ep9301-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx PWM controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-pwm
+ - items:
+ - enum:
+ - cirrus,ep9302-pwm
+ - cirrus,ep9307-pwm
+ - cirrus,ep9312-pwm
+ - cirrus,ep9315-pwm
+ - const: cirrus,ep9301-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SoC PWM clock
+
+ "#pwm-cells":
+ const: 3
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ pwm@80910000 {
+ compatible = "cirrus,ep9301-pwm";
+ reg = <0x80910000 0x10>;
+ clocks = <&syscon EP93XX_CLK_PWM>;
+ #pwm-cells = <3>;
+ };
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 14/40] pwm: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (12 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 13/40] dt-bindings: pwm: Add " Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 17:56 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 15/40] dt-bindings: spi: Add " Nikita Shubin via B4 Relay
` (27 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Thierry Reding, Uwe Kleine-König
Cc: linux-pwm, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add OF ID match table.
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/pwm/pwm-ep93xx.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c
index 51e072572a87..7cf05d0b78fb 100644
--- a/drivers/pwm/pwm-ep93xx.c
+++ b/drivers/pwm/pwm-ep93xx.c
@@ -17,6 +17,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/clk.h>
@@ -189,9 +190,16 @@ static int ep93xx_pwm_probe(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id ep93xx_pwm_of_ids[] = {
+ { .compatible = "cirrus,ep9301-pwm" },
+ { /* sentinel */}
+};
+MODULE_DEVICE_TABLE(of, ep93xx_pwm_of_ids);
+
static struct platform_driver ep93xx_pwm_driver = {
.driver = {
.name = "ep93xx-pwm",
+ .of_match_table = ep93xx_pwm_of_ids,
},
.probe = ep93xx_pwm_probe,
};
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 15/40] dt-bindings: spi: Add Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (13 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 14/40] pwm: ep93xx: add DT support for " Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 16/40] spi: ep93xx: add DT support for " Nikita Shubin via B4 Relay
` (26 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Mark Brown, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Alexander Sverdlin, Nikita Shubin
Cc: linux-spi, devicetree, linux-kernel, Arnd Bergmann, Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add YAML bindings for ep93xx SoC SPI.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../devicetree/bindings/spi/cirrus,ep9301-spi.yaml | 70 ++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml b/Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml
new file mode 100644
index 000000000000..73980a27dc00
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cirrus,ep9301-spi.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cirrus,ep9301-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx SoC SPI controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-spi
+ - items:
+ - enum:
+ - cirrus,ep9302-spi
+ - cirrus,ep9307-spi
+ - cirrus,ep9312-spi
+ - cirrus,ep9315-spi
+ - const: cirrus,ep9301-spi
+
+ reg:
+ items:
+ - description: SPI registers region
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: SPI Controller reference clock source
+
+ dmas:
+ items:
+ - description: rx DMA channel
+ - description: tx DMA channel
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ spi@808a0000 {
+ compatible = "cirrus,ep9301-spi";
+ reg = <0x808a0000 0x18>;
+ interrupt-parent = <&vic1>;
+ interrupts = <21>;
+ clocks = <&syscon EP93XX_CLK_SPI>;
+ dmas = <&dma1 10 2>, <&dma1 10 1>;
+ dma-names = "rx", "tx";
+ cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ };
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 16/40] spi: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (14 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 15/40] dt-bindings: spi: Add " Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 18:13 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 17/40] dt-bindings: net: Add " Nikita Shubin via B4 Relay
` (25 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Mark Brown; +Cc: linux-spi, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
- add OF ID match table
- add device tree DMA request, so we can probe defer, in case DMA is not
ready yet
- drop DMA platform code
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/spi/spi-ep93xx.c | 68 ++++++++++++++++++------------------------------
1 file changed, 25 insertions(+), 43 deletions(-)
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index a1d60e51c053..01df1f8ae680 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -18,18 +18,18 @@
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/property.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/scatterlist.h>
#include <linux/spi/spi.h>
-#include <linux/platform_data/dma-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-
#define SSPCR0 0x0000
#define SSPCR0_SPO BIT(6)
#define SSPCR0_SPH BIT(7)
@@ -92,8 +92,6 @@ struct ep93xx_spi {
size_t fifo_level;
struct dma_chan *dma_rx;
struct dma_chan *dma_tx;
- struct ep93xx_dma_data dma_rx_data;
- struct ep93xx_dma_data dma_tx_data;
struct sg_table rx_sgt;
struct sg_table tx_sgt;
void *zeropage;
@@ -575,46 +573,25 @@ static int ep93xx_spi_unprepare_hardware(struct spi_controller *host)
return 0;
}
-static bool ep93xx_spi_dma_filter(struct dma_chan *chan, void *filter_param)
+static int ep93xx_spi_setup_dma(struct device *dev, struct ep93xx_spi *espi)
{
- if (ep93xx_dma_chan_is_m2p(chan))
- return false;
-
- chan->private = filter_param;
- return true;
-}
-
-static int ep93xx_spi_setup_dma(struct ep93xx_spi *espi)
-{
- dma_cap_mask_t mask;
int ret;
espi->zeropage = (void *)get_zeroed_page(GFP_KERNEL);
if (!espi->zeropage)
return -ENOMEM;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- espi->dma_rx_data.port = EP93XX_DMA_SSP;
- espi->dma_rx_data.direction = DMA_DEV_TO_MEM;
- espi->dma_rx_data.name = "ep93xx-spi-rx";
-
- espi->dma_rx = dma_request_channel(mask, ep93xx_spi_dma_filter,
- &espi->dma_rx_data);
- if (!espi->dma_rx) {
- ret = -ENODEV;
+ espi->dma_rx = dma_request_chan(dev, "rx");
+ if (IS_ERR(espi->dma_rx)) {
+ ret = PTR_ERR(espi->dma_rx);
+ dev_err_probe(dev, ret, "rx DMA setup failed");
goto fail_free_page;
}
- espi->dma_tx_data.port = EP93XX_DMA_SSP;
- espi->dma_tx_data.direction = DMA_MEM_TO_DEV;
- espi->dma_tx_data.name = "ep93xx-spi-tx";
-
- espi->dma_tx = dma_request_channel(mask, ep93xx_spi_dma_filter,
- &espi->dma_tx_data);
- if (!espi->dma_tx) {
- ret = -ENODEV;
+ espi->dma_tx = dma_request_chan(dev, "tx");
+ if (IS_ERR(espi->dma_tx)) {
+ ret = PTR_ERR(espi->dma_tx);
+ dev_err_probe(dev, ret, "tx DMA setup failed");
goto fail_release_rx;
}
@@ -647,18 +624,11 @@ static void ep93xx_spi_release_dma(struct ep93xx_spi *espi)
static int ep93xx_spi_probe(struct platform_device *pdev)
{
struct spi_controller *host;
- struct ep93xx_spi_info *info;
struct ep93xx_spi *espi;
struct resource *res;
int irq;
int error;
- info = dev_get_platdata(&pdev->dev);
- if (!info) {
- dev_err(&pdev->dev, "missing platform data\n");
- return -EINVAL;
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
@@ -713,12 +683,17 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
goto fail_release_host;
}
- if (info->use_dma && ep93xx_spi_setup_dma(espi))
+ error = ep93xx_spi_setup_dma(&pdev->dev, espi);
+ if (error == -EPROBE_DEFER)
+ goto fail_release_host;
+
+ if (error)
dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n");
/* make sure that the hardware is disabled */
writel(0, espi->mmio + SSPCR1);
+ device_set_node(&host->dev, dev_fwnode(&pdev->dev));
error = devm_spi_register_controller(&pdev->dev, host);
if (error) {
dev_err(&pdev->dev, "failed to register SPI host\n");
@@ -746,9 +721,16 @@ static void ep93xx_spi_remove(struct platform_device *pdev)
ep93xx_spi_release_dma(espi);
}
+static const struct of_device_id ep93xx_spi_of_ids[] = {
+ { .compatible = "cirrus,ep9301-spi" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ep93xx_spi_of_ids);
+
static struct platform_driver ep93xx_spi_driver = {
.driver = {
.name = "ep93xx-spi",
+ .of_match_table = ep93xx_spi_of_ids,
},
.probe = ep93xx_spi_probe,
.remove_new = ep93xx_spi_remove,
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 17/40] dt-bindings: net: Add Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (15 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 16/40] spi: ep93xx: add DT support for " Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 18/40] net: cirrus: add DT support for " Nikita Shubin via B4 Relay
` (24 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Alexander Sverdlin, Nikita Shubin
Cc: netdev, devicetree, linux-kernel, Arnd Bergmann, Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add YAML bindings for ep93xx SoC Ethernet Controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../devicetree/bindings/net/cirrus,ep9301-eth.yaml | 59 ++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/cirrus,ep9301-eth.yaml b/Documentation/devicetree/bindings/net/cirrus,ep9301-eth.yaml
new file mode 100644
index 000000000000..ad0915307095
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cirrus,ep9301-eth.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cirrus,ep9301-eth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx SoC Ethernet Controller
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-eth
+ - items:
+ - enum:
+ - cirrus,ep9302-eth
+ - cirrus,ep9307-eth
+ - cirrus,ep9312-eth
+ - cirrus,ep9315-eth
+ - const: cirrus,ep9301-eth
+
+ reg:
+ items:
+ - description: The physical base address and size of IO range
+
+ interrupts:
+ items:
+ - description: Combined signal for various interrupt events
+
+ phy-handle: true
+
+ mdio:
+ $ref: mdio.yaml#
+ unevaluatedProperties: false
+ description: optional node for embedded MDIO controller
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - phy-handle
+
+additionalProperties: false
+
+examples:
+ - |
+ ethernet@80010000 {
+ compatible = "cirrus,ep9301-eth";
+ reg = <0x80010000 0x10000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <7>;
+ phy-handle = <&phy0>;
+ };
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 18/40] net: cirrus: add DT support for Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (16 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 17/40] dt-bindings: net: Add " Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 18:39 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 19/40] dt-bindings: mtd: Add ts7200 nand-controller Nikita Shubin via B4 Relay
` (23 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni
Cc: netdev, linux-kernel, Arnd Bergmann, Andrew Lunn
From: Nikita Shubin <nikita.shubin@maquefel.me>
- add OF ID match table
- get phy_id from the device tree, as part of mdio
- copy_addr is now always used, as there is no SoC/board that aren't
- dropped platform header
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/net/ethernet/cirrus/ep93xx_eth.c | 63 ++++++++++++++++----------------
1 file changed, 32 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/cirrus/ep93xx_eth.c b/drivers/net/ethernet/cirrus/ep93xx_eth.c
index 1c2a540db13d..be0b11014af7 100644
--- a/drivers/net/ethernet/cirrus/ep93xx_eth.c
+++ b/drivers/net/ethernet/cirrus/ep93xx_eth.c
@@ -16,13 +16,12 @@
#include <linux/ethtool.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/platform_data/eth-ep93xx.h>
-
#define DRV_MODULE_NAME "ep93xx-eth"
#define RX_QUEUE_ENTRIES 64
@@ -738,25 +737,6 @@ static const struct net_device_ops ep93xx_netdev_ops = {
.ndo_set_mac_address = eth_mac_addr,
};
-static struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data)
-{
- struct net_device *dev;
-
- dev = alloc_etherdev(sizeof(struct ep93xx_priv));
- if (dev == NULL)
- return NULL;
-
- eth_hw_addr_set(dev, data->dev_addr);
-
- dev->ethtool_ops = &ep93xx_ethtool_ops;
- dev->netdev_ops = &ep93xx_netdev_ops;
-
- dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
-
- return dev;
-}
-
-
static void ep93xx_eth_remove(struct platform_device *pdev)
{
struct net_device *dev;
@@ -786,27 +766,47 @@ static void ep93xx_eth_remove(struct platform_device *pdev)
static int ep93xx_eth_probe(struct platform_device *pdev)
{
- struct ep93xx_eth_data *data;
struct net_device *dev;
struct ep93xx_priv *ep;
struct resource *mem;
+ void __iomem *base_addr;
+ struct device_node *np;
+ u32 phy_id;
int irq;
int err;
if (pdev == NULL)
return -ENODEV;
- data = dev_get_platdata(&pdev->dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!mem || irq < 0)
return -ENXIO;
- dev = ep93xx_dev_alloc(data);
+ base_addr = ioremap(mem->start, resource_size(mem));
+ if (!base_addr)
+ return dev_err_probe(&pdev->dev, -EIO, "Failed to ioremap ethernet registers\n");
+
+ np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
+ if (!np)
+ return dev_err_probe(&pdev->dev, -ENODEV, "Please provide \"phy-handle\"\n");
+
+ err = of_property_read_u32(np, "reg", &phy_id);
+ of_node_put(np);
+ if (err)
+ return dev_err_probe(&pdev->dev, -ENOENT, "Failed to locate \"phy_id\"\n");
+
+ dev = alloc_etherdev(sizeof(struct ep93xx_priv));
if (dev == NULL) {
err = -ENOMEM;
goto err_out;
}
+
+ eth_hw_addr_set(dev, base_addr + 0x50);
+ dev->ethtool_ops = &ep93xx_ethtool_ops;
+ dev->netdev_ops = &ep93xx_netdev_ops;
+ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
+
ep = netdev_priv(dev);
ep->dev = dev;
SET_NETDEV_DEV(dev, &pdev->dev);
@@ -822,15 +822,10 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
goto err_out;
}
- ep->base_addr = ioremap(mem->start, resource_size(mem));
- if (ep->base_addr == NULL) {
- dev_err(&pdev->dev, "Failed to ioremap ethernet registers\n");
- err = -EIO;
- goto err_out;
- }
+ ep->base_addr = base_addr;
ep->irq = irq;
- ep->mii.phy_id = data->phy_id;
+ ep->mii.phy_id = phy_id;
ep->mii.phy_id_mask = 0x1f;
ep->mii.reg_num_mask = 0x1f;
ep->mii.dev = dev;
@@ -857,12 +852,18 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
return err;
}
+static const struct of_device_id ep93xx_eth_of_ids[] = {
+ { .compatible = "cirrus,ep9301-eth" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ep93xx_eth_of_ids);
static struct platform_driver ep93xx_eth_driver = {
.probe = ep93xx_eth_probe,
.remove_new = ep93xx_eth_remove,
.driver = {
.name = "ep93xx-eth",
+ .of_match_table = ep93xx_eth_of_ids,
},
};
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 19/40] dt-bindings: mtd: Add ts7200 nand-controller
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (17 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 18/40] net: cirrus: add DT support for " Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 20/40] mtd: rawnand: add support for ts72xx Nikita Shubin via B4 Relay
` (22 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Nikita Shubin
Cc: linux-mtd, devicetree, linux-kernel, Arnd Bergmann, Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add YAML bindings for ts7200 NAND Controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../devicetree/bindings/mtd/technologic,nand.yaml | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/technologic,nand.yaml b/Documentation/devicetree/bindings/mtd/technologic,nand.yaml
new file mode 100644
index 000000000000..f9d87c46094b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/technologic,nand.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/technologic,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Technologic Systems NAND controller
+
+maintainers:
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: nand-controller.yaml
+
+properties:
+ compatible:
+ oneOf:
+ - const: technologic,ts7200-nand
+ - items:
+ - enum:
+ - technologic,ts7300-nand
+ - technologic,ts7260-nand
+ - technologic,ts7250-nand
+ - const: technologic,ts7200-nand
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ nand-controller@60000000 {
+ compatible = "technologic,ts7200-nand";
+ reg = <0x60000000 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ nand@0 {
+ reg = <0>;
+ };
+ };
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 20/40] mtd: rawnand: add support for ts72xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (18 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 19/40] dt-bindings: mtd: Add ts7200 nand-controller Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:30 ` Greg Kroah-Hartman
2023-12-15 10:16 ` Miquel Raynal
2023-12-12 8:20 ` [PATCH v6 21/40] dt-bindings: ata: Add Cirrus EP93xx Nikita Shubin via B4 Relay
` (21 subsequent siblings)
41 siblings, 2 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Arnd Bergmann, Linus Walleij, Christophe Kerello,
Krzysztof Kozlowski, Nikita Shubin, Neil Armstrong,
Chris Packham, Johan Jonker
Cc: Greg Kroah-Hartman, Jonathan Cameron, linux-kernel, linux-mtd,
Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Technologic Systems has it's own nand controller implementation in CPLD.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/mtd/nand/raw/Kconfig | 7 +
drivers/mtd/nand/raw/Makefile | 1 +
drivers/mtd/nand/raw/technologic-nand-controller.c | 220 +++++++++++++++++++++
3 files changed, 228 insertions(+)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index cbf8ae85e1ae..3937c10dea1c 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -449,6 +449,13 @@ config MTD_NAND_RENESAS
Enables support for the NAND controller found on Renesas R-Car
Gen3 and RZ/N1 SoC families.
+config MTD_NAND_TS72XX
+ tristate "ts72xx NAND controller"
+ depends on ARCH_EP93XX && HAS_IOMEM
+ help
+ Enables support for NAND controller on ts72xx SBCs.
+ This is a legacy driver based on gen_nand.
+
comment "Misc"
config MTD_SM_COMMON
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 25120a4afada..d0b0e6b83568 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_MLC_LPC32XX) += lpc32xx_mlc.o
obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
+obj-$(CONFIG_MTD_NAND_TS72XX) += technologic-nand-controller.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
diff --git a/drivers/mtd/nand/raw/technologic-nand-controller.c b/drivers/mtd/nand/raw/technologic-nand-controller.c
new file mode 100644
index 000000000000..63157e7b5572
--- /dev/null
+++ b/drivers/mtd/nand/raw/technologic-nand-controller.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technologic Systems TS72xx NAND controller driver
+ *
+ * Copyright (C) 2023 Nikita Shubin <nikita.shubin@maquefel.me>
+ *
+ * Derived from: plat_nand.c
+ * Author: Vitaly Wool <vitalywool@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/platnand.h>
+
+#define TS72XX_NAND_CONTROL_ADDR_LINE BIT(22) /* 0xN0400000 */
+#define TS72XX_NAND_BUSY_ADDR_LINE BIT(23) /* 0xN0800000 */
+
+#define TS72XX_NAND_ALE BIT(0)
+#define TS72XX_NAND_CLE BIT(1)
+#define TS72XX_NAND_NCE BIT(2)
+
+#define TS72XX_NAND_CTRL_CLE (TS72XX_NAND_NCE | TS72XX_NAND_CLE)
+#define TS72XX_NAND_CTRL_ALE (TS72XX_NAND_NCE | TS72XX_NAND_ALE)
+
+struct ts72xx_nand_data {
+ struct nand_controller controller;
+ struct nand_chip chip;
+ void __iomem *base;
+ void __iomem *ctrl;
+ void __iomem *busy;
+};
+
+static inline struct ts72xx_nand_data *chip_to_ts72xx(struct nand_chip *chip)
+{
+ return container_of(chip, struct ts72xx_nand_data, chip);
+}
+
+static int ts72xx_nand_attach_chip(struct nand_chip *chip)
+{
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
+ return -EINVAL;
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
+ fallthrough;
+ default:
+ return 0;
+ }
+}
+
+static void ts72xx_nand_ctrl(struct nand_chip *chip, u8 value)
+{
+ struct ts72xx_nand_data *data = chip_to_ts72xx(chip);
+ unsigned char bits = ioread8(data->ctrl) & ~GENMASK(2, 0);
+
+ iowrite8(bits | value, data->ctrl);
+}
+
+static int ts72xx_nand_exec_instr(struct nand_chip *chip,
+ const struct nand_op_instr *instr)
+{
+ struct ts72xx_nand_data *data = chip_to_ts72xx(chip);
+ unsigned int timeout_us;
+ u32 status;
+ int ret;
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ ts72xx_nand_ctrl(chip, TS72XX_NAND_CTRL_CLE);
+ iowrite8(instr->ctx.cmd.opcode, data->base);
+ ts72xx_nand_ctrl(chip, TS72XX_NAND_NCE);
+ break;
+
+ case NAND_OP_ADDR_INSTR:
+ ts72xx_nand_ctrl(chip, TS72XX_NAND_CTRL_ALE);
+ iowrite8_rep(data->base, instr->ctx.addr.addrs, instr->ctx.addr.naddrs);
+ ts72xx_nand_ctrl(chip, TS72XX_NAND_NCE);
+ break;
+
+ case NAND_OP_DATA_IN_INSTR:
+ ioread8_rep(data->base, instr->ctx.data.buf.in, instr->ctx.data.len);
+ break;
+
+ case NAND_OP_DATA_OUT_INSTR:
+ iowrite8_rep(data->base, instr->ctx.data.buf.in, instr->ctx.data.len);
+ break;
+
+ case NAND_OP_WAITRDY_INSTR:
+ timeout_us = instr->ctx.waitrdy.timeout_ms * 1000;
+ ret = readb_poll_timeout(data->busy, status, status & BIT(5), 0, timeout_us);
+ if (ret)
+ return ret;
+
+ break;
+ }
+
+ if (instr->delay_ns)
+ ndelay(instr->delay_ns);
+
+ return 0;
+}
+
+static int ts72xx_nand_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op, bool check_only)
+{
+ unsigned int i;
+ int ret;
+
+ if (check_only)
+ return 0;
+
+ for (i = 0; i < op->ninstrs; i++) {
+ ret = ts72xx_nand_exec_instr(chip, &op->instrs[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct nand_controller_ops ts72xx_nand_ops = {
+ .attach_chip = ts72xx_nand_attach_chip,
+ .exec_op = ts72xx_nand_exec_op,
+};
+
+static int ts72xx_nand_probe(struct platform_device *pdev)
+{
+ struct ts72xx_nand_data *data;
+ struct fwnode_handle *child;
+ struct mtd_info *mtd;
+ int err;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ nand_controller_init(&data->controller);
+ data->controller.ops = &ts72xx_nand_ops;
+ data->chip.controller = &data->controller;
+
+ data->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(data->base))
+ return PTR_ERR(data->base);
+ data->ctrl = data->base + TS72XX_NAND_CONTROL_ADDR_LINE;
+ data->busy = data->base + TS72XX_NAND_BUSY_ADDR_LINE;
+
+ child = fwnode_get_next_child_node(dev_fwnode(&pdev->dev), NULL);
+ if (!child)
+ return dev_err_probe(&pdev->dev, -ENXIO,
+ "ts72xx controller node should have exactly one child\n");
+
+ nand_set_flash_node(&data->chip, to_of_node(child));
+ mtd = nand_to_mtd(&data->chip);
+ mtd->dev.parent = &pdev->dev;
+ platform_set_drvdata(pdev, data);
+
+ /*
+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
+ * Set ->engine_type before registering the NAND devices in order to
+ * provide a driver specific default value.
+ */
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
+ /* Scan to find existence of the device */
+ err = nand_scan(&data->chip, 1);
+ if (err)
+ goto err_handle_put;
+
+ err = mtd_device_parse_register(mtd, NULL, NULL, NULL, 0);
+ if (err)
+ goto err_clean_nand;
+
+ return 0;
+
+err_clean_nand:
+ nand_cleanup(&data->chip);
+err_handle_put:
+ fwnode_handle_put(child);
+ return err;
+}
+
+static void ts72xx_nand_remove(struct platform_device *pdev)
+{
+ struct ts72xx_nand_data *data = platform_get_drvdata(pdev);
+ struct nand_chip *chip = &data->chip;
+ int ret;
+
+ ret = mtd_device_unregister(nand_to_mtd(chip));
+ WARN_ON(ret);
+ nand_cleanup(chip);
+}
+
+static const struct of_device_id ts72xx_id_table[] = {
+ { .compatible = "technologic,ts7200-nand" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ts72xx_id_table);
+
+static struct platform_driver ts72xx_nand_driver = {
+ .driver = {
+ .name = "ts72xx-nand",
+ .of_match_table = ts72xx_id_table,
+ },
+ .probe = ts72xx_nand_probe,
+ .remove_new = ts72xx_nand_remove,
+};
+module_platform_driver(ts72xx_nand_driver);
+
+MODULE_AUTHOR("Nikita Shubin <nikita.shubin@maquefel.me>");
+MODULE_DESCRIPTION("Technologic Systems TS72xx NAND controller driver");
+MODULE_LICENSE("GPL");
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 21/40] dt-bindings: ata: Add Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (19 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 20/40] mtd: rawnand: add support for ts72xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 22/40] ata: pata_ep93xx: add device tree support Nikita Shubin via B4 Relay
` (20 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Damien Le Moal, Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-ide, devicetree, linux-kernel, Arnd Bergmann, Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add YAML bindings for ep93xx SoC PATA.
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../bindings/ata/cirrus,ep9312-pata.yaml | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml b/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml
new file mode 100644
index 000000000000..8130923fdc72
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cirrus,ep9312-pata.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cirrus,ep9312-pata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP9312 PATA controller
+
+maintainers:
+ - Damien Le Moal <dlemoal@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9312-pata
+ - items:
+ - const: cirrus,ep9315-pata
+ - const: cirrus,ep9312-pata
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ ide@800a0000 {
+ compatible = "cirrus,ep9312-pata";
+ reg = <0x800a0000 0x38>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ide_default_pins>;
+ };
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 22/40] ata: pata_ep93xx: add device tree support
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (20 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 21/40] dt-bindings: ata: Add Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 18:19 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 23/40] dt-bindings: input: Add Cirrus EP93xx keypad Nikita Shubin via B4 Relay
` (19 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Sergey Shtylyov, Damien Le Moal; +Cc: linux-ide, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
- add OF ID match table
- drop platform DMA and filters
- change DMA setup to OF, so we can defer probe
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/ata/pata_ep93xx.c | 81 +++++++++++++++++++++++++----------------------
1 file changed, 43 insertions(+), 38 deletions(-)
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index c84a20892f1b..3f33916c2d23 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -44,8 +44,8 @@
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/ktime.h>
+#include <linux/mod_devicetable.h>
-#include <linux/platform_data/dma-ep93xx.h>
#include <linux/soc/cirrus/ep93xx.h>
#define DRV_NAME "ep93xx-ide"
@@ -126,7 +126,7 @@ enum {
};
struct ep93xx_pata_data {
- const struct platform_device *pdev;
+ struct platform_device *pdev;
void __iomem *ide_base;
struct ata_timing t;
bool iordy;
@@ -135,9 +135,7 @@ struct ep93xx_pata_data {
unsigned long udma_out_phys;
struct dma_chan *dma_rx_channel;
- struct ep93xx_dma_data dma_rx_data;
struct dma_chan *dma_tx_channel;
- struct ep93xx_dma_data dma_tx_data;
};
static void ep93xx_pata_clear_regs(void __iomem *base)
@@ -637,20 +635,13 @@ static void ep93xx_pata_release_dma(struct ep93xx_pata_data *drv_data)
}
}
-static bool ep93xx_pata_dma_filter(struct dma_chan *chan, void *filter_param)
+static int ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
{
- if (ep93xx_dma_chan_is_m2p(chan))
- return false;
-
- chan->private = filter_param;
- return true;
-}
-
-static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
-{
- const struct platform_device *pdev = drv_data->pdev;
+ struct platform_device *pdev = drv_data->pdev;
+ struct device *dev = &pdev->dev;
dma_cap_mask_t mask;
struct dma_slave_config conf;
+ int ret;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
@@ -660,22 +651,17 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
* to request only one channel, and reprogram it's direction at
* start of new transfer.
*/
- drv_data->dma_rx_data.port = EP93XX_DMA_IDE;
- drv_data->dma_rx_data.direction = DMA_DEV_TO_MEM;
- drv_data->dma_rx_data.name = "ep93xx-pata-rx";
- drv_data->dma_rx_channel = dma_request_channel(mask,
- ep93xx_pata_dma_filter, &drv_data->dma_rx_data);
- if (!drv_data->dma_rx_channel)
- return;
+ drv_data->dma_rx_channel = dma_request_chan(dev, "rx");
+ if (IS_ERR(drv_data->dma_rx_channel)) {
+ ret = PTR_ERR(drv_data->dma_rx_channel);
+ return dev_err_probe(dev, ret, "rx DMA setup failed");
+ }
- drv_data->dma_tx_data.port = EP93XX_DMA_IDE;
- drv_data->dma_tx_data.direction = DMA_MEM_TO_DEV;
- drv_data->dma_tx_data.name = "ep93xx-pata-tx";
- drv_data->dma_tx_channel = dma_request_channel(mask,
- ep93xx_pata_dma_filter, &drv_data->dma_tx_data);
- if (!drv_data->dma_tx_channel) {
- dma_release_channel(drv_data->dma_rx_channel);
- return;
+ drv_data->dma_tx_channel = dma_request_chan(&pdev->dev, "tx");
+ if (IS_ERR(drv_data->dma_tx_channel)) {
+ ret = PTR_ERR(drv_data->dma_tx_channel);
+ dev_err_probe(dev, ret, "tx DMA setup failed");
+ goto fail_release_rx;
}
/* Configure receive channel direction and source address */
@@ -683,10 +669,10 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
conf.direction = DMA_DEV_TO_MEM;
conf.src_addr = drv_data->udma_in_phys;
conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) {
- dev_err(&pdev->dev, "failed to configure rx dma channel\n");
- ep93xx_pata_release_dma(drv_data);
- return;
+ ret = dmaengine_slave_config(drv_data->dma_rx_channel, &conf);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to configure rx dma channel");
+ goto fail_release_dma;
}
/* Configure transmit channel direction and destination address */
@@ -694,10 +680,20 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
conf.direction = DMA_MEM_TO_DEV;
conf.dst_addr = drv_data->udma_out_phys;
conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) {
- dev_err(&pdev->dev, "failed to configure tx dma channel\n");
- ep93xx_pata_release_dma(drv_data);
+ ret = dmaengine_slave_config(drv_data->dma_tx_channel, &conf);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to configure tx dma channel");
+ goto fail_release_dma;
}
+
+ return 0;
+
+fail_release_rx:
+ dma_release_channel(drv_data->dma_rx_channel);
+fail_release_dma:
+ ep93xx_pata_release_dma(drv_data);
+
+ return ret;
}
static void ep93xx_pata_dma_start(struct ata_queued_cmd *qc)
@@ -954,7 +950,9 @@ static int ep93xx_pata_probe(struct platform_device *pdev)
drv_data->ide_base = ide_base;
drv_data->udma_in_phys = mem_res->start + IDEUDMADATAIN;
drv_data->udma_out_phys = mem_res->start + IDEUDMADATAOUT;
- ep93xx_pata_dma_init(drv_data);
+ err = ep93xx_pata_dma_init(drv_data);
+ if (err)
+ return err;
/* allocate host */
host = ata_host_alloc(&pdev->dev, 1);
@@ -1021,9 +1019,16 @@ static void ep93xx_pata_remove(struct platform_device *pdev)
ep93xx_ide_release_gpio(pdev);
}
+static const struct of_device_id ep93xx_pata_of_ids[] = {
+ { .compatible = "cirrus,ep9312-pata" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ep93xx_pata_of_ids);
+
static struct platform_driver ep93xx_pata_platform_driver = {
.driver = {
.name = DRV_NAME,
+ .of_match_table = ep93xx_pata_of_ids,
},
.probe = ep93xx_pata_probe,
.remove_new = ep93xx_pata_remove,
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 23/40] dt-bindings: input: Add Cirrus EP93xx keypad
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (21 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 22/40] ata: pata_ep93xx: add device tree support Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 24/40] input: keypad: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
` (18 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Alexander Sverdlin
Cc: linux-input, devicetree, linux-kernel, Arnd Bergmann,
Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add YAML bindings for ep93xx SoC keypad.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../bindings/input/cirrus,ep9307-keypad.yaml | 87 ++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml
new file mode 100644
index 000000000000..a0d2460c55ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cirrus,ep9307-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus ep93xx keypad
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+allOf:
+ - $ref: /schemas/input/matrix-keymap.yaml#
+
+description:
+ The KPP is designed to interface with a keypad matrix with 2-point contact
+ or 3-point contact keys. The KPP is designed to simplify the software task
+ of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+ and decoding one or multiple keys pressed simultaneously on a keypad.
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9307-keypad
+ - items:
+ - enum:
+ - cirrus,ep9312-keypad
+ - cirrus,ep9315-keypad
+ - const: cirrus,ep9307-keypad
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ debounce-delay-ms:
+ description: |
+ Time in microseconds that key must be pressed or
+ released for state change interrupt to trigger.
+
+ cirrus,prescale:
+ description: row/column counter pre-scaler load value
+ $ref: /schemas/types.yaml#/definitions/uint16
+ maximum: 1023
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+ keypad@800f0000 {
+ compatible = "cirrus,ep9307-keypad";
+ reg = <0x800f0000 0x0c>;
+ interrupt-parent = <&vic0>;
+ interrupts = <29>;
+ clocks = <&eclk EP93XX_CLK_KEYPAD>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_default_pins>;
+ linux,keymap = <KEY_UP>,
+ <KEY_DOWN>,
+ <KEY_VOLUMEDOWN>,
+ <KEY_HOME>,
+ <KEY_RIGHT>,
+ <KEY_LEFT>,
+ <KEY_ENTER>,
+ <KEY_VOLUMEUP>,
+ <KEY_F6>,
+ <KEY_F8>,
+ <KEY_F9>,
+ <KEY_F10>,
+ <KEY_F1>,
+ <KEY_F2>,
+ <KEY_F3>,
+ <KEY_POWER>;
+ };
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 24/40] input: keypad: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (22 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 23/40] dt-bindings: input: Add Cirrus EP93xx keypad Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 18:41 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 25/40] dt-bindings: wdt: Add ts72xx Nikita Shubin via B4 Relay
` (17 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, Alexander Sverdlin, Russell King,
Dmitry Torokhov, Nikita Shubin, Uwe Kleine-König,
Linus Walleij, Damien Le Moal, Sergey Shtylyov
Cc: Andy Shevchenko, linux-arm-kernel, linux-kernel, linux-input,
Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
- drop flags, they were not used anyway
- add OF ID match table
- process "autorepeat", "debounce-delay-ms", prescale from device tree
- drop platform data usage and it's header
- keymap goes from device tree now on
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/mach-ep93xx/core.c | 46 ---------------------
drivers/input/keyboard/ep93xx_keypad.c | 74 ++++++++++------------------------
include/linux/soc/cirrus/ep93xx.h | 4 --
3 files changed, 22 insertions(+), 102 deletions(-)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 03bce5e9d1f1..b99c46d22c4d 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -697,52 +697,6 @@ void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
platform_device_register(&ep93xx_keypad_device);
}
-int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
-{
- int err;
- int i;
-
- for (i = 0; i < 8; i++) {
- err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
- if (err)
- goto fail_gpio_c;
- err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
- if (err)
- goto fail_gpio_d;
- }
-
- /* Enable the keypad controller; GPIO ports C and D used for keypad */
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
- EP93XX_SYSCON_DEVCFG_GONK);
-
- return 0;
-
-fail_gpio_d:
- gpio_free(EP93XX_GPIO_LINE_C(i));
-fail_gpio_c:
- for (--i; i >= 0; --i) {
- gpio_free(EP93XX_GPIO_LINE_C(i));
- gpio_free(EP93XX_GPIO_LINE_D(i));
- }
- return err;
-}
-EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
-
-void ep93xx_keypad_release_gpio(struct platform_device *pdev)
-{
- int i;
-
- for (i = 0; i < 8; i++) {
- gpio_free(EP93XX_GPIO_LINE_C(i));
- gpio_free(EP93XX_GPIO_LINE_D(i));
- }
-
- /* Disable the keypad controller; GPIO ports C and D used for GPIO */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
- EP93XX_SYSCON_DEVCFG_GONK);
-}
-EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
-
/*************************************************************************
* EP93xx I2S audio peripheral handling
*************************************************************************/
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 6b811d6bf625..515880c194c9 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -6,20 +6,13 @@
*
* Based on the pxa27x matrix keypad controller by Rodolfo Giometti.
