* [PATCH 0/4] ARM: at91: remove !DT support for at91sam9260/9g20 and at91sam9263
@ 2014-11-19 10:31 Nicolas Ferre
2014-11-19 10:31 ` [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support Nicolas Ferre
` (3 more replies)
0 siblings, 4 replies; 13+ messages in thread
From: Nicolas Ferre @ 2014-11-19 10:31 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Jean-Christophe PLAGNIOL-VILLARD, Boris BREZILLON,
Alexandre Belloni, Ludovic Desroches, Nicolas Ferre
As announced here https://lkml.org/lkml/2014/9/10/293 ([ANNOUNCE] ARM: at91:
removal of board files) two months ago, we are continuing the work to remove
the non-Device-Tree board support for older Atmel SoCs.
This series is for at91sam9260/9g20 and at91sam9263. The DT must be used for
these SoCs.
The diffstat is pretty big this time.
Bye,
Nicolas Ferre (4):
ARM: at91: remove at91sam9263 legacy board support
ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files
ARM: at91: remove at91sam9260/at91sam9g20 legacy board support
ARM: at91/Kconfig: remove unused config options
arch/arm/configs/at91sam9260_9g20_defconfig | 145 ---
arch/arm/configs/at91sam9263_defconfig | 151 ---
arch/arm/mach-at91/Kconfig.non_dt | 138 ---
arch/arm/mach-at91/Makefile | 24 -
arch/arm/mach-at91/at91sam9260.c | 397 -------
arch/arm/mach-at91/at91sam9260_devices.c | 1364 ------------------------
arch/arm/mach-at91/at91sam9263.c | 399 -------
arch/arm/mach-at91/at91sam9263_devices.c | 1538 ---------------------------
arch/arm/mach-at91/board-afeb-9260v1.c | 223 ----
arch/arm/mach-at91/board-cam60.c | 199 ----
arch/arm/mach-at91/board-cpu9krea.c | 386 -------
arch/arm/mach-at91/board-flexibity.c | 171 ---
arch/arm/mach-at91/board-gsia18s.c | 585 ----------
arch/arm/mach-at91/board-pcontrol-g20.c | 228 ----
arch/arm/mach-at91/board-sam9-l9260.c | 230 ----
arch/arm/mach-at91/board-sam9260ek.c | 354 ------
arch/arm/mach-at91/board-sam9263ek.c | 493 ---------
arch/arm/mach-at91/board-sam9g20ek.c | 429 --------
arch/arm/mach-at91/board-snapper9260.c | 191 ----
arch/arm/mach-at91/board-stamp9g20.c | 294 -----
arch/arm/mach-at91/stamp9g20.h | 7 -
drivers/misc/Kconfig | 2 +-
drivers/rtc/Kconfig | 4 +-
drivers/video/backlight/Kconfig | 1 -
24 files changed, 2 insertions(+), 7951 deletions(-)
delete mode 100644 arch/arm/configs/at91sam9260_9g20_defconfig
delete mode 100644 arch/arm/configs/at91sam9263_defconfig
delete mode 100644 arch/arm/mach-at91/at91sam9260_devices.c
delete mode 100644 arch/arm/mach-at91/at91sam9263_devices.c
delete mode 100644 arch/arm/mach-at91/board-afeb-9260v1.c
delete mode 100644 arch/arm/mach-at91/board-cam60.c
delete mode 100644 arch/arm/mach-at91/board-cpu9krea.c
delete mode 100644 arch/arm/mach-at91/board-flexibity.c
delete mode 100644 arch/arm/mach-at91/board-gsia18s.c
delete mode 100644 arch/arm/mach-at91/board-pcontrol-g20.c
delete mode 100644 arch/arm/mach-at91/board-sam9-l9260.c
delete mode 100644 arch/arm/mach-at91/board-sam9260ek.c
delete mode 100644 arch/arm/mach-at91/board-sam9263ek.c
delete mode 100644 arch/arm/mach-at91/board-sam9g20ek.c
delete mode 100644 arch/arm/mach-at91/board-snapper9260.c
delete mode 100644 arch/arm/mach-at91/board-stamp9g20.c
delete mode 100644 arch/arm/mach-at91/stamp9g20.h
--
2.1.3
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support
2014-11-19 10:31 [PATCH 0/4] ARM: at91: remove !DT support for at91sam9260/9g20 and at91sam9263 Nicolas Ferre
@ 2014-11-19 10:31 ` Nicolas Ferre
2014-11-19 10:38 ` Nicolas Ferre
2014-12-01 11:52 ` Paul Bolle
2014-11-19 10:31 ` [PATCH 2/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files Nicolas Ferre
` (2 subsequent siblings)
3 siblings, 2 replies; 13+ messages in thread
From: Nicolas Ferre @ 2014-11-19 10:31 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Jean-Christophe PLAGNIOL-VILLARD, Boris BREZILLON,
Alexandre Belloni, Ludovic Desroches, Nicolas Ferre
Remove legacy support for at91sam9rl boards.
This include board files removal plus all legacy code for non DT boards
support.
Use the Device Tree for running this board with newer kernels.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/configs/at91sam9263_defconfig | 151 ---
arch/arm/mach-at91/Kconfig.non_dt | 21 -
arch/arm/mach-at91/Makefile | 4 -
arch/arm/mach-at91/at91sam9263.c | 399 --------
arch/arm/mach-at91/at91sam9263_devices.c | 1538 ------------------------------
arch/arm/mach-at91/board-sam9263ek.c | 493 ----------
6 files changed, 2606 deletions(-)
delete mode 100644 arch/arm/configs/at91sam9263_defconfig
delete mode 100644 arch/arm/mach-at91/at91sam9263_devices.c
delete mode 100644 arch/arm/mach-at91/board-sam9263ek.c
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
deleted file mode 100644
index 8b671c977b81..000000000000
--- a/arch/arm/configs/at91sam9263_defconfig
+++ /dev/null
@@ -1,151 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_AT91SAM9263EK=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_MACB=y
-CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_POLLDEV=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_ATMEL_AC97C=y
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ATMEL_USBA=y
-CONFIG_USB_G_SERIAL=y
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_USER=y
-CONFIG_XZ_DEC=y
-CONFIG_FONTS=y
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 22963a829e5c..a9458234ab23 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -27,12 +27,6 @@ config ARCH_AT91SAM9261
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
-config ARCH_AT91SAM9263
- bool "AT91SAM9263"
- select SOC_AT91SAM9263
- select AT91_USE_OLD_CLK
- select OLD_IRQ_AT91
-
endchoice
config ARCH_AT91SAM9G20
@@ -260,21 +254,6 @@ endif
# ----------------------------------------------------------
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-endif
-
-# ----------------------------------------------------------
-
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index ae8aa1a898e8..e0361357e018 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
@@ -52,9 +51,6 @@ obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
-# AT91SAM9263 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-
# AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index fbff228cc63e..e7ad14864083 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -10,304 +10,11 @@
*
*/
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <mach/at91sam9263.h>
#include <mach/hardware.h>
-#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioCDE_clk = {
- .name = "pioCDE_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
- .name = "mci0_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
- .name = "mci1_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can_clk = {
- .name = "can_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_CAN,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
- .name = "ac97_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_AC97C,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
- .name = "tcb_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_TCB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_PWMC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
- .name = "dma_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_DMA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twodge_clk = {
- .name = "2dge_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_2DGE,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioCDE_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc0_clk,
- &mmc1_clk,
- &can_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &ac97_clk,
- &tcb_clk,
- &pwm_clk,
- &macb_clk,
- &twodge_clk,
- &udc_clk,
- &isi_clk,
- &lcdc_clk,
- &dma_clk,
- &ohci_clk,
- // irq0 .. irq1
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* One additional fake clock for macb_hclk */
- CLKDEV_CON_ID("hclk", &macb_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
- CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
- CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
- /* fake hclk clock */
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
- CLKDEV_CON_ID("pioA", &pioA_clk),
- CLKDEV_CON_ID("pioB", &pioB_clk),
- CLKDEV_CON_ID("pioC", &pioCDE_clk),
- CLKDEV_CON_ID("pioD", &pioCDE_clk),
- CLKDEV_CON_ID("pioE", &pioCDE_clk),
- /* more usart lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
- /* more tc lookup table for DT entries */
- CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk),
- CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk),
- CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static void __init at91sam9263_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
-}
-#else
-#define at91sam9263_register_clocks NULL
-#endif
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9263_gpio[] __initdata = {
- {
- .id = AT91SAM9263_ID_PIOA,
- .regbase = AT91SAM9263_BASE_PIOA,
- }, {
- .id = AT91SAM9263_ID_PIOB,
- .regbase = AT91SAM9263_BASE_PIOB,
- }, {
- .id = AT91SAM9263_ID_PIOCDE,
- .regbase = AT91SAM9263_BASE_PIOC,
- }, {
- .id = AT91SAM9263_ID_PIOCDE,
- .regbase = AT91SAM9263_BASE_PIOD,
- }, {
- .id = AT91SAM9263_ID_PIOCDE,
- .regbase = AT91SAM9263_BASE_PIOE,
- }
-};
/* --------------------------------------------------------------------
* AT91SAM9263 processor initialization
@@ -319,121 +26,15 @@ static void __init at91sam9263_map_io(void)
at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE);
}
-static void __init at91sam9263_ioremap_registers(void)
-{
- at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512);
- at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512);
- at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
- at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
- at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX);
- at91_pm_set_standby(at91sam9_sdram_standby);
-}
-
static void __init at91sam9263_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0);
at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9263_gpio, 5);
-}
-
-static struct resource rstc_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_RSTC,
- .end = AT91SAM9263_BASE_RSTC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_BASE_SDRAMC0,
- .end = AT91SAM9263_BASE_SDRAMC0 + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rstc_device = {
- .name = "at91-sam9260-reset",
- .resource = rstc_resources,
- .num_resources = ARRAY_SIZE(rstc_resources),
-};
-
-static struct resource shdwc_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SHDWC,
- .end = AT91SAM9263_BASE_SHDWC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device shdwc_device = {
- .name = "at91-poweroff",
- .resource = shdwc_resources,
- .num_resources = ARRAY_SIZE(shdwc_resources),
-};
-
-static void __init at91sam9263_register_devices(void)
-{
- platform_device_register(&rstc_device);
- platform_device_register(&shdwc_device);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A */
- 1, /* Parallel IO Controller B */
- 1, /* Parallel IO Controller C, D and E */
- 0,
- 0,
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 0, /* Multimedia Card Interface 0 */
- 0, /* Multimedia Card Interface 1 */
- 3, /* CAN */
- 6, /* Two-Wire Interface */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 4, /* Serial Synchronous Controller 0 */
- 4, /* Serial Synchronous Controller 1 */
- 5, /* AC97 Controller */
- 0, /* Timer Counter 0, 1 and 2 */
- 0, /* Pulse Width Modulation Controller */
- 3, /* Ethernet */
- 0,
- 0, /* 2D Graphic Engine */
- 2, /* USB Device Port */
- 0, /* Image Sensor Interface */
- 3, /* LDC Controller */
- 0, /* DMA Controller */
- 0,
- 2, /* USB Host port */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
-};
-
-static void __init at91sam9263_init_time(void)
-{
- at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
}
AT91_SOC_START(at91sam9263)
.map_io = at91sam9263_map_io,
- .default_irq_priority = at91sam9263_default_irq_priority,
- .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1),
- .ioremap_registers = at91sam9263_ioremap_registers,
- .register_clocks = at91sam9263_register_clocks,
- .register_devices = at91sam9263_register_devices,
.init = at91sam9263_initialize,
- .init_time = at91sam9263_init_time,
AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
deleted file mode 100644
index cef0e2f57068..000000000000
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ /dev/null
@@ -1,1538 +0,0 @@
-/*
- * arch/arm/mach-at91/at91sam9263_devices.c
- *
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/at91sam9263.h>
-#include <mach/at91sam9263_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91SAM9263_UHP_BASE,
- .end = AT91SAM9263_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- /* Enable VBus control for UHP ports */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->vbus_pin[i]))
- at91_set_gpio_output(data->vbus_pin[i],
- data->vbus_pin_active_low[i]);
- }
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->overcurrent_pin[i]))
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_data = *data;
- platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_UDP,
- .end = AT91SAM9263_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- udc_data = *data;
- platform_device_register(&at91_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_EMAC,
- .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->phy_irq_pin)) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
- at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
-
- if (!data->is_rmii) {
- at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
- }
-
- eth_data = *data;
- platform_device_register(&at91sam9263_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_MCI0,
- .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_mmc0_device = {
- .name = "atmel_mci",
- .id = 0,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc0_data,
- },
- .resource = mmc0_resources,
- .num_resources = ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_MCI1,
- .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_mmc1_device = {
- .name = "atmel_mci",
- .id = 1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc1_data,
- },
- .resource = mmc1_resources,
- .num_resources = ARRAY_SIZE(mmc1_resources),
-};
-
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
- unsigned int i;
- unsigned int slot_count = 0;
-
- if (!data)
- return;
-
- for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
-
- if (!data->slot[i].bus_width)
- continue;
-
- /* input/irq */
- if (gpio_is_valid(data->slot[i].detect_pin)) {
- at91_set_gpio_input(data->slot[i].detect_pin,
- 1);
- at91_set_deglitch(data->slot[i].detect_pin,
- 1);
- }
- if (gpio_is_valid(data->slot[i].wp_pin))
- at91_set_gpio_input(data->slot[i].wp_pin, 1);
-
- if (mmc_id == 0) { /* MCI0 */
- switch (i) {
- case 0: /* slot A */
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
- }
- slot_count++;
- break;
- case 1: /* slot B */
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA16, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA17, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA18, 1);
- at91_set_A_periph(AT91_PIN_PA19, 1);
- at91_set_A_periph(AT91_PIN_PA20, 1);
- }
- slot_count++;
- break;
- default:
- printk(KERN_ERR
- "AT91: SD/MMC slot %d not available\n", i);
- break;
- }
- if (slot_count) {
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA12, 0);
-
- mmc0_data = *data;
- platform_device_register(&at91sam9263_mmc0_device);
- }
- } else if (mmc_id == 1) { /* MCI1 */
- switch (i) {
- case 0: /* slot A */
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA8, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
- }
- slot_count++;
- break;
- case 1: /* slot B */
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA21, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA22, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA23, 1);
- at91_set_A_periph(AT91_PIN_PA24, 1);
- at91_set_A_periph(AT91_PIN_PA25, 1);
- }
- slot_count++;
- break;
- default:
- printk(KERN_ERR
- "AT91: SD/MMC slot %d not available\n", i);
- break;
- }
- if (slot_count) {
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA6, 0);
-
- mmc1_data = *data;
- platform_device_register(&at91sam9263_mmc1_device);
- }
- }
- }
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * Compact Flash (PCMCIA or IDE)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
- defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-
-static struct at91_cf_data cf0_data;
-
-static struct resource cf0_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_4,
- .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
- }
-};
-
-static struct platform_device cf0_device = {
- .id = 0,
- .dev = {
- .platform_data = &cf0_data,
- },
- .resource = cf0_resources,
- .num_resources = ARRAY_SIZE(cf0_resources),
-};
-
-static struct at91_cf_data cf1_data;
-
-static struct resource cf1_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_5,
- .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
- }
-};
-
-static struct platform_device cf1_device = {
- .id = 1,
- .dev = {
- .platform_data = &cf1_data,
- },
- .resource = cf1_resources,
- .num_resources = ARRAY_SIZE(cf1_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
- unsigned long ebi0_csa;
- struct platform_device *pdev;
-
- if (!data)
- return;
-
- /*
- * assign CS4 or CS5 to SMC with Compact Flash logic support,
- * we assume SMC timings are configured by board code,
- * except True IDE where timings are controlled by driver
- */
- ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
- switch (data->chipselect) {
- case 4:
- at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */
- ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
- cf0_data = *data;
- pdev = &cf0_device;
- break;
- case 5:
- at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */
- ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
- cf1_data = *data;
- pdev = &cf1_device;
- break;
- default:
- printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
- data->chipselect);
- return;
- }
- at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
-
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
-
- if (gpio_is_valid(data->irq_pin)) {
- at91_set_gpio_input(data->irq_pin, 1);
- at91_set_deglitch(data->irq_pin, 1);
- }
-
- if (gpio_is_valid(data->vcc_pin))
- /* initially off */
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* enable EBI controlled pins */
- at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */
- at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */
- at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
- at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
-
- pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
- platform_device_register(pdev);
-}
-#else
-void __init at91_add_device_cf(struct at91_cf_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_BASE_ECC0,
- .end = AT91SAM9263_BASE_ECC0 + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9263_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
- at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- nand_data = *data;
- platform_device_register(&at91sam9263_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PB4,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PB5,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9263_twi_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9263_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_TWI,
- .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_twi_device = {
- .name = "i2c-at91sam9260",
- .id = 0,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9263_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SPI0,
- .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SPI1,
- .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (!gpio_is_valid(cs_pin))
- continue;
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- platform_device_register(&at91sam9263_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91sam9263_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_AC97C,
- .end = AT91SAM9263_BASE_AC97C + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_ac97_device = {
- .name = "atmel_ac97c",
- .id = 0,
- .dev = {
- .dma_mask = &ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ac97_data,
- },
- .resource = ac97_resources,
- .num_resources = ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
- if (!data)
- return;
-
- at91_set_A_periph(AT91_PIN_PB0, 0); /* AC97FS */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* AC97CK */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* AC97TX */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */
-
- /* reset */
- if (gpio_is_valid(data->reset_pin))
- at91_set_gpio_output(data->reset_pin, 0);
-
- ac97_data = *data;
- platform_device_register(&at91sam9263_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * CAN Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
-static struct resource can_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_CAN,
- .end = AT91SAM9263_BASE_CAN + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_can_device = {
- .name = "at91_can",
- .id = -1,
- .resource = can_resources,
- .num_resources = ARRAY_SIZE(can_resources),
-};
-
-void __init at91_add_device_can(struct at91_can_data *data)
-{
- at91_set_A_periph(AT91_PIN_PA13, 0); /* CANTX */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* CANRX */
- at91sam9263_can_device.dev.platform_data = data;
-
- platform_device_register(&at91sam9263_can_device);
-}
-#else
-void __init at91_add_device_can(struct at91_can_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_pdata lcdc_data;
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .start = AT91SAM9263_LCDC_BASE,
- .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_lcdc_device = {
- .name = "at91sam9263-lcdfb",
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
-{
- if (!data)
- return;
-
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Image Sensor Interface
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-
-struct resource isi_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_ISI,
- .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_isi_device = {
- .name = "at91_isi",
- .id = -1,
- .resource = isi_resources,
- .num_resources = ARRAY_SIZE(isi_resources),
-};
-
-void __init at91_add_device_isi(struct isi_platform_data *data,
- bool use_pck_as_mck)
-{
- at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
- at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
- at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
- at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
- at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
- at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
- at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
- at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
- at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
- at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
- at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
- at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
- at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
- at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
- at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
-
- if (use_pck_as_mck) {
- at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
-
- /* TODO: register the PCK for ISI_MCK and set its parent */
- }
-}
-#else
-void __init at91_add_device_isi(struct isi_platform_data *data,
- bool use_pck_as_mck) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_TCB0,
- .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_tcb_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb_resources,
- .num_resources = ARRAY_SIZE(tcb_resources),
-};
-
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
- { .compatible = "atmel,at91rm9200-tcb" },
- { /*sentinel*/ }
-};
-#endif
-
-static void __init at91_add_device_tc(void)
-{
-#if defined(CONFIG_OF)
- struct device_node *np;
-
- np = of_find_matching_node(NULL, tcb_ids);
- if (np) {
- of_node_put(np);
- return;
- }
-#endif
-
- platform_device_register(&at91sam9263_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt0_resources[] = {
- {
- .start = AT91SAM9263_BASE_RTT0,
- .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9263_rtt0_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt0_resources,
-};
-
-static struct resource rtt1_resources[] = {
- {
- .start = AT91SAM9263_BASE_RTT1,
- .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9263_rtt1_device = {
- .name = "at91_rtt",
- .id = 1,
- .resource = rtt1_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
- struct platform_device *pdev;
- struct resource *r;
-
- switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
- case 0:
- /*
- * The second resource is needed only for the chosen RTT:
- * GPBR will serve as the storage for RTC time offset
- */
- at91sam9263_rtt0_device.num_resources = 3;
- at91sam9263_rtt1_device.num_resources = 1;
- pdev = &at91sam9263_rtt0_device;
- r = rtt0_resources;
- break;
- case 1:
- at91sam9263_rtt0_device.num_resources = 1;
- at91sam9263_rtt1_device.num_resources = 3;
- pdev = &at91sam9263_rtt1_device;
- r = rtt1_resources;
- break;
- default:
- pr_err("at91sam9263: only supports 2 RTT (%d)\n",
- CONFIG_RTC_DRV_AT91SAM9_RTT);
- return;
- }
-
- pdev->name = "rtc-at91sam9";
- r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
- r[1].end = r[1].start + 3;
- r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
- r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
- /* Only one resource is needed: RTT not used as RTC */
- at91sam9263_rtt0_device.num_resources = 1;
- at91sam9263_rtt1_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
- at91_add_device_rtt_rtc();
- platform_device_register(&at91sam9263_rtt0_device);
- platform_device_register(&at91sam9263_rtt1_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91SAM9263_BASE_WDT,
- .end = AT91SAM9263_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9263_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91sam9263_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * PWM
- * --------------------------------------------------------------------*/
-
-#if IS_ENABLED(CONFIG_PWM_ATMEL)
-static struct resource pwm_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_PWMC,
- .end = AT91SAM9263_BASE_PWMC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_pwm0_device = {
- .name = "at91sam9rl-pwm",
- .id = -1,
- .resource = pwm_resources,
- .num_resources = ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
- if (mask & (1 << AT91_PWM0))
- at91_set_B_periph(AT91_PIN_PB7, 1); /* enable PWM0 */
-
- if (mask & (1 << AT91_PWM1))
- at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */
-
- if (mask & (1 << AT91_PWM2))
- at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */
-
- if (mask & (1 << AT91_PWM3))
- at91_set_B_periph(AT91_PIN_PB29, 1); /* enable PWM3 */
-
- platform_device_register(&at91sam9263_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SSC0,
- .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_ssc0_device = {
- .name = "at91rm9200_ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc0_resources,
- .num_resources = ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_B_periph(AT91_PIN_PB0, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_B_periph(AT91_PIN_PB1, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_B_periph(AT91_PIN_PB2, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_B_periph(AT91_PIN_PB3, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_B_periph(AT91_PIN_PB4, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_B_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SSC1,
- .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_ssc1_device = {
- .name = "at91rm9200_ssc",
- .id = 1,
- .dev = {
- .dma_mask = &ssc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc1_resources,
- .num_resources = ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB6, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB7, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB8, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB9, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB10, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91SAM9263_ID_SSC0:
- pdev = &at91sam9263_ssc0_device;
- configure_ssc0_pins(pins);
