* Re: [PATCH] platform: move from strlcpy with unused retval to strscpy
2022-08-18 21:00 [PATCH] platform: move from strlcpy with unused retval to strscpy Wolfram Sang
@ 2022-08-18 21:58 ` Maximilian Luz
2022-08-19 6:22 ` Andy Shevchenko
2022-08-26 10:01 ` Hans de Goede
2 siblings, 0 replies; 7+ messages in thread
From: Maximilian Luz @ 2022-08-18 21:58 UTC (permalink / raw)
To: Wolfram Sang, linux-kernel
Cc: Hans de Goede, Mark Gross, Divya Bharathi, Prasanth Ksr,
Henrique de Moraes Holschuh, platform-driver-x86,
Dell.Client.Kernel, ibm-acpi-devel
On 8/18/22 23:00, Wolfram Sang wrote:
> Follow the advice of the below link and prefer 'strscpy' in this
> subsystem. Conversion is 1:1 because the return value is not used.
> Generated by a coccinelle script.
>
> Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for platform/surface
> ---
> drivers/platform/surface/surface3_power.c | 2 +-> drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 2 +-
> drivers/platform/x86/intel/chtwc_int33fe.c | 6 +++---
> drivers/platform/x86/thinkpad_acpi.c | 4 ++--
> 4 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c
> index 444ec81ba02d..4c53d116d59b 100644
> --- a/drivers/platform/surface/surface3_power.c
> +++ b/drivers/platform/surface/surface3_power.c
> @@ -519,7 +519,7 @@ static int mshw0011_probe(struct i2c_client *client)
> i2c_set_clientdata(client, data);
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
> + strscpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
>
> bat0 = i2c_acpi_new_device(dev, 1, &board_info);
> if (IS_ERR(bat0))
> diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> index 636bdfa83284..0a6411a8a104 100644
> --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> @@ -270,7 +270,7 @@ void strlcpy_attr(char *dest, char *src)
> size_t len = strlen(src) + 1;
>
> if (len > 1 && len <= MAX_BUFF)
> - strlcpy(dest, src, len);
> + strscpy(dest, src, len);
>
> /*len can be zero because any property not-applicable to attribute can
> * be empty so check only for too long buffers and log error
> diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c
> index c52ac23e2331..1ea989df513c 100644
> --- a/drivers/platform/x86/intel/chtwc_int33fe.c
> +++ b/drivers/platform/x86/intel/chtwc_int33fe.c
> @@ -270,7 +270,7 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
> }
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
> + strscpy(board_info.type, "max17047", I2C_NAME_SIZE);
> board_info.dev_name = "max17047";
> board_info.fwnode = fwnode;
> data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info);
> @@ -361,7 +361,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
> }
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> + strscpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> board_info.dev_name = "fusb302";
> board_info.fwnode = fwnode;
> board_info.irq = fusb302_irq;
> @@ -381,7 +381,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
> memset(&board_info, 0, sizeof(board_info));
> board_info.dev_name = "pi3usb30532";
> board_info.fwnode = fwnode;
> - strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
> + strscpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
>
> data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
> if (IS_ERR(data->pi3usb30532)) {
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index 22d4e8633e30..8dad0428a83c 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -7623,9 +7623,9 @@ static int __init volume_create_alsa_mixer(void)
> data = card->private_data;
> data->card = card;
>
> - strlcpy(card->driver, TPACPI_ALSA_DRVNAME,
> + strscpy(card->driver, TPACPI_ALSA_DRVNAME,
> sizeof(card->driver));
> - strlcpy(card->shortname, TPACPI_ALSA_SHRTNAME,
> + strscpy(card->shortname, TPACPI_ALSA_SHRTNAME,
> sizeof(card->shortname));
> snprintf(card->mixername, sizeof(card->mixername), "ThinkPad EC %s",
> (thinkpad_id.ec_version_str) ?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] platform: move from strlcpy with unused retval to strscpy
2022-08-18 21:00 [PATCH] platform: move from strlcpy with unused retval to strscpy Wolfram Sang
2022-08-18 21:58 ` Maximilian Luz
@ 2022-08-19 6:22 ` Andy Shevchenko
2022-08-19 8:57 ` Hans de Goede
2022-08-19 9:19 ` Wolfram Sang
2022-08-26 10:01 ` Hans de Goede
2 siblings, 2 replies; 7+ messages in thread
From: Andy Shevchenko @ 2022-08-19 6:22 UTC (permalink / raw)
To: Wolfram Sang
Cc: Linux Kernel Mailing List, Hans de Goede, Mark Gross,
Maximilian Luz, Divya Bharathi, Prasanth Ksr,
Henrique de Moraes Holschuh, Platform Driver, Dell.Client.Kernel,
Thinkpad-acpi devel ML
On Fri, Aug 19, 2022 at 12:06 AM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:
>
> Follow the advice of the below link and prefer 'strscpy' in this
We refer to the functions like this: strscpy() (note no quote marks).