*
- * NOTE:
- *
- * The 3-key reset is triggered by pressing the 3 keys in
- * Row 0, Columns 2, 4, and 7 at the same time. This action can
- * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag.
- *
- * Normal operation for the matrix does not autorepeat the key press.
- * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT
- * flag.
*/
#include <linux/bits.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -27,7 +20,6 @@
#include <linux/input/matrix_keypad.h>
#include <linux/slab.h>
#include <linux/soc/cirrus/ep93xx.h>
-#include <linux/platform_data/keypad-ep93xx.h>
#include <linux/pm_wakeirq.h>
/*
@@ -61,12 +53,16 @@
#define KEY_REG_KEY1_MASK GENMASK(5, 0)
#define KEY_REG_KEY1_SHIFT 0
+#define EP93XX_MATRIX_ROWS (8)
+#define EP93XX_MATRIX_COLS (8)
+
#define EP93XX_MATRIX_SIZE (EP93XX_MATRIX_ROWS * EP93XX_MATRIX_COLS)
struct ep93xx_keypad {
- struct ep93xx_keypad_platform_data *pdata;
struct input_dev *input_dev;
struct clk *clk;
+ unsigned int debounce;
+ uint16_t prescale;
void __iomem *mmio_base;
@@ -133,23 +129,11 @@ static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
static void ep93xx_keypad_config(struct ep93xx_keypad *keypad)
{
- struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
unsigned int val = 0;
- clk_set_rate(keypad->clk, pdata->clk_rate);
+ val |= ((keypad->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK);
- if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY)
- val |= KEY_INIT_DIS3KY;
- if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE)
- val |= KEY_INIT_DIAG;
- if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE)
- val |= KEY_INIT_BACK;
- if (pdata->flags & EP93XX_KEYPAD_TEST_MODE)
- val |= KEY_INIT_T2;
-
- val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK);
-
- val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
+ val |= ((keypad->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
__raw_writel(val, keypad->mmio_base + KEY_INIT);
}
@@ -220,17 +204,10 @@ static int ep93xx_keypad_resume(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops,
ep93xx_keypad_suspend, ep93xx_keypad_resume);
-static void ep93xx_keypad_release_gpio_action(void *_pdev)
-{
- struct platform_device *pdev = _pdev;
-
- ep93xx_keypad_release_gpio(pdev);
-}
-
static int ep93xx_keypad_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct ep93xx_keypad *keypad;
- const struct matrix_keymap_data *keymap_data;
struct input_dev *input_dev;
int err;
@@ -238,14 +215,6 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
if (!keypad)
return -ENOMEM;
- keypad->pdata = dev_get_platdata(&pdev->dev);
- if (!keypad->pdata)
- return -EINVAL;
-
- keymap_data = keypad->pdata->keymap_data;
- if (!keymap_data)
- return -EINVAL;
-
keypad->irq = platform_get_irq(pdev, 0);
if (keypad->irq < 0)
return keypad->irq;
@@ -254,19 +223,13 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
if (IS_ERR(keypad->mmio_base))
return PTR_ERR(keypad->mmio_base);
- err = ep93xx_keypad_acquire_gpio(pdev);
- if (err)
- return err;
-
- err = devm_add_action_or_reset(&pdev->dev,
- ep93xx_keypad_release_gpio_action, pdev);
- if (err)
- return err;
-
keypad->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(keypad->clk))
return PTR_ERR(keypad->clk);
+ device_property_read_u32(dev, "debounce-delay-ms", &keypad->debounce);
+ device_property_read_u16(dev, "cirrus,prescale", &keypad->prescale);
+
input_dev = devm_input_allocate_device(&pdev->dev);
if (!input_dev)
return -ENOMEM;
@@ -278,13 +241,13 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
input_dev->open = ep93xx_keypad_open;
input_dev->close = ep93xx_keypad_close;
- err = matrix_keypad_build_keymap(keymap_data, NULL,
+ err = matrix_keypad_build_keymap(NULL, NULL,
EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS,
keypad->keycodes, input_dev);
if (err)
return err;
- if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
+ if (device_property_read_bool(&pdev->dev, "autorepeat"))
__set_bit(EV_REP, input_dev->evbit);
input_set_drvdata(input_dev, keypad);
@@ -313,10 +276,17 @@ static void ep93xx_keypad_remove(struct platform_device *pdev)
dev_pm_clear_wake_irq(&pdev->dev);
}
+static const struct of_device_id ep93xx_keypad_of_ids[] = {
+ { .compatible = "cirrus,ep9307-keypad" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ep93xx_keypad_of_ids);
+
static struct platform_driver ep93xx_keypad_driver = {
.driver = {
.name = "ep93xx-keypad",
.pm = pm_sleep_ptr(&ep93xx_keypad_pm_ops),
+ .of_match_table = ep93xx_keypad_of_ids,
},
.probe = ep93xx_keypad_probe,
.remove_new = ep93xx_keypad_remove,
diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h
index fc35be3af723..ea2b2c1074e4 100644
--- a/include/linux/soc/cirrus/ep93xx.h
+++ b/include/linux/soc/cirrus/ep93xx.h
@@ -41,8 +41,6 @@ int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
void ep93xx_pwm_release_gpio(struct platform_device *pdev);
int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
void ep93xx_ide_release_gpio(struct platform_device *pdev);
-int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
-void ep93xx_keypad_release_gpio(struct platform_device *pdev);
int ep93xx_i2s_acquire(void);
void ep93xx_i2s_release(void);
unsigned int ep93xx_chip_revision(void);
@@ -52,8 +50,6 @@ static inline int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) { return
static inline void ep93xx_pwm_release_gpio(struct platform_device *pdev) {}
static inline int ep93xx_ide_acquire_gpio(struct platform_device *pdev) { return 0; }
static inline void ep93xx_ide_release_gpio(struct platform_device *pdev) {}
-static inline int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) { return 0; }
-static inline void ep93xx_keypad_release_gpio(struct platform_device *pdev) {}
static inline int ep93xx_i2s_acquire(void) { return 0; }
static inline void ep93xx_i2s_release(void) {}
static inline unsigned int ep93xx_chip_revision(void) { return 0; }
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 25/40] dt-bindings: wdt: Add ts72xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (23 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 24/40] input: keypad: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 15:03 ` Guenter Roeck
2023-12-12 8:20 ` [PATCH v6 26/40] wdt: ts72xx: add DT support for ts72xx Nikita Shubin via B4 Relay
` (16 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Nikita Shubin
Cc: linux-watchdog, devicetree, linux-kernel, Arnd Bergmann,
Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add DT binding for Technologic Systems TS-72xx watchdog.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../bindings/watchdog/technologic,ts7200-wdt.yaml | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/technologic,ts7200-wdt.yaml b/Documentation/devicetree/bindings/watchdog/technologic,ts7200-wdt.yaml
new file mode 100644
index 000000000000..7e4bfef152f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/technologic,ts7200-wdt.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/technologic,ts7200-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Technologic Systems TS-72xx based SBCs watchdog
+
+maintainers:
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: technologic,ts7200-wdt
+ - items:
+ - enum:
+ - technologic,ts7300-wdt
+ - technologic,ts7260-wdt
+ - technologic,ts7250-wdt
+ - const: technologic,ts7200-wdt
+
+ reg:
+ items:
+ - description: control register
+ - description: feed register
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@23800000 {
+ compatible = "technologic,ts7200-wdt";
+ reg = <0x23800000 0x01>, <0x23c00000 0x01>;
+ timeout-sec = <30>;
+ };
+
+...
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 26/40] wdt: ts72xx: add DT support for ts72xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (24 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 25/40] dt-bindings: wdt: Add ts72xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 18:10 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 27/40] gpio: ep93xx: add DT support for gpio-ep93xx Nikita Shubin via B4 Relay
` (15 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck
Cc: linux-watchdog, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add OF ID match table.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/watchdog/ts72xx_wdt.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c
index 3d57670befe1..ac709dc31a65 100644
--- a/drivers/watchdog/ts72xx_wdt.c
+++ b/drivers/watchdog/ts72xx_wdt.c
@@ -12,6 +12,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/watchdog.h>
#include <linux/io.h>
@@ -160,10 +161,17 @@ static int ts72xx_wdt_probe(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id ts72xx_wdt_of_ids[] = {
+ { .compatible = "technologic,ts7200-wdt" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ts72xx_wdt_of_ids);
+
static struct platform_driver ts72xx_wdt_driver = {
.probe = ts72xx_wdt_probe,
.driver = {
.name = "ts72xx-wdt",
+ .of_match_table = ts72xx_wdt_of_ids,
},
};
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 27/40] gpio: ep93xx: add DT support for gpio-ep93xx
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (25 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 26/40] wdt: ts72xx: add DT support for ts72xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 28/40] ASoC: dt-bindings: ep93xx: Document DMA support Nikita Shubin via B4 Relay
` (14 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski, Andy Shevchenko
Cc: linux-gpio, linux-kernel, Arnd Bergmann, Andy Shevchenko,
Bartosz Golaszewski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add OF ID match table.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/gpio/gpio-ep93xx.c | 38 +++++++++++++++++++++++---------------
1 file changed, 23 insertions(+), 15 deletions(-)
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index a55f635585f4..ab798c848215 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -12,13 +12,13 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/gpio/driver.h>
#include <linux/bitops.h>
#include <linux/seq_file.h>
-#include <linux/interrupt.h>
struct ep93xx_gpio_irq_chip {
void __iomem *base;
@@ -138,7 +138,8 @@ static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
- int port_mask = BIT(irqd_to_hwirq(d));
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ int port_mask = BIT(hwirq);
if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH)
eic->int_type2 ^= port_mask; /* switch edge direction */
@@ -147,26 +148,28 @@ static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
ep93xx_gpio_update_int_params(eic);
writeb(port_mask, eic->base + EP93XX_INT_EOI_OFFSET);
- gpiochip_disable_irq(gc, irqd_to_hwirq(d));
+ gpiochip_disable_irq(gc, hwirq);
}
static void ep93xx_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
- eic->int_unmasked &= ~BIT(irqd_to_hwirq(d));
+ eic->int_unmasked &= ~BIT(hwirq);
ep93xx_gpio_update_int_params(eic);
- gpiochip_disable_irq(gc, irqd_to_hwirq(d));
+ gpiochip_disable_irq(gc, hwirq);
}
static void ep93xx_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
- gpiochip_enable_irq(gc, irqd_to_hwirq(d));
- eic->int_unmasked |= BIT(irqd_to_hwirq(d));
+ gpiochip_enable_irq(gc, hwirq);
+ eic->int_unmasked |= BIT(hwirq);
ep93xx_gpio_update_int_params(eic);
}
@@ -179,11 +182,11 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc);
- irq_hw_number_t offset = irqd_to_hwirq(d);
- int port_mask = BIT(offset);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ int port_mask = BIT(hwirq);
irq_flow_handler_t handler;
- gc->direction_input(gc, offset);
+ gc->direction_input(gc, hwirq);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
@@ -209,7 +212,7 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
case IRQ_TYPE_EDGE_BOTH:
eic->int_type1 |= port_mask;
/* set initial polarity based on current input level */
- if (gc->get(gc, offset))
+ if (gc->get(gc, hwirq))
eic->int_type2 &= ~port_mask; /* falling */
else
eic->int_type2 |= port_mask; /* rising */
@@ -285,9 +288,8 @@ static int ep93xx_setup_irqs(struct platform_device *pdev,
if (girq->num_parents == 0)
return -EINVAL;
- girq->parents = devm_kcalloc(dev, girq->num_parents,
- sizeof(*girq->parents),
- GFP_KERNEL);
+ girq->parents = devm_kcalloc(dev, girq->num_parents, sizeof(*girq->parents),
+ GFP_KERNEL);
if (!girq->parents)
return -ENOMEM;
@@ -306,7 +308,7 @@ static int ep93xx_setup_irqs(struct platform_device *pdev,
girq->parent_handler = ep93xx_gpio_f_irq_handler;
for (i = 0; i < girq->num_parents; i++) {
- irq = platform_get_irq(pdev, i);
+ irq = platform_get_irq_optional(pdev, i);
if (irq < 0)
continue;
@@ -359,9 +361,15 @@ static int ep93xx_gpio_probe(struct platform_device *pdev)
return devm_gpiochip_add_data(&pdev->dev, gc, egc);
}
+static const struct of_device_id ep93xx_gpio_match[] = {
+ { .compatible = "cirrus,ep9301-gpio" },
+ { /* sentinel */ }
+};
+
static struct platform_driver ep93xx_gpio_driver = {
.driver = {
.name = "gpio-ep93xx",
+ .of_match_table = ep93xx_gpio_match,
},
.probe = ep93xx_gpio_probe,
};
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 28/40] ASoC: dt-bindings: ep93xx: Document DMA support
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (26 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 27/40] gpio: ep93xx: add DT support for gpio-ep93xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 29/40] ASoC: dt-bindings: ep93xx: Document Audio Port support Nikita Shubin via B4 Relay
` (13 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, Alexander Sverdlin, Liam Girdwood, Mark Brown,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, linux-sound, devicetree, linux-kernel,
Arnd Bergmann, Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Document DMA support in binding document.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
.../devicetree/bindings/sound/cirrus,ep9301-i2s.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
index 453d493c941f..36a320ddf534 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
@@ -40,6 +40,16 @@ properties:
- const: sclk
- const: lrclk
+ dmas:
+ items:
+ - description: out DMA channel
+ - description: in DMA channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
required:
- compatible
- '#sound-dai-cells'
@@ -61,6 +71,8 @@ examples:
<&syscon 30>,
<&syscon 31>;
clock-names = "mclk", "sclk", "lrclk";
+ dmas = <&dma0 0 1>, <&dma0 0 2>;
+ dma-names = "tx", "rx";
};
...
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 29/40] ASoC: dt-bindings: ep93xx: Document Audio Port support
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (27 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 28/40] ASoC: dt-bindings: ep93xx: Document DMA support Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 30/40] ASoC: ep93xx: Drop legacy DMA support Nikita Shubin via B4 Relay
` (12 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, Alexander Sverdlin, Liam Girdwood, Mark Brown,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-kernel, linux-sound, devicetree, linux-kernel,
Arnd Bergmann, Krzysztof Kozlowski
From: Nikita Shubin <nikita.shubin@maquefel.me>
Document Audio Graph Port support in binding document.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
index 36a320ddf534..4693e85aed37 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
@@ -50,6 +50,10 @@ properties:
- const: tx
- const: rx
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
required:
- compatible
- '#sound-dai-cells'
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 30/40] ASoC: ep93xx: Drop legacy DMA support
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (28 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 29/40] ASoC: dt-bindings: ep93xx: Document Audio Port support Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 31/40] ARM: dts: add Cirrus EP93XX SoC .dtsi Nikita Shubin via B4 Relay
` (11 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai,
Alexander Sverdlin, Kuninori Morimoto, Nicolas Ferre,
Uwe Kleine-König, Nikita Shubin
Cc: linux-sound, linux-kernel, Arnd Bergmann
From: Alexander Sverdlin <alexander.sverdlin@gmail.com>
And rely on OF DMA.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
sound/soc/cirrus/ep93xx-i2s.c | 19 -------------------
sound/soc/cirrus/ep93xx-pcm.c | 19 +------------------
2 files changed, 1 insertion(+), 37 deletions(-)
diff --git a/sound/soc/cirrus/ep93xx-i2s.c b/sound/soc/cirrus/ep93xx-i2s.c
index 522de4b80293..9e83cdf8a943 100644
--- a/sound/soc/cirrus/ep93xx-i2s.c
+++ b/sound/soc/cirrus/ep93xx-i2s.c
@@ -24,7 +24,6 @@
#include <sound/initval.h>
#include <sound/soc.h>
-#include <linux/platform_data/dma-ep93xx.h>
#include <linux/soc/cirrus/ep93xx.h>
#include "ep93xx-pcm.h"
@@ -80,19 +79,6 @@ struct ep93xx_i2s_info {
struct snd_dmaengine_dai_dma_data dma_params_tx;
};
-static struct ep93xx_dma_data ep93xx_i2s_dma_data[] = {
- [SNDRV_PCM_STREAM_PLAYBACK] = {
- .name = "i2s-pcm-out",
- .port = EP93XX_DMA_I2S1,
- .direction = DMA_MEM_TO_DEV,
- },
- [SNDRV_PCM_STREAM_CAPTURE] = {
- .name = "i2s-pcm-in",
- .port = EP93XX_DMA_I2S1,
- .direction = DMA_DEV_TO_MEM,
- },
-};
-
static inline void ep93xx_i2s_write_reg(struct ep93xx_i2s_info *info,
unsigned reg, unsigned val)
{
@@ -198,11 +184,6 @@ static int ep93xx_i2s_dai_probe(struct snd_soc_dai *dai)
{
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
- info->dma_params_tx.filter_data =
- &ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_PLAYBACK];
- info->dma_params_rx.filter_data =
- &ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_CAPTURE];
-
snd_soc_dai_init_dma_data(dai, &info->dma_params_tx,
&info->dma_params_rx);
diff --git a/sound/soc/cirrus/ep93xx-pcm.c b/sound/soc/cirrus/ep93xx-pcm.c
index fa72acd8d334..5ecb4671cbba 100644
--- a/sound/soc/cirrus/ep93xx-pcm.c
+++ b/sound/soc/cirrus/ep93xx-pcm.c
@@ -18,8 +18,6 @@
#include <sound/soc.h>
#include <sound/dmaengine_pcm.h>
-#include <linux/platform_data/dma-ep93xx.h>
-
#include "ep93xx-pcm.h"
static const struct snd_pcm_hardware ep93xx_pcm_hardware = {
@@ -35,30 +33,15 @@ static const struct snd_pcm_hardware ep93xx_pcm_hardware = {
.fifo_size = 32,
};
-static bool ep93xx_pcm_dma_filter(struct dma_chan *chan, void *filter_param)
-{
- struct ep93xx_dma_data *data = filter_param;
-
- if (data->direction == ep93xx_dma_chan_direction(chan)) {
- chan->private = data;
- return true;
- }
-
- return false;
-}
-
static const struct snd_dmaengine_pcm_config ep93xx_dmaengine_pcm_config = {
.pcm_hardware = &ep93xx_pcm_hardware,
- .compat_filter_fn = ep93xx_pcm_dma_filter,
.prealloc_buffer_size = 131072,
};
int devm_ep93xx_pcm_platform_register(struct device *dev)
{
return devm_snd_dmaengine_pcm_register(dev,
- &ep93xx_dmaengine_pcm_config,
- SND_DMAENGINE_PCM_FLAG_NO_DT |
- SND_DMAENGINE_PCM_FLAG_COMPAT);
+ &ep93xx_dmaengine_pcm_config, 0);
}
EXPORT_SYMBOL_GPL(devm_ep93xx_pcm_platform_register);
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 31/40] ARM: dts: add Cirrus EP93XX SoC .dtsi
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (29 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 30/40] ASoC: ep93xx: Drop legacy DMA support Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 32/40] ARM: dts: ep93xx: add ts7250 board Nikita Shubin via B4 Relay
` (10 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Nikita Shubin,
Alexander Sverdlin
Cc: devicetree, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add support for Cirrus Logic EP93XX SoC's family.
Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/boot/dts/cirrus/ep93xx.dtsi | 441 +++++++++++++++++++++++++++++++++++
1 file changed, 441 insertions(+)
diff --git a/arch/arm/boot/dts/cirrus/ep93xx.dtsi b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
new file mode 100644
index 000000000000..e6ced628f570
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cirrus Logic systems EP93XX SoC
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+/ {
+ soc: soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ syscon: syscon@80930000 {
+ compatible = "cirrus,ep9301-syscon", "syscon";
+ reg = <0x80930000 0x1000>;
+
+ #clock-cells = <1>;
+ clocks = <&xtali>;
+
+ spi_default_pins: pins-spi {
+ function = "spi";
+ groups = "ssp";
+ };
+
+ ac97_default_pins: pins-ac97 {
+ function = "ac97";
+ groups = "ac97";
+ };
+
+ i2s_on_ssp_pins: pins-i2sonssp {
+ function = "i2s";
+ groups = "i2s_on_ssp";
+ };
+
+ i2s_on_ac97_pins: pins-i2sonac97 {
+ function = "i2s";
+ groups = "i2s_on_ac97";
+ };
+
+ gpio1_default_pins: pins-gpio1 {
+ function = "gpio";
+ groups = "gpio1agrp";
+ };
+
+ pwm1_default_pins: pins-pwm1 {
+ function = "pwm";
+ groups = "pwm1";
+ };
+
+ gpio2_default_pins: pins-gpio2 {
+ function = "gpio";
+ groups = "gpio2agrp";
+ };
+
+ gpio3_default_pins: pins-gpio3 {
+ function = "gpio";
+ groups = "gpio3agrp";
+ };
+
+ keypad_default_pins: pins-keypad {
+ function = "keypad";
+ groups = "keypadgrp";
+ };
+
+ gpio4_default_pins: pins-gpio4 {
+ function = "gpio";
+ groups = "gpio4agrp";
+ };
+
+ gpio6_default_pins: pins-gpio6 {
+ function = "gpio";
+ groups = "gpio6agrp";
+ };
+
+ gpio7_default_pins: pins-gpio7 {
+ function = "gpio";
+ groups = "gpio7agrp";
+ };
+
+ ide_default_pins: pins-ide {
+ function = "pata";
+ groups = "idegrp";
+ };
+
+ lcd_on_dram0_pins: pins-rasteronsdram0 {
+ function = "lcd";
+ groups = "rasteronsdram0grp";
+ };
+
+ lcd_on_dram3_pins: pins-rasteronsdram3 {
+ function = "lcd";
+ groups = "rasteronsdram3grp";
+ };
+ };
+
+ adc: adc@80900000 {
+ compatible = "cirrus,ep9301-adc";
+ reg = <0x80900000 0x28>;
+ clocks = <&syscon EP93XX_CLK_ADC>;
+ interrupt-parent = <&vic0>;
+ interrupts = <30>;
+ status = "disabled";
+ };
+
+ /*
+ * The EP93XX expansion bus is a set of up to 7 each up to 16MB
+ * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+ * But since we don't require to setup it in any way, we can
+ * represent it as a simple-bus.
+ */
+ ebi: bus@80080000 {
+ compatible = "simple-bus";
+ reg = <0x80080000 0x20>;
+ native-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
+ dma0: dma-controller@80000000 {
+ compatible = "cirrus,ep9301-dma-m2p";
+ reg = <0x80000000 0x0040>,
+ <0x80000040 0x0040>,
+ <0x80000080 0x0040>,
+ <0x800000c0 0x0040>,
+ <0x80000240 0x0040>,
+ <0x80000200 0x0040>,
+ <0x800002c0 0x0040>,
+ <0x80000280 0x0040>,
+ <0x80000340 0x0040>,
+ <0x80000300 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2P0>,
+ <&syscon EP93XX_CLK_M2P1>,
+ <&syscon EP93XX_CLK_M2P2>,
+ <&syscon EP93XX_CLK_M2P3>,
+ <&syscon EP93XX_CLK_M2P4>,
+ <&syscon EP93XX_CLK_M2P5>,
+ <&syscon EP93XX_CLK_M2P6>,
+ <&syscon EP93XX_CLK_M2P7>,
+ <&syscon EP93XX_CLK_M2P8>,
+ <&syscon EP93XX_CLK_M2P9>;
+ clock-names = "m2p0", "m2p1",
+ "m2p2", "m2p3",
+ "m2p4", "m2p5",
+ "m2p6", "m2p7",
+ "m2p8", "m2p9";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>, <8>, <9>, <10>, <11>,
+ <12>, <13>, <14>, <15>, <16>;
+ #dma-cells = <2>;
+ };
+
+ dma1: dma-controller@80000100 {
+ compatible = "cirrus,ep9301-dma-m2m";
+ reg = <0x80000100 0x0040>,
+ <0x80000140 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2M0>,
+ <&syscon EP93XX_CLK_M2M1>;
+ clock-names = "m2m0", "m2m1";
+ interrupt-parent = <&vic0>;
+ interrupts = <17>, <18>;
+ #dma-cells = <2>;
+ };
+
+ eth0: ethernet@80010000 {
+ compatible = "cirrus,ep9301-eth";
+ reg = <0x80010000 0x10000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <7>;
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gpio0: gpio@80840000 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840000 0x04>,
+ <0x80840010 0x04>,
+ <0x80840090 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ };
+
+ gpio1: gpio@80840004 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840004 0x04>,
+ <0x80840014 0x04>,
+ <0x808400ac 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ };
+
+ gpio2: gpio@80840008 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840008 0x04>,
+ <0x80840018 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_default_pins>;
+ };
+
+ gpio3: gpio@8084000c {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x8084000c 0x04>,
+ <0x8084001c 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio3_default_pins>;
+ };
+
+ gpio4: gpio@80840020 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840020 0x04>,
+ <0x80840024 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio4_default_pins>;
+ };
+
+ gpio5: gpio@80840030 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840030 0x04>,
+ <0x80840034 0x04>,
+ <0x8084004c 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupts-extended = <&vic0 19>, <&vic0 20>,
+ <&vic0 21>, <&vic0 22>,
+ <&vic1 15>, <&vic1 16>,
+ <&vic1 17>, <&vic1 18>;
+ };
+
+ gpio6: gpio@80840038 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840038 0x04>,
+ <0x8084003c 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio6_default_pins>;
+ };
+
+ gpio7: gpio@80840040 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840040 0x04>,
+ <0x80840044 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio7_default_pins>;
+ };
+
+ i2s: i2s@80820000 {
+ compatible = "cirrus,ep9301-i2s";
+ reg = <0x80820000 0x100>;
+ #sound-dai-cells = <0>;
+ interrupt-parent = <&vic1>;
+ interrupts = <28>;
+ clocks = <&syscon EP93XX_CLK_I2S_MCLK>,
+ <&syscon EP93XX_CLK_I2S_SCLK>,
+ <&syscon EP93XX_CLK_I2S_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ dmas = <&dma0 0 1>, <&dma0 0 2>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ ide: ide@800a0000 {
+ compatible = "cirrus,ep9312-pata";
+ reg = <0x800a0000 0x38>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ide_default_pins>;
+ status = "disabled";
+ };
+
+ vic0: interrupt-controller@800b0000 {
+ compatible = "arm,pl192-vic";
+ reg = <0x800b0000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0x7ffffffc>;
+ valid-wakeup-mask = <0x0>;
+ };
+
+ vic1: interrupt-controller@800c0000 {
+ compatible = "arm,pl192-vic";
+ reg = <0x800c0000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0x1fffffff>;
+ valid-wakeup-mask = <0x0>;
+ };
+
+ keypad: keypad@800f0000 {
+ compatible = "cirrus,ep9307-keypad";
+ reg = <0x800f0000 0x0c>;
+ interrupt-parent = <&vic0>;
+ interrupts = <29>;
+ clocks = <&syscon EP93XX_CLK_KEYPAD>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_default_pins>;
+ linux,keymap = <KEY_UP>,
+ <KEY_DOWN>,
+ <KEY_VOLUMEDOWN>,
+ <KEY_HOME>,
+ <KEY_RIGHT>,
+ <KEY_LEFT>,
+ <KEY_ENTER>,
+ <KEY_VOLUMEUP>,
+ <KEY_F6>,
+ <KEY_F8>,
+ <KEY_F9>,
+ <KEY_F10>,
+ <KEY_F1>,
+ <KEY_F2>,
+ <KEY_F3>,
+ <KEY_POWER>;
+ };
+
+ pwm0: pwm@80910000 {
+ compatible = "cirrus,ep9301-pwm";
+ reg = <0x80910000 0x10>;
+ clocks = <&syscon EP93XX_CLK_PWM>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@80910020 {
+ compatible = "cirrus,ep9301-pwm";
+ reg = <0x80910020 0x10>;
+ clocks = <&syscon EP93XX_CLK_PWM>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_default_pins>;
+ status = "disabled";
+ };
+
+ rtc0: rtc@80920000 {
+ compatible = "cirrus,ep9301-rtc";
+ reg = <0x80920000 0x100>;
+ };
+
+ spi0: spi@808a0000 {
+ compatible = "cirrus,ep9301-spi";
+ reg = <0x808a0000 0x18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&vic1>;
+ interrupts = <21>;
+ clocks = <&syscon EP93XX_CLK_SPI>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_default_pins>;
+ status = "disabled";
+ };
+
+ timer: timer@80810000 {
+ compatible = "cirrus,ep9301-timer";
+ reg = <0x80810000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <19>;
+ };
+
+ uart0: serial@808c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x808c0000 0x1000>;
+ arm,primecell-periphid = <0x00041010>;
+ clocks = <&syscon EP93XX_CLK_UART1>, <&syscon EP93XX_CLK_UART>;
+ clock-names = "uartclk", "apb_pclk";
+ interrupt-parent = <&vic1>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ uart1: uart@808d0000 {
+ compatible = "arm,primecell";
+ reg = <0x808d0000 0x1000>;
+ arm,primecell-periphid = <0x00041010>;
+ clocks = <&syscon EP93XX_CLK_UART2>, <&syscon EP93XX_CLK_UART>;
+ clock-names = "apb:uart2", "apb_pclk";
+ interrupt-parent = <&vic1>;
+ interrupts = <22>;
+ status = "disabled";
+ };
+
+ uart2: uart@808b0000 {
+ compatible = "arm,primecell";
+ reg = <0x808b0000 0x1000>;
+ arm,primecell-periphid = <0x00041010>;
+ clocks = <&syscon EP93XX_CLK_UART3>, <&syscon EP93XX_CLK_UART>;
+ clock-names = "apb:uart3", "apb_pclk";
+ interrupt-parent = <&vic1>;
+ interrupts = <23>;
+ status = "disabled";
+ };
+
+ usb0: usb@80020000 {
+ compatible = "generic-ohci";
+ reg = <0x80020000 0x10000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <24>;
+ clocks = <&syscon EP93XX_CLK_USB>;
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@80940000 {
+ compatible = "cirrus,ep9301-wdt";
+ reg = <0x80940000 0x08>;
+ };
+ };
+
+ xtali: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <14745600>;
+ clock-output-names = "xtali";
+ };
+};
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 32/40] ARM: dts: ep93xx: add ts7250 board
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (30 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 31/40] ARM: dts: add Cirrus EP93XX SoC .dtsi Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 33/40] ARM: dts: ep93xx: Add EDB9302 DT Nikita Shubin via B4 Relay
` (9 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Nikita Shubin,
Andre Przywara, Kunihiko Hayashi, Michal Simek, Jesper Nilsson,
Alexander Sverdlin
Cc: Rob Herring, Sudeep Holla, Krzysztof Kozlowski, devicetree,
linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add device tree file for Technologic Systems ts7250 board and
Liebherr bk3 board which have many in common, both are based on
ep9302 SoC variant.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/boot/dts/cirrus/Makefile | 3 +
arch/arm/boot/dts/cirrus/ep93xx-bk3.dts | 126 +++++++++++++++++++++++++
arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts | 145 +++++++++++++++++++++++++++++
3 files changed, 274 insertions(+)
diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile
index e944d3e2129d..211a7e2f2115 100644
--- a/arch/arm/boot/dts/cirrus/Makefile
+++ b/arch/arm/boot/dts/cirrus/Makefile
@@ -3,3 +3,6 @@ dtb-$(CONFIG_ARCH_CLPS711X) += \
ep7211-edb7211.dtb
dtb-$(CONFIG_ARCH_CLPS711X) += \
ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_EP93XX) += \
+ ep93xx-bk3.dtb \
+ ep93xx-ts7250.dtb
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
new file mode 100644
index 000000000000..5409a700cdfe
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Liebherr controller BK3.1 based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+ model = "Liebherr controller BK3.1";
+ compatible = "liebherr,bk3", "cirrus,ep9301";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* should be set from ATAGS */
+ reg = <0x00000000 0x02000000>,
+ <0x000530c0 0x01fdd000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ label = "grled";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ };
+
+ led-1 {
+ label = "rdled";
+ gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_FAULT;
+ };
+ };
+};
+
+&ebi {
+ nand-controller@60000000 {
+ compatible = "technologic,ts7200-nand";
+ reg = <0x60000000 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "System";
+ reg = <0x00000000 0x01e00000>;
+ read-only;
+ };
+
+ partition@1e00000 {
+ label = "Data";
+ reg = <0x01e00000 0x05f20000>;
+ };
+
+ partition@7d20000 {
+ label = "RedBoot";
+ reg = <0x07d20000 0x002e0000>;
+ read-only;
+ };
+ };
+ };
+ };
+};
+
+ð0 {
+ phy-handle = <&phy0>;
+};
+
+&i2s {
+ dmas = <&dma0 0 1>, <&dma0 0 2>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_on_ac97_pins>;
+ status = "okay";
+};
+
+&gpio1 {
+ /* PWM */
+ gpio-ranges = <&syscon 6 163 1>;
+};
+
+&gpio4 {
+ gpio-ranges = <&syscon 0 97 2>;
+ status = "okay";
+};
+
+&gpio6 {
+ gpio-ranges = <&syscon 0 87 2>;
+ status = "okay";
+};
+
+&gpio7 {
+ gpio-ranges = <&syscon 2 199 4>;
+ status = "okay";
+};
+
+&mdio0 {
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
new file mode 100644
index 000000000000..9e03f93d9fc8
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Technologic Systems ts7250 board based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+ compatible = "technologic,ts7250", "cirrus,ep9301";
+ model = "TS-7250 SBC";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* should be set from ATAGS */
+ reg = <0x00000000 0x02000000>,
+ <0x000530c0 0x01fdd000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ label = "grled";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ };
+
+ led-1 {
+ label = "rdled";
+ gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_FAULT;
+ };
+ };
+};
+
+&ebi {
+ nand-controller@60000000 {
+ compatible = "technologic,ts7200-nand";
+ reg = <0x60000000 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "TS-BOOTROM";
+ reg = <0x00000000 0x00020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "Linux";
+ reg = <0x00020000 0x07d00000>;
+ };
+
+ partition@7d20000 {
+ label = "RedBoot";
+ reg = <0x07d20000 0x002e0000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ rtc@10800000 {
+ compatible = "st,m48t86";
+ reg = <0x10800000 0x1>,
+ <0x11700000 0x1>;
+ };
+
+ watchdog@23800000 {
+ compatible = "technologic,ts7200-wdt";
+ reg = <0x23800000 0x01>,
+ <0x23c00000 0x01>;
+ timeout-sec = <30>;
+ };
+};
+
+ð0 {
+ phy-handle = <&phy0>;
+};
+
+&gpio1 {
+ /* PWM */
+ gpio-ranges = <&syscon 6 163 1>;
+};
+
+/* ts7250 doesn't have GPIO Port D present */
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio6 {
+ gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+ gpio-ranges = <&syscon 2 199 4>;
+};
+
+&spi0 {
+ cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ dmas = <&dma1 10 2>, <&dma1 10 1>;
+ dma-names = "rx", "tx";
+ status = "okay";
+
+ tmp122: temperature-sensor@0 {
+ compatible = "ti,tmp122";
+ reg = <0>;
+ spi-max-frequency = <2000000>;
+ };
+};
+
+&mdio0 {
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 33/40] ARM: dts: ep93xx: Add EDB9302 DT
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (31 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 32/40] ARM: dts: ep93xx: add ts7250 board Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 34/40] ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms Nikita Shubin via B4 Relay
` (8 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Andre Przywara,
Nikita Shubin, Kunihiko Hayashi, Neil Armstrong,
Enric Balletbo i Serra, Alexander Sverdlin
Cc: Baruch Siach, Linus Walleij, Claudiu Beznea, Rob Herring,
devicetree, linux-kernel, Arnd Bergmann
From: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Add device tree for Cirrus EDB9302.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/boot/dts/cirrus/Makefile | 1 +
arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts | 182 ++++++++++++++++++++++++++++
2 files changed, 183 insertions(+)
diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile
index 211a7e2f2115..e6015983e464 100644
--- a/arch/arm/boot/dts/cirrus/Makefile
+++ b/arch/arm/boot/dts/cirrus/Makefile
@@ -4,5 +4,6 @@ dtb-$(CONFIG_ARCH_CLPS711X) += \
dtb-$(CONFIG_ARCH_CLPS711X) += \
ep7211-edb7211.dtb
dtb-$(CONFIG_ARCH_EP93XX) += \
+ ep93xx-edb9302.dtb \
ep93xx-bk3.dtb \
ep93xx-ts7250.dtb
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
new file mode 100644
index 000000000000..f015c6b8c802
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Device Tree file for Cirrus Logic EDB9302 board based on EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cirrus,edb9302", "cirrus,ep9301";
+ model = "cirrus,edb9302";
+
+ chosen {
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* should be set from ATAGS */
+ reg = <0x0000000 0x800000>,
+ <0x1000000 0x800000>,
+ <0x4000000 0x800000>,
+ <0x5000000 0x800000>;
+ };
+
+ sound {
+ compatible = "audio-graph-card2";
+ label = "EDB93XX";
+ links = <&i2s_port>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ label = "grled";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ };
+
+ led-1 {
+ label = "rdled";
+ gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_FAULT;
+ };
+ };
+};
+
+&adc {
+ status = "okay";
+};
+
+&ebi {
+ flash@60000000 {
+ compatible = "cfi-flash";
+ reg = <0x60000000 0x1000000>;
+ bank-width = <2>;
+ };
+};
+
+ð0 {
+ phy-handle = <&phy0>;
+};
+
+&gpio0 {
+ gpio-ranges = <&syscon 0 153 1>,
+ <&syscon 1 152 1>,
+ <&syscon 2 151 1>,
+ <&syscon 3 148 1>,
+ <&syscon 4 147 1>,
+ <&syscon 5 146 1>,
+ <&syscon 6 145 1>,
+ <&syscon 7 144 1>;
+};
+
+&gpio1 {
+ gpio-ranges = <&syscon 0 143 1>,
+ <&syscon 1 142 1>,
+ <&syscon 2 141 1>,
+ <&syscon 3 140 1>,
+ <&syscon 4 165 1>,
+ <&syscon 5 164 1>,
+ <&syscon 6 163 1>,
+ <&syscon 7 160 1>;
+};
+
+&gpio2 {
+ gpio-ranges = <&syscon 0 115 1>;
+};
+
+/* edb9302 doesn't have GPIO Port D present */
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio5 {
+ gpio-ranges = <&syscon 1 170 1>,
+ <&syscon 2 169 1>,
+ <&syscon 3 168 1>;
+};
+
+&gpio6 {
+ gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+ gpio-ranges = <&syscon 2 199 4>;
+};
+
+&i2s {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_on_ac97_pins>;
+ status = "okay";
+ i2s_port: port {
+ i2s_ep: endpoint {
+ system-clock-direction-out;
+ frame-master;
+ bitclock-master;
+ mclk-fs = <256>;
+ dai-format = "i2s";
+ convert-channels = <2>;
+ convert-sample-format = "s32_le";
+ remote-endpoint = <&codec_ep>;
+ };
+ };
+};
+
+&mdio0 {
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&spi0 {
+ cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW
+ &gpio0 7 GPIO_ACTIVE_LOW>;
+ dmas = <&dma1 10 2>, <&dma1 10 1>;
+ dma-names = "rx", "tx";
+ status = "okay";
+
+ cs4271: codec@0 {
+ compatible = "cirrus,cs4271";
+ reg = <0>;
+ #sound-dai-cells = <0>;
+ spi-max-frequency = <6000000>;
+ spi-cpol;
+ spi-cpha;
+ reset-gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ port {
+ codec_ep: endpoint {
+ remote-endpoint = <&i2s_ep>;
+ };
+ };
+ };
+
+ at25f1024: eeprom@1 {
+ compatible = "atmel,at25";
+ reg = <1>;
+ address-width = <8>;
+ size = <0x20000>;
+ pagesize = <256>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 34/40] ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (32 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 33/40] ARM: dts: ep93xx: Add EDB9302 DT Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 35/40] pwm: ep93xx: drop legacy pinctrl Nikita Shubin via B4 Relay
` (7 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Russell King, Hartley Sweeten, Alexander Sverdlin, Arnd Bergmann,
Russell King (Oracle),
Masahiro Yamada, Linus Walleij, Heiko Stuebner, Neil Armstrong,
Nathan Chancellor, Nikita Shubin, Nicolas Saenz Julienne
Cc: Krzysztof Hałasa, Krzysztof Kozlowski, linux-arm-kernel,
linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Add compulsory device tree support to the Cirrus ep93xx ARMv4 platform.