- break;
- case AT91SAM9263_ID_SSC1:
- pdev = &at91sam9263_ssc1_device;
- configure_ssc1_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_DBGU,
- .end = AT91SAM9263_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US0,
- .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US1,
- .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US2,
- .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9263_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91SAM9263_ID_US0:
- pdev = &at91sam9263_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91SAM9263_ID_US1:
- pdev = &at91sam9263_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91SAM9263_ID_US2:
- pdev = &at91sam9263_uart2_device;
- configure_usart2_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- if (of_have_populated_dt())
- return 0;
-
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
deleted file mode 100644
index d76680f2a209..000000000000
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ /dev/null
@@ -1,493 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-sam9263ek.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/platform_data/at24.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 16.367 MHz crystal */
- at91_initialize(16367660);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
- .vbus_pin_active_low = {1, 1},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PA25,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
- .x_plate_ohms = 450,
- .y_plate_ohms = 250,
- .pressure_max = 15000,
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
-
-static void __init ek_add_device_ts(void)
-{
- at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */
- at91_set_gpio_input(AT91_PIN_PA31, 1); /* Touchscreen BUSY signal */
-}
-#else
-static void __init ek_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- {
- .modalias = "ads7846",
- .chip_select = 3,
- .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
- },
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata mci1_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PE18,
- .wp_pin = AT91_PIN_PE19,
- },
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PE31,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_64M,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PA22,
- .enable_pin = AT91_PIN_PD15,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c512 = {
- .byte_len = SZ_512K / 8,
- .page_size = 128,
- .flags = AT24_FLAG_ADDR16,
-};
-
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c512", 0x50),
- .platform_data = &at24c512,
- },
- /* more devices can be added using expansion connectors */
-};
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TX09D50VM1CCA @ 60",
- .refresh = 60,
- .xres = 240, .yres = 320,
- .pixclock = KHZ2PICOS(4965),
-
- .left_margin = 1, .right_margin = 33,
- .upper_margin = 1, .lower_margin = 0,
- .hsync_len = 5, .vsync_len = 1,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX09D70VM1CCA",
-
- .modedb = at91_tft_vga_modes,
- .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
- .hfmin = 15000,
- .hfmax = 64000,
- .vfmin = 50,
- .vfmax = 150,
-};
-
-#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
-{
- at91_set_gpio_value(AT91_PIN_PA30, on);
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
- .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
- .guard_time = 1,
-};
-
-#else
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* BP1, "leftclic" */
- .code = BTN_LEFT,
- .gpio = AT91_PIN_PC5,
- .active_low = 1,
- .desc = "left_click",
- .wakeup = 1,
- },
- { /* BP2, "rightclic" */
- .code = BTN_RIGHT,
- .gpio = AT91_PIN_PC4,
- .active_low = 1,
- .desc = "right_click",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PC5, 1); /* left button */
- at91_set_deglitch(AT91_PIN_PC5, 1);
- at91_set_GPIO_periph(AT91_PIN_PC4, 1); /* right button */
- at91_set_deglitch(AT91_PIN_PC4, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- * reset_pin is not connected: NRST
- */
-static struct ac97c_platform_data ek_ac97_data = {
- .reset_pin = -EINVAL,
-};
-
-
-/*
- * LEDs ... these could all be PWM-driven, for variable brightness
- */
-static struct gpio_led ek_leds[] = {
- { /* "right" led, green, userled2 (could be driven by pwm2) */
- .name = "ds2",
- .gpio = AT91_PIN_PC29,
- .active_low = 1,
- .default_trigger = "nand-disk",
- },
- { /* "power" led, yellow (could be driven by pwm0) */
- .name = "ds3",
- .gpio = AT91_PIN_PB7,
- .default_trigger = "heartbeat",
- },
-#if !IS_ENABLED(CONFIG_LEDS_PWM)
- {
- .name = "ds1",
- .gpio = AT91_PIN_PB8,
- .active_low = 1,
- .default_trigger = "none",
- }
-#endif
-};
-
-/*
- * PWM Leds
- */
-static struct pwm_lookup pwm_lookup[] = {
- PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "ds1",
- 5000, PWM_POLARITY_INVERSED),
-};
-
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-static struct led_pwm pwm_leds[] = {
- {
- .name = "ds1",
- .max_brightness = 255,
- },
-};
-
-static struct led_pwm_platform_data pwm_data = {
- .num_leds = ARRAY_SIZE(pwm_leds),
- .leds = pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
- .name = "leds_pwm",
- .id = -1,
- .dev = {
- .platform_data = &pwm_data,
- },
-};
-#endif
-
-
-/*
- * CAN
- */
-static void sam9263ek_transceiver_switch(int on)
-{
- if (on) {
- at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */
- at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */
- } else {
- at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */
- at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */
- }
-}
-
-static struct at91_can_data ek_can_data = {
- .transceiver_switch = sam9263ek_transceiver_switch,
-};
-
-static struct platform_device *devices[] __initdata = {
-#if IS_ENABLED(CONFIG_LEDS_PWM)
- &leds_pwm,
-#endif
-};
-
-static void __init ek_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* Touchscreen */
- ek_add_device_ts();
- /* MMC */
- at91_add_device_mci(1, &mci1_data);
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* LCD Controller */
- at91_add_device_lcdc(&ek_lcdc_data);
- /* Push Buttons */
- ek_add_device_buttons();
- /* AC97 */
- at91_add_device_ac97(&ek_ac97_data);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-#if IS_ENABLED(CONFIG_LEDS_PWM)
- at91_add_device_pwm(1 << AT91_PWM1);
-#endif
- /* CAN */
- at91_add_device_can(&ek_can_data);
- /* Other platform devices */
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
--
2.1.3
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files
2014-11-19 10:31 [PATCH 0/4] ARM: at91: remove !DT support for at91sam9260/9g20 and at91sam9263 Nicolas Ferre
2014-11-19 10:31 ` [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support Nicolas Ferre
@ 2014-11-19 10:31 ` Nicolas Ferre
2014-11-19 10:31 ` [PATCH 3/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy board support Nicolas Ferre
2014-11-19 10:31 ` [PATCH 4/4] ARM: at91/Kconfig: remove unused config options Nicolas Ferre
3 siblings, 0 replies; 13+ messages in thread
From: Nicolas Ferre @ 2014-11-19 10:31 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Jean-Christophe PLAGNIOL-VILLARD, Boris BREZILLON,
Alexandre Belloni, Ludovic Desroches, Nicolas Ferre
Remove old board files that use at91sam9260 or at91sam9g20 Atmel SoCs. The
device tree is mature on these SoCs. It must be used now.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/mach-at91/Makefile | 19 --
arch/arm/mach-at91/board-afeb-9260v1.c | 223 ------------
arch/arm/mach-at91/board-cam60.c | 199 -----------
arch/arm/mach-at91/board-cpu9krea.c | 386 ---------------------
arch/arm/mach-at91/board-flexibity.c | 171 ----------
arch/arm/mach-at91/board-gsia18s.c | 585 --------------------------------
arch/arm/mach-at91/board-pcontrol-g20.c | 228 -------------
arch/arm/mach-at91/board-sam9-l9260.c | 230 -------------
arch/arm/mach-at91/board-sam9260ek.c | 354 -------------------
arch/arm/mach-at91/board-sam9g20ek.c | 429 -----------------------
arch/arm/mach-at91/board-snapper9260.c | 191 -----------
arch/arm/mach-at91/board-stamp9g20.c | 294 ----------------
arch/arm/mach-at91/stamp9g20.h | 7 -
13 files changed, 3316 deletions(-)
delete mode 100644 arch/arm/mach-at91/board-afeb-9260v1.c
delete mode 100644 arch/arm/mach-at91/board-cam60.c
delete mode 100644 arch/arm/mach-at91/board-cpu9krea.c
delete mode 100644 arch/arm/mach-at91/board-flexibity.c
delete mode 100644 arch/arm/mach-at91/board-gsia18s.c
delete mode 100644 arch/arm/mach-at91/board-pcontrol-g20.c
delete mode 100644 arch/arm/mach-at91/board-sam9-l9260.c
delete mode 100644 arch/arm/mach-at91/board-sam9260ek.c
delete mode 100644 arch/arm/mach-at91/board-sam9g20ek.c
delete mode 100644 arch/arm/mach-at91/board-snapper9260.c
delete mode 100644 arch/arm/mach-at91/board-stamp9g20.c
delete mode 100644 arch/arm/mach-at91/stamp9g20.h
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index e0361357e018..88d49248fc5c 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -39,29 +39,10 @@ obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
obj-$(CONFIG_MACH_ECO920) += board-eco920.o
-# AT91SAM9260 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-obj-$(CONFIG_MACH_CAM60) += board-cam60.o
-obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
-obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
-obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
-obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o
-
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
-# AT91SAM9G20 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
-obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
-obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
-obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
-obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
-
-# AT91SAM9260/AT91SAM9G20 board-specific support
-obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
-
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
deleted file mode 100644
index e76e35ce81e7..000000000000
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-afeb-9260v1.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2008 Sergey Lapin
- *
- * A custom board designed as open hardware; PCBs and various information
- * is available at http://groups.google.com/group/arm9fpga-evolution-board/
- * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init afeb9260_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata afeb9260_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata afeb9260_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info afeb9260_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata afeb9260_macb_data = {
- .phy_irq_pin = AT91_PIN_PA9,
- .is_rmii = 0,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata afeb9260_nand_partition[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = (640 * SZ_1K),
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_2M,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata afeb9260_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .bus_width_16 = 0,
- .ecc_mode = NAND_ECC_SOFT,
- .parts = afeb9260_nand_partition,
- .num_parts = ARRAY_SIZE(afeb9260_nand_partition),
- .det_pin = -EINVAL,
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata afeb9260_mci0_data = {
- .slot[1] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC9,
- .wp_pin = AT91_PIN_PC4,
- },
-};
-
-
-
-static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- }, {
- I2C_BOARD_INFO("fm3130", 0x68),
- }, {
- I2C_BOARD_INFO("24c64", 0x50),
- },
-};
-
-/*
- * IDE (CF True IDE mode)
- */
-static struct at91_cf_data afeb9260_cf_data = {
- .chipselect = 4,
- .irq_pin = AT91_PIN_PA6,
- .det_pin = -EINVAL,
- .vcc_pin = -EINVAL,
- .rst_pin = AT91_PIN_PA7,
- .flags = AT91_CF_TRUE_IDE,
-};
-
-static void __init afeb9260_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&afeb9260_usbh_data);
- /* USB Device */
- at91_add_device_udc(&afeb9260_udc_data);
- /* SPI */
- at91_add_device_spi(afeb9260_spi_devices,
- ARRAY_SIZE(afeb9260_spi_devices));
- /* NAND */
- at91_add_device_nand(&afeb9260_nand_data);
- /* Ethernet */
- at91_add_device_eth(&afeb9260_macb_data);
-
- /* Standard function's pin assignments are not
- * appropriate for us and generic code provide
- * no API to configure these pins any other way */
- at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
- /* MMC */
- at91_add_device_mci(0, &afeb9260_mci0_data);
- /* I2C */
- at91_add_device_i2c(afeb9260_i2c_devices,
- ARRAY_SIZE(afeb9260_i2c_devices));
- /* Audio */
- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
- /* IDE */
- at91_add_device_cf(&afeb9260_cf_data);
-}
-
-MACHINE_START(AFEB9260, "Custom afeb9260 board")
- /* Maintainer: Sergey Lapin <slapin@ossfans.org> */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = afeb9260_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = afeb9260_board_init,
-MACHINE_END
-
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
deleted file mode 100644
index ae827dd2d0d2..000000000000
--- a/arch/arm/mach-at91/board-cam60.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * KwikByte CAM60 (KB9260)
- *
- * based on board-sam9260ek.c
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init cam60_init_early(void)
-{
- /* Initialize processor: 10 MHz crystal */
- at91_initialize(10000000);
-}
-
-/*
- * USB Host
- */
-static struct at91_usbh_data __initdata cam60_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * SPI devices.
- */
-#if defined(CONFIG_MTD_DATAFLASH)
-static struct mtd_partition cam60_spi_partitions[] = {
- {
- .name = "BOOT1",
- .offset = 0,
- .size = 4 * 1056,
- },
- {
- .name = "BOOT2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 256 * 1056,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 2222 * 1056,
- },
- {
- .name = "file system",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct flash_platform_data cam60_spi_flash_platform_data = {
- .name = "spi_flash",
- .parts = cam60_spi_partitions,
- .nr_parts = ARRAY_SIZE(cam60_spi_partitions)
-};
-#endif
-
-static struct spi_board_info cam60_spi_devices[] __initdata = {
-#if defined(CONFIG_MTD_DATAFLASH)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- .platform_data = &cam60_spi_flash_platform_data
- },
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data cam60_macb_data __initdata = {
- .phy_irq_pin = AT91_PIN_PB5,
- .is_rmii = 0,
-};
-
-
-/*
- * NAND Flash
- */
-static struct mtd_partition __initdata cam60_nand_partition[] = {
- {
- .name = "nand_fs",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata cam60_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PA9,
- .enable_pin = AT91_PIN_PA7,
- .ecc_mode = NAND_ECC_SOFT,
- .parts = cam60_nand_partition,
- .num_parts = ARRAY_SIZE(cam60_nand_partition),
-};
-
-static struct sam9_smc_config __initdata cam60_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init cam60_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &cam60_nand_smc_config);
-
- at91_add_device_nand(&cam60_nand_data);
-}
-
-
-static void __init cam60_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* SPI */
- at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
- /* Ethernet */
- at91_add_device_eth(&cam60_macb_data);
- /* USB Host */
- /* enable USB power supply circuit */
- at91_set_gpio_output(AT91_PIN_PB18, 1);
- at91_add_device_usbh(&cam60_usbh_data);
- /* NAND */
- cam60_add_device_nand();
-}
-
-MACHINE_START(CAM60, "KwikByte CAM60")
- /* Maintainer: KwikByte */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = cam60_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = cam60_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
deleted file mode 100644
index 731c8318f4f5..000000000000
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cpu9krea.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260_matrix.h>
-#include <mach/at91_matrix.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init cpu9krea_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata cpu9krea_udc_data = {
- .vbus_pin = AT91_PIN_PC8,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata cpu9krea_macb_data = {
- .phy_irq_pin = -EINVAL,
- .is_rmii = 1,
-};
-
-/*
- * NAND flash
- */
-static struct atmel_nand_data __initdata cpu9krea_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .bus_width_16 = 0,
- .det_pin = -EINVAL,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-#ifdef CONFIG_MACH_CPU9260
-static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-#else
-static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 3,
-};
-#endif
-
-static void __init cpu9krea_add_device_nand(void)
-{
- sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config);
- at91_add_device_nand(&cpu9krea_nand_data);
-}
-
-/*
- * NOR flash
- */
-static struct physmap_flash_data cpuat9260_nor_data = {
- .width = 2,
-};
-
-#define NOR_BASE AT91_CHIPSELECT_0
-#define NOR_SIZE SZ_64M
-
-static struct resource nor_flash_resources[] = {
- {
- .start = NOR_BASE,
- .end = NOR_BASE + NOR_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device cpu9krea_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &cpuat9260_nor_data,
- },
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
-};
-
-#ifdef CONFIG_MACH_CPU9260
-static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 10,
- .nrd_pulse = 10,
- .ncs_write_pulse = 6,
- .nwe_pulse = 6,
-
- .read_cycle = 12,
- .write_cycle = 8,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
- | AT91_SMC_DBW_16,
- .tdf_cycles = 2,
-};
-#else
-static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 13,
- .nrd_pulse = 13,
- .ncs_write_pulse = 8,
- .nwe_pulse = 8,
-
- .read_cycle = 15,
- .write_cycle = 10,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
- | AT91_SMC_DBW_16,
- .tdf_cycles = 2,
-};
-#endif
-
-static __init void cpu9krea_add_device_nor(void)
-{
- unsigned long csa;
-
- csa = at91_matrix_read(AT91_MATRIX_EBICSA);
- at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
-
- /* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);
-
- platform_device_register(&cpu9krea_nor_flash);
-}
-
-/*
- * LEDs
- */
-static struct gpio_led cpu9krea_leds[] = {
- { /* LED1 */
- .name = "LED1",
- .gpio = AT91_PIN_PC11,
- .active_low = 1,
- .default_trigger = "timer",
- },
- { /* LED2 */
- .name = "LED2",
- .gpio = AT91_PIN_PC12,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* LED3 */
- .name = "LED3",
- .gpio = AT91_PIN_PC7,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* LED4 */
- .name = "LED4",
- .gpio = AT91_PIN_PC9,
- .active_low = 1,
- .default_trigger = "none",
- }
-};
-
-static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ds1339", 0x68),
- },
-};
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button cpu9krea_buttons[] = {
- {
- .gpio = AT91_PIN_PC3,
- .code = BTN_0,
- .desc = "BP1",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB20,
- .code = BTN_1,
- .desc = "BP2",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data cpu9krea_button_data = {
- .buttons = cpu9krea_buttons,
- .nbuttons = ARRAY_SIZE(cpu9krea_buttons),
-};
-
-static struct platform_device cpu9krea_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &cpu9krea_button_data,
- }
-};
-
-static void __init cpu9krea_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */
- at91_set_deglitch(AT91_PIN_PC3, 1);
- at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */
- at91_set_deglitch(AT91_PIN_PB20, 1);
-
- platform_device_register(&cpu9krea_button_device);
-}
-#else
-static void __init cpu9krea_add_device_buttons(void)
-{
-}
-#endif
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata cpu9krea_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PA29,
- .wp_pin = -EINVAL,
- },
-};
-
-static void __init cpu9krea_board_init(void)
-{
- at91_register_devices();
-
- /* NOR */
- cpu9krea_add_device_nor();
- /* Serial */
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART3 on ttyS4. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
-
- /* USART4 on ttyS5. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&cpu9krea_usbh_data);
- /* USB Device */
- at91_add_device_udc(&cpu9krea_udc_data);
- /* NAND */
- cpu9krea_add_device_nand();
- /* Ethernet */
- at91_add_device_eth(&cpu9krea_macb_data);
- /* MMC */
- at91_add_device_mci(0, &cpu9krea_mci0_data);
- /* I2C */
- at91_add_device_i2c(cpu9krea_i2c_devices,
- ARRAY_SIZE(cpu9krea_i2c_devices));
- /* LEDs */
- at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
- /* Push Buttons */
- cpu9krea_add_device_buttons();
-}
-
-#ifdef CONFIG_MACH_CPU9260
-MACHINE_START(CPUAT9260, "Eukrea CPU9260")
-#else
-MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
-#endif
- /* Maintainer: Eric Benard - EUKREA Electromatique */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = cpu9krea_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = cpu9krea_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
deleted file mode 100644
index a6aa4a2432f2..000000000000
--- a/arch/arm/mach-at91/board-flexibity.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-flexibity.c
- *
- * Copyright (C) 2010-2011 Flexibity
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init flexibity_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/* USB Host port */
-static struct at91_usbh_data __initdata flexibity_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/* USB Device port */
-static struct at91_udc_data __initdata flexibity_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-/* I2C devices */
-static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ds1307", 0x68),
- },
-};
-
-/* SPI devices */
-static struct spi_board_info flexibity_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-};
-
-/* MCI (SD/MMC) */
-static struct mci_platform_data __initdata flexibity_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC9,
- .wp_pin = AT91_PIN_PC4,
- },
-};
-
-/* LEDs */
-static struct gpio_led flexibity_leds[] = {
- {
- .name = "usb1:green",
- .gpio = AT91_PIN_PA12,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb1:red",
- .gpio = AT91_PIN_PA13,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb2:green",
- .gpio = AT91_PIN_PB26,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb2:red",
- .gpio = AT91_PIN_PB27,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb3:green",
- .gpio = AT91_PIN_PC8,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb3:red",
- .gpio = AT91_PIN_PC6,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb4:green",
- .gpio = AT91_PIN_PB4,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb4:red",
- .gpio = AT91_PIN_PB5,
- .active_low = 1,
- .default_trigger = "default-on",
- }
-};
-
-static void __init flexibity_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&flexibity_usbh_data);
- /* USB Device */
- at91_add_device_udc(&flexibity_udc_data);
- /* I2C */
- at91_add_device_i2c(flexibity_i2c_devices,
- ARRAY_SIZE(flexibity_i2c_devices));
- /* SPI */
- at91_add_device_spi(flexibity_spi_devices,
- ARRAY_SIZE(flexibity_spi_devices));
- /* MMC */
- at91_add_device_mci(0, &flexibity_mci0_data);
- /* LEDs */
- at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
-}
-
-MACHINE_START(FLEXIBITY, "Flexibity Connect")
- /* Maintainer: Maxim Osipov */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = flexibity_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = flexibity_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
deleted file mode 100644
index bf5cc55c7db6..000000000000
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ /dev/null
@@ -1,585 +0,0 @@
-/*
- * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- * taskit GmbH
- * 2010 Igor Plyatov <plyatov@gmail.com>
- * GeoSIG Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gsia18s.h"
-#include "stamp9g20.h"
-#include "gpio.h"
-
-static void __init gsia18s_init_early(void)
-{
- stamp9g20_init_early();
-}
-
-/*
- * Two USB Host ports
- */
-static struct at91_usbh_data __initdata usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata udc_data = {
- .vbus_pin = AT91_PIN_PA22,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
- .phy_irq_pin = AT91_PIN_PA28,
- .is_rmii = 1,
-};
-
-/*
- * LEDs and GPOs
- */
-static struct gpio_led gpio_leds[] = {
- {
- .name = "gpo:spi1reset",
- .gpio = AT91_PIN_PC1,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "gpo:trig_net_out",
- .gpio = AT91_PIN_PB20,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "gpo:trig_net_dir",
- .gpio = AT91_PIN_PB19,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "gpo:charge_dis",
- .gpio = AT91_PIN_PC2,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "led:event",
- .gpio = AT91_PIN_PB17,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "led:lan",
- .gpio = AT91_PIN_PB18,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "led:error",
- .gpio = AT91_PIN_PB16,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds = {
- .name = "leds-gpio",
- .id = 0,
- .dev = {
- .platform_data = &gpio_led_info,
- }
-};
-
-static void __init gsia18s_leds_init(void)
-{
- platform_device_register(&leds);
-}
-
-/* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */
-static struct gpio_led pcf_gpio_leds1[] = {
- { /* bit 0 */
- .name = "gpo:hdc_power",
- .gpio = PCF_GPIO_HDC_POWER,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 1 */
- .name = "gpo:wifi_setup",
- .gpio = PCF_GPIO_WIFI_SETUP,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 2 */
- .name = "gpo:wifi_enable",
- .gpio = PCF_GPIO_WIFI_ENABLE,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 3 */
- .name = "gpo:wifi_reset",
- .gpio = PCF_GPIO_WIFI_RESET,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- /* bit 4 used as GPI */
- { /* bit 5 */
- .name = "gpo:gps_setup",
- .gpio = PCF_GPIO_GPS_SETUP,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 6 */
- .name = "gpo:gps_standby",
- .gpio = PCF_GPIO_GPS_STANDBY,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- { /* bit 7 */
- .name = "gpo:gps_power",
- .gpio = PCF_GPIO_GPS_POWER,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }
-};
-
-static struct gpio_led_platform_data pcf_gpio_led_info1 = {
- .leds = pcf_gpio_leds1,
- .num_leds = ARRAY_SIZE(pcf_gpio_leds1),
-};
-
-static struct platform_device pcf_leds1 = {
- .name = "leds-gpio", /* GS_IA18-CB_board */
- .id = 1,
- .dev = {
- .platform_data = &pcf_gpio_led_info1,
- }
-};
-
-/* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
-static struct gpio_led pcf_gpio_leds2[] = {
- { /* bit 0 */
- .name = "gpo:alarm_1",
- .gpio = PCF_GPIO_ALARM1,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 1 */
- .name = "gpo:alarm_2",
- .gpio = PCF_GPIO_ALARM2,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 2 */
- .name = "gpo:alarm_3",
- .gpio = PCF_GPIO_ALARM3,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 3 */
- .name = "gpo:alarm_4",
- .gpio = PCF_GPIO_ALARM4,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- /* bits 4, 5, 6 not used */
- { /* bit 7 */
- .name = "gpo:alarm_v_relay_on",
- .gpio = PCF_GPIO_ALARM_V_RELAY_ON,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
-};
-
-static struct gpio_led_platform_data pcf_gpio_led_info2 = {
- .leds = pcf_gpio_leds2,
- .num_leds = ARRAY_SIZE(pcf_gpio_leds2),
-};
-
-static struct platform_device pcf_leds2 = {
- .name = "leds-gpio",
- .id = 2,
- .dev = {
- .platform_data = &pcf_gpio_led_info2,
- }
-};
-
-/* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */
-static struct gpio_led pcf_gpio_leds3[] = {
- { /* bit 0 */
- .name = "gpo:modem_power",
- .gpio = PCF_GPIO_MODEM_POWER,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- /* bits 1 and 2 not used */
- { /* bit 3 */
- .name = "gpo:modem_reset",
- .gpio = PCF_GPIO_MODEM_RESET,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- /* bits 4, 5 and 6 not used */
- { /* bit 7 */
- .name = "gpo:trx_reset",
- .gpio = PCF_GPIO_TRX_RESET,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }
-};
-
-static struct gpio_led_platform_data pcf_gpio_led_info3 = {
- .leds = pcf_gpio_leds3,
- .num_leds = ARRAY_SIZE(pcf_gpio_leds3),
-};
-
-static struct platform_device pcf_leds3 = {
- .name = "leds-gpio",
- .id = 3,
- .dev = {
- .platform_data = &pcf_gpio_led_info3,
- }
-};
-
-static void __init gsia18s_pcf_leds_init(void)
-{
- platform_device_register(&pcf_leds1);
- platform_device_register(&pcf_leds2);
- platform_device_register(&pcf_leds3);
-}
-
-/*
- * SPI busses.
