[PATCH 0 of 7] x86: lay groundwork for Xen domain 0 support

[PATCH 0 of 7] x86: lay groundwork for Xen domain 0 support

[Jeremy Fitzhardinge]

Hi Ingo,

This series begins to lay the groundwork for Xen domain 0 support.
Domain 0 is much like a normal Xen domain, but it is also allowed to
have direct access to the underlying hardware (including both IO space
and various BIOS tables), so it can run device drivers, etc.  This
means that we need to be able to distinguish between a Xen domain's
normal pseudo-physical address space, and the real machine physical
address space.

This series:
 - Adds a new pte flag - _PAGE_IOMAP - used to indicate that a mapping
   is intended to map an IO device, and the physical address is
   actually a real machine physical address rather than a
   pseudo-physical address.  This is exposed as PAGE_KERNEL_IO and so
   on.  ioremap() and early_ioremap() are modified to set this flag,
   as they (should) always be used to map IO devices and not other
   memory.  By default __supported_pte_mask masks this flag out, so it
   won't end up in the final pagetable.  The Xen (and any other) code
   which cares about this flag unmask it from __supported_pte_mask.

 - Add early_memremap() to deal with the cases where early_ioremap()
   actually being used to map normal memory.

 - Remove a bogus check in x86-64's implementation of
   set_pte_vaddr_pud(), which prevents memory mappings from being
   updated.

 - Convert __acpi_map_table to use early_ioremap(), rather than have
   its own implementation.

 - Make __acpi_map_table always map the memory rather than assuming
   that the linear map maps some of the acpi tables.  This won't be
   true in the virtual case, and always mapping doesn't hurt in the
   native case.

I've tested these patches on both 32 and 64 native booting, and it all
works for me.

Thanks,
	J

[PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Jeremy Fitzhardinge]

Use one of the software-defined PTE bits to indicate that a mapping is
intended for an IO address.  On native hardware this is irrelevent,
since a physical address is a physical address.  But in a virtual
environment, physical addresses are also virtualized, so there needs
to be some way to distinguish between pseudo-physical addresses and
actual hardware addresses; _PAGE_IOMAP indicates this intent.

By default, __supported_pte_mask masks out _PAGE_IOMAP, so it doesn't
even appear in the final pagetable.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/init_32.c     |    2 +-
 arch/x86/mm/init_64.c     |    2 +-
 arch/x86/mm/ioremap.c     |    8 ++++----
 include/asm-x86/fixmap.h  |    2 +-
 include/asm-x86/pgtable.h |   14 ++++++++++++--
 5 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -503,7 +503,7 @@
 
 int nx_enabled;
 
-pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL);
+pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL | _PAGE_IOMAP);
 EXPORT_SYMBOL_GPL(__supported_pte_mask);
 
 #ifdef CONFIG_X86_PAE
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -88,7 +88,7 @@
 
 int after_bootmem;
 
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
+pteval_t __supported_pte_mask __read_mostly = ~_PAGE_IOMAP;
 EXPORT_SYMBOL_GPL(__supported_pte_mask);
 
 static int do_not_nx __cpuinitdata;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -223,16 +223,16 @@
 	switch (prot_val) {
 	case _PAGE_CACHE_UC:
 	default:
-		prot = PAGE_KERNEL_NOCACHE;
+		prot = PAGE_KERNEL_IO_NOCACHE;
 		break;
 	case _PAGE_CACHE_UC_MINUS:
-		prot = PAGE_KERNEL_UC_MINUS;
+		prot = PAGE_KERNEL_IO_UC_MINUS;
 		break;
 	case _PAGE_CACHE_WC:
-		prot = PAGE_KERNEL_WC;
+		prot = PAGE_KERNEL_IO_WC;
 		break;
 	case _PAGE_CACHE_WB:
-		prot = PAGE_KERNEL;
+		prot = PAGE_KERNEL_IO;
 		break;
 	}
 
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -15,7 +15,7 @@
 #define _PAGE_BIT_PAT		7	/* on 4KB pages */
 #define _PAGE_BIT_GLOBAL	8	/* Global TLB entry PPro+ */
 #define _PAGE_BIT_UNUSED1	9	/* available for programmer */
-#define _PAGE_BIT_UNUSED2	10
+#define _PAGE_BIT_IOMAP		10	/* flag used to indicate IO mapping */
 #define _PAGE_BIT_HIDDEN	11	/* hidden by kmemcheck */
 #define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
 #define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
@@ -32,7 +32,7 @@
 #define _PAGE_PSE	(_AT(pteval_t, 1) << _PAGE_BIT_PSE)
 #define _PAGE_GLOBAL	(_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
 #define _PAGE_UNUSED1	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
-#define _PAGE_UNUSED2	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED2)
+#define _PAGE_IOMAP	(_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
 #define _PAGE_HIDDEN	(_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
 #define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
 #define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
@@ -99,6 +99,11 @@
 #define __PAGE_KERNEL_LARGE_NOCACHE	(__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
 #define __PAGE_KERNEL_LARGE_EXEC	(__PAGE_KERNEL_EXEC | _PAGE_PSE)
 
+#define __PAGE_KERNEL_IO		(__PAGE_KERNEL | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_NOCACHE	(__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_UC_MINUS	(__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_WC		(__PAGE_KERNEL_WC | _PAGE_IOMAP)
+
 #define PAGE_KERNEL			__pgprot(__PAGE_KERNEL)
 #define PAGE_KERNEL_RO			__pgprot(__PAGE_KERNEL_RO)
 #define PAGE_KERNEL_EXEC		__pgprot(__PAGE_KERNEL_EXEC)
@@ -112,6 +117,11 @@
 #define PAGE_KERNEL_LARGE_EXEC		__pgprot(__PAGE_KERNEL_LARGE_EXEC)
 #define PAGE_KERNEL_VSYSCALL		__pgprot(__PAGE_KERNEL_VSYSCALL)
 #define PAGE_KERNEL_VSYSCALL_NOCACHE	__pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
+
+#define PAGE_KERNEL_IO			__pgprot(__PAGE_KERNEL_IO)
+#define PAGE_KERNEL_IO_NOCACHE		__pgprot(__PAGE_KERNEL_IO_NOCACHE)
+#define PAGE_KERNEL_IO_UC_MINUS		__pgprot(__PAGE_KERNEL_IO_UC_MINUS)
+#define PAGE_KERNEL_IO_WC		__pgprot(__PAGE_KERNEL_IO_WC)
 
 /*         xwr */
 #define __P000	PAGE_NONE

Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Avi Kivity]

Jeremy Fitzhardinge wrote:
> Use one of the software-defined PTE bits to indicate that a mapping is
> intended for an IO address.  On native hardware this is irrelevent,
> since a physical address is a physical address.  But in a virtual
> environment, physical addresses are also virtualized, so there needs
> to be some way to distinguish between pseudo-physical addresses and
> actual hardware addresses; _PAGE_IOMAP indicates this intent.
>
> By default, __supported_pte_mask masks out _PAGE_IOMAP, so it doesn't
> even appear in the final pagetable.
>   

Could PTE_SPECIAL, added for get_user_pages_really_fast(), be reused for 
this?

-- 
error compiling committee.c: too many arguments to function

Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Jeremy Fitzhardinge]

Avi Kivity wrote:
> Jeremy Fitzhardinge wrote:
>> Use one of the software-defined PTE bits to indicate that a mapping is
>> intended for an IO address.  On native hardware this is irrelevent,
>> since a physical address is a physical address.  But in a virtual
>> environment, physical addresses are also virtualized, so there needs
>> to be some way to distinguish between pseudo-physical addresses and
>> actual hardware addresses; _PAGE_IOMAP indicates this intent.
>>
>> By default, __supported_pte_mask masks out _PAGE_IOMAP, so it doesn't
>> even appear in the final pagetable.
>>   
>
> Could PTE_SPECIAL, added for get_user_pages_really_fast(), be reused
> for this?
>

I'm not sure; I still don't really understand how _PAGE_SPECIAL gets
used, other than being user-mode mapping only.  But in principle,
_PAGE_IOMAP could be set on both kernel and user mappings (if you direct
map a device into a process address space), so I think they would
conflict then?

Also, _PAGE_SPECIAL is also shared with _PAGE_CPA_TEST, which is only
used on kernel mappings, so they can co-exist happily.

Is _PAGE_IOMAP at all useful for device passthrough in kvm?

    J

Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Avi Kivity]

Jeremy Fitzhardinge wrote:
> Avi Kivity wrote:
>   
>> Jeremy Fitzhardinge wrote:
>>     
>>> Use one of the software-defined PTE bits to indicate that a mapping is
>>> intended for an IO address.  On native hardware this is irrelevent,
>>> since a physical address is a physical address.  But in a virtual
>>> environment, physical addresses are also virtualized, so there needs
>>> to be some way to distinguish between pseudo-physical addresses and
>>> actual hardware addresses; _PAGE_IOMAP indicates this intent.
>>>
>>> By default, __supported_pte_mask masks out _PAGE_IOMAP, so it doesn't
>>> even appear in the final pagetable.
>>>   
>>>       
>> Could PTE_SPECIAL, added for get_user_pages_really_fast(), be reused
>> for this?
>>
>>     
>
> I'm not sure; I still don't really understand how _PAGE_SPECIAL gets
> used, other than being user-mode mapping only.  But in principle,
> _PAGE_IOMAP could be set on both kernel and user mappings (if you direct
> map a device into a process address space), so I think they would
> conflict then?
>
>   

It's a "don't refcount me" flag, which is not sematically the same as 
I/O, but may be close enough.

> Is _PAGE_IOMAP at all useful for device passthrough in kvm?
>   

No.  We don't care if a page is an I/O page or RAM (other than 
refcounting correctness and page attributes, which are handled by other 
means).

-- 
error compiling committee.c: too many arguments to function

Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Keir Fraser]

On 9/9/08 15:56, "Avi Kivity" <avi@qumranet.com> wrote:

>> I'm not sure; I still don't really understand how _PAGE_SPECIAL gets
>> used, other than being user-mode mapping only.  But in principle,
>> _PAGE_IOMAP could be set on both kernel and user mappings (if you direct
>> map a device into a process address space), so I think they would
>> conflict then?
> 
> It's a "don't refcount me" flag, which is not sematically the same as
> I/O, but may be close enough.

That's basically what our _PAGE_IO flag (in our old Linux patchset) means.
We use it to cause pte_pfn() to return an invalid pfn and hence avoid
reference counting that way. Since kernel mappings are never reference
counted (I think?) perhaps we could use _PAGE_SPECIAL even if it is
restricted to use on user mappings.

 -- Keir

Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Jeremy Fitzhardinge]

Keir Fraser wrote:
> That's basically what our _PAGE_IO flag (in our old Linux patchset) means.
> We use it to cause pte_pfn() to return an invalid pfn and hence avoid
> reference counting that way. Since kernel mappings are never reference
> counted (I think?) perhaps we could use _PAGE_SPECIAL even if it is
> restricted to use on user mappings.

Well, _PAGE_IOMAP's most important semantic from Xen's perspective is
that the frame number is considered to already be an MFN and so isn't
converted.  It may be that _PAGE_SPECIAL is also useful for its "no
refcount" properties, but we could set both in that case.

At present we can't set _PAGE_SPECIAL on kernel mappings because we
assume its usermode only, and its shared with _PAGE_CPA_TEST which is
kernel-only.  Most _PAGE_IOMAP mappings are in kernel space, but I
wouldn't discount user mappings if we end up allowing direct access to
passthrough devices.

    J

Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Keir Fraser]

On 9/9/08 16:48, "Jeremy Fitzhardinge" <jeremy@goop.org> wrote:

> Keir Fraser wrote:
>> That's basically what our _PAGE_IO flag (in our old Linux patchset) means.
>> We use it to cause pte_pfn() to return an invalid pfn and hence avoid
>> reference counting that way. Since kernel mappings are never reference
>> counted (I think?) perhaps we could use _PAGE_SPECIAL even if it is
>> restricted to use on user mappings.
> 
> Well, _PAGE_IOMAP's most important semantic from Xen's perspective is
> that the frame number is considered to already be an MFN and so isn't
> converted.  It may be that _PAGE_SPECIAL is also useful for its "no
> refcount" properties, but we could set both in that case.

Oh, yes, our _PAGE_IO has the same meaning.

 -- Keir

Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Avi Kivity]

Avi Kivity wrote:
>>
>> I'm not sure; I still don't really understand how _PAGE_SPECIAL gets
>> used, other than being user-mode mapping only.  But in principle,
>> _PAGE_IOMAP could be set on both kernel and user mappings (if you direct
>> map a device into a process address space), so I think they would
>> conflict then?
>>
>>   
>
> It's a "don't refcount me" flag, which is not sematically the same as 
> I/O, but may be close enough.

Actually it's more of a "no struct page" flag, which implies no 
refcounting.  And not having a struct page should correspond well to a 
pte not requiring pfn->mfn conversion and being an I/O page.

-- 
error compiling committee.c: too many arguments to function

Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Jeremy Fitzhardinge]

Avi Kivity wrote:
> Actually it's more of a "no struct page" flag, which implies no
> refcounting.

Hm, is that actually true enough to define it?  Could we rename it
something like _PAGE_NOSTRUCTPAGE or something a bit more specific than
"special"?

>   And not having a struct page should correspond well to a pte not
> requiring pfn->mfn conversion and being an I/O page.

But _PAGE_SPECIAL is only set in a few places.  It's not set in ioremap
mappings and so on.  Should it be?

There's also the hiccup that it gets set in a pte with pte_mkspecial() -
but at that point its too late because you've already constructed the
pte and done the pfn->mfn conversion.  _PAGE_IOMAP can only be set when
you initially construct the pte out of a frame number and a pgprot.

    J

Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Nick Piggin]

On Thursday 11 September 2008 02:38, Jeremy Fitzhardinge wrote:
> Avi Kivity wrote:
> > Actually it's more of a "no struct page" flag, which implies no
> > refcounting.
>
> Hm, is that actually true enough to define it?  Could we rename it
> something like _PAGE_NOSTRUCTPAGE or something a bit more specific than
> "special"?

It complements vm_normal_page, which was there first (and coined by
Linus). It is the opposite of normal. This question always comes up
and my answer is always yes, if you can convince Linus to rename
vm_normal_page to the corresponding term :)

It's not exactly _PAGE_NOSTRUCTPAGE. There can be struct pages under
there, but you're not to touch them.


> >   And not having a struct page should correspond well to a pte not
> > requiring pfn->mfn conversion and being an I/O page.
>
> But _PAGE_SPECIAL is only set in a few places.  It's not set in ioremap
> mappings and so on.  Should it be?

Kernel address space, you mean? No, it is only ever used on user
addresses.


> There's also the hiccup that it gets set in a pte with pte_mkspecial() -
> but at that point its too late because you've already constructed the
> pte and done the pfn->mfn conversion.  _PAGE_IOMAP can only be set when
> you initially construct the pte out of a frame number and a pgprot.

I don't see this would be any problem because the pte is always constructed
in a single line in both places where it is used.

Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings

[Jeremy Fitzhardinge]

Nick Piggin wrote:
> It complements vm_normal_page, which was there first (and coined by
> Linus). It is the opposite of normal. This question always comes up
> and my answer is always yes, if you can convince Linus to rename
> vm_normal_page to the corresponding term :)
>   

Not really.  Normal is normal, but "special" doesn't tell us what kind
of special it is.

> It's not exactly _PAGE_NOSTRUCTPAGE. There can be struct pages under
> there, but you're not to touch them.
>   

To the extent that the struct page may as well not exist?  Does it
contain any meaningful state?  Are they always IO mappings?  Could we
just use _PAGE_IOMAP as the name for _PAGE_SPECIAL?

>>>   And not having a struct page should correspond well to a pte not
>>> requiring pfn->mfn conversion and being an I/O page.
>>>       
>> But _PAGE_SPECIAL is only set in a few places.  It's not set in ioremap
>> mappings and so on.  Should it be?
>>     
>
> Kernel address space, you mean? No, it is only ever used on user
> addresses.
>   

Right.  But if we fold _PAGE_SPECIAL and _PAGE_IOMAP together, it would
start getting used on kernel addresses (and obviously we'd need to
rearrange _PAGE_CPA_TEST).

>> There's also the hiccup that it gets set in a pte with pte_mkspecial() -
>> but at that point its too late because you've already constructed the
>> pte and done the pfn->mfn conversion.  _PAGE_IOMAP can only be set when
>> you initially construct the pte out of a frame number and a pgprot.
>>     
>
> I don't see this would be any problem because the pte is always constructed
> in a single line in both places where it is used.
>   

OK.  If we were to fold these two together, then pte_mkspecial() would
have to go, since it wouldn't possible to use correctly in my use case.

    J

[PATCH 2 of 7] x86: remove duplicate early_ioremap declarations

[Jeremy Fitzhardinge]

early_ioremap() is redeclared in several places; remove them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 include/asm-x86/io.h    |   14 --------------
 include/asm-x86/io_64.h |    3 ---
 2 files changed, 17 deletions(-)

diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h
--- a/include/asm-x86/io.h
+++ b/include/asm-x86/io.h
@@ -4,20 +4,6 @@
 #define ARCH_HAS_IOREMAP_WC
 
 #include <linux/compiler.h>
-
-/*
- * early_ioremap() and early_iounmap() are for temporary early boot-time
- * mappings, before the real ioremap() is functional.
- * A boot-time mapping is currently limited to at most 16 pages.
- */
-#ifndef __ASSEMBLY__
-extern void early_ioremap_init(void);
-extern void early_ioremap_clear(void);
-extern void early_ioremap_reset(void);
-extern void *early_ioremap(unsigned long offset, unsigned long size);
-extern void early_iounmap(void *addr, unsigned long size);
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-#endif
 
 #define build_mmio_read(name, size, type, reg, barrier) \
 static inline type name(const volatile void __iomem *addr) \
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
--- a/include/asm-x86/io_64.h
+++ b/include/asm-x86/io_64.h
@@ -165,9 +165,6 @@
 
 #include <asm-generic/iomap.h>
 
-extern void *early_ioremap(unsigned long addr, unsigned long size);
-extern void early_iounmap(void *addr, unsigned long size);
-
 /*
  * This one maps high address device memory and turns off caching for that area.
  * it's useful if some control registers are in such an area and write combining

[PATCH 3 of 7] x86: add early_memremap()

[Jeremy Fitzhardinge]

early_ioremap() is also used to map normal memory when constructing
the linear memory mapping.  However, since we sometimes need to be able
to distinguish between actual IO mappings and normal memory mappings,
add a early_memremap() call, which maps with PAGE_KERNEL (as opposed
to PAGE_KERNEL_IO for early_ioremap()), and use it when constructing
pagetables.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/init_64.c |    2 +-
 arch/x86/mm/ioremap.c |   22 +++++++++++++++++-----
 include/asm-x86/io.h  |    1 +
 3 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -312,7 +312,7 @@
 	if (pfn >= table_top)
 		panic("alloc_low_page: ran out of memory");
 
-	adr = early_ioremap(pfn * PAGE_SIZE, PAGE_SIZE);
+	adr = early_memremap(pfn * PAGE_SIZE, PAGE_SIZE);
 	memset(adr, 0, PAGE_SIZE);
 	*phys  = pfn * PAGE_SIZE;
 	return adr;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -549,12 +549,12 @@
 }
 
 static inline void __init early_set_fixmap(enum fixed_addresses idx,
-					unsigned long phys)
+					   unsigned long phys, pgprot_t prot)
 {
 	if (after_paging_init)
-		set_fixmap(idx, phys);
+		__set_fixmap(idx, phys, prot);
 	else
-		__early_set_fixmap(idx, phys, PAGE_KERNEL);
+		__early_set_fixmap(idx, phys, prot);
 }
 
 static inline void __init early_clear_fixmap(enum fixed_addresses idx)
@@ -582,7 +582,7 @@
 }
 late_initcall(check_early_ioremap_leak);
 
-void __init *early_ioremap(unsigned long phys_addr, unsigned long size)
+static void __init *__early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot)
 {
 	unsigned long offset, last_addr;
 	unsigned int nrpages, nesting;
@@ -631,7 +631,7 @@
 	idx0 = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*nesting;
 	idx = idx0;
 	while (nrpages > 0) {
-		early_set_fixmap(idx, phys_addr);
+		early_set_fixmap(idx, phys_addr, prot);
 		phys_addr += PAGE_SIZE;
 		--idx;
 		--nrpages;
@@ -640,6 +640,18 @@
 		printk(KERN_CONT "%08lx + %08lx\n", offset, fix_to_virt(idx0));
 
 	return (void *) (offset + fix_to_virt(idx0));
+}
+
+/* Remap an IO device */
+void __init *early_ioremap(unsigned long phys_addr, unsigned long size)
+{
+	return __early_ioremap(phys_addr, size, PAGE_KERNEL_IO);
+}
+
+/* Remap memory */
+void __init *early_memremap(unsigned long phys_addr, unsigned long size)
+{
+	return __early_ioremap(phys_addr, size, PAGE_KERNEL);
 }
 
 void __init early_iounmap(void *addr, unsigned long size)
diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h
--- a/include/asm-x86/io.h
+++ b/include/asm-x86/io.h
@@ -83,6 +83,7 @@
 extern void early_ioremap_clear(void);
 extern void early_ioremap_reset(void);
 extern void *early_ioremap(unsigned long offset, unsigned long size);
+extern void *early_memremap(unsigned long offset, unsigned long size);
 extern void early_iounmap(void *addr, unsigned long size);
 extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
 

[PATCH 4 of 7] x86: use early_memremap() in setup.c

[Jeremy Fitzhardinge]

The remappings in setup.c are all just ordinary memory, so use
early_memremap() rather than early_ioremap().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/setup.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -302,7 +302,7 @@
 		if (clen > MAX_MAP_CHUNK-slop)
 			clen = MAX_MAP_CHUNK-slop;
 		mapaddr = ramdisk_image & PAGE_MASK;
-		p = early_ioremap(mapaddr, clen+slop);
+		p = early_memremap(mapaddr, clen+slop);
 		memcpy(q, p+slop, clen);
 		early_iounmap(p, clen+slop);
 		q += clen;
@@ -379,7 +379,7 @@
 		return;
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
-		data = early_ioremap(pa_data, PAGE_SIZE);
+		data = early_memremap(pa_data, PAGE_SIZE);
 		switch (data->type) {
 		case SETUP_E820_EXT:
 			parse_e820_ext(data, pa_data);
@@ -402,7 +402,7 @@
 		return;
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
-		data = early_ioremap(pa_data, sizeof(*data));
+		data = early_memremap(pa_data, sizeof(*data));
 		e820_update_range(pa_data, sizeof(*data)+data->len,
 			 E820_RAM, E820_RESERVED_KERN);
 		found = 1;
@@ -428,7 +428,7 @@
 		return;
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
-		data = early_ioremap(pa_data, sizeof(*data));
+		data = early_memremap(pa_data, sizeof(*data));
 		sprintf(buf, "setup data %x", data->type);
 		reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
 		pa_data = data->next;

[PATCH 5 of 7] x86-64: don't check for map replacement

[Jeremy Fitzhardinge]

The check prevents flags on mappings from being changed, which is not
desireable.  There's no need to check for replacing a mapping, and
x86-32 does not do this check.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/init_64.c |    3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -195,9 +195,6 @@
 	}
 
 	pte = pte_offset_kernel(pmd, vaddr);
-	if (!pte_none(*pte) && pte_val(new_pte) &&
-	    pte_val(*pte) != (pte_val(new_pte) & __supported_pte_mask))
-		pte_ERROR(*pte);
 	set_pte(pte, new_pte);
 
 	/*

[PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Jeremy Fitzhardinge]

__acpi_map_table() effectively reimplements early_ioremap().  Rather
than have that duplication, just implement it in terms of
early_ioremap().

However, unlike early_ioremap(), __acpi_map_table() just maintains a
single mapping which gets replaced each call, and has no corresponding
unmap function.  Implement this by just removing the previous mapping
each time its called.  Unfortunately, this will leave a stray mapping
at the end.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/acpi/boot.c |   27 +++++++--------------------
 include/asm-x86/acpi.h      |    3 ---
 include/asm-x86/fixmap_32.h |    4 ----
 include/asm-x86/fixmap_64.h |    4 ----
 4 files changed, 7 insertions(+), 31 deletions(-)

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -121,8 +121,8 @@
  */
 char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 {
-	unsigned long base, offset, mapped_size;
-	int idx;
+	static char *prev_map;
+	static unsigned long prev_size;
 
 	if (!phys || !size)
 		return NULL;
@@ -130,26 +130,13 @@
 	if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT))
 		return __va(phys);
 
-	offset = phys & (PAGE_SIZE - 1);
-	mapped_size = PAGE_SIZE - offset;
-	clear_fixmap(FIX_ACPI_END);
-	set_fixmap(FIX_ACPI_END, phys);
-	base = fix_to_virt(FIX_ACPI_END);
+	if (prev_map)
+		early_iounmap(prev_map, prev_size);
 
-	/*
-	 * Most cases can be covered by the below.
-	 */
-	idx = FIX_ACPI_END;
-	while (mapped_size < size) {
-		if (--idx < FIX_ACPI_BEGIN)
-			return NULL;	/* cannot handle this */
-		phys += PAGE_SIZE;
-		clear_fixmap(idx);
-		set_fixmap(idx, phys);
-		mapped_size += PAGE_SIZE;
-	}
+	prev_size = size;
+	prev_map = early_ioremap(phys, size);
 
-	return ((unsigned char *)base + offset);
+	return prev_map;
 }
 
 #ifdef CONFIG_PCI_MMCONFIG
diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h
--- a/include/asm-x86/acpi.h
+++ b/include/asm-x86/acpi.h
@@ -102,9 +102,6 @@
 	acpi_noirq = 1;
 }
 
-/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
-#define FIX_ACPI_PAGES 4
-
 extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
 
 static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h
--- a/include/asm-x86/fixmap_32.h
+++ b/include/asm-x86/fixmap_32.h
@@ -99,10 +99,6 @@
 			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_NESTING - 1,
 	FIX_WP_TEST,
-#ifdef CONFIG_ACPI
-	FIX_ACPI_BEGIN,
-	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
 	FIX_OHCI1394_BASE,
 #endif
diff --git a/include/asm-x86/fixmap_64.h b/include/asm-x86/fixmap_64.h
--- a/include/asm-x86/fixmap_64.h
+++ b/include/asm-x86/fixmap_64.h
@@ -50,10 +50,6 @@
 	FIX_PARAVIRT_BOOTMAP,
 #endif
 	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_ACPI
-	FIX_ACPI_BEGIN,
-	FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
 #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
 	FIX_OHCI1394_BASE,
 #endif

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Andi Kleen]

On Sun, Sep 07, 2008 at 03:21:18PM -0700, Jeremy Fitzhardinge wrote:
> __acpi_map_table() effectively reimplements early_ioremap().  Rather
> than have that duplication, just implement it in terms of
> early_ioremap().
> 
> However, unlike early_ioremap(), __acpi_map_table() just maintains a
> single mapping which gets replaced each call, and has no corresponding
> unmap function.  Implement this by just removing the previous mapping
> each time its called.  Unfortunately, this will leave a stray mapping
> at the end.

It would be better to just fix the ACPI code to unmap.

-Andi

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Jeremy Fitzhardinge]

Andi Kleen wrote:
> On Sun, Sep 07, 2008 at 03:21:18PM -0700, Jeremy Fitzhardinge wrote:
>   
>> __acpi_map_table() effectively reimplements early_ioremap().  Rather
>> than have that duplication, just implement it in terms of
>> early_ioremap().
>>
>> However, unlike early_ioremap(), __acpi_map_table() just maintains a
>> single mapping which gets replaced each call, and has no corresponding
>> unmap function.  Implement this by just removing the previous mapping
>> each time its called.  Unfortunately, this will leave a stray mapping
>> at the end.
>>     
>
> It would be better to just fix the ACPI code to unmap.

I was concerned that would cause lots of cross-arch churn, but of course
the only other relevant architecture is ia64.  I'll prep a followup patch.

    J

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

> >> However, unlike early_ioremap(), __acpi_map_table() just maintains 
> >> a single mapping which gets replaced each call, and has no 
> >> corresponding unmap function.  Implement this by just removing the 
> >> previous mapping each time its called.  Unfortunately, this will 
> >> leave a stray mapping at the end.
> >
> > It would be better to just fix the ACPI code to unmap.
> 
> I was concerned that would cause lots of cross-arch churn, but of 
> course the only other relevant architecture is ia64.  I'll prep a 
> followup patch.

uhm, there's a nasty trap in that route: it can potentially cause a lot 
of breakage.

It's not robust to assume that the ACPI code is sane wrt. 
mapping/unmapping, because it currently simply doesnt rely on robust 
unmapping (in the linear range).

I tried it in the past and i found tons of crappy ACPI code all around 
that just never unmapped tables. Leaking ACPI maps are hard to find as 
well, and it can occur anytime during bootup.

As a general principle it might be worth fixing those places, and we've 
hardened up the early-ioremap code for leaks during the PAT rewrite, 
still please realize that it can become non-trivial and it might cause a 
lot of unhappy users.

So i'd suggest a different, more carful approach: keep the new code you 
wrote, but print a WARN()ing if prev_map is not unmapped yet when the 
next mapping is acquired. That way the ACPI code can be fixed gradually 
and without breaking existing functionality.

There's another complication: ACPI might rely on multiple mappings being 
present at once, so unmapping the previous one might not be safe. But it 
_should_ be fine most of the time as __acpi_map_table() is only used 
inearly init code - and we fixed most of these things in the PAT 
patchset in any case.

	Ingo

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> uhm, there's a nasty trap in that route: it can potentially cause a lot 
> of breakage.
>
> It's not robust to assume that the ACPI code is sane wrt. 
> mapping/unmapping, because it currently simply doesnt rely on robust 
> unmapping (in the linear range).
>   

You mean there's code which just assumes that it can keep using a
linear-mapped acpi even after __acpi_map_table() should have implicitly
unmapped it?
> I tried it in the past and i found tons of crappy ACPI code all around 
> that just never unmapped tables. Leaking ACPI maps are hard to find as 
> well, and it can occur anytime during bootup.
>   

__acpi_map_table() is called by acpi_map_table(), which does have a
acpi_unmap_table() counterpart.  But it only calls iounmap() once we're
past the stage of calling early_*().  I could easily make it call
__acpi_unmap_table()->early_iounmap().  But if the concern is that the
early boot callers of acpi_map_table() "know" that they never need to
unmap, then yes, I see the problem.

> As a general principle it might be worth fixing those places, and we've 
> hardened up the early-ioremap code for leaks during the PAT rewrite, 
> still please realize that it can become non-trivial and it might cause a 
> lot of unhappy users.
>
> So i'd suggest a different, more carful approach: keep the new code you 
> wrote, but print a WARN()ing if prev_map is not unmapped yet when the 
> next mapping is acquired. That way the ACPI code can be fixed gradually 
> and without breaking existing functionality.
>   

Yep.

> There's another complication: ACPI might rely on multiple mappings being 
> present at once, so unmapping the previous one might not be safe. But it 
> _should_ be fine most of the time as __acpi_map_table() is only used 
> inearly init code - and we fixed most of these things in the PAT 
> patchset in any case.

And the current behaviour of __acpi_map_table() is to remove the
previous mapping (implicitly, by overwriting the same fixmap slots), so
its only an issue if the callers assume they can keep using
linear-mapped acpi tables after a subsequent call to __acpi_map_table().

    J

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> uhm, there's a nasty trap in that route: it can potentially cause a lot 
> of breakage.
>
> It's not robust to assume that the ACPI code is sane wrt. 
> mapping/unmapping, because it currently simply doesnt rely on robust 
> unmapping (in the linear range).
>
> I tried it in the past and i found tons of crappy ACPI code all around 
> that just never unmapped tables. Leaking ACPI maps are hard to find as 
> well, and it can occur anytime during bootup.
>   

Yes, you're right, it's a mess.  I put a unmap and warning in there, but
there's lots of acpi code which doesn't unmap after using its table.  It
doesn't seem to intermix using two tables, fortunately, so the "unmap
previous" behaviour of __acpi_map_table works OK, at least as far as I
can see.

    J

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Ingo Molnar]

> So i'd suggest a different, more carful approach: keep the new code 
> you wrote, but print a WARN()ing if prev_map is not unmapped yet when 
> the next mapping is acquired. That way the ACPI code can be fixed 
> gradually and without breaking existing functionality.

ok, i stuck in your patches into tip/master today and -tip testing 
quickly found an early-ioremap leak:

[   36.625100] calling  check_early_ioremap_leak+0x0/0x3d
[   36.630253] ------------[ cut here ]------------
[   36.634884] WARNING: at arch/x86/mm/ioremap.c:577 check_early_ioremap_leak+0x28/0x3d()
[   36.642811] Debug warning: early ioremap leak of 1 areas detected.

find the full log below with ioremap-leak-tracing turned on. I've 
excluded these commits for now from tip/master.