- select PINCTRL_EP93xx
- select COMMON_CLK_EP93XX, as clock driver moved out of platform code
- select ARCH_HAS_RESET_CONTROLLER
Select ARM_ATAG_DTB_COMPAT to update device tree with information
about memory passed from bootloader.
We have to leave all MACH options as they are used for board checking
before decomp, to turn off watchdog and ethernet DMA.
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/Makefile | 1 -
arch/arm/mach-ep93xx/Kconfig | 20 ++++++++++----------
arch/arm/mach-ep93xx/Makefile | 11 -----------
3 files changed, 10 insertions(+), 22 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5ba42f69f8ce..82349c2d7b17 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -179,7 +179,6 @@ machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
-machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge
machine-$(CONFIG_ARCH_GEMINI) += gemini
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 703f3d232a60..812b71dcf60e 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -3,27 +3,27 @@ menuconfig ARCH_EP93XX
bool "EP93xx-based"
depends on ATAGS
depends on ARCH_MULTI_V4T
+ # CONFIG_ARCH_MULTI_V7 is not set
depends on CPU_LITTLE_ENDIAN
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_SPARSEMEM_ENABLE
select ARM_AMBA
select ARM_VIC
+ select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+ select ARM_ATAG_DTB_COMPAT # we need this to update dt memory node
+ select COMMON_CLK_EP93XX
+ select EP93XX_TIMER
select CLKSRC_MMIO
select CPU_ARM920T
select GPIOLIB
+ select PINCTRL
+ select PINCTRL_EP93XX
help
This enables support for the Cirrus EP93xx series of CPUs.
if ARCH_EP93XX
-menu "Cirrus EP93xx Implementation Options"
-
-config EP93XX_SOC_COMMON
- bool
- default y
- select SOC_BUS
- select LEDS_GPIO_REGISTER
-
-comment "EP93xx Platforms"
+# menu "EP93xx Platforms"
config MACH_BK3
bool "Support Liebherr BK3.1"
@@ -103,6 +103,6 @@ config MACH_VISION_EP9307
Say 'Y' here if you want your kernel to support the
Vision Engraving Systems EP9307 SoM.
-endmenu
+# endmenu
endif
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
deleted file mode 100644
index 62e37403df14..000000000000
--- a/arch/arm/mach-ep93xx/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-obj-y := core.o clock.o timer-ep93xx.o
-
-obj-$(CONFIG_EP93XX_DMA) += dma.o
-
-obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
-obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
-obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 35/40] pwm: ep93xx: drop legacy pinctrl
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (33 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 34/40] ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use Nikita Shubin via B4 Relay
` (6 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, Alexander Sverdlin, Russell King,
Thierry Reding, Uwe Kleine-König, Nikita Shubin,
Linus Walleij, Sergey Shtylyov, Damien Le Moal, Andy Shevchenko
Cc: Dmitry Torokhov, linux-arm-kernel, linux-kernel, linux-pwm,
Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Drop legacy gpio request/free since we are using
pinctrl for this now.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/mach-ep93xx/core.c | 42 ---------------------------------------
drivers/pwm/pwm-ep93xx.c | 18 -----------------
include/linux/soc/cirrus/ep93xx.h | 4 ----
3 files changed, 64 deletions(-)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b99c46d22c4d..4ddf1a4cba33 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -577,48 +577,6 @@ void __init ep93xx_register_pwm(int pwm0, int pwm1)
platform_device_register(&ep93xx_pwm1_device);
}
-int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
-{
- int err;
-
- if (pdev->id == 0) {
- err = 0;
- } else if (pdev->id == 1) {
- err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
- dev_name(&pdev->dev));
- if (err)
- return err;
- err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
- if (err)
- goto fail;
-
- /* PWM 1 output on EGPIO[14] */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
- } else {
- err = -ENODEV;
- }
-
- return err;
-
-fail:
- gpio_free(EP93XX_GPIO_LINE_EGPIO14);
- return err;
-}
-EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
-
-void ep93xx_pwm_release_gpio(struct platform_device *pdev)
-{
- if (pdev->id == 1) {
- gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
- gpio_free(EP93XX_GPIO_LINE_EGPIO14);
-
- /* EGPIO[14] used for GPIO */
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
- }
-}
-EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
-
-
/*************************************************************************
* EP93xx video peripheral handling
*************************************************************************/
diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c
index 7cf05d0b78fb..0d17dbe10fcf 100644
--- a/drivers/pwm/pwm-ep93xx.c
+++ b/drivers/pwm/pwm-ep93xx.c
@@ -27,8 +27,6 @@
#include <asm/div64.h>
-#include <linux/soc/cirrus/ep93xx.h> /* for ep93xx_pwm_{acquire,release}_gpio() */
-
#define EP93XX_PWMx_TERM_COUNT 0x00
#define EP93XX_PWMx_DUTY_CYCLE 0x04
#define EP93XX_PWMx_ENABLE 0x08
@@ -45,20 +43,6 @@ static inline struct ep93xx_pwm *to_ep93xx_pwm(struct pwm_chip *chip)
return container_of(chip, struct ep93xx_pwm, chip);
}
-static int ep93xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct platform_device *pdev = to_platform_device(chip->dev);
-
- return ep93xx_pwm_acquire_gpio(pdev);
-}
-
-static void ep93xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct platform_device *pdev = to_platform_device(chip->dev);
-
- ep93xx_pwm_release_gpio(pdev);
-}
-
static int ep93xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
@@ -157,8 +141,6 @@ static int ep93xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
}
static const struct pwm_ops ep93xx_pwm_ops = {
- .request = ep93xx_pwm_request,
- .free = ep93xx_pwm_free,
.apply = ep93xx_pwm_apply,
};
diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h
index ea2b2c1074e4..fc4a2f9d4729 100644
--- a/include/linux/soc/cirrus/ep93xx.h
+++ b/include/linux/soc/cirrus/ep93xx.h
@@ -37,8 +37,6 @@ struct ep93xx_regmap_adev {
container_of((_adev), struct ep93xx_regmap_adev, adev)
#ifdef CONFIG_ARCH_EP93XX
-int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
-void ep93xx_pwm_release_gpio(struct platform_device *pdev);
int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
void ep93xx_ide_release_gpio(struct platform_device *pdev);
int ep93xx_i2s_acquire(void);
@@ -46,8 +44,6 @@ void ep93xx_i2s_release(void);
unsigned int ep93xx_chip_revision(void);
#else
-static inline int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) { return 0; }
-static inline void ep93xx_pwm_release_gpio(struct platform_device *pdev) {}
static inline int ep93xx_ide_acquire_gpio(struct platform_device *pdev) { return 0; }
static inline void ep93xx_ide_release_gpio(struct platform_device *pdev) {}
static inline int ep93xx_i2s_acquire(void) { return 0; }
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (34 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 35/40] pwm: ep93xx: drop legacy pinctrl Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 18:16 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 37/40] ARM: ep93xx: delete all boardfiles Nikita Shubin via B4 Relay
` (5 subsequent siblings)
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, Alexander Sverdlin, Russell King,
Sergey Shtylyov, Damien Le Moal, Nikita Shubin, Linus Walleij,
Andy Shevchenko, Dmitry Torokhov
Cc: Uwe Kleine-König, linux-arm-kernel, linux-kernel, linux-ide,
Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Drop legacy acquire/release since we are using pinctrl for this now.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/mach-ep93xx/core.c | 72 ---------------------------------------
drivers/ata/pata_ep93xx.c | 29 +++++-----------
include/linux/soc/cirrus/ep93xx.h | 4 ---
3 files changed, 8 insertions(+), 97 deletions(-)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 4ddf1a4cba33..9c6154bb37b5 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -779,78 +779,6 @@ void __init ep93xx_register_ide(void)
platform_device_register(&ep93xx_ide_device);
}
-int ep93xx_ide_acquire_gpio(struct platform_device *pdev)
-{
- int err;
- int i;
-
- err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev));
- if (err)
- return err;
- err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev));
- if (err)
- goto fail_egpio15;
- for (i = 2; i < 8; i++) {
- err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev));
- if (err)
- goto fail_gpio_e;
- }
- for (i = 4; i < 8; i++) {
- err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev));
- if (err)
- goto fail_gpio_g;
- }
- for (i = 0; i < 8; i++) {
- err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev));
- if (err)
- goto fail_gpio_h;
- }
-
- /* GPIO ports E[7:2], G[7:4] and H used by IDE */
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
- EP93XX_SYSCON_DEVCFG_GONIDE |
- EP93XX_SYSCON_DEVCFG_HONIDE);
- return 0;
-
-fail_gpio_h:
- for (--i; i >= 0; --i)
- gpio_free(EP93XX_GPIO_LINE_H(i));
- i = 8;
-fail_gpio_g:
- for (--i; i >= 4; --i)
- gpio_free(EP93XX_GPIO_LINE_G(i));
- i = 8;
-fail_gpio_e:
- for (--i; i >= 2; --i)
- gpio_free(EP93XX_GPIO_LINE_E(i));
- gpio_free(EP93XX_GPIO_LINE_EGPIO15);
-fail_egpio15:
- gpio_free(EP93XX_GPIO_LINE_EGPIO2);
- return err;
-}
-EXPORT_SYMBOL(ep93xx_ide_acquire_gpio);
-
-void ep93xx_ide_release_gpio(struct platform_device *pdev)
-{
- int i;
-
- for (i = 2; i < 8; i++)
- gpio_free(EP93XX_GPIO_LINE_E(i));
- for (i = 4; i < 8; i++)
- gpio_free(EP93XX_GPIO_LINE_G(i));
- for (i = 0; i < 8; i++)
- gpio_free(EP93XX_GPIO_LINE_H(i));
- gpio_free(EP93XX_GPIO_LINE_EGPIO15);
- gpio_free(EP93XX_GPIO_LINE_EGPIO2);
-
-
- /* GPIO ports E[7:2], G[7:4] and H used by GPIO */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
- EP93XX_SYSCON_DEVCFG_GONIDE |
- EP93XX_SYSCON_DEVCFG_HONIDE);
-}
-EXPORT_SYMBOL(ep93xx_ide_release_gpio);
-
/*************************************************************************
* EP93xx ADC
*************************************************************************/
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index 3f33916c2d23..83c2a0162cb0 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -652,13 +652,13 @@ static int ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
* start of new transfer.
*/
drv_data->dma_rx_channel = dma_request_chan(dev, "rx");
- if (IS_ERR(drv_data->dma_rx_channel)) {
+ if (PTR_ERR_OR_ZERO(drv_data->dma_rx_channel)) {
ret = PTR_ERR(drv_data->dma_rx_channel);
return dev_err_probe(dev, ret, "rx DMA setup failed");
}
drv_data->dma_tx_channel = dma_request_chan(&pdev->dev, "tx");
- if (IS_ERR(drv_data->dma_tx_channel)) {
+ if (PTR_ERR_OR_ZERO(drv_data->dma_tx_channel)) {
ret = PTR_ERR(drv_data->dma_tx_channel);
dev_err_probe(dev, ret, "tx DMA setup failed");
goto fail_release_rx;
@@ -923,28 +923,18 @@ static int ep93xx_pata_probe(struct platform_device *pdev)
void __iomem *ide_base;
int err;
- err = ep93xx_ide_acquire_gpio(pdev);
- if (err)
- return err;
-
/* INT[3] (IRQ_EP93XX_EXT3) line connected as pull down */
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- err = irq;
- goto err_rel_gpio;
- }
+ if (irq < 0)
+ return irq;
ide_base = devm_platform_get_and_ioremap_resource(pdev, 0, &mem_res);
- if (IS_ERR(ide_base)) {
- err = PTR_ERR(ide_base);
- goto err_rel_gpio;
- }
+ if (IS_ERR(ide_base))
+ return PTR_ERR(ide_base);
drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL);
- if (!drv_data) {
- err = -ENOMEM;
- goto err_rel_gpio;
- }
+ if (!drv_data)
+ return -ENOMEM;
drv_data->pdev = pdev;
drv_data->ide_base = ide_base;
@@ -1003,8 +993,6 @@ static int ep93xx_pata_probe(struct platform_device *pdev)
err_rel_dma:
ep93xx_pata_release_dma(drv_data);
-err_rel_gpio:
- ep93xx_ide_release_gpio(pdev);
return err;
}
@@ -1016,7 +1004,6 @@ static void ep93xx_pata_remove(struct platform_device *pdev)
ata_host_detach(host);
ep93xx_pata_release_dma(drv_data);
ep93xx_pata_clear_regs(drv_data->ide_base);
- ep93xx_ide_release_gpio(pdev);
}
static const struct of_device_id ep93xx_pata_of_ids[] = {
diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h
index fc4a2f9d4729..da8bdfc36526 100644
--- a/include/linux/soc/cirrus/ep93xx.h
+++ b/include/linux/soc/cirrus/ep93xx.h
@@ -37,15 +37,11 @@ struct ep93xx_regmap_adev {
container_of((_adev), struct ep93xx_regmap_adev, adev)
#ifdef CONFIG_ARCH_EP93XX
-int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
-void ep93xx_ide_release_gpio(struct platform_device *pdev);
int ep93xx_i2s_acquire(void);
void ep93xx_i2s_release(void);
unsigned int ep93xx_chip_revision(void);
#else
-static inline int ep93xx_ide_acquire_gpio(struct platform_device *pdev) { return 0; }
-static inline void ep93xx_ide_release_gpio(struct platform_device *pdev) {}
static inline int ep93xx_i2s_acquire(void) { return 0; }
static inline void ep93xx_i2s_release(void) {}
static inline unsigned int ep93xx_chip_revision(void) { return 0; }
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 37/40] ARM: ep93xx: delete all boardfiles
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (35 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 38/40] ARM: ep93xx: soc: drop defines Nikita Shubin via B4 Relay
` (4 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Hartley Sweeten, Alexander Sverdlin, Russell King,
Lukasz Majewski, Nikita Shubin
Cc: linux-arm-kernel, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Delete the ep93xx board files.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
arch/arm/mach-ep93xx/clock.c | 733 ------------------------
arch/arm/mach-ep93xx/core.c | 955 -------------------------------
arch/arm/mach-ep93xx/dma.c | 114 ----
arch/arm/mach-ep93xx/edb93xx.c | 344 -----------
arch/arm/mach-ep93xx/ep93xx-regs.h | 38 --
arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 ----
arch/arm/mach-ep93xx/hardware.h | 25 -
arch/arm/mach-ep93xx/irqs.h | 76 ---
arch/arm/mach-ep93xx/platform.h | 42 --
arch/arm/mach-ep93xx/soc.h | 212 -------
arch/arm/mach-ep93xx/timer-ep93xx.c | 143 -----
arch/arm/mach-ep93xx/ts72xx.c | 422 --------------
arch/arm/mach-ep93xx/ts72xx.h | 94 ---
arch/arm/mach-ep93xx/vision_ep9307.c | 311 ----------
include/linux/platform_data/spi-ep93xx.h | 15 -
15 files changed, 3635 deletions(-)
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
deleted file mode 100644
index 85a496ddc619..000000000000
--- a/arch/arm/mach-ep93xx/clock.c
+++ /dev/null
@@ -1,733 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/clock.c
- * Clock control for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/soc/cirrus/ep93xx.h>
-
-#include "hardware.h"
-
-#include <asm/div64.h>
-
-#include "soc.h"
-
-static DEFINE_SPINLOCK(clk_lock);
-
-static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
-static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
-static char pclk_divisors[] = { 1, 2, 4, 8 };
-
-static char adc_divisors[] = { 16, 4 };
-static char sclk_divisors[] = { 2, 4 };
-static char lrclk_divisors[] = { 32, 64, 128 };
-
-static const char * const mux_parents[] = {
- "xtali",
- "pll1",
- "pll2"
-};
-
-/*
- * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
- */
-static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word)
-{
- int i;
-
- rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
- rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
- do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
- for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */
- rate >>= 1;
-
- return (unsigned long)rate;
-}
-
-struct clk_psc {
- struct clk_hw hw;
- void __iomem *reg;
- u8 bit_idx;
- u32 mask;
- u8 shift;
- u8 width;
- char *div;
- u8 num_div;
- spinlock_t *lock;
-};
-
-#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
-
-static int ep93xx_clk_is_enabled(struct clk_hw *hw)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- u32 val = readl(psc->reg);
-
- return (val & BIT(psc->bit_idx)) ? 1 : 0;
-}
-
-static int ep93xx_clk_enable(struct clk_hw *hw)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long flags = 0;
- u32 val;
-
- if (psc->lock)
- spin_lock_irqsave(psc->lock, flags);
-
- val = __raw_readl(psc->reg);
- val |= BIT(psc->bit_idx);
-
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- if (psc->lock)
- spin_unlock_irqrestore(psc->lock, flags);
-
- return 0;
-}
-
-static void ep93xx_clk_disable(struct clk_hw *hw)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long flags = 0;
- u32 val;
-
- if (psc->lock)
- spin_lock_irqsave(psc->lock, flags);
-
- val = __raw_readl(psc->reg);
- val &= ~BIT(psc->bit_idx);
-
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- if (psc->lock)
- spin_unlock_irqrestore(psc->lock, flags);
-}
-
-static const struct clk_ops clk_ep93xx_gate_ops = {
- .enable = ep93xx_clk_enable,
- .disable = ep93xx_clk_disable,
- .is_enabled = ep93xx_clk_is_enabled,
-};
-
-static struct clk_hw *ep93xx_clk_register_gate(const char *name,
- const char *parent_name,
- void __iomem *reg,
- u8 bit_idx)
-{
- struct clk_init_data init;
- struct clk_psc *psc;
- struct clk *clk;
-
- psc = kzalloc(sizeof(*psc), GFP_KERNEL);
- if (!psc)
- return ERR_PTR(-ENOMEM);
-
- init.name = name;
- init.ops = &clk_ep93xx_gate_ops;
- init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
-
- psc->reg = reg;
- psc->bit_idx = bit_idx;
- psc->hw.init = &init;
- psc->lock = &clk_lock;
-
- clk = clk_register(NULL, &psc->hw);
- if (IS_ERR(clk)) {
- kfree(psc);
- return ERR_CAST(clk);
- }
-
- return &psc->hw;
-}
-
-static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- u32 val = __raw_readl(psc->reg);
-
- if (!(val & EP93XX_SYSCON_CLKDIV_ESEL))
- return 0;
-
- if (!(val & EP93XX_SYSCON_CLKDIV_PSEL))
- return 1;
-
- return 2;
-}
-
-static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long flags = 0;
- u32 val;
-
- if (index >= ARRAY_SIZE(mux_parents))
- return -EINVAL;
-
- if (psc->lock)
- spin_lock_irqsave(psc->lock, flags);
-
- val = __raw_readl(psc->reg);
- val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL);
-
-
- if (index != 0) {
- val |= EP93XX_SYSCON_CLKDIV_ESEL;
- val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
- }
-
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- if (psc->lock)
- spin_unlock_irqrestore(psc->lock, flags);
-
- return 0;
-}
-
-static bool is_best(unsigned long rate, unsigned long now,
- unsigned long best)
-{
- return abs(rate - now) < abs(rate - best);
-}
-
-static int ep93xx_mux_determine_rate(struct clk_hw *hw,
- struct clk_rate_request *req)
-{
- unsigned long rate = req->rate;
- struct clk *best_parent = NULL;
- unsigned long __parent_rate;
- unsigned long best_rate = 0, actual_rate, mclk_rate;
- unsigned long best_parent_rate;
- int __div = 0, __pdiv = 0;
- int i;
-
- /*
- * Try the two pll's and the external clock
- * Because the valid predividers are 2, 2.5 and 3, we multiply
- * all the clocks by 2 to avoid floating point math.
- *
- * This is based on the algorithm in the ep93xx raster guide:
- * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
- *
- */
- for (i = 0; i < ARRAY_SIZE(mux_parents); i++) {
- struct clk *parent = clk_get_sys(mux_parents[i], NULL);
-
- __parent_rate = clk_get_rate(parent);
- mclk_rate = __parent_rate * 2;
-
- /* Try each predivider value */
- for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
- __div = mclk_rate / (rate * __pdiv);
- if (__div < 2 || __div > 127)
- continue;
-
- actual_rate = mclk_rate / (__pdiv * __div);
- if (is_best(rate, actual_rate, best_rate)) {
- best_rate = actual_rate;
- best_parent_rate = __parent_rate;
- best_parent = parent;
- }
- }
- }
-
- if (!best_parent)
- return -EINVAL;
-
- req->best_parent_rate = best_parent_rate;
- req->best_parent_hw = __clk_get_hw(best_parent);
- req->rate = best_rate;
-
- return 0;
-}
-
-static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long rate = 0;
- u32 val = __raw_readl(psc->reg);
- int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03);
- int __div = val & 0x7f;
-
- if (__div > 0)
- rate = (parent_rate * 2) / ((__pdiv + 3) * __div);
-
- return rate;
-}
-
-static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- int pdiv = 0, div = 0;
- unsigned long best_rate = 0, actual_rate, mclk_rate;
- int __div = 0, __pdiv = 0;
- u32 val;
-
- mclk_rate = parent_rate * 2;
-
- for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
- __div = mclk_rate / (rate * __pdiv);
- if (__div < 2 || __div > 127)
- continue;
-
- actual_rate = mclk_rate / (__pdiv * __div);
- if (is_best(rate, actual_rate, best_rate)) {
- pdiv = __pdiv - 3;
- div = __div;
- best_rate = actual_rate;
- }
- }
-
- if (!best_rate)
- return -EINVAL;
-
- val = __raw_readl(psc->reg);
-
- /* Clear old dividers */
- val &= ~0x37f;
-
- /* Set the new pdiv and div bits for the new clock rate */
- val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- return 0;
-}
-
-static const struct clk_ops clk_ddiv_ops = {
- .enable = ep93xx_clk_enable,
- .disable = ep93xx_clk_disable,
- .is_enabled = ep93xx_clk_is_enabled,
- .get_parent = ep93xx_mux_get_parent,
- .set_parent = ep93xx_mux_set_parent_lock,
- .determine_rate = ep93xx_mux_determine_rate,
- .recalc_rate = ep93xx_ddiv_recalc_rate,
- .set_rate = ep93xx_ddiv_set_rate,
-};
-
-static struct clk_hw *clk_hw_register_ddiv(const char *name,
- void __iomem *reg,
- u8 bit_idx)
-{
- struct clk_init_data init;
- struct clk_psc *psc;
- struct clk *clk;
-
- psc = kzalloc(sizeof(*psc), GFP_KERNEL);
- if (!psc)
- return ERR_PTR(-ENOMEM);
-
- init.name = name;
- init.ops = &clk_ddiv_ops;
- init.flags = 0;
- init.parent_names = mux_parents;
- init.num_parents = ARRAY_SIZE(mux_parents);
-
- psc->reg = reg;
- psc->bit_idx = bit_idx;
- psc->lock = &clk_lock;
- psc->hw.init = &init;
-
- clk = clk_register(NULL, &psc->hw);
- if (IS_ERR(clk)) {
- kfree(psc);
- return ERR_CAST(clk);
- }
- return &psc->hw;
-}
-
-static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- u32 val = __raw_readl(psc->reg);
- u8 index = (val & psc->mask) >> psc->shift;
-
- if (index > psc->num_div)
- return 0;
-
- return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]);
-}
-
-static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- unsigned long best = 0, now, maxdiv;
- int i;
-
- maxdiv = psc->div[psc->num_div - 1];
-
- for (i = 0; i < psc->num_div; i++) {
- if ((rate * psc->div[i]) == *parent_rate)
- return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
-
- now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
-
- if (is_best(rate, now, best))
- best = now;
- }
-
- if (!best)
- best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv);
-
- return best;
-}
-
-static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_psc *psc = to_clk_psc(hw);
- u32 val = __raw_readl(psc->reg) & ~psc->mask;
- int i;
-
- for (i = 0; i < psc->num_div; i++)
- if (rate == parent_rate / psc->div[i]) {
- val |= i << psc->shift;
- break;
- }
-
- if (i == psc->num_div)
- return -EINVAL;
-
- ep93xx_syscon_swlocked_write(val, psc->reg);
-
- return 0;
-}
-
-static const struct clk_ops ep93xx_div_ops = {
- .enable = ep93xx_clk_enable,
- .disable = ep93xx_clk_disable,
- .is_enabled = ep93xx_clk_is_enabled,
- .recalc_rate = ep93xx_div_recalc_rate,
- .round_rate = ep93xx_div_round_rate,
- .set_rate = ep93xx_div_set_rate,
-};
-
-static struct clk_hw *clk_hw_register_div(const char *name,
- const char *parent_name,
- void __iomem *reg,
- u8 enable_bit,
- u8 shift,
- u8 width,
- char *clk_divisors,
- u8 num_div)
-{
- struct clk_init_data init;
- struct clk_psc *psc;
- struct clk *clk;
-
- psc = kzalloc(sizeof(*psc), GFP_KERNEL);
- if (!psc)
- return ERR_PTR(-ENOMEM);
-
- init.name = name;
- init.ops = &ep93xx_div_ops;
- init.flags = 0;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = 1;
-
- psc->reg = reg;
- psc->bit_idx = enable_bit;
- psc->mask = GENMASK(shift + width - 1, shift);
- psc->shift = shift;
- psc->div = clk_divisors;
- psc->num_div = num_div;
- psc->lock = &clk_lock;
- psc->hw.init = &init;
-
- clk = clk_register(NULL, &psc->hw);
- if (IS_ERR(clk)) {
- kfree(psc);
- return ERR_CAST(clk);
- }
- return &psc->hw;
-}
-
-struct ep93xx_gate {
- unsigned int bit;
- const char *dev_id;
- const char *con_id;
-};
-
-static struct ep93xx_gate ep93xx_uarts[] = {
- {EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL},
- {EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL},
- {EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL},
-};
-
-static void __init ep93xx_uart_clock_init(void)
-{
- unsigned int i;
- struct clk_hw *hw;
- u32 value;
- unsigned int clk_uart_div;
-
- value = __raw_readl(EP93XX_SYSCON_PWRCNT);
- if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
- clk_uart_div = 1;
- else
- clk_uart_div = 2;
-
- hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div);
-
- /* parenting uart gate clocks to uart clock */
- for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) {
- hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id,
- "uart",
- EP93XX_SYSCON_DEVCFG,
- ep93xx_uarts[i].bit);
-
- clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id);
- }
-}
-
-static struct ep93xx_gate ep93xx_dmas[] = {
- {EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"},
- {EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"},
-};
-
-static void __init ep93xx_dma_clock_init(void)
-{
- unsigned int i;
- struct clk_hw *hw;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) {
- hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id,
- "hclk", 0,
- EP93XX_SYSCON_PWRCNT,
- ep93xx_dmas[i].bit,
- 0,
- &clk_lock);
-
- ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL);
- if (ret)
- pr_err("%s: failed to register lookup %s\n",
- __func__, ep93xx_dmas[i].con_id);
- }
-}
-
-static int __init ep93xx_clock_init(void)
-{
- u32 value;
- struct clk_hw *hw;
- unsigned long clk_pll1_rate;
- unsigned long clk_f_rate;
- unsigned long clk_h_rate;
- unsigned long clk_p_rate;
- unsigned long clk_pll2_rate;
- unsigned int clk_f_div;
- unsigned int clk_h_div;
- unsigned int clk_p_div;
- unsigned int clk_usb_div;
- unsigned long clk_spi_div;
-
- hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE);
- clk_hw_register_clkdev(hw, NULL, "xtali");
-
- /* Determine the bootloader configured pll1 rate */
- value = __raw_readl(EP93XX_SYSCON_CLKSET1);
- if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
- clk_pll1_rate = EP93XX_EXT_CLK_RATE;
- else
- clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
-
- hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate);
- clk_hw_register_clkdev(hw, NULL, "pll1");
-
- /* Initialize the pll1 derived clocks */
- clk_f_div = fclk_divisors[(value >> 25) & 0x7];
- clk_h_div = hclk_divisors[(value >> 20) & 0x7];
- clk_p_div = pclk_divisors[(value >> 18) & 0x3];
-
- hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div);
- clk_f_rate = clk_get_rate(hw->clk);
- hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div);
- clk_h_rate = clk_get_rate(hw->clk);
- hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div);
- clk_p_rate = clk_get_rate(hw->clk);
-
- clk_hw_register_clkdev(hw, "apb_pclk", NULL);
-
- ep93xx_dma_clock_init();
-
- /* Determine the bootloader configured pll2 rate */
- value = __raw_readl(EP93XX_SYSCON_CLKSET2);
- if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
- clk_pll2_rate = EP93XX_EXT_CLK_RATE;
- else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
- clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
- else
- clk_pll2_rate = 0;
-
- hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate);
- clk_hw_register_clkdev(hw, NULL, "pll2");
-
- /* Initialize the pll2 derived clocks */
- /*
- * These four bits set the divide ratio between the PLL2
- * output and the USB clock.