- */
-static struct spi_board_info gsia18s_spi_devices[] = {
- { /* User accessible spi0, cs0 used for communication with MSP RTC */
- .modalias = "spidev",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 580000,
- .mode = SPI_MODE_1,
- },
- { /* User accessible spi1, cs0 used for communication with int. DSP */
- .modalias = "spidev",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 5600000,
- .mode = SPI_MODE_0,
- },
- { /* User accessible spi1, cs1 used for communication with ext. DSP */
- .modalias = "spidev",
- .bus_num = 1,
- .chip_select = 1,
- .max_speed_hz = 5600000,
- .mode = SPI_MODE_0,
- },
- { /* User accessible spi1, cs2 used for communication with ext. DSP */
- .modalias = "spidev",
- .bus_num = 1,
- .chip_select = 2,
- .max_speed_hz = 5600000,
- .mode = SPI_MODE_0,
- },
- { /* User accessible spi1, cs3 used for communication with ext. DSP */
- .modalias = "spidev",
- .bus_num = 1,
- .chip_select = 3,
- .max_speed_hz = 5600000,
- .mode = SPI_MODE_0,
- }
-};
-
-/*
- * GPI Buttons
- */
-static struct gpio_keys_button buttons[] = {
- {
- .gpio = GPIO_TRIG_NET_IN,
- .code = BTN_1,
- .desc = "TRIG_NET_IN",
- .type = EV_KEY,
- .active_low = 0,
- .wakeup = 1,
- },
- { /* SW80 on the GS_IA18_S-MN board*/
- .gpio = GPIO_CARD_UNMOUNT_0,
- .code = BTN_2,
- .desc = "Card umount 0",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- },
- { /* SW79 on the GS_IA18_S-MN board*/
- .gpio = GPIO_CARD_UNMOUNT_1,
- .code = BTN_3,
- .desc = "Card umount 1",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- },
- { /* SW280 on the GS_IA18-CB board*/
- .gpio = GPIO_KEY_POWER,
- .code = KEY_POWER,
- .desc = "Power Off Button",
- .type = EV_KEY,
- .active_low = 0,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data button_data = {
- .buttons = buttons,
- .nbuttons = ARRAY_SIZE(buttons),
-};
-
-static struct platform_device button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &button_data,
- }
-};
-
-static void __init gsia18s_add_device_buttons(void)
-{
- at91_set_gpio_input(GPIO_TRIG_NET_IN, 1);
- at91_set_deglitch(GPIO_TRIG_NET_IN, 1);
- at91_set_gpio_input(GPIO_CARD_UNMOUNT_0, 1);
- at91_set_deglitch(GPIO_CARD_UNMOUNT_0, 1);
- at91_set_gpio_input(GPIO_CARD_UNMOUNT_1, 1);
- at91_set_deglitch(GPIO_CARD_UNMOUNT_1, 1);
- at91_set_gpio_input(GPIO_KEY_POWER, 0);
- at91_set_deglitch(GPIO_KEY_POWER, 1);
-
- platform_device_register(&button_device);
-}
-
-/*
- * I2C
- */
-static int pcf8574x_0x20_setup(struct i2c_client *client, int gpio,
- unsigned int ngpio, void *context)
-{
- int status;
-
- status = gpio_request(gpio + PCF_GPIO_ETH_DETECT, "eth_det");
- if (status < 0) {
- pr_err("error: can't request GPIO%d\n",
- gpio + PCF_GPIO_ETH_DETECT);
- return status;
- }
- status = gpio_direction_input(gpio + PCF_GPIO_ETH_DETECT);
- if (status < 0) {
- pr_err("error: can't setup GPIO%d as input\n",
- gpio + PCF_GPIO_ETH_DETECT);
- return status;
- }
- status = gpio_export(gpio + PCF_GPIO_ETH_DETECT, false);
- if (status < 0) {
- pr_err("error: can't export GPIO%d\n",
- gpio + PCF_GPIO_ETH_DETECT);
- return status;
- }
- status = gpio_sysfs_set_active_low(gpio + PCF_GPIO_ETH_DETECT, 1);
- if (status < 0) {
- pr_err("error: gpio_sysfs_set active_low(GPIO%d, 1)\n",
- gpio + PCF_GPIO_ETH_DETECT);
- return status;
- }
-
- return 0;
-}
-
-static int pcf8574x_0x20_teardown(struct i2c_client *client, int gpio,
- unsigned ngpio, void *context)
-{
- gpio_free(gpio + PCF_GPIO_ETH_DETECT);
- return 0;
-}
-
-static struct pcf857x_platform_data pcf20_pdata = {
- .gpio_base = GS_IA18_S_PCF_GPIO_BASE0,
- .n_latch = (1 << 4),
- .setup = pcf8574x_0x20_setup,
- .teardown = pcf8574x_0x20_teardown,
-};
-
-static struct pcf857x_platform_data pcf22_pdata = {
- .gpio_base = GS_IA18_S_PCF_GPIO_BASE1,
-};
-
-static struct pcf857x_platform_data pcf24_pdata = {
- .gpio_base = GS_IA18_S_PCF_GPIO_BASE2,
-};
-
-static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
- { /* U1 on the GS_IA18-CB_V3 board */
- I2C_BOARD_INFO("pcf8574", 0x20),
- .platform_data = &pcf20_pdata,
- },
- { /* U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
- I2C_BOARD_INFO("pcf8574", 0x22),
- .platform_data = &pcf22_pdata,
- },
- { /* U1 on the GS_2G-OPT23-A_V0 board (Modem) */
- I2C_BOARD_INFO("pcf8574", 0x24),
- .platform_data = &pcf24_pdata,
- },
- { /* U161 on the GS_IA18_S-MN board */
- I2C_BOARD_INFO("24c1024", 0x50),
- },
- { /* U162 on the GS_IA18_S-MN board */
- I2C_BOARD_INFO("24c01", 0x53),
- },
-};
-
-/*
- * Compact Flash
- */
-static struct at91_cf_data __initdata gsia18s_cf1_data = {
- .irq_pin = AT91_PIN_PA27,
- .det_pin = AT91_PIN_PB30,
- .vcc_pin = -EINVAL,
- .rst_pin = AT91_PIN_PB31,
- .chipselect = 5,
- .flags = AT91_CF_TRUE_IDE,
-};
-
-/* Power Off by RTC */
-static void gsia18s_power_off(void)
-{
- pr_notice("Power supply will be switched off automatically now or after 60 seconds without ArmDAS.\n");
- at91_set_gpio_output(AT91_PIN_PA25, 1);
- /* Spin to death... */
- while (1)
- ;
-}
-
-static int __init gsia18s_power_off_init(void)
-{
- pm_power_off = gsia18s_power_off;
- return 0;
-}
-
-/* ---------------------------------------------------------------------------*/
-
-static void __init gsia18s_board_init(void)
-{
- /*
- * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
- * Used for Internal Analog Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS |
- ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
- /*
- * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
- * Used for GPS or WiFi or Data stream.
- */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
- * Used for External Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US2, 3,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART3 on ttyS4 (Rx, Tx, RTS).
- * Used for RS-485.
- */
- at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
-
- /*
- * USART4 on ttyS5 (Rx, Tx).
- * Used for TRX433 Radio Module.
- */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
- stamp9g20_board_init();
- at91_add_device_usbh(&usbh_data);
- at91_add_device_udc(&udc_data);
- at91_add_device_eth(&macb_data);
- gsia18s_leds_init();
- gsia18s_pcf_leds_init();
- gsia18s_add_device_buttons();
- at91_add_device_i2c(gsia18s_i2c_devices,
- ARRAY_SIZE(gsia18s_i2c_devices));
- at91_add_device_cf(&gsia18s_cf1_data);
- at91_add_device_spi(gsia18s_spi_devices,
- ARRAY_SIZE(gsia18s_spi_devices));
- gsia18s_power_off_init();
-}
-
-MACHINE_START(GSIA18S, "GS_IA18_S")
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = gsia18s_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = gsia18s_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
deleted file mode 100644
index 9c26b94ce448..000000000000
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- * taskit GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-/*
- * copied and adjusted from board-stamp9g20.c
- * by Peter Gsellmann <pgsellmann@portner-elektronik.at>
- */
-
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "stamp9g20.h"
-#include "gpio.h"
-
-
-static void __init pcontrol_g20_init_early(void)
-{
- stamp9g20_init_early();
-}
-
-static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
- .ncs_read_setup = 16,
- .nrd_setup = 18,
- .ncs_write_setup = 16,
- .nwe_setup = 18,
-
- .ncs_read_pulse = 63,
- .nrd_pulse = 55,
- .ncs_write_pulse = 63,
- .nwe_pulse = 55,
-
- .read_cycle = 127,
- .write_cycle = 127,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
- | AT91_SMC_DBW_8 | AT91_SMC_PS_4
- | AT91_SMC_TDFMODE,
- .tdf_cycles = 3,
-}, {
- .ncs_read_setup = 0,
- .nrd_setup = 0,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 8,
- .nrd_pulse = 8,
- .ncs_write_pulse = 5,
- .nwe_pulse = 4,
-
- .read_cycle = 8,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
- | AT91_SMC_DBW_16 | AT91_SMC_PS_8
- | AT91_SMC_TDFMODE,
- .tdf_cycles = 1,
-} };
-
-static void __init add_device_pcontrol(void)
-{
- /* configure chip-select 4 (IO compatible to 8051 X4 ) */
- sam9_smc_configure(0, 4, &pcontrol_smc_config[0]);
- /* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A D4 ) */
- sam9_smc_configure(0, 7, &pcontrol_smc_config[1]);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata pcontrol_g20_udc_data = {
- .vbus_pin = AT91_PIN_PA22, /* Detect +5V bus voltage */
- .pullup_pin = AT91_PIN_PA4, /* K-state, active low */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
- .phy_irq_pin = AT91_PIN_PA28,
- .is_rmii = 1,
-};
-
-
-/*
- * I2C devices: eeprom and phy/switch
- */
-static struct i2c_board_info __initdata pcontrol_g20_i2c_devices[] = {
-{ /* D7 address width=2, 8KiB */
- I2C_BOARD_INFO("24c64", 0x50)
-}, { /* D8 address width=1, 1 byte has 32 bits! */
- I2C_BOARD_INFO("lan9303", 0x0a)
-}, };
-
-
-/*
- * LEDs
- */
-static struct gpio_led pcontrol_g20_leds[] = {
- {
- .name = "LED1", /* red H5 */
- .gpio = AT91_PIN_PB18,
- .active_low = 1,
- .default_trigger = "none", /* supervisor */
- }, {
- .name = "LED2", /* yellow H7 */
- .gpio = AT91_PIN_PB19,
- .active_low = 1,
- .default_trigger = "mmc0", /* SD-card activity */
- }, {
- .name = "LED3", /* green H2 */
- .gpio = AT91_PIN_PB20,
- .active_low = 1,
- .default_trigger = "heartbeat", /* blinky */
- }, {
- .name = "LED4", /* red H3 */
- .gpio = AT91_PIN_PC6,
- .active_low = 1,
- .default_trigger = "none", /* connection lost */
- }, {
- .name = "LED5", /* yellow H6 */
- .gpio = AT91_PIN_PC7,
- .active_low = 1,
- .default_trigger = "none", /* unsent data */
- }, {
- .name = "LED6", /* green H1 */
- .gpio = AT91_PIN_PC9,
- .active_low = 1,
- .default_trigger = "none", /* snafu */
- }
-};
-
-
-/*
- * SPI devices
- */
-static struct spi_board_info pcontrol_g20_spi_devices[] = {
- {
- .modalias = "spidev", /* HMI port X4 */
- .chip_select = 1,
- .max_speed_hz = 50 * 1000 * 1000,
- .bus_num = 0,
- }, {
- .modalias = "spidev", /* piggyback A2 */
- .chip_select = 0,
- .max_speed_hz = 50 * 1000 * 1000,
- .bus_num = 1,
- },
-};
-
-
-static void __init pcontrol_g20_board_init(void)
-{
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
- at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
- stamp9g20_board_init();
- at91_add_device_usbh(&usbh_data);
- at91_add_device_eth(&macb_data);
- at91_add_device_i2c(pcontrol_g20_i2c_devices,
- ARRAY_SIZE(pcontrol_g20_i2c_devices));
- add_device_pcontrol();
- at91_add_device_spi(pcontrol_g20_spi_devices,
- ARRAY_SIZE(pcontrol_g20_spi_devices));
- at91_add_device_udc(&pcontrol_g20_udc_data);
- at91_gpio_leds(pcontrol_g20_leds,
- ARRAY_SIZE(pcontrol_g20_leds));
- /* piggyback A2 */
- at91_set_gpio_output(AT91_PIN_PB31, 1);
-}
-
-
-MACHINE_START(PCONTROL_G20, "PControl G20")
- /* Maintainer: pgsellmann@portner-elektronik.at */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = pcontrol_g20_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = pcontrol_g20_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
deleted file mode 100644
index c2166e3a236c..000000000000
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-sam9-l9260.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2007 Olimex Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 0,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Bootloader Area",
- .offset = 0,
- .size = 10 * SZ_1M,
- },
- {
- .name = "User Area",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .ecc_mode = NAND_ECC_SOFT,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata ek_mci0_data = {
- .slot[1] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC8,
- .wp_pin = AT91_PIN_PC4,
- },
-};
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PA9,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* D2 */
- .name = "led2",
- .gpio = AT91_PIN_PA6,
- .active_low = 1,
- .default_trigger = "timer",
- }
-};
-
-static void __init ek_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* NAND */
- ek_add_device_nand();
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* MMC */
- at91_add_device_mci(0, &ek_mci0_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-}
-
-MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
- /* Maintainer: Olimex */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
deleted file mode 100644
index bf8a946b4cd0..000000000000
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-sam9260ek.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/clk.h>
-#include <linux/platform_data/at24.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * Audio
- */
-static struct at73c213_board_info at73c213_data = {
- .ssc_id = 0,
- .shortname = "AT91SAM9260-EK external DAC",
-};
-
-#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-static void __init at73c213_set_clk(struct at73c213_board_info *info)
-{
- struct clk *pck0;
- struct clk *plla;
-
- pck0 = clk_get(NULL, "pck0");
- plla = clk_get(NULL, "plla");
-
- /* AT73C213 MCK Clock */
- at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */
-
- clk_set_parent(pck0, plla);
- clk_put(plla);
-
- info->dac_clk = pck0;
-}
-#else
-static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#endif
-#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
- { /* AT73C213 DAC */
- .modalias = "at73c213",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 1,
- .mode = SPI_MODE_1,
- .platform_data = &at73c213_data,
- },
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_256K,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata ek_mci0_data = {
- .slot[1] = {
- .bus_width = 4,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* "bottom" led, green, userled1 to be defined */
- .name = "ds5",
- .gpio = AT91_PIN_PA6,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* "power" led, yellow */
- .name = "ds1",
- .gpio = AT91_PIN_PA9,
- .default_trigger = "heartbeat",
- }
-};
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c512 = {
- .byte_len = SZ_512K / 8,
- .page_size = 128,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c512", 0x50),
- .platform_data = &at24c512,
- },
- /* more devices can be added using expansion connectors */
-};
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- {
- .gpio = AT91_PIN_PA30,
- .code = BTN_3,
- .desc = "Button 3",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA31,
- .code = BTN_4,
- .desc = "Button 4",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
- at91_set_deglitch(AT91_PIN_PA30, 1);
- at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
- at91_set_deglitch(AT91_PIN_PA31, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-static void __init ek_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* NAND */
- ek_add_device_nand();
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* MMC */
- at91_add_device_mci(0, &ek_mci0_data);
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* SSC (to AT73C213) */
- at73c213_set_clk(&at73c213_data);
- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* Push Buttons */
- ek_add_device_buttons();
-}
-
-MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
deleted file mode 100644
index 49f075213451..000000000000
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2008 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-
-#include <linux/platform_data/at91_adc.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-/*
- * board revision encoding
- * bit 0:
- * 0 => 1 sd/mmc slot
- * 1 => 2 sd/mmc slots connectors (board from revision C)
- */
-#define HAVE_2MMC (1 << 0)
-static int inline ek_have_2mmc(void)
-{
- return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC);
-}
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 1,
-};
-
-static void __init ek_add_device_macb(void)
-{
- if (ek_have_2mmc())
- ek_macb_data.phy_irq_pin = AT91_PIN_PB0;
-
- at91_add_device_eth(&ek_macb_data);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Bootstrap",
- .offset = 0,
- .size = 4 * SZ_1M,
- },
- {
- .name = "Partition 1",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 60 * SZ_1M,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .det_pin = -EINVAL,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- * wp_pin and vcc_pin are not connected
- */
-static struct mci_platform_data __initdata ek_mmc_data = {
- .slot[1] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC9,
- .wp_pin = -EINVAL,
- },
-
-};
-
-static void __init ek_add_device_mmc(void)
-{
- if (ek_have_2mmc()) {
- ek_mmc_data.slot[0].bus_width = 4;
- ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
- ek_mmc_data.slot[0].wp_pin = -1;
- }
- at91_add_device_mci(0, &ek_mmc_data);
-}
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* "bottom" led, green, userled1 to be defined */
- .name = "ds5",
- .gpio = AT91_PIN_PA6,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* "power" led, yellow */
- .name = "ds1",
- .gpio = AT91_PIN_PA9,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init ek_add_device_gpio_leds(void)
-{
- if (ek_have_2mmc()) {
- ek_leds[0].gpio = AT91_PIN_PB8;
- ek_leds[1].gpio = AT91_PIN_PB9;
- }
-
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-}
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- {
- .gpio = AT91_PIN_PA30,
- .code = BTN_3,
- .desc = "Button 3",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA31,
- .code = BTN_4,
- .desc = "Button 4",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
- at91_set_deglitch(AT91_PIN_PA30, 1);
- at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
- at91_set_deglitch(AT91_PIN_PA31, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * ADCs
- */
-
-static struct at91_adc_data ek_adc_data = {
- .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3),
- .use_external_triggers = true,
- .vref = 3300,
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
- REGULATOR_SUPPLY("AVDD", "0-001b"),
- REGULATOR_SUPPLY("HPVDD", "0-001b"),
- REGULATOR_SUPPLY("DBVDD", "0-001b"),
- REGULATOR_SUPPLY("DCVDD", "0-001b"),
-};
-
-static struct regulator_init_data ek_avdd_reg_init_data = {
- .constraints = {
- .name = "3V3",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .consumer_supplies = ek_audio_consumer_supplies,
- .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config ek_vdd_pdata = {
- .supply_name = "board-3V3",
- .microvolts = 3300000,
- .gpio = -EINVAL,
- .enabled_at_boot = 0,
- .init_data = &ek_avdd_reg_init_data,
-};
-static struct platform_device ek_voltage_regulator = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_vdd_pdata,
- },
-};
-static void __init ek_add_regulators(void)
-{
- platform_device_register(&ek_voltage_regulator);
-}
-#else
-static void __init ek_add_regulators(void) {}
-#endif
-
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c512", 0x50)
- },
- {
- I2C_BOARD_INFO("wm8731", 0x1b)
- },
-};
-
-static struct platform_device sam9g20ek_audio_device = {
- .name = "at91sam9g20ek-audio",
- .id = -1,
-};
-
-static void __init ek_add_device_audio(void)
-{
- platform_device_register(&sam9g20ek_audio_device);
-}
-
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* NAND */
- ek_add_device_nand();
- /* Ethernet */
- ek_add_device_macb();
- /* Regulators */
- ek_add_regulators();
- /* MMC */
- ek_add_device_mmc();
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* LEDs */
- ek_add_device_gpio_leds();
- /* Push Buttons */
- ek_add_device_buttons();
- /* ADCs */
- at91_add_device_adc(&ek_adc_data);
- /* PCK0 provides MCLK to the WM8731 */
- at91_set_B_periph(AT91_PIN_PC1, 0);
- /* SSC (for WM8731) */
- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
- ek_add_device_audio();
-}
-
-MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
-
-MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
deleted file mode 100644
index b4aff840a1a0..000000000000
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-snapper9260.c
- *
- * Copyright (C) 2010 Bluewater System Ltd
- *
- * Author: Andre Renaud <andre@bluewatersys.com>
- * Author: Ryan Mallon
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/pca953x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x))
-
-static void __init snapper9260_init_early(void)
-{
- at91_initialize(18432000);
-}
-
-static struct at91_usbh_data __initdata snapper9260_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata snapper9260_udc_data = {
- .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5),
- .vbus_active_low = 1,
- .vbus_polled = 1,
- .pullup_pin = -EINVAL,
-};
-
-static struct macb_platform_data snapper9260_macb_data = {
- .phy_irq_pin = -EINVAL,
- .is_rmii = 1,
-};
-
-static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
- {
- .name = "Preboot",
- .offset = 0,
- .size = SZ_128K,
- },
- {
- .name = "Bootloader",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K,
- },
- {
- .name = "Environment",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- },
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- },
- {
- .name = "Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata snapper9260_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .parts = snapper9260_nand_partitions,
- .num_parts = ARRAY_SIZE(snapper9260_nand_partitions),
- .bus_width_16 = 0,
- .enable_pin = -EINVAL,
- .det_pin = -EINVAL,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 0,
- .ncs_write_setup = 0,
- .nwe_setup = 0,
-
- .ncs_read_pulse = 5,
- .nrd_pulse = 2,
- .ncs_write_pulse = 5,
- .nwe_pulse = 2,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE),
- .tdf_cycles = 1,
-};
-
-static struct pca953x_platform_data snapper9260_io_expander_data = {
- .gpio_base = SNAPPER9260_IO_EXP_GPIO(0),
-};
-
-static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
- {
- /* IO expander */
- I2C_BOARD_INFO("max7312", 0x28),
- .platform_data = &snapper9260_io_expander_data,
- },
- {
- /* Audio codec */
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = {
- /* RTC */
- I2C_BOARD_INFO("isl1208", 0x6f),
-};
-
-static void __init snapper9260_add_device_nand(void)
-{
- at91_set_A_periph(AT91_PIN_PC14, 0);
- sam9_smc_configure(0, 3, &snapper9260_nand_smc_config);
- at91_add_device_nand(&snapper9260_nand_data);
-}
-
-static void __init snapper9260_board_init(void)
-{
- at91_register_devices();
-
- at91_add_device_i2c(snapper9260_i2c_devices,
- ARRAY_SIZE(snapper9260_i2c_devices));
-
- snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
- i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
-
- /* Debug on ttyS0 */
- at91_register_uart(0, 0, 0);
-
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
- at91_add_device_serial();
- at91_add_device_usbh(&snapper9260_usbh_data);
- at91_add_device_udc(&snapper9260_udc_data);
- at91_add_device_eth(&snapper9260_macb_data);
- at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
- ATMEL_SSC_TD | ATMEL_SSC_RD));
- snapper9260_add_device_nand();
-}
-
-MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = snapper9260_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = snapper9260_board_init,
-MACHINE_END
-
-
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
deleted file mode 100644
index e825641a1dee..000000000000
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- * taskit GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-void __init stamp9g20_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * NAND flash
- */
-static struct atmel_nand_data __initdata nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .bus_width_16 = 0,
- .det_pin = -EINVAL,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct sam9_smc_config __initdata nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 3,
-};
-
-static void __init add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &nand_smc_config);
-
- at91_add_device_nand(&nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-static struct mci_platform_data __initdata mmc_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = -1,
- .wp_pin = -1,
- },
-};
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata portuxg20_udc_data = {
- .vbus_pin = AT91_PIN_PC7,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
- .vbus_pin = AT91_PIN_PA22,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
- .phy_irq_pin = AT91_PIN_PA28,
- .is_rmii = 1,
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led portuxg20_leds[] = {
- {
- .name = "LED2",
- .gpio = AT91_PIN_PC5,
- .default_trigger = "none",
- }, {
- .name = "LED3",
- .gpio = AT91_PIN_PC4,
- .default_trigger = "none",
- }, {
- .name = "LED4",
- .gpio = AT91_PIN_PC10,
- .default_trigger = "heartbeat",
- }
-};
-
-static struct gpio_led stamp9g20evb_leds[] = {
- {
- .name = "D8",
- .gpio = AT91_PIN_PB18,
- .active_low = 1,
- .default_trigger = "none",
- }, {
- .name = "D9",
- .gpio = AT91_PIN_PB19,
- .active_low = 1,
- .default_trigger = "none",
- }, {
- .name = "D10",
- .gpio = AT91_PIN_PB20,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-
-/*
- * SPI devices
- */
-static struct spi_board_info portuxg20_spi_devices[] = {
- {
- .modalias = "spidev",
- .chip_select = 0,
- .max_speed_hz = 1 * 1000 * 1000,
- .bus_num = 0,
- }, {
- .modalias = "spidev",
- .chip_select = 0,
- .max_speed_hz = 1 * 1000 * 1000,
- .bus_num = 1,
- },
-};
-
-
-/*
- * Dallas 1-Wire
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
- .pin = AT91_PIN_PA29,
- .is_open_drain = 1,
- .ext_pullup_enable_pin = -EINVAL,
-};
-
-static struct platform_device w1_device = {
- .name = "w1-gpio",
- .id = -1,
- .dev.platform_data = &w1_gpio_pdata,
-};
-
-void add_w1(void)
-{
- at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
- at91_set_multi_drive(w1_gpio_pdata.pin, 1);
- platform_device_register(&w1_device);
-}
-
-
-void __init stamp9g20_board_init(void)
-{
- /* Serial */
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* NAND */
- add_device_nand();
- /* MMC */
- at91_add_device_mci(0, &mmc_data);
- /* W1 */
- add_w1();
-}
-
-static void __init portuxg20_board_init(void)
-{
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART4 on ttyS5. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
- stamp9g20_board_init();
- /* USB Host */
- at91_add_device_usbh(&usbh_data);
- /* USB Device */
- at91_add_device_udc(&portuxg20_udc_data);
- /* Ethernet */
- at91_add_device_eth(&macb_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
- /* LEDs */
- at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
-}
-
-static void __init stamp9g20evb_board_init(void)
-{
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
- stamp9g20_board_init();
- /* USB Host */
- at91_add_device_usbh(&usbh_data);
- /* USB Device */
- at91_add_device_udc(&stamp9g20evb_udc_data);
- /* Ethernet */
- at91_add_device_eth(&macb_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* LEDs */
- at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
-}
-
-MACHINE_START(PORTUXG20, "taskit PortuxG20")
- /* Maintainer: taskit GmbH */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = stamp9g20_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = portuxg20_board_init,
-MACHINE_END
-
-MACHINE_START(STAMP9G20, "taskit Stamp9G20")
- /* Maintainer: taskit GmbH */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = stamp9g20_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = stamp9g20evb_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/stamp9g20.h b/arch/arm/mach-at91/stamp9g20.h
deleted file mode 100644
index f62c0abca4b4..000000000000
--- a/arch/arm/mach-at91/stamp9g20.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_STAMP9G20_H
-#define __MACH_STAMP9G20_H
-
-void stamp9g20_init_early(void);
-void stamp9g20_board_init(void);
-
-#endif
--
2.1.3
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 3/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy board support
2014-11-19 10:31 [PATCH 0/4] ARM: at91: remove !DT support for at91sam9260/9g20 and at91sam9263 Nicolas Ferre
2014-11-19 10:31 ` [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support Nicolas Ferre
2014-11-19 10:31 ` [PATCH 2/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files Nicolas Ferre
@ 2014-11-19 10:31 ` Nicolas Ferre
2014-12-01 11:55 ` Paul Bolle
2014-11-19 10:31 ` [PATCH 4/4] ARM: at91/Kconfig: remove unused config options Nicolas Ferre
3 siblings, 1 reply; 13+ messages in thread
From: Nicolas Ferre @ 2014-11-19 10:31 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Jean-Christophe PLAGNIOL-VILLARD, Boris BREZILLON,
Alexandre Belloni, Ludovic Desroches, Nicolas Ferre
Second part of at91sam9260/at91sam9g20 legacy !DT removal. This is the core !DT
support removal for these two Atmel SoCs.