	Ingo

---------------->
[    0.000000] Linux version 2.6.27-rc6-tip-00189-gafeef79-dirty (mingo@titan) (gcc version 4.2.3) #1 SMP Wed Sep 10 13:53:53 CEST 2008
[    0.000000] Command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi early_ioremap_debug
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ed94000 (usable)
[    0.000000]  BIOS-e820: 000000003ed94000 - 000000003ee4e000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ee4e000 - 000000003fea2000 (usable)
[    0.000000]  BIOS-e820: 000000003fea2000 - 000000003fee9000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fee9000 - 000000003feed000 (usable)
[    0.000000]  BIOS-e820: 000000003feed000 - 000000003feff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003feff000 - 000000003ff00000 (usable)
[    0.000000] console [earlyser0] enabled
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] last_pfn = 0x3ff00 max_arch_pfn = 0x3ffffffff
[    0.000000] init_memory_mapping
[    0.000000]  0000000000 - 003fe00000 page 2M
[    0.000000]  003fe00000 - 003ff00000 page 4k
[    0.000000] kernel direct mapping tables up to 3ff00000 @ 8000-b000
[    0.000000] early_ioremap(00008000, 00001000) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff81278194>] early_memremap+0x13/0x15
[    0.000000]  [<ffffffff80bdc019>] alloc_low_page+0x76/0x98
[    0.000000]  [<ffffffff812b394b>] phys_pmd_init+0x171/0x1fa
[    0.000000]  [<ffffffff812b3ac9>] phys_pud_init+0xf5/0x1fb
[    0.000000]  [<ffffffff80bdc4c6>] init_memory_mapping+0x46d/0x5e5
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812685b2>] setup_arch+0x450/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000000 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400000, 00001000) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80230c27>] ? update_page_count+0x37/0x3c
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff80bdc057>] unmap_low_page+0x1c/0x1e
[    0.000000]  [<ffffffff812b3968>] phys_pmd_init+0x18e/0x1fa
[    0.000000]  [<ffffffff812b3ac9>] phys_pud_init+0xf5/0x1fb
[    0.000000]  [<ffffffff80bdc4c6>] init_memory_mapping+0x46d/0x5e5
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812685b2>] setup_arch+0x450/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] last_map_addr: 3ff00000 end: 3ff00000
[    0.000000] early_ioremap(000f0000, 00010000) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff812a7ba4>] dmi_scan_machine+0x74/0xd9
[    0.000000]  [<ffffffff812686dc>] setup_arch+0x57a/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000000 + ffffffffff400000
[    0.000000] DMI 2.3 present.
[    0.000000] early_ioremap(000e4d10, 0000061f) [1] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff812a7aec>] dmi_present+0xe3/0x127
[    0.000000]  [<ffffffff812a7bc0>] dmi_scan_machine+0x90/0xd9
[    0.000000]  [<ffffffff812686dc>] setup_arch+0x57a/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000d10 + ffffffffff440000
[    0.000000] early_iounmap(ffffffffff440d10, 0000061f) [1]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80a0f636>] ? dmi_table+0x56/0x81
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff812a7b20>] dmi_present+0x117/0x127
[    0.000000]  [<ffffffff812a7bc0>] dmi_scan_machine+0x90/0xd9
[    0.000000]  [<ffffffff812686dc>] setup_arch+0x57a/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_iounmap(ffffffffff400000, 00010000) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff812a7bdb>] dmi_scan_machine+0xab/0xd9
[    0.000000]  [<ffffffff812686dc>] setup_arch+0x57a/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(0000040e, 00000002) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ec343>] acpi_find_root_pointer+0x3f/0x254
[    0.000000]  [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54
[    0.000000]  [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 0000040e + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff40040e, 00000002) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ec3b8>] acpi_find_root_pointer+0xb4/0x254
[    0.000000]  [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54
[    0.000000]  [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(0009fc00, 00000400) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ec3b8>] acpi_find_root_pointer+0xb4/0x254
[    0.000000]  [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54
[    0.000000]  [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000c00 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400c00, 00000400) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ec46a>] acpi_find_root_pointer+0x166/0x254
[    0.000000]  [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54
[    0.000000]  [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(000e0000, 00020000) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ec46a>] acpi_find_root_pointer+0x166/0x254
[    0.000000]  [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54
[    0.000000]  [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000000 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400000, 00020000) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff8128aabe>] acpi_tb_parse_root_table+0x42/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(000fe020, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff8128aabe>] acpi_tb_parse_root_table+0x42/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000020 + ffffffffff400000
[    0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
[    0.000000] early_iounmap(ffffffffff400020, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff8128abb2>] acpi_tb_parse_root_table+0x136/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefde48, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff8128abb2>] acpi_tb_parse_root_table+0x136/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e48 + ffffffffff400000
[    0.000000] ACPI: RSDT 3FEFDE48, 0050 (r1 INTEL  D975XBX       4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400e48, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff8128ac61>] acpi_tb_parse_root_table+0x1e5/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefde48, 00000050) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff8128ac61>] acpi_tb_parse_root_table+0x1e5/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e48 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400e48, 00000050) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277e5d>] ? __early_set_fixmap+0xb3/0xbc
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefcf10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000f10 + ffffffffff400000
[    0.000000] ACPI: FACP 3FEFCF10, 0074 (r1 INTEL  D975XBX       4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400f10, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ec15f>] acpi_tb_parse_fadt+0x32/0x9b
[    0.000000]  [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefcf10, 00000074) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ec15f>] acpi_tb_parse_fadt+0x32/0x9b
[    0.000000]  [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000f10 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400f10, 00000074) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277e5d>] ? __early_set_fixmap+0xb3/0xbc
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff805ec1a3>] acpi_tb_parse_fadt+0x76/0x9b
[    0.000000]  [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff805ec1a3>] acpi_tb_parse_fadt+0x76/0x9b
[    0.000000]  [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000010 + ffffffffff400000
[    0.000000] ACPI: DSDT 3FEF8010, 3E70 (r1 INTEL  D975XBX       4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400010, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff805ec1bd>] acpi_tb_parse_fadt+0x90/0x9b
[    0.000000]  [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fedfc40, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff805ec1bd>] acpi_tb_parse_fadt+0x90/0x9b
[    0.000000]  [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000c40 + ffffffffff400000
[    0.000000] ACPI: FACS 3FEDFC40, 0040
[    0.000000] early_iounmap(ffffffffff400c40, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefce10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e10 + ffffffffff400000
[    0.000000] ACPI: APIC 3FEFCE10, 0078 (r1 INTEL  D975XBX       4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400e10, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fef7f90, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000f90 + ffffffffff400000
[    0.000000] ACPI: WDDT 3FEF7F90, 0040 (r1 INTEL  D975XBX       4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400f90, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fef7f10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000f10 + ffffffffff400000
[    0.000000] ACPI: MCFG 3FEF7F10, 003C (r1 INTEL  D975XBX       4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400f10, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefcd10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000d10 + ffffffffff400000
[    0.000000] ACPI: ASF! 3FEFCD10, 00A6 (r32 INTEL  D975XBX       4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400d10, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fef7e90, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e90 + ffffffffff400000
[    0.000000] ACPI: HPET 3FEF7E90, 0038 (r1 INTEL  D975XBX       4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400e90, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefdc10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000c10 + ffffffffff400000
[    0.000000] ACPI: SSDT 3FEFDC10, 01BC (r1 INTEL     CpuPm      4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400c10, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefda10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000a10 + ffffffffff400000
[    0.000000] ACPI: SSDT 3FEFDA10, 01B7 (r1 INTEL   Cpu0Ist      4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400a10, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefd810, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000810 + ffffffffff400000
[    0.000000] ACPI: SSDT 3FEFD810, 01B7 (r1 INTEL   Cpu1Ist      4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400810, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefd610, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000610 + ffffffffff400000
[    0.000000] ACPI: SSDT 3FEFD610, 01B7 (r1 INTEL   Cpu2Ist      4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400610, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefd410, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6
[    0.000000]  [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae
[    0.000000]  [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100
[    0.000000]  [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d
[    0.000000]  [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000410 + ffffffffff400000
[    0.000000] ACPI: SSDT 3FEFD410, 01B7 (r1 INTEL   Cpu3Ist      4B9 MSFT  1000013)
[    0.000000] early_iounmap(ffffffffff400410, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5
[    0.000000]  [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c
[    0.000000]  [<ffffffff805eabb6>] ? acpi_get_table+0xc/0x98
[    0.000000]  [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c
[    0.000000]  [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5
[    0.000000]  [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c
[    0.000000]  [<ffffffff805eabb6>] ? acpi_get_table+0xc/0x98
[    0.000000]  [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c
[    0.000000]  [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000010 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400010, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5
[    0.000000]  [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c
[    0.000000]  [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c
[    0.000000]  [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5
[    0.000000]  [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c
[    0.000000]  [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c
[    0.000000]  [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000010 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400010, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5
[    0.000000]  [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c
[    0.000000]  [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c
[    0.000000]  [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5
[    0.000000]  [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c
[    0.000000]  [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c
[    0.000000]  [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000010 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400010, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5
[    0.000000]  [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c
[    0.000000]  [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c
[    0.000000]  [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5
[    0.000000]  [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c
[    0.000000]  [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c
[    0.000000]  [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda
[    0.000000]  [<ffffffff812686e6>] setup_arch+0x584/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000010 + ffffffffff400000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003ff00000
[    0.000000] Bootmem setup node 0 0000000000000000-000000003ff00000
[    0.000000]   NODE_DATA [0000000000009000 - 000000000003cfff]
[    0.000000]   bootmap [000000000003d000 -  0000000000044fdf] pages 8
[    0.000000] (5 early reservations) ==> bootmem [0000000000 - 003ff00000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 0001e6ede0]    TEXT DATA BSS ==> [0000200000 - 0001e6ede0]
[    0.000000]   #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #4 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
[    0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[    0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[    0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[    0.000000] found SMP MP-table at [ffff8800000fe680] 000fe680
[    0.000000]  [ffffe20000000000-ffffe200015fffff] PMD -> [ffff880002000000-ffff8800035fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003ed94
[    0.000000]     0: 0x0003ee4e -> 0x0003fea2
[    0.000000]     0: 0x0003fee9 -> 0x0003feed
[    0.000000]     0: 0x0003feff -> 0x0003ff00
[    0.000000] On node 0 totalpages: 261516
[    0.000000]   DMA zone: 3809 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 251978 pages, LIFO batch:31
[    0.000000] early_iounmap(ffffffffff400010, 00000024) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8126d0b3>] ? acpi_parse_fadt+0x0/0x4f
[    0.000000]  [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68
[    0.000000]  [<ffffffff8126d764>] acpi_boot_init+0x4a/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefcf10, 00000074) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8126d0b3>] ? acpi_parse_fadt+0x0/0x4f
[    0.000000]  [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68
[    0.000000]  [<ffffffff8126d764>] acpi_boot_init+0x4a/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000f10 + ffffffffff400000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] early_iounmap(ffffffffff400f10, 00000074) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8126d312>] ? acpi_parse_madt+0x0/0x74
[    0.000000]  [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68
[    0.000000]  [<ffffffff8126d777>] acpi_boot_init+0x5d/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8126d312>] ? acpi_parse_madt+0x0/0x74
[    0.000000]  [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68
[    0.000000]  [<ffffffff8126d777>] acpi_boot_init+0x5d/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e10 + ffffffffff400000
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] early_iounmap(ffffffffff400e10, 00000078) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff8024ba80>] ? printk+0x6c/0x6e
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126ce45>] ? acpi_parse_lapic_addr_ovr+0x0/0x2e
[    0.000000]  [<ffffffff8126d37d>] ? acpi_parse_madt+0x6b/0x74
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d7ab>] acpi_boot_init+0x91/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126ce45>] ? acpi_parse_lapic_addr_ovr+0x0/0x2e
[    0.000000]  [<ffffffff8126d37d>] ? acpi_parse_madt+0x6b/0x74
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d7ab>] acpi_boot_init+0x91/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e10 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400e10, 00000078) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d284>] ? acpi_parse_sapic+0x0/0x4b
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d7da>] acpi_boot_init+0xc0/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d284>] ? acpi_parse_sapic+0x0/0x4b
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d7da>] acpi_boot_init+0xc0/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e10 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400e10, 00000078) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d2cf>] ? acpi_parse_lapic+0x0/0x43
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d7f3>] acpi_boot_init+0xd9/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d2cf>] ? acpi_parse_lapic+0x0/0x43
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d7f3>] acpi_boot_init+0xd9/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e10 + ffffffffff400000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] early_iounmap(ffffffffff400e10, 00000078) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d23e>] ? acpi_parse_lapic_nmi+0x0/0x46
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d822>] acpi_boot_init+0x108/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d23e>] ? acpi_parse_lapic_nmi+0x0/0x46
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d822>] acpi_boot_init+0x108/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e10 + ffffffffff400000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] early_iounmap(ffffffffff400e10, 00000078) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126db30>] ? acpi_parse_ioapic+0x0/0x41
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d8a1>] acpi_boot_init+0x187/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126db30>] ? acpi_parse_ioapic+0x0/0x41
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d8a1>] acpi_boot_init+0x187/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e10 + ffffffffff400000
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] early_iounmap(ffffffffff400e10, 00000078) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d5b3>] ? acpi_parse_int_src_ovr+0x0/0x9f
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d8e7>] acpi_boot_init+0x1cd/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d5b3>] ? acpi_parse_int_src_ovr+0x0/0x9f
[    0.000000]  [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d8e7>] acpi_boot_init+0x1cd/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e10 + ffffffffff400000
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] early_iounmap(ffffffffff400e10, 00000078) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d216>] ? acpi_parse_nmi_src+0x0/0x28
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d929>] acpi_boot_init+0x20f/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109
[    0.000000]  [<ffffffff8126d216>] ? acpi_parse_nmi_src+0x0/0x28
[    0.000000]  [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f
[    0.000000]  [<ffffffff8126d929>] acpi_boot_init+0x20f/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e10 + ffffffffff400000
[    0.000000] early_iounmap(ffffffffff400e10, 00000078) [0]
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4
[    0.000000]  [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8126d386>] ? acpi_parse_hpet+0x0/0x143
[    0.000000]  [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68
[    0.000000]  [<ffffffff8126d9b6>] acpi_boot_init+0x29c/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] early_ioremap(3fef7e90, 00000038) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe
[    0.000000]  [<ffffffff81278077>] __early_ioremap+0x61/0x16b
[    0.000000]  [<ffffffff812781a9>] early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51
[    0.000000]  [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20
[    0.000000]  [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3
[    0.000000]  [<ffffffff805eabfa>] acpi_get_table+0x50/0x98
[    0.000000]  [<ffffffff8126d386>] ? acpi_parse_hpet+0x0/0x143
[    0.000000]  [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68
[    0.000000]  [<ffffffff8126d9b6>] acpi_boot_init+0x29c/0x2a2
[    0.000000]  [<ffffffff81268744>] setup_arch+0x5e2/0x67c
[    0.000000]  [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff81261b73>] start_kernel+0xe9/0x40a
[    0.000000]  [<ffffffff81261140>] ? early_idt_handler+0x0/0x73
[    0.000000]  [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad
[    0.000000]  [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b
[    0.000000] 00000e90 + ffffffffff400000
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] mapped APIC to ffffffffff5fc000 (fee00000)
[    0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000)
[    0.000000] dyn_array irq_2_pin_head+0x0/0x8 size:0x10 nr:256 align:0x1000
[    0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x420 nr:32 align:0x1000
[    0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x500 nr:32 align:0x1000
[    0.000000] dyn_array total_size: 0x14000
[    0.000000] dyn_array irq_2_pin_head+0x0/0x8  ==> [0x1e83000 - 0x1e84000]
[    0.000000] dyn_array irq_cfgx+0x0/0x8  ==> [0x1e84000 - 0x1e8c400]
[    0.000000] dyn_array sparse_irqs+0x0/0x8  ==> [0x1e8d000 - 0x1e97000]
[    0.000000] kstat_irqs ==> [0x1e97000 - 0x1e97200]
[    0.000000] PERCPU: Allocating 57344 bytes of per cpu data
[    0.000000] per cpu data for cpu0 on node0 at 0000000001e98000
[    0.000000] per cpu data for cpu1 on node0 at 0000000001ea6000
[    0.000000] per cpu data for cpu2 on node0 at 0000000001eb4000
[    0.000000] per cpu data for cpu3 on node0 at 0000000001ec2000
[    0.000000] NR_CPUS: 4096, nr_cpu_ids: 4, nr_node_ids 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 255787
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi early_ioremap_debug
[    0.000000] kernel profiling enabled (shift: 0)
[    0.000000] debug: sysrq always enabled.
[    0.000000] Initializing CPU#0
[    0.000000] found new irq_desc for irq 0
[    0.000000] found new irq_desc for irq 1
[    0.000000] found new irq_desc for irq 2
[    0.000000] found new irq_desc for irq 3
[    0.000000] found new irq_desc for irq 4
[    0.000000] found new irq_desc for irq 5
[    0.000000] found new irq_desc for irq 6
[    0.000000] found new irq_desc for irq 7
[    0.000000] found new irq_desc for irq 8
[    0.000000] found new irq_desc for irq 9
[    0.000000] found new irq_desc for irq 10
[    0.000000] found new irq_desc for irq 11
[    0.000000] found new irq_desc for irq 12
[    0.000000] found new irq_desc for irq 13
[    0.000000] found new irq_desc for irq 14
[    0.000000] found new irq_desc for irq 15
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2933.341 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console handover: boot [earlyser0] -> real [tty0]
[    0.004000] console [ttyS0] enabled
[    0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.004000] ... MAX_LOCKDEP_SUBCLASSES:    8
[    0.004000] ... MAX_LOCK_DEPTH:          48
[    0.004000] ... MAX_LOCKDEP_KEYS:        8191
[    0.004000] ... CLASSHASH_SIZE:           4096
[    0.004000] ... MAX_LOCKDEP_ENTRIES:     8192
[    0.004000] ... MAX_LOCKDEP_CHAINS:      16384
[    0.004000] ... CHAINHASH_SIZE:          8192
[    0.004000]  memory used by lock dependency info: 3839 kB
[    0.004000]  per task-struct memory footprint: 1920 bytes
[    0.004000] ------------------------
[    0.004000] | Locking API testsuite:
[    0.004000] ----------------------------------------------------------------------------
[    0.004000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.004000]   --------------------------------------------------------------------------
[    0.004000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.004000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.004000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.004000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.004000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.004000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.004000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.004000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.004000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.004000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.004000]   --------------------------------------------------------------------------
[    0.004000]               recursive read-lock:             |  ok  |             |failed|
[    0.004000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.004000]             mixed read-write-lock:             |failed|             |failed|
[    0.004000]             mixed write-read-lock:             |failed|             |failed|
[    0.004000]   --------------------------------------------------------------------------
[    0.004000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.004000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.004000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.004000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.004000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.004000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.004000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.004000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.004000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.004000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.004000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.004000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.004000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.004000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.004000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.004000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.004000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.004000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.004000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.004000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.004000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.004000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.004000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.004000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.004000]       hard-irq read-recursion/123:  ok  |
[    0.004000]       soft-irq read-recursion/123:  ok  |
[    0.004000]       hard-irq read-recursion/132:  ok  |
[    0.004000]       soft-irq read-recursion/132:  ok  |
[    0.004000]       hard-irq read-recursion/213:  ok  |
[    0.004000]       soft-irq read-recursion/213:  ok  |
[    0.004000]       hard-irq read-recursion/231:  ok  |
[    0.004000]       soft-irq read-recursion/231:  ok  |
[    0.004000]       hard-irq read-recursion/312:  ok  |
[    0.004000]       soft-irq read-recursion/312:  ok  |
[    0.004000]       hard-irq read-recursion/321:  ok  |
[    0.004000]       soft-irq read-recursion/321:  ok  |
[    0.004000] --------------------------------------------------------
[    0.004000] 133 out of 218 testcases failed, as expected. |
[    0.004000] ----------------------------------------------------
[    0.004000] Checking aperture...
[    0.004000] No AGP bridge found
[    0.004000] Calgary: detecting Calgary via BIOS EBDA area
[    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.004000] Memory: 952092k/1047552k available (10447k kernel code, 93972k reserved, 5618k data, 1468k init)
[    0.004000] CPA: page pool initialized 16 of 16 pages preallocated
[    0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.68 BogoMIPS (lpj=11733364)
[    0.008087] Security Framework initialized
[    0.012385] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.016782] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.020326] Mount-cache hash table entries: 256
[    0.024616] Initializing cgroup subsys debug
[    0.028012] Initializing cgroup subsys ns
[    0.032013] Initializing cgroup subsys devices
[    0.036044] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.040006] CPU: L2 cache: 4096K
[    0.044007] CPU 0/0 -> Node 0
[    0.046989] CPU: Physical Processor ID: 0
[    0.048006] CPU: Processor Core ID: 0
[    0.052012] CPU0: Thermal monitoring enabled (TM2)
[    0.056007] using mwait in idle threads.
[    0.060008] numa_add_cpu cpu 0 node 0: mask now 0
[    0.064606] ACPI: Core revision 20080609
[    0.082980] Parsing all Control Methods:
[    0.084273] Table [DSDT](id 0001) - 529 Objects with 55 Devices 147 Methods 32 Regions
[    0.088427] Parsing all Control Methods:
[    0.092258] Table [SSDT](id 0002) - 10 Objects with 0 Devices 4 Methods 0 Regions
[    0.096228] Parsing all Control Methods:
[    0.100260] Table [SSDT](id 0003) - 5 Objects with 0 Devices 3 Methods 0 Regions
[    0.104228] Parsing all Control Methods:
[    0.108263] Table [SSDT](id 0004) - 5 Objects with 0 Devices 3 Methods 0 Regions
[    0.112238] Parsing all Control Methods:
[    0.116267] Table [SSDT](id 0005) - 5 Objects with 0 Devices 3 Methods 0 Regions
[    0.120231] Parsing all Control Methods:
[    0.124268] Table [SSDT](id 0006) - 5 Objects with 0 Devices 3 Methods 0 Regions
[    0.128011]  tbxface-0596 [02] tb_load_namespace     : ACPI Tables successfully acquired
[    0.140013] evxfevnt-0091 [02] enable                : Transition to ACPI mode successful
[    0.148171] Setting APIC routing to flat
[    0.152014] enabled ExtINT on CPU#0
[    0.156156] ENABLING IO-APIC IRQs
[    0.159484] init IO_APIC IRQs
[    0.160013]  2-0<7> 0 add_pin_to_irq: irq 1 --> apic 0 pin 1
[    0.168023] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    0.172016]  0 add_pin_to_irq: irq 0 --> apic 0 pin 2
[    0.176015] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[    0.180016]  0 add_pin_to_irq: irq 3 --> apic 0 pin 3
[    0.184014] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
[    0.188015]  0 add_pin_to_irq: irq 4 --> apic 0 pin 4
[    0.192014] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[    0.196016]  0 add_pin_to_irq: irq 5 --> apic 0 pin 5
[    0.200015] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
[    0.204016]  0 add_pin_to_irq: irq 6 --> apic 0 pin 6
[    0.208016] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[    0.212017]  0 add_pin_to_irq: irq 7 --> apic 0 pin 7
[    0.216016] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[    0.220017]  0 add_pin_to_irq: irq 8 --> apic 0 pin 8
[    0.224016] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    0.228018]  0 add_pin_to_irq: irq 9 --> apic 0 pin 9
[    0.232017] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
[    0.236018]  0 add_pin_to_irq: irq 10 --> apic 0 pin 10
[    0.240018] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[    0.244019]  0 add_pin_to_irq: irq 11 --> apic 0 pin 11
[    0.248018] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
[    0.252019]  0 add_pin_to_irq: irq 12 --> apic 0 pin 12
[    0.256019] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    0.260020]  0 add_pin_to_irq: irq 13 --> apic 0 pin 13
[    0.264019] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    0.268020]  0 add_pin_to_irq: irq 14 --> apic 0 pin 14
[    0.272020] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[    0.276021]  0 add_pin_to_irq: irq 15 --> apic 0 pin 15
[    0.280020] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[    0.284021]  2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
[    0.291635] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.333484] CPU0: Intel(R) Core(TM)2 CPU         E6800  @ 2.93GHz stepping 05
[    0.340023] Using local APIC timer interrupts.
[    0.340023] calibrating APIC timer ...
[    0.348021] ... lapic delta = 1666650
[    0.348021] ... PM timer delta = 357952
[    0.348021] ... PM timer result ok
[    0.348021] ..... delta 1666650
[    0.348021] ..... mult: 71577598
[    0.348021] ..... calibration result: 1066656
[    0.348021] ..... CPU clock speed is 2933.1227 MHz.
[    0.348021] ..... host bus clock speed is 266.2656 MHz.
[    0.348035] calling  migration_init+0x0/0x5b
[    0.352091] initcall migration_init+0x0/0x5b returned 1 after 0 msecs
[    0.358401] initcall migration_init+0x0/0x5b returned with error code 1 
[    0.364024] calling  spawn_ksoftirqd+0x0/0x58
[    0.368083] initcall spawn_ksoftirqd+0x0/0x58 returned 0 after 0 msecs
[    0.376027] calling  init_call_single_data+0x0/0x76
[    0.380026] initcall init_call_single_data+0x0/0x76 returned 0 after 0 msecs
[    0.388026] calling  relay_init+0x0/0x14
[    0.392027] initcall relay_init+0x0/0x14 returned 0 after 0 msecs
[    0.398502] lockdep: fixing up alternatives.
[    0.400088] Booting processor 1/1 ip 6000
[    0.004000] Initializing CPU#1
[    0.004000] masked ExtINT on CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 5866.69 BogoMIPS (lpj=11733398)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 4096K
[    0.004000] CPU 1/1 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.004000] numa_add_cpu cpu 1 node 0: mask now 0-1
[    0.496639] CPU1: Intel(R) Core(TM)2 CPU         E6800  @ 2.93GHz stepping 05
[    0.505296] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.508064] Brought up 2 CPUs
[    0.512034] Total of 2 processors activated (11733.38 BogoMIPS).
[    0.516183] CPU0 attaching sched-domain:
[    0.520035]  domain 0: span 0-1 level MC
[    0.525716]   groups: 0 1
[    0.528659]   domain 1: span 0-1 level NODE
[    0.532032]    groups: 0-1
[    0.536249] CPU1 attaching sched-domain:
[    0.540036]  domain 0: span 0-1 level MC
[    0.545716]   groups: 1 0
[    0.548662]   domain 1: span 0-1 level NODE
[    0.552032]    groups: 0-1
[    0.556350] device: 'platform': device_add
[    0.560052] PM: Adding info for No Bus:platform
[    0.564118] bus: 'platform': registered
[    0.568037] Registering sysdev class 'cpu'
[    0.572276] calling  net_ns_init+0x0/0x13e
[    0.576034] net_namespace: 1648 bytes
[    0.580046] initcall net_ns_init+0x0/0x13e returned 0 after 3 msecs
[    0.586410] calling  init_smp_flush+0x0/0x66
[    0.588033] initcall init_smp_flush+0x0/0x66 returned 0 after 0 msecs
[    0.594410] calling  print_banner+0x0/0xe
[    0.596033] Booting paravirtualized kernel on bare hardware
[    0.600033] initcall print_banner+0x0/0xe returned 0 after 3 msecs
[    0.606409] calling  sysctl_init+0x0/0x16
[    0.608035] initcall sysctl_init+0x0/0x16 returned 0 after 0 msecs
[    0.616033] calling  ksysfs_init+0x0/0xbb
[    0.620097] initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs
[    0.626411] calling  init_jiffies_clocksource+0x0/0x12
[    0.628034] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs
[    0.634413] calling  pm_init+0x0/0x34
[    0.636040] initcall pm_init+0x0/0x34 returned 0 after 0 msecs
[    0.644034] calling  filelock_init+0x0/0x2e
[    0.648039] initcall filelock_init+0x0/0x2e returned 0 after 0 msecs
[    0.654410] calling  init_script_binfmt+0x0/0x12
[    0.656037] initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs
[    0.662410] calling  init_elf_binfmt+0x0/0x12
[    0.664033] initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs
[    0.672033] calling  init_compat_elf_binfmt+0x0/0x12
[    0.676034] initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs
[    0.682410] calling  debugfs_init+0x0/0x51
[    0.684039] initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs
[    0.692033] calling  securityfs_init+0x0/0x51
[    0.696038] initcall securityfs_init+0x0/0x51 returned 0 after 0 msecs
[    0.702410] calling  random32_init+0x0/0xca
[    0.704034] initcall random32_init+0x0/0xca returned 0 after 0 msecs
[    0.712034] calling  gnttab_init+0x0/0x16c
[    0.716033] initcall gnttab_init+0x0/0x16c returned -19 after 0 msecs
[    0.724033] calling  cpuidle_init+0x0/0x40
[    0.728040] initcall cpuidle_init+0x0/0x40 returned 0 after 0 msecs
[    0.734409] calling  sock_init+0x0/0x5e
[    0.736094] initcall sock_init+0x0/0x5e returned 0 after 0 msecs
[    0.744033] calling  netpoll_init+0x0/0x14
[    0.748034] initcall netpoll_init+0x0/0x14 returned 0 after 0 msecs
[    0.754410] calling  netlink_proto_init+0x0/0x14b
[    0.756069] NET: Registered protocol family 16
[    0.760058] initcall netlink_proto_init+0x0/0x14b returned 0 after 3 msecs
[    0.766410] calling  bdi_class_init+0x0/0x41
[    0.768034] device class 'bdi': registering
[    0.772097] initcall bdi_class_init+0x0/0x41 returned 0 after 3 msecs
[    0.778410] calling  kobject_uevent_init+0x0/0x45
[    0.780040] initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs
[    0.786410] calling  pcibus_class_init+0x0/0x19
[    0.788033] device class 'pci_bus': registering
[    0.792096] initcall pcibus_class_init+0x0/0x19 returned 0 after 3 msecs
[    0.798411] calling  pci_driver_init+0x0/0x12
[    0.800096] bus: 'pci': registered
[    0.804034] initcall pci_driver_init+0x0/0x12 returned 0 after 3 msecs
[    0.812033] calling  backlight_class_init+0x0/0x4d
[    0.816034] device class 'backlight': registering
[    0.820096] initcall backlight_class_init+0x0/0x4d returned 0 after 3 msecs
[    0.828033] calling  dock_init+0x0/0x5a
[    0.832218] No dock devices found.
[    0.836033] initcall dock_init+0x0/0x5a returned 0 after 3 msecs
[    0.842409] calling  xenbus_probe_init+0x0/0xf1
[    0.844033] initcall xenbus_probe_init+0x0/0xf1 returned -19 after 0 msecs
[    0.850583] calling  tty_class_init+0x0/0x31
[    0.852033] device class 'tty': registering
[    0.856096] initcall tty_class_init+0x0/0x31 returned 0 after 3 msecs
[    0.864033] calling  vtconsole_class_init+0x0/0xc3
[    0.868034] device class 'vtconsole': registering
[    0.872096] device: 'vtcon0': device_add
[    0.876056] PM: Adding info for No Bus:vtcon0
[    0.880096] initcall vtconsole_class_init+0x0/0xc3 returned 0 after 11 msecs
[    0.886496] calling  register_node_type+0x0/0x45
[    0.888033] Registering sysdev class 'node'
[    0.892096] initcall register_node_type+0x0/0x45 returned 0 after 3 msecs
[    0.898410] calling  amd_postcore_init+0x0/0x859
[    0.900033] initcall amd_postcore_init+0x0/0x859 returned 0 after 0 msecs
[    0.908034] calling  arch_kdebugfs_init+0x0/0x24
[    0.912039] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 msecs
[    0.920033] calling  mtrr_if_init+0x0/0x94
[    0.924038] initcall mtrr_if_init+0x0/0x94 returned 0 after 0 msecs
[    0.932033] calling  acpi_pci_init+0x0/0x57
[    0.936039] ACPI: bus type pci registered
[    0.940033] initcall acpi_pci_init+0x0/0x57 returned 0 after 3 msecs
[    0.946410] calling  init_acpi_device_notify+0x0/0x4b
[    0.948033] initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs
[    0.954413] calling  setup_vcpu_hotplug_event+0x0/0x22
[    0.956033] initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 msecs
[    0.962587] calling  dmi_id_init+0x0/0x2f0
[    0.964036] device class 'dmi': registering
[    0.968096] device: 'id': device_add
[    0.971686] PM: Adding info for No Bus:id
[    0.972096] initcall dmi_id_init+0x0/0x2f0 returned 0 after 7 msecs
[    0.980033] calling  pci_arch_init+0x0/0x4e
[    0.984055] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[    0.988033] PCI: Not using MMCONFIG.
[    0.992034] PCI: Using configuration type 1 for base access
[    0.996039] initcall pci_arch_init+0x0/0x4e returned 0 after 11 msecs
[    1.002497] calling  topology_init+0x0/0x7b
[    1.004033] Registering sys device of class 'node'
[    1.008037] Registering sys device 'node0'
[    1.012096] Registering sys device of class 'cpu'
[    1.016037] Registering sys device 'cpu0'
[    1.020096] Registering sys device of class 'cpu'
[    1.024037] Registering sys device 'cpu1'
[    1.028096] initcall topology_init+0x0/0x7b returned 0 after 22 msecs
[    1.036033] calling  mtrr_init_finialize+0x0/0x3d
[    1.040034] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 msecs
[    1.048033] calling  param_sysfs_init+0x0/0x1d6
[    1.086385] initcall param_sysfs_init+0x0/0x1d6 returned 0 after 30 msecs
[    1.092476] calling  pm_sysrq_init+0x0/0x1e
[    1.096056] initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs
[    1.104034] calling  readahead_init+0x0/0x38
[    1.108061] device: 'default': device_add
[    1.112054] PM: Adding info for No Bus:default
[    1.116091] initcall readahead_init+0x0/0x38 returned 0 after 7 msecs
[    1.122411] calling  init_bio+0x0/0xca
[    1.128305] initcall init_bio+0x0/0xca returned 0 after 0 msecs
[    1.132523] calling  integrity_init+0x0/0x3a
[    1.140159] initcall integrity_init+0x0/0x3a returned 0 after 0 msecs
[    1.144592] calling  blk_settings_init+0x0/0x2a
[    1.152105] initcall blk_settings_init+0x0/0x2a returned 0 after 0 msecs
[    1.160033] calling  blk_ioc_init+0x0/0x2a
[    1.164039] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs
[    1.170409] calling  genhd_device_init+0x0/0x55
[    1.176033] device class 'block': registering
[    1.180071] initcall genhd_device_init+0x0/0x55 returned 0 after 3 msecs
[    1.186410] calling  blk_dev_integrity_init+0x0/0x2a
[    1.192038] initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 msecs
[    1.198414] calling  pci_slot_init+0x0/0x4a
[    1.204039] initcall pci_slot_init+0x0/0x4a returned 0 after 0 msecs
[    1.208033] calling  fbmem_init+0x0/0x91
[    1.212057] device class 'graphics': registering
[    1.216097] initcall fbmem_init+0x0/0x91 returned 0 after 3 msecs
[    1.224034] calling  acpi_init+0x0/0x221
[    1.229169] evgpeblk-0957 [04] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
[    1.236203] ACPI: EC: Look up EC in DSDT
[    1.246704] Completing Region/Field/Buffer/Package initialization:.................................................................................
[    1.269987] Initialized 26/32 Regions 0/0 Fields 25/25 Buffers 30/30 Packages (568 nodes)
[    1.276034] Initializing Device/Processor/Thermal objects by executing _INI methods:.
[    1.284305] Executed 1 _INI methods requiring 0 _STA executions (examined 61 objects)
[    1.293480] evgpeblk-1054 [03] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 2 Runtime GPEs in this block
[    1.304108] ACPI: Interpreter enabled
[    1.308033] ACPI: (supports S0 S5)
[    1.312655] ACPI: Using IOAPIC for interrupt routing
[    1.316127] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[    1.333006] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[    1.340034] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    1.350852] PCI: Using MMCONFIG at f0000000 - f3ffffff
[    1.356034] initcall acpi_init+0x0/0x221 returned 0 after 122 msecs
[    1.360033] calling  acpi_scan_init+0x0/0x110
[    1.368097] bus: 'acpi': registered
[    1.368097] device: 'LNXSYSTM:00': device_add
[    1.376041] bus: 'acpi': add device LNXSYSTM:00
[    1.380044] PM: Adding info for acpi:LNXSYSTM:00
[    1.384091] device: 'LNXPWRBN:00': device_add
[    1.388039] bus: 'acpi': add device LNXPWRBN:00
[    1.392050] PM: Adding info for acpi:LNXPWRBN:00
[    1.396092] device: 'ACPI0007:00': device_add
[    1.400040] bus: 'acpi': add device ACPI0007:00
[    1.404043] PM: Adding info for acpi:ACPI0007:00
[    1.412091] device: 'ACPI0007:01': device_add
[    1.416040] bus: 'acpi': add device ACPI0007:01
[    1.420043] PM: Adding info for acpi:ACPI0007:01
[    1.424090] device: 'ACPI0007:02': device_add
[    1.428040] bus: 'acpi': add device ACPI0007:02
[    1.432049] PM: Adding info for acpi:ACPI0007:02
[    1.440090] device: 'ACPI0007:03': device_add
[    1.444048] bus: 'acpi': add device ACPI0007:03
[    1.448044] PM: Adding info for acpi:ACPI0007:03
[    1.452141] device: 'device:00': device_add
[    1.456040] bus: 'acpi': add device device:00
[    1.460043] PM: Adding info for acpi:device:00
[    1.464041] device: 'device:00': dev_uevent: bus uevent() returned -12
[    1.472236] device: 'PNP0C0E:00': device_add
[    1.476046] bus: 'acpi': add device PNP0C0E:00
[    1.480044] PM: Adding info for acpi:PNP0C0E:00
[    1.484139] device: 'PNP0A03:00': device_add
[    1.492040] bus: 'acpi': add device PNP0A03:00
[    1.496043] PM: Adding info for acpi:PNP0A03:00
[    1.500144] device: 'PNP0C02:00': device_add
[    1.504040] bus: 'acpi': add device PNP0C02:00
[    1.508043] PM: Adding info for acpi:PNP0C02:00
[    1.516239] device: 'device:01': device_add
[    1.520040] bus: 'acpi': add device device:01
[    1.524043] PM: Adding info for acpi:device:01
[    1.528042] device: 'device:01': dev_uevent: bus uevent() returned -12
[    1.536126] device: 'device:02': device_add
[    1.540039] bus: 'acpi': add device device:02
[    1.544044] PM: Adding info for acpi:device:02
[    1.548041] device: 'device:02': dev_uevent: bus uevent() returned -12
[    1.552322] device: 'PNP0C0F:00': device_add
[    1.560040] bus: 'acpi': add device PNP0C0F:00
[    1.564044] PM: Adding info for acpi:PNP0C0F:00
[    1.568343] device: 'PNP0C0F:01': device_add
[    1.572040] bus: 'acpi': add device PNP0C0F:01
[    1.576044] PM: Adding info for acpi:PNP0C0F:01
[    1.580325] device: 'PNP0C0F:02': device_add
[    1.584040] bus: 'acpi': add device PNP0C0F:02
[    1.592044] PM: Adding info for acpi:PNP0C0F:02
[    1.596322] device: 'PNP0C0F:03': device_add
[    1.600040] bus: 'acpi': add device PNP0C0F:03
[    1.604050] PM: Adding info for acpi:PNP0C0F:03
[    1.608363] device: 'PNP0C0F:04': device_add
[    1.612040] bus: 'acpi': add device PNP0C0F:04
[    1.616052] PM: Adding info for acpi:PNP0C0F:04
[    1.624355] device: 'PNP0C0F:05': device_add
[    1.628040] bus: 'acpi': add device PNP0C0F:05
[    1.632044] PM: Adding info for acpi:PNP0C0F:05
[    1.636365] device: 'PNP0C0F:06': device_add
[    1.640040] bus: 'acpi': add device PNP0C0F:06
[    1.644043] PM: Adding info for acpi:PNP0C0F:06
[    1.648358] device: 'PNP0C0F:07': device_add
[    1.656041] bus: 'acpi': add device PNP0C0F:07
[    1.660044] PM: Adding info for acpi:PNP0C0F:07
[    1.664158] device: 'PNP0200:00': device_add
[    1.668040] bus: 'acpi': add device PNP0200:00
[    1.672050] PM: Adding info for acpi:PNP0200:00
[    1.676151] device: 'PNP0B00:00': device_add
[    1.680040] bus: 'acpi': add device PNP0B00:00
[    1.688044] PM: Adding info for acpi:PNP0B00:00
[    1.692149] device: 'PNP0000:00': device_add
[    1.696040] bus: 'acpi': add device PNP0000:00
[    1.700044] PM: Adding info for acpi:PNP0000:00
[    1.704154] device: 'PNP0C04:00': device_add
[    1.708050] bus: 'acpi': add device PNP0C04:00
[    1.712044] PM: Adding info for acpi:PNP0C04:00
[    1.716146] device: 'PNP0100:00': device_add
[    1.724040] bus: 'acpi': add device PNP0100:00
[    1.728044] PM: Adding info for acpi:PNP0100:00
[    1.732144] device: 'PNP0800:00': device_add
[    1.736040] bus: 'acpi': add device PNP0800:00
[    1.740044] PM: Adding info for acpi:PNP0800:00
[    1.744150] device: 'PNP0C02:01': device_add
[    1.748040] bus: 'acpi': add device PNP0C02:01
[    1.752044] PM: Adding info for acpi:PNP0C02:01
[    1.760780] device: 'PNP0700:00': device_add
[    1.764041] bus: 'acpi': add device PNP0700:00
[    1.768044] PM: Adding info for acpi:PNP0700:00
[    1.772866] device: 'PNP0401:00': device_add
[    1.776049] bus: 'acpi': add device PNP0401:00
[    1.780050] PM: Adding info for acpi:PNP0401:00
[    1.788310] device: 'PNP0F03:00': device_add
[    1.792041] bus: 'acpi': add device PNP0F03:00
[    1.796044] PM: Adding info for acpi:PNP0F03:00
[    1.800307] device: 'PNP0303:00': device_add
[    1.804041] bus: 'acpi': add device PNP0303:00
[    1.808044] PM: Adding info for acpi:PNP0303:00
[    1.812687] device: 'PNP0501:00': device_add
[    1.820041] bus: 'acpi': add device PNP0501:00
[    1.824044] PM: Adding info for acpi:PNP0501:00
[    1.828405] device: 'device:03': device_add
[    1.832041] bus: 'acpi': add device device:03
[    1.836044] PM: Adding info for acpi:device:03
[    1.840042] device: 'device:03': dev_uevent: bus uevent() returned -12
[    1.848251] device: 'device:04': device_add
[    1.852040] bus: 'acpi': add device device:04
[    1.856044] PM: Adding info for acpi:device:04
[    1.860041] device: 'device:04': dev_uevent: bus uevent() returned -12
[    1.868255] device: 'device:05': device_add
[    1.872040] bus: 'acpi': add device device:05
[    1.876044] PM: Adding info for acpi:device:05
[    1.880041] device: 'device:05': dev_uevent: bus uevent() returned -12
[    1.888247] device: 'device:06': device_add
[    1.892040] bus: 'acpi': add device device:06
[    1.896044] PM: Adding info for acpi:device:06
[    1.900041] device: 'device:06': dev_uevent: bus uevent() returned -12
[    1.908244] device: 'device:07': device_add
[    1.912040] bus: 'acpi': add device device:07
[    1.916044] PM: Adding info for acpi:device:07
[    1.920041] device: 'device:07': dev_uevent: bus uevent() returned -12
[    1.928058] device: 'device:08': device_add
[    1.932050] bus: 'acpi': add device device:08
[    1.936044] PM: Adding info for acpi:device:08
[    1.940042] device: 'device:08': dev_uevent: bus uevent() returned -12
[    1.948141] device: 'PNP0003:00': device_add
[    1.952039] bus: 'acpi': add device PNP0003:00
[    1.956044] PM: Adding info for acpi:PNP0003:00
[    1.960495] device: 'device:09': device_add