> subsystem. Conversion is 1:1 because the return value is not used.
> Generated by a coccinelle script.
I assume you are experimenting with coccinelle, so I have no objection
to the change, but in PDx86 we usually want to have one patch per
driver. Can you split?
You also may add
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
to each of them.
> Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> drivers/platform/surface/surface3_power.c | 2 +-
> drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 2 +-
> drivers/platform/x86/intel/chtwc_int33fe.c | 6 +++---
> drivers/platform/x86/thinkpad_acpi.c | 4 ++--
> 4 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c
> index 444ec81ba02d..4c53d116d59b 100644
> --- a/drivers/platform/surface/surface3_power.c
> +++ b/drivers/platform/surface/surface3_power.c
> @@ -519,7 +519,7 @@ static int mshw0011_probe(struct i2c_client *client)
> i2c_set_clientdata(client, data);
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
> + strscpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
>
> bat0 = i2c_acpi_new_device(dev, 1, &board_info);
> if (IS_ERR(bat0))
> diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> index 636bdfa83284..0a6411a8a104 100644
> --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> @@ -270,7 +270,7 @@ void strlcpy_attr(char *dest, char *src)
> size_t len = strlen(src) + 1;
>
> if (len > 1 && len <= MAX_BUFF)
> - strlcpy(dest, src, len);
> + strscpy(dest, src, len);
>
> /*len can be zero because any property not-applicable to attribute can
> * be empty so check only for too long buffers and log error
> diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c
> index c52ac23e2331..1ea989df513c 100644
> --- a/drivers/platform/x86/intel/chtwc_int33fe.c
> +++ b/drivers/platform/x86/intel/chtwc_int33fe.c
> @@ -270,7 +270,7 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
> }
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
> + strscpy(board_info.type, "max17047", I2C_NAME_SIZE);
> board_info.dev_name = "max17047";
> board_info.fwnode = fwnode;
> data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info);
> @@ -361,7 +361,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
> }
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> + strscpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> board_info.dev_name = "fusb302";
> board_info.fwnode = fwnode;
> board_info.irq = fusb302_irq;
> @@ -381,7 +381,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
> memset(&board_info, 0, sizeof(board_info));
> board_info.dev_name = "pi3usb30532";
> board_info.fwnode = fwnode;
> - strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
> + strscpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
>
> data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
> if (IS_ERR(data->pi3usb30532)) {
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index 22d4e8633e30..8dad0428a83c 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -7623,9 +7623,9 @@ static int __init volume_create_alsa_mixer(void)
> data = card->private_data;
> data->card = card;
>
> - strlcpy(card->driver, TPACPI_ALSA_DRVNAME,
> + strscpy(card->driver, TPACPI_ALSA_DRVNAME,
> sizeof(card->driver));
> - strlcpy(card->shortname, TPACPI_ALSA_SHRTNAME,
> + strscpy(card->shortname, TPACPI_ALSA_SHRTNAME,
> sizeof(card->shortname));
> snprintf(card->mixername, sizeof(card->mixername), "ThinkPad EC %s",
> (thinkpad_id.ec_version_str) ?