Use the Device Tree for running this board with newer kernels.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/configs/at91sam9260_9g20_defconfig | 145 ---
arch/arm/mach-at91/Kconfig.non_dt | 117 ---
arch/arm/mach-at91/Makefile | 1 -
arch/arm/mach-at91/at91sam9260.c | 397 --------
arch/arm/mach-at91/at91sam9260_devices.c | 1364 ---------------------------
5 files changed, 2024 deletions(-)
delete mode 100644 arch/arm/configs/at91sam9260_9g20_defconfig
delete mode 100644 arch/arm/mach-at91/at91sam9260_devices.c
diff --git a/arch/arm/configs/at91sam9260_9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig
deleted file mode 100644
index 3ada05d639ad..000000000000
--- a/arch/arm/configs/at91sam9260_9g20_defconfig
+++ /dev/null
@@ -1,145 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_AT91SAM9260EK=y
-CONFIG_MACH_CAM60=y
-CONFIG_MACH_SAM9_L9260=y
-CONFIG_MACH_AFEB9260=y
-CONFIG_MACH_CPU9260=y
-CONFIG_MACH_FLEXIBITY=y
-CONFIG_MACH_AT91SAM9G20EK=y
-CONFIG_MACH_AT91SAM9G20EK_2MMC=y
-CONFIG_MACH_CPU9G20=y
-CONFIG_MACH_ACMENETUSFOXG20=y
-CONFIG_MACH_PORTUXG20=y
-CONFIG_MACH_STAMP9G20=y
-CONFIG_MACH_PCONTROL_G20=y
-CONFIG_MACH_GSIA18S=y
-CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM9_DT=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MACB=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_AT91=y
-CONFIG_USB_G_SERIAL=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RV3029C2=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_IIO=y
-CONFIG_AT91_ADC=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index a9458234ab23..079772047541 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -15,12 +15,6 @@ config ARCH_AT91RM9200
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
-config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
- select SOC_AT91SAM9260
- select AT91_USE_OLD_CLK
- select OLD_IRQ_AT91
-
config ARCH_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
select SOC_AT91SAM9261
@@ -29,10 +23,6 @@ config ARCH_AT91SAM9261
endchoice
-config ARCH_AT91SAM9G20
- bool
- select ARCH_AT91SAM9260
-
config ARCH_AT91SAM9G10
bool
select ARCH_AT91SAM9261
@@ -123,113 +113,6 @@ endif
# ----------------------------------------------------------
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
- bool "KwikByte KB9260 (CAM60) board"
- help
- Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
- <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
- bool "Olimex SAM9-L9260 board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
- <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
- bool "Custom afeb9260 board v1"
- help
- Select this if you are using custom afeb9260 board based on
- open hardware design. Select this for revision 1 of the board.
- <svn://194.85.238.22/home/users/george/svn/arm9eb>
- <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_CPU9260
- bool "Eukrea CPU9260 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
- bool "Flexibity Connect board"
- help
- Select this if you are using Flexibity Connect board
- <http://www.flexibity.com>
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
- that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
- depends on MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
- onwards.
- <http://www.atmel.com/tools/SAM9G20-EK.aspx>
-
-config MACH_CPU9G20
- bool "Eukrea CPU9G20 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_PORTUXG20
- bool "taskit PortuxG20"
- help
- Select this if you are using taskit's PortuxG20.
- <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
- bool "taskit Stamp9G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on its
- evaluation board.
- <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
- bool "PControl G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on this
- carrier board, being the decentralized unit of a building automation
- system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
- bool "GS_IA18_S board"
- help
- This enables support for the GS_IA18_S board
- produced by GeoSIG Ltd company. This is an internet accelerograph.
- <http://www.geosig.com>
-
-config MACH_SNAPPER_9260
- bool "Bluewater Systems Snapper 9260/9G20 module"
- help
- Select this if you are using the Bluewater Systems Snapper 9260 or
- Snapper 9G20 modules.
- <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
if ARCH_AT91SAM9261
comment "AT91SAM9261 Board Type"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 88d49248fc5c..bfe918b5fbc5 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
# AT91RM9200 board-specific support
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index aab1f969a7c3..78137c24d90b 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -10,305 +10,13 @@
*
*/
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
-#include <mach/at91sam9260.h>
#include <mach/hardware.h>
-#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk adc_op_clk = {
- .name = "adc_op_clk",
- .type = CLK_TYPE_PERIPHERAL,
- .rate_hz = 5000000,
-};
-
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc_clk = {
- .name = "ssc_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_SSC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
- .name = "tc1_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
- .name = "tc2_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91SAM9260_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart4_clk = {
- .name = "usart4_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US4,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart5_clk = {
- .name = "usart5_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US5,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc3_clk = {
- .name = "tc3_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc4_clk = {
- .name = "tc4_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC4,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc5_clk = {
- .name = "tc5_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC5,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &adc_clk,
- &adc_op_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc_clk,
- &udc_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
- &ohci_clk,
- &macb_clk,
- &isi_clk,
- &usart3_clk,
- &usart4_clk,
- &usart5_clk,
- &tc3_clk,
- &tc4_clk,
- &tc5_clk,
- // irq0 .. irq2
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* One additional fake clock for macb_hclk */
- CLKDEV_CON_ID("hclk", &macb_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
- /* more usart lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
- CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
- CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
- /* more tc lookup table for DT entries */
- CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
- CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
- /* fake hclk clock */
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
- CLKDEV_CON_ID("pioA", &pioA_clk),
- CLKDEV_CON_ID("pioB", &pioB_clk),
- CLKDEV_CON_ID("pioC", &pioC_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-
-static void __init at91sam9260_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
-}
-#else
-#define at91sam9260_register_clocks NULL
-#endif
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9260_gpio[] __initdata = {
- {
- .id = AT91SAM9260_ID_PIOA,
- .regbase = AT91SAM9260_BASE_PIOA,
- }, {
- .id = AT91SAM9260_ID_PIOB,
- .regbase = AT91SAM9260_BASE_PIOB,
- }, {
- .id = AT91SAM9260_ID_PIOC,
- .regbase = AT91SAM9260_BASE_PIOC,
- }
-};
/* --------------------------------------------------------------------
* AT91SAM9260 processor initialization
@@ -340,119 +48,14 @@ static void __init at91sam9260_map_io(void)
at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE);
}
-static void __init at91sam9260_ioremap_registers(void)
-{
- at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512);
- at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
- at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX);
- at91_pm_set_standby(at91sam9_sdram_standby);
-}
-
static void __init at91sam9260_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9260_gpio, 3);
-}
-
-static struct resource rstc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_RSTC,
- .end = AT91SAM9260_BASE_RSTC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_BASE_SDRAMC,
- .end = AT91SAM9260_BASE_SDRAMC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rstc_device = {
- .name = "at91-sam9260-reset",
- .resource = rstc_resources,
- .num_resources = ARRAY_SIZE(rstc_resources),
-};
-
-static struct resource shdwc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SHDWC,
- .end = AT91SAM9260_BASE_SHDWC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device shdwc_device = {
- .name = "at91-poweroff",
- .resource = shdwc_resources,
- .num_resources = ARRAY_SIZE(shdwc_resources),
-};
-
-static void __init at91sam9260_register_devices(void)
-{
- platform_device_register(&rstc_device);
- platform_device_register(&shdwc_device);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A */
- 1, /* Parallel IO Controller B */
- 1, /* Parallel IO Controller C */
- 0, /* Analog-to-Digital Converter */
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 0, /* Multimedia Card Interface */
- 2, /* USB Device Port */
- 6, /* Two-Wire Interface */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller */
- 0,
- 0,
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 2, /* USB Host port */
- 3, /* Ethernet */
- 0, /* Image Sensor Interface */
- 5, /* USART 3 */
- 5, /* USART 4 */
- 5, /* USART 5 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
-};
-
-static void __init at91sam9260_init_time(void)
-{
- at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
}
AT91_SOC_START(at91sam9260)
.map_io = at91sam9260_map_io,
- .default_irq_priority = at91sam9260_default_irq_priority,
- .extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
- | (1 << AT91SAM9260_ID_IRQ2),
- .ioremap_registers = at91sam9260_ioremap_registers,
- .register_clocks = at91sam9260_register_clocks,
- .register_devices = at91sam9260_register_devices,
.init = at91sam9260_initialize,
- .init_time = at91sam9260_init_time,
AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
deleted file mode 100644
index ef88e0fe4e80..000000000000
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ /dev/null
@@ -1,1364 +0,0 @@
-/*
- * arch/arm/mach-at91/at91sam9260_devices.c
- *
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/platform_data/at91_adc.h>
-
-#include <mach/cpu.h>
-#include <mach/at91sam9260.h>
-#include <mach/at91sam9260_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91SAM9260_UHP_BASE,
- .end = AT91SAM9260_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->overcurrent_pin[i]))
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_data = *data;
- platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_UDP,
- .end = AT91SAM9260_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- udc_data = *data;
- platform_device_register(&at91_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_EMAC,
- .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->phy_irq_pin)) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
-
- if (!data->is_rmii) {
- at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
- }
-
- eth_data = *data;
- platform_device_register(&at91sam9260_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD Slot for Atmel MCI Driver
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_MCI,
- .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_mmc_device = {
- .name = "atmel_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
- unsigned int i;
- unsigned int slot_count = 0;
-
- if (!data)
- return;
-
- for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
- if (data->slot[i].bus_width) {
- /* input/irq */
- if (gpio_is_valid(data->slot[i].detect_pin)) {
- at91_set_gpio_input(data->slot[i].detect_pin, 1);
- at91_set_deglitch(data->slot[i].detect_pin, 1);
- }
- if (gpio_is_valid(data->slot[i].wp_pin))
- at91_set_gpio_input(data->slot[i].wp_pin, 1);
-
- switch (i) {
- case 0:
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA6, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
- }
- slot_count++;
- break;
- case 1:
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA3, 1);
- }
- slot_count++;
- break;
- default:
- printk(KERN_ERR
- "AT91: SD/MMC slot %d not available\n", i);
- break;
- }
- }
- }
-
- if (slot_count) {
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA8, 0);
-
- mmc_data = *data;
- platform_device_register(&at91sam9260_mmc_device);
- }
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_BASE_ECC,
- .end = AT91SAM9260_BASE_ECC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9260_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_matrix_read(AT91_MATRIX_EBICSA);
- at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- nand_data = *data;
- platform_device_register(&at91sam9260_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PA23,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA24,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9260_twi_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9260_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_TWI,
- .end = AT91SAM9260_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_twi_device = {
- .id = 0,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* IP version is not the same on 9260 and g20 */
- if (cpu_is_at91sam9g20()) {
- at91sam9260_twi_device.name = "i2c-at91sam9g20";
- } else {
- at91sam9260_twi_device.name = "i2c-at91sam9260";
- }
-
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9260_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SPI0,
- .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SPI1,
- .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (!gpio_is_valid(cs_pin))
- continue;
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91sam9260_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91sam9260_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_TCB0,
- .end = AT91SAM9260_BASE_TCB0 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_tcb0_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb0_resources,
- .num_resources = ARRAY_SIZE(tcb0_resources),
-};
-
-static struct resource tcb1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_TCB1,
- .end = AT91SAM9260_BASE_TCB1 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_tcb1_device = {
- .name = "atmel_tcb",
- .id = 1,
- .resource = tcb1_resources,
- .num_resources = ARRAY_SIZE(tcb1_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at91sam9260_tcb0_device);
- platform_device_register(&at91sam9260_tcb1_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91SAM9260_BASE_RTT,
- .end = AT91SAM9260_BASE_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
-};
-
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
- at91sam9260_rtt_device.name = "rtc-at91sam9";
- /*
- * The second resource is needed:
- * GPBR will serve as the storage for RTC time offset
- */
- at91sam9260_rtt_device.num_resources = 3;
- rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
- 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
- rtt_resources[1].end = rtt_resources[1].start + 3;
- rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
- rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
- /* Only one resource is needed: RTT not used as RTC */
- at91sam9260_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
- at91_add_device_rtt_rtc();
- platform_device_register(&at91sam9260_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91SAM9260_BASE_WDT,
- .end = AT91SAM9260_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9260_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91sam9260_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SSC,
- .end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_ssc_device = {
- .name = "at91rm9200_ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc_resources,
- .num_resources = ARRAY_SIZE(ssc_resources),
-};
-
-static inline void configure_ssc_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB17, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB16, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB18, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB19, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB20, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB21, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91SAM9260_ID_SSC:
- pdev = &at91sam9260_ssc_device;
- configure_ssc_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_DBGU,
- .end = AT91SAM9260_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US0,
- .end = AT91SAM9260_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
- if (pins & ATMEL_UART_DTR)
- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
- if (pins & ATMEL_UART_DSR)
- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
- if (pins & ATMEL_UART_DCD)
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
- if (pins & ATMEL_UART_RI)
- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US1,
- .end = AT91SAM9260_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US2,
- .end = AT91SAM9260_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US3,
- .end = AT91SAM9260_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .dma_mask = &uart3_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
-}
-
-static struct resource uart4_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US4,
- .end = AT91SAM9260_BASE_US4 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart4_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart4_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart4_device = {
- .name = "atmel_usart",
- .id = 5,
- .dev = {
- .dma_mask = &uart4_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart4_data,
- },
- .resource = uart4_resources,
- .num_resources = ARRAY_SIZE(uart4_resources),
-};
-
-static inline void configure_usart4_pins(void)
-{
- at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
- at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
-}
-
-static struct resource uart5_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US5,
- .end = AT91SAM9260_BASE_US5 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart5_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart5_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart5_device = {
- .name = "atmel_usart",
- .id = 6,
- .dev = {
- .dma_mask = &uart5_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart5_data,
- },
- .resource = uart5_resources,
- .num_resources = ARRAY_SIZE(uart5_resources),
-};
-
-static inline void configure_usart5_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9260_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91SAM9260_ID_US0:
- pdev = &at91sam9260_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91SAM9260_ID_US1:
- pdev = &at91sam9260_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91SAM9260_ID_US2:
- pdev = &at91sam9260_uart2_device;
- configure_usart2_pins(pins);
- break;
- case AT91SAM9260_ID_US3:
- pdev = &at91sam9260_uart3_device;
- configure_usart3_pins(pins);
- break;
- case AT91SAM9260_ID_US4:
- pdev = &at91sam9260_uart4_device;
- configure_usart4_pins();
- break;
- case AT91SAM9260_ID_US5:
- pdev = &at91sam9260_uart5_device;
- configure_usart5_pins();
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- * CF/IDE
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
- defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-
-static struct at91_cf_data cf0_data;
-
-static struct resource cf0_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_4,
- .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device cf0_device = {
- .id = 0,
- .dev = {
- .platform_data = &cf0_data,
- },
- .resource = cf0_resources,
- .num_resources = ARRAY_SIZE(cf0_resources),
-};
-
-static struct at91_cf_data cf1_data;
-
-static struct resource cf1_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_5,
- .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device cf1_device = {
- .id = 1,
- .dev = {
- .platform_data = &cf1_data,
- },
- .resource = cf1_resources,
- .num_resources = ARRAY_SIZE(cf1_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
- struct platform_device *pdev;
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-
- switch (data->chipselect) {
- case 4:
- at91_set_multi_drive(AT91_PIN_PC8, 0);
- at91_set_A_periph(AT91_PIN_PC8, 0);
- csa |= AT91_MATRIX_CS4A_SMC_CF1;
- cf0_data = *data;
- pdev = &cf0_device;
- break;
- case 5:
- at91_set_multi_drive(AT91_PIN_PC9, 0);
- at91_set_A_periph(AT91_PIN_PC9, 0);
- csa |= AT91_MATRIX_CS5A_SMC_CF2;
- cf1_data = *data;
- pdev = &cf1_device;
- break;
- default:
- printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
- data->chipselect);
- return;
- }
-
- at91_matrix_write(AT91_MATRIX_EBICSA, csa);
-
- if (gpio_is_valid(data->rst_pin)) {
- at91_set_multi_drive(data->rst_pin, 0);
- at91_set_gpio_output(data->rst_pin, 1);
- }
-
- if (gpio_is_valid(data->irq_pin)) {
- at91_set_gpio_input(data->irq_pin, 0);
- at91_set_deglitch(data->irq_pin, 1);
- }
-
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 0);
- at91_set_deglitch(data->det_pin, 1);
- }
-
- at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */
- at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */
- at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */
-
- if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE))
- pdev->name = "pata_at91";
- else
- pdev->name = "at91_cf";
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_cf(struct at91_cf_data * data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * ADCs
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_AT91_ADC)
-static struct at91_adc_data adc_data;
-
-static struct resource adc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_ADC,
- .end = AT91SAM9260_BASE_ADC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_adc_device = {
- .name = "at91sam9260-adc",
- .id = -1,
- .dev = {
- .platform_data = &adc_data,
- },
- .resource = adc_resources,
- .num_resources = ARRAY_SIZE(adc_resources),
-};
-
-static struct at91_adc_trigger at91_adc_triggers[] = {
- [0] = {
- .name = "timer-counter-0",
- .value = 0x1,
- },
- [1] = {
- .name = "timer-counter-1",
- .value = 0x3,
- },
- [2] = {
- .name = "timer-counter-2",
- .value = 0x5,
- },
- [3] = {
- .name = "external",
- .value = 0xd,
- .is_external = true,
- },
-};
-
-void __init at91_add_device_adc(struct at91_adc_data *data)
-{
- if (!data)
- return;
-
- if (test_bit(0, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PC0, 0);
- if (test_bit(1, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PC1, 0);
- if (test_bit(2, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PC2, 0);
- if (test_bit(3, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PC3, 0);
-
- if (data->use_external_triggers)
- at91_set_A_periph(AT91_PIN_PA22, 0);
-
- data->startup_time = 10;
- data->trigger_number = 4;
- data->trigger_list = at91_adc_triggers;
-
- adc_data = *data;
- platform_device_register(&at91_adc_device);
-}
-#else
-void __init at91_add_device_adc(struct at91_adc_data *data) {}
-#endif
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- if (of_have_populated_dt())
- return 0;
-
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
--
2.1.3
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 4/4] ARM: at91/Kconfig: remove unused config options
2014-11-19 10:31 [PATCH 0/4] ARM: at91: remove !DT support for at91sam9260/9g20 and at91sam9263 Nicolas Ferre
` (2 preceding siblings ...)
2014-11-19 10:31 ` [PATCH 3/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy board support Nicolas Ferre
@ 2014-11-19 10:31 ` Nicolas Ferre
3 siblings, 0 replies; 13+ messages in thread
From: Nicolas Ferre @ 2014-11-19 10:31 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Jean-Christophe PLAGNIOL-VILLARD, Boris BREZILLON,
Alexandre Belloni, Ludovic Desroches, Nicolas Ferre
When removing old board !DT support, several Kconfig options were deleted.