[    1.964044] bus: 'acpi': add device device:09
[    1.968052] PM: Adding info for acpi:device:09
[    1.976042] device: 'device:09': dev_uevent: bus uevent() returned -12
[    1.980366] device: 'device:0a': device_add
[    1.984046] bus: 'acpi': add device device:0a
[    1.988053] PM: Adding info for acpi:device:0a
[    1.992042] device: 'device:0a': dev_uevent: bus uevent() returned -12
[    2.004411] device: 'device:0b': device_add
[    2.008040] bus: 'acpi': add device device:0b
[    2.012044] PM: Adding info for acpi:device:0b
[    2.016041] device: 'device:0b': dev_uevent: bus uevent() returned -12
[    2.024407] device: 'device:0c': device_add
[    2.028043] bus: 'acpi': add device device:0c
[    2.032044] PM: Adding info for acpi:device:0c
[    2.036042] device: 'device:0c': dev_uevent: bus uevent() returned -12
[    2.044417] device: 'device:0d': device_add
[    2.048040] bus: 'acpi': add device device:0d
[    2.056050] PM: Adding info for acpi:device:0d
[    2.060042] device: 'device:0d': dev_uevent: bus uevent() returned -12
[    2.064401] device: 'device:0e': device_add
[    2.068040] bus: 'acpi': add device device:0e
[    2.076044] PM: Adding info for acpi:device:0e
[    2.080041] device: 'device:0e': dev_uevent: bus uevent() returned -12
[    2.084397] device: 'device:0f': device_add
[    2.088040] bus: 'acpi': add device device:0f
[    2.096044] PM: Adding info for acpi:device:0f
[    2.100041] device: 'device:0f': dev_uevent: bus uevent() returned -12
[    2.104148] device: 'device:10': device_add
[    2.108040] bus: 'acpi': add device device:10
[    2.112051] PM: Adding info for acpi:device:10
[    2.120042] device: 'device:10': dev_uevent: bus uevent() returned -12
[    2.124188] device: 'device:11': device_add
[    2.128039] bus: 'acpi': add device device:11
[    2.132044] PM: Adding info for acpi:device:11
[    2.140042] device: 'device:11': dev_uevent: bus uevent() returned -12
[    2.144141] device: 'device:12': device_add
[    2.148039] bus: 'acpi': add device device:12
[    2.152044] PM: Adding info for acpi:device:12
[    2.156042] device: 'device:12': dev_uevent: bus uevent() returned -12
[    2.164139] device: 'device:13': device_add
[    2.168039] bus: 'acpi': add device device:13
[    2.172044] PM: Adding info for acpi:device:13
[    2.176042] device: 'device:13': dev_uevent: bus uevent() returned -12
[    2.184154] device: 'device:14': device_add
[    2.188040] bus: 'acpi': add device device:14
[    2.192044] PM: Adding info for acpi:device:14
[    2.196042] device: 'device:14': dev_uevent: bus uevent() returned -12
[    2.204141] device: 'device:15': device_add
[    2.208048] bus: 'acpi': add device device:15
[    2.212045] PM: Adding info for acpi:device:15
[    2.216042] device: 'device:15': dev_uevent: bus uevent() returned -12
[    2.224137] device: 'device:16': device_add
[    2.228039] bus: 'acpi': add device device:16
[    2.232044] PM: Adding info for acpi:device:16
[    2.236042] device: 'device:16': dev_uevent: bus uevent() returned -12
[    2.244134] device: 'device:17': device_add
[    2.248045] bus: 'acpi': add device device:17
[    2.252045] PM: Adding info for acpi:device:17
[    2.256042] device: 'device:17': dev_uevent: bus uevent() returned -12
[    2.264133] device: 'device:18': device_add
[    2.268039] bus: 'acpi': add device device:18
[    2.272044] PM: Adding info for acpi:device:18
[    2.276042] device: 'device:18': dev_uevent: bus uevent() returned -12
[    2.284129] device: 'device:19': device_add
[    2.288039] bus: 'acpi': add device device:19
[    2.292044] PM: Adding info for acpi:device:19
[    2.296042] device: 'device:19': dev_uevent: bus uevent() returned -12
[    2.304129] device: 'device:1a': device_add
[    2.308039] bus: 'acpi': add device device:1a
[    2.312051] PM: Adding info for acpi:device:1a
[    2.316042] device: 'device:1a': dev_uevent: bus uevent() returned -12
[    2.320080] device: 'LNXTHERM:00': device_add
[    2.328039] bus: 'acpi': add device LNXTHERM:00
[    2.332044] PM: Adding info for acpi:LNXTHERM:00
[    2.336090] initcall acpi_scan_init+0x0/0x110 returned 0 after 923 msecs
[    2.342585] calling  acpi_ec_init+0x0/0x61
[    2.348039] bus: 'acpi': add driver ec
[    2.352156] initcall acpi_ec_init+0x0/0x61 returned 0 after 3 msecs
[    2.356033] calling  acpi_pci_root_init+0x0/0x28
[    2.360033] bus: 'acpi': add driver pci_root
[    2.364046] bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root
[    2.376033] bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00
[    2.384052] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    2.388086] device: 'pci0000:00': device_add
[    2.392058] PM: Adding info for No Bus:pci0000:00
[    2.396034] device: '0000:00': device_add
[    2.400051] PM: Adding info for No Bus:0000:00
[    2.404088] PCI: Scanning bus 0000:00
[    2.408054] pci 0000:00:00.0: found [8086/277c] class 000600 header type 00
[    2.416060] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.424056] pci 0000:00:01.0: found [8086/277d] class 000604 header type 01
[    2.428050] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.436038] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    2.444034] pci 0000:00:01.0: PME# disabled
[    2.448083] pci 0000:00:1b.0: found [8086/27d8] class 000403 header type 00
[    2.452044] PCI: 0000:00:1b.0 reg 10 64bit mmio: [50400000, 50403fff]
[    2.460066] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.467454] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    2.472035] pci 0000:00:1b.0: PME# disabled
[    2.476048] pci 0000:00:1c.0: found [8086/27d0] class 000604 header type 01
[    2.484063] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.492044] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    2.496035] pci 0000:00:1c.0: PME# disabled
[    2.500053] pci 0000:00:1c.4: found [8086/27e0] class 000604 header type 01
[    2.508059] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.520043] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    2.524035] pci 0000:00:1c.4: PME# disabled
[    2.528048] pci 0000:00:1c.5: found [8086/27e2] class 000604 header type 01
[    2.536059] pci 0000:00:1c.5: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.544044] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    2.548035] pci 0000:00:1c.5: PME# disabled
[    2.552046] pci 0000:00:1d.0: found [8086/27c8] class 000c03 header type 00
[    2.560059] PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f]
[    2.564046] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.572045] pci 0000:00:1d.1: found [8086/27c9] class 000c03 header type 00
[    2.580059] PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f]
[    2.584046] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.592045] pci 0000:00:1d.2: found [8086/27ca] class 000c03 header type 00
[    2.600059] PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f]
[    2.604046] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.611462] pci 0000:00:1d.3: found [8086/27cb] class 000c03 header type 00
[    2.620059] PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f]
[    2.624046] pci 0000:00:1d.3: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.632067] pci 0000:00:1d.7: found [8086/27cc] class 000c03 header type 00
[    2.636041] PCI: 0000:00:1d.7 reg 10 32bit mmio: [50404400, 504047ff]
[    2.644074] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.651455] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    2.656036] pci 0000:00:1d.7: PME# disabled
[    2.660052] pci 0000:00:1e.0: found [8086/244e] class 000604 header type 01
[    2.668052] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.676063] pci 0000:00:1f.0: found [8086/27b0] class 000601 header type 00
[    2.684085] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.688049] pci 0000:00:1f.1: found [8086/27df] class 000101 header type 00
[    2.696041] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[    2.700038] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[    2.708038] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[    2.712038] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[    2.716038] PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf]
[    2.724048] pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.728068] pci 0000:00:1f.2: found [8086/27c0] class 000101 header type 00
[    2.736040] PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf]
[    2.740040] PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7]
[    2.748037] PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7]
[    2.752037] PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3]
[    2.760037] PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af]
[    2.764037] PCI: 0000:00:1f.2 reg 24 32bit mmio: [50404000, 504043ff]
[    2.772045] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.776037] pci 0000:00:1f.2: PME# supported from D3hot
[    2.784035] pci 0000:00:1f.2: PME# disabled
[    2.788046] pci 0000:00:1f.3: found [8086/27da] class 000c05 header type 00
[    2.792065] PCI: 0000:00:1f.3 reg 20 io port: [4000, 401f]
[    2.800050] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2f
[    2.808039] PCI: Fixups for bus 0000:00
[    2.808039] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0
[    2.816039] PCI: Scanning bus 0000:01
[    2.820051] pci 0000:01:00.0: found [1002/7249] class 000300 header type 00
[    2.828033] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x20
[    2.832039] PCI: 0000:01:00.0 reg 10 32bit mmio: [40000000, 4fffffff]
[    2.840045] PCI: 0000:01:00.0 reg 18 64bit mmio: [50300000, 5030ffff]
[    2.848037] PCI: 0000:01:00.0 reg 20 io port: [3000, 30ff]
[    2.852041] PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]
[    2.860047] pci 0000:01:00.0: supports D1
[    2.864033] pci 0000:01:00.0: supports D2
[    2.868051] pci 0000:01:00.1: found [1002/7269] class 000380 header type 00
[    2.872033] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x20
[    2.878333] PCI: 0000:01:00.1 reg 10 64bit mmio: [50310000, 5031ffff]
[    2.884065] pci 0000:01:00.1: supports D1
[    2.888033] pci 0000:01:00.1: supports D2
[    2.892046] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force'
[    2.904065] PCI: Fixups for bus 0000:01
[    2.908034] PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
[    2.916034] PCI: bridge 0000:00:01.0 32bit mmio: [50300000, 503fffff]
[    2.920036] PCI: bridge 0000:00:01.0 64bit mmio pref: [40000000, 4fffffff]
[    2.928033] PCI: Bus scan for 0000:01 returning with max=01
[    2.932035] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0
[    2.940040] PCI: Scanning bus 0000:02
[    2.944061] pci 0000:02:00.0: found [1131/7162] class 000480 header type 00
[    2.952050] PCI: 0000:02:00.0 reg 10 64bit mmio: [50200000, 502fffff]
[    2.956100] pci 0000:02:00.0: supports D1
[    2.960033] pci 0000:02:00.0: supports D2
[    2.964033] pci 0000:02:00.0: PME# supported from D0 D1 D2
[    2.972036] pci 0000:02:00.0: PME# disabled
[    2.976044] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled forcedly with 'pcie_aspm=force'
[    2.988065] PCI: Fixups for bus 0000:02
[    2.992037] PCI: bridge 0000:00:1c.0 32bit mmio: [50200000, 502fffff]
[    2.996040] PCI: Bus scan for 0000:02 returning with max=02
[    3.004035] pci 0000:00:1c.4: scanning behind bridge, config 030300, pass 0
[    3.008040] PCI: Scanning bus 0000:03
[    3.012066] PCI: Fixups for bus 0000:03
[    3.016042] PCI: Bus scan for 0000:03 returning with max=03
[    3.024035] pci 0000:00:1c.5: scanning behind bridge, config 040400, pass 0
[    3.036040] PCI: Scanning bus 0000:04
[    3.036081] pci 0000:04:00.0: found [8086/109a] class 000200 header type 00
[    3.044048] PCI: 0000:04:00.0 reg 10 32bit mmio: [50100000, 5011ffff]
[    3.052055] PCI: 0000:04:00.0 reg 18 io port: [2000, 201f]
[    3.056097] pci 0000:04:00.0: calling pci_fixup_transparent_bridge+0x0/0x2f
[    3.064043] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    3.072038] pci 0000:04:00.0: PME# disabled
[    3.076053] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.5. It can be enabled forcedly with 'pcie_aspm=force'
[    3.084065] PCI: Fixups for bus 0000:04
[    3.088035] PCI: bridge 0000:00:1c.5 io port: [2000, 2fff]
[    3.096035] PCI: bridge 0000:00:1c.5 32bit mmio: [50100000, 501fffff]
[    3.100037] PCI: Bus scan for 0000:04 returning with max=04
[    3.108035] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 0
[    3.112040] PCI: Scanning bus 0000:05
[    3.116059] pci 0000:05:02.0: found [1814/0301] class 000280 header type 00
[    3.124041] PCI: 0000:05:02.0 reg 10 32bit mmio: [50000000, 50007fff]
[    3.132105] pci 0000:05:04.0: found [104c/8024] class 000c00 header type 00
[    3.136042] PCI: 0000:05:04.0 reg 10 32bit mmio: [5000c000, 5000c7ff]
[    3.144038] PCI: 0000:05:04.0 reg 14 32bit mmio: [50008000, 5000bfff]
[    3.152075] pci 0000:05:04.0: supports D1
[    3.156033] pci 0000:05:04.0: supports D2
[    3.160033] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot
[    3.164036] pci 0000:05:04.0: PME# disabled
[    3.168057] pci 0000:05:05.0: found [1095/3114] class 000104 header type 00
[    3.176041] PCI: 0000:05:05.0 reg 10 io port: [1018, 101f]
[    3.180038] PCI: 0000:05:05.0 reg 14 io port: [1024, 1027]
[    3.188038] PCI: 0000:05:05.0 reg 18 io port: [1010, 1017]
[    3.192038] PCI: 0000:05:05.0 reg 1c io port: [1020, 1023]
[    3.200038] PCI: 0000:05:05.0 reg 20 io port: [1000, 100f]
[    3.204038] PCI: 0000:05:05.0 reg 24 32bit mmio: [5000c800, 5000cbff]
[    3.212038] PCI: 0000:05:05.0 reg 30 32bit mmio: [fff80000, ffffffff]
[    3.216047] pci 0000:05:05.0: supports D1
[    3.220033] pci 0000:05:05.0: supports D2
[    3.224068] PCI: Fixups for bus 0000:05
[    3.228033] pci 0000:00:1e.0: transparent bridge
[    3.232035] PCI: bridge 0000:00:1e.0 io port: [1000, 1fff]
[    3.240035] PCI: bridge 0000:00:1e.0 32bit mmio: [50000000, 500fffff]
[    3.244037] PCI: Bus scan for 0000:05 returning with max=05
[    3.252038] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1
[    3.256036] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1
[    3.264037] pci 0000:00:1c.4: scanning behind bridge, config 030300, pass 1
[    3.272037] pci 0000:00:1c.5: scanning behind bridge, config 040400, pass 1
[    3.280037] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 1
[    3.284036] PCI: Bus scan for 0000:00 returning with max=05
[    3.292043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    3.300657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    3.308440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    3.316743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    3.320725] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    3.328785] device: '0000:00:00.0': device_add
[    3.332803] bus: 'pci': add device 0000:00:00.0
[    3.340072] PM: Adding info for pci:0000:00:00.0
[    3.344093] device: '0000:00:01.0': device_add
[    3.348789] bus: 'pci': add device 0000:00:01.0
[    3.352074] PM: Adding info for pci:0000:00:01.0
[    3.360056] device: '0000:00:1b.0': device_add
[    3.364264] bus: 'pci': add device 0000:00:1b.0
[    3.368065] PM: Adding info for pci:0000:00:1b.0
[    3.372092] device: '0000:00:1c.0': device_add
[    3.377052] bus: 'pci': add device 0000:00:1c.0
[    3.384066] PM: Adding info for pci:0000:00:1c.0
[    3.388092] device: '0000:00:1c.4': device_add
[    3.393036] bus: 'pci': add device 0000:00:1c.4
[    3.396072] PM: Adding info for pci:0000:00:1c.4
[    3.404092] device: '0000:00:1c.5': device_add
[    3.408578] bus: 'pci': add device 0000:00:1c.5
[    3.412072] PM: Adding info for pci:0000:00:1c.5
[    3.416092] device: '0000:00:1d.0': device_add
[    3.421015] bus: 'pci': add device 0000:00:1d.0
[    3.428073] PM: Adding info for pci:0000:00:1d.0
[    3.432092] device: '0000:00:1d.1': device_add
[    3.437005] bus: 'pci': add device 0000:00:1d.1
[    3.440072] PM: Adding info for pci:0000:00:1d.1
[    3.448092] device: '0000:00:1d.2': device_add
[    3.452811] bus: 'pci': add device 0000:00:1d.2
[    3.456072] PM: Adding info for pci:0000:00:1d.2
[    3.460092] device: '0000:00:1d.3': device_add
[    3.464984] bus: 'pci': add device 0000:00:1d.3
[    3.472080] PM: Adding info for pci:0000:00:1d.3
[    3.476092] device: '0000:00:1d.7': device_add
[    3.480973] bus: 'pci': add device 0000:00:1d.7
[    3.488066] PM: Adding info for pci:0000:00:1d.7
[    3.492091] device: '0000:00:1e.0': device_add
[    3.496952] bus: 'pci': add device 0000:00:1e.0
[    3.500067] PM: Adding info for pci:0000:00:1e.0
[    3.504092] device: '0000:00:1f.0': device_add
[    3.512956] bus: 'pci': add device 0000:00:1f.0
[    3.516072] PM: Adding info for pci:0000:00:1f.0
[    3.520092] device: '0000:00:1f.1': device_add
[    3.524941] bus: 'pci': add device 0000:00:1f.1
[    3.532072] PM: Adding info for pci:0000:00:1f.1
[    3.536092] device: '0000:00:1f.2': device_add
[    3.540944] bus: 'pci': add device 0000:00:1f.2
[    3.548088] PM: Adding info for pci:0000:00:1f.2
[    3.552091] device: '0000:00:1f.3': device_add
[    3.556911] bus: 'pci': add device 0000:00:1f.3
[    3.560076] PM: Adding info for pci:0000:00:1f.3
[    3.568091] device: '0000:01:00.0': device_add
[    3.572040] bus: 'pci': add device 0000:01:00.0
[    3.576071] PM: Adding info for pci:0000:01:00.0
[    3.580091] device: '0000:01:00.1': device_add
[    3.584040] bus: 'pci': add device 0000:01:00.1
[    3.588065] PM: Adding info for pci:0000:01:00.1
[    3.596091] device: '0000:01': device_add
[    3.600058] PM: Adding info for No Bus:0000:01
[    3.604090] device: '0000:02:00.0': device_add
[    3.608049] bus: 'pci': add device 0000:02:00.0
[    3.612071] PM: Adding info for pci:0000:02:00.0
[    3.616091] device: '0000:02': device_add
[    3.620053] PM: Adding info for No Bus:0000:02
[    3.624090] device: '0000:03': device_add
[    3.628053] PM: Adding info for No Bus:0000:03
[    3.632090] device: '0000:04:00.0': device_add
[    3.640042] bus: 'pci': add device 0000:04:00.0
[    3.644071] PM: Adding info for pci:0000:04:00.0
[    3.648091] device: '0000:04': device_add
[    3.652062] PM: Adding info for No Bus:0000:04
[    3.656090] device: '0000:05:02.0': device_add
[    3.660041] bus: 'pci': add device 0000:05:02.0
[    3.664072] PM: Adding info for pci:0000:05:02.0
[    3.668091] device: '0000:05:04.0': device_add
[    3.676042] bus: 'pci': add device 0000:05:04.0
[    3.680072] PM: Adding info for pci:0000:05:04.0
[    3.684091] device: '0000:05:05.0': device_add
[    3.688042] bus: 'pci': add device 0000:05:05.0
[    3.692071] PM: Adding info for pci:0000:05:05.0
[    3.696091] device: '0000:05': device_add
[    3.700052] PM: Adding info for No Bus:0000:05
[    3.704090] driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root'
[    3.712034] bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root
[    3.720147] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 1296 msecs
[    3.728033] calling  acpi_pci_link_init+0x0/0x48
[    3.732034] bus: 'acpi': add driver pci_link
[    3.736051] bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link
[    3.744033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00
[    3.752328] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    3.760746] driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link'
[    3.768037] bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link
[    3.776034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link
[    3.784033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01
[    3.792308] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    3.798453] driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link'
[    3.804034] bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link
[    3.812034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link
[    3.820033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02
[    3.828307] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[    3.836450] driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link'
[    3.844034] bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link
[    3.852034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link
[    3.860033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03
[    3.868308] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[    3.874452] driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link'
[    3.880034] bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link
[    3.888034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:04 with driver pci_link
[    3.896033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:04
[    3.904314] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    3.913616] driver: 'PNP0C0F:04': driver_bound: bound to device 'pci_link'
[    3.920034] bus: 'acpi': really_probe: bound device PNP0C0F:04 to driver pci_link
[    3.928034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:05 with driver pci_link
[    3.936033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:05
[    3.948306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    3.955238] driver: 'PNP0C0F:05': driver_bound: bound to device 'pci_link'
[    3.960034] bus: 'acpi': really_probe: bound device PNP0C0F:05 to driver pci_link
[    3.968034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:06 with driver pci_link
[    3.976033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:06
[    3.984306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[    3.993039] driver: 'PNP0C0F:06': driver_bound: bound to device 'pci_link'
[    4.000034] bus: 'acpi': really_probe: bound device PNP0C0F:06 to driver pci_link
[    4.008034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:07 with driver pci_link
[    4.016033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:07
[    4.024178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    4.030455] driver: 'PNP0C0F:07': driver_bound: bound to device 'pci_link'
[    4.036034] bus: 'acpi': really_probe: bound device PNP0C0F:07 to driver pci_link
[    4.044133] initcall acpi_pci_link_init+0x0/0x48 returned 0 after 297 msecs
[    4.054585] calling  acpi_power_init+0x0/0x77
[    4.060038] bus: 'acpi': add driver power
[    4.064156] initcall acpi_power_init+0x0/0x77 returned 0 after 3 msecs
[    4.068033] calling  acpi_system_init+0x0/0x25f
[    4.072190] initcall acpi_system_init+0x0/0x25f returned 0 after 3 msecs
[    4.080033] calling  acpi_debug_init+0x0/0xa5
[    4.084050] initcall acpi_debug_init+0x0/0xa5 returned 0 after 0 msecs
[    4.092033] calling  acpi_wmi_init+0x0/0x4f
[    4.096034] bus: 'acpi': add driver wmi
[    4.100156] ACPI: WMI: Mapper loaded
[    4.104035] initcall acpi_wmi_init+0x0/0x4f returned 0 after 7 msecs
[    4.110409] calling  acpi_cm_sbs_init+0x0/0x8
[    4.116033] initcall acpi_cm_sbs_init+0x0/0x8 returned 0 after 0 msecs
[    4.120032] calling  pnp_init+0x0/0x20
[    4.124033] Linux Plug and Play Support v0.97 (c) Adam Belay
[    4.132091] bus: 'pnp': registered
[    4.132091] initcall pnp_init+0x0/0x20 returned 0 after 7 msecs
[    4.140033] calling  pnpacpi_init+0x0/0x8c
[    4.144033] pnp: PnP ACPI init
[    4.147106] device: 'pnp0': device_add
[    4.152043] PM: Adding info for No Bus:pnp0
[    4.156034] ACPI: bus type pnp registered
[    4.160071] pnp 00:00: parse allocated resources
[    4.170505] pnp 00:00:   add io  0xcf8-0xcff flags 0x1
[    4.176037] device: '00:00': device_add
[    4.180070] bus: 'pnp': add device 00:00
[    4.184044] PM: Adding info for pnp:00:00
[    4.188089] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    4.193783] pnp 00:01: parse allocated resources
[    4.200051] pnp 00:01:   add mem 0xf0000000-0xf3ffffff flags 0x0
[    4.204034] pnp 00:01:   add mem 0xfed13000-0xfed13fff flags 0x0
[    4.212034] pnp 00:01:   add mem 0xfed14000-0xfed17fff flags 0x0
[    4.216034] pnp 00:01:   add mem 0xfed18000-0xfed18fff flags 0x0
[    4.224034] pnp 00:01:   add mem 0xfed19000-0xfed19fff flags 0x0
[    4.228034] pnp 00:01:   add mem 0xfed1c000-0xfed1ffff flags 0x0
[    4.236034] pnp 00:01:   add mem 0xfed20000-0xfed3ffff flags 0x0
[    4.240034] pnp 00:01:   add mem 0xfed45000-0xfed99fff flags 0x0
[    4.248034] pnp 00:01:   add mem 0xc0000-0xdffff flags 0x0
[    4.252034] pnp 00:01:   add mem 0xe0000-0xfffff flags 0x0
[    4.256036] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x17c
[    4.264113] device: '00:01': device_add
[    4.268059] bus: 'pnp': add device 00:01
[    4.272044] PM: Adding info for pnp:00:01
[    4.276088] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.284640] pnp 00:02: parse allocated resources
[    4.288044] pnp 00:02:   add io  0x0-0xf flags 0x1
[    4.292034] pnp 00:02:   add io  0x81-0x83 flags 0x1
[    4.300034] pnp 00:02:   add io  0x87-0x87 flags 0x1
[    4.304034] pnp 00:02:   add io  0x89-0x8b flags 0x1
[    4.308034] pnp 00:02:   add io  0x8f-0x8f flags 0x1
[    4.312034] pnp 00:02:   add io  0xc0-0xdf flags 0x1
[    4.320034] pnp 00:02:   add dma 4 flags 0x0
[    4.324035] device: '00:02': device_add
[    4.328060] bus: 'pnp': add device 00:02
[    4.332059] PM: Adding info for pnp:00:02
[    4.336088] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    4.341776] pnp 00:03: parse allocated resources
[    4.344044] pnp 00:03:   add io  0x70-0x71 flags 0x1
[    4.352034] pnp 00:03:   add io  0x74-0x77 flags 0x1
[    4.356037] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[    4.364037] pnp 00:03:   add irq 8 flags 0x1
[    4.368036] device: '00:03': device_add
[    4.371920] bus: 'pnp': add device 00:03
[    4.376044] PM: Adding info for pnp:00:03
[    4.380088] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    4.385784] pnp 00:04: parse allocated resources
[    4.392044] pnp 00:04:   add io  0xf0-0xf0 flags 0x1
[    4.396035] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[    4.404036] pnp 00:04:   add irq 13 flags 0x1
[    4.408036] device: '00:04': device_add
[    4.412062] bus: 'pnp': add device 00:04
[    4.416008] PM: Adding info for pnp:00:04
[    4.420088] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    4.425784] pnp 00:05: parse allocated resources
[    4.432043] pnp 00:05:   add io  0x61-0x61 flags 0x1
[    4.436036] device: '00:05': device_add
[    4.440064] bus: 'pnp': add device 00:05
[    4.444050] PM: Adding info for pnp:00:05
[    4.448088] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    4.453774] pnp 00:06: parse allocated resources
[    4.460046] pnp 00:06:   add io  0x500-0x53f flags 0x1
[    4.464040] pnp 00:06:   add io  0x400-0x47f flags 0x1
[    4.468034] pnp 00:06:   add io  0x92-0x92 flags 0x1
[    4.476034] pnp 00:06:   add io  0x680-0x6ff flags 0x1
[    4.480034] pnp 00:06:   add io  0x10-0x1f flags 0x1
[    4.484034] pnp 00:06:   add io  0x72-0x73 flags 0x1
[    4.488034] pnp 00:06:   add io  0x80-0x80 flags 0x1
[    4.496034] pnp 00:06:   add io  0x84-0x86 flags 0x1
[    4.500035] pnp 00:06:   add io  0x88-0x88 flags 0x1
[    4.504034] pnp 00:06:   add io  0x8c-0x8e flags 0x1
[    4.508034] pnp 00:06:   add io  0x90-0x9f flags 0x1
[    4.516035] pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x17c
[    4.520112] device: '00:06': device_add
[    4.524065] bus: 'pnp': add device 00:06
[    4.528044] PM: Adding info for pnp:00:06
[    4.532088] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.540401] pnp 00:07: parse allocated resources
[    4.544889] pnp 00:07:   add io  0x3f0-0x3f5 flags 0x1
[    4.552034] pnp 00:07:   add io  0x3f0-0x3f0 flags 0x1
[    4.556035] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[    4.564036] pnp 00:07:   add irq 6 flags 0x1
[    4.572034] pnp 00:07:   add dma 2 flags 0x0
[    4.576034] pnp 00:07: parse resource options
[    4.580128] pnp 00:07:   dependent set 0 (preferred) io  min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[    4.588035] pnp 00:07:   dependent set 0 (preferred) io  min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[    4.596035] pnp 00:07:   dependent set 0 (preferred) irq 6 flags 0x1
[    4.604034] pnp 00:07:   dependent set 0 (preferred) dma 2 (bitmask 0x4) flags 0x0
[    4.612035] device: '00:07': device_add
[    4.616066] bus: 'pnp': add device 00:07
[    4.620050] PM: Adding info for pnp:00:07
[    4.624088] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    4.630200] pnp 00:08: parse allocated resources
[    4.636538] pnp 00:08:   add io  0x378-0x37f flags 0x1
[    4.640034] pnp 00:08:   add io  0x778-0x77f flags 0x1
[    4.648035] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[    4.652036] pnp 00:08:   add irq 7 flags 0x1
[    4.656034] pnp 00:08:   add dma 0 flags 0x10000000
[    4.664034] pnp 00:08: parse resource options
[    4.668134] pnp 00:08:   dependent set 0 (preferred) io  min 0x378 max 0x378 align 1 size 8 flags 0x1
[    4.676035] pnp 00:08:   dependent set 0 (preferred) io  min 0x778 max 0x778 align 1 size 8 flags 0x1
[    4.684041] pnp 00:08:   dependent set 0 (preferred) irq 5 7 flags 0x1
[    4.692035] pnp 00:08:   dependent set 0 (preferred) dma 1 3 (bitmask 0xa) flags 0x0
[    4.700034] pnp 00:08:   dependent set 1 (preferred) io  min 0x278 max 0x278 align 1 size 8 flags 0x1
[    4.708034] pnp 00:08:   dependent set 1 (preferred) io  min 0x678 max 0x678 align 1 size 8 flags 0x1
[    4.720035] pnp 00:08:   dependent set 1 (preferred) irq 5 7 flags 0x1
[    4.724034] pnp 00:08:   dependent set 1 (preferred) dma 1 3 (bitmask 0xa) flags 0x0
[    4.732034] pnp 00:08:   dependent set 2 (preferred) io  min 0x3bc max 0x3bc align 1 size 4 flags 0x1
[    4.740034] pnp 00:08:   dependent set 2 (preferred) io  min 0x7bc max 0x7bc align 1 size 4 flags 0x1
[    4.752035] pnp 00:08:   dependent set 2 (preferred) irq 5 7 flags 0x1
[    4.756034] pnp 00:08:   dependent set 2 (preferred) dma 1 3 (bitmask 0xa) flags 0x0
[    4.764036] device: '00:08': device_add
[    4.768067] bus: 'pnp': add device 00:08
[    4.772044] PM: Adding info for pnp:00:08
[    4.776089] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[    4.784127] pnp 00:09: parse allocated resources
[    4.788122] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[    4.796040] pnp 00:09:   add irq 12 flags 0x1
[    4.800037] device: '00:09': device_add
[    4.804067] bus: 'pnp': add device 00:09
[    4.808050] PM: Adding info for pnp:00:09
[    4.812088] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    4.824127] pnp 00:0a: parse allocated resources
[    4.828043] pnp 00:0a:   add io  0x60-0x60 flags 0x1
[    4.832034] pnp 00:0a:   add io  0x64-0x64 flags 0x1
[    4.836034] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[    4.844036] pnp 00:0a:   add irq 1 flags 0x1
[    4.848037] device: '00:0a': device_add
[    4.852067] bus: 'pnp': add device 00:0a
[    4.856044] PM: Adding info for pnp:00:0a
[    4.860088] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    4.868194] pnp 00:0b: parse allocated resources
[    4.872544] pnp 00:0b:   add io  0x3f8-0x3ff flags 0x1
[    4.880035] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[    4.884036] pnp 00:0b:   add irq 4 flags 0x1
[    4.892034] pnp 00:0b: parse resource options
[    4.896132] pnp 00:0b:   dependent set 0 (preferred) io  min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[    4.904036] pnp 00:0b:   dependent set 0 (preferred) irq 4 flags 0x1
[    4.912034] pnp 00:0b:   dependent set 1 (preferred) io  min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[    4.920035] pnp 00:0b:   dependent set 1 (preferred) irq 4 flags 0x1
[    4.924034] pnp 00:0b:   dependent set 2 (preferred) io  min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[    4.936035] pnp 00:0b:   dependent set 2 (preferred) irq 3 flags 0x1
[    4.940034] pnp 00:0b:   dependent set 3 (preferred) io  min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[    4.952035] pnp 00:0b:   dependent set 3 (preferred) irq 3 flags 0x1
[    4.956040] pnp 00:0b:   dependent set 4 (functional) io  min 0x100 max 0x3f8 align 8 size 8 flags 0x1
[    4.968036] pnp 00:0b:   dependent set 4 (functional) irq 1 3 4 5 6 7 8 10 11 12 13 14 15 flags 0x1
[    4.976036] device: '00:0b': device_add
[    4.979922] bus: 'pnp': add device 00:0b
[    4.984044] PM: Adding info for pnp:00:0b
[    4.988087] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.993899] pnp 00:0c: parse allocated resources
[    5.000042] pnp 00:0c:   add mem 0xfec00000-0xfec000ff flags 0x0
[    5.004036] device: '00:0c': device_add
[    5.008070] bus: 'pnp': add device 00:0c
[    5.012044] PM: Adding info for pnp:00:0c
[    5.016088] pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active)
[    5.024311] pnp: PnP ACPI: found 13 devices
[    5.028034] ACPI: ACPI bus type pnp unregistered
[    5.032034] initcall pnpacpi_init+0x0/0x8c returned 0 after 846 msecs
[    5.038583] calling  setup_shutdown_event+0x0/0x14
[    5.044034] initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 msecs
[    5.050409] calling  balloon_init+0x0/0x1c2
[    5.056037] initcall balloon_init+0x0/0x1c2 returned -19 after 0 msecs
[    5.060033] calling  misc_init+0x0/0xa0
[    5.064041] device class 'misc': registering
[    5.068093] initcall misc_init+0x0/0xa0 returned 0 after 3 msecs
[    5.078412] calling  cn_init+0x0/0xf3
[    5.080076] initcall cn_init+0x0/0xf3 returned 0 after 0 msecs
[    5.088033] calling  tifm_init+0x0/0x83
[    5.092098] bus: 'tifm': registered
[    5.095558] device class 'tifm_adapter': registering
[    5.100092] initcall tifm_init+0x0/0x83 returned 0 after 7 msecs
[    5.106415] calling  phy_init+0x0/0x31
[    5.112100] bus: 'mdio_bus': registered
[    5.116034] bus: 'mdio_bus': add driver Generic PHY
[    5.120097] initcall phy_init+0x0/0x31 returned 0 after 7 msecs
[    5.124033] calling  init_dvbdev+0x0/0xc3
[    5.128036] device class 'dvb': registering
[    5.132091] initcall init_dvbdev+0x0/0xc3 returned 0 after 3 msecs
[    5.140033] calling  init_scsi+0x0/0x8c
[    5.144300] device class 'scsi_host': registering
[    5.148101] bus: 'scsi': registered
[    5.152034] device class 'scsi_device': registering
[    5.156090] SCSI subsystem initialized
[    5.160034] initcall init_scsi+0x0/0x8c returned 0 after 15 msecs
[    5.166495] calling  ata_init+0x0/0x367
[    5.172075] libata version 3.00 loaded.
[    5.176034] initcall ata_init+0x0/0x367 returned 0 after 3 msecs
[    5.180033] calling  spi_init+0x0/0x83
[    5.184091] bus: 'spi': registered
[    5.188033] device class 'spi_master': registering
[    5.192090] initcall spi_init+0x0/0x83 returned 0 after 7 msecs
[    5.198411] calling  usb_init+0x0/0x113
[    5.204092] bus: 'usb': registered
[    5.208035] device class 'usb_host': registering
[    5.212090] bus: 'usb': add driver usbfs
[    5.216054] usbcore: registered new interface driver usbfs
[    5.220039] bus: 'usb': add driver hub
[    5.224095] usbcore: registered new interface driver hub
[    5.232068] bus: 'usb': add driver usb
[    5.232093] usbcore: registered new device driver usb
[    5.240034] initcall usb_init+0x0/0x113 returned 0 after 34 msecs
[    5.244033] calling  serio_init+0x0/0x98
[    5.248090] bus: 'serio': registered
[    5.252075] initcall serio_init+0x0/0x98 returned 0 after 3 msecs
[    5.258410] calling  gameport_init+0x0/0x99
[    5.264091] bus: 'gameport': registered
[    5.268068] initcall gameport_init+0x0/0x99 returned 0 after 3 msecs
[    5.272033] calling  input_init+0x0/0x108
[    5.276033] device class 'input': registering
[    5.284099] initcall input_init+0x0/0x108 returned 0 after 7 msecs
[    5.288033] calling  rtc_init+0x0/0x65
[    5.292034] device class 'rtc': registering
[    5.296090] initcall rtc_init+0x0/0x65 returned 0 after 3 msecs
[    5.302411] calling  i2c_init+0x0/0x67
[    5.308100] bus: 'i2c': registered
[    5.308100] device class 'i2c-adapter': registering
[    5.316092] bus: 'i2c': add driver dummy
[    5.320097] i2c-core: driver [dummy] registered
[    5.324038] initcall i2c_init+0x0/0x67 returned 0 after 15 msecs
[    5.328033] calling  hwmon_init+0x0/0x42
[    5.332034] device class 'hwmon': registering
[    5.336091] initcall hwmon_init+0x0/0x42 returned 0 after 3 msecs
[    5.344033] calling  thermal_init+0x0/0x58
[    5.348033] device class 'thermal': registering
[    5.352091] initcall thermal_init+0x0/0x58 returned 0 after 3 msecs
[    5.358412] calling  mmc_init+0x0/0x74
[    5.364091] bus: 'mmc': registered
[    5.368034] device class 'mmc_host': registering
[    5.372097] bus: 'sdio': registered
[    5.376034] initcall mmc_init+0x0/0x74 returned 0 after 11 msecs
[    5.380033] calling  leds_init+0x0/0x31
[    5.384034] device class 'leds': registering
[    5.388090] initcall leds_init+0x0/0x31 returned 0 after 3 msecs
[    5.394411] calling  dma_bus_init+0x0/0x33
[    5.400033] device class 'dma': registering
[    5.404090] initcall dma_bus_init+0x0/0x33 returned 0 after 3 msecs
[    5.408033] calling  ac97_bus_init+0x0/0x12
[    5.412091] bus: 'ac97': registered
[    5.416034] initcall ac97_bus_init+0x0/0x12 returned 0 after 3 msecs
[    5.424034] calling  pci_subsys_init+0x0/0x131
[    5.428033] PCI: Using ACPI for IRQ routing
[    5.432242] initcall pci_subsys_init+0x0/0x131 returned 0 after 3 msecs
[    5.440034] calling  proto_init+0x0/0x2e
[    5.444039] initcall proto_init+0x0/0x2e returned 0 after 0 msecs
[    5.448034] calling  net_dev_init+0x0/0x1f1
[    5.452051] device class 'net': registering
[    5.460074] initcall net_dev_init+0x0/0x1f1 returned 0 after 7 msecs
[    5.464033] calling  neigh_init+0x0/0x71
[    5.468034] initcall neigh_init+0x0/0x71 returned 0 after 0 msecs
[    5.474410] calling  fib_rules_init+0x0/0xa6
[    5.480035] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 msecs
[    5.484033] calling  pktsched_init+0x0/0xc4
[    5.488042] initcall pktsched_init+0x0/0xc4 returned 0 after 0 msecs
[    5.496033] calling  tc_filter_init+0x0/0x4c
[    5.500035] initcall tc_filter_init+0x0/0x4c returned 0 after 0 msecs
[    5.506410] calling  genl_init+0x0/0xd8
[    5.524074] initcall genl_init+0x0/0xd8 returned 0 after 11 msecs
[    5.528034] calling  cipso_v4_init+0x0/0x88
[    5.532042] initcall cipso_v4_init+0x0/0x88 returned 0 after 0 msecs
[    5.540033] calling  wanrouter_init+0x0/0x55
[    5.544033] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[    5.552046] initcall wanrouter_init+0x0/0x55 returned 0 after 7 msecs
[    5.558410] calling  irda_init+0x0/0x92
[    5.564073] NET: Registered protocol family 23
[    5.568087] initcall irda_init+0x0/0x92 returned 0 after 3 msecs
[    5.572033] calling  bt_init+0x0/0x5d
[    5.576033] Bluetooth: Core ver 2.13
[    5.580082] device class 'bluetooth': registering
[    5.588092] NET: Registered protocol family 31
[    5.592033] Bluetooth: HCI device and connection manager initialized
[    5.596040] Bluetooth: HCI socket layer initialized
[    5.604033] initcall bt_init+0x0/0x5d returned 0 after 26 msecs
[    5.608033] calling  wireless_nlevent_init+0x0/0x41
[    5.612033] initcall wireless_nlevent_init+0x0/0x41 returned 0 after 0 msecs
[    5.620034] calling  cfg80211_init+0x0/0x4d
[    5.624033] device class 'ieee80211': registering
[    5.628091] initcall cfg80211_init+0x0/0x4d returned 0 after 3 msecs
[    5.636033] calling  ieee80211_init+0x0/0x1f
[    5.640040] initcall ieee80211_init+0x0/0x1f returned 0 after 0 msecs
[    5.646410] calling  netlbl_init+0x0/0x83
[    5.652033] NetLabel: Initializing
[    5.656032] NetLabel:  domain hash size = 128
[    5.660032] NetLabel:  protocols = UNLABELED CIPSOv4
[    5.664101] NetLabel:  unlabeled traffic allowed by default
[    5.668034] initcall netlbl_init+0x0/0x83 returned 0 after 15 msecs
[    5.676033] calling  rfkill_init+0x0/0x72
[    5.680033] device class 'rfkill': registering
[    5.684090] initcall rfkill_init+0x0/0x72 returned 0 after 3 msecs
[    5.690410] calling  sysctl_init+0x0/0x49
[    5.696034] initcall sysctl_init+0x0/0x49 returned 0 after 0 msecs
[    5.704035] calling  pci_iommu_init+0x0/0x1c
[    5.708102] PCI-GART: No AMD northbridge found.
[    5.712034] initcall pci_iommu_init+0x0/0x1c returned 0 after 3 msecs
[    5.718410] calling  print_all_ICs+0x0/0x4b9
[    5.724033] 
[    5.724033] printing PIC contents
[    5.728035] ... PIC  IMR: ffff
[    5.731105] ... PIC  IRR: 0c00
[    5.736033] ... PIC  ISR: 0000
[    5.736034] ... PIC ELCR: 0e00
[    5.740034] 
[    5.740034] printing local APIC contents on CPU#0/0:
[    5.744031] ... APIC ID:      00000000 (0)
[    5.744031] ... APIC VERSION: 00050014
[    5.744031] ... APIC TASKPRI: 00000000 (00)
[    5.744031] ... APIC PROCPRI: 00000000
[    5.744031] ... APIC LDR: 01000000
[    5.744031] ... APIC DFR: ffffffff
[    5.744031] ... APIC SPIV: 000001ff
[    5.744031] ... APIC ISR field:
[    5.744031] 0123456789abcdef0123456789abcdef
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] ... APIC TMR field:
[    5.744031] 0123456789abcdef0123456789abcdef
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] ... APIC IRR field:
[    5.744031] 0123456789abcdef0123456789abcdef
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000010000000000000000
[    5.744031] ... APIC ESR: 00000000
[    5.744031] ... APIC ICR: 00000606
[    5.744031] ... APIC ICR2: 01000000
[    5.744031] ... APIC LVTT: 000200ef
[    5.744031] ... APIC LVTPC: 00010000
[    5.744031] ... APIC LVT0: 00010700
[    5.744031] ... APIC LVT1: 00000400
[    5.744031] ... APIC LVTERR: 000000fe
[    5.744031] ... APIC TMICT: 0001046a
[    5.744031] ... APIC TMCCT: 000072ff
[    5.744031] ... APIC TDCR: 00000003
[    5.744031] 
[    5.741516] 
[    5.741516] printing local APIC contents on CPU#1/1:
[    5.744031] ... APIC ID:      01000000 (1)
[    5.744031] ... APIC VERSION: 00050014
[    5.744031] ... APIC TASKPRI: 00000000 (00)
[    5.744031] ... APIC PROCPRI: 00000000
[    5.744031] ... APIC LDR: 02000000
[    5.744031] ... APIC DFR: ffffffff
[    5.744031] ... APIC SPIV: 000001ff
[    5.744031] ... APIC ISR field:
[    5.744031] 0123456789abcdef0123456789abcdef
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] ... APIC TMR field:
[    5.744031] 0123456789abcdef0123456789abcdef
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] ... APIC IRR field:
[    5.744031] 0123456789abcdef0123456789abcdef
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000000000000000000000
[    5.744031] 00000000000000010000000000000000
[    5.744031] ... APIC ESR: 00000000
[    5.744031] ... APIC ICR: 000008fb
[    5.744031] ... APIC ICR2: 01000000
[    5.744031] ... APIC LVTT: 000200ef
[    5.744031] ... APIC LVTPC: 00010000
[    5.744031] ... APIC LVT0: 00010700
[    5.744031] ... APIC LVT1: 00010400
[    5.744031] ... APIC LVTERR: 000000fe
[    5.744031] ... APIC TMICT: 0001046a
[    5.744031] ... APIC TMCCT: 00000de8
[    5.744031] ... APIC TDCR: 00000003
[    5.744031] 
[    5.972037] number of MP IRQ sources: 15.
[    5.976033] number of IO-APIC #2 registers: 24.
[    5.980033] testing the IO APIC.......................
[    5.984037] 
[    5.985548] IO APIC #2......
[    5.988033] .... register #00: 00000000
[    5.992033] .......    : physical APIC id: 00
[    6.000033] .......    : Delivery Type: 0
[    6.004033] .......    : LTS          : 0
[    6.008033] .... register #01: 00170020
[    6.012033] .......     : max redirection entries: 0017
[    6.016033] .......     : PRQ implemented: 0
[    6.020033] .......     : IO APIC version: 0020
[    6.024033] .... IRQ redirection table:
[    6.028033]  NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:   
[    6.032035]  00 000 1    0    0   0   0    0    0    00
[    6.039278]  01 003 0    0    0   0   0    1    1    31
[    6.044035]  02 003 0    0    0   0   0    1    1    30
[    6.048035]  03 003 0    0    0   0   0    1    1    33
[    6.055278]  04 003 0    0    0   0   0    1    1    34
[    6.060035]  05 003 0    0    0   0   0    1    1    35
[    6.064035]  06 003 0    0    0   0   0    1    1    36
[    6.071278]  07 003 0    0    0   0   0    1    1    37
[    6.076035]  08 003 0    0    0   0   0    1    1    38
[    6.080035]  09 003 0    1    0   0   0    1    1    39
[    6.088035]  0a 003 0    0    0   0   0    1    1    3A
[    6.092035]  0b 003 0    0    0   0   0    1    1    3B
[    6.096035]  0c 003 0    0    0   0   0    1    1    3C
[    6.104035]  0d 003 0    0    0   0   0    1    1    3D
[    6.108035]  0e 003 0    0    0   0   0    1    1    3E
[    6.112035]  0f 003 0    0    0   0   0    1    1    3F
[    6.120035]  10 000 1    0    0   0   0    0    0    00
[    6.124033]  11 000 1    0    0   0   0    0    0    00
[    6.128038]  12 000 1    0    0   0   0    0    0    00
[    6.132035]  13 000 1    0    0   0   0    0    0    00
[    6.139277]  14 000 1    0    0   0   0    0    0    00
[    6.144035]  15 000 1    0    0   0   0    0    0    00
[    6.148035]  16 000 1    0    0   0   0    0    0    00
[    6.155277]  17 000 1    0    0   0   0    0    0    00
[    6.160033] IRQ to pin mappings:
[    6.164033] IRQ0 -> 0:2
[    6.166563] IRQ1 -> 0:1
[    6.168797] IRQ3 -> 0:3
[    6.171328] IRQ4 -> 0:4
[    6.172797] IRQ5 -> 0:5
[    6.176797] IRQ6 -> 0:6
[    6.179328] IRQ7 -> 0:7
[    6.180797] IRQ8 -> 0:8
[    6.184243] IRQ9 -> 0:9
[    6.186774] IRQ10 -> 0:10
[    6.188883] IRQ11 -> 0:11
[    6.192243] IRQ12 -> 0:12
[    6.194947] IRQ13 -> 0:13
[    6.196883] IRQ14 -> 0:14
[    6.200243] IRQ15 -> 0:15
[    6.202948] .................................... done.
[    6.208033] initcall print_all_ICs+0x0/0x4b9 returned 0 after 461 msecs
[    6.214583] calling  hpet_late_init+0x0/0x192
[    6.220036] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    6.224243] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    6.229039] initcall hpet_late_init+0x0/0x192 returned 0 after 11 msecs
[    6.236033] calling  init_kmmio+0x0/0x2c
[    6.240039] initcall init_kmmio+0x0/0x2c returned 0 after 0 msecs
[    6.248034] calling  clocksource_done_booting+0x0/0x12
[    6.252033] initcall clocksource_done_booting+0x0/0x12<6>Switched to NOHz mode on CPU #0
[    6.262678] Switched to NOHz mode on CPU #1
[    6.266876]  returned 0 after 0 msecs
[    6.273112] calling  tracer_alloc_buffers+0x0/0x4e4
[    6.279818] tracer: 357 pages allocated for 16384 entries of 88 bytes
[    6.286269]    actual entries 16422
[    6.289878] initcall tracer_alloc_buffers+0x0/0x4e4 returned 0 after 11 msecs
[    6.297058] calling  init_pipe_fs+0x0/0x4c
[    6.301211] initcall init_pipe_fs+0x0/0x4c returned 0 after 0 msecs
[    6.307523] calling  init_mnt_writers+0x0/0x87
[    6.311983] initcall init_mnt_writers+0x0/0x87 returned 0 after 0 msecs
[    6.318642] calling  eventpoll_init+0x0/0x95
[    6.322942] initcall eventpoll_init+0x0/0x95 returned 0 after 0 msecs
[    6.329431] calling  anon_inode_init+0x0/0x115
[    6.333909] initcall anon_inode_init+0x0/0x115 returned 0 after 0 msecs
[    6.340572] calling  pcie_aspm_init+0x0/0x22
[    6.347314] initcall pcie_aspm_init+0x0/0x22 returned 0 after 2 msecs
[    6.353806] calling  acpi_event_init+0x0/0x80
[    6.372081] initcall acpi_event_init+0x0/0x80 returned 0 after 13 msecs
[    6.378744] calling  pnp_system_init+0x0/0x12
[    6.383117] pnp: the driver 'system' has been registered
[    6.388441] bus: 'pnp': add driver system
[    6.394762] bus: 'pnp': driver_probe_device: matched device 00:01 with driver system
[    6.402517] bus: 'pnp': really_probe: probing driver system with device 00:01
[    6.409680] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[    6.416826] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[    6.423972] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    6.431118] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    6.438263] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    6.445407] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    6.452551] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[    6.459704] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[    6.466849] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[    6.473476] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[    6.480447] system 00:01: driver attached
[    6.484475] driver: '00:01': driver_bound: bound to device 'system'
[    6.490754] bus: 'pnp': really_probe: bound device 00:01 to driver system
[    6.497558] bus: 'pnp': driver_probe_device: matched device 00:06 with driver system
[    6.505314] bus: 'pnp': really_probe: probing driver system with device 00:06
[    6.512464] system 00:06: ioport range 0x500-0x53f has been reserved
[    6.518830] system 00:06: ioport range 0x400-0x47f has been reserved
[    6.525196] system 00:06: ioport range 0x680-0x6ff has been reserved
[    6.531561] system 00:06: driver attached
[    6.535585] driver: '00:06': driver_bound: bound to device 'system'
[    6.541864] bus: 'pnp': really_probe: bound device 00:06 to driver system
[    6.548771] initcall pnp_system_init+0x0/0x12 returned 0 after 157 msecs
[    6.555517] calling  chr_dev_init+0x0/0xb4
[    6.559650] device class 'mem': registering
[    6.563946] device: 'mem': device_add
[    6.567651] PM: Adding info for No Bus:mem
[    6.571872] device: 'null': device_add
[    6.575656] PM: Adding info for No Bus:null
[    6.579948] device: 'port': device_add
[    6.583731] PM: Adding info for No Bus:port
[    6.588025] device: 'zero': device_add
[    6.591812] PM: Adding info for No Bus:zero
[    6.596105] device: 'full': device_add
[    6.599885] PM: Adding info for No Bus:full
[    6.604177] device: 'random': device_add
[    6.608134] PM: Adding info for No Bus:random
[    6.612599] device: 'urandom': device_add
[    6.616643] PM: Adding info for No Bus:urandom
[    6.621195] device: 'kmsg': device_add
[    6.624986] PM: Adding info for No Bus:kmsg
[    6.629278] device: 'oldmem': device_add
[    6.633236] PM: Adding info for No Bus:oldmem