- * 0000 - Divide by 1
- * 0001 - Divide by 2
- * 0010 - Divide by 3
- * 0011 - Divide by 4
- * 0100 - Divide by 5
- * 0101 - Divide by 6
- * 0110 - Divide by 7
- * 0111 - Divide by 8
- * 1000 - Divide by 9
- * 1001 - Divide by 10
- * 1010 - Divide by 11
- * 1011 - Divide by 12
- * 1100 - Divide by 13
- * 1101 - Divide by 14
- * 1110 - Divide by 15
- * 1111 - Divide by 1
- * On power-on-reset these bits are reset to 0000b.
- */
- clk_usb_div = (((value >> 28) & 0xf) + 1);
- hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div);
- hw = clk_hw_register_gate(NULL, "ohci-platform",
- "usb_clk", 0,
- EP93XX_SYSCON_PWRCNT,
- EP93XX_SYSCON_PWRCNT_USH_EN,
- 0,
- &clk_lock);
- clk_hw_register_clkdev(hw, NULL, "ohci-platform");
-
- /*
- * EP93xx SSP clock rate was doubled in version E2. For more information
- * see:
- * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
- clk_spi_div = 1;
- if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
- clk_spi_div = 2;
- hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div);
- clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0");
-
- /* pwm clock */
- hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1);
- clk_hw_register_clkdev(hw, "pwm_clk", NULL);
-
- pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
- clk_pll1_rate / 1000000, clk_pll2_rate / 1000000);
- pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
- clk_f_rate / 1000000, clk_h_rate / 1000000,
- clk_p_rate / 1000000);
-
- ep93xx_uart_clock_init();
-
- /* touchscreen/adc clock */
- hw = clk_hw_register_div("ep93xx-adc",
- "xtali",
- EP93XX_SYSCON_KEYTCHCLKDIV,
- EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
- EP93XX_SYSCON_KEYTCHCLKDIV_ADIV,
- 1,
- adc_divisors,
- ARRAY_SIZE(adc_divisors));
-
- clk_hw_register_clkdev(hw, NULL, "ep93xx-adc");
-
- /* keypad clock */
- hw = clk_hw_register_div("ep93xx-keypad",
- "xtali",
- EP93XX_SYSCON_KEYTCHCLKDIV,
- EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
- EP93XX_SYSCON_KEYTCHCLKDIV_KDIV,
- 1,
- adc_divisors,
- ARRAY_SIZE(adc_divisors));
-
- clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad");
-
- /* On reset PDIV and VDIV is set to zero, while PDIV zero
- * means clock disable, VDIV shouldn't be zero.
- * So i set both dividers to minimum.
- */
- /* ENA - Enable CLK divider. */
- /* PDIV - 00 - Disable clock */
- /* VDIV - at least 2 */
- /* Check and enable video clk registers */
- value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV);
- value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
- ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV);
-
- /* check and enable i2s clk registers */
- value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
- value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
- ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV);
-
- /* video clk */
- hw = clk_hw_register_ddiv("ep93xx-fb",
- EP93XX_SYSCON_VIDCLKDIV,
- EP93XX_SYSCON_CLKDIV_ENABLE);
-
- clk_hw_register_clkdev(hw, NULL, "ep93xx-fb");
-
- /* i2s clk */
- hw = clk_hw_register_ddiv("mclk",
- EP93XX_SYSCON_I2SCLKDIV,
- EP93XX_SYSCON_CLKDIV_ENABLE);
-
- clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s");
-
- /* i2s sclk */
-#define EP93XX_I2SCLKDIV_SDIV_SHIFT 16
-#define EP93XX_I2SCLKDIV_SDIV_WIDTH 1
- hw = clk_hw_register_div("sclk",
- "mclk",
- EP93XX_SYSCON_I2SCLKDIV,
- EP93XX_SYSCON_I2SCLKDIV_SENA,
- EP93XX_I2SCLKDIV_SDIV_SHIFT,
- EP93XX_I2SCLKDIV_SDIV_WIDTH,
- sclk_divisors,
- ARRAY_SIZE(sclk_divisors));
-
- clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s");
-
- /* i2s lrclk */
-#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT 17
-#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH 3
- hw = clk_hw_register_div("lrclk",
- "sclk",
- EP93XX_SYSCON_I2SCLKDIV,
- EP93XX_SYSCON_I2SCLKDIV_SENA,
- EP93XX_I2SCLKDIV_LRDIV32_SHIFT,
- EP93XX_I2SCLKDIV_LRDIV32_WIDTH,
- lrclk_divisors,
- ARRAY_SIZE(lrclk_divisors));
-
- clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s");
-
- return 0;
-}
-postcore_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
deleted file mode 100644
index 9c6154bb37b5..000000000000
--- a/arch/arm/mach-ep93xx/core.c
+++ /dev/null
@@ -1,955 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/core.c
- * Core routines for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * Thanks go to Michael Burian and Ray Lehtiniemi for their key
- * role in the ep93xx linux community.
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/sys_soc.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/uaccess.h>
-#include <linux/termios.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/reboot.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/random.h>
-#include <linux/ioport.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/keypad-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/soc/cirrus/ep93xx.h>
-
-#include "gpio-ep93xx.h"
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "soc.h"
-#include "irqs.h"
-
-/*************************************************************************
- * Static I/O mappings that are needed for all EP93xx platforms
- *************************************************************************/
-static struct map_desc ep93xx_io_desc[] __initdata = {
- {
- .virtual = EP93XX_AHB_VIRT_BASE,
- .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
- .length = EP93XX_AHB_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = EP93XX_APB_VIRT_BASE,
- .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
- .length = EP93XX_APB_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init ep93xx_map_io(void)
-{
- iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
-}
-
-/*************************************************************************
- * EP93xx IRQ handling
- *************************************************************************/
-void __init ep93xx_init_irq(void)
-{
- vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
- vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0);
-}
-
-
-/*************************************************************************
- * EP93xx System Controller Software Locked register handling
- *************************************************************************/
-
-/*
- * syscon_swlock prevents anything else from writing to the syscon
- * block while a software locked register is being written.
- */
-static DEFINE_SPINLOCK(syscon_swlock);
-
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&syscon_swlock, flags);
-
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(val, reg);
-
- spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
-{
- unsigned long flags;
- unsigned int val;
-
- spin_lock_irqsave(&syscon_swlock, flags);
-
- val = __raw_readl(EP93XX_SYSCON_DEVCFG);
- val &= ~clear_bits;
- val |= set_bits;
- __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
- __raw_writel(val, EP93XX_SYSCON_DEVCFG);
-
- spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-/**
- * ep93xx_chip_revision() - returns the EP93xx chip revision
- *
- * See "platform.h" for more information.
- */
-unsigned int ep93xx_chip_revision(void)
-{
- unsigned int v;
-
- v = __raw_readl(EP93XX_SYSCON_SYSCFG);
- v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
- v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
- return v;
-}
-EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
-
-/*************************************************************************
- * EP93xx GPIO
- *************************************************************************/
-/* port A */
-static struct resource ep93xx_a_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x10, 0x04, "dir"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x90, 0x1c, "intr"),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
-};
-
-static struct platform_device ep93xx_a_gpio = {
- .name = "gpio-ep93xx",
- .id = 0,
- .num_resources = ARRAY_SIZE(ep93xx_a_gpio_resources),
- .resource = ep93xx_a_gpio_resources,
-};
-
-/* port B */
-static struct resource ep93xx_b_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x04, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x14, 0x04, "dir"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0xac, 0x1c, "intr"),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB),
-};
-
-static struct platform_device ep93xx_b_gpio = {
- .name = "gpio-ep93xx",
- .id = 1,
- .num_resources = ARRAY_SIZE(ep93xx_b_gpio_resources),
- .resource = ep93xx_b_gpio_resources,
-};
-
-/* port C */
-static struct resource ep93xx_c_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x08, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x18, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_c_gpio = {
- .name = "gpio-ep93xx",
- .id = 2,
- .num_resources = ARRAY_SIZE(ep93xx_c_gpio_resources),
- .resource = ep93xx_c_gpio_resources,
-};
-
-/* port D */
-static struct resource ep93xx_d_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x0c, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x1c, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_d_gpio = {
- .name = "gpio-ep93xx",
- .id = 3,
- .num_resources = ARRAY_SIZE(ep93xx_d_gpio_resources),
- .resource = ep93xx_d_gpio_resources,
-};
-
-/* port E */
-static struct resource ep93xx_e_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x20, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x24, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_e_gpio = {
- .name = "gpio-ep93xx",
- .id = 4,
- .num_resources = ARRAY_SIZE(ep93xx_e_gpio_resources),
- .resource = ep93xx_e_gpio_resources,
-};
-
-/* port F */
-static struct resource ep93xx_f_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x30, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x34, 0x04, "dir"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x4c, 0x1c, "intr"),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX),
- DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX),
-};
-
-static struct platform_device ep93xx_f_gpio = {
- .name = "gpio-ep93xx",
- .id = 5,
- .num_resources = ARRAY_SIZE(ep93xx_f_gpio_resources),
- .resource = ep93xx_f_gpio_resources,
-};
-
-/* port G */
-static struct resource ep93xx_g_gpio_resources[] = {
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x38, 0x04, "data"),
- DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x3c, 0x04, "dir"),
-};
-
-static struct platform_device ep93xx_g_gpio = {
- .name = "gpio-ep93xx",
- .id = 6,
- .num_resources = ARRAY_SIZE(ep93xx_g_gpio_resources),
- .resource = ep93xx_g_gpio_resources,
-};
-
-static struct platform_device *ep93xx_gpio_device[] __initdata = {
- &ep93xx_a_gpio,
- &ep93xx_b_gpio,
- &ep93xx_c_gpio,
- &ep93xx_d_gpio,
- &ep93xx_e_gpio,
- &ep93xx_f_gpio,
- &ep93xx_g_gpio,
-};
-
-/*************************************************************************
- * EP93xx peripheral handling
- *************************************************************************/
-#define EP93XX_UART_MCR_OFFSET (0x0100)
-
-static void ep93xx_uart_set_mctrl(struct amba_device *dev,
- void __iomem *base, unsigned int mctrl)
-{
- unsigned int mcr;
-
- mcr = 0;
- if (mctrl & TIOCM_RTS)
- mcr |= 2;
- if (mctrl & TIOCM_DTR)
- mcr |= 1;
-
- __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
-}
-
-static struct amba_pl010_data ep93xx_uart_data = {
- .set_mctrl = ep93xx_uart_set_mctrl,
-};
-
-static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
- { IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
-
-static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
- { IRQ_EP93XX_UART2 }, NULL);
-
-static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
- { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
-
-static struct resource ep93xx_rtc_resource[] = {
- DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c),
-};
-
-static struct platform_device ep93xx_rtc_device = {
- .name = "ep93xx-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
- .resource = ep93xx_rtc_resource,
-};
-
-/*************************************************************************
- * EP93xx OHCI USB Host
- *************************************************************************/
-
-static struct clk *ep93xx_ohci_host_clock;
-
-static int ep93xx_ohci_power_on(struct platform_device *pdev)
-{
- if (!ep93xx_ohci_host_clock) {
- ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(ep93xx_ohci_host_clock))
- return PTR_ERR(ep93xx_ohci_host_clock);
- }
-
- return clk_prepare_enable(ep93xx_ohci_host_clock);
-}
-
-static void ep93xx_ohci_power_off(struct platform_device *pdev)
-{
- clk_disable(ep93xx_ohci_host_clock);
-}
-
-static struct usb_ohci_pdata ep93xx_ohci_pdata = {
- .power_on = ep93xx_ohci_power_on,
- .power_off = ep93xx_ohci_power_off,
- .power_suspend = ep93xx_ohci_power_off,
-};
-
-static struct resource ep93xx_ohci_resources[] = {
- DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
- DEFINE_RES_IRQ(IRQ_EP93XX_USB),
-};
-
-static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_ohci_device = {
- .name = "ohci-platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_ohci_resources),
- .resource = ep93xx_ohci_resources,
- .dev = {
- .dma_mask = &ep93xx_ohci_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ep93xx_ohci_pdata,
- },
-};
-
-/*************************************************************************
- * EP93xx physmap'ed flash
- *************************************************************************/
-static struct physmap_flash_data ep93xx_flash_data;
-
-static struct resource ep93xx_flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ep93xx_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ep93xx_flash_data,
- },
- .num_resources = 1,
- .resource = &ep93xx_flash_resource,
-};
-
-/**
- * ep93xx_register_flash() - Register the external flash device.
- * @width: bank width in octets
- * @start: resource start address
- * @size: resource size
- */
-void __init ep93xx_register_flash(unsigned int width,
- resource_size_t start, resource_size_t size)
-{
- ep93xx_flash_data.width = width;
-
- ep93xx_flash_resource.start = start;
- ep93xx_flash_resource.end = start + size - 1;
-
- platform_device_register(&ep93xx_flash);
-}
-
-
-/*************************************************************************
- * EP93xx ethernet peripheral handling
- *************************************************************************/
-static struct ep93xx_eth_data ep93xx_eth_data;
-
-static struct resource ep93xx_eth_resource[] = {
- DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000),
- DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET),
-};
-
-static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_eth_device = {
- .name = "ep93xx-eth",
- .id = -1,
- .dev = {
- .platform_data = &ep93xx_eth_data,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &ep93xx_eth_dma_mask,
- },
- .num_resources = ARRAY_SIZE(ep93xx_eth_resource),
- .resource = ep93xx_eth_resource,
-};
-
-/**
- * ep93xx_register_eth - Register the built-in ethernet platform device.
- * @data: platform specific ethernet configuration (__initdata)
- * @copy_addr: flag indicating that the MAC address should be copied
- * from the IndAd registers (as programmed by the bootloader)
- */
-void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
-{
- if (copy_addr)
- memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
-
- ep93xx_eth_data = *data;
- platform_device_register(&ep93xx_eth_device);
-}
-
-
-/*************************************************************************
- * EP93xx i2c peripheral handling
- *************************************************************************/
-
-/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
-static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
- .dev_id = "i2c-gpio.0",
- .table = {
- /* Use local offsets on gpiochip/port "G" */
- GPIO_LOOKUP_IDX("gpio-ep93xx.6", 1, NULL, 0,
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP_IDX("gpio-ep93xx.6", 0, NULL, 1,
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- { }
- },
-};
-
-static struct platform_device ep93xx_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- },
-};
-
-/**
- * ep93xx_register_i2c - Register the i2c platform device.
- * @devices: platform specific i2c bus device information (__initdata)
- * @num: the number of devices on the i2c bus
- */
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
-{
- /*
- * FIXME: this just sets the two pins as non-opendrain, as no
- * platforms tries to do that anyway. Flag the applicable lines
- * as open drain in the GPIO_LOOKUP above and the driver or
- * gpiolib will handle open drain/open drain emulation as need
- * be. Right now i2c-gpio emulates open drain which is not
- * optimal.
- */
- __raw_writel((0 << 1) | (0 << 0),
- EP93XX_GPIO_EEDRIVE);
-
- i2c_register_board_info(0, devices, num);
- gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table);
- platform_device_register(&ep93xx_i2c_device);
-}
-
-/*************************************************************************
- * EP93xx SPI peripheral handling
- *************************************************************************/
-static struct ep93xx_spi_info ep93xx_spi_master_data;
-
-static struct resource ep93xx_spi_resources[] = {
- DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18),
- DEFINE_RES_IRQ(IRQ_EP93XX_SSP),
-};
-
-static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_spi_device = {
- .name = "ep93xx-spi",
- .id = 0,
- .dev = {
- .platform_data = &ep93xx_spi_master_data,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &ep93xx_spi_dma_mask,
- },
- .num_resources = ARRAY_SIZE(ep93xx_spi_resources),
- .resource = ep93xx_spi_resources,
-};
-
-/**
- * ep93xx_register_spi() - registers spi platform device
- * @info: ep93xx board specific spi master info (__initdata)
- * @devices: SPI devices to register (__initdata)
- * @num: number of SPI devices to register
- *
- * This function registers platform device for the EP93xx SPI controller and
- * also makes sure that SPI pins are muxed so that I2S is not using those pins.
- */
-void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
- struct spi_board_info *devices, int num)
-{
- /*
- * When SPI is used, we need to make sure that I2S is muxed off from
- * SPI pins.
- */
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
-
- ep93xx_spi_master_data = *info;
- spi_register_board_info(devices, num);
- platform_device_register(&ep93xx_spi_device);
-}
-
-/*************************************************************************
- * EP93xx LEDs
- *************************************************************************/
-static const struct gpio_led ep93xx_led_pins[] __initconst = {
- {
- .name = "platform:grled",
- }, {
- .name = "platform:rdled",
- },
-};
-
-static const struct gpio_led_platform_data ep93xx_led_data __initconst = {
- .num_leds = ARRAY_SIZE(ep93xx_led_pins),
- .leds = ep93xx_led_pins,
-};
-
-static struct gpiod_lookup_table ep93xx_leds_gpio_table = {
- .dev_id = "leds-gpio",
- .table = {
- /* Use local offsets on gpiochip/port "E" */
- GPIO_LOOKUP_IDX("gpio-ep93xx.4", 0, NULL, 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("gpio-ep93xx.4", 1, NULL, 1, GPIO_ACTIVE_HIGH),
- { }
- },
-};
-
-/*************************************************************************
- * EP93xx pwm peripheral handling
- *************************************************************************/
-static struct resource ep93xx_pwm0_resource[] = {
- DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10),
-};
-
-static struct platform_device ep93xx_pwm0_device = {
- .name = "ep93xx-pwm",
- .id = 0,
- .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource),
- .resource = ep93xx_pwm0_resource,
-};
-
-static struct resource ep93xx_pwm1_resource[] = {
- DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10),
-};
-
-static struct platform_device ep93xx_pwm1_device = {
- .name = "ep93xx-pwm",
- .id = 1,
- .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource),
- .resource = ep93xx_pwm1_resource,
-};
-
-void __init ep93xx_register_pwm(int pwm0, int pwm1)
-{
- if (pwm0)
- platform_device_register(&ep93xx_pwm0_device);
-
- /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
- if (pwm1)
- platform_device_register(&ep93xx_pwm1_device);
-}
-
-/*************************************************************************
- * EP93xx video peripheral handling
- *************************************************************************/
-static struct ep93xxfb_mach_info ep93xxfb_data;
-
-static struct resource ep93xx_fb_resource[] = {
- DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800),
-};
-
-static struct platform_device ep93xx_fb_device = {
- .name = "ep93xx-fb",
- .id = -1,
- .dev = {
- .platform_data = &ep93xxfb_data,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask,
- },
- .num_resources = ARRAY_SIZE(ep93xx_fb_resource),
- .resource = ep93xx_fb_resource,
-};
-
-/* The backlight use a single register in the framebuffer's register space */
-#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
-
-static struct resource ep93xx_bl_resources[] = {
- DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
- EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
-};
-
-static struct platform_device ep93xx_bl_device = {
- .name = "ep93xx-bl",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_bl_resources),
- .resource = ep93xx_bl_resources,
-};
-
-/**
- * ep93xx_register_fb - Register the framebuffer platform device.
- * @data: platform specific framebuffer configuration (__initdata)
- */
-void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
-{
- ep93xxfb_data = *data;
- platform_device_register(&ep93xx_fb_device);
- platform_device_register(&ep93xx_bl_device);
-}
-
-
-/*************************************************************************
- * EP93xx matrix keypad peripheral handling
- *************************************************************************/
-static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
-
-static struct resource ep93xx_keypad_resource[] = {
- DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c),
- DEFINE_RES_IRQ(IRQ_EP93XX_KEY),
-};
-
-static struct platform_device ep93xx_keypad_device = {
- .name = "ep93xx-keypad",
- .id = -1,
- .dev = {
- .platform_data = &ep93xx_keypad_data,
- },
- .num_resources = ARRAY_SIZE(ep93xx_keypad_resource),
- .resource = ep93xx_keypad_resource,
-};
-
-/**
- * ep93xx_register_keypad - Register the keypad platform device.
- * @data: platform specific keypad configuration (__initdata)
- */
-void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
-{
- ep93xx_keypad_data = *data;
- platform_device_register(&ep93xx_keypad_device);
-}
-
-/*************************************************************************
- * EP93xx I2S audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_i2s_resource[] = {
- DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
- DEFINE_RES_IRQ(IRQ_EP93XX_SAI),
-};
-
-static struct platform_device ep93xx_i2s_device = {
- .name = "ep93xx-i2s",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_i2s_resource),
- .resource = ep93xx_i2s_resource,
-};
-
-static struct platform_device ep93xx_pcm_device = {
- .name = "ep93xx-pcm-audio",
- .id = -1,
-};
-
-void __init ep93xx_register_i2s(void)
-{
- platform_device_register(&ep93xx_i2s_device);
- platform_device_register(&ep93xx_pcm_device);
-}
-
-#define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \
- EP93XX_SYSCON_DEVCFG_I2SONAC97)
-
-#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
- EP93XX_SYSCON_I2SCLKDIV_SPOL)
-
-int ep93xx_i2s_acquire(void)
-{
- unsigned val;
-
- ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
- EP93XX_SYSCON_DEVCFG_I2S_MASK);
-
- /*
- * This is potentially racy with the clock api for i2s_mclk, sclk and
- * lrclk. Since the i2s driver is the only user of those clocks we
- * rely on it to prevent parallel use of this function and the
- * clock api for the i2s clocks.
- */
- val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
- val &= ~EP93XX_I2SCLKDIV_MASK;
- val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
- ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
-
- return 0;
-}
-EXPORT_SYMBOL(ep93xx_i2s_acquire);
-
-void ep93xx_i2s_release(void)
-{
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
-}
-EXPORT_SYMBOL(ep93xx_i2s_release);
-
-/*************************************************************************
- * EP93xx AC97 audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_ac97_resources[] = {
- DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac),
- DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR),
-};
-
-static struct platform_device ep93xx_ac97_device = {
- .name = "ep93xx-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_ac97_resources),
- .resource = ep93xx_ac97_resources,
-};
-
-void __init ep93xx_register_ac97(void)
-{
- /*
- * Make sure that the AC97 pins are not used by I2S.
- */
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
-
- platform_device_register(&ep93xx_ac97_device);
- platform_device_register(&ep93xx_pcm_device);
-}
-
-/*************************************************************************
- * EP93xx Watchdog
- *************************************************************************/
-static struct resource ep93xx_wdt_resources[] = {
- DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08),
-};
-
-static struct platform_device ep93xx_wdt_device = {
- .name = "ep93xx-wdt",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_wdt_resources),
- .resource = ep93xx_wdt_resources,
-};
-
-/*************************************************************************
- * EP93xx IDE
- *************************************************************************/
-static struct resource ep93xx_ide_resources[] = {
- DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38),
- DEFINE_RES_IRQ(IRQ_EP93XX_EXT3),
-};
-
-static struct platform_device ep93xx_ide_device = {
- .name = "ep93xx-ide",
- .id = -1,
- .dev = {
- .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(ep93xx_ide_resources),
- .resource = ep93xx_ide_resources,
-};
-
-void __init ep93xx_register_ide(void)
-{
- platform_device_register(&ep93xx_ide_device);
-}
-
-/*************************************************************************
- * EP93xx ADC
- *************************************************************************/
-static struct resource ep93xx_adc_resources[] = {
- DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28),
- DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH),
-};
-
-static struct platform_device ep93xx_adc_device = {
- .name = "ep93xx-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_adc_resources),
- .resource = ep93xx_adc_resources,
-};
-
-void __init ep93xx_register_adc(void)
-{
- /* Power up ADC, deactivate Touch Screen Controller */
- ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN,
- EP93XX_SYSCON_DEVCFG_ADCPD);
-
- platform_device_register(&ep93xx_adc_device);
-}
-
-/*************************************************************************
- * EP93xx Security peripheral
- *************************************************************************/
-
-/*
- * The Maverick Key is 256 bits of micro fuses blown at the factory during
- * manufacturing to uniquely identify a part.
- *
- * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key
- */
-#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
-#define EP93XX_SECURITY_SECFLG EP93XX_SECURITY_REG(0x2400)
-#define EP93XX_SECURITY_FUSEFLG EP93XX_SECURITY_REG(0x2410)
-#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
-#define EP93XX_SECURITY_UNIQCHK EP93XX_SECURITY_REG(0x2450)
-#define EP93XX_SECURITY_UNIQVAL EP93XX_SECURITY_REG(0x2460)
-#define EP93XX_SECURITY_SECID1 EP93XX_SECURITY_REG(0x2500)
-#define EP93XX_SECURITY_SECID2 EP93XX_SECURITY_REG(0x2504)
-#define EP93XX_SECURITY_SECCHK1 EP93XX_SECURITY_REG(0x2520)
-#define EP93XX_SECURITY_SECCHK2 EP93XX_SECURITY_REG(0x2524)
-#define EP93XX_SECURITY_UNIQID2 EP93XX_SECURITY_REG(0x2700)
-#define EP93XX_SECURITY_UNIQID3 EP93XX_SECURITY_REG(0x2704)
-#define EP93XX_SECURITY_UNIQID4 EP93XX_SECURITY_REG(0x2708)
-#define EP93XX_SECURITY_UNIQID5 EP93XX_SECURITY_REG(0x270c)
-
-static char ep93xx_soc_id[33];
-
-static const char __init *ep93xx_get_soc_id(void)
-{
- unsigned int id, id2, id3, id4, id5;
-
- if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1)
- return "bad Hamming code";
-
- id = __raw_readl(EP93XX_SECURITY_UNIQID);
- id2 = __raw_readl(EP93XX_SECURITY_UNIQID2);
- id3 = __raw_readl(EP93XX_SECURITY_UNIQID3);
- id4 = __raw_readl(EP93XX_SECURITY_UNIQID4);
- id5 = __raw_readl(EP93XX_SECURITY_UNIQID5);
-
- if (id != id2)
- return "invalid";
-
- /* Toss the unique ID into the entropy pool */
- add_device_randomness(&id2, 4);
- add_device_randomness(&id3, 4);
- add_device_randomness(&id4, 4);
- add_device_randomness(&id5, 4);
-
- snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id),
- "%08x%08x%08x%08x", id2, id3, id4, id5);
-
- return ep93xx_soc_id;
-}
-
-static const char __init *ep93xx_get_soc_rev(void)
-{
- int rev = ep93xx_chip_revision();
-
- switch (rev) {
- case EP93XX_CHIP_REV_D0:
- return "D0";
- case EP93XX_CHIP_REV_D1:
- return "D1";
- case EP93XX_CHIP_REV_E0:
- return "E0";
- case EP93XX_CHIP_REV_E1:
- return "E1";
- case EP93XX_CHIP_REV_E2:
- return "E2";
- default:
- return "unknown";
- }
-}
-
-static const char __init *ep93xx_get_machine_name(void)
-{
- return kasprintf(GFP_KERNEL,"%s", machine_desc->name);
-}
-
-static struct device __init *ep93xx_init_soc(void)
-{
- struct soc_device_attribute *soc_dev_attr;
- struct soc_device *soc_dev;
-
- soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
- if (!soc_dev_attr)
- return NULL;
-
- soc_dev_attr->machine = ep93xx_get_machine_name();
- soc_dev_attr->family = "Cirrus Logic EP93xx";
- soc_dev_attr->revision = ep93xx_get_soc_rev();
- soc_dev_attr->soc_id = ep93xx_get_soc_id();
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev)) {
- kfree(soc_dev_attr->machine);
- kfree(soc_dev_attr);
- return NULL;
- }
-
- return soc_device_to_device(soc_dev);
-}
-
-struct device __init *ep93xx_init_devices(void)
-{
- struct device *parent;
- unsigned int i;
-
- /* Disallow access to MaverickCrunch initially */
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
-
- /* Default all ports to GPIO */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
- EP93XX_SYSCON_DEVCFG_GONK |
- EP93XX_SYSCON_DEVCFG_EONIDE |
- EP93XX_SYSCON_DEVCFG_GONIDE |
- EP93XX_SYSCON_DEVCFG_HONIDE);
-
- parent = ep93xx_init_soc();
-
- /* Get the GPIO working early, other devices need it */
- for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_device); i++)
- platform_device_register(ep93xx_gpio_device[i]);
-
- amba_device_register(&uart1_device, &iomem_resource);
- amba_device_register(&uart2_device, &iomem_resource);
- amba_device_register(&uart3_device, &iomem_resource);
-
- platform_device_register(&ep93xx_rtc_device);
- platform_device_register(&ep93xx_ohci_device);
- platform_device_register(&ep93xx_wdt_device);
-
- gpiod_add_lookup_table(&ep93xx_leds_gpio_table);
- gpio_led_register_device(-1, &ep93xx_led_data);
-
- return parent;
-}
-
-void ep93xx_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Set then clear the SWRST bit to initiate a software reset
- */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
- while (1)
- ;
-}
diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c
deleted file mode 100644
index 74515acab8ef..000000000000
--- a/arch/arm/mach-ep93xx/dma.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/dma.c
- *
- * Platform support code for the EP93xx dmaengine driver.
- *
- * Copyright (C) 2011 Mika Westerberg
- *
- * This work is based on the original dma-m2p implementation with
- * following copyrights:
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- * Copyright (C) 2006 Applied Data Systems
- * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com>
- */
-
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/platform_data/dma-ep93xx.h>
-#include "hardware.h"
-
-#include "soc.h"
-
-#define DMA_CHANNEL(_name, _base, _irq) \
- { .name = (_name), .base = (_base), .irq = (_irq) }
-
-/*
- * DMA M2P channels.
- *
- * On the EP93xx chip the following peripherals my be allocated to the 10
- * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
- *
- * I2S contains 3 Tx and 3 Rx DMA Channels
- * AAC contains 3 Tx and 3 Rx DMA Channels
- * UART1 contains 1 Tx and 1 Rx DMA Channels
- * UART2 contains 1 Tx and 1 Rx DMA Channels
- * UART3 contains 1 Tx and 1 Rx DMA Channels
- * IrDA contains 1 Tx and 1 Rx DMA Channels
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = {
- DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0),
- DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1),
- DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2),
- DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3),
- DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4),
- DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5),
- DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6),
- DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7),
- DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8),
- DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = {
- .channels = ep93xx_dma_m2p_channels,
- .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels),
-};
-
-static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_dma_m2p_device = {
- .name = "ep93xx-dma-m2p",
- .id = -1,
- .dev = {
- .platform_data = &ep93xx_dma_m2p_data,
- .dma_mask = &ep93xx_dma_m2p_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-/*
- * DMA M2M channels.
- *
- * There are 2 M2M channels which support memcpy/memset and in addition simple
- * hardware requests from/to SSP and IDE. We do not implement an external
- * hardware requests.
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = {
- DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0),
- DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = {
- .channels = ep93xx_dma_m2m_channels,
- .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels),
-};
-
-static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_dma_m2m_device = {
- .name = "ep93xx-dma-m2m",
- .id = -1,
- .dev = {
- .platform_data = &ep93xx_dma_m2m_data,
- .dma_mask = &ep93xx_dma_m2m_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static int __init ep93xx_dma_init(void)
-{
- platform_device_register(&ep93xx_dma_m2p_device);
- platform_device_register(&ep93xx_dma_m2m_device);
- return 0;
-}
-arch_initcall(ep93xx_dma_init);
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
deleted file mode 100644
index c1e880946f72..000000000000
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/edb93xx.c
- * Cirrus Logic EDB93xx Development Board support.