> --
> 2.35.1
>
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] platform: move from strlcpy with unused retval to strscpy
2022-08-19 6:22 ` Andy Shevchenko
@ 2022-08-19 8:57 ` Hans de Goede
2022-08-19 9:19 ` Wolfram Sang
1 sibling, 0 replies; 7+ messages in thread
From: Hans de Goede @ 2022-08-19 8:57 UTC (permalink / raw)
To: Andy Shevchenko, Wolfram Sang
Cc: Linux Kernel Mailing List, Mark Gross, Maximilian Luz,
Divya Bharathi, Prasanth Ksr, Henrique de Moraes Holschuh,
Platform Driver, Dell.Client.Kernel, Thinkpad-acpi devel ML
Hi,
On 8/19/22 08:22, Andy Shevchenko wrote:
> On Fri, Aug 19, 2022 at 12:06 AM Wolfram Sang
> <wsa+renesas@sang-engineering.com> wrote:
>>
>> Follow the advice of the below link and prefer 'strscpy' in this
>
> We refer to the functions like this: strscpy() (note no quote marks).
>
>> subsystem. Conversion is 1:1 because the return value is not used.
>> Generated by a coccinelle script.
>
> I assume you are experimenting with coccinelle, so I have no objection
> to the change, but in PDx86 we usually want to have one patch per
> driver. Can you split?
Actually, although we do in general split patches per driver
as Andy says, this one is so small / simple that I'm happy to
merge it as is. I'll pick this up during my next round of
merges coming Monday.
> You also may add
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Thanks for the review.
Regards,
Hans
> to each of them.
>
>> Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
>> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
>> ---
>> drivers/platform/surface/surface3_power.c | 2 +-
>> drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 2 +-
>> drivers/platform/x86/intel/chtwc_int33fe.c | 6 +++---
>> drivers/platform/x86/thinkpad_acpi.c | 4 ++--
>> 4 files changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c
>> index 444ec81ba02d..4c53d116d59b 100644
>> --- a/drivers/platform/surface/surface3_power.c
>> +++ b/drivers/platform/surface/surface3_power.c
>> @@ -519,7 +519,7 @@ static int mshw0011_probe(struct i2c_client *client)
>> i2c_set_clientdata(client, data);
>>
>> memset(&board_info, 0, sizeof(board_info));
>> - strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
>> + strscpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
>>
>> bat0 = i2c_acpi_new_device(dev, 1, &board_info);
>> if (IS_ERR(bat0))
>> diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
>> index 636bdfa83284..0a6411a8a104 100644
>> --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
>> +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
>> @@ -270,7 +270,7 @@ void strlcpy_attr(char *dest, char *src)
>> size_t len = strlen(src) + 1;
>>
>> if (len > 1 && len <= MAX_BUFF)
>> - strlcpy(dest, src, len);
>> + strscpy(dest, src, len);
>>
>> /*len can be zero because any property not-applicable to attribute can
>> * be empty so check only for too long buffers and log error
>> diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c
>> index c52ac23e2331..1ea989df513c 100644
>> --- a/drivers/platform/x86/intel/chtwc_int33fe.c
>> +++ b/drivers/platform/x86/intel/chtwc_int33fe.c
>> @@ -270,7 +270,7 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
>> }
>>
>> memset(&board_info, 0, sizeof(board_info));
>> - strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
>> + strscpy(board_info.type, "max17047", I2C_NAME_SIZE);
>> board_info.dev_name = "max17047";
>> board_info.fwnode = fwnode;
>> data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info);
