* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 8:24 ` 2.6.24-rc3-mm1 make headers_check fails Kamalesh Babulal
@ 2007-11-21 0:32 ` Andrew Morton
2007-11-21 8:41 ` Kamalesh Babulal
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 0:32 UTC (permalink / raw)
To: Kamalesh Babulal; +Cc: linux-kernel, Andy Whitcroft, Avi Kivity
On Wed, 21 Nov 2007 13:54:50 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> The make headers_check fails,
>
> CHECK include/linux/usb/gadgetfs.h
> CHECK include/linux/usb/ch9.h
> CHECK include/linux/usb/cdc.h
> CHECK include/linux/usb/audio.h
> CHECK include/linux/kvm.h
> /root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires asm/kvm.h, which does not exist in exported headers
hm, works for me, on i386 and x86_64. What's different over there?
^ permalink raw reply [flat|nested] 128+ messages in thread
* 2.6.24-rc3-mm1
@ 2007-11-21 4:45 Andrew Morton
2007-11-21 5:51 ` 2.6.24-rc3-mm1 Dave Young
` (12 more replies)
0 siblings, 13 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 4:45 UTC (permalink / raw)
To: linux-kernel
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
- Added new git tree git-lblnet.patch: net labelling work (Paul Moore
<paul.moore@hp.com)
- Re-added Smack
- Dropped git-kbuild.patch - it broke the scsi build
- I'm offline until Sunday (as are certain other patch targets..)
Boilerplate:
- See the `hot-fixes' directory for any important updates to this patchset.
- To fetch an -mm tree using git, use (for example)
git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1
git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1
- -mm kernel commit activity can be reviewed by subscribing to the
mm-commits mailing list.
echo "subscribe mm-commits" | mail majordomo@vger.kernel.org
- If you hit a bug in -mm and it is not obvious which patch caused it, it is
most valuable if you can perform a bisection search to identify which patch
introduced the bug. Instructions for this process are at
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt
But beware that this process takes some time (around ten rebuilds and
reboots), so consider reporting the bug first and if we cannot immediately
identify the faulty patch, then perform the bisection search.
- When reporting bugs, please try to Cc: the relevant maintainer and mailing
list on any email.
- When reporting bugs in this kernel via email, please also rewrite the
email Subject: in some manner to reflect the nature of the bug. Some
developers filter by Subject: when looking for messages to read.
- Occasional snapshots of the -mm lineup are uploaded to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on
the mm-commits list. These probably are at least compilable.
- More-than-daily -mm snapshots may be found at
http://userweb.kernel.org/~akpm/mmotm/. These are almost certainly not
compileable.
Changes since 2.6.24-rc2-mm1:
origin.patch
git-acpi.patch
git-alsa.patch
git-arm-master.patch
git-arm.patch
git-avr32.patch
git-cifs.patch
git-cpufreq.patch
git-powerpc.patch
git-drm.patch
git-dvb.patch
git-hwmon.patch
git-gfs2-nmw.patch
git-hid.patch
git-hrt.patch
git-ieee1394.patch
git-infiniband.patch
git-input.patch
git-jfs.patch
git-kvm.patch
git-lblnet.patch
git-leds.patch
git-libata-all.patch
git-m32r.patch
git-md-accel.patch
git-mips.patch
git-mmc.patch
git-mtd.patch
git-ubi.patch
git-net.patch
git-netdev-all.patch
git-nfsd.patch
git-ocfs2.patch
git-parisc.patch
git-selinux.patch
git-s390.patch
git-sh.patch
git-scsi-misc.patch
git-scsi-rc-fixes.patch
git-sparc64.patch
git-unionfs.patch
git-v9fs.patch
git-watchdog.patch
git-wireless.patch
git-ipwireless_cs.patch
git-x86.patch
git-newsetup.patch
git-xfs.patch
git-cryptodev.patch
git-xtensa.patch
git trees
-ecryptfs-cast-page-index-to-loff_t-instead-of-off_t.patch
-fix-oops-in-toshiba_acpi-error-return-path.patch
-rtc_hctosys-expects-rtcs-in-utc-doc.patch
-rtcs-handle-nvram-better.patch
-rtc-ds1307-exports-nvram.patch
-drivers-video-ps3fb-fix-memset-size-error.patch
-w1-fix-memset-size-error.patch
-slab-fix-typo-in-allocation-failure-handling.patch
-serial-add-pnp-id-for-davicom-isa-336k-modem.patch
-sysctl-check-length-at-deprecated_sysctl_warning.patch
-cm40x0_csc-fix-debug-macros.patch
-lib-move-bitmapo-from-lib-y-to-obj-y.patch
-uml-fix-symlink-loops.patch
-rtc-tweak-driver-documentation-for-rtc-periodic.patch
-chipsfb-uses-depends-on-pci.patch
-uvesafb-fix-warnings-about-unused-variables-on-non-x86.patch
-oprofile-oops-when-profile_pc-return-0lu.patch
-uml-fix-recvmsg-return-value-checking.patch
-uml-update-address-space-affected-by-pud_clear.patch
-uml-update-address-space-affected-by-pud_clear-checkpatch-fixes.patch
-improve-cgroup-printks.patch
-improve-cgroup-printks-fix.patch
-drivers-video-s1d13xxxfbc-as-module-with-dbg.patch
-forbid-user-to-change-file-flags-on-quota-files.patch
-forbid-user-to-change-file-flags-on-quota-files-fix.patch
-lxfb-use-the-correct-msr-number-for-panel-support.patch
-lguest_userc-fix-memory-leak.patch
-video-sis-fix-negative-array-index.patch
-8250_pnp-add-support-for-lg-c1-express-dual-machines.patch
-proc-fix-proc_kill_inodes-to-kill-dentries-on-all-proc-superblocks.patch
-proc-fix-proc_kill_inodes-to-kill-dentries-on-all-proc-superblocks-checkpatch-fixes.patch
-migration-find-correct-vma-in-new_vma_page.patch
-memory-hotremove-unset-migrate-type-isolate-after-removal.patch
-make-getdelays-cgroupstats-aware.patch
-mm-speed-up-writeback-ramp-up-on-clean-systems.patch
-add-ioresouce_busy-flag-for-system-ram.patch
-acpi-make-acpi_procfs-default-to-y.patch
-spi-fix-double-free-on-spi_unregister_master.patch
-spi-fix-error-paths-on-txx9spi_probe.patch
-paride-pf-driver-fixes.patch
-drivers-misc-move-misplaced-pci_dev_puts.patch
-dmaengine-fix-broken-device-refcounting.patch
-atmel_serial-build-warnings-begone.patch
-hugetlb-follow_hugetlb_page-for-write-access.patch
-hugetlb-follow_hugetlb_page-for-write-access-fix.patch
-raid5-fix-unending-write-sequence.patch
-hugetlb-split-alloc_huge_page-into-private-and-shared-components.patch
-hugetlb-split-alloc_huge_page-into-private-and-shared-components-checkpatch-fixes.patch
-hugetlb-fix-quota-management-for-private-mappings.patch
-hugetlb-debit-quota-in-alloc_huge_page.patch
-hugetlb-allow-bulk-updating-in-hugetlb__quota.patch
-hugetlb-enforce-quotas-during-reservation-for-shared-mappings.patch
-mm-hugetlbc-make-a-function-static.patch
-hugetlb-fix-i_blocks-accounting.patch
-revert-task-control-groups-example-cpu-accounting-subsystem.patch
-fixes-to-the-bfs-filesystem-driver.patch
-linux-kernel-markers-fix-marker-mutex-not-taken-upon-module-load.patch
-linux-kernel-markers-document-format-string.patch
-linux-kernel-markers-fix-samples-to-follow-format-string-standard.patch
-acpi-sbs-fix-retval-warning.patch
-acpi-expose-_sun-in-proc-acpi-processor-info.patch
-powerpc-fix-fs_enet-module-build.patch
-fix-gregkh-driver-kobject-clean-up-rpadlpar-horrid-sysfs-abuse.patch
-jdelvare-i2c-i2c-dev-add-comments.patch
-jdelvare-i2c-i2c-slave-busy-only-if-has-driver.patch
-jdelvare-i2c-i2c-make-i2c_check_addr-static.patch
-jdelvare-i2c-i2c-pasemi-replace-obsolete-driverfs-reference.patch
-jdelvare-i2c-i2c-eeprom-hide-serial-to-non-root-users.patch
-jdelvare-i2c-i2c-eeprom-recognize-vgn-prefix-as-vaio.patch
-jdelvare-i2c-i2c-pasemi-fix-nack-detection.patch
-hwmon-replace-power-of-two-test-in-drivers-hwmon-adt7470c.patch
-cscope-build-warning.patch
-ide-mm-ide-use-drive-select-all-for-req_type_ata_task-in-execute_drive_cmd.patch
-ide-mm-ide-pmac-skip-conservative-pio-downgrade.patch
-ide-mm-ide-add-missing-hob-bit-clearing-to-ide_dump_ata_status.patch
-ide-mm-ide-dont-bug-on-unsupported-transfer-modes.patch
-blk_dev_idecd-help-remove-outdated-note.patch
-remove-references-to-net-modulestxt.patch
-megaraid-sas-convert-aen_mutex-to-the-mutex-api.patch
-update-kerneldoc-comments-in-drivers-scsi-scsicamc.patch
-libsas-convert-sas_proto-users-to-sas_protocol.patch
-libsas-fix-various-sparse-complaints.patch
-unionfs-clear-partial-read.patch
-usb-power-managementtxt-disconnect-clarification.patch
-iwlwifi-remove-unnecessary-code-in-iwl3945-and-iwl4965-drivers.patch
-git-x86-broke-lguest.patch
-git-x86-broke-xen-too.patch
-i386-fix-reboot-with-no-keyboard-attached.patch
-oprofile-op_model_athalonc-support-for-amd-family10h-barcelona-performance-counters.patch
-oprofile-op_model_athalonc-support-for-amd-family10h-barcelona-performance-counters-checkpatch-fixes.patch
-remove-extern-declarations-for-code-data-bss-resource.patch
-x86_64-do-not-clear-cpu_index-set-by-store_cpu_info.patch
-x86-typo-about-sequence-of-cpu_index-and-cpu_online-in.patch
-i386-and-x86_64-randomize-brk.patch
-i386-and-x86_64-randomize-brk-fix.patch
-i386-and-x86_64-randomize-brk-fix-2.patch
-x86-bitops_32h-style-cleanups.patch
-x86-check-boundary-in-count-setup_resource-called-by.patch
-arch-x86-remove-duplicate-includes.patch
-x86-arch_register_cpu-section-fix.patch
-i386-reboot-fixup-for-wrap-2c-board-sc1100-based.patch
-fix-wrong-proc-cpuinfo-on-x64.patch
-x86_64-clean-up-stack-allocation-and-free.patch
-x86_64-configure-stack-size.patch
-ia32-emu-remove-dead-code.patch
-x86_64-add-acpi-reboot-option.patch
-git-cryptodev-hifn_795x-fixes.patch
-xtensa-iss_net_setup-must-be-__init.patch
-i-oat-add-support-for-version-2-of-ioatdma-device.patch
-reiserfs-dont-drop-pg_dirty-when-releasing-sub-page-sized-dirty-file.patch
-rtc-release-correct-region-in-error-path.patch
-rtc-fallback-to-requesting-only-the-ports-we-actually-use.patch
-i5000_edac-no-need-to-__stringify-kbuild_basename.patch
-serial-only-use-pnp-irq-if-its-valid.patch
-sunrpc-xprtrdma-transportc-fix-use-after-free.patch
-fix-mm-utilckrealloc.patch
-fuse_file_alloc-fix-null-dereferences.patch
-tle62x0-driver-stops-ignoring-read-errors.patch
-rd-fix-data-corruption-on-memory-pressure.patch
-cris-gpio-undo-locks-before-returning.patch
-mips-undo-locking-on-error-path-returns.patch
-mips-undo-locking-on-error-path-returns-checkpatch-fixes.patch
-proc-simplify-and-correct-proc_flush_task.patch
-fix-param_sysfs_builtin-name-length-check.patch
-mark-sys_open-sys_read-exports-unused.patch
-sysctl-fix-token-ring-procname.patch
-gbefb-fix-section-mismatch-warnings.patch
-vmstat-fix-section-mismatch-warning.patch
-pidns-place-under-config_experimental.patch
-pidns-place-under-config_experimental-checkpatch-fixes.patch
-__do_irq-does-not-check-irq_disabled-when-irq_per_cpu-is-set.patch
-hibernate-fix-lockdep-report-2.patch
-smbfs-fix-debug-builds.patch
-fix-64kb-blocksize-in-ext3-directories.patch
-fix-64kb-blocksize-in-ext3-directories-checkpatch-fixes.patch
-uml-fix-spurious-irq-testing.patch
-uml-remove-last-include-of-libc-asm-pageh.patch
-uml-fix-build-for-config_tcp.patch
-uml-fix-build-for-config_printk.patch
-swap-delay-accounting-include-lock_page-delays.patch
-file-capabilities-allow-sigcont-within-session-v2.patch
-file-capabilities-allow-sigcont-within-session-v2-checkpatch-fixes.patch
-file-capabilities-allow-sigcont-within-session-v2-file-capabilities-remove-the-non-matching-uid-special-case-for-kill.patch
-feature-removal-schedule-remove-sa_-flags-entry.patch
-kernel-taskstatsc-fix-bogus-nlmsg_free.patch
-x86-show-cpuinfo-only-for-online-cpus.patch
-make-proc-acpi-ac_adapter-dependent-on-acpi_procfs.patch
-acpi-ac-update-ac-state-on-resume.patch
-keyspan-init-termios-properly.patch
-x86-disable-preemption-in-delay_tsc.patch
-oprofile-fix-oops-on-x86-32-bit.patch
-x86-early_quirks-cleanup.patch
-x86-dont-call-mce_create_device-on-cpu_up_prepare.patch
-aic94xx_sds-rename-flash_size.patch
-mips-pcspkr-build-fix.patch
-kernel-power-move-function-prototypes-to-header.patch
-cris-build-fixes-fix-csum_tcpudp_magic-declaration.patch
-cris-build-fixes-add-missing-syscalls.patch
-cris-build-fixes-hardirqh-include-asm-irqh.patch
-cris-build-fixes-atomich-needs-compilerh.patch
-cris-build-fixes-atomich-needs-compilerh-fix.patch
-cris-build-fixes-irq-fixes.patch
-cris-build-fixes-sys_crisc-needs-fsh.patch
-cris-build-fixes-add-baud-rate-defines.patch
-cris-build-fixes-update-eth_v10c-ethernet-driver.patch
-cris-build-fixes-update-eth_v10c-ethernet-driver-fix.patch
-cris-build-fixes-corrected-and-improved-nmi-and-irq-handling.patch
-cris-build-fixes-fixes-in-arch-cris-kernel-timec-checkpatch-fixes.patch
-cris-build-fixes-fixes-in-arch-cris-kernel-timec.patch
-cris-build-fixes-setupc-needs-paramh.patch
-cris-build-fixes-fix-crisksymsc.patch
-cris-build-fixes-defconfig-updates.patch
-cris-array_size-cleanup.patch
-cris-dont-include-bitopsh-in-posix_typesh.patch
-crisv10-serial-driver-rewrite-take-three.patch
-cris-remove-mtd_amstd-and-mtd_obsolete_chips-take-two.patch
-cris-remove-mtd_amstd-and-mtd_obsolete_chips-take-two-checkpatch-fixes.patch
-crisv10-fix-timer-interrupt-parameters.patch
-crisv10-improve-and-bugfix-fasttimer.patch
-crisv32-add-cache-flush-operations.patch
Merged into mainline or a subsystem tree
+update-checkpatchpl-to-version-012.patch
+file-capabilities-allow-sigcont-within-session-v2.patch
+cris-build-fixes-atomich-needs-compilerh.patch
+atmel_spi-labels-gpios-better.patch
+ps3-prefix-all-ps3-specific-kernel-modules-with.patch
+ps3fb-video-memory-size-cleanups.patch
+fix-boot-problem-with-iseries-lacking-hugepage-support.patch
+uml-build-fix.patch
+xen-mask-_page_pcd-from-ptes.patch
+pnp-increase-the-maximum-number-of-resources.patch
+pnp-increase-the-maximum-number-of-resources-fix.patch
+proc-fix-null-i_fop-oops.patch
+wait_task_stopped-dont-use-task_pid_nr_ns-lockless.patch
+proc-remove-races-from-proc_id_readdir.patch
+m68k-export-atari_keyb_init.patch
+amiga-zorro-bus-add-missing-zorro_device_remove.patch
+mac68k-mailing-list-addresss.patch
+tpm-tis-device-driver-locality-request.patch
+termios-document-callback-more-clearly.patch
+s3c24xx-ensure-we-only-configure-valid-gpios.patch
+ipmi-add-the-standard-watchdog-timeout-ioctls.patch
+s3c2410-add-bus-number-to-spi-gpio-driver.patch
+revert-keyspan-init-termios-properly.patch
+memory-hotplug-fix-fix-section-mismatch-in-vmammap_allock_block.patch
+memory-hotplug-x86_64-fix-section-mismatch-in-init_memory_mapping.patch
+fuse-fix-reading-past-eof.patch
+fuse-cleanup-add-fuse_get_attr_version.patch
+fuse-pass-open-flags-to-read-and-write.patch
+fuse-fix-fuse_file_ops-sending.patch
+fuse-fix-uninitialized-field-in-fuse_inode.patch
+fuse-fix-attribute-caching-after-rename.patch
+clone-prepare-to-recycle-clone_detached-and-clone_stopped-fix.patch
2.6.24 queue
-x86_64-efi-boot-support-efi-frame-buffer-v3.patch
Folded into x86_64-efi-boot-support-efi-frame-buffer.patch
+git-acpi-fixup.patch
Fix git-acpi.patch rejects
+agk-dm-dm-merge-max_hw_sector.patch
+agk-dm-dm-crypt-move-queue-functions.patch
device mapper tree updates
+gregkh-driver-kset-convert-to-kobj_sysfs_ops-vs-git-acpi.patch
Fix git-acpi versus driver tree
+intel-agp-enable-i915-recognition.patch
AGP fix
+time-fold-__get_realtime_clock_ts-into-getnstimeofday.patch
cleanup
+qlogic-infinipath-convert-ipath_eep_sem-to-mutex.patch
+fix-build-failure-when-config_infiniband_ipoib_cm-is-not-defined.patch
scsi things
+input-polled-device-timer-rounding.patch
input fix
+pata_sisc-add-packard-bell-easynote-k5305-to-laptops.patch
+ahci-invalid-use-of-writel-readl-with-iomap.patch
+libata-core-list-more-documentation-sources-for-reference.patch
+libata-iordy-handling.patch
+libata-sff-tf_load.patch
+pata_ali-add-mitac-8317-and-derivatives.patch
+pata_ali-lots-of-problems-still-showing-up-with-small-atapi-dma.patch
+pata_hpt37x-fix-cable-detect-bug-spotted-by-sergei.patch
+pata_isapnp-polled-devices.patch
+pata_pcmcia-minor-cleanups-and-support-for-dual-channel-cards.patch
+pata_ninja32-cardbus-ata-initial-support.patch
+libata-add-toshiba-mk1637gsx-to-spurious-command-completion-list.patch
sata/pata things
+ide-mm-sis5513-add-packard-bell-easynote-k5305-to-laptops.patch
+ide-mm-ide-dont-set-pio-mode-on-pre-eide-drives.patch
+ide-mm-siimage-remove-resetproc-method.patch
+ide-mm-ide-skip-ide_wait_not_busy-on-noprobe-disks.patch
+ide-mm-aec62xx-fix-kernel-oops-in-driver-s-probe-function.patch
+ide-mm-serverworks-cleanup-set_dma_mode-method.patch
+ide-mm-ide-disk-add-idedisk_set_doorlock-helper.patch
+ide-mm-ide-hopefully-fix-vdma-for-cs5520.patch
+ide-mm-cy82c693-correct-dma-modes-clipping.patch
+ide-mm-cy82c693-add-set_dma_mode-method.patch
+ide-mm-sgiioc4-add-ide_toggle_bounce-calls.patch
+ide-mm-icside-add-ide_toggle_bounce-calls.patch
+ide-mm-au1xxx-ide-add-ide_toggle_bounce-calls.patch
+ide-mm-ide-remove-ide_dma_on-and-dma_off_quietly-methods-from-ide_hwif_t.patch
+ide-mm-ide-cris-fix-dma-methods.patch
+ide-mm-atiixp-remove-dma_host_on-and-dma_host_off-methods.patch
+ide-mm-ide-move-drive-using_dma-check-to-callers-of-dma_host_on-method.patch
+ide-mm-ide-merge-dma_host_-on-off-methods-into-dma_host_set-method.patch
IDE tree updates
+ide-printk-fix.patch
fix it
+git-mips-fixup.patch
Fix rejects in git-mips.patch
+forcedeth-boot-delay-fix.patch
forcedeth fix
-nfs-stop-sillyname-renames-and-unmounts-from-racing.patch
-nfs-stop-sillyname-renames-and-unmounts-from-racing-fix.patch
-nfs-stop-sillyname-renames-and-unmounts-from-racing-fix-fix.patch
-nfs-stop-sillyname-renames-and-unmounts-from-racing-fix-fix-fix.patch
+nfs-stop-sillyname-renames-and-unmounts-from-racing-2.patch
+nfs-fix-up-problems-with-steves-sillyrename-fix.patch
+nfs-fix-nfs_free_unlinkdata.patch
Updated
-git-nfsd-fixup.patch
Unneeded
+git-nfsd-build-fix.patch
fix git-nfsd
+pci-add-pci-quirk-function-for-some-chipsets.patch
+drivers-pci-quirksc-coding-style-cleanup.patch
+more-sanity-checks-for-dmar.patch
+more-sanity-checks-for-dmar-checkpatch-fixes.patch
PCI updates
+pcie-fix-double-initialization-bug.patch
PCIE fix
+dell-cerc-support-for-megaraid_mbox.patch
scsi fix
+iommu-sg-merging-add-device_dma_parameters-structure.patch
+iommu-sg-merging-pci-add-device_dma_parameters-support.patch
+iommu-sg-merging-x86-make-pci-gart-iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-ppc-make-iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-ia64-make-sba_iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-alpha-make-pci_iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-sparc64-make-iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-parisc-make-iommu-respect-the-segment-size-limits.patch
+iommu-sg-merging-call-blk_queue_segment_boundary-in-__scsi_alloc_queue.patch
+iommu-sg-merging-sata_inic162x-use-pci_set_dma_max_seg_size.patch
+iommu-sg-merging-aacraid-use-pci_set_dma_max_seg_size.patch
iommu work
+ti-3410-5052-usb-serial-convert-td_open_close_lock-to-mutex.patch
USB driver cleanup
+git-x86-fixup.patch
+git-x86-thread_order-borkage.patch
+git-x86-thread_order-borkage-fix.patch
+git-x86-identify_cpu-fix.patch
+git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko.patch
+git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko-checkpatch-fixes.patch
Fixes to gix-x86.patch
+x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2.patch
change x86_64 default memory model
+frv-fix-the-extern-declaration-of-kallsyms_num_syms.patch
+frv-arrange-things-such-that-bra-can-reach-from-the-trap.patch
+add-mike-christie-to-maintainers.patch
+wait_task_stopped-pass-correct-exit_code-to.patch
+isdn-validate-length-of-isdn_net_ioctl_cfgeaz.patch
+tty-add-the-new-termios2-ioctls-to-the-compatible.patch
+acpi-avoid-references-to-impossible-processors.patch
More 2.6.24 queue
+slub-move-kmem_cache_node-determination-into-add_full-and-add_partial-slub-workaround-for-lockdep-confusion.patch
Fix slub-move-kmem_cache_node-determination-into-add_full-and-add_partial.patch
+config_highpte-vs-sub-page-page-tables-fix-2.patch
Fix config_highpte-vs-sub-page-page-tables.patch some more
+vmstat-small-revisions-to-refresh_cpu_vm_stats.patch
+mm-dont-allow-ioremapping-of-ranges-larger-than-vmalloc-space.patch
+page-allocator-get-rid-of-the-list-of-cold-pages.patch
+page-allocator-get-rid-of-the-list-of-cold-pages-fix.patch
+mm-sparsec-check-the-return-value-of-sparse_index_alloc.patch
MM updates
+64bit-capability-support-legacy-support-fix.patch
Fix add-64-bit-capability-support-to-the-kernel.patch som emore
+smack-version-11c-simplified-mandatory-access-control-kernel.patch
smack
+m68knommu-removing-config-variable-dumptoflash.patch
m68knommu update
+pm-qos-remove-locks-around-blocking-notifier.patch
Fix PM qos patches
+m68k-array_size-cleanup.patch
+dio-array_size-cleanup.patch
+m68k-balance-ioremap-and-iounmap-in-m68k-atari-hades-pcic.patch
+nubus-kill-drivers-nubus-nubus_symsc.patch
+m68k-kill-arch-m68k-mac-mac_ksymsc.patch
+m68k-kill-arch-m68k-hp300-ksymsc.patch
+m68k-kill-arch-m68k-amiga-amiga_ksymsc.patch
+m68k-kill-arch-m68k-atari-atari_ksymsc.patch
+m68k-kill-arch-m68k-mvme16x-mvme16x_ksymsc.patch
+mac68k-macii-adb-comment-correction.patch
+mac68k-remove-dead-code.patch
+mac68k-add-nubus-card-definitions-and-a-typo-fix.patch
+mac68k-remove-dead-mac_adbkeycodes.patch
m68k stuff
+uml-arch-um-include-inith-needs-a-definition-of-__used.patch
+uml-improve-detection-of-host-cmov-checkpatch-fixes-fix.patch
+uml-tidy-pgtableh-fix.patch
+uml-remove-unused-variables-in-the-context-switcher.patch
+uml-convert-functions-to-void.patch
+uml-host-tls-diagnostics.patch
+uml-move-um_virt_to_phys.patch
+uml-header-untangling.patch
+uml-style-cleanup.patch
+uml-currenth-cleanup.patch
+uml-fix-page-table-data-sizes.patch
+uml-add-virt_to_pte.patch
+uml-simplify-sigsegv-handling.patch
+uml-use-ptrace-directly-in-libc-code.patch
+uml-kill-processes-instead-of-panicing-kernel.patch
+uml-add-missing-space.patch
UML updates
-procfs-detect-duplicate-names.patch
Updated
+use-__set_task_state-for-traced-stopped-tasks.patch
cleanup
+genericizing-iova-fix.patch
Fix genericizing-iova.patch
-mm-fix-blkdev-size-calculation-in-generic_write_checks.patch
Dropped
+fs-remove-dead-config-config_has_compat_epoll_event-symbol.patch
+alpha-parisc-removing-config-variable-debug_rwlock.patch
+document-i_sync-and-i_datasync.patch
+ps3-checkpatch-drivers-ps3-ps3-sys-managerc.patch
+ps3-checkpatch-drivers-ps3-ps3-vuartc.patch
+percpu-__percpu_alloc_mask-can-dynamically-size-percpu_data.patch
+i-oat-fixups-from-code-comments.patch
+printkc-use-unsigned-ints-instead-of-longs-for-logbuf-index.patch
+tpmc-fix-crash-during-device-removal.patch
+a-few-corrections-to-include-linux-kbuild.patch
+vt-bitlock-fix.patch
+avoid-divide-in-is_align.patch
+do_wait-remove-one-else-if-branch.patch
Misc
+atmel_spi-throughput-improvement.patch
+atmel_spi-chain-dma-transfers.patch
SPI updates
+gigaset-clean-up-urb-status-usage.patch
+gigaset-code-cleanups.patch
+bas_gigaset-suspend-support-v2.patch
+usb_gigaset-suspend-support-v3.patch
+gigaset-atomic-cleanup.patch
ISDN
+rtc-ds1302-rtc-support.patch
+rtc-ds1302-rtc-support-checkpatch-fixes.patch
RTC updates
+generic-gpio-gpio_chip-support-gpiolib-locking-simplified.patch
Fix generic-gpio-gpio_chip-support.patch
+add-buffer-head-related-helper-functions.patch
+ext2-add-block-bitmap-validation.patch
+ext3-add-block-bitmap-validation.patch
+ext4-add-block-bitmap-validation.patch
+ext4-add-block-bitmap-validation-fix.patch
ext2/3/4 runtie checks
-ridiculous-ext3-costs-was-re-page-fault-costs.patch
Dropped
-nfsd-fix-wrong-mnt_writer-count-in-rename.patch
Obsolete
+iget-stop-bfs-from-using-iget-and-read_inode-try-fix.patch
Fix iget-stop-bfs-from-using-iget-and-read_inode-try.patch
+add-dma-engine-driver-for-freescale-mpc85xx-processors-fix-fix.patch
Fix add-dma-engine-driver-for-freescale-mpc85xx-processors.patch
+embed-a-struct-path-into-struct-nameidata-instead-of-nd-dentrymnt-nfs4-fix.patch
Fix embed-a-struct-path-into-struct-nameidata-instead-of-nd-dentrymnt.patch
+use-struct-path-in-struct-svc_export-nfsd-fix-wrong-mnt_writer-count-in-rename.patch
Fix use-struct-path-in-struct-svc_export.patch some more
-suppress-aout-library-support-if-config_binfmt_aout.patch
-suppress-aout-library-support-if-config_binfmt_aout-checkpatch-fixes.patch
-usb-net2280-cant-have-a-function-called.patch
-usb-net2280-cant-have-a-function-called-checkpatch-fixes.patch
-mn10300-allocate-serial-port-uart-ids-for-on-chip-serial.patch
-mn10300-add-the-mn10300-am33-architecture-to-the-kernel.patch
-mn10300-add-the-mn10300-am33-architecture-to-the-kernel-fix.patch
-mn10300-add-the-mn10300-am33-architecture-to-the-kernel-ia64-fix.patch
Dropped
+add-the-namespaces-config-option.patch
+move-the-uts-namespace-under-uts_ns-option.patch
+move-the-ipc-namespace-under-ipc_ns-option.patch
+cleanup-the-code-managed-with-the-user_ns-option.patch
+cleanup-the-code-managed-with-the-user_ns-option-checkpatch-fixes.patch
+cleanup-the-code-managed-with-pid_ns-option.patch
+cleanup-the-code-managed-with-pid_ns-option-checkpatch-fixes.patch
+mark-net_ns-with-depends-on-namespaces.patch
Namespace updates
+proc-remove-module_license.patch
+proc-less-lock-operations-during-lookup.patch
+proc-simplify-function-prototypes.patch
+proc-remove-useless-check-on-symlink-removal.patch
+proc-remove-useless-checks-in-proc_register.patch
+proc-detect-duplicate-names-on-registration.patch
+proc-detect-duplicate-names-on-registration-fix.patch
+proc-implement-proc_single_file_operations.patch
+proc-rewrite-do_task_stat-to-correctly-handle-pid-namespaces.patch
+proc-seqfile-convert-proc_pid_statm.patch
+proc-proper-pidns-handling-for-proc-self.patch
procfs maintenance
+intel-iommu-pmen-support.patch
+intel-iommu-fault_reason_index_cleanuppatch.patch
+intel-iommu-fault_reason_index_cleanuppatch-fix.patch
Intel IOMMU updates
+tty-let-architectures-override-the-user-kernel-macros.patch
+tty-s390-support-for-termios2.patch
+moxa-first-pass-at-termios-reporting.patch
+n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch
+rocket-first-pass-at-termios-reporting.patch
+rocket-dont-let-random-users-reset-the-controller.patch
+tty_audit-fix-checkpatch-complaint.patch
+tty_io-drag-screaming-into-coding-style-compliance.patch
+tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch
+8250_early-coding-style.patch
+8250_gsc-coding-style.patch
+8250_hp300-coding-style.patch
+8250_hub6-codding-style.patch
+8250_pci-coding-style.patch
+serial8250-coding-style.patch
+8250-enable-rate-reporting-via-termios.patch
+serial_core-bring-mostly-into-line-with-coding-style.patch
tty/serial driver updates
3200 commits in 1255 patch files
All patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/patch-list
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
@ 2007-11-21 5:51 ` Dave Young
2007-11-21 6:00 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-21 5:56 ` 2.6.24-rc3-mm1 - Build Failure on S390x Kamalesh Babulal
` (11 subsequent siblings)
12 siblings, 1 reply; 128+ messages in thread
From: Dave Young @ 2007-11-21 5:51 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Hi, andrew
modpost failed for me:
MODPOST 360 modules
ERROR: "empty_zero_page" [drivers/kvm/kvm.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
Regards
dave
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Build Failure on S390x
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
2007-11-21 5:51 ` 2.6.24-rc3-mm1 Dave Young
@ 2007-11-21 5:56 ` Kamalesh Babulal
2007-11-21 6:04 ` Andrew Morton
2007-11-21 5:58 ` 2.6.24-rc3-mm1 KAMEZAWA Hiroyuki
` (10 subsequent siblings)
12 siblings, 1 reply; 128+ messages in thread
From: Kamalesh Babulal @ 2007-11-21 5:56 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, linux390, linux-s390, schwidefsky, Andy Whitcroft
Hi Andrew,
The kernel build fails on S390x, with
arch/s390/kernel/ipl.c: In function `ipl_register_fcp_files':
arch/s390/kernel/ipl.c:415: error: `ipl_subsys' undeclared (first use in this function)
arch/s390/kernel/ipl.c:415: error: (Each undeclared identifier is reported only once
arch/s390/kernel/ipl.c:415: error: for each function it appears in.)
arch/s390/kernel/ipl.c: In function `ipl_init':
arch/s390/kernel/ipl.c:449: error: implicit declaration of function `firmware_register'
arch/s390/kernel/ipl.c:449: error: `ipl_subsys' undeclared (first use in this function)
arch/s390/kernel/ipl.c: In function `on_panic_show':
arch/s390/kernel/ipl.c:764: error: implicit declaration of function `shutdown_action_str'
arch/s390/kernel/ipl.c:764: error: `on_panic_action' undeclared (first use in this function)
arch/s390/kernel/ipl.c:764: warning: format argument is not a pointer (arg 3)
arch/s390/kernel/ipl.c:764: warning: format argument is not a pointer (arg 3)
arch/s390/kernel/ipl.c: In function `on_panic_store':
arch/s390/kernel/ipl.c:771: error: `SHUTDOWN_REIPL_STR' undeclared (first use in this function)
arch/s390/kernel/ipl.c:772: error: `on_panic_action' undeclared (first use in this function)
arch/s390/kernel/ipl.c:772: error: `SHUTDOWN_REIPL' undeclared (first use in this function)
arch/s390/kernel/ipl.c:773: error: `SHUTDOWN_DUMP_STR' undeclared (first use in this function)
arch/s390/kernel/ipl.c:775: error: `SHUTDOWN_DUMP' undeclared (first use in this function)
arch/s390/kernel/ipl.c:776: error: `SHUTDOWN_STOP_STR' undeclared (first use in this function)
arch/s390/kernel/ipl.c:778: error: `SHUTDOWN_STOP' undeclared (first use in this function)
arch/s390/kernel/ipl.c: At top level:
arch/s390/kernel/ipl.c:879: error: redefinition of 'ipl_register_fcp_files'
arch/s390/kernel/ipl.c:412: error: previous definition of 'ipl_register_fcp_files' was here
arch/s390/kernel/ipl.c:904: error: redefinition of 'ipl_init'
arch/s390/kernel/ipl.c:446: error: previous definition of 'ipl_init' was here
arch/s390/kernel/ipl.c:1050: error: `reipl_run' undeclared here (not in a function)
arch/s390/kernel/ipl.c:1050: error: initializer element is not constant
arch/s390/kernel/ipl.c:1050: error: (near initialization for `reipl_action.fn')
arch/s390/kernel/ipl.c:1058: error: redefinition of 'sys_dump_fcp_wwpn_show'
arch/s390/kernel/ipl.c:662: error: previous definition of 'sys_dump_fcp_wwpn_show' was here
arch/s390/kernel/ipl.c:1058: error: redefinition of 'sys_dump_fcp_wwpn_store'
arch/s390/kernel/ipl.c:662: error: previous definition of 'sys_dump_fcp_wwpn_store' was here
arch/s390/kernel/ipl.c:1058: error: redefinition of 'sys_dump_fcp_wwpn_attr'
arch/s390/kernel/ipl.c:662: error: previous definition of 'sys_dump_fcp_wwpn_attr' was here
arch/s390/kernel/ipl.c:1060: error: redefinition of 'sys_dump_fcp_lun_show'
arch/s390/kernel/ipl.c:664: error: previous definition of 'sys_dump_fcp_lun_show' was here
arch/s390/kernel/ipl.c:1060: error: redefinition of 'sys_dump_fcp_lun_store'
arch/s390/kernel/ipl.c:664: error: previous definition of 'sys_dump_fcp_lun_store' was here
arch/s390/kernel/ipl.c:1060: error: redefinition of 'sys_dump_fcp_lun_attr'
arch/s390/kernel/ipl.c:664: error: previous definition of 'sys_dump_fcp_lun_attr' was here
arch/s390/kernel/ipl.c:1062: error: redefinition of 'sys_dump_fcp_bootprog_show'
arch/s390/kernel/ipl.c:666: error: previous definition of 'sys_dump_fcp_bootprog_show' was here
arch/s390/kernel/ipl.c:1062: error: redefinition of 'sys_dump_fcp_bootprog_store'
arch/s390/kernel/ipl.c:666: error: previous definition of 'sys_dump_fcp_bootprog_store' was here
arch/s390/kernel/ipl.c:1062: error: redefinition of 'sys_dump_fcp_bootprog_attr'
arch/s390/kernel/ipl.c:666: error: previous definition of 'sys_dump_fcp_bootprog_attr' was here
arch/s390/kernel/ipl.c:1064: error: redefinition of 'sys_dump_fcp_br_lba_show'
arch/s390/kernel/ipl.c:668: error: previous definition of 'sys_dump_fcp_br_lba_show' was here
arch/s390/kernel/ipl.c:1064: error: redefinition of 'sys_dump_fcp_br_lba_store'
arch/s390/kernel/ipl.c:668: error: previous definition of 'sys_dump_fcp_br_lba_store' was here
arch/s390/kernel/ipl.c:1064: error: redefinition of 'sys_dump_fcp_br_lba_attr'
arch/s390/kernel/ipl.c:668: error: previous definition of 'sys_dump_fcp_br_lba_attr' was here
arch/s390/kernel/ipl.c:1066: error: redefinition of 'sys_dump_fcp_device_show'
arch/s390/kernel/ipl.c:670: error: previous definition of 'sys_dump_fcp_device_show' was here
arch/s390/kernel/ipl.c:1066: error: redefinition of 'sys_dump_fcp_device_store'
arch/s390/kernel/ipl.c:670: error: previous definition of 'sys_dump_fcp_device_store' was here
arch/s390/kernel/ipl.c:1066: error: redefinition of 'sys_dump_fcp_device_attr'
arch/s390/kernel/ipl.c:670: error: previous definition of 'sys_dump_fcp_device_attr' was here
arch/s390/kernel/ipl.c:1069: error: redefinition of 'dump_fcp_attrs'
arch/s390/kernel/ipl.c:673: error: previous definition of 'dump_fcp_attrs' was here
arch/s390/kernel/ipl.c:1078: error: redefinition of 'dump_fcp_attr_group'
arch/s390/kernel/ipl.c:682: error: previous definition of 'dump_fcp_attr_group' was here
arch/s390/kernel/ipl.c:1085: error: redefinition of 'sys_dump_ccw_device_show'
arch/s390/kernel/ipl.c:689: error: previous definition of 'sys_dump_ccw_device_show' was here
arch/s390/kernel/ipl.c:1085: error: redefinition of 'sys_dump_ccw_device_store'
arch/s390/kernel/ipl.c:689: error: previous definition of 'sys_dump_ccw_device_store' was here
arch/s390/kernel/ipl.c:1085: error: redefinition of 'sys_dump_ccw_device_attr'
arch/s390/kernel/ipl.c:689: error: previous definition of 'sys_dump_ccw_device_attr' was here
arch/s390/kernel/ipl.c:1088: error: redefinition of 'dump_ccw_attrs'
arch/s390/kernel/ipl.c:692: error: previous definition of 'dump_ccw_attrs' was here
arch/s390/kernel/ipl.c:1093: error: redefinition of 'dump_ccw_attr_group'
arch/s390/kernel/ipl.c:697: error: previous definition of 'dump_ccw_attr_group' was here
arch/s390/kernel/ipl.c:1101: error: redefinition of 'dump_set_type'
arch/s390/kernel/ipl.c:705: error: previous definition of 'dump_set_type' was here
arch/s390/kernel/ipl.c:1122: error: conflicting types for 'dump_type_show'
arch/s390/kernel/ipl.c:729: error: previous definition of 'dump_type_show' was here
arch/s390/kernel/ipl.c:1128: error: conflicting types for 'dump_type_store'
arch/s390/kernel/ipl.c:736: error: previous definition of 'dump_type_store' was here
arch/s390/kernel/ipl.c:1140: error: variable `dump_type_attr' has initializer but incomplete type
arch/s390/kernel/ipl.c:1140: error: conflicting types for 'dump_type_attr'
arch/s390/kernel/ipl.c:748: error: previous definition of 'dump_type_attr' was here
arch/s390/kernel/ipl.c:1141: error: unknown field `attr' specified in initializer
arch/s390/kernel/ipl.c:1141: error: extra brace group at end of initializer
arch/s390/kernel/ipl.c:1141: error: (near initialization for `dump_type_attr')
arch/s390/kernel/ipl.c:1141: warning: excess elements in struct initializer
arch/s390/kernel/ipl.c:1141: warning: (near initialization for `dump_type_attr')
arch/s390/kernel/ipl.c:1141: error: unknown field `show' specified in initializer
arch/s390/kernel/ipl.c:1141: warning: excess elements in struct initializer
arch/s390/kernel/ipl.c:1141: warning: (near initialization for `dump_type_attr')
arch/s390/kernel/ipl.c:1141: error: unknown field `store' specified in initializer
arch/s390/kernel/ipl.c:1141: warning: excess elements in struct initializer
arch/s390/kernel/ipl.c:1141: warning: (near initialization for `dump_type_attr')
arch/s390/kernel/ipl.c:1143: error: syntax error before '(' token
arch/s390/kernel/ipl.c: In function `dump_init':
arch/s390/kernel/ipl.c:1231: warning: passing arg 2 of `sysfs_create_file' from incompatible pointer type
arch/s390/kernel/ipl.c: In function `shutdown_actions_init':
arch/s390/kernel/ipl.c:1254: warning: passing arg 2 of `sysfs_create_file' from incompatible pointer type
arch/s390/kernel/ipl.c:1260: error: `shutdown_on_panic_nb' undeclared (first use in this function)
arch/s390/kernel/ipl.c: At top level:
arch/s390/kernel/ipl.c:237: warning: 'get_ipl_type' defined but not used
arch/s390/kernel/ipl.c:477: warning: 'ipl_action' defined but not used
arch/s390/kernel/ipl.c:682: warning: 'dump_fcp_attr_group' defined but not used
arch/s390/kernel/ipl.c:697: warning: 'dump_ccw_attr_group' defined but not used
arch/s390/kernel/ipl.c:748: warning: 'dump_type_attr' defined but not used
arch/s390/kernel/ipl.c:843: warning: 'do_dump' defined but not used
arch/s390/kernel/ipl.c:1049: warning: 'reipl_action' defined but not used
arch/s390/kernel/ipl.c:1146: warning: 'dump_run' defined but not used
make[1]: *** [arch/s390/kernel/ipl.o] Error 1
make: *** [arch/s390/kernel] Error 2
11/21/2007-06:02:16 Build the kernel. Failed rc = 2
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
2007-11-21 5:51 ` 2.6.24-rc3-mm1 Dave Young
2007-11-21 5:56 ` 2.6.24-rc3-mm1 - Build Failure on S390x Kamalesh Babulal
@ 2007-11-21 5:58 ` KAMEZAWA Hiroyuki
2007-11-21 6:08 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-21 6:11 ` 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC Kamalesh Babulal
` (9 subsequent siblings)
12 siblings, 1 reply; 128+ messages in thread
From: KAMEZAWA Hiroyuki @ 2007-11-21 5:58 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
I met.
CHK include/linux/version.h
CHK include/linux/utsrelease.h
CALL scripts/checksyscalls.sh
<stdin>:1389:2: warning: #warning syscall revokeat not implemented
<stdin>:1393:2: warning: #warning syscall frevoke not implemented
CHK include/linux/compile.h
make[1]: *** No rule to make target `arch/ia64/lib/copy_page-export.o', needed by `arch/ia64/lib/built-in.o'. Stop.
make: *** [arch/ia64/lib] Error 2
fix (for my config ?) is attached.
=
This was necessary to build.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
arch/ia64/lib/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux-2.6.24-rc3-mm1/arch/ia64/lib/Makefile
===================================================================
--- linux-2.6.24-rc3-mm1.orig/arch/ia64/lib/Makefile
+++ linux-2.6.24-rc3-mm1/arch/ia64/lib/Makefile
@@ -2,7 +2,7 @@
# Makefile for ia64-specific library routines..
#
-obj-y := io.o copy_page-export.o
+obj-y := io.o
lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \
__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o \
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 5:51 ` 2.6.24-rc3-mm1 Dave Young
@ 2007-11-21 6:00 ` Andrew Morton
2007-11-21 6:03 ` 2.6.24-rc3-mm1 Dave Young
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 6:00 UTC (permalink / raw)
To: Dave Young; +Cc: linux-kernel
On Wed, 21 Nov 2007 13:51:47 +0800 "Dave Young" <hidave.darkstar@gmail.com> wrote:
> Hi, andrew
>
> modpost failed for me:
> MODPOST 360 modules
> ERROR: "empty_zero_page" [drivers/kvm/kvm.ko] undefined!
