From: Sander Vanheule <sander@svanheule.net>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Michael Walle <michael@walle.cc>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Linux LED Subsystem <linux-leds@vger.kernel.org>,
devicetree <devicetree@vger.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
Andrew Lunn <andrew@lunn.ch>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
kernel test robot <lkp@intel.com>
Subject: Re: [PATCH v2 5/7] mfd: Add RTL8231 core device
Date: Mon, 24 May 2021 09:50:02 +0200 [thread overview]
Message-ID: <33eb043f2ef9d81bbe26876a1c73859f56a8abd9.camel@svanheule.net> (raw)
In-Reply-To: <CAHp75Vc5a4PsHsJ2sNsRNT7BaBJ=Kxb+KKM7x7jWeRdOS8WfnQ@mail.gmail.com>
Hi Andy,
I forgot to address one of your questions, so here's a short follow up.
On Tue, 2021-05-18 at 00:18 +0300, Andy Shevchenko wrote:
> On Mon, May 17, 2021 at 10:28 PM Sander Vanheule <sander@svanheule.net> wrote:
> > + err = regmap_read(map, RTL8231_REG_FUNC1, &v);
>
> > + ready_code = FIELD_GET(RTL8231_FUNC1_READY_CODE_MASK, v);
>
> If we got an error why we need a read_core, what for?
The chip has a static 5-bit field in register 0x01, called READY_CODE according
to the datasheet. If a device is present, and a read from register 0x01
succeeds, I still check that this field has the correct value. For the RTL8231,
it should return 0x37. If this isn't the case, I assume this isn't an RTL8231,
so the driver probe stops and returns an error value.
Best,
Sander
next prev parent reply other threads:[~2021-05-24 7:50 UTC|newest]
Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 12:25 [PATCH 0/5] RTL8231 GPIO expander support Sander Vanheule
2021-05-11 12:25 ` [PATCH 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-05-17 22:31 ` Rob Herring
2021-05-19 16:39 ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 2/5] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-17 22:38 ` Rob Herring
2021-05-19 16:53 ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 3/5] mfd: Add RTL8231 core device Sander Vanheule
2021-05-12 12:29 ` kernel test robot
2021-05-12 13:13 ` kernel test robot
2021-05-19 14:58 ` Lee Jones
2021-05-19 15:11 ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 4/5] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-11 12:25 ` [PATCH 5/5] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
[not found] ` <CAHp75VffoKyyPJbdtKMLx575c9LT0S8+EHOk7Mw36j=aTL6Q4Q@mail.gmail.com>
2021-05-16 21:40 ` [PATCH 0/5] RTL8231 GPIO expander support Sander Vanheule
2021-05-17 8:13 ` Andy Shevchenko
2021-05-17 8:50 ` Sander Vanheule
2021-05-17 19:32 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 0/7] " Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 1/7] regmap: Add MDIO bus support Sander Vanheule
2021-05-19 16:12 ` Mark Brown
2021-05-17 19:28 ` [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order Sander Vanheule
2021-05-17 21:06 ` Andy Shevchenko
2021-05-18 1:40 ` Andrew Lunn
2021-05-18 11:39 ` Sander Vanheule
2021-05-23 22:21 ` Sander Vanheule
2021-05-18 8:39 ` Michael Walle
2021-05-18 10:39 ` Andy Shevchenko
2021-05-23 21:19 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 3/7] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 4/7] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-18 22:02 ` Linus Walleij
2021-05-17 19:28 ` [PATCH v2 5/7] mfd: Add RTL8231 core device Sander Vanheule
2021-05-17 21:18 ` Andy Shevchenko
2021-05-23 21:28 ` Sander Vanheule
2021-05-24 7:49 ` Andy Shevchenko
2021-05-24 7:50 ` Sander Vanheule [this message]
2021-05-24 7:55 ` Andy Shevchenko