Propagate this removal to drivers Kconfig files.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/misc/Kconfig | 2 +-
drivers/rtc/Kconfig | 4 +---
drivers/video/backlight/Kconfig | 1 -
3 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index bbeb4516facf..006242c8bca0 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -75,7 +75,7 @@ config ATMEL_TCB_CLKSRC
config ATMEL_TCB_CLKSRC_BLOCK
int
depends on ATMEL_TCB_CLKSRC
- prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
+ prompt "TC Block" if CPU_AT32AP700X
default 0
range 0 1
help
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 7e024f1344c6..aa96e375915d 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1124,7 +1124,6 @@ config RTC_DRV_AT91SAM9_RTT
int
range 0 1
default 0
- prompt "RTT module Number" if ARCH_AT91SAM9263
depends on RTC_DRV_AT91SAM9
help
More than one RTT module is available. You can choose which
@@ -1133,8 +1132,7 @@ config RTC_DRV_AT91SAM9_RTT
config RTC_DRV_AT91SAM9_GPBR
int
- range 0 3 if !ARCH_AT91SAM9263
- range 0 15 if ARCH_AT91SAM9263
+ range 0 3
default 0
prompt "Backup Register Number"
depends on RTC_DRV_AT91SAM9
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 8d03924749b8..efb09046a8cf 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -168,7 +168,6 @@ if BACKLIGHT_CLASS_DEVICE
config BACKLIGHT_ATMEL_LCDC
bool "Atmel LCDC Contrast-as-Backlight control"
depends on FB_ATMEL
- default y if MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK
help
This provides a backlight control internal to the Atmel LCDC
driver. If the LCD "contrast control" on your board is wired
--
2.1.3
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support
2014-11-19 10:31 ` [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support Nicolas Ferre
@ 2014-11-19 10:38 ` Nicolas Ferre
2014-12-01 11:52 ` Paul Bolle
1 sibling, 0 replies; 13+ messages in thread
From: Nicolas Ferre @ 2014-11-19 10:38 UTC (permalink / raw)
To: linux-arm-kernel
Cc: linux-kernel, Jean-Christophe PLAGNIOL-VILLARD, Boris BREZILLON,
Alexandre Belloni, Ludovic Desroches
On 19/11/2014 11:31, Nicolas Ferre :
> Remove legacy support for at91sam9rl boards.
Typo, please read "at91sam9263 boards". Already corrected in the
at91-3.19-cleanup branch.
Sorry for the noise.
> This include board files removal plus all legacy code for non DT boards
> support.
> Use the Device Tree for running this board with newer kernels.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> arch/arm/configs/at91sam9263_defconfig | 151 ---
> arch/arm/mach-at91/Kconfig.non_dt | 21 -
> arch/arm/mach-at91/Makefile | 4 -
> arch/arm/mach-at91/at91sam9263.c | 399 --------
> arch/arm/mach-at91/at91sam9263_devices.c | 1538 ------------------------------
> arch/arm/mach-at91/board-sam9263ek.c | 493 ----------
> 6 files changed, 2606 deletions(-)
> delete mode 100644 arch/arm/configs/at91sam9263_defconfig
> delete mode 100644 arch/arm/mach-at91/at91sam9263_devices.c
> delete mode 100644 arch/arm/mach-at91/board-sam9263ek.c
>
> diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
> deleted file mode 100644
> index 8b671c977b81..000000000000
> --- a/arch/arm/configs/at91sam9263_defconfig
> +++ /dev/null
> @@ -1,151 +0,0 @@
> -# CONFIG_LOCALVERSION_AUTO is not set
> -# CONFIG_SWAP is not set
> -CONFIG_SYSVIPC=y
> -CONFIG_IKCONFIG=y
> -CONFIG_IKCONFIG_PROC=y
> -CONFIG_LOG_BUF_SHIFT=14
> -CONFIG_NAMESPACES=y
> -CONFIG_EMBEDDED=y
> -CONFIG_SLAB=y
> -CONFIG_MODULES=y
> -CONFIG_MODULE_UNLOAD=y
> -# CONFIG_BLK_DEV_BSG is not set
> -# CONFIG_IOSCHED_DEADLINE is not set
> -# CONFIG_IOSCHED_CFQ is not set
> -CONFIG_ARCH_AT91=y
> -CONFIG_ARCH_AT91SAM9263=y
> -CONFIG_MACH_AT91SAM9263EK=y
> -CONFIG_MTD_AT91_DATAFLASH_CARD=y
> -# CONFIG_ARM_THUMB is not set
> -CONFIG_AEABI=y
> -CONFIG_ZBOOT_ROM_TEXT=0x0
> -CONFIG_ZBOOT_ROM_BSS=0x0
> -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
> -CONFIG_AUTO_ZRELADDR=y
> -CONFIG_NET=y
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_NET_KEY=y
> -CONFIG_INET=y
> -CONFIG_IP_MULTICAST=y
> -CONFIG_IP_ADVANCED_ROUTER=y
> -CONFIG_IP_ROUTE_VERBOSE=y
> -CONFIG_IP_PNP=y
> -CONFIG_IP_PNP_DHCP=y
> -CONFIG_IP_PNP_BOOTP=y
> -CONFIG_IP_PNP_RARP=y
> -CONFIG_NET_IPIP=y
> -CONFIG_IP_MROUTE=y
> -CONFIG_IP_PIMSM_V1=y
> -CONFIG_IP_PIMSM_V2=y
> -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> -# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> -# CONFIG_INET_XFRM_MODE_BEET is not set
> -# CONFIG_INET_LRO is not set
> -# CONFIG_INET_DIAG is not set
> -CONFIG_IPV6=y
> -# CONFIG_WIRELESS is not set
> -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> -CONFIG_DEVTMPFS=y
> -CONFIG_DEVTMPFS_MOUNT=y
> -CONFIG_MTD=y
> -CONFIG_MTD_CMDLINE_PARTS=y
> -CONFIG_MTD_BLOCK=y
> -CONFIG_NFTL=y
> -CONFIG_NFTL_RW=y
> -CONFIG_MTD_DATAFLASH=y
> -CONFIG_MTD_BLOCK2MTD=y
> -CONFIG_MTD_NAND=y
> -CONFIG_MTD_NAND_ATMEL=y
> -CONFIG_MTD_UBI=y
> -CONFIG_MTD_UBI_GLUEBI=y
> -CONFIG_BLK_DEV_LOOP=y
> -CONFIG_BLK_DEV_RAM=y
> -CONFIG_BLK_DEV_RAM_SIZE=8192
> -CONFIG_ATMEL_TCLIB=y
> -CONFIG_SCSI=y
> -CONFIG_BLK_DEV_SD=y
> -CONFIG_NETDEVICES=y
> -CONFIG_MACB=y
> -CONFIG_SMSC_PHY=y
> -# CONFIG_WLAN is not set
> -CONFIG_INPUT_POLLDEV=m
> -# CONFIG_INPUT_MOUSEDEV is not set
> -CONFIG_INPUT_EVDEV=y
> -# CONFIG_KEYBOARD_ATKBD is not set
> -CONFIG_KEYBOARD_GPIO=y
> -# CONFIG_INPUT_MOUSE is not set
> -CONFIG_INPUT_TOUCHSCREEN=y
> -CONFIG_TOUCHSCREEN_ADS7846=y
> -# CONFIG_LEGACY_PTYS is not set
> -CONFIG_SERIAL_ATMEL=y
> -CONFIG_SERIAL_ATMEL_CONSOLE=y
> -CONFIG_HW_RANDOM=y
> -CONFIG_I2C=y
> -CONFIG_I2C_CHARDEV=y
> -CONFIG_I2C_GPIO=y
> -CONFIG_SPI=y
> -CONFIG_SPI_ATMEL=y
> -CONFIG_GPIO_SYSFS=y
> -CONFIG_POWER_SUPPLY=y
> -CONFIG_POWER_RESET=y
> -# CONFIG_HWMON is not set
> -CONFIG_WATCHDOG=y
> -CONFIG_WATCHDOG_NOWAYOUT=y
> -CONFIG_AT91SAM9X_WATCHDOG=y
> -CONFIG_FB=y
> -CONFIG_FB_ATMEL=y
> -CONFIG_BACKLIGHT_LCD_SUPPORT=y
> -CONFIG_LCD_CLASS_DEVICE=y
> -CONFIG_BACKLIGHT_CLASS_DEVICE=y
> -CONFIG_FRAMEBUFFER_CONSOLE=y
> -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> -CONFIG_LOGO=y
> -CONFIG_SOUND=y
> -CONFIG_SND=y
> -CONFIG_SND_SEQUENCER=y
> -CONFIG_SND_MIXER_OSS=y
> -CONFIG_SND_PCM_OSS=y
> -# CONFIG_SND_SUPPORT_OLD_API is not set
> -# CONFIG_SND_VERBOSE_PROCFS is not set
> -# CONFIG_SND_DRIVERS is not set
> -# CONFIG_SND_ARM is not set
> -CONFIG_SND_ATMEL_AC97C=y
> -# CONFIG_SND_SPI is not set
> -CONFIG_SND_USB_AUDIO=m
> -CONFIG_USB=y
> -CONFIG_USB_MON=y
> -CONFIG_USB_OHCI_HCD=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_USB_GADGET=y
> -CONFIG_USB_ATMEL_USBA=y
> -CONFIG_USB_G_SERIAL=y
> -CONFIG_MMC=y
> -CONFIG_SDIO_UART=m
> -CONFIG_MMC_ATMELMCI=m
> -CONFIG_NEW_LEDS=y
> -CONFIG_LEDS_CLASS=y
> -CONFIG_LEDS_GPIO=y
> -CONFIG_LEDS_PWM=y
> -CONFIG_LEDS_TRIGGERS=y
> -CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> -CONFIG_RTC_CLASS=y
> -CONFIG_RTC_DRV_AT91SAM9=y
> -CONFIG_PWM=y
> -CONFIG_PWM_ATMEL=y
> -CONFIG_EXT4_FS=y
> -CONFIG_VFAT_FS=y
> -CONFIG_TMPFS=y
> -CONFIG_UBIFS_FS=y
> -CONFIG_UBIFS_FS_ADVANCED_COMPR=y
> -CONFIG_NFS_FS=y
> -CONFIG_NFS_V3_ACL=y
> -CONFIG_NFS_V4=y
> -CONFIG_ROOT_NFS=y
> -CONFIG_NLS_CODEPAGE_437=y
> -CONFIG_NLS_CODEPAGE_850=y
> -CONFIG_NLS_ISO8859_1=y
> -CONFIG_NLS_UTF8=y
> -CONFIG_DEBUG_USER=y
> -CONFIG_XZ_DEC=y
> -CONFIG_FONTS=y
> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index 22963a829e5c..a9458234ab23 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -27,12 +27,6 @@ config ARCH_AT91SAM9261
> select AT91_USE_OLD_CLK
> select OLD_IRQ_AT91
>
> -config ARCH_AT91SAM9263
> - bool "AT91SAM9263"
> - select SOC_AT91SAM9263
> - select AT91_USE_OLD_CLK
> - select OLD_IRQ_AT91
> -
> endchoice
>
> config ARCH_AT91SAM9G20
> @@ -260,21 +254,6 @@ endif
>
> # ----------------------------------------------------------
>
> -if ARCH_AT91SAM9263
> -
> -comment "AT91SAM9263 Board Type"
> -
> -config MACH_AT91SAM9263EK
> - bool "Atmel AT91SAM9263-EK Evaluation Kit"
> - select HAVE_AT91_DATAFLASH_CARD
> - help
> - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
> - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
> -
> -endif
> -
> -# ----------------------------------------------------------
> -
> comment "AT91 Board Options"
>
> config MTD_AT91_DATAFLASH_CARD
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index ae8aa1a898e8..e0361357e018 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -23,7 +23,6 @@ obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
> obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
> obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
> obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
> -obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
>
> # AT91RM9200 board-specific support
> obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
> @@ -52,9 +51,6 @@ obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o
> obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
> obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
>
> -# AT91SAM9263 board-specific support
> -obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
> -
> # AT91SAM9G20 board-specific support
> obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
> obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
> diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
> index fbff228cc63e..e7ad14864083 100644
> --- a/arch/arm/mach-at91/at91sam9263.c
> +++ b/arch/arm/mach-at91/at91sam9263.c
> @@ -10,304 +10,11 @@
> *
> */
>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/clk/at91_pmc.h>
> -
> -#include <asm/proc-fns.h>
> -#include <asm/irq.h>
> -#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> #include <asm/system_misc.h>
> -#include <mach/at91sam9263.h>
> #include <mach/hardware.h>
>
> -#include "at91_aic.h"
> #include "soc.h"
> #include "generic.h"
> -#include "sam9_smc.h"
> -#include "pm.h"
> -
> -#if defined(CONFIG_OLD_CLK_AT91)
> -#include "clock.h"
> -/* --------------------------------------------------------------------
> - * Clocks
> - * -------------------------------------------------------------------- */
> -
> -/*
> - * The peripheral clocks.
> - */
> -static struct clk pioA_clk = {
> - .name = "pioA_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk pioB_clk = {
> - .name = "pioB_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk pioCDE_clk = {
> - .name = "pioCDE_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk usart0_clk = {
> - .name = "usart0_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_US0,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk usart1_clk = {
> - .name = "usart1_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_US1,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk usart2_clk = {
> - .name = "usart2_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_US2,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk mmc0_clk = {
> - .name = "mci0_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk mmc1_clk = {
> - .name = "mci1_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk can_clk = {
> - .name = "can_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_CAN,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk twi_clk = {
> - .name = "twi_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_TWI,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk spi0_clk = {
> - .name = "spi0_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk spi1_clk = {
> - .name = "spi1_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk ssc0_clk = {
> - .name = "ssc0_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_SSC0,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk ssc1_clk = {
> - .name = "ssc1_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_SSC1,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk ac97_clk = {
> - .name = "ac97_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_AC97C,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk tcb_clk = {
> - .name = "tcb_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_TCB,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk pwm_clk = {
> - .name = "pwm_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_PWMC,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk macb_clk = {
> - .name = "pclk",
> - .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk dma_clk = {
> - .name = "dma_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_DMA,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk twodge_clk = {
> - .name = "2dge_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_2DGE,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk udc_clk = {
> - .name = "udc_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_UDP,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk isi_clk = {
> - .name = "isi_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_ISI,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk lcdc_clk = {
> - .name = "lcdc_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_LCDC,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -static struct clk ohci_clk = {
> - .name = "ohci_clk",
> - .pmc_mask = 1 << AT91SAM9263_ID_UHP,
> - .type = CLK_TYPE_PERIPHERAL,
> -};
> -
> -static struct clk *periph_clocks[] __initdata = {
> - &pioA_clk,
> - &pioB_clk,
> - &pioCDE_clk,
> - &usart0_clk,
> - &usart1_clk,
> - &usart2_clk,
> - &mmc0_clk,
> - &mmc1_clk,
> - &can_clk,
> - &twi_clk,
> - &spi0_clk,
> - &spi1_clk,
> - &ssc0_clk,
> - &ssc1_clk,
> - &ac97_clk,
> - &tcb_clk,
> - &pwm_clk,
> - &macb_clk,
> - &twodge_clk,
> - &udc_clk,
> - &isi_clk,
> - &lcdc_clk,
> - &dma_clk,
> - &ohci_clk,
> - // irq0 .. irq1
> -};
> -
> -static struct clk_lookup periph_clocks_lookups[] = {
> - /* One additional fake clock for macb_hclk */
> - CLKDEV_CON_ID("hclk", &macb_clk),
> - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
> - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
> - CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
> - CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
> - CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk),
> - CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
> - CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
> - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
> - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
> - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
> - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
> - CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
> - /* fake hclk clock */
> - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
> - CLKDEV_CON_ID("pioA", &pioA_clk),
> - CLKDEV_CON_ID("pioB", &pioB_clk),
> - CLKDEV_CON_ID("pioC", &pioCDE_clk),
> - CLKDEV_CON_ID("pioD", &pioCDE_clk),
> - CLKDEV_CON_ID("pioE", &pioCDE_clk),
> - /* more usart lookup table for DT entries */
> - CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
> - CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
> - CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
> - CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
> - /* more tc lookup table for DT entries */
> - CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk),
> - CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
> - CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
> - CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
> - CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
> - CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk),
> - CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk),
> - CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
> - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
> - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk),
> - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk),
> - CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk),
> - CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
> -};
> -
> -static struct clk_lookup usart_clocks_lookups[] = {
> - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
> - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
> - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
> - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
> -};
> -
> -/*
> - * The four programmable clocks.
> - * You must configure pin multiplexing to bring these signals out.
> - */
> -static struct clk pck0 = {
> - .name = "pck0",
> - .pmc_mask = AT91_PMC_PCK0,
> - .type = CLK_TYPE_PROGRAMMABLE,
> - .id = 0,
> -};
> -static struct clk pck1 = {
> - .name = "pck1",
> - .pmc_mask = AT91_PMC_PCK1,
> - .type = CLK_TYPE_PROGRAMMABLE,
> - .id = 1,
> -};
> -static struct clk pck2 = {
> - .name = "pck2",
> - .pmc_mask = AT91_PMC_PCK2,
> - .type = CLK_TYPE_PROGRAMMABLE,
> - .id = 2,
> -};
> -static struct clk pck3 = {
> - .name = "pck3",
> - .pmc_mask = AT91_PMC_PCK3,
> - .type = CLK_TYPE_PROGRAMMABLE,
> - .id = 3,
> -};
> -
> -static void __init at91sam9263_register_clocks(void)
> -{
> - int i;
> -
> - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
> - clk_register(periph_clocks[i]);
> -
> - clkdev_add_table(periph_clocks_lookups,
> - ARRAY_SIZE(periph_clocks_lookups));
> - clkdev_add_table(usart_clocks_lookups,
> - ARRAY_SIZE(usart_clocks_lookups));
> -
> - clk_register(&pck0);
> - clk_register(&pck1);
> - clk_register(&pck2);
> - clk_register(&pck3);
> -}
> -#else
> -#define at91sam9263_register_clocks NULL
> -#endif
> -
> -/* --------------------------------------------------------------------
> - * GPIO
> - * -------------------------------------------------------------------- */
> -
> -static struct at91_gpio_bank at91sam9263_gpio[] __initdata = {
> - {
> - .id = AT91SAM9263_ID_PIOA,
> - .regbase = AT91SAM9263_BASE_PIOA,
> - }, {
> - .id = AT91SAM9263_ID_PIOB,
> - .regbase = AT91SAM9263_BASE_PIOB,
> - }, {
> - .id = AT91SAM9263_ID_PIOCDE,
> - .regbase = AT91SAM9263_BASE_PIOC,
> - }, {
> - .id = AT91SAM9263_ID_PIOCDE,
> - .regbase = AT91SAM9263_BASE_PIOD,
> - }, {
> - .id = AT91SAM9263_ID_PIOCDE,
> - .regbase = AT91SAM9263_BASE_PIOE,
> - }
> -};
>
> /* --------------------------------------------------------------------
> * AT91SAM9263 processor initialization
> @@ -319,121 +26,15 @@ static void __init at91sam9263_map_io(void)
> at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE);
> }
>
> -static void __init at91sam9263_ioremap_registers(void)
> -{
> - at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512);
> - at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512);
> - at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
> - at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
> - at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
> - at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX);
> - at91_pm_set_standby(at91sam9_sdram_standby);
> -}
> -
> static void __init at91sam9263_initialize(void)
> {
> arm_pm_idle = at91sam9_idle;
>
> at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0);
> at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1);
> -
> - /* Register GPIO subsystem */
> - at91_gpio_init(at91sam9263_gpio, 5);
> -}
> -
> -static struct resource rstc_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_RSTC,
> - .end = AT91SAM9263_BASE_RSTC + SZ_16 - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = AT91SAM9263_BASE_SDRAMC0,
> - .end = AT91SAM9263_BASE_SDRAMC0 + SZ_512 - 1,
> - .flags = IORESOURCE_MEM,
> - },
> -};
> -
> -static struct platform_device rstc_device = {
> - .name = "at91-sam9260-reset",
> - .resource = rstc_resources,
> - .num_resources = ARRAY_SIZE(rstc_resources),
> -};
> -
> -static struct resource shdwc_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_SHDWC,
> - .end = AT91SAM9263_BASE_SHDWC + SZ_16 - 1,
> - .flags = IORESOURCE_MEM,
> - },
> -};
> -
> -static struct platform_device shdwc_device = {
> - .name = "at91-poweroff",
> - .resource = shdwc_resources,
> - .num_resources = ARRAY_SIZE(shdwc_resources),
> -};
> -
> -static void __init at91sam9263_register_devices(void)
> -{
> - platform_device_register(&rstc_device);
> - platform_device_register(&shdwc_device);
> -}
> -
> -/* --------------------------------------------------------------------
> - * Interrupt initialization
> - * -------------------------------------------------------------------- */
> -
> -/*
> - * The default interrupt priority levels (0 = lowest, 7 = highest).