> make[1]: *** [__modpost] Error 1
> make: *** [modules] Error 2
>
You're a victim of the hasty unexporting fad. Which architecture?
x86_64 I guess?
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 6:00 ` 2.6.24-rc3-mm1 Andrew Morton
@ 2007-11-21 6:03 ` Dave Young
2007-11-21 6:15 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-26 18:48 ` 2.6.24-rc3-mm1 Rik van Riel
0 siblings, 2 replies; 128+ messages in thread
From: Dave Young @ 2007-11-21 6:03 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Nov 21, 2007 2:00 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> On Wed, 21 Nov 2007 13:51:47 +0800 "Dave Young" <hidave.darkstar@gmail.com> wrote:
>
> > Hi, andrew
> >
> > modpost failed for me:
> > MODPOST 360 modules
> > ERROR: "empty_zero_page" [drivers/kvm/kvm.ko] undefined!
> > make[1]: *** [__modpost] Error 1
> > make: *** [modules] Error 2
> >
>
> You're a victim of the hasty unexporting fad. Which architecture?
> x86_64 I guess?
>
Hi,
ia32 instead.
Regards
dave
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Build Failure on S390x
2007-11-21 5:56 ` 2.6.24-rc3-mm1 - Build Failure on S390x Kamalesh Babulal
@ 2007-11-21 6:04 ` Andrew Morton
0 siblings, 0 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 6:04 UTC (permalink / raw)
To: Kamalesh Babulal
Cc: linux-kernel, linux390, linux-s390, schwidefsky, Andy Whitcroft
On Wed, 21 Nov 2007 11:26:51 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> The kernel build fails on S390x, with
Yes, sorry, I forgot to mention that. I got a large patch reject
between Greg's driver tree and the s390 tree and I couldn't be bothered
fixing it. s390 is busted in 2.6.24-rc3-mm1.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 5:58 ` 2.6.24-rc3-mm1 KAMEZAWA Hiroyuki
@ 2007-11-21 6:08 ` Andrew Morton
2007-11-21 12:49 ` 2.6.24-rc3-mm1 Rene Herman
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 6:08 UTC (permalink / raw)
To: KAMEZAWA Hiroyuki; +Cc: linux-kernel
On Wed, 21 Nov 2007 14:58:38 +0900 KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> I met.
>
> CHK include/linux/version.h
> CHK include/linux/utsrelease.h
> CALL scripts/checksyscalls.sh
> <stdin>:1389:2: warning: #warning syscall revokeat not implemented
> <stdin>:1393:2: warning: #warning syscall frevoke not implemented
> CHK include/linux/compile.h
> make[1]: *** No rule to make target `arch/ia64/lib/copy_page-export.o', needed by `arch/ia64/lib/built-in.o'. Stop.
> make: *** [arch/ia64/lib] Error 2
>
> fix (for my config ?) is attached.
>
> =
> This was necessary to build.
>
> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
>
> arch/ia64/lib/Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Index: linux-2.6.24-rc3-mm1/arch/ia64/lib/Makefile
> ===================================================================
> --- linux-2.6.24-rc3-mm1.orig/arch/ia64/lib/Makefile
> +++ linux-2.6.24-rc3-mm1/arch/ia64/lib/Makefile
> @@ -2,7 +2,7 @@
> # Makefile for ia64-specific library routines..
> #
>
> -obj-y := io.o copy_page-export.o
> +obj-y := io.o
>
> lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \
> __divdi3.o __udivdi3.o __moddi3.o __umoddi3.o \
erp. Actually, it should be this:
--- a/arch/ia64/lib/Makefile~ia64-export-copy_page-to-modules-fix-fix
+++ a/arch/ia64/lib/Makefile
@@ -2,7 +2,7 @@
# Makefile for ia64-specific library routines..
#
-obj-y := io.o copy_page-export.o
+obj-y := io.o
lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \
__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o \
_
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (2 preceding siblings ...)
2007-11-21 5:58 ` 2.6.24-rc3-mm1 KAMEZAWA Hiroyuki
@ 2007-11-21 6:11 ` Kamalesh Babulal
2007-11-21 6:18 ` Andrew Morton
2007-11-21 8:06 ` 2.6.24-rc3-mm1- powerpc link failure Kamalesh Babulal
` (8 subsequent siblings)
12 siblings, 1 reply; 128+ messages in thread
From: Kamalesh Babulal @ 2007-11-21 6:11 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Andy Whitcroft, Balbir Singh
Hi Andrew,
Kernel panic's across different architectures like powerpc, x86_64,
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
..MP-BIOS bug: 8254 timer not connected to IO-APIC
Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 6:03 ` 2.6.24-rc3-mm1 Dave Young
@ 2007-11-21 6:15 ` Andrew Morton
2007-11-21 6:22 ` 2.6.24-rc3-mm1 Dave Young
2007-11-21 18:35 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
2007-11-26 18:48 ` 2.6.24-rc3-mm1 Rik van Riel
1 sibling, 2 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 6:15 UTC (permalink / raw)
To: Dave Young; +Cc: linux-kernel, Avi Kivity, Thomas Gleixner, Ingo Molnar
On Wed, 21 Nov 2007 14:03:34 +0800 "Dave Young" <hidave.darkstar@gmail.com> wrote:
> On Nov 21, 2007 2:00 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > On Wed, 21 Nov 2007 13:51:47 +0800 "Dave Young" <hidave.darkstar@gmail.com> wrote:
> >
> > > Hi, andrew
> > >
> > > modpost failed for me:
> > > MODPOST 360 modules
> > > ERROR: "empty_zero_page" [drivers/kvm/kvm.ko] undefined!
> > > make[1]: *** [__modpost] Error 1
> > > make: *** [modules] Error 2
> > >
> >
> > You're a victim of the hasty unexporting fad. Which architecture?
> > x86_64 I guess?
> >
> Hi,
> ia32 instead.
>
oic. Like this, I guess.
--- a/arch/x86/kernel/i386_ksyms_32.c~git-x86-i386-export-empty_zero_page
+++ a/arch/x86/kernel/i386_ksyms_32.c
@@ -2,6 +2,7 @@
#include <asm/semaphore.h>
#include <asm/checksum.h>
#include <asm/desc.h>
+#include <asm/pgtable.h>
EXPORT_SYMBOL(__down_failed);
EXPORT_SYMBOL(__down_failed_interruptible);
@@ -22,3 +23,4 @@ EXPORT_SYMBOL(__put_user_8);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(empty_zero_page);
_
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 6:11 ` 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC Kamalesh Babulal
@ 2007-11-21 6:18 ` Andrew Morton
2007-11-21 9:22 ` Kamalesh Babulal
` (3 more replies)
0 siblings, 4 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 6:18 UTC (permalink / raw)
To: Kamalesh Babulal
Cc: linux-kernel, Andy Whitcroft, Balbir Singh, linux-acpi,
Thomas Gleixner, Ingo Molnar
On Wed, 21 Nov 2007 11:41:23 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> Hi Andrew,
>
> Kernel panic's across different architectures like powerpc, x86_64,
powerpc complains about IO-APICs??
> Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
> Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
> Mount-cache hash table entries: 256
> SMP alternatives: switching to UP code
> ACPI: Core revision 20070126
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
ACPI or x86 breakage, I guess.
Did 'noapic' work?
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 6:15 ` 2.6.24-rc3-mm1 Andrew Morton
@ 2007-11-21 6:22 ` Dave Young
2007-11-21 18:35 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
1 sibling, 0 replies; 128+ messages in thread
From: Dave Young @ 2007-11-21 6:22 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Avi Kivity, Thomas Gleixner, Ingo Molnar
On Nov 21, 2007 2:15 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> On Wed, 21 Nov 2007 14:03:34 +0800 "Dave Young" <hidave.darkstar@gmail.com> wrote:
>
> > On Nov 21, 2007 2:00 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
> > >
> > > On Wed, 21 Nov 2007 13:51:47 +0800 "Dave Young" <hidave.darkstar@gmail.com> wrote:
> > >
> > > > Hi, andrew
> > > >
> > > > modpost failed for me:
> > > > MODPOST 360 modules
> > > > ERROR: "empty_zero_page" [drivers/kvm/kvm.ko] undefined!
> > > > make[1]: *** [__modpost] Error 1
> > > > make: *** [modules] Error 2
> > > >
> > >
> > > You're a victim of the hasty unexporting fad. Which architecture?
> > > x86_64 I guess?
> > >
> > Hi,
> > ia32 instead.
> >
>
> oic. Like this, I guess.
>
> --- a/arch/x86/kernel/i386_ksyms_32.c~git-x86-i386-export-empty_zero_page
> +++ a/arch/x86/kernel/i386_ksyms_32.c
> @@ -2,6 +2,7 @@
> #include <asm/semaphore.h>
> #include <asm/checksum.h>
> #include <asm/desc.h>
> +#include <asm/pgtable.h>
>
> EXPORT_SYMBOL(__down_failed);
> EXPORT_SYMBOL(__down_failed_interruptible);
> @@ -22,3 +23,4 @@ EXPORT_SYMBOL(__put_user_8);
> EXPORT_SYMBOL(strstr);
>
> EXPORT_SYMBOL(csum_partial);
> +EXPORT_SYMBOL(empty_zero_page);
> _
>
Yes, passed :)
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1- powerpc link failure
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (3 preceding siblings ...)
2007-11-21 6:11 ` 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC Kamalesh Babulal
@ 2007-11-21 8:06 ` Kamalesh Babulal
2007-11-21 22:52 ` Stephen Rothwell
2007-11-21 8:24 ` 2.6.24-rc3-mm1 make headers_check fails Kamalesh Babulal
` (7 subsequent siblings)
12 siblings, 1 reply; 128+ messages in thread
From: Kamalesh Babulal @ 2007-11-21 8:06 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, sfr, linuxppc-dev, Andy Whitcroft, Balbir Singh
Hi Andrew,
The kernel build fails on powerpc while linking,
AS .tmp_kallsyms3.o
LD vmlinux.o
ld: TOC section size exceeds 64k
make: *** [vmlinux.o] Error 1
The patch posted at http://lkml.org/lkml/2007/11/13/414, solves this
failure.
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (4 preceding siblings ...)
2007-11-21 8:06 ` 2.6.24-rc3-mm1- powerpc link failure Kamalesh Babulal
@ 2007-11-21 8:24 ` Kamalesh Babulal
2007-11-21 0:32 ` Andrew Morton
2007-11-21 8:42 ` 2.6.24-rc3-mm1 (sync is slow ?) KAMEZAWA Hiroyuki
` (6 subsequent siblings)
12 siblings, 1 reply; 128+ messages in thread
From: Kamalesh Babulal @ 2007-11-21 8:24 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Andy Whitcroft
Hi Andrew,
The make headers_check fails,
CHECK include/linux/usb/gadgetfs.h
CHECK include/linux/usb/ch9.h
CHECK include/linux/usb/cdc.h
CHECK include/linux/usb/audio.h
CHECK include/linux/kvm.h
/root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires asm/kvm.h, which does not exist in exported headers
make[2]: *** [/root/kernels/linux-2.6.24-rc3/usr/include/linux/.check.kvm.h] Error 1
make[1]: *** [linux] Error 2
make: *** [headers_check] Error 2
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 0:32 ` Andrew Morton
@ 2007-11-21 8:41 ` Kamalesh Babulal
2007-11-21 8:44 ` Avi Kivity
0 siblings, 1 reply; 128+ messages in thread
From: Kamalesh Babulal @ 2007-11-21 8:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Andy Whitcroft, Avi Kivity
Andrew Morton wrote:
> On Wed, 21 Nov 2007 13:54:50 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>
>> The make headers_check fails,
>>
>> CHECK include/linux/usb/gadgetfs.h
>> CHECK include/linux/usb/ch9.h
>> CHECK include/linux/usb/cdc.h
>> CHECK include/linux/usb/audio.h
>> CHECK include/linux/kvm.h
>> /root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires asm/kvm.h, which does not exist in exported headers
>
> hm, works for me, on i386 and x86_64. What's different over there?
Hi Andrew,
It fails on the powerpc box, with allyesconfig option.
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 (sync is slow ?)
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (5 preceding siblings ...)
2007-11-21 8:24 ` 2.6.24-rc3-mm1 make headers_check fails Kamalesh Babulal
@ 2007-11-21 8:42 ` KAMEZAWA Hiroyuki
2007-11-21 8:49 ` Andrew Morton
2007-11-21 8:49 ` KAMEZAWA Hiroyuki
2007-11-21 18:23 ` 2.6.24-rc3-mm1: usb mouse doesn't work Kirill A. Shutemov
` (5 subsequent siblings)
12 siblings, 2 replies; 128+ messages in thread
From: KAMEZAWA Hiroyuki @ 2007-11-21 8:42 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1035 bytes --]
Hi, Andrew
I got following result in 'sync' command.
It was too slow. (memory controller config is off ;)
I attaches my .config.
==
[2.6.24-rc3-mm1]
[kamezawa@dr-test2 ~]$ dd if=/dev/zero of=./tmpfile bs=4096 count=100000
100000+0 records in
100000+0 records out
409600000 bytes (410 MB) copied, 1.46706 seconds, 279 MB/s
[kamezawa@dr-test2 ~]$ time sync
real 3m6.440s
user 0m0.000s
sys 0m0.133s
on, 2.6.23-rc2-mm1, 2.6.23-rc3 there was no problem.
==
[2.6.24-rc3]
[kamezawa@dr-test2 ~]$ dd if=/dev/zero of=tmpfile bs=4096 count=100000
100000+0 records in
100000+0 records out
409600000 bytes (410 MB) copied, 2.07717 seconds, 197 MB/s
[kamezawa@dr-test2 ~]$ time sync
real 0m9.935s
user 0m0.001s
sys 0m0.113s
[2.6.24-rc3]
[kamezawa@dr-test2 ~]$ dd if=/dev/zero of=./tmpfile bs=4096 count=100000
100000+0 records in
100000+0 records out
409600000 bytes (410 MB) copied, 1.37147 seconds, 299 MB/s
[kamezawa@dr-test2 ~]$ time sync[2.6.24-rc2-mm1]
real 0m11.718s
user 0m0.000s
sys 0m0.138s
==
-Kame
[-- Attachment #2: myconfig --]
[-- Type: application/octet-stream, Size: 47498 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc3-mm1
# Wed Nov 21 17:18:24 2007
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_FAIR_USER_SCHED is not set
CONFIG_FAIR_CGROUP_SCHED=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_CGROUP_MEM_CONT is not set
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_AUDIT_ARCH=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
# CONFIG_PGTABLE_3 is not set
CONFIG_PGTABLE_4=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_IA64_SGI_SN_XP=m
CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=1024
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PERMIT_BSP_REMOVE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
# CONFIG_IA32_SUPPORT is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_IA64_MCA_RECOVERY=m
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set
#
# SN Devices
#
CONFIG_SGI_IOC3=m
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_IA64_ACPI_CPUFREQ=m
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_HOTPLUG_PCI_SGI=m
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
# CONFIG_IEEE80211_CRYPT_TKIP is not set
CONFIG_IEEE80211_SOFTMAC=m
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=m
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
# CONFIG_FIXED_MII_1000_FDX is not set
CONFIG_FIXED_MII_AMNT=1
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
# CONFIG_B44 is not set
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
# CONFIG_SUNDANCE is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
# CONFIG_SC92031 is not set
CONFIG_NET_POCKET=y
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T1_NAPI=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=16
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_SGI_IOC4=m
CONFIG_SERIAL_SGI_IOC3=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS_CS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_MMTIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
CONFIG_I2C_VOODOO3=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_CORE=m
# CONFIG_WATCHDOG_DEBUG_CORE is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ITCO_WDT is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
# CONFIG_MSPEC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Layered filesystems
#
# CONFIG_ECRYPT_FS is not set
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 8:41 ` Kamalesh Babulal
@ 2007-11-21 8:44 ` Avi Kivity
2007-11-21 8:52 ` Robert P. J. Day
2007-11-21 9:58 ` Sam Ravnborg
0 siblings, 2 replies; 128+ messages in thread
From: Avi Kivity @ 2007-11-21 8:44 UTC (permalink / raw)
To: Kamalesh Babulal; +Cc: Andrew Morton, linux-kernel, Andy Whitcroft
Kamalesh Babulal wrote:
> Andrew Morton wrote:
>
>> On Wed, 21 Nov 2007 13:54:50 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>>
>>
>>> The make headers_check fails,
>>>
>>> CHECK include/linux/usb/gadgetfs.h
>>> CHECK include/linux/usb/ch9.h
>>> CHECK include/linux/usb/cdc.h
>>> CHECK include/linux/usb/audio.h
>>> CHECK include/linux/kvm.h
>>> /root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires asm/kvm.h, which does not exist in exported headers
>>>
>> hm, works for me, on i386 and x86_64. What's different over there?
>>
> Hi Andrew,
>
> It fails on the powerpc box, with allyesconfig option.
>
>
How do we fix this? Export linux/kvm.h only on x86? Seems ugly.
--
Any sufficiently difficult bug is indistinguishable from a feature.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 (sync is slow ?)
2007-11-21 8:42 ` 2.6.24-rc3-mm1 (sync is slow ?) KAMEZAWA Hiroyuki
@ 2007-11-21 8:49 ` Andrew Morton
2007-11-22 3:06 ` KAMEZAWA Hiroyuki
2007-11-24 12:04 ` kosaki
2007-11-21 8:49 ` KAMEZAWA Hiroyuki
1 sibling, 2 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 8:49 UTC (permalink / raw)
To: KAMEZAWA Hiroyuki; +Cc: linux-kernel
On Wed, 21 Nov 2007 17:42:15 +0900 KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> Hi, Andrew
>
> I got following result in 'sync' command.
> It was too slow. (memory controller config is off ;)
> I attaches my .config.
> ==
> [2.6.24-rc3-mm1]
> [kamezawa@dr-test2 ~]$ dd if=/dev/zero of=./tmpfile bs=4096 count=100000
> 100000+0 records in
> 100000+0 records out
> 409600000 bytes (410 MB) copied, 1.46706 seconds, 279 MB/s
> [kamezawa@dr-test2 ~]$ time sync
>
> real 3m6.440s
> user 0m0.000s
> sys 0m0.133s
>
>
> on, 2.6.23-rc2-mm1, 2.6.23-rc3 there was no problem.
> ==
> [2.6.24-rc3]
> [kamezawa@dr-test2 ~]$ dd if=/dev/zero of=tmpfile bs=4096 count=100000
> 100000+0 records in
> 100000+0 records out
> 409600000 bytes (410 MB) copied, 2.07717 seconds, 197 MB/s
> [kamezawa@dr-test2 ~]$ time sync
>
> real 0m9.935s
> user 0m0.001s
> sys 0m0.113s
>
> [2.6.24-rc3]
> [kamezawa@dr-test2 ~]$ dd if=/dev/zero of=./tmpfile bs=4096 count=100000
> 100000+0 records in
> 100000+0 records out
> 409600000 bytes (410 MB) copied, 1.37147 seconds, 299 MB/s
> [kamezawa@dr-test2 ~]$ time sync[2.6.24-rc2-mm1]
>
>
> real 0m11.718s
> user 0m0.000s
> sys 0m0.138s
Well I wonder how we did that.
It seems OK here from a quick test (i386, ext3-on-IDE).
Maybe device driver/block breakage?
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 (sync is slow ?)
2007-11-21 8:42 ` 2.6.24-rc3-mm1 (sync is slow ?) KAMEZAWA Hiroyuki
2007-11-21 8:49 ` Andrew Morton
@ 2007-11-21 8:49 ` KAMEZAWA Hiroyuki
1 sibling, 0 replies; 128+ messages in thread
From: KAMEZAWA Hiroyuki @ 2007-11-21 8:49 UTC (permalink / raw)
To: KAMEZAWA Hiroyuki; +Cc: Andrew Morton, linux-kernel
On Wed, 21 Nov 2007 17:42:15 +0900
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> Hi, Andrew
>
> I got following result in 'sync' command.
> It was too slow. (memory controller config is off ;)
> I attaches my .config.
> ==
> [2.6.24-rc3-mm1]
> [kamezawa@dr-test2 ~]$ dd if=/dev/zero of=./tmpfile bs=4096 count=100000
> 100000+0 records in
> 100000+0 records out
> 409600000 bytes (410 MB) copied, 1.46706 seconds, 279 MB/s
> [kamezawa@dr-test2 ~]$ time sync
>
> real 3m6.440s
> user 0m0.000s
> sys 0m0.133s
>
Ah, one of cpu shows 100% iowait in 'top' command while this.
-Kame
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 8:44 ` Avi Kivity
@ 2007-11-21 8:52 ` Robert P. J. Day
2007-11-21 9:04 ` Andrew Morton
2007-11-21 9:58 ` Sam Ravnborg
1 sibling, 1 reply; 128+ messages in thread
From: Robert P. J. Day @ 2007-11-21 8:52 UTC (permalink / raw)
To: Avi Kivity; +Cc: Kamalesh Babulal, Andrew Morton, linux-kernel, Andy Whitcroft
On Wed, 21 Nov 2007, Avi Kivity wrote:
> Kamalesh Babulal wrote:
> > Andrew Morton wrote:
> >
> > > On Wed, 21 Nov 2007 13:54:50 +0530 Kamalesh Babulal
> > > <kamalesh@linux.vnet.ibm.com> wrote:
> > >
> > >
> > > > The make headers_check fails,
> > > >
> > > > CHECK include/linux/usb/gadgetfs.h
> > > > CHECK include/linux/usb/ch9.h
> > > > CHECK include/linux/usb/cdc.h
> > > > CHECK include/linux/usb/audio.h
> > > > CHECK include/linux/kvm.h
> > > > /root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires
> > > > asm/kvm.h, which does not exist in exported headers
> > > >
> > > hm, works for me, on i386 and x86_64. What's different over there?
> > >
> > Hi Andrew,
> >
> > It fails on the powerpc box, with allyesconfig option.
>
> How do we fix this? Export linux/kvm.h only on x86? Seems ugly.
i'm sure i'm going to humiliate myself for asking this, but shouldn't
i be able to reproduce the above by just running:
$ make ARCH=powerpc headers_install/headers_check
we've sort of had this discussion before where, IIRC, you should be
able to generate the appropriate arch-specific headers without having
the corresponding toolchain, no? so why can't i reproduce that error
on my x86 box?
rday
--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA
http://crashcourse.ca
========================================================================
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 8:52 ` Robert P. J. Day
@ 2007-11-21 9:04 ` Andrew Morton
2007-11-21 9:06 ` Robert P. J. Day
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 9:04 UTC (permalink / raw)
To: Robert P. J. Day
Cc: Avi Kivity, Kamalesh Babulal, linux-kernel, Andy Whitcroft
On Wed, 21 Nov 2007 03:52:08 -0500 (EST) "Robert P. J. Day" <rpjday@crashcourse.ca> wrote:
> On Wed, 21 Nov 2007, Avi Kivity wrote:
>
> > Kamalesh Babulal wrote:
> > > Andrew Morton wrote:
> > >
> > > > On Wed, 21 Nov 2007 13:54:50 +0530 Kamalesh Babulal
> > > > <kamalesh@linux.vnet.ibm.com> wrote:
> > > >
> > > >
> > > > > The make headers_check fails,
> > > > >
> > > > > CHECK include/linux/usb/gadgetfs.h
> > > > > CHECK include/linux/usb/ch9.h
> > > > > CHECK include/linux/usb/cdc.h
> > > > > CHECK include/linux/usb/audio.h
> > > > > CHECK include/linux/kvm.h
> > > > > /root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires
> > > > > asm/kvm.h, which does not exist in exported headers
> > > > >
> > > > hm, works for me, on i386 and x86_64. What's different over there?
> > > >
> > > Hi Andrew,
> > >
> > > It fails on the powerpc box, with allyesconfig option.
> >
> > How do we fix this? Export linux/kvm.h only on x86? Seems ugly.
>
> i'm sure i'm going to humiliate myself for asking this, but shouldn't
> i be able to reproduce the above by just running:
>
> $ make ARCH=powerpc headers_install/headers_check
>
> we've sort of had this discussion before where, IIRC, you should be
> able to generate the appropriate arch-specific headers without having
> the corresponding toolchain, no? so why can't i reproduce that error
> on my x86 box?
>
I can.
setenv ARCH powerpc
make mrproper
make allmodconfig
make headers_check
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 9:04 ` Andrew Morton
@ 2007-11-21 9:06 ` Robert P. J. Day
0 siblings, 0 replies; 128+ messages in thread
From: Robert P. J. Day @ 2007-11-21 9:06 UTC (permalink / raw)
To: Andrew Morton; +Cc: Avi Kivity, Kamalesh Babulal, linux-kernel, Andy Whitcroft
On Wed, 21 Nov 2007, Andrew Morton wrote:
> On Wed, 21 Nov 2007 03:52:08 -0500 (EST) "Robert P. J. Day" <rpjday@crashcourse.ca> wrote:
... snip ...
> > i'm sure i'm going to humiliate myself for asking this, but shouldn't
> > i be able to reproduce the above by just running:
> >
> > $ make ARCH=powerpc headers_install/headers_check
> >
> > we've sort of had this discussion before where, IIRC, you should be
> > able to generate the appropriate arch-specific headers without having
> > the corresponding toolchain, no? so why can't i reproduce that error
> > on my x86 box?
> >
>
> I can.
>
> setenv ARCH powerpc
> make mrproper
> make allmodconfig
> make headers_check
ack. never mind, i just noticed that this is with the rc3-mm1 tree.
i was confused since, in the latest git tree, there is absolutely *no*
inclusion of <asm/kvm.h> anywhere in the tree, so clearly something
like that has been added in the mm tree.
sorry for the noise.
rday
--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA
http://crashcourse.ca
========================================================================
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 6:18 ` Andrew Morton
@ 2007-11-21 9:22 ` Kamalesh Babulal
2007-11-21 9:29 ` Andrew Morton
2007-11-21 19:22 ` Len Brown
` (2 subsequent siblings)
3 siblings, 1 reply; 128+ messages in thread
From: Kamalesh Babulal @ 2007-11-21 9:22 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, Andy Whitcroft, Balbir Singh, linux-acpi,
Thomas Gleixner, Ingo Molnar
Andrew Morton wrote:
> On Wed, 21 Nov 2007 11:41:23 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>
>> Hi Andrew,
>>
>> Kernel panic's across different architectures like powerpc, x86_64,
>
> powerpc complains about IO-APICs??
>
>> Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
>> Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
>> Mount-cache hash table entries: 256
>> SMP alternatives: switching to UP code
>> ACPI: Core revision 20070126
>> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>> Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
>
> ACPI or x86 breakage, I guess.
>
> Did 'noapic' work?
Hi Andrew,
Passing noapic works, but the kernel oops's
[ 97.161103] Unable to handle kernel NULL pointer dereference at 0000000000000009 RIP:
[ 97.193973] [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
[ 97.245359] PGD 0
[ 97.257611] Oops: 0000 [1] SMP
[ 97.276638] last sysfs file:
[ 97.294417] CPU 0
[ 97.306620] Modules linked in:
[ 97.325066] Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #1
[ 97.360514] RIP: 0010:[<ffffffff802341df>] [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
[ 97.413287] RSP: 0000:ffff81012fabb650 EFLAGS: 00010286
[ 97.445363] RAX: ffffffff809bb060 RBX: ffff81012fabb650 RCX: 00000000000000ff
[ 97.488378] RDX: 0000000000000001 RSI: 000000000000013e RDI: 0000000000000100
[ 97.531413] RBP: ffff81012fabb680 R08: ffff81012fa88180 R09: 0000000000000000
[ 97.574428] R10: 0000000000000000 R11: 0000000000000000 R12: ffff810001005f50
[ 97.617394] R13: 0000000000000000 R14: ffff81012fa88180 R15: ffff810001005f40
[ 97.660421] FS: 0000000000000000(0000) GS:ffffffff806c3000(0000) knlGS:0000000000000000
[ 97.709327] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 97.743995] CR2: 0000000000000009 CR3: 0000000000201000 CR4: 00000000000006a0
[ 97.787021] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 97.830053] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 97.873036] Process swapper (pid: 1, threadinfo FFFF81012FABA000, task FFFF81012FAB8040)
[ 97.921993] Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 97.971056] ffff810001005f40 ffff81012fabb700 ffff81012fabbdf0 ffffffff80235487
[ 98.016420] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 98.060324] Call Trace:
[ 98.076657] [<ffffffff80235487>] build_sched_domains+0x1e1/0xc19
[ 98.113383] [<ffffffff8025072a>] __kernel_text_address+0x22/0x30
[ 98.150173] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[ 98.184355] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[ 98.215406] [<ffffffff8025db06>] mark_held_locks+0x4a/0x6a
[ 98.249027] [<ffffffff80284f4a>] get_page_from_freelist+0x42a/0x77d
[ 98.287362] [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
[ 98.323123] [<ffffffff8028527a>] get_page_from_freelist+0x75a/0x77d
[ 98.361429] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[ 98.392427] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[ 98.426621] [<ffffffff8034d01a>] number+0x115/0x21f
[ 98.456594] [<ffffffff8025072a>] __kernel_text_address+0x22/0x30
[ 98.493362] [<ffffffff8020d80c>] dump_trace+0x248/0x25d
[ 98.525493] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[ 98.559678] [<ffffffff8025f03f>] __lock_acquire+0xdee/0xf06
[ 98.593868] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[ 98.628038] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[ 98.662225] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[ 98.696370] [<ffffffff8025f03f>] __lock_acquire+0xdee/0xf06
[ 98.730563] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[ 98.764689] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[ 98.795767] [<ffffffff8025db06>] mark_held_locks+0x4a/0x6a
[ 98.829432] [<ffffffff8034d01a>] number+0x115/0x21f
[ 98.859460] [<ffffffff804ca267>] kprobe_flush_task+0x63/0xa9
[ 98.894166] [<ffffffff8034ddbd>] vsnprintf+0x58f/0x5d5
[ 98.925739] [<ffffffff8034de6b>] sprintf+0x68/0x6a
[ 98.955257] [<ffffffff8025f1c9>] lock_acquire+0x72/0xe0
[ 98.987363] [<ffffffff8025ca45>] lock_acquired+0x57/0x1d4
[ 99.020446] [<ffffffff8025f430>] lock_release+0x67/0x21a
[ 99.053079] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[ 99.087261] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[ 99.118328] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[ 99.149394] [<ffffffff80236330>] arch_init_sched_domains+0x27/0x69
[ 99.187217] [<ffffffff802a5a5f>] dbg_redzone2+0x2a/0x52
[ 99.219320] [<ffffffff802a656b>] cache_alloc_debugcheck_after+0x16e/0x1cb
[ 99.260779] [<ffffffff802a8083>] kmem_cache_alloc+0x15e/0x182
[ 99.295944] [<ffffffff80236365>] arch_init_sched_domains+0x5c/0x69
[ 99.333768] [<ffffffff8098e501>] sched_init_smp+0x27/0x113
[ 99.367400] [<ffffffff8034ff35>] __bitmap_weight+0x78/0x8d
[ 99.401090] [<ffffffff8097e631>] kernel_init+0x12d/0x315
[ 99.433718] [<ffffffff804c6f57>] _spin_unlock_irq+0x2b/0x30
[ 99.467842] [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
[ 99.503534] [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
[ 99.539251] [<ffffffff8020d1b8>] child_rip+0xa/0x12
[ 99.569234] [<ffffffff8020c8cf>] restore_args+0x0/0x30
[ 99.600845] [<ffffffff8097e504>] kernel_init+0x0/0x315
[ 99.632426] [<ffffffff8020d1ae>] child_rip+0x0/0x12
[ 99.662455]
[ 99.671637] INFO: lockdep is turned off.
[ 99.695385]
[ 99.695385] Code: 48 03 42 08 49 89 04 24 48 83 c4 20 89 c8 5b 41 5c c9 c3 55
[ 99.750603] RIP [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
[ 99.789632] RSP <ffff81012fabb650>
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 9:22 ` Kamalesh Babulal
@ 2007-11-21 9:29 ` Andrew Morton
2007-11-21 9:43 ` Kamalesh Babulal
2007-11-21 19:33 ` Torsten Kaiser
0 siblings, 2 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 9:29 UTC (permalink / raw)
To: Kamalesh Babulal
Cc: linux-kernel, Andy Whitcroft, Balbir Singh, linux-acpi,
Thomas Gleixner, Ingo Molnar
On Wed, 21 Nov 2007 14:52:26 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> Andrew Morton wrote:
> > On Wed, 21 Nov 2007 11:41:23 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> >
> >> Hi Andrew,
> >>
> >> Kernel panic's across different architectures like powerpc, x86_64,
> >
> > powerpc complains about IO-APICs??
> >
> >> Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
> >> Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
> >> Mount-cache hash table entries: 256
> >> SMP alternatives: switching to UP code
> >> ACPI: Core revision 20070126
> >> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> >> Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
> >
> > ACPI or x86 breakage, I guess.
> >
> > Did 'noapic' work?
> Hi Andrew,
>
> Passing noapic works,
OK.
> but the kernel oops's
>
> [ 97.161103] Unable to handle kernel NULL pointer dereference at 0000000000000009 RIP:
> [ 97.193973] [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
> [ 97.245359] PGD 0
> [ 97.257611] Oops: 0000 [1] SMP
> [ 97.276638] last sysfs file:
> [ 97.294417] CPU 0
> [ 97.306620] Modules linked in:
> [ 97.325066] Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #1
> [ 97.360514] RIP: 0010:[<ffffffff802341df>] [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
> [ 97.413287] RSP: 0000:ffff81012fabb650 EFLAGS: 00010286
> [ 97.445363] RAX: ffffffff809bb060 RBX: ffff81012fabb650 RCX: 00000000000000ff
> [ 97.488378] RDX: 0000000000000001 RSI: 000000000000013e RDI: 0000000000000100
> [ 97.531413] RBP: ffff81012fabb680 R08: ffff81012fa88180 R09: 0000000000000000
> [ 97.574428] R10: 0000000000000000 R11: 0000000000000000 R12: ffff810001005f50
> [ 97.617394] R13: 0000000000000000 R14: ffff81012fa88180 R15: ffff810001005f40
> [ 97.660421] FS: 0000000000000000(0000) GS:ffffffff806c3000(0000) knlGS:0000000000000000
> [ 97.709327] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> [ 97.743995] CR2: 0000000000000009 CR3: 0000000000201000 CR4: 00000000000006a0
> [ 97.787021] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 97.830053] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [ 97.873036] Process swapper (pid: 1, threadinfo FFFF81012FABA000, task FFFF81012FAB8040)
> [ 97.921993] Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> [ 97.971056] ffff810001005f40 ffff81012fabb700 ffff81012fabbdf0 ffffffff80235487
> [ 98.016420] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> [ 98.060324] Call Trace:
> [ 98.076657] [<ffffffff80235487>] build_sched_domains+0x1e1/0xc19
> [ 98.113383] [<ffffffff8025072a>] __kernel_text_address+0x22/0x30
> [ 98.150173] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
> [ 98.184355] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
> [ 98.215406] [<ffffffff8025db06>] mark_held_locks+0x4a/0x6a
> [ 98.249027] [<ffffffff80284f4a>] get_page_from_freelist+0x42a/0x77d
> [ 98.287362] [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
> [ 98.323123] [<ffffffff8028527a>] get_page_from_freelist+0x75a/0x77d
> [ 98.361429] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
> [ 98.392427] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
> [ 98.426621] [<ffffffff8034d01a>] number+0x115/0x21f
> [ 98.456594] [<ffffffff8025072a>] __kernel_text_address+0x22/0x30
> [ 98.493362] [<ffffffff8020d80c>] dump_trace+0x248/0x25d
> [ 98.525493] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
> [ 98.559678] [<ffffffff8025f03f>] __lock_acquire+0xdee/0xf06
> [ 98.593868] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
> [ 98.628038] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
> [ 98.662225] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
> [ 98.696370] [<ffffffff8025f03f>] __lock_acquire+0xdee/0xf06
> [ 98.730563] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
> [ 98.764689] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
> [ 98.795767] [<ffffffff8025db06>] mark_held_locks+0x4a/0x6a
> [ 98.829432] [<ffffffff8034d01a>] number+0x115/0x21f
> [ 98.859460] [<ffffffff804ca267>] kprobe_flush_task+0x63/0xa9
> [ 98.894166] [<ffffffff8034ddbd>] vsnprintf+0x58f/0x5d5
> [ 98.925739] [<ffffffff8034de6b>] sprintf+0x68/0x6a
> [ 98.955257] [<ffffffff8025f1c9>] lock_acquire+0x72/0xe0
> [ 98.987363] [<ffffffff8025ca45>] lock_acquired+0x57/0x1d4
> [ 99.020446] [<ffffffff8025f430>] lock_release+0x67/0x21a
> [ 99.053079] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
> [ 99.087261] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
> [ 99.118328] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
> [ 99.149394] [<ffffffff80236330>] arch_init_sched_domains+0x27/0x69
> [ 99.187217] [<ffffffff802a5a5f>] dbg_redzone2+0x2a/0x52
> [ 99.219320] [<ffffffff802a656b>] cache_alloc_debugcheck_after+0x16e/0x1cb
> [ 99.260779] [<ffffffff802a8083>] kmem_cache_alloc+0x15e/0x182
> [ 99.295944] [<ffffffff80236365>] arch_init_sched_domains+0x5c/0x69
> [ 99.333768] [<ffffffff8098e501>] sched_init_smp+0x27/0x113
> [ 99.367400] [<ffffffff8034ff35>] __bitmap_weight+0x78/0x8d
> [ 99.401090] [<ffffffff8097e631>] kernel_init+0x12d/0x315
> [ 99.433718] [<ffffffff804c6f57>] _spin_unlock_irq+0x2b/0x30
> [ 99.467842] [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
> [ 99.503534] [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
> [ 99.539251] [<ffffffff8020d1b8>] child_rip+0xa/0x12
> [ 99.569234] [<ffffffff8020c8cf>] restore_args+0x0/0x30
> [ 99.600845] [<ffffffff8097e504>] kernel_init+0x0/0x315
> [ 99.632426] [<ffffffff8020d1ae>] child_rip+0x0/0x12
> [ 99.662455]
> [ 99.671637] INFO: lockdep is turned off.
> [ 99.695385]
> [ 99.695385] Code: 48 03 42 08 49 89 04 24 48 83 c4 20 89 c8 5b 41 5c c9 c3 55
> [ 99.750603] RIP [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
> [ 99.789632] RSP <ffff81012fabb650>
urgh, mess. Enabling frame pointers might help here.
But we're cc'ing the right guy ;)
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 9:29 ` Andrew Morton
@ 2007-11-21 9:43 ` Kamalesh Babulal
2007-11-21 19:33 ` Torsten Kaiser
1 sibling, 0 replies; 128+ messages in thread
From: Kamalesh Babulal @ 2007-11-21 9:43 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, Andy Whitcroft, Balbir Singh, linux-acpi,
Thomas Gleixner, Ingo Molnar
Andrew Morton wrote:
> On Wed, 21 Nov 2007 14:52:26 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>
>> Andrew Morton wrote:
>>> On Wed, 21 Nov 2007 11:41:23 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>>>
>>>> Hi Andrew,
>>>>
>>>> Kernel panic's across different architectures like powerpc, x86_64,
>>> powerpc complains about IO-APICs??
>>>
>>>> Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
>>>> Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
>>>> Mount-cache hash table entries: 256
>>>> SMP alternatives: switching to UP code
>>>> ACPI: Core revision 20070126
>>>> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>>>> Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
>>> ACPI or x86 breakage, I guess.
>>>
>>> Did 'noapic' work?
>> Hi Andrew,
>>
>> Passing noapic works,
>
> OK.
>
>> but the kernel oops's
>>
>> [ 97.161103] Unable to handle kernel NULL pointer dereference at 0000000000000009 RIP:
>> [ 97.193973] [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
>> [ 97.245359] PGD 0
>> [ 97.257611] Oops: 0000 [1] SMP
>> [ 97.276638] last sysfs file:
>> [ 97.294417] CPU 0
>> [ 97.306620] Modules linked in:
>> [ 97.325066] Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #1
>> [ 97.360514] RIP: 0010:[<ffffffff802341df>] [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
>> [ 97.413287] RSP: 0000:ffff81012fabb650 EFLAGS: 00010286
>> [ 97.445363] RAX: ffffffff809bb060 RBX: ffff81012fabb650 RCX: 00000000000000ff
>> [ 97.488378] RDX: 0000000000000001 RSI: 000000000000013e RDI: 0000000000000100
>> [ 97.531413] RBP: ffff81012fabb680 R08: ffff81012fa88180 R09: 0000000000000000
>> [ 97.574428] R10: 0000000000000000 R11: 0000000000000000 R12: ffff810001005f50
>> [ 97.617394] R13: 0000000000000000 R14: ffff81012fa88180 R15: ffff810001005f40
>> [ 97.660421] FS: 0000000000000000(0000) GS:ffffffff806c3000(0000) knlGS:0000000000000000
>> [ 97.709327] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
>> [ 97.743995] CR2: 0000000000000009 CR3: 0000000000201000 CR4: 00000000000006a0
>> [ 97.787021] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [ 97.830053] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>> [ 97.873036] Process swapper (pid: 1, threadinfo FFFF81012FABA000, task FFFF81012FAB8040)
>> [ 97.921993] Stack: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>> [ 97.971056] ffff810001005f40 ffff81012fabb700 ffff81012fabbdf0 ffffffff80235487
>> [ 98.016420] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>> [ 98.060324] Call Trace:
>> [ 98.076657] [<ffffffff80235487>] build_sched_domains+0x1e1/0xc19
>> [ 98.113383] [<ffffffff8025072a>] __kernel_text_address+0x22/0x30
>> [ 98.150173] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
>> [ 98.184355] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
>> [ 98.215406] [<ffffffff8025db06>] mark_held_locks+0x4a/0x6a
>> [ 98.249027] [<ffffffff80284f4a>] get_page_from_freelist+0x42a/0x77d
>> [ 98.287362] [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
>> [ 98.323123] [<ffffffff8028527a>] get_page_from_freelist+0x75a/0x77d
>> [ 98.361429] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
>> [ 98.392427] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
>> [ 98.426621] [<ffffffff8034d01a>] number+0x115/0x21f
>> [ 98.456594] [<ffffffff8025072a>] __kernel_text_address+0x22/0x30
>> [ 98.493362] [<ffffffff8020d80c>] dump_trace+0x248/0x25d
>> [ 98.525493] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
>> [ 98.559678] [<ffffffff8025f03f>] __lock_acquire+0xdee/0xf06
>> [ 98.593868] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
>> [ 98.628038] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
>> [ 98.662225] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
>> [ 98.696370] [<ffffffff8025f03f>] __lock_acquire+0xdee/0xf06
>> [ 98.730563] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
>> [ 98.764689] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
>> [ 98.795767] [<ffffffff8025db06>] mark_held_locks+0x4a/0x6a
>> [ 98.829432] [<ffffffff8034d01a>] number+0x115/0x21f
>> [ 98.859460] [<ffffffff804ca267>] kprobe_flush_task+0x63/0xa9
>> [ 98.894166] [<ffffffff8034ddbd>] vsnprintf+0x58f/0x5d5
>> [ 98.925739] [<ffffffff8034de6b>] sprintf+0x68/0x6a
>> [ 98.955257] [<ffffffff8025f1c9>] lock_acquire+0x72/0xe0
>> [ 98.987363] [<ffffffff8025ca45>] lock_acquired+0x57/0x1d4
>> [ 99.020446] [<ffffffff8025f430>] lock_release+0x67/0x21a
>> [ 99.053079] [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
>> [ 99.087261] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
>> [ 99.118328] [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
>> [ 99.149394] [<ffffffff80236330>] arch_init_sched_domains+0x27/0x69
>> [ 99.187217] [<ffffffff802a5a5f>] dbg_redzone2+0x2a/0x52
>> [ 99.219320] [<ffffffff802a656b>] cache_alloc_debugcheck_after+0x16e/0x1cb
>> [ 99.260779] [<ffffffff802a8083>] kmem_cache_alloc+0x15e/0x182
>> [ 99.295944] [<ffffffff80236365>] arch_init_sched_domains+0x5c/0x69
>> [ 99.333768] [<ffffffff8098e501>] sched_init_smp+0x27/0x113
>> [ 99.367400] [<ffffffff8034ff35>] __bitmap_weight+0x78/0x8d
>> [ 99.401090] [<ffffffff8097e631>] kernel_init+0x12d/0x315
>> [ 99.433718] [<ffffffff804c6f57>] _spin_unlock_irq+0x2b/0x30
>> [ 99.467842] [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
>> [ 99.503534] [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
>> [ 99.539251] [<ffffffff8020d1b8>] child_rip+0xa/0x12
>> [ 99.569234] [<ffffffff8020c8cf>] restore_args+0x0/0x30
>> [ 99.600845] [<ffffffff8097e504>] kernel_init+0x0/0x315
>> [ 99.632426] [<ffffffff8020d1ae>] child_rip+0x0/0x12
>> [ 99.662455]
>> [ 99.671637] INFO: lockdep is turned off.