- *
- * EDB93XX, EDB9301, EDB9307A
- * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * EDB9302
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * EDB9302A, EDB9315, EDB9315A
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * EDB9307
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * EDB9312
- * Copyright (C) 2006 Infosys Technologies Limited
- * Toufeeq Hussain <toufeeq_hussain@infosys.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio/machine.h>
-
-#include <sound/cs4271.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static void __init edb93xx_register_flash(void)
-{
- if (machine_is_edb9307() || machine_is_edb9312() ||
- machine_is_edb9315()) {
- ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
- } else {
- ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
- }
-}
-
-static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
- .phy_id = 1,
-};
-
-
-/*************************************************************************
- * EDB93xx i2c peripheral handling
- *************************************************************************/
-
-static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
- {
- I2C_BOARD_INFO("isl1208", 0x6f),
- },
-};
-
-static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
- {
- I2C_BOARD_INFO("ds1337", 0x68),
- },
-};
-
-static void __init edb93xx_register_i2c(void)
-{
- if (machine_is_edb9302a() || machine_is_edb9307a() ||
- machine_is_edb9315a()) {
- ep93xx_register_i2c(edb93xxa_i2c_board_info,
- ARRAY_SIZE(edb93xxa_i2c_board_info));
- } else if (machine_is_edb9302() || machine_is_edb9307()
- || machine_is_edb9312() || machine_is_edb9315()) {
- ep93xx_register_i2c(edb93xx_i2c_board_info,
- ARRAY_SIZE(edb93xx_i2c_board_info));
- }
-}
-
-
-/*************************************************************************
- * EDB93xx SPI peripheral handling
- *************************************************************************/
-static struct cs4271_platform_data edb93xx_cs4271_data = {
- .gpio_nreset = -EINVAL, /* filled in later */
-};
-
-static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
- {
- .modalias = "cs4271",
- .platform_data = &edb93xx_cs4271_data,
- .max_speed_hz = 6000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_3,
- },
-};
-
-static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = {
- .dev_id = "spi0",
- .table = {
- GPIO_LOOKUP("gpio-ep93xx.0", 6, "cs", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
- /* Intentionally left blank */
-};
-
-static void __init edb93xx_register_spi(void)
-{
- if (machine_is_edb9301() || machine_is_edb9302())
- edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
- else if (machine_is_edb9302a() || machine_is_edb9307a())
- edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
- else if (machine_is_edb9315a())
- edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
-
- gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
- ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
- ARRAY_SIZE(edb93xx_spi_board_info));
-}
-
-
-/*************************************************************************
- * EDB93xx I2S
- *************************************************************************/
-static struct platform_device edb93xx_audio_device = {
- .name = "edb93xx-audio",
- .id = -1,
-};
-
-static int __init edb93xx_has_audio(void)
-{
- return (machine_is_edb9301() || machine_is_edb9302() ||
- machine_is_edb9302a() || machine_is_edb9307a() ||
- machine_is_edb9315a());
-}
-
-static void __init edb93xx_register_i2s(void)
-{
- if (edb93xx_has_audio()) {
- ep93xx_register_i2s();
- platform_device_register(&edb93xx_audio_device);
- }
-}
-
-
-/*************************************************************************
- * EDB93xx pwm
- *************************************************************************/
-static void __init edb93xx_register_pwm(void)
-{
- if (machine_is_edb9301() ||
- machine_is_edb9302() || machine_is_edb9302a()) {
- /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
- ep93xx_register_pwm(0, 1);
- } else if (machine_is_edb9307() || machine_is_edb9307a()) {
- /* EP9307 only has pwm.0 (PWMOUT) */
- ep93xx_register_pwm(1, 0);
- } else {
- /* EP9312 and EP9315 have both */
- ep93xx_register_pwm(1, 1);
- }
-}
-
-
-/*************************************************************************
- * EDB93xx framebuffer
- *************************************************************************/
-static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
- .flags = 0,
-};
-
-static int __init edb93xx_has_fb(void)
-{
- /* These platforms have an ep93xx with video capability */
- return machine_is_edb9307() || machine_is_edb9307a() ||
- machine_is_edb9312() || machine_is_edb9315() ||
- machine_is_edb9315a();
-}
-
-static void __init edb93xx_register_fb(void)
-{
- if (!edb93xx_has_fb())
- return;
-
- if (machine_is_edb9307a() || machine_is_edb9315a())
- edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
- else
- edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
-
- ep93xx_register_fb(&edb93xxfb_info);
-}
-
-
-/*************************************************************************
- * EDB93xx IDE
- *************************************************************************/
-static int __init edb93xx_has_ide(void)
-{
- /*
- * Although EDB9312 and EDB9315 do have IDE capability, they have
- * INTRQ line wired as pull-up, which makes using IDE interface
- * problematic.
- */
- return machine_is_edb9312() || machine_is_edb9315() ||
- machine_is_edb9315a();
-}
-
-static void __init edb93xx_register_ide(void)
-{
- if (!edb93xx_has_ide())
- return;
-
- ep93xx_register_ide();
-}
-
-
-static void __init edb93xx_init_machine(void)
-{
- ep93xx_init_devices();
- edb93xx_register_flash();
- ep93xx_register_eth(&edb93xx_eth_data, 1);
- edb93xx_register_i2c();
- edb93xx_register_spi();
- edb93xx_register_i2s();
- edb93xx_register_pwm();
- edb93xx_register_fb();
- edb93xx_register_ide();
- ep93xx_register_adc();
-}
-
-
-#ifdef CONFIG_MACH_EDB9301
-MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
- /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
- /* Maintainer: George Kashperko <george@chas.com.ua> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302A
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
- /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307A
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
- /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9312
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
- /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315A
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = edb93xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h
deleted file mode 100644
index 8fa3646de0a4..000000000000
--- a/arch/arm/mach-ep93xx/ep93xx-regs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_EP93XX_REGS_H
-#define __ASM_ARCH_EP93XX_REGS_H
-
-/*
- * EP93xx linux memory map:
- *
- * virt phys size
- * fe800000 5M per-platform mappings
- * fed00000 80800000 2M APB
- * fef00000 80000000 1M AHB
- */
-
-#define EP93XX_AHB_PHYS_BASE 0x80000000
-#define EP93XX_AHB_VIRT_BASE 0xfef00000
-#define EP93XX_AHB_SIZE 0x00100000
-
-#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x))
-#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
-
-#define EP93XX_APB_PHYS_BASE 0x80800000
-#define EP93XX_APB_VIRT_BASE 0xfed00000
-#define EP93XX_APB_SIZE 0x00200000
-
-#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x))
-#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
-
-/* APB UARTs */
-#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000)
-#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
-
-#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000)
-#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
-
-#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
-#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
-
-#endif
diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h
deleted file mode 100644
index 7b46eb7e5507..000000000000
--- a/arch/arm/mach-ep93xx/gpio-ep93xx.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Include file for the EP93XX GPIO controller machine specifics */
-
-#ifndef __GPIO_EP93XX_H
-#define __GPIO_EP93XX_H
-
-#include "ep93xx-regs.h"
-
-#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000)
-#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
-#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
-#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
-
-/* GPIO port A. */
-#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B. */
-#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C. */
-#define EP93XX_GPIO_LINE_C(x) ((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D. */
-#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
-#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E. */
-#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F. */
-#define EP93XX_GPIO_LINE_F(x) ((x) + 16)
-#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G. */
-#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H. */
-#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
-#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-
-#endif /* __GPIO_EP93XX_H */
diff --git a/arch/arm/mach-ep93xx/hardware.h b/arch/arm/mach-ep93xx/hardware.h
deleted file mode 100644
index e7d850e04782..000000000000
--- a/arch/arm/mach-ep93xx/hardware.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/hardware.h
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "platform.h"
-
-/*
- * The EP93xx has two external crystal oscillators. To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks. The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE 14745600
-#define EP93XX_EXT_RTC_RATE 32768
-
-#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4)
-#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16)
-
-#endif
diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h
deleted file mode 100644
index 353201b90c66..000000000000
--- a/arch/arm/mach-ep93xx/irqs.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_VIC0 1
-
-#define IRQ_EP93XX_COMMRX (IRQ_EP93XX_VIC0 + 2)
-#define IRQ_EP93XX_COMMTX (IRQ_EP93XX_VIC0 + 3)
-#define IRQ_EP93XX_TIMER1 (IRQ_EP93XX_VIC0 + 4)
-#define IRQ_EP93XX_TIMER2 (IRQ_EP93XX_VIC0 + 5)
-#define IRQ_EP93XX_AACINTR (IRQ_EP93XX_VIC0 + 6)
-#define IRQ_EP93XX_DMAM2P0 (IRQ_EP93XX_VIC0 + 7)
-#define IRQ_EP93XX_DMAM2P1 (IRQ_EP93XX_VIC0 + 8)
-#define IRQ_EP93XX_DMAM2P2 (IRQ_EP93XX_VIC0 + 9)
-#define IRQ_EP93XX_DMAM2P3 (IRQ_EP93XX_VIC0 + 10)
-#define IRQ_EP93XX_DMAM2P4 (IRQ_EP93XX_VIC0 + 11)
-#define IRQ_EP93XX_DMAM2P5 (IRQ_EP93XX_VIC0 + 12)
-#define IRQ_EP93XX_DMAM2P6 (IRQ_EP93XX_VIC0 + 13)
-#define IRQ_EP93XX_DMAM2P7 (IRQ_EP93XX_VIC0 + 14)
-#define IRQ_EP93XX_DMAM2P8 (IRQ_EP93XX_VIC0 + 15)
-#define IRQ_EP93XX_DMAM2P9 (IRQ_EP93XX_VIC0 + 16)
-#define IRQ_EP93XX_DMAM2M0 (IRQ_EP93XX_VIC0 + 17)
-#define IRQ_EP93XX_DMAM2M1 (IRQ_EP93XX_VIC0 + 18)
-#define IRQ_EP93XX_GPIO0MUX (IRQ_EP93XX_VIC0 + 19)
-#define IRQ_EP93XX_GPIO1MUX (IRQ_EP93XX_VIC0 + 20)
-#define IRQ_EP93XX_GPIO2MUX (IRQ_EP93XX_VIC0 + 21)
-#define IRQ_EP93XX_GPIO3MUX (IRQ_EP93XX_VIC0 + 22)
-#define IRQ_EP93XX_UART1RX (IRQ_EP93XX_VIC0 + 23)
-#define IRQ_EP93XX_UART1TX (IRQ_EP93XX_VIC0 + 24)
-#define IRQ_EP93XX_UART2RX (IRQ_EP93XX_VIC0 + 25)
-#define IRQ_EP93XX_UART2TX (IRQ_EP93XX_VIC0 + 26)
-#define IRQ_EP93XX_UART3RX (IRQ_EP93XX_VIC0 + 27)
-#define IRQ_EP93XX_UART3TX (IRQ_EP93XX_VIC0 + 28)
-#define IRQ_EP93XX_KEY (IRQ_EP93XX_VIC0 + 29)
-#define IRQ_EP93XX_TOUCH (IRQ_EP93XX_VIC0 + 30)
-#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc
-
-#define IRQ_EP93XX_VIC1 (IRQ_EP93XX_VIC0 + 32)
-
-#define IRQ_EP93XX_EXT0 (IRQ_EP93XX_VIC1 + 0)
-#define IRQ_EP93XX_EXT1 (IRQ_EP93XX_VIC1 + 1)
-#define IRQ_EP93XX_EXT2 (IRQ_EP93XX_VIC1 + 2)
-#define IRQ_EP93XX_64HZ (IRQ_EP93XX_VIC1 + 3)
-#define IRQ_EP93XX_WATCHDOG (IRQ_EP93XX_VIC1 + 4)
-#define IRQ_EP93XX_RTC (IRQ_EP93XX_VIC1 + 5)
-#define IRQ_EP93XX_IRDA (IRQ_EP93XX_VIC1 + 6)
-#define IRQ_EP93XX_ETHERNET (IRQ_EP93XX_VIC1 + 7)
-#define IRQ_EP93XX_EXT3 (IRQ_EP93XX_VIC1 + 8)
-#define IRQ_EP93XX_PROG (IRQ_EP93XX_VIC1 + 9)
-#define IRQ_EP93XX_1HZ (IRQ_EP93XX_VIC1 + 10)
-#define IRQ_EP93XX_VSYNC (IRQ_EP93XX_VIC1 + 11)
-#define IRQ_EP93XX_VIDEO_FIFO (IRQ_EP93XX_VIC1 + 12)
-#define IRQ_EP93XX_SSP1RX (IRQ_EP93XX_VIC1 + 13)
-#define IRQ_EP93XX_SSP1TX (IRQ_EP93XX_VIC1 + 14)
-#define IRQ_EP93XX_GPIO4MUX (IRQ_EP93XX_VIC1 + 15)
-#define IRQ_EP93XX_GPIO5MUX (IRQ_EP93XX_VIC1 + 16)
-#define IRQ_EP93XX_GPIO6MUX (IRQ_EP93XX_VIC1 + 17)
-#define IRQ_EP93XX_GPIO7MUX (IRQ_EP93XX_VIC1 + 18)
-#define IRQ_EP93XX_TIMER3 (IRQ_EP93XX_VIC1 + 19)
-#define IRQ_EP93XX_UART1 (IRQ_EP93XX_VIC1 + 20)
-#define IRQ_EP93XX_SSP (IRQ_EP93XX_VIC1 + 21)
-#define IRQ_EP93XX_UART2 (IRQ_EP93XX_VIC1 + 22)
-#define IRQ_EP93XX_UART3 (IRQ_EP93XX_VIC1 + 23)
-#define IRQ_EP93XX_USB (IRQ_EP93XX_VIC1 + 24)
-#define IRQ_EP93XX_ETHERNET_PME (IRQ_EP93XX_VIC1 + 25)
-#define IRQ_EP93XX_DSP (IRQ_EP93XX_VIC1 + 26)
-#define IRQ_EP93XX_GPIO_AB (IRQ_EP93XX_VIC1 + 27)
-#define IRQ_EP93XX_SAI (IRQ_EP93XX_VIC1 + 28)
-#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
-
-#define NR_EP93XX_IRQS (IRQ_EP93XX_VIC1 + 32 + 24)
-
-#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS 32
-
-#endif
diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h
deleted file mode 100644
index 5fb1b919133f..000000000000
--- a/arch/arm/mach-ep93xx/platform.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/platform.h
- */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/platform_data/eth-ep93xx.h>
-#include <linux/reboot.h>
-
-struct device;
-struct i2c_board_info;
-struct spi_board_info;
-struct platform_device;
-struct ep93xxfb_mach_info;
-struct ep93xx_keypad_platform_data;
-struct ep93xx_spi_info;
-
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-
-void ep93xx_register_flash(unsigned int width,
- resource_size_t start, resource_size_t size);
-
-void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
-void ep93xx_register_spi(struct ep93xx_spi_info *info,
- struct spi_board_info *devices, int num);
-void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
-void ep93xx_register_pwm(int pwm0, int pwm1);
-void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
-void ep93xx_register_i2s(void);
-void ep93xx_register_ac97(void);
-void ep93xx_register_ide(void);
-void ep93xx_register_adc(void);
-
-struct device *ep93xx_init_devices(void);
-extern void ep93xx_timer_init(void);
-
-void ep93xx_restart(enum reboot_mode, const char *);
-
-#endif
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
deleted file mode 100644
index 3245ebbd5069..000000000000
--- a/arch/arm/mach-ep93xx/soc.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-ep93xx/soc.h
- *
- * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com>
- * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com>
- */
-
-#ifndef _EP93XX_SOC_H
-#define _EP93XX_SOC_H
-
-#include "ep93xx-regs.h"
-#include "irqs.h"
-
-/*
- * EP93xx Physical Memory Map:
- *
- * The ASDO pin is sampled at system reset to select a synchronous or
- * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
- * the synchronous boot mode is selected. When ASDO is "0" (i.e
- * pulled-down) the asynchronous boot mode is selected.
- *
- * In synchronous boot mode nSDCE3 is decoded starting at physical address
- * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
- * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
- * decoded at 0xf0000000.
- *
- * There is known errata for the EP93xx dealing with External Memory
- * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
- * Guidelines" for more information. This document can be found at:
- *
- * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
-
-#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
-#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
-#define EP93XX_CS1_PHYS_BASE 0x10000000
-#define EP93XX_CS2_PHYS_BASE 0x20000000
-#define EP93XX_CS3_PHYS_BASE 0x30000000
-#define EP93XX_PCMCIA_PHYS_BASE 0x40000000
-#define EP93XX_CS6_PHYS_BASE 0x60000000
-#define EP93XX_CS7_PHYS_BASE 0x70000000
-#define EP93XX_SDCE0_PHYS_BASE 0xc0000000
-#define EP93XX_SDCE1_PHYS_BASE 0xd0000000
-#define EP93XX_SDCE2_PHYS_BASE 0xe0000000
-#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
-#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
-
-/* AHB peripherals */
-#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
-
-#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000)
-#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
-
-#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000)
-#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
-
-#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000)
-#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
-
-#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
-
-#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000)
-
-#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000)
-
-#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
-
-#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000)
-#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
-
-#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
-
-#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000)
-
-/* APB peripherals */
-#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
-
-#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000)
-#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
-
-#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
-
-#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000)
-#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
-
-#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000)
-#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000)
-
-#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
-
-#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000)
-#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
-
-#define EP93XX_ADC_PHYS_BASE EP93XX_APB_PHYS(0x00100000)
-#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
-
-#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000)
-#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
-
-#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000)
-#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
-
-#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000)
-#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
-
-/* System controller */
-#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
-#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
-#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31)
-#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29)
-#define EP93XX_SYSCON_PWRCNT_USH_EN 28
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 27
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 26
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 25
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 24
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 23
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 22
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 21
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 20
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 19
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 18
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 17
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 16
-#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
-#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23)
-#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19)
-#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18)
-#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31)
-#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30)
-#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29)
-#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28)
-#define EP93XX_SYSCON_DEVCFG_GONK (1<<27)
-#define EP93XX_SYSCON_DEVCFG_TONG (1<<26)
-#define EP93XX_SYSCON_DEVCFG_MONG (1<<25)
-#define EP93XX_SYSCON_DEVCFG_U3EN 24
-#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23)
-#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22)
-#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21)
-#define EP93XX_SYSCON_DEVCFG_U2EN 20
-#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19)
-#define EP93XX_SYSCON_DEVCFG_U1EN 18
-#define EP93XX_SYSCON_DEVCFG_TIN (1<<17)
-#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15)
-#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14)
-#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13)
-#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12)
-#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11)
-#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10)
-#define EP93XX_SYSCON_DEVCFG_PONG (1<<9)
-#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8)
-#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7)
-#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6)
-#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4)
-#define EP93XX_SYSCON_DEVCFG_RAS (1<<3)
-#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2)
-#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1)
-#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0)
-#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84)
-#define EP93XX_SYSCON_CLKDIV_ENABLE 15
-#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14)
-#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13)
-#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8
-#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c)
-#define EP93XX_SYSCON_I2SCLKDIV_SENA 31
-#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29)
-#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19)
-#define EP93XX_I2SCLKDIV_SDIV (1 << 16)
-#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17)
-#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN 31
-#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV 16
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN 15
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
-#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c)
-#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000)
-#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28)
-#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8)
-#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7)
-#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6)
-#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5)
-#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4)
-#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
-#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
-#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
-#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
-
-/* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
-
-static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-{
- ep93xx_devcfg_set_clear(bits, 0x00);
-}
-
-static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
-{
- ep93xx_devcfg_set_clear(0x00, bits);
-}
-
-#endif /* _EP93XX_SOC_H */
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
deleted file mode 100644
index a9efa7bc2fa1..000000000000
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/sched_clock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/mach/time.h>
-#include "soc.h"
-#include "platform.h"
-
-/*************************************************************************
- * Timer handling for EP93xx
- *************************************************************************
- * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
- * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
- * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
- * is free-running, and can't generate interrupts.
- *
- * The 508 kHz timers are ideal for use for the timer interrupt, as the
- * most common values of HZ divide 508 kHz nicely. We pick the 32 bit
- * timer (timer 3) to get as long sleep intervals as possible when using
- * CONFIG_NO_HZ.
- *
- * The higher clock rate of timer 4 makes it a better choice than the
- * other timers for use as clock source and for sched_clock(), providing
- * a stable 40 bit time base.
- *************************************************************************
- */
-#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
-#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
-#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
-#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
-#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_TIMER123_RATE 508469
-#define EP93XX_TIMER4_RATE 983040
-
-static u64 notrace ep93xx_read_sched_clock(void)
-{
- u64 ret;
-
- ret = readl(EP93XX_TIMER4_VALUE_LOW);
- ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
- return ret;
-}
-
-static u64 ep93xx_clocksource_read(struct clocksource *c)
-{
- u64 ret;
-
- ret = readl(EP93XX_TIMER4_VALUE_LOW);
- ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32);
- return (u64) ret;
-}
-
-static int ep93xx_clkevt_set_next_event(unsigned long next,
- struct clock_event_device *evt)
-{
- /* Default mode: periodic, off, 508 kHz */
- u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
- EP93XX_TIMER123_CONTROL_CLKSEL;
-
- /* Clear timer */
- writel(tmode, EP93XX_TIMER3_CONTROL);
-
- /* Set next event */
- writel(next, EP93XX_TIMER3_LOAD);
- writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
- EP93XX_TIMER3_CONTROL);
- return 0;
-}
-
-
-static int ep93xx_clkevt_shutdown(struct clock_event_device *evt)
-{
- /* Disable timer */
- writel(0, EP93XX_TIMER3_CONTROL);
-
- return 0;
-}
-
-static struct clock_event_device ep93xx_clockevent = {
- .name = "timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_state_shutdown = ep93xx_clkevt_shutdown,
- .set_state_oneshot = ep93xx_clkevt_shutdown,
- .tick_resume = ep93xx_clkevt_shutdown,
- .set_next_event = ep93xx_clkevt_set_next_event,
- .rating = 300,
-};
-
-static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- /* Writing any value clears the timer interrupt */
- writel(1, EP93XX_TIMER3_CLEAR);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-void __init ep93xx_timer_init(void)
-{
- int irq = IRQ_EP93XX_TIMER3;
- unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
-
- /* Enable and register clocksource and sched_clock on timer 4 */
- writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
- EP93XX_TIMER4_VALUE_HIGH);
- clocksource_mmio_init(NULL, "timer4",
- EP93XX_TIMER4_RATE, 200, 40,
- ep93xx_clocksource_read);
- sched_clock_register(ep93xx_read_sched_clock, 40,
- EP93XX_TIMER4_RATE);
-
- /* Set up clockevent on timer 3 */
- if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
- &ep93xx_clockevent))
- pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
- clockevents_config_and_register(&ep93xx_clockevent,
- EP93XX_TIMER123_RATE,
- 1,
- 0xffffffffU);
-}
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
deleted file mode 100644
index 0bbdf587c685..000000000000
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/ts72xx.c
- * Technologic Systems TS72xx SBC support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/platnand.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio/machine.h>
-
-#include "gpio-ep93xx.h"
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-#include "ts72xx.h"
-
-/*************************************************************************
- * IO map
- *************************************************************************/
-static struct map_desc ts72xx_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE,
- .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
- .length = TS72XX_MODEL_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE,
- .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
- .length = TS72XX_OPTIONS_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE,
- .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
- .length = TS72XX_OPTIONS2_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE,
- .pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE),
- .length = TS72XX_CPLDVER_SIZE,
- .type = MT_DEVICE,
- }
-};
-
-static void __init ts72xx_map_io(void)
-{
- ep93xx_map_io();
- iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
-}
-
-
-/*************************************************************************
- * NAND flash
- *************************************************************************/
-#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */
-#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */
-
-static void ts72xx_nand_hwcontrol(struct nand_chip *chip,
- int cmd, unsigned int ctrl)
-{
- if (ctrl & NAND_CTRL_CHANGE) {
- void __iomem *addr = chip->legacy.IO_ADDR_R;
- unsigned char bits;
-
- addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE);
-
- bits = __raw_readb(addr) & ~0x07;
- bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */
- bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */
- bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */
-
- __raw_writeb(bits, addr);
- }
-
- if (cmd != NAND_CMD_NONE)
- __raw_writeb(cmd, chip->legacy.IO_ADDR_W);
-}
-
-static int ts72xx_nand_device_ready(struct nand_chip *chip)
-{
- void __iomem *addr = chip->legacy.IO_ADDR_R;
-
- addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
-
- return !!(__raw_readb(addr) & 0x20);
-}
-
-#define TS72XX_BOOTROM_PART_SIZE (SZ_16K)
-#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M)
-
-static struct mtd_partition ts72xx_nand_parts[] = {
- {
- .name = "TS-BOOTROM",
- .offset = 0,
- .size = TS72XX_BOOTROM_PART_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "Linux",
- .offset = MTDPART_OFS_RETAIN,
- .size = TS72XX_REDBOOT_PART_SIZE,
- /* leave so much for last partition */
- }, {
- .name = "RedBoot",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
-};
-
-static struct platform_nand_data ts72xx_nand_data = {
- .chip = {
- .nr_chips = 1,
- .chip_offset = 0,
- .chip_delay = 15,
- },
- .ctrl = {
- .cmd_ctrl = ts72xx_nand_hwcontrol,
- .dev_ready = ts72xx_nand_device_ready,
- },
-};
-
-static struct resource ts72xx_nand_resource[] = {
- {
- .start = 0, /* filled in later */
- .end = 0, /* filled in later */
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ts72xx_nand_flash = {
- .name = "gen_nand",
- .id = -1,
- .dev.platform_data = &ts72xx_nand_data,
- .resource = ts72xx_nand_resource,
- .num_resources = ARRAY_SIZE(ts72xx_nand_resource),
-};
-
-static void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
- resource_size_t start)
-{
- /*
- * TS7200 has NOR flash all other TS72xx board have NAND flash.
- */
- if (board_is_ts7200()) {
- ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
- } else {
- ts72xx_nand_resource[0].start = start;
- ts72xx_nand_resource[0].end = start + SZ_16M - 1;
-
- ts72xx_nand_data.chip.partitions = parts;
- ts72xx_nand_data.chip.nr_partitions = n;
-
- platform_device_register(&ts72xx_nand_flash);
- }
-}
-
-/*************************************************************************
- * RTC M48T86
- *************************************************************************/
-#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000)
-#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000)
-
-static struct resource ts72xx_rtc_resources[] = {
- DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01),
- DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01),
-};
-
-static struct platform_device ts72xx_rtc_device = {
- .name = "rtc-m48t86",
- .id = -1,
- .resource = ts72xx_rtc_resources,
- .num_resources = ARRAY_SIZE(ts72xx_rtc_resources),
-};
-
-/*************************************************************************
- * Watchdog (in CPLD)
- *************************************************************************/
-#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000)
-#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000)
-
-static struct resource ts72xx_wdt_resources[] = {
- DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01),
- DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01),
-};
-
-static struct platform_device ts72xx_wdt_device = {
- .name = "ts72xx-wdt",
- .id = -1,
- .resource = ts72xx_wdt_resources,
- .num_resources = ARRAY_SIZE(ts72xx_wdt_resources),
-};
-
-/*************************************************************************
- * ETH
- *************************************************************************/
-static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
- .phy_id = 1,
-};
-
-/*************************************************************************
- * SPI SD/MMC host
- *************************************************************************/
-#define BK3_EN_SDCARD_PHYS_BASE 0x12400000
-#define BK3_EN_SDCARD_PWR 0x0
-#define BK3_DIS_SDCARD_PWR 0x0C
-static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd)
-{
- void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K);
-
- if (!pwr_sd) {
- pr_err("Failed to enable SD card power!");
- return;
- }
-
- pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__,
- !!vdd ? "ON" : "OFF", vdd);
-
- if (!!vdd)
- __raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd);
- else
- __raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd);
-
- iounmap(pwr_sd);
-}
-
-static struct mmc_spi_platform_data bk3_spi_mmc_data = {
- .detect_delay = 500,
- .powerup_msecs = 100,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .caps = MMC_CAP_NONREMOVABLE,
- .setpower = bk3_mmc_spi_setpower,
-};
-
-/*************************************************************************
- * SPI Bus - SD card access
- *************************************************************************/
-static struct spi_board_info bk3_spi_board_info[] __initdata = {
- {
- .modalias = "mmc_spi",
- .platform_data = &bk3_spi_mmc_data,
- .max_speed_hz = 7.4E6,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- },
-};
-
-/*
- * This is a stub -> the FGPIO[3] pin is not connected on the schematic
- * The all work is performed automatically by !SPI_FRAME (SFRM1) and
- * goes through CPLD
- */
-static struct gpiod_lookup_table bk3_spi_cs_gpio_table = {
- .dev_id = "spi0",
- .table = {
- GPIO_LOOKUP("gpio-ep93xx.5", 3, "cs", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct ep93xx_spi_info bk3_spi_master __initdata = {
- .use_dma = 1,
-};
-
-/*************************************************************************
- * TS72XX support code
- *************************************************************************/
-#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
-
-/* Relative to EP93XX_CS1_PHYS_BASE */
-#define TS73XX_FPGA_LOADER_BASE 0x03c00000
-
-static struct resource ts73xx_fpga_resources[] = {
- {
- .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE,
- .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ts73xx_fpga_device = {
- .name = "ts73xx-fpga-mgr",
- .id = -1,
- .resource = ts73xx_fpga_resources,
- .num_resources = ARRAY_SIZE(ts73xx_fpga_resources),
-};
-
-#endif
-
-/*************************************************************************
- * SPI Bus
- *************************************************************************/
-static struct spi_board_info ts72xx_spi_devices[] __initdata = {
- {
- .modalias = "tmp122",
- .max_speed_hz = 2 * 1000 * 1000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = {
- .dev_id = "spi0",
- .table = {
- /* DIO_17 */
- GPIO_LOOKUP("gpio-ep93xx.5", 2, "cs", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct ep93xx_spi_info ts72xx_spi_info __initdata = {
- /* Intentionally left blank */
-};
-
-static void __init ts72xx_init_machine(void)
-{
- ep93xx_init_devices();
- ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts),
- is_ts9420_installed() ?
- EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE);
- platform_device_register(&ts72xx_rtc_device);
- platform_device_register(&ts72xx_wdt_device);
-
- ep93xx_register_eth(&ts72xx_eth_data, 1);
-#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
- if (board_is_ts7300())
- platform_device_register(&ts73xx_fpga_device);
-#endif
- gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table);
- ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
- ARRAY_SIZE(ts72xx_spi_devices));
-}
-
-MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ts72xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = ts72xx_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
-
-/*************************************************************************
- * EP93xx I2S audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_i2s_resource[] = {
- DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
- DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"),
-};
-
-static struct platform_device ep93xx_i2s_device = {
- .name = "ep93xx-spilink-i2s",
- .id = -1,
- .num_resources = ARRAY_SIZE(ep93xx_i2s_resource),
- .resource = ep93xx_i2s_resource,
-};
-
-/*************************************************************************
- * BK3 support code
- *************************************************************************/
-static struct mtd_partition bk3_nand_parts[] = {
- {
- .name = "System",
- .offset = 0x00000000,
- .size = 0x01e00000,
- }, {
- .name = "Data",
- .offset = 0x01e00000,
- .size = 0x05f20000
- }, {
- .name = "RedBoot",
- .offset = 0x07d20000,
- .size = 0x002e0000,
- .mask_flags = MTD_WRITEABLE, /* force RO */
- },
-};
-
-static void __init bk3_init_machine(void)
-{
- ep93xx_init_devices();
-
- ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts),
- EP93XX_CS6_PHYS_BASE);
-
- ep93xx_register_eth(&ts72xx_eth_data, 1);
-
- gpiod_add_lookup_table(&bk3_spi_cs_gpio_table);
- ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info,
- ARRAY_SIZE(bk3_spi_board_info));
-
- /* Configure ep93xx's I2S to use AC97 pins */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
- platform_device_register(&ep93xx_i2s_device);
-}
-
-MACHINE_START(BK3, "Liebherr controller BK3.1")
- /* Maintainer: Lukasz Majewski <lukma@denx.de> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS,
- .map_io = ts72xx_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = bk3_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h
deleted file mode 100644
index 00b4941d29c9..000000000000
--- a/arch/arm/mach-ep93xx/ts72xx.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/ts72xx.h
- */
-
-/*
- * TS72xx memory map:
- *
- * virt phys size
- * febff000 22000000 4K model number register (bits 0-2)
- * febfe000 22400000 4K options register
- * febfd000 22800000 4K options register #2
- * febfc000 23400000 4K CPLD version register
- */
-
-#ifndef __TS72XX_H_
-#define __TS72XX_H_
-
-#define TS72XX_MODEL_PHYS_BASE 0x22000000
-#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000)
-#define TS72XX_MODEL_SIZE 0x00001000
-
-#define TS72XX_MODEL_TS7200 0x00
-#define TS72XX_MODEL_TS7250 0x01
-#define TS72XX_MODEL_TS7260 0x02
-#define TS72XX_MODEL_TS7300 0x03
-#define TS72XX_MODEL_TS7400 0x04
-#define TS72XX_MODEL_MASK 0x07
-
-
-#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000)
-#define TS72XX_OPTIONS_SIZE 0x00001000
-
-#define TS72XX_OPTIONS_COM2_RS485 0x02
-#define TS72XX_OPTIONS_MAX197 0x01
-
-
-#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000)
-#define TS72XX_OPTIONS2_SIZE 0x00001000
-
-#define TS72XX_OPTIONS2_TS9420 0x04
-#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
-
-#define TS72XX_CPLDVER_PHYS_BASE 0x23400000
-#define TS72XX_CPLDVER_VIRT_BASE IOMEM(0xfebfc000)
-#define TS72XX_CPLDVER_SIZE 0x00001000
-
-#ifndef __ASSEMBLY__
-
-static inline int ts72xx_model(void)
-{
- return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
-}
-
-static inline int board_is_ts7200(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7200;
-}
-
-static inline int board_is_ts7250(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7250;
-}
-
-static inline int board_is_ts7260(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7260;
-}
-
-static inline int board_is_ts7300(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7300;
-}
-
-static inline int board_is_ts7400(void)
-{
- return ts72xx_model() == TS72XX_MODEL_TS7400;
-}
-
-static inline int is_max197_installed(void)
-{
- return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
- TS72XX_OPTIONS_MAX197);
-}
-
-static inline int is_ts9420_installed(void)
-{
- return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
- TS72XX_OPTIONS2_TS9420);
-}
-#endif
-#endif /* __TS72XX_H_ */
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
deleted file mode 100644
index 020223b0be2b..000000000000
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/vision_ep9307.c
- * Vision Engraving Systems EP9307 SoM support.