[    6.637699] initcall chr_dev_init+0x0/0xb4 returned 0 after 74 msecs
[    6.644102] calling  firmware_class_init+0x0/0x79
[    6.648819] device class 'firmware': registering
[    6.653547] initcall firmware_class_init+0x0/0x79 returned 0 after 4 msecs
[    6.660471] calling  loopback_init+0x0/0x12
[    6.664685] device: 'lo': device_add
[    6.668366] PM: Adding info for No Bus:lo
[    6.672505] initcall loopback_init+0x0/0x12 returned 0 after 7 msecs
[    6.678905] calling  init_acpi_pm_clocksource+0x0/0xba
[    6.684080] initcall init_acpi_pm_clocksource+0x0/0xba returned 0 after 0 msecs
[    6.691437] calling  ssb_modinit+0x0/0x4a
[    6.695580] bus: 'ssb': registered
[    6.699007] initcall ssb_modinit+0x0/0x4a returned 0 after 3 msecs
[    6.705235] calling  pcibios_assign_resources+0x0/0x88
[    6.710475] pci 0000:01:00.0: BAR 6: got res [0x50320000-0x5033ffff] bus [0x50320000-0x5033ffff] flags 0x27200
[    6.720485] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    6.726417] pci 0000:00:01.0:   IO window: 0x3000-0x3fff
[    6.731743] pci 0000:00:01.0:   MEM window: 0x50300000-0x503fffff
[    6.737850] pci 0000:00:01.0:   PREFETCH window: 0x00000040000000-0x0000004fffffff
[    6.745436] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    6.751367] pci 0000:00:1c.0:   IO window: disabled
[    6.756262] pci 0000:00:1c.0:   MEM window: 0x50200000-0x502fffff
[    6.762368] pci 0000:00:1c.0:   PREFETCH window: disabled
[    6.767785] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[    6.773715] pci 0000:00:1c.4:   IO window: disabled
[    6.778609] pci 0000:00:1c.4:   MEM window: disabled
[    6.783590] pci 0000:00:1c.4:   PREFETCH window: disabled
[    6.789007] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[    6.794939] pci 0000:00:1c.5:   IO window: 0x2000-0x2fff
[    6.800266] pci 0000:00:1c.5:   MEM window: 0x50100000-0x501fffff
[    6.806373] pci 0000:00:1c.5:   PREFETCH window: disabled
[    6.811789] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[    6.817722] pci 0000:00:1e.0:   IO window: 0x1000-0x1fff
[    6.823051] pci 0000:00:1e.0:   MEM window: 0x50000000-0x500fffff
[    6.829158] pci 0000:00:1e.0:   PREFETCH window: disabled
[    6.834585] found new irq_cfg for irq 16
[    6.838524]  0 add_pin_to_irq: irq 16 --> apic 0 pin 16
[    6.843764] IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1)
[    6.851260] found new irq_desc for irq 16
[    6.855286] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.861999] pci 0000:00:01.0: setting latency timer to 64
[    6.867418] found new irq_cfg for irq 17
[    6.871357]  0 add_pin_to_irq: irq 17 --> apic 0 pin 17
[    6.876597] IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1)
[    6.884092] found new irq_desc for irq 17
[    6.888117] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    6.894831] pci 0000:00:1c.0: setting latency timer to 64
[    6.900249] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    6.909262] pci 0000:00:1c.4: setting latency timer to 64
[    6.914679] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    6.921393] pci 0000:00:1c.5: setting latency timer to 64
[    6.926810] pci 0000:00:1e.0: setting latency timer to 64
[    6.932224] bus: 00 index 0 io port: [0, ffff]
[    6.936682] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[    6.941920] bus: 01 index 0 io port: [3000, 3fff]
[    6.946637] bus: 01 index 1 mmio: [50300000, 503fffff]
[    6.951789] bus: 01 index 2 mmio: [40000000, 4fffffff]
[    6.956941] bus: 01 index 3 mmio: [0, 0]
[    6.960880] bus: 02 index 0 mmio: [0, 0]
[    6.964818] bus: 02 index 1 mmio: [50200000, 502fffff]
[    6.969970] bus: 02 index 2 mmio: [0, 0]
[    6.973909] bus: 02 index 3 mmio: [0, 0]
[    6.977848] bus: 03 index 0 mmio: [0, 0]
[    6.981786] bus: 03 index 1 mmio: [0, 0]
[    6.985725] bus: 03 index 2 mmio: [0, 0]
[    6.989663] bus: 03 index 3 mmio: [0, 0]
[    6.993602] bus: 04 index 0 io port: [2000, 2fff]
[    6.998321] bus: 04 index 1 mmio: [50100000, 501fffff]
[    7.003477] bus: 04 index 2 mmio: [0, 0]
[    7.007416] bus: 04 index 3 mmio: [0, 0]
[    7.011355] bus: 05 index 0 io port: [1000, 1fff]
[    7.016074] bus: 05 index 1 mmio: [50000000, 500fffff]
[    7.021227] bus: 05 index 2 mmio: [0, 0]
[    7.025166] bus: 05 index 3 io port: [0, ffff]
[    7.029623] bus: 05 index 4 mmio: [0, ffffffffffffffff]
[    7.034863] initcall pcibios_assign_resources+0x0/0x88 returned 0 after 309 msecs
[    7.042395] calling  inet_init+0x0/0x1e9
[    7.046360] NET: Registered protocol family 2
[    7.096341] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    7.104415] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    7.113943] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[    7.123184] TCP: Hash tables configured (established 131072 bind 65536)
[    7.129856] TCP reno registered
[    7.148494] initcall inet_init+0x0/0x1e9 returned 0 after 97 msecs
[    7.154727] calling  af_unix_init+0x0/0x55
[    7.158849] NET: Registered protocol family 1
[    7.163233] initcall af_unix_init+0x0/0x55 returned 0 after 4 msecs
[    7.169549] calling  populate_rootfs+0x0/0x233
[    7.174469] initcall populate_rootfs+0x0/0x233 returned 0 after 0 msecs
[    7.181135] calling  calgary_fixup_tce_spaces+0x0/0xf0
[    7.186287] initcall calgary_fixup_tce_spaces+0x0/0xf0 returned -19 after 0 msecs
[    7.193821] calling  pci_init+0x0/0x3a
[    7.197595] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x17f
[    7.203994] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.210310] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.216971] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xaa
[    7.222854] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x17f
[    7.229258] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.235568] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.242229] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xaa
[    7.248114] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x17f
[    7.254513] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.260830] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.267487] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xaa
[    7.273371] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x17f
[    7.279768] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.286083] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.295298] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xaa
[    7.301181] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x17f
[    7.307579] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x20
[    7.313894] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.320554] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xaa
[    7.326434] pci 0000:00:1c.5: calling quirk_e100_interrupt+0x0/0x17f
[    7.332838] pci 0000:00:1c.5: calling quirk_cardbus_legacy+0x0/0x20
[    7.339148] pci 0000:00:1c.5: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.345809] pci 0000:00:1c.5: calling pci_fixup_video+0x0/0xaa
[    7.351690] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x17f
[    7.358092] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.364405] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.371067] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
[    7.377605] pci 0000:00:1d.0: Performing full reset
[    7.382507] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xaa
[    7.388391] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x17f
[    7.394790] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x20
[    7.401105] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.407765] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[    7.414303] pci 0000:00:1d.1: Performing full reset
[    7.419202] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xaa
[    7.425085] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x17f
[    7.431485] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x20
[    7.437800] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.444465] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[    7.451003] pci 0000:00:1d.2: Performing full reset
[    7.455902] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xaa
[    7.461789] pci 0000:00:1d.3: calling quirk_e100_interrupt+0x0/0x17f
[    7.468192] pci 0000:00:1d.3: calling quirk_cardbus_legacy+0x0/0x20
[    7.474504] pci 0000:00:1d.3: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.481169] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
[    7.487706] pci 0000:00:1d.3: Performing full reset
[    7.492605] pci 0000:00:1d.3: calling pci_fixup_video+0x0/0xaa
[    7.498489] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x17f
[    7.504896] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x20
[    7.511207] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.517999] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xaa
[    7.523882] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x17f
[    7.530285] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.536600] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.543258] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xaa
[    7.549145] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x17f
[    7.555545] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.561860] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.568522] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xaa
[    7.574406] pci 0000:00:1f.1: calling quirk_e100_interrupt+0x0/0x17f
[    7.580809] pci 0000:00:1f.1: calling quirk_cardbus_legacy+0x0/0x20
[    7.587120] pci 0000:00:1f.1: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.593782] pci 0000:00:1f.1: calling pci_fixup_video+0x0/0xaa
[    7.599664] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x17f
[    7.606067] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x20
[    7.612381] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.619040] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xaa
[    7.624926] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x17f
[    7.631324] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x20
[    7.637639] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.644301] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xaa
[    7.650183] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.656498] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.663157] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xaa
[    7.669040] pci 0000:01:00.0: Boot video device
[    7.673588] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x20
[    7.679899] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.686562] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xaa
[    7.692446] pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.698759] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.705421] pci 0000:02:00.0: calling pci_fixup_video+0x0/0xaa
[    7.711304] pci 0000:04:00.0: calling quirk_e100_interrupt+0x0/0x17f
[    7.717707] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.724018] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.730680] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xaa
[    7.736564] pci 0000:05:02.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.742878] pci 0000:05:02.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.749541] pci 0000:05:02.0: calling pci_fixup_video+0x0/0xaa
[    7.755422] pci 0000:05:04.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.761737] pci 0000:05:04.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.768402] pci 0000:05:04.0: calling pci_fixup_video+0x0/0xaa
[    7.774287] pci 0000:05:05.0: calling quirk_cardbus_legacy+0x0/0x20
[    7.780601] pci 0000:05:05.0: calling quirk_usb_early_handoff+0x0/0x3d7
[    7.787260] pci 0000:05:05.0: calling pci_fixup_video+0x0/0xaa
[    7.793145] initcall pci_init+0x0/0x3a returned 0 after 567 msecs
[    7.799286] calling  ehci_hcd_init+0x0/0x8b
[    7.803486] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[    7.809515] bus: 'pci': add driver ehci_hcd
[    7.813746] bus: 'pci': driver_probe_device: matched device 0000:00:1d.7 with driver ehci_hcd
[    7.822281] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:1d.7
[    7.830243] found new irq_cfg for irq 23
[    7.834183]  0 add_pin_to_irq: irq 23 --> apic 0 pin 23
[    7.839425] IOAPIC[0]: Set routing entry (2-23 -> 0x59 -> IRQ 23 Mode:1 Active:1)
[    7.846920] found new irq_desc for irq 23
[    7.850950] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    7.858105] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    7.863951] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    7.869216] device: 'usb_host1': device_add
[    7.873437] PM: Adding info for No Bus:usb_host1
[    7.878230] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    7.885647] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[    7.894619] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[    7.902928] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    7.915703] ehci_hcd 0000:00:1d.7: debug port 1
[    7.920253] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    7.927052] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[    7.932844] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50404400
[    7.938517] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    7.951278] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[    7.968060] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    7.975646] usb usb1: default language 0x0409
[    7.980047] device: 'usb1': device_add
[    7.983873] bus: 'usb': add device usb1
[    7.987745] PM: Adding info for usb:usb1
[    7.991694] usb usb1: uevent
[    7.994686] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[    8.002095] bus: 'usb': really_probe: probing driver usb with device usb1
[    8.008898] usb usb1: usb_probe_device
[    8.012664] usb usb1: configuration #1 chosen from 1 choice
[    8.018269] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    8.024028] device: '1-0:1.0': device_add
[    8.028072] bus: 'usb': add device 1-0:1.0
[    8.032195] PM: Adding info for usb:1-0:1.0
[    8.036402] usb 1-0:1.0: uevent
[    8.039656] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[    8.047325] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[    8.054389] hub 1-0:1.0: usb_probe_interface
[    8.058675] hub 1-0:1.0: usb_probe_interface - got id
[    8.063740] hub 1-0:1.0: USB hub found
[    8.067530] hub 1-0:1.0: 8 ports detected
[    8.071557] hub 1-0:1.0: standalone hub
[    8.075410] hub 1-0:1.0: no power switching (usb 1.0)
[    8.080473] hub 1-0:1.0: individual port over-current protection
[    8.086491] hub 1-0:1.0: power on to power good time: 20ms
[    8.092009] hub 1-0:1.0: local power source is good
[    8.096902] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    8.204151] driver: '1-0:1.0': driver_bound: bound to device 'hub'
[    8.204157] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
[    8.215848] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[    8.222564] device class 'usb_endpoint': registering
[    8.227674] device: 'usbdev1.1_ep81': device_add
[    8.232352] PM: Adding info for No Bus:usbdev1.1_ep81
[    8.237527] driver: 'usb1': driver_bound: bound to device 'usb'
[    8.243460] bus: 'usb': really_probe: bound device usb1 to driver usb
[    8.249932] device: 'usbdev1.1_ep00': device_add
[    8.254612] PM: Adding info for No Bus:usbdev1.1_ep00
[    8.259778] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    8.266578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.273813] usb usb1: Product: EHCI Host Controller
[    8.278706] usb usb1: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty ehci_hcd
[    8.286634] usb usb1: SerialNumber: 0000:00:1d.7
[    8.291268] driver: '0000:00:1d.7': driver_bound: bound to device 'ehci_hcd'
[    8.298327] bus: 'pci': really_probe: bound device 0000:00:1d.7 to driver ehci_hcd
[    8.306024] initcall ehci_hcd_init+0x0/0x8b returned 0 after 479 msecs
[    8.312601] calling  ohci_hcd_mod_init+0x0/0xa4
[    8.317147] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.324642] ohci_hcd: block sizes: ed 80 td 96
[    8.329107] bus: 'pci': add driver ohci_hcd
[    8.333438] initcall ohci_hcd_mod_init+0x0/0xa4 returned 0 after 15 msecs
[    8.340274] calling  uhci_hcd_init+0x0/0xec
[    8.344472] USB Universal Host Controller Interface driver v3.0
[    8.350421] bus: 'pci': add driver uhci_hcd
[    8.354633] bus: 'pci': driver_probe_device: matched device 0000:00:1d.0 with driver uhci_hcd
[    8.363172] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.0
[    8.371114] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    8.378265] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    8.386667] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    8.391917] device: 'usb_host2': device_add
[    8.396146] PM: Adding info for No Bus:usb_host2
[    8.400874] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    8.408290] uhci_hcd 0000:00:1d.0: detected 2 ports
[    8.413184] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[    8.419894] uhci_hcd 0000:00:1d.0: Performing full reset
[    8.425231] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[    8.431000] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[    8.436832] usb usb2: default language 0x0409
[    8.441233] device: 'usb2': device_add
[    8.445055] bus: 'usb': add device usb2
[    8.448920] PM: Adding info for usb:usb2
[    8.452867] usb usb2: uevent
[    8.455853] bus: 'usb': driver_probe_device: matched device usb2 with driver usb
[    8.463262] bus: 'usb': really_probe: probing driver usb with device usb2
[    8.470064] usb usb2: usb_probe_device
[    8.473832] usb usb2: configuration #1 chosen from 1 choice
[    8.479426] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    8.485185] device: '2-0:1.0': device_add
[    8.489228] bus: 'usb': add device 2-0:1.0
[    8.493367] PM: Adding info for usb:2-0:1.0
[    8.497574] usb 2-0:1.0: uevent
[    8.500821] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub
[    8.508490] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
[    8.515552] hub 2-0:1.0: usb_probe_interface
[    8.519838] hub 2-0:1.0: usb_probe_interface - got id
[    8.524902] hub 2-0:1.0: USB hub found
[    8.528693] hub 2-0:1.0: 2 ports detected
[    8.532721] hub 2-0:1.0: standalone hub
[    8.536573] hub 2-0:1.0: no power switching (usb 1.0)
[    8.541637] hub 2-0:1.0: individual port over-current protection
[    8.547655] hub 2-0:1.0: power on to power good time: 2ms
[    8.553081] hub 2-0:1.0: local power source is good
[    8.557974] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    8.668086] driver: '2-0:1.0': driver_bound: bound to device 'hub'
[    8.668093] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    8.679783] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
[    8.686500] device: 'usbdev2.1_ep81': device_add
[    8.691176] PM: Adding info for No Bus:usbdev2.1_ep81
[    8.696342] driver: 'usb2': driver_bound: bound to device 'usb'
[    8.702274] bus: 'usb': really_probe: bound device usb2 to driver usb
[    8.708752] device: 'usbdev2.1_ep00': device_add
[    8.713420] PM: Adding info for No Bus:usbdev2.1_ep00
[    8.718582] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    8.725381] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.732615] usb usb2: Product: UHCI Host Controller
[    8.737507] usb usb2: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty uhci_hcd
[    8.745436] usb usb2: SerialNumber: 0000:00:1d.0
[    8.750078] driver: '0000:00:1d.0': driver_bound: bound to device 'uhci_hcd'
[    8.757135] bus: 'pci': really_probe: bound device 0000:00:1d.0 to driver uhci_hcd
[    8.764718] bus: 'pci': driver_probe_device: matched device 0000:00:1d.1 with driver uhci_hcd
[    8.773251] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.1
[    8.781189] found new irq_cfg for irq 19
[    8.785128]  0 add_pin_to_irq: irq 19 --> apic 0 pin 19
[    8.790368] IOAPIC[0]: Set routing entry (2-19 -> 0x61 -> IRQ 19 Mode:1 Active:1)
[    8.797862] found new irq_desc for irq 19
[    8.801890] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    8.809040] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    8.814886] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    8.820136] device: 'usb_host3': device_add
[    8.824363] PM: Adding info for No Bus:usb_host3
[    8.829090] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    8.836513] uhci_hcd 0000:00:1d.1: detected 2 ports
[    8.841408] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[    8.848118] uhci_hcd 0000:00:1d.1: Performing full reset
[    8.853455] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[    8.859238] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[    8.865065] usb usb3: default language 0x0409
[    8.869466] device: 'usb3': device_add
[    8.873289] bus: 'usb': add device usb3
[    8.877154] PM: Adding info for usb:usb3
[    8.881101] usb usb3: uevent
[    8.884084] bus: 'usb': driver_probe_device: matched device usb3 with driver usb
[    8.891493] bus: 'usb': really_probe: probing driver usb with device usb3
[    8.898296] usb usb3: usb_probe_device
[    8.902061] usb usb3: configuration #1 chosen from 1 choice
[    8.907657] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    8.913416] device: '3-0:1.0': device_add
[    8.917460] bus: 'usb': add device 3-0:1.0
[    8.921590] PM: Adding info for usb:3-0:1.0
[    8.925797] usb 3-0:1.0: uevent
[    8.929044] bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub
[    8.936714] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
[    8.943775] hub 3-0:1.0: usb_probe_interface
[    8.948061] hub 3-0:1.0: usb_probe_interface - got id
[    8.953126] hub 3-0:1.0: USB hub found
[    8.956904] hub 3-0:1.0: 2 ports detected
[    8.960929] hub 3-0:1.0: standalone hub
[    8.964781] hub 3-0:1.0: no power switching (usb 1.0)
[    8.969845] hub 3-0:1.0: individual port over-current protection
[    8.975864] hub 3-0:1.0: power on to power good time: 2ms
[    8.981288] hub 3-0:1.0: local power source is good
[    8.986182] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    9.096068] driver: '3-0:1.0': driver_bound: bound to device 'hub'
[    9.096074] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    9.107763] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
[    9.114481] device: 'usbdev3.1_ep81': device_add
[    9.119165] PM: Adding info for No Bus:usbdev3.1_ep81
[    9.124331] driver: 'usb3': driver_bound: bound to device 'usb'
[    9.130264] bus: 'usb': really_probe: bound device usb3 to driver usb
[    9.136747] device: 'usbdev3.1_ep00': device_add
[    9.141416] PM: Adding info for No Bus:usbdev3.1_ep00
[    9.146579] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    9.153379] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.160613] usb usb3: Product: UHCI Host Controller
[    9.165504] usb usb3: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty uhci_hcd
[    9.173430] usb usb3: SerialNumber: 0000:00:1d.1
[    9.178071] driver: '0000:00:1d.1': driver_bound: bound to device 'uhci_hcd'
[    9.185128] bus: 'pci': really_probe: bound device 0000:00:1d.1 to driver uhci_hcd
[    9.192712] bus: 'pci': driver_probe_device: matched device 0000:00:1d.2 with driver uhci_hcd
[    9.201246] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.2
[    9.209184] found new irq_cfg for irq 18
[    9.213123]  0 add_pin_to_irq: irq 18 --> apic 0 pin 18
[    9.218363] IOAPIC[0]: Set routing entry (2-18 -> 0x69 -> IRQ 18 Mode:1 Active:1)
[    9.225859] found new irq_desc for irq 18
[    9.229887] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    9.237037] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    9.242884] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    9.248152] device: 'usb_host4': device_add
[    9.252381] PM: Adding info for No Bus:usb_host4
[    9.257109] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    9.264541] uhci_hcd 0000:00:1d.2: detected 2 ports
[    9.269436] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[    9.276147] uhci_hcd 0000:00:1d.2: Performing full reset
[    9.281481] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[    9.287264] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[    9.293088] usb usb4: default language 0x0409
[    9.297486] device: 'usb4': device_add
[    9.301307] bus: 'usb': add device usb4
[    9.305173] PM: Adding info for usb:usb4
[    9.309120] usb usb4: uevent
[    9.312106] bus: 'usb': driver_probe_device: matched device usb4 with driver usb
[    9.319516] bus: 'usb': really_probe: probing driver usb with device usb4
[    9.326328] usb usb4: usb_probe_device
[    9.330107] usb usb4: configuration #1 chosen from 1 choice
[    9.335705] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    9.341465] device: '4-0:1.0': device_add
[    9.345509] bus: 'usb': add device 4-0:1.0
[    9.349639] PM: Adding info for usb:4-0:1.0
[    9.353846] usb 4-0:1.0: uevent
[    9.357091] bus: 'usb': driver_probe_device: matched device 4-0:1.0 with driver hub
[    9.364761] bus: 'usb': really_probe: probing driver hub with device 4-0:1.0
[    9.371822] hub 4-0:1.0: usb_probe_interface
[    9.376109] hub 4-0:1.0: usb_probe_interface - got id
[    9.381174] hub 4-0:1.0: USB hub found
[    9.384953] hub 4-0:1.0: 2 ports detected
[    9.388979] hub 4-0:1.0: standalone hub
[    9.392832] hub 4-0:1.0: no power switching (usb 1.0)
[    9.397897] hub 4-0:1.0: individual port over-current protection
[    9.403915] hub 4-0:1.0: power on to power good time: 2ms
[    9.409341] hub 4-0:1.0: local power source is good
[    9.414233] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    9.524070] driver: '4-0:1.0': driver_bound: bound to device 'hub'
[    9.524076] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    9.535765] bus: 'usb': really_probe: bound device 4-0:1.0 to driver hub
[    9.542483] device: 'usbdev4.1_ep81': device_add
[    9.547150] PM: Adding info for No Bus:usbdev4.1_ep81
[    9.552323] driver: 'usb4': driver_bound: bound to device 'usb'
[    9.560810] bus: 'usb': really_probe: bound device usb4 to driver usb
[    9.567287] device: 'usbdev4.1_ep00': device_add
[    9.571955] PM: Adding info for No Bus:usbdev4.1_ep00
[    9.577132] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    9.583931] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.591166] usb usb4: Product: UHCI Host Controller
[    9.596059] usb usb4: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty uhci_hcd
[    9.603986] usb usb4: SerialNumber: 0000:00:1d.2
[    9.608627] driver: '0000:00:1d.2': driver_bound: bound to device 'uhci_hcd'
[    9.615685] bus: 'pci': really_probe: bound device 0000:00:1d.2 to driver uhci_hcd
[    9.623268] bus: 'pci': driver_probe_device: matched device 0000:00:1d.3 with driver uhci_hcd
[    9.631802] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.3
[    9.639741] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    9.646892] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    9.652739] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    9.657989] device: 'usb_host5': device_add
[    9.662213] PM: Adding info for No Bus:usb_host5
[    9.666940] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    9.674356] uhci_hcd 0000:00:1d.3: detected 2 ports
[    9.679251] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[    9.685966] uhci_hcd 0000:00:1d.3: Performing full reset
[    9.691300] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
[    9.697092] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[    9.702919] usb usb5: default language 0x0409
[    9.707321] device: 'usb5': device_add
[    9.711143] bus: 'usb': add device usb5
[    9.715009] PM: Adding info for usb:usb5
[    9.718956] usb usb5: uevent
[    9.721943] bus: 'usb': driver_probe_device: matched device usb5 with driver usb
[    9.729354] bus: 'usb': really_probe: probing driver usb with device usb5
[    9.736157] usb usb5: usb_probe_device
[    9.739923] usb usb5: configuration #1 chosen from 1 choice
[    9.745519] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    9.751278] device: '5-0:1.0': device_add
[    9.755320] bus: 'usb': add device 5-0:1.0
[    9.759450] PM: Adding info for usb:5-0:1.0
[    9.763658] usb 5-0:1.0: uevent
[    9.766905] bus: 'usb': driver_probe_device: matched device 5-0:1.0 with driver hub
[    9.774575] bus: 'usb': really_probe: probing driver hub with device 5-0:1.0
[    9.781638] hub 5-0:1.0: usb_probe_interface
[    9.785924] hub 5-0:1.0: usb_probe_interface - got id
[    9.790989] hub 5-0:1.0: USB hub found
[    9.794767] hub 5-0:1.0: 2 ports detected
[    9.798793] hub 5-0:1.0: standalone hub
[    9.802646] hub 5-0:1.0: no power switching (usb 1.0)
[    9.807710] hub 5-0:1.0: individual port over-current protection
[    9.813726] hub 5-0:1.0: power on to power good time: 2ms
[    9.819150] hub 5-0:1.0: local power source is good
[    9.824042] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    9.830932] usb usb2: suspend_rh (auto-stop)
[    9.936082] driver: '5-0:1.0': driver_bound: bound to device 'hub'
[    9.936088] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    9.947777] bus: 'usb': really_probe: bound device 5-0:1.0 to driver hub
[    9.954493] device: 'usbdev5.1_ep81': device_add
[    9.959160] PM: Adding info for No Bus:usbdev5.1_ep81
[    9.964326] driver: 'usb5': driver_bound: bound to device 'usb'
[    9.970260] bus: 'usb': really_probe: bound device usb5 to driver usb
[    9.976729] device: 'usbdev5.1_ep00': device_add
[    9.981410] PM: Adding info for No Bus:usbdev5.1_ep00
[    9.986573] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    9.993373] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.000607] usb usb5: Product: UHCI Host Controller
[   10.005498] usb usb5: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty uhci_hcd
[   10.013425] usb usb5: SerialNumber: 0000:00:1d.3
[   10.018066] driver: '0000:00:1d.3': driver_bound: bound to device 'uhci_hcd'
[   10.025123] bus: 'pci': really_probe: bound device 0000:00:1d.3 to driver uhci_hcd
[   10.032820] initcall uhci_hcd_init+0x0/0xec returned 0 after 1610 msecs
[   10.039482] calling  i8259A_init_sysfs+0x0/0x22
[   10.044028] Registering sysdev class 'i8259'
[   10.048405] Registering sys device of class 'i8259'
[   10.053301] Registering sys device 'i82590'
[   10.057589] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 12 msecs
[   10.064424] calling  vsyscall_init+0x0/0x6c
[   10.068631] initcall vsyscall_init+0x0/0x6c returned 0 after 0 msecs
[   10.075050] calling  sbf_init+0x0/0xd5
[   10.078816] initcall sbf_init+0x0/0xd5 returned 0 after 0 msecs
[   10.084785] calling  i8237A_init_sysfs+0x0/0x22
[   10.089331] Registering sysdev class 'i8237'
[   10.093710] Registering sys device of class 'i8237'
[   10.098623] Registering sys device 'i82370'
[   10.102911] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 12 msecs
[   10.109748] calling  add_rtc_cmos+0x0/0x1d
[   10.113861] initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs
[   10.120174] calling  cache_sysfs_init+0x0/0x5c
[   10.125561] initcall cache_sysfs_init+0x0/0x5c returned 0 after 0 msecs
[   10.132225] calling  mce_init_device+0x0/0x78
[   10.136598] Registering sysdev class 'machinecheck'
[   10.141581] Registering sys device of class 'machinecheck'
[   10.147084] Registering sys device 'machinecheck0'
[   10.151995] Registering sys device of class 'machinecheck'
[   10.157499] Registering sys device 'machinecheck1'
[   10.162427] device: 'mcelog': device_add
[   10.166385] PM: Adding info for No Bus:mcelog
[   10.170855] initcall mce_init_device+0x0/0x78 returned 0 after 32 msecs
[   10.177518] calling  periodic_mcheck_init+0x0/0x3f
[   10.182330] initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs
[   10.189337] calling  thermal_throttle_init_device+0x0/0x7f
[   10.194857] initcall thermal_throttle_init_device+0x0/0x7f returned 0 after 0 msecs
[   10.202562] calling  threshold_init_device+0x0/0x42
[   10.207455] initcall threshold_init_device+0x0/0x42 returned 0 after 0 msecs
[   10.214549] calling  msr_init+0x0/0xed
[   10.218320] device class 'msr': registering
[   10.222616] device: 'msr0': device_add
[   10.226401] PM: Adding info for No Bus:msr0
[   10.230698] device: 'msr1': device_add
[   10.234489] PM: Adding info for No Bus:msr1
[   10.238779] initcall msr_init+0x0/0xed returned 0 after 19 msecs
[   10.244835] calling  cpuid_init+0x0/0xed
[   10.248778] device class 'cpuid': registering
[   10.253247] device: 'cpu0': device_add
[   10.257031] PM: Adding info for No Bus:cpu0
[   10.261328] device: 'cpu1': device_add
[   10.265112] PM: Adding info for No Bus:cpu1
[   10.269402] initcall cpuid_init+0x0/0xed returned 0 after 19 msecs
[   10.275630] calling  microcode_intel_module_init+0x0/0x45
[   10.281045] device: 'microcode': device_add
[   10.285261] PM: Adding info for No Bus:microcode
[   10.289986] Registering platform device 'microcode'. Parent at platform
[   10.296611] device: 'microcode': device_add
[   10.300822] bus: 'platform': add device microcode
[   10.305555] PM: Adding info for platform:microcode
[   10.310503] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk> <peter.oruba@amd.com>
[   10.319126] initcall microcode_intel_module_init+0x0/0x45<7>usb usb3: suspend_rh (auto-stop)
[   10.327635]  returned 0 after 36 msecs
[   10.331402] calling  init_lapic_sysfs+0x0/0x3f
[   10.335862] Registering sysdev class 'lapic'
[   10.340241] Registering sys device of class 'lapic'
[   10.345140] Registering sys device 'lapic0'
[   10.349429] initcall init_lapic_sysfs+0x0/0x3f returned 0 after 12 msecs
[   10.356178] calling  ioapic_init_sysfs+0x0/0x99
[   10.360724] Registering sysdev class 'ioapic'
[   10.365189] Registering sys device of class 'ioapic'
[   10.370173] Registering sys device 'ioapic0'
[   10.374549] initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 13 msecs
[   10.381384] calling  add_pcspkr+0x0/0x43
[   10.385325] Registering platform device 'pcspkr'. Parent at platform
[   10.391689] device: 'pcspkr': device_add
[   10.395634] bus: 'platform': add device pcspkr
[   10.400113] PM: Adding info for platform:pcspkr
[   10.404752] initcall add_pcspkr+0x0/0x43 returned 0 after 18 msecs
[   10.410977] calling  uv_ptc_init+0x0/0x75
[   10.415003] initcall uv_ptc_init+0x0/0x75 returned 0 after 0 msecs
[   10.421231] calling  uv_bau_init+0x0/0x4ec
[   10.425344] initcall uv_bau_init+0x0/0x4ec returned 0 after 0 msecs
[   10.431655] calling  audit_classes_init+0x0/0xaf
[   10.436298] initcall audit_classes_init+0x0/0xaf returned 0 after 0 msecs
[   10.443129] calling  debug_pagealloc_proc_init+0x0/0x2b
[   10.448388] initcall debug_pagealloc_proc_init+0x0/0x2b returned 0 after 0 msecs
[   10.455831] calling  pt_dump_init+0x0/0x30
[   10.459950] initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs
[   10.466265] calling  init+0x0/0x12
[   10.469695] initcall init+0x0/0x12 returned 0 after 0 msecs
[   10.475314] calling  init+0x0/0x12
[   10.478736] initcall init+0x0/0x12 returned 0 after 0 msecs
[   10.484358] calling  init_vdso_vars+0x0/0x1a7
[   10.488741] initcall init_vdso_vars+0x0/0x1a7 returned 0 after 0 msecs
[   10.495312] calling  ia32_binfmt_init+0x0/0x14
[   10.499773] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs
[   10.506437] calling  sysenter_setup+0x0/0x2c5
[   10.510814] initcall sysenter_setup+0x0/0x2c5 returned 0 after 0 msecs
[   10.517389] calling  init_sched_debug_procfs+0x0/0x2c
[   10.522465] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs
[   10.529738] calling  ioresources_init+0x0/0x36
[   10.534204] initcall ioresources_init+0x0/0x36 returned 0 after 0 msecs
[   10.543421] calling  uid_cache_init+0x0/0x6e
[   10.547721] initcall uid_cache_init+0x0/0x6e returned 0 after 0 msecs
[   10.554209] calling  init_posix_timers+0x0/0xfd
[   10.558761] initcall init_posix_timers+0x0/0xfd returned 0 after 0 msecs
[   10.565510] calling  init_posix_cpu_timers+0x0/0xd4
[   10.570416] initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 msecs
[   10.577509] calling  nsproxy_cache_init+0x0/0x2d
[   10.582148] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs
[   10.588982] calling  create_proc_profile+0x0/0x265
[   10.593802] initcall create_proc_profile+0x0/0x265 returned 0 after 0 msecs
[   10.600811] calling  timekeeping_init_device+0x0/0x22
[   10.605879] Registering sysdev class 'timekeeping'
[   10.610779] Registering sys device of class 'timekeeping'
[   10.616197] Registering sys device 'timekeeping0'
[   10.621008] initcall timekeeping_init_device+0x0/0x22 returned 0 after 14 msecs
[   10.628366] calling  init_clocksource_sysfs+0x0/0x50
[   10.633345] Registering sysdev class 'clocksource'
[   10.638250] Registering sys device of class 'clocksource'
[   10.643667] Registering sys device 'clocksource0'
[   10.648481] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 14 msecs
[   10.655753] calling  init_timer_list_procfs+0x0/0x2c
[   10.660738] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs
[   10.667916] calling  init_tstats_procfs+0x0/0x2c
[   10.672555] initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 msecs
[   10.679385] calling  lockdep_proc_init+0x0/0x3c
[   10.683947] initcall lockdep_proc_init+0x0/0x3c returned 0 after 0 msecs
[   10.690693] calling  futex_init+0x0/0x6a
[   10.694648] initcall futex_init+0x0/0x6a returned 0 after 0 msecs
[   10.700789] calling  proc_dma_init+0x0/0x22
[   10.704992] initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs
[   10.711391] calling  kallsyms_init+0x0/0x25
[   10.715594] initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs
[   10.721998] calling  backtrace_regression_test+0x0/0xfd
[   10.727237] ====[ backtrace testing ]===========
[   10.731868] Testing a backtrace from process context.
[   10.736934] The following trace is a kernel self test and not a bug!
[   10.743299] Pid: 1, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[   10.751054] Call Trace:
[   10.753522]  [<ffffffff802183e1>] ? paravirt_read_tsc+0x17/0x1a
[   10.759454]  [<ffffffff80270bd4>] backtrace_regression_test+0x3d/0xfd
[   10.765907]  [<ffffffff802640a0>] ? clocksource_read+0xc/0xe
[   10.771579]  [<ffffffff8026428f>] ? getnstimeofday+0x41/0xa3
[   10.777252]  [<ffffffff802614e9>] ? ktime_set+0x9/0x32
[   10.782405]  [<ffffffff80261584>] ? timespec_to_ktime+0x1a/0x1c
[   10.788337]  [<ffffffff80261d25>] ? ktime_get+0x23/0x25
[   10.793576]  [<ffffffff8020a05c>] do_one_initcall+0x4c/0x151
[   10.799249]  [<ffffffff8025b577>] ? start_workqueue_thread+0x2e/0x32
[   10.805614]  [<ffffffff8025b958>] ? __create_workqueue_key+0xd3/0x190
[   10.812066]  [<ffffffff81261a19>] kernel_init+0x1ba/0x22b
[   10.816306] hub 1-0:1.0: hub_suspend
[   10.816319] usb usb1: bus auto-suspend
[   10.816321] ehci_hcd 0000:00:1d.7: suspend root hub
[   10.816353] hub 2-0:1.0: hub_suspend
[   10.816356] usb usb2: bus auto-suspend
[   10.816358] usb usb2: suspend_rh
[   10.840314] usb usb4: suspend_rh (auto-stop)
[   10.844619]  [<ffffffff80212089>] child_rip+0xa/0x11
[   10.849598]  [<ffffffff8126185f>] ? kernel_init+0x0/0x22b
[   10.855011]  [<ffffffff8021207f>] ? child_rip+0x0/0x11
[   10.860163] Testing a backtrace from irq context.
[   10.864887] The following trace is a kernel self test and not a bug!
[   10.871258] Pid: 6, comm: ksoftirqd/1 Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[   10.879357] Call Trace:
[   10.881824]  <IRQ>  [<ffffffff80270b89>] backtrace_test_irq_callback+0xe/0x1c
[   10.889004]  [<ffffffff80250213>] tasklet_action+0x83/0xec
[   10.894502]  [<ffffffff8021256c>] ? call_softirq+0x1c/0x28
[   10.900002]  [<ffffffff8024fe84>] __do_softirq+0x6f/0xc5
[   10.905328]  [<ffffffff8024fad0>] ? ksoftirqd+0x0/0xb8
[   10.910480]  [<ffffffff8021256c>] call_softirq+0x1c/0x28
[   10.915805]  <EOI>  [<ffffffff80214bc4>] do_softirq+0x49/0x91
[   10.921601]  [<ffffffff8024fb18>] ksoftirqd+0x48/0xb8
[   10.926666]  [<ffffffff8025eecd>] kthread+0x4e/0x7d
[   10.931557]  [<ffffffff80212089>] child_rip+0xa/0x11
[   10.936535]  [<ffffffff8025ee7f>] ? kthread+0x0/0x7d
[   10.941514]  [<ffffffff8021207f>] ? child_rip+0x0/0x11
[   10.946671] Testing a saved backtrace.
[   10.950438] The following trace is a kernel self test and not a bug!
[   10.956802]  [<ffffffff8021cb47>] save_stack_trace+0x2f/0x50
[   10.962510]  [<ffffffff80270c72>] backtrace_regression_test+0xdb/0xfd
[   10.968996]  [<ffffffff8020a05c>] do_one_initcall+0x4c/0x151
[   10.974702]  [<ffffffff81261a19>] kernel_init+0x1ba/0x22b
[   10.980150]  [<ffffffff80212089>] child_rip+0xa/0x11
[   10.985167]  [<ffffffffffffffff>] 0xffffffffffffffff
[   10.990181] ====[ end of backtrace testing ]====
[   10.994812] initcall backtrace_regression_test+0x0/0xfd returned 0 after 255 msecs
[   11.002432] calling  pid_namespaces_init+0x0/0x2d
[   11.007158] initcall pid_namespaces_init+0x0/0x2d returned 0 after 0 msecs
[   11.014079] calling  audit_init+0x0/0x101
[   11.018105] audit: initializing netlink socket (disabled)
[   11.023547] type=2000 audit(1221047986.020:1): initialized
[   11.029051] audit: cannot initialize inotify handle
[   11.033945] initcall audit_init+0x0/0x101 returned 0 after 15 msecs
[   11.040256] calling  rcu_torture_init+0x0/0x627
[   11.044803] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1
[   11.059032] initcall rcu_torture_init+0x0/0x627 returned 0 after 13 msecs
[   11.065873] usb usb5: suspend_rh (auto-stop)
[   11.070170] calling  utsname_sysctl_init+0x0/0x14
[   11.074892] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs
[   11.081813] calling  init_lstats_procfs+0x0/0x25
[   11.086453] initcall init_lstats_procfs+0x0/0x25 returned 0 after 0 msecs
[   11.093287] calling  init_sched_switch_trace+0x0/0x41
[   11.098354] initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs
[   11.105626] calling  init_stack_trace+0x0/0x12
[   11.110084] initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs
[   11.116745] calling  init_function_trace+0x0/0x12
[   11.121468] initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs
[   11.128388] calling  stack_trace_init+0x0/0x84
[   11.132868] initcall stack_trace_init+0x0/0x84 returned 0 after 0 msecs
[   11.139526] calling  init_mmio_trace+0x0/0x12
[   11.143899] initcall init_mmio_trace+0x0/0x12 returned 0 after 0 msecs
[   11.150473] calling  init_per_zone_pages_min+0x0/0x45
[   11.155655] initcall init_per_zone_pages_min+0x0/0x45 returned 0 after 0 msecs
[   11.162925] calling  pdflush_init+0x0/0x1d
[   11.167144] initcall pdflush_init+0x0/0x1d returned 0 after 0 msecs
[   11.173459] calling  kswapd_init+0x0/0x4c
[   11.177549] initcall kswapd_init+0x0/0x4c returned 0 after 0 msecs
[   11.183775] calling  setup_vmstat+0x0/0x44
[   11.187890] initcall setup_vmstat+0x0/0x44 returned 0 after 0 msecs
[   11.194206] calling  mm_sysfs_init+0x0/0x29
[   11.198410] initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 msecs
[   11.204812] calling  procswaps_init+0x0/0x22
[   11.209103] initcall procswaps_init+0x0/0x22 returned 0 after 0 msecs
[   11.215588] calling  hugetlb_init+0x0/0x2a4
[   11.219791] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[   11.226171] initcall hugetlb_init+0x0/0x2a4 returned 0 after 6 msecs
[   11.232572] calling  init_tmpfs+0x0/0xda
[   11.236582] initcall init_tmpfs+0x0/0xda returned 0 after 0 msecs
[   11.242720] calling  slab_sysfs_init+0x0/0xf0
[   11.260500] initcall slab_sysfs_init+0x0/0xf0 returned 0 after 12 msecs
[   11.267164] calling  fasync_init+0x0/0x2a
[   11.271351] initcall fasync_init+0x0/0x2a returned 0 after 0 msecs
[   11.277582] calling  aio_setup+0x0/0x73
[   11.281849] initcall aio_setup+0x0/0x73 returned 0 after 0 msecs
[   11.287902] calling  init_sys32_ioctl+0x0/0x7c
[   11.292375] initcall init_sys32_ioctl+0x0/0x7c returned 0 after 0 msecs
[   11.299034] calling  init_mbcache+0x0/0x14
[   11.303147] initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs
[   11.309461] calling  dnotify_init+0x0/0x2a
[   11.313725] initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs
[   11.320037] calling  vmcore_init+0x0/0x8b5
[   11.324150] initcall vmcore_init+0x0/0x8b5 returned 0 after 0 msecs
[   11.330464] calling  configfs_init+0x0/0xb3
[   11.334842] initcall configfs_init+0x0/0xb3 returned 0 after 0 msecs
[   11.341245] calling  init_devpts_fs+0x0/0x40
[   11.345586] initcall init_devpts_fs+0x0/0x40 returned 0 after 0 msecs
[   11.352071] calling  init_dlm+0x0/0x88
[   11.356055] device: 'dlm-control': device_add
[   11.360453] PM: Adding info for No Bus:dlm-control
[   11.365373] device: 'dlm_plock': device_add
[   11.369591] PM: Adding info for No Bus:dlm_plock
[   11.374313] DLM (built Sep 10 2008 13:51:24) installed
[   11.379471] initcall init_dlm+0x0/0x88 returned 0 after 22 msecs
[   11.385527] calling  init_reiserfs_fs+0x0/0x95
[   11.390154] initcall init_reiserfs_fs+0x0/0x95 returned 0 after 0 msecs
[   11.396817] calling  init_ext3_fs+0x0/0x6a
[   11.401239] initcall init_ext3_fs+0x0/0x6a returned 0 after 0 msecs
[   11.407552] calling  journal_init+0x0/0x93
[   11.412264] initcall journal_init+0x0/0x93 returned 0 after 0 msecs
[   11.418580] calling  init_ext2_fs+0x0/0x5b
[   11.422844] initcall init_ext2_fs+0x0/0x5b returned 0 after 0 msecs
[   11.429160] calling  init_cramfs_fs+0x0/0x31
[   11.433467] initcall init_cramfs_fs+0x0/0x31 returned 0 after 0 msecs
[   11.439953] calling  init_ramfs_fs+0x0/0x12
[   11.444154] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 msecs
[   11.450556] calling  init_hugetlbfs_fs+0x0/0x98
[   11.455301] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 0 msecs
[   11.462052] calling  init_coda+0x0/0x13c
[   11.466154] device class 'coda': registering
[   11.470542] device: 'cfs0': device_add
[   11.474326] PM: Adding info for No Bus:cfs0
[   11.478625] device: 'cfs1': device_add
[   11.482416] PM: Adding info for No Bus:cfs1
[   11.489282] device: 'cfs2': device_add
[   11.493071] PM: Adding info for No Bus:cfs2
[   11.497364] device: 'cfs3': device_add
[   11.501151] PM: Adding info for No Bus:cfs3
[   11.505445] device: 'cfs4': device_add
[   11.509228] PM: Adding info for No Bus:cfs4
[   11.513526] initcall init_coda+0x0/0x13c returned 0 after 45 msecs
[   11.519754] calling  init_fat_fs+0x0/0x4f
[   11.524074] initcall init_fat_fs+0x0/0x4f returned 0 after 0 msecs
[   11.530304] calling  init_msdos_fs+0x0/0x12
[   11.534505] initcall init_msdos_fs+0x0/0x12 returned 0 after 0 msecs
[   11.540907] calling  init_hfsplus_fs+0x0/0x5d
[   11.545431] initcall init_hfsplus_fs+0x0/0x5d returned 0 after 0 msecs
[   11.552005] calling  init_hfs_fs+0x0/0x5d
[   11.556187] initcall init_hfs_fs+0x0/0x5d returned 0 after 0 msecs
[   11.562416] calling  vxfs_init+0x0/0x59
[   11.566423] initcall vxfs_init+0x0/0x59 returned 0 after 0 msecs
[   11.572479] calling  init_nfs_fs+0x0/0x113
[   11.577533] initcall init_nfs_fs+0x0/0x113 returned 0 after 0 msecs
[   11.583846] calling  init_nfsd+0x0/0xbb
[   11.587699] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.594866] initcall init_nfsd+0x0/0xbb returned 0 after 6 msecs
[   11.600922] calling  init_nlm+0x0/0x22
[   11.604690] initcall init_nlm+0x0/0x22 returned 0 after 0 msecs
[   11.610657] calling  init_nls_cp437+0x0/0x12
[   11.614948] initcall init_nls_cp437+0x0/0x12 returned 0 after 0 msecs
[   11.621436] calling  init_nls_cp737+0x0/0x12
[   11.625723] initcall init_nls_cp737+0x0/0x12 returned 0 after 0 msecs
[   11.632208] calling  init_nls_cp852+0x0/0x12
[   11.636498] initcall init_nls_cp852+0x0/0x12 returned 0 after 0 msecs
[   11.642983] calling  init_nls_cp855+0x0/0x12
[   11.647271] initcall init_nls_cp855+0x0/0x12 returned 0 after 0 msecs
[   11.653758] calling  init_nls_cp857+0x0/0x12
[   11.658044] initcall init_nls_cp857+0x0/0x12 returned 0 after 0 msecs
[   11.664531] calling  init_nls_cp863+0x0/0x12
[   11.668818] initcall init_nls_cp863+0x0/0x12 returned 0 after 0 msecs
[   11.675302] calling  init_nls_cp865+0x0/0x12
[   11.679589] initcall init_nls_cp865+0x0/0x12 returned 0 after 0 msecs
[   11.686076] calling  init_nls_cp866+0x0/0x12
[   11.690362] initcall init_nls_cp866+0x0/0x12 returned 0 after 0 msecs
[   11.696850] calling  init_nls_cp869+0x0/0x12
[   11.701136] initcall init_nls_cp869+0x0/0x12 returned 0 after 0 msecs
[   11.707621] calling  init_nls_cp874+0x0/0x12
[   11.711908] initcall init_nls_cp874+0x0/0x12 returned 0 after 0 msecs
[   11.718396] calling  init_nls_cp932+0x0/0x12
[   11.722682] initcall init_nls_cp932+0x0/0x12 returned 0 after 0 msecs
[   11.729169] calling  init_nls_euc_jp+0x0/0x48
[   11.733542] initcall init_nls_euc_jp+0x0/0x48 returned 0 after 0 msecs
[   11.740114] calling  init_nls_cp936+0x0/0x12
[   11.744401] initcall init_nls_cp936+0x0/0x12 returned 0 after 0 msecs
[   11.750885] calling  init_nls_cp949+0x0/0x12
[   11.755172] initcall init_nls_cp949+0x0/0x12 returned 0 after 0 msecs
[   11.761660] calling  init_nls_cp950+0x0/0x12
[   11.765946] initcall init_nls_cp950+0x0/0x12 returned 0 after 0 msecs
[   11.772433] calling  init_nls_cp1250+0x0/0x12
[   11.776805] initcall init_nls_cp1250+0x0/0x12 returned 0 after 0 msecs
[   11.783375] calling  init_nls_cp1251+0x0/0x12
[   11.787748] initcall init_nls_cp1251+0x0/0x12 returned 0 after 0 msecs
[   11.794321] calling  init_nls_ascii+0x0/0x12
[   11.798608] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 msecs
[   11.805095] calling  init_nls_iso8859_1+0x0/0x12
[   11.809726] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 msecs
[   11.816367] hub 3-0:1.0: hub_suspend
[   11.816374] usb usb3: bus auto-suspend
[   11.816376] usb usb3: suspend_rh
[   11.816395] hub 4-0:1.0: hub_suspend