>> [ 99.695385]
>> [ 99.695385] Code: 48 03 42 08 49 89 04 24 48 83 c4 20 89 c8 5b 41 5c c9 c3 55
>> [ 99.750603] RIP [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
>> [ 99.789632] RSP <ffff81012fabb650>
>
> urgh, mess. Enabling frame pointers might help here.
>
> But we're cc'ing the right guy ;)
>
The kernel was compiled with frame pointers enabled.
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 8:44 ` Avi Kivity
2007-11-21 8:52 ` Robert P. J. Day
@ 2007-11-21 9:58 ` Sam Ravnborg
2007-11-21 10:00 ` Avi Kivity
2007-11-24 14:34 ` Adrian Bunk
1 sibling, 2 replies; 128+ messages in thread
From: Sam Ravnborg @ 2007-11-21 9:58 UTC (permalink / raw)
To: Avi Kivity; +Cc: Kamalesh Babulal, Andrew Morton, linux-kernel, Andy Whitcroft
On Wed, Nov 21, 2007 at 10:44:40AM +0200, Avi Kivity wrote:
> Kamalesh Babulal wrote:
> >Andrew Morton wrote:
> >
> >>On Wed, 21 Nov 2007 13:54:50 +0530 Kamalesh Babulal
> >><kamalesh@linux.vnet.ibm.com> wrote:
> >>
> >>
> >>>The make headers_check fails,
> >>>
> >>> CHECK include/linux/usb/gadgetfs.h
> >>> CHECK include/linux/usb/ch9.h
> >>> CHECK include/linux/usb/cdc.h
> >>> CHECK include/linux/usb/audio.h
> >>> CHECK include/linux/kvm.h
> >>>/root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires
> >>>asm/kvm.h, which does not exist in exported headers
> >>>
> >>hm, works for me, on i386 and x86_64. What's different over there?
> >>
> >Hi Andrew,
> >
> >It fails on the powerpc box, with allyesconfig option.
> >
> >
>
> How do we fix this? Export linux/kvm.h only on x86? Seems ugly.
Is kvm x86 specific? Then move the .h file to asm-x86.
Otherwise no good idea...
Sam
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 9:58 ` Sam Ravnborg
@ 2007-11-21 10:00 ` Avi Kivity
2007-11-21 10:17 ` Avi Kivity
2007-11-24 14:34 ` Adrian Bunk
1 sibling, 1 reply; 128+ messages in thread
From: Avi Kivity @ 2007-11-21 10:00 UTC (permalink / raw)
To: Sam Ravnborg
Cc: Kamalesh Babulal, Andrew Morton, linux-kernel, Andy Whitcroft
Sam Ravnborg wrote:
> On Wed, Nov 21, 2007 at 10:44:40AM +0200, Avi Kivity wrote:
>
>> Kamalesh Babulal wrote:
>>
>>> Andrew Morton wrote:
>>>
>>>
>>>> On Wed, 21 Nov 2007 13:54:50 +0530 Kamalesh Babulal
>>>> <kamalesh@linux.vnet.ibm.com> wrote:
>>>>
>>>>
>>>>
>>>>> The make headers_check fails,
>>>>>
>>>>> CHECK include/linux/usb/gadgetfs.h
>>>>> CHECK include/linux/usb/ch9.h
>>>>> CHECK include/linux/usb/cdc.h
>>>>> CHECK include/linux/usb/audio.h
>>>>> CHECK include/linux/kvm.h
>>>>> /root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires
>>>>> asm/kvm.h, which does not exist in exported headers
>>>>>
>>>>>
>>>> hm, works for me, on i386 and x86_64. What's different over there?
>>>>
>>>>
>>> Hi Andrew,
>>>
>>> It fails on the powerpc box, with allyesconfig option.
>>>
>>>
>>>
>> How do we fix this? Export linux/kvm.h only on x86? Seems ugly.
>>
>
> Is kvm x86 specific? Then move the .h file to asm-x86.
> Otherwise no good idea...
>
>
kvm.h is x86 specific today, but will be s390, ppc, ia64, and x86
specific tomorrow.
What about having a asm-generic/kvm.h with a nice #error? would that
suit?
--
error compiling committee.c: too many arguments to function
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 10:00 ` Avi Kivity
@ 2007-11-21 10:17 ` Avi Kivity
2007-11-21 10:31 ` Robert P. J. Day
2007-11-28 5:02 ` Andrew Morton
0 siblings, 2 replies; 128+ messages in thread
From: Avi Kivity @ 2007-11-21 10:17 UTC (permalink / raw)
To: Sam Ravnborg
Cc: Kamalesh Babulal, Andrew Morton, linux-kernel, Andy Whitcroft
Avi Kivity wrote:
>>>>>
>>>>>> The make headers_check fails,
>>>>>>
>>>>>> CHECK include/linux/usb/gadgetfs.h
>>>>>> CHECK include/linux/usb/ch9.h
>>>>>> CHECK include/linux/usb/cdc.h
>>>>>> CHECK include/linux/usb/audio.h
>>>>>> CHECK include/linux/kvm.h
>>>>>> /root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires
>>>>>> asm/kvm.h, which does not exist in exported headers
>>>>>>
>>>>> hm, works for me, on i386 and x86_64. What's different over there?
>>>>>
>>>> Hi Andrew,
>>>>
>>>> It fails on the powerpc box, with allyesconfig option.
>>>>
>>>>
>>>>
>>> How do we fix this? Export linux/kvm.h only on x86? Seems ugly.
>>>
>>
>> Is kvm x86 specific? Then move the .h file to asm-x86.
>> Otherwise no good idea...
>>
>>
>
> kvm.h is x86 specific today, but will be s390, ppc, ia64, and x86
> specific tomorrow.
>
> What about having a asm-generic/kvm.h with a nice #error? would
> that suit?
>
headers_check continues to complain. Is the only recourse to add
asm/kvm.h for all archs?
--
error compiling committee.c: too many arguments to function
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 10:17 ` Avi Kivity
@ 2007-11-21 10:31 ` Robert P. J. Day
2007-11-28 5:02 ` Andrew Morton
1 sibling, 0 replies; 128+ messages in thread
From: Robert P. J. Day @ 2007-11-21 10:31 UTC (permalink / raw)
To: Avi Kivity
Cc: Sam Ravnborg, Kamalesh Babulal, Andrew Morton, linux-kernel,
Andy Whitcroft
On Wed, 21 Nov 2007, Avi Kivity wrote:
> headers_check continues to complain. Is the only recourse to add
> asm/kvm.h for all archs?
that's what's happened with other header files. see asm-*/auxvec.h,
for example.
rday
--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA
http://crashcourse.ca
========================================================================
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 6:08 ` 2.6.24-rc3-mm1 Andrew Morton
@ 2007-11-21 12:49 ` Rene Herman
0 siblings, 0 replies; 128+ messages in thread
From: Rene Herman @ 2007-11-21 12:49 UTC (permalink / raw)
To: Andrew Morton; +Cc: KAMEZAWA Hiroyuki, linux-kernel
On 21-11-07 07:08, Andrew Morton wrote:
>> fix (for my config ?) is attached.
>>
>> =
>> This was necessary to build.
>>
>> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
>>
>> arch/ia64/lib/Makefile | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> Index: linux-2.6.24-rc3-mm1/arch/ia64/lib/Makefile
>> ===================================================================
>> --- linux-2.6.24-rc3-mm1.orig/arch/ia64/lib/Makefile
>> +++ linux-2.6.24-rc3-mm1/arch/ia64/lib/Makefile
>> @@ -2,7 +2,7 @@
>> # Makefile for ia64-specific library routines..
>> #
>>
>> -obj-y := io.o copy_page-export.o
>> +obj-y := io.o
>>
>> lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \
>> __divdi3.o __udivdi3.o __moddi3.o __umoddi3.o \
>
> erp. Actually, it should be this:
>
> --- a/arch/ia64/lib/Makefile~ia64-export-copy_page-to-modules-fix-fix
> +++ a/arch/ia64/lib/Makefile
> @@ -2,7 +2,7 @@
> # Makefile for ia64-specific library routines..
> #
>
> -obj-y := io.o copy_page-export.o
> +obj-y := io.o
>
> lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \
> __divdi3.o __udivdi3.o __moddi3.o __umoddi3.o \
Devil's in the invisible details? :-?
Rene.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: usb mouse doesn't work
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (6 preceding siblings ...)
2007-11-21 8:42 ` 2.6.24-rc3-mm1 (sync is slow ?) KAMEZAWA Hiroyuki
@ 2007-11-21 18:23 ` Kirill A. Shutemov
2007-11-21 22:22 ` Andrew Morton
2007-11-21 21:45 ` 2.6.24-rc3-mm1: I/O error, system hangs Laurent Riffard
` (4 subsequent siblings)
12 siblings, 1 reply; 128+ messages in thread
From: Kirill A. Shutemov @ 2007-11-21 18:23 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 3180 bytes --]
USB mouse(Logitech M-BT58) doesn't work. TouchPad works.
dmesg after rmmod usbcore && modprobe uhci_hcd:
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKE] -> GSI 10 (level, low)
-> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000bf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKF] -> GSI 11 (level, low)
-> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKG] -> GSI 9 (level, low)
-> IRQ 9
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKH] -> GSI 7 (level, low)
-> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
uhci_hcd 0000:00:1d.3: FGR not stopped yet!
--
Regards, Kirill A. Shutemov
+ Belarus, Minsk
+ Velesys LLC, http://www.velesys.com/
+ ALT Linux Team, http://www.altlinux.com/
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 6:15 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-21 6:22 ` 2.6.24-rc3-mm1 Dave Young
@ 2007-11-21 18:35 ` Kirill A. Shutemov
2007-11-21 22:25 ` 2.6.24-rc3-mm1 Andrew Morton
1 sibling, 1 reply; 128+ messages in thread
From: Kirill A. Shutemov @ 2007-11-21 18:35 UTC (permalink / raw)
To: Andrew Morton
Cc: Dave Young, linux-kernel, Avi Kivity, Thomas Gleixner, Ingo Molnar
[-- Attachment #1: Type: text/plain, Size: 1479 bytes --]
On [Tue, 20.11.2007 22:15], Andrew Morton wrote:
> On Wed, 21 Nov 2007 14:03:34 +0800 "Dave Young" <hidave.darkstar@gmail.com> wrote:
>
> > On Nov 21, 2007 2:00 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
> > >
> > > On Wed, 21 Nov 2007 13:51:47 +0800 "Dave Young" <hidave.darkstar@gmail.com> wrote:
> > >
> > > > Hi, andrew
> > > >
> > > > modpost failed for me:
> > > > MODPOST 360 modules
> > > > ERROR: "empty_zero_page" [drivers/kvm/kvm.ko] undefined!
> > > > make[1]: *** [__modpost] Error 1
> > > > make: *** [modules] Error 2
> > > >
> > >
> > > You're a victim of the hasty unexporting fad. Which architecture?
> > > x86_64 I guess?
> > >
> > Hi,
> > ia32 instead.
> >
>
> oic. Like this, I guess.
>
> --- a/arch/x86/kernel/i386_ksyms_32.c~git-x86-i386-export-empty_zero_page
> +++ a/arch/x86/kernel/i386_ksyms_32.c
> @@ -2,6 +2,7 @@
> #include <asm/semaphore.h>
> #include <asm/checksum.h>
> #include <asm/desc.h>
> +#include <asm/pgtable.h>
>
> EXPORT_SYMBOL(__down_failed);
> EXPORT_SYMBOL(__down_failed_interruptible);
> @@ -22,3 +23,4 @@ EXPORT_SYMBOL(__put_user_8);
> EXPORT_SYMBOL(strstr);
>
> EXPORT_SYMBOL(csum_partial);
> +EXPORT_SYMBOL(empty_zero_page);
> _
Symbol init_level4_pgt is needed by nvidia module. Is it really need to
unexport it?
--
Regards, Kirill A. Shutemov
+ Belarus, Minsk
+ Velesys LLC, http://www.velesys.com/
+ ALT Linux Team, http://www.altlinux.com/
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 6:18 ` Andrew Morton
2007-11-21 9:22 ` Kamalesh Babulal
@ 2007-11-21 19:22 ` Len Brown
2007-11-21 19:48 ` Torsten Kaiser
2007-11-24 0:49 ` Alexey Dobriyan
2007-11-26 19:39 ` Rik van Riel
3 siblings, 1 reply; 128+ messages in thread
From: Len Brown @ 2007-11-21 19:22 UTC (permalink / raw)
To: Andrew Morton
Cc: Kamalesh Babulal, linux-kernel, Andy Whitcroft, Balbir Singh,
linux-acpi, Thomas Gleixner, Ingo Molnar
On Wednesday 21 November 2007 01:18, Andrew Morton wrote:
> On Wed, 21 Nov 2007 11:41:23 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> > SMP alternatives: switching to UP code
> > ACPI: Core revision 20070126
> > ..MP-BIOS bug: 8254 timer not connected to IO-APIC
did previous kernels print this too?
> > Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
>
> ACPI or x86 breakage, I guess.
If you suspect ACPI breakage, then try "acpi=off" or "acpi=noirq".
thanks,
-Len
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 9:29 ` Andrew Morton
2007-11-21 9:43 ` Kamalesh Babulal
@ 2007-11-21 19:33 ` Torsten Kaiser
2007-11-22 10:04 ` Kirill A. Shutemov
1 sibling, 1 reply; 128+ messages in thread
From: Torsten Kaiser @ 2007-11-21 19:33 UTC (permalink / raw)
To: Andrew Morton
Cc: Kamalesh Babulal, linux-kernel, Andy Whitcroft, Balbir Singh,
linux-acpi, Thomas Gleixner, Ingo Molnar
On Nov 21, 2007 10:29 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> On Wed, 21 Nov 2007 14:52:26 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>
> > Andrew Morton wrote:
> > > On Wed, 21 Nov 2007 11:41:23 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> > >> ACPI: Core revision 20070126
> > >> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> > >> Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
I seen an identical error.
> > > ACPI or x86 breakage, I guess.
> > >
> > > Did 'noapic' work?
> >
> > Passing noapic works,
>
> OK.
Not for me. I get a similar oops, but then the kernel panics
> > but the kernel oops's
> >
> > [ 97.161103] Unable to handle kernel NULL pointer dereference at 0000000000000009 RIP:
> > [ 97.193973] [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
[snip]
> urgh, mess. Enabling frame pointers might help here.
CONFIG_FRAME_POINTER=y
The oops/panic that happens with noapic:
[ 35.866758] Initializing CPU#3
[ 35.868769] Stuck ??
[ 35.874043] Inquiring remote APIC #3...
[ 35.877896] ... APIC #3 ID: 03000000
[ 35.881523] ... APIC #3 VERSION: 80050010
[ 35.885587] ... APIC #3 SPIV: 000001ff
[ 35.889390] Brought up 1 CPUs
[ 35.892375] Unable to handle kernel NULL pointer dereference at
0000000000000009 RIP:
[ 35.897868] [<ffffffff8022fc5b>] cpu_to_allnodes_group+0x4b/0x60
[ 35.906464] PGD 0
[ 35.908523] Oops: 0000 [1] SMP
[ 35.911757] last sysfs file:
[ 35.914740] CPU 0
[ 35.916798] Modules linked in:
[ 35.919990] Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #2
[ 35.925914] RIP: 0010:[<ffffffff8022fc5b>] [<ffffffff8022fc5b>]
cpu_to_allnodes_group+0x4b/0x60
[ 35.934734] RSP: 0000:ffff81011ff2bdb0 EFLAGS: 00010282
[ 35.940053] RAX: ffffffff8084d870 RBX: ffff810001005810 RCX: 0000000000000004
[ 35.947188] RDX: 0000000000000001 RSI: ffff81011ff26f68 RDI: ffff81011ff2bdb0
[ 35.954323] RBP: ffff81011ff2bdd0 R08: 2222222222222222 R09: 0000000000000000
[ 35.961457] R10: ffff81007ff1c200 R11: 0000000000000200 R12: ffff810001005800
[ 35.968592] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 35.975727] FS: 0000000000000000(0000) GS:ffffffff807d4000(0000)
knlGS:0000000000000000
[ 35.983951] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 35.989701] CR2: 0000000000000009 CR3: 0000000000201000 CR4: 00000000000006a0
[ 35.996836] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 36.003971] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 36.011105] Process swapper (pid: 1, threadinfo FFFF81011FF2A000,
task FFFF81007FF2A000)
[ 36.019191] Stack: 0000000000000000 ffffffff807e8f98
0000000000000000 ffff810001005800
[ 36.027373] ffff81011ff2be80 ffffffff80230580 ffffffff8084d640
ffffffff8084d6e0
[ 36.034922] ffffffff8084d780 ffffffff8084d800 ffffffffffffffff
ffff81011ff26f68
[ 36.042247] Call Trace:
[ 36.044929] [<ffffffff80230580>] build_sched_domains+0x460/0x820
[ 36.051701] [<ffffffff805cf489>] mutex_lock_nested+0x199/0x2e0
[ 36.057624] [<ffffffff80230991>] arch_init_sched_domains+0x51/0x60
[ 36.063895] [<ffffffff8080e422>] sched_init_smp+0x22/0xe0
[ 36.069385] [<ffffffff80806825>] smp_cpus_done+0x25/0x30
[ 36.074791] [<ffffffff807fb739>] kernel_init+0x109/0x350
[ 36.080196] [<ffffffff8025a34f>] trace_hardirqs_on+0xbf/0x160
[ 36.086032] [<ffffffff805d03d2>] trace_hardirqs_on_thunk+0x35/0x3a
[ 36.092303] [<ffffffff8025a34f>] trace_hardirqs_on+0xbf/0x160
[ 36.098141] [<ffffffff8020cbc8>] child_rip+0xa/0x12
[ 36.103113] [<ffffffff8020c2df>] restore_args+0x0/0x30
[ 36.108345] [<ffffffff807fb630>] kernel_init+0x0/0x350
[ 36.113750] [<ffffffff8020cbbe>] child_rip+0x0/0x12
[ 36.118722]
[ 36.120236] INFO: lockdep is turned off.
[ 36.124170]
[ 36.124170] Code: 48 03 42 08 48 89 03 48 83 c4 18 89 c8 5b c9 c3
0f 1f 44 00
[ 36.133640] RIP [<ffffffff8022fc5b>] cpu_to_allnodes_group+0x4b/0x60
[ 36.140116] RSP <ffff81011ff2bdb0>
[ 36.143619] CR2: 0000000000000009
[ 36.146952] Kernel panic - not syncing: Attempted to kill init!
(gdb) list *0xffffffff8022fc5b
0xffffffff8022fc5b is in cpu_to_allnodes_group (kernel/sched.c:6073).
6068
6069 cpus_and(nodemask, nodemask, *cpu_map);
6070 group = first_cpu(nodemask);
6071
6072 if (sg)
6073 *sg = &per_cpu(sched_group_allnodes, group);
6074 return group;
6075 }
6076
6077 static void init_numa_sched_groups_power(struct sched_group *group_head)
Hope this stack trace is better.
Torsten
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 19:22 ` Len Brown
@ 2007-11-21 19:48 ` Torsten Kaiser
0 siblings, 0 replies; 128+ messages in thread
From: Torsten Kaiser @ 2007-11-21 19:48 UTC (permalink / raw)
To: Len Brown
Cc: Andrew Morton, Kamalesh Babulal, linux-kernel, Andy Whitcroft,
Balbir Singh, linux-acpi, Thomas Gleixner, Ingo Molnar
On Nov 21, 2007 8:22 PM, Len Brown <lenb@kernel.org> wrote:
> On Wednesday 21 November 2007 01:18, Andrew Morton wrote:
> > On Wed, 21 Nov 2007 11:41:23 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>
> > > SMP alternatives: switching to UP code
> > > ACPI: Core revision 20070126
> > > ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>
> did previous kernels print this too?
Not since my last BIOS upgrade.
This is from what dmesg's I still had laying around:
2.6.22-rc6-mm1: No
2.6.23-rc1-mm1, 2.6.23-rc2-mm1, 2.6.23-rc3-mm1: Yes
2.6.23-rc3-mm1 after BIOS upgrade: No
2.6.23-rc4-mm1...2.6.24-rc2-mm1: No
> > > Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
> >
> > ACPI or x86 breakage, I guess.
>
> If you suspect ACPI breakage, then try "acpi=off" or "acpi=noirq".
ACPI doesn't look guilty.
acpi=noirq:
[ 39.905884] Freeing SMP alternatives: 28k freed
[ 39.910674] ACPI: Core revision 20070126
[ 39.916542] ACPI: setting ELCR to 0e20 (from 0c20)
[ 39.921855] ExtINT not setup in hardware but reported by MP table
[ 39.928244] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 39.934586] Kernel panic - not syncing: IO-APIC + timer doesn't
work! Try using the 'noapic' kernel parameter
[ 39.934587]
acpi=off:
[ 0.000000] Freeing SMP alternatives: 28k freed
[ 0.000000] ExtINT not setup in hardware but reported by MP table
[ 0.000000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.000000] Kernel panic - not syncing: IO-APIC + timer doesn't
work! Try using the 'noapic' kernel parameter
[ 0.000000]
Torsten
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (7 preceding siblings ...)
2007-11-21 18:23 ` 2.6.24-rc3-mm1: usb mouse doesn't work Kirill A. Shutemov
@ 2007-11-21 21:45 ` Laurent Riffard
2007-11-21 22:41 ` Andrew Morton
2007-11-22 10:22 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
` (3 subsequent siblings)
12 siblings, 1 reply; 128+ messages in thread
From: Laurent Riffard @ 2007-11-21 21:45 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1389 bytes --]
Le 21.11.2007 05:45, Andrew Morton a écrit :
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
Hello,
My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
that a bunch of task are blocked in "D" state, they seem to wait for
some I/O completion. I can try to hand-copy some data if requested.
I found these messages in dmesg:
~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 16460
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
--
ReiserFS: sda7: Using r5 hash to sort names
sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdb, sector 19632
sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdb, sector 40037363
Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
lp0: using parport0 (interrupt-driven).
These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
Maybe something is broken in pata_via driver ?
~~
laurent
(.config and dmesg before system hang are attached)
[-- Attachment #2: dmesg-2.6.24-rc3-mm1 --]
[-- Type: text/plain, Size: 23808 bytes --]
Linux version 2.6.24-rc3-mm1 (laurent@calimero) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #108 PREEMPT Wed Nov 21 18:30:32 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Entering add_active_range(0, 0, 131052) 0 entries of 256 used
sizeof(struct page) = 32
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131052
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131052
On node 0 totalpages: 131052
Node 0 memmap at 0xC1000000 size 4194304 first pfn 0xC1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125965 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6A80, 0014 (r0 ASUS )
ACPI: RSDT 1FFEC000, 002C (r1 ASUS A7V133-C 30303031 MSFT 31313031)
ACPI: FACP 1FFEC080, 0074 (r1 ASUS A7V133-C 30303031 MSFT 31313031)
ACPI: DSDT 1FFEC100, 2CE1 (r1 ASUS A7V133-C 1000 MSFT 100000B)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFEC040, 0028 (r1 ASUS A7V133-C 30303031 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130029
Kernel command line: root=/dev/mapper/vglinux1-lv_ubuntu2 ro locale=fr_FR video=radeonfb:1280x1024@60 resume=/dev/mapper/vglinux1-lvswap
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01406000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=C03C2000 soft=C03C1000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1410.215 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 30
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 992 kB
per task-struct memory footprint: 1200 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | | ok |
recursive read-lock #2: | ok | | ok |
mixed read-write-lock: | ok | | ok |
mixed write-read-lock: | ok | | ok |
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: ok | ok | ok |
soft-irqs-on + irq-safe-A/12: ok | ok | ok |
hard-irqs-on + irq-safe-A/21: ok | ok | ok |
soft-irqs-on + irq-safe-A/21: ok | ok | ok |
sirq-safe-A => hirqs-on/12: ok | ok | ok |
sirq-safe-A => hirqs-on/21: ok | ok | ok |
hard-safe-A + irqs-on/12: ok | ok | ok |
soft-safe-A + irqs-on/12: ok | ok | ok |
hard-safe-A + irqs-on/21: ok | ok | ok |
soft-safe-A + irqs-on/21: ok | ok | ok |
hard-safe-A + unsafe-B #1/123: ok | ok | ok |
soft-safe-A + unsafe-B #1/123: ok | ok | ok |
hard-safe-A + unsafe-B #1/132: ok | ok | ok |
soft-safe-A + unsafe-B #1/132: ok | ok | ok |
hard-safe-A + unsafe-B #1/213: ok | ok | ok |
soft-safe-A + unsafe-B #1/213: ok | ok | ok |
hard-safe-A + unsafe-B #1/231: ok | ok | ok |
soft-safe-A + unsafe-B #1/231: ok | ok | ok |
hard-safe-A + unsafe-B #1/312: ok | ok | ok |
soft-safe-A + unsafe-B #1/312: ok | ok | ok |
hard-safe-A + unsafe-B #1/321: ok | ok | ok |
soft-safe-A + unsafe-B #1/321: ok | ok | ok |
hard-safe-A + unsafe-B #2/123: ok | ok | ok |
soft-safe-A + unsafe-B #2/123: ok | ok | ok |
hard-safe-A + unsafe-B #2/132: ok | ok | ok |
soft-safe-A + unsafe-B #2/132: ok | ok | ok |
hard-safe-A + unsafe-B #2/213: ok | ok | ok |
soft-safe-A + unsafe-B #2/213: ok | ok | ok |
hard-safe-A + unsafe-B #2/231: ok | ok | ok |
soft-safe-A + unsafe-B #2/231: ok | ok | ok |
hard-safe-A + unsafe-B #2/312: ok | ok | ok |
soft-safe-A + unsafe-B #2/312: ok | ok | ok |
hard-safe-A + unsafe-B #2/321: ok | ok | ok |
soft-safe-A + unsafe-B #2/321: ok | ok | ok |
hard-irq lock-inversion/123: ok | ok | ok |
soft-irq lock-inversion/123: ok | ok | ok |
hard-irq lock-inversion/132: ok | ok | ok |
soft-irq lock-inversion/132: ok | ok | ok |
hard-irq lock-inversion/213: ok | ok | ok |
soft-irq lock-inversion/213: ok | ok | ok |
hard-irq lock-inversion/231: ok | ok | ok |
soft-irq lock-inversion/231: ok | ok | ok |
hard-irq lock-inversion/312: ok | ok | ok |
soft-irq lock-inversion/312: ok | ok | ok |
hard-irq lock-inversion/321: ok | ok | ok |
soft-irq lock-inversion/321: ok | ok | ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 510792k/524208k available (1734k kernel code, 12768k reserved, 883k data, 184k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
vmalloc : 0xe0800000 - 0xfffb3000 ( 503 MB)
lowmem : 0xc0000000 - 0xdffec000 ( 511 MB)
.init : 0xc0390000 - 0xc03be000 ( 184 kB)
.data : 0xc02b18bc - 0xc038e504 ( 883 kB)
.text : 0xc0100000 - 0xc02b18bc (1734 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2824.37 BogoMIPS (lpj=5648750)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(TM) XP 1600+ stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 356 Objects with 38 Devices 115 Methods 24 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0820)
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
khelper used greatest stack depth: 3172 bytes left
net_namespace: 76 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
khelper used greatest stack depth: 3064 bytes left
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:................................................
Initialized 16/24 Regions 2/2 Fields 19/19 Buffers 11/14 Packages (365 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 41 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region e200-e27f claimed by vt82c686 HW-mon
PCI quirk: region e800-e80f claimed by vt82c686 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfffe0000-0xffffffff could not be reserved
system 00:02: ioport range 0x3f0-0x3f1 has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0xe400-0xe47f has been reserved
system 00:03: ioport range 0xe800-0xe80f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: b7000000-b7ffffff
PREFETCH window: b8000000-cfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Switched to NOHz mode on CPU #0
Freeing initrd memory: 3197k freed
Simple Boot Flag at 0x3a set to 0x1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Applying VIA southbridge workaround.
PCI: VIA PCI bridge detected. Disabling DAC.
PCI: Disabling Via external APIC routing
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=166.00 MHz
radeonfb: PLL min 20000 max 40000
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
Console: switching to colour frame buffer device 160x64
radeonfb (0000:01:00.0): ATI Radeon Ya
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 16 throttling states)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input2
TCP cubic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 184k freed
Write protecting the kernel text: 1736k
Write protecting the kernel read-only data: 700k
busybox used greatest stack depth: 2900 bytes left
exe used greatest stack depth: 2864 bytes left
exe used greatest stack depth: 2852 bytes left
exe used greatest stack depth: 2824 bytes left
exe used greatest stack depth: 2712 bytes left
input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
consolechars used greatest stack depth: 2464 bytes left
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:04.1: version 0.3.3
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA
ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
ata1.01: 160086528 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33
ata2.01: ATAPI: CD-950E/AKU, A4Q, max MWDMA2, CDB intr
ata2.00: configured for UDMA/33
ata2.01: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA ST340016A 3.75 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM E-IDE CD-950E/AKU A4Q PQ: 0 ANSI: 5
modprobe used greatest stack depth: 2152 bytes left
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
sd 0:0:1:0: [sdb] Attached SCSI disk
modprobe used greatest stack depth: 1964 bytes left
Attempting manual resume
ReiserFS: dm-10: found reiserfs format "3.6" with standard journal
ReiserFS: dm-10: using ordered data mode
ReiserFS: dm-10: journal params: device dm-10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-10: checking transaction log (dm-10)
ReiserFS: dm-10: Using r5 hash to sort names
exe used greatest stack depth: 1620 bytes left
Linux agpgart interface v0.102
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
agpgart: AGP aperture is 256M @ 0xd0000000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
via686a 0000:00:04.4: Forcing ISA address 0xe200
via686a 0000:00:04.4: Enabling sensors
parport_pc: VIA parallel port: io=0x378, irq=7
usbcore: registered new device driver usb
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
PCI: Enabling device 0000:00:0b.0 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL-8029 found at 0x9400, IRQ 11, 00:40:95:46:6e:2d.
ACPI: I/O resource vt596_smbus [0xe800-0xe807] conflicts with ACPI region SM00 [0xe800-0xe806]
ACPI: Device needs an ACPI driver
vt596_smbus: probe of 0000:00:04.4 failed with error -16
PCI: Enabling device 0000:00:09.0 (0014 -> 0016)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
input: PC Speaker as /class/input/input4
USB Universal Host Controller Interface driver v3.0
modprobe used greatest stack depth: 1552 bytes left
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
scsi 1:0:1:0: Attached scsi generic sg3 type 5
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[b6800000-b68007ff] Max Packet=[2048] IR/IT contexts=[8/8]
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:04.2: UHCI Host Controller
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:04.2: irq 5, io base 0x0000b400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.24-rc3-mm1 uhci_hcd
usb usb1: SerialNumber: 0000:00:04.2
ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:04.3: UHCI Host Controller
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:04.3: irq 5, io base 0x0000b000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.24-rc3-mm1 uhci_hcd
usb usb2: SerialNumber: 0000:00:04.3
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1: new device found, idVendor=05e3, idProduct=0606
usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
PCI: Enabling device 0000:00:0d.0 (0004 -> 0005)
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0120e085ca]
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
Loading Reiser4. See www.namesys.com for a description of Reiser4.
reiser4: dm-5: found disk format 4.0.0.
reiser4: dm-4: found disk format 4.0.0.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 16460
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdb, sector 19632
sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdb, sector 40037363
Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
lp0: using parport0 (interrupt-driven).
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.28.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
warning: process `avahi-daemon' sets w/ old libcap
warning: process `avahi-daemon' sets w/ old libcap
warning: process `avahi-daemon' sets w/ old libcap
warning: process `avahi-daemon' sets w/ old libcap
SysRq : Show Blocked State
task PC stack pid father
SysRq : Show Blocked State
task PC stack pid father
SysRq : Show Blocked State
task PC stack pid father
python used greatest stack depth: 1468 bytes left
[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 48666 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc3-mm1
# Wed Nov 21 18:02:26 2007
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hdb6"
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_PLATFORM=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_USB_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=m
# CONFIG_USB_XUSBATM is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_VIRTUALIZATION is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
#
# Layered filesystems
#
CONFIG_ECRYPT_FS=m
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_DEBUG_RODATA=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: usb mouse doesn't work
2007-11-21 18:23 ` 2.6.24-rc3-mm1: usb mouse doesn't work Kirill A. Shutemov
@ 2007-11-21 22:22 ` Andrew Morton
2007-11-22 10:17 ` Kirill A. Shutemov
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 22:22 UTC (permalink / raw)
To: Kirill A. Shutemov; +Cc: linux-kernel, linux-usb-devel
On Wed, 21 Nov 2007 20:23:46 +0200
"Kirill A. Shutemov" <k.shutemov@velesys.com> wrote:
> USB mouse(Logitech M-BT58) doesn't work. TouchPad works.
> dmesg after rmmod usbcore && modprobe uhci_hcd:
>
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKE] -> GSI 10 (level, low)
> -> IRQ 10
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000bf80
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> usb usb1: new device found, idVendor=0000, idProduct=0000
> usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: UHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> usb usb1: SerialNumber: 0000:00:1d.0
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKF] -> GSI 11 (level, low)
> -> IRQ 11
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf60
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> usb usb2: new device found, idVendor=0000, idProduct=0000
> usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: UHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> usb usb2: SerialNumber: 0000:00:1d.1
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKG] -> GSI 9 (level, low)
> -> IRQ 9
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usb usb3: new device found, idVendor=0000, idProduct=0000
> usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> usb usb3: SerialNumber: 0000:00:1d.2
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKH] -> GSI 7 (level, low)
> -> IRQ 7
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb usb4: new device found, idVendor=0000, idProduct=0000
> usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> usb usb4: SerialNumber: 0000:00:1d.3
> uhci_hcd 0000:00:1d.3: FGR not stopped yet!
>
I've had some strangenesses with USB lately. Sometimes running `lsusb'
makes the USB system notice a newly attached device.
Is that "FGR not stopped yet!" messgae new behaviour?
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 18:35 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
@ 2007-11-21 22:25 ` Andrew Morton
0 siblings, 0 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 22:25 UTC (permalink / raw)
To: Kirill A. Shutemov; +Cc: hidave.darkstar, linux-kernel, avi, tglx, mingo
On Wed, 21 Nov 2007 20:35:13 +0200
"Kirill A. Shutemov" <k.shutemov@velesys.com> wrote:
> Symbol init_level4_pgt is needed by nvidia module. Is it really need to
> unexport it?
It's our clever way of reducing the tester base so we don't get so many
bug reports.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-21 21:45 ` 2.6.24-rc3-mm1: I/O error, system hangs Laurent Riffard
@ 2007-11-21 22:41 ` Andrew Morton
2007-11-23 7:29 ` Laurent Riffard
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-21 22:41 UTC (permalink / raw)
To: Laurent Riffard; +Cc: linux-kernel, linux-ide
On Wed, 21 Nov 2007 22:45:22 +0100
Laurent Riffard <laurent.riffard@free.fr> wrote:
> Le 21.11.2007 05:45, Andrew Morton a écrit :
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>
> Hello,
>
> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
> that a bunch of task are blocked in "D" state, they seem to wait for
> some I/O completion. I can try to hand-copy some data if requested.
>
> I found these messages in dmesg:
>
> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
> EXT3-fs: mounted filesystem with ordered data mode.
> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> end_request: I/O error, dev sda, sector 16460
> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
> ReiserFS: sda7: using ordered data mode
> --
> ReiserFS: sda7: Using r5 hash to sort names
> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> end_request: I/O error, dev sdb, sector 19632
> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> end_request: I/O error, dev sdb, sector 40037363
> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
> lp0: using parport0 (interrupt-driven).
>
> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
>
> Maybe something is broken in pata_via driver ?
>
Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
touch pata_via.c.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1- powerpc link failure
2007-11-21 8:06 ` 2.6.24-rc3-mm1- powerpc link failure Kamalesh Babulal
@ 2007-11-21 22:52 ` Stephen Rothwell
0 siblings, 0 replies; 128+ messages in thread
From: Stephen Rothwell @ 2007-11-21 22:52 UTC (permalink / raw)
To: Kamalesh Babulal
Cc: Andrew Morton, linux-kernel, linuxppc-dev, Andy Whitcroft, Balbir Singh
[-- Attachment #1: Type: text/plain, Size: 681 bytes --]
On Wed, 21 Nov 2007 13:36:30 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>
> The kernel build fails on powerpc while linking,
Only for allyesconfig (or maybe some other config that builds a lot of
stuff in.
> AS .tmp_kallsyms3.o
> LD vmlinux.o
> ld: TOC section size exceeds 64k
> make: *** [vmlinux.o] Error 1
>
> The patch posted at http://lkml.org/lkml/2007/11/13/414, solves this
> failure.
However, that patch needs more testing especially to figure out what
performance effects it has. i.e. not for merging, yet.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 (sync is slow ?)
2007-11-21 8:49 ` Andrew Morton
@ 2007-11-22 3:06 ` KAMEZAWA Hiroyuki
2007-11-24 12:04 ` kosaki
1 sibling, 0 replies; 128+ messages in thread
From: KAMEZAWA Hiroyuki @ 2007-11-22 3:06 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, James.Bottomley
On Wed, 21 Nov 2007 00:49:09 -0800
Andrew Morton <akpm@linux-foundation.org> wrote:
> On Wed, 21 Nov 2007 17:42:15 +0900 KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
>
> > Hi, Andrew
> >
> > I got following result in 'sync' command.
> > It was too slow. (memory controller config is off ;)
> > I attaches my .config.
> > ==
> > [2.6.24-rc3-mm1]
> > [kamezawa@dr-test2 ~]$ dd if=/dev/zero of=./tmpfile bs=4096 count=100000
> > 100000+0 records in
> > 100000+0 records out
> > 409600000 bytes (410 MB) copied, 1.46706 seconds, 279 MB/s
> > [kamezawa@dr-test2 ~]$ time sync
> >
> > real 3m6.440s
> > user 0m0.000s
> > sys 0m0.133s
> Well I wonder how we did that.
>
> It seems OK here from a quick test (i386, ext3-on-IDE).
>
> Maybe device driver/block breakage?
>
I confirmed This slowdown is caused by git-scsi-misc.patch.
I'm sorry that I can't chase more and will be offline in this weekend.
This is scsi_mod information in /proc/modules
=
scsi_mod 409416 8 mptctl,sg,lpfc,scsi_transport_fc,mptspi,mptscsih,scsi_transport_spi,sd_mod, Live 0xa000000202818000
=
What information should I provide more ?
Thanks,
-Kame
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 19:33 ` Torsten Kaiser
@ 2007-11-22 10:04 ` Kirill A. Shutemov
0 siblings, 0 replies; 128+ messages in thread
From: Kirill A. Shutemov @ 2007-11-22 10:04 UTC (permalink / raw)
To: Torsten Kaiser
Cc: Andrew Morton, Kamalesh Babulal, linux-kernel, Andy Whitcroft,
Balbir Singh, linux-acpi, Thomas Gleixner, Ingo Molnar
[-- Attachment #1: Type: text/plain, Size: 782 bytes --]
On [Wed, 21.11.2007 20:33], Torsten Kaiser wrote:
> On Nov 21, 2007 10:29 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
> > On Wed, 21 Nov 2007 14:52:26 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> >
> > > Andrew Morton wrote:
> > > > On Wed, 21 Nov 2007 11:41:23 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
> > > >> ACPI: Core revision 20070126
> > > >> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> > > >> Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
>
> I seen an identical error.
This bug is also reproducible with qemu.
--
Regards, Kirill A. Shutemov
+ Belarus, Minsk
+ Velesys LLC, http://www.velesys.com/
+ ALT Linux Team, http://www.altlinux.com/
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: usb mouse doesn't work
2007-11-21 22:22 ` Andrew Morton
@ 2007-11-22 10:17 ` Kirill A. Shutemov
2007-11-22 17:07 ` [linux-usb-devel] " Alan Stern
0 siblings, 1 reply; 128+ messages in thread
From: Kirill A. Shutemov @ 2007-11-22 10:17 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-usb-devel
[-- Attachment #1: Type: text/plain, Size: 4084 bytes --]
On [Wed, 21.11.2007 14:22], Andrew Morton wrote:
> On Wed, 21 Nov 2007 20:23:46 +0200
> "Kirill A. Shutemov" <k.shutemov@velesys.com> wrote:
>
> > USB mouse(Logitech M-BT58) doesn't work. TouchPad works.
> > dmesg after rmmod usbcore && modprobe uhci_hcd:
> >
> > usbcore: registered new interface driver usbfs
> > usbcore: registered new interface driver hub
> > usbcore: registered new device driver usb
> > USB Universal Host Controller Interface driver v3.0
> > ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKE] -> GSI 10 (level, low)
> > -> IRQ 10
> > PCI: Setting latency timer of device 0000:00:1d.0 to 64
> > uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> > uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000bf80
> > usb usb1: configuration #1 chosen from 1 choice
> > hub 1-0:1.0: USB hub found
> > hub 1-0:1.0: 2 ports detected
> > usb usb1: new device found, idVendor=0000, idProduct=0000
> > usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb1: Product: UHCI Host Controller
> > usb usb1: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > usb usb1: SerialNumber: 0000:00:1d.0
> > ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKF] -> GSI 11 (level, low)
> > -> IRQ 11
> > PCI: Setting latency timer of device 0000:00:1d.1 to 64
> > uhci_hcd 0000:00:1d.1: UHCI Host Controller
> > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> > uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf60
> > usb usb2: configuration #1 chosen from 1 choice
> > hub 2-0:1.0: USB hub found
> > hub 2-0:1.0: 2 ports detected
> > usb usb2: new device found, idVendor=0000, idProduct=0000
> > usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb2: Product: UHCI Host Controller
> > usb usb2: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > usb usb2: SerialNumber: 0000:00:1d.1
> > ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKG] -> GSI 9 (level, low)
> > -> IRQ 9
> > PCI: Setting latency timer of device 0000:00:1d.2 to 64
> > uhci_hcd 0000:00:1d.2: UHCI Host Controller
> > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> > uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
> > usb usb3: configuration #1 chosen from 1 choice
> > hub 3-0:1.0: USB hub found
> > hub 3-0:1.0: 2 ports detected
> > usb usb3: new device found, idVendor=0000, idProduct=0000
> > usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb3: Product: UHCI Host Controller
> > usb usb3: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > usb usb3: SerialNumber: 0000:00:1d.2
> > ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKH] -> GSI 7 (level, low)
> > -> IRQ 7
> > PCI: Setting latency timer of device 0000:00:1d.3 to 64
> > uhci_hcd 0000:00:1d.3: UHCI Host Controller
> > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> > uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
> > usb usb4: configuration #1 chosen from 1 choice
> > hub 4-0:1.0: USB hub found
> > hub 4-0:1.0: 2 ports detected
> > usb usb4: new device found, idVendor=0000, idProduct=0000
> > usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb4: Product: UHCI Host Controller
> > usb usb4: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > usb usb4: SerialNumber: 0000:00:1d.3
> > uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> >
>
> I've had some strangenesses with USB lately. Sometimes running `lsusb'
> makes the USB system notice a newly attached device.
No. But I have new messages in dmesg:
uhci_hcd 0000:00:1d.3: FGR not stopped yet!
uhci_hcd 0000:00:1d.2: FGR not stopped yet!
uhci_hcd 0000:00:1d.1: FGR not stopped yet!
uhci_hcd 0000:00:1d.0: FGR not stopped yet!
> Is that "FGR not stopped yet!" messgae new behaviour?
It is a new message since 2.6.24-rc3. I have never try -mm tree before.
--
Regards, Kirill A. Shutemov
+ Belarus, Minsk
+ Velesys LLC, http://www.velesys.com/
+ ALT Linux Team, http://www.altlinux.com/
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (8 preceding siblings ...)
2007-11-21 21:45 ` 2.6.24-rc3-mm1: I/O error, system hangs Laurent Riffard
@ 2007-11-22 10:22 ` Kirill A. Shutemov
2007-11-23 0:18 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-23 1:39 ` 2.6.24-rc3-mm1 Gabriel C
` (2 subsequent siblings)
12 siblings, 1 reply; 128+ messages in thread
From: Kirill A. Shutemov @ 2007-11-22 10:22 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 239 bytes --]
On x86_64 'uname -m' return 'x86'. It break many userspace programs. apt
and rpm for example.
--
Regards, Kirill A. Shutemov
+ Belarus, Minsk
+ Velesys LLC, http://www.velesys.com/
+ ALT Linux Team, http://www.altlinux.com/
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [linux-usb-devel] 2.6.24-rc3-mm1: usb mouse doesn't work
2007-11-22 10:17 ` Kirill A. Shutemov
@ 2007-11-22 17:07 ` Alan Stern
2007-11-22 17:41 ` Marin Mitov
0 siblings, 1 reply; 128+ messages in thread
From: Alan Stern @ 2007-11-22 17:07 UTC (permalink / raw)
To: Kirill A. Shutemov; +Cc: Andrew Morton, linux-kernel, linux-usb-devel
On Thu, 22 Nov 2007, Kirill A. Shutemov wrote:
> > > uhci_hcd 0000:00:1d.3: UHCI Host Controller
> > > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> > > uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
> > > usb usb4: configuration #1 chosen from 1 choice
> > > hub 4-0:1.0: USB hub found
> > > hub 4-0:1.0: 2 ports detected
> > > usb usb4: new device found, idVendor=0000, idProduct=0000
> > > usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
> > > usb usb4: Product: UHCI Host Controller
> > > usb usb4: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > > usb usb4: SerialNumber: 0000:00:1d.3
> > > uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> > >
> >
> > I've had some strangenesses with USB lately. Sometimes running `lsusb'
> > makes the USB system notice a newly attached device.