- *
- * Copyright (C) 2008-2011 Vision Engraving Systems
- * H Hartley Sweeten <hsweeten@visionengravers.com>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-
-#include <sound/cs4271.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Static I/O mappings for the FPGA
- *************************************************************************/
-#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE
-#define VISION_VIRT_BASE 0xfebff000
-
-static struct map_desc vision_io_desc[] __initdata = {
- {
- .virtual = VISION_VIRT_BASE,
- .pfn = __phys_to_pfn(VISION_PHYS_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void __init vision_map_io(void)
-{
- ep93xx_map_io();
-
- iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
-}
-
-/*************************************************************************
- * Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data vision_eth_data __initdata = {
- .phy_id = 1,
-};
-
-/*************************************************************************
- * Framebuffer
- *************************************************************************/
-#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1
-
-static int vision_lcd_setup(struct platform_device *pdev)
-{
- int err;
-
- err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
- dev_name(&pdev->dev));
- if (err)
- return err;
-
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
- EP93XX_SYSCON_DEVCFG_RASONP3 |
- EP93XX_SYSCON_DEVCFG_EXVC);
-
- return 0;
-}
-
-static void vision_lcd_teardown(struct platform_device *pdev)
-{
- gpio_free(VISION_LCD_ENABLE);
-}
-
-static void vision_lcd_blank(int blank_mode, struct fb_info *info)
-{
- if (blank_mode)
- gpio_set_value(VISION_LCD_ENABLE, 0);
- else
- gpio_set_value(VISION_LCD_ENABLE, 1);
-}
-
-static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
- .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
- .setup = vision_lcd_setup,
- .teardown = vision_lcd_teardown,
- .blank = vision_lcd_blank,
-};
-
-
-/*************************************************************************
- * GPIO Expanders
- *************************************************************************/
-#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1)
-#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16)
-#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16)
-#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16)
-
-static struct pca953x_platform_data pca953x_74_gpio_data = {
- .gpio_base = PCA9539_74_GPIO_BASE,
- .irq_base = EP93XX_BOARD_IRQ(0),
-};
-
-static struct pca953x_platform_data pca953x_75_gpio_data = {
- .gpio_base = PCA9539_75_GPIO_BASE,
- .irq_base = -1,
-};
-
-static struct pca953x_platform_data pca953x_76_gpio_data = {
- .gpio_base = PCA9539_76_GPIO_BASE,
- .irq_base = -1,
-};
-
-static struct pca953x_platform_data pca953x_77_gpio_data = {
- .gpio_base = PCA9539_77_GPIO_BASE,
- .irq_base = -1,
-};
-
-/*************************************************************************
- * I2C Bus
- *************************************************************************/
-
-static struct i2c_board_info vision_i2c_info[] __initdata = {
- {
- I2C_BOARD_INFO("isl1208", 0x6f),
- .irq = IRQ_EP93XX_EXT1,
- }, {
- I2C_BOARD_INFO("pca9539", 0x74),
- .platform_data = &pca953x_74_gpio_data,
- }, {
- I2C_BOARD_INFO("pca9539", 0x75),
- .platform_data = &pca953x_75_gpio_data,
- }, {
- I2C_BOARD_INFO("pca9539", 0x76),
- .platform_data = &pca953x_76_gpio_data,
- }, {
- I2C_BOARD_INFO("pca9539", 0x77),
- .platform_data = &pca953x_77_gpio_data,
- },
-};
-
-/*************************************************************************
- * SPI CS4271 Audio Codec
- *************************************************************************/
-static struct cs4271_platform_data vision_cs4271_data = {
- .gpio_nreset = EP93XX_GPIO_LINE_H(2),
-};
-
-/*************************************************************************
- * SPI Flash
- *************************************************************************/
-static struct mtd_partition vision_spi_flash_partitions[] = {
- {
- .name = "SPI bootstrap",
- .offset = 0,
- .size = SZ_4K,
- }, {
- .name = "Bootstrap config",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4K,
- }, {
- .name = "System config",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct flash_platform_data vision_spi_flash_data = {
- .name = "SPI Flash",
- .parts = vision_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions),
-};
-
-/*************************************************************************
- * SPI SD/MMC host
- *************************************************************************/
-static struct mmc_spi_platform_data vision_spi_mmc_data = {
- .detect_delay = 100,
- .powerup_msecs = 100,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
-};
-
-static struct gpiod_lookup_table vision_spi_mmc_gpio_table = {
- .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */
- .table = {
- /* Card detect */
- GPIO_LOOKUP_IDX("gpio-ep93xx.1", 7, NULL, 0, GPIO_ACTIVE_LOW),
- /* Write protect */
- GPIO_LOOKUP_IDX("gpio-ep93xx.5", 0, NULL, 1, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/*************************************************************************
- * SPI Bus
- *************************************************************************/
-static struct spi_board_info vision_spi_board_info[] __initdata = {
- {
- .modalias = "cs4271",
- .platform_data = &vision_cs4271_data,
- .max_speed_hz = 6000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_3,
- }, {
- .modalias = "sst25l",
- .platform_data = &vision_spi_flash_data,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_3,
- }, {
- .modalias = "mmc_spi",
- .platform_data = &vision_spi_mmc_data,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 2,
- .mode = SPI_MODE_3,
- },
-};
-
-static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
- .dev_id = "spi0",
- .table = {
- GPIO_LOOKUP_IDX("gpio-ep93xx.0", 6, "cs", 0, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("gpio-ep93xx.0", 7, "cs", 1, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("gpio-ep93xx.6", 2, "cs", 2, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct ep93xx_spi_info vision_spi_master __initdata = {
- .use_dma = 1,
-};
-
-/*************************************************************************
- * I2S Audio
- *************************************************************************/
-static struct platform_device vision_audio_device = {
- .name = "edb93xx-audio",
- .id = -1,
-};
-
-static void __init vision_register_i2s(void)
-{
- ep93xx_register_i2s();
- platform_device_register(&vision_audio_device);
-}
-
-/*************************************************************************
- * Machine Initialization
- *************************************************************************/
-static void __init vision_init_machine(void)
-{
- ep93xx_init_devices();
- ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
- ep93xx_register_eth(&vision_eth_data, 1);
- ep93xx_register_fb(&ep93xxfb_info);
- ep93xx_register_pwm(1, 0);
-
- /*
- * Request the gpio expander's interrupt gpio line now to prevent
- * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
- */
- if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
- "pca9539:74"))
- pr_warn("cannot request interrupt gpio for pca9539:74\n");
-
- vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
-
- ep93xx_register_i2c(vision_i2c_info,
- ARRAY_SIZE(vision_i2c_info));
- gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
- gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
- ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
- ARRAY_SIZE(vision_spi_board_info));
- vision_register_i2s();
-}
-
-MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
- /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .atag_offset = 0x100,
- .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
- .map_io = vision_map_io,
- .init_irq = ep93xx_init_irq,
- .init_time = ep93xx_timer_init,
- .init_machine = vision_init_machine,
- .restart = ep93xx_restart,
-MACHINE_END
diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h
deleted file mode 100644
index b439f2a896e0..000000000000
--- a/include/linux/platform_data/spi-ep93xx.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_EP93XX_SPI_H
-#define __ASM_MACH_EP93XX_SPI_H
-
-struct spi_device;
-
-/**
- * struct ep93xx_spi_info - EP93xx specific SPI descriptor
- * @use_dma: use DMA for the transfers
- */
-struct ep93xx_spi_info {
- bool use_dma;
-};
-
-#endif /* __ASM_MACH_EP93XX_SPI_H */
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 38/40] ARM: ep93xx: soc: drop defines
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (36 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 37/40] ARM: ep93xx: delete all boardfiles Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 39/40] ASoC: cirrus: edb93xx: Delete driver Nikita Shubin via B4 Relay
` (3 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Nikita Shubin, Linus Walleij, Dmitry Torokhov,
Uwe Kleine-König, Sergey Shtylyov
Cc: Andy Shevchenko, Thierry Reding, linux-kernel, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Remove unnecessary defines, as we dropped board files.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
include/linux/platform_data/eth-ep93xx.h | 10 ---------
include/linux/platform_data/keypad-ep93xx.h | 32 -----------------------------
include/linux/soc/cirrus/ep93xx.h | 13 ------------
3 files changed, 55 deletions(-)
diff --git a/include/linux/platform_data/eth-ep93xx.h b/include/linux/platform_data/eth-ep93xx.h
deleted file mode 100644
index 8eef637a804d..000000000000
--- a/include/linux/platform_data/eth-ep93xx.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_PLATFORM_DATA_ETH_EP93XX
-#define _LINUX_PLATFORM_DATA_ETH_EP93XX
-
-struct ep93xx_eth_data {
- unsigned char dev_addr[6];
- unsigned char phy_id;
-};
-
-#endif
diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h
deleted file mode 100644
index 3054fced8509..000000000000
--- a/include/linux/platform_data/keypad-ep93xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __KEYPAD_EP93XX_H
-#define __KEYPAD_EP93XX_H
-
-struct matrix_keymap_data;
-
-/* flags for the ep93xx_keypad driver */
-#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */
-#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */
-#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */
-#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */
-#define EP93XX_KEYPAD_AUTOREPEAT (1<<4) /* enable key autorepeat */
-
-/**
- * struct ep93xx_keypad_platform_data - platform specific device structure
- * @keymap_data: pointer to &matrix_keymap_data
- * @debounce: debounce start count; terminal count is 0xff
- * @prescale: row/column counter pre-scaler load value
- * @flags: see above
- */
-struct ep93xx_keypad_platform_data {
- struct matrix_keymap_data *keymap_data;
- unsigned int debounce;
- unsigned int prescale;
- unsigned int flags;
- unsigned int clk_rate;
-};
-
-#define EP93XX_MATRIX_ROWS (8)
-#define EP93XX_MATRIX_COLS (8)
-
-#endif /* __KEYPAD_EP93XX_H */
diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h
index da8bdfc36526..a9b8d2709797 100644
--- a/include/linux/soc/cirrus/ep93xx.h
+++ b/include/linux/soc/cirrus/ep93xx.h
@@ -2,7 +2,6 @@
#ifndef _SOC_EP93XX_H
#define _SOC_EP93XX_H
-struct platform_device;
struct regmap;
enum ep93xx_soc_model {
@@ -36,16 +35,4 @@ struct ep93xx_regmap_adev {
#define to_ep93xx_regmap_adev(_adev) \
container_of((_adev), struct ep93xx_regmap_adev, adev)
-#ifdef CONFIG_ARCH_EP93XX
-int ep93xx_i2s_acquire(void);
-void ep93xx_i2s_release(void);
-unsigned int ep93xx_chip_revision(void);
-
-#else
-static inline int ep93xx_i2s_acquire(void) { return 0; }
-static inline void ep93xx_i2s_release(void) {}
-static inline unsigned int ep93xx_chip_revision(void) { return 0; }
-
-#endif
-
#endif
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 39/40] ASoC: cirrus: edb93xx: Delete driver
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (37 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 38/40] ARM: ep93xx: soc: drop defines Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 40/40] dma: cirrus: remove platform code Nikita Shubin via B4 Relay
` (2 subsequent siblings)
41 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai,
Alexander Sverdlin, Arnd Bergmann, Nikita Shubin,
Uwe Kleine-König, Nicolas Ferre, Kuninori Morimoto
Cc: linux-kernel, linux-sound, Arnd Bergmann
From: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Can be replaced with "simple-audio-card" for the rates up to 50kHz, refer
to commit "ARM: dts: ep93xx: Add EDB9302 DT".
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
sound/soc/cirrus/Kconfig | 9 ----
sound/soc/cirrus/Makefile | 4 --
sound/soc/cirrus/edb93xx.c | 117 ---------------------------------------------
3 files changed, 130 deletions(-)
diff --git a/sound/soc/cirrus/Kconfig b/sound/soc/cirrus/Kconfig
index 38a83c4dcc2d..97def4e53fbc 100644
--- a/sound/soc/cirrus/Kconfig
+++ b/sound/soc/cirrus/Kconfig
@@ -31,12 +31,3 @@ config SND_EP93XX_SOC_I2S_WATCHDOG
endif # if SND_EP93XX_SOC_I2S
-config SND_EP93XX_SOC_EDB93XX
- tristate "SoC Audio support for Cirrus Logic EDB93xx boards"
- depends on SND_EP93XX_SOC && (MACH_EDB9301 || MACH_EDB9302 || MACH_EDB9302A || MACH_EDB9307A || MACH_EDB9315A)
- select SND_EP93XX_SOC_I2S
- select SND_SOC_CS4271_I2C if I2C
- select SND_SOC_CS4271_SPI if SPI_MASTER
- help
- Say Y or M here if you want to add support for I2S audio on the
- Cirrus Logic EDB93xx boards.
diff --git a/sound/soc/cirrus/Makefile b/sound/soc/cirrus/Makefile
index 19a86daad660..5916c03888cb 100644
--- a/sound/soc/cirrus/Makefile
+++ b/sound/soc/cirrus/Makefile
@@ -6,7 +6,3 @@ snd-soc-ep93xx-i2s-objs := ep93xx-i2s.o
obj-$(CONFIG_SND_EP93XX_SOC) += snd-soc-ep93xx.o
obj-$(CONFIG_SND_EP93XX_SOC_I2S) += snd-soc-ep93xx-i2s.o
-# EP93XX Machine Support
-snd-soc-edb93xx-objs := edb93xx.o
-
-obj-$(CONFIG_SND_EP93XX_SOC_EDB93XX) += snd-soc-edb93xx.o
diff --git a/sound/soc/cirrus/edb93xx.c b/sound/soc/cirrus/edb93xx.c
deleted file mode 100644
index 6b6817256331..000000000000
--- a/sound/soc/cirrus/edb93xx.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SoC audio for EDB93xx
- *
- * Copyright (c) 2010 Alexander Sverdlin <subaparts@yandex.ru>
- *
- * This driver support CS4271 codec being master or slave, working
- * in control port mode, connected either via SPI or I2C.
- * The data format accepted is I2S or left-justified.
- * DAPM support not implemented.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/soc/cirrus/ep93xx.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <asm/mach-types.h>
-
-static int edb93xx_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
- struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
- int err;
- unsigned int mclk_rate;
- unsigned int rate = params_rate(params);
-
- /*
- * According to CS4271 datasheet we use MCLK/LRCK=256 for
- * rates below 50kHz and 128 for higher sample rates
- */
- if (rate < 50000)
- mclk_rate = rate * 64 * 4;
- else
- mclk_rate = rate * 64 * 2;
-
- err = snd_soc_dai_set_sysclk(codec_dai, 0, mclk_rate,
- SND_SOC_CLOCK_IN);
- if (err)
- return err;
-
- return snd_soc_dai_set_sysclk(cpu_dai, 0, mclk_rate,
- SND_SOC_CLOCK_OUT);
-}
-
-static const struct snd_soc_ops edb93xx_ops = {
- .hw_params = edb93xx_hw_params,
-};
-
-SND_SOC_DAILINK_DEFS(hifi,
- DAILINK_COMP_ARRAY(COMP_CPU("ep93xx-i2s")),
- DAILINK_COMP_ARRAY(COMP_CODEC("spi0.0", "cs4271-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("ep93xx-i2s")));
-
-static struct snd_soc_dai_link edb93xx_dai = {
- .name = "CS4271",
- .stream_name = "CS4271 HiFi",
- .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBC_CFC,
- .ops = &edb93xx_ops,
- SND_SOC_DAILINK_REG(hifi),
-};
-
-static struct snd_soc_card snd_soc_edb93xx = {
- .name = "EDB93XX",
- .owner = THIS_MODULE,
- .dai_link = &edb93xx_dai,
- .num_links = 1,
-};
-
-static int edb93xx_probe(struct platform_device *pdev)
-{
- struct snd_soc_card *card = &snd_soc_edb93xx;
- int ret;
-
- ret = ep93xx_i2s_acquire();
- if (ret)
- return ret;
-
- card->dev = &pdev->dev;
-
- ret = snd_soc_register_card(card);
- if (ret) {
- dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
- ret);
- ep93xx_i2s_release();
- }
-
- return ret;
-}
-
-static void edb93xx_remove(struct platform_device *pdev)
-{
- struct snd_soc_card *card = platform_get_drvdata(pdev);
-
- snd_soc_unregister_card(card);
- ep93xx_i2s_release();
-}
-
-static struct platform_driver edb93xx_driver = {
- .driver = {
- .name = "edb93xx-audio",
- },
- .probe = edb93xx_probe,
- .remove_new = edb93xx_remove,
-};
-
-module_platform_driver(edb93xx_driver);
-
-MODULE_AUTHOR("Alexander Sverdlin <subaparts@yandex.ru>");
-MODULE_DESCRIPTION("ALSA SoC EDB93xx");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:edb93xx-audio");
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* [PATCH v6 40/40] dma: cirrus: remove platform code
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (38 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 39/40] ASoC: cirrus: edb93xx: Delete driver Nikita Shubin via B4 Relay
@ 2023-12-12 8:20 ` Nikita Shubin via B4 Relay
2023-12-13 18:30 ` Andy Shevchenko
2023-12-12 11:53 ` [PATCH v6 00/40] ep93xx device tree conversion Uwe Kleine-König
2023-12-13 17:59 ` Andy Shevchenko
41 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin via B4 Relay @ 2023-12-12 8:20 UTC (permalink / raw)
To: Vinod Koul, Nikita Shubin, Alexander Sverdlin
Cc: linux-kernel, dmaengine, Arnd Bergmann
From: Nikita Shubin <nikita.shubin@maquefel.me>
Remove DMA platform header, from now on we use device tree for dma
clients.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/dma/ep93xx_dma.c | 48 ++++++++++++++-
include/linux/platform_data/dma-ep93xx.h | 100 -------------------------------
2 files changed, 46 insertions(+), 102 deletions(-)
diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index b7dd8361f490..d11cd11f32bf 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
@@ -25,8 +26,6 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/platform_data/dma-ep93xx.h>
-
#include "dmaengine.h"
/* M2P registers */
@@ -106,6 +105,26 @@
#define DMA_MAX_CHAN_BYTES 0xffff
#define DMA_MAX_CHAN_DESCRIPTORS 32
+/*
+ * M2P channels.
+ *
+ * Note that these values are also directly used for setting the PPALLOC
+ * register.
+ */
+#define EP93XX_DMA_I2S1 0
+#define EP93XX_DMA_I2S2 1
+#define EP93XX_DMA_AAC1 2
+#define EP93XX_DMA_AAC2 3
+#define EP93XX_DMA_AAC3 4
+#define EP93XX_DMA_I2S3 5
+#define EP93XX_DMA_UART1 6
+#define EP93XX_DMA_UART2 7
+#define EP93XX_DMA_UART3 8
+#define EP93XX_DMA_IRDA 9
+/* M2M channels */
+#define EP93XX_DMA_SSP 10
+#define EP93XX_DMA_IDE 11
+
enum ep93xx_dma_type {
M2P_DMA,
M2M_DMA,
@@ -242,6 +261,31 @@ static struct ep93xx_dma_chan *to_ep93xx_dma_chan(struct dma_chan *chan)
return container_of(chan, struct ep93xx_dma_chan, chan);
}
+static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
+{
+ if (device_is_compatible(chan->device->dev, "cirrus,ep9301-dma-m2p"))
+ return true;
+
+ return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
+}
+
+/*
+ * ep93xx_dma_chan_direction - returns direction the channel can be used
+ *
+ * This function can be used in filter functions to find out whether the
+ * channel supports given DMA direction. Only M2P channels have such
+ * limitation, for M2M channels the direction is configurable.
+ */
+static inline enum dma_transfer_direction
+ep93xx_dma_chan_direction(struct dma_chan *chan)
+{
+ if (!ep93xx_dma_chan_is_m2p(chan))
+ return DMA_TRANS_NONE;
+
+ /* even channels are for TX, odd for RX */
+ return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
+}
+
/**
* ep93xx_dma_set_active - set new active descriptor chain
* @edmac: channel
diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h
deleted file mode 100644
index 67d65f1cb564..000000000000
--- a/include/linux/platform_data/dma-ep93xx.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/device.h>
-#include <linux/property.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-
-/*
- * M2P channels.
- *
- * Note that these values are also directly used for setting the PPALLOC
- * register.
- */
-#define EP93XX_DMA_I2S1 0
-#define EP93XX_DMA_I2S2 1
-#define EP93XX_DMA_AAC1 2
-#define EP93XX_DMA_AAC2 3
-#define EP93XX_DMA_AAC3 4
-#define EP93XX_DMA_I2S3 5
-#define EP93XX_DMA_UART1 6
-#define EP93XX_DMA_UART2 7
-#define EP93XX_DMA_UART3 8
-#define EP93XX_DMA_IRDA 9
-/* M2M channels */
-#define EP93XX_DMA_SSP 10
-#define EP93XX_DMA_IDE 11
-
-/**
- * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
- * @port: peripheral which is requesting the channel
- * @direction: TX/RX channel
- * @name: optional name for the channel, this is displayed in /proc/interrupts
- *
- * This information is passed as private channel parameter in a filter
- * function. Note that this is only needed for slave/cyclic channels. For
- * memcpy channels %NULL data should be passed.
- */
-struct ep93xx_dma_data {
- int port;
- enum dma_transfer_direction direction;
- const char *name;
-};
-
-/**
- * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
- * @name: name of the channel, used for getting the right clock for the channel
- * @base: mapped registers
- * @irq: interrupt number used by this channel
- */
-struct ep93xx_dma_chan_data {
- const char *name;
- void __iomem *base;
- int irq;
-};
-
-/**
- * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
- * @channels: array of channels which are passed to the driver
- * @num_channels: number of channels in the array
- *
- * This structure is passed to the DMA engine driver via platform data. For
- * M2P channels, contract is that even channels are for TX and odd for RX.
- * There is no requirement for the M2M channels.
- */
-struct ep93xx_dma_platform_data {
- struct ep93xx_dma_chan_data *channels;
- size_t num_channels;
-};
-
-static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
-{
- if (device_is_compatible(chan->device->dev, "cirrus,ep9301-dma-m2p"))
- return true;
-
- return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
-}
-
-/**
- * ep93xx_dma_chan_direction - returns direction the channel can be used
- * @chan: channel
- *
- * This function can be used in filter functions to find out whether the
- * channel supports given DMA direction. Only M2P channels have such
- * limitation, for M2M channels the direction is configurable.
- */
-static inline enum dma_transfer_direction
-ep93xx_dma_chan_direction(struct dma_chan *chan)
-{
- if (!ep93xx_dma_chan_is_m2p(chan))
- return DMA_TRANS_NONE;
-
- /* even channels are for TX, odd for RX */
- return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
-}
-
-#endif /* __ASM_ARCH_DMA_H */
--
2.41.0
^ permalink raw reply related [flat|nested] 77+ messages in thread
* Re: [PATCH v6 20/40] mtd: rawnand: add support for ts72xx
2023-12-12 8:20 ` [PATCH v6 20/40] mtd: rawnand: add support for ts72xx Nikita Shubin via B4 Relay
@ 2023-12-12 8:30 ` Greg Kroah-Hartman
2023-12-12 8:35 ` Nikita Shubin
2023-12-15 10:16 ` Miquel Raynal
1 sibling, 1 reply; 77+ messages in thread
From: Greg Kroah-Hartman @ 2023-12-12 8:30 UTC (permalink / raw)
To: nikita.shubin
Cc: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Arnd Bergmann, Linus Walleij, Christophe Kerello,
Krzysztof Kozlowski, Neil Armstrong, Chris Packham, Johan Jonker,
Jonathan Cameron, linux-kernel, linux-mtd
On Tue, Dec 12, 2023 at 11:20:37AM +0300, Nikita Shubin via B4 Relay wrote:
> From: Nikita Shubin <nikita.shubin@maquefel.me>
>
> Technologic Systems has it's own nand controller implementation in CPLD.
>
> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
> ---
> drivers/mtd/nand/raw/Kconfig | 7 +
> drivers/mtd/nand/raw/Makefile | 1 +
> drivers/mtd/nand/raw/technologic-nand-controller.c | 220 +++++++++++++++++++++
> 3 files changed, 228 insertions(+)
>
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index cbf8ae85e1ae..3937c10dea1c 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -449,6 +449,13 @@ config MTD_NAND_RENESAS
> Enables support for the NAND controller found on Renesas R-Car
> Gen3 and RZ/N1 SoC families.
>
> +config MTD_NAND_TS72XX
> + tristate "ts72xx NAND controller"
> + depends on ARCH_EP93XX && HAS_IOMEM
> + help
> + Enables support for NAND controller on ts72xx SBCs.
> + This is a legacy driver based on gen_nand.
Why is a new "legacy driver" being written these days? Why not do it
properly?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 20/40] mtd: rawnand: add support for ts72xx
2023-12-12 8:30 ` Greg Kroah-Hartman
@ 2023-12-12 8:35 ` Nikita Shubin
2023-12-12 14:05 ` Miquel Raynal
0 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin @ 2023-12-12 8:35 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Arnd Bergmann, Linus Walleij, Christophe Kerello,
Krzysztof Kozlowski, Neil Armstrong, Chris Packham, Johan Jonker,
Jonathan Cameron, linux-kernel, linux-mtd
Hello Greg!
On Tue, 2023-12-12 at 09:30 +0100, Greg Kroah-Hartman wrote:
> On Tue, Dec 12, 2023 at 11:20:37AM +0300, Nikita Shubin via B4 Relay
> wrote:
> > From: Nikita Shubin <nikita.shubin@maquefel.me>
> >
> > Technologic Systems has it's own nand controller implementation in
> > CPLD.
> >
> > Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
> > ---
> > drivers/mtd/nand/raw/Kconfig | 7 +
> > drivers/mtd/nand/raw/Makefile | 1 +
> > drivers/mtd/nand/raw/technologic-nand-controller.c | 220
> > +++++++++++++++++++++
> > 3 files changed, 228 insertions(+)
> >
> > diff --git a/drivers/mtd/nand/raw/Kconfig
> > b/drivers/mtd/nand/raw/Kconfig
> > index cbf8ae85e1ae..3937c10dea1c 100644
> > --- a/drivers/mtd/nand/raw/Kconfig
> > +++ b/drivers/mtd/nand/raw/Kconfig
> > @@ -449,6 +449,13 @@ config MTD_NAND_RENESAS
> > Enables support for the NAND controller found on Renesas
> > R-Car
> > Gen3 and RZ/N1 SoC families.
> >
> > +config MTD_NAND_TS72XX
> > + tristate "ts72xx NAND controller"
> > + depends on ARCH_EP93XX && HAS_IOMEM
> > + help
> > + Enables support for NAND controller on ts72xx SBCs.
> > + This is a legacy driver based on gen_nand.
>
> Why is a new "legacy driver" being written these days? Why not do it
> properly?
Sorry, my bad, description is a leftover from older description (when i
was allowed to submit a legacy one).
The driver is mostly new, shiny and approved by Miquel:
https://lore.kernel.org/lkml/20231004103911.2aa65354@xps-13/
The KConfig description should be fixed.
>
> thanks,
>
> greg k-h
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 00/40] ep93xx device tree conversion
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (39 preceding siblings ...)
2023-12-12 8:20 ` [PATCH v6 40/40] dma: cirrus: remove platform code Nikita Shubin via B4 Relay
@ 2023-12-12 11:53 ` Uwe Kleine-König
2023-12-13 17:59 ` Andy Shevchenko
41 siblings, 0 replies; 77+ messages in thread
From: Uwe Kleine-König @ 2023-12-12 11:53 UTC (permalink / raw)
To: nikita.shubin
Cc: Hartley Sweeten, Alexander Sverdlin, Russell King,
Lukasz Majewski, Linus Walleij, Bartosz Golaszewski,
Andy Shevchenko, Michael Turquette, Stephen Boyd,
Sebastian Reichel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vinod Koul, Wim Van Sebroeck, Guenter Roeck,
Thierry Reding, Mark Brown, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Miquel Raynal, Richard Weinberger,
Vignesh Raghavendra, Damien Le Moal, Sergey Shtylyov,
Dmitry Torokhov, Liam Girdwood, Jaroslav Kysela, Takashi Iwai,
linux-arm-kernel, linux-kernel, linux-gpio, linux-clk, linux-pm,
devicetree, dmaengine, linux-watchdog, linux-pwm, linux-spi,
netdev, linux-mtd, linux-ide, linux-input, linux-sound,
Arnd Bergmann, Bartosz Golaszewski, Krzysztof Kozlowski,
Andrew Lunn, Andy Shevchenko, Andy Shevchenko
[-- Attachment #1: Type: text/plain, Size: 1179 bytes --]
Hello,
On Tue, Dec 12, 2023 at 11:20:17AM +0300, Nikita Shubin via B4 Relay wrote:
> No major changes since last version all changes are cometic.
>
> Following patches require attention from Stephen Boyd, as they were converted to aux_dev as suggested:
>
> - ARM: ep93xx: add regmap aux_dev
> - clk: ep93xx: add DT support for Cirrus EP93xx
>
> DMA related patches still require Acked or Reviewed tags.
>
> got approval LGTM from Miquel:
> - mtd: rawnand: add support for ts72xx
> Link: https://lore.kernel.org/lkml/20231004103911.2aa65354@xps-13/
>
> new patches:
>
> ARM: ep93xx: Add terminator to gpiod_lookup_table
> - fixed terminator in gpiod_lockup_table
>
> So mostly all patches got approval.
>
> Patches should be now formated with '--histogram'
You didn't mention how this should be merged. IIRC for the earlier
rounds the idea was to merge it all together via arm-soc when all
necessary agreement is reached. I assume that's still the case here?
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 20/40] mtd: rawnand: add support for ts72xx
2023-12-12 8:35 ` Nikita Shubin
@ 2023-12-12 14:05 ` Miquel Raynal
0 siblings, 0 replies; 77+ messages in thread
From: Miquel Raynal @ 2023-12-12 14:05 UTC (permalink / raw)
To: Nikita Shubin
Cc: Greg Kroah-Hartman, Richard Weinberger, Vignesh Raghavendra,
Arnd Bergmann, Linus Walleij, Christophe Kerello,
Krzysztof Kozlowski, Neil Armstrong, Chris Packham, Johan Jonker,
Jonathan Cameron, linux-kernel, linux-mtd
Hello,
nikita.shubin@maquefel.me wrote on Tue, 12 Dec 2023 11:35:48 +0300:
> Hello Greg!
>
> On Tue, 2023-12-12 at 09:30 +0100, Greg Kroah-Hartman wrote:
> > On Tue, Dec 12, 2023 at 11:20:37AM +0300, Nikita Shubin via B4 Relay
> > wrote:
> > > From: Nikita Shubin <nikita.shubin@maquefel.me>
> > >
> > > Technologic Systems has it's own nand controller implementation in
> > > CPLD.
> > >
> > > Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
> > > ---
> > > drivers/mtd/nand/raw/Kconfig | 7 +
> > > drivers/mtd/nand/raw/Makefile | 1 +
> > > drivers/mtd/nand/raw/technologic-nand-controller.c | 220
> > > +++++++++++++++++++++
> > > 3 files changed, 228 insertions(+)
> > >
> > > diff --git a/drivers/mtd/nand/raw/Kconfig
> > > b/drivers/mtd/nand/raw/Kconfig
> > > index cbf8ae85e1ae..3937c10dea1c 100644
> > > --- a/drivers/mtd/nand/raw/Kconfig
> > > +++ b/drivers/mtd/nand/raw/Kconfig
> > > @@ -449,6 +449,13 @@ config MTD_NAND_RENESAS
> > > Enables support for the NAND controller found on Renesas
> > > R-Car
> > > Gen3 and RZ/N1 SoC families.
> > >
> > > +config MTD_NAND_TS72XX
> > > + tristate "ts72xx NAND controller"
> > > + depends on ARCH_EP93XX && HAS_IOMEM
> > > + help
> > > + Enables support for NAND controller on ts72xx SBCs.
> > > + This is a legacy driver based on gen_nand.
> >
> > Why is a new "legacy driver" being written these days? Why not do it
> > properly?
>
> Sorry, my bad, description is a leftover from older description (when i
> was allowed to submit a legacy one).
>
> The driver is mostly new, shiny and approved by Miquel:
>
> https://lore.kernel.org/lkml/20231004103911.2aa65354@xps-13/
>
> The KConfig description should be fixed.
Indeed, later submissions carried a brand new implementation which no
longer leverages any legacy hook. The Kconfig description is wrong,
good catch.
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 25/40] dt-bindings: wdt: Add ts72xx
2023-12-12 8:20 ` [PATCH v6 25/40] dt-bindings: wdt: Add ts72xx Nikita Shubin via B4 Relay
@ 2023-12-12 15:03 ` Guenter Roeck
0 siblings, 0 replies; 77+ messages in thread
From: Guenter Roeck @ 2023-12-12 15:03 UTC (permalink / raw)
To: nikita.shubin, Wim Van Sebroeck, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-watchdog, devicetree, linux-kernel, Arnd Bergmann,
Krzysztof Kozlowski
On 12/12/23 00:20, Nikita Shubin via B4 Relay wrote:
> From: Nikita Shubin <nikita.shubin@maquefel.me>
>
> Add DT binding for Technologic Systems TS-72xx watchdog.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 07/40] dt-bindings: soc: Add Cirrus EP93xx
2023-12-12 8:20 ` [PATCH v6 07/40] dt-bindings: soc: Add Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-13 6:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 77+ messages in thread
From: Krzysztof Kozlowski @ 2023-12-13 6:53 UTC (permalink / raw)
To: nikita.shubin, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Michael Turquette, Stephen Boyd, Alexander Sverdlin
Cc: devicetree, linux-kernel, linux-clk, Arnd Bergmann
On 12/12/2023 09:20, Nikita Shubin via B4 Relay wrote:
> From: Nikita Shubin <nikita.shubin@maquefel.me>
>
> Add device tree bindings for the Cirrus Logic EP93xx SoC.
>
> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 01/40] ARM: ep93xx: Add terminator to gpiod_lookup_table
2023-12-12 8:20 ` [PATCH v6 01/40] ARM: ep93xx: Add terminator to gpiod_lookup_table Nikita Shubin via B4 Relay
@ 2023-12-13 17:24 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 17:24 UTC (permalink / raw)
To: Nikita Shubin
Cc: Hartley Sweeten, Alexander Sverdlin, Russell King,
linux-arm-kernel, linux-kernel, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:18AM +0300, Nikita Shubin wrote:
> Without the terminator, if a con_id is passed to gpio_find() that
> does not exist in the lookup table the function will not stop looping
> correctly, and eventually cause an oops.
Reported-by?
Fixes?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 03/40] ARM: ep93xx: add regmap aux_dev
2023-12-12 8:20 ` [PATCH v6 03/40] ARM: ep93xx: add regmap aux_dev Nikita Shubin via B4 Relay
@ 2023-12-13 17:28 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 17:28 UTC (permalink / raw)
To: Nikita Shubin
Cc: Linus Walleij, Dmitry Torokhov, Damien Le Moal,
Uwe Kleine-König, linux-kernel, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:20AM +0300, Nikita Shubin wrote:
> The following driver's should be instantiated by ep93xx syscon driver:
>
> - reboot
> - pinctrl
> - clock
>
> They all require access to DEVCFG register with a shared lock held, to
> avoid conflict writing to swlocked parts of DEVCFG.