> - */
> -static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
> - 7, /* Advanced Interrupt Controller (FIQ) */
> - 7, /* System Peripherals */
> - 1, /* Parallel IO Controller A */
> - 1, /* Parallel IO Controller B */
> - 1, /* Parallel IO Controller C, D and E */
> - 0,
> - 0,
> - 5, /* USART 0 */
> - 5, /* USART 1 */
> - 5, /* USART 2 */
> - 0, /* Multimedia Card Interface 0 */
> - 0, /* Multimedia Card Interface 1 */
> - 3, /* CAN */
> - 6, /* Two-Wire Interface */
> - 5, /* Serial Peripheral Interface 0 */
> - 5, /* Serial Peripheral Interface 1 */
> - 4, /* Serial Synchronous Controller 0 */
> - 4, /* Serial Synchronous Controller 1 */
> - 5, /* AC97 Controller */
> - 0, /* Timer Counter 0, 1 and 2 */
> - 0, /* Pulse Width Modulation Controller */
> - 3, /* Ethernet */
> - 0,
> - 0, /* 2D Graphic Engine */
> - 2, /* USB Device Port */
> - 0, /* Image Sensor Interface */
> - 3, /* LDC Controller */
> - 0, /* DMA Controller */
> - 0,
> - 2, /* USB Host port */
> - 0, /* Advanced Interrupt Controller (IRQ0) */
> - 0, /* Advanced Interrupt Controller (IRQ1) */
> -};
> -
> -static void __init at91sam9263_init_time(void)
> -{
> - at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
> }
>
> AT91_SOC_START(at91sam9263)
> .map_io = at91sam9263_map_io,
> - .default_irq_priority = at91sam9263_default_irq_priority,
> - .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1),
> - .ioremap_registers = at91sam9263_ioremap_registers,
> - .register_clocks = at91sam9263_register_clocks,
> - .register_devices = at91sam9263_register_devices,
> .init = at91sam9263_initialize,
> - .init_time = at91sam9263_init_time,
> AT91_SOC_END
> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
> deleted file mode 100644
> index cef0e2f57068..000000000000
> --- a/arch/arm/mach-at91/at91sam9263_devices.c
> +++ /dev/null
> @@ -1,1538 +0,0 @@
> -/*
> - * arch/arm/mach-at91/at91sam9263_devices.c
> - *
> - * Copyright (C) 2007 Atmel Corporation.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - */
> -#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -
> -#include <linux/dma-mapping.h>
> -#include <linux/gpio.h>
> -#include <linux/platform_device.h>
> -#include <linux/i2c-gpio.h>
> -
> -#include <linux/fb.h>
> -#include <video/atmel_lcdc.h>
> -
> -#include <mach/at91sam9263.h>
> -#include <mach/at91sam9263_matrix.h>
> -#include <mach/at91_matrix.h>
> -#include <mach/at91sam9_smc.h>
> -#include <mach/hardware.h>
> -
> -#include "board.h"
> -#include "generic.h"
> -#include "gpio.h"
> -
> -
> -/* --------------------------------------------------------------------
> - * USB Host
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
> -static u64 ohci_dmamask = DMA_BIT_MASK(32);
> -static struct at91_usbh_data usbh_data;
> -
> -static struct resource usbh_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_UHP_BASE,
> - .end = AT91SAM9263_UHP_BASE + SZ_1M - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91_usbh_device = {
> - .name = "at91_ohci",
> - .id = -1,
> - .dev = {
> - .dma_mask = &ohci_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = &usbh_data,
> - },
> - .resource = usbh_resources,
> - .num_resources = ARRAY_SIZE(usbh_resources),
> -};
> -
> -void __init at91_add_device_usbh(struct at91_usbh_data *data)
> -{
> - int i;
> -
> - if (!data)
> - return;
> -
> - /* Enable VBus control for UHP ports */
> - for (i = 0; i < data->ports; i++) {
> - if (gpio_is_valid(data->vbus_pin[i]))
> - at91_set_gpio_output(data->vbus_pin[i],
> - data->vbus_pin_active_low[i]);
> - }
> -
> - /* Enable overcurrent notification */
> - for (i = 0; i < data->ports; i++) {
> - if (gpio_is_valid(data->overcurrent_pin[i]))
> - at91_set_gpio_input(data->overcurrent_pin[i], 1);
> - }
> -
> - usbh_data = *data;
> - platform_device_register(&at91_usbh_device);
> -}
> -#else
> -void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * USB Device (Gadget)
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
> -static struct at91_udc_data udc_data;
> -
> -static struct resource udc_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_UDP,
> - .end = AT91SAM9263_BASE_UDP + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91_udc_device = {
> - .name = "at91_udc",
> - .id = -1,
> - .dev = {
> - .platform_data = &udc_data,
> - },
> - .resource = udc_resources,
> - .num_resources = ARRAY_SIZE(udc_resources),
> -};
> -
> -void __init at91_add_device_udc(struct at91_udc_data *data)
> -{
> - if (!data)
> - return;
> -
> - if (gpio_is_valid(data->vbus_pin)) {
> - at91_set_gpio_input(data->vbus_pin, 0);
> - at91_set_deglitch(data->vbus_pin, 1);
> - }
> -
> - /* Pullup pin is handled internally by USB device peripheral */
> -
> - udc_data = *data;
> - platform_device_register(&at91_udc_device);
> -}
> -#else
> -void __init at91_add_device_udc(struct at91_udc_data *data) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * Ethernet
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
> -static u64 eth_dmamask = DMA_BIT_MASK(32);
> -static struct macb_platform_data eth_data;
> -
> -static struct resource eth_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_EMAC,
> - .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_eth_device = {
> - .name = "macb",
> - .id = -1,
> - .dev = {
> - .dma_mask = ð_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = ð_data,
> - },
> - .resource = eth_resources,
> - .num_resources = ARRAY_SIZE(eth_resources),
> -};
> -
> -void __init at91_add_device_eth(struct macb_platform_data *data)
> -{
> - if (!data)
> - return;
> -
> - if (gpio_is_valid(data->phy_irq_pin)) {
> - at91_set_gpio_input(data->phy_irq_pin, 0);
> - at91_set_deglitch(data->phy_irq_pin, 1);
> - }
> -
> - /* Pins used for MII and RMII */
> - at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
> - at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
> - at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
> - at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
> - at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
> - at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
> - at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
> - at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
> - at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
> - at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
> -
> - if (!data->is_rmii) {
> - at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
> - at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
> - at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
> - at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
> - at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
> - at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
> - at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
> - at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
> - }
> -
> - eth_data = *data;
> - platform_device_register(&at91sam9263_eth_device);
> -}
> -#else
> -void __init at91_add_device_eth(struct macb_platform_data *data) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * MMC / SD
> - * -------------------------------------------------------------------- */
> -
> -#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
> -static u64 mmc_dmamask = DMA_BIT_MASK(32);
> -static struct mci_platform_data mmc0_data, mmc1_data;
> -
> -static struct resource mmc0_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_MCI0,
> - .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_mmc0_device = {
> - .name = "atmel_mci",
> - .id = 0,
> - .dev = {
> - .dma_mask = &mmc_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = &mmc0_data,
> - },
> - .resource = mmc0_resources,
> - .num_resources = ARRAY_SIZE(mmc0_resources),
> -};
> -
> -static struct resource mmc1_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_MCI1,
> - .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_mmc1_device = {
> - .name = "atmel_mci",
> - .id = 1,
> - .dev = {
> - .dma_mask = &mmc_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = &mmc1_data,
> - },
> - .resource = mmc1_resources,
> - .num_resources = ARRAY_SIZE(mmc1_resources),
> -};
> -
> -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
> -{
> - unsigned int i;
> - unsigned int slot_count = 0;
> -
> - if (!data)
> - return;
> -
> - for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
> -
> - if (!data->slot[i].bus_width)
> - continue;
> -
> - /* input/irq */
> - if (gpio_is_valid(data->slot[i].detect_pin)) {
> - at91_set_gpio_input(data->slot[i].detect_pin,
> - 1);
> - at91_set_deglitch(data->slot[i].detect_pin,
> - 1);
> - }
> - if (gpio_is_valid(data->slot[i].wp_pin))
> - at91_set_gpio_input(data->slot[i].wp_pin, 1);
> -
> - if (mmc_id == 0) { /* MCI0 */
> - switch (i) {
> - case 0: /* slot A */
> - /* CMD */
> - at91_set_A_periph(AT91_PIN_PA1, 1);
> - /* DAT0, maybe DAT1..DAT3 */
> - at91_set_A_periph(AT91_PIN_PA0, 1);
> - if (data->slot[i].bus_width == 4) {
> - at91_set_A_periph(AT91_PIN_PA3, 1);
> - at91_set_A_periph(AT91_PIN_PA4, 1);
> - at91_set_A_periph(AT91_PIN_PA5, 1);
> - }
> - slot_count++;
> - break;
> - case 1: /* slot B */
> - /* CMD */
> - at91_set_A_periph(AT91_PIN_PA16, 1);
> - /* DAT0, maybe DAT1..DAT3 */
> - at91_set_A_periph(AT91_PIN_PA17, 1);
> - if (data->slot[i].bus_width == 4) {
> - at91_set_A_periph(AT91_PIN_PA18, 1);
> - at91_set_A_periph(AT91_PIN_PA19, 1);
> - at91_set_A_periph(AT91_PIN_PA20, 1);
> - }
> - slot_count++;
> - break;
> - default:
> - printk(KERN_ERR
> - "AT91: SD/MMC slot %d not available\n", i);
> - break;
> - }
> - if (slot_count) {
> - /* CLK */
> - at91_set_A_periph(AT91_PIN_PA12, 0);
> -
> - mmc0_data = *data;
> - platform_device_register(&at91sam9263_mmc0_device);
> - }
> - } else if (mmc_id == 1) { /* MCI1 */
> - switch (i) {
> - case 0: /* slot A */
> - /* CMD */
> - at91_set_A_periph(AT91_PIN_PA7, 1);
> - /* DAT0, maybe DAT1..DAT3 */
> - at91_set_A_periph(AT91_PIN_PA8, 1);
> - if (data->slot[i].bus_width == 4) {
> - at91_set_A_periph(AT91_PIN_PA9, 1);
> - at91_set_A_periph(AT91_PIN_PA10, 1);
> - at91_set_A_periph(AT91_PIN_PA11, 1);
> - }
> - slot_count++;
> - break;
> - case 1: /* slot B */
> - /* CMD */
> - at91_set_A_periph(AT91_PIN_PA21, 1);
> - /* DAT0, maybe DAT1..DAT3 */
> - at91_set_A_periph(AT91_PIN_PA22, 1);
> - if (data->slot[i].bus_width == 4) {
> - at91_set_A_periph(AT91_PIN_PA23, 1);
> - at91_set_A_periph(AT91_PIN_PA24, 1);
> - at91_set_A_periph(AT91_PIN_PA25, 1);
> - }
> - slot_count++;
> - break;
> - default:
> - printk(KERN_ERR
> - "AT91: SD/MMC slot %d not available\n", i);
> - break;
> - }
> - if (slot_count) {
> - /* CLK */
> - at91_set_A_periph(AT91_PIN_PA6, 0);
> -
> - mmc1_data = *data;
> - platform_device_register(&at91sam9263_mmc1_device);
> - }
> - }
> - }
> -}
> -#else
> -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
> -#endif
> -
> -/* --------------------------------------------------------------------
> - * Compact Flash (PCMCIA or IDE)
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
> - defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
> -
> -static struct at91_cf_data cf0_data;
> -
> -static struct resource cf0_resources[] = {
> - [0] = {
> - .start = AT91_CHIPSELECT_4,
> - .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
> - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
> - }
> -};
> -
> -static struct platform_device cf0_device = {
> - .id = 0,
> - .dev = {
> - .platform_data = &cf0_data,
> - },
> - .resource = cf0_resources,
> - .num_resources = ARRAY_SIZE(cf0_resources),
> -};
> -
> -static struct at91_cf_data cf1_data;
> -
> -static struct resource cf1_resources[] = {
> - [0] = {
> - .start = AT91_CHIPSELECT_5,
> - .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
> - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
> - }
> -};
> -
> -static struct platform_device cf1_device = {
> - .id = 1,
> - .dev = {
> - .platform_data = &cf1_data,
> - },
> - .resource = cf1_resources,
> - .num_resources = ARRAY_SIZE(cf1_resources),
> -};
> -
> -void __init at91_add_device_cf(struct at91_cf_data *data)
> -{
> - unsigned long ebi0_csa;
> - struct platform_device *pdev;
> -
> - if (!data)
> - return;
> -
> - /*
> - * assign CS4 or CS5 to SMC with Compact Flash logic support,
> - * we assume SMC timings are configured by board code,
> - * except True IDE where timings are controlled by driver
> - */
> - ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
> - switch (data->chipselect) {
> - case 4:
> - at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */
> - ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
> - cf0_data = *data;
> - pdev = &cf0_device;
> - break;
> - case 5:
> - at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */
> - ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
> - cf1_data = *data;
> - pdev = &cf1_device;
> - break;
> - default:
> - printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
> - data->chipselect);
> - return;
> - }
> - at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
> -
> - if (gpio_is_valid(data->det_pin)) {
> - at91_set_gpio_input(data->det_pin, 1);
> - at91_set_deglitch(data->det_pin, 1);
> - }
> -
> - if (gpio_is_valid(data->irq_pin)) {
> - at91_set_gpio_input(data->irq_pin, 1);
> - at91_set_deglitch(data->irq_pin, 1);
> - }
> -
> - if (gpio_is_valid(data->vcc_pin))
> - /* initially off */
> - at91_set_gpio_output(data->vcc_pin, 0);
> -
> - /* enable EBI controlled pins */
> - at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */
> - at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */
> - at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
> - at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
> -
> - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
> - platform_device_register(pdev);
> -}
> -#else
> -void __init at91_add_device_cf(struct at91_cf_data *data) {}
> -#endif
> -
> -/* --------------------------------------------------------------------
> - * NAND / SmartMedia
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
> -static struct atmel_nand_data nand_data;
> -
> -#define NAND_BASE AT91_CHIPSELECT_3
> -
> -static struct resource nand_resources[] = {
> - [0] = {
> - .start = NAND_BASE,
> - .end = NAND_BASE + SZ_256M - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = AT91SAM9263_BASE_ECC0,
> - .end = AT91SAM9263_BASE_ECC0 + SZ_512 - 1,
> - .flags = IORESOURCE_MEM,
> - }
> -};
> -
> -static struct platform_device at91sam9263_nand_device = {
> - .name = "atmel_nand",
> - .id = -1,
> - .dev = {
> - .platform_data = &nand_data,
> - },
> - .resource = nand_resources,
> - .num_resources = ARRAY_SIZE(nand_resources),
> -};
> -
> -void __init at91_add_device_nand(struct atmel_nand_data *data)
> -{
> - unsigned long csa;
> -
> - if (!data)
> - return;
> -
> - csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
> - at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
> -
> - /* enable pin */
> - if (gpio_is_valid(data->enable_pin))
> - at91_set_gpio_output(data->enable_pin, 1);
> -
> - /* ready/busy pin */
> - if (gpio_is_valid(data->rdy_pin))
> - at91_set_gpio_input(data->rdy_pin, 1);
> -
> - /* card detect pin */
> - if (gpio_is_valid(data->det_pin))
> - at91_set_gpio_input(data->det_pin, 1);
> -
> - nand_data = *data;
> - platform_device_register(&at91sam9263_nand_device);
> -}
> -#else
> -void __init at91_add_device_nand(struct atmel_nand_data *data) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * TWI (i2c)
> - * -------------------------------------------------------------------- */
> -
> -/*
> - * Prefer the GPIO code since the TWI controller isn't robust
> - * (gets overruns and underruns under load) and can only issue
> - * repeated STARTs in one scenario (the driver doesn't yet handle them).
> - */
> -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
> -
> -static struct i2c_gpio_platform_data pdata = {
> - .sda_pin = AT91_PIN_PB4,
> - .sda_is_open_drain = 1,
> - .scl_pin = AT91_PIN_PB5,
> - .scl_is_open_drain = 1,
> - .udelay = 2, /* ~100 kHz */
> -};
> -
> -static struct platform_device at91sam9263_twi_device = {
> - .name = "i2c-gpio",
> - .id = 0,
> - .dev.platform_data = &pdata,
> -};
> -
> -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
> -{
> - at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
> - at91_set_multi_drive(AT91_PIN_PB4, 1);
> -
> - at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
> - at91_set_multi_drive(AT91_PIN_PB5, 1);
> -
> - i2c_register_board_info(0, devices, nr_devices);
> - platform_device_register(&at91sam9263_twi_device);
> -}
> -
> -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
> -
> -static struct resource twi_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_TWI,
> - .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_twi_device = {
> - .name = "i2c-at91sam9260",
> - .id = 0,
> - .resource = twi_resources,
> - .num_resources = ARRAY_SIZE(twi_resources),
> -};
> -
> -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
> -{
> - /* pins used for TWI interface */
> - at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
> - at91_set_multi_drive(AT91_PIN_PB4, 1);
> -
> - at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
> - at91_set_multi_drive(AT91_PIN_PB5, 1);
> -
> - i2c_register_board_info(0, devices, nr_devices);
> - platform_device_register(&at91sam9263_twi_device);
> -}
> -#else
> -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * SPI
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
> -static u64 spi_dmamask = DMA_BIT_MASK(32);
> -
> -static struct resource spi0_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_SPI0,
> - .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_spi0_device = {
> - .name = "atmel_spi",
> - .id = 0,
> - .dev = {
> - .dma_mask = &spi_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - },
> - .resource = spi0_resources,
> - .num_resources = ARRAY_SIZE(spi0_resources),
> -};
> -
> -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
> -
> -static struct resource spi1_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_SPI1,
> - .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_spi1_device = {
> - .name = "atmel_spi",
> - .id = 1,
> - .dev = {
> - .dma_mask = &spi_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - },
> - .resource = spi1_resources,
> - .num_resources = ARRAY_SIZE(spi1_resources),
> -};
> -
> -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
> -
> -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
> -{
> - int i;
> - unsigned long cs_pin;
> - short enable_spi0 = 0;
> - short enable_spi1 = 0;
> -
> - /* Choose SPI chip-selects */
> - for (i = 0; i < nr_devices; i++) {
> - if (devices[i].controller_data)
> - cs_pin = (unsigned long) devices[i].controller_data;
> - else if (devices[i].bus_num == 0)
> - cs_pin = spi0_standard_cs[devices[i].chip_select];
> - else
> - cs_pin = spi1_standard_cs[devices[i].chip_select];
> -
> - if (!gpio_is_valid(cs_pin))
> - continue;
> -
> - if (devices[i].bus_num == 0)
> - enable_spi0 = 1;
> - else
> - enable_spi1 = 1;
> -
> - /* enable chip-select pin */
> - at91_set_gpio_output(cs_pin, 1);
> -
> - /* pass chip-select pin to driver */
> - devices[i].controller_data = (void *) cs_pin;
> - }
> -
> - spi_register_board_info(devices, nr_devices);
> -
> - /* Configure SPI bus(es) */
> - if (enable_spi0) {
> - at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
> - at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
> - at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
> -
> - platform_device_register(&at91sam9263_spi0_device);
> - }
> - if (enable_spi1) {
> - at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
> - at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
> - at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
> -
> - platform_device_register(&at91sam9263_spi1_device);
> - }
> -}
> -#else
> -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * AC97
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
> -static u64 ac97_dmamask = DMA_BIT_MASK(32);
> -static struct ac97c_platform_data ac97_data;
> -
> -static struct resource ac97_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_AC97C,
> - .end = AT91SAM9263_BASE_AC97C + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_ac97_device = {
> - .name = "atmel_ac97c",
> - .id = 0,
> - .dev = {
> - .dma_mask = &ac97_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = &ac97_data,
> - },
> - .resource = ac97_resources,
> - .num_resources = ARRAY_SIZE(ac97_resources),
> -};
> -
> -void __init at91_add_device_ac97(struct ac97c_platform_data *data)
> -{
> - if (!data)
> - return;
> -
> - at91_set_A_periph(AT91_PIN_PB0, 0); /* AC97FS */
> - at91_set_A_periph(AT91_PIN_PB1, 0); /* AC97CK */
> - at91_set_A_periph(AT91_PIN_PB2, 0); /* AC97TX */
> - at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */
> -
> - /* reset */
> - if (gpio_is_valid(data->reset_pin))
> - at91_set_gpio_output(data->reset_pin, 0);
> -
> - ac97_data = *data;
> - platform_device_register(&at91sam9263_ac97_device);
> -}
> -#else
> -void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
> -#endif
> -
> -/* --------------------------------------------------------------------
> - * CAN Controller
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
> -static struct resource can_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_CAN,
> - .end = AT91SAM9263_BASE_CAN + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_can_device = {
> - .name = "at91_can",
> - .id = -1,
> - .resource = can_resources,
> - .num_resources = ARRAY_SIZE(can_resources),
> -};
> -
> -void __init at91_add_device_can(struct at91_can_data *data)
> -{
> - at91_set_A_periph(AT91_PIN_PA13, 0); /* CANTX */
> - at91_set_A_periph(AT91_PIN_PA14, 0); /* CANRX */
> - at91sam9263_can_device.dev.platform_data = data;
> -
> - platform_device_register(&at91sam9263_can_device);
> -}
> -#else
> -void __init at91_add_device_can(struct at91_can_data *data) {}
> -#endif
> -
> -/* --------------------------------------------------------------------
> - * LCD Controller
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
> -static u64 lcdc_dmamask = DMA_BIT_MASK(32);
> -static struct atmel_lcdfb_pdata lcdc_data;
> -
> -static struct resource lcdc_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_LCDC_BASE,
> - .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91_lcdc_device = {
> - .name = "at91sam9263-lcdfb",
> - .id = 0,
> - .dev = {
> - .dma_mask = &lcdc_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = &lcdc_data,
> - },
> - .resource = lcdc_resources,
> - .num_resources = ARRAY_SIZE(lcdc_resources),
> -};
> -
> -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
> -{
> - if (!data)
> - return;
> -
> - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
> - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
> - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
> - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
> - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
> - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
> - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
> - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
> - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
> - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
> - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
> - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
> - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
> - at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
> - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
> - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
> - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
> - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
> - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
> - at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
> - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
> - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
> -
> - lcdc_data = *data;
> - platform_device_register(&at91_lcdc_device);
> -}
> -#else
> -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * Image Sensor Interface
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
> -
> -struct resource isi_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_ISI,
> - .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_isi_device = {
> - .name = "at91_isi",
> - .id = -1,
> - .resource = isi_resources,
> - .num_resources = ARRAY_SIZE(isi_resources),
> -};
> -
> -void __init at91_add_device_isi(struct isi_platform_data *data,
> - bool use_pck_as_mck)
> -{
> - at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
> - at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
> - at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
> - at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
> - at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
> - at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
> - at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
> - at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
> - at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
> - at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
> - at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
> - at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
> - at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
> - at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
> - at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
> -
> - if (use_pck_as_mck) {
> - at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
> -
> - /* TODO: register the PCK for ISI_MCK and set its parent */
> - }
> -}
> -#else
> -void __init at91_add_device_isi(struct isi_platform_data *data,
> - bool use_pck_as_mck) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * Timer/Counter block
> - * -------------------------------------------------------------------- */
> -
> -#ifdef CONFIG_ATMEL_TCLIB
> -
> -static struct resource tcb_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_TCB0,
> - .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_tcb_device = {
> - .name = "atmel_tcb",
> - .id = 0,
> - .resource = tcb_resources,
> - .num_resources = ARRAY_SIZE(tcb_resources),
> -};
> -
> -#if defined(CONFIG_OF)
> -static struct of_device_id tcb_ids[] = {
> - { .compatible = "atmel,at91rm9200-tcb" },
> - { /*sentinel*/ }
> -};
> -#endif
> -
> -static void __init at91_add_device_tc(void)
> -{
> -#if defined(CONFIG_OF)
> - struct device_node *np;
> -
> - np = of_find_matching_node(NULL, tcb_ids);
> - if (np) {
> - of_node_put(np);
> - return;
> - }
> -#endif
> -
> - platform_device_register(&at91sam9263_tcb_device);
> -}
> -#else
> -static void __init at91_add_device_tc(void) { }
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * RTT
> - * -------------------------------------------------------------------- */
> -
> -static struct resource rtt0_resources[] = {
> - {
> - .start = AT91SAM9263_BASE_RTT0,
> - .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
> - .flags = IORESOURCE_MEM,
> - }, {
> - .flags = IORESOURCE_MEM,
> - }, {
> - .flags = IORESOURCE_IRQ,
> - }
> -};
> -
> -static struct platform_device at91sam9263_rtt0_device = {
> - .name = "at91_rtt",
> - .id = 0,
> - .resource = rtt0_resources,
> -};
> -
> -static struct resource rtt1_resources[] = {
> - {
> - .start = AT91SAM9263_BASE_RTT1,
> - .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
> - .flags = IORESOURCE_MEM,
> - }, {
> - .flags = IORESOURCE_MEM,
> - }, {
> - .flags = IORESOURCE_IRQ,
> - }
> -};
> -
> -static struct platform_device at91sam9263_rtt1_device = {
> - .name = "at91_rtt",
> - .id = 1,
> - .resource = rtt1_resources,
> -};
> -
> -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
> -static void __init at91_add_device_rtt_rtc(void)
> -{
> - struct platform_device *pdev;
> - struct resource *r;
> -
> - switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
> - case 0:
> - /*
> - * The second resource is needed only for the chosen RTT:
> - * GPBR will serve as the storage for RTC time offset
> - */
> - at91sam9263_rtt0_device.num_resources = 3;
> - at91sam9263_rtt1_device.num_resources = 1;
> - pdev = &at91sam9263_rtt0_device;
> - r = rtt0_resources;
> - break;
> - case 1:
> - at91sam9263_rtt0_device.num_resources = 1;
> - at91sam9263_rtt1_device.num_resources = 3;
> - pdev = &at91sam9263_rtt1_device;
> - r = rtt1_resources;
> - break;
> - default:
> - pr_err("at91sam9263: only supports 2 RTT (%d)\n",
> - CONFIG_RTC_DRV_AT91SAM9_RTT);
> - return;
> - }
> -
> - pdev->name = "rtc-at91sam9";
> - r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
> - r[1].end = r[1].start + 3;
> - r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
> - r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
> -}
> -#else
> -static void __init at91_add_device_rtt_rtc(void)
> -{
> - /* Only one resource is needed: RTT not used as RTC */
> - at91sam9263_rtt0_device.num_resources = 1;
> - at91sam9263_rtt1_device.num_resources = 1;
> -}
> -#endif
> -
> -static void __init at91_add_device_rtt(void)
> -{
> - at91_add_device_rtt_rtc();
> - platform_device_register(&at91sam9263_rtt0_device);
> - platform_device_register(&at91sam9263_rtt1_device);
> -}
> -
> -
> -/* --------------------------------------------------------------------
> - * Watchdog
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
> -static struct resource wdt_resources[] = {
> - {
> - .start = AT91SAM9263_BASE_WDT,
> - .end = AT91SAM9263_BASE_WDT + SZ_16 - 1,
> - .flags = IORESOURCE_MEM,
> - }
> -};
> -
> -static struct platform_device at91sam9263_wdt_device = {
> - .name = "at91_wdt",
> - .id = -1,
> - .resource = wdt_resources,
> - .num_resources = ARRAY_SIZE(wdt_resources),
> -};
> -
> -static void __init at91_add_device_watchdog(void)
> -{
> - platform_device_register(&at91sam9263_wdt_device);
> -}
> -#else
> -static void __init at91_add_device_watchdog(void) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * PWM
> - * --------------------------------------------------------------------*/
> -
> -#if IS_ENABLED(CONFIG_PWM_ATMEL)
> -static struct resource pwm_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_PWMC,
> - .end = AT91SAM9263_BASE_PWMC + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_pwm0_device = {
> - .name = "at91sam9rl-pwm",
> - .id = -1,
> - .resource = pwm_resources,
> - .num_resources = ARRAY_SIZE(pwm_resources),
> -};
> -
> -void __init at91_add_device_pwm(u32 mask)
> -{
> - if (mask & (1 << AT91_PWM0))
> - at91_set_B_periph(AT91_PIN_PB7, 1); /* enable PWM0 */
> -
> - if (mask & (1 << AT91_PWM1))
> - at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */
> -
> - if (mask & (1 << AT91_PWM2))
> - at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */
> -
> - if (mask & (1 << AT91_PWM3))
> - at91_set_B_periph(AT91_PIN_PB29, 1); /* enable PWM3 */
> -
> - platform_device_register(&at91sam9263_pwm0_device);
> -}
> -#else
> -void __init at91_add_device_pwm(u32 mask) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * SSC -- Synchronous Serial Controller
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
> -static u64 ssc0_dmamask = DMA_BIT_MASK(32);
> -
> -static struct resource ssc0_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_SSC0,
> - .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_ssc0_device = {
> - .name = "at91rm9200_ssc",
> - .id = 0,
> - .dev = {
> - .dma_mask = &ssc0_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - },
> - .resource = ssc0_resources,
> - .num_resources = ARRAY_SIZE(ssc0_resources),
> -};
> -
> -static inline void configure_ssc0_pins(unsigned pins)
> -{
> - if (pins & ATMEL_SSC_TF)
> - at91_set_B_periph(AT91_PIN_PB0, 1);
> - if (pins & ATMEL_SSC_TK)
> - at91_set_B_periph(AT91_PIN_PB1, 1);
> - if (pins & ATMEL_SSC_TD)
> - at91_set_B_periph(AT91_PIN_PB2, 1);
> - if (pins & ATMEL_SSC_RD)
> - at91_set_B_periph(AT91_PIN_PB3, 1);
> - if (pins & ATMEL_SSC_RK)
> - at91_set_B_periph(AT91_PIN_PB4, 1);
> - if (pins & ATMEL_SSC_RF)
> - at91_set_B_periph(AT91_PIN_PB5, 1);
> -}
> -
> -static u64 ssc1_dmamask = DMA_BIT_MASK(32);
> -
> -static struct resource ssc1_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_SSC1,
> - .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct platform_device at91sam9263_ssc1_device = {
> - .name = "at91rm9200_ssc",
> - .id = 1,
> - .dev = {
> - .dma_mask = &ssc1_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - },
> - .resource = ssc1_resources,
> - .num_resources = ARRAY_SIZE(ssc1_resources),
> -};
> -
> -static inline void configure_ssc1_pins(unsigned pins)
> -{
> - if (pins & ATMEL_SSC_TF)
> - at91_set_A_periph(AT91_PIN_PB6, 1);
> - if (pins & ATMEL_SSC_TK)
> - at91_set_A_periph(AT91_PIN_PB7, 1);
> - if (pins & ATMEL_SSC_TD)
> - at91_set_A_periph(AT91_PIN_PB8, 1);
> - if (pins & ATMEL_SSC_RD)
> - at91_set_A_periph(AT91_PIN_PB9, 1);
> - if (pins & ATMEL_SSC_RK)
> - at91_set_A_periph(AT91_PIN_PB10, 1);
> - if (pins & ATMEL_SSC_RF)
> - at91_set_A_periph(AT91_PIN_PB11, 1);
> -}
> -
> -/*
> - * SSC controllers are accessed through library code, instead of any
> - * kind of all-singing/all-dancing driver. For example one could be
> - * used by a particular I2S audio codec's driver, while another one
> - * on the same system might be used by a custom data capture driver.