>
> No. But I have new messages in dmesg:
>
> uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> uhci_hcd 0000:00:1d.2: FGR not stopped yet!
> uhci_hcd 0000:00:1d.1: FGR not stopped yet!
> uhci_hcd 0000:00:1d.0: FGR not stopped yet!
>
>
> > Is that "FGR not stopped yet!" messgae new behaviour?
>
> It is a new message since 2.6.24-rc3. I have never try -mm tree before.
These messages could indicate a timing problem. You can see the code
that writes the messages near the end of wakeup_rh() in
drivers/usb/host/uhci-hcd.c.
The message gets written if the controller hardware hasn't turned off a
particular bit after a 4-us delay. If the udelay() function wasn't
working right, it could cause this problem.
Alan Stern
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [linux-usb-devel] 2.6.24-rc3-mm1: usb mouse doesn't work
2007-11-22 17:07 ` [linux-usb-devel] " Alan Stern
@ 2007-11-22 17:41 ` Marin Mitov
2007-11-23 2:51 ` Alan Stern
0 siblings, 1 reply; 128+ messages in thread
From: Marin Mitov @ 2007-11-22 17:41 UTC (permalink / raw)
To: Alan Stern; +Cc: linux-kernel
On Thursday 22 November 2007 07:07:00 pm you wrote:
> On Thu, 22 Nov 2007, Kirill A. Shutemov wrote:
> > > > uhci_hcd 0000:00:1d.3: UHCI Host Controller
> > > > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> > > > uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
> > > > usb usb4: configuration #1 chosen from 1 choice
> > > > hub 4-0:1.0: USB hub found
> > > > hub 4-0:1.0: 2 ports detected
> > > > usb usb4: new device found, idVendor=0000, idProduct=0000
> > > > usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
> > > > usb usb4: Product: UHCI Host Controller
> > > > usb usb4: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
> > > > usb usb4: SerialNumber: 0000:00:1d.3
> > > > uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> > >
> > > I've had some strangenesses with USB lately. Sometimes running `lsusb'
> > > makes the USB system notice a newly attached device.
> >
> > No. But I have new messages in dmesg:
> >
> > uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> > uhci_hcd 0000:00:1d.2: FGR not stopped yet!
> > uhci_hcd 0000:00:1d.1: FGR not stopped yet!
> > uhci_hcd 0000:00:1d.0: FGR not stopped yet!
> >
> > > Is that "FGR not stopped yet!" messgae new behaviour?
> >
> > It is a new message since 2.6.24-rc3. I have never try -mm tree before.
>
> These messages could indicate a timing problem. You can see the code
> that writes the messages near the end of wakeup_rh() in
> drivers/usb/host/uhci-hcd.c.
>
> The message gets written if the controller hardware hasn't turned off a
> particular bit after a 4-us delay. If the udelay() function wasn't
> working right, it could cause this problem.
udelay() _is_ OK for 2.6.24-rc3, so it is not the cause of the problem
Marin Mitov
>
> Alan Stern
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-22 10:22 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
@ 2007-11-23 0:18 ` Andrew Morton
2007-11-23 0:48 ` 2.6.24-rc3-mm1 Thomas Gleixner
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-23 0:18 UTC (permalink / raw)
To: Kirill A. Shutemov
Cc: linux-kernel, Sam Ravnborg, Thomas Gleixner, Ingo Molnar
On Thu, 22 Nov 2007 12:22:05 +0200 "Kirill A. Shutemov" <k.shutemov@velesys.com> wrote:
> On x86_64 'uname -m' return 'x86'. It break many userspace programs. apt
> and rpm for example.
>
Yes, there have been various discussions about this. I think Sam is cooking up
a fix?
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-23 0:18 ` 2.6.24-rc3-mm1 Andrew Morton
@ 2007-11-23 0:48 ` Thomas Gleixner
2007-11-23 6:05 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
0 siblings, 1 reply; 128+ messages in thread
From: Thomas Gleixner @ 2007-11-23 0:48 UTC (permalink / raw)
To: Andrew Morton
Cc: Kirill A. Shutemov, LKML, Sam Ravnborg, Andreas Herrmann, Ingo Molnar
On Thu, 22 Nov 2007, Andrew Morton wrote:
> On Thu, 22 Nov 2007 12:22:05 +0200 "Kirill A. Shutemov" <k.shutemov@velesys.com> wrote:
>
> > On x86_64 'uname -m' return 'x86'. It break many userspace programs. apt
> > and rpm for example.
> >
>
> Yes, there have been various discussions about this. I think Sam is cooking up
> a fix?
http://lkml.org/lkml/2007/11/19/323
I push it Linus wards ASAP.
Thanks,
tglx
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (9 preceding siblings ...)
2007-11-22 10:22 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
@ 2007-11-23 1:39 ` Gabriel C
2007-11-23 4:12 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-26 19:13 ` 2.6.24-rc3-mm1 Randy Dunlap
2007-11-27 7:16 ` 2.6.24-rc3-mm1 - brick my Dell Latitude D820 Valdis.Kletnieks
12 siblings, 1 reply; 128+ messages in thread
From: Gabriel C @ 2007-11-23 1:39 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-scsi
I have some warnings on each SCSI disc:
...
[ 30.724410] scsi 0:0:0:0: Direct-Access SEAGATE ST318406LW 0109 PQ: 0 ANSI: 3
[ 30.724419] scsi0:A:0:0: Tagged Queuing enabled. Depth 32
[ 30.724435] target0:0:0: Beginning Domain Validation
[ 30.724446] target0:0:0: Domain Validation Initial Inquiry Failed <--
[ 30.724572] target0:0:0: Ending Domain Validation
[ 30.729747] scsi 0:0:1:0: Direct-Access FUJITSU MAH3182MP 0114 PQ: 0 ANSI: 4
[ 30.729754] scsi0:A:1:0: Tagged Queuing enabled. Depth 32
[ 30.729771] target0:0:1: Beginning Domain Validation
[ 30.729780] target0:0:1: Domain Validation Initial Inquiry Failed <--
[ 30.729908] target0:0:1: Ending Domain Validation
...
no idea whatever this is related but buffered disk reads are 2.XX MB/sec and the box is somewhat laggy.
hdparm -t on sda and sdb reports :
/dev/sda:
Timing buffered disk reads: 8 MB in 3.26 seconds = 2.46 MB/sec
/dev/sdb:
Timing buffered disk reads: 8 MB in 3.56 seconds = 2.25 MB/sec
My IDE discs are fine.
Please let me know if you need my config or any other informations.
Gabriel
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [linux-usb-devel] 2.6.24-rc3-mm1: usb mouse doesn't work
2007-11-22 17:41 ` Marin Mitov
@ 2007-11-23 2:51 ` Alan Stern
2007-11-23 5:19 ` Kirill A. Shutemov
0 siblings, 1 reply; 128+ messages in thread
From: Alan Stern @ 2007-11-23 2:51 UTC (permalink / raw)
To: Marin Mitov; +Cc: Kirill A. Shutemov, Kernel development list
On Thu, 22 Nov 2007, Marin Mitov wrote:
> > > > I've had some strangenesses with USB lately. Sometimes running `lsusb'
> > > > makes the USB system notice a newly attached device.
> > >
> > > No. But I have new messages in dmesg:
> > >
> > > uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> > > uhci_hcd 0000:00:1d.2: FGR not stopped yet!
> > > uhci_hcd 0000:00:1d.1: FGR not stopped yet!
> > > uhci_hcd 0000:00:1d.0: FGR not stopped yet!
> > >
> > > > Is that "FGR not stopped yet!" messgae new behaviour?
> > >
> > > It is a new message since 2.6.24-rc3. I have never try -mm tree before.
> >
> > These messages could indicate a timing problem. You can see the code
> > that writes the messages near the end of wakeup_rh() in
> > drivers/usb/host/uhci-hcd.c.
> >
> > The message gets written if the controller hardware hasn't turned off a
> > particular bit after a 4-us delay. If the udelay() function wasn't
> > working right, it could cause this problem.
>
> udelay() _is_ OK for 2.6.24-rc3, so it is not the cause of the problem
But is it OK for 2.6.24-rc3-mm1? Kirill said specifically that
2.6.24-rc3 does not display the message but 2.6.24-rc3-mm1 does.
Alan Stern
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-23 1:39 ` 2.6.24-rc3-mm1 Gabriel C
@ 2007-11-23 4:12 ` Andrew Morton
2007-11-23 5:55 ` 2.6.24-rc3-mm1 Gabriel C
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-23 4:12 UTC (permalink / raw)
To: Gabriel C; +Cc: linux-kernel, linux-scsi
On Fri, 23 Nov 2007 02:39:08 +0100 Gabriel C <nix.or.die@googlemail.com> wrote:
> I have some warnings on each SCSI disc:
>
>
> ...
>
> [ 30.724410] scsi 0:0:0:0: Direct-Access SEAGATE ST318406LW 0109 PQ: 0 ANSI: 3
> [ 30.724419] scsi0:A:0:0: Tagged Queuing enabled. Depth 32
> [ 30.724435] target0:0:0: Beginning Domain Validation
> [ 30.724446] target0:0:0: Domain Validation Initial Inquiry Failed <--
> [ 30.724572] target0:0:0: Ending Domain Validation
> [ 30.729747] scsi 0:0:1:0: Direct-Access FUJITSU MAH3182MP 0114 PQ: 0 ANSI: 4
> [ 30.729754] scsi0:A:1:0: Tagged Queuing enabled. Depth 32
> [ 30.729771] target0:0:1: Beginning Domain Validation
> [ 30.729780] target0:0:1: Domain Validation Initial Inquiry Failed <--
> [ 30.729908] target0:0:1: Ending Domain Validation
>
Don't know what would have caused that. But yes, something is wrong in
scsi land.
>
> no idea whatever this is related but buffered disk reads are 2.XX MB/sec and the box is somewhat laggy.
>
> hdparm -t on sda and sdb reports :
>
> /dev/sda:
> Timing buffered disk reads: 8 MB in 3.26 seconds = 2.46 MB/sec
>
> /dev/sdb:
> Timing buffered disk reads: 8 MB in 3.56 seconds = 2.25 MB/sec
>
> My IDE discs are fine.
>
> Please let me know if you need my config or any other informations.
>
And you're the second to report very slow scsi throughput in 2.6.24-rc3-mm1.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [linux-usb-devel] 2.6.24-rc3-mm1: usb mouse doesn't work
2007-11-23 2:51 ` Alan Stern
@ 2007-11-23 5:19 ` Kirill A. Shutemov
2007-11-23 16:21 ` Alan Stern
2007-12-31 21:06 ` Alan Stern
0 siblings, 2 replies; 128+ messages in thread
From: Kirill A. Shutemov @ 2007-11-23 5:19 UTC (permalink / raw)
To: Alan Stern; +Cc: Marin Mitov, Kernel development list
[-- Attachment #1: Type: text/plain, Size: 1463 bytes --]
On [Thu, 22.11.2007 21:51], Alan Stern wrote:
> On Thu, 22 Nov 2007, Marin Mitov wrote:
>
> > > > > I've had some strangenesses with USB lately. Sometimes running `lsusb'
> > > > > makes the USB system notice a newly attached device.
> > > >
> > > > No. But I have new messages in dmesg:
> > > >
> > > > uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> > > > uhci_hcd 0000:00:1d.2: FGR not stopped yet!
> > > > uhci_hcd 0000:00:1d.1: FGR not stopped yet!
> > > > uhci_hcd 0000:00:1d.0: FGR not stopped yet!
> > > >
> > > > > Is that "FGR not stopped yet!" messgae new behaviour?
> > > >
> > > > It is a new message since 2.6.24-rc3. I have never try -mm tree before.
> > >
> > > These messages could indicate a timing problem. You can see the code
> > > that writes the messages near the end of wakeup_rh() in
> > > drivers/usb/host/uhci-hcd.c.
> > >
> > > The message gets written if the controller hardware hasn't turned off a
> > > particular bit after a 4-us delay. If the udelay() function wasn't
> > > working right, it could cause this problem.
> >
> > udelay() _is_ OK for 2.6.24-rc3, so it is not the cause of the problem
>
> But is it OK for 2.6.24-rc3-mm1? Kirill said specifically that
> 2.6.24-rc3 does not display the message but 2.6.24-rc3-mm1 does.
How can I test it?
--
Regards, Kirill A. Shutemov
+ Belarus, Minsk
+ Velesys LLC, http://www.velesys.com/
+ ALT Linux Team, http://www.altlinux.com/
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-23 4:12 ` 2.6.24-rc3-mm1 Andrew Morton
@ 2007-11-23 5:55 ` Gabriel C
2007-11-27 6:15 ` 2.6.24-rc3-mm1 Andrew Morton
0 siblings, 1 reply; 128+ messages in thread
From: Gabriel C @ 2007-11-23 5:55 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-scsi, Hannes Reinecke, James Bottomley
Andrew Morton wrote:
> On Fri, 23 Nov 2007 02:39:08 +0100 Gabriel C <nix.or.die@googlemail.com> wrote:
>
>> I have some warnings on each SCSI disc:
>>
>>
>> ...
>>
>> [ 30.724410] scsi 0:0:0:0: Direct-Access SEAGATE ST318406LW 0109 PQ: 0 ANSI: 3
>> [ 30.724419] scsi0:A:0:0: Tagged Queuing enabled. Depth 32
>> [ 30.724435] target0:0:0: Beginning Domain Validation
>> [ 30.724446] target0:0:0: Domain Validation Initial Inquiry Failed <--
>> [ 30.724572] target0:0:0: Ending Domain Validation
>> [ 30.729747] scsi 0:0:1:0: Direct-Access FUJITSU MAH3182MP 0114 PQ: 0 ANSI: 4
>> [ 30.729754] scsi0:A:1:0: Tagged Queuing enabled. Depth 32
>> [ 30.729771] target0:0:1: Beginning Domain Validation
>> [ 30.729780] target0:0:1: Domain Validation Initial Inquiry Failed <--
>> [ 30.729908] target0:0:1: Ending Domain Validation
>>
>
> Don't know what would have caused that. But yes, something is wrong in
> scsi land.
Actually I'm lucky the author didn't fix that FIXME in scsi_transport_spi.c and I still can boot ;)
>
>> no idea whatever this is related but buffered disk reads are 2.XX MB/sec and the box is somewhat laggy.
>>
>> hdparm -t on sda and sdb reports :
>>
>> /dev/sda:
>> Timing buffered disk reads: 8 MB in 3.26 seconds = 2.46 MB/sec
>>
>> /dev/sdb:
>> Timing buffered disk reads: 8 MB in 3.56 seconds = 2.25 MB/sec
>>
>> My IDE discs are fine.
>>
>> Please let me know if you need my config or any other informations.
>>
>
> And you're the second to report very slow scsi throughput in 2.6.24-rc3-mm1.
>
I found the commit which cause these problems , it is in git-scsi-misc patch and reverting it fixes both problems for me.
http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=commitdiff_plain;h=8655a546c83fc43f0a73416bbd126d02de7ad6c0;hp=5bc717b6bdaaf52edf365eb7d9d8c89fec79df5d
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-23 0:48 ` 2.6.24-rc3-mm1 Thomas Gleixner
@ 2007-11-23 6:05 ` Kirill A. Shutemov
2007-11-23 8:59 ` 2.6.24-rc3-mm1 Andreas Herrmann
0 siblings, 1 reply; 128+ messages in thread
From: Kirill A. Shutemov @ 2007-11-23 6:05 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Andrew Morton, LKML, Sam Ravnborg, Andreas Herrmann, Ingo Molnar
[-- Attachment #1: Type: text/plain, Size: 1086 bytes --]
On [Fri, 23.11.2007 01:48], Thomas Gleixner wrote:
> On Thu, 22 Nov 2007, Andrew Morton wrote:
>
> > On Thu, 22 Nov 2007 12:22:05 +0200 "Kirill A. Shutemov" <k.shutemov@velesys.com> wrote:
> >
> > > On x86_64 'uname -m' return 'x86'. It break many userspace programs. apt
> > > and rpm for example.
> > >
> >
> > Yes, there have been various discussions about this. I think Sam is cooking up
> > a fix?
>
> http://lkml.org/lkml/2007/11/19/323
>
> I push it Linus wards ASAP.
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 116b03a..7aa1dc6 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -11,10 +11,9 @@ endif
$(srctree)/arch/x86/Makefile%: ;
ifeq ($(CONFIG_X86_32),y)
+ UTS_MACHINE := i386
include $(srctree)/arch/x86/Makefile_32
else
+ UTS_MACHINE := x86_64
include $(srctree)/arch/x86/Makefile_64
endif
Many programs expect i686 on Pentium II.
--
Regards, Kirill A. Shutemov
+ Belarus, Minsk
+ Velesys LLC, http://www.velesys.com/
+ ALT Linux Team, http://www.altlinux.com/
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply related [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-21 22:41 ` Andrew Morton
@ 2007-11-23 7:29 ` Laurent Riffard
2007-11-23 7:51 ` Hannes Reinecke
0 siblings, 1 reply; 128+ messages in thread
From: Laurent Riffard @ 2007-11-23 7:29 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-ide, James Bottomley, linux-scsi
Le 21.11.2007 23:41, Andrew Morton a écrit :
> On Wed, 21 Nov 2007 22:45:22 +0100
> Laurent Riffard <laurent.riffard@free.fr> wrote:
>
>> Le 21.11.2007 05:45, Andrew Morton a écrit :
>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>> Hello,
>>
>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
>> that a bunch of task are blocked in "D" state, they seem to wait for
>> some I/O completion. I can try to hand-copy some data if requested.
>>
>> I found these messages in dmesg:
>>
>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
>> EXT3-fs: mounted filesystem with ordered data mode.
>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>> end_request: I/O error, dev sda, sector 16460
>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>> ReiserFS: sda7: using ordered data mode
>> --
>> ReiserFS: sda7: Using r5 hash to sort names
>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>> end_request: I/O error, dev sdb, sector 19632
>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>> end_request: I/O error, dev sdb, sector 40037363
>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
>> lp0: using parport0 (interrupt-driven).
>>
>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
>>
>> Maybe something is broken in pata_via driver ?
>>
>
> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
> touch pata_via.c.
None of the above...
I did a bisection, it spotted git-scsi-misc.patch.
I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
requeue requests if REQ_FAILFAST is set" is the real culprit. The other
commits are touching documentation or drivers I don't use. I'll try
to revert only this one this evening.
--
laurent
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-23 7:29 ` Laurent Riffard
@ 2007-11-23 7:51 ` Hannes Reinecke
2007-11-23 11:38 ` Hannes Reinecke
0 siblings, 1 reply; 128+ messages in thread
From: Hannes Reinecke @ 2007-11-23 7:51 UTC (permalink / raw)
To: Laurent Riffard
Cc: Andrew Morton, linux-kernel, linux-ide, James Bottomley, linux-scsi
Laurent Riffard wrote:
> Le 21.11.2007 23:41, Andrew Morton a écrit :
>> On Wed, 21 Nov 2007 22:45:22 +0100
>> Laurent Riffard <laurent.riffard@free.fr> wrote:
>>
>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>>> Hello,
>>>
>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
>>> that a bunch of task are blocked in "D" state, they seem to wait for
>>> some I/O completion. I can try to hand-copy some data if requested.
>>>
>>> I found these messages in dmesg:
>>>
>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>> end_request: I/O error, dev sda, sector 16460
>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>>> ReiserFS: sda7: using ordered data mode
>>> --
>>> ReiserFS: sda7: Using r5 hash to sort names
>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>> end_request: I/O error, dev sdb, sector 19632
>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>> end_request: I/O error, dev sdb, sector 40037363
>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
>>> lp0: using parport0 (interrupt-driven).
>>>
>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
>>>
>>> Maybe something is broken in pata_via driver ?
>>>
>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
>> touch pata_via.c.
>
> None of the above...
>
> I did a bisection, it spotted git-scsi-misc.patch.
> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
>
> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
> commits are touching documentation or drivers I don't use. I'll try
> to revert only this one this evening.
>
Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
I shouldn't. Checking ...
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-23 6:05 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
@ 2007-11-23 8:59 ` Andreas Herrmann
0 siblings, 0 replies; 128+ messages in thread
From: Andreas Herrmann @ 2007-11-23 8:59 UTC (permalink / raw)
To: Kirill A. Shutemov
Cc: Thomas Gleixner, Andrew Morton, LKML, Sam Ravnborg, Ingo Molnar
On Fri, Nov 23, 2007 at 08:05:44AM +0200, Kirill A. Shutemov wrote:
> On [Fri, 23.11.2007 01:48], Thomas Gleixner wrote:
> > On Thu, 22 Nov 2007, Andrew Morton wrote:
> >
> > > On Thu, 22 Nov 2007 12:22:05 +0200 "Kirill A. Shutemov" <k.shutemov@velesys.com> wrote:
> > >
> > > > On x86_64 'uname -m' return 'x86'. It break many userspace programs. apt
> > > > and rpm for example.
> > > >
> > >
> > > Yes, there have been various discussions about this. I think Sam is cooking up
> > > a fix?
> >
> > http://lkml.org/lkml/2007/11/19/323
> >
> > I push it Linus wards ASAP.
> diff --git a/arch/x86/Makefile b/arch/x86/Makefile
> index 116b03a..7aa1dc6 100644
> --- a/arch/x86/Makefile
> +++ b/arch/x86/Makefile
> @@ -11,10 +11,9 @@ endif
> $(srctree)/arch/x86/Makefile%: ;
>
> ifeq ($(CONFIG_X86_32),y)
> + UTS_MACHINE := i386
> include $(srctree)/arch/x86/Makefile_32
> else
> + UTS_MACHINE := x86_64
> include $(srctree)/arch/x86/Makefile_64
> endif
>
> Many programs expect i686 on Pentium II.
Yes, but this is done during boot.
Then the kernel overwrites "i386" to become "i686" for such CPUs.
That is why I've seen "x66" after boot when UTS_MACHINE at build-time
was "x86" with 'make ARCH=x86'.
For more details see:
http://marc.info/?l=linux-kernel&m=119521309415545&w=2
Regards,
Andreas
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-23 7:51 ` Hannes Reinecke
@ 2007-11-23 11:38 ` Hannes Reinecke
2007-11-23 17:52 ` Laurent Riffard
2007-11-24 17:44 ` James Bottomley
0 siblings, 2 replies; 128+ messages in thread
From: Hannes Reinecke @ 2007-11-23 11:38 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Laurent Riffard, Andrew Morton, linux-kernel, linux-ide,
James Bottomley, linux-scsi
[-- Attachment #1: Type: text/plain, Size: 2784 bytes --]
Hannes Reinecke wrote:
> Laurent Riffard wrote:
>> Le 21.11.2007 23:41, Andrew Morton a écrit :
>>> On Wed, 21 Nov 2007 22:45:22 +0100
>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
>>>
>>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>>>> Hello,
>>>>
>>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
>>>> that a bunch of task are blocked in "D" state, they seem to wait for
>>>> some I/O completion. I can try to hand-copy some data if requested.
>>>>
>>>> I found these messages in dmesg:
>>>>
>>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>> end_request: I/O error, dev sda, sector 16460
>>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>>>> ReiserFS: sda7: using ordered data mode
>>>> --
>>>> ReiserFS: sda7: Using r5 hash to sort names
>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>> end_request: I/O error, dev sdb, sector 19632
>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>> end_request: I/O error, dev sdb, sector 40037363
>>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
>>>> lp0: using parport0 (interrupt-driven).
>>>>
>>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
>>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
>>>>
>>>> Maybe something is broken in pata_via driver ?
>>>>
>>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
>>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
>>> touch pata_via.c.
>> None of the above...
>>
>> I did a bisection, it spotted git-scsi-misc.patch.
>> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
>>
>> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
>> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
>> commits are touching documentation or drivers I don't use. I'll try
>> to revert only this one this evening.
>>
> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
> I shouldn't. Checking ...
>
Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
James, please apply.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
[-- Attachment #2: scsi-misc-fix-spi-validation --]
[-- Type: text/plain, Size: 1015 bytes --]
Fix SPI Domain validation
This fixes a thinko of the FAILFAST handling: when we get
a request with FAILFAST set, we still have to evaluate the
PREEMPT flag to decide if this request should be passed through.
Signed-off-by: Hannes Reinecke <hare@suse.de>
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 13e7e09..9ec1566 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1284,13 +1284,15 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
/*
* If the devices is blocked we defer normal commands.
*/
- if (!(req->cmd_flags & REQ_PREEMPT))
- ret = BLKPREP_DEFER;
- /*
- * Return failfast requests immediately
- */
- if (req->cmd_flags & REQ_FAILFAST)
- ret = BLKPREP_KILL;
+ if (!(req->cmd_flags & REQ_PREEMPT)) {
+ /*
+ * Return failfast requests immediately
+ */
+ if (req->cmd_flags & REQ_FAILFAST)
+ ret = BLKPREP_KILL;
+ else
+ ret = BLKPREP_DEFER;
+ }
break;
default:
/*
^ permalink raw reply related [flat|nested] 128+ messages in thread
* Re: [linux-usb-devel] 2.6.24-rc3-mm1: usb mouse doesn't work
2007-11-23 5:19 ` Kirill A. Shutemov
@ 2007-11-23 16:21 ` Alan Stern
2007-12-31 21:06 ` Alan Stern
1 sibling, 0 replies; 128+ messages in thread
From: Alan Stern @ 2007-11-23 16:21 UTC (permalink / raw)
To: Kirill A. Shutemov; +Cc: Marin Mitov, Kernel development list
On Fri, 23 Nov 2007, Kirill A. Shutemov wrote:
> On [Thu, 22.11.2007 21:51], Alan Stern wrote:
> > On Thu, 22 Nov 2007, Marin Mitov wrote:
> >
> > > > > > I've had some strangenesses with USB lately. Sometimes running `lsusb'
> > > > > > makes the USB system notice a newly attached device.
> > > > >
> > > > > No. But I have new messages in dmesg:
> > > > >
> > > > > uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> > > > > uhci_hcd 0000:00:1d.2: FGR not stopped yet!
> > > > > uhci_hcd 0000:00:1d.1: FGR not stopped yet!
> > > > > uhci_hcd 0000:00:1d.0: FGR not stopped yet!
> > > > >
> > > > > > Is that "FGR not stopped yet!" messgae new behaviour?
> > > > >
> > > > > It is a new message since 2.6.24-rc3. I have never try -mm tree before.
> > > >
> > > > These messages could indicate a timing problem. You can see the code
> > > > that writes the messages near the end of wakeup_rh() in
> > > > drivers/usb/host/uhci-hcd.c.
> > > >
> > > > The message gets written if the controller hardware hasn't turned off a
> > > > particular bit after a 4-us delay. If the udelay() function wasn't
> > > > working right, it could cause this problem.
> > >
> > > udelay() _is_ OK for 2.6.24-rc3, so it is not the cause of the problem
> >
> > But is it OK for 2.6.24-rc3-mm1? Kirill said specifically that
> > 2.6.24-rc3 does not display the message but 2.6.24-rc3-mm1 does.
>
> How can I test it?
Add some printk statements to the wakeup_rh() routine: Display the
value of inw(uhci->io_addr + USBCMD) in hex, both before and after the
udelay(4) line. Try doing this for both 2.6.24-rc3 and 2.6.24-rc3-mm1
so you can compare the values for the two different kernels.
Also, enable CONFIG_PRINTK_TIME.
Alan Stern
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-23 11:38 ` Hannes Reinecke
@ 2007-11-23 17:52 ` Laurent Riffard
2007-11-24 6:42 ` James Bottomley
2007-11-24 17:44 ` James Bottomley
1 sibling, 1 reply; 128+ messages in thread
From: Laurent Riffard @ 2007-11-23 17:52 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Andrew Morton, linux-kernel, linux-ide, James Bottomley, linux-scsi
Le 23.11.2007 12:38, Hannes Reinecke a écrit :
> Hannes Reinecke wrote:
>> Laurent Riffard wrote:
>>> Le 21.11.2007 23:41, Andrew Morton a écrit :
>>>> On Wed, 21 Nov 2007 22:45:22 +0100
>>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
>>>>
>>>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
>>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>>>>> Hello,
>>>>>
>>>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
>>>>> that a bunch of task are blocked in "D" state, they seem to wait for
>>>>> some I/O completion. I can try to hand-copy some data if requested.
>>>>>
>>>>> I found these messages in dmesg:
>>>>>
>>>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>> end_request: I/O error, dev sda, sector 16460
>>>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>>>>> ReiserFS: sda7: using ordered data mode
>>>>> --
>>>>> ReiserFS: sda7: Using r5 hash to sort names
>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>> end_request: I/O error, dev sdb, sector 19632
>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>> end_request: I/O error, dev sdb, sector 40037363
>>>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
>>>>> lp0: using parport0 (interrupt-driven).
>>>>>
>>>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
>>>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
>>>>>
>>>>> Maybe something is broken in pata_via driver ?
>>>>>
>>>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
>>>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
>>>> touch pata_via.c.
>>> None of the above...
>>>
>>> I did a bisection, it spotted git-scsi-misc.patch.
>>> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
>>>
>>> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
>>> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
>>> commits are touching documentation or drivers I don't use. I'll try
>>> to revert only this one this evening.
I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
does fix the problem.
>> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
>> I shouldn't. Checking ...
>>
> Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
> when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
--
laurent
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 6:18 ` Andrew Morton
2007-11-21 9:22 ` Kamalesh Babulal
2007-11-21 19:22 ` Len Brown
@ 2007-11-24 0:49 ` Alexey Dobriyan
2007-11-26 19:39 ` Rik van Riel
3 siblings, 0 replies; 128+ messages in thread
From: Alexey Dobriyan @ 2007-11-24 0:49 UTC (permalink / raw)
To: Andrew Morton
Cc: Kamalesh Babulal, linux-kernel, Andy Whitcroft, Balbir Singh,
linux-acpi, Thomas Gleixner, Ingo Molnar
On Tue, Nov 20, 2007 at 10:18:39PM -0800, Andrew Morton wrote:
> On Wed, 21 Nov 2007 11:41:23 +0530 Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote:
>
> > Hi Andrew,
> >
> > Kernel panic's across different architectures like powerpc, x86_64,
>
> powerpc complains about IO-APICs??
>
> > Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
> > Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
> > Mount-cache hash table entries: 256
> > SMP alternatives: switching to UP code
> > ACPI: Core revision 20070126
Hmm. same date here. It's Asus P5B-E motheboard
> > ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> > Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
>
> ACPI or x86 breakage, I guess.
>
> Did 'noapic' work?
No! The box freezes somewhere after "Freeing unused kernel memory"...
Bisection points to git-x86.patch, though.
git-bisect start
# good: [f05092637dc0d9a3f2249c9b283b973e6e96b7d2] Linux 2.6.24-rc3
git-bisect good f05092637dc0d9a3f2249c9b283b973e6e96b7d2
# bad: [46c8c396d2c87b786a7fac615c289f85a18e53ce] w1-build-fix
git-bisect bad 46c8c396d2c87b786a7fac615c289f85a18e53ce
# bad: [4e22f4852c48e1eddfe04299e78c0456164abe86] frv-move-dma-macros-to-scatterlisth-for-consistency
git-bisect bad 4e22f4852c48e1eddfe04299e78c0456164abe86
# bad: [4e22f4852c48e1eddfe04299e78c0456164abe86] frv-move-dma-macros-to-scatterlisth-for-consistency
git-bisect bad 4e22f4852c48e1eddfe04299e78c0456164abe86
# good: [d5135f31313af2be37d8ccb71e2a42f8e221d8c4] ide-mm-ide-disk-extend-timeout-for-pio-out-commands
git-bisect good d5135f31313af2be37d8ccb71e2a42f8e221d8c4
# good: [6be815e83f506f4c39a46cf59014e29a95c5e6c4] iommu-sg-merging-call-blk_queue_segment_boundary-in-__scsi_alloc_queue
git-bisect good 6be815e83f506f4c39a46cf59014e29a95c5e6c4
# good: [6be815e83f506f4c39a46cf59014e29a95c5e6c4] iommu-sg-merging-call-blk_queue_segment_boundary-in-__scsi_alloc_queue
git-bisect good 6be815e83f506f4c39a46cf59014e29a95c5e6c4
# bad: [c792db6d06114a85e33a27c89e9e979f11b951c4] slub-fix-coding-style-violations
git-bisect bad c792db6d06114a85e33a27c89e9e979f11b951c4
# bad: [c792db6d06114a85e33a27c89e9e979f11b951c4] slub-fix-coding-style-violations
git-bisect bad c792db6d06114a85e33a27c89e9e979f11b951c4
# bad: [76f3939b76ff557f73720b57a16716196f04e407] x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2
git-bisect bad 76f3939b76ff557f73720b57a16716196f04e407
# good: [b8ba611566d8799a979b190d4bb14305ca64ee0e] sis-fb-driver-_ioctl32_conversion-functions-do-not-exist-in-recent-kernels
git-bisect good b8ba611566d8799a979b190d4bb14305ca64ee0e
# good: [e34995928859308d2abef1709332e2b12d36db2f] git-ipwireless_cs
git-bisect good e34995928859308d2abef1709332e2b12d36db2f
# bad: [f520abbbe11bc8253714bcd34aaaf19bdf82189e] git-x86-identify_cpu-fix
git-bisect bad f520abbbe11bc8253714bcd34aaaf19bdf82189e
I honestly tried fresh #mm from x86 tree -- the one which ends at commit
70be766db1105c0fc9aed8e954d0c343c1eda067 "x86: Add the RDC machine
specific reboot fixup". FWIW, commit "x86: validate against ACPI motherboard
resources" is innocent. After "x86: make stack size configurable" damn thing
wouldn't build and applying fixets from -mm doesn't help at 3AM.
Again, it's late here, I'll recheck today.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-23 17:52 ` Laurent Riffard
@ 2007-11-24 6:42 ` James Bottomley
2007-11-24 12:57 ` Laurent Riffard
0 siblings, 1 reply; 128+ messages in thread
From: James Bottomley @ 2007-11-24 6:42 UTC (permalink / raw)
To: Laurent Riffard
Cc: Hannes Reinecke, Andrew Morton, linux-kernel, linux-ide, linux-scsi
On Fri, 2007-11-23 at 18:52 +0100, Laurent Riffard wrote:
> Le 23.11.2007 12:38, Hannes Reinecke a écrit :
> > Hannes Reinecke wrote:
> >> Laurent Riffard wrote:
> >>> Le 21.11.2007 23:41, Andrew Morton a écrit :
> >>>> On Wed, 21 Nov 2007 22:45:22 +0100
> >>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
> >>>>
> >>>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
> >>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
> >>>>> Hello,
> >>>>>
> >>>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
> >>>>> that a bunch of task are blocked in "D" state, they seem to wait for
> >>>>> some I/O completion. I can try to hand-copy some data if requested.
> >>>>>
> >>>>> I found these messages in dmesg:
> >>>>>
> >>>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
> >>>>> EXT3-fs: mounted filesystem with ordered data mode.
> >>>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> >>>>> end_request: I/O error, dev sda, sector 16460
> >>>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
> >>>>> ReiserFS: sda7: using ordered data mode
> >>>>> --
> >>>>> ReiserFS: sda7: Using r5 hash to sort names
> >>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> >>>>> end_request: I/O error, dev sdb, sector 19632
> >>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> >>>>> end_request: I/O error, dev sdb, sector 40037363
> >>>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
> >>>>> lp0: using parport0 (interrupt-driven).
> >>>>>
> >>>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
> >>>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
> >>>>>
> >>>>> Maybe something is broken in pata_via driver ?
> >>>>>
> >>>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
> >>>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
> >>>> touch pata_via.c.
> >>> None of the above...
> >>>
> >>> I did a bisection, it spotted git-scsi-misc.patch.
> >>> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
> >>>
> >>> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
> >>> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
> >>> commits are touching documentation or drivers I don't use. I'll try
> >>> to revert only this one this evening.
>
> I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> does fix the problem.
>
> >> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
> >> I shouldn't. Checking ...
> >>
> > Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
> > when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
>
> Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
I think the problem is the way we treat BLOCKED and QUIESCED (the latter
is the state that the domain validation uses and which we cannot kill
fastfail on). It's definitely wrong to kill fastfail requests when the
state is QUIESCE.
This patch (which is applied on top of Hannes original) separates the
BLOCK and QUIESCE states correctly ... does this fix the problem?
James
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 13e7e09..a7cf23a 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1279,18 +1279,21 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
"rejecting I/O to dead device\n");
ret = BLKPREP_KILL;
break;
- case SDEV_QUIESCE:
case SDEV_BLOCK:
/*
- * If the devices is blocked we defer normal commands.
- */
- if (!(req->cmd_flags & REQ_PREEMPT))
- ret = BLKPREP_DEFER;
- /*
* Return failfast requests immediately
*/
if (req->cmd_flags & REQ_FAILFAST)
ret = BLKPREP_KILL;
+
+ /* fall through */
+
+ case SDEV_QUIESCE:
+ /*
+ * If the devices is blocked we defer normal commands.
+ */
+ if (!(req->cmd_flags & REQ_PREEMPT))
+ ret = BLKPREP_DEFER;
break;
default:
/*
^ permalink raw reply related [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 (sync is slow ?)
2007-11-21 8:49 ` Andrew Morton
2007-11-22 3:06 ` KAMEZAWA Hiroyuki
@ 2007-11-24 12:04 ` kosaki
2007-11-24 18:04 ` Gabriel C
1 sibling, 1 reply; 128+ messages in thread
From: kosaki @ 2007-11-24 12:04 UTC (permalink / raw)
To: Andrew Morton; +Cc: kosaki.motohiro, KAMEZAWA Hiroyuki, linux-kernel
Hi, Andrew
> > Hi, Andrew
> >
> > I got following result in 'sync' command.
> > It was too slow. (memory controller config is off ;)
> > I attaches my .config.
> > ==
(snip)
>
> Well I wonder how we did that.
>
> It seems OK here from a quick test (i386, ext3-on-IDE).
>
> Maybe device driver/block breakage?
I tested x86, ext3-on-SATA(/dev/sda).
It seems works well.
Hmm...
--
kosaki
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-24 6:42 ` James Bottomley
@ 2007-11-24 12:57 ` Laurent Riffard
2007-11-24 13:26 ` James Bottomley
0 siblings, 1 reply; 128+ messages in thread
From: Laurent Riffard @ 2007-11-24 12:57 UTC (permalink / raw)
To: James Bottomley
Cc: Hannes Reinecke, Andrew Morton, linux-kernel, linux-ide, linux-scsi
Le 24.11.2007 07:42, James Bottomley a écrit :
> On Fri, 2007-11-23 at 18:52 +0100, Laurent Riffard wrote:
>> Le 23.11.2007 12:38, Hannes Reinecke a écrit :
>>> Hannes Reinecke wrote:
>>>> Laurent Riffard wrote:
>>>>> Le 21.11.2007 23:41, Andrew Morton a écrit :
>>>>>> On Wed, 21 Nov 2007 22:45:22 +0100
>>>>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
>>>>>>
>>>>>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
>>>>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>>>>>>> Hello,
>>>>>>>
>>>>>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
>>>>>>> that a bunch of task are blocked in "D" state, they seem to wait for
>>>>>>> some I/O completion. I can try to hand-copy some data if requested.
>>>>>>>
>>>>>>> I found these messages in dmesg:
>>>>>>>
>>>>>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>> end_request: I/O error, dev sda, sector 16460
>>>>>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>>>>>>> ReiserFS: sda7: using ordered data mode
>>>>>>> --
>>>>>>> ReiserFS: sda7: Using r5 hash to sort names
>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>> end_request: I/O error, dev sdb, sector 19632
>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>> end_request: I/O error, dev sdb, sector 40037363
>>>>>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
>>>>>>> lp0: using parport0 (interrupt-driven).
>>>>>>>
>>>>>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
>>>>>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
>>>>>>>
>>>>>>> Maybe something is broken in pata_via driver ?
>>>>>>>
>>>>>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
>>>>>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
>>>>>> touch pata_via.c.
>>>>> None of the above...
>>>>>
>>>>> I did a bisection, it spotted git-scsi-misc.patch.
>>>>> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
>>>>>
>>>>> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
>>>>> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
>>>>> commits are touching documentation or drivers I don't use. I'll try
>>>>> to revert only this one this evening.
>> I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
>> does fix the problem.
>>
>>>> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
>>>> I shouldn't. Checking ...
>>>>
>>> Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
>>> when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
>> Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
>
> I think the problem is the way we treat BLOCKED and QUIESCED (the latter
> is the state that the domain validation uses and which we cannot kill
> fastfail on). It's definitely wrong to kill fastfail requests when the
> state is QUIESCE.
>
> This patch (which is applied on top of Hannes original) separates the
> BLOCK and QUIESCE states correctly ... does this fix the problem?
No, it doesn't help... (2.6.24-rc3-mm1 + your patch still has problems)
> James
>
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 13e7e09..a7cf23a 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -1279,18 +1279,21 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
> "rejecting I/O to dead device\n");
> ret = BLKPREP_KILL;
> break;
> - case SDEV_QUIESCE:
> case SDEV_BLOCK:
> /*
> - * If the devices is blocked we defer normal commands.
> - */
> - if (!(req->cmd_flags & REQ_PREEMPT))
> - ret = BLKPREP_DEFER;
> - /*
> * Return failfast requests immediately
> */
> if (req->cmd_flags & REQ_FAILFAST)
> ret = BLKPREP_KILL;
> +
> + /* fall through */
> +
> + case SDEV_QUIESCE:
> + /*
> + * If the devices is blocked we defer normal commands.
> + */
> + if (!(req->cmd_flags & REQ_PREEMPT))
> + ret = BLKPREP_DEFER;
> break;
> default:
> /*
>
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-24 12:57 ` Laurent Riffard
@ 2007-11-24 13:26 ` James Bottomley
2007-11-24 17:54 ` Gabriel C
2007-11-24 22:59 ` Laurent Riffard
0 siblings, 2 replies; 128+ messages in thread
From: James Bottomley @ 2007-11-24 13:26 UTC (permalink / raw)
To: Laurent Riffard
Cc: Hannes Reinecke, Andrew Morton, linux-kernel, linux-ide, linux-scsi
On Sat, 2007-11-24 at 13:57 +0100, Laurent Riffard wrote:
> Le 24.11.2007 07:42, James Bottomley a écrit :
> > On Fri, 2007-11-23 at 18:52 +0100, Laurent Riffard wrote:
> >> Le 23.11.2007 12:38, Hannes Reinecke a écrit :
> >>> Hannes Reinecke wrote:
> >>>> Laurent Riffard wrote:
> >>>>> Le 21.11.2007 23:41, Andrew Morton a écrit :
> >>>>>> On Wed, 21 Nov 2007 22:45:22 +0100
> >>>>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
> >>>>>>
> >>>>>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
> >>>>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
> >>>>>>> Hello,
> >>>>>>>
> >>>>>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
> >>>>>>> that a bunch of task are blocked in "D" state, they seem to wait for
> >>>>>>> some I/O completion. I can try to hand-copy some data if requested.
> >>>>>>>
> >>>>>>> I found these messages in dmesg:
> >>>>>>>
> >>>>>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
> >>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
> >>>>>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> >>>>>>> end_request: I/O error, dev sda, sector 16460
> >>>>>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
> >>>>>>> ReiserFS: sda7: using ordered data mode
> >>>>>>> --
> >>>>>>> ReiserFS: sda7: Using r5 hash to sort names
> >>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> >>>>>>> end_request: I/O error, dev sdb, sector 19632
> >>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> >>>>>>> end_request: I/O error, dev sdb, sector 40037363
> >>>>>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
> >>>>>>> lp0: using parport0 (interrupt-driven).
> >>>>>>>
> >>>>>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
> >>>>>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
> >>>>>>>
> >>>>>>> Maybe something is broken in pata_via driver ?
> >>>>>>>
> >>>>>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
> >>>>>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
> >>>>>> touch pata_via.c.
> >>>>> None of the above...
> >>>>>
> >>>>> I did a bisection, it spotted git-scsi-misc.patch.
> >>>>> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
> >>>>>
> >>>>> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
> >>>>> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
> >>>>> commits are touching documentation or drivers I don't use. I'll try
> >>>>> to revert only this one this evening.
> >> I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> >> does fix the problem.
> >>
> >>>> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
> >>>> I shouldn't. Checking ...
> >>>>
> >>> Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
> >>> when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
> >> Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
> >
> > I think the problem is the way we treat BLOCKED and QUIESCED (the latter
> > is the state that the domain validation uses and which we cannot kill
> > fastfail on). It's definitely wrong to kill fastfail requests when the
> > state is QUIESCE.