[   11.816398] usb usb4: bus auto-suspend
[   11.816400] usb usb4: suspend_rh
[   11.837746] calling  init_nls_iso8859_2+0x0/0x12
[   11.842380] initcall init_nls_iso8859_2+0x0/0x12 returned 0 after 0 msecs
[   11.849215] calling  init_nls_iso8859_3+0x0/0x12
[   11.853849] initcall init_nls_iso8859_3+0x0/0x12 returned 0 after 0 msecs
[   11.860684] calling  init_nls_iso8859_5+0x0/0x12
[   11.865318] initcall init_nls_iso8859_5+0x0/0x12 returned 0 after 0 msecs
[   11.872150] calling  init_nls_iso8859_6+0x0/0x12
[   11.876782] initcall init_nls_iso8859_6+0x0/0x12 returned 0 after 0 msecs
[   11.883613] calling  init_nls_iso8859_7+0x0/0x12
[   11.888245] initcall init_nls_iso8859_7+0x0/0x12 returned 0 after 0 msecs
[   11.895083] calling  init_nls_cp1255+0x0/0x12
[   11.899456] initcall init_nls_cp1255+0x0/0x12 returned 0 after 0 msecs
[   11.906031] calling  init_nls_iso8859_13+0x0/0x12
[   11.910750] initcall init_nls_iso8859_13+0x0/0x12 returned 0 after 0 msecs
[   11.917670] calling  init_nls_iso8859_14+0x0/0x12
[   11.922390] initcall init_nls_iso8859_14+0x0/0x12 returned 0 after 0 msecs
[   11.929311] calling  init_nls_koi8_u+0x0/0x12
[   11.933683] initcall init_nls_koi8_u+0x0/0x12 returned 0 after 0 msecs
[   11.940253] calling  init_nls_koi8_ru+0x0/0x48
[   11.944712] initcall init_nls_koi8_ru+0x0/0x48 returned 0 after 0 msecs
[   11.951371] calling  init_nls_utf8+0x0/0x25
[   11.955572] initcall init_nls_utf8+0x0/0x25 returned 0 after 0 msecs
[   11.961973] calling  init_sysv_fs+0x0/0x4f
[   11.966255] initcall init_sysv_fs+0x0/0x4f returned 0 after 0 msecs
[   11.972570] calling  init_smb_fs+0x0/0x6c
[   11.976368] hub 5-0:1.0: hub_suspend
[   11.976372] usb usb5: bus auto-suspend
[   11.976373] usb usb5: suspend_rh
[   11.987507] initcall init_smb_fs+0x0/0x6c returned 0 after 0 msecs
[   11.993736] calling  init_cifs+0x0/0x517
[   11.998810] initcall init_cifs+0x0/0x517 returned 0 after 1 msecs
[   12.004959] calling  init_hpfs_fs+0x0/0x5a
[   12.009229] initcall init_hpfs_fs+0x0/0x5a returned 0 after 0 msecs
[   12.015542] calling  init_ufs_fs+0x0/0x5a
[   12.019724] initcall init_ufs_fs+0x0/0x5a returned 0 after 0 msecs
[   12.025954] calling  init_affs_fs+0x0/0x5a
[   12.030222] initcall init_affs_fs+0x0/0x5a returned 0 after 0 msecs
[   12.036536] calling  init_autofs_fs+0x0/0x12
[   12.040824] initcall init_autofs_fs+0x0/0x12 returned 0 after 0 msecs
[   12.047308] calling  init_autofs4_fs+0x0/0x12
[   12.051682] initcall init_autofs4_fs+0x0/0x12 returned -16 after 0 msecs
[   12.058432] initcall init_autofs4_fs+0x0/0x12 returned with error code -16 
[   12.065437] calling  init_adfs_fs+0x0/0x5a
[   12.069705] initcall init_adfs_fs+0x0/0x5a returned 0 after 0 msecs
[   12.076017] calling  fuse_init+0x0/0x11f
[   12.079958] fuse init (API version 7.9)
[   12.084128] device: 'fuse': device_add
[   12.087914] PM: Adding info for No Bus:fuse
[   12.092218] initcall fuse_init+0x0/0x11f returned 0 after 11 msecs
[   12.098447] calling  init_udf_fs+0x0/0x5a
[   12.102628] initcall init_udf_fs+0x0/0x5a returned 0 after 0 msecs
[   12.108857] calling  init_jfs_fs+0x0/0x2b0
[   12.113309] JFS: nTxBlock = 7438, nTxLock = 59505
[   12.123668] initcall init_jfs_fs+0x0/0x2b0 returned 0 after 10 msecs
[   12.130079] calling  init_xfs_fs+0x0/0xa9
[   12.134105] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   12.146962] SGI XFS Quota Management subsystem
[   12.151443] initcall init_xfs_fs+0x0/0xa9 returned 0 after 16 msecs
[   12.157761] calling  ocfs2_init+0x0/0x29c
[   12.161785] OCFS2 1.5.0
[   12.164680] initcall ocfs2_init+0x0/0x29c returned 0 after 2 msecs
[   12.170907] calling  ocfs2_stack_glue_init+0x0/0x95
[   12.175827] initcall ocfs2_stack_glue_init+0x0/0x95 returned 0 after 0 msecs
[   12.182919] calling  o2cb_stack_init+0x0/0x12
[   12.187292] ocfs2: Registered cluster interface o2cb
[   12.192276] initcall o2cb_stack_init+0x0/0x12 returned 0 after 4 msecs
[   12.198849] calling  init_o2nm+0x0/0x9a
[   12.202702] OCFS2 Node Manager 1.5.0
[   12.206629] initcall init_o2nm+0x0/0x9a returned 0 after 3 msecs
[   12.212685] calling  dlm_init+0x0/0x233
[   12.216537] OCFS2 DLM 1.5.0
[   12.219982] initcall dlm_init+0x0/0x233 returned 0 after 3 msecs
[   12.226054] calling  init_dlmfs_fs+0x0/0xd3
[   12.230253] OCFS2 DLMFS 1.5.0
[   12.233472] OCFS2 User DLM kernel interface loaded
[   12.238279] initcall init_dlmfs_fs+0x0/0xd3 returned 0 after 7 msecs
[   12.244681] calling  key_proc_init+0x0/0x33
[   12.248890] initcall key_proc_init+0x0/0x33 returned 0 after 0 msecs
[   12.255288] calling  crypto_algapi_init+0x0/0xd
[   12.259839] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs
[   12.266585] calling  blkcipher_module_init+0x0/0x2a
[   12.271480] initcall blkcipher_module_init+0x0/0x2a returned 0 after 0 msecs
[   12.278573] calling  seqiv_module_init+0x0/0x12
[   12.283119] initcall seqiv_module_init+0x0/0x12 returned 0 after 0 msecs
[   12.289865] calling  cryptomgr_init+0x0/0x12
[   12.294151] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 msecs
[   12.300639] calling  hmac_module_init+0x0/0x12
[   12.305109] initcall hmac_module_init+0x0/0x12 returned 0 after 0 msecs
[   12.311767] calling  crypto_null_mod_init+0x0/0x7b
[   12.316578] initcall crypto_null_mod_init+0x0/0x7b returned 0 after 0 msecs
[   12.323583] calling  md4_mod_init+0x0/0x12
[   12.327697] initcall md4_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.334011] calling  md5_mod_init+0x0/0x12
[   12.338124] initcall md5_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.344438] calling  rmd160_mod_init+0x0/0x12
[   12.348813] initcall rmd160_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.355385] calling  rmd256_mod_init+0x0/0x12
[   12.359759] initcall rmd256_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.366332] calling  sha1_generic_mod_init+0x0/0x12
[   12.371226] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.378320] calling  sha512_generic_mod_init+0x0/0x3f
[   12.383389] initcall sha512_generic_mod_init+0x0/0x3f returned 0 after 0 msecs
[   12.390661] calling  tgr192_mod_init+0x0/0x64
[   12.395037] initcall tgr192_mod_init+0x0/0x64 returned 0 after 0 msecs
[   12.401612] calling  crypto_ecb_module_init+0x0/0x12
[   12.406596] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 msecs
[   12.413776] calling  crypto_cbc_module_init+0x0/0x12
[   12.418756] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 msecs
[   12.425936] calling  crypto_pcbc_module_init+0x0/0x12
[   12.431001] initcall crypto_pcbc_module_init+0x0/0x12 returned 0 after 0 msecs
[   12.440827] calling  crypto_cts_module_init+0x0/0x12
[   12.445806] initcall crypto_cts_module_init+0x0/0x12 returned 0 after 0 msecs
[   12.452986] calling  crypto_module_init+0x0/0x12
[   12.457618] initcall crypto_module_init+0x0/0x12 returned 0 after 0 msecs
[   12.464452] calling  crypto_module_init+0x0/0x12
[   12.469085] initcall crypto_module_init+0x0/0x12 returned 0 after 0 msecs
[   12.475916] calling  crypto_ctr_module_init+0x0/0x3f
[   12.480898] initcall crypto_ctr_module_init+0x0/0x3f returned 0 after 0 msecs
[   12.488074] calling  crypto_gcm_module_init+0x0/0x5d
[   12.493057] initcall crypto_gcm_module_init+0x0/0x5d returned 0 after 0 msecs
[   12.500234] calling  crypto_ccm_module_init+0x0/0x5d
[   12.505219] initcall crypto_ccm_module_init+0x0/0x5d returned 0 after 0 msecs
[   12.512399] calling  des_generic_mod_init+0x0/0x3f
[   12.517207] initcall des_generic_mod_init+0x0/0x3f returned 0 after 0 msecs
[   12.524210] calling  fcrypt_mod_init+0x0/0x12
[   12.528584] initcall fcrypt_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.535154] calling  blowfish_mod_init+0x0/0x12
[   12.539701] initcall blowfish_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.546448] calling  twofish_mod_init+0x0/0x12
[   12.550909] initcall twofish_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.557570] calling  serpent_mod_init+0x0/0x3f
[   12.562033] initcall serpent_mod_init+0x0/0x3f returned 0 after 0 msecs
[   12.568694] calling  aes_init+0x0/0x2ce
[   12.572562] initcall aes_init+0x0/0x2ce returned 0 after 0 msecs
[   12.578614] calling  cast5_mod_init+0x0/0x12
[   12.582901] initcall cast5_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.589388] calling  cast6_mod_init+0x0/0x12
[   12.593676] initcall cast6_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.600160] calling  arc4_init+0x0/0x12
[   12.604015] initcall arc4_init+0x0/0x12 returned 0 after 0 msecs
[   12.610070] calling  tea_mod_init+0x0/0x64
[   12.614186] initcall tea_mod_init+0x0/0x64 returned 0 after 0 msecs
[   12.620500] calling  seed_init+0x0/0x12
[   12.624351] initcall seed_init+0x0/0x12 returned 0 after 0 msecs
[   12.630406] calling  salsa20_generic_mod_init+0x0/0x12
[   12.635560] initcall salsa20_generic_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.642915] calling  michael_mic_init+0x0/0x12
[   12.647377] initcall michael_mic_init+0x0/0x12 returned 0 after 0 msecs
[   12.654038] calling  crc32c_mod_init+0x0/0x3f
[   12.658412] initcall crc32c_mod_init+0x0/0x3f returned 0 after 0 msecs
[   12.664991] calling  crypto_authenc_module_init+0x0/0x12
[   12.670319] initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 msecs
[   12.677850] calling  lzo_mod_init+0x0/0x12
[   12.681964] initcall lzo_mod_init+0x0/0x12 returned 0 after 0 msecs
[   12.688274] calling  bsg_init+0x0/0x126
[   12.692287] device class 'bsg': registering
[   12.696593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[   12.704001] initcall bsg_init+0x0/0x126 returned 0 after 11 msecs
[   12.710144] calling  noop_init+0x0/0x14
[   12.714001] io scheduler noop registered
[   12.717940] initcall noop_init+0x0/0x14 returned 0 after 3 msecs
[   12.723992] calling  as_init+0x0/0x14
[   12.727671] io scheduler anticipatory registered
[   12.732302] initcall as_init+0x0/0x14 returned 0 after 4 msecs
[   12.738182] calling  cfq_init+0x0/0x94
[   12.742263] io scheduler cfq registered (default)
[   12.746985] initcall cfq_init+0x0/0x94 returned 0 after 4 msecs
[   12.752953] calling  init_kmp+0x0/0x12
[   12.756725] initcall init_kmp+0x0/0x12 returned 0 after 0 msecs
[   12.762692] calling  init_bm+0x0/0x12
[   12.766371] initcall init_bm+0x0/0x12 returned 0 after 0 msecs
[   12.772249] calling  init_fsm+0x0/0x12
[   12.776015] initcall init_fsm+0x0/0x12 returned 0 after 0 msecs
[   12.781983] calling  percpu_counter_startup+0x0/0x14
[   12.786965] initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs
[   12.794144] calling  pci_proc_init+0x0/0x6a
[   12.798530] initcall pci_proc_init+0x0/0x6a returned 0 after 0 msecs
[   12.804933] calling  pcie_portdrv_init+0x0/0x4c
[   12.809599] bus: 'pci_express': registered
[   12.813714] bus: 'pci': add driver pcieport-driver
[   12.818529] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver pcieport-driver
[   12.827670] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:01.0
[   12.836225] pcieport-driver 0000:00:01.0: setting latency timer to 64
[   12.842713] pcieport-driver 0000:00:01.0: found MSI capability
[   12.848560] pci_express 0000:00:01.0:pcie00: allocate port service
[   12.854753] device: '0000:00:01.0:pcie00': device_add
[   12.859825] bus: 'pci_express': add device 0000:00:01.0:pcie00
[   12.865681] PM: Adding info for pci_express:0000:00:01.0:pcie00
[   12.871714] pci_express 0000:00:01.0:pcie03: allocate port service
[   12.877907] device: '0000:00:01.0:pcie03': device_add
[   12.882980] bus: 'pci_express': add device 0000:00:01.0:pcie03
[   12.888844] PM: Adding info for pci_express:0000:00:01.0:pcie03
[   12.894912] driver: '0000:00:01.0': driver_bound: bound to device 'pcieport-driver'
[   12.902582] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver pcieport-driver
[   12.910773] bus: 'pci': driver_probe_device: matched device 0000:00:1c.0 with driver pcieport-driver
[   12.919918] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:1c.0
[   12.928467] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[   12.934952] pcieport-driver 0000:00:1c.0: found MSI capability
[   12.940799] pci_express 0000:00:1c.0:pcie00: allocate port service
[   12.946991] device: '0000:00:1c.0:pcie00': device_add
[   12.952061] bus: 'pci_express': add device 0000:00:1c.0:pcie00
[   12.957922] PM: Adding info for pci_express:0000:00:1c.0:pcie00
[   12.963952] pci_express 0000:00:1c.0:pcie02: allocate port service
[   12.970146] device: '0000:00:1c.0:pcie02': device_add
[   12.975224] bus: 'pci_express': add device 0000:00:1c.0:pcie02
[   12.981080] PM: Adding info for pci_express:0000:00:1c.0:pcie02
[   12.987111] pci_express 0000:00:1c.0:pcie03: allocate port service
[   12.993304] device: '0000:00:1c.0:pcie03': device_add
[   12.998375] bus: 'pci_express': add device 0000:00:1c.0:pcie03
[   13.004231] PM: Adding info for pci_express:0000:00:1c.0:pcie03
[   13.010302] driver: '0000:00:1c.0': driver_bound: bound to device 'pcieport-driver'
[   13.017972] bus: 'pci': really_probe: bound device 0000:00:1c.0 to driver pcieport-driver
[   13.026161] bus: 'pci': driver_probe_device: matched device 0000:00:1c.4 with driver pcieport-driver
[   13.035301] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:1c.4
[   13.043850] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[   13.050335] pcieport-driver 0000:00:1c.4: found MSI capability
[   13.056181] pci_express 0000:00:1c.4:pcie00: allocate port service
[   13.062373] device: '0000:00:1c.4:pcie00': device_add
[   13.067444] bus: 'pci_express': add device 0000:00:1c.4:pcie00
[   13.073305] PM: Adding info for pci_express:0000:00:1c.4:pcie00
[   13.079335] pci_express 0000:00:1c.4:pcie02: allocate port service
[   13.085528] device: '0000:00:1c.4:pcie02': device_add
[   13.090598] bus: 'pci_express': add device 0000:00:1c.4:pcie02
[   13.096454] PM: Adding info for pci_express:0000:00:1c.4:pcie02
[   13.102483] pci_express 0000:00:1c.4:pcie03: allocate port service
[   13.108676] device: '0000:00:1c.4:pcie03': device_add
[   13.113747] bus: 'pci_express': add device 0000:00:1c.4:pcie03
[   13.119602] PM: Adding info for pci_express:0000:00:1c.4:pcie03
[   13.125671] driver: '0000:00:1c.4': driver_bound: bound to device 'pcieport-driver'
[   13.133340] bus: 'pci': really_probe: bound device 0000:00:1c.4 to driver pcieport-driver
[   13.141530] bus: 'pci': driver_probe_device: matched device 0000:00:1c.5 with driver pcieport-driver
[   13.150669] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:1c.5
[   13.159219] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[   13.165703] pcieport-driver 0000:00:1c.5: found MSI capability
[   13.171551] pci_express 0000:00:1c.5:pcie00: allocate port service
[   13.177746] device: '0000:00:1c.5:pcie00': device_add
[   13.182817] bus: 'pci_express': add device 0000:00:1c.5:pcie00
[   13.188672] PM: Adding info for pci_express:0000:00:1c.5:pcie00
[   13.194702] pci_express 0000:00:1c.5:pcie02: allocate port service
[   13.200895] device: '0000:00:1c.5:pcie02': device_add
[   13.205969] bus: 'pci_express': add device 0000:00:1c.5:pcie02
[   13.211832] PM: Adding info for pci_express:0000:00:1c.5:pcie02
[   13.217861] pci_express 0000:00:1c.5:pcie03: allocate port service
[   13.224055] device: '0000:00:1c.5:pcie03': device_add
[   13.229126] bus: 'pci_express': add device 0000:00:1c.5:pcie03
[   13.234982] PM: Adding info for pci_express:0000:00:1c.5:pcie03
[   13.241051] driver: '0000:00:1c.5': driver_bound: bound to device 'pcieport-driver'
[   13.248720] bus: 'pci': really_probe: bound device 0000:00:1c.5 to driver pcieport-driver
[   13.257030] initcall pcie_portdrv_init+0x0/0x4c returned 0 after 426 msecs
[   13.263949] calling  aer_service_init+0x0/0x20
[   13.268408] bus: 'pci_express': add driver aer
[   13.272981] initcall aer_service_init+0x0/0x20 returned 0 after 4 msecs
[   13.279640] calling  pci_hotplug_init+0x0/0x4e
[   13.284100] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   13.289686] initcall pci_hotplug_init+0x0/0x4e returned 0 after 5 msecs
[   13.296344] calling  acpiphp_init+0x0/0x5f
[   13.300456] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[   13.311196] acpiphp_glue: can't get bus number, assuming 0
[   13.317093] initcall acpiphp_init+0x0/0x5f returned -19 after 15 msecs
[   13.323664] calling  ibm_acpiphp_init+0x0/0x16f
[   13.332407] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[   13.338862] initcall ibm_acpiphp_init+0x0/0x16f returned -19 after 10 msecs
[   13.345870] calling  zt5550_init+0x0/0x7c
[   13.349896] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[   13.356695] bus: 'pci': add driver zt5550_hc
[   13.361113] initcall zt5550_init+0x0/0x7c returned 0 after 10 msecs
[   13.367425] calling  cpcihp_generic_init+0x0/0x426
[   13.372230] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[   13.379985] cpcihp_generic: not configured, disabling.
[   13.387694] initcall cpcihp_generic_init+0x0/0x426 returned -22 after 14 msecs
[   13.394964] initcall cpcihp_generic_init+0x0/0x426 returned with error code -22 
[   13.402407] calling  pcied_init+0x0/0x7b
[   13.406346] bus: 'pci_express': add driver hpdriver
[   13.411247] bus: 'pci_express': driver_probe_device: matched device 0000:00:1c.0:pcie02 with driver hpdriver
[   13.421081] bus: 'pci_express': really_probe: probing driver hpdriver with device 0000:00:1c.0:pcie02
[   13.430441] bus: 'pci_express': driver_probe_device: matched device 0000:00:1c.4:pcie02 with driver hpdriver
[   13.440280] bus: 'pci_express': really_probe: probing driver hpdriver with device 0000:00:1c.4:pcie02
[   13.449625] bus: 'pci_express': driver_probe_device: matched device 0000:00:1c.5:pcie02 with driver hpdriver
[   13.459459] bus: 'pci_express': really_probe: probing driver hpdriver with device 0000:00:1c.5:pcie02
[   13.468899] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   13.475527] initcall pcied_init+0x0/0x7b returned 0 after 65 msecs
[   13.481753] calling  shpcd_init+0x0/0x62
[   13.485692] bus: 'pci': add driver shpchp
[   13.489847] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.496561] initcall shpcd_init+0x0/0x62 returned 0 after 10 msecs
[   13.502785] calling  dummyphp_init+0x0/0x97
[   13.506983] fakephp: Fake PCI Hot Plug Controller Driver
[   13.512380] pci_create_slot: created pci_slot on 0000:00:00
[   13.518080] pci_create_slot: created pci_slot on 0000:00:01
[   13.523770] pci_create_slot: created pci_slot on 0000:00:1b
[   13.529462] pci_create_slot: created pci_slot on 0000:00:1c
[   13.535156] pci_create_slot: created pci_slot on 0000:00:1d
[   13.540855] pci_create_slot: created pci_slot on 0000:00:1e
[   13.546551] pci_create_slot: created pci_slot on 0000:00:1f
[   13.552256] pci_create_slot: created pci_slot on 0000:01:00
[   13.557950] pci_create_slot: created pci_slot on 0000:02:00
[   13.563641] pci_create_slot: created pci_slot on 0000:04:00
[   13.569333] pci_create_slot: created pci_slot on 0000:05:02
[   13.575033] pci_create_slot: created pci_slot on 0000:05:04
[   13.580722] pci_create_slot: created pci_slot on 0000:05:05
[   13.586406] initcall dummyphp_init+0x0/0x97 returned 0 after 75 msecs
[   13.592896] calling  corgibl_init+0x0/0x12
[   13.597010] bus: 'platform': add driver generic-bl
[   13.601920] initcall corgibl_init+0x0/0x12 returned 0 after 4 msecs
[   13.608232] calling  mbp_init+0x0/0xe3
[   13.611999] initcall mbp_init+0x0/0xe3 returned -19 after 0 msecs
[   13.618141] calling  display_class_init+0x0/0x7e
[   13.622773] device class 'display': registering
[   13.627417] initcall display_class_init+0x0/0x7e returned 0 after 4 msecs
[   13.634253] calling  arcfb_init+0x0/0x74
[   13.638192] initcall arcfb_init+0x0/0x74 returned -6 after 0 msecs
[   13.644419] initcall arcfb_init+0x0/0x74 returned with error code -6 
[   13.650908] calling  pm2fb_init+0x0/0x159
[   13.654936] bus: 'pci': add driver pm2fb
[   13.659010] initcall pm2fb_init+0x0/0x159 returned 0 after 3 msecs
[   13.665240] calling  pm3fb_init+0x0/0x115
[   13.669267] bus: 'pci': add driver pm3fb
[   13.673334] initcall pm3fb_init+0x0/0x115 returned 0 after 3 msecs
[   13.679561] calling  matroxfb_init+0x0/0x9b3
[   13.683848] bus: 'pci': add driver matroxfb
[   13.688177] initcall matroxfb_init+0x0/0x9b3 returned 0 after 4 msecs
[   13.694670] calling  rivafb_init+0x0/0x1e1
[   13.698783] rivafb_setup START
[   13.701856] bus: 'pci': add driver rivafb
[   13.706014] initcall rivafb_init+0x0/0x1e1 returned 0 after 6 msecs
[   13.712326] calling  nvidiafb_init+0x0/0x2c3
[   13.716614] bus: 'pci': add driver nvidiafb
[   13.720938] initcall nvidiafb_init+0x0/0x2c3 returned 0 after 4 msecs
[   13.727425] calling  sisfb_init+0x0/0x7dd
[   13.731452] bus: 'pci': add driver sisfb
[   13.735526] initcall sisfb_init+0x0/0x7dd returned 0 after 3 msecs
[   13.741756] calling  kyrofb_init+0x0/0xf6
[   13.745783] bus: 'pci': add driver kyrofb
[   13.749949] initcall kyrofb_init+0x0/0xf6 returned 0 after 3 msecs
[   13.756175] calling  savagefb_init+0x0/0x77
[   13.760374] bus: 'pci': add driver savagefb
[   13.764710] initcall savagefb_init+0x0/0x77 returned 0 after 4 msecs
[   13.771110] calling  gx1fb_init+0x0/0x130
[   13.775138] bus: 'pci': add driver gx1fb
[   13.779206] initcall gx1fb_init+0x0/0x130 returned 0 after 3 msecs
[   13.785435] calling  gxfb_init+0x0/0x84
[   13.789289] bus: 'pci': add driver gxfb
[   13.793270] initcall gxfb_init+0x0/0x84 returned 0 after 3 msecs
[   13.799323] calling  tdfxfb_init+0x0/0x12f
[   13.803436] bus: 'pci': add driver tdfxfb
[   13.807598] initcall tdfxfb_init+0x0/0x12f returned 0 after 3 msecs
[   13.813914] calling  tridentfb_init+0x0/0x21c
[   13.818286] bus: 'pci': add driver tridentfb
[   13.822703] initcall tridentfb_init+0x0/0x21c returned 0 after 4 msecs
[   13.829278] calling  vmlfb_init+0x0/0x96
[   13.833216] vmlfb: initializing
[   13.836374] bus: 'pci': add driver vmlfb
[   13.840443] initcall vmlfb_init+0x0/0x96 returned 0 after 6 msecs
[   13.846586] calling  s3fb_init+0x0/0xf4
[   13.850439] bus: 'pci': add driver s3fb
[   13.854422] initcall s3fb_init+0x0/0xf4 returned 0 after 3 msecs
[   13.860478] calling  arkfb_init+0x0/0x59
[   13.864414] bus: 'pci': add driver arkfb
[   13.868486] initcall arkfb_init+0x0/0x59 returned 0 after 3 msecs
[   13.874627] calling  hgafb_init+0x0/0x6b
[   13.878565] bus: 'platform': add driver hgafb
[   13.883051] Registering platform device 'hgafb.0'. Parent at platform
[   13.889504] device: 'hgafb.0': device_add
[   13.893537] bus: 'platform': add device hgafb.0
[   13.898095] PM: Adding info for platform:hgafb.0
[   13.902821] bus: 'platform': driver_probe_device: matched device hgafb.0 with driver hgafb
[   13.911097] bus: 'platform': really_probe: probing driver hgafb with device hgafb.0
[   13.918776] hgafb: HGA card not detected.
[   13.922810] hgafb: probe of hgafb.0 failed with error -22
[   13.928224] initcall hgafb_init+0x0/0x6b returned 0 after 47 msecs
[   13.934452] calling  xenfb_init+0x0/0x58
[   13.938391] initcall xenfb_init+0x0/0x58 returned -19 after 0 msecs
[   13.944708] calling  carminefb_init+0x0/0x39
[   13.948997] bus: 'pci': add driver carminefb
[   13.953412] initcall carminefb_init+0x0/0x39 returned 0 after 4 msecs
[   13.959898] calling  uvesafb_init+0x0/0x3e7
[   13.964103] bus: 'platform': add driver uvesafb
[   13.968754] Registering platform device 'uvesafb.0'. Parent at platform
[   13.975380] device: 'uvesafb.0': device_add
[   13.979585] bus: 'platform': add device uvesafb.0
[   13.984316] PM: Adding info for platform:uvesafb.0
[   13.989216] bus: 'platform': driver_probe_device: matched device uvesafb.0 with driver uvesafb
[   13.997839] bus: 'platform': really_probe: probing driver uvesafb with device uvesafb.0
[   14.005996] uvesafb: failed to execute /sbin/v86d
[   14.010717] uvesafb: make sure that the v86d helper is installed and executable
[   14.018042] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[   14.024668] uvesafb: vbe_init() failed with -22
[   14.029224] uvesafb: probe of uvesafb.0 failed with error -22
[   14.034988] initcall uvesafb_init+0x0/0x3e7 returned 0 after 67 msecs
[   14.041476] calling  imacfb_init+0x0/0x1de
[   14.045589] initcall imacfb_init+0x0/0x1de returned -19 after 0 msecs
[   14.052074] calling  acpi_reserve_resources+0x0/0xeb
[   14.057058] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs
[   14.064236] calling  acpi_ac_init+0x0/0x45
[   14.068362] bus: 'acpi': add driver ac
[   14.072307] initcall acpi_ac_init+0x0/0x45 returned 0 after 3 msecs
[   14.078624] calling  acpi_fan_init+0x0/0x5e
[   14.082827] bus: 'acpi': add driver fan
[   14.086839] initcall acpi_fan_init+0x0/0x5e returned 0 after 3 msecs
[   14.093243] calling  irqrouter_init_sysfs+0x0/0x38
[   14.098047] Registering sysdev class 'irqrouter'
[   14.102777] Registering sys device of class 'irqrouter'
[   14.108020] Registering sys device 'irqrouter0'
[   14.112655] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 13 msecs
[   14.119748] calling  acpi_pci_slot_init+0x0/0x20
[   14.124867] initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 0 msecs
[   14.131700] calling  asus_acpi_init+0x0/0xfe
[   14.135992] bus: 'acpi': add driver asus_acpi
[   14.140535] bus: 'acpi': remove driver asus_acpi
[   14.145262] driver: 'asus_acpi': driver_release
[   14.149820] initcall asus_acpi_init+0x0/0xfe returned -19 after 13 msecs
[   14.156567] calling  toshiba_acpi_init+0x0/0x183
[   14.161209] initcall toshiba_acpi_init+0x0/0x183 returned -19 after 0 msecs
[   14.168218] calling  rand_initialize+0x0/0x31
[   14.172605] initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs
[   14.179177] calling  tty_init+0x0/0x1cd
[   14.183035] device: 'tty': device_add
[   14.186738] PM: Adding info for No Bus:tty
[   14.190954] device: 'console': device_add
[   14.194998] PM: Adding info for No Bus:console
[   14.199554] device: 'ptmx': device_add
[   14.203351] PM: Adding info for No Bus:ptmx
[   14.207648] device: 'tty0': device_add
[   14.211433] PM: Adding info for No Bus:tty0
[   14.215728] device class 'vc': registering
[   14.219944] device: 'vcs': device_add
[   14.223641] PM: Adding info for No Bus:vcs
[   14.227854] device: 'vcsa': device_add
[   14.231644] PM: Adding info for No Bus:vcsa
[   14.235950] device: 'tty1': device_add
[   14.239735] PM: Adding info for No Bus:tty1
[   14.244028] device: 'tty2': device_add
[   14.247810] PM: Adding info for No Bus:tty2
[   14.252105] device: 'tty3': device_add
[   14.255887] PM: Adding info for No Bus:tty3
[   14.260180] device: 'tty4': device_add
[   14.266524] PM: Adding info for No Bus:tty4
[   14.270820] device: 'tty5': device_add
[   14.274602] PM: Adding info for No Bus:tty5
[   14.278896] device: 'tty6': device_add
[   14.282678] PM: Adding info for No Bus:tty6
[   14.286984] device: 'tty7': device_add
[   14.290769] PM: Adding info for No Bus:tty7
[   14.295062] device: 'tty8': device_add
[   14.298852] PM: Adding info for No Bus:tty8
[   14.303147] device: 'tty9': device_add
[   14.306938] PM: Adding info for No Bus:tty9
[   14.311231] device: 'tty10': device_add
[   14.315101] PM: Adding info for No Bus:tty10
[   14.319481] device: 'tty11': device_add
[   14.323357] PM: Adding info for No Bus:tty11
[   14.327738] device: 'tty12': device_add
[   14.331609] PM: Adding info for No Bus:tty12
[   14.335989] device: 'tty13': device_add
[   14.339859] PM: Adding info for No Bus:tty13
[   14.344240] device: 'tty14': device_add
[   14.348110] PM: Adding info for No Bus:tty14
[   14.352490] device: 'tty15': device_add
[   14.356370] PM: Adding info for No Bus:tty15
[   14.360751] device: 'tty16': device_add
[   14.364622] PM: Adding info for No Bus:tty16
[   14.369002] device: 'tty17': device_add
[   14.372873] PM: Adding info for No Bus:tty17
[   14.377253] device: 'tty18': device_add
[   14.381123] PM: Adding info for No Bus:tty18
[   14.385504] device: 'tty19': device_add
[   14.389380] PM: Adding info for No Bus:tty19
[   14.393761] device: 'tty20': device_add
[   14.397632] PM: Adding info for No Bus:tty20
[   14.402013] device: 'tty21': device_add
[   14.405892] PM: Adding info for No Bus:tty21
[   14.410273] device: 'tty22': device_add
[   14.414144] PM: Adding info for No Bus:tty22
[   14.418524] device: 'tty23': device_add
[   14.422401] PM: Adding info for No Bus:tty23
[   14.426782] device: 'tty24': device_add
[   14.430653] PM: Adding info for No Bus:tty24
[   14.435034] device: 'tty25': device_add
[   14.438905] PM: Adding info for No Bus:tty25
[   14.443285] device: 'tty26': device_add
[   14.447161] PM: Adding info for No Bus:tty26
[   14.451543] device: 'tty27': device_add
[   14.455421] PM: Adding info for No Bus:tty27
[   14.459802] device: 'tty28': device_add
[   14.463677] PM: Adding info for No Bus:tty28
[   14.468057] device: 'tty29': device_add
[   14.471928] PM: Adding info for No Bus:tty29
[   14.476309] device: 'tty30': device_add
[   14.480185] PM: Adding info for No Bus:tty30
[   14.484571] device: 'tty31': device_add
[   14.488438] PM: Adding info for No Bus:tty31
[   14.492820] device: 'tty32': device_add
[   14.496691] PM: Adding info for No Bus:tty32
[   14.501073] device: 'tty33': device_add
[   14.504943] PM: Adding info for No Bus:tty33
[   14.509323] device: 'tty34': device_add
[   14.513209] PM: Adding info for No Bus:tty34
[   14.517590] device: 'tty35': device_add
[   14.521461] PM: Adding info for No Bus:tty35
[   14.525858] device: 'tty36': device_add
[   14.529730] PM: Adding info for No Bus:tty36
[   14.534110] device: 'tty37': device_add
[   14.537988] PM: Adding info for No Bus:tty37
[   14.542368] device: 'tty38': device_add
[   14.546240] PM: Adding info for No Bus:tty38
[   14.550620] device: 'tty39': device_add
[   14.554491] PM: Adding info for No Bus:tty39
[   14.558871] device: 'tty40': device_add
[   14.562743] PM: Adding info for No Bus:tty40
[   14.567123] device: 'tty41': device_add
[   14.571000] PM: Adding info for No Bus:tty41
[   14.575381] device: 'tty42': device_add
[   14.579253] PM: Adding info for No Bus:tty42
[   14.583633] device: 'tty43': device_add
[   14.587504] PM: Adding info for No Bus:tty43
[   14.591884] device: 'tty44': device_add
[   14.595755] PM: Adding info for No Bus:tty44
[   14.600135] device: 'tty45': device_add
[   14.604014] PM: Adding info for No Bus:tty45
[   14.608394] device: 'tty46': device_add
[   14.612266] PM: Adding info for No Bus:tty46
[   14.616646] device: 'tty47': device_add
[   14.620527] PM: Adding info for No Bus:tty47
[   14.624908] device: 'tty48': device_add
[   14.628779] PM: Adding info for No Bus:tty48
[   14.633159] device: 'tty49': device_add
[   14.637037] PM: Adding info for No Bus:tty49
[   14.641418] device: 'tty50': device_add
[   14.645289] PM: Adding info for No Bus:tty50
[   14.649669] device: 'tty51': device_add
[   14.653541] PM: Adding info for No Bus:tty51
[   14.657921] device: 'tty52': device_add
[   14.661799] PM: Adding info for No Bus:tty52
[   14.666180] device: 'tty53': device_add
[   14.670052] PM: Adding info for No Bus:tty53
[   14.674432] device: 'tty54': device_add
[   14.678304] PM: Adding info for No Bus:tty54
[   14.682684] device: 'tty55': device_add
[   14.686570] PM: Adding info for No Bus:tty55
[   14.690951] device: 'tty56': device_add
[   14.694836] PM: Adding info for No Bus:tty56
[   14.699217] device: 'tty57': device_add
[   14.703090] PM: Adding info for No Bus:tty57
[   14.707470] device: 'tty58': device_add
[   14.711341] PM: Adding info for No Bus:tty58
[   14.715722] device: 'tty59': device_add
[   14.719597] PM: Adding info for No Bus:tty59
[   14.723977] device: 'tty60': device_add
[   14.727863] PM: Adding info for No Bus:tty60
[   14.732244] device: 'tty61': device_add
[   14.736115] PM: Adding info for No Bus:tty61
[   14.740496] device: 'tty62': device_add
[   14.744368] PM: Adding info for No Bus:tty62
[   14.748747] device: 'tty63': device_add
[   14.752626] PM: Adding info for No Bus:tty63
[   14.757067] initcall tty_init+0x0/0x1cd returned 0 after 547 msecs
[   14.763295] calling  pty_init+0x0/0x462
[   14.767175] device: 'ptyp0': device_add
[   14.771046] PM: Adding info for No Bus:ptyp0
[   14.775430] device: 'ptyp1': device_add
[   14.779301] PM: Adding info for No Bus:ptyp1
[   14.783682] device: 'ptyp2': device_add
[   14.787553] PM: Adding info for No Bus:ptyp2
[   14.791933] device: 'ptyp3': device_add
[   14.795811] PM: Adding info for No Bus:ptyp3
[   14.800191] device: 'ptyp4': device_add
[   14.804063] PM: Adding info for No Bus:ptyp4
[   14.808444] device: 'ptyp5': device_add
[   14.812316] PM: Adding info for No Bus:ptyp5
[   14.816696] device: 'ptyp6': device_add
[   14.820567] PM: Adding info for No Bus:ptyp6
[   14.824945] device: 'ptyp7': device_add
[   14.828823] PM: Adding info for No Bus:ptyp7
[   14.833204] device: 'ptyp8': device_add
[   14.837084] PM: Adding info for No Bus:ptyp8
[   14.841464] device: 'ptyp9': device_add
[   14.845345] PM: Adding info for No Bus:ptyp9
[   14.849725] device: 'ptypa': device_add
[   14.853597] PM: Adding info for No Bus:ptypa
[   14.857977] device: 'ptypb': device_add
[   14.861855] PM: Adding info for No Bus:ptypb
[   14.866236] device: 'ptypc': device_add
[   14.870108] PM: Adding info for No Bus:ptypc
[   14.874487] device: 'ptypd': device_add
[   14.878359] PM: Adding info for No Bus:ptypd
[   14.882739] device: 'ptype': device_add
[   14.886617] PM: Adding info for No Bus:ptype
[   14.890998] device: 'ptypf': device_add
[   14.894870] PM: Adding info for No Bus:ptypf
[   14.899249] device: 'ptyq0': device_add
[   14.903121] PM: Adding info for No Bus:ptyq0
[   14.907501] device: 'ptyq1': device_add
[   14.911373] PM: Adding info for No Bus:ptyq1
[   14.915752] device: 'ptyq2': device_add
[   14.919631] PM: Adding info for No Bus:ptyq2
[   14.924012] device: 'ptyq3': device_add
[   14.927884] PM: Adding info for No Bus:ptyq3
[   14.932264] device: 'ptyq4': device_add
[   14.936135] PM: Adding info for No Bus:ptyq4
[   14.940515] device: 'ptyq5': device_add
[   14.944397] PM: Adding info for No Bus:ptyq5
[   14.948777] device: 'ptyq6': device_add
[   14.952655] PM: Adding info for No Bus:ptyq6
[   14.957034] device: 'ptyq7': device_add
[   14.960906] PM: Adding info for No Bus:ptyq7
[   14.965289] device: 'ptyq8': device_add
[   14.969161] PM: Adding info for No Bus:ptyq8
[   14.973542] device: 'ptyq9': device_add
[   14.977420] PM: Adding info for No Bus:ptyq9
[   14.981800] device: 'ptyqa': device_add
[   14.985673] PM: Adding info for No Bus:ptyqa
[   14.990053] device: 'ptyqb': device_add
[   14.993925] PM: Adding info for No Bus:ptyqb
[   14.998305] device: 'ptyqc': device_add
[   15.002178] PM: Adding info for No Bus:ptyqc
[   15.006574] device: 'ptyqd': device_add
[   15.013009] PM: Adding info for No Bus:ptyqd
[   15.017389] device: 'ptyqe': device_add
[   15.021262] PM: Adding info for No Bus:ptyqe
[   15.025642] device: 'ptyqf': device_add
[   15.029514] PM: Adding info for No Bus:ptyqf
[   15.033894] device: 'ptyr0': device_add
[   15.037766] PM: Adding info for No Bus:ptyr0
[   15.042146] device: 'ptyr1': device_add
[   15.046028] PM: Adding info for No Bus:ptyr1
[   15.050409] device: 'ptyr2': device_add
[   15.054290] PM: Adding info for No Bus:ptyr2
[   15.058671] device: 'ptyr3': device_add
[   15.062544] PM: Adding info for No Bus:ptyr3
[   15.066923] device: 'ptyr4': device_add
[   15.070796] PM: Adding info for No Bus:ptyr4
[   15.075176] device: 'ptyr5': device_add
[   15.079055] PM: Adding info for No Bus:ptyr5
[   15.083435] device: 'ptyr6': device_add
[   15.087308] PM: Adding info for No Bus:ptyr6
[   15.091688] device: 'ptyr7': device_add
[   15.095561] PM: Adding info for No Bus:ptyr7
[   15.099940] device: 'ptyr8': device_add
[   15.103819] PM: Adding info for No Bus:ptyr8
[   15.108199] device: 'ptyr9': device_add
[   15.112072] PM: Adding info for No Bus:ptyr9
[   15.116452] device: 'ptyra': device_add
[   15.120324] PM: Adding info for No Bus:ptyra
[   15.124703] device: 'ptyrb': device_add
[   15.128576] PM: Adding info for No Bus:ptyrb
[   15.132955] device: 'ptyrc': device_add
[   15.136834] PM: Adding info for No Bus:ptyrc
[   15.141214] device: 'ptyrd': device_add
[   15.145088] PM: Adding info for No Bus:ptyrd
[   15.149468] device: 'ptyre': device_add
[   15.153340] PM: Adding info for No Bus:ptyre
[   15.157721] device: 'ptyrf': device_add
[   15.161604] PM: Adding info for No Bus:ptyrf
[   15.165983] device: 'ptys0': device_add
[   15.169863] PM: Adding info for No Bus:ptys0
[   15.174244] device: 'ptys1': device_add
[   15.178116] PM: Adding info for No Bus:ptys1
[   15.182496] device: 'ptys2': device_add
[   15.186369] PM: Adding info for No Bus:ptys2
[   15.190749] device: 'ptys3': device_add
[   15.194628] PM: Adding info for No Bus:ptys3
[   15.199008] device: 'ptys4': device_add
[   15.202882] PM: Adding info for No Bus:ptys4
[   15.207261] device: 'ptys5': device_add
[   15.211135] PM: Adding info for No Bus:ptys5
[   15.215514] device: 'ptys6': device_add
[   15.219391] PM: Adding info for No Bus:ptys6
[   15.223772] device: 'ptys7': device_add
[   15.227659] PM: Adding info for No Bus:ptys7
[   15.232040] device: 'ptys8': device_add
[   15.235914] PM: Adding info for No Bus:ptys8
[   15.240294] device: 'ptys9': device_add
[   15.244167] PM: Adding info for No Bus:ptys9
[   15.248566] device: 'ptysa': device_add
[   15.252436] PM: Adding info for No Bus:ptysa
[   15.256816] device: 'ptysb': device_add
[   15.260704] PM: Adding info for No Bus:ptysb
[   15.265085] device: 'ptysc': device_add
[   15.268959] PM: Adding info for No Bus:ptysc
[   15.273339] device: 'ptysd': device_add
[   15.277213] PM: Adding info for No Bus:ptysd
[   15.281592] device: 'ptyse': device_add
[   15.285466] PM: Adding info for No Bus:ptyse
[   15.289846] device: 'ptysf': device_add
[   15.293726] PM: Adding info for No Bus:ptysf
[   15.298105] device: 'ptyt0': device_add
[   15.301979] PM: Adding info for No Bus:ptyt0
[   15.306359] device: 'ptyt1': device_add
[   15.310232] PM: Adding info for No Bus:ptyt1
[   15.314612] device: 'ptyt2': device_add
[   15.318491] PM: Adding info for No Bus:ptyt2
[   15.322872] device: 'ptyt3': device_add
[   15.326747] PM: Adding info for No Bus:ptyt3
[   15.331126] device: 'ptyt4': device_add
[   15.335000] PM: Adding info for No Bus:ptyt4
[   15.339380] device: 'ptyt5': device_add
[   15.343254] PM: Adding info for No Bus:ptyt5
[   15.347633] device: 'ptyt6': device_add
[   15.351514] PM: Adding info for No Bus:ptyt6
[   15.355894] device: 'ptyt7': device_add
[   15.359767] PM: Adding info for No Bus:ptyt7
[   15.364147] device: 'ptyt8': device_add
[   15.368030] PM: Adding info for No Bus:ptyt8
[   15.372410] device: 'ptyt9': device_add
[   15.376285] PM: Adding info for No Bus:ptyt9
[   15.380666] device: 'ptyta': device_add
[   15.384542] PM: Adding info for No Bus:ptyta
[   15.388925] device: 'ptytb': device_add
[   15.392799] PM: Adding info for No Bus:ptytb
[   15.397179] device: 'ptytc': device_add
[   15.401053] PM: Adding info for No Bus:ptytc
[   15.405433] device: 'ptytd': device_add
[   15.409313] PM: Adding info for No Bus:ptytd
[   15.413693] device: 'ptyte': device_add
[   15.417568] PM: Adding info for No Bus:ptyte
[   15.421948] device: 'ptytf': device_add
[   15.425822] PM: Adding info for No Bus:ptytf
[   15.430202] device: 'ptyu0': device_add
[   15.434076] PM: Adding info for No Bus:ptyu0
[   15.438455] device: 'ptyu1': device_add
[   15.442336] PM: Adding info for No Bus:ptyu1
[   15.446716] device: 'ptyu2': device_add
[   15.450591] PM: Adding info for No Bus:ptyu2
[   15.454970] device: 'ptyu3': device_add
[   15.458845] PM: Adding info for No Bus:ptyu3
[   15.463224] device: 'ptyu4': device_add
[   15.467098] PM: Adding info for No Bus:ptyu4
[   15.471478] device: 'ptyu5': device_add
[   15.475367] PM: Adding info for No Bus:ptyu5
[   15.479747] device: 'ptyu6': device_add
[   15.483622] PM: Adding info for No Bus:ptyu6
[   15.488019] device: 'ptyu7': device_add
[   15.491895] PM: Adding info for No Bus:ptyu7
[   15.496275] device: 'ptyu8': device_add
[   15.500149] PM: Adding info for No Bus:ptyu8
[   15.504529] device: 'ptyu9': device_add
[   15.508410] PM: Adding info for No Bus:ptyu9
[   15.512789] device: 'ptyua': device_add
[   15.516664] PM: Adding info for No Bus:ptyua
[   15.521043] device: 'ptyub': device_add
[   15.524917] PM: Adding info for No Bus:ptyub
[   15.529298] device: 'ptyuc': device_add
[   15.533179] PM: Adding info for No Bus:ptyuc
[   15.537559] device: 'ptyud': device_add
[   15.541435] PM: Adding info for No Bus:ptyud
[   15.545814] device: 'ptyue': device_add
[   15.549689] PM: Adding info for No Bus:ptyue
[   15.554069] device: 'ptyuf': device_add
[   15.557944] PM: Adding info for No Bus:ptyuf
[   15.562323] device: 'ptyv0': device_add
[   15.566206] PM: Adding info for No Bus:ptyv0
[   15.570586] device: 'ptyv1': device_add
[   15.574461] PM: Adding info for No Bus:ptyv1
[   15.578841] device: 'ptyv2': device_add
[   15.582725] PM: Adding info for No Bus:ptyv2
[   15.587105] device: 'ptyv3': device_add
[   15.590981] PM: Adding info for No Bus:ptyv3
[   15.595360] device: 'ptyv4': device_add
[   15.599242] PM: Adding info for No Bus:ptyv4
[   15.603622] device: 'ptyv5': device_add
[   15.607506] PM: Adding info for No Bus:ptyv5
[   15.611886] device: 'ptyv6': device_add
[   15.615763] PM: Adding info for No Bus:ptyv6
[   15.620142] device: 'ptyv7': device_add
[   15.624024] PM: Adding info for No Bus:ptyv7
[   15.628404] device: 'ptyv8': device_add
[   15.632280] PM: Adding info for No Bus:ptyv8
[   15.636669] device: 'ptyv9': device_add
[   15.640540] PM: Adding info for No Bus:ptyv9
[   15.644923] device: 'ptyva': device_add
[   15.648799] PM: Adding info for No Bus:ptyva
[   15.653198] device: 'ptyvb': device_add
[   15.657081] PM: Adding info for No Bus:ptyvb
[   15.661464] device: 'ptyvc': device_add
[   15.665341] PM: Adding info for No Bus:ptyvc
[   15.669722] device: 'ptyvd': device_add
[   15.673598] PM: Adding info for No Bus:ptyvd
[   15.677979] device: 'ptyve': device_add
[   15.681864] PM: Adding info for No Bus:ptyve
[   15.686247] device: 'ptyvf': device_add
[   15.690129] PM: Adding info for No Bus:ptyvf
[   15.694512] device: 'ptyw0': device_add
[   15.698387] PM: Adding info for No Bus:ptyw0
[   15.702769] device: 'ptyw1': device_add
[   15.706645] PM: Adding info for No Bus:ptyw1
[   15.711027] device: 'ptyw2': device_add
[   15.714902] PM: Adding info for No Bus:ptyw2
[   15.719284] device: 'ptyw3': device_add
[   15.723170] PM: Adding info for No Bus:ptyw3
[   15.727569] device: 'ptyw4': device_add
[   15.731446] PM: Adding info for No Bus:ptyw4
[   15.735828] device: 'ptyw5': device_add
[   15.739704] PM: Adding info for No Bus:ptyw5
[   15.744087] device: 'ptyw6': device_add
[   15.747969] PM: Adding info for No Bus:ptyw6
[   15.752352] device: 'ptyw7': device_add
[   15.758784] PM: Adding info for No Bus:ptyw7
[   15.763165] device: 'ptyw8': device_add
[   15.767042] PM: Adding info for No Bus:ptyw8
[   15.771424] device: 'ptyw9': device_add
[   15.775300] PM: Adding info for No Bus:ptyw9
[   15.779680] device: 'ptywa': device_add
[   15.783564] PM: Adding info for No Bus:ptywa
[   15.787946] device: 'ptywb': device_add
[   15.791832] PM: Adding info for No Bus:ptywb
[   15.796213] device: 'ptywc': device_add
[   15.800089] PM: Adding info for No Bus:ptywc
[   15.804471] device: 'ptywd': device_add
[   15.808348] PM: Adding info for No Bus:ptywd
[   15.812728] device: 'ptywe': device_add
[   15.816612] PM: Adding info for No Bus:ptywe
[   15.820996] device: 'ptywf': device_add
[   15.824872] PM: Adding info for No Bus:ptywf
[   15.829253] device: 'ptyx0': device_add
[   15.833144] PM: Adding info for No Bus:ptyx0
[   15.837527] device: 'ptyx1': device_add
[   15.841417] PM: Adding info for No Bus:ptyx1
[   15.845798] device: 'ptyx2': device_add
[   15.849678] PM: Adding info for No Bus:ptyx2
[   15.854059] device: 'ptyx3': device_add
[   15.857936] PM: Adding info for No Bus:ptyx3
[   15.862317] device: 'ptyx4': device_add
[   15.866193] PM: Adding info for No Bus:ptyx4
[   15.870574] device: 'ptyx5': device_add
[   15.874457] PM: Adding info for No Bus:ptyx5
[   15.878838] device: 'ptyx6': device_add
[   15.882715] PM: Adding info for No Bus:ptyx6
[   15.887096] device: 'ptyx7': device_add
[   15.890973] PM: Adding info for No Bus:ptyx7
[   15.895354] device: 'ptyx8': device_add
[   15.899240] PM: Adding info for No Bus:ptyx8
[   15.903621] device: 'ptyx9': device_add
[   15.907505] PM: Adding info for No Bus:ptyx9
[   15.911887] device: 'ptyxa': device_add
[   15.915764] PM: Adding info for No Bus:ptyxa
[   15.920145] device: 'ptyxb': device_add
[   15.924021] PM: Adding info for No Bus:ptyxb
[   15.928402] device: 'ptyxc': device_add
[   15.932279] PM: Adding info for No Bus:ptyxc
[   15.936667] device: 'ptyxd': device_add
[   15.940546] PM: Adding info for No Bus:ptyxd
[   15.944929] device: 'ptyxe': device_add
[   15.948806] PM: Adding info for No Bus:ptyxe
[   15.953203] device: 'ptyxf': device_add
[   15.957081] PM: Adding info for No Bus:ptyxf
[   15.961464] device: 'ptyy0': device_add
[   15.965347] PM: Adding info for No Bus:ptyy0
[   15.969746] device: 'ptyy1': device_add
[   15.973624] PM: Adding info for No Bus:ptyy1
[   15.978005] device: 'ptyy2': device_add
[   15.981882] PM: Adding info for No Bus:ptyy2
[   15.986263] device: 'ptyy3': device_add
[   15.990152] PM: Adding info for No Bus:ptyy3
[   15.994534] device: 'ptyy4': device_add
[   15.998421] PM: Adding info for No Bus:ptyy4
[   16.002803] device: 'ptyy5': device_add
[   16.006690] PM: Adding info for No Bus:ptyy5
[   16.011071] device: 'ptyy6': device_add
[   16.014948] PM: Adding info for No Bus:ptyy6
[   16.019330] device: 'ptyy7': device_add
[   16.023207] PM: Adding info for No Bus:ptyy7
[   16.027589] device: 'ptyy8': device_add
[   16.031473] PM: Adding info for No Bus:ptyy8
[   16.035855] device: 'ptyy9': device_add
[   16.039732] PM: Adding info for No Bus:ptyy9
[   16.044113] device: 'ptyya': device_add
[   16.047990] PM: Adding info for No Bus:ptyya
[   16.052371] device: 'ptyyb': device_add
[   16.056254] PM: Adding info for No Bus:ptyyb
[   16.060655] device: 'ptyyc': device_add
[   16.064528] PM: Adding info for No Bus:ptyyc
[   16.068910] device: 'ptyyd': device_add
[   16.072788] PM: Adding info for No Bus:ptyyd
[   16.077169] device: 'ptyye': device_add
[   16.081047] PM: Adding info for No Bus:ptyye
[   16.085427] device: 'ptyyf': device_add
[   16.089311] PM: Adding info for No Bus:ptyyf
[   16.093693] device: 'ptyz0': device_add
[   16.097571] PM: Adding info for No Bus:ptyz0
[   16.101952] device: 'ptyz1': device_add
[   16.105838] PM: Adding info for No Bus:ptyz1
[   16.110220] device: 'ptyz2': device_add
[   16.114099] PM: Adding info for No Bus:ptyz2
[   16.118479] device: 'ptyz3': device_add
[   16.122364] PM: Adding info for No Bus:ptyz3
[   16.126745] device: 'ptyz4': device_add
[   16.130623] PM: Adding info for No Bus:ptyz4
[   16.135003] device: 'ptyz5': device_add
[   16.138882] PM: Adding info for No Bus:ptyz5
[   16.143262] device: 'ptyz6': device_add
[   16.147140] PM: Adding info for No Bus:ptyz6
[   16.151521] device: 'ptyz7': device_add
[   16.155406] PM: Adding info for No Bus:ptyz7
[   16.159787] device: 'ptyz8': device_add
[   16.163665] PM: Adding info for No Bus:ptyz8
[   16.168045] device: 'ptyz9': device_add
[   16.171923] PM: Adding info for No Bus:ptyz9
[   16.176304] device: 'ptyza': device_add
[   16.180188] PM: Adding info for No Bus:ptyza
[   16.184569] device: 'ptyzb': device_add
[   16.188448] PM: Adding info for No Bus:ptyzb
[   16.192829] device: 'ptyzc': device_add
[   16.196707] PM: Adding info for No Bus:ptyzc
[   16.201087] device: 'ptyzd': device_add
[   16.204966] PM: Adding info for No Bus:ptyzd
[   16.209363] device: 'ptyze': device_add
[   16.213257] PM: Adding info for No Bus:ptyze
[   16.217638] device: 'ptyzf': device_add
[   16.221521] PM: Adding info for No Bus:ptyzf
[   16.225903] device: 'ptya0': device_add
[   16.229782] PM: Adding info for No Bus:ptya0
[   16.234162] device: 'ptya1': device_add
[   16.238041] PM: Adding info for No Bus:ptya1
[   16.242422] device: 'ptya2': device_add
[   16.246307] PM: Adding info for No Bus:ptya2
[   16.250689] device: 'ptya3': device_add
[   16.254571] PM: Adding info for No Bus:ptya3
[   16.258952] device: 'ptya4': device_add
[   16.262831] PM: Adding info for No Bus:ptya4
[   16.267212] device: 'ptya5': device_add
[   16.271096] PM: Adding info for No Bus:ptya5
[   16.275477] device: 'ptya6': device_add
[   16.279357] PM: Adding info for No Bus:ptya6
[   16.283737] device: 'ptya7': device_add
[   16.287616] PM: Adding info for No Bus:ptya7
[   16.291997] device: 'ptya8': device_add
[   16.295876] PM: Adding info for No Bus:ptya8
[   16.300257] device: 'ptya9': device_add
[   16.304142] PM: Adding info for No Bus:ptya9
[   16.308523] device: 'ptyaa': device_add
[   16.312403] PM: Adding info for No Bus:ptyaa
[   16.316784] device: 'ptyab': device_add
[   16.320673] PM: Adding info for No Bus:ptyab
[   16.325052] device: 'ptyac': device_add
[   16.328932] PM: Adding info for No Bus:ptyac
[   16.333312] device: 'ptyad': device_add
[   16.337198] PM: Adding info for No Bus:ptyad
[   16.341580] device: 'ptyae': device_add
[   16.345459] PM: Adding info for No Bus:ptyae
[   16.349839] device: 'ptyaf': device_add
[   16.353719] PM: Adding info for No Bus:ptyaf
[   16.358099] device: 'ptyb0': device_add
[   16.361979] PM: Adding info for No Bus:ptyb0
[   16.366360] device: 'ptyb1': device_add
[   16.370254] PM: Adding info for No Bus:ptyb1
[   16.374635] device: 'ptyb2': device_add
[   16.378515] PM: Adding info for No Bus:ptyb2
[   16.382895] device: 'ptyb3': device_add