> - */
> -void __init at91_add_device_ssc(unsigned id, unsigned pins)
> -{
> - struct platform_device *pdev;
> -
> - /*
> - * NOTE: caller is responsible for passing information matching
> - * "pins" to whatever will be using each particular controller.
> - */
> - switch (id) {
> - case AT91SAM9263_ID_SSC0:
> - pdev = &at91sam9263_ssc0_device;
> - configure_ssc0_pins(pins);
> - break;
> - case AT91SAM9263_ID_SSC1:
> - pdev = &at91sam9263_ssc1_device;
> - configure_ssc1_pins(pins);
> - break;
> - default:
> - return;
> - }
> -
> - platform_device_register(pdev);
> -}
> -
> -#else
> -void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
> -#endif
> -
> -
> -/* --------------------------------------------------------------------
> - * UART
> - * -------------------------------------------------------------------- */
> -
> -#if defined(CONFIG_SERIAL_ATMEL)
> -
> -static struct resource dbgu_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_DBGU,
> - .end = AT91SAM9263_BASE_DBGU + SZ_512 - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91_ID_SYS,
> - .end = NR_IRQS_LEGACY + AT91_ID_SYS,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct atmel_uart_data dbgu_data = {
> - .use_dma_tx = 0,
> - .use_dma_rx = 0, /* DBGU not capable of receive DMA */
> -};
> -
> -static u64 dbgu_dmamask = DMA_BIT_MASK(32);
> -
> -static struct platform_device at91sam9263_dbgu_device = {
> - .name = "atmel_usart",
> - .id = 0,
> - .dev = {
> - .dma_mask = &dbgu_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = &dbgu_data,
> - },
> - .resource = dbgu_resources,
> - .num_resources = ARRAY_SIZE(dbgu_resources),
> -};
> -
> -static inline void configure_dbgu_pins(void)
> -{
> - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
> - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
> -}
> -
> -static struct resource uart0_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_US0,
> - .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct atmel_uart_data uart0_data = {
> - .use_dma_tx = 1,
> - .use_dma_rx = 1,
> -};
> -
> -static u64 uart0_dmamask = DMA_BIT_MASK(32);
> -
> -static struct platform_device at91sam9263_uart0_device = {
> - .name = "atmel_usart",
> - .id = 1,
> - .dev = {
> - .dma_mask = &uart0_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = &uart0_data,
> - },
> - .resource = uart0_resources,
> - .num_resources = ARRAY_SIZE(uart0_resources),
> -};
> -
> -static inline void configure_usart0_pins(unsigned pins)
> -{
> - at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
> - at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
> -
> - if (pins & ATMEL_UART_RTS)
> - at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
> - if (pins & ATMEL_UART_CTS)
> - at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
> -}
> -
> -static struct resource uart1_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_US1,
> - .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct atmel_uart_data uart1_data = {
> - .use_dma_tx = 1,
> - .use_dma_rx = 1,
> -};
> -
> -static u64 uart1_dmamask = DMA_BIT_MASK(32);
> -
> -static struct platform_device at91sam9263_uart1_device = {
> - .name = "atmel_usart",
> - .id = 2,
> - .dev = {
> - .dma_mask = &uart1_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = &uart1_data,
> - },
> - .resource = uart1_resources,
> - .num_resources = ARRAY_SIZE(uart1_resources),
> -};
> -
> -static inline void configure_usart1_pins(unsigned pins)
> -{
> - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
> - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
> -
> - if (pins & ATMEL_UART_RTS)
> - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
> - if (pins & ATMEL_UART_CTS)
> - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
> -}
> -
> -static struct resource uart2_resources[] = {
> - [0] = {
> - .start = AT91SAM9263_BASE_US2,
> - .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
> - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static struct atmel_uart_data uart2_data = {
> - .use_dma_tx = 1,
> - .use_dma_rx = 1,
> -};
> -
> -static u64 uart2_dmamask = DMA_BIT_MASK(32);
> -
> -static struct platform_device at91sam9263_uart2_device = {
> - .name = "atmel_usart",
> - .id = 3,
> - .dev = {
> - .dma_mask = &uart2_dmamask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - .platform_data = &uart2_data,
> - },
> - .resource = uart2_resources,
> - .num_resources = ARRAY_SIZE(uart2_resources),
> -};
> -
> -static inline void configure_usart2_pins(unsigned pins)
> -{
> - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
> - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
> -
> - if (pins & ATMEL_UART_RTS)
> - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
> - if (pins & ATMEL_UART_CTS)
> - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
> -}
> -
> -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
> -
> -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
> -{
> - struct platform_device *pdev;
> - struct atmel_uart_data *pdata;
> -
> - switch (id) {
> - case 0: /* DBGU */
> - pdev = &at91sam9263_dbgu_device;
> - configure_dbgu_pins();
> - break;
> - case AT91SAM9263_ID_US0:
> - pdev = &at91sam9263_uart0_device;
> - configure_usart0_pins(pins);
> - break;
> - case AT91SAM9263_ID_US1:
> - pdev = &at91sam9263_uart1_device;
> - configure_usart1_pins(pins);
> - break;
> - case AT91SAM9263_ID_US2:
> - pdev = &at91sam9263_uart2_device;
> - configure_usart2_pins(pins);
> - break;
> - default:
> - return;
> - }
> - pdata = pdev->dev.platform_data;
> - pdata->num = portnr; /* update to mapped ID */
> -
> - if (portnr < ATMEL_MAX_UART)
> - at91_uarts[portnr] = pdev;
> -}
> -
> -void __init at91_add_device_serial(void)
> -{
> - int i;
> -
> - for (i = 0; i < ATMEL_MAX_UART; i++) {
> - if (at91_uarts[i])
> - platform_device_register(at91_uarts[i]);
> - }
> -}
> -#else
> -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
> -void __init at91_add_device_serial(void) {}
> -#endif
> -
> -
> -/* -------------------------------------------------------------------- */
> -/*
> - * These devices are always present and don't need any board-specific
> - * setup.
> - */
> -static int __init at91_add_standard_devices(void)
> -{
> - if (of_have_populated_dt())
> - return 0;
> -
> - at91_add_device_rtt();
> - at91_add_device_watchdog();
> - at91_add_device_tc();
> - return 0;
> -}
> -
> -arch_initcall(at91_add_standard_devices);
> diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
> deleted file mode 100644
> index d76680f2a209..000000000000
> --- a/arch/arm/mach-at91/board-sam9263ek.c
> +++ /dev/null
> @@ -1,493 +0,0 @@
> -/*
> - * linux/arch/arm/mach-at91/board-sam9263ek.c
> - *
> - * Copyright (C) 2005 SAN People
> - * Copyright (C) 2007 Atmel Corporation.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> - */
> -
> -#include <linux/types.h>
> -#include <linux/gpio.h>
> -#include <linux/init.h>
> -#include <linux/mm.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/spi/spi.h>
> -#include <linux/spi/ads7846.h>
> -#include <linux/platform_data/at24.h>
> -#include <linux/fb.h>
> -#include <linux/gpio_keys.h>
> -#include <linux/input.h>
> -#include <linux/leds.h>
> -#include <linux/pwm.h>
> -#include <linux/leds_pwm.h>
> -
> -#include <video/atmel_lcdc.h>
> -
> -#include <asm/setup.h>
> -#include <asm/mach-types.h>
> -#include <asm/irq.h>
> -
> -#include <asm/mach/arch.h>
> -#include <asm/mach/map.h>
> -#include <asm/mach/irq.h>
> -
> -#include <mach/hardware.h>
> -#include <mach/at91sam9_smc.h>
> -#include <mach/system_rev.h>
> -
> -#include "at91_aic.h"
> -#include "board.h"
> -#include "sam9_smc.h"
> -#include "generic.h"
> -#include "gpio.h"
> -
> -
> -static void __init ek_init_early(void)
> -{
> - /* Initialize processor: 16.367 MHz crystal */
> - at91_initialize(16367660);
> -}
> -
> -/*
> - * USB Host port
> - */
> -static struct at91_usbh_data __initdata ek_usbh_data = {
> - .ports = 2,
> - .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
> - .vbus_pin_active_low = {1, 1},
> - .overcurrent_pin= {-EINVAL, -EINVAL},
> -};
> -
> -/*
> - * USB Device port
> - */
> -static struct at91_udc_data __initdata ek_udc_data = {
> - .vbus_pin = AT91_PIN_PA25,
> - .pullup_pin = -EINVAL, /* pull-up driven by UDC */
> -};
> -
> -
> -/*
> - * ADS7846 Touchscreen
> - */
> -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
> -static int ads7843_pendown_state(void)
> -{
> - return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */
> -}
> -
> -static struct ads7846_platform_data ads_info = {
> - .model = 7843,
> - .x_min = 150,
> - .x_max = 3830,
> - .y_min = 190,
> - .y_max = 3830,
> - .vref_delay_usecs = 100,
> - .x_plate_ohms = 450,
> - .y_plate_ohms = 250,
> - .pressure_max = 15000,
> - .debounce_max = 1,
> - .debounce_rep = 0,
> - .debounce_tol = (~0),
> - .get_pendown_state = ads7843_pendown_state,
> -};
> -
> -static void __init ek_add_device_ts(void)
> -{
> - at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */
> - at91_set_gpio_input(AT91_PIN_PA31, 1); /* Touchscreen BUSY signal */
> -}
> -#else
> -static void __init ek_add_device_ts(void) {}
> -#endif
> -
> -/*
> - * SPI devices.
> - */
> -static struct spi_board_info ek_spi_devices[] = {
> -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
> - { /* DataFlash card */
> - .modalias = "mtd_dataflash",
> - .chip_select = 0,
> - .max_speed_hz = 15 * 1000 * 1000,
> - .bus_num = 0,
> - },
> -#endif
> -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
> - {
> - .modalias = "ads7846",
> - .chip_select = 3,
> - .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
> - .bus_num = 0,
> - .platform_data = &ads_info,
> - .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
> - },
> -#endif
> -};
> -
> -
> -/*
> - * MCI (SD/MMC)
> - */
> -static struct mci_platform_data __initdata mci1_data = {
> - .slot[0] = {
> - .bus_width = 4,
> - .detect_pin = AT91_PIN_PE18,
> - .wp_pin = AT91_PIN_PE19,
> - },
> -};
> -
> -
> -/*
> - * MACB Ethernet device
> - */
> -static struct macb_platform_data __initdata ek_macb_data = {
> - .phy_irq_pin = AT91_PIN_PE31,
> - .is_rmii = 1,
> -};
> -
> -
> -/*
> - * NAND flash
> - */
> -static struct mtd_partition __initdata ek_nand_partition[] = {
> - {
> - .name = "Partition 1",
> - .offset = 0,
> - .size = SZ_64M,
> - },
> - {
> - .name = "Partition 2",
> - .offset = MTDPART_OFS_NXTBLK,
> - .size = MTDPART_SIZ_FULL,
> - },
> -};
> -
> -static struct atmel_nand_data __initdata ek_nand_data = {
> - .ale = 21,
> - .cle = 22,
> - .det_pin = -EINVAL,
> - .rdy_pin = AT91_PIN_PA22,
> - .enable_pin = AT91_PIN_PD15,
> - .ecc_mode = NAND_ECC_SOFT,
> - .on_flash_bbt = 1,
> - .parts = ek_nand_partition,
> - .num_parts = ARRAY_SIZE(ek_nand_partition),
> -};
> -
> -static struct sam9_smc_config __initdata ek_nand_smc_config = {
> - .ncs_read_setup = 0,
> - .nrd_setup = 1,
> - .ncs_write_setup = 0,
> - .nwe_setup = 1,
> -
> - .ncs_read_pulse = 3,
> - .nrd_pulse = 3,
> - .ncs_write_pulse = 3,
> - .nwe_pulse = 3,
> -
> - .read_cycle = 5,
> - .write_cycle = 5,
> -
> - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
> - .tdf_cycles = 2,
> -};
> -
> -static void __init ek_add_device_nand(void)
> -{
> - ek_nand_data.bus_width_16 = board_have_nand_16bit();
> - /* setup bus-width (8 or 16) */
> - if (ek_nand_data.bus_width_16)
> - ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
> - else
> - ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
> -
> - /* configure chip-select 3 (NAND) */
> - sam9_smc_configure(0, 3, &ek_nand_smc_config);
> -
> - at91_add_device_nand(&ek_nand_data);
> -}
> -
> -
> -/*
> - * I2C devices
> - */
> -static struct at24_platform_data at24c512 = {
> - .byte_len = SZ_512K / 8,
> - .page_size = 128,
> - .flags = AT24_FLAG_ADDR16,
> -};
> -
> -
> -static struct i2c_board_info __initdata ek_i2c_devices[] = {
> - {
> - I2C_BOARD_INFO("24c512", 0x50),
> - .platform_data = &at24c512,
> - },
> - /* more devices can be added using expansion connectors */
> -};
> -
> -/*
> - * LCD Controller
> - */
> -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
> -static struct fb_videomode at91_tft_vga_modes[] = {
> - {
> - .name = "TX09D50VM1CCA @ 60",
> - .refresh = 60,
> - .xres = 240, .yres = 320,
> - .pixclock = KHZ2PICOS(4965),
> -
> - .left_margin = 1, .right_margin = 33,
> - .upper_margin = 1, .lower_margin = 0,
> - .hsync_len = 5, .vsync_len = 1,
> -
> - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
> - .vmode = FB_VMODE_NONINTERLACED,
> - },
> -};
> -
> -static struct fb_monspecs at91fb_default_monspecs = {
> - .manufacturer = "HIT",
> - .monitor = "TX09D70VM1CCA",
> -
> - .modedb = at91_tft_vga_modes,
> - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
> - .hfmin = 15000,
> - .hfmax = 64000,
> - .vfmin = 50,
> - .vfmax = 150,
> -};
> -
> -#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
> - | ATMEL_LCDC_DISTYPE_TFT \
> - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
> -
> -static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
> -{
> - at91_set_gpio_value(AT91_PIN_PA30, on);
> -}
> -
> -/* Driver datas */
> -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
> - .lcdcon_is_backlight = true,
> - .default_bpp = 16,
> - .default_dmacon = ATMEL_LCDC_DMAEN,
> - .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
> - .default_monspecs = &at91fb_default_monspecs,
> - .atmel_lcdfb_power_control = at91_lcdc_power_control,
> - .guard_time = 1,
> -};
> -
> -#else
> -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
> -#endif
> -
> -
> -/*
> - * GPIO Buttons
> - */
> -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
> -static struct gpio_keys_button ek_buttons[] = {
> - { /* BP1, "leftclic" */
> - .code = BTN_LEFT,
> - .gpio = AT91_PIN_PC5,
> - .active_low = 1,
> - .desc = "left_click",
> - .wakeup = 1,
> - },
> - { /* BP2, "rightclic" */
> - .code = BTN_RIGHT,
> - .gpio = AT91_PIN_PC4,
> - .active_low = 1,
> - .desc = "right_click",
> - .wakeup = 1,
> - }
> -};
> -
> -static struct gpio_keys_platform_data ek_button_data = {
> - .buttons = ek_buttons,
> - .nbuttons = ARRAY_SIZE(ek_buttons),
> -};
> -
> -static struct platform_device ek_button_device = {
> - .name = "gpio-keys",
> - .id = -1,
> - .num_resources = 0,
> - .dev = {
> - .platform_data = &ek_button_data,
> - }
> -};
> -
> -static void __init ek_add_device_buttons(void)
> -{
> - at91_set_GPIO_periph(AT91_PIN_PC5, 1); /* left button */
> - at91_set_deglitch(AT91_PIN_PC5, 1);
> - at91_set_GPIO_periph(AT91_PIN_PC4, 1); /* right button */
> - at91_set_deglitch(AT91_PIN_PC4, 1);
> -
> - platform_device_register(&ek_button_device);
> -}
> -#else
> -static void __init ek_add_device_buttons(void) {}
> -#endif
> -
> -
> -/*
> - * AC97
> - * reset_pin is not connected: NRST
> - */
> -static struct ac97c_platform_data ek_ac97_data = {
> - .reset_pin = -EINVAL,
> -};
> -
> -
> -/*
> - * LEDs ... these could all be PWM-driven, for variable brightness
> - */
> -static struct gpio_led ek_leds[] = {
> - { /* "right" led, green, userled2 (could be driven by pwm2) */
> - .name = "ds2",
> - .gpio = AT91_PIN_PC29,
> - .active_low = 1,
> - .default_trigger = "nand-disk",
> - },
> - { /* "power" led, yellow (could be driven by pwm0) */
> - .name = "ds3",
> - .gpio = AT91_PIN_PB7,
> - .default_trigger = "heartbeat",
> - },
> -#if !IS_ENABLED(CONFIG_LEDS_PWM)
> - {
> - .name = "ds1",
> - .gpio = AT91_PIN_PB8,
> - .active_low = 1,
> - .default_trigger = "none",
> - }
> -#endif
> -};
> -
> -/*
> - * PWM Leds
> - */
> -static struct pwm_lookup pwm_lookup[] = {
> - PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "ds1",
> - 5000, PWM_POLARITY_INVERSED),
> -};
> -
> -#if IS_ENABLED(CONFIG_LEDS_PWM)
> -static struct led_pwm pwm_leds[] = {
> - {
> - .name = "ds1",
> - .max_brightness = 255,
> - },
> -};
> -
> -static struct led_pwm_platform_data pwm_data = {
> - .num_leds = ARRAY_SIZE(pwm_leds),
> - .leds = pwm_leds,
> -};
> -
> -static struct platform_device leds_pwm = {
> - .name = "leds_pwm",
> - .id = -1,
> - .dev = {
> - .platform_data = &pwm_data,
> - },
> -};
> -#endif
> -
> -
> -/*
> - * CAN
> - */
> -static void sam9263ek_transceiver_switch(int on)
> -{
> - if (on) {
> - at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */
> - at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */
> - } else {
> - at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */
> - at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */
> - }
> -}
> -
> -static struct at91_can_data ek_can_data = {
> - .transceiver_switch = sam9263ek_transceiver_switch,
> -};
> -
> -static struct platform_device *devices[] __initdata = {
> -#if IS_ENABLED(CONFIG_LEDS_PWM)
> - &leds_pwm,
> -#endif
> -};
> -
> -static void __init ek_board_init(void)
> -{
> - at91_register_devices();
> -
> - /* Serial */
> - /* DBGU on ttyS0. (Rx & Tx only) */
> - at91_register_uart(0, 0, 0);
> -
> - /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
> - at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
> - at91_add_device_serial();
> - /* USB Host */
> - at91_add_device_usbh(&ek_usbh_data);
> - /* USB Device */
> - at91_add_device_udc(&ek_udc_data);
> - /* SPI */
> - at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */
> - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
> - /* Touchscreen */
> - ek_add_device_ts();
> - /* MMC */
> - at91_add_device_mci(1, &mci1_data);
> - /* Ethernet */
> - at91_add_device_eth(&ek_macb_data);
> - /* NAND */
> - ek_add_device_nand();
> - /* I2C */
> - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
> - /* LCD Controller */
> - at91_add_device_lcdc(&ek_lcdc_data);
> - /* Push Buttons */
> - ek_add_device_buttons();
> - /* AC97 */
> - at91_add_device_ac97(&ek_ac97_data);
> - /* LEDs */
> - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
> - pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
> -#if IS_ENABLED(CONFIG_LEDS_PWM)
> - at91_add_device_pwm(1 << AT91_PWM1);
> -#endif
> - /* CAN */
> - at91_add_device_can(&ek_can_data);
> - /* Other platform devices */
> - platform_add_devices(devices, ARRAY_SIZE(devices));
> -}
> -
> -MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
> - /* Maintainer: Atmel */
> - .init_time = at91_init_time,
> - .map_io = at91_map_io,
> - .handle_irq = at91_aic_handle_irq,
> - .init_early = ek_init_early,
> - .init_irq = at91_init_irq_default,
> - .init_machine = ek_board_init,
> -MACHINE_END
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support
2014-11-19 10:31 ` [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support Nicolas Ferre
2014-11-19 10:38 ` Nicolas Ferre
@ 2014-12-01 11:52 ` Paul Bolle
2014-12-01 16:09 ` Nicolas Ferre
1 sibling, 1 reply; 13+ messages in thread
From: Paul Bolle @ 2014-12-01 11:52 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Valentin Rothberg, linux-arm-kernel, linux-kernel,
Jean-Christophe PLAGNIOL-VILLARD, Boris BREZILLON,
Alexandre Belloni, Ludovic Desroches
On Wed, 2014-11-19 at 11:31 +0100, Nicolas Ferre wrote:
> Remove legacy support for at91sam9rl boards.
> This include board files removal plus all legacy code for non DT boards
> support.