> >
> > This patch (which is applied on top of Hannes original) separates the
> > BLOCK and QUIESCE states correctly ... does this fix the problem?
>
>
> No, it doesn't help... (2.6.24-rc3-mm1 + your patch still has problems)
OK, could you post dmesgs again, please. I actually tested this with an
aic79xx card, and for me it does cause Domain Validation to succeed
again.
James
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 9:58 ` Sam Ravnborg
2007-11-21 10:00 ` Avi Kivity
@ 2007-11-24 14:34 ` Adrian Bunk
1 sibling, 0 replies; 128+ messages in thread
From: Adrian Bunk @ 2007-11-24 14:34 UTC (permalink / raw)
To: Sam Ravnborg
Cc: Avi Kivity, Kamalesh Babulal, Andrew Morton, linux-kernel,
Andy Whitcroft
On Wed, Nov 21, 2007 at 10:58:21AM +0100, Sam Ravnborg wrote:
> On Wed, Nov 21, 2007 at 10:44:40AM +0200, Avi Kivity wrote:
> > Kamalesh Babulal wrote:
> > >Andrew Morton wrote:
> > >
> > >>On Wed, 21 Nov 2007 13:54:50 +0530 Kamalesh Babulal
> > >><kamalesh@linux.vnet.ibm.com> wrote:
> > >>
> > >>
> > >>>The make headers_check fails,
> > >>>
> > >>> CHECK include/linux/usb/gadgetfs.h
> > >>> CHECK include/linux/usb/ch9.h
> > >>> CHECK include/linux/usb/cdc.h
> > >>> CHECK include/linux/usb/audio.h
> > >>> CHECK include/linux/kvm.h
> > >>>/root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires
> > >>>asm/kvm.h, which does not exist in exported headers
> > >>>
> > >>hm, works for me, on i386 and x86_64. What's different over there?
> > >>
> > >Hi Andrew,
> > >
> > >It fails on the powerpc box, with allyesconfig option.
> > >
> > >
> >
> > How do we fix this? Export linux/kvm.h only on x86? Seems ugly.
>
> Is kvm x86 specific? Then move the .h file to asm-x86.
> Otherwise no good idea...
What about adding a whitelist in hdrcheck.sh?
For all practical purposes in userspace the compile error due to the
non-existing asm header should be fine, so there's no reason to change
the code in such cases.
> Sam
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-23 11:38 ` Hannes Reinecke
2007-11-23 17:52 ` Laurent Riffard
@ 2007-11-24 17:44 ` James Bottomley
2007-11-26 7:54 ` Hannes Reinecke
1 sibling, 1 reply; 128+ messages in thread
From: James Bottomley @ 2007-11-24 17:44 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Laurent Riffard, Andrew Morton, linux-kernel, linux-ide, linux-scsi
Probing intermittent failures in Domain Validation, even with the fixes
applied leads me to the conclusion that there are further problems with
this commit:
commit fc5eb4facedbd6d7117905e775cee1975f894e79
Author: Hannes Reinecke <hare@suse.de>
Date: Tue Nov 6 09:23:40 2007 +0100
[SCSI] Do not requeue requests if REQ_FAILFAST is set
The essence of the problems is that you're causing REQ_FAILFAST to
terminate commands with error on requeuing conditions, some of which are
relatively common on most SCSI devices. While this may be the correct
behaviour for multi-path, it's certainly wrong for the previously
understood meaning of REQ_FAILFAST, which was don't retry on error,
which is why domain validation and other applications use it to control
error handling, but don't expect to get failures for a simple requeue
are now spitting errors.
I honestly can't see that, even for the multi-path case, returning an
error when we're over queue depth is the correct thing to do (it may not
matter to something like a symmetrix, but an array that has a non-zero
cost associated with a path change, like a CPQ HSV or the AVT
controllers, will show fairly large slow downs if you do this). Even if
this is the desired behaviour (and I think that's a policy issue),
DID_NO_CONNECT is almost certainly the wrong error to be sending back.
This patch fixes up domain validation to work again correctly, however,
I really think it's just a bandaid. Do you want to rethink the above
commit?
James
Index: BUILD-2.6/drivers/scsi/scsi_lib.c
===================================================================
--- BUILD-2.6.orig/drivers/scsi/scsi_lib.c 2007-11-24 11:25:20.000000000 -0600
+++ BUILD-2.6/drivers/scsi/scsi_lib.c 2007-11-24 11:26:22.000000000 -0600
@@ -1552,7 +1552,8 @@ static void scsi_request_fn(struct reque
break;
if (!scsi_dev_queue_ready(q, sdev)) {
- if (req->cmd_flags & REQ_FAILFAST) {
+ if ((req->cmd_flags & REQ_FAILFAST) &&
+ !(req->cmd_flags & REQ_PREEMPT)) {
scsi_kill_request(req, q);
continue;
}
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-24 13:26 ` James Bottomley
@ 2007-11-24 17:54 ` Gabriel C
2007-11-24 18:04 ` James Bottomley
2007-11-24 22:59 ` Laurent Riffard
1 sibling, 1 reply; 128+ messages in thread
From: Gabriel C @ 2007-11-24 17:54 UTC (permalink / raw)
To: James Bottomley
Cc: Laurent Riffard, Hannes Reinecke, Andrew Morton, linux-kernel,
linux-ide, linux-scsi
James Bottomley wrote:
> On Sat, 2007-11-24 at 13:57 +0100, Laurent Riffard wrote:
>> Le 24.11.2007 07:42, James Bottomley a écrit :
>>> On Fri, 2007-11-23 at 18:52 +0100, Laurent Riffard wrote:
>>>> Le 23.11.2007 12:38, Hannes Reinecke a écrit :
>>>>> Hannes Reinecke wrote:
>>>>>> Laurent Riffard wrote:
>>>>>>> Le 21.11.2007 23:41, Andrew Morton a écrit :
>>>>>>>> On Wed, 21 Nov 2007 22:45:22 +0100
>>>>>>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
>>>>>>>>
>>>>>>>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
>>>>>>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
>>>>>>>>> that a bunch of task are blocked in "D" state, they seem to wait for
>>>>>>>>> some I/O completion. I can try to hand-copy some data if requested.
>>>>>>>>>
>>>>>>>>> I found these messages in dmesg:
>>>>>>>>>
>>>>>>>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>>>> end_request: I/O error, dev sda, sector 16460
>>>>>>>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>>>>>>>>> ReiserFS: sda7: using ordered data mode
>>>>>>>>> --
>>>>>>>>> ReiserFS: sda7: Using r5 hash to sort names
>>>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>>>> end_request: I/O error, dev sdb, sector 19632
>>>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>>>> end_request: I/O error, dev sdb, sector 40037363
>>>>>>>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
>>>>>>>>> lp0: using parport0 (interrupt-driven).
>>>>>>>>>
>>>>>>>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
>>>>>>>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
>>>>>>>>>
>>>>>>>>> Maybe something is broken in pata_via driver ?
>>>>>>>>>
>>>>>>>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
>>>>>>>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
>>>>>>>> touch pata_via.c.
>>>>>>> None of the above...
>>>>>>>
>>>>>>> I did a bisection, it spotted git-scsi-misc.patch.
>>>>>>> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
>>>>>>>
>>>>>>> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
>>>>>>> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
>>>>>>> commits are touching documentation or drivers I don't use. I'll try
>>>>>>> to revert only this one this evening.
>>>> I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
>>>> does fix the problem.
>>>>
>>>>>> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
>>>>>> I shouldn't. Checking ...
>>>>>>
>>>>> Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
>>>>> when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
>>>> Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
>>> I think the problem is the way we treat BLOCKED and QUIESCED (the latter
>>> is the state that the domain validation uses and which we cannot kill
>>> fastfail on). It's definitely wrong to kill fastfail requests when the
>>> state is QUIESCE.
>>>
>>> This patch (which is applied on top of Hannes original) separates the
>>> BLOCK and QUIESCE states correctly ... does this fix the problem?
>>
>> No, it doesn't help... (2.6.24-rc3-mm1 + your patch still has problems)
>
> OK, could you post dmesgs again, please. I actually tested this with an
> aic79xx card, and for me it does cause Domain Validation to succeed
> again.
>
Are the patches indeed to fix that problem as well ?
http://lkml.org/lkml/2007/11/23/5
> James
Gabriel
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-24 17:54 ` Gabriel C
@ 2007-11-24 18:04 ` James Bottomley
2007-11-24 18:08 ` Gabriel C
0 siblings, 1 reply; 128+ messages in thread
From: James Bottomley @ 2007-11-24 18:04 UTC (permalink / raw)
To: Gabriel C
Cc: Laurent Riffard, Hannes Reinecke, Andrew Morton, linux-kernel,
linux-ide, linux-scsi
On Sat, 2007-11-24 at 18:54 +0100, Gabriel C wrote:
> James Bottomley wrote:
> > On Sat, 2007-11-24 at 13:57 +0100, Laurent Riffard wrote:
> >> Le 24.11.2007 07:42, James Bottomley a écrit :
> >>> On Fri, 2007-11-23 at 18:52 +0100, Laurent Riffard wrote:
> >>>> Le 23.11.2007 12:38, Hannes Reinecke a écrit :
> >>>>> Hannes Reinecke wrote:
> >>>>>> Laurent Riffard wrote:
> >>>>>>> Le 21.11.2007 23:41, Andrew Morton a écrit :
> >>>>>>>> On Wed, 21 Nov 2007 22:45:22 +0100
> >>>>>>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
> >>>>>>>>
> >>>>>>>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
> >>>>>>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
> >>>>>>>>> Hello,
> >>>>>>>>>
> >>>>>>>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
> >>>>>>>>> that a bunch of task are blocked in "D" state, they seem to wait for
> >>>>>>>>> some I/O completion. I can try to hand-copy some data if requested.
> >>>>>>>>>
> >>>>>>>>> I found these messages in dmesg:
> >>>>>>>>>
> >>>>>>>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
> >>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
> >>>>>>>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> >>>>>>>>> end_request: I/O error, dev sda, sector 16460
> >>>>>>>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
> >>>>>>>>> ReiserFS: sda7: using ordered data mode
> >>>>>>>>> --
> >>>>>>>>> ReiserFS: sda7: Using r5 hash to sort names
> >>>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> >>>>>>>>> end_request: I/O error, dev sdb, sector 19632
> >>>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> >>>>>>>>> end_request: I/O error, dev sdb, sector 40037363
> >>>>>>>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
> >>>>>>>>> lp0: using parport0 (interrupt-driven).
> >>>>>>>>>
> >>>>>>>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
> >>>>>>>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
> >>>>>>>>>
> >>>>>>>>> Maybe something is broken in pata_via driver ?
> >>>>>>>>>
> >>>>>>>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
> >>>>>>>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
> >>>>>>>> touch pata_via.c.
> >>>>>>> None of the above...
> >>>>>>>
> >>>>>>> I did a bisection, it spotted git-scsi-misc.patch.
> >>>>>>> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
> >>>>>>>
> >>>>>>> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
> >>>>>>> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
> >>>>>>> commits are touching documentation or drivers I don't use. I'll try
> >>>>>>> to revert only this one this evening.
> >>>> I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> >>>> does fix the problem.
> >>>>
> >>>>>> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
> >>>>>> I shouldn't. Checking ...
> >>>>>>
> >>>>> Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
> >>>>> when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
> >>>> Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
> >>> I think the problem is the way we treat BLOCKED and QUIESCED (the latter
> >>> is the state that the domain validation uses and which we cannot kill
> >>> fastfail on). It's definitely wrong to kill fastfail requests when the
> >>> state is QUIESCE.
> >>>
> >>> This patch (which is applied on top of Hannes original) separates the
> >>> BLOCK and QUIESCE states correctly ... does this fix the problem?
> >>
> >> No, it doesn't help... (2.6.24-rc3-mm1 + your patch still has problems)
> >
> > OK, could you post dmesgs again, please. I actually tested this with an
> > aic79xx card, and for me it does cause Domain Validation to succeed
> > again.
> >
>
> Are the patches indeed to fix that problem as well ?
>
> http://lkml.org/lkml/2007/11/23/5
That dmesg is from an unknown SCSI card exhibiting Domain Validation
problems, so it's a reasonable probability, yes ... but you'll need the
additional hack I just did to prevent further intermittent failures.
James
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 (sync is slow ?)
2007-11-24 12:04 ` kosaki
@ 2007-11-24 18:04 ` Gabriel C
2007-11-26 7:06 ` KAMEZAWA Hiroyuki
0 siblings, 1 reply; 128+ messages in thread
From: Gabriel C @ 2007-11-24 18:04 UTC (permalink / raw)
To: kosaki; +Cc: Andrew Morton, KAMEZAWA Hiroyuki, linux-kernel
kosaki wrote:
> Hi, Andrew
>
>>> Hi, Andrew
>>>
>>> I got following result in 'sync' command.
>>> It was too slow. (memory controller config is off ;)
>>> I attaches my .config.
>>> ==
> (snip)
>> Well I wonder how we did that.
>>
>> It seems OK here from a quick test (i386, ext3-on-IDE).
>>
>> Maybe device driver/block breakage?
Try revert
http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=commitdiff_plain;h=8655a546c83fc43f0a73416bbd126d02de7ad6c0;hp=5bc717b6bdaaf52edf365eb7d9d8c89fec79df5d
See also :
http://lkml.org/lkml/2007/11/23/5
and search for '2.6.24-rc3-mm1: I/O error, system hangs' on LKML
>
> I tested x86, ext3-on-SATA(/dev/sda).
> It seems works well.
>
> Hmm...
IDE/SATA is fine here as well just SCSI broke
Regards,
Gabriel
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-24 18:04 ` James Bottomley
@ 2007-11-24 18:08 ` Gabriel C
2007-11-24 18:28 ` Gabriel C
0 siblings, 1 reply; 128+ messages in thread
From: Gabriel C @ 2007-11-24 18:08 UTC (permalink / raw)
To: James Bottomley
Cc: Laurent Riffard, Hannes Reinecke, Andrew Morton, linux-kernel,
linux-ide, linux-scsi
James Bottomley wrote:
> On Sat, 2007-11-24 at 18:54 +0100, Gabriel C wrote:
>> James Bottomley wrote:
>>> On Sat, 2007-11-24 at 13:57 +0100, Laurent Riffard wrote:
>>>> Le 24.11.2007 07:42, James Bottomley a écrit :
>>>>> On Fri, 2007-11-23 at 18:52 +0100, Laurent Riffard wrote:
>>>>>> Le 23.11.2007 12:38, Hannes Reinecke a écrit :
>>>>>>> Hannes Reinecke wrote:
>>>>>>>> Laurent Riffard wrote:
>>>>>>>>> Le 21.11.2007 23:41, Andrew Morton a écrit :
>>>>>>>>>> On Wed, 21 Nov 2007 22:45:22 +0100
>>>>>>>>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
>>>>>>>>>>
>>>>>>>>>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
>>>>>>>>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>>>>>>>>>>> Hello,
>>>>>>>>>>>
>>>>>>>>>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
>>>>>>>>>>> that a bunch of task are blocked in "D" state, they seem to wait for
>>>>>>>>>>> some I/O completion. I can try to hand-copy some data if requested.
>>>>>>>>>>>
>>>>>>>>>>> I found these messages in dmesg:
>>>>>>>>>>>
>>>>>>>>>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>>>>>> end_request: I/O error, dev sda, sector 16460
>>>>>>>>>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>>>>>>>>>>> ReiserFS: sda7: using ordered data mode
>>>>>>>>>>> --
>>>>>>>>>>> ReiserFS: sda7: Using r5 hash to sort names
>>>>>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>>>>>> end_request: I/O error, dev sdb, sector 19632
>>>>>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>>>>>> end_request: I/O error, dev sdb, sector 40037363
>>>>>>>>>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
>>>>>>>>>>> lp0: using parport0 (interrupt-driven).
>>>>>>>>>>>
>>>>>>>>>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
>>>>>>>>>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
>>>>>>>>>>>
>>>>>>>>>>> Maybe something is broken in pata_via driver ?
>>>>>>>>>>>
>>>>>>>>>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
>>>>>>>>>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
>>>>>>>>>> touch pata_via.c.
>>>>>>>>> None of the above...
>>>>>>>>>
>>>>>>>>> I did a bisection, it spotted git-scsi-misc.patch.
>>>>>>>>> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
>>>>>>>>>
>>>>>>>>> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
>>>>>>>>> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
>>>>>>>>> commits are touching documentation or drivers I don't use. I'll try
>>>>>>>>> to revert only this one this evening.
>>>>>> I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
>>>>>> does fix the problem.
>>>>>>
>>>>>>>> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
>>>>>>>> I shouldn't. Checking ...
>>>>>>>>
>>>>>>> Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
>>>>>>> when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
>>>>>> Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
>>>>> I think the problem is the way we treat BLOCKED and QUIESCED (the latter
>>>>> is the state that the domain validation uses and which we cannot kill
>>>>> fastfail on). It's definitely wrong to kill fastfail requests when the
>>>>> state is QUIESCE.
>>>>>
>>>>> This patch (which is applied on top of Hannes original) separates the
>>>>> BLOCK and QUIESCE states correctly ... does this fix the problem?
>>>> No, it doesn't help... (2.6.24-rc3-mm1 + your patch still has problems)
>>> OK, could you post dmesgs again, please. I actually tested this with an
>>> aic79xx card, and for me it does cause Domain Validation to succeed
>>> again.
>>>
>> Are the patches indeed to fix that problem as well ?
>>
>> http://lkml.org/lkml/2007/11/23/5
>
> That dmesg is from an unknown SCSI card exhibiting Domain Validation
> problems, so it's a reasonable probability, yes ... but you'll need the
> additional hack I just did to prevent further intermittent failures.
My controller is:
03:0e.0 SCSI storage controller [0100]: Adaptec AIC-7892P U160/m [9005:008f] (rev 02)
I'll try the patches in a bit.
>
> James
>
Gabriel
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-24 18:08 ` Gabriel C
@ 2007-11-24 18:28 ` Gabriel C
0 siblings, 0 replies; 128+ messages in thread
From: Gabriel C @ 2007-11-24 18:28 UTC (permalink / raw)
To: James Bottomley
Cc: Laurent Riffard, Hannes Reinecke, Andrew Morton, linux-kernel,
linux-ide, linux-scsi
Gabriel C wrote:
> James Bottomley wrote:
>> On Sat, 2007-11-24 at 18:54 +0100, Gabriel C wrote:
>>> James Bottomley wrote:
>>>> On Sat, 2007-11-24 at 13:57 +0100, Laurent Riffard wrote:
>>>>> Le 24.11.2007 07:42, James Bottomley a écrit :
>>>>>> On Fri, 2007-11-23 at 18:52 +0100, Laurent Riffard wrote:
>>>>>>> Le 23.11.2007 12:38, Hannes Reinecke a écrit :
>>>>>>>> Hannes Reinecke wrote:
>>>>>>>>> Laurent Riffard wrote:
>>>>>>>>>> Le 21.11.2007 23:41, Andrew Morton a écrit :
>>>>>>>>>>> On Wed, 21 Nov 2007 22:45:22 +0100
>>>>>>>>>>> Laurent Riffard <laurent.riffard@free.fr> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Le 21.11.2007 05:45, Andrew Morton a écrit :
>>>>>>>>>>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>>>>>>>>>>>> Hello,
>>>>>>>>>>>>
>>>>>>>>>>>> My system hangs shortly after I logged in Gnome desktop. SysRq-W shows
>>>>>>>>>>>> that a bunch of task are blocked in "D" state, they seem to wait for
>>>>>>>>>>>> some I/O completion. I can try to hand-copy some data if requested.
>>>>>>>>>>>>
>>>>>>>>>>>> I found these messages in dmesg:
>>>>>>>>>>>>
>>>>>>>>>>>> ~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
>>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>>> sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>>>>>>> end_request: I/O error, dev sda, sector 16460
>>>>>>>>>>>> ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>>>>>>>>>>>> ReiserFS: sda7: using ordered data mode
>>>>>>>>>>>> --
>>>>>>>>>>>> ReiserFS: sda7: Using r5 hash to sort names
>>>>>>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>>>>>>> end_request: I/O error, dev sdb, sector 19632
>>>>>>>>>>>> sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>>>>>>>>>>> end_request: I/O error, dev sdb, sector 40037363
>>>>>>>>>>>> Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
>>>>>>>>>>>> lp0: using parport0 (interrupt-driven).
>>>>>>>>>>>>
>>>>>>>>>>>> These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible.
>>>>>>>>>>>> 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.
>>>>>>>>>>>>
>>>>>>>>>>>> Maybe something is broken in pata_via driver ?
>>>>>>>>>>>>
>>>>>>>>>>> Could be - libata-reimplement-ata_acpi_cbl_80wire-using-ata_acpi_gtm_xfermask.patch
>>>>>>>>>>> and pata_amd-pata_via-de-couple-programming-of-pio-mwdma-and-udma-timings.patch
>>>>>>>>>>> touch pata_via.c.
>>>>>>>>>> None of the above...
>>>>>>>>>>
>>>>>>>>>> I did a bisection, it spotted git-scsi-misc.patch.
>>>>>>>>>> I just run 2.6.24-rc3-mm1 + revert-git-scsi-misc.patch, and it works fine.
>>>>>>>>>>
>>>>>>>>>> I guess commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0 "[SCSI] Do not
>>>>>>>>>> requeue requests if REQ_FAILFAST is set" is the real culprit. The other
>>>>>>>>>> commits are touching documentation or drivers I don't use. I'll try
>>>>>>>>>> to revert only this one this evening.
>>>>>>> I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
>>>>>>> does fix the problem.
>>>>>>>
>>>>>>>>> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
>>>>>>>>> I shouldn't. Checking ...
>>>>>>>>>
>>>>>>>> Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
>>>>>>>> when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
>>>>>>> Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
>>>>>> I think the problem is the way we treat BLOCKED and QUIESCED (the latter
>>>>>> is the state that the domain validation uses and which we cannot kill
>>>>>> fastfail on). It's definitely wrong to kill fastfail requests when the
>>>>>> state is QUIESCE.
>>>>>>
>>>>>> This patch (which is applied on top of Hannes original) separates the
>>>>>> BLOCK and QUIESCE states correctly ... does this fix the problem?
>>>>> No, it doesn't help... (2.6.24-rc3-mm1 + your patch still has problems)
>>>> OK, could you post dmesgs again, please. I actually tested this with an
>>>> aic79xx card, and for me it does cause Domain Validation to succeed
>>>> again.
>>>>
>>> Are the patches indeed to fix that problem as well ?
>>>
>>> http://lkml.org/lkml/2007/11/23/5
>> That dmesg is from an unknown SCSI card exhibiting Domain Validation
>> problems, so it's a reasonable probability, yes ... but you'll need the
>> additional hack I just did to prevent further intermittent failures.
>
> My controller is:
>
> 03:0e.0 SCSI storage controller [0100]: Adaptec AIC-7892P U160/m [9005:008f] (rev 02)
>
> I'll try the patches in a bit.
With your patches my problem(s) are solved. Domain Validation works again.
...
[ 32.179521] scsi 0:0:0:0: Direct-Access SEAGATE ST318406LW 0109 PQ: 0 ANSI: 3
[ 32.179540] scsi0:A:0:0: Tagged Queuing enabled. Depth 32
[ 32.179554] target0:0:0: Beginning Domain Validation
[ 32.188553] target0:0:0: wide asynchronous
[ 32.195302] target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 32.206510] target0:0:0: Ending Domain Validation
[ 32.211699] scsi 0:0:1:0: Direct-Access FUJITSU MAH3182MP 0114 PQ: 0 ANSI: 4
[ 32.211707] scsi0:A:1:0: Tagged Queuing enabled. Depth 32
[ 32.211717] target0:0:1: Beginning Domain Validation
[ 32.213980] target0:0:1: wide asynchronous
[ 32.215682] target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[ 32.220205] target0:0:1: Ending Domain Validation
...
Thx James :)
Gabriel
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-24 13:26 ` James Bottomley
2007-11-24 17:54 ` Gabriel C
@ 2007-11-24 22:59 ` Laurent Riffard
2007-11-25 7:37 ` James Bottomley
1 sibling, 1 reply; 128+ messages in thread
From: Laurent Riffard @ 2007-11-24 22:59 UTC (permalink / raw)
To: James Bottomley
Cc: Hannes Reinecke, Andrew Morton, linux-kernel, linux-ide, linux-scsi
[-- Attachment #1: Type: text/plain, Size: 2041 bytes --]
Le 24.11.2007 14:26, James Bottomley a écrit :
> On Sat, 2007-11-24 at 13:57 +0100, Laurent Riffard wrote:
>> Le 24.11.2007 07:42, James Bottomley a écrit :
>>> On Fri, 2007-11-23 at 18:52 +0100, Laurent Riffard wrote:
>>>> Le 23.11.2007 12:38, Hannes Reinecke a écrit :
[snip]
>>>> I can confirm : reverting commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
>>>> does fix the problem.
>>>>
>>>>>> Hmm. Weird. I'll have a look into it. Apparently I'll be returning an error where
>>>>>> I shouldn't. Checking ...
>>>>>>
>>>>> Ok, found it. We are blocking even special commands (ie requests with PREEMPT not set)
>>>>> when FAILFAST is set. Which is clearly wrong. The attached patch fixes this.
>>>> Sorry, it's not enough. 2.6.24-rc3-mm1 + your patch still hangs with I/O errors.
>>> I think the problem is the way we treat BLOCKED and QUIESCED (the latter
>>> is the state that the domain validation uses and which we cannot kill
>>> fastfail on). It's definitely wrong to kill fastfail requests when the
>>> state is QUIESCE.
>>>
>>> This patch (which is applied on top of Hannes original) separates the
>>> BLOCK and QUIESCE states correctly ... does this fix the problem?
>>
>> No, it doesn't help... (2.6.24-rc3-mm1 + your patch still has problems)
>
> OK, could you post dmesgs again, please. I actually tested this with an
> aic79xx card, and for me it does cause Domain Validation to succeed
> again.
James,
Here is a dmesg produced by 2.6.24-rc3-mm1 + your patch "separates the
BLOCK and QUIESCE states correctly" (http://lkml.org/lkml/2007/11/24/8).
How to reproduce :
- boot
- switch to a text console
- capture dmesg in a file, sync, etc. There are 3 I/O errors, but the
system does work.
- switch to X console, log in the Gnome Desktop, the system partially
hangs.
- switch back to a text console: dmesg(1) still works, it shows some
additonal I/O errors. At this point, any disk access makes the system
completely hung.
Additionnal data:
- the I/O errors always happen on the same blocks.
--
laurent
[-- Attachment #2: dmesg-2.6.24-rc3-mm1-patched --]
[-- Type: text/plain, Size: 30536 bytes --]
[ 0.000000] Linux version 2.6.24-rc3-mm1 (laurent@calimero) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #122 PREEMPT Fri Nov 23 18:47:58 CET 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
[ 0.000000] BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
[ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131052) 0 entries of 256 used
[ 0.000000] sizeof(struct page) = 32
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131052
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131052
[ 0.000000] On node 0 totalpages: 131052
[ 0.000000] Node 0 memmap at 0xC1000000 size 4194304 first pfn 0xC1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125965 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F6A80, 0014 (r0 ASUS )
[ 0.000000] ACPI: RSDT 1FFEC000, 002C (r1 ASUS A7V133-C 30303031 MSFT 31313031)
[ 0.000000] ACPI: FACP 1FFEC080, 0074 (r1 ASUS A7V133-C 30303031 MSFT 31313031)
[ 0.000000] ACPI: DSDT 1FFEC100, 2CE1 (r1 ASUS A7V133-C 1000 MSFT 100000B)
[ 0.000000] ACPI: FACS 1FFFF000, 0040
[ 0.000000] ACPI: BOOT 1FFEC040, 0028 (r1 ASUS A7V133-C 30303031 MSFT 31313031)
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130029
[ 0.000000] Kernel command line: root=/dev/mapper/vglinux1-lv_ubuntu2 ro locale=fr_FR video=radeonfb:1280x1024@60 resume=/dev/mapper/vglinux1-lvswap
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (01406000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=C03C2000 soft=C03C1000
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1410.216 MHz processor.
[ 22.884407] Console: colour VGA+ 80x25
[ 22.884416] console [tty0] enabled
[ 22.886762] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 22.886826] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 22.886874] ... MAX_LOCK_DEPTH: 30
[ 22.886923] ... MAX_LOCKDEP_KEYS: 2048
[ 22.886971] ... CLASSHASH_SIZE: 1024
[ 22.887020] ... MAX_LOCKDEP_ENTRIES: 8192
[ 22.887067] ... MAX_LOCKDEP_CHAINS: 16384
[ 22.887115] ... CHAINHASH_SIZE: 8192
[ 22.887164] memory used by lock dependency info: 992 kB
[ 22.887214] per task-struct memory footprint: 1200 bytes
[ 22.887265] ------------------------
[ 22.887312] | Locking API testsuite:
[ 22.887358] ----------------------------------------------------------------------------
[ 22.887422] | spin |wlock |rlock |mutex | wsem | rsem |
[ 22.887484] --------------------------------------------------------------------------
[ 22.887557] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 22.889187] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 22.890642] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 22.892120] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 22.893598] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 22.895101] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 22.896609] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 22.898121] double unlock: ok | ok | ok | ok | ok | ok |
[ 22.899557] initialize held: ok | ok | ok | ok | ok | ok |
[ 22.900996] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 22.902460] --------------------------------------------------------------------------
[ 22.902523] recursive read-lock: | ok | | ok |
[ 22.903128] recursive read-lock #2: | ok | | ok |
[ 22.903732] mixed read-write-lock: | ok | | ok |
[ 22.904337] mixed write-read-lock: | ok | | ok |
[ 22.904945] --------------------------------------------------------------------------
[ 22.905009] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 22.905772] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 22.906532] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 22.907291] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 22.908049] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 22.908809] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 22.909568] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 22.910327] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 22.911086] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 22.911846] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 22.912605] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 22.913377] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 22.914148] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 22.914916] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 22.915686] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 22.916456] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 22.917227] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 22.917996] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 22.918766] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 22.919526] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 22.920290] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 22.921059] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 22.921827] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 22.922597] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 22.923368] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 22.924137] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 22.924907] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 22.925675] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 22.926446] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 22.927214] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 22.927984] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 22.928754] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 22.929525] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 22.930295] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 22.931066] hard-irq lock-inversion/123: ok | ok | ok |
[ 22.931839] soft-irq lock-inversion/123: ok | ok | ok |
[ 22.932615] hard-irq lock-inversion/132: ok | ok | ok |
[ 22.933389] soft-irq lock-inversion/132: ok | ok | ok |
[ 22.934162] hard-irq lock-inversion/213: ok | ok | ok |
[ 22.934934] soft-irq lock-inversion/213: ok | ok | ok |
[ 22.935709] hard-irq lock-inversion/231: ok | ok | ok |
[ 22.936479] soft-irq lock-inversion/231: ok | ok | ok |
[ 22.937251] hard-irq lock-inversion/312: ok | ok | ok |
[ 22.938021] soft-irq lock-inversion/312: ok | ok | ok |
[ 22.938796] hard-irq lock-inversion/321: ok | ok | ok |
[ 22.939568] soft-irq lock-inversion/321: ok | ok | ok |
[ 22.940341] hard-irq read-recursion/123: ok |
[ 22.940652] soft-irq read-recursion/123: ok |
[ 22.940963] hard-irq read-recursion/132: ok |
[ 22.941274] soft-irq read-recursion/132: ok |
[ 22.941587] hard-irq read-recursion/213: ok |
[ 22.941897] soft-irq read-recursion/213: ok |
[ 22.942208] hard-irq read-recursion/231: ok |
[ 22.942518] soft-irq read-recursion/231: ok |
[ 22.942829] hard-irq read-recursion/312: ok |
[ 22.943139] soft-irq read-recursion/312: ok |
[ 22.943450] hard-irq read-recursion/321: ok |
[ 22.943759] soft-irq read-recursion/321: ok |
[ 22.944071] -------------------------------------------------------
[ 22.944126] Good, all 218 testcases passed! |
[ 22.944174] ---------------------------------
[ 22.944870] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 22.945989] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 22.969934] Memory: 510792k/524208k available (1734k kernel code, 12768k reserved, 883k data, 184k init, 0k highmem)
[ 22.970014] virtual kernel memory layout:
[ 22.970016] fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB)
[ 22.970019] vmalloc : 0xe0800000 - 0xfffb3000 ( 503 MB)
[ 22.970021] lowmem : 0xc0000000 - 0xdffec000 ( 511 MB)
[ 22.970023] .init : 0xc0390000 - 0xc03be000 ( 184 kB)
[ 22.970025] .data : 0xc02b18bc - 0xc038e504 ( 883 kB)
[ 22.970027] .text : 0xc0100000 - 0xc02b18bc (1734 kB)
[ 22.970368] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 23.051065] Calibrating delay using timer specific routine.. 2824.37 BogoMIPS (lpj=5648753)
[ 23.051383] Mount-cache hash table entries: 512
[ 23.052131] CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 23.052147] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 23.052205] CPU: L2 Cache: 256K (64 bytes/line)
[ 23.052255] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 00000000
[ 23.052267] Intel machine check architecture supported.
[ 23.052319] Intel machine check reporting enabled on CPU#0.
[ 23.052376] Compat vDSO mapped to ffffe000.
[ 23.052441] CPU: AMD Athlon(TM) XP 1600+ stepping 02
[ 23.052557] Checking 'hlt' instruction... OK.
[ 23.067300] Freeing SMP alternatives: 0k freed
[ 23.067349] ACPI: Core revision 20070126
[ 23.072552] Parsing all Control Methods:
[ 23.072681] Table [DSDT](id 0001) - 356 Objects with 38 Devices 115 Methods 24 Regions
[ 23.072782] tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
[ 23.072914] ACPI: setting ELCR to 0200 (from 0820)
[ 23.073065] evxfevnt-0091 [00] enable : Transition to ACPI mode successful
[ 23.074112] khelper used greatest stack depth: 3172 bytes left
[ 23.074581] net_namespace: 76 bytes
[ 23.075809] NET: Registered protocol family 16
[ 23.077047] ACPI: bus type pci registered
[ 23.079899] PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
[ 23.080300] PCI: Using configuration type 1
[ 23.080349] Setting up standard PCI resources
[ 23.089819] khelper used greatest stack depth: 3064 bytes left
[ 23.094177] evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
[ 23.096633] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
[ 23.096774] ACPI: EC: Look up EC in DSDT
[ 23.100425] Completing Region/Field/Buffer/Package initialization:................................................
[ 23.107399] Initialized 16/24 Regions 2/2 Fields 19/19 Buffers 11/14 Packages (365 nodes)
[ 23.107501] Initializing Device/Processor/Thermal objects by executing _INI methods:
[ 23.107592] Executed 0 _INI methods requiring 0 _STA executions (examined 41 objects)
[ 23.107780] ACPI: Interpreter enabled
[ 23.107830] ACPI: (supports S0 S1 S3 S4 S5)
[ 23.108118] ACPI: Using PIC for interrupt routing
[ 23.134108] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.135036] PCI quirk: region e200-e27f claimed by vt82c686 HW-mon
[ 23.135123] PCI quirk: region e800-e80f claimed by vt82c686 SMB
[ 23.135717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.287800] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 23.288493] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.289235] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 23.290017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 23.290844] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.291166] pnp: PnP ACPI init
[ 23.291262] ACPI: bus type pnp registered
[ 23.300586] pnp: PnP ACPI: found 14 devices
[ 23.300648] ACPI: ACPI bus type pnp unregistered
[ 23.302100] PCI: Using ACPI for IRQ routing
[ 23.302153] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 23.327027] Time: tsc clocksource has been installed.
[ 23.335311] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 23.335371] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 23.335430] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[ 23.335496] system 00:00: iomem range 0xfffe0000-0xffffffff could not be reserved
[ 23.335579] system 00:02: ioport range 0x3f0-0x3f1 has been reserved
[ 23.335636] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 23.335708] system 00:03: ioport range 0xe400-0xe47f has been reserved
[ 23.335765] system 00:03: ioport range 0xe800-0xe80f has been reserved
[ 23.368445] PCI: Bridge: 0000:00:01.0
[ 23.368500] IO window: d000-dfff
[ 23.368551] MEM window: b7000000-b7ffffff
[ 23.368602] PREFETCH window: b8000000-cfffffff
[ 23.368677] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 23.368757] NET: Registered protocol family 2
[ 23.403206] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 23.404092] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 23.404621] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 23.406957] TCP: Hash tables configured (established 16384 bind 16384)
[ 23.407128] TCP reno registered
[ 23.420600] checking if image is initramfs... it is
[ 23.870982] Switched to NOHz mode on CPU #0
[ 23.918866] Freeing initrd memory: 3197k freed
[ 23.919595] Simple Boot Flag at 0x3a set to 0x1
[ 23.923543] io scheduler noop registered
[ 23.923604] io scheduler anticipatory registered
[ 23.923654] io scheduler deadline registered
[ 23.923727] io scheduler cfq registered (default)
[ 23.923792] Applying VIA southbridge workaround.
[ 23.923845] PCI: VIA PCI bridge detected. Disabling DAC.
[ 23.923898] PCI: Disabling Via external APIC routing
[ 23.923989] Boot video device is 0000:01:00.0
[ 23.925776] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 23.925837] PCI: setting IRQ 11 as level-triggered
[ 23.925844] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 23.926143] radeonfb: Found Intel x86 BIOS ROM Image
[ 23.926200] radeonfb: Retrieved PLL infos from BIOS
[ 23.926252] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=166.00 MHz
[ 23.926317] radeonfb: PLL min 20000 max 40000
[ 24.006702] i2c-adapter i2c-1: unable to read EDID block.
[ 24.130631] i2c-adapter i2c-1: unable to read EDID block.
[ 24.254602] i2c-adapter i2c-1: unable to read EDID block.
[ 24.378592] i2c-adapter i2c-3: unable to read EDID block.
[ 24.502559] i2c-adapter i2c-3: unable to read EDID block.
[ 24.626531] i2c-adapter i2c-3: unable to read EDID block.
[ 24.890696] radeonfb: Monitor 1 type CRT found
[ 24.890763] radeonfb: EDID probed
[ 24.890810] radeonfb: Monitor 2 type no found
[ 24.939657] Console: switching to colour frame buffer device 160x64
[ 24.978303] radeonfb (0000:01:00.0): ATI Radeon Ya
[ 24.979794] input: Power Button (FF) as /class/input/input0
[ 24.979882] ACPI: Power Button (FF) [PWRF]
[ 24.980293] input: Power Button (CM) as /class/input/input1
[ 24.980367] ACPI: Power Button (CM) [PWRB]
[ 24.981341] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 24.981457] ACPI: Processor [CPU0] (supports 16 throttling states)
[ 25.015443] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 25.016038] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 25.016973] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 25.017057] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 25.018012] mice: PS/2 mouse device common for all mice
[ 25.029741] Marking TSC unstable due to: possible TSC halt in C2.
[ 25.030719] Time: acpi_pm clocksource has been installed.
[ 25.039605] input: AT Translated Set 2 keyboard as /class/input/input2
[ 25.054670] TCP cubic registered
[ 25.054759] NET: Registered protocol family 1
[ 25.054863] Using IPI Shortcut mode
[ 25.056562] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 25.058363] Freeing unused kernel memory: 184k freed
[ 25.058540] Write protecting the kernel text: 1736k
[ 25.058606] Write protecting the kernel read-only data: 700k
[ 25.061832] busybox used greatest stack depth: 2900 bytes left
[ 25.072401] exe used greatest stack depth: 2864 bytes left
[ 25.175794] exe used greatest stack depth: 2652 bytes left
[ 25.240831] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[ 25.261513] consolechars used greatest stack depth: 2556 bytes left
[ 25.483644] device-mapper: uevent: version 1.0.3
[ 25.484060] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 25.506481] SCSI subsystem initialized
[ 25.517545] libata version 3.00 loaded.
[ 25.520583] pata_via 0000:00:04.1: version 0.3.3
[ 25.521256] scsi0 : pata_via
[ 25.521711] scsi1 : pata_via
[ 25.524089] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 25.524176] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 25.683141] ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
[ 25.683208] ata1.00: 78165360 sectors, multi 16: LBA
[ 25.683475] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 25.684116] ata1.01: 160086528 sectors, multi 16: LBA
[ 25.691127] ata1.00: configured for UDMA/100
[ 25.699142] ata1.01: configured for UDMA/100
[ 26.170860] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33
[ 26.171562] ata2.01: ATAPI: CD-950E/AKU, A4Q, max MWDMA2, CDB intr
[ 26.330839] ata2.00: configured for UDMA/33
[ 26.490828] ata2.01: configured for MWDMA2
[ 26.503014] scsi 0:0:0:0: Direct-Access ATA ST340016A 3.75 PQ: 0 ANSI: 5
[ 26.504670] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 26.509842] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5
[ 26.511673] scsi 1:0:1:0: CD-ROM E-IDE CD-950E/AKU A4Q PQ: 0 ANSI: 5
[ 26.513278] modprobe used greatest stack depth: 2152 bytes left
[ 26.527262] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 26.528154] sd 0:0:0:0: [sda] Write Protect is off
[ 26.528961] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.529033] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.530146] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 26.531224] sd 0:0:0:0: [sda] Write Protect is off
[ 26.532082] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.532151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.533090] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 26.581919] sd 0:0:0:0: [sda] Attached SCSI disk
[ 26.583274] sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
[ 26.584268] sd 0:0:1:0: [sdb] Write Protect is off
[ 26.585211] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 26.585282] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.586508] sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
[ 26.587530] sd 0:0:1:0: [sdb] Write Protect is off
[ 26.588492] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 26.588564] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.589603] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
[ 26.639851] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 26.641160] modprobe used greatest stack depth: 1964 bytes left
[ 29.780014] Attempting manual resume
[ 29.844555] ReiserFS: dm-10: found reiserfs format "3.6" with standard journal
[ 29.845623] ReiserFS: dm-10: using ordered data mode
[ 29.876338] ReiserFS: dm-10: journal params: device dm-10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 29.881733] ReiserFS: dm-10: checking transaction log (dm-10)
[ 29.994198] ReiserFS: dm-10: Using r5 hash to sort names
[ 29.995523] exe used greatest stack depth: 1620 bytes left
[ 41.338877] Linux agpgart interface v0.102
[ 41.365338] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 41.455791] agpgart: AGP aperture is 256M @ 0xd0000000
[ 41.639237] parport_pc: VIA 686A/8231 detected
[ 41.639244] parport_pc: probing current configuration
[ 41.639266] parport_pc: Current parallel port base: 0x378
[ 41.639446] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 41.736002] parport_pc: VIA parallel port: io=0x378, irq=7
[ 41.826262] usbcore: registered new interface driver usbfs
[ 41.827814] usbcore: registered new interface driver hub
[ 41.838329] usbcore: registered new device driver usb
[ 41.842033] via686a 0000:00:04.4: Forcing ISA address 0xe200
[ 41.843094] via686a 0000:00:04.4: Enabling sensors
[ 41.857018] ACPI: I/O resource vt596_smbus [0xe800-0xe807] conflicts with ACPI region SM00 [0xe800-0xe806]
[ 41.858112] ACPI: Device needs an ACPI driver
[ 41.859147] vt596_smbus: probe of 0000:00:04.4 failed with error -16
[ 41.874600] PCI: Enabling device 0000:00:09.0 (0014 -> 0016)
[ 41.876608] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 41.877642] PCI: setting IRQ 5 as level-triggered
[ 41.877649] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 41.892852] input: PC Speaker as /class/input/input4
[ 41.941506] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[ 41.958451] USB Universal Host Controller Interface driver v3.0
[ 42.017891] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 42.032784] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 42.034064] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 42.035203] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 42.104236] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 42.105276] Uniform CD-ROM driver Revision: 3.20
[ 42.123106] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 42.135665] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[ 42.145075] Real Time Clock Driver v1.12ac
[ 42.155668] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 42.277609] Floppy drive(s): fd0 is 1.44M
[ 42.299599] FDC 0 is a post-1991 82077
[ 42.336396] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[b6800000-b68007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 42.376753] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 42.392166] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 42.419779] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 42.467724] PCI: Enabling device 0000:00:0b.0 (0000 -> 0001)
[ 42.470235] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 42.471237] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 42.474128] eth0: RealTek RTL-8029 found at 0x9400, IRQ 11, 00:40:95:46:6e:2d.