>> @@ -361,7 +361,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
>> }
>>
>> memset(&board_info, 0, sizeof(board_info));
>> - strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
>> + strscpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
>> board_info.dev_name = "fusb302";
>> board_info.fwnode = fwnode;
>> board_info.irq = fusb302_irq;
>> @@ -381,7 +381,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
>> memset(&board_info, 0, sizeof(board_info));
>> board_info.dev_name = "pi3usb30532";
>> board_info.fwnode = fwnode;
>> - strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
>> + strscpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
>>
>> data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
>> if (IS_ERR(data->pi3usb30532)) {
>> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
>> index 22d4e8633e30..8dad0428a83c 100644
>> --- a/drivers/platform/x86/thinkpad_acpi.c
>> +++ b/drivers/platform/x86/thinkpad_acpi.c
>> @@ -7623,9 +7623,9 @@ static int __init volume_create_alsa_mixer(void)
>> data = card->private_data;
>> data->card = card;
>>
>> - strlcpy(card->driver, TPACPI_ALSA_DRVNAME,
>> + strscpy(card->driver, TPACPI_ALSA_DRVNAME,
>> sizeof(card->driver));
>> - strlcpy(card->shortname, TPACPI_ALSA_SHRTNAME,
>> + strscpy(card->shortname, TPACPI_ALSA_SHRTNAME,
>> sizeof(card->shortname));
>> snprintf(card->mixername, sizeof(card->mixername), "ThinkPad EC %s",
>> (thinkpad_id.ec_version_str) ?
>> --
>> 2.35.1
>>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] platform: move from strlcpy with unused retval to strscpy
2022-08-19 6:22 ` Andy Shevchenko
2022-08-19 8:57 ` Hans de Goede
@ 2022-08-19 9:19 ` Wolfram Sang
2022-08-19 9:20 ` Hans de Goede
1 sibling, 1 reply; 7+ messages in thread
From: Wolfram Sang @ 2022-08-19 9:19 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Linux Kernel Mailing List, Hans de Goede, Mark Gross,
Maximilian Luz, Divya Bharathi, Prasanth Ksr,
Henrique de Moraes Holschuh, Platform Driver, Dell.Client.Kernel,
Thinkpad-acpi devel ML
[-- Attachment #1: Type: text/plain, Size: 395 bytes --]
> I assume you are experimenting with coccinelle, so I have no objection
> to the change, but in PDx86 we usually want to have one patch per
> driver. Can you split?
I can split if you want.
I intentionally did group per subsystem, otherwise I would have sent out
1200+ patches. So, I chose to do it on subsystem level first and adapt
later where this scheme does not fit.
So, your choice.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] platform: move from strlcpy with unused retval to strscpy
2022-08-19 9:19 ` Wolfram Sang
@ 2022-08-19 9:20 ` Hans de Goede
0 siblings, 0 replies; 7+ messages in thread
From: Hans de Goede @ 2022-08-19 9:20 UTC (permalink / raw)
To: Wolfram Sang, Andy Shevchenko, Linux Kernel Mailing List,
Mark Gross, Maximilian Luz, Divya Bharathi, Prasanth Ksr,
Henrique de Moraes Holschuh, Platform Driver, Dell.Client.Kernel,
Thinkpad-acpi devel ML
Hi,
On 8/19/22 11:19, Wolfram Sang wrote:
>
>> I assume you are experimenting with coccinelle, so I have no objection
>> to the change, but in PDx86 we usually want to have one patch per
>> driver. Can you split?
>
> I can split if you want.
>
> I intentionally did group per subsystem, otherwise I would have sent out
> 1200+ patches. So, I chose to do it on subsystem level first and adapt
> later where this scheme does not fit.
See my reply to Andy, there is no need to split this further IMHO,
as you sat 1200 patches would be a bit much.
I will merge this as is during my next round of merges.