[   16.386775] PM: Adding info for No Bus:ptyb3
[   16.391155] device: 'ptyb4': device_add
[   16.395042] PM: Adding info for No Bus:ptyb4
[   16.399422] device: 'ptyb5': device_add
[   16.403303] PM: Adding info for No Bus:ptyb5
[   16.407684] device: 'ptyb6': device_add
[   16.411563] PM: Adding info for No Bus:ptyb6
[   16.415944] device: 'ptyb7': device_add
[   16.419824] PM: Adding info for No Bus:ptyb7
[   16.424204] device: 'ptyb8': device_add
[   16.428102] PM: Adding info for No Bus:ptyb8
[   16.432483] device: 'ptyb9': device_add
[   16.436363] PM: Adding info for No Bus:ptyb9
[   16.440744] device: 'ptyba': device_add
[   16.444618] PM: Adding info for No Bus:ptyba
[   16.449020] device: 'ptybb': device_add
[   16.452901] PM: Adding info for No Bus:ptybb
[   16.457283] device: 'ptybc': device_add
[   16.461169] PM: Adding info for No Bus:ptybc
[   16.465552] device: 'ptybd': device_add
[   16.469432] PM: Adding info for No Bus:ptybd
[   16.473813] device: 'ptybe': device_add
[   16.477692] PM: Adding info for No Bus:ptybe
[   16.482073] device: 'ptybf': device_add
[   16.485959] PM: Adding info for No Bus:ptybf
[   16.490339] device: 'ptyc0': device_add
[   16.494220] PM: Adding info for No Bus:ptyc0
[   16.498601] device: 'ptyc1': device_add
[   16.505036] PM: Adding info for No Bus:ptyc1
[   16.509418] device: 'ptyc2': device_add
[   16.513298] PM: Adding info for No Bus:ptyc2
[   16.517679] device: 'ptyc3': device_add
[   16.521566] PM: Adding info for No Bus:ptyc3
[   16.525947] device: 'ptyc4': device_add
[   16.529837] PM: Adding info for No Bus:ptyc4
[   16.534218] device: 'ptyc5': device_add
[   16.538098] PM: Adding info for No Bus:ptyc5
[   16.542479] device: 'ptyc6': device_add
[   16.546359] PM: Adding info for No Bus:ptyc6
[   16.550739] device: 'ptyc7': device_add
[   16.554627] PM: Adding info for No Bus:ptyc7
[   16.559008] device: 'ptyc8': device_add
[   16.562888] PM: Adding info for No Bus:ptyc8
[   16.567269] device: 'ptyc9': device_add
[   16.571149] PM: Adding info for No Bus:ptyc9
[   16.575530] device: 'ptyca': device_add
[   16.579410] PM: Adding info for No Bus:ptyca
[   16.583790] device: 'ptycb': device_add
[   16.587678] PM: Adding info for No Bus:ptycb
[   16.592059] device: 'ptycc': device_add
[   16.595939] PM: Adding info for No Bus:ptycc
[   16.600320] device: 'ptycd': device_add
[   16.604200] PM: Adding info for No Bus:ptycd
[   16.608581] device: 'ptyce': device_add
[   16.612467] PM: Adding info for No Bus:ptyce
[   16.616849] device: 'ptycf': device_add
[   16.620730] PM: Adding info for No Bus:ptycf
[   16.625109] device: 'ptyd0': device_add
[   16.628989] PM: Adding info for No Bus:ptyd0
[   16.633370] device: 'ptyd1': device_add
[   16.637260] PM: Adding info for No Bus:ptyd1
[   16.641641] device: 'ptyd2': device_add
[   16.645529] PM: Adding info for No Bus:ptyd2
[   16.649910] device: 'ptyd3': device_add
[   16.653790] PM: Adding info for No Bus:ptyd3
[   16.658171] device: 'ptyd4': device_add
[   16.662052] PM: Adding info for No Bus:ptyd4
[   16.666433] device: 'ptyd5': device_add
[   16.670314] PM: Adding info for No Bus:ptyd5
[   16.674694] device: 'ptyd6': device_add
[   16.678582] PM: Adding info for No Bus:ptyd6
[   16.682962] device: 'ptyd7': device_add
[   16.686843] PM: Adding info for No Bus:ptyd7
[   16.691241] device: 'ptyd8': device_add
[   16.695123] PM: Adding info for No Bus:ptyd8
[   16.699504] device: 'ptyd9': device_add
[   16.703391] PM: Adding info for No Bus:ptyd9
[   16.707772] device: 'ptyda': device_add
[   16.711654] PM: Adding info for No Bus:ptyda
[   16.716034] device: 'ptydb': device_add
[   16.719915] PM: Adding info for No Bus:ptydb
[   16.724296] device: 'ptydc': device_add
[   16.728177] PM: Adding info for No Bus:ptydc
[   16.732558] device: 'ptydd': device_add
[   16.736445] PM: Adding info for No Bus:ptydd
[   16.740826] device: 'ptyde': device_add
[   16.744717] PM: Adding info for No Bus:ptyde
[   16.749096] device: 'ptydf': device_add
[   16.752986] PM: Adding info for No Bus:ptydf
[   16.757367] device: 'ptye0': device_add
[   16.761248] PM: Adding info for No Bus:ptye0
[   16.765630] device: 'ptye1': device_add
[   16.769518] PM: Adding info for No Bus:ptye1
[   16.773900] device: 'ptye2': device_add
[   16.777781] PM: Adding info for No Bus:ptye2
[   16.782161] device: 'ptye3': device_add
[   16.786042] PM: Adding info for No Bus:ptye3
[   16.790423] device: 'ptye4': device_add
[   16.794304] PM: Adding info for No Bus:ptye4
[   16.798686] device: 'ptye5': device_add
[   16.802574] PM: Adding info for No Bus:ptye5
[   16.806954] device: 'ptye6': device_add
[   16.810836] PM: Adding info for No Bus:ptye6
[   16.815216] device: 'ptye7': device_add
[   16.819097] PM: Adding info for No Bus:ptye7
[   16.823479] device: 'ptye8': device_add
[   16.827367] PM: Adding info for No Bus:ptye8
[   16.831748] device: 'ptye9': device_add
[   16.835630] PM: Adding info for No Bus:ptye9
[   16.840010] device: 'ptyea': device_add
[   16.843891] PM: Adding info for No Bus:ptyea
[   16.848272] device: 'ptyeb': device_add
[   16.852163] PM: Adding info for No Bus:ptyeb
[   16.856544] device: 'ptyec': device_add
[   16.860432] PM: Adding info for No Bus:ptyec
[   16.864813] device: 'ptyed': device_add
[   16.868694] PM: Adding info for No Bus:ptyed
[   16.873076] device: 'ptyee': device_add
[   16.876957] PM: Adding info for No Bus:ptyee
[   16.881338] device: 'ptyef': device_add
[   16.885219] PM: Adding info for No Bus:ptyef
[   16.889608] device: 'ttyp0': device_add
[   16.893495] PM: Adding info for No Bus:ttyp0
[   16.897876] device: 'ttyp1': device_add
[   16.901756] PM: Adding info for No Bus:ttyp1
[   16.906136] device: 'ttyp2': device_add
[   16.910015] PM: Adding info for No Bus:ttyp2
[   16.914396] device: 'ttyp3': device_add
[   16.918281] PM: Adding info for No Bus:ttyp3
[   16.922662] device: 'ttyp4': device_add
[   16.926542] PM: Adding info for No Bus:ttyp4
[   16.930940] device: 'ttyp5': device_add
[   16.934820] PM: Adding info for No Bus:ttyp5
[   16.939201] device: 'ttyp6': device_add
[   16.943080] PM: Adding info for No Bus:ttyp6
[   16.947461] device: 'ttyp7': device_add
[   16.951355] PM: Adding info for No Bus:ttyp7
[   16.955735] device: 'ttyp8': device_add
[   16.959615] PM: Adding info for No Bus:ttyp8
[   16.963996] device: 'ttyp9': device_add
[   16.967888] PM: Adding info for No Bus:ttyp9
[   16.972275] device: 'ttypa': device_add
[   16.976162] PM: Adding info for No Bus:ttypa
[   16.980544] device: 'ttypb': device_add
[   16.984433] PM: Adding info for No Bus:ttypb
[   16.988815] device: 'ttypc': device_add
[   16.992695] PM: Adding info for No Bus:ttypc
[   16.997077] device: 'ttypd': device_add
[   17.000956] PM: Adding info for No Bus:ttypd
[   17.005337] device: 'ttype': device_add
[   17.009217] PM: Adding info for No Bus:ttype
[   17.013601] device: 'ttypf': device_add
[   17.017488] PM: Adding info for No Bus:ttypf
[   17.021870] device: 'ttyq0': device_add
[   17.025750] PM: Adding info for No Bus:ttyq0
[   17.030133] device: 'ttyq1': device_add
[   17.034012] PM: Adding info for No Bus:ttyq1
[   17.038393] device: 'ttyq2': device_add
[   17.042279] PM: Adding info for No Bus:ttyq2
[   17.046660] device: 'ttyq3': device_add
[   17.050541] PM: Adding info for No Bus:ttyq3
[   17.054923] device: 'ttyq4': device_add
[   17.058811] PM: Adding info for No Bus:ttyq4
[   17.063193] device: 'ttyq5': device_add
[   17.067073] PM: Adding info for No Bus:ttyq5
[   17.071454] device: 'ttyq6': device_add
[   17.075340] PM: Adding info for No Bus:ttyq6
[   17.079722] device: 'ttyq7': device_add
[   17.083602] PM: Adding info for No Bus:ttyq7
[   17.087983] device: 'ttyq8': device_add
[   17.091862] PM: Adding info for No Bus:ttyq8
[   17.096243] device: 'ttyq9': device_add
[   17.100123] PM: Adding info for No Bus:ttyq9
[   17.104505] device: 'ttyqa': device_add
[   17.108394] PM: Adding info for No Bus:ttyqa
[   17.112775] device: 'ttyqb': device_add
[   17.116650] PM: Adding info for No Bus:ttyqb
[   17.121035] device: 'ttyqc': device_add
[   17.124914] PM: Adding info for No Bus:ttyqc
[   17.129297] device: 'ttyqd': device_add
[   17.133191] PM: Adding info for No Bus:ttyqd
[   17.137573] device: 'ttyqe': device_add
[   17.141453] PM: Adding info for No Bus:ttyqe
[   17.145834] device: 'ttyqf': device_add
[   17.149715] PM: Adding info for No Bus:ttyqf
[   17.154096] device: 'ttyr0': device_add
[   17.157976] PM: Adding info for No Bus:ttyr0
[   17.162357] device: 'ttyr1': device_add
[   17.166252] PM: Adding info for No Bus:ttyr1
[   17.170651] device: 'ttyr2': device_add
[   17.174532] PM: Adding info for No Bus:ttyr2
[   17.178914] device: 'ttyr3': device_add
[   17.182794] PM: Adding info for No Bus:ttyr3
[   17.187175] device: 'ttyr4': device_add
[   17.191056] PM: Adding info for No Bus:ttyr4
[   17.195438] device: 'ttyr5': device_add
[   17.199325] PM: Adding info for No Bus:ttyr5
[   17.203707] device: 'ttyr6': device_add
[   17.207587] PM: Adding info for No Bus:ttyr6
[   17.211968] device: 'ttyr7': device_add
[   17.215849] PM: Adding info for No Bus:ttyr7
[   17.220230] device: 'ttyr8': device_add
[   17.224115] PM: Adding info for No Bus:ttyr8
[   17.228497] device: 'ttyr9': device_add
[   17.232384] PM: Adding info for No Bus:ttyr9
[   17.236768] device: 'ttyra': device_add
[   17.240644] PM: Adding info for No Bus:ttyra
[   17.245029] device: 'ttyrb': device_add
[   17.251462] PM: Adding info for No Bus:ttyrb
[   17.255844] device: 'ttyrc': device_add
[   17.259731] PM: Adding info for No Bus:ttyrc
[   17.264114] device: 'ttyrd': device_add
[   17.267995] PM: Adding info for No Bus:ttyrd
[   17.272376] device: 'ttyre': device_add
[   17.276268] PM: Adding info for No Bus:ttyre
[   17.280651] device: 'ttyrf': device_add
[   17.284531] PM: Adding info for No Bus:ttyrf
[   17.288913] device: 'ttys0': device_add
[   17.292800] PM: Adding info for No Bus:ttys0
[   17.297180] device: 'ttys1': device_add
[   17.301061] PM: Adding info for No Bus:ttys1
[   17.305442] device: 'ttys2': device_add
[   17.309322] PM: Adding info for No Bus:ttys2
[   17.313703] device: 'ttys3': device_add
[   17.317585] PM: Adding info for No Bus:ttys3
[   17.321966] device: 'ttys4': device_add
[   17.325854] PM: Adding info for No Bus:ttys4
[   17.330235] device: 'ttys5': device_add
[   17.334116] PM: Adding info for No Bus:ttys5
[   17.338497] device: 'ttys6': device_add
[   17.342378] PM: Adding info for No Bus:ttys6
[   17.346759] device: 'ttys7': device_add
[   17.350646] PM: Adding info for No Bus:ttys7
[   17.355028] device: 'ttys8': device_add
[   17.358909] PM: Adding info for No Bus:ttys8
[   17.363290] device: 'ttys9': device_add
[   17.367171] PM: Adding info for No Bus:ttys9
[   17.371553] device: 'ttysa': device_add
[   17.375442] PM: Adding info for No Bus:ttysa
[   17.379824] device: 'ttysb': device_add
[   17.383712] PM: Adding info for No Bus:ttysb
[   17.388093] device: 'ttysc': device_add
[   17.391975] PM: Adding info for No Bus:ttysc
[   17.396356] device: 'ttysd': device_add
[   17.400237] PM: Adding info for No Bus:ttysd
[   17.404618] device: 'ttyse': device_add
[   17.408499] PM: Adding info for No Bus:ttyse
[   17.412898] device: 'ttysf': device_add
[   17.416786] PM: Adding info for No Bus:ttysf
[   17.421165] device: 'ttyt0': device_add
[   17.425046] PM: Adding info for No Bus:ttyt0
[   17.429427] device: 'ttyt1': device_add
[   17.433308] PM: Adding info for No Bus:ttyt1
[   17.437689] device: 'ttyt2': device_add
[   17.441570] PM: Adding info for No Bus:ttyt2
[   17.445951] device: 'ttyt3': device_add
[   17.449840] PM: Adding info for No Bus:ttyt3
[   17.454221] device: 'ttyt4': device_add
[   17.458103] PM: Adding info for No Bus:ttyt4
[   17.462484] device: 'ttyt5': device_add
[   17.466366] PM: Adding info for No Bus:ttyt5
[   17.470747] device: 'ttyt6': device_add
[   17.474634] PM: Adding info for No Bus:ttyt6
[   17.479016] device: 'ttyt7': device_add
[   17.482907] PM: Adding info for No Bus:ttyt7
[   17.487289] device: 'ttyt8': device_add
[   17.491170] PM: Adding info for No Bus:ttyt8
[   17.495551] device: 'ttyt9': device_add
[   17.499433] PM: Adding info for No Bus:ttyt9
[   17.503814] device: 'ttyta': device_add
[   17.507703] PM: Adding info for No Bus:ttyta
[   17.512085] device: 'ttytb': device_add
[   17.515975] PM: Adding info for No Bus:ttytb
[   17.520357] device: 'ttytc': device_add
[   17.524239] PM: Adding info for No Bus:ttytc
[   17.528620] device: 'ttytd': device_add
[   17.532505] PM: Adding info for No Bus:ttytd
[   17.536887] device: 'ttyte': device_add
[   17.540775] PM: Adding info for No Bus:ttyte
[   17.545156] device: 'ttytf': device_add
[   17.549038] PM: Adding info for No Bus:ttytf
[   17.553418] device: 'ttyu0': device_add
[   17.557300] PM: Adding info for No Bus:ttyu0
[   17.561681] device: 'ttyu1': device_add
[   17.565569] PM: Adding info for No Bus:ttyu1
[   17.569951] device: 'ttyu2': device_add
[   17.573833] PM: Adding info for No Bus:ttyu2
[   17.578215] device: 'ttyu3': device_add
[   17.582097] PM: Adding info for No Bus:ttyu3
[   17.586478] device: 'ttyu4': device_add
[   17.590369] PM: Adding info for No Bus:ttyu4
[   17.594750] device: 'ttyu5': device_add
[   17.598639] PM: Adding info for No Bus:ttyu5
[   17.603020] device: 'ttyu6': device_add
[   17.606902] PM: Adding info for No Bus:ttyu6
[   17.611284] device: 'ttyu7': device_add
[   17.615166] PM: Adding info for No Bus:ttyu7
[   17.619547] device: 'ttyu8': device_add
[   17.623429] PM: Adding info for No Bus:ttyu8
[   17.627810] device: 'ttyu9': device_add
[   17.631698] PM: Adding info for No Bus:ttyu9
[   17.636080] device: 'ttyua': device_add
[   17.639962] PM: Adding info for No Bus:ttyua
[   17.644343] device: 'ttyub': device_add
[   17.648225] PM: Adding info for No Bus:ttyub
[   17.652624] device: 'ttyuc': device_add
[   17.656507] PM: Adding info for No Bus:ttyuc
[   17.660889] device: 'ttyud': device_add
[   17.664778] PM: Adding info for No Bus:ttyud
[   17.669158] device: 'ttyue': device_add
[   17.673041] PM: Adding info for No Bus:ttyue
[   17.677422] device: 'ttyuf': device_add
[   17.681304] PM: Adding info for No Bus:ttyuf
[   17.685685] device: 'ttyv0': device_add
[   17.689574] PM: Adding info for No Bus:ttyv0
[   17.693955] device: 'ttyv1': device_add
[   17.697847] PM: Adding info for No Bus:ttyv1
[   17.702229] device: 'ttyv2': device_add
[   17.706111] PM: Adding info for No Bus:ttyv2
[   17.710492] device: 'ttyv3': device_add
[   17.714375] PM: Adding info for No Bus:ttyv3
[   17.718756] device: 'ttyv4': device_add
[   17.722645] PM: Adding info for No Bus:ttyv4
[   17.727027] device: 'ttyv5': device_add
[   17.730910] PM: Adding info for No Bus:ttyv5
[   17.735291] device: 'ttyv6': device_add
[   17.739174] PM: Adding info for No Bus:ttyv6
[   17.743555] device: 'ttyv7': device_add
[   17.747438] PM: Adding info for No Bus:ttyv7
[   17.751819] device: 'ttyv8': device_add
[   17.755708] PM: Adding info for No Bus:ttyv8
[   17.760090] device: 'ttyv9': device_add
[   17.763973] PM: Adding info for No Bus:ttyv9
[   17.768354] device: 'ttyva': device_add
[   17.772236] PM: Adding info for No Bus:ttyva
[   17.776617] device: 'ttyvb': device_add
[   17.780507] PM: Adding info for No Bus:ttyvb
[   17.784888] device: 'ttyvc': device_add
[   17.788775] PM: Adding info for No Bus:ttyvc
[   17.793155] device: 'ttyvd': device_add
[   17.797050] PM: Adding info for No Bus:ttyvd
[   17.801432] device: 'ttyve': device_add
[   17.805315] PM: Adding info for No Bus:ttyve
[   17.809697] device: 'ttyvf': device_add
[   17.813586] PM: Adding info for No Bus:ttyvf
[   17.817967] device: 'ttyw0': device_add
[   17.821851] PM: Adding info for No Bus:ttyw0
[   17.826233] device: 'ttyw1': device_add
[   17.830116] PM: Adding info for No Bus:ttyw1
[   17.834497] device: 'ttyw2': device_add
[   17.838381] PM: Adding info for No Bus:ttyw2
[   17.842763] device: 'ttyw3': device_add
[   17.846653] PM: Adding info for No Bus:ttyw3
[   17.851034] device: 'ttyw4': device_add
[   17.854917] PM: Adding info for No Bus:ttyw4
[   17.859298] device: 'ttyw5': device_add
[   17.863182] PM: Adding info for No Bus:ttyw5
[   17.867564] device: 'ttyw6': device_add
[   17.871447] PM: Adding info for No Bus:ttyw6
[   17.875828] device: 'ttyw7': device_add
[   17.879719] PM: Adding info for No Bus:ttyw7
[   17.884100] device: 'ttyw8': device_add
[   17.887983] PM: Adding info for No Bus:ttyw8
[   17.892382] device: 'ttyw9': device_add
[   17.896274] PM: Adding info for No Bus:ttyw9
[   17.900656] device: 'ttywa': device_add
[   17.904555] PM: Adding info for No Bus:ttywa
[   17.908937] device: 'ttywb': device_add
[   17.912822] PM: Adding info for No Bus:ttywb
[   17.917202] device: 'ttywc': device_add
[   17.921085] PM: Adding info for No Bus:ttywc
[   17.925467] device: 'ttywd': device_add
[   17.929351] PM: Adding info for No Bus:ttywd
[   17.933732] device: 'ttywe': device_add
[   17.937622] PM: Adding info for No Bus:ttywe
[   17.942004] device: 'ttywf': device_add
[   17.945888] PM: Adding info for No Bus:ttywf
[   17.950269] device: 'ttyx0': device_add
[   17.954153] PM: Adding info for No Bus:ttyx0
[   17.958534] device: 'ttyx1': device_add
[   17.962418] PM: Adding info for No Bus:ttyx1
[   17.966800] device: 'ttyx2': device_add
[   17.970690] PM: Adding info for No Bus:ttyx2
[   17.975072] device: 'ttyx3': device_add
[   17.978956] PM: Adding info for No Bus:ttyx3
[   17.983337] device: 'ttyx4': device_add
[   17.987221] PM: Adding info for No Bus:ttyx4
[   17.991603] device: 'ttyx5': device_add
[   17.998048] PM: Adding info for No Bus:ttyx5
[   18.002430] device: 'ttyx6': device_add
[   18.006314] PM: Adding info for No Bus:ttyx6
[   18.010695] device: 'ttyx7': device_add
[   18.014589] PM: Adding info for No Bus:ttyx7
[   18.018971] device: 'ttyx8': device_add
[   18.022854] PM: Adding info for No Bus:ttyx8
[   18.027236] device: 'ttyx9': device_add
[   18.031126] PM: Adding info for No Bus:ttyx9
[   18.035507] device: 'ttyxa': device_add
[   18.039395] PM: Adding info for No Bus:ttyxa
[   18.043777] device: 'ttyxb': device_add
[   18.047664] PM: Adding info for No Bus:ttyxb
[   18.052045] device: 'ttyxc': device_add
[   18.055930] PM: Adding info for No Bus:ttyxc
[   18.060311] device: 'ttyxd': device_add
[   18.064202] PM: Adding info for No Bus:ttyxd
[   18.068584] device: 'ttyxe': device_add
[   18.072468] PM: Adding info for No Bus:ttyxe
[   18.076850] device: 'ttyxf': device_add
[   18.080729] PM: Adding info for No Bus:ttyxf
[   18.085114] device: 'ttyy0': device_add
[   18.088998] PM: Adding info for No Bus:ttyy0
[   18.093380] device: 'ttyy1': device_add
[   18.097272] PM: Adding info for No Bus:ttyy1
[   18.101653] device: 'ttyy2': device_add
[   18.105550] PM: Adding info for No Bus:ttyy2
[   18.109931] device: 'ttyy3': device_add
[   18.113822] PM: Adding info for No Bus:ttyy3
[   18.118204] device: 'ttyy4': device_add
[   18.122109] PM: Adding info for No Bus:ttyy4
[   18.126490] device: 'ttyy5': device_add
[   18.130375] PM: Adding info for No Bus:ttyy5
[   18.134774] device: 'ttyy6': device_add
[   18.138660] PM: Adding info for No Bus:ttyy6
[   18.143042] device: 'ttyy7': device_add
[   18.146927] PM: Adding info for No Bus:ttyy7
[   18.151308] device: 'ttyy8': device_add
[   18.155199] PM: Adding info for No Bus:ttyy8
[   18.159581] device: 'ttyy9': device_add
[   18.163466] PM: Adding info for No Bus:ttyy9
[   18.167848] device: 'ttyya': device_add
[   18.171733] PM: Adding info for No Bus:ttyya
[   18.176114] device: 'ttyyb': device_add
[   18.179998] PM: Adding info for No Bus:ttyyb
[   18.184379] device: 'ttyyc': device_add
[   18.188270] PM: Adding info for No Bus:ttyyc
[   18.192652] device: 'ttyyd': device_add
[   18.196537] PM: Adding info for No Bus:ttyyd
[   18.200919] device: 'ttyye': device_add
[   18.204803] PM: Adding info for No Bus:ttyye
[   18.209183] device: 'ttyyf': device_add
[   18.213074] PM: Adding info for No Bus:ttyyf
[   18.217456] device: 'ttyz0': device_add
[   18.221350] PM: Adding info for No Bus:ttyz0
[   18.225731] device: 'ttyz1': device_add
[   18.229622] PM: Adding info for No Bus:ttyz1
[   18.234004] device: 'ttyz2': device_add
[   18.237889] PM: Adding info for No Bus:ttyz2
[   18.242270] device: 'ttyz3': device_add
[   18.246159] PM: Adding info for No Bus:ttyz3
[   18.250541] device: 'ttyz4': device_add
[   18.254426] PM: Adding info for No Bus:ttyz4
[   18.258808] device: 'ttyz5': device_add
[   18.262693] PM: Adding info for No Bus:ttyz5
[   18.267074] device: 'ttyz6': device_add
[   18.270959] PM: Adding info for No Bus:ttyz6
[   18.275341] device: 'ttyz7': device_add
[   18.279241] PM: Adding info for No Bus:ttyz7
[   18.283622] device: 'ttyz8': device_add
[   18.287508] PM: Adding info for No Bus:ttyz8
[   18.291889] device: 'ttyz9': device_add
[   18.295774] PM: Adding info for No Bus:ttyz9
[   18.300156] device: 'ttyza': device_add
[   18.304041] PM: Adding info for No Bus:ttyza
[   18.308423] device: 'ttyzb': device_add
[   18.312314] PM: Adding info for No Bus:ttyzb
[   18.316696] device: 'ttyzc': device_add
[   18.320581] PM: Adding info for No Bus:ttyzc
[   18.324962] device: 'ttyzd': device_add
[   18.328857] PM: Adding info for No Bus:ttyzd
[   18.333237] device: 'ttyze': device_add
[   18.337129] PM: Adding info for No Bus:ttyze
[   18.341510] device: 'ttyzf': device_add
[   18.345396] PM: Adding info for No Bus:ttyzf
[   18.349777] device: 'ttya0': device_add
[   18.353662] PM: Adding info for No Bus:ttya0
[   18.358043] device: 'ttya1': device_add
[   18.361929] PM: Adding info for No Bus:ttya1
[   18.366310] device: 'ttya2': device_add
[   18.370202] PM: Adding info for No Bus:ttya2
[   18.374602] device: 'ttya3': device_add
[   18.378488] PM: Adding info for No Bus:ttya3
[   18.382870] device: 'ttya4': device_add
[   18.386756] PM: Adding info for No Bus:ttya4
[   18.391136] device: 'ttya5': device_add
[   18.395023] PM: Adding info for No Bus:ttya5
[   18.399404] device: 'ttya6': device_add
[   18.403296] PM: Adding info for No Bus:ttya6
[   18.407678] device: 'ttya7': device_add
[   18.411564] PM: Adding info for No Bus:ttya7
[   18.415945] device: 'ttya8': device_add
[   18.419830] PM: Adding info for No Bus:ttya8
[   18.424212] device: 'ttya9': device_add
[   18.428104] PM: Adding info for No Bus:ttya9
[   18.432485] device: 'ttyaa': device_add
[   18.436381] PM: Adding info for No Bus:ttyaa
[   18.440765] device: 'ttyab': device_add
[   18.444645] PM: Adding info for No Bus:ttyab
[   18.449028] device: 'ttyac': device_add
[   18.452914] PM: Adding info for No Bus:ttyac
[   18.457296] device: 'ttyad': device_add
[   18.461188] PM: Adding info for No Bus:ttyad
[   18.465569] device: 'ttyae': device_add
[   18.469456] PM: Adding info for No Bus:ttyae
[   18.473837] device: 'ttyaf': device_add
[   18.477723] PM: Adding info for No Bus:ttyaf
[   18.482104] device: 'ttyb0': device_add
[   18.485990] PM: Adding info for No Bus:ttyb0
[   18.490372] device: 'ttyb1': device_add
[   18.494268] PM: Adding info for No Bus:ttyb1
[   18.498650] device: 'ttyb2': device_add
[   18.502538] PM: Adding info for No Bus:ttyb2
[   18.506919] device: 'ttyb3': device_add
[   18.510806] PM: Adding info for No Bus:ttyb3
[   18.515187] device: 'ttyb4': device_add
[   18.519073] PM: Adding info for No Bus:ttyb4
[   18.523454] device: 'ttyb5': device_add
[   18.527347] PM: Adding info for No Bus:ttyb5
[   18.531729] device: 'ttyb6': device_add
[   18.535615] PM: Adding info for No Bus:ttyb6
[   18.539996] device: 'ttyb7': device_add
[   18.543891] PM: Adding info for No Bus:ttyb7
[   18.548273] device: 'ttyb8': device_add
[   18.552166] PM: Adding info for No Bus:ttyb8
[   18.556548] device: 'ttyb9': device_add
[   18.560436] PM: Adding info for No Bus:ttyb9
[   18.564821] device: 'ttyba': device_add
[   18.568702] PM: Adding info for No Bus:ttyba
[   18.573085] device: 'ttybb': device_add
[   18.576971] PM: Adding info for No Bus:ttybb
[   18.581352] device: 'ttybc': device_add
[   18.585245] PM: Adding info for No Bus:ttybc
[   18.589627] device: 'ttybd': device_add
[   18.593513] PM: Adding info for No Bus:ttybd
[   18.597894] device: 'ttybe': device_add
[   18.601781] PM: Adding info for No Bus:ttybe
[   18.606162] device: 'ttybf': device_add
[   18.610048] PM: Adding info for No Bus:ttybf
[   18.614446] device: 'ttyc0': device_add
[   18.618341] PM: Adding info for No Bus:ttyc0
[   18.622723] device: 'ttyc1': device_add
[   18.626610] PM: Adding info for No Bus:ttyc1
[   18.630990] device: 'ttyc2': device_add
[   18.634877] PM: Adding info for No Bus:ttyc2
[   18.639258] device: 'ttyc3': device_add
[   18.643159] PM: Adding info for No Bus:ttyc3
[   18.647540] device: 'ttyc4': device_add
[   18.651427] PM: Adding info for No Bus:ttyc4
[   18.655808] device: 'ttyc5': device_add
[   18.659703] PM: Adding info for No Bus:ttyc5
[   18.664085] device: 'ttyc6': device_add
[   18.667972] PM: Adding info for No Bus:ttyc6
[   18.672353] device: 'ttyc7': device_add
[   18.676246] PM: Adding info for No Bus:ttyc7
[   18.680627] device: 'ttyc8': device_add
[   18.684515] PM: Adding info for No Bus:ttyc8
[   18.688896] device: 'ttyc9': device_add
[   18.692784] PM: Adding info for No Bus:ttyc9
[   18.697165] device: 'ttyca': device_add
[   18.701052] PM: Adding info for No Bus:ttyca
[   18.705433] device: 'ttycb': device_add
[   18.709327] PM: Adding info for No Bus:ttycb
[   18.713708] device: 'ttycc': device_add
[   18.717596] PM: Adding info for No Bus:ttycc
[   18.721977] device: 'ttycd': device_add
[   18.725864] PM: Adding info for No Bus:ttycd
[   18.730245] device: 'ttyce': device_add
[   18.734133] PM: Adding info for No Bus:ttyce
[   18.738514] device: 'ttycf': device_add
[   18.744964] PM: Adding info for No Bus:ttycf
[   18.749345] device: 'ttyd0': device_add
[   18.753242] PM: Adding info for No Bus:ttyd0
[   18.757624] device: 'ttyd1': device_add
[   18.761511] PM: Adding info for No Bus:ttyd1
[   18.765892] device: 'ttyd2': device_add
[   18.769786] PM: Adding info for No Bus:ttyd2
[   18.774167] device: 'ttyd3': device_add
[   18.778055] PM: Adding info for No Bus:ttyd3
[   18.782436] device: 'ttyd4': device_add
[   18.786323] PM: Adding info for No Bus:ttyd4
[   18.790704] device: 'ttyd5': device_add
[   18.794592] PM: Adding info for No Bus:ttyd5
[   18.798972] device: 'ttyd6': device_add
[   18.802867] PM: Adding info for No Bus:ttyd6
[   18.807248] device: 'ttyd7': device_add
[   18.811135] PM: Adding info for No Bus:ttyd7
[   18.815517] device: 'ttyd8': device_add
[   18.819405] PM: Adding info for No Bus:ttyd8
[   18.823787] device: 'ttyd9': device_add
[   18.827675] PM: Adding info for No Bus:ttyd9
[   18.832056] device: 'ttyda': device_add
[   18.835951] PM: Adding info for No Bus:ttyda
[   18.840333] device: 'ttydb': device_add
[   18.844220] PM: Adding info for No Bus:ttydb
[   18.848601] device: 'ttydc': device_add
[   18.852489] PM: Adding info for No Bus:ttydc
[   18.856889] device: 'ttydd': device_add
[   18.860791] PM: Adding info for No Bus:ttydd
[   18.865172] device: 'ttyde': device_add
[   18.869061] PM: Adding info for No Bus:ttyde
[   18.873442] device: 'ttydf': device_add
[   18.877330] PM: Adding info for No Bus:ttydf
[   18.881711] device: 'ttye0': device_add
[   18.885599] PM: Adding info for No Bus:ttye0
[   18.889980] device: 'ttye1': device_add
[   18.893874] PM: Adding info for No Bus:ttye1
[   18.898256] device: 'ttye2': device_add
[   18.902144] PM: Adding info for No Bus:ttye2
[   18.906525] device: 'ttye3': device_add
[   18.910413] PM: Adding info for No Bus:ttye3
[   18.914794] device: 'ttye4': device_add
[   18.918682] PM: Adding info for No Bus:ttye4
[   18.923063] device: 'ttye5': device_add
[   18.926958] PM: Adding info for No Bus:ttye5
[   18.931340] device: 'ttye6': device_add
[   18.935228] PM: Adding info for No Bus:ttye6
[   18.939609] device: 'ttye7': device_add
[   18.943497] PM: Adding info for No Bus:ttye7
[   18.947878] device: 'ttye8': device_add
[   18.951766] PM: Adding info for No Bus:ttye8
[   18.956148] device: 'ttye9': device_add
[   18.960042] PM: Adding info for No Bus:ttye9
[   18.964423] device: 'ttyea': device_add
[   18.968321] PM: Adding info for No Bus:ttyea
[   18.972703] device: 'ttyeb': device_add
[   18.976591] PM: Adding info for No Bus:ttyeb
[   18.980972] device: 'ttyec': device_add
[   18.984867] PM: Adding info for No Bus:ttyec
[   18.989247] device: 'ttyed': device_add
[   18.993136] PM: Adding info for No Bus:ttyed
[   18.997517] device: 'ttyee': device_add
[   19.001405] PM: Adding info for No Bus:ttyee
[   19.005786] device: 'ttyef': device_add
[   19.009675] PM: Adding info for No Bus:ttyef
[   19.014083] initcall pty_init+0x0/0x462 returned 0 after 4050 msecs
[   19.020397] calling  xen_init+0x0/0x87
[   19.024166] initcall xen_init+0x0/0x87 returned -19 after 0 msecs
[   19.030308] calling  raw_init+0x0/0xdd
[   19.034079] device class 'raw': registering
[   19.038380] device: 'rawctl': device_add
[   19.042353] PM: Adding info for No Bus:rawctl
[   19.046851] initcall raw_init+0x0/0xdd returned 0 after 12 msecs
[   19.052911] calling  r3964_init+0x0/0x44
[   19.056849] r3964: Philips r3964 Driver $Revision: 1.10 $
[   19.062265] initcall r3964_init+0x0/0x44 returned 0 after 5 msecs
[   19.068403] calling  hpet_init+0x0/0x6a
[   19.072263] device: 'hpet': device_add
[   19.076054] PM: Adding info for No Bus:hpet
[   19.080354] bus: 'acpi': add driver hpet
[   19.084468] initcall hpet_init+0x0/0x6a returned 0 after 11 msecs
[   19.090612] calling  nvram_init+0x0/0x8a
[   19.094554] device: 'nvram': device_add
[   19.098432] PM: Adding info for No Bus:nvram
[   19.102820] Non-volatile memory driver v1.2
[   19.107020] initcall nvram_init+0x0/0x8a returned 0 after 11 msecs
[   19.113249] calling  mod_init+0x0/0xba
[   19.117078] initcall mod_init+0x0/0xba returned -19 after 0 msecs
[   19.123218] calling  tlclk_init+0x0/0x1b7
[   19.127266] telclk_interrup = 0xf non-mcpbl0010 hw.
[   19.132176] initcall tlclk_init+0x0/0x1b7 returned -6 after 4 msecs
[   19.138493] initcall tlclk_init+0x0/0x1b7 returned with error code -6 
[   19.145069] calling  agp_init+0x0/0x26
[   19.148834] Linux agpgart interface v0.103
[   19.152946] initcall agp_init+0x0/0x26 returned 0 after 3 msecs
[   19.158913] calling  agp_intel_init+0x0/0x29
[   19.163203] bus: 'pci': add driver agpgart-intel
[   19.167981] initcall agp_intel_init+0x0/0x29 returned 0 after 4 msecs
[   19.174470] calling  agp_sis_init+0x0/0x29
[   19.178582] bus: 'pci': add driver agpgart-sis
[   19.183186] initcall agp_sis_init+0x0/0x29 returned 0 after 4 msecs
[   19.189503] calling  agp_via_init+0x0/0x29
[   19.193616] bus: 'pci': add driver agpgart-via
[   19.198209] initcall agp_via_init+0x0/0x29 returned 0 after 4 msecs
[   19.204522] calling  hangcheck_init+0x0/0x8a
[   19.208809] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[   19.217776] Hangcheck: Using get_cycles().
[   19.221889] initcall hangcheck_init+0x0/0x8a returned 0 after 12 msecs
[   19.228462] calling  init_tis+0x0/0x91
[   19.232235] pnp: the driver 'tpm_tis' has been registered
[   19.237649] bus: 'pnp': add driver tpm_tis
[   19.241888] initcall init_tis+0x0/0x91 returned 0 after 9 msecs
[   19.247856] calling  init_atmel+0x0/0x1cb
[   19.251884] bus: 'platform': add driver tpm_atmel
[   19.256721] bus: 'platform': remove driver tpm_atmel
[   19.261800] driver: 'tpm_atmel': driver_release
[   19.266351] initcall init_atmel+0x0/0x1cb returned -19 after 13 msecs
[   19.272840] calling  init_inf+0x0/0x12
[   19.276603] pnp: the driver 'tpm_inf_pnp' has been registered
[   19.282364] bus: 'pnp': add driver tpm_inf_pnp
[   19.286939] initcall init_inf+0x0/0x12 returned 0 after 9 msecs
[   19.292910] calling  cn_proc_init+0x0/0x3d
[   19.297027] initcall cn_proc_init+0x0/0x3d returned 0 after 0 msecs
[   19.303338] calling  intelfb_init+0x0/0x24d
[   19.307539] intelfb: intelfb_init
[   19.310871] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets
[   19.321832] intelfb: Version 0.9.5
[   19.325252] intelfb: intelfb_setup
[   19.328667] intelfb: no options
[   19.331832] bus: 'pci': add driver intelfb
[   19.336076] initcall intelfb_init+0x0/0x24d returned 0 after 27 msecs
[   19.342566] calling  serial8250_init+0x0/0x118
[   19.347025] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[   19.353144] Registering platform device 'serial8250'. Parent at platform
[   19.359855] device: 'serial8250': device_add
[   19.364155] bus: 'platform': add device serial8250
[   19.368974] PM: Adding info for platform:serial8250
[   19.374048] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   19.380073] device: 'ttyS0': device_add
[   19.383977] PM: Adding info for No Bus:ttyS0
[   19.388379] device: 'ttyS1': device_add
[   19.392283] PM: Adding info for No Bus:ttyS1
[   19.396679] device: 'ttyS2': device_add
[   19.400581] PM: Adding info for No Bus:ttyS2
[   19.404977] device: 'ttyS3': device_add
[   19.408872] PM: Adding info for No Bus:ttyS3
[   19.413253] bus: 'platform': add driver serial8250
[   19.418070] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[   19.427037] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[   19.435402] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[   19.442462] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[   19.450576] initcall serial8250_init+0x0/0x118 returned 0 after 98 msecs
[   19.457327] calling  serial8250_pnp_init+0x0/0x12
[   19.462047] pnp: the driver 'serial' has been registered
[   19.467373] bus: 'pnp': add driver serial
[   19.471497] bus: 'pnp': driver_probe_device: matched device 00:0b with driver serial
[   19.479251] bus: 'pnp': really_probe: probing driver serial with device 00:0b
[   19.486495] device: 'ttyS0': device_unregister
[   19.490956] PM: Removing info for No Bus:ttyS0
[   19.495557] device: 'ttyS0': device_create_release
[   19.500440] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   19.506031] device: 'ttyS0': device_add
[   19.509927] PM: Adding info for No Bus:ttyS0
[   19.514312] serial 00:0b: driver attached
[   19.518341] driver: '00:0b': driver_bound: bound to device 'serial'
[   19.524619] bus: 'pnp': really_probe: bound device 00:0b to driver serial
[   19.531536] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 66 msecs
[   19.538546] calling  serial8250_pci_init+0x0/0x1b
[   19.543266] bus: 'pci': add driver serial
[   19.547437] initcall serial8250_pci_init+0x0/0x1b returned 0 after 3 msecs
[   19.554361] calling  jsm_init_module+0x0/0x48
[   19.558751] bus: 'pci': add driver jsm
[   19.562651] initcall jsm_init_module+0x0/0x48 returned 0 after 3 msecs
[   19.569227] calling  init_kgdboc+0x0/0x16
[   19.575808] initcall init_kgdboc+0x0/0x16 returned 0 after 0 msecs
[   19.582039] calling  topology_sysfs_init+0x0/0x48
[   19.586796] initcall topology_sysfs_init+0x0/0x48 returned 0 after 0 msecs
[   19.593719] calling  brd_init+0x0/0x19d
[   19.598128] device: 'ram0': device_add
[   19.601920] PM: Adding info for No Bus:ram0
[   19.606247] device: '1:0': device_add
[   19.609946] PM: Adding info for No Bus:1:0
[   19.614170] device: 'ram1': device_add
[   19.617970] PM: Adding info for No Bus:ram1
[   19.622274] device: '1:1': device_add
[   19.625972] PM: Adding info for No Bus:1:1
[   19.630190] device: 'ram2': device_add
[   19.633998] PM: Adding info for No Bus:ram2
[   19.638314] device: '1:2': device_add
[   19.642020] PM: Adding info for No Bus:1:2
[   19.646252] device: 'ram3': device_add
[   19.650054] PM: Adding info for No Bus:ram3
[   19.654356] device: '1:3': device_add
[   19.658053] PM: Adding info for No Bus:1:3
[   19.662271] device: 'ram4': device_add
[   19.666071] PM: Adding info for No Bus:ram4
[   19.670378] device: '1:4': device_add
[   19.674076] PM: Adding info for No Bus:1:4
[   19.678293] device: 'ram5': device_add
[   19.682091] PM: Adding info for No Bus:ram5
[   19.686394] device: '1:5': device_add
[   19.690092] PM: Adding info for No Bus:1:5
[   19.694310] device: 'ram6': device_add
[   19.698108] PM: Adding info for No Bus:ram6
[   19.702420] device: '1:6': device_add
[   19.706118] PM: Adding info for No Bus:1:6
[   19.710335] device: 'ram7': device_add
[   19.714129] PM: Adding info for No Bus:ram7
[   19.718438] device: '1:7': device_add
[   19.722135] PM: Adding info for No Bus:1:7
[   19.726352] device: 'ram8': device_add
[   19.730144] PM: Adding info for No Bus:ram8
[   19.734444] device: '1:8': device_add
[   19.738147] PM: Adding info for No Bus:1:8
[   19.742365] device: 'ram9': device_add
[   19.746159] PM: Adding info for No Bus:ram9
[   19.750462] device: '1:9': device_add
[   19.754165] PM: Adding info for No Bus:1:9
[   19.758392] device: 'ram10': device_add
[   19.762272] PM: Adding info for No Bus:ram10
[   19.766670] device: '1:10': device_add
[   19.770470] PM: Adding info for No Bus:1:10
[   19.774787] device: 'ram11': device_add
[   19.778667] PM: Adding info for No Bus:ram11
[   19.783057] device: '1:11': device_add
[   19.786849] PM: Adding info for No Bus:1:11
[   19.791156] device: 'ram12': device_add
[   19.795036] PM: Adding info for No Bus:ram12
[   19.799425] device: '1:12': device_add
[   19.803210] PM: Adding info for No Bus:1:12
[   19.807523] device: 'ram13': device_add
[   19.811404] PM: Adding info for No Bus:ram13
[   19.815793] device: '1:13': device_add
[   19.819576] PM: Adding info for No Bus:1:13
[   19.823882] device: 'ram14': device_add
[   19.827768] PM: Adding info for No Bus:ram14
[   19.832164] device: '1:14': device_add
[   19.835947] PM: Adding info for No Bus:1:14
[   19.840254] device: 'ram15': device_add
[   19.844149] PM: Adding info for No Bus:ram15
[   19.848539] device: '1:15': device_add
[   19.852324] PM: Adding info for No Bus:1:15
[   19.856631] brd: module loaded
[   19.859705] initcall brd_init+0x0/0x19d returned 0 after 249 msecs
[   19.865934] calling  loop_init+0x0/0x1a6
[   19.870144] device: 'loop0': device_add
[   19.874029] PM: Adding info for No Bus:loop0
[   19.878419] device: '7:0': device_add
[   19.882117] PM: Adding info for No Bus:7:0
[   19.886335] device: 'loop1': device_add
[   19.890221] PM: Adding info for No Bus:loop1
[   19.894610] device: '7:1': device_add
[   19.898308] PM: Adding info for No Bus:7:1
[   19.902525] device: 'loop2': device_add
[   19.906411] PM: Adding info for No Bus:loop2
[   19.910801] device: '7:2': device_add
[   19.914498] PM: Adding info for No Bus:7:2
[   19.918716] device: 'loop3': device_add
[   19.922610] PM: Adding info for No Bus:loop3
[   19.926998] device: '7:3': device_add
[   19.930696] PM: Adding info for No Bus:7:3
[   19.934925] device: 'loop4': device_add
[   19.938806] PM: Adding info for No Bus:loop4
[   19.943201] device: '7:4': device_add
[   19.946899] PM: Adding info for No Bus:7:4
[   19.951117] device: 'loop5': device_add
[   19.954996] PM: Adding info for No Bus:loop5
[   19.959409] device: '7:5': device_add
[   19.963113] PM: Adding info for No Bus:7:5
[   19.967331] device: 'loop6': device_add
[   19.971211] PM: Adding info for No Bus:loop6
[   19.975600] device: '7:6': device_add
[   19.979304] PM: Adding info for No Bus:7:6
[   19.983530] device: 'loop7': device_add
[   19.987411] PM: Adding info for No Bus:loop7
[   19.991808] device: '7:7': device_add
[   19.995512] PM: Adding info for No Bus:7:7
[   19.999731] loop: module loaded
[   20.002894] initcall loop_init+0x0/0x1a6 returned 0 after 126 msecs
[   20.009209] calling  cpqarray_init+0x0/0x264
[   20.013495] Compaq SMART2 Driver (v 2.6.0)
[   20.017609] bus: 'pci': add driver cpqarray
[   20.021942] initcall cpqarray_init+0x0/0x264 returned 0 after 8 msecs
[   20.028431] calling  DAC960_init_module+0x0/0x52
[   20.033064] bus: 'pci': add driver DAC960
[   20.037222] device: 'dac960_gam': device_add
[   20.041552] PM: Adding info for No Bus:dac960_gam
[   20.046366] initcall DAC960_init_module+0x0/0x52 returned 0 after 12 msecs
[   20.053292] calling  pkt_init+0x0/0x198
[   20.057196] device class 'pktcdvd': registering
[   20.061856] device: 'pktcdvd': device_add
[   20.065917] PM: Adding info for No Bus:pktcdvd
[   20.070478] initcall pkt_init+0x0/0x198 returned 0 after 12 msecs
[   20.076618] calling  mm_init+0x0/0x192
[   20.080387] bus: 'pci': add driver umem
[   20.084375] MM: desc_per_page = 128
[   20.087882] initcall mm_init+0x0/0x192 returned 0 after 7 msecs
[   20.093852] calling  nbd_init+0x0/0x304
[   20.098569] nbd: registered device at major 43
[   20.103032] device: 'nbd0': device_add
[   20.106825] PM: Adding info for No Bus:nbd0
[   20.111151] device: '43:0': device_add
[   20.114936] PM: Adding info for No Bus:43:0
[   20.119243] device: 'nbd1': device_add
[   20.123042] PM: Adding info for No Bus:nbd1
[   20.127370] device: '43:1': device_add
[   20.131155] PM: Adding info for No Bus:43:1
[   20.135462] device: 'nbd2': device_add
[   20.139269] PM: Adding info for No Bus:nbd2
[   20.143588] device: '43:2': device_add
[   20.147381] PM: Adding info for No Bus:43:2
[   20.151685] device: 'nbd3': device_add
[   20.155479] PM: Adding info for No Bus:nbd3
[   20.159802] device: '43:3': device_add
[   20.163588] PM: Adding info for No Bus:43:3
[   20.167906] device: 'nbd4': device_add
[   20.171707] PM: Adding info for No Bus:nbd4
[   20.176027] device: '43:4': device_add
[   20.179811] PM: Adding info for No Bus:43:4
[   20.184117] device: 'nbd5': device_add
[   20.187915] PM: Adding info for No Bus:nbd5
[   20.192241] device: '43:5': device_add
[   20.196033] PM: Adding info for No Bus:43:5
[   20.200337] device: 'nbd6': device_add
[   20.204129] PM: Adding info for No Bus:nbd6
[   20.208448] device: '43:6': device_add
[   20.212240] PM: Adding info for No Bus:43:6
[   20.216546] device: 'nbd7': device_add
[   20.220341] PM: Adding info for No Bus:nbd7
[   20.224665] device: '43:7': device_add
[   20.228448] PM: Adding info for No Bus:43:7
[   20.232754] device: 'nbd8': device_add
[   20.236555] PM: Adding info for No Bus:nbd8
[   20.240890] device: '43:8': device_add
[   20.244670] PM: Adding info for No Bus:43:8
[   20.248974] device: 'nbd9': device_add
[   20.252770] PM: Adding info for No Bus:nbd9
[   20.257094] device: '43:9': device_add
[   20.260884] PM: Adding info for No Bus:43:9
[   20.265189] device: 'nbd10': device_add
[   20.269069] PM: Adding info for No Bus:nbd10
[   20.273481] device: '43:10': device_add
[   20.277353] PM: Adding info for No Bus:43:10
[   20.281754] device: 'nbd11': device_add
[   20.285635] PM: Adding info for No Bus:nbd11
[   20.290061] device: '43:11': device_add
[   20.293932] PM: Adding info for No Bus:43:11
[   20.298336] device: 'nbd12': device_add
[   20.302224] PM: Adding info for No Bus:nbd12
[   20.306657] device: '43:12': device_add
[   20.310534] PM: Adding info for No Bus:43:12
[   20.314926] device: 'nbd13': device_add
[   20.318814] PM: Adding info for No Bus:nbd13
[   20.323220] device: '43:13': device_add
[   20.329653] PM: Adding info for No Bus:43:13
[   20.334045] device: 'nbd14': device_add
[   20.337925] PM: Adding info for No Bus:nbd14
[   20.342338] device: '43:14': device_add
[   20.346221] PM: Adding info for No Bus:43:14
[   20.350614] device: 'nbd15': device_add
[   20.354498] PM: Adding info for No Bus:nbd15
[   20.358910] device: '43:15': device_add
[   20.362782] PM: Adding info for No Bus:43:15
[   20.367174] initcall nbd_init+0x0/0x304 returned 0 after 256 msecs
[   20.373404] calling  carm_init+0x0/0x1b
[   20.377258] bus: 'pci': add driver sx8
[   20.381152] initcall carm_init+0x0/0x1b returned 0 after 3 msecs
[   20.387206] calling  ub_init+0x0/0x88
[   20.390889] bus: 'usb': add driver ub
[   20.394690] usbcore: registered new interface driver ub
[   20.399940] initcall ub_init+0x0/0x88 returned 0 after 8 msecs
[   20.405822] calling  xlblk_init+0x0/0x7a
[   20.409761] initcall xlblk_init+0x0/0x7a returned -19 after 0 msecs
[   20.416073] calling  eeepc_laptop_init+0x0/0x1eb
[   20.420707] bus: 'acpi': add driver Eee PC Hotkey Driver
[   20.426212] bus: 'acpi': remove driver Eee PC Hotkey Driver
[   20.431899] driver: 'Eee PC Hotkey Driver': driver_release
[   20.437401] initcall eeepc_laptop_init+0x0/0x1eb returned -19 after 15 msecs
[   20.444493] calling  msi_init+0x0/0x13a
[   20.448348] initcall msi_init+0x0/0x13a returned -19 after 0 msecs
[   20.454577] calling  compal_init+0x0/0x118
[   20.458690] initcall compal_init+0x0/0x118 returned -19 after 0 msecs
[   20.465179] calling  hp_wmi_init+0x0/0x152
[   20.469293] initcall hp_wmi_init+0x0/0x152 returned 0 after 0 msecs
[   20.475604] calling  tifm_7xx1_init+0x0/0x1b
[   20.479891] bus: 'pci': add driver tifm_7xx1
[   20.484309] initcall tifm_7xx1_init+0x0/0x1b returned 0 after 4 msecs
[   20.490798] calling  phantom_init+0x0/0x10a
[   20.494999] device class 'phantom': registering
[   20.499647] bus: 'pci': add driver phantom
[   20.503892] Phantom Linux Driver, version n0.9.8, init OK
[   20.509305] initcall phantom_init+0x0/0x10a returned 0 after 13 msecs
[   20.515792] calling  ioc4_init+0x0/0x20
[   20.519646] bus: 'pci': add driver IOC4
[   20.523629] initcall ioc4_init+0x0/0x20 returned 0 after 3 msecs
[   20.529686] calling  thinkpad_acpi_module_init+0x0/0x945
[   20.535056] initcall thinkpad_acpi_module_init+0x0/0x945 returned -19 after 0 msecs
[   20.542763] calling  enclosure_init+0x0/0x19
[   20.547049] device class 'enclosure': registering
[   20.551867] initcall enclosure_init+0x0/0x19 returned 0 after 4 msecs
[   20.558357] calling  init_kgdbts+0x0/0x16
[   20.562384] initcall init_kgdbts+0x0/0x16 returned 0 after 0 msecs
[   20.568610] calling  xp_init+0x0/0x52
[   20.572290] initcall xp_init+0x0/0x52 returned -19 after 0 msecs
[   20.578344] calling  xpc_init+0x0/0x38e
[   20.582198] initcall xpc_init+0x0/0x38e returned -19 after 0 msecs
[   20.588423] calling  xpnet_init+0x0/0x1c7
[   20.592451] initcall xpnet_init+0x0/0x1c7 returned -19 after 0 msecs
[   20.598852] calling  gru_init+0x0/0x469
[   20.602706] initcall gru_init+0x0/0x469 returned 0 after 0 msecs
[   20.608757] calling  pasic3_base_init+0x0/0x19
[   20.613222] bus: 'platform': add driver pasic3
[   20.617798] bus: 'platform': remove driver pasic3
[   20.622616] driver: 'pasic3': driver_release
[   20.626906] initcall pasic3_base_init+0x0/0x19 returned -19 after 13 msecs
[   20.633828] calling  e1000_init_module+0x0/0x87
[   20.638374] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[   20.644826] Copyright (c) 1999-2006 Intel Corporation.
[   20.649979] bus: 'pci': add driver e1000
[   20.654058] initcall e1000_init_module+0x0/0x87 returned 0 after 14 msecs
[   20.660893] calling  e1000_init_module+0x0/0x6b
[   20.665439] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
[   20.671543] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[   20.677389] bus: 'pci': add driver e1000e
[   20.681445] bus: 'pci': driver_probe_device: matched device 0000:04:00.0 with driver e1000e
[   20.689808] bus: 'pci': really_probe: probing driver e1000e with device 0000:04:00.0
[   20.697610] vendor=8086 device=27e2
[   20.701118] e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   20.708098] e1000e 0000:04:00.0: setting latency timer to 64
[   20.827062] device: 'eth0': device_add
[   20.830922] PM: Adding info for No Bus:eth0
[   20.835279] 0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:ab:6e:84
[   20.842689] 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection
[   20.849120] 0000:04:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[   20.855312] driver: '0000:04:00.0': driver_bound: bound to device 'e1000e'
[   20.862198] bus: 'pci': really_probe: bound device 0000:04:00.0 to driver e1000e
[   20.869729] initcall e1000_init_module+0x0/0x6b returned 0 after 194 msecs
[   20.876649] calling  igb_init_module+0x0/0x6d
[   20.881021] Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2
[   20.887731] Copyright (c) 2008 Intel Corporation.
[   20.892451] bus: 'pci': add driver igb
[   20.896348] initcall igb_init_module+0x0/0x6d returned 0 after 14 msecs
[   20.903011] calling  ixgbe_init_module+0x0/0x66
[   20.907556] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k4
[   20.915396] ixgbe: Copyright (c) 1999-2007 Intel Corporation.
[   20.921155] bus: 'pci': add driver ixgbe
[   20.925222] initcall ixgbe_init_module+0x0/0x66 returned 0 after 16 msecs
[   20.932055] calling  ixgb_init_module+0x0/0x4c
[   20.936515] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[   20.943140] Copyright (c) 1999-2008 Intel Corporation.
[   20.948292] bus: 'pci': add driver ixgb
[   20.952275] initcall ixgb_init_module+0x0/0x4c returned 0 after 15 msecs
[   20.959023] calling  ipg_init_module+0x0/0x1b
[   20.963395] bus: 'pci': add driver Sundance Technology IPG Triple-Speed Ethernet
[   20.970934] initcall ipg_init_module+0x0/0x1b returned 0 after 7 msecs
[   20.977509] calling  cxgb3_init_module+0x0/0x20
[   20.982055] bus: 'pci': add driver cxgb3
[   20.986131] initcall cxgb3_init_module+0x0/0x20 returned 0 after 3 msecs
[   20.992876] calling  bonding_init+0x0/0x8df
[   20.997076] Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008)
[   21.003355] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[   21.020564] device: 'bond0': device_add
[   21.024509] PM: Adding info for No Bus:bond0
[   21.028975] initcall bonding_init+0x0/0x8df returned 0 after 30 msecs
[   21.035463] calling  atl1_init_module+0x0/0x1b
[   21.039924] bus: 'pci': add driver atl1
[   21.043909] initcall atl1_init_module+0x0/0x1b returned 0 after 3 msecs
[   21.050571] calling  bdx_module_init+0x0/0x9a
[   21.054947] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[   21.060705] tehuti: Options: hw_csum 
[   21.064384] bus: 'pci': add driver tehuti