[ 42.475610] ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 42.476711] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 42.478965] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 42.480365] uhci_hcd 0000:00:04.2: irq 5, io base 0x0000b400
[ 42.482290] usb usb1: configuration #1 chosen from 1 choice
[ 42.483685] hub 1-0:1.0: USB hub found
[ 42.484993] hub 1-0:1.0: 2 ports detected
[ 42.552689] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 42.554316] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 42.588475] usb usb1: new device found, idVendor=0000, idProduct=0000
[ 42.589655] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 42.590616] usb usb1: Product: UHCI Host Controller
[ 42.592260] usb usb1: Manufacturer: Linux 2.6.24-rc3-mm1 uhci_hcd
[ 42.593218] usb usb1: SerialNumber: 0000:00:04.2
[ 42.594289] ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 42.595339] uhci_hcd 0000:00:04.3: UHCI Host Controller
[ 42.596598] uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
[ 42.597652] uhci_hcd 0000:00:04.3: irq 5, io base 0x0000b000
[ 42.599191] usb usb2: configuration #1 chosen from 1 choice
[ 42.600584] hub 2-0:1.0: USB hub found
[ 42.601596] hub 2-0:1.0: 2 ports detected
[ 42.704030] usb usb2: new device found, idVendor=0000, idProduct=0000
[ 42.705073] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 42.706080] usb usb2: Product: UHCI Host Controller
[ 42.707068] usb usb2: Manufacturer: Linux 2.6.24-rc3-mm1 uhci_hcd
[ 42.708509] usb usb2: SerialNumber: 0000:00:04.3
[ 42.811540] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 42.974026] usb 1-1: configuration #1 chosen from 1 choice
[ 42.978609] hub 1-1:1.0: USB hub found
[ 42.981379] hub 1-1:1.0: 4 ports detected
[ 43.099312] usb 1-1: new device found, idVendor=05e3, idProduct=0606
[ 43.100430] usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
[ 43.101457] usb 1-1: Product: USB2.0 Hub
[ 43.467102] PCI: Enabling device 0000:00:0d.0 (0004 -> 0005)
[ 43.470645] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 43.728051] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0120e085ca]
[ 59.341540] ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
[ 59.341569] ReiserFS: dm-0: using ordered data mode
[ 59.346608] ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 59.349822] ReiserFS: dm-0: checking transaction log (dm-0)
[ 59.404729] ReiserFS: dm-0: Using r5 hash to sort names
[ 59.614980] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 59.616355] modprobe used greatest stack depth: 1552 bytes left
[ 59.631731] reiser4: dm-5: found disk format 4.0.0.
[ 59.890236] reiser4: dm-4: found disk format 4.0.0.
[ 60.091592] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 60.091681] kjournald starting. Commit interval 5 seconds
[ 60.091911] EXT3 FS on sda5, internal journal
[ 60.091989] EXT3-fs: mounted filesystem with ordered data mode.
[ 60.216113] sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 60.216124] end_request: I/O error, dev sda, sector 16460
[ 60.245789] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[ 60.245829] ReiserFS: sda7: using ordered data mode
[ 60.251474] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 60.254845] ReiserFS: sda7: checking transaction log (sda7)
[ 60.297870] ReiserFS: sda7: Using r5 hash to sort names
[ 60.351096] sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 60.351107] end_request: I/O error, dev sdb, sector 19632
[ 60.392984] sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[ 60.392995] end_request: I/O error, dev sdb, sector 40037363
[ 60.611920] Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
[ 67.273626] lp0: using parport0 (interrupt-driven).
[ 67.991472] [drm] Initialized drm 1.1.0 20060810
[ 68.024210] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[ 69.882699] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 69.883411] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 69.883933] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 70.305388] [drm] Setting GART location based on new memory map
[ 70.305410] [drm] Loading R200 Microcode
[ 70.305452] [drm] writeback test succeeded in 1 usecs
[ 70.920327] warning: process `avahi-daemon' sets w/ old libcap
[ 70.927975] warning: process `avahi-daemon' sets w/ old libcap
[ 70.931271] warning: process `avahi-daemon' sets w/ old libcap
[ 70.945490] warning: process `avahi-daemon' sets w/ old libcap
[ 323.784537] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 323.784574] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 323.784636] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 323.784658] [drm] Loading R200 Microcode
[ 334.964720] dmesg used greatest stack depth: 1292 bytes left
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-24 22:59 ` Laurent Riffard
@ 2007-11-25 7:37 ` James Bottomley
2007-11-25 20:39 ` Laurent Riffard
0 siblings, 1 reply; 128+ messages in thread
From: James Bottomley @ 2007-11-25 7:37 UTC (permalink / raw)
To: Laurent Riffard
Cc: Hannes Reinecke, Andrew Morton, linux-kernel, linux-ide, linux-scsi
On Sat, 2007-11-24 at 23:59 +0100, Laurent Riffard wrote:
> Le 24.11.2007 14:26, James Bottomley a écrit :
> > OK, could you post dmesgs again, please. I actually tested this
> with an
> > aic79xx card, and for me it does cause Domain Validation to succeed
> > again.
>
> James,
>
> Here is a dmesg produced by 2.6.24-rc3-mm1 + your patch "separates
> the
> BLOCK and QUIESCE states
> correctly" (http://lkml.org/lkml/2007/11/24/8).
>
> How to reproduce :
> - boot
> - switch to a text console
> - capture dmesg in a file, sync, etc. There are 3 I/O errors, but the
> system does work.
> - switch to X console, log in the Gnome Desktop, the system partially
> hangs.
> - switch back to a text console: dmesg(1) still works, it shows some
> additonal I/O errors. At this point, any disk access makes the
> system
> completely hung.
>
> Additionnal data:
> - the I/O errors always happen on the same blocks.
>
> plain text document attachment (dmesg-2.6.24-rc3-mm1-patched)
[...]
> [ 25.521256] scsi0 : pata_via
> [ 25.521711] scsi1 : pata_via
> [ 25.524089] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma
> 0xb800 irq 14
> [ 25.524176] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma
> 0xb808 irq 15
> [ 25.683141] ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
> [ 25.683208] ata1.00: 78165360 sectors, multi 16: LBA
> [ 25.683475] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
> [ 25.684116] ata1.01: 160086528 sectors, multi 16: LBA
> [ 25.691127] ata1.00: configured for UDMA/100
> [ 25.699142] ata1.01: configured for UDMA/100
> [ 26.170860] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max
> UDMA/33
> [ 26.171562] ata2.01: ATAPI: CD-950E/AKU, A4Q, max MWDMA2, CDB intr
> [ 26.330839] ata2.00: configured for UDMA/33
> [ 26.490828] ata2.01: configured for MWDMA2
> [ 26.503014] scsi 0:0:0:0: Direct-Access ATA ST340016A
> 3.75 PQ: 0 ANSI: 5
> [ 26.504670] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0
> YAR4 PQ: 0 ANSI: 5
> [ 26.509842] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM
> GSA-4165B DL05 PQ: 0 ANSI: 5
> [ 26.511673] scsi 1:0:1:0: CD-ROM E-IDE CD-950E/AKU
> A4Q PQ: 0 ANSI: 5
[...]
> [ 60.216113] sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT
> driverbyte=DRIVER_OK,SUGGEST_OK
> [ 60.216124] end_request: I/O error, dev sda, sector 16460
I think this one's quite easy: PATA devices in libata are queue depth 1
(since they don't do NCQ). Thus, they're peculiarly sensitive to the
bug where we fail over queue depth requests.
On the other hand, I don't see how a filesystem request is getting
REQ_FAILFAST ... unless there's a bio or readahead issue involved.
Anyway, could you try this patch:
http://marc.info/?l=linux-scsi&m=119592627425498
Which should fix the queue depth issue, and see if the errors go away?
Thanks,
James
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-25 7:37 ` James Bottomley
@ 2007-11-25 20:39 ` Laurent Riffard
2007-11-28 21:38 ` Laurent Riffard
0 siblings, 1 reply; 128+ messages in thread
From: Laurent Riffard @ 2007-11-25 20:39 UTC (permalink / raw)
To: James Bottomley
Cc: Hannes Reinecke, Andrew Morton, linux-kernel, linux-ide, linux-scsi
Le 25.11.2007 08:37, James Bottomley a écrit :
> On Sat, 2007-11-24 at 23:59 +0100, Laurent Riffard wrote:
>> Le 24.11.2007 14:26, James Bottomley a écrit :
>>> OK, could you post dmesgs again, please. I actually tested this
>> with an
>>> aic79xx card, and for me it does cause Domain Validation to succeed
>>> again.
>> James,
>>
>> Here is a dmesg produced by 2.6.24-rc3-mm1 + your patch "separates
>> the
>> BLOCK and QUIESCE states
>> correctly" (http://lkml.org/lkml/2007/11/24/8).
>>
>> How to reproduce :
>> - boot
>> - switch to a text console
>> - capture dmesg in a file, sync, etc. There are 3 I/O errors, but the
>> system does work.
>> - switch to X console, log in the Gnome Desktop, the system partially
>> hangs.
>> - switch back to a text console: dmesg(1) still works, it shows some
>> additonal I/O errors. At this point, any disk access makes the system
>> completely hung.
>>
>> Additionnal data:
>> - the I/O errors always happen on the same blocks.
>>
>> plain text document attachment (dmesg-2.6.24-rc3-mm1-patched)
> [...]
>> [ 25.521256] scsi0 : pata_via
>> [ 25.521711] scsi1 : pata_via
>> [ 25.524089] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
>> [ 25.524176] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
>> [ 25.683141] ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
>> [ 25.683208] ata1.00: 78165360 sectors, multi 16: LBA
>> [ 25.683475] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
>> [ 25.684116] ata1.01: 160086528 sectors, multi 16: LBA
>> [ 25.691127] ata1.00: configured for UDMA/100
>> [ 25.699142] ata1.01: configured for UDMA/100
>> [ 26.170860] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33
>> [ 26.171562] ata2.01: ATAPI: CD-950E/AKU, A4Q, max MWDMA2, CDB intr
>> [ 26.330839] ata2.00: configured for UDMA/33
>> [ 26.490828] ata2.01: configured for MWDMA2
>> [ 26.503014] scsi 0:0:0:0: Direct-Access ATA ST340016A 3.75 PQ: 0 ANSI: 5
>> [ 26.504670] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
>> [ 26.509842] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5
>> [ 26.511673] scsi 1:0:1:0: CD-ROM E-IDE CD-950E/AKU A4Q PQ: 0 ANSI: 5
> [...]
>> [ 60.216113] sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>> [ 60.216124] end_request: I/O error, dev sda, sector 16460
>
> I think this one's quite easy: PATA devices in libata are queue depth 1
> (since they don't do NCQ). Thus, they're peculiarly sensitive to the
> bug where we fail over queue depth requests.
>
> On the other hand, I don't see how a filesystem request is getting
> REQ_FAILFAST ... unless there's a bio or readahead issue involved.
> Anyway, could you try this patch:
>
> http://marc.info/?l=linux-scsi&m=119592627425498
>
> Which should fix the queue depth issue, and see if the errors go away?
No, this one doesn't help...
--
laurent
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 (sync is slow ?)
2007-11-24 18:04 ` Gabriel C
@ 2007-11-26 7:06 ` KAMEZAWA Hiroyuki
0 siblings, 0 replies; 128+ messages in thread
From: KAMEZAWA Hiroyuki @ 2007-11-26 7:06 UTC (permalink / raw)
To: Gabriel C; +Cc: kosaki, Andrew Morton, linux-kernel
On Sat, 24 Nov 2007 19:04:34 +0100
Gabriel C <nix.or.die@googlemail.com> wrote:
> >> It seems OK here from a quick test (i386, ext3-on-IDE).
> >>
> >> Maybe device driver/block breakage?
>
> Try revert
>
> http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=commitdiff_plain;h=8655a546c83fc43f0a73416bbd126d02de7ad6c0;hp=5bc717b6bdaaf52edf365eb7d9d8c89fec79df5d
>
> See also :
> http://lkml.org/lkml/2007/11/23/5
>
> and search for '2.6.24-rc3-mm1: I/O error, system hangs' on LKML
>
Thank you!
The problem was fixed by reverting the patch you pointed out.
-Kame
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-24 17:44 ` James Bottomley
@ 2007-11-26 7:54 ` Hannes Reinecke
0 siblings, 0 replies; 128+ messages in thread
From: Hannes Reinecke @ 2007-11-26 7:54 UTC (permalink / raw)
To: James Bottomley
Cc: Laurent Riffard, Andrew Morton, linux-kernel, linux-ide, linux-scsi
On Sat, Nov 24, 2007 at 07:44:13PM +0200, James Bottomley wrote:
> Probing intermittent failures in Domain Validation, even with the fixes
> applied leads me to the conclusion that there are further problems with
> this commit:
>
> commit fc5eb4facedbd6d7117905e775cee1975f894e79
> Author: Hannes Reinecke <hare@suse.de>
> Date: Tue Nov 6 09:23:40 2007 +0100
>
> [SCSI] Do not requeue requests if REQ_FAILFAST is set
>
> The essence of the problems is that you're causing REQ_FAILFAST to
> terminate commands with error on requeuing conditions, some of which are
> relatively common on most SCSI devices. While this may be the correct
> behaviour for multi-path, it's certainly wrong for the previously
> understood meaning of REQ_FAILFAST, which was don't retry on error,
> which is why domain validation and other applications use it to control
> error handling, but don't expect to get failures for a simple requeue
> are now spitting errors.
>
> I honestly can't see that, even for the multi-path case, returning an
> error when we're over queue depth is the correct thing to do (it may not
> matter to something like a symmetrix, but an array that has a non-zero
> cost associated with a path change, like a CPQ HSV or the AVT
> controllers, will show fairly large slow downs if you do this). Even if
> this is the desired behaviour (and I think that's a policy issue),
> DID_NO_CONNECT is almost certainly the wrong error to be sending back.
>
> This patch fixes up domain validation to work again correctly, however,
> I really think it's just a bandaid. Do you want to rethink the above
> commit?
>
Given the amounted error, yes, I'll have to.
But we still face the initial problem that requeued requests will be
stuck in the queue forever (ie until the timeout catches it), causing
failover to be painfully slow.
Anyway, I'll think it over.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N�rnberg
GF: Markus Rex, HRB 16746 (AG N�rnberg)
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 6:03 ` 2.6.24-rc3-mm1 Dave Young
2007-11-21 6:15 ` 2.6.24-rc3-mm1 Andrew Morton
@ 2007-11-26 18:48 ` Rik van Riel
2007-11-26 19:33 ` 2.6.24-rc3-mm1 Jiri Slaby
1 sibling, 1 reply; 128+ messages in thread
From: Rik van Riel @ 2007-11-26 18:48 UTC (permalink / raw)
To: Dave Young; +Cc: Andrew Morton, linux-kernel
On Wed, 21 Nov 2007 14:03:34 +0800
"Dave Young" <hidave.darkstar@gmail.com> wrote:
> On Nov 21, 2007 2:00 PM, Andrew Morton <akpm@linux-foundation.org> wrote:
> > On Wed, 21 Nov 2007 13:51:47 +0800 "Dave Young" <hidave.darkstar@gmail.com> wrote:
> >
> > > Hi, andrew
> > >
> > > modpost failed for me:
> > > MODPOST 360 modules
> > > ERROR: "empty_zero_page" [drivers/kvm/kvm.ko] undefined!
> > > make[1]: *** [__modpost] Error 1
> > > make: *** [modules] Error 2
> > >
> >
> > You're a victim of the hasty unexporting fad. Which architecture?
> > x86_64 I guess?
> ia32 instead.
FYI, x86_64 has the exact same issue.
----
KVM needs the empty_zero_page export reinstated.
Signed-off-by: Rik van Riel <riel@redhat.com>
diff -up linux-2.6.24-rc3-mm1/arch/x86/kernel/x8664_ksyms_64.c.export-empty-zero-page linux-2.6.24-rc3-mm1/arch/x86/kernel/x8664_ksyms_64.c
--- linux-2.6.24-rc3-mm1/arch/x86/kernel/x8664_ksyms_64.c.export-empty-zero-page 2007-11-26 13:47:53.000000000 -0500
+++ linux-2.6.24-rc3-mm1/arch/x86/kernel/x8664_ksyms_64.c 2007-11-26 13:41:32.000000000 -0500
@@ -33,6 +33,7 @@ EXPORT_SYMBOL(__copy_from_user_inatomic)
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(empty_zero_page);
/* Export string functions. We normally rely on gcc builtin for most of these,
but gcc sometimes decides not to inline them. */
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (10 preceding siblings ...)
2007-11-23 1:39 ` 2.6.24-rc3-mm1 Gabriel C
@ 2007-11-26 19:13 ` Randy Dunlap
2007-11-26 19:34 ` 2.6.24-rc3-mm1 Christoph Lameter
2007-11-27 7:16 ` 2.6.24-rc3-mm1 - brick my Dell Latitude D820 Valdis.Kletnieks
12 siblings, 1 reply; 128+ messages in thread
From: Randy Dunlap @ 2007-11-26 19:13 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tue, 20 Nov 2007 20:45:25 -0800 Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
allnoconfig on x86_64 gives:
arch/x86/mm/init_64.c:84: error: implicit declaration of function 'pfn_valid'
mm/page_alloc.c:2533: error: implicit declaration of function 'pfn_valid'
mm/vmstat.c:518: error: implicit declaration of function 'pfn_valid'
mm/memory.c:400: error: implicit declaration of function 'pfn_valid'
drivers/char/mem.c:312: error: implicit declaration of function 'pfn_valid'
---
~Randy
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-26 18:48 ` 2.6.24-rc3-mm1 Rik van Riel
@ 2007-11-26 19:33 ` Jiri Slaby
0 siblings, 0 replies; 128+ messages in thread
From: Jiri Slaby @ 2007-11-26 19:33 UTC (permalink / raw)
To: Rik van Riel; +Cc: Dave Young, Andrew Morton, linux-kernel
On 11/26/2007 07:48 PM, Rik van Riel wrote:
>>>> ERROR: "empty_zero_page" [drivers/kvm/kvm.ko] undefined!
[...]
> FYI, x86_64 has the exact same issue.
yes:
hot-fixes/git-x86-dont-unexport-empty_zero_page.patch
regards,
--
Jiri Slaby (jirislaby@gmail.com)
Faculty of Informatics, Masaryk University
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-26 19:13 ` 2.6.24-rc3-mm1 Randy Dunlap
@ 2007-11-26 19:34 ` Christoph Lameter
2007-11-26 20:40 ` 2.6.24-rc3-mm1 Randy Dunlap
2007-11-26 20:47 ` [PATCH -mm] x86 allnoconfig memory model Randy Dunlap
0 siblings, 2 replies; 128+ messages in thread
From: Christoph Lameter @ 2007-11-26 19:34 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Andrew Morton, linux-kernel
On Mon, 26 Nov 2007, Randy Dunlap wrote:
> On Tue, 20 Nov 2007 20:45:25 -0800 Andrew Morton wrote:
>
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>
> allnoconfig on x86_64 gives:
>
> arch/x86/mm/init_64.c:84: error: implicit declaration of function 'pfn_valid'
> mm/page_alloc.c:2533: error: implicit declaration of function 'pfn_valid'
> mm/vmstat.c:518: error: implicit declaration of function 'pfn_valid'
> mm/memory.c:400: error: implicit declaration of function 'pfn_valid'
> drivers/char/mem.c:312: error: implicit declaration of function 'pfn_valid'
Hmmm... CONFIG_SPARSEMEM is not set if you do allnoconfig
config SPARSEMEM
def_bool y
depends on SPARSEMEM_MANUAL
So I guess we need to set SPARSEMEM_MANUAL
But arch/x86/Kconfig has
config SPARSEMEM_MANUAL
bool "Sparse Memory"
depends on ARCH_SPARSEMEM_ENABLE
help
This will be the only option for some systems, including
memory hotplug systems. This is normal.
It needs to be not deselectable for x86_64.
Inserting
def_bool y if X86_64
did not help....
Somehow make menuconfig did not give me an ability to even enable this
again.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-21 6:18 ` Andrew Morton
` (2 preceding siblings ...)
2007-11-24 0:49 ` Alexey Dobriyan
@ 2007-11-26 19:39 ` Rik van Riel
2007-11-26 20:33 ` Andrew Morton
3 siblings, 1 reply; 128+ messages in thread
From: Rik van Riel @ 2007-11-26 19:39 UTC (permalink / raw)
To: Andrew Morton
Cc: Kamalesh Babulal, linux-kernel, Andy Whitcroft, Balbir Singh,
linux-acpi, Thomas Gleixner, Ingo Molnar
On Tue, 20 Nov 2007 22:18:39 -0800
Andrew Morton <akpm@linux-foundation.org> wrote:
> > ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> > Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
>
> ACPI or x86 breakage, I guess.
>
> Did 'noapic' work?
I got the same bug as above, 'noapic' gets past that point and right to the
next oops. I'm posting it here because this one is different from the others
in the thread, yet looks vaguely related:
Unable to handle kernel NULL pointer dereference at 0000000000000021 RIP:
[<ffffffff8108382a>] refresh_zone_stat_thresholds+0x6d/0x90
PGD 0
Oops: 0002 [1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #2
RIP: 0010:[<ffffffff8108382a>] [<ffffffff8108382a>] refresh_zone_stat_thresholds+0x6d/0x90
RSP: 0000:ffff81007fb59ec0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff8146fb38 RDI: 0000000000000001
RBP: ffff81000000c000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff81007fb59e60 R11: 0000000000000028 R12: ffffffff814d4558
R13: 0000000000000000 R14: ffffffff814b62c0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff813d9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000021 CR3: 0000000000201000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo FFFF81007FB58000, task FFFF81007FB56000)
Stack: 0000000000000000 0000000000000000 0000000000000000 ffffffff814a3839
0000000000000000 ffffffff8148e626 ffff81007fb56000 ffffffff8126d36a
0000000000000000 ffffffffffffffff ffffffff8105786b 0000000000000000
Call Trace:
[<ffffffff814a3839>] setup_vmstat+0x6/0x40
[<ffffffff8148e626>] kernel_init+0x169/0x2d8
[<ffffffff8126d36a>] trace_hardirqs_on_thunk+0x35/0x3a
[<ffffffff8105786b>] trace_hardirqs_on+0x115/0x138
[<ffffffff8100ce48>] child_rip+0xa/0x12
[<ffffffff8100c55f>] restore_args+0x0/0x30
[<ffffffff8148e4bd>] kernel_init+0x0/0x2d8
[<ffffffff8100ce3e>] child_rip+0x0/0x12
INFO: lockdep is turned off.
--
All Rights Reversed
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 19:39 ` Rik van Riel
@ 2007-11-26 20:33 ` Andrew Morton
2007-11-26 20:45 ` Ingo Molnar
` (2 more replies)
0 siblings, 3 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-26 20:33 UTC (permalink / raw)
To: Rik van Riel
Cc: kamalesh, linux-kernel, apw, balbir, linux-acpi, tglx, mingo,
Christoph Lameter
On Mon, 26 Nov 2007 14:39:43 -0500
Rik van Riel <riel@redhat.com> wrote:
> On Tue, 20 Nov 2007 22:18:39 -0800
> Andrew Morton <akpm@linux-foundation.org> wrote:
>
> > > ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> > > Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
> >
> > ACPI or x86 breakage, I guess.
> >
> > Did 'noapic' work?
>
> I got the same bug as above, 'noapic' gets past that point
We still don't know what caused this, afaik.
> and right to the
> next oops. I'm posting it here because this one is different from the others
> in the thread, yet looks vaguely related:
>
> Unable to handle kernel NULL pointer dereference at 0000000000000021 RIP:
> [<ffffffff8108382a>] refresh_zone_stat_thresholds+0x6d/0x90
> PGD 0
> Oops: 0002 [1] SMP
> last sysfs file:
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #2
> RIP: 0010:[<ffffffff8108382a>] [<ffffffff8108382a>] refresh_zone_stat_thresholds+0x6d/0x90
> RSP: 0000:ffff81007fb59ec0 EFLAGS: 00010293
> RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000001
> RDX: 0000000000000001 RSI: ffffffff8146fb38 RDI: 0000000000000001
> RBP: ffff81000000c000 R08: 0000000000000000 R09: 0000000000000000
> R10: ffff81007fb59e60 R11: 0000000000000028 R12: ffffffff814d4558
> R13: 0000000000000000 R14: ffffffff814b62c0 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffffffff813d9000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000021 CR3: 0000000000201000 CR4: 00000000000006a0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 1, threadinfo FFFF81007FB58000, task FFFF81007FB56000)
> Stack: 0000000000000000 0000000000000000 0000000000000000 ffffffff814a3839
> 0000000000000000 ffffffff8148e626 ffff81007fb56000 ffffffff8126d36a
> 0000000000000000 ffffffffffffffff ffffffff8105786b 0000000000000000
> Call Trace:
> [<ffffffff814a3839>] setup_vmstat+0x6/0x40
> [<ffffffff8148e626>] kernel_init+0x169/0x2d8
> [<ffffffff8126d36a>] trace_hardirqs_on_thunk+0x35/0x3a
> [<ffffffff8105786b>] trace_hardirqs_on+0x115/0x138
> [<ffffffff8100ce48>] child_rip+0xa/0x12
> [<ffffffff8100c55f>] restore_args+0x0/0x30
> [<ffffffff8148e4bd>] kernel_init+0x0/0x2d8
> [<ffffffff8100ce3e>] child_rip+0x0/0x12
>
> INFO: lockdep is turned off.
hm. This smells like a startup ordering problem, but everything which
refresh_zone_stat_thresholds() should be set up by the time we run
initcalls. Maybe the zone lists are bad?
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-26 19:34 ` 2.6.24-rc3-mm1 Christoph Lameter
@ 2007-11-26 20:40 ` Randy Dunlap
2007-11-26 20:56 ` 2.6.24-rc3-mm1 Christoph Lameter
2007-11-26 20:47 ` [PATCH -mm] x86 allnoconfig memory model Randy Dunlap
1 sibling, 1 reply; 128+ messages in thread
From: Randy Dunlap @ 2007-11-26 20:40 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Andrew Morton, linux-kernel
On Mon, 26 Nov 2007 11:34:15 -0800 (PST) Christoph Lameter wrote:
> On Mon, 26 Nov 2007, Randy Dunlap wrote:
>
> > On Tue, 20 Nov 2007 20:45:25 -0800 Andrew Morton wrote:
> >
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
> >
> > allnoconfig on x86_64 gives:
> >
> > arch/x86/mm/init_64.c:84: error: implicit declaration of function 'pfn_valid'
> > mm/page_alloc.c:2533: error: implicit declaration of function 'pfn_valid'
> > mm/vmstat.c:518: error: implicit declaration of function 'pfn_valid'
> > mm/memory.c:400: error: implicit declaration of function 'pfn_valid'
> > drivers/char/mem.c:312: error: implicit declaration of function 'pfn_valid'
>
> Hmmm... CONFIG_SPARSEMEM is not set if you do allnoconfig
>
> config SPARSEMEM
> def_bool y
> depends on SPARSEMEM_MANUAL
>
> So I guess we need to set SPARSEMEM_MANUAL
>
> But arch/x86/Kconfig has
>
> config SPARSEMEM_MANUAL
> bool "Sparse Memory"
> depends on ARCH_SPARSEMEM_ENABLE
> help
> This will be the only option for some systems, including
> memory hotplug systems. This is normal.
>
> It needs to be not deselectable for x86_64.
>
> Inserting
>
> def_bool y if X86_64
>
> did not help....
>
> Somehow make menuconfig did not give me an ability to even enable this
> again.
Thanks for the hint.
ARCH_SELECT_MEMORY_MODEL depends on X86_32. Is that too restrictive?
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on X86_32 && ARCH_SPARSEMEM_ENABLE
---
~Randy
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 20:33 ` Andrew Morton
@ 2007-11-26 20:45 ` Ingo Molnar
2007-11-26 22:08 ` Jiri Slaby
2007-11-26 20:54 ` Rik van Riel
2007-11-26 20:56 ` Christoph Lameter
2 siblings, 1 reply; 128+ messages in thread
From: Ingo Molnar @ 2007-11-26 20:45 UTC (permalink / raw)
To: Andrew Morton
Cc: Rik van Riel, kamalesh, linux-kernel, apw, balbir, linux-acpi,
tglx, Christoph Lameter
* Andrew Morton <akpm@linux-foundation.org> wrote:
> On Mon, 26 Nov 2007 14:39:43 -0500
> Rik van Riel <riel@redhat.com> wrote:
>
> > On Tue, 20 Nov 2007 22:18:39 -0800
> > Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > > > ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> > > > Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
> > >
> > > ACPI or x86 breakage, I guess.
> > >
> > > Did 'noapic' work?
> >
> > I got the same bug as above, 'noapic' gets past that point
>
> We still don't know what caused this, afaik.
yes. Is it a regression? If yes, could someone try to bisect it so that
we can fix it? If it's caused by x86.git then the 'mm' branch of the x86
git tree can be used for bisection:
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
it's supposed to build and boot fine at every bisection point. The
bisection run can be cut significantly by narrowing the bisection to the
arch/x86 changes only:
git-bisect start arch/x86 include/asm-x86/
(and if it finds a nonsensical commit, i.e. the breakage is not caused
by the x86 commits, save the "git-bisect log" output into a file,
restart the git bisection and use "git-bisect replay" to insert all the
test points into a fuller bisection run - this saves quite some time.)
Ingo
^ permalink raw reply [flat|nested] 128+ messages in thread
* [PATCH -mm] x86 allnoconfig memory model
2007-11-26 19:34 ` 2.6.24-rc3-mm1 Christoph Lameter
2007-11-26 20:40 ` 2.6.24-rc3-mm1 Randy Dunlap
@ 2007-11-26 20:47 ` Randy Dunlap
2007-11-26 21:00 ` Christoph Lameter
1 sibling, 1 reply; 128+ messages in thread
From: Randy Dunlap @ 2007-11-26 20:47 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Andrew Morton, linux-kernel
This patch allows allnoconfig to build cleanly.
---
From: Randy Dunlap <randy.dunlap@oracle.com>
Make allnoconfig on x86_64 build by allowing ARCH_SELECT_MEMORY_MODEL
to be enabled on X86 32/64, not just X86_32.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
arch/x86/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- linux-2.6.24-rc3-mm1.orig/arch/x86/Kconfig
+++ linux-2.6.24-rc3-mm1/arch/x86/Kconfig
@@ -937,7 +937,7 @@ config ARCH_SPARSEMEM_ENABLE
config ARCH_SELECT_MEMORY_MODEL
def_bool y
- depends on X86_32 && ARCH_SPARSEMEM_ENABLE
+ depends on ARCH_SPARSEMEM_ENABLE
config ARCH_MEMORY_PROBE
def_bool X86_64
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 20:33 ` Andrew Morton
2007-11-26 20:45 ` Ingo Molnar
@ 2007-11-26 20:54 ` Rik van Riel
2007-11-26 20:56 ` Christoph Lameter
2 siblings, 0 replies; 128+ messages in thread
From: Rik van Riel @ 2007-11-26 20:54 UTC (permalink / raw)
To: Andrew Morton
Cc: kamalesh, linux-kernel, apw, balbir, linux-acpi, tglx, mingo,
Christoph Lameter
On Mon, 26 Nov 2007 12:33:19 -0800
Andrew Morton <akpm@linux-foundation.org> wrote:
> > Unable to handle kernel NULL pointer dereference at 0000000000000021 RIP:
> > [<ffffffff8108382a>] refresh_zone_stat_thresholds+0x6d/0x90
> > PGD 0
> > Oops: 0002 [1] SMP
> > last sysfs file:
> > CPU 0
> > Modules linked in:
> > Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #2
> > RIP: 0010:[<ffffffff8108382a>] [<ffffffff8108382a>] refresh_zone_stat_thresholds+0x6d/0x90
> > RSP: 0000:ffff81007fb59ec0 EFLAGS: 00010293
> > RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000001
> > RDX: 0000000000000001 RSI: ffffffff8146fb38 RDI: 0000000000000001
> > RBP: ffff81000000c000 R08: 0000000000000000 R09: 0000000000000000
> > R10: ffff81007fb59e60 R11: 0000000000000028 R12: ffffffff814d4558
> > R13: 0000000000000000 R14: ffffffff814b62c0 R15: 0000000000000000
> > FS: 0000000000000000(0000) GS:ffffffff813d9000(0000) knlGS:0000000000000000
> > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> > CR2: 0000000000000021 CR3: 0000000000201000 CR4: 00000000000006a0
> > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > Process swapper (pid: 1, threadinfo FFFF81007FB58000, task FFFF81007FB56000)
> > Stack: 0000000000000000 0000000000000000 0000000000000000 ffffffff814a3839
> > 0000000000000000 ffffffff8148e626 ffff81007fb56000 ffffffff8126d36a
> > 0000000000000000 ffffffffffffffff ffffffff8105786b 0000000000000000
> > Call Trace:
> > [<ffffffff814a3839>] setup_vmstat+0x6/0x40
> > [<ffffffff8148e626>] kernel_init+0x169/0x2d8
> > [<ffffffff8126d36a>] trace_hardirqs_on_thunk+0x35/0x3a
> > [<ffffffff8105786b>] trace_hardirqs_on+0x115/0x138
> > [<ffffffff8100ce48>] child_rip+0xa/0x12
> > [<ffffffff8100c55f>] restore_args+0x0/0x30
> > [<ffffffff8148e4bd>] kernel_init+0x0/0x2d8
> > [<ffffffff8100ce3e>] child_rip+0x0/0x12
> >
> > INFO: lockdep is turned off.
>
> hm. This smells like a startup ordering problem, but everything which
> refresh_zone_stat_thresholds() should be set up by the time we run
> initcalls. Maybe the zone lists are bad?
Or the CPU array. Look at the oops Kamalesh got a few mails upthread...
I guess I'll have to start a bisect - can't port the VM code to a kernel
that doesn't boot...
--
All Rights Reversed
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 20:33 ` Andrew Morton
2007-11-26 20:45 ` Ingo Molnar
2007-11-26 20:54 ` Rik van Riel
@ 2007-11-26 20:56 ` Christoph Lameter
2 siblings, 0 replies; 128+ messages in thread
From: Christoph Lameter @ 2007-11-26 20:56 UTC (permalink / raw)
To: Andrew Morton
Cc: Rik van Riel, kamalesh, linux-kernel, apw, balbir, linux-acpi,
tglx, mingo
On Mon, 26 Nov 2007, Andrew Morton wrote:
> hm. This smells like a startup ordering problem, but everything which
> refresh_zone_stat_thresholds() should be set up by the time we run
> initcalls. Maybe the zone lists are bad?
refresh_zone_stat_thresholds goes through each zone and updates
the stat threshold for every per cpu structure in each zone.
So this could be a processor marked online where the pcp structures have
not been allocated or a zone NULL pointer.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-26 20:40 ` 2.6.24-rc3-mm1 Randy Dunlap
@ 2007-11-26 20:56 ` Christoph Lameter
0 siblings, 0 replies; 128+ messages in thread
From: Christoph Lameter @ 2007-11-26 20:56 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Andrew Morton, linux-kernel
On Mon, 26 Nov 2007, Randy Dunlap wrote:
> ARCH_SELECT_MEMORY_MODEL depends on X86_32. Is that too restrictive?
No. X86_64 only has one memory model.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH -mm] x86 allnoconfig memory model
2007-11-26 20:47 ` [PATCH -mm] x86 allnoconfig memory model Randy Dunlap
@ 2007-11-26 21:00 ` Christoph Lameter
2007-11-26 21:17 ` Randy Dunlap
2007-11-26 21:20 ` Andrew Morton
0 siblings, 2 replies; 128+ messages in thread
From: Christoph Lameter @ 2007-11-26 21:00 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Andrew Morton, linux-kernel
On Mon, 26 Nov 2007, Randy Dunlap wrote:
> This patch allows allnoconfig to build cleanly.
Well this sortof works.
One can again select a memory model but there is only one to choose from.
It would be best if the memory model selection would not occur.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH -mm] x86 allnoconfig memory model
2007-11-26 21:00 ` Christoph Lameter
@ 2007-11-26 21:17 ` Randy Dunlap
2007-11-26 21:20 ` Andrew Morton
1 sibling, 0 replies; 128+ messages in thread
From: Randy Dunlap @ 2007-11-26 21:17 UTC (permalink / raw)
To: Christoph Lameter; +Cc: Andrew Morton, linux-kernel
Christoph Lameter wrote:
> On Mon, 26 Nov 2007, Randy Dunlap wrote:
>
>> This patch allows allnoconfig to build cleanly.
>
> Well this sortof works.
>
> One can again select a memory model but there is only one to choose from.
At least the help text allows / explains that.
> It would be best if the memory model selection would not occur.
My attempt at that gave a warning from kconfig:
mm/Kconfig:70:warning: defaults for choice values not supported
Other than that, it seemed to work.
Maybe someone else can have a go at it.
--
~Randy
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH -mm] x86 allnoconfig memory model
2007-11-26 21:00 ` Christoph Lameter
2007-11-26 21:17 ` Randy Dunlap
@ 2007-11-26 21:20 ` Andrew Morton
2007-11-26 21:52 ` Christoph Lameter
1 sibling, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-26 21:20 UTC (permalink / raw)
To: Christoph Lameter; +Cc: randy.dunlap, linux-kernel
On Mon, 26 Nov 2007 13:00:03 -0800 (PST)
Christoph Lameter <clameter@sgi.com> wrote:
> On Mon, 26 Nov 2007, Randy Dunlap wrote:
>
> > This patch allows allnoconfig to build cleanly.
>
> Well this sortof works.
>
> One can again select a memory model but there is only one to choose from.
> It would be best if the memory model selection would not occur.
Unfortunately I just dropped that patch because git-x86 has gone and
combined include/asm-x86/sparsemem_32.h and include/asm-x86/sparsemem_64.h
into the same file.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH -mm] x86 allnoconfig memory model
2007-11-26 21:20 ` Andrew Morton
@ 2007-11-26 21:52 ` Christoph Lameter
2007-11-26 21:57 ` Andrew Morton
0 siblings, 1 reply; 128+ messages in thread
From: Christoph Lameter @ 2007-11-26 21:52 UTC (permalink / raw)
To: Andrew Morton; +Cc: randy.dunlap, linux-kernel
On Mon, 26 Nov 2007, Andrew Morton wrote:
> Unfortunately I just dropped that patch because git-x86 has gone and
> combined include/asm-x86/sparsemem_32.h and include/asm-x86/sparsemem_64.h
> into the same file.
git-x86 still contains separate sparsemem_32/64.h here.
git lag?
christoph@stapp:~/x86/linux-2.6-x86/.git$ cat config
[core]
repositoryformatversion = 0
filemode = true
bare = false
logallrefupdates = true
[remote "origin"]
url =
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
fetch = +refs/heads/*:refs/remotes/origin/*
[branch "master"]
remote = origin
merge = refs/heads/master
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH -mm] x86 allnoconfig memory model
2007-11-26 21:52 ` Christoph Lameter
@ 2007-11-26 21:57 ` Andrew Morton
2007-11-26 23:19 ` Christoph Lameter
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-26 21:57 UTC (permalink / raw)
To: Christoph Lameter; +Cc: randy.dunlap, linux-kernel
On Mon, 26 Nov 2007 13:52:31 -0800 (PST)
Christoph Lameter <clameter@sgi.com> wrote:
> On Mon, 26 Nov 2007, Andrew Morton wrote:
>
> > Unfortunately I just dropped that patch because git-x86 has gone and
> > combined include/asm-x86/sparsemem_32.h and include/asm-x86/sparsemem_64.h
> > into the same file.
>
> git-x86 still contains separate sparsemem_32/64.h here.
> git lag?
yup
> christoph@stapp:~/x86/linux-2.6-x86/.git$ cat config
> [core]
> repositoryformatversion = 0
> filemode = true
> bare = false
> logallrefupdates = true
> [remote "origin"]
> url =
> git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
> fetch = +refs/heads/*:refs/remotes/origin/*
> [branch "master"]
> remote = origin
> merge = refs/heads/master
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git#mm
a) I use the #mm branch
b) I go direct to master.kernel.org. Probably that's only worth five
minutes nowadays - it used to be worth hours, but kernel.org got better.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 20:45 ` Ingo Molnar
@ 2007-11-26 22:08 ` Jiri Slaby
2007-11-26 22:17 ` Andrew Morton
0 siblings, 1 reply; 128+ messages in thread
From: Jiri Slaby @ 2007-11-26 22:08 UTC (permalink / raw)
To: Ingo Molnar
Cc: Andrew Morton, Rik van Riel, kamalesh, linux-kernel, apw, balbir,
linux-acpi, tglx, Christoph Lameter
On 11/26/2007 09:45 PM, Ingo Molnar wrote:
> * Andrew Morton <akpm@linux-foundation.org> wrote:
>
>> On Mon, 26 Nov 2007 14:39:43 -0500
>> Rik van Riel <riel@redhat.com> wrote:
>>
>>> On Tue, 20 Nov 2007 22:18:39 -0800
>>> Andrew Morton <akpm@linux-foundation.org> wrote:
>>>
>>>>> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>>>>> Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
>>>> ACPI or x86 breakage, I guess.
>>>>
>>>> Did 'noapic' work?
>>> I got the same bug as above, 'noapic' gets past that point
>> We still don't know what caused this, afaik.
>
> yes. Is it a regression? If yes, could someone try to bisect it so that
> we can fix it? If it's caused by x86.git then the 'mm' branch of the x86
> git tree can be used for bisection:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
I did, but it's hard, if you don't know the BAD point. HEAD boots fine and 'x86:
randomize brk' too (the top of git-x86.patch). Andrew, how do you pull it, git
#mm doesn't fit to the ids from the patch.
Maybe if you can emit a broken-out with the fresh pull to test?
regards,
--
Jiri Slaby (jirislaby@gmail.com)
Faculty of Informatics, Masaryk University
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 22:08 ` Jiri Slaby
@ 2007-11-26 22:17 ` Andrew Morton
2007-11-26 22:22 ` Jiri Slaby
2007-11-26 23:14 ` Jiri Slaby
0 siblings, 2 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-26 22:17 UTC (permalink / raw)
To: Jiri Slaby
Cc: mingo, riel, kamalesh, linux-kernel, apw, balbir, linux-acpi,
tglx, clameter
On Mon, 26 Nov 2007 23:08:33 +0100
Jiri Slaby <jirislaby@gmail.com> wrote:
> On 11/26/2007 09:45 PM, Ingo Molnar wrote:
> > * Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> >> On Mon, 26 Nov 2007 14:39:43 -0500
> >> Rik van Riel <riel@redhat.com> wrote:
> >>
> >>> On Tue, 20 Nov 2007 22:18:39 -0800
> >>> Andrew Morton <akpm@linux-foundation.org> wrote:
> >>>
> >>>>> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> >>>>> Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter
> >>>> ACPI or x86 breakage, I guess.
> >>>>
> >>>> Did 'noapic' work?
> >>> I got the same bug as above, 'noapic' gets past that point
> >> We still don't know what caused this, afaik.
> >
> > yes. Is it a regression? If yes, could someone try to bisect it so that
> > we can fix it? If it's caused by x86.git then the 'mm' branch of the x86
> > git tree can be used for bisection:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
>
> I did, but it's hard, if you don't know the BAD point. HEAD boots fine and 'x86:
> randomize brk' too (the top of git-x86.patch).
So the bug wasn't in git-x86 in 2.6.24-rc3-mm1.
But it might be in there now, as some patches got moved over.
Or it could be git-acpi. Or lots of other things.
> Andrew, how do you pull it, git
> #mm doesn't fit to the ids from the patch.
The -mm git tree reimports the plain git-foo.patch files back into a new
git tree, so the commit IDs won't line up.
The way to find the culprit patch in 2.6.24-rc3-mm1 is
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt. It
will be quite quick.
> Maybe if you can emit a broken-out with the fresh pull to test?
http://userweb.kernel.org/~akpm/mmotm/ is current. But it probably won't
compile. I'd suggest bisecting 2.6.24-rc3-mm1 would be easier.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 22:17 ` Andrew Morton
@ 2007-11-26 22:22 ` Jiri Slaby
2007-11-26 23:14 ` Jiri Slaby
1 sibling, 0 replies; 128+ messages in thread
From: Jiri Slaby @ 2007-11-26 22:22 UTC (permalink / raw)
To: Andrew Morton
Cc: mingo, riel, kamalesh, linux-kernel, apw, balbir, linux-acpi,
tglx, clameter
On 11/26/2007 11:17 PM, Andrew Morton wrote:
> http://userweb.kernel.org/~akpm/mmotm/ is current. But it probably won't
> compile. I'd suggest bisecting 2.6.24-rc3-mm1 would be easier.
Yes, I've bisected this and it pointed to git-x86.patch + 2 pushed fixes from
series, Then tried x86 git, but its HEAD was OK.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 22:17 ` Andrew Morton
2007-11-26 22:22 ` Jiri Slaby
@ 2007-11-26 23:14 ` Jiri Slaby
2007-11-26 23:28 ` Andrew Morton
1 sibling, 1 reply; 128+ messages in thread
From: Jiri Slaby @ 2007-11-26 23:14 UTC (permalink / raw)
To: Andrew Morton
Cc: mingo, riel, kamalesh, linux-kernel, apw, balbir, linux-acpi,
tglx, clameter
On 11/26/2007 11:17 PM, Andrew Morton wrote:
>> Maybe if you can emit a broken-out with the fresh pull to test?
>
> http://userweb.kernel.org/~akpm/mmotm/ is current. But it probably won't
> compile.
Yes it did :). And it worked. Both in qemu and on my desktop...
qemu output at:
http://www.fi.muni.cz/~xslaby/sklad/qemu-output.txt
thanks,
--
Jiri Slaby (jirislaby@gmail.com)
Faculty of Informatics, Masaryk University
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH -mm] x86 allnoconfig memory model
2007-11-26 21:57 ` Andrew Morton
@ 2007-11-26 23:19 ` Christoph Lameter
0 siblings, 0 replies; 128+ messages in thread
From: Christoph Lameter @ 2007-11-26 23:19 UTC (permalink / raw)
To: Andrew Morton; +Cc: randy.dunlap, linux-kernel
On Mon, 26 Nov 2007, Andrew Morton wrote:
> b) I go direct to master.kernel.org. Probably that's only worth five
> minutes nowadays - it used to be worth hours, but kernel.org got better.