Regards,
Hans
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] platform: move from strlcpy with unused retval to strscpy
2022-08-18 21:00 [PATCH] platform: move from strlcpy with unused retval to strscpy Wolfram Sang
2022-08-18 21:58 ` Maximilian Luz
2022-08-19 6:22 ` Andy Shevchenko
@ 2022-08-26 10:01 ` Hans de Goede
2 siblings, 0 replies; 7+ messages in thread
From: Hans de Goede @ 2022-08-26 10:01 UTC (permalink / raw)
To: Wolfram Sang, linux-kernel
Cc: Mark Gross, Maximilian Luz, Divya Bharathi, Prasanth Ksr,
Henrique de Moraes Holschuh, platform-driver-x86,
Dell.Client.Kernel, ibm-acpi-devel
Hi,
On 8/18/22 23:00, Wolfram Sang wrote:
> Follow the advice of the below link and prefer 'strscpy' in this
> subsystem. Conversion is 1:1 because the return value is not used.
> Generated by a coccinelle script.
>
> Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Thank you for your patch, I've applied this patch to my review-hans
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans
Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.
Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.
Regards,
Hans
> ---
> drivers/platform/surface/surface3_power.c | 2 +-
> drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 2 +-
> drivers/platform/x86/intel/chtwc_int33fe.c | 6 +++---
> drivers/platform/x86/thinkpad_acpi.c | 4 ++--
> 4 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c
> index 444ec81ba02d..4c53d116d59b 100644
> --- a/drivers/platform/surface/surface3_power.c
> +++ b/drivers/platform/surface/surface3_power.c
> @@ -519,7 +519,7 @@ static int mshw0011_probe(struct i2c_client *client)
> i2c_set_clientdata(client, data);
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
> + strscpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
>
> bat0 = i2c_acpi_new_device(dev, 1, &board_info);
> if (IS_ERR(bat0))
> diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> index 636bdfa83284..0a6411a8a104 100644
> --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
> @@ -270,7 +270,7 @@ void strlcpy_attr(char *dest, char *src)
> size_t len = strlen(src) + 1;
>
> if (len > 1 && len <= MAX_BUFF)
> - strlcpy(dest, src, len);
> + strscpy(dest, src, len);
>
> /*len can be zero because any property not-applicable to attribute can
> * be empty so check only for too long buffers and log error
> diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c
> index c52ac23e2331..1ea989df513c 100644
> --- a/drivers/platform/x86/intel/chtwc_int33fe.c
> +++ b/drivers/platform/x86/intel/chtwc_int33fe.c
> @@ -270,7 +270,7 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
> }
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
> + strscpy(board_info.type, "max17047", I2C_NAME_SIZE);
> board_info.dev_name = "max17047";
> board_info.fwnode = fwnode;
> data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info);
> @@ -361,7 +361,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
> }
>
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> + strscpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> board_info.dev_name = "fusb302";
> board_info.fwnode = fwnode;
> board_info.irq = fusb302_irq;
> @@ -381,7 +381,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev)
> memset(&board_info, 0, sizeof(board_info));
> board_info.dev_name = "pi3usb30532";
> board_info.fwnode = fwnode;
> - strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
> + strscpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
>
> data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
> if (IS_ERR(data->pi3usb30532)) {
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index 22d4e8633e30..8dad0428a83c 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -7623,9 +7623,9 @@ static int __init volume_create_alsa_mixer(void)
> data = card->private_data;
> data->card = card;
>
> - strlcpy(card->driver, TPACPI_ALSA_DRVNAME,
> + strscpy(card->driver, TPACPI_ALSA_DRVNAME,
> sizeof(card->driver));
> - strlcpy(card->shortname, TPACPI_ALSA_SHRTNAME,
> + strscpy(card->shortname, TPACPI_ALSA_SHRTNAME,
> sizeof(card->shortname));
> snprintf(card->mixername, sizeof(card->mixername), "ThinkPad EC %s",
> (thinkpad_id.ec_version_str) ?
^ permalink raw reply [flat|nested] 7+ messages in thread