[   21.068541] initcall bdx_module_init+0x0/0x9a returned 0 after 12 msecs
[   21.075203] calling  rr_init_module+0x0/0x1b
[   21.079490] bus: 'pci': add driver rrunner
[   21.083740] initcall rr_init_module+0x0/0x1b returned 0 after 4 msecs
[   21.090229] calling  happy_meal_probe+0x0/0x1b
[   21.094689] bus: 'pci': add driver hme
[   21.098583] initcall happy_meal_probe+0x0/0x1b returned 0 after 3 msecs
[   21.105246] calling  vortex_init+0x0/0xad
[   21.109276] bus: 'pci': add driver 3c59x
[   21.113344] initcall vortex_init+0x0/0xad returned 0 after 3 msecs
[   21.119571] calling  typhoon_init+0x0/0x1b
[   21.123684] bus: 'pci': add driver typhoon
[   21.127927] initcall typhoon_init+0x0/0x1b returned 0 after 4 msecs
[   21.134242] calling  ne2k_pci_init+0x0/0x1b
[   21.138441] bus: 'pci': add driver ne2k-pci
[   21.142772] initcall ne2k_pci_init+0x0/0x1b returned 0 after 4 msecs
[   21.149175] calling  pcnet32_init_module+0x0/0x129
[   21.153980] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   21.160084] bus: 'pci': add driver pcnet32
[   21.164332] initcall pcnet32_init_module+0x0/0x129 returned 0 after 9 msecs
[   21.171337] calling  eepro100_init_module+0x0/0x1b
[   21.176143] bus: 'pci': add driver eepro100
[   21.180485] initcall eepro100_init_module+0x0/0x1b returned 0 after 4 msecs
[   21.187493] calling  e100_init_module+0x0/0x5d
[   21.191952] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[   21.198056] e100: Copyright(c) 1999-2006 Intel Corporation
[   21.203553] bus: 'pci': add driver e100
[   21.207540] initcall e100_init_module+0x0/0x5d returned 0 after 14 msecs
[   21.214288] calling  epic_init+0x0/0x1b
[   21.218141] bus: 'pci': add driver epic100
[   21.222384] initcall epic_init+0x0/0x1b returned 0 after 4 msecs
[   21.228437] calling  sis900_init_module+0x0/0x1b
[   21.233069] bus: 'pci': add driver sis900
[   21.237224] initcall sis900_init_module+0x0/0x1b returned 0 after 3 msecs
[   21.244062] calling  yellowfin_init+0x0/0x1b
[   21.248349] bus: 'pci': add driver yellowfin
[   21.252773] initcall yellowfin_init+0x0/0x1b returned 0 after 4 msecs
[   21.259261] calling  natsemi_init_mod+0x0/0x1b
[   21.263721] bus: 'pci': add driver natsemi
[   21.267964] initcall natsemi_init_mod+0x0/0x1b returned 0 after 4 msecs
[   21.274626] calling  ns83820_init+0x0/0x29
[   21.278738] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[   21.285536] bus: 'pci': add driver ns83820
[   21.289777] initcall ns83820_init+0x0/0x29 returned 0 after 10 msecs
[   21.296178] calling  tg3_init+0x0/0x1b
[   21.299945] bus: 'pci': add driver tg3
[   21.303845] initcall tg3_init+0x0/0x1b returned 0 after 3 msecs
[   21.309815] calling  bnx2_init+0x0/0x1b
[   21.313668] bus: 'pci': add driver bnx2
[   21.317651] initcall bnx2_init+0x0/0x1b returned 0 after 3 msecs
[   21.323704] calling  sky2_init_module+0x0/0x1b
[   21.328165] bus: 'pci': add driver sky2
[   21.332156] initcall sky2_init_module+0x0/0x1b returned 0 after 3 msecs
[   21.338818] calling  rhine_init+0x0/0x63
[   21.345314] bus: 'pci': add driver via-rhine
[   21.349730] initcall rhine_init+0x0/0x63 returned 0 after 4 msecs
[   21.355869] calling  velocity_init_module+0x0/0x3b
[   21.360675] bus: 'pci': add driver via-velocity
[   21.365348] initcall velocity_init_module+0x0/0x3b returned 0 after 4 msecs
[   21.372354] calling  marvell_init+0x0/0x71
[   21.376467] bus: 'mdio_bus': add driver Marvell 88E1101
[   21.381809] bus: 'mdio_bus': add driver Marvell 88E1112
[   21.387153] bus: 'mdio_bus': add driver Marvell 88E1111
[   21.392494] bus: 'mdio_bus': add driver Marvell 88E1145
[   21.397845] bus: 'mdio_bus': add driver Marvell 88E1240
[   21.403187] initcall marvell_init+0x0/0x71 returned 0 after 25 msecs
[   21.409590] calling  davicom_init+0x0/0x5d
[   21.413702] bus: 'mdio_bus': add driver Davicom DM9161E
[   21.419043] bus: 'mdio_bus': add driver Davicom DM9161A
[   21.424385] bus: 'mdio_bus': add driver Davicom DM9131
[   21.429640] initcall davicom_init+0x0/0x5d returned 0 after 15 msecs
[   21.436040] calling  cicada_init+0x0/0x3f
[   21.440067] bus: 'mdio_bus': add driver Cicada Cis8204
[   21.445319] bus: 'mdio_bus': add driver Cicada Cis8201
[   21.450584] initcall cicada_init+0x0/0x3f returned 0 after 10 msecs
[   21.456898] calling  qs6612_init+0x0/0x12
[   21.460925] bus: 'mdio_bus': add driver QS6612
[   21.465493] initcall qs6612_init+0x0/0x12 returned 0 after 4 msecs
[   21.471719] calling  broadcom_init+0x0/0xbb
[   21.475918] bus: 'mdio_bus': add driver Broadcom BCM5411
[   21.481345] bus: 'mdio_bus': add driver Broadcom BCM5421
[   21.486776] bus: 'mdio_bus': add driver Broadcom BCM5461
[   21.492205] bus: 'mdio_bus': add driver Broadcom BCM5464
[   21.497636] bus: 'mdio_bus': add driver Broadcom BCM5481
[   21.503066] bus: 'mdio_bus': add driver Broadcom BCM5482
[   21.508504] initcall broadcom_init+0x0/0xbb returned 0 after 31 msecs
[   21.514995] calling  realtek_init+0x0/0x12
[   21.519107] bus: 'mdio_bus': add driver RTL821x Gigabit Ethernet
[   21.525240] initcall realtek_init+0x0/0x12 returned 0 after 5 msecs
[   21.531552] calling  fixed_mdio_bus_init+0x0/0xa8
[   21.536274] Registering platform device 'Fixed MDIO bus.0'. Parent at platform
[   21.543509] device: 'Fixed MDIO bus.0': device_add
[   21.548322] bus: 'platform': add device Fixed MDIO bus.0
[   21.553661] PM: Adding info for platform:Fixed MDIO bus.0
[   21.559171] Fixed MDIO Bus: probed
[   21.562593] initcall fixed_mdio_bus_init+0x0/0xa8 returned 0 after 25 msecs
[   21.569601] calling  hamachi_init+0x0/0x1b
[   21.573714] bus: 'pci': add driver hamachi
[   21.577957] initcall hamachi_init+0x0/0x1b returned 0 after 4 msecs
[   21.584269] calling  net_olddevs_init+0x0/0xa0
[   21.588732] initcall net_olddevs_init+0x0/0xa0 returned 0 after 0 msecs
[   21.595390] calling  hp100_module_init+0x0/0x1b
[   21.599937] bus: 'pci': add driver hp100
[   21.604005] initcall hp100_module_init+0x0/0x1b returned 0 after 3 msecs
[   21.610754] calling  b44_init+0x0/0x5c
[   21.614521] bus: 'pci': add driver b44
[   21.618424] bus: 'ssb': add driver b44
[   21.622294] initcall b44_init+0x0/0x5c returned 0 after 7 msecs
[   21.628260] calling  init_nic+0x0/0x1b
[   21.632028] bus: 'pci': add driver forcedeth
[   21.636447] initcall init_nic+0x0/0x1b returned 0 after 4 msecs
[   21.642420] calling  netif_init+0x0/0x6a
[   21.646359] initcall netif_init+0x0/0x6a returned -19 after 0 msecs
[   21.652673] calling  dummy_init_module+0x0/0xb5
[   21.657237] device: 'dummy0': device_add
[   21.661262] PM: Adding info for No Bus:dummy0
[   21.665756] initcall dummy_init_module+0x0/0xb5 returned 0 after 8 msecs
[   21.672502] calling  macvlan_init_module+0x0/0x53
[   21.677224] initcall macvlan_init_module+0x0/0x53 returned 0 after 0 msecs
[   21.684141] calling  cp_init+0x0/0x1b
[   21.687822] bus: 'pci': add driver 8139cp
[   21.691989] initcall cp_init+0x0/0x1b returned 0 after 3 msecs
[   21.697871] calling  rtl8139_init_module+0x0/0x1b
[   21.702591] bus: 'pci': add driver 8139too
[   21.706835] initcall rtl8139_init_module+0x0/0x1b returned 0 after 4 msecs
[   21.713757] calling  sc92031_init+0x0/0x29
[   21.717869] Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
[   21.723800] bus: 'pci': add driver sc92031
[   21.728042] initcall sc92031_init+0x0/0x29 returned 0 after 9 msecs
[   21.734357] calling  eql_init_module+0x0/0x65
[   21.738728] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[   21.747272] device: 'eql': device_add
[   21.751038] PM: Adding info for No Bus:eql
[   21.755288] initcall eql_init_module+0x0/0x65 returned 0 after 15 msecs
[   21.761953] calling  tun_init+0x0/0xa0
[   21.765720] tun: Universal TUN/TAP device driver, 1.6
[   21.770786] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   21.777003] device: 'tun': device_add
[   21.780739] PM: Adding info for No Bus:tun
[   21.784947] initcall tun_init+0x0/0xa0 returned 0 after 18 msecs
[   21.791003] calling  veth_init+0x0/0x1e
[   21.794857] initcall veth_init+0x0/0x1e returned 0 after 0 msecs
[   21.800909] calling  rio_init+0x0/0x1b
[   21.804675] bus: 'pci': add driver dl2k
[   21.808658] initcall rio_init+0x0/0x1b returned 0 after 3 msecs
[   21.814628] calling  rtl8169_init_module+0x0/0x1b
[   21.819348] bus: 'pci': add driver r8169
[   21.823424] initcall rtl8169_init_module+0x0/0x1b returned 0 after 3 msecs
[   21.830346] calling  amd8111e_init+0x0/0x1b
[   21.834546] bus: 'pci': add driver amd8111e
[   21.838876] initcall amd8111e_init+0x0/0x1b returned 0 after 4 msecs
[   21.845279] calling  s2io_starter+0x0/0x1b
[   21.849392] bus: 'pci': add driver S2IO
[   21.853372] initcall s2io_starter+0x0/0x1b returned 0 after 3 msecs
[   21.859684] calling  myri10ge_init_module+0x0/0x70
[   21.864489] myri10ge: Version 1.4.3-1.358
[   21.868514] bus: 'pci': add driver myri10ge
[   21.872846] initcall myri10ge_init_module+0x0/0x70 returned 0 after 7 msecs
[   21.879851] calling  mlx4_init+0x0/0x34
[   21.883757] bus: 'pci': add driver mlx4_core
[   21.888178] initcall mlx4_init+0x0/0x34 returned 0 after 4 msecs
[   21.894236] calling  enc28j60_init+0x0/0x23
[   21.898438] bus: 'spi': add driver enc28j60
[   21.902741] initcall enc28j60_init+0x0/0x23 returned 0 after 4 msecs
[   21.909144] calling  ipddp_init_module+0x0/0x108
[   21.913782] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   21.921369] device: 'ipddp0': device_add
[   21.925394] PM: Adding info for No Bus:ipddp0
[   21.929888] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   21.938685] initcall ipddp_init_module+0x0/0x108 returned 0 after 23 msecs
[   21.945608] calling  arcnet_init+0x0/0x5d
[   21.949635] arcnet loaded.
[   21.952360] initcall arcnet_init+0x0/0x5d returned 0 after 2 msecs
[   21.958588] calling  arcnet_rfc1201_init+0x0/0x73
[   21.963306] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[   21.970191] initcall arcnet_rfc1201_init+0x0/0x73 returned 0 after 6 msecs
[   21.977112] calling  arcnet_rfc1051_init+0x0/0x47
[   21.981831] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
[   21.989325] initcall arcnet_rfc1051_init+0x0/0x47 returned 0 after 7 msecs
[   21.996243] calling  arcnet_raw_init+0x0/0x5f
[   22.000614] arcnet: raw mode (`r') encapsulation support loaded.
[   22.006633] initcall arcnet_raw_init+0x0/0x5f returned 0 after 5 msecs
[   22.013208] calling  com90xx_init+0x0/0xeea
[   22.017427] arcnet: COM90xx chipset support
[   22.319635] S3: No ARCnet cards found.
[   22.323406] initcall com90xx_init+0x0/0xeea returned -5 after 291 msecs
[   22.330068] initcall com90xx_init+0x0/0xeea returned with error code -5 
[   22.336815] calling  com90io_init+0x0/0x493
[   22.341022] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[   22.348256] E-mail me if you actually test this driver, please!
[   22.354186]  arc%d: No autoprobe for IO mapped cards; you must specify the base address!
[   22.362291] initcall com90io_init+0x0/0x493 returned -19 after 20 msecs
[   22.368950] calling  arc_rimi_init+0x0/0x4b1
[   22.373241] arcnet: RIM I (entirely mem-mapped) support
[   22.378479] E-mail me if you actually test the RIM I driver, please!
[   22.384842]  arc%d: Given: node 00h, shmem 0h, irq 0
[   22.389820]  arc%d: No autoprobe for RIM I; you must specify the shmem and irq!
[   22.397146] initcall arc_rimi_init+0x0/0x4b1 returned -5 after 22 msecs
[   22.403805] initcall arc_rimi_init+0x0/0x4b1 returned with error code -5 
[   22.410644] calling  catc_init+0x0/0x39
[   22.414498] bus: 'usb': add driver catc
[   22.418465] usbcore: registered new interface driver catc
[   22.423880] catc: v2.8 CATC EL1210A NetMate USB Ethernet driver
[   22.429812] initcall catc_init+0x0/0x39 returned 0 after 14 msecs
[   22.435951] calling  kaweth_init+0x0/0x30
[   22.439978] drivers/net/usb/kaweth.c: Driver loading
[   22.444956] bus: 'usb': add driver kaweth
[   22.449102] usbcore: registered new interface driver kaweth
[   22.454692] initcall kaweth_init+0x0/0x30 returned 0 after 14 msecs
[   22.461005] calling  pegasus_init+0x0/0x19b
[   22.465206] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[   22.472761] bus: 'usb': add driver pegasus
[   22.476988] usbcore: registered new interface driver pegasus
[   22.482663] initcall pegasus_init+0x0/0x19b returned 0 after 16 msecs
[   22.489152] calling  usb_rtl8150_init+0x0/0x29
[   22.493611] rtl8150: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
[   22.500496] bus: 'usb': add driver rtl8150
[   22.504719] usbcore: registered new interface driver rtl8150
[   22.510394] initcall usb_rtl8150_init+0x0/0x29 returned 0 after 16 msecs
[   22.517144] calling  asix_init+0x0/0x1b
[   22.520993] bus: 'usb': add driver asix
[   22.524957] usbcore: registered new interface driver asix
[   22.530373] initcall asix_init+0x0/0x1b returned 0 after 8 msecs
[   22.536424] calling  cdc_init+0x0/0x1b
[   22.540192] bus: 'usb': add driver cdc_ether
[   22.547142] usbcore: registered new interface driver cdc_ether
[   22.552992] initcall cdc_init+0x0/0x1b returned 0 after 12 msecs
[   22.559048] calling  dm9601_init+0x0/0x1b
[   22.563075] bus: 'usb': add driver dm9601
[   22.567212] usbcore: registered new interface driver dm9601
[   22.572807] initcall dm9601_init+0x0/0x1b returned 0 after 9 msecs
[   22.579036] calling  usbnet_init+0x0/0x1b
[   22.583062] bus: 'usb': add driver gl620a
[   22.587200] usbcore: registered new interface driver gl620a
[   22.592789] initcall usbnet_init+0x0/0x1b returned 0 after 9 msecs
[   22.599016] calling  plusb_init+0x0/0x1b
[   22.602955] bus: 'usb': add driver plusb
[   22.607016] usbcore: registered new interface driver plusb
[   22.612520] initcall plusb_init+0x0/0x1b returned 0 after 9 msecs
[   22.618660] calling  rndis_init+0x0/0x1b
[   22.622599] bus: 'usb': add driver rndis_host
[   22.627083] usbcore: registered new interface driver rndis_host
[   22.633019] initcall rndis_init+0x0/0x1b returned 0 after 9 msecs
[   22.639160] calling  cdc_subset_init+0x0/0x1b
[   22.643532] bus: 'usb': add driver cdc_subset
[   22.648014] usbcore: registered new interface driver cdc_subset
[   22.653949] initcall cdc_subset_init+0x0/0x1b returned 0 after 9 msecs
[   22.660521] calling  mcs7830_init+0x0/0x1b
[   22.664634] bus: 'usb': add driver MOSCHIP usb-ethernet driver
[   22.670593] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   22.678005] initcall mcs7830_init+0x0/0x1b returned 0 after 12 msecs
[   22.684404] calling  usbnet_init+0x0/0x2b
[   22.688435] initcall usbnet_init+0x0/0x2b returned 0 after 0 msecs
[   22.694663] calling  strip_init_driver+0x0/0x6a
[   22.699208] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
[   22.705579] initcall strip_init_driver+0x0/0x6a returned 0 after 6 msecs
[   22.712323] calling  sixpack_init_driver+0x0/0x44
[   22.717042] AX.25: 6pack driver, Revision: 0.3.0
[   22.721676] initcall sixpack_init_driver+0x0/0x44 returned 0 after 4 msecs
[   22.728593] calling  bpq_init_driver+0x0/0x65
[   22.732970] AX.25: bpqether driver version 004
[   22.737431] initcall bpq_init_driver+0x0/0x65 returned 0 after 4 msecs
[   22.744004] calling  init_baycomserfdx+0x0/0x104
[   22.748638] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[   22.748638] baycom_ser_fdx: version 0.10 compiled 13:52:58 Sep 10 2008
[   22.761630] device: 'bcsf0': device_add
[   22.765574] PM: Adding info for No Bus:bcsf0
[   22.769990] device: 'bcsf1': device_add
[   22.773931] PM: Adding info for No Bus:bcsf1
[   22.778353] device: 'bcsf2': device_add
[   22.782294] PM: Adding info for No Bus:bcsf2
[   22.786708] device: 'bcsf3': device_add
[   22.790644] PM: Adding info for No Bus:bcsf3
[   22.795052] initcall init_baycomserfdx+0x0/0x104 returned 0 after 44 msecs
[   22.801974] calling  hdlcdrv_init_driver+0x0/0x24
[   22.806695] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[   22.812453] hdlcdrv: version 0.8 compiled 13:53:03 Sep 10 2008
[   22.818299] initcall hdlcdrv_init_driver+0x0/0x24 returned 0 after 11 msecs
[   22.825306] calling  init_baycomserhdx+0x0/0xf2
[   22.829851] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[   22.829852] baycom_ser_hdx: version 0.10 compiled 13:53:06 Sep 10 2008
[   22.842843] device: 'bcsh0': device_add
[   22.846812] PM: Adding info for No Bus:bcsh0
[   22.851234] device: 'bcsh1': device_add
[   22.855184] PM: Adding info for No Bus:bcsh1
[   22.859599] device: 'bcsh2': device_add
[   22.863534] PM: Adding info for No Bus:bcsh2
[   22.867948] device: 'bcsh3': device_add
[   22.871888] PM: Adding info for No Bus:bcsh3
[   22.876298] initcall init_baycomserhdx+0x0/0xf2 returned 0 after 44 msecs
[   22.883132] calling  usb_irda_init+0x0/0x3e
[   22.887333] bus: 'usb': add driver irda-usb
[   22.891643] usbcore: registered new interface driver irda-usb
[   22.897406] USB IrDA support registered
[   22.901259] initcall usb_irda_init+0x0/0x3e returned 0 after 13 msecs
[   22.907744] calling  stir_init+0x0/0x1b
[   22.911597] bus: 'usb': add driver stir4200
[   22.915906] usbcore: registered new interface driver stir4200
[   22.921670] initcall stir_init+0x0/0x1b returned 0 after 9 msecs
[   22.927724] calling  nsc_ircc_init+0x0/0x1fe
[   22.932012] bus: 'platform': add driver nsc-ircc
[   22.936769] pnp: the driver 'nsc-ircc' has been registered
[   22.942269] bus: 'pnp': add driver nsc-ircc
[   22.946609] bus: 'platform': remove driver nsc-ircc
[   22.951600] driver: 'nsc-ircc': driver_release
[   22.956072] bus: 'pnp': remove driver nsc-ircc
[   22.960629] driver: 'nsc-ircc': driver_release
[   22.965093] pnp: the driver 'nsc-ircc' has been unregistered
[   22.970764] initcall nsc_ircc_init+0x0/0x1fe returned -19 after 36 msecs
[   22.977512] calling  w83977af_init+0x0/0x4c7
[   22.981859] initcall w83977af_init+0x0/0x4c7 returned -19 after 0 msecs
[   22.988518] calling  smsc_ircc_init+0x0/0x52a
[   22.992890] bus: 'platform': add driver smsc-ircc2
[   22.997943] bus: 'platform': remove driver smsc-ircc2
[   23.003107] driver: 'smsc-ircc2': driver_release
[   23.007742] initcall smsc_ircc_init+0x0/0x52a returned -19 after 14 msecs
[   23.014578] calling  ali_ircc_init+0x0/0x659
[   23.018864] bus: 'platform': add driver ali-ircc
[   23.023655] bus: 'platform': remove driver ali-ircc
[   23.028646] driver: 'ali-ircc': driver_release
[   23.033111] initcall ali_ircc_init+0x0/0x659 returned -19 after 13 msecs
[   23.039857] calling  mcs_init+0x0/0x43
[   23.043623] bus: 'usb': add driver mcs7780
[   23.047846] usbcore: registered new interface driver mcs7780
[   23.053522] initcall mcs_init+0x0/0x43 returned 0 after 9 msecs
[   23.059487] calling  irtty_sir_init+0x0/0x3f
[   23.063774] initcall irtty_sir_init+0x0/0x3f returned 0 after 0 msecs
[   23.070262] calling  sir_wq_init+0x0/0x33
[   23.074343] initcall sir_wq_init+0x0/0x33 returned 0 after 0 msecs
[   23.080569] calling  ksdazzle_init+0x0/0x1b
[   23.084767] bus: 'usb': add driver ksdazzle-sir
[   23.089423] usbcore: registered new interface driver ksdazzle-sir
[   23.095531] initcall ksdazzle_init+0x0/0x1b returned 0 after 10 msecs
[   23.102021] calling  init_netconsole+0x0/0x238
[   23.106494] console [netcon0] enabled
[   23.110174] netconsole: network logging started
[   23.114720] initcall init_netconsole+0x0/0x238 returned 0 after 7 msecs
[   23.121381] calling  netxen_init_module+0x0/0x4d
[   23.126067] bus: 'pci': add driver netxen_nic
[   23.130585] initcall netxen_init_module+0x0/0x4d returned 0 after 4 msecs
[   23.137420] calling  niu_init+0x0/0x3d
[   23.141188] bus: 'pci': add driver niu
[   23.145100] initcall niu_init+0x0/0x3d returned 0 after 3 msecs
[   23.151067] calling  videodev_init+0x0/0x84
[   23.155266] Linux video capture interface: v2.00
[   23.159904] device class 'video4linux': registering
[   23.164900] initcall videodev_init+0x0/0x84 returned 0 after 9 msecs
[   23.171303] calling  dabusb_init+0x0/0xe8
[   23.175331] bus: 'usb': add driver dabusb
[   23.179482] usbcore: registered new interface driver dabusb
[   23.185074] dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999
[   23.191438] initcall dabusb_init+0x0/0xe8 returned 0 after 15 msecs
[   23.197754] calling  maxiradio_radio_init+0x0/0x1b
[   23.202559] bus: 'pci': add driver radio-maxiradio
[   23.207506] initcall maxiradio_radio_init+0x0/0x1b returned 0 after 4 msecs
[   23.214513] calling  dsbr100_init+0x0/0x34
[   23.218625] bus: 'usb': add driver dsbr100
[   23.222848] usbcore: registered new interface driver dsbr100
[   23.228523] dsbr100: v0.41:D-Link DSB-R100 USB FM radio driver
[   23.234368] initcall dsbr100_init+0x0/0x34 returned 0 after 15 msecs
[   23.240766] calling  si470x_module_init+0x0/0x29
[   23.245399] USB radio driver for Si470x FM Radio Receivers, Version 1.0.8
[   23.252196] bus: 'usb': add driver radio-si470x
[   23.256851] usbcore: registered new interface driver radio-si470x
[   23.262959] initcall si470x_module_init+0x0/0x29 returned 0 after 16 msecs
[   23.269879] calling  scsi_tgt_init+0x0/0x84
[   23.274439] device: 'tgt': device_add
[   23.278171] PM: Adding info for No Bus:tgt
[   23.282379] initcall scsi_tgt_init+0x0/0x84 returned 0 after 7 msecs
[   23.288779] calling  spi_transport_init+0x0/0x2e
[   23.293410] device class 'spi_transport': registering
[   23.298589] device class 'spi_host': registering
[   23.303319] initcall spi_transport_init+0x0/0x2e returned 0 after 9 msecs
[   23.310154] calling  iscsi_transport_init+0x0/0x14d
[   23.315046] Loading iSCSI transport class v2.0-870.
[   23.319938] device class 'iscsi_transport': registering
[   23.325271] device class 'iscsi_endpoint': registering
[   23.330533] device class 'iscsi_host': registering
[   23.335441] device class 'iscsi_connection': registering
[   23.340876] device class 'iscsi_session': registering
[   23.346111] initcall iscsi_transport_init+0x0/0x14d returned 0 after 29 msecs
[   23.353293] calling  sas_transport_init+0x0/0xbb
[   23.357925] device class 'sas_host': registering
[   23.362655] device class 'sas_phy': registering
[   23.367298] device class 'sas_port': registering
[   23.372028] device class 'sas_device': registering
[   23.376930] device class 'sas_end_device': registering
[   23.382179] device class 'sas_expander': registering
[   23.387256] initcall sas_transport_init+0x0/0xbb returned 0 after 27 msecs
[   23.394179] calling  srp_transport_init+0x0/0x3f
[   23.398810] device class 'srp_host': registering
[   23.403538] device class 'srp_remote_ports': registering
[   23.408962] initcall srp_transport_init+0x0/0x3f returned 0 after 9 msecs
[   23.415792] calling  scsi_dh_init+0x0/0x3f
[   23.419911] initcall scsi_dh_init+0x0/0x3f returned 0 after 0 msecs
[   23.426225] calling  rdac_init+0x0/0x2f
[   23.430085] rdac: device handler registered
[   23.434286] initcall rdac_init+0x0/0x2f returned 0 after 4 msecs
[   23.440337] calling  alua_init+0x0/0x36
[   23.444194] alua: device handler registered
[   23.448392] initcall alua_init+0x0/0x36 returned 0 after 4 msecs
[   23.454447] calling  ahc_linux_init+0x0/0x66
[   23.458737] bus: 'pci': add driver aic7xxx
[   23.462993] initcall ahc_linux_init+0x0/0x66 returned 0 after 4 msecs
[   23.472035] calling  init_osst+0x0/0x136
[   23.475974] osst :I: Tape driver with OnStream support version 0.99.4
[   23.475975] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   23.489133] device class 'onstream_tape': registering
[   23.494298] Driver 'osst' needs updating - please use bus_type methods
[   23.500836] bus: 'scsi': add driver osst
[   23.504879] initcall init_osst+0x0/0x136 returned 0 after 27 msecs
[   23.511110] calling  init_sd+0x0/0xf8
[   23.514811] device class 'scsi_disk': registering
[   23.519628] Driver 'sd' needs updating - please use bus_type methods
[   23.525993] bus: 'scsi': add driver sd
[   23.529875] initcall init_sd+0x0/0xf8 returned 0 after 14 msecs
[   23.535842] calling  init_sg+0x0/0x15a
[   23.539609] device class 'scsi_generic': registering
[   23.544737] initcall init_sg+0x0/0x15a returned 0 after 4 msecs
[   23.550706] calling  init_ch_module+0x0/0xaa
[   23.554992] SCSI Media Changer driver v0.25 
[   23.559278] device class 'scsi_changer': registering
[   23.564358] Driver 'ch' needs updating - please use bus_type methods
[   23.570723] bus: 'scsi': add driver ch
[   23.574589] initcall init_ch_module+0x0/0xaa returned 0 after 18 msecs
[   23.581166] calling  ahci_init+0x0/0x1b
[   23.585016] bus: 'pci': add driver ahci
[   23.589009] initcall ahci_init+0x0/0x1b returned 0 after 3 msecs
[   23.595064] calling  piix_init+0x0/0x29
[   23.598917] bus: 'pci': add driver ata_piix
[   23.603146] bus: 'pci': driver_probe_device: matched device 0000:00:1f.1 with driver ata_piix
[   23.611682] bus: 'pci': really_probe: probing driver ata_piix with device 0000:00:1f.1
[   23.619618] ata_piix 0000:00:1f.1: version 2.12
[   23.624175] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   23.631380] ata_piix 0000:00:1f.1: setting latency timer to 64
[   23.637351] scsi0 : ata_piix
[   23.640605] device: 'host0': device_add
[   23.644470] PM: Adding info for No Bus:host0
[   23.648756] device: 'host0': device_add
[   23.652656] PM: Adding info for No Bus:host0
[   23.657133] scsi1 : ata_piix
[   23.660033] device: 'host1': device_add
[   23.663895] PM: Adding info for No Bus:host1
[   23.668182] device: 'host1': device_add
[   23.672078] PM: Adding info for No Bus:host1
[   23.678203] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[   23.685175] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[   23.855329] ata2: port disabled. ignoring.
[   23.859455] driver: '0000:00:1f.1': driver_bound: bound to device 'ata_piix'
[   23.866516] bus: 'pci': really_probe: bound device 0000:00:1f.1 to driver ata_piix
[   23.874100] bus: 'pci': driver_probe_device: matched device 0000:00:1f.2 with driver ata_piix
[   23.882635] bus: 'pci': really_probe: probing driver ata_piix with device 0000:00:1f.2
[   23.890582] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   23.897728] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   23.903101] ata_piix 0000:00:1f.2: setting latency timer to 64
[   23.909037] scsi2 : ata_piix
[   23.911938] device: 'host2': device_add
[   23.915800] PM: Adding info for No Bus:host2
[   23.920087] device: 'host2': device_add
[   23.923983] PM: Adding info for No Bus:host2
[   23.928421] scsi3 : ata_piix
[   23.931322] device: 'host3': device_add
[   23.935184] PM: Adding info for No Bus:host3
[   23.939471] device: 'host3': device_add
[   23.943367] PM: Adding info for No Bus:host3
[   23.948335] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[   23.955480] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[   24.124411] ata3.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
[   24.130698] ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   24.152403] ata3.00: configured for UDMA/133
[   24.328382] ata4.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
[   24.334672] ata4.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   24.341396] ata4.01: ATAPI: PLEXTOR DVDR   PX-755A, 1.03, max UDMA/66
[   24.360404] ata4.00: configured for UDMA/133
[   24.372225] ata4.01: configured for UDMA/66
[   24.376532] isa bounce pool size: 16 pages
[   24.380825] scsi 2:0:0:0: Direct-Access     ATA      HDT722516DLA380  V43O PQ: 0 ANSI: 5
[   24.388928] device: 'target2:0:0': device_add
[   24.393311] PM: Adding info for No Bus:target2:0:0
[   24.398118] device: '2:0:0:0': device_add
[   24.402193] bus: 'scsi': add device 2:0:0:0
[   24.406406] PM: Adding info for scsi:2:0:0:0
[   24.410794] bus: 'scsi': driver_probe_device: matched device 2:0:0:0 with driver osst
[   24.418636] bus: 'scsi': really_probe: probing driver osst with device 2:0:0:0
[   24.425884] bus: 'scsi': driver_probe_device: matched device 2:0:0:0 with driver sd
[   24.433552] bus: 'scsi': really_probe: probing driver sd with device 2:0:0:0
[   24.440649] device: '2:0:0:0': device_add
[   24.444710] PM: Adding info for No Bus:2:0:0:0
[   24.449341] sd 2:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
[   24.456529] sd 2:0:0:0: [sda] Write Protect is off
[   24.461339] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.466484] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.475543] device: 'sda': device_add
[   24.479272] PM: Adding info for No Bus:sda
[   24.483509] sd 2:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB)
[   24.490693] sd 2:0:0:0: [sda] Write Protect is off
[   24.495499] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.500641] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.509702]  sda: sda1 sda2
[   24.549515] device: 'sda1': device_add
[   24.553316] PM: Adding info for No Bus:sda1
[   24.557528] device: 'sda2': device_add
[   24.561322] PM: Adding info for No Bus:sda2
[   24.565869] device: '8:0': device_add
[   24.569572] PM: Adding info for No Bus:8:0
[   24.573819] sd 2:0:0:0: [sda] Attached SCSI disk
[   24.578454] driver: '2:0:0:0': driver_bound: bound to device 'sd'
[   24.584571] bus: 'scsi': really_probe: bound device 2:0:0:0 to driver sd
[   24.591287] device: '2:0:0:0': device_add
[   24.595334] PM: Adding info for No Bus:2:0:0:0
[   24.599954] device: 'sg0': device_add
[   24.603719] PM: Adding info for No Bus:sg0
[   24.607948] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   24.613318] device: '2:0:0:0': device_add
[   24.617381] PM: Adding info for No Bus:2:0:0:0
[   24.622109] scsi 3:0:0:0: Direct-Access     ATA      HDT722516DLA380  V43O PQ: 0 ANSI: 5
[   24.630213] device: 'target3:0:0': device_add
[   24.634596] PM: Adding info for No Bus:target3:0:0
[   24.639403] device: '3:0:0:0': device_add
[   24.643469] bus: 'scsi': add device 3:0:0:0
[   24.647680] PM: Adding info for scsi:3:0:0:0
[   24.652061] bus: 'scsi': driver_probe_device: matched device 3:0:0:0 with driver osst
[   24.659905] bus: 'scsi': really_probe: probing driver osst with device 3:0:0:0
[   24.667155] bus: 'scsi': driver_probe_device: matched device 3:0:0:0 with driver sd
[   24.674823] bus: 'scsi': really_probe: probing driver sd with device 3:0:0:0
[   24.681903] device: '3:0:0:0': device_add
[   24.685965] PM: Adding info for No Bus:3:0:0:0
[   24.690585] sd 3:0:0:0: [sdb] 321672960 512-byte hardware sectors (164697 MB)
[   24.697775] sd 3:0:0:0: [sdb] Write Protect is off
[   24.702581] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   24.707727] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.716787] device: 'sdb': device_add
[   24.720502] PM: Adding info for No Bus:sdb
[   24.724695] sd 3:0:0:0: [sdb] 321672960 512-byte hardware sectors (164697 MB)
[   24.731882] sd 3:0:0:0: [sdb] Write Protect is off
[   24.736690] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   24.741833] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.750893]  sdb: sdb1
[   24.766164] device: 'sdb1': device_add
[   24.769962] PM: Adding info for No Bus:sdb1
[   24.774407] device: '8:16': device_add
[   24.778200] PM: Adding info for No Bus:8:16
[   24.782519] sd 3:0:0:0: [sdb] Attached SCSI disk
[   24.787152] driver: '3:0:0:0': driver_bound: bound to device 'sd'
[   24.793259] bus: 'scsi': really_probe: bound device 3:0:0:0 to driver sd
[   24.799971] device: '3:0:0:0': device_add
[   24.804016] PM: Adding info for No Bus:3:0:0:0
[   24.808587] device: 'sg1': device_add
[   24.812310] PM: Adding info for No Bus:sg1
[   24.816521] sd 3:0:0:0: Attached scsi generic sg1 type 0
[   24.821869] device: '3:0:0:0': device_add
[   24.825927] PM: Adding info for No Bus:3:0:0:0
[   24.831222] scsi 3:0:1:0: CD-ROM            PLEXTOR  DVDR   PX-755A   1.03 PQ: 0 ANSI: 5
[   24.839339] device: 'target3:0:1': device_add
[   24.843721] PM: Adding info for No Bus:target3:0:1
[   24.848531] device: '3:0:1:0': device_add
[   24.852597] bus: 'scsi': add device 3:0:1:0
[   24.856808] PM: Adding info for scsi:3:0:1:0
[   24.861193] bus: 'scsi': driver_probe_device: matched device 3:0:1:0 with driver osst
[   24.869034] bus: 'scsi': really_probe: probing driver osst with device 3:0:1:0
[   24.876282] bus: 'scsi': driver_probe_device: matched device 3:0:1:0 with driver sd
[   24.883949] bus: 'scsi': really_probe: probing driver sd with device 3:0:1:0
[   24.891020] bus: 'scsi': driver_probe_device: matched device 3:0:1:0 with driver ch
[   24.901240] bus: 'scsi': really_probe: probing driver ch with device 3:0:1:0
[   24.908311] device: '3:0:1:0': device_add
[   24.912357] PM: Adding info for No Bus:3:0:1:0
[   24.916946] device: 'sg2': device_add
[   24.920668] PM: Adding info for No Bus:sg2
[   24.924880] scsi 3:0:1:0: Attached scsi generic sg2 type 5
[   24.930387] device: '3:0:1:0': device_add
[   24.934446] PM: Adding info for No Bus:3:0:1:0
[   24.939023] driver: '0000:00:1f.2': driver_bound: bound to device 'ata_piix'
[   24.946083] bus: 'pci': really_probe: bound device 0000:00:1f.2 to driver ata_piix
[   24.953780] initcall piix_init+0x0/0x29 returned 0 after 1292 msecs
[   24.960093] calling  pdc_ata_init+0x0/0x1b
[   24.964212] bus: 'pci': add driver sata_promise
[   24.968906] initcall pdc_ata_init+0x0/0x1b returned 0 after 4 msecs
[   24.975221] calling  qs_ata_init+0x0/0x1b
[   24.979248] bus: 'pci': add driver sata_qstor
[   24.983748] initcall qs_ata_init+0x0/0x1b returned 0 after 4 msecs
[   24.989978] calling  sil_init+0x0/0x1b
[   24.993745] bus: 'pci': add driver sata_sil
[   24.997974] bus: 'pci': driver_probe_device: matched device 0000:05:05.0 with driver sata_sil
[   25.006509] bus: 'pci': really_probe: probing driver sata_sil with device 0000:05:05.0
[   25.014444] sata_sil 0000:05:05.0: version 2.3
[   25.018944] vendor=8086 device=244e
[   25.022450] sata_sil 0000:05:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   25.029614] sata_sil 0000:05:05.0: Applying R_ERR on DMA activate FIS errata fix
[   25.037147] scsi4 : sata_sil
[   25.040052] device: 'host4': device_add
[   25.043915] PM: Adding info for No Bus:host4
[   25.048201] device: 'host4': device_add
[   25.052098] PM: Adding info for No Bus:host4
[   25.056535] scsi5 : sata_sil
[   25.059439] device: 'host5': device_add
[   25.063302] PM: Adding info for No Bus:host5
[   25.067589] device: 'host5': device_add
[   25.071493] PM: Adding info for No Bus:host5
[   25.075953] scsi6 : sata_sil
[   25.078855] device: 'host6': device_add
[   25.082718] PM: Adding info for No Bus:host6
[   25.087004] device: 'host6': device_add
[   25.090900] PM: Adding info for No Bus:host6
[   25.095332] scsi7 : sata_sil
[   25.098237] device: 'host7': device_add
[   25.102103] PM: Adding info for No Bus:host7
[   25.106390] device: 'host7': device_add
[   25.110285] PM: Adding info for No Bus:host7
[   25.114671] ata5: SATA max UDMA/100 mmio m1024@0x5000c800 tf 0x5000c880 irq 17
[   25.121909] ata6: SATA max UDMA/100 mmio m1024@0x5000c800 tf 0x5000c8c0 irq 17
[   25.129143] ata7: SATA max UDMA/100 mmio m1024@0x5000c800 tf 0x5000ca80 irq 17
[   25.136379] ata8: SATA max UDMA/100 mmio m1024@0x5000c800 tf 0x5000cac0 irq 17
[   25.460047] ata5: SATA link down (SStatus 0 SControl 310)
[   25.784046] ata6: SATA link down (SStatus 0 SControl 310)
[   26.108046] ata7: SATA link down (SStatus 0 SControl 310)
[   26.432046] ata8: SATA link down (SStatus 0 SControl 310)
[   26.437483] driver: '0000:05:05.0': driver_bound: bound to device 'sata_sil'
[   26.444550] bus: 'pci': really_probe: bound device 0000:05:05.0 to driver sata_sil
[   26.452234] initcall sil_init+0x0/0x1b returned 0 after 1390 msecs
[   26.458463] calling  sil24_init+0x0/0x1b
[   26.462403] bus: 'pci': add driver sata_sil24
[   26.466904] initcall sil24_init+0x0/0x1b returned 0 after 4 msecs
[   26.473050] calling  svia_init+0x0/0x1b
[   26.476904] bus: 'pci': add driver sata_via
[   26.481233] initcall svia_init+0x0/0x1b returned 0 after 4 msecs
[   26.487289] calling  sis_init+0x0/0x1b
[   26.491055] bus: 'pci': add driver sata_sis
[   26.495392] initcall sis_init+0x0/0x1b returned 0 after 4 msecs
[   26.501362] calling  nv_init+0x0/0x1b
[   26.505038] bus: 'pci': add driver sata_nv
[   26.509284] initcall nv_init+0x0/0x1b returned 0 after 4 msecs
[   26.515163] calling  mv_init+0x0/0x48
[   26.518843] bus: 'pci': add driver sata_mv
[   26.523090] bus: 'platform': add driver sata_mv
[   26.527747] initcall mv_init+0x0/0x48 returned 0 after 8 msecs
[   26.533628] calling  inic_init+0x0/0x1b
[   26.537481] bus: 'pci': add driver sata_inic162x
[   26.542253] initcall inic_init+0x0/0x1b returned 0 after 4 msecs
[   26.548306] calling  adma_ata_init+0x0/0x1b
[   26.552507] bus: 'pci': add driver pdc_adma
[   26.556834] initcall adma_ata_init+0x0/0x1b returned 0 after 4 msecs
[   26.563237] calling  ali_init+0x0/0x1b
[   26.567002] bus: 'pci': add driver pata_ali
[   26.571327] initcall ali_init+0x0/0x1b returned 0 after 4 msecs
[   26.577297] calling  amd_init+0x0/0x1b
[   26.581061] bus: 'pci': add driver pata_amd
[   26.585398] initcall amd_init+0x0/0x1b returned 0 after 4 msecs
[   26.591365] calling  artop_init+0x0/0x1b
[   26.595304] bus: 'pci': add driver pata_artop
[   26.599803] initcall artop_init+0x0/0x1b returned 0 after 4 msecs
[   26.605947] calling  atiixp_init+0x0/0x1b
[   26.609974] bus: 'pci': add driver pata_atiixp
[   26.614559] initcall atiixp_init+0x0/0x1b returned 0 after 4 msecs
[   26.620785] calling  cmd640_init+0x0/0x1b
[   26.624811] bus: 'pci': add driver pata_cmd640
[   26.629400] initcall cmd640_init+0x0/0x1b returned 0 after 4 msecs
[   26.635627] calling  cmd64x_init+0x0/0x1b
[   26.639654] bus: 'pci': add driver pata_cmd64x
[   26.644241] initcall cmd64x_init+0x0/0x1b returned 0 after 4 msecs
[   26.650470] calling  cs5520_init+0x0/0x1b
[   26.654497] bus: 'pci': add driver pata_cs5520
[   26.659090] initcall cs5520_init+0x0/0x1b returned 0 after 4 msecs
[   26.665319] calling  cs5530_init+0x0/0x1b
[   26.669346] bus: 'pci': add driver pata_cs5530
[   26.673933] initcall cs5530_init+0x0/0x1b returned 0 after 4 msecs
[   26.680160] calling  cy82c693_init+0x0/0x1b
[   26.684361] bus: 'pci': add driver pata_cypress
[   26.689034] initcall cy82c693_init+0x0/0x1b returned 0 after 4 msecs
[   26.695436] calling  efar_init+0x0/0x1b
[   26.699290] bus: 'pci': add driver pata_efar
[   26.703705] initcall efar_init+0x0/0x1b returned 0 after 4 msecs
[   26.709761] calling  hpt36x_init+0x0/0x1b
[   26.713788] bus: 'pci': add driver pata_hpt366
[   26.718375] initcall hpt36x_init+0x0/0x1b returned 0 after 4 msecs
[   26.724602] calling  hpt3x2n_init+0x0/0x1b
[   26.728716] bus: 'pci': add driver pata_hpt3x2n
[   26.733404] initcall hpt3x2n_init+0x0/0x1b returned 0 after 4 msecs
[   26.739716] calling  it821x_init+0x0/0x1b
[   26.743745] bus: 'pci': add driver pata_it821x
[   26.748355] initcall it821x_init+0x0/0x1b returned 0 after 4 msecs
[   26.754584] calling  it8213_init+0x0/0x1b
[   26.758612] bus: 'pci': add driver pata_it8213
[   26.763206] initcall it8213_init+0x0/0x1b returned 0 after 4 msecs
[   26.769436] calling  ninja32_init+0x0/0x1b
[   26.773549] bus: 'pci': add driver pata_ninja32
[   26.778223] initcall ninja32_init+0x0/0x1b returned 0 after 4 msecs
[   26.784535] calling  ns87410_init+0x0/0x1b
[   26.788648] bus: 'pci': add driver pata_ns87410
[   26.793325] initcall ns87410_init+0x0/0x1b returned 0 after 4 msecs
[   26.799639] calling  ns87415_init+0x0/0x1b
[   26.803752] bus: 'pci': add driver pata_ns87415
[   26.808425] initcall ns87415_init+0x0/0x1b returned 0 after 4 msecs
[   26.814740] calling  marvell_init+0x0/0x1b
[   26.818856] bus: 'pci': add driver pata_marvell
[   26.823538] initcall marvell_init+0x0/0x1b returned 0 after 4 msecs
[   26.829853] calling  oldpiix_init+0x0/0x1b
[   26.833966] bus: 'pci': add driver pata_oldpiix
[   26.838639] initcall oldpiix_init+0x0/0x1b returned 0 after 4 msecs
[   26.844952] calling  pdc2027x_init+0x0/0x1b
[   26.849153] bus: 'pci': add driver pata_pdc2027x
[   26.853912] initcall pdc2027x_init+0x0/0x1b returned 0 after 4 msecs
[   26.860312] calling  pdc202xx_init+0x0/0x1b
[   26.864513] bus: 'pci': add driver pata_pdc202xx_old
[   26.869619] initcall pdc202xx_init+0x0/0x1b returned 0 after 4 msecs
[   26.876019] calling  rz1000_init+0x0/0x1b
[   26.880047] bus: 'pci': add driver pata_rz1000
[   26.884643] initcall rz1000_init+0x0/0x1b returned 0 after 4 msecs
[   26.890872] calling  sc1200_init+0x0/0x1b
[   26.894900] bus: 'pci': add driver sc1200
[   26.899059] initcall sc1200_init+0x0/0x1b returned 0 after 3 msecs
[   26.905286] calling  serverworks_init+0x0/0x1b
[   26.909747] bus: 'pci': add driver pata_serverworks
[   26.914768] initcall serverworks_init+0x0/0x1b returned 0 after 4 msecs
[   26.921430] calling  via_init+0x0/0x1b
[   26.925195] bus: 'pci': add driver pata_via
[   26.929522] initcall via_init+0x0/0x1b returned 0 after 4 msecs
[   26.935490] calling  sl82c105_init+0x0/0x1b
[   26.939689] bus: 'pci': add driver pata_sl82c105
[   26.944450] initcall sl82c105_init+0x0/0x1b returned 0 after 4 msecs
[   26.950852] calling  sis_init+0x0/0x1b
[   26.954620] bus: 'pci': add driver pata_sis
[   26.958947] initcall sis_init+0x0/0x1b returned 0 after 4 msecs
[   26.964914] calling  sch_init+0x0/0x1b
[   26.968682] bus: 'pci': add driver pata_sch
[   26.973014] initcall sch_init+0x0/0x1b returned 0 after 4 msecs
[   26.978983] calling  i2o_iop_init+0x0/0x48
[   26.983095] I2O subsystem v1.325
[   26.986340] i2o: max drivers = 8
[   26.989695] bus: 'i2o': registered
[   26.993236] bus: 'i2o': add driver exec-osm
[   26.997547] bus: 'pci': add driver PCI_I2O
[   27.001788] initcall i2o_iop_init+0x0/0x48 returned 0 after 17 msecs
[   27.008189] calling  i2o_config_init+0x0/0xa4
[   27.015115] I2O Configuration OSM v1.323
[   27.019054] bus: 'i2o': add driver config-osm
[   27.023528] device: 'i2octl': device_add
[   27.027520] PM: Adding info for No Bus:i2octl
[   27.031989] initcall i2o_config_init+0x0/0xa4 returned 0 after 16 msecs
[   27.038654] calling  i2o_bus_init+0x0/0x44
[   27.042765] I2O Bus Adapter OSM v1.317
[   27.046531] bus: 'i2o': add driver bus-osm
[   27.050742] initcall i2o_bus_init+0x0/0x44 returned 0 after 7 msecs
[   27.057054] calling  i2o_scsi_init+0x0/0x44
[   27.061255] I2O SCSI Peripheral OSM v1.316
[   27.065367] bus: 'i2o': add driver scsi-osm
[   27.069662] initcall i2o_scsi_init+0x0/0x44 returned 0 after 8 msecs
[   27.076063] calling  i2o_proc_init+0x0/0x193
[   27.080348] I2O ProcFS OSM v1.316
[   27.083680] bus: 'i2o': add driver proc-osm
[   27.087987] initcall i2o_proc_init+0x0/0x193 returned 0 after 7 msecs
[   27.094476] calling  fw_core_init+0x0/0xb1
[   27.098694] bus: 'firewire': registered
[   27.102566] initcall fw_core_init+0x0/0xb1 returned 0 after 3 msecs
[   27.108877] calling  fw_ohci_init+0x0/0x1b
[   27.112991] bus: 'pci': add driver firewire_ohci
[   27.117655] bus: 'pci': driver_probe_device: matched device 0000:05:04.0 with driver firewire_ohci
[   27.126622] bus: 'pci': really_probe: probing driver firewire_ohci with device 0000:05:04.0
[   27.135004] vendor=8086 device=244e
[   27.138510] firewire_ohci 0000:05:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   27.216037] firewire_ohci: Added fw-ohci device 0000:05:04.0, OHCI version 1.10
[   27.223403] driver: '0000:05:04.0': driver_bound: bound to device 'firewire_ohci'
[   27.230900] bus: 'pci': really_probe: bound device 0000:05:04.0 to driver firewire_ohci
[   27.239023] initcall fw_ohci_init+0x0/0x1b returned 0 after 120 msecs
[   27.245512] calling  sbp2_init+0x0/0x44
[   27.249419] bus: 'firewire': add driver sbp2
[   27.253806] initcall sbp2_init+0x0/0x44 returned 0 after 4 msecs
[   27.259858] calling  ieee1394_init+0x0/0x26c
[   27.264305] bus: 'ieee1394': registered
[   27.268164] device class 'ieee1394_host': registering
[   27.273336] device class 'ieee1394_protocol': registering
[   27.278878] device class 'ieee1394_node': registering
[   27.284052] device class 'ieee1394': registering
[   27.288779] bus: 'ieee1394': add driver nodemgr
[   27.293428] initcall ieee1394_init+0x0/0x26c returned 0 after 27 msecs
[   27.300000] calling  pcilynx_init+0x0/0x3c
[   27.304115] bus: 'pci': add driver pcilynx
[   27.308371] initcall pcilynx_init+0x0/0x3c returned 0 after 4 msecs
[   27.314685] calling  ohci1394_init+0x0/0x1b
[   27.318886] bus: 'pci': add driver ohci1394
[   27.323212] initcall ohci1394_init+0x0/0x1b returned 0 after 4 msecs
[   27.329615] calling  video1394_init_module+0x0/0xd6
[   27.334510] bus: 'ieee1394': add driver video1394
[   27.339333] video1394: Installed video1394 module
[   27.344053] initcall video1394_init_module+0x0/0xd6 returned 0 after 9 msecs
[   27.351149] calling  sbp2_module_init+0x0/0x77
[   27.355609] bus: 'ieee1394': add driver sbp2
[   27.359998] initcall sbp2_module_init+0x0/0x77 returned 0 after 4 msecs
[   27.366661] calling  dv1394_init_module+0x0/0xad
[   27.371294] NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
[   27.381909] bus: 'ieee1394': add driver dv1394
[   27.386472] initcall dv1394_init_module+0x0/0xad returned 0 after 14 msecs
[   27.393397] calling  ether1394_init_module+0x0/0x70
[   27.398485] bus: 'ieee1394': add driver eth1394
[   27.403156] initcall ether1394_init_module+0x0/0x70 returned 0 after 4 msecs
[   27.410251] calling  cdrom_init+0x0/0xd
[   27.414111] initcall cdrom_init+0x0/0xd returned 0 after 0 msecs
[   27.420162] calling  at25_init+0x0/0x12
[   27.424015] bus: 'spi': add driver at25
[   27.427967] initcall at25_init+0x0/0x12 returned 0 after 3 msecs
[   27.434021] calling  spidev_init+0x0/0x9a
[   27.438050] device class 'spidev': registering
[   27.442604] bus: 'spi': add driver spidev
[   27.446733] initcall spidev_init+0x0/0x9a returned 0 after 8 msecs
[   27.452959] calling  aoe_init+0x0/0xa7
[   27.456728] device class 'aoe': registering
[   27.461024] device: 'err': device_add
[   27.464740] PM: Adding info for No Bus:err
[   27.468962] device: 'discover': device_add
[   27.473110] PM: Adding info for No Bus:discover
[   27.477755] device: 'interfaces': device_add
[   27.482075] PM: Adding info for No Bus:interfaces
[   27.486886] device: 'revalidate': device_add
[   27.491199] PM: Adding info for No Bus:revalidate
[   27.496010] device: 'flush': device_add
[   27.499889] PM: Adding info for No Bus:flush
[   27.504423] aoe: AoE v47 initialised.
[   27.508181] initcall aoe_init+0x0/0xa7 returned 0 after 49 msecs
[   27.514236] calling  mon_init+0x0/0x115
[   27.518098] device class 'usbmon': registering
[   27.522669] device: 'usbmon0': device_add
[   27.526727] PM: Adding info for No Bus:usbmon0
[   27.531303] device: 'usbmon5': device_add
[   27.535368] PM: Adding info for No Bus:usbmon5
[   27.539965] device: 'usbmon4': device_add
[   27.544037] PM: Adding info for No Bus:usbmon4
[   27.548609] device: 'usbmon3': device_add
[   27.552684] PM: Adding info for No Bus:usbmon3
[   27.557256] device: 'usbmon2': device_add
[   27.561320] PM: Adding info for No Bus:usbmon2
[   27.565892] device: 'usbmon1': device_add
[   27.569962] PM: Adding info for No Bus:usbmon1
[   27.574519] initcall mon_init+0x0/0x115 returned 0 after 53 msecs
[   27.580660] calling  isp116x_init+0x0/0x3e
[   27.584772] 116x: driver isp116x-hcd, 03 Nov 2005
[   27.589492] bus: 'platform': add driver isp116x-hcd
[   27.594490] initcall isp116x_init+0x0/0x3e returned 0 after 9 msecs
[   27.600803] calling  sl811h_init+0x0/0x3e
[   27.604830] sl811: driver sl811-hcd, 19 May 2005
[   27.609461] bus: 'platform': add driver sl811-hcd
[   27.614285] initcall sl811h_init+0x0/0x3e returned 0 after 9 msecs
[   27.620512] calling  r8a66597_init+0x0/0x3e
[   27.624713] r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
[   27.630210] bus: 'platform': add driver r8a66597_hcd
[   27.635294] initcall r8a66597_init+0x0/0x3e returned 0 after 10 msecs
[   27.641783] calling  isp1760_init+0x0/0x34
[   27.646203] bus: 'pci': add driver isp1760
[   27.650448] initcall isp1760_init+0x0/0x34 returned 0 after 4 msecs
[   27.656760] calling  c67x00_init+0x0/0x12
[   27.660787] bus: 'platform': add driver c67x00
[   27.665360] initcall c67x00_init+0x0/0x12 returned 0 after 4 msecs
[   27.671586] calling  acm_init+0x0/0xfd
[   27.675362] bus: 'usb': add driver cdc_acm
[   27.679595] usbcore: registered new interface driver cdc_acm
[   27.685270] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[   27.693804] initcall acm_init+0x0/0xfd returned 0 after 17 msecs
[   27.699857] calling  usblp_init+0x0/0x1b
[   27.703799] bus: 'usb': add driver usblp
[   27.707845] usbcore: registered new interface driver usblp
[   27.713347] initcall usblp_init+0x0/0x1b returned 0 after 9 msecs
[   27.719484] calling  wdm_init+0x0/0x1b
[   27.723256] bus: 'usb': add driver cdc_wdm
[   27.727478] device: 'fw0': device_add
[   27.731191] bus: 'firewire': add device fw0
[   27.735409] PM: Adding info for firewire:fw0
[   27.739816] usbcore: registered new interface driver cdc_wdm
[   27.745493] initcall wdm_init+0x0/0x1b returned 0 after 21 msecs
[   27.751548] calling  usb_stor_init+0x0/0x50
[   27.755745] Initializing USB Mass Storage driver...
[   27.760638] bus: 'usb': add driver usb-storage
[   27.765148] firewire_core: created device fw0: GUID 0090270001ab6fc2, S400
[   27.765220] usbcore: registered new interface driver usb-storage
[   27.765224] USB Mass Storage support registered.
[   27.765227] initcall usb_stor_init+0x0/0x50 returned 0 after 9 msecs
[   27.765230] calling  usb_usual_init+0x0/0x40
[   27.765237] bus: 'usb': add driver libusual
[   27.765353] usbcore: registered new interface driver libusual
[   27.765357] initcall usb_usual_init+0x0/0x40 returned 0 after 0 msecs
[   27.765360] calling  usb_mdc800_init+0x0/0x267
[   27.765369] bus: 'usb': add driver mdc800
[   27.765483] usbcore: registered new interface driver mdc800
[   27.765487] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[   27.765489] initcall usb_mdc800_init+0x0/0x267 returned 0 after 0 msecs