Updated patch (including Randy's fix) against git-x86 mm.
x86_64: Make sparsemem/vmemmap the only memory model V3
V2->V3:
- Rediff against mm git-x86
V1->V2:
- Rediff against new upstream x86 code that unifies the Kconfig files.
Use sparsemem as the only memory model for UP, SMP and NUMA.
Measurements indicate that DISCONTIGMEM has a higher overhead
than sparsemem. And FLATMEMs benefits are minimal. So I think its
best to simply standardize on sparsemem.
Results of page allocator tests (test can be had via git from slab git
tree branch tests)
Measurements in cycle counts. 1000 allocations were performed and then the
average cycle count was calculated.
Order FlatMem Discontig SparseMem
0 639 665 641
1 567 647 593
2 679 774 692
3 763 967 781
4 961 1501 962
5 1356 2344 1392
6 2224 3982 2336
7 4869 7225 5074
8 12500 14048 12732
9 27926 28223 28165
10 58578 58714 58682
(Note that FlatMem is an SMP config and the rest NUMA configurations)
Memory use:
SMP Sparsemem
-------------
Kernel size:
text data bss dec hex filename
3849268 397739 1264856 5511863 541ab7 vmlinux
total used free shared buffers cached
Mem: 8242252 41164 8201088 0 352 11512
-/+ buffers/cache: 29300 8212952
Swap: 9775512 0 9775512
SMP Flatmem
-----------
Kernel size:
text data bss dec hex filename
3844612 397739 1264536 5506887 540747 vmlinux
So 4.5k growth in text size vs. FLATMEM.
total used free shared buffers cached
Mem: 8244052 40544 8203508 0 352 11484
-/+ buffers/cache: 28708 8215344
2k growth in overall memory use after boot.
NUMA discontig:
text data bss dec hex filename
3888124 470659 1276504 5635287 55fcd7 vmlinux
total used free shared buffers cached
Mem: 8256256 56908 8199348 0 352 11496
-/+ buffers/cache: 45060 8211196
Swap: 9775512 0 9775512
NUMA sparse:
text data bss dec hex filename
3896428 470659 1276824 5643911 561e87 vmlinux
8k text growth. Given that we fully inline virt_to_page and friends now
that is rather good.
total used free shared buffers cached
Mem: 8264720 57240 8207480 0 352 11516
-/+ buffers/cache: 45372 8219348
Swap: 9775512 0 9775512
The total available memory is increased by 8k.
This patch makes sparsemem the default and removes discontig and
flatmem support from x86.
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
---
arch/x86/Kconfig | 22 +++++---------
arch/x86/configs/x86_64_defconfig | 9 -----
arch/x86/kernel/machine_kexec_64.c | 5 ---
arch/x86/mm/init_64.c | 30 -------------------
arch/x86/mm/ioremap_64.c | 17 -----------
arch/x86/mm/numa_64.c | 21 -------------
arch/x86/mm/srat_64.c | 57 -------------------------------------
include/asm-x86/mmzone_64.h | 6 ---
include/asm-x86/page_64.h | 3 -
9 files changed, 9 insertions(+), 161 deletions(-)
Index: linux-2.6-x86/arch/x86/configs/x86_64_defconfig
===================================================================
--- linux-2.6-x86.orig/arch/x86/configs/x86_64_defconfig 2007-11-26 13:53:18.927361771 -0800
+++ linux-2.6-x86/arch/x86/configs/x86_64_defconfig 2007-11-26 15:15:41.430361615 -0800
@@ -145,15 +145,6 @@ CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
Index: linux-2.6-x86/arch/x86/kernel/machine_kexec_64.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/machine_kexec_64.c 2007-11-26 13:53:18.939362118 -0800
+++ linux-2.6-x86/arch/x86/kernel/machine_kexec_64.c 2007-11-26 15:15:41.430361615 -0800
@@ -234,10 +234,5 @@ NORET_TYPE void machine_kexec(struct kim
void arch_crash_save_vmcoreinfo(void)
{
VMCOREINFO_SYMBOL(init_level4_pgt);
-
-#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE
- VMCOREINFO_SYMBOL(node_data);
- VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
-#endif
}
Index: linux-2.6-x86/arch/x86/mm/ioremap_64.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/mm/ioremap_64.c 2007-11-26 13:53:18.951362033 -0800
+++ linux-2.6-x86/arch/x86/mm/ioremap_64.c 2007-11-26 15:15:41.430361615 -0800
@@ -86,23 +86,6 @@ void __iomem * __ioremap(unsigned long p
if (phys_addr >= ISA_START_ADDRESS && last_addr < ISA_END_ADDRESS)
return (__force void __iomem *)phys_to_virt(phys_addr);
-#ifdef CONFIG_FLATMEM
- /*
- * Don't allow anybody to remap normal RAM that we're using..
- */
- if (last_addr < virt_to_phys(high_memory)) {
- char *t_addr, *t_end;
- struct page *page;
-
- t_addr = __va(phys_addr);
- t_end = t_addr + (size - 1);
-
- for(page = virt_to_page(t_addr); page <= virt_to_page(t_end); page++)
- if(!PageReserved(page))
- return NULL;
- }
-#endif
-
pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_GLOBAL
| _PAGE_DIRTY | _PAGE_ACCESSED | flags);
/*
Index: linux-2.6-x86/arch/x86/mm/numa_64.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/mm/numa_64.c 2007-11-26 15:15:26.130611458 -0800
+++ linux-2.6-x86/arch/x86/mm/numa_64.c 2007-11-26 15:15:41.430361615 -0800
@@ -153,12 +153,10 @@ int __init compute_hash_shift(struct boo
return shift;
}
-#ifdef CONFIG_SPARSEMEM
int early_pfn_to_nid(unsigned long pfn)
{
return phys_to_nid(pfn << PAGE_SHIFT);
}
-#endif
static void * __init early_node_mem(int nodeid, unsigned long start,
unsigned long end, unsigned long size)
@@ -635,23 +633,4 @@ void __init init_cpu_to_node(void)
}
}
-#ifdef CONFIG_DISCONTIGMEM
-/*
- * Functions to convert PFNs from/to per node page addresses.
- * These are out of line because they are quite big.
- * They could be all tuned by pre caching more state.
- * Should do that.
- */
-int pfn_valid(unsigned long pfn)
-{
- unsigned nid;
- if (pfn >= num_physpages)
- return 0;
- nid = pfn_to_nid(pfn);
- if (nid == 0xff)
- return 0;
- return pfn >= node_start_pfn(nid) && (pfn) < node_end_pfn(nid);
-}
-EXPORT_SYMBOL(pfn_valid);
-#endif
Index: linux-2.6-x86/include/asm-x86/mmzone_64.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/mmzone_64.h 2007-11-26 15:15:26.471361483 -0800
+++ linux-2.6-x86/include/asm-x86/mmzone_64.h 2007-11-26 15:15:41.430361615 -0800
@@ -43,12 +43,6 @@ static inline __attribute__((pure)) int
extern int early_pfn_to_nid(unsigned long pfn);
-#ifdef CONFIG_DISCONTIGMEM
-#define pfn_to_nid(pfn) phys_to_nid((unsigned long)(pfn) << PAGE_SHIFT)
-
-extern int pfn_valid(unsigned long pfn);
-#endif
-
#ifdef CONFIG_NUMA_EMU
#define FAKE_NODE_MIN_SIZE (64*1024*1024)
#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1uL))
Index: linux-2.6-x86/include/asm-x86/page_64.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/page_64.h 2007-11-26 15:15:26.475361591 -0800
+++ linux-2.6-x86/include/asm-x86/page_64.h 2007-11-26 15:15:41.430361615 -0800
@@ -127,9 +127,6 @@ extern unsigned long __phys_addr(unsigne
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
#define __boot_va(x) __va(x)
#define __boot_pa(x) __pa(x)
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) < end_pfn)
-#endif
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
Index: linux-2.6-x86/arch/x86/mm/init_64.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/mm/init_64.c 2007-11-26 15:15:26.122611468 -0800
+++ linux-2.6-x86/arch/x86/mm/init_64.c 2007-11-26 15:15:41.430361615 -0800
@@ -486,34 +486,6 @@ EXPORT_SYMBOL_GPL(memory_add_physaddr_to
#endif /* CONFIG_MEMORY_HOTPLUG */
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
-/*
- * Memory Hotadd without sparsemem. The mem_maps have been allocated in advance,
- * just online the pages.
- */
-int __add_pages(struct zone *z, unsigned long start_pfn, unsigned long nr_pages)
-{
- int err = -EIO;
- unsigned long pfn;
- unsigned long total = 0, mem = 0;
- for (pfn = start_pfn; pfn < start_pfn + nr_pages; pfn++) {
- if (pfn_valid(pfn)) {
- online_page(pfn_to_page(pfn));
- err = 0;
- mem++;
- }
- total++;
- }
- if (!err) {
- z->spanned_pages += total;
- z->present_pages += mem;
- z->zone_pgdat->node_spanned_pages += total;
- z->zone_pgdat->node_present_pages += mem;
- }
- return err;
-}
-#endif
-
static struct kcore_list kcore_mem, kcore_vmalloc, kcore_kernel, kcore_modules,
kcore_vsyscall;
@@ -739,7 +711,6 @@ const char *arch_vma_name(struct vm_area
return NULL;
}
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
/*
* Initialise the sparsemem vmemmap using huge-pages at the PMD level.
*/
@@ -782,4 +753,3 @@ int __meminit vmemmap_populate(struct pa
return 0;
}
-#endif
Index: linux-2.6-x86/arch/x86/mm/srat_64.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/mm/srat_64.c 2007-11-26 13:53:18.983361973 -0800
+++ linux-2.6-x86/arch/x86/mm/srat_64.c 2007-11-26 15:15:41.434361980 -0800
@@ -151,62 +151,6 @@ acpi_numa_processor_affinity_init(struct
pxm, pa->apic_id, node);
}
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
-/*
- * Protect against too large hotadd areas that would fill up memory.
- */
-static int hotadd_enough_memory(struct bootnode *nd)
-{
- static unsigned long allocated;
- static unsigned long last_area_end;
- unsigned long pages = (nd->end - nd->start) >> PAGE_SHIFT;
- long mem = pages * sizeof(struct page);
- unsigned long addr;
- unsigned long allowed;
- unsigned long oldpages = pages;
-
- if (mem < 0)
- return 0;
- allowed = (end_pfn - absent_pages_in_range(0, end_pfn)) * PAGE_SIZE;
- allowed = (allowed / 100) * hotadd_percent;
- if (allocated + mem > allowed) {
- unsigned long range;
- /* Give them at least part of their hotadd memory upto hotadd_percent
- It would be better to spread the limit out
- over multiple hotplug areas, but that is too complicated
- right now */
- if (allocated >= allowed)
- return 0;
- range = allowed - allocated;
- pages = (range / PAGE_SIZE);
- mem = pages * sizeof(struct page);
- nd->end = nd->start + range;
- }
- /* Not completely fool proof, but a good sanity check */
- addr = find_e820_area(last_area_end, end_pfn<<PAGE_SHIFT, mem);
- if (addr == -1UL)
- return 0;
- if (pages != oldpages)
- printk(KERN_NOTICE "SRAT: Hotadd area limited to %lu bytes\n",
- pages << PAGE_SHIFT);
- last_area_end = addr + mem;
- allocated += mem;
- return 1;
-}
-
-static int update_end_of_memory(unsigned long end)
-{
- found_add_area = 1;
- if ((end >> PAGE_SHIFT) > end_pfn)
- end_pfn = end >> PAGE_SHIFT;
- return 1;
-}
-
-static inline int save_add_info(void)
-{
- return hotadd_percent > 0;
-}
-#else
int update_end_of_memory(unsigned long end) {return -1;}
static int hotadd_enough_memory(struct bootnode *nd) {return 1;}
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
@@ -214,7 +158,6 @@ static inline int save_add_info(void) {r
#else
static inline int save_add_info(void) {return 0;}
#endif
-#endif
/*
* Update nodes_add and decide if to include add are in the zone.
* Both SPARSE and RESERVE need nodes_add infomation.
Index: linux-2.6-x86/arch/x86/Kconfig
===================================================================
--- linux-2.6-x86.orig/arch/x86/Kconfig 2007-11-26 15:15:25.194361726 -0800
+++ linux-2.6-x86/arch/x86/Kconfig 2007-11-26 15:17:40.310569645 -0800
@@ -912,25 +912,29 @@ config HAVE_ARCH_ALLOC_REMAP
config ARCH_FLATMEM_ENABLE
def_bool y
- depends on (X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC) || (X86_64 && !NUMA)
+ depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
- depends on NUMA
+ depends on NUMA && X86_32
config ARCH_DISCONTIGMEM_DEFAULT
def_bool y
- depends on NUMA
+ depends on NUMA && X86_32
+
+config ARCH_SPARSEMEM_DEFAULT
+ def_bool y
+ depends on X86_64
config ARCH_SPARSEMEM_ENABLE
def_bool y
- depends on NUMA || (EXPERIMENTAL && (X86_PC || X86_64))
+ depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC)
select SPARSEMEM_STATIC if X86_32
select SPARSEMEM_VMEMMAP_ENABLE if X86_64
config ARCH_SELECT_MEMORY_MODEL
def_bool y
- depends on X86_32 && ARCH_SPARSEMEM_ENABLE
+ depends on ARCH_SPARSEMEM_ENABLE
config ARCH_MEMORY_PROBE
def_bool X86_64
@@ -1228,18 +1232,10 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
def_bool y
depends on X86_64 || (X86_32 && HIGHMEM)
-config MEMORY_HOTPLUG_RESERVE
- def_bool X86_64
- depends on (MEMORY_HOTPLUG && DISCONTIGMEM)
-
config HAVE_ARCH_EARLY_PFN_TO_NID
def_bool X86_64
depends on NUMA
-config OUT_OF_LINE_PFN_TO_PAGE
- def_bool X86_64
- depends on DISCONTIGMEM
-
menu "Power management options"
depends on !X86_VOYAGER
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 23:14 ` Jiri Slaby
@ 2007-11-26 23:28 ` Andrew Morton
2007-11-27 17:50 ` Rik van Riel
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-26 23:28 UTC (permalink / raw)
To: Jiri Slaby
Cc: mingo, riel, kamalesh, linux-kernel, apw, balbir, linux-acpi,
tglx, clameter
On Tue, 27 Nov 2007 00:14:17 +0100
Jiri Slaby <jirislaby@gmail.com> wrote:
> On 11/26/2007 11:17 PM, Andrew Morton wrote:
> >> Maybe if you can emit a broken-out with the fresh pull to test?
> >
> > http://userweb.kernel.org/~akpm/mmotm/ is current. But it probably won't
> > compile.
>
> Yes it did :). And it worked. Both in qemu and on my desktop...
boggle. Let's slap 2.6.25 on it and take the rest of the year off.
> qemu output at:
> http://www.fi.muni.cz/~xslaby/sklad/qemu-output.txt
Thanks for testing.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-23 5:55 ` 2.6.24-rc3-mm1 Gabriel C
@ 2007-11-27 6:15 ` Andrew Morton
2007-12-11 16:33 ` 2.6.24-rc3-mm1 James Bottomley
0 siblings, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-27 6:15 UTC (permalink / raw)
To: Gabriel C; +Cc: linux-kernel, linux-scsi, Hannes Reinecke, James Bottomley
On Fri, 23 Nov 2007 06:55:41 +0100 Gabriel C <nix.or.die@googlemail.com> wrote:
> Andrew Morton wrote:
> > On Fri, 23 Nov 2007 02:39:08 +0100 Gabriel C <nix.or.die@googlemail.com> wrote:
> >
> >> I have some warnings on each SCSI disc:
> >>
> >>
> >> ...
> >>
> >> [ 30.724410] scsi 0:0:0:0: Direct-Access SEAGATE ST318406LW 0109 PQ: 0 ANSI: 3
> >> [ 30.724419] scsi0:A:0:0: Tagged Queuing enabled. Depth 32
> >> [ 30.724435] target0:0:0: Beginning Domain Validation
> >> [ 30.724446] target0:0:0: Domain Validation Initial Inquiry Failed <--
> >> [ 30.724572] target0:0:0: Ending Domain Validation
> >> [ 30.729747] scsi 0:0:1:0: Direct-Access FUJITSU MAH3182MP 0114 PQ: 0 ANSI: 4
> >> [ 30.729754] scsi0:A:1:0: Tagged Queuing enabled. Depth 32
> >> [ 30.729771] target0:0:1: Beginning Domain Validation
> >> [ 30.729780] target0:0:1: Domain Validation Initial Inquiry Failed <--
> >> [ 30.729908] target0:0:1: Ending Domain Validation
> >>
> >
> > Don't know what would have caused that. But yes, something is wrong in
> > scsi land.
>
> Actually I'm lucky the author didn't fix that FIXME in scsi_transport_spi.c and I still can boot ;)
>
> >
> >> no idea whatever this is related but buffered disk reads are 2.XX MB/sec and the box is somewhat laggy.
> >>
> >> hdparm -t on sda and sdb reports :
> >>
> >> /dev/sda:
> >> Timing buffered disk reads: 8 MB in 3.26 seconds = 2.46 MB/sec
> >>
> >> /dev/sdb:
> >> Timing buffered disk reads: 8 MB in 3.56 seconds = 2.25 MB/sec
> >>
> >> My IDE discs are fine.
> >>
> >> Please let me know if you need my config or any other informations.
> >>
> >
> > And you're the second to report very slow scsi throughput in 2.6.24-rc3-mm1.
> >
>
> I found the commit which cause these problems , it is in git-scsi-misc patch and reverting it fixes both problems for me.
>
> http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=commitdiff_plain;h=8655a546c83fc43f0a73416bbd126d02de7ad6c0;hp=5bc717b6bdaaf52edf365eb7d9d8c89fec79df5d
>
OK, thanks. I'll assume that James and Hannes have this in hand (or will
have, by mid-week) and I won't do anything here.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - brick my Dell Latitude D820
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
` (11 preceding siblings ...)
2007-11-26 19:13 ` 2.6.24-rc3-mm1 Randy Dunlap
@ 2007-11-27 7:16 ` Valdis.Kletnieks
2007-11-27 7:27 ` Andrew Morton
2007-11-27 8:25 ` Dave Young
12 siblings, 2 replies; 128+ messages in thread
From: Valdis.Kletnieks @ 2007-11-27 7:16 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1743 bytes --]
On Tue, 20 Nov 2007 20:45:25 PST, Andrew Morton said:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
Finally got both time and motivation to at least start a bisect..
2.6.23-mm1 works on my D820 (x86_64 kernel, Core2 Duo T7200)
24-rc3-mm1 (plus 3 patches from hotfixes/) bricks *instantly* at boot - grub
prints its 3 or 4 lines saying what it loaded, the screen clears, and *blam*
dead. No serial console output, no pair of penguins on the monitor, no
netconsole, no earlyprintk=vga output, no alt-sysrq, only thing that does
*anything* is "hold the power button for 5 seconds". Whatever it is, it
happens *very* early (before we get as far as the 'Linux version 2.6.mumble'
banner), and happens *hard*.
I've bisected it down this far:
git-ipwireless_cs.patch GOOD
git-x86.patch
git-x86-fixup.patch
git-x86-thread_order-borkage.patch
git-x86-thread_order-borkage-fix.patch
git-x86-identify_cpu-fix.patch
git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko.patch
git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko-checkpatch-fixes.patch
git-x86-inlining-borkage.patch
x86_64-set-cpu_index-to-nr_cpus-instead-of-0.patch
x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2.patch BAD
Anybody got any good debugging ideas before I go through and do the final
3 or 4 bisects? I suspect I'll need them once I find the offending patch
to tell *why* said patch dies on my box - I've seen enough traffic regarding
-rc3-mm1 dying *later* to know it's probably a subtle issue and not one
that will be obvious once I finger a specific patch. For example, it's
probably not the IO-APIC panic that people are seeing, because their kernels
live long enough to panic. ;)
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - brick my Dell Latitude D820
2007-11-27 7:16 ` 2.6.24-rc3-mm1 - brick my Dell Latitude D820 Valdis.Kletnieks
@ 2007-11-27 7:27 ` Andrew Morton
2007-11-27 7:54 ` Valdis.Kletnieks
2007-11-27 10:25 ` Ingo Molnar
2007-11-27 8:25 ` Dave Young
1 sibling, 2 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-27 7:27 UTC (permalink / raw)
To: Valdis.Kletnieks; +Cc: linux-kernel
On Tue, 27 Nov 2007 02:16:26 -0500 Valdis.Kletnieks@vt.edu wrote:
> On Tue, 20 Nov 2007 20:45:25 PST, Andrew Morton said:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>
> Finally got both time and motivation to at least start a bisect..
>
> 2.6.23-mm1 works on my D820 (x86_64 kernel, Core2 Duo T7200)
>
> 24-rc3-mm1 (plus 3 patches from hotfixes/) bricks *instantly* at boot - grub
> prints its 3 or 4 lines saying what it loaded, the screen clears, and *blam*
> dead. No serial console output, no pair of penguins on the monitor, no
> netconsole, no earlyprintk=vga output, no alt-sysrq, only thing that does
> *anything* is "hold the power button for 5 seconds". Whatever it is, it
> happens *very* early (before we get as far as the 'Linux version 2.6.mumble'
> banner), and happens *hard*.
>
> I've bisected it down this far:
>
> git-ipwireless_cs.patch GOOD
> git-x86.patch
> git-x86-fixup.patch
> git-x86-thread_order-borkage.patch
> git-x86-thread_order-borkage-fix.patch
> git-x86-identify_cpu-fix.patch
> git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko.patch
> git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko-checkpatch-fixes.patch
> git-x86-inlining-borkage.patch
> x86_64-set-cpu_index-to-nr_cpus-instead-of-0.patch
> x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2.patch BAD
>
> Anybody got any good debugging ideas before I go through and do the final
> 3 or 4 bisects? I suspect I'll need them once I find the offending patch
> to tell *why* said patch dies on my box - I've seen enough traffic regarding
> -rc3-mm1 dying *later* to know it's probably a subtle issue and not one
> that will be obvious once I finger a specific patch. For example, it's
> probably not the IO-APIC panic that people are seeing, because their kernels
> live long enough to panic. ;)
>
You could try http://userweb.kernel.org/~akpm/mmotm/ - we might have already
fixed it.
Otherwise, please proceed to work out which diff I need to drop and hope like
hell that it isn't git-x86..
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - brick my Dell Latitude D820
2007-11-27 7:27 ` Andrew Morton
@ 2007-11-27 7:54 ` Valdis.Kletnieks
2007-11-27 8:17 ` Andrew Morton
2007-11-27 10:25 ` Ingo Molnar
1 sibling, 1 reply; 128+ messages in thread
From: Valdis.Kletnieks @ 2007-11-27 7:54 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1309 bytes --]
On Mon, 26 Nov 2007 23:27:03 PST, Andrew Morton said:
> > git-x86.patch
> > git-x86-fixup.patch
> > git-x86-thread_order-borkage.patch
> > git-x86-thread_order-borkage-fix.patch
> > git-x86-identify_cpu-fix.patch
> > git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko.patch
> > git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko-checkpatch-fixes.patch
> > git-x86-inlining-borkage.patch
> > x86_64-set-cpu_index-to-nr_cpus-instead-of-0.patch
> > x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2.patch BAD
> You could try http://userweb.kernel.org/~akpm/mmotm/ - we might have already
> fixed it.
I suspect that trying -rc3-mm1 but refreshing just the 10 patches above
from -mmotm would be far less likely to pull in other heartburn?
> Otherwise, please proceed to work out which diff I need to drop and hope like
> hell that it isn't git-x86..
That's a 41,240 line diff, the rest *total* to about 400 lines. I don't have
warm-n-fuzzies about my odds here. ;)
I'm a git-idiot, but *do* know how to git-bisect through Linus tree - what
would I need to do to git-bisect through git-x86.patch? (I do *not* know how
to deal with more than 1 source git tree, so if the magic is just 'get a
linus tree, merge git-x86, then bisect as usual", I'm stuck on "merge git-x86")..
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - brick my Dell Latitude D820
2007-11-27 7:54 ` Valdis.Kletnieks
@ 2007-11-27 8:17 ` Andrew Morton
0 siblings, 0 replies; 128+ messages in thread
From: Andrew Morton @ 2007-11-27 8:17 UTC (permalink / raw)
To: Valdis.Kletnieks; +Cc: linux-kernel
On Tue, 27 Nov 2007 02:54:56 -0500 Valdis.Kletnieks@vt.edu wrote:
> On Mon, 26 Nov 2007 23:27:03 PST, Andrew Morton said:
>
> > > git-x86.patch
> > > git-x86-fixup.patch
> > > git-x86-thread_order-borkage.patch
> > > git-x86-thread_order-borkage-fix.patch
> > > git-x86-identify_cpu-fix.patch
> > > git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko.patch
> > > git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko-checkpatch-fixes.patch
> > > git-x86-inlining-borkage.patch
> > > x86_64-set-cpu_index-to-nr_cpus-instead-of-0.patch
> > > x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2.patch BAD
>
> > You could try http://userweb.kernel.org/~akpm/mmotm/ - we might have already
> > fixed it.
>
> I suspect that trying -rc3-mm1 but refreshing just the 10 patches above
> from -mmotm would be far less likely to pull in other heartburn?
All the above are no longer in -mm. They got merged, dropped,
otherwise-fixed, etc.
> > Otherwise, please proceed to work out which diff I need to drop and hope like
> > hell that it isn't git-x86..
>
> That's a 41,240 line diff, the rest *total* to about 400 lines. I don't have
> warm-n-fuzzies about my odds here. ;)
No.
> I'm a git-idiot, but *do* know how to git-bisect through Linus tree - what
> would I need to do to git-bisect through git-x86.patch? (I do *not* know how
> to deal with more than 1 source git tree, so if the magic is just 'get a
> linus tree, merge git-x86, then bisect as usual", I'm stuck on "merge git-x86")..
umm, I'm minimally git-afflicted hence am the wrong person to ask.
Something like:
- checkout Linus's tree
- echo 'git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git#mm' > .git/branches/git-x86
- git-fetch git-x86
- git-checkout git-x86
- start bisecting.
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - brick my Dell Latitude D820
2007-11-27 7:16 ` 2.6.24-rc3-mm1 - brick my Dell Latitude D820 Valdis.Kletnieks
2007-11-27 7:27 ` Andrew Morton
@ 2007-11-27 8:25 ` Dave Young
2007-11-27 8:46 ` Valdis.Kletnieks
1 sibling, 1 reply; 128+ messages in thread
From: Dave Young @ 2007-11-27 8:25 UTC (permalink / raw)
To: Valdis.Kletnieks; +Cc: Andrew Morton, linux-kernel
On Nov 27, 2007 3:16 PM, <Valdis.Kletnieks@vt.edu> wrote:
> On Tue, 20 Nov 2007 20:45:25 PST, Andrew Morton said:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/
>
> Finally got both time and motivation to at least start a bisect..
>
> 2.6.23-mm1 works on my D820 (x86_64 kernel, Core2 Duo T7200)
>
> 24-rc3-mm1 (plus 3 patches from hotfixes/) bricks *instantly* at boot - grub
> prints its 3 or 4 lines saying what it loaded, the screen clears, and *blam*
> dead. No serial console output, no pair of penguins on the monitor, no
> netconsole, no earlyprintk=vga output, no alt-sysrq, only thing that does
> *anything* is "hold the power button for 5 seconds". Whatever it is, it
> happens *very* early (before we get as far as the 'Linux version 2.6.mumble'
> banner), and happens *hard*.
>
> I've bisected it down this far:
>
> git-ipwireless_cs.patch GOOD
> git-x86.patch
> git-x86-fixup.patch
> git-x86-thread_order-borkage.patch
> git-x86-thread_order-borkage-fix.patch
> git-x86-identify_cpu-fix.patch
> git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko.patch
> git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko-checkpatch-fixes.patch
> git-x86-inlining-borkage.patch
> x86_64-set-cpu_index-to-nr_cpus-instead-of-0.patch
> x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2.patch BAD
>
> Anybody got any good debugging ideas before I go through and do the final
> 3 or 4 bisects? I suspect I'll need them once I find the offending patch
> to tell *why* said patch dies on my box - I've seen enough traffic regarding
> -rc3-mm1 dying *later* to know it's probably a subtle issue and not one
> that will be obvious once I finger a specific patch. For example, it's
> probably not the IO-APIC panic that people are seeing, because their kernels
> live long enough to panic. ;)
Hi,
does boot_delay helps?
Regards
dave
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - brick my Dell Latitude D820
2007-11-27 8:25 ` Dave Young
@ 2007-11-27 8:46 ` Valdis.Kletnieks
0 siblings, 0 replies; 128+ messages in thread
From: Valdis.Kletnieks @ 2007-11-27 8:46 UTC (permalink / raw)
To: Dave Young; +Cc: Andrew Morton, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 313 bytes --]
On Tue, 27 Nov 2007 16:25:22 +0800, Dave Young said:
> does boot_delay helps?
It might, if the kernel lived long enough to output a first printk for
us to delay after. :)
Shooting this one would be *easy* if the problem was an boot-time oops that
would otherwise scroll off the screen without a boot_delay...
[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - brick my Dell Latitude D820
2007-11-27 7:27 ` Andrew Morton
2007-11-27 7:54 ` Valdis.Kletnieks
@ 2007-11-27 10:25 ` Ingo Molnar
1 sibling, 0 replies; 128+ messages in thread
From: Ingo Molnar @ 2007-11-27 10:25 UTC (permalink / raw)
To: Andrew Morton; +Cc: Valdis.Kletnieks, linux-kernel
* Andrew Morton <akpm@linux-foundation.org> wrote:
> Otherwise, please proceed to work out which diff I need to drop and
> hope like hell that it isn't git-x86..
hm? x86.git is fully bisectable - so a more accurate statement would be
"and hope that it's x86.git, so that it can be properly bisected" :-)
For x86.git bisection, pull the 'mm' branch from:
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
Ingo
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC
2007-11-26 23:28 ` Andrew Morton
@ 2007-11-27 17:50 ` Rik van Riel
0 siblings, 0 replies; 128+ messages in thread
From: Rik van Riel @ 2007-11-27 17:50 UTC (permalink / raw)
To: Andrew Morton
Cc: Jiri Slaby, mingo, kamalesh, linux-kernel, apw, balbir,
linux-acpi, tglx, clameter
On Mon, 26 Nov 2007 15:28:32 -0800
Andrew Morton <akpm@linux-foundation.org> wrote:
> On Tue, 27 Nov 2007 00:14:17 +0100
> Jiri Slaby <jirislaby@gmail.com> wrote:
>
> > On 11/26/2007 11:17 PM, Andrew Morton wrote:
> > >> Maybe if you can emit a broken-out with the fresh pull to test?
> > >
> > > http://userweb.kernel.org/~akpm/mmotm/ is current. But it probably won't
> > > compile.
> >
> > Yes it did :). And it worked. Both in qemu and on my desktop...
>
> boggle. Let's slap 2.6.25 on it and take the rest of the year off.
No worries, the mmotm compiling issue seems to have been fixed:
CC [M] drivers/scsi/libsas/sas_ata.o
drivers/scsi/libsas/sas_ata.c:39: error: field ‘rphy’ has incomplete type
drivers/scsi/libsas/sas_ata.c: In function ‘sas_discover_sata’:
drivers/scsi/libsas/sas_ata.c:773: error: implicit declaration of function ‘ata_sas_rphy_alloc’
drivers/scsi/libsas/sas_ata.c:775: error: dereferencing pointer to incomplete type
drivers/scsi/libsas/sas_ata.c:775: warning: assignment makes pointer from integer without a cast
drivers/scsi/libsas/sas_ata.c:781: error: dereferencing pointer to incomplete type
drivers/scsi/libsas/sas_ata.c:782: error: dereferencing pointer to incomplete type
drivers/scsi/libsas/sas_ata.c:784: warning: type defaults to ‘int’ in declaration of ‘__mptr’
drivers/scsi/libsas/sas_ata.c:784: warning: initialization from incompatible pointer type
drivers/scsi/libsas/sas_ata.c:791: error: implicit declaration of function ‘ata_sas_rphy_add’
drivers/scsi/libsas/sas_ata.c:807: error: implicit declaration of function ‘ata_sas_rphy_delete’
drivers/scsi/libsas/sas_ata.c:809: error: implicit declaration of function ‘ata_sas_rphy_free’
make[3]: *** [drivers/scsi/libsas/sas_ata.o] Error 1
make[2]: *** [drivers/scsi/libsas] Error 2
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2
So much for continuing the bisect with that tree, to find the
cause of the second bug :)
Guess I'll extract an x86 tree changeset first, to place into
the 2.6.23-rc3-mm1 broken out tree and work from there...
--
"Debugging is twice as hard as writing the code in the first place.
Therefore, if you write the code as cleverly as possible, you are,
by definition, not smart enough to debug it." - Brian W. Kernighan
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-21 10:17 ` Avi Kivity
2007-11-21 10:31 ` Robert P. J. Day
@ 2007-11-28 5:02 ` Andrew Morton
2007-12-02 8:56 ` Avi Kivity
1 sibling, 1 reply; 128+ messages in thread
From: Andrew Morton @ 2007-11-28 5:02 UTC (permalink / raw)
To: Avi Kivity; +Cc: Sam Ravnborg, Kamalesh Babulal, linux-kernel, Andy Whitcroft
On Wed, 21 Nov 2007 12:17:14 +0200 Avi Kivity <avi@qumranet.com> wrote:
> Avi Kivity wrote:
> >>>>>
> >>>>>> The make headers_check fails,
> >>>>>>
> >>>>>> CHECK include/linux/usb/gadgetfs.h
> >>>>>> CHECK include/linux/usb/ch9.h
> >>>>>> CHECK include/linux/usb/cdc.h
> >>>>>> CHECK include/linux/usb/audio.h
> >>>>>> CHECK include/linux/kvm.h
> >>>>>> /root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires
> >>>>>> asm/kvm.h, which does not exist in exported headers
> >>>>>>
> >>>>> hm, works for me, on i386 and x86_64. What's different over there?
> >>>>>
> >>>> Hi Andrew,
> >>>>
> >>>> It fails on the powerpc box, with allyesconfig option.
> >>>>
> >>>>
> >>>>
> >>> How do we fix this? Export linux/kvm.h only on x86? Seems ugly.
> >>>
> >>
> >> Is kvm x86 specific? Then move the .h file to asm-x86.
> >> Otherwise no good idea...
> >>
> >>
> >
> > kvm.h is x86 specific today, but will be s390, ppc, ia64, and x86
> > specific tomorrow.
> >
> > What about having a asm-generic/kvm.h with a nice #error? would
> > that suit?
> >
>
> headers_check continues to complain. Is the only recourse to add
> asm/kvm.h for all archs?
>
That would work.
Meanwhile my recourse is to drop the kvm tree ;)
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1: I/O error, system hangs
2007-11-25 20:39 ` Laurent Riffard
@ 2007-11-28 21:38 ` Laurent Riffard
0 siblings, 0 replies; 128+ messages in thread
From: Laurent Riffard @ 2007-11-28 21:38 UTC (permalink / raw)
To: James Bottomley
Cc: Hannes Reinecke, Andrew Morton, linux-kernel, linux-ide, linux-scsi
Le 25.11.2007 21:39, Laurent Riffard a écrit :
> Le 25.11.2007 08:37, James Bottomley a écrit :
>> On Sat, 2007-11-24 at 23:59 +0100, Laurent Riffard wrote:
>>> Le 24.11.2007 14:26, James Bottomley a écrit :
>>>> OK, could you post dmesgs again, please. I actually tested this
>>> with an
>>>> aic79xx card, and for me it does cause Domain Validation to succeed
>>>> again.
>>> James,
>>>
>>> Here is a dmesg produced by 2.6.24-rc3-mm1 + your patch "separates
>>> the
>>> BLOCK and QUIESCE states
>>> correctly" (http://lkml.org/lkml/2007/11/24/8).
>>>
[...]
>>> [ 25.521256] scsi0 : pata_via
>>> [ 25.521711] scsi1 : pata_via
>>> [ 25.524089] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
>>> [ 25.524176] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
>>> [ 25.683141] ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
>>> [ 25.683208] ata1.00: 78165360 sectors, multi 16: LBA
>>> [ 25.683475] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
>>> [ 25.684116] ata1.01: 160086528 sectors, multi 16: LBA
>>> [ 25.691127] ata1.00: configured for UDMA/100
>>> [ 25.699142] ata1.01: configured for UDMA/100
>>> [ 26.170860] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33
>>> [ 26.171562] ata2.01: ATAPI: CD-950E/AKU, A4Q, max MWDMA2, CDB intr
>>> [ 26.330839] ata2.00: configured for UDMA/33
>>> [ 26.490828] ata2.01: configured for MWDMA2
>>> [ 26.503014] scsi 0:0:0:0: Direct-Access ATA ST340016A 3.75 PQ: 0 ANSI: 5
>>> [ 26.504670] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
>>> [ 26.509842] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5
>>> [ 26.511673] scsi 1:0:1:0: CD-ROM E-IDE CD-950E/AKU A4Q PQ: 0 ANSI: 5
>> [...]
>>> [ 60.216113] sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>>> [ 60.216124] end_request: I/O error, dev sda, sector 16460
>> I think this one's quite easy: PATA devices in libata are queue depth 1
>> (since they don't do NCQ). Thus, they're peculiarly sensitive to the
>> bug where we fail over queue depth requests.
>>
>> On the other hand, I don't see how a filesystem request is getting
>> REQ_FAILFAST ... unless there's a bio or readahead issue involved.
>> Anyway, could you try this patch:
>>
>> http://marc.info/?l=linux-scsi&m=119592627425498
>>
>> Which should fix the queue depth issue, and see if the errors go away?
>
> No, this one doesn't help...
still happens with 2.6.24-rc3-mm2...
--
laurent
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1 make headers_check fails
2007-11-28 5:02 ` Andrew Morton
@ 2007-12-02 8:56 ` Avi Kivity
0 siblings, 0 replies; 128+ messages in thread
From: Avi Kivity @ 2007-12-02 8:56 UTC (permalink / raw)
To: Andrew Morton
Cc: Sam Ravnborg, Kamalesh Babulal, linux-kernel, Andy Whitcroft
[-- Attachment #1: Type: text/plain, Size: 1783 bytes --]
Andrew Morton wrote:
> On Wed, 21 Nov 2007 12:17:14 +0200 Avi Kivity <avi@qumranet.com> wrote:
>
>
>> Avi Kivity wrote:
>>
>>>>>>>
>>>>>>>
>>>>>>>> The make headers_check fails,
>>>>>>>>
>>>>>>>> CHECK include/linux/usb/gadgetfs.h
>>>>>>>> CHECK include/linux/usb/ch9.h
>>>>>>>> CHECK include/linux/usb/cdc.h
>>>>>>>> CHECK include/linux/usb/audio.h
>>>>>>>> CHECK include/linux/kvm.h
>>>>>>>> /root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires
>>>>>>>> asm/kvm.h, which does not exist in exported headers
>>>>>>>>
>>>>>>>>
>>>>>>> hm, works for me, on i386 and x86_64. What's different over there?
>>>>>>>
>>>>>>>
>>>>>> Hi Andrew,
>>>>>>
>>>>>> It fails on the powerpc box, with allyesconfig option.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> How do we fix this? Export linux/kvm.h only on x86? Seems ugly.
>>>>>
>>>>>
>>>> Is kvm x86 specific? Then move the .h file to asm-x86.
>>>> Otherwise no good idea...
>>>>
>>>>
>>>>
>>> kvm.h is x86 specific today, but will be s390, ppc, ia64, and x86
>>> specific tomorrow.
>>>
>>> What about having a asm-generic/kvm.h with a nice #error? would
>>> that suit?
>>>
>>>
>> headers_check continues to complain. Is the only recourse to add
>> asm/kvm.h for all archs?
>>
>>
>
> That would work.
>
> Meanwhile my recourse is to drop the kvm tree ;)
>
Since you put it this way...
I committed the attached (sorry) patch to kvm.git. Rather than
touching 2*($NARCH - 1) file, I changed include/linux/Kbuild to only
export kvm.h if the arch actually supports it. Currently that's just x86.
--
error compiling committee.c: too many arguments to function
[-- Attachment #2: 0001-KVM-Export-include-linux-kvm.h-only-if-ARCH-actual.patch --]
[-- Type: text/x-patch, Size: 1876 bytes --]
>From a393444c97f6d7355a6d7d6d7aeb80f1e72472b1 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@qumranet.com>
Date: Sun, 2 Dec 2007 10:50:06 +0200
Subject: [PATCH] KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM
Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h>
includes, not existing. Rather than add a zillion <asm/kvm.h>s, export kvm.h
only if the arch actually supports it.
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
arch/x86/Kconfig | 3 +++
drivers/kvm/Kconfig | 4 ++--
include/linux/Kbuild | 2 +-
3 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 368864d..eded44e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -112,6 +112,9 @@ config GENERIC_TIME_VSYSCALL
bool
default X86_64
+config ARCH_SUPPORTS_KVM
+ bool
+ default y
diff --git a/drivers/kvm/Kconfig b/drivers/kvm/Kconfig
index 6569206..4086080 100644
--- a/drivers/kvm/Kconfig
+++ b/drivers/kvm/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig VIRTUALIZATION
bool "Virtualization"
- depends on X86
+ depends on ARCH_SUPPORTS_KVM || X86
default y
---help---
Say Y here to get to see options for using your Linux host to run other
@@ -16,7 +16,7 @@ if VIRTUALIZATION
config KVM
tristate "Kernel-based Virtual Machine (KVM) support"
- depends on X86 && EXPERIMENTAL
+ depends on ARCH_SUPPORTS_KVM && EXPERIMENTAL
select PREEMPT_NOTIFIERS
select ANON_INODES
---help---
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 105c5d6..397197f 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -254,7 +254,7 @@ unifdef-y += kd.h
unifdef-y += kernelcapi.h
unifdef-y += kernel.h
unifdef-y += keyboard.h
-unifdef-y += kvm.h
+unifdef-$(CONFIG_ARCH_SUPPORTS_KVM) += kvm.h
unifdef-y += llc.h
unifdef-y += loop.h
unifdef-y += lp.h
--
1.5.3
^ permalink raw reply related [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-11-27 6:15 ` 2.6.24-rc3-mm1 Andrew Morton
@ 2007-12-11 16:33 ` James Bottomley
2007-12-12 10:08 ` 2.6.24-rc3-mm1 Boaz Harrosh
2007-12-14 9:00 ` 2.6.24-rc3-mm1 Hannes Reinecke
0 siblings, 2 replies; 128+ messages in thread
From: James Bottomley @ 2007-12-11 16:33 UTC (permalink / raw)
To: Andrew Morton; +Cc: Gabriel C, linux-kernel, linux-scsi, Hannes Reinecke
On Mon, 2007-11-26 at 22:15 -0800, Andrew Morton wrote:
> OK, thanks. I'll assume that James and Hannes have this in hand (or will
> have, by mid-week) and I won't do anything here.
Just to confirm what I think I'm going to be doing: rebasing the
scsi-misc tree to remove this commit:
commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
Author: Hannes Reinecke <hare@suse.de>
Date: Tue Nov 6 09:23:40 2007 +0100
[SCSI] Do not requeue requests if REQ_FAILFAST is set
And its allied fix ups:
commit 983289045faa96fba8841d3c51b98bb8623d9504
Author: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Sat Nov 24 19:47:25 2007 +0200
[SCSI] fix up REQ_FASTFAIL not to fail when state is QUIESCE
commit 9dd15a13b332e9f5c8ee752b1ccd9b84cb5bdf17
Author: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Sat Nov 24 19:55:53 2007 +0200
[SCSI] fix domain validation to work again
James
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-12-11 16:33 ` 2.6.24-rc3-mm1 James Bottomley
@ 2007-12-12 10:08 ` Boaz Harrosh
2007-12-12 11:03 ` [PATCH] REQ-flags to/from BIO-flags bugfix Boaz Harrosh
2007-12-12 11:36 ` 2.6.24-rc3-mm1 Jens Axboe
2007-12-14 9:00 ` 2.6.24-rc3-mm1 Hannes Reinecke
1 sibling, 2 replies; 128+ messages in thread
From: Boaz Harrosh @ 2007-12-12 10:08 UTC (permalink / raw)
To: James Bottomley, Jens Axboe
Cc: Andrew Morton, Gabriel C, linux-kernel, linux-scsi, Hannes Reinecke
On Tue, Dec 11 2007 at 18:33 +0200, James Bottomley <James.Bottomley@HansenPartnership.com> wrote:
> On Mon, 2007-11-26 at 22:15 -0800, Andrew Morton wrote:
>> OK, thanks. I'll assume that James and Hannes have this in hand (or will
>> have, by mid-week) and I won't do anything here.