2021-05-24 8:04 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-17 21:42 ` Andy Shevchenko
2021-05-17 21:46 ` Andy Shevchenko
2021-05-23 21:42 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 7/7] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-05-17 22:00 ` Andy Shevchenko
2021-05-23 21:53 ` Sander Vanheule
2021-05-19 16:10 ` (subset) [PATCH v2 0/7] RTL8231 GPIO expander support Mark Brown
2021-05-23 22:33 ` [PATCH v3 0/6] " Sander Vanheule
2021-05-23 22:33 ` [PATCH v3 1/6] gpio: regmap: Add quirk for output data register Sander Vanheule
2021-05-28 6:40 ` Michael Walle
2021-06-03 10:03 ` Sander Vanheule
2021-05-31 7:25 ` Bartosz Golaszewski
2021-05-23 22:34 ` [PATCH v3 2/6] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-06-02 18:58 ` Rob Herring
2021-05-23 22:34 ` [PATCH v3 3/6] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-27 23:31 ` Linus Walleij
2021-06-02 19:02 ` Rob Herring
2021-05-23 22:34 ` [PATCH v3 4/6] mfd: Add RTL8231 core device Sander Vanheule
2021-05-24 8:02 ` Andy Shevchenko
2021-05-24 8:23 ` Sander Vanheule
2021-05-24 10:18 ` Andy Shevchenko
2021-05-24 11:41 ` Sander Vanheule
2021-05-23 22:34 ` [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-28 6:29 ` Michael Walle
2021-05-28 6:42 ` Sander Vanheule
2021-05-28 6:43 ` Michael Walle
2021-05-23 22:34 ` [PATCH v3 6/6] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-05-24 10:24 ` Andy Shevchenko
2021-05-24 12:04 ` Sander Vanheule
2021-05-24 12:47 ` Andy Shevchenko
2021-05-24 15:30 ` Sander Vanheule
2021-05-24 1:10 ` [PATCH v3 0/6] RTL8231 GPIO expander support Andrew Lunn
2021-05-24 7:53 ` Andy Shevchenko
2021-05-24 11:41 ` Sander Vanheule
2021-05-24 12:54 ` Andy Shevchenko
2021-05-24 15:03 ` Sander Vanheule
2021-05-24 16:30 ` Andy Shevchenko
2021-05-25 17:11 ` Andy Shevchenko
2021-05-25 18:00 ` Sander Vanheule
2021-05-26 21:02 ` Sander Vanheule
2021-05-27 10:38 ` Andy Shevchenko
2021-05-27 10:41 ` Hans de Goede
2021-05-24 15:20 ` Sander Vanheule
2021-05-28 6:37 ` Michael Walle
2021-05-30 16:19 ` Sander Vanheule
2021-05-30 16:51 ` Hans de Goede
2021-05-30 18:16 ` Andy Shevchenko
2021-05-30 21:22 ` Michael Walle
2021-05-31 8:36 ` Sander Vanheule
2021-05-31 10:02 ` Michael Walle
[not found] ` <CAHp75VfOrUBRQH1vrXEwHN4ZPojQfQju-_wp_3djZeozEaatug@mail.gmail.com>
2021-05-31 15:33 ` [PATCH 0/5] " Sander Vanheule
2021-05-31 15:48 ` Andy Shevchenko
2021-06-01 11:49 ` Michael Walle
2021-06-01 15:24 ` Andy Shevchenko
2021-06-02 20:20 ` Sander Vanheule
2021-06-01 9:59 ` [PATCH v3 0/6] " Linus Walleij
2021-06-01 10:18 ` Michael Walle
2021-06-01 10:51 ` Linus Walleij
2021-06-01 11:41 ` Michael Walle
2021-06-01 11:48 ` Linus Walleij
2021-06-03 10:00 ` [PATCH v4 0/5] " Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 2/5] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 3/5] mfd: Add RTL8231 core device Sander Vanheule
2021-06-03 10:58 ` Andy Shevchenko
2021-06-03 11:28 ` Sander Vanheule
2021-06-03 14:03 ` Andrew Lunn
2021-06-03 15:20 ` Sander Vanheule
2021-06-05 11:07 ` Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-06-03 10:18 ` Andy Shevchenko
2021-06-04 22:10 ` Linus Walleij
2021-06-03 10:00 ` [PATCH v4 5/5] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-06-03 11:01 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=33eb043f2ef9d81bbe26876a1c73859f56a8abd9.camel@svanheule.net \
--to=sander@svanheule.net \
--cc=andrew@lunn.ch \
--cc=andy.shevchenko@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=lkp@intel.com \
--cc=michael@walle.cc \
--cc=pavel@ucw.cz \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).