>
> Provide common resources such as base, regmap and spinlock via auxiliary
> bus framework.
...
> struct platform_device;
> +struct regmap;
Perhaps more to add. See below.
...
> +enum ep93xx_soc_model {
> + EP93XX_9301_SOC,
> + EP93XX_9307_SOC,
> + EP93XX_9312_SOC
It doesn't look like a termination, so leave trailing comma.
> +};
...
> +#include <linux/spinlock.h>
I don't see a user for this. Am I missing something?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 04/40] clk: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 ` [PATCH v6 04/40] clk: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-13 17:42 ` Andy Shevchenko
2023-12-23 8:35 ` Nikita Shubin
0 siblings, 1 reply; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 17:42 UTC (permalink / raw)
To: Nikita Shubin
Cc: Michael Turquette, Stephen Boyd, linux-kernel, linux-clk, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:21AM +0300, Nikita Shubin wrote:
> Rewrite EP93xx clock driver located in arch/arm/mach-ep93xx/clock.c
> trying to do everything the device tree way:
>
> - provide clock acces via of
> - drop clk_hw_register_clkdev
> - drop init code and use module_auxiliary_driver
...
> +#define EP93XX_I2SCLKDIV_SDIV (1 << 16)
BIT() ?
...
> +static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
> +{
> + struct ep93xx_clk *clk = ep93xx_clk_from(hw);
> + struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
> + u32 val;
> +
> + regmap_read(priv->map, clk->reg, &val);
> +
> + val &= EP93XX_SYSCON_CLKDIV_MASK;
> +
> + switch (val) {
> + case EP93XX_SYSCON_CLKDIV_ESEL:
> + return 1; /* PLL1 */
> + case EP93XX_SYSCON_CLKDIV_MASK:
> + return 2; /* PLL2 */
> + default:
> + break;
> + };
> +
> + return 0; /* XTALI */
You may return directly from default.
> +}
...
> +static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
> +{
> + struct ep93xx_clk *clk = ep93xx_clk_from(hw);
> + struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
> + unsigned long flags;
> + u32 val;
> +
> + if (index >= 3)
> + return -EINVAL;
> + spin_lock_irqsave(&priv->lock, flags);
Why not guard() ?
> + regmap_read(priv->map, clk->reg, &val);
> + val &= ~(EP93XX_SYSCON_CLKDIV_MASK);
> + val |= index > 0 ? EP93XX_SYSCON_CLKDIV_ESEL : 0;
> + val |= index > 1 ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
> +
> + ep93xx_clk_write(priv, clk->reg, val);
> +
> + spin_unlock_irqrestore(&priv->lock, flags);
> +
> + return 0;
> +}
...
> +static bool is_best(unsigned long rate, unsigned long now,
> + unsigned long best)
> +{
> + return abs_diff(rate, now) < abs_diff(rate, best);
Have you included necessary header for this?
> +}
...
> +static int ep93xx_mux_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + unsigned long best_rate = 0, actual_rate, mclk_rate;
> + unsigned long rate = req->rate;
> + struct clk_hw *parent_best = NULL;
Strictly speaking you don't need an assignment here as you can compare the loop
variable value against the maximum. But I don't know how heave the respective
CLk call is and if it has no side-effects due to operations inside the loop body.
> + unsigned long parent_rate_best;
> + unsigned long parent_rate;
> + int div, pdiv;
> + unsigned int i;
> +
> + /*
> + * Try the two pll's and the external clock
Either comma + 'b' or missing period.
> + * Because the valid predividers are 2, 2.5 and 3, we multiply
> + * all the clocks by 2 to avoid floating point math.
> + *
> + * This is based on the algorithm in the ep93xx raster guide:
> + * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
> + *
> + */
> + for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
> + struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
> +
> + parent_rate = clk_hw_get_rate(parent);
> + mclk_rate = parent_rate * 2;
> +
> + /* Try each predivider value */
> + for (pdiv = 4; pdiv <= 6; pdiv++) {
> + div = DIV_ROUND_CLOSEST(mclk_rate, rate * pdiv);
> + if (!in_range(div, 1, 127))
Same header as for abs_diff()?
> + continue;
> +
> + actual_rate = DIV_ROUND_CLOSEST(mclk_rate, pdiv * div);
> + if (is_best(rate, actual_rate, best_rate)) {
> + best_rate = actual_rate;
> + parent_rate_best = parent_rate;
> + parent_best = parent;
> + }
> + }
(1)
> + }
> +
> + if (!parent_best)
> + return -EINVAL;
> +
> + req->best_parent_rate = parent_rate_best;
> + req->best_parent_hw = parent_best;
> + req->rate = best_rate;
> +
> + return 0;
> +}
...
> + mclk_rate = parent_rate * 2;
> +
> + for (pdiv = 4; pdiv <= 6; pdiv++) {
> + div = DIV_ROUND_CLOSEST(mclk_rate, rate * pdiv);
> + if (!in_range(div, 1, 127))
> + continue;
> +
> + actual_rate = DIV_ROUND_CLOSEST(mclk_rate, pdiv * div);
> + if (abs(actual_rate - rate) < rate_err) {
> + npdiv = pdiv - 3;
> + ndiv = div;
> + rate_err = abs(actual_rate - rate);
> + }
> + }
Looks very similar to (1). Can be deduplicated?
...
> + /*
> + * Clear old dividers
> + * Bit 7 is reserved bit in all ClkDiv registers
Missing periods.
> + */
...
> +static unsigned long calc_pll_rate(u64 rate, u32 config_word)
> +{
> + rate *= ((config_word >> 11) & GENMASK(4, 0)) + 1; /* X1FBD */
> + rate *= ((config_word >> 5) & GENMASK(5, 0)) + 1; /* X2FBD */
> + do_div(rate, (config_word & GENMASK(4, 0)) + 1); /* X2IPD */
> + rate >>= ((config_word >> 16) & GENMASK(1, 0)); /* PS */
Outer parentheses are redundant.
> + return rate;
> +}
...
> + /*
> + * EP93xx SSP clock rate was doubled in version E2. For more information
> + * see:
> + * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
Can you point to the specific section? Like
* see section 1.2.3 "Foo bar":
> + */
...
> + /* touchscreen/adc clock */
ADC
...
> + /*
> + * On reset PDIV and VDIV is set to zero, while PDIV zero
> + * means clock disable, VDIV shouldn't be zero.
> + * So we set both video and is2 dividers to minimum.
i2s?
> + * ENA - Enable CLK divider.
> + * PDIV - 00 - Disable clock
> + * VDIV - at least 2
> + */
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 05/40] pinctrl: add a Cirrus ep93xx SoC pin controller
2023-12-12 8:20 ` [PATCH v6 05/40] pinctrl: add a Cirrus ep93xx SoC pin controller Nikita Shubin via B4 Relay
@ 2023-12-13 17:51 ` Andy Shevchenko
2023-12-23 8:55 ` Nikita Shubin
0 siblings, 1 reply; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 17:51 UTC (permalink / raw)
To: Nikita Shubin; +Cc: Linus Walleij, linux-kernel, linux-gpio, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:22AM +0300, Nikita Shubin wrote:
> Add a pin control (only multiplexing) driver for ep93xx SoC so
> we can fully convert ep93xx to device tree.
>
> This driver is capable of muxing ep9301/ep9302/ep9307/ep9312/ep9315
> variants, this is chosen based on "compatible" in device tree.
Mostly nit-picks below, with the exception to setting device node.
See below.
...
> +/*
> + * There are several system configuration options selectable by the DeviceCfg and SysCfg
> + * registers. These registers provide the selection of several pin multiplexing options and also
> + * provide software access to the system reset configuration options. Please refer to the
> + * descriptions of the registers, “DeviceCfg” on page 5-25 and “SysCfg” on page 5-34, for a
> + * detailed explanation.
> + */
> +#define EP93XX_SYSCON_DEVCFG_D1ONG BIT(30) /* not used */
> +#define EP93XX_SYSCON_DEVCFG_D0ONG BIT(29) /* not used */
> +#define EP93XX_SYSCON_DEVCFG_IONU2 BIT(28) /* not used */
> +#define EP93XX_SYSCON_DEVCFG_GONK BIT(27) /* done */
> +#define EP93XX_SYSCON_DEVCFG_TONG BIT(26) /* not used */
> +#define EP93XX_SYSCON_DEVCFG_MONG BIT(25) /* not used */
> +#define EP93XX_SYSCON_DEVCFG_A2ONG BIT(22) /* not used */
> +#define EP93XX_SYSCON_DEVCFG_A1ONG BIT(21) /* not used */
> +#define EP93XX_SYSCON_DEVCFG_HONIDE BIT(11) /* done */
> +#define EP93XX_SYSCON_DEVCFG_GONIDE BIT(10) /* done */
> +#define EP93XX_SYSCON_DEVCFG_PONG BIT(9) /* done */
> +#define EP93XX_SYSCON_DEVCFG_EONIDE BIT(8) /* done */
> +#define EP93XX_SYSCON_DEVCFG_I2SONSSP BIT(7) /* done */
> +#define EP93XX_SYSCON_DEVCFG_I2SONAC97 BIT(6) /* done */
> +#define EP93XX_SYSCON_DEVCFG_RASONP3 BIT(4) /* done */
What are these comments supposed to mean?
...
> +static const struct pinctrl_ops ep93xx_pctrl_ops = {
> + .get_groups_count = ep93xx_get_groups_count,
> + .get_group_name = ep93xx_get_group_name,
> + .get_group_pins = ep93xx_get_group_pins,
> + .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
> + .dt_free_map = pinconf_generic_dt_free_map,
Hmm... Don you need to ifdef these fields?
> +};
...
> +static const struct pinfunction ep93xx_pmx_functions[] = {
> + PINCTRL_PINFUNCTION("spi", spigrps, ARRAY_SIZE(spigrps)),
Is array_size.h being included?
> + PINCTRL_PINFUNCTION("ac97", ac97grps, ARRAY_SIZE(ac97grps)),
> + PINCTRL_PINFUNCTION("i2s", i2sgrps, ARRAY_SIZE(i2sgrps)),
> + PINCTRL_PINFUNCTION("pwm", pwm1grps, ARRAY_SIZE(pwm1grps)),
> + PINCTRL_PINFUNCTION("keypad", keypadgrps, ARRAY_SIZE(keypadgrps)),
> + PINCTRL_PINFUNCTION("pata", idegrps, ARRAY_SIZE(idegrps)),
> + PINCTRL_PINFUNCTION("lcd", rastergrps, ARRAY_SIZE(rastergrps)),
> + PINCTRL_PINFUNCTION("gpio", gpiogrps, ARRAY_SIZE(gpiogrps)),
> +};
...
> + switch (pmx->model) {
> + case EP93XX_9301_PINCTRL:
> + grp = &ep9301_pin_groups[group];
> + break;
> + case EP93XX_9307_PINCTRL:
> + grp = &ep9307_pin_groups[group];
> + break;
> + case EP93XX_9312_PINCTRL:
> + grp = &ep9312_pin_groups[group];
> + break;
default?
> + }
...
> + pmx->model = (int)(uintptr_t)id->driver_data;
Is the model defined as int (signed)?
Otherwise can we use proper type?
...
> + /* using parent of_node to match in get_pinctrl_dev_from_of_node() */
> + device_set_of_node_from_dev(dev, adev->dev.parent);
Hmm... This takes references in comparison to device_set_node(). Is it intended?
...
> + pmx->pctl = devm_pinctrl_register(dev, &ep93xx_pmx_desc, pmx);
> + if (IS_ERR(pmx->pctl))
> + return dev_err_probe(dev, PTR_ERR(pmx->pctl), "could not register pinmux driver\n");
It can be written as
pmx->pctl = devm_pinctrl_register(dev, &ep93xx_pmx_desc, pmx);
ret = PTR_ERR_OR_ZERO(...);
if (ret)
return dev_err_probe(dev, ret, "could not register pinmux driver\n");
(makes line shorter). But it's up to you.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 06/40] power: reset: Add a driver for the ep93xx reset
2023-12-12 8:20 ` [PATCH v6 06/40] power: reset: Add a driver for the ep93xx reset Nikita Shubin via B4 Relay
@ 2023-12-13 17:54 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 17:54 UTC (permalink / raw)
To: Nikita Shubin; +Cc: Sebastian Reichel, linux-kernel, linux-pm, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:23AM +0300, Nikita Shubin wrote:
> Implement the reset behaviour of the various EP93xx SoCS
> in drivers/power/reset.
>
> It used to be located in arch/arm/mach-ep93xx.
...
> +#include <linux/bits.h>
+ container_of.h
> +#include <linux/delay.h>
+ errno.h
> +#include <linux/mfd/syscon.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
Should this be the auxiliary one?
> +#include <linux/reboot.h>
+ device.h or slab.h where devm_kzalloc() is defined.
Depends on above dev_printk.h (it's guaranteed by device.h).
> +static const struct auxiliary_device_id ep93xx_reboot_ids[] = {
> + {
> + .name = "soc_ep93xx.reset-ep93xx",
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(auxiliary, ep93xx_reboot_ids);
module.h
mod_devicetable.h
...
> +static struct auxiliary_driver ep93xx_reboot_driver = {
> + .probe = ep93xx_reboot_probe,
> + .id_table = ep93xx_reboot_ids,
> +};
> +module_auxiliary_driver(ep93xx_reboot_driver);
Not seeing the platform_device.h use...
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 14/40] pwm: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 ` [PATCH v6 14/40] pwm: ep93xx: add DT support for " Nikita Shubin via B4 Relay
@ 2023-12-13 17:56 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 17:56 UTC (permalink / raw)
To: Nikita Shubin
Cc: Thierry Reding, Uwe Kleine-König, linux-pwm, linux-kernel,
Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:31AM +0300, Nikita Shubin wrote:
> Add OF ID match table.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 12/40] watchdog: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 ` [PATCH v6 12/40] watchdog: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-13 17:56 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 17:56 UTC (permalink / raw)
To: Nikita Shubin
Cc: Wim Van Sebroeck, Guenter Roeck, linux-watchdog, linux-kernel,
Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:29AM +0300, Nikita Shubin wrote:
> Add OF ID match table.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 00/40] ep93xx device tree conversion
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
` (40 preceding siblings ...)
2023-12-12 11:53 ` [PATCH v6 00/40] ep93xx device tree conversion Uwe Kleine-König
@ 2023-12-13 17:59 ` Andy Shevchenko
2023-12-23 9:12 ` Nikita Shubin
41 siblings, 1 reply; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 17:59 UTC (permalink / raw)
To: Nikita Shubin
Cc: Hartley Sweeten, Alexander Sverdlin, Russell King,
Lukasz Majewski, Linus Walleij, Bartosz Golaszewski,
Michael Turquette, Stephen Boyd, Sebastian Reichel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Wim Van Sebroeck,
Guenter Roeck, Thierry Reding, Uwe Kleine-König, Mark Brown,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Damien Le Moal, Sergey Shtylyov, Dmitry Torokhov, Liam Girdwood,
Jaroslav Kysela, Takashi Iwai, linux-arm-kernel, linux-kernel,
linux-gpio, linux-clk, linux-pm, devicetree, dmaengine,
linux-watchdog, linux-pwm, linux-spi, netdev, linux-mtd,
linux-ide, linux-input, linux-sound, Arnd Bergmann,
Bartosz Golaszewski, Krzysztof Kozlowski, Andrew Lunn
On Tue, Dec 12, 2023 at 11:20:17AM +0300, Nikita Shubin wrote:
> No major changes since last version all changes are cometic.
>
> Following patches require attention from Stephen Boyd, as they were converted to aux_dev as suggested:
>
> - ARM: ep93xx: add regmap aux_dev
> - clk: ep93xx: add DT support for Cirrus EP93xx
>
> DMA related patches still require Acked or Reviewed tags.
>
> got approval LGTM from Miquel:
> - mtd: rawnand: add support for ts72xx
> Link: https://lore.kernel.org/lkml/20231004103911.2aa65354@xps-13/
>
> new patches:
>
> ARM: ep93xx: Add terminator to gpiod_lookup_table
> - fixed terminator in gpiod_lockup_table
>
> So mostly all patches got approval.
>
> Patches should be now formated with '--histogram'
It _feels_ like some tags might be missing.
In any case I suggest to use `b4` tool to retrieve tags when preparing
the next version:
git checkout -b vXX v6.7-rcX
b4 am -slt $MSG_ID_OF_v(XX-1)
git am ...
git rebase --interactive ... # to address comments
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 26/40] wdt: ts72xx: add DT support for ts72xx
2023-12-12 8:20 ` [PATCH v6 26/40] wdt: ts72xx: add DT support for ts72xx Nikita Shubin via B4 Relay
@ 2023-12-13 18:10 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:10 UTC (permalink / raw)
To: Nikita Shubin
Cc: Wim Van Sebroeck, Guenter Roeck, linux-watchdog, linux-kernel,
Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:43AM +0300, Nikita Shubin wrote:
> Add OF ID match table.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 16/40] spi: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 ` [PATCH v6 16/40] spi: ep93xx: add DT support for " Nikita Shubin via B4 Relay
@ 2023-12-13 18:13 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:13 UTC (permalink / raw)
To: Nikita Shubin; +Cc: Mark Brown, linux-spi, linux-kernel, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:33AM +0300, Nikita Shubin wrote:
> - add OF ID match table
> - add device tree DMA request, so we can probe defer, in case DMA is not
> ready yet
> - drop DMA platform code
...
> + espi->dma_rx = dma_request_chan(dev, "rx");
> + if (IS_ERR(espi->dma_rx)) {
> + ret = PTR_ERR(espi->dma_rx);
> + dev_err_probe(dev, ret, "rx DMA setup failed");
ret = dev_err_probe(...);
> goto fail_free_page;
> }
...
> + espi->dma_tx = dma_request_chan(dev, "tx");
> + if (IS_ERR(espi->dma_tx)) {
> + ret = PTR_ERR(espi->dma_tx);
> + dev_err_probe(dev, ret, "tx DMA setup failed");
Ditto.
> goto fail_release_rx;
> }
...
Otherwise LGTM.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
2023-12-12 8:20 ` [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use Nikita Shubin via B4 Relay
@ 2023-12-13 18:16 ` Andy Shevchenko
2023-12-13 18:33 ` Uwe Kleine-König
0 siblings, 1 reply; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:16 UTC (permalink / raw)
To: Nikita Shubin
Cc: Hartley Sweeten, Alexander Sverdlin, Russell King,
Sergey Shtylyov, Damien Le Moal, Linus Walleij, Dmitry Torokhov,
Uwe Kleine-König, linux-arm-kernel, linux-kernel, linux-ide,
Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:53AM +0300, Nikita Shubin wrote:
> Drop legacy acquire/release since we are using pinctrl for this now.
...
> - if (IS_ERR(drv_data->dma_rx_channel)) {
> + if (PTR_ERR_OR_ZERO(drv_data->dma_rx_channel)) {
This seems incorrect.
> ret = PTR_ERR(drv_data->dma_rx_channel);
> return dev_err_probe(dev, ret, "rx DMA setup failed");
return dev_err_probe(...);
> }
I think you wanted
ret = PTR_ERR_OR_ZERO(drv_data->dma_rx_channel);
if (ret)
return dev_err_probe(dev, ret, "rx DMA setup failed");
...
> drv_data->dma_tx_channel = dma_request_chan(&pdev->dev, "tx");
> - if (IS_ERR(drv_data->dma_tx_channel)) {
> + if (PTR_ERR_OR_ZERO(drv_data->dma_tx_channel)) {
> ret = PTR_ERR(drv_data->dma_tx_channel);
> dev_err_probe(dev, ret, "tx DMA setup failed");
> goto fail_release_rx;
Ditto.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 22/40] ata: pata_ep93xx: add device tree support
2023-12-12 8:20 ` [PATCH v6 22/40] ata: pata_ep93xx: add device tree support Nikita Shubin via B4 Relay
@ 2023-12-13 18:19 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:19 UTC (permalink / raw)
To: Nikita Shubin
Cc: Sergey Shtylyov, Damien Le Moal, linux-ide, linux-kernel, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:39AM +0300, Nikita Shubin wrote:
> - add OF ID match table
> - drop platform DMA and filters
> - change DMA setup to OF, so we can defer probe
...
> + drv_data->dma_rx_channel = dma_request_chan(dev, "rx");
> + if (IS_ERR(drv_data->dma_rx_channel)) {
> + ret = PTR_ERR(drv_data->dma_rx_channel);
> + return dev_err_probe(dev, ret, "rx DMA setup failed");
> + }
See the comments to other patches about PTR_ERR_OR_ZERO() use and
returning dev_err_probe().
...
> + drv_data->dma_tx_channel = dma_request_chan(&pdev->dev, "tx");
> + if (IS_ERR(drv_data->dma_tx_channel)) {
> + ret = PTR_ERR(drv_data->dma_tx_channel);
> + dev_err_probe(dev, ret, "tx DMA setup failed");
> + goto fail_release_rx;
> }
Ditto.
...
Seems like broken rebase or so as some of the latter changes in this file
should be done here.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 10/40] dma: cirrus: Convert to DT for Cirrus EP93xx
2023-12-12 8:20 ` [PATCH v6 10/40] dma: cirrus: Convert to DT for " Nikita Shubin via B4 Relay
@ 2023-12-13 18:28 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:28 UTC (permalink / raw)
To: Nikita Shubin
Cc: Vinod Koul, Alexander Sverdlin, dmaengine, linux-kernel, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:27AM +0300, Nikita Shubin wrote:
> Convert Cirrus EP93xx DMA to device tree usage:
>
> - add OF ID match table with data
> - add of_probe for device tree
> - add xlate for m2m/m2p
> - drop subsys_initcall code
> - drop platform probe
> - drop platform structs usage
>
> >From now only it supports only device tree probing.
"From now on it only..." (and single "only" is enough).
...
> + edmac->clk = devm_clk_get(dev, dma_clk_name);
> if (IS_ERR(edmac->clk)) {
> + dev_warn(dev, "failed to get clock\n");
> continue;
> }
This is incorrect, it doesn't handle deferred probe in two aspects:
- spamming the logs;
- not really trying to reprobe.
...
> +static bool ep93xx_m2p_dma_filter(struct dma_chan *chan, void *filter_param)
> +{
> + struct ep93xx_dma_chan *echan = to_ep93xx_dma_chan(chan);
> + struct ep93xx_dma_chan_cfg *cfg = filter_param;
> +
> + if (cfg->dir == ep93xx_dma_chan_direction(chan)) {
> + echan->dma_cfg = *cfg;
> + return true;
> + }
> +
> + return false;
Perhaps
if (cfg->dir != ep93xx_dma_chan_direction(chan))
return false;
echan->dma_cfg = *cfg;
return true;
> +}
...
> + if (!is_slave_direction(direction))
> + return NULL;
> +
> +
One blank line is enough.
...
> + switch (port) {
> + case EP93XX_DMA_SSP:
> + case EP93XX_DMA_IDE:
> + break;
> + default:
> + return NULL;
> + }
> + if (!is_slave_direction(direction))
> + return NULL;
This can be performed before switch, no?
...
> +#include <linux/device.h>
> +#include <linux/property.h>
> +#include <linux/string.h>
> #include <linux/types.h>
> #include <linux/dmaengine.h>
> #include <linux/dma-mapping.h>
Perhaps make it a bit more ordered by squeezing to the (most) ordered parts?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 40/40] dma: cirrus: remove platform code
2023-12-12 8:20 ` [PATCH v6 40/40] dma: cirrus: remove platform code Nikita Shubin via B4 Relay
@ 2023-12-13 18:30 ` Andy Shevchenko
2023-12-23 9:49 ` Nikita Shubin
0 siblings, 1 reply; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:30 UTC (permalink / raw)
To: Nikita Shubin
Cc: Vinod Koul, Alexander Sverdlin, linux-kernel, dmaengine, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:57AM +0300, Nikita Shubin wrote:
> Remove DMA platform header, from now on we use device tree for dma
DMA
> clients.
...
> +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
> +{
> + if (device_is_compatible(chan->device->dev, "cirrus,ep9301-dma-m2p"))
> + return true;
> +
> + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
> +}
Hmm... Isn't the same as new helper in a header in another patch?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
2023-12-13 18:16 ` Andy Shevchenko
@ 2023-12-13 18:33 ` Uwe Kleine-König
2023-12-13 18:48 ` Andy Shevchenko
0 siblings, 1 reply; 77+ messages in thread
From: Uwe Kleine-König @ 2023-12-13 18:33 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Nikita Shubin, Hartley Sweeten, Alexander Sverdlin, Russell King,
Sergey Shtylyov, Damien Le Moal, Linus Walleij, Dmitry Torokhov,
linux-arm-kernel, linux-kernel, linux-ide, Arnd Bergmann
[-- Attachment #1: Type: text/plain, Size: 1196 bytes --]
On Wed, Dec 13, 2023 at 08:16:26PM +0200, Andy Shevchenko wrote:
> On Tue, Dec 12, 2023 at 11:20:53AM +0300, Nikita Shubin wrote:
> > Drop legacy acquire/release since we are using pinctrl for this now.
>
> ...
>
> > - if (IS_ERR(drv_data->dma_rx_channel)) {
> > + if (PTR_ERR_OR_ZERO(drv_data->dma_rx_channel)) {
>
> This seems incorrect.
>
> > ret = PTR_ERR(drv_data->dma_rx_channel);
> > return dev_err_probe(dev, ret, "rx DMA setup failed");
>
> return dev_err_probe(...);
>
> > }
>
> I think you wanted
>
> ret = PTR_ERR_OR_ZERO(drv_data->dma_rx_channel);
> if (ret)
> return dev_err_probe(dev, ret, "rx DMA setup failed");
How is that different from
if (IS_ERR(drv_data->dma_rx_channel))
return dev_err_probe(dev, PTR_ERR(drv_data->dma_rx_channel), "....");
(which seems to be more idiomatic to me)? While I was involved in
creating PTR_ERR_OR_ZERO, I don't particularily like it (today).
Also note that you want a \n at the end of error messages.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 08/40] soc: Add SoC driver for Cirrus ep93xx
2023-12-12 8:20 ` [PATCH v6 08/40] soc: Add SoC driver for Cirrus ep93xx Nikita Shubin via B4 Relay
@ 2023-12-13 18:37 ` Andy Shevchenko
2023-12-23 10:06 ` Nikita Shubin
0 siblings, 1 reply; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:37 UTC (permalink / raw)
To: Nikita Shubin
Cc: Conor Dooley, Ulf Hansson, Joel Stanley, Walker Chen,
Jonathan Neuschäfer, Huisong Li, Arnd Bergmann, Wei Xu,
Emil Renner Berthing, Linus Walleij, Alexander Sverdlin,
Hal Feng, linux-kernel
On Tue, Dec 12, 2023 at 11:20:25AM +0300, Nikita Shubin wrote:
> Add an SoC driver for the ep93xx. Currently there is only one thing
> not fitting into any other framework, and that is the swlock setting.
...
> +/*
> + * SoC driver for Cirrus EP93xx chips.
> + * Copyright (C) 2022 Nikita Shubin <nikita.shubin@maquefel.me>
> + *
> + * Based on a rewrite of arch/arm/mach-ep93xx/core.c
> + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
> + * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
> + *
> + * Thanks go to Michael Burian and Ray Lehtiniemi for their key
> + * role in the ep93xx Linux community
Missing period.
> + */
...
> +#include <linux/bits.h>
> +#include <linux/init.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/of_fdt.h>
> +#include <linux/platform_device.h>
Isn't this an incorrect header and should be auxiliary one?
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
+ spinlock.h ?
But since it's a new code, why not cleanup.h?
> +#include <linux/sys_soc.h>
...
> + enum ep93xx_soc_model model = (int)(uintptr_t)of_device_get_match_data(&pdev->dev);
int?
Maybe
strict device *dev = &pdev->dev;
enum ep93xx_soc_model model;
...
model = (enum ep93xx_soc_model)(uintptr_t)device_get_match_data(dev);
?
...
> + struct device *dev = &pdev->dev;
Ah you even have this already!
...
> + dev_info(dev, "EP93xx SoC revision %s\n", attrs->revision);
Hmm... Is this message anyhow useful?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 18/40] net: cirrus: add DT support for Cirrus EP93xx
2023-12-12 8:20 ` [PATCH v6 18/40] net: cirrus: add DT support for " Nikita Shubin via B4 Relay
@ 2023-12-13 18:39 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:39 UTC (permalink / raw)
To: Nikita Shubin
Cc: Hartley Sweeten, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, netdev, linux-kernel, Arnd Bergmann, Andrew Lunn
On Tue, Dec 12, 2023 at 11:20:35AM +0300, Nikita Shubin wrote:
> - add OF ID match table
> - get phy_id from the device tree, as part of mdio
> - copy_addr is now always used, as there is no SoC/board that aren't
> - dropped platform header
...
> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> irq = platform_get_irq(pdev, 0);
> if (!mem || irq < 0)
> return -ENXIO;
Strictly speaking these should be separated and different codes being retuned as
platform_get_irq() might return something different in some cases.
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
> + base_addr = ioremap(mem->start, resource_size(mem));
> + if (!base_addr)
> + return dev_err_probe(&pdev->dev, -EIO, "Failed to ioremap ethernet registers\n");
Hmm... Why not devm_platform_ioremap_resource()?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 24/40] input: keypad: ep93xx: add DT support for Cirrus EP93xx
2023-12-12 8:20 ` [PATCH v6 24/40] input: keypad: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
@ 2023-12-13 18:41 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:41 UTC (permalink / raw)
To: Nikita Shubin
Cc: Hartley Sweeten, Alexander Sverdlin, Russell King,
Dmitry Torokhov, Uwe Kleine-König, Linus Walleij,
Damien Le Moal, Sergey Shtylyov, linux-arm-kernel, linux-kernel,
linux-input, Arnd Bergmann
On Tue, Dec 12, 2023 at 11:20:41AM +0300, Nikita Shubin wrote:
> - drop flags, they were not used anyway
> - add OF ID match table
> - process "autorepeat", "debounce-delay-ms", prescale from device tree
> - drop platform data usage and it's header
> - keymap goes from device tree now on
...
> static void ep93xx_keypad_config(struct ep93xx_keypad *keypad)
> {
> unsigned int val = 0;
>
> + val |= ((keypad->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK);
Since you are touching these lines (see below) you can drop unneeded outer
parentheses.
>
> + val |= ((keypad->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
See above.
> __raw_writel(val, keypad->mmio_base + KEY_INIT);
> }
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
2023-12-13 18:33 ` Uwe Kleine-König
@ 2023-12-13 18:48 ` Andy Shevchenko
2023-12-14 10:26 ` Uwe Kleine-König
0 siblings, 1 reply; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-13 18:48 UTC (permalink / raw)
To: Uwe Kleine-König
Cc: Nikita Shubin, Hartley Sweeten, Alexander Sverdlin, Russell King,
Sergey Shtylyov, Damien Le Moal, Linus Walleij, Dmitry Torokhov,
linux-arm-kernel, linux-kernel, linux-ide, Arnd Bergmann
On Wed, Dec 13, 2023 at 07:33:49PM +0100, Uwe Kleine-König wrote:
> On Wed, Dec 13, 2023 at 08:16:26PM +0200, Andy Shevchenko wrote:
> > On Tue, Dec 12, 2023 at 11:20:53AM +0300, Nikita Shubin wrote:
> > > Drop legacy acquire/release since we are using pinctrl for this now.
...
> > > - if (IS_ERR(drv_data->dma_rx_channel)) {
> > > + if (PTR_ERR_OR_ZERO(drv_data->dma_rx_channel)) {
> >
> > This seems incorrect.
> >
> > > ret = PTR_ERR(drv_data->dma_rx_channel);
> > > return dev_err_probe(dev, ret, "rx DMA setup failed");
> >
> > return dev_err_probe(...);
> >
> > > }
> >
> > I think you wanted
> >
> > ret = PTR_ERR_OR_ZERO(drv_data->dma_rx_channel);
> > if (ret)
> > return dev_err_probe(dev, ret, "rx DMA setup failed");
>
> How is that different from
>
> if (IS_ERR(drv_data->dma_rx_channel))
> return dev_err_probe(dev, PTR_ERR(drv_data->dma_rx_channel), "....");
>
> (which seems to be more idiomatic to me)? While I was involved in
> creating PTR_ERR_OR_ZERO, I don't particularily like it (today).
Makes lines shorter, either works for me.
> Also note that you want a \n at the end of error messages.
Indeed.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
2023-12-13 18:48 ` Andy Shevchenko
@ 2023-12-14 10:26 ` Uwe Kleine-König
0 siblings, 0 replies; 77+ messages in thread
From: Uwe Kleine-König @ 2023-12-14 10:26 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Nikita Shubin, Hartley Sweeten, Alexander Sverdlin, Russell King,
Sergey Shtylyov, Damien Le Moal, Linus Walleij, Dmitry Torokhov,
linux-arm-kernel, linux-kernel, linux-ide, Arnd Bergmann
[-- Attachment #1: Type: text/plain, Size: 1578 bytes --]
On Wed, Dec 13, 2023 at 08:48:55PM +0200, Andy Shevchenko wrote:
> On Wed, Dec 13, 2023 at 07:33:49PM +0100, Uwe Kleine-König wrote:
> > On Wed, Dec 13, 2023 at 08:16:26PM +0200, Andy Shevchenko wrote:
> > > On Tue, Dec 12, 2023 at 11:20:53AM +0300, Nikita Shubin wrote:
> > > > Drop legacy acquire/release since we are using pinctrl for this now.
>
> ...
>
> > > I think you wanted
> > >
> > > ret = PTR_ERR_OR_ZERO(drv_data->dma_rx_channel);
> > > if (ret)
> > > return dev_err_probe(dev, ret, "rx DMA setup failed");
> >
> > How is that different from
> >
> > if (IS_ERR(drv_data->dma_rx_channel))
> > return dev_err_probe(dev, PTR_ERR(drv_data->dma_rx_channel), "....");
> >
> > (which seems to be more idiomatic to me)? While I was involved in
> > creating PTR_ERR_OR_ZERO, I don't particularily like it (today).
>
> Makes lines shorter, either works for me.
If you want shorter lines, I'd prefer
if (IS_ERR(drv_data->dma_rx_channel)) {
ret = PTR_ERR(drv_data->dma_rx_channel);
return dev_err_probe(dev, ret, "...\n");
}
over
ret = PTR_ERR_OR_ZERO(drv_data->dma_rx_channel);
if (ret)
return dev_err_probe(dev, ret, "\n");
even though it's one line longer because the if body needs curly braces.