> Use the Device Tree for running this board with newer kernels.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
There's some further cleanup possible after this patch. I noticed that
when it landed in today's linux-next (ie, next-20141201) as commit
4403ac46edcd ("ARM: at91: remove at91sam9263 legacy board support").
> arch/arm/configs/at91sam9263_defconfig | 151 ---
> arch/arm/mach-at91/Kconfig.non_dt | 21 -
> arch/arm/mach-at91/Makefile | 4 -
> arch/arm/mach-at91/at91sam9263.c | 399 --------
> arch/arm/mach-at91/at91sam9263_devices.c | 1538 ------------------------------
> arch/arm/mach-at91/board-sam9263ek.c | 493 ----------
> 6 files changed, 2606 deletions(-)
> delete mode 100644 arch/arm/configs/at91sam9263_defconfig
> delete mode 100644 arch/arm/mach-at91/at91sam9263_devices.c
> delete mode 100644 arch/arm/mach-at91/board-sam9263ek.c
>
>[...]
> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
> deleted file mode 100644
> index cef0e2f57068..000000000000
> --- a/arch/arm/mach-at91/at91sam9263_devices.c
> +++ /dev/null
>[...]
> -/* --------------------------------------------------------------------
> - * RTT
> - * -------------------------------------------------------------------- */
> -
> -static struct resource rtt0_resources[] = {
> - {
> - .start = AT91SAM9263_BASE_RTT0,
> - .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
> - .flags = IORESOURCE_MEM,
> - }, {
> - .flags = IORESOURCE_MEM,
> - }, {
> - .flags = IORESOURCE_IRQ,
> - }
> -};
> -
> -static struct platform_device at91sam9263_rtt0_device = {
> - .name = "at91_rtt",
> - .id = 0,
> - .resource = rtt0_resources,
> -};
> -
> -static struct resource rtt1_resources[] = {
> - {
> - .start = AT91SAM9263_BASE_RTT1,
> - .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
> - .flags = IORESOURCE_MEM,
> - }, {
> - .flags = IORESOURCE_MEM,
> - }, {
> - .flags = IORESOURCE_IRQ,
> - }
> -};
> -
> -static struct platform_device at91sam9263_rtt1_device = {
> - .name = "at91_rtt",
> - .id = 1,
> - .resource = rtt1_resources,
> -};
> -
> -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
> -static void __init at91_add_device_rtt_rtc(void)
> -{
> - struct platform_device *pdev;
> - struct resource *r;
> -
> - switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
This and...
> - case 0:
> - /*
> - * The second resource is needed only for the chosen RTT:
> - * GPBR will serve as the storage for RTC time offset
> - */
> - at91sam9263_rtt0_device.num_resources = 3;
> - at91sam9263_rtt1_device.num_resources = 1;
> - pdev = &at91sam9263_rtt0_device;
> - r = rtt0_resources;
> - break;
> - case 1:
> - at91sam9263_rtt0_device.num_resources = 1;
> - at91sam9263_rtt1_device.num_resources = 3;
> - pdev = &at91sam9263_rtt1_device;
> - r = rtt1_resources;
> - break;
> - default:
> - pr_err("at91sam9263: only supports 2 RTT (%d)\n",
> - CONFIG_RTC_DRV_AT91SAM9_RTT);
this are the only places were the Kconfig symbol RTC_DRV_AT91SAM9_RTT
was used. It is useless now. That matches its help text, that reads:
This option is only relevant for legacy board support and
won't be used when booting a DT board.
> - return;
> - }
> -
> - pdev->name = "rtc-at91sam9";
> - r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
> - r[1].end = r[1].start + 3;
> - r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
> - r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
> -}
> -#else
> -static void __init at91_add_device_rtt_rtc(void)
> -{
> - /* Only one resource is needed: RTT not used as RTC */
> - at91sam9263_rtt0_device.num_resources = 1;
> - at91sam9263_rtt1_device.num_resources = 1;
> -}
> -#endif
> -
> -static void __init at91_add_device_rtt(void)
> -{
> - at91_add_device_rtt_rtc();
> - platform_device_register(&at91sam9263_rtt0_device);
> - platform_device_register(&at91sam9263_rtt1_device);
> -}
Is a patch to remove that symbol from drivers/rtc/Kconfig queued
somewhere?
Paul Bolle
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy board support
2014-11-19 10:31 ` [PATCH 3/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy board support Nicolas Ferre
@ 2014-12-01 11:55 ` Paul Bolle
2014-12-01 16:09 ` Arnd Bergmann
0 siblings, 1 reply; 13+ messages in thread
From: Paul Bolle @ 2014-12-01 11:55 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Valentin Rothberg, linux-arm-kernel, linux-kernel,
Jean-Christophe PLAGNIOL-VILLARD, Boris BREZILLON,
Alexandre Belloni, Ludovic Desroches
On Wed, 2014-11-19 at 11:31 +0100, Nicolas Ferre wrote:
> Second part of at91sam9260/at91sam9g20 legacy !DT removal. This is the core !DT
> support removal for these two Atmel SoCs.
> Use the Device Tree for running this board with newer kernels.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
There might be a problem with this patch. Or maybe it only needs some
follow up cleanup. I noticed that when it landed in today's linux-next
(ie, next-20141201) as commit b2026f708e09 ("ARM: at91: remove
at91sam9260/at91sam9g20 legacy board support").
> arch/arm/configs/at91sam9260_9g20_defconfig | 145 ---
> arch/arm/mach-at91/Kconfig.non_dt | 117 ---
> arch/arm/mach-at91/Makefile | 1 -
> arch/arm/mach-at91/at91sam9260.c | 397 --------
> arch/arm/mach-at91/at91sam9260_devices.c | 1364 ---------------------------
> 5 files changed, 2024 deletions(-)
> delete mode 100644 arch/arm/configs/at91sam9260_9g20_defconfig
> delete mode 100644 arch/arm/mach-at91/at91sam9260_devices.c
>
>[...]
> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index a9458234ab23..079772047541 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
>[...]
> @@ -123,113 +113,6 @@ endif
>
> # ----------------------------------------------------------
>
> -if ARCH_AT91SAM9260
> -
> -comment "AT91SAM9260 Variants"
> -
> -comment "AT91SAM9260 / AT91SAM9XE Board Type"
> -
> -config MACH_AT91SAM9260EK
> - bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
> - select HAVE_AT91_DATAFLASH_CARD
> - help
> - Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
> - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
> -
> -config MACH_CAM60
> - bool "KwikByte KB9260 (CAM60) board"
> - help
> - Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
> - <http://www.kwikbyte.com/KB9260.html>
> -
> -config MACH_SAM9_L9260
> - bool "Olimex SAM9-L9260 board"
> - select HAVE_AT91_DATAFLASH_CARD
> - help
> - Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
> - <http://www.olimex.com/dev/sam9-L9260.html>
> -
> -config MACH_AFEB9260
> - bool "Custom afeb9260 board v1"
> - help
> - Select this if you are using custom afeb9260 board based on
> - open hardware design. Select this for revision 1 of the board.
> - <svn://194.85.238.22/home/users/george/svn/arm9eb>
> - <http://groups.google.com/group/arm9fpga-evolution-board>
The Kconfig symbol SND_AT91_SOC_AFEB9260 (see sound/soc/atmel/Kconfig)
still depends on MACH_AFEB9260. So it can't be set anymore. Is that
Kconfig symbol still needed or should it be removed too? Maybe a patch
that fixes that is queued somewhere already.
Paul Bolle
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support
2014-12-01 11:52 ` Paul Bolle
@ 2014-12-01 16:09 ` Nicolas Ferre
2014-12-22 9:28 ` Paul Bolle
0 siblings, 1 reply; 13+ messages in thread
From: Nicolas Ferre @ 2014-12-01 16:09 UTC (permalink / raw)
To: Paul Bolle, Boris BREZILLON, Alexandre Belloni
Cc: Valentin Rothberg, linux-arm-kernel, linux-kernel,
Jean-Christophe PLAGNIOL-VILLARD, Ludovic Desroches
Le 01/12/2014 12:52, Paul Bolle a écrit :
> On Wed, 2014-11-19 at 11:31 +0100, Nicolas Ferre wrote:
>> Remove legacy support for at91sam9rl boards.
>> This include board files removal plus all legacy code for non DT boards
>> support.
>> Use the Device Tree for running this board with newer kernels.
>>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> ---
>
> There's some further cleanup possible after this patch. I noticed that
> when it landed in today's linux-next (ie, next-20141201) as commit
> 4403ac46edcd ("ARM: at91: remove at91sam9263 legacy board support").
>
>> arch/arm/configs/at91sam9263_defconfig | 151 ---
>> arch/arm/mach-at91/Kconfig.non_dt | 21 -
>> arch/arm/mach-at91/Makefile | 4 -
>> arch/arm/mach-at91/at91sam9263.c | 399 --------
>> arch/arm/mach-at91/at91sam9263_devices.c | 1538 ------------------------------
>> arch/arm/mach-at91/board-sam9263ek.c | 493 ----------
>> 6 files changed, 2606 deletions(-)
>> delete mode 100644 arch/arm/configs/at91sam9263_defconfig
>> delete mode 100644 arch/arm/mach-at91/at91sam9263_devices.c
>> delete mode 100644 arch/arm/mach-at91/board-sam9263ek.c
>>
>> [...]
>> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
>> deleted file mode 100644
>> index cef0e2f57068..000000000000
>> --- a/arch/arm/mach-at91/at91sam9263_devices.c
>> +++ /dev/null
>> [...]
>> -/* --------------------------------------------------------------------
>> - * RTT
>> - * -------------------------------------------------------------------- */
>> -
>> -static struct resource rtt0_resources[] = {
>> - {
>> - .start = AT91SAM9263_BASE_RTT0,
>> - .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
>> - .flags = IORESOURCE_MEM,
>> - }, {
>> - .flags = IORESOURCE_MEM,
>> - }, {
>> - .flags = IORESOURCE_IRQ,
>> - }
>> -};
>> -
>> -static struct platform_device at91sam9263_rtt0_device = {
>> - .name = "at91_rtt",
>> - .id = 0,
>> - .resource = rtt0_resources,
>> -};
>> -
>> -static struct resource rtt1_resources[] = {
>> - {
>> - .start = AT91SAM9263_BASE_RTT1,
>> - .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
>> - .flags = IORESOURCE_MEM,
>> - }, {
>> - .flags = IORESOURCE_MEM,
>> - }, {
>> - .flags = IORESOURCE_IRQ,
>> - }
>> -};
>> -
>> -static struct platform_device at91sam9263_rtt1_device = {
>> - .name = "at91_rtt",
>> - .id = 1,
>> - .resource = rtt1_resources,
>> -};
>> -
>> -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
>> -static void __init at91_add_device_rtt_rtc(void)
>> -{
>> - struct platform_device *pdev;
>> - struct resource *r;
>> -
>> - switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
>
> This and...
>
>> - case 0:
>> - /*
>> - * The second resource is needed only for the chosen RTT:
>> - * GPBR will serve as the storage for RTC time offset
>> - */
>> - at91sam9263_rtt0_device.num_resources = 3;
>> - at91sam9263_rtt1_device.num_resources = 1;
>> - pdev = &at91sam9263_rtt0_device;
>> - r = rtt0_resources;
>> - break;
>> - case 1:
>> - at91sam9263_rtt0_device.num_resources = 1;
>> - at91sam9263_rtt1_device.num_resources = 3;
>> - pdev = &at91sam9263_rtt1_device;
>> - r = rtt1_resources;
>> - break;
>> - default:
>> - pr_err("at91sam9263: only supports 2 RTT (%d)\n",
>> - CONFIG_RTC_DRV_AT91SAM9_RTT);
>
> this are the only places were the Kconfig symbol RTC_DRV_AT91SAM9_RTT
> was used. It is useless now. That matches its help text, that reads:
> This option is only relevant for legacy board support and
> won't be used when booting a DT board.
>
>> - return;
>> - }
>> -
>> - pdev->name = "rtc-at91sam9";
>> - r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
>> - r[1].end = r[1].start + 3;
>> - r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
>> - r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
>> -}
>> -#else
>> -static void __init at91_add_device_rtt_rtc(void)
>> -{
>> - /* Only one resource is needed: RTT not used as RTC */
>> - at91sam9263_rtt0_device.num_resources = 1;
>> - at91sam9263_rtt1_device.num_resources = 1;
>> -}
>> -#endif
>> -
>> -static void __init at91_add_device_rtt(void)
>> -{
>> - at91_add_device_rtt_rtc();
>> - platform_device_register(&at91sam9263_rtt0_device);
>> - platform_device_register(&at91sam9263_rtt1_device);
>> -}
>
> Is a patch to remove that symbol from drivers/rtc/Kconfig queued
> somewhere?
Hi Paul,
In fact these config options are flagged as being useless for !DT. As
the modifications of this Kconfig (in a "drivers" branch) and the
removal of !DT boards (in a "cleaup" branch) will happen in 3.19, I was
planning to come back to these 2 options by removing them later in order
to avoid to solve a merge conflict.
https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/rtc/Kconfig?id=3969eb48ad7f3f3bef61f5474b7214e601fd2d75
As you can see in the commit above, they have been properly tagged by Boris.
So, I suggest to get rid of them during 3.19-rc phase.
Thanks, bye.
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy board support
2014-12-01 11:55 ` Paul Bolle
@ 2014-12-01 16:09 ` Arnd Bergmann
0 siblings, 0 replies; 13+ messages in thread
From: Arnd Bergmann @ 2014-12-01 16:09 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Paul Bolle, Nicolas Ferre, Boris BREZILLON, linux-kernel,
Ludovic Desroches, Alexandre Belloni,
Jean-Christophe PLAGNIOL-VILLARD, Valentin Rothberg
On Monday 01 December 2014 12:55:19 Paul Bolle wrote:
>
> There might be a problem with this patch. Or maybe it only needs some
> follow up cleanup. I noticed that when it landed in today's linux-next
> (ie, next-20141201) as commit b2026f708e09 ("ARM: at91: remove
> at91sam9260/at91sam9g20 legacy board support").
Good catch!
> The Kconfig symbol SND_AT91_SOC_AFEB9260 (see sound/soc/atmel/Kconfig)
> still depends on MACH_AFEB9260. So it can't be set anymore. Is that
> Kconfig symbol still needed or should it be removed too? Maybe a patch
> that fixes that is queued somewhere already.
I already found some other code that is now unused. I would guess that
this is in the same category, but the maintainers should comment if
they know better.
Arnd
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support
2014-12-01 16:09 ` Nicolas Ferre
@ 2014-12-22 9:28 ` Paul Bolle
2014-12-22 9:45 ` Alexandre Belloni
0 siblings, 1 reply; 13+ messages in thread
From: Paul Bolle @ 2014-12-22 9:28 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Boris BREZILLON, Alexandre Belloni, Valentin Rothberg,
linux-arm-kernel, linux-kernel, Jean-Christophe PLAGNIOL-VILLARD,
Ludovic Desroches
On Mon, 2014-12-01 at 17:09 +0100, Nicolas Ferre wrote:
> Le 01/12/2014 12:52, Paul Bolle a écrit :
> > On Wed, 2014-11-19 at 11:31 +0100, Nicolas Ferre wrote:
> >> Remove legacy support for at91sam9rl boards.
> >> This include board files removal plus all legacy code for non DT boards
> >> support.
> >> Use the Device Tree for running this board with newer kernels.
> >>
> >> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> >> ---
> >
> > There's some further cleanup possible after this patch. I noticed that
> > when it landed in today's linux-next (ie, next-20141201) as commit
> > 4403ac46edcd ("ARM: at91: remove at91sam9263 legacy board support").
> >
> >> arch/arm/configs/at91sam9263_defconfig | 151 ---
> >> arch/arm/mach-at91/Kconfig.non_dt | 21 -
> >> arch/arm/mach-at91/Makefile | 4 -
> >> arch/arm/mach-at91/at91sam9263.c | 399 --------
> >> arch/arm/mach-at91/at91sam9263_devices.c | 1538 ------------------------------
> >> arch/arm/mach-at91/board-sam9263ek.c | 493 ----------
> >> 6 files changed, 2606 deletions(-)
> >> delete mode 100644 arch/arm/configs/at91sam9263_defconfig
> >> delete mode 100644 arch/arm/mach-at91/at91sam9263_devices.c
> >> delete mode 100644 arch/arm/mach-at91/board-sam9263ek.c
> >>
> >> [...]
> >> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
> >> deleted file mode 100644
> >> index cef0e2f57068..000000000000
> >> --- a/arch/arm/mach-at91/at91sam9263_devices.c
> >> +++ /dev/null
> >> [...]
> >> -/* --------------------------------------------------------------------
> >> - * RTT
> >> - * -------------------------------------------------------------------- */
> >> -
> >> -static struct resource rtt0_resources[] = {
> >> - {
> >> - .start = AT91SAM9263_BASE_RTT0,
> >> - .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
> >> - .flags = IORESOURCE_MEM,
> >> - }, {
> >> - .flags = IORESOURCE_MEM,
> >> - }, {
> >> - .flags = IORESOURCE_IRQ,
> >> - }
> >> -};
> >> -
> >> -static struct platform_device at91sam9263_rtt0_device = {
> >> - .name = "at91_rtt",
> >> - .id = 0,
> >> - .resource = rtt0_resources,
> >> -};
> >> -
> >> -static struct resource rtt1_resources[] = {
> >> - {
> >> - .start = AT91SAM9263_BASE_RTT1,
> >> - .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
> >> - .flags = IORESOURCE_MEM,
> >> - }, {
> >> - .flags = IORESOURCE_MEM,
> >> - }, {
> >> - .flags = IORESOURCE_IRQ,
> >> - }
> >> -};
> >> -
> >> -static struct platform_device at91sam9263_rtt1_device = {
> >> - .name = "at91_rtt",
> >> - .id = 1,
> >> - .resource = rtt1_resources,
> >> -};
> >> -
> >> -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
> >> -static void __init at91_add_device_rtt_rtc(void)
> >> -{
> >> - struct platform_device *pdev;
> >> - struct resource *r;
> >> -
> >> - switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
> >
> > This and...
> >
> >> - case 0:
> >> - /*
> >> - * The second resource is needed only for the chosen RTT:
> >> - * GPBR will serve as the storage for RTC time offset
> >> - */
> >> - at91sam9263_rtt0_device.num_resources = 3;
> >> - at91sam9263_rtt1_device.num_resources = 1;
> >> - pdev = &at91sam9263_rtt0_device;
> >> - r = rtt0_resources;
> >> - break;
> >> - case 1:
> >> - at91sam9263_rtt0_device.num_resources = 1;
> >> - at91sam9263_rtt1_device.num_resources = 3;
> >> - pdev = &at91sam9263_rtt1_device;
> >> - r = rtt1_resources;
> >> - break;
> >> - default:
> >> - pr_err("at91sam9263: only supports 2 RTT (%d)\n",
> >> - CONFIG_RTC_DRV_AT91SAM9_RTT);
> >
> > this are the only places were the Kconfig symbol RTC_DRV_AT91SAM9_RTT
> > was used. It is useless now. That matches its help text, that reads:
> > This option is only relevant for legacy board support and
> > won't be used when booting a DT board.
> >
> >> - return;
> >> - }
> >> -
> >> - pdev->name = "rtc-at91sam9";
> >> - r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
> >> - r[1].end = r[1].start + 3;
> >> - r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
> >> - r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
> >> -}
> >> -#else
> >> -static void __init at91_add_device_rtt_rtc(void)
> >> -{
> >> - /* Only one resource is needed: RTT not used as RTC */
> >> - at91sam9263_rtt0_device.num_resources = 1;
> >> - at91sam9263_rtt1_device.num_resources = 1;
> >> -}
> >> -#endif
> >> -
> >> -static void __init at91_add_device_rtt(void)
> >> -{
> >> - at91_add_device_rtt_rtc();
> >> - platform_device_register(&at91sam9263_rtt0_device);
> >> - platform_device_register(&at91sam9263_rtt1_device);
> >> -}
> >
> > Is a patch to remove that symbol from drivers/rtc/Kconfig queued
> > somewhere?
>
> Hi Paul,
>
> In fact these config options are flagged as being useless for !DT. As
> the modifications of this Kconfig (in a "drivers" branch) and the
> removal of !DT boards (in a "cleaup" branch) will happen in 3.19, I was
> planning to come back to these 2 options by removing them later in order
> to avoid to solve a merge conflict.
>
> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/rtc/Kconfig?id=3969eb48ad7f3f3bef61f5474b7214e601fd2d75
>
> As you can see in the commit above, they have been properly tagged by Boris.
Yes, those two lines were noticed by me (see above).
> So, I suggest to get rid of them during 3.19-rc phase.
There's still an entry for RTC_DRV_AT91SAM9_RTT in next-20141221 (and
v3.19-rc1). So this I send this message as a reminder that this cleanup
is still needed.
Thanks,
Paul Bolle
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support
2014-12-22 9:28 ` Paul Bolle
@ 2014-12-22 9:45 ` Alexandre Belloni
2015-01-05 11:16 ` Nicolas Ferre
0 siblings, 1 reply; 13+ messages in thread
From: Alexandre Belloni @ 2014-12-22 9:45 UTC (permalink / raw)
To: Paul Bolle
Cc: Nicolas Ferre, Boris BREZILLON, Valentin Rothberg,
linux-arm-kernel, linux-kernel, Jean-Christophe PLAGNIOL-VILLARD,
Ludovic Desroches
Hi Paul,
On 22/12/2014 at 10:28:48 +0100, Paul Bolle wrote :
> > So, I suggest to get rid of them during 3.19-rc phase.
>
> There's still an entry for RTC_DRV_AT91SAM9_RTT in next-20141221 (and
> v3.19-rc1). So this I send this message as a reminder that this cleanup
> is still needed.
>
Thanks for the reminder, the pull request was actually waiting for
3.19-rc1 to get released before being sent. This should be solved in the
next rc.
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support
2014-12-22 9:45 ` Alexandre Belloni
@ 2015-01-05 11:16 ` Nicolas Ferre
0 siblings, 0 replies; 13+ messages in thread
From: Nicolas Ferre @ 2015-01-05 11:16 UTC (permalink / raw)
To: Alexandre Belloni, Paul Bolle
Cc: Boris BREZILLON, Valentin Rothberg, linux-arm-kernel,
linux-kernel, Jean-Christophe PLAGNIOL-VILLARD,
Ludovic Desroches
Le 22/12/2014 10:45, Alexandre Belloni a écrit :
> Hi Paul,
>
> On 22/12/2014 at 10:28:48 +0100, Paul Bolle wrote :
>>> So, I suggest to get rid of them during 3.19-rc phase.
>>
>> There's still an entry for RTC_DRV_AT91SAM9_RTT in next-20141221 (and
>> v3.19-rc1). So this I send this message as a reminder that this cleanup
>> is still needed.
>>
>
> Thanks for the reminder, the pull request was actually waiting for
> 3.19-rc1 to get released before being sent. This should be solved in the
> next rc.
Yes, a new version of this pull-request has just been sent: ([GIT PULL]
at91: fixes for 3.19 #1 (bis)).
Thanks a lot for the reminder Paul. Bye,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2015-01-05 11:16 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-11-19 10:31 [PATCH 0/4] ARM: at91: remove !DT support for at91sam9260/9g20 and at91sam9263 Nicolas Ferre
2014-11-19 10:31 ` [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support Nicolas Ferre
2014-11-19 10:38 ` Nicolas Ferre
2014-12-01 11:52 ` Paul Bolle
2014-12-01 16:09 ` Nicolas Ferre
2014-12-22 9:28 ` Paul Bolle
2014-12-22 9:45 ` Alexandre Belloni
2015-01-05 11:16 ` Nicolas Ferre
2014-11-19 10:31 ` [PATCH 2/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files Nicolas Ferre
2014-11-19 10:31 ` [PATCH 3/4] ARM: at91: remove at91sam9260/at91sam9g20 legacy board support Nicolas Ferre
2014-12-01 11:55 ` Paul Bolle
2014-12-01 16:09 ` Arnd Bergmann
2014-11-19 10:31 ` [PATCH 4/4] ARM: at91/Kconfig: remove unused config options Nicolas Ferre
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).