>
> Just to confirm what I think I'm going to be doing: rebasing the
> scsi-misc tree to remove this commit:
>
> commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> Author: Hannes Reinecke <hare@suse.de>
> Date: Tue Nov 6 09:23:40 2007 +0100
>
> [SCSI] Do not requeue requests if REQ_FAILFAST is set
>
> And its allied fix ups:
>
> commit 983289045faa96fba8841d3c51b98bb8623d9504
> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> Date: Sat Nov 24 19:47:25 2007 +0200
>
> [SCSI] fix up REQ_FASTFAIL not to fail when state is QUIESCE
>
> commit 9dd15a13b332e9f5c8ee752b1ccd9b84cb5bdf17
> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> Date: Sat Nov 24 19:55:53 2007 +0200
>
> [SCSI] fix domain validation to work again
>
> James
>
The problems caused by this patch where nagging me at the back of my head
from the begging. Why should we fail on a check of FAIL_FAST in all kind
of weird places like boots, when the only place that should ever set the
flag should be one of the multi-path drivers. finally it struck me:
It might be a bug in ll_rw_blk at blk_rq_bio_prep() there is this:
static void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
struct bio *bio)
{
/* first two bits are identical in rq->cmd_flags and bio->bi_rw */
rq->cmd_flags |= (bio->bi_rw & 3);
...
Now this is no longer true and is a bug.
Second bit of bio->bi_rw defined in bio.h is:
#define BIO_RW_AHEAD 1
but
Second bit of rq->cmd_flags is __REQ_FAILFAST
so maybe we are getting FAILFAST in the wrong places?
(I will look for an old patch I sent a year ago that fixes
this bug)
Boaz
^ permalink raw reply [flat|nested] 128+ messages in thread
* [PATCH] REQ-flags to/from BIO-flags bugfix
2007-12-12 10:08 ` 2.6.24-rc3-mm1 Boaz Harrosh
@ 2007-12-12 11:03 ` Boaz Harrosh
2007-12-12 15:18 ` Matthew Wilcox
2007-12-12 11:36 ` 2.6.24-rc3-mm1 Jens Axboe
1 sibling, 1 reply; 128+ messages in thread
From: Boaz Harrosh @ 2007-12-12 11:03 UTC (permalink / raw)
To: James Bottomley, Jens Axboe
Cc: Andrew Morton, Gabriel C, linux-kernel, linux-scsi, Hannes Reinecke
- BIO flags bio->bi_rw and REQ flags req->cmd_flags no longer match.
Remove comments and do a proper translation between the 2 systems.
(Please look in ll_rw_blk.c/blk_rq_bio_prep() below if we need more flags)
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
---
block/ll_rw_blk.c | 23 +++++++++++++++++------
include/linux/blktrace_api.h | 8 +++++++-
2 files changed, 24 insertions(+), 7 deletions(-)
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 8b91994..c6a84bb 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -1990,10 +1990,6 @@ blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask)
if (!rq)
return NULL;
- /*
- * first three bits are identical in rq->cmd_flags and bio->bi_rw,
- * see bio.h and blkdev.h
- */
rq->cmd_flags = rw | REQ_ALLOCED;
if (priv) {
@@ -3772,8 +3768,23 @@ EXPORT_SYMBOL(end_request);
static void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
struct bio *bio)
{
- /* first two bits are identical in rq->cmd_flags and bio->bi_rw */
- rq->cmd_flags |= (bio->bi_rw & 3);
+ if (bio_data_dir(bio))
+ rq->cmd_flags |= REQ_RW;
+ else
+ rq->cmd_flags &= ~REQ_RW;
+
+ if (bio->bi_rw & (1<<BIO_RW_SYNC))
+ rq->cmd_flags |= REQ_RW_SYNC;
+ else
+ rq->cmd_flags &= ~REQ_RW_SYNC;
+ /* FIXME: what about other flags, should we sync these too? */
+ /*
+ BIO_RW_AHEAD ==> ??
+ BIO_RW_BARRIER ==> REQ_SOFTBARRIER/REQ_HARDBARRIER
+ BIO_RW_FAILFAST ==> REQ_FAILFAST
+ BIO_RW_SYNC ==> REQ_RW_SYNC
+ BIO_RW_META ==> REQ_RW_META
+ */
rq->nr_phys_segments = bio_phys_segments(q, bio);
rq->nr_hw_segments = bio_hw_segments(q, bio);
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 7e11d23..9e7ce65 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -165,7 +165,13 @@ static inline void blk_add_trace_rq(struct request_queue *q, struct request *rq,
u32 what)
{
struct blk_trace *bt = q->blk_trace;
- int rw = rq->cmd_flags & 0x03;
+ /* blktrace.c prints them according to bio flags */
+ int rw = (((rq_rw_dir(rq) == WRITE) << BIO_RW) |
+ (((rq->cmd_flags & (REQ_SOFTBARRIER|REQ_HARDBARRIER)) != 0) <<
+ BIO_RW_BARRIER) |
+ (((rq->cmd_flags & REQ_FAILFAST) != 0) << BIO_RW_FAILFAST) |
+ (((rq->cmd_flags & REQ_RW_SYNC) != 0) << BIO_RW_SYNC) |
+ (((rq->cmd_flags & REQ_RW_META) != 0) << BIO_RW_META));
if (likely(!bt))
return;
--
1.5.3.3
^ permalink raw reply related [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-12-12 10:08 ` 2.6.24-rc3-mm1 Boaz Harrosh
2007-12-12 11:03 ` [PATCH] REQ-flags to/from BIO-flags bugfix Boaz Harrosh
@ 2007-12-12 11:36 ` Jens Axboe
1 sibling, 0 replies; 128+ messages in thread
From: Jens Axboe @ 2007-12-12 11:36 UTC (permalink / raw)
To: Boaz Harrosh
Cc: James Bottomley, Andrew Morton, Gabriel C, linux-kernel,
linux-scsi, Hannes Reinecke
On Wed, Dec 12 2007, Boaz Harrosh wrote:
> On Tue, Dec 11 2007 at 18:33 +0200, James Bottomley <James.Bottomley@HansenPartnership.com> wrote:
> > On Mon, 2007-11-26 at 22:15 -0800, Andrew Morton wrote:
> >> OK, thanks. I'll assume that James and Hannes have this in hand (or will
> >> have, by mid-week) and I won't do anything here.
> >
> > Just to confirm what I think I'm going to be doing: rebasing the
> > scsi-misc tree to remove this commit:
> >
> > commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> > Author: Hannes Reinecke <hare@suse.de>
> > Date: Tue Nov 6 09:23:40 2007 +0100
> >
> > [SCSI] Do not requeue requests if REQ_FAILFAST is set
> >
> > And its allied fix ups:
> >
> > commit 983289045faa96fba8841d3c51b98bb8623d9504
> > Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> > Date: Sat Nov 24 19:47:25 2007 +0200
> >
> > [SCSI] fix up REQ_FASTFAIL not to fail when state is QUIESCE
> >
> > commit 9dd15a13b332e9f5c8ee752b1ccd9b84cb5bdf17
> > Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> > Date: Sat Nov 24 19:55:53 2007 +0200
> >
> > [SCSI] fix domain validation to work again
> >
> > James
> >
>
> The problems caused by this patch where nagging me at the back of my head
> from the begging. Why should we fail on a check of FAIL_FAST in all kind
> of weird places like boots, when the only place that should ever set the
> flag should be one of the multi-path drivers. finally it struck me:
>
> It might be a bug in ll_rw_blk at blk_rq_bio_prep() there is this:
>
> static void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
> struct bio *bio)
> {
> /* first two bits are identical in rq->cmd_flags and bio->bi_rw */
> rq->cmd_flags |= (bio->bi_rw & 3);
> ...
>
> Now this is no longer true and is a bug.
> Second bit of bio->bi_rw defined in bio.h is:
> #define BIO_RW_AHEAD 1
> but
> Second bit of rq->cmd_flags is __REQ_FAILFAST
>
> so maybe we are getting FAILFAST in the wrong places?
But that's actually on purpose, though the comment is pretty much crap.
We don't want to be retrying readahead requests, those should always
just be tossable.
--
Jens Axboe
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH] REQ-flags to/from BIO-flags bugfix
2007-12-12 11:03 ` [PATCH] REQ-flags to/from BIO-flags bugfix Boaz Harrosh
@ 2007-12-12 15:18 ` Matthew Wilcox
2007-12-12 15:54 ` Matthew Wilcox
2007-12-12 16:06 ` Boaz Harrosh
0 siblings, 2 replies; 128+ messages in thread
From: Matthew Wilcox @ 2007-12-12 15:18 UTC (permalink / raw)
To: Boaz Harrosh
Cc: James Bottomley, Jens Axboe, Andrew Morton, Gabriel C,
linux-kernel, linux-scsi, Hannes Reinecke
On Wed, Dec 12, 2007 at 01:03:10PM +0200, Boaz Harrosh wrote:
> - BIO flags bio->bi_rw and REQ flags req->cmd_flags no longer match.
> Remove comments and do a proper translation between the 2 systems.
I'd rather see them resynchronised ... in a way that makes it obvious
that they should be desynced again:
I don't know whether BIO_RW_BARRIER is __REQ_SOFTBARRIER or
__REQ_HARDBARRIER, so I didn't include that in this patch. There also
doesn't seem to be a __REQ equivalent to BIO_RW_AHEAD, but we can do
the other four bits (and leave gaps for those two).
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index d18ee67..6aef34b 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -167,11 +167,13 @@ enum {
};
/*
- * request type modified bits. first three bits match BIO_RW* bits, important
+ * request type modified bits. Don't change without looking at bi_rw flags
*/
enum rq_flag_bits {
- __REQ_RW, /* not set, read. set, write */
- __REQ_FAILFAST, /* no low level driver retries */
+ __REQ_RW = BIO_RW, /* not set, read. set, write */
+ __REQ_FAILFAST = BIO_RW_FAILFAST, /* no low level driver retries */
+ __REQ_RW_SYNC = BIO_RW_SYNC, /* request is sync (O_DIRECT) */
+ __REQ_RW_META = BIO_RW_META, /* metadata io request */
__REQ_SORTED, /* elevator knows about this request */
__REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
__REQ_HARDBARRIER, /* may not be passed by drive either */
@@ -185,9 +187,7 @@ enum rq_flag_bits {
__REQ_QUIET, /* don't worry about errors */
__REQ_PREEMPT, /* set for "ide_preempt" requests */
__REQ_ORDERED_COLOR, /* is before or after barrier */
- __REQ_RW_SYNC, /* request is sync (O_DIRECT) */
__REQ_ALLOCED, /* request came from our alloc pool */
- __REQ_RW_META, /* metadata io request */
__REQ_NR_BITS, /* stops here */
};
--
Intel are signing my paycheques ... these opinions are still mine
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply related [flat|nested] 128+ messages in thread
* Re: [PATCH] REQ-flags to/from BIO-flags bugfix
2007-12-12 15:18 ` Matthew Wilcox
@ 2007-12-12 15:54 ` Matthew Wilcox
2007-12-13 5:36 ` David Chinner
2007-12-12 16:06 ` Boaz Harrosh
1 sibling, 1 reply; 128+ messages in thread
From: Matthew Wilcox @ 2007-12-12 15:54 UTC (permalink / raw)
To: Boaz Harrosh
Cc: James Bottomley, Jens Axboe, Andrew Morton, Gabriel C,
linux-kernel, linux-scsi, Hannes Reinecke
On Wed, Dec 12, 2007 at 08:18:14AM -0700, Matthew Wilcox wrote:
> I don't know whether BIO_RW_BARRIER is __REQ_SOFTBARRIER or
> __REQ_HARDBARRIER, so I didn't include that in this patch. There also
> doesn't seem to be a __REQ equivalent to BIO_RW_AHEAD, but we can do
> the other four bits (and leave gaps for those two).
Hm. BIO_RW_AHEAD seems unused:
willy@honeydew:~/kernel/linux-2.6$ grep -r BIO_RW_AHEAD *
block/blktrace.c: (((rw) & (1 << BIO_RW_AHEAD)) << (2 - BIO_RW_AHEAD))
include/linux/bio.h:#define BIO_RW_AHEAD 1
include/linux/bio.h:#define bio_rw_ahead(bio) ((bio)->bi_rw & (1 << BIO_RW_AHEAD))
willy@honeydew:~/kernel/linux-2.6$ grep -r bio_rw_ahead *
block/ll_rw_blk.c: if (bio_rw_ahead(bio) || bio_failfast(bio))
drivers/md/dm-mpath.c: if ((error == -EWOULDBLOCK) && bio_rw_ahead(bio))
drivers/md/multipath.c: else if (!bio_rw_ahead(bio)) {
include/linux/bio.h:#define bio_rw_ahead(bio) ((bio)->bi_rw & (1 << BIO_RW_AHEAD))
BIO_RW_BARRIER seems to be __REQ_HARDBARRIER, but we set it
explicitly in init_request_from_bio(). We could probably simplify
init_request_from_bio() with the patch in the previous message.
--
Intel are signing my paycheques ... these opinions are still mine
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH] REQ-flags to/from BIO-flags bugfix
2007-12-12 15:18 ` Matthew Wilcox
2007-12-12 15:54 ` Matthew Wilcox
@ 2007-12-12 16:06 ` Boaz Harrosh
2007-12-12 16:33 ` Matthew Wilcox
1 sibling, 1 reply; 128+ messages in thread
From: Boaz Harrosh @ 2007-12-12 16:06 UTC (permalink / raw)
To: Matthew Wilcox
Cc: James Bottomley, Jens Axboe, Andrew Morton, Gabriel C,
linux-kernel, linux-scsi, Hannes Reinecke
On Wed, Dec 12 2007 at 17:18 +0200, Matthew Wilcox <matthew@wil.cx> wrote:
> On Wed, Dec 12, 2007 at 01:03:10PM +0200, Boaz Harrosh wrote:
>> - BIO flags bio->bi_rw and REQ flags req->cmd_flags no longer match.
>> Remove comments and do a proper translation between the 2 systems.
>
> I'd rather see them resynchronised ... in a way that makes it obvious
> that they should be desynced again:
>
> I don't know whether BIO_RW_BARRIER is __REQ_SOFTBARRIER or
> __REQ_HARDBARRIER, so I didn't include that in this patch. There also
> doesn't seem to be a __REQ equivalent to BIO_RW_AHEAD, but we can do
> the other four bits (and leave gaps for those two).
>
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index d18ee67..6aef34b 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -167,11 +167,13 @@ enum {
> };
>
> /*
> - * request type modified bits. first three bits match BIO_RW* bits, important
> + * request type modified bits. Don't change without looking at bi_rw flags
> */
> enum rq_flag_bits {
> - __REQ_RW, /* not set, read. set, write */
> - __REQ_FAILFAST, /* no low level driver retries */
> + __REQ_RW = BIO_RW, /* not set, read. set, write */
> + __REQ_FAILFAST = BIO_RW_FAILFAST, /* no low level driver retries */
> + __REQ_RW_SYNC = BIO_RW_SYNC, /* request is sync (O_DIRECT) */
> + __REQ_RW_META = BIO_RW_META, /* metadata io request */
> __REQ_SORTED, /* elevator knows about this request */
> __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */
> __REQ_HARDBARRIER, /* may not be passed by drive either */
> @@ -185,9 +187,7 @@ enum rq_flag_bits {
> __REQ_QUIET, /* don't worry about errors */
> __REQ_PREEMPT, /* set for "ide_preempt" requests */
> __REQ_ORDERED_COLOR, /* is before or after barrier */
> - __REQ_RW_SYNC, /* request is sync (O_DIRECT) */
> __REQ_ALLOCED, /* request came from our alloc pool */
> - __REQ_RW_META, /* metadata io request */
> __REQ_NR_BITS, /* stops here */
> };
>
>
Thats not enough You still need to fix code in ll_rw_blk(), I would
define a rq_flags_bio_match_mask = 0xf for that.
(and also add what Jens called "needed" with the
BIO_RW_AHEAD selects REQ_FAILFAST.)
And I still don't understand why, for example, "Domain Validation" fails
with the original patch. What sets BIO_RW_FAILFAST and than panics
on Errors?
(All I see is this flag set in dm/multipath.c & dm-mpath.c)
Boaz
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH] REQ-flags to/from BIO-flags bugfix
2007-12-12 16:06 ` Boaz Harrosh
@ 2007-12-12 16:33 ` Matthew Wilcox
0 siblings, 0 replies; 128+ messages in thread
From: Matthew Wilcox @ 2007-12-12 16:33 UTC (permalink / raw)
To: Boaz Harrosh
Cc: James Bottomley, Jens Axboe, Andrew Morton, Gabriel C,
linux-kernel, linux-scsi, Hannes Reinecke
On Wed, Dec 12, 2007 at 06:06:45PM +0200, Boaz Harrosh wrote:
> Thats not enough You still need to fix code in ll_rw_blk(), I would
> define a rq_flags_bio_match_mask = 0xf for that.
> (and also add what Jens called "needed" with the
> BIO_RW_AHEAD selects REQ_FAILFAST.)
Yes, I appreciate it's not enough; that's why I didn't sign-off on it.
Nobody currently sets BIO_RW_AHEAD, so I don't understand why we need to
do anything ;-)
> And I still don't understand why, for example, "Domain Validation" fails
> with the original patch. What sets BIO_RW_FAILFAST and than panics
> on Errors?
> (All I see is this flag set in dm/multipath.c & dm-mpath.c)
No idea ...
--
Intel are signing my paycheques ... these opinions are still mine
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [PATCH] REQ-flags to/from BIO-flags bugfix
2007-12-12 15:54 ` Matthew Wilcox
@ 2007-12-13 5:36 ` David Chinner
0 siblings, 0 replies; 128+ messages in thread
From: David Chinner @ 2007-12-13 5:36 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Boaz Harrosh, James Bottomley, Jens Axboe, Andrew Morton,
Gabriel C, linux-kernel, linux-scsi, Hannes Reinecke
On Wed, Dec 12, 2007 at 08:54:07AM -0700, Matthew Wilcox wrote:
> On Wed, Dec 12, 2007 at 08:18:14AM -0700, Matthew Wilcox wrote:
> > I don't know whether BIO_RW_BARRIER is __REQ_SOFTBARRIER or
> > __REQ_HARDBARRIER, so I didn't include that in this patch. There also
> > doesn't seem to be a __REQ equivalent to BIO_RW_AHEAD, but we can do
> > the other four bits (and leave gaps for those two).
>
> Hm. BIO_RW_AHEAD seems unused:
>
> willy@honeydew:~/kernel/linux-2.6$ grep -r BIO_RW_AHEAD *
> block/blktrace.c: (((rw) & (1 << BIO_RW_AHEAD)) << (2 - BIO_RW_AHEAD))
> include/linux/bio.h:#define BIO_RW_AHEAD 1
> include/linux/bio.h:#define bio_rw_ahead(bio) ((bio)->bi_rw & (1 << BIO_RW_AHEAD))
> willy@honeydew:~/kernel/linux-2.6$ grep -r bio_rw_ahead *
> block/ll_rw_blk.c: if (bio_rw_ahead(bio) || bio_failfast(bio))
> drivers/md/dm-mpath.c: if ((error == -EWOULDBLOCK) && bio_rw_ahead(bio))
> drivers/md/multipath.c: else if (!bio_rw_ahead(bio)) {
> include/linux/bio.h:#define bio_rw_ahead(bio) ((bio)->bi_rw & (1 << BIO_RW_AHEAD))
That would say to me that READA is not hooked up correctly. i.e:
#define READ 0
#define WRITE 1
#define READA 2 /* read-ahead - don't block if no resources */
#define SWRITE 3 /* for ll_rw_block() - wait for buffer lock */
#define READ_SYNC (READ | (1 << BIO_RW_SYNC))
#define READ_META (READ | (1 << BIO_RW_META))
#define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNC))
#define WRITE_BARRIER ((1 << BIO_RW) | (1 << BIO_RW_BARRIER))
i.e. it should be:
#define READA (1 << BIO_RW_AHEAD)
Right?
FWIW, dm does this:
if (bio_rw(bio) != READA)
Which really should be if (bio_rw_ahead(bio)).....
Cheers,
Dave.
--
Dave Chinner
Principal Engineer
SGI Australian Software Group
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-12-11 16:33 ` 2.6.24-rc3-mm1 James Bottomley
2007-12-12 10:08 ` 2.6.24-rc3-mm1 Boaz Harrosh
@ 2007-12-14 9:00 ` Hannes Reinecke
2007-12-14 14:26 ` 2.6.24-rc3-mm1 James Bottomley
1 sibling, 1 reply; 128+ messages in thread
From: Hannes Reinecke @ 2007-12-14 9:00 UTC (permalink / raw)
To: James Bottomley; +Cc: Andrew Morton, Gabriel C, linux-kernel, linux-scsi
James Bottomley wrote:
> On Mon, 2007-11-26 at 22:15 -0800, Andrew Morton wrote:
>> OK, thanks. I'll assume that James and Hannes have this in hand (or will
>> have, by mid-week) and I won't do anything here.
>
> Just to confirm what I think I'm going to be doing: rebasing the
> scsi-misc tree to remove this commit:
>
> commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> Author: Hannes Reinecke <hare@suse.de>
> Date: Tue Nov 6 09:23:40 2007 +0100
>
> [SCSI] Do not requeue requests if REQ_FAILFAST is set
>
> And its allied fix ups:
>
> commit 983289045faa96fba8841d3c51b98bb8623d9504
> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> Date: Sat Nov 24 19:47:25 2007 +0200
>
> [SCSI] fix up REQ_FASTFAIL not to fail when state is QUIESCE
>
> commit 9dd15a13b332e9f5c8ee752b1ccd9b84cb5bdf17
> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> Date: Sat Nov 24 19:55:53 2007 +0200
>
> [SCSI] fix domain validation to work again
>
> James
>
>
Or just apply my latest patch (cf Undo __scsi_kill_request).
The main point is that we shouldn't retry requests
with FAILFAST set when the queue is blocked. AFAICS
only FC and iSCSI transports set the queue to blocked,
and use this to indicate a loss of connection. So any
retry with queue blocked is futile.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: 2.6.24-rc3-mm1
2007-12-14 9:00 ` 2.6.24-rc3-mm1 Hannes Reinecke
@ 2007-12-14 14:26 ` James Bottomley
2008-01-07 14:05 ` Multipath failover handling (Was: Re: 2.6.24-rc3-mm1) Hannes Reinecke
0 siblings, 1 reply; 128+ messages in thread
From: James Bottomley @ 2007-12-14 14:26 UTC (permalink / raw)
To: Hannes Reinecke; +Cc: Andrew Morton, Gabriel C, linux-kernel, linux-scsi
On Fri, 2007-12-14 at 10:00 +0100, Hannes Reinecke wrote:
> James Bottomley wrote:
> > On Mon, 2007-11-26 at 22:15 -0800, Andrew Morton wrote:
> >> OK, thanks. I'll assume that James and Hannes have this in hand (or will
> >> have, by mid-week) and I won't do anything here.
> >
> > Just to confirm what I think I'm going to be doing: rebasing the
> > scsi-misc tree to remove this commit:
> >
> > commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> > Author: Hannes Reinecke <hare@suse.de>
> > Date: Tue Nov 6 09:23:40 2007 +0100
> >
> > [SCSI] Do not requeue requests if REQ_FAILFAST is set
> >
> > And its allied fix ups:
> >
> > commit 983289045faa96fba8841d3c51b98bb8623d9504
> > Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> > Date: Sat Nov 24 19:47:25 2007 +0200
> >
> > [SCSI] fix up REQ_FASTFAIL not to fail when state is QUIESCE
> >
> > commit 9dd15a13b332e9f5c8ee752b1ccd9b84cb5bdf17
> > Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> > Date: Sat Nov 24 19:55:53 2007 +0200
> >
> > [SCSI] fix domain validation to work again
> >
> > James
> >
> >
> Or just apply my latest patch (cf Undo __scsi_kill_request).
> The main point is that we shouldn't retry requests
> with FAILFAST set when the queue is blocked. AFAICS
> only FC and iSCSI transports set the queue to blocked,
> and use this to indicate a loss of connection. So any
> retry with queue blocked is futile.
I still don't think this is the right approach.
For link up/down events, those are direct pathing events and should be
signalled along a kernel notifier, not by mucking with the SCSI state
machine. However, there's still devloss_tmo to consider ... even in
multipath, I don't think you want to signal path failure until
devloss_tmo has fired otherwise you'll get too many transient up/down
events which damage performance if the array has an expensive failover
model.
The other problem is what to do with in-flight commands at the time the
link went down. With your current patch, they're still stuck until they
time out ... surely there needs to be some type of recovery mechanism
for these?
James
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: [linux-usb-devel] 2.6.24-rc3-mm1: usb mouse doesn't work
2007-11-23 5:19 ` Kirill A. Shutemov
2007-11-23 16:21 ` Alan Stern
@ 2007-12-31 21:06 ` Alan Stern
1 sibling, 0 replies; 128+ messages in thread
From: Alan Stern @ 2007-12-31 21:06 UTC (permalink / raw)
To: Kirill A. Shutemov
Cc: Marin Mitov, Kernel development list, USB development list
On Fri, 23 Nov 2007, Kirill A. Shutemov wrote:
> On [Thu, 22.11.2007 21:51], Alan Stern wrote:
> > On Thu, 22 Nov 2007, Marin Mitov wrote:
> >
> > > > > > I've had some strangenesses with USB lately. Sometimes running `lsusb'
> > > > > > makes the USB system notice a newly attached device.
> > > > >
> > > > > No. But I have new messages in dmesg:
> > > > >
> > > > > uhci_hcd 0000:00:1d.3: FGR not stopped yet!
> > > > > uhci_hcd 0000:00:1d.2: FGR not stopped yet!
> > > > > uhci_hcd 0000:00:1d.1: FGR not stopped yet!
> > > > > uhci_hcd 0000:00:1d.0: FGR not stopped yet!
> > > > >
> > > > > > Is that "FGR not stopped yet!" messgae new behaviour?
> > > > >
> > > > > It is a new message since 2.6.24-rc3. I have never try -mm tree before.
> > > >
> > > > These messages could indicate a timing problem. You can see the code
> > > > that writes the messages near the end of wakeup_rh() in
> > > > drivers/usb/host/uhci-hcd.c.
> > > >
> > > > The message gets written if the controller hardware hasn't turned off a
> > > > particular bit after a 4-us delay. If the udelay() function wasn't
> > > > working right, it could cause this problem.
> > >
> > > udelay() _is_ OK for 2.6.24-rc3, so it is not the cause of the problem
> >
> > But is it OK for 2.6.24-rc3-mm1? Kirill said specifically that
> > 2.6.24-rc3 does not display the message but 2.6.24-rc3-mm1 does.
>
> How can I test it?
Any progress? How about more recent kernels?
Alan Stern
^ permalink raw reply [flat|nested] 128+ messages in thread
* Multipath failover handling (Was: Re: 2.6.24-rc3-mm1)
2007-12-14 14:26 ` 2.6.24-rc3-mm1 James Bottomley
@ 2008-01-07 14:05 ` Hannes Reinecke
2008-01-07 17:57 ` James Bottomley
0 siblings, 1 reply; 128+ messages in thread
From: Hannes Reinecke @ 2008-01-07 14:05 UTC (permalink / raw)
To: James Bottomley; +Cc: Andrew Morton, Gabriel C, linux-kernel, linux-scsi
James Bottomley wrote:
> On Fri, 2007-12-14 at 10:00 +0100, Hannes Reinecke wrote:
>> James Bottomley wrote:
>>> On Mon, 2007-11-26 at 22:15 -0800, Andrew Morton wrote:
>>>> OK, thanks. I'll assume that James and Hannes have this in hand (or will
>>>> have, by mid-week) and I won't do anything here.
>>> Just to confirm what I think I'm going to be doing: rebasing the
>>> scsi-misc tree to remove this commit:
>>>
>>> commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
>>> Author: Hannes Reinecke <hare@suse.de>
>>> Date: Tue Nov 6 09:23:40 2007 +0100
>>>
>>> [SCSI] Do not requeue requests if REQ_FAILFAST is set
>>>
>>> And its allied fix ups:
>>>
>>> commit 983289045faa96fba8841d3c51b98bb8623d9504
>>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
>>> Date: Sat Nov 24 19:47:25 2007 +0200
>>>
>>> [SCSI] fix up REQ_FASTFAIL not to fail when state is QUIESCE
>>>
>>> commit 9dd15a13b332e9f5c8ee752b1ccd9b84cb5bdf17
>>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
>>> Date: Sat Nov 24 19:55:53 2007 +0200
>>>
>>> [SCSI] fix domain validation to work again
>>>
>>> James
>>>
>>>
>> Or just apply my latest patch (cf Undo __scsi_kill_request).
>> The main point is that we shouldn't retry requests
>> with FAILFAST set when the queue is blocked. AFAICS
>> only FC and iSCSI transports set the queue to blocked,
>> and use this to indicate a loss of connection. So any
>> retry with queue blocked is futile.
>
> I still don't think this is the right approach.
>
> For link up/down events, those are direct pathing events and should be
> signalled along a kernel notifier, not by mucking with the SCSI state
> machine.
Of course they will be signalled. And eventually we should patch up
mutltipath-tools to read the exising events from the uevent socket.
But even with that patch there is a quite largish window during
which IOs will be sent to the blocked device, and hence will be
stuck in the request queue until the timer expires.
> However, there's still devloss_tmo to consider ... even in
> multipath, I don't think you want to signal path failure until
> devloss_tmo has fired otherwise you'll get too many transient up/down
> events which damage performance if the array has an expensive failover
> model.
>
Yes. But currently we have a very high failover latency as we always have
to wait for the requeued commands to time-out.
Hence we're damaging performance on arrays with inexpensive failover.
> The other problem is what to do with in-flight commands at the time the
> link went down. With your current patch, they're still stuck until they
> time out ... surely there needs to be some type of recovery mechanism
> for these?
>
Well, the in-flight commands are owned by the HBA driver, which should
have the proper code to terminate / return those commands with the
appriopriate codes. They will then be rescheduled and will be caught
like 'normal' IO requests.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: Multipath failover handling (Was: Re: 2.6.24-rc3-mm1)
2008-01-07 14:05 ` Multipath failover handling (Was: Re: 2.6.24-rc3-mm1) Hannes Reinecke
@ 2008-01-07 17:57 ` James Bottomley
2008-01-07 18:24 ` Mike Christie
0 siblings, 1 reply; 128+ messages in thread
From: James Bottomley @ 2008-01-07 17:57 UTC (permalink / raw)
To: Hannes Reinecke; +Cc: Andrew Morton, Gabriel C, linux-kernel, linux-scsi
On Mon, 2008-01-07 at 15:05 +0100, Hannes Reinecke wrote:
> James Bottomley wrote:
> > On Fri, 2007-12-14 at 10:00 +0100, Hannes Reinecke wrote:
> >> James Bottomley wrote:
> >>> On Mon, 2007-11-26 at 22:15 -0800, Andrew Morton wrote:
> >>>> OK, thanks. I'll assume that James and Hannes have this in hand (or will
> >>>> have, by mid-week) and I won't do anything here.
> >>> Just to confirm what I think I'm going to be doing: rebasing the
> >>> scsi-misc tree to remove this commit:
> >>>
> >>> commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> >>> Author: Hannes Reinecke <hare@suse.de>
> >>> Date: Tue Nov 6 09:23:40 2007 +0100
> >>>
> >>> [SCSI] Do not requeue requests if REQ_FAILFAST is set
> >>>
> >>> And its allied fix ups:
> >>>
> >>> commit 983289045faa96fba8841d3c51b98bb8623d9504
> >>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> >>> Date: Sat Nov 24 19:47:25 2007 +0200
> >>>
> >>> [SCSI] fix up REQ_FASTFAIL not to fail when state is QUIESCE
> >>>
> >>> commit 9dd15a13b332e9f5c8ee752b1ccd9b84cb5bdf17
> >>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> >>> Date: Sat Nov 24 19:55:53 2007 +0200
> >>>
> >>> [SCSI] fix domain validation to work again
> >>>
> >>> James
> >>>
> >>>
> >> Or just apply my latest patch (cf Undo __scsi_kill_request).
> >> The main point is that we shouldn't retry requests
> >> with FAILFAST set when the queue is blocked. AFAICS
> >> only FC and iSCSI transports set the queue to blocked,
> >> and use this to indicate a loss of connection. So any
> >> retry with queue blocked is futile.
> >
> > I still don't think this is the right approach.
> >
> > For link up/down events, those are direct pathing events and should be
> > signalled along a kernel notifier, not by mucking with the SCSI state
> > machine.
> Of course they will be signalled. And eventually we should patch up
> mutltipath-tools to read the exising events from the uevent socket.
> But even with that patch there is a quite largish window during
> which IOs will be sent to the blocked device, and hence will be
> stuck in the request queue until the timer expires.
But the assumption your code makes is that if REQ_FAILFAST is set then
it's a dm request ... and that's not true. The code in question
negatively impacts other users of REQ_FAILFAST. For every user other
than dm, the right thing to do is to wait out the block.
> > However, there's still devloss_tmo to consider ... even in
> > multipath, I don't think you want to signal path failure until
> > devloss_tmo has fired otherwise you'll get too many transient up/down
> > events which damage performance if the array has an expensive failover
> > model.
> >
> Yes. But currently we have a very high failover latency as we always have
> to wait for the requeued commands to time-out.
> Hence we're damaging performance on arrays with inexpensive failover.
If it's a either/or choice between the two that's showing our current
approach to multi-path is broken.
> > The other problem is what to do with in-flight commands at the time the
> > link went down. With your current patch, they're still stuck until they
> > time out ... surely there needs to be some type of recovery mechanism
> > for these?
> >
> Well, the in-flight commands are owned by the HBA driver, which should
> have the proper code to terminate / return those commands with the
> appriopriate codes. They will then be rescheduled and will be caught
> like 'normal' IO requests.
But my point is that if a driver goes blocked, those commands will be
forced to wait the blocked timeout anyway, so your proposed patch does
nothing to improve the case for dm anyway ... you only avoid commands
stuck when a device goes blocked if by chance its request queue was
empty.
James
^ permalink raw reply [flat|nested] 128+ messages in thread
* Re: Multipath failover handling (Was: Re: 2.6.24-rc3-mm1)
2008-01-07 17:57 ` James Bottomley
@ 2008-01-07 18:24 ` Mike Christie
0 siblings, 0 replies; 128+ messages in thread
From: Mike Christie @ 2008-01-07 18:24 UTC (permalink / raw)
To: James Bottomley
Cc: Hannes Reinecke, Andrew Morton, Gabriel C, linux-kernel, linux-scsi
James Bottomley wrote:
>>> However, there's still devloss_tmo to consider ... even in
>>> multipath, I don't think you want to signal path failure until
>>> devloss_tmo has fired otherwise you'll get too many transient up/down
>>> events which damage performance if the array has an expensive failover
>>> model.
>>>
>> Yes. But currently we have a very high failover latency as we always have
>> to wait for the requeued commands to time-out.
>> Hence we're damaging performance on arrays with inexpensive failover.
>
> If it's a either/or choice between the two that's showing our current
> approach to multi-path is broken.
>
>>> The other problem is what to do with in-flight commands at the time the
>>> link went down. With your current patch, they're still stuck until they
>>> time out ... surely there needs to be some type of recovery mechanism
>>> for these?
>>>
>> Well, the in-flight commands are owned by the HBA driver, which should
>> have the proper code to terminate / return those commands with the
>> appriopriate codes. They will then be rescheduled and will be caught
>> like 'normal' IO requests.
>
> But my point is that if a driver goes blocked, those commands will be
> forced to wait the blocked timeout anyway, so your proposed patch does
> nothing to improve the case for dm anyway ... you only avoid commands
> stuck when a device goes blocked if by chance its request queue was
> empty.
How about my patches to use new transport error values and make the
iscsi and fc behave the same.
The problem I think Hannes and I are both trying to solve is this:
1. We do not want to wait for dev_loss_tmo seconds for failover.
2. The FC drivers can hook into fast_io_fail_tmo related callouts and
with that set that tmo to a very low value like a couple of seconds if
they are using multipath, so failovers are fast. However, there is a bug
with where when the fast_io_fail_tmo fires requests that made it to the
driver get failed and returned to the multipath layer, but commands in
the blocked request queue are stuck in there until dev_loss_tmo fires.
With my patches here (need to be rediffed and for FC I need to handle
JamesS's comments about not using a new field for the fast_fail_timeout
state bit):
http://marc.info/?l=linux-scsi&m=117399843216280&w=2
http://marc.info/?l=linux-scsi&m=117399544112073&w=2
http://marc.info/?l=linux-scsi&m=117399844316771&w=2
http://marc.info/?l=linux-scsi&m=117400203324693&w=2
http://marc.info/?l=linux-scsi&m=117400203324690&w=2
For FC we can use the fast_io_fail_tmo for fast failovers, and commands
will not get stuck in a blocked queue for dev_loss_tmo seconds because
when the fast_io_fail_tmo fires the target's queues are unblocked and
fc_remote_port_chkready() ready kicks in (iSCSI does the same with the
patches in the links). And with the patches if multipath-tools is
sending its path testing IO it will get a DID_TRANSPORT_* error code
that it can use to make a decent path failing decision with.
^ permalink raw reply [flat|nested] 128+ messages in thread
end of thread, other threads:[~2008-01-07 18:25 UTC | newest]
Thread overview: 128+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-11-21 4:45 2.6.24-rc3-mm1 Andrew Morton
2007-11-21 5:51 ` 2.6.24-rc3-mm1 Dave Young
2007-11-21 6:00 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-21 6:03 ` 2.6.24-rc3-mm1 Dave Young
2007-11-21 6:15 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-21 6:22 ` 2.6.24-rc3-mm1 Dave Young
2007-11-21 18:35 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
2007-11-21 22:25 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-26 18:48 ` 2.6.24-rc3-mm1 Rik van Riel
2007-11-26 19:33 ` 2.6.24-rc3-mm1 Jiri Slaby
2007-11-21 5:56 ` 2.6.24-rc3-mm1 - Build Failure on S390x Kamalesh Babulal
2007-11-21 6:04 ` Andrew Morton
2007-11-21 5:58 ` 2.6.24-rc3-mm1 KAMEZAWA Hiroyuki
2007-11-21 6:08 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-21 12:49 ` 2.6.24-rc3-mm1 Rene Herman
2007-11-21 6:11 ` 2.6.24-rc3-mm1 - Kernel Panic on IO-APIC Kamalesh Babulal
2007-11-21 6:18 ` Andrew Morton
2007-11-21 9:22 ` Kamalesh Babulal
2007-11-21 9:29 ` Andrew Morton
2007-11-21 9:43 ` Kamalesh Babulal
2007-11-21 19:33 ` Torsten Kaiser
2007-11-22 10:04 ` Kirill A. Shutemov
2007-11-21 19:22 ` Len Brown
2007-11-21 19:48 ` Torsten Kaiser
2007-11-24 0:49 ` Alexey Dobriyan
2007-11-26 19:39 ` Rik van Riel
2007-11-26 20:33 ` Andrew Morton
2007-11-26 20:45 ` Ingo Molnar
2007-11-26 22:08 ` Jiri Slaby
2007-11-26 22:17 ` Andrew Morton
2007-11-26 22:22 ` Jiri Slaby
2007-11-26 23:14 ` Jiri Slaby
2007-11-26 23:28 ` Andrew Morton
2007-11-27 17:50 ` Rik van Riel
2007-11-26 20:54 ` Rik van Riel
2007-11-26 20:56 ` Christoph Lameter
2007-11-21 8:06 ` 2.6.24-rc3-mm1- powerpc link failure Kamalesh Babulal
2007-11-21 22:52 ` Stephen Rothwell
2007-11-21 8:24 ` 2.6.24-rc3-mm1 make headers_check fails Kamalesh Babulal
2007-11-21 0:32 ` Andrew Morton
2007-11-21 8:41 ` Kamalesh Babulal
2007-11-21 8:44 ` Avi Kivity
2007-11-21 8:52 ` Robert P. J. Day
2007-11-21 9:04 ` Andrew Morton
2007-11-21 9:06 ` Robert P. J. Day
2007-11-21 9:58 ` Sam Ravnborg
2007-11-21 10:00 ` Avi Kivity
2007-11-21 10:17 ` Avi Kivity
2007-11-21 10:31 ` Robert P. J. Day
2007-11-28 5:02 ` Andrew Morton
2007-12-02 8:56 ` Avi Kivity
2007-11-24 14:34 ` Adrian Bunk
2007-11-21 8:42 ` 2.6.24-rc3-mm1 (sync is slow ?) KAMEZAWA Hiroyuki
2007-11-21 8:49 ` Andrew Morton
2007-11-22 3:06 ` KAMEZAWA Hiroyuki
2007-11-24 12:04 ` kosaki
2007-11-24 18:04 ` Gabriel C
2007-11-26 7:06 ` KAMEZAWA Hiroyuki
2007-11-21 8:49 ` KAMEZAWA Hiroyuki
2007-11-21 18:23 ` 2.6.24-rc3-mm1: usb mouse doesn't work Kirill A. Shutemov
2007-11-21 22:22 ` Andrew Morton
2007-11-22 10:17 ` Kirill A. Shutemov
2007-11-22 17:07 ` [linux-usb-devel] " Alan Stern
2007-11-22 17:41 ` Marin Mitov
2007-11-23 2:51 ` Alan Stern
2007-11-23 5:19 ` Kirill A. Shutemov
2007-11-23 16:21 ` Alan Stern
2007-12-31 21:06 ` Alan Stern
2007-11-21 21:45 ` 2.6.24-rc3-mm1: I/O error, system hangs Laurent Riffard
2007-11-21 22:41 ` Andrew Morton
2007-11-23 7:29 ` Laurent Riffard
2007-11-23 7:51 ` Hannes Reinecke
2007-11-23 11:38 ` Hannes Reinecke
2007-11-23 17:52 ` Laurent Riffard
2007-11-24 6:42 ` James Bottomley
2007-11-24 12:57 ` Laurent Riffard
2007-11-24 13:26 ` James Bottomley
2007-11-24 17:54 ` Gabriel C
2007-11-24 18:04 ` James Bottomley
2007-11-24 18:08 ` Gabriel C
2007-11-24 18:28 ` Gabriel C
2007-11-24 22:59 ` Laurent Riffard
2007-11-25 7:37 ` James Bottomley
2007-11-25 20:39 ` Laurent Riffard
2007-11-28 21:38 ` Laurent Riffard
2007-11-24 17:44 ` James Bottomley
2007-11-26 7:54 ` Hannes Reinecke
2007-11-22 10:22 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
2007-11-23 0:18 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-23 0:48 ` 2.6.24-rc3-mm1 Thomas Gleixner
2007-11-23 6:05 ` 2.6.24-rc3-mm1 Kirill A. Shutemov
2007-11-23 8:59 ` 2.6.24-rc3-mm1 Andreas Herrmann
2007-11-23 1:39 ` 2.6.24-rc3-mm1 Gabriel C
2007-11-23 4:12 ` 2.6.24-rc3-mm1 Andrew Morton
2007-11-23 5:55 ` 2.6.24-rc3-mm1 Gabriel C
2007-11-27 6:15 ` 2.6.24-rc3-mm1 Andrew Morton
2007-12-11 16:33 ` 2.6.24-rc3-mm1 James Bottomley
2007-12-12 10:08 ` 2.6.24-rc3-mm1 Boaz Harrosh
2007-12-12 11:03 ` [PATCH] REQ-flags to/from BIO-flags bugfix Boaz Harrosh
2007-12-12 15:18 ` Matthew Wilcox
2007-12-12 15:54 ` Matthew Wilcox
2007-12-13 5:36 ` David Chinner
2007-12-12 16:06 ` Boaz Harrosh
2007-12-12 16:33 ` Matthew Wilcox
2007-12-12 11:36 ` 2.6.24-rc3-mm1 Jens Axboe
2007-12-14 9:00 ` 2.6.24-rc3-mm1 Hannes Reinecke
2007-12-14 14:26 ` 2.6.24-rc3-mm1 James Bottomley
2008-01-07 14:05 ` Multipath failover handling (Was: Re: 2.6.24-rc3-mm1) Hannes Reinecke
2008-01-07 17:57 ` James Bottomley
2008-01-07 18:24 ` Mike Christie
2007-11-26 19:13 ` 2.6.24-rc3-mm1 Randy Dunlap
2007-11-26 19:34 ` 2.6.24-rc3-mm1 Christoph Lameter
2007-11-26 20:40 ` 2.6.24-rc3-mm1 Randy Dunlap
2007-11-26 20:56 ` 2.6.24-rc3-mm1 Christoph Lameter
2007-11-26 20:47 ` [PATCH -mm] x86 allnoconfig memory model Randy Dunlap
2007-11-26 21:00 ` Christoph Lameter
2007-11-26 21:17 ` Randy Dunlap
2007-11-26 21:20 ` Andrew Morton
2007-11-26 21:52 ` Christoph Lameter
2007-11-26 21:57 ` Andrew Morton
2007-11-26 23:19 ` Christoph Lameter
2007-11-27 7:16 ` 2.6.24-rc3-mm1 - brick my Dell Latitude D820 Valdis.Kletnieks
2007-11-27 7:27 ` Andrew Morton
2007-11-27 7:54 ` Valdis.Kletnieks
2007-11-27 8:17 ` Andrew Morton
2007-11-27 10:25 ` Ingo Molnar
2007-11-27 8:25 ` Dave Young
2007-11-27 8:46 ` Valdis.Kletnieks
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).