I think it's easier to parse for a human which IMHO matters more than
the additional line. But I'm aware that might be subjective.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 20/40] mtd: rawnand: add support for ts72xx
2023-12-12 8:20 ` [PATCH v6 20/40] mtd: rawnand: add support for ts72xx Nikita Shubin via B4 Relay
2023-12-12 8:30 ` Greg Kroah-Hartman
@ 2023-12-15 10:16 ` Miquel Raynal
2023-12-15 12:11 ` Nikita Shubin
1 sibling, 1 reply; 77+ messages in thread
From: Miquel Raynal @ 2023-12-15 10:16 UTC (permalink / raw)
To: Nikita Shubin via B4 Relay
Cc: nikita.shubin, Richard Weinberger, Vignesh Raghavendra,
Arnd Bergmann, Linus Walleij, Christophe Kerello,
Krzysztof Kozlowski, Neil Armstrong, Chris Packham, Johan Jonker,
Greg Kroah-Hartman, Jonathan Cameron, linux-kernel, linux-mtd
Hi Nikita,
devnull+nikita.shubin.maquefel.me@kernel.org wrote on Tue, 12 Dec 2023
11:20:37 +0300:
> From: Nikita Shubin <nikita.shubin@maquefel.me>
>
> Technologic Systems has it's own nand controller implementation in CPLD.
>
> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
I'm fine with this version, I could collect patches 19 and 20 through
mtd but I saw no clear answer to the cover letter, regarding who should
pickup the patches. Let me know what you prefer.
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 20/40] mtd: rawnand: add support for ts72xx
2023-12-15 10:16 ` Miquel Raynal
@ 2023-12-15 12:11 ` Nikita Shubin
2023-12-15 12:27 ` Miquel Raynal
0 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin @ 2023-12-15 12:11 UTC (permalink / raw)
To: Miquel Raynal, Nikita Shubin via B4 Relay, u.kleine-koenig
Cc: Richard Weinberger, Vignesh Raghavendra, Arnd Bergmann,
Linus Walleij, Christophe Kerello, Krzysztof Kozlowski,
Neil Armstrong, Chris Packham, Johan Jonker, Greg Kroah-Hartman,
Jonathan Cameron, linux-kernel, linux-mtd
Hello Miquel and Uwe.
On Fri, 2023-12-15 at 11:16 +0100, Miquel Raynal wrote:
> Hi Nikita,
>
> devnull+nikita.shubin.maquefel.me@kernel.org wrote on Tue, 12 Dec
> 2023
> 11:20:37 +0300:
>
> > From: Nikita Shubin <nikita.shubin@maquefel.me>
> >
> > Technologic Systems has it's own nand controller implementation in
> > CPLD.
> >
> > Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
>
> I'm fine with this version, I could collect patches 19 and 20 through
> mtd but I saw no clear answer to the cover letter, regarding who
> should
> pickup the patches. Let me know what you prefer.
This is still planned going via arm-soc branch, as these patches are
pretty useless without ep93xx totally converted to device tree.
>
> Thanks,
> Miquèl
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 20/40] mtd: rawnand: add support for ts72xx
2023-12-15 12:11 ` Nikita Shubin
@ 2023-12-15 12:27 ` Miquel Raynal
0 siblings, 0 replies; 77+ messages in thread
From: Miquel Raynal @ 2023-12-15 12:27 UTC (permalink / raw)
To: Nikita Shubin
Cc: Nikita Shubin via B4 Relay, u.kleine-koenig, Richard Weinberger,
Vignesh Raghavendra, Arnd Bergmann, Linus Walleij,
Christophe Kerello, Krzysztof Kozlowski, Neil Armstrong,
Chris Packham, Johan Jonker, Greg Kroah-Hartman,
Jonathan Cameron, linux-kernel, linux-mtd
Hi Nikita,
nikita.shubin@maquefel.me wrote on Fri, 15 Dec 2023 15:11:02 +0300:
> Hello Miquel and Uwe.
>
> On Fri, 2023-12-15 at 11:16 +0100, Miquel Raynal wrote:
> > Hi Nikita,
> >
> > devnull+nikita.shubin.maquefel.me@kernel.org wrote on Tue, 12 Dec
> > 2023
> > 11:20:37 +0300:
> >
> > > From: Nikita Shubin <nikita.shubin@maquefel.me>
> > >
> > > Technologic Systems has it's own nand controller implementation in
> > > CPLD.
> > >
> > > Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
> >
> > I'm fine with this version, I could collect patches 19 and 20 through
> > mtd but I saw no clear answer to the cover letter, regarding who
> > should
> > pickup the patches. Let me know what you prefer.
>
> This is still planned going via arm-soc branch, as these patches are
> pretty useless without ep93xx totally converted to device tree.
Alright, so I will not take these patches for the next merge window.
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 04/40] clk: ep93xx: add DT support for Cirrus EP93xx
2023-12-13 17:42 ` Andy Shevchenko
@ 2023-12-23 8:35 ` Nikita Shubin
0 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin @ 2023-12-23 8:35 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Michael Turquette, Stephen Boyd, linux-kernel, linux-clk, Arnd Bergmann
Hello Andy!
On Wed, 2023-12-13 at 19:42 +0200, Andy Shevchenko wrote:
> On Tue, Dec 12, 2023 at 11:20:21AM +0300, Nikita Shubin wrote:
> > Rewrite EP93xx clock driver located in arch/arm/mach-ep93xx/clock.c
> > trying to do everything the device tree way:
> >
> > - provide clock acces via of
> > - drop clk_hw_register_clkdev
> > - drop init code and use module_auxiliary_driver
>
> ...
>
> > +#define EP93XX_I2SCLKDIV_SDIV (1 << 16)
>
> BIT() ?
>
> ...
>
> > +static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
> > +{
> > + struct ep93xx_clk *clk = ep93xx_clk_from(hw);
> > + struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
> > + u32 val;
> > +
> > + regmap_read(priv->map, clk->reg, &val);
> > +
> > + val &= EP93XX_SYSCON_CLKDIV_MASK;
> > +
> > + switch (val) {
> > + case EP93XX_SYSCON_CLKDIV_ESEL:
> > + return 1; /* PLL1 */
> > + case EP93XX_SYSCON_CLKDIV_MASK:
> > + return 2; /* PLL2 */
>
> > + default:
> > + break;
> > + };
> > +
> > + return 0; /* XTALI */
>
> You may return directly from default.
>
> > +}
>
> ...
>
> > +static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
> > +{
> > + struct ep93xx_clk *clk = ep93xx_clk_from(hw);
> > + struct ep93xx_clk_priv *priv = ep93xx_priv_from(clk);
> > + unsigned long flags;
> > + u32 val;
> > +
> > + if (index >= 3)
> > + return -EINVAL;
>
> > + spin_lock_irqsave(&priv->lock, flags);
>
> Why not guard() ?
>
> > + regmap_read(priv->map, clk->reg, &val);
> > + val &= ~(EP93XX_SYSCON_CLKDIV_MASK);
> > + val |= index > 0 ? EP93XX_SYSCON_CLKDIV_ESEL : 0;
> > + val |= index > 1 ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
> > +
> > + ep93xx_clk_write(priv, clk->reg, val);
> > +
> > + spin_unlock_irqrestore(&priv->lock, flags);
> > +
> > + return 0;
> > +}
>
> ...
>
> > +static bool is_best(unsigned long rate, unsigned long now,
> > + unsigned long best)
> > +{
> > + return abs_diff(rate, now) < abs_diff(rate, best);
>
> Have you included necessary header for this?
>
> > +}
>
> ...
>
> > +static int ep93xx_mux_determine_rate(struct clk_hw *hw,
> > + struct clk_rate_request *req)
> > +{
> > + unsigned long best_rate = 0, actual_rate, mclk_rate;
> > + unsigned long rate = req->rate;
>
> > + struct clk_hw *parent_best = NULL;
>
> Strictly speaking you don't need an assignment here as you can
> compare the loop
> variable value against the maximum. But I don't know how heave the
> respective
> CLk call is and if it has no side-effects due to operations inside
> the loop body.
>
> > + unsigned long parent_rate_best;
> > + unsigned long parent_rate;
> > + int div, pdiv;
> > + unsigned int i;
> > +
> > + /*
> > + * Try the two pll's and the external clock
>
> Either comma + 'b' or missing period.
>
> > + * Because the valid predividers are 2, 2.5 and 3, we
> > multiply
> > + * all the clocks by 2 to avoid floating point math.
> > + *
> > + * This is based on the algorithm in the ep93xx raster
> > guide:
> > + * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
> > + *
> > + */
> > + for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
> > + struct clk_hw *parent =
> > clk_hw_get_parent_by_index(hw, i);
> > +
> > + parent_rate = clk_hw_get_rate(parent);
> > + mclk_rate = parent_rate * 2;
> > +
> > + /* Try each predivider value */
> > + for (pdiv = 4; pdiv <= 6; pdiv++) {
> > + div = DIV_ROUND_CLOSEST(mclk_rate, rate *
> > pdiv);
>
> > + if (!in_range(div, 1, 127))
>
> Same header as for abs_diff()?
>
> > + continue;
> > +
> > + actual_rate = DIV_ROUND_CLOSEST(mclk_rate,
> > pdiv * div);
> > + if (is_best(rate, actual_rate, best_rate))
> > {
> > + best_rate = actual_rate;
> > + parent_rate_best = parent_rate;
> > + parent_best = parent;
> > + }
> > + }
>
> (1)
>
> > + }
> > +
> > + if (!parent_best)
> > + return -EINVAL;
> > +
> > + req->best_parent_rate = parent_rate_best;
> > + req->best_parent_hw = parent_best;
> > + req->rate = best_rate;
> > +
> > + return 0;
> > +}
>
> ...
>
> > + mclk_rate = parent_rate * 2;
> > +
> > + for (pdiv = 4; pdiv <= 6; pdiv++) {
> > + div = DIV_ROUND_CLOSEST(mclk_rate, rate * pdiv);
> > + if (!in_range(div, 1, 127))
> > + continue;
> > +
> > + actual_rate = DIV_ROUND_CLOSEST(mclk_rate, pdiv *
> > div);
> > + if (abs(actual_rate - rate) < rate_err) {
> > + npdiv = pdiv - 3;
> > + ndiv = div;
> > + rate_err = abs(actual_rate - rate);
> > + }
> > + }
>
> Looks very similar to (1). Can be deduplicated?
It was my thought on first iterations of clk, unfortunately i don't see
any good way to combine them:
- mux_determine_rate is searching the best parent that meet the
criteria
- set_rate is searching the actual dividers to write, so difference is
minimum
Combining them into one doesn't make it more understandable.
>
> ...
>
> > + /*
> > + * Clear old dividers
> > + * Bit 7 is reserved bit in all ClkDiv registers
>
> Missing periods.
>
> > + */
>
> ...
>
> > +static unsigned long calc_pll_rate(u64 rate, u32 config_word)
> > +{
> > + rate *= ((config_word >> 11) & GENMASK(4, 0)) + 1; /*
> > X1FBD */
> > + rate *= ((config_word >> 5) & GENMASK(5, 0)) + 1; /*
> > X2FBD */
> > + do_div(rate, (config_word & GENMASK(4, 0)) + 1); /*
> > X2IPD */
>
> > + rate >>= ((config_word >> 16) & GENMASK(1, 0)); /*
> > PS */
>
> Outer parentheses are redundant.
>
> > + return rate;
> > +}
>
> ...
>
> > + /*
> > + * EP93xx SSP clock rate was doubled in version E2. For
> > more information
> > + * see:
> > + * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
>
> Can you point to the specific section? Like
>
> * see section 1.2.3 "Foo bar":
>
> > + */
>
> ...
>
> > + /* touchscreen/adc clock */
>
> ADC
>
> ...
>
> > + /*
> > + * On reset PDIV and VDIV is set to zero, while PDIV zero
> > + * means clock disable, VDIV shouldn't be zero.
> > + * So we set both video and is2 dividers to minimum.
>
> i2s?
>
> > + * ENA - Enable CLK divider.
> > + * PDIV - 00 - Disable clock
> > + * VDIV - at least 2
> > + */
>
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 05/40] pinctrl: add a Cirrus ep93xx SoC pin controller
2023-12-13 17:51 ` Andy Shevchenko
@ 2023-12-23 8:55 ` Nikita Shubin
0 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin @ 2023-12-23 8:55 UTC (permalink / raw)
To: Andy Shevchenko; +Cc: Linus Walleij, linux-kernel, linux-gpio, Arnd Bergmann
Hello Andy!
On Wed, 2023-12-13 at 19:51 +0200, Andy Shevchenko wrote:
> On Tue, Dec 12, 2023 at 11:20:22AM +0300, Nikita Shubin wrote:
> > Add a pin control (only multiplexing) driver for ep93xx SoC so
> > we can fully convert ep93xx to device tree.
> >
> > This driver is capable of muxing ep9301/ep9302/ep9307/ep9312/ep9315
> > variants, this is chosen based on "compatible" in device tree.
>
> Mostly nit-picks below, with the exception to setting device node.
> See below.
>
> ...
>
> > +/*
> > + * There are several system configuration options selectable by
> > the DeviceCfg and SysCfg
> > + * registers. These registers provide the selection of several pin
> > multiplexing options and also
> > + * provide software access to the system reset configuration
> > options. Please refer to the
> > + * descriptions of the registers, “DeviceCfg” on page 5-25 and
> > “SysCfg” on page 5-34, for a
> > + * detailed explanation.
> > + */
> > +#define EP93XX_SYSCON_DEVCFG_D1ONG BIT(30) /* not used */
> > +#define EP93XX_SYSCON_DEVCFG_D0ONG BIT(29) /* not used */
> > +#define EP93XX_SYSCON_DEVCFG_IONU2 BIT(28) /* not used */
> > +#define EP93XX_SYSCON_DEVCFG_GONK BIT(27) /* done */
> > +#define EP93XX_SYSCON_DEVCFG_TONG BIT(26) /* not used */
> > +#define EP93XX_SYSCON_DEVCFG_MONG BIT(25) /* not used */
> > +#define EP93XX_SYSCON_DEVCFG_A2ONG BIT(22) /* not used */
> > +#define EP93XX_SYSCON_DEVCFG_A1ONG BIT(21) /* not used */
> > +#define EP93XX_SYSCON_DEVCFG_HONIDE BIT(11) /* done */
> > +#define EP93XX_SYSCON_DEVCFG_GONIDE BIT(10) /* done */
> > +#define EP93XX_SYSCON_DEVCFG_PONG BIT(9) /* done */
> > +#define EP93XX_SYSCON_DEVCFG_EONIDE BIT(8) /* done */
> > +#define EP93XX_SYSCON_DEVCFG_I2SONSSP BIT(7) /* done */
> > +#define EP93XX_SYSCON_DEVCFG_I2SONAC97 BIT(6) /* done */
> > +#define EP93XX_SYSCON_DEVCFG_RASONP3 BIT(4) /* done */
>
> What are these comments supposed to mean?
>
> ...
>
> > +static const struct pinctrl_ops ep93xx_pctrl_ops = {
> > + .get_groups_count = ep93xx_get_groups_count,
> > + .get_group_name = ep93xx_get_group_name,
> > + .get_group_pins = ep93xx_get_group_pins,
>
> > + .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
> > + .dt_free_map = pinconf_generic_dt_free_map,
>
> Hmm... Don you need to ifdef these fields?
From now on we can't live without CONFIG_OF, so i don't think it's
necessary.
>
> > +};
>
> ...
>
> > +static const struct pinfunction ep93xx_pmx_functions[] = {
> > + PINCTRL_PINFUNCTION("spi", spigrps, ARRAY_SIZE(spigrps)),
>
> Is array_size.h being included?
>
> > + PINCTRL_PINFUNCTION("ac97", ac97grps,
> > ARRAY_SIZE(ac97grps)),
> > + PINCTRL_PINFUNCTION("i2s", i2sgrps, ARRAY_SIZE(i2sgrps)),
> > + PINCTRL_PINFUNCTION("pwm", pwm1grps, ARRAY_SIZE(pwm1grps)),
> > + PINCTRL_PINFUNCTION("keypad", keypadgrps,
> > ARRAY_SIZE(keypadgrps)),
> > + PINCTRL_PINFUNCTION("pata", idegrps, ARRAY_SIZE(idegrps)),
> > + PINCTRL_PINFUNCTION("lcd", rastergrps,
> > ARRAY_SIZE(rastergrps)),
> > + PINCTRL_PINFUNCTION("gpio", gpiogrps,
> > ARRAY_SIZE(gpiogrps)),
> > +};
>
> ...
>
> > + switch (pmx->model) {
> > + case EP93XX_9301_PINCTRL:
> > + grp = &ep9301_pin_groups[group];
> > + break;
> > + case EP93XX_9307_PINCTRL:
> > + grp = &ep9307_pin_groups[group];
> > + break;
> > + case EP93XX_9312_PINCTRL:
> > + grp = &ep9312_pin_groups[group];
> > + break;
>
> default?
>
> > + }
>
> ...
>
> > + pmx->model = (int)(uintptr_t)id->driver_data;
>
> Is the model defined as int (signed)?
>
> Otherwise can we use proper type?
>
> ...
>
> > + /* using parent of_node to match in
> > get_pinctrl_dev_from_of_node() */
> > + device_set_of_node_from_dev(dev, adev->dev.parent);
>
> Hmm... This takes references in comparison to device_set_node(). Is
> it intended?
Nope, switched to "device_set_node(dev, dev_fwnode(adev-dev.parent));".
>
> ...
>
> > + pmx->pctl = devm_pinctrl_register(dev, &ep93xx_pmx_desc,
> > pmx);
> > + if (IS_ERR(pmx->pctl))
> > + return dev_err_probe(dev, PTR_ERR(pmx->pctl),
> > "could not register pinmux driver\n");
>
> It can be written as
>
> pmx->pctl = devm_pinctrl_register(dev, &ep93xx_pmx_desc,
> pmx);
> ret = PTR_ERR_OR_ZERO(...);
> if (ret)
> return dev_err_probe(dev, ret, "could not register
> pinmux driver\n");
>
> (makes line shorter). But it's up to you.
>
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 00/40] ep93xx device tree conversion
2023-12-13 17:59 ` Andy Shevchenko
@ 2023-12-23 9:12 ` Nikita Shubin
2023-12-25 19:55 ` Andy Shevchenko
0 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin @ 2023-12-23 9:12 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Hartley Sweeten, Alexander Sverdlin, Russell King,
Lukasz Majewski, Linus Walleij, Bartosz Golaszewski,
Michael Turquette, Stephen Boyd, Sebastian Reichel, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vinod Koul, Wim Van Sebroeck,
Guenter Roeck, Thierry Reding, Uwe Kleine-König, Mark Brown,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Damien Le Moal, Sergey Shtylyov, Dmitry Torokhov, Liam Girdwood,
Jaroslav Kysela, Takashi Iwai, linux-arm-kernel, linux-kernel,
linux-gpio, linux-clk, linux-pm, devicetree, dmaengine,
linux-watchdog, linux-pwm, linux-spi, netdev, linux-mtd,
linux-ide, linux-input, linux-sound, Arnd Bergmann,
Bartosz Golaszewski, Krzysztof Kozlowski, Andrew Lunn
Hello Andy!
On Wed, 2023-12-13 at 19:59 +0200, Andy Shevchenko wrote:
> On Tue, Dec 12, 2023 at 11:20:17AM +0300, Nikita Shubin wrote:
> > No major changes since last version all changes are cometic.
> >
> > Following patches require attention from Stephen Boyd, as they were
> > converted to aux_dev as suggested:
> >
> > - ARM: ep93xx: add regmap aux_dev
> > - clk: ep93xx: add DT support for Cirrus EP93xx
> >
> > DMA related patches still require Acked or Reviewed tags.
> >
> > got approval LGTM from Miquel:
> > - mtd: rawnand: add support for ts72xx
> > Link: https://lore.kernel.org/lkml/20231004103911.2aa65354@xps-13/
> >
> > new patches:
> >
> > ARM: ep93xx: Add terminator to gpiod_lookup_table
> > - fixed terminator in gpiod_lockup_table
> >
> > So mostly all patches got approval.
> >
> > Patches should be now formated with '--histogram'
>
> It _feels_ like some tags might be missing.
> In any case I suggest to use `b4` tool to retrieve tags when
> preparing
> the next version:
>
> git checkout -b vXX v6.7-rcX
> b4 am -slt $MSG_ID_OF_v(XX-1)
> git am ...
> git rebase --interactive ... # to address comments
>
I moved to b4 a few iterations ago:
```
Calculating patch-ids from commits, this may take a moment...
Checking change-id "20230605-ep93xx-01c76317e2d2"
Grabbing search results from lore.kernel.org
Grabbing thread from lore.kernel.org/all/20230424123522.18302-1-
nikita.shubin%40maquefel.me/t.mbox.gz
---
NOTE: some trailers ignored due to from/email mismatches:
! Trailer: Tested-by: Michael Peters <mpeters@embeddedTS.com>
Msg From: Kris Bahnsen <kris@embeddedTS.com>
NOTE: Rerun with -S to apply them anyway
No trailer updates found.
```
I haven't found any missing tags, that b4 didn't apply, the ones above
refer to a very old iteration and were given to cover letter and i
don't feel like they need to be included.
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 40/40] dma: cirrus: remove platform code
2023-12-13 18:30 ` Andy Shevchenko
@ 2023-12-23 9:49 ` Nikita Shubin
0 siblings, 0 replies; 77+ messages in thread
From: Nikita Shubin @ 2023-12-23 9:49 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Vinod Koul, Alexander Sverdlin, linux-kernel, dmaengine, Arnd Bergmann
On Wed, 2023-12-13 at 20:30 +0200, Andy Shevchenko wrote:
> On Tue, Dec 12, 2023 at 11:20:57AM +0300, Nikita Shubin wrote:
> > Remove DMA platform header, from now on we use device tree for dma
>
> DMA
>
> > clients.
>
> ...
>
> > +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
> > +{
> > + if (device_is_compatible(chan->device->dev, "cirrus,ep9301-
> > dma-m2p"))
> > + return true;
> > +
> > + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-
> > m2p");
> > +}
>
> Hmm... Isn't the same as new helper in a header in another patch?
>
Indeed it's internal now. Move here from platform header.
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 08/40] soc: Add SoC driver for Cirrus ep93xx
2023-12-13 18:37 ` Andy Shevchenko
@ 2023-12-23 10:06 ` Nikita Shubin
2023-12-23 11:32 ` Arnd Bergmann
0 siblings, 1 reply; 77+ messages in thread
From: Nikita Shubin @ 2023-12-23 10:06 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Conor Dooley, Ulf Hansson, Joel Stanley, Walker Chen,
Jonathan Neuschäfer, Huisong Li, Arnd Bergmann, Wei Xu,
Emil Renner Berthing, Linus Walleij, Alexander Sverdlin,
Hal Feng, linux-kernel
On Wed, 2023-12-13 at 20:37 +0200, Andy Shevchenko wrote:
> On Tue, Dec 12, 2023 at 11:20:25AM +0300, Nikita Shubin wrote:
> > Add an SoC driver for the ep93xx. Currently there is only one thing
> > not fitting into any other framework, and that is the swlock
> > setting.
>
> ...
>
> > +/*
> > + * SoC driver for Cirrus EP93xx chips.
> > + * Copyright (C) 2022 Nikita Shubin <nikita.shubin@maquefel.me>
> > + *
> > + * Based on a rewrite of arch/arm/mach-ep93xx/core.c
> > + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
> > + * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
> > + *
> > + * Thanks go to Michael Burian and Ray Lehtiniemi for their key
> > + * role in the ep93xx Linux community
>
> Missing period.
>
> > + */
>
> ...
>
> > +#include <linux/bits.h>
> > +#include <linux/init.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/of.h>
> > +#include <linux/of_fdt.h>
> > +#include <linux/platform_device.h>
>
> Isn't this an incorrect header and should be auxiliary one?
This is still a platform driver, pinctrl, clk and reset are auxiliary
ones.
>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
>
> + spinlock.h ?
>
> But since it's a new code, why not cleanup.h?
>
> > +#include <linux/sys_soc.h>
>
> ...
>
> > + enum ep93xx_soc_model model =
> > (int)(uintptr_t)of_device_get_match_data(&pdev->dev);
>
> int?
>
> Maybe
>
> strict device *dev = &pdev->dev;
> enum ep93xx_soc_model model;
> ...
> model = (enum
> ep93xx_soc_model)(uintptr_t)device_get_match_data(dev);
>
> ?
>
> ...
>
> > + struct device *dev = &pdev->dev;
>
> Ah you even have this already!
>
> ...
>
> > + dev_info(dev, "EP93xx SoC revision %s\n", attrs->revision);
>
> Hmm... Is this message anyhow useful?
>
Can we keep it please ? It makes us happy when we see it in logs for
historical reasons - it's been there since 2.4.
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 08/40] soc: Add SoC driver for Cirrus ep93xx
2023-12-23 10:06 ` Nikita Shubin
@ 2023-12-23 11:32 ` Arnd Bergmann
0 siblings, 0 replies; 77+ messages in thread
From: Arnd Bergmann @ 2023-12-23 11:32 UTC (permalink / raw)
To: Nikita Shubin, Andy Shevchenko
Cc: Conor.Dooley, Ulf Hansson, Joel Stanley, Walker Chen,
Jonathan Neuschäfer, Huisong Li, Wei Xu,
Emil Renner Berthing, Linus Walleij, Alexander Sverdlin,
Hal Feng, linux-kernel
On Sat, Dec 23, 2023, at 10:06, Nikita Shubin wrote:
> On Wed, 2023-12-13 at 20:37 +0200, Andy Shevchenko wrote:
>> On Tue, Dec 12, 2023 at 11:20:25AM +0300, Nikita Shubin wrote:
>>
>> Maybe
>>
>> strict device *dev = &pdev->dev;
>> enum ep93xx_soc_model model;
>> ...
>> model = (enum
>> ep93xx_soc_model)(uintptr_t)device_get_match_data(dev);
>>
>> ?
You can just skip the second cast:
model = (uintptr_t)device_get_match_data(dev);
or even better, since the only thing you look up by model is the
string put the string directly into the data:
+static const struct of_device_id ep9301_syscon_of_device_ids[] = {
+ { .compatible = "cirrus,ep9301-syscon", .data = "pinctrl-ep9301" },
+ { .compatible = "cirrus,ep9302-syscon", .data = "pinctrl-ep9301" },
+ { .compatible = "cirrus,ep9307-syscon", .data = "pinctrl-ep9307" },
+ { .compatible = "cirrus,ep9312-syscon", .data = "pinctrl-ep9312" },
+ { .compatible = "cirrus,ep9315-syscon", .data = "pinctrl-ep9312" },
+ { /* sentinel */ }
+};
Since the strings are constants, gcc should even be able to deduplicate them.
>>
>> > + dev_info(dev, "EP93xx SoC revision %s\n", attrs->revision);
>>
>> Hmm... Is this message anyhow useful?
>>
>
> Can we keep it please ? It makes us happy when we see it in logs for
> historical reasons - it's been there since 2.4.
In general we don't do these at all, but since you are likely the only
person paying attention to this particular one, you may as well keep it.
Arnd
^ permalink raw reply [flat|nested] 77+ messages in thread
* Re: [PATCH v6 00/40] ep93xx device tree conversion
2023-12-23 9:12 ` Nikita Shubin
@ 2023-12-25 19:55 ` Andy Shevchenko
0 siblings, 0 replies; 77+ messages in thread
From: Andy Shevchenko @ 2023-12-25 19:55 UTC (permalink / raw)
To: Nikita Shubin
Cc: Andy Shevchenko, Hartley Sweeten, Alexander Sverdlin,
Russell King, Lukasz Majewski, Linus Walleij,
Bartosz Golaszewski, Michael Turquette, Stephen Boyd,
Sebastian Reichel, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vinod Koul, Wim Van Sebroeck, Guenter Roeck,
Thierry Reding, Uwe Kleine-König, Mark Brown,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Damien Le Moal, Sergey Shtylyov, Dmitry Torokhov, Liam Girdwood,
Jaroslav Kysela, Takashi Iwai, linux-arm-kernel, linux-kernel,
linux-gpio, linux-clk, linux-pm, devicetree, dmaengine,
linux-watchdog, linux-pwm, linux-spi, netdev, linux-mtd,
linux-ide, linux-input, linux-sound, Arnd Bergmann,
Bartosz Golaszewski, Krzysztof Kozlowski, Andrew Lunn
On Sat, Dec 23, 2023 at 11:13 AM Nikita Shubin
<nikita.shubin@maquefel.me> wrote:
> On Wed, 2023-12-13 at 19:59 +0200, Andy Shevchenko wrote:
...
> I haven't found any missing tags, that b4 didn't apply, the ones above
> refer to a very old iteration and were given to cover letter and i
> don't feel like they need to be included.
When somebody gives you a tag against a cover letter, it means the
entire series (if not spelled differently). `b4` even has a parameter
-t for that IIRC.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 77+ messages in thread
end of thread, other threads:[~2023-12-25 19:55 UTC | newest]
Thread overview: 77+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-12-12 8:20 [PATCH v6 00/40] ep93xx device tree conversion Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 01/40] ARM: ep93xx: Add terminator to gpiod_lookup_table Nikita Shubin via B4 Relay
2023-12-13 17:24 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 02/40] gpio: ep93xx: split device in multiple Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 03/40] ARM: ep93xx: add regmap aux_dev Nikita Shubin via B4 Relay
2023-12-13 17:28 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 04/40] clk: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
2023-12-13 17:42 ` Andy Shevchenko
2023-12-23 8:35 ` Nikita Shubin
2023-12-12 8:20 ` [PATCH v6 05/40] pinctrl: add a Cirrus ep93xx SoC pin controller Nikita Shubin via B4 Relay
2023-12-13 17:51 ` Andy Shevchenko
2023-12-23 8:55 ` Nikita Shubin
2023-12-12 8:20 ` [PATCH v6 06/40] power: reset: Add a driver for the ep93xx reset Nikita Shubin via B4 Relay
2023-12-13 17:54 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 07/40] dt-bindings: soc: Add Cirrus EP93xx Nikita Shubin via B4 Relay
2023-12-13 6:53 ` Krzysztof Kozlowski
2023-12-12 8:20 ` [PATCH v6 08/40] soc: Add SoC driver for Cirrus ep93xx Nikita Shubin via B4 Relay
2023-12-13 18:37 ` Andy Shevchenko
2023-12-23 10:06 ` Nikita Shubin
2023-12-23 11:32 ` Arnd Bergmann
2023-12-12 8:20 ` [PATCH v6 09/40] dt-bindings: dma: Add Cirrus EP93xx Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 10/40] dma: cirrus: Convert to DT for " Nikita Shubin via B4 Relay
2023-12-13 18:28 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 11/40] dt-bindings: watchdog: Add Cirrus EP93x Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 12/40] watchdog: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
2023-12-13 17:56 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 13/40] dt-bindings: pwm: Add " Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 14/40] pwm: ep93xx: add DT support for " Nikita Shubin via B4 Relay
2023-12-13 17:56 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 15/40] dt-bindings: spi: Add " Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 16/40] spi: ep93xx: add DT support for " Nikita Shubin via B4 Relay
2023-12-13 18:13 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 17/40] dt-bindings: net: Add " Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 18/40] net: cirrus: add DT support for " Nikita Shubin via B4 Relay
2023-12-13 18:39 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 19/40] dt-bindings: mtd: Add ts7200 nand-controller Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 20/40] mtd: rawnand: add support for ts72xx Nikita Shubin via B4 Relay
2023-12-12 8:30 ` Greg Kroah-Hartman
2023-12-12 8:35 ` Nikita Shubin
2023-12-12 14:05 ` Miquel Raynal
2023-12-15 10:16 ` Miquel Raynal
2023-12-15 12:11 ` Nikita Shubin
2023-12-15 12:27 ` Miquel Raynal
2023-12-12 8:20 ` [PATCH v6 21/40] dt-bindings: ata: Add Cirrus EP93xx Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 22/40] ata: pata_ep93xx: add device tree support Nikita Shubin via B4 Relay
2023-12-13 18:19 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 23/40] dt-bindings: input: Add Cirrus EP93xx keypad Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 24/40] input: keypad: ep93xx: add DT support for Cirrus EP93xx Nikita Shubin via B4 Relay
2023-12-13 18:41 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 25/40] dt-bindings: wdt: Add ts72xx Nikita Shubin via B4 Relay
2023-12-12 15:03 ` Guenter Roeck
2023-12-12 8:20 ` [PATCH v6 26/40] wdt: ts72xx: add DT support for ts72xx Nikita Shubin via B4 Relay
2023-12-13 18:10 ` Andy Shevchenko
2023-12-12 8:20 ` [PATCH v6 27/40] gpio: ep93xx: add DT support for gpio-ep93xx Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 28/40] ASoC: dt-bindings: ep93xx: Document DMA support Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 29/40] ASoC: dt-bindings: ep93xx: Document Audio Port support Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 30/40] ASoC: ep93xx: Drop legacy DMA support Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 31/40] ARM: dts: add Cirrus EP93XX SoC .dtsi Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 32/40] ARM: dts: ep93xx: add ts7250 board Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 33/40] ARM: dts: ep93xx: Add EDB9302 DT Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 34/40] ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 35/40] pwm: ep93xx: drop legacy pinctrl Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use Nikita Shubin via B4 Relay
2023-12-13 18:16 ` Andy Shevchenko
2023-12-13 18:33 ` Uwe Kleine-König
2023-12-13 18:48 ` Andy Shevchenko
2023-12-14 10:26 ` Uwe Kleine-König
2023-12-12 8:20 ` [PATCH v6 37/40] ARM: ep93xx: delete all boardfiles Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 38/40] ARM: ep93xx: soc: drop defines Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 39/40] ASoC: cirrus: edb93xx: Delete driver Nikita Shubin via B4 Relay
2023-12-12 8:20 ` [PATCH v6 40/40] dma: cirrus: remove platform code Nikita Shubin via B4 Relay
2023-12-13 18:30 ` Andy Shevchenko
2023-12-23 9:49 ` Nikita Shubin
2023-12-12 11:53 ` [PATCH v6 00/40] ep93xx device tree conversion Uwe Kleine-König
2023-12-13 17:59 ` Andy Shevchenko
2023-12-23 9:12 ` Nikita Shubin
2023-12-25 19:55 ` Andy Shevchenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).