[   27.765491] calling  usb_serial_init+0x0/0x235
[   27.765598] bus: 'usb-serial': registered
[   27.765613] bus: 'usb': add driver usbserial
[   27.765724] usbcore: registered new interface driver usbserial
[   27.765727] bus: 'usb-serial': add driver generic
[   27.765850] usbserial: USB Serial support registered for generic
[   27.765852] bus: 'usb': add driver usbserial_generic
[   27.765958] usbcore: registered new interface driver usbserial_generic
[   27.765959] usbserial: USB Serial Driver core
[   27.765961] initcall usb_serial_init+0x0/0x235 returned 0 after 0 msecs
[   27.765964] calling  aircable_init+0x0/0x46
[   27.765966] bus: 'usb-serial': add driver aircable
[   27.766070] usbserial: USB Serial support registered for aircable
[   27.766072] bus: 'usb': add driver aircable
[   27.766191] usbcore: registered new interface driver aircable
[   27.766194] initcall aircable_init+0x0/0x46 returned 0 after 0 msecs
[   27.766196] calling  ark3116_init+0x0/0x48
[   27.766198] bus: 'usb-serial': add driver ark3116
[   27.766300] usbserial: USB Serial support registered for ark3116
[   27.766302] bus: 'usb': add driver ark3116
[   27.766416] usbcore: registered new interface driver ark3116
[   27.766418] initcall ark3116_init+0x0/0x48 returned 0 after 0 msecs
[   27.766421] calling  belkin_sa_init+0x0/0x58
[   27.766423] bus: 'usb-serial': add driver belkin
[   27.766532] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[   27.766535] bus: 'usb': add driver belkin
[   27.766640] usbcore: registered new interface driver belkin
[   27.766642] belkin_sa: USB Belkin Serial converter driver v1.2
[   27.766644] initcall belkin_sa_init+0x0/0x58 returned 0 after 0 msecs
[   27.766646] calling  ch341_init+0x0/0x48
[   27.766648] bus: 'usb-serial': add driver ch341-uart
[   27.766754] usbserial: USB Serial support registered for ch341-uart
[   27.766756] bus: 'usb': add driver ch341
[   27.766877] usbcore: registered new interface driver ch341
[   27.766879] initcall ch341_init+0x0/0x48 returned 0 after 0 msecs
[   27.766881] calling  cp2101_init+0x0/0x58
[   27.766883] bus: 'usb-serial': add driver cp2101
[   27.766980] usbserial: USB Serial support registered for cp2101
[   27.766982] bus: 'usb': add driver cp2101
[   27.767088] usbcore: registered new interface driver cp2101
[   27.767089] cp2101: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07
[   27.767092] initcall cp2101_init+0x0/0x58 returned 0 after 0 msecs
[   27.767094] calling  cyberjack_init+0x0/0x66
[   27.767096] bus: 'usb-serial': add driver cyberjack
[   27.767207] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[   27.767209] bus: 'usb': add driver cyberjack
[   27.767326] usbcore: registered new interface driver cyberjack
[   27.767327] cyberjack: v1.01 Matthias Bruestle
[   27.767328] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
[   27.767331] initcall cyberjack_init+0x0/0x66 returned 0 after 0 msecs
[   27.767333] calling  cypress_init+0x0/0xb9
[   27.767334] drivers/usb/serial/cypress_m8.c: cypress_init
[   27.767336] bus: 'usb-serial': add driver earthmate
[   27.767449] usbserial: USB Serial support registered for DeLorme Earthmate USB
[   27.767451] bus: 'usb-serial': add driver cyphidcom
[   27.767565] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[   27.767567] bus: 'usb-serial': add driver nokiaca42v2
[   27.767664] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[   27.767667] bus: 'usb': add driver cypress
[   27.767780] usbcore: registered new interface driver cypress
[   27.767781] cypress_m8: Cypress USB to Serial Driver v1.09
[   27.767783] initcall cypress_init+0x0/0xb9 returned 0 after 0 msecs
[   27.767785] calling  debug_init+0x0/0x48
[   27.767787] bus: 'usb-serial': add driver debug
[   27.767898] usbserial: USB Serial support registered for debug
[   27.767900] bus: 'usb': add driver debug
[   27.768014] usbcore: registered new interface driver debug
[   27.768016] initcall debug_init+0x0/0x48 returned 0 after 0 msecs
[   27.768018] calling  digi_init+0x0/0x76
[   27.768020] bus: 'usb-serial': add driver digi_2
[   27.768117] usbserial: USB Serial support registered for Digi 2 port USB adapter
[   27.768119] bus: 'usb-serial': add driver digi_4
[   27.768229] usbserial: USB Serial support registered for Digi 4 port USB adapter
[   27.768232] bus: 'usb': add driver digi_acceleport
[   27.768339] usbcore: registered new interface driver digi_acceleport
[   27.768340] digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
[   27.768343] initcall digi_init+0x0/0x76 returned 0 after 0 msecs
[   27.768345] calling  edgeport_init+0x0/0xc1
[   27.768347] bus: 'usb-serial': add driver edgeport_2
[   27.768443] usbserial: USB Serial support registered for Edgeport 2 port adapter
[   27.768446] bus: 'usb-serial': add driver edgeport_4
[   27.768566] usbserial: USB Serial support registered for Edgeport 4 port adapter
[   27.768569] bus: 'usb-serial': add driver edgeport_8
[   27.768671] usbserial: USB Serial support registered for Edgeport 8 port adapter
[   27.768674] bus: 'usb-serial': add driver epic
[   27.768770] usbserial: USB Serial support registered for EPiC device
[   27.768772] bus: 'usb': add driver io_edgeport
[   27.768892] usbcore: registered new interface driver io_edgeport
[   27.768893] io_edgeport: Edgeport USB Serial Driver v2.7
[   27.768895] initcall edgeport_init+0x0/0xc1 returned 0 after 0 msecs
[   27.768898] calling  edgeport_init+0x0/0x77
[   27.768900] bus: 'usb-serial': add driver edgeport_ti_1
[   27.768998] usbserial: USB Serial support registered for Edgeport TI 1 port adapter
[   27.769001] bus: 'usb-serial': add driver edgeport_ti_2
[   27.769112] usbserial: USB Serial support registered for Edgeport TI 2 port adapter
[   27.769114] bus: 'usb': add driver io_ti
[   27.769247] usbcore: registered new interface driver io_ti
[   27.769249] io_ti: Edgeport USB Serial Driver v0.7mode043006
[   27.769251] initcall edgeport_init+0x0/0x77 returned 0 after 0 msecs
[   27.769253] calling  ftdi_init+0x0/0xce
[   27.769255] bus: 'usb-serial': add driver ftdi_sio
[   27.769369] usbserial: USB Serial support registered for FTDI USB Serial Device
[   27.769371] bus: 'usb': add driver ftdi_sio
[   27.769482] usbcore: registered new interface driver ftdi_sio
[   27.769483] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
[   27.769485] initcall ftdi_init+0x0/0xce returned 0 after 0 msecs
[   27.769488] calling  funsoft_init+0x0/0x48
[   27.769490] bus: 'usb-serial': add driver funsoft
[   27.769600] usbserial: USB Serial support registered for funsoft
[   27.769602] bus: 'usb': add driver funsoft
[   27.769710] usbcore: registered new interface driver funsoft
[   27.769712] initcall funsoft_init+0x0/0x48 returned 0 after 0 msecs
[   27.769714] calling  garmin_init+0x0/0x58
[   27.769716] bus: 'usb-serial': add driver garmin_gps
[   27.769820] usbserial: USB Serial support registered for Garmin GPS usb/tty
[   27.769823] bus: 'usb': add driver garmin_gps
[   27.769950] usbcore: registered new interface driver garmin_gps
[   27.769952] garmin_gps: garmin gps driver v0.31
[   27.769954] initcall garmin_init+0x0/0x58 returned 0 after 0 msecs
[   27.769956] calling  ipaq_init+0x0/0x91
[   27.769958] bus: 'usb-serial': add driver ipaq
[   27.770064] usbserial: USB Serial support registered for PocketPC PDA
[   27.770066] ipaq: USB PocketPC PDA driver v0.5
[   27.770068] bus: 'usb': add driver ipaq
[   27.770178] usbcore: registered new interface driver ipaq
[   27.770181] initcall ipaq_init+0x0/0x91 returned 0 after 0 msecs
[   27.770184] calling  usb_ipw_init+0x0/0x5d
[   27.770186] bus: 'usb-serial': add driver ipw
[   27.770298] usbserial: USB Serial support registered for IPWireless converter
[   27.770300] bus: 'usb': add driver ipwtty
[   27.770408] usbcore: registered new interface driver ipwtty
[   27.770409] ipw: IPWireless tty driver v0.3
[   27.770411] initcall usb_ipw_init+0x0/0x5d returned 0 after 0 msecs
[   27.770413] calling  ir_init+0x0/0x58
[   27.770415] bus: 'usb-serial': add driver ir-usb
[   27.770512] usbserial: USB Serial support registered for IR Dongle
[   27.770515] bus: 'usb': add driver ir-usb
[   27.770640] usbcore: registered new interface driver ir-usb
[   27.770641] ir_usb: USB IR Dongle driver v0.4
[   27.770643] initcall ir_init+0x0/0x58 returned 0 after 0 msecs
[   27.770645] calling  iuu_init+0x0/0x58
[   27.770647] bus: 'usb-serial': add driver iuu_phoenix
[   27.770744] usbserial: USB Serial support registered for iuu_phoenix
[   27.770747] bus: 'usb': add driver iuu_phoenix
[   27.770854] usbcore: registered new interface driver iuu_phoenix
[   27.770856] iuu_phoenix: Infinity USB Unlimited Phoenix driver v0.5
[   27.770858] initcall iuu_init+0x0/0x58 returned 0 after 0 msecs
[   27.770860] calling  kobil_init+0x0/0x66
[   27.770862] bus: 'usb-serial': add driver kobil
[   27.770974] usbserial: USB Serial support registered for KOBIL USB smart card terminal
[   27.770977] bus: 'usb': add driver kobil
[   27.771082] usbcore: registered new interface driver kobil
[   27.771083] kobil_sct: 21/05/2004 KOBIL Systems GmbH - http://www.kobil.com
[   27.771085] kobil_sct: KOBIL USB Smart Card Terminal Driver (experimental)
[   27.771087] initcall kobil_init+0x0/0x66 returned 0 after 0 msecs
[   27.771089] calling  moschip7840_init+0x0/0xcb
[   27.771091] bus: 'usb-serial': add driver mos7840
[   27.771195] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[   27.771197] mos7840: Moschip 7840/7820 USB Serial Driver 1.3.1
[   27.771199] bus: 'usb': add driver mos7840
[   27.771318] usbcore: registered new interface driver mos7840
[   27.771320] initcall moschip7840_init+0x0/0xcb returned 0 after 0 msecs
[   27.771322] calling  moto_init+0x0/0x48
[   27.771325] bus: 'usb-serial': add driver moto-modem
[   27.771442] usbserial: USB Serial support registered for moto-modem
[   27.771445] bus: 'usb': add driver moto-modem
[   27.771550] usbcore: registered new interface driver moto-modem
[   27.771552] initcall moto_init+0x0/0x48 returned 0 after 0 msecs
[   27.771555] calling  navman_init+0x0/0x48
[   27.771557] bus: 'usb-serial': add driver navman
[   27.771667] usbserial: USB Serial support registered for navman
[   27.771670] bus: 'usb': add driver navman
[   27.771775] usbcore: registered new interface driver navman
[   27.771777] initcall navman_init+0x0/0x48 returned 0 after 0 msecs
[   27.771779] calling  omninet_init+0x0/0x59
[   27.771781] bus: 'usb-serial': add driver omninet
[   27.771884] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
[   27.771887] bus: 'usb': add driver omninet
[   27.772009] usbcore: registered new interface driver omninet
[   27.772011] omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
[   27.772013] initcall omninet_init+0x0/0x59 returned 0 after 0 msecs
[   27.772015] calling  option_init+0x0/0x58
[   27.772017] bus: 'usb-serial': add driver option1
[   27.772122] usbserial: USB Serial support registered for GSM modem (1-port)
[   27.772124] bus: 'usb': add driver option
[   27.772249] usbcore: registered new interface driver option
[   27.772250] option: USB Driver for GSM modems: v0.7.2
[   27.772252] initcall option_init+0x0/0x58 returned 0 after 0 msecs
[   27.772255] calling  pl2303_init+0x0/0x59
[   27.772257] bus: 'usb-serial': add driver pl2303
[   27.772368] usbserial: USB Serial support registered for pl2303
[   27.772370] bus: 'usb': add driver pl2303
[   27.772478] usbcore: registered new interface driver pl2303
[   27.772479] pl2303: Prolific PL2303 USB to serial adaptor driver
[   27.772481] initcall pl2303_init+0x0/0x59 returned 0 after 0 msecs
[   27.772483] calling  sierra_init+0x0/0x58
[   27.772485] bus: 'usb-serial': add driver sierra
[   27.772597] usbserial: USB Serial support registered for Sierra USB modem
[   27.772600] bus: 'usb': add driver sierra
[   27.772719] usbcore: registered new interface driver sierra
[   27.772721] sierra: USB Driver for Sierra Wireless USB modems: v.1.2.13a
[   27.772723] initcall sierra_init+0x0/0x58 returned 0 after 0 msecs
[   27.772725] calling  visor_init+0x0/0x1a5
[   27.772727] bus: 'usb-serial': add driver visor
[   27.772825] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[   27.772828] bus: 'usb-serial': add driver clie_3.5
[   27.772925] usbserial: USB Serial support registered for Sony Clie 3.5
[   27.772927] bus: 'usb-serial': add driver clie_5
[   27.773040] usbserial: USB Serial support registered for Sony Clie 5.0
[   27.773043] bus: 'usb': add driver visor
[   27.773150] usbcore: registered new interface driver visor
[   27.773152] visor: USB HandSpring Visor / Palm OS driver
[   27.773154] initcall visor_init+0x0/0x1a5 returned 0 after 0 msecs
[   27.773156] calling  whiteheat_init+0x0/0x77
[   27.773158] bus: 'usb-serial': add driver whiteheatnofirm
[   27.773263] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[   27.773266] bus: 'usb-serial': add driver whiteheat
[   27.773386] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[   27.773389] bus: 'usb': add driver whiteheat
[   27.773504] usbcore: registered new interface driver whiteheat
[   27.773506] whiteheat: USB ConnectTech WhiteHEAT driver v2.0
[   27.773508] initcall whiteheat_init+0x0/0x77 returned 0 after 0 msecs
[   27.773510] calling  keyspan_pda_init+0x0/0x76
[   27.773512] bus: 'usb-serial': add driver keyspan_pda
[   27.773612] usbserial: USB Serial support registered for Keyspan PDA
[   27.773614] bus: 'usb-serial': add driver xircom_no_firm
[   27.773727] usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[   27.773730] bus: 'usb': add driver keyspan_pda
[   27.773843] usbcore: registered new interface driver keyspan_pda
[   27.773844] keyspan_pda: USB Keyspan PDA Converter driver v1.1
[   27.773846] initcall keyspan_pda_init+0x0/0x76 returned 0 after 0 msecs
[   27.773849] calling  appledisplay_init+0x0/0x57
[   27.925401] bus: 'usb': add driver appledisplay
[   27.925524] usbcore: registered new interface driver appledisplay
[   27.925529] initcall appledisplay_init+0x0/0x57 returned 0 after 144 msecs
[   27.925532] calling  berry_init+0x0/0x1b
[   27.925534] bus: 'usb': add driver berry_charge
[   27.925640] usbcore: registered new interface driver berry_charge
[   27.925644] initcall berry_init+0x0/0x1b returned 0 after 0 msecs
[   27.925647] calling  cypress_init+0x0/0x3a
[   27.925649] bus: 'usb': add driver cypress_cy7c63
[   27.925755] usbcore: registered new interface driver cypress_cy7c63
[   27.925759] initcall cypress_init+0x0/0x3a returned 0 after 0 msecs
[   27.925762] calling  emi26_init+0x0/0x1b
[   27.925764] bus: 'usb': add driver emi26 - firmware loader
[   27.925886] usbcore: registered new interface driver emi26 - firmware loader
[   27.925890] initcall emi26_init+0x0/0x1b returned 0 after 0 msecs
[   27.925892] calling  emi62_init+0x0/0x38
[   27.925895] bus: 'usb': add driver emi62 - firmware loader
[   27.926003] usbcore: registered new interface driver emi62 - firmware loader
[   27.926014] initcall emi62_init+0x0/0x38 returned 0 after 0 msecs
[   27.926016] calling  usb_idmouse_init+0x0/0x48
[   27.926017] idmouse: Siemens ID Mouse FingerTIP Sensor Driver 0.6
[   27.926019] bus: 'usb': add driver idmouse
[   27.926125] usbcore: registered new interface driver idmouse
[   27.926129] initcall usb_idmouse_init+0x0/0x48 returned 0 after 0 msecs
[   27.926132] calling  iowarrior_init+0x0/0x1b
[   27.926134] bus: 'usb': add driver iowarrior
[   27.926269] usbcore: registered new interface driver iowarrior
[   27.926274] initcall iowarrior_init+0x0/0x1b returned 0 after 0 msecs
[   27.926276] calling  isight_firmware_init+0x0/0x1b
[   27.926278] bus: 'usb': add driver isight_firmware
[   27.926385] usbcore: registered new interface driver isight_firmware
[   27.926390] initcall isight_firmware_init+0x0/0x1b returned 0 after 0 msecs
[   27.926392] calling  usb_lcd_init+0x0/0x3a
[   27.926395] bus: 'usb': add driver usblcd
[   27.926505] usbcore: registered new interface driver usblcd
[   27.926509] initcall usb_lcd_init+0x0/0x3a returned 0 after 0 msecs
[   27.926512] calling  ld_usb_init+0x0/0x3a
[   27.926514] bus: 'usb': add driver ldusb
[   27.926642] usbcore: registered new interface driver ldusb
[   27.926647] initcall ld_usb_init+0x0/0x3a returned 0 after 0 msecs
[   27.926649] calling  usb_led_init+0x0/0x3a
[   27.926651] bus: 'usb': add driver usbled
[   27.926771] usbcore: registered new interface driver usbled
[   27.926775] initcall usb_led_init+0x0/0x3a returned 0 after 0 msecs
[   27.926778] calling  usb_rio_init+0x0/0x38
[   27.926780] bus: 'usb': add driver rio500
[   27.926891] usbcore: registered new interface driver rio500
[   27.926895] rio500: v1.1:USB Rio 500 driver
[   27.926897] initcall usb_rio_init+0x0/0x38 returned 0 after 0 msecs
[   27.926899] calling  tv_init+0x0/0x4a
[   27.926901] bus: 'usb': add driver trancevibrator
[   27.927019] usbcore: registered new interface driver trancevibrator
[   27.927023] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
[   27.927025] initcall tv_init+0x0/0x4a returned 0 after 0 msecs
[   27.927027] calling  usb_sisusb_init+0x0/0x1b
[   27.927030] bus: 'usb': add driver sisusb
[   27.927149] usbcore: registered new interface driver sisusb
[   27.927154] initcall usb_sisusb_init+0x0/0x1b returned 0 after 0 msecs
[   27.927156] calling  i8042_init+0x0/0x396
[   27.927158] pnp: the driver 'i8042 kbd' has been registered
[   27.927161] bus: 'pnp': add driver i8042 kbd
[   27.927184] bus: 'pnp': driver_probe_device: matched device 00:0a with driver i8042 kbd
[   27.927186] bus: 'pnp': really_probe: probing driver i8042 kbd with device 00:0a
[   27.927197] i8042 kbd 00:0a: driver attached
[   27.927198] driver: '00:0a': driver_bound: bound to device 'i8042 kbd'
[   27.927200] bus: 'pnp': really_probe: bound device 00:0a to driver i8042 kbd
[   27.927304] pnp: the driver 'i8042 aux' has been registered
[   27.927306] bus: 'pnp': add driver i8042 aux
[   27.927333] bus: 'pnp': driver_probe_device: matched device 00:09 with driver i8042 aux
[   27.927335] bus: 'pnp': really_probe: probing driver i8042 aux with device 00:09
[   27.927344] i8042 aux 00:09: driver attached
[   27.927345] driver: '00:09': driver_bound: bound to device 'i8042 aux'
[   27.927347] bus: 'pnp': really_probe: bound device 00:09 to driver i8042 aux
[   27.927459] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   27.927498] bus: 'platform': add driver i8042
[   27.927605] Registering platform device 'i8042'. Parent at platform
[   27.927607] device: 'i8042': device_add
[   27.927617] bus: 'platform': add device i8042
[   27.927632] PM: Adding info for platform:i8042
[   27.927727] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[   27.927729] bus: 'platform': really_probe: probing driver i8042 with device i8042
[   28.177752] serio: i8042 KBD port at 0x60,0x64 irq 1
[   28.177758] driver: 'i8042': driver_bound: bound to device 'i8042'
[   28.177760] bus: 'platform': really_probe: bound device i8042 to driver i8042
[   28.177764] initcall i8042_init+0x0/0x396 returned 0 after 238 msecs
[   28.177767] calling  serport_init+0x0/0x34
[   28.177769] initcall serport_init+0x0/0x34 returned 0 after 0 msecs
[   28.177772] calling  ct82c710_init+0x0/0x17f
[   28.177797] initcall ct82c710_init+0x0/0x17f returned -19 after 0 msecs
[   28.177799] calling  pcips2_init+0x0/0x1b
[   28.177813] bus: 'pci': add driver pcips2
[   28.177887] device: 'serio0': device_add
[   28.177894] bus: 'serio': add device serio0
[   28.177919] PM: Adding info for serio:serio0
[   28.178070] initcall pcips2_init+0x0/0x1b returned 0 after 0 msecs
[   28.178073] calling  serio_raw_init+0x0/0x1b
[   28.178075] bus: 'serio': add driver serio_raw
[   28.178224] initcall serio_raw_init+0x0/0x1b returned 0 after 0 msecs
[   28.178226] calling  emu_init+0x0/0x1b
[   28.178229] bus: 'pci': add driver Emu10k1_gameport
[   28.178367] initcall emu_init+0x0/0x1b returned 0 after 0 msecs
[   28.178369] calling  fm801_gp_init+0x0/0x1b
[   28.178372] bus: 'pci': add driver FM801_gameport
[   28.178505] initcall fm801_gp_init+0x0/0x1b returned 0 after 0 msecs
[   28.178508] calling  l4_init+0x0/0x278
[   28.178521] initcall l4_init+0x0/0x278 returned -19 after 0 msecs
[   28.178524] calling  mousedev_init+0x0/0x8e
[   28.178536] device: 'mice': device_add
[   28.178627] PM: Adding info for No Bus:mice
[   28.178730] device: 'psaux': device_add
[   28.178759] PM: Adding info for No Bus:psaux
[   28.178861] mice: PS/2 mouse device common for all mice
[   28.178863] initcall mousedev_init+0x0/0x8e returned 0 after 0 msecs
[   28.178866] calling  joydev_init+0x0/0x12
[   28.178868] initcall joydev_init+0x0/0x12 returned 0 after 0 msecs
[   28.178870] calling  evbug_init+0x0/0x12
[   28.178873] initcall evbug_init+0x0/0x12 returned 0 after 0 msecs
[   28.178875] calling  atkbd_init+0x0/0x27
[   28.178877] bus: 'serio': add driver atkbd
[   28.178982] initcall atkbd_init+0x0/0x27 returned 0 after 0 msecs
[   28.178985] calling  nkbd_init+0x0/0x1b
[   28.178986] bus: 'serio': add driver newtonkbd
[   28.179087] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[   28.179089] bus: 'serio': really_probe: probing driver atkbd with device serio0
[   28.179143] initcall nkbd_init+0x0/0x1b returned 0 after 0 msecs
[   28.179146] calling  analog_init+0x0/0xf1
[   28.179151] initcall analog_init+0x0/0xf1 returned 0 after 0 msecs
[   28.179154] calling  grip_init+0x0/0x16
[   28.179156] initcall grip_init+0x0/0x16 returned 0 after 0 msecs
[   28.179159] calling  grip_init+0x0/0x16
[   28.179168] initcall grip_init+0x0/0x16 returned 0 after 0 msecs
[   28.179170] calling  guillemot_init+0x0/0x16
[   28.179173] initcall guillemot_init+0x0/0x16 returned 0 after 0 msecs
[   28.179176] calling  iforce_init+0x0/0x1b
[   28.179177] bus: 'serio': add driver iforce
[   28.179201] bus: 'gameport': add driver analog
[   28.179329] bus: 'gameport': add driver grip
[   28.179438] bus: 'gameport': add driver grip_mp
[   28.179546] bus: 'gameport': add driver guillemot
[   28.577526] initcall iforce_init+0x0/0x1b returned 0 after 379 msecs
[   28.577529] calling  interact_init+0x0/0x16
[   28.577533] initcall interact_init+0x0/0x16 returned 0 after 0 msecs
[   28.577535] calling  joydump_init+0x0/0x16
[   28.577538] initcall joydump_init+0x0/0x16 returned 0 after 0 msecs
[   28.577540] calling  magellan_init+0x0/0x1b
[   28.577542] bus: 'serio': add driver magellan
[   28.577646] bus: 'gameport': add driver interact
[   28.577733] initcall magellan_init+0x0/0x1b returned 0 after 0 msecs
[   28.577736] calling  sw_init+0x0/0x16
[   28.577738] initcall sw_init+0x0/0x16 returned 0 after 0 msecs
[   28.577741] calling  spaceball_init+0x0/0x1b
[   28.577742] bus: 'serio': add driver spaceball
[   28.577847] bus: 'gameport': add driver joydump
[   28.577961] initcall spaceball_init+0x0/0x1b returned 0 after 0 msecs
[   28.577964] calling  stinger_init+0x0/0x1b
[   28.577965] bus: 'serio': add driver stinger
[   28.578086] bus: 'gameport': add driver sidewinder
[   28.578183] initcall stinger_init+0x0/0x1b returned 0 after 0 msecs
[   28.578185] calling  tmdc_init+0x0/0x16
[   28.578188] initcall tmdc_init+0x0/0x16 returned 0 after 0 msecs
[   28.578190] calling  twidjoy_init+0x0/0x1b
[   28.578192] bus: 'serio': add driver twidjoy
[   28.578297] bus: 'gameport': add driver tmdc
[   28.578418] initcall twidjoy_init+0x0/0x1b returned 0 after 0 msecs
[   28.578420] calling  warrior_init+0x0/0x1b
[   28.578422] bus: 'serio': add driver warrior
[   28.578574] initcall warrior_init+0x0/0x1b returned 0 after 0 msecs
[   28.578577] calling  usb_xpad_init+0x0/0x38
[   28.578582] bus: 'usb': add driver xpad
[   28.578698] usbcore: registered new interface driver xpad
[   28.578702] xpad: X-Box pad driver
[   28.578704] initcall usb_xpad_init+0x0/0x38 returned 0 after 0 msecs
[   28.578706] calling  ads7846_init+0x0/0x12
[   28.578709] bus: 'spi': add driver ads7846
[   28.578818] initcall ads7846_init+0x0/0x12 returned 0 after 0 msecs
[   28.578821] calling  gunze_init+0x0/0x1b
[   28.578823] bus: 'serio': add driver gunze
[   28.578926] initcall gunze_init+0x0/0x1b returned 0 after 0 msecs
[   28.578928] calling  mk712_init+0x0/0x1ba
[   28.578934] mk712: device not present
[   28.578937] initcall mk712_init+0x0/0x1ba returned -19 after 0 msecs
[   28.578939] calling  usbtouch_init+0x0/0x1b
[   28.578942] bus: 'usb': add driver usbtouchscreen
[   28.579053] usbcore: registered new interface driver usbtouchscreen
[   28.579058] initcall usbtouch_init+0x0/0x1b returned 0 after 0 msecs
[   28.579060] calling  pm_init+0x0/0x1b
[   28.579062] bus: 'serio': add driver penmountlpc
[   28.579200] initcall pm_init+0x0/0x1b returned 0 after 0 msecs
[   28.579203] calling  touchit213_init+0x0/0x1b
[   28.579204] bus: 'serio': add driver touchit213
[   28.579312] initcall touchit213_init+0x0/0x1b returned 0 after 0 msecs
[   28.579315] calling  tw_init+0x0/0x1b
[   28.579317] bus: 'serio': add driver touchwin
[   28.579426] initcall tw_init+0x0/0x1b returned 0 after 0 msecs
[   28.579429] calling  ucb1400_ts_init+0x0/0x12
[   28.579431] bus: 'ac97': add driver ucb1400_ts
[   28.579554] initcall ucb1400_ts_init+0x0/0x12 returned 0 after 0 msecs
[   28.579557] calling  xenkbd_init+0x0/0x58
[   28.579559] initcall xenkbd_init+0x0/0x58 returned -19 after 0 msecs
[   28.579561] calling  ds1374_init+0x0/0x14
[   28.579564] bus: 'i2c': add driver rtc-ds1374
[   28.579661] i2c-core: driver [rtc-ds1374] registered
[   28.579664] initcall ds1374_init+0x0/0x14 returned 0 after 0 msecs
[   28.579667] calling  ds1511_rtc_init+0x0/0x12
[   28.579669] bus: 'platform': add driver ds1511
[   28.579796] initcall ds1511_rtc_init+0x0/0x12 returned 0 after 0 msecs
[   28.579798] calling  ds1553_init+0x0/0x12
[   28.579800] bus: 'platform': add driver rtc-ds1553
[   28.579917] initcall ds1553_init+0x0/0x12 returned 0 after 0 msecs
[   28.579920] calling  ds1672_init+0x0/0x14
[   28.579921] bus: 'i2c': add driver ds1672
[   28.580019] i2c-core: driver [ds1672] registered
[   28.580022] initcall ds1672_init+0x0/0x14 returned 0 after 0 msecs
[   28.580024] calling  fm3130_init+0x0/0x14
[   28.580026] bus: 'i2c': add driver rtc-fm3130
[   28.580121] i2c-core: driver [rtc-fm3130] registered
[   28.580124] initcall fm3130_init+0x0/0x14 returned 0 after 0 msecs
[   28.580126] calling  m41t80_rtc_init+0x0/0x14
[   28.580128] bus: 'i2c': add driver rtc-m41t80
[   28.580245] i2c-core: driver [rtc-m41t80] registered
[   28.580247] initcall m41t80_rtc_init+0x0/0x14 returned 0 after 0 msecs
[   28.580250] calling  m41t94_init+0x0/0x12
[   28.580251] bus: 'spi': add driver rtc-m41t94
[   28.580349] initcall m41t94_init+0x0/0x12 returned 0 after 0 msecs
[   28.580352] calling  max6900_init+0x0/0x14
[   28.580353] bus: 'i2c': add driver max6900
[   28.580448] i2c-core: driver [max6900] registered
[   28.580451] initcall max6900_init+0x0/0x14 returned 0 after 0 msecs
[   28.580453] calling  pcf8563_init+0x0/0x14
[   28.580455] bus: 'i2c': add driver rtc-pcf8563
[   28.580571] i2c-core: driver [rtc-pcf8563] registered
[   28.580574] initcall pcf8563_init+0x0/0x14 returned 0 after 0 msecs
[   28.580576] calling  pcf8583_init+0x0/0x14
[   28.580578] bus: 'i2c': add driver pcf8583
[   28.580673] i2c-core: driver [pcf8583] registered
[   28.580676] initcall pcf8583_init+0x0/0x14 returned 0 after 0 msecs
[   28.580678] calling  r9701_init+0x0/0x12
[   28.580680] bus: 'spi': add driver rtc-r9701
[   28.580784] initcall r9701_init+0x0/0x12 returned 0 after 0 msecs
[   28.580786] calling  rs5c372_init+0x0/0x14
[   28.580788] bus: 'i2c': add driver rtc-rs5c372
[   28.580897] i2c-core: driver [rtc-rs5c372] registered
[   28.580900] initcall rs5c372_init+0x0/0x14 returned 0 after 0 msecs
[   28.580902] calling  s35390a_rtc_init+0x0/0x14
[   28.580904] bus: 'i2c': add driver rtc-s35390a
[   28.581002] i2c-core: driver [rtc-s35390a] registered
[   28.581005] initcall s35390a_rtc_init+0x0/0x14 returned 0 after 0 msecs
[   28.581007] calling  stk17ta8_init+0x0/0x12
[   28.581009] bus: 'platform': add driver stk17ta8
[   28.581116] initcall stk17ta8_init+0x0/0x12 returned 0 after 0 msecs
[   28.581119] calling  v3020_init+0x0/0x12
[   28.581121] bus: 'platform': add driver v3020
[   28.581248] initcall v3020_init+0x0/0x12 returned 0 after 0 msecs
[   28.581250] calling  x1205_init+0x0/0x14
[   28.581252] bus: 'i2c': add driver rtc-x1205
[   28.581347] i2c-core: driver [rtc-x1205] registered
[   28.581350] initcall x1205_init+0x0/0x14 returned 0 after 0 msecs
[   28.581352] calling  i2c_dev_init+0x0/0xa5
[   28.581353] i2c /dev entries driver
[   28.581366] device class 'i2c-dev': registering
[   28.581474] bus: 'i2c': add driver dev_driver
[   28.581585] i2c-core: driver [dev_driver] registered
[   28.581588] initcall i2c_dev_init+0x0/0xa5 returned 0 after 0 msecs
[   28.581590] calling  i2c_ali1535_init+0x0/0x1b
[   28.581598] bus: 'pci': add driver ali1535_smbus
[   28.581729] initcall i2c_ali1535_init+0x0/0x1b returned 0 after 0 msecs
[   28.581731] calling  ali1563_init+0x0/0x1b
[   28.581734] bus: 'pci': add driver ali1563_smbus
[   28.581868] initcall ali1563_init+0x0/0x1b returned 0 after 0 msecs
[   28.581870] calling  amd756_init+0x0/0x1b
[   28.581873] bus: 'pci': add driver amd756_smbus
[   28.582021] initcall amd756_init+0x0/0x1b returned 0 after 0 msecs
[   28.582024] calling  i2c_amd8111_init+0x0/0x1b
[   28.582027] bus: 'pci': add driver amd8111_smbus2
[   28.582157] initcall i2c_amd8111_init+0x0/0x1b returned 0 after 0 msecs
[   28.582159] calling  i2c_i801_init+0x0/0x1b
[   28.582162] bus: 'pci': add driver i801_smbus
[   28.582186] bus: 'pci': driver_probe_device: matched device 0000:00:1f.3 with driver i801_smbus
[   28.582188] bus: 'pci': really_probe: probing driver i801_smbus with device 0000:00:1f.3
[   28.582208] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   28.582253] device: 'i2c-0': device_add
[   28.582276] PM: Adding info for No Bus:i2c-0
[   28.582376] i2c-adapter i2c-0: adapter [SMBus I801 adapter at 4000] registered
[   28.582382] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x50
[   28.597420] device: 'i2c-0': device_add
[   28.597483] PM: Adding info for No Bus:i2c-0
[   28.597602] i2c-dev: adapter [SMBus I801 adapter at 4000] registered as minor 0
[   28.597606] driver: '0000:00:1f.3': driver_bound: bound to device 'i801_smbus'
[   28.597608] bus: 'pci': really_probe: bound device 0000:00:1f.3 to driver i801_smbus
[   28.597717] initcall i2c_i801_init+0x0/0x1b returned 0 after 14 msecs
[   28.597720] calling  i2c_sis630_init+0x0/0x1b
[   28.597723] bus: 'pci': add driver sis630_smbus
[   28.597848] initcall i2c_sis630_init+0x0/0x1b returned 0 after 0 msecs
[   28.597851] calling  i2c_sis96x_init+0x0/0x1b
[   28.597853] bus: 'pci': add driver sis96x_smbus
[   28.598004] initcall i2c_sis96x_init+0x0/0x1b returned 0 after 0 msecs
[   28.598007] calling  i2c_vt586b_init+0x0/0x1b
[   28.598009] bus: 'pci': add driver vt586b_smbus
[   28.598136] initcall i2c_vt586b_init+0x0/0x1b returned 0 after 0 msecs
[   28.598138] calling  i2c_vt596_init+0x0/0x1b
[   28.598141] bus: 'pci': add driver vt596_smbus
[   28.598265] initcall i2c_vt596_init+0x0/0x1b returned 0 after 0 msecs
[   28.598268] calling  ocores_i2c_init+0x0/0x12
[   28.598270] bus: 'platform': add driver ocores-i2c
[   28.598395] initcall ocores_i2c_init+0x0/0x12 returned 0 after 0 msecs
[   28.598397] calling  i2c_adap_simtec_init+0x0/0x12
[   28.598399] bus: 'platform': add driver simtec-i2c
[   28.598510] initcall i2c_adap_simtec_init+0x0/0x12 returned 0 after 0 msecs
[   28.598513] calling  i2c_parport_init+0x0/0x160
[   28.598514] i2c-parport-light: adapter type unspecified
[   28.598516] initcall i2c_parport_init+0x0/0x160 returned -19 after 0 msecs
[   28.598518] calling  taos_init+0x0/0x1b
[   28.598520] bus: 'serio': add driver taos-evm
[   28.598624] initcall taos_init+0x0/0x1b returned 0 after 0 msecs
[   28.598627] calling  usb_i2c_tiny_usb_init+0x0/0x1b
[   28.598633] bus: 'usb': add driver i2c-tiny-usb
[   28.598773] usbcore: registered new interface driver i2c-tiny-usb
[   28.598777] initcall usb_i2c_tiny_usb_init+0x0/0x1b returned 0 after 0 msecs
[   28.598780] calling  i2c_pca_pf_init+0x0/0x12
[   28.598782] bus: 'platform': add driver i2c-pca-platform
[   28.598887] initcall i2c_pca_pf_init+0x0/0x12 returned 0 after 0 msecs
[   28.598890] calling  at24_init+0x0/0x3a
[   28.598892] bus: 'i2c': add driver at24
[   28.598990] i2c-core: driver [at24] registered
[   28.598993] initcall at24_init+0x0/0x3a returned 0 after 0 msecs
[   28.598996] calling  eeprom_init+0x0/0x14
[   28.598997] bus: 'i2c': add driver eeprom
[   28.599120] i2c-core: driver [eeprom] registered
[   28.599125] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x50
[   28.613409] i2c-adapter i2c-0: Creating eeprom at 0x50
[   28.613414] device: '0-0050': device_add
[   28.613422] bus: 'i2c': add device 0-0050
[   28.613437] PM: Adding info for i2c:0-0050
[   28.613447] i2c 0-0050: uevent
[   28.613536] bus: 'i2c': driver_probe_device: matched device 0-0050 with driver eeprom
[   28.613538] bus: 'i2c': really_probe: probing driver eeprom with device 0-0050
[   28.613545] eeprom 0-0050: probe
[   28.613549] driver: '0-0050': driver_bound: bound to device 'eeprom'
[   28.613551] bus: 'i2c': really_probe: bound device 0-0050 to driver eeprom
[   28.613563] i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0050
[   28.613565] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x51
[   28.621413] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x52
[   28.629413] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x53
[   28.637413] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x54
[   28.645414] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x55
[   28.653415] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x56
[   28.661415] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x57
[   28.669418] initcall eeprom_init+0x0/0x14 returned 0 after 67 msecs
[   28.669421] calling  pca9539_init+0x0/0x14
[   28.669423] bus: 'i2c': add driver pca9539
[   28.669533] i2c-core: driver [pca9539] registered
[   28.669540] initcall pca9539_init+0x0/0x14 returned 0 after 0 msecs
[   28.669543] calling  pcf8574_init+0x0/0x14
[   28.669544] bus: 'i2c': add driver pcf8574
[   28.669655] i2c-core: driver [pcf8574] registered
[   28.669662] initcall pcf8574_init+0x0/0x14 returned 0 after 0 msecs
[   28.669665] calling  pcf8575_init+0x0/0x14
[   28.669666] bus: 'i2c': add driver pcf8575
[   28.669763] i2c-core: driver [pcf8575] registered
[   28.669770] initcall pcf8575_init+0x0/0x14 returned 0 after 0 msecs
[   28.669772] calling  tsl2550_init+0x0/0x14
[   28.669774] bus: 'i2c': add driver tsl2550
[   28.669885] i2c-core: driver [tsl2550] registered
[   28.669888] initcall tsl2550_init+0x0/0x14 returned 0 after 0 msecs
[   28.669890] calling  asb100_init+0x0/0x14
[   28.669892] bus: 'i2c': add driver asb100
[   28.670012] i2c-core: driver [asb100] registered
[   28.670016] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   28.677420] initcall asb100_init+0x0/0x14 returned 0 after 7 msecs
[   28.677423] calling  sensors_w83627hf_init+0x0/0x14d
[   28.677434] w83627hf: Unsupported chip (DEVID=0x74)
[   28.677445] initcall sensors_w83627hf_init+0x0/0x14d returned -19 after 0 msecs
[   28.677447] calling  sensors_w83791d_init+0x0/0x14
[   28.677449] bus: 'i2c': add driver w83791d
[   28.677548] i2c-core: driver [w83791d] registered
[   28.677552] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   28.685418] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   28.693416] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   28.725419] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f
[   28.733422] initcall sensors_w83791d_init+0x0/0x14 returned 0 after 53 msecs
[   28.733425] calling  ad7414_init+0x0/0x14
[   28.733427] bus: 'i2c': add driver ad7414
[   28.733531] i2c-core: driver [ad7414] registered
[   28.733534] initcall ad7414_init+0x0/0x14 returned 0 after 0 msecs
[   28.733537] calling  ad7418_init+0x0/0x14
[   28.733539] bus: 'i2c': add driver ad7418
[   28.733649] i2c-core: driver [ad7418] registered
[   28.733652] initcall ad7418_init+0x0/0x14 returned 0 after 0 msecs
[   28.733654] calling  init_adcxx+0x0/0x7b
[   28.733656] bus: 'spi': add driver adcxx1s
[   28.733752] bus: 'spi': add driver adcxx2s
[   28.733853] bus: 'spi': add driver adcxx4s
[   28.733968] bus: 'spi': add driver adcxx8s
[   28.734065] initcall init_adcxx+0x0/0x7b returned 0 after 0 msecs
[   28.734067] calling  sensors_adm1021_init+0x0/0x14
[   28.734069] bus: 'i2c': add driver adm1021
[   28.734165] i2c-core: driver [adm1021] registered
[   28.734170] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x18
[   28.741421] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x19
[   28.749420] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x1a
[   28.757421] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29
[   28.765422] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a
[   28.773422] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b
[   28.781423] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c
[   28.813425] adm1021: detect failed, chip not detected!
[   28.813426] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d
[   28.821425] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e
[   28.853428] adm1021: detect failed, chip not detected!
[   28.853432] initcall sensors_adm1021_init+0x0/0x14 returned 0 after 113 msecs
[   28.853435] calling  sensors_adm1025_init+0x0/0x14
[   28.853437] bus: 'i2c': add driver adm1025
[   28.853550] i2c-core: driver [adm1025] registered
[   28.853554] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   28.861429] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   28.869429] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   28.893430] i2c-adapter i2c-0: ADM1025 detection failed at 0x2e.
[   28.893435] initcall sensors_adm1025_init+0x0/0x14 returned 0 after 38 msecs
[   28.893437] calling  sensors_adm1029_init+0x0/0x14
[   28.893439] bus: 'i2c': add driver adm1029
[   28.893538] i2c-core: driver [adm1029] registered
[   28.893543] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x28
[   28.901432] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29
[   28.909431] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a
[   28.917431] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b
[   28.925432] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   28.933433] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   28.941434] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   28.981436] adm1029: Unsupported chip (man_id=0x00, chip_id=0x00)
[   28.981437] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f
[   28.989438] initcall sensors_adm1029_init+0x0/0x14 returned 0 after 91 msecs
[   28.989441] calling  sensors_adm1031_init+0x0/0x14
[   28.989443] bus: 'i2c': add driver adm1031
[   28.989542] i2c-core: driver [adm1031] registered
[   28.989546] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   28.997436] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.005437] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   29.029443] initcall sensors_adm1031_init+0x0/0x14 returned 0 after 38 msecs
[   29.029445] calling  sensors_adm9240_init+0x0/0x14
[   29.029447] bus: 'i2c': add driver adm9240
[   29.029566] i2c-core: driver [adm9240] registered
[   29.029571] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   29.037440] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.045440] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   29.061440] i2c-adapter i2c-0: detect fail: address match, 0x2e
[   29.061442] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f
[   29.069445] initcall sensors_adm9240_init+0x0/0x14 returned 0 after 38 msecs
[   29.069447] calling  sensors_ads7828_init+0x0/0x53
[   29.069449] bus: 'i2c': add driver ads7828
[   29.069560] i2c-core: driver [ads7828] registered
[   29.069564] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48
[   29.077442] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x49
[   29.085442] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4a
[   29.093442] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b
[   29.101447] initcall sensors_ads7828_init+0x0/0x53 returned 0 after 30 msecs
[   29.101449] calling  applesmc_init+0x0/0x557
[   29.101452] applesmc: supported laptop not found!
[   29.101453] applesmc: driver init failed (ret=-19)!
[   29.101455] initcall applesmc_init+0x0/0x557 returned -19 after 0 msecs
[   29.101457] calling  atxp1_init+0x0/0x14
[   29.101459] bus: 'i2c': add driver atxp1
[   29.101568] i2c-core: driver [atxp1] registered
[   29.101572] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x37
[   29.109444] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e
[   29.141450] initcall atxp1_init+0x0/0x14 returned 0 after 38 msecs
[   29.141452] calling  f71882fg_init+0x0/0xfd
[   29.141468] f71882fg: Not a Fintek device
[   29.141479] f71882fg: Not a Fintek device
[   29.141481] initcall f71882fg_init+0x0/0xfd returned -19 after 0 msecs
[   29.141483] calling  sensors_f75375_init+0x0/0x14
[   29.141485] bus: 'i2c': add driver f75375
[   29.141598] i2c-core: driver [f75375] registered
[   29.141603] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.149446] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   29.197448] i2c-adapter i2c-0: failed,FFFF,02,2222
[   29.197453] initcall sensors_f75375_init+0x0/0x14 returned 0 after 53 msecs
[   29.197455] calling  sensors_fscher_init+0x0/0x14
[   29.197457] bus: 'i2c': add driver fscher
[   29.197557] i2c-core: driver [fscher] registered
[   29.197561] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x73
[   29.205453] initcall sensors_fscher_init+0x0/0x14 returned 0 after 7 msecs
[   29.205455] calling  fschmd_init+0x0/0x14
[   29.205457] bus: 'i2c': add driver fschmd
[   29.205556] i2c-core: driver [fschmd] registered
[   29.205561] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x73
[   29.213454] initcall fschmd_init+0x0/0x14 returned 0 after 7 msecs
[   29.213456] calling  sm_fscpos_init+0x0/0x14
[   29.213458] bus: 'i2c': add driver fscpos
[   29.213577] i2c-core: driver [fscpos] registered
[   29.213582] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x73
[   29.221454] initcall sm_fscpos_init+0x0/0x14 returned 0 after 7 msecs
[   29.221456] calling  sensors_gl518sm_init+0x0/0x14
[   29.221458] bus: 'i2c': add driver gl518sm
[   29.221566] i2c-core: driver [gl518sm] registered
[   29.221570] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   29.229448] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.237454] initcall sensors_gl518sm_init+0x0/0x14 returned 0 after 15 msecs
[   29.237456] calling  sensors_gl520sm_init+0x0/0x14
[   29.237458] bus: 'i2c': add driver gl520sm
[   29.237558] i2c-core: driver [gl520sm] registered
[   29.237562] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   29.245453] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.253456] initcall sensors_gl520sm_init+0x0/0x14 returned 0 after 15 msecs
[   29.253458] calling  sm_it87_init+0x0/0x299
[   29.253480] it87: Unsupported chip (DEVID=0x7401)
[   29.253485] initcall sm_it87_init+0x0/0x299 returned -19 after 0 msecs
[   29.253487] calling  k8temp_init+0x0/0x1b
[   29.253495] bus: 'pci': add driver k8temp
[   29.253646] initcall k8temp_init+0x0/0x1b returned 0 after 0 msecs
[   29.253648] calling  sensors_lm75_init+0x0/0x14
[   29.253650] bus: 'i2c': add driver lm75
[   29.253747] i2c-core: driver [lm75] registered
[   29.253751] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48
[   29.261454] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x49
[   29.269453] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4a
[   29.277454] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b
[   29.285455] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c
[   29.325457] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d
[   29.333458] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e
[   29.373460] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4f
[   29.381465] initcall sensors_lm75_init+0x0/0x14 returned 0 after 121 msecs
[   29.381467] calling  sensors_lm77_init+0x0/0x14
[   29.381469] bus: 'i2c': add driver lm77
[   29.381578] i2c-core: driver [lm77] registered
[   29.381583] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48
[   29.389462] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x49
[   29.397462] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4a
[   29.405462] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b
[   29.413465] initcall sensors_lm77_init+0x0/0x14 returned 0 after 30 msecs
[   29.413467] calling  sm_lm78_init+0x0/0x329
[   29.413469] bus: 'i2c': add driver lm78
[   29.413589] i2c-core: driver [lm78] registered
[   29.413591] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x28
[   29.421463] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29
[   29.429464] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a
[   29.437464] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b
[   29.445465] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   29.453464] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.461465] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   29.485468] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f
[   29.493487] initcall sm_lm78_init+0x0/0x329 returned 0 after 76 msecs
[   29.493489] calling  sensors_lm80_init+0x0/0x14
[   29.493491] bus: 'i2c': add driver lm80
[   29.493600] i2c-core: driver [lm80] registered
[   29.493604] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x28
[   29.501468] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29
[   29.509469] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a
[   29.517469] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b
[   29.525469] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   29.533470] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.541470] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   29.573473] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2f
[   29.581477] initcall sensors_lm80_init+0x0/0x14 returned 0 after 83 msecs
[   29.581479] calling  sensors_lm83_init+0x0/0x14
[   29.581481] bus: 'i2c': add driver lm83
[   29.581581] i2c-core: driver [lm83] registered
[   29.581585] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x18
[   29.589473] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x19
[   29.597474] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x1a
[   29.605475] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29
[   29.613474] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a
[   29.621475] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b
[   29.629476] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c
[   29.653478] i2c-adapter i2c-0: LM83 detection failed at 0x4c.
[   29.653479] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d
[   29.661478] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e
[   29.685479] i2c-adapter i2c-0: LM83 detection failed at 0x4e.
[   29.685484] initcall sensors_lm83_init+0x0/0x14 returned 0 after 99 msecs
[   29.685486] calling  sm_lm85_init+0x0/0x14
[   29.685488] bus: 'i2c': add driver lm85
[   29.685601] i2c-core: driver [lm85] registered
[   29.685604] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   29.693481] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.701480] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   29.725482] i2c-adapter i2c-0: Detecting device at 0,0x2e with COMPANY: 0x5c and VERSTEP: 0x68
[   29.725484] i2c-adapter i2c-0: Autodetecting device at 0,0x2e ...
[   29.725486] i2c-adapter i2c-0: lm85: Detected SMSC chip
[   29.725487] i2c-adapter i2c-0: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85.
[   29.725490] device: '0-002e': device_add
[   29.725499] bus: 'i2c': add device 0-002e
[   29.725514] PM: Adding info for i2c:0-002e
[   29.725521] driver: '0-002e': driver_bound: bound to device 'lm85'
[   29.725524] i2c-adapter i2c-0: client [lm85] registered with bus id 0-002e
[   29.741534] device: 'hwmon0': device_add
[   29.741562] PM: Adding info for No Bus:hwmon0
[   29.741666] initcall sm_lm85_init+0x0/0x14 returned 0 after 53 msecs
[   29.741669] calling  sensors_lm87_init+0x0/0x14
[   29.741671] bus: 'i2c': add driver lm87
[   29.741769] i2c-core: driver [lm87] registered
[   29.741774] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   29.749484] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.757484] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   29.757490] initcall sensors_lm87_init+0x0/0x14 returned 0 after 15 msecs
[   29.757492] calling  sensors_lm92_init+0x0/0x14
[   29.757494] bus: 'i2c': add driver lm92
[   29.757608] i2c-core: driver [lm92] registered
[   29.757612] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x48
[   29.765485] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x49
[   29.773485] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4a
[   29.781486] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4b
[   29.789489] initcall sensors_lm92_init+0x0/0x14 returned 0 after 30 msecs
[   29.789492] calling  sensors_max1619_init+0x0/0x14
[   29.789494] bus: 'i2c': add driver max1619
[   29.789594] i2c-core: driver [max1619] registered
[   29.789599] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x18
[   29.797488] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x19
[   29.805507] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x1a
[   29.813488] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x29
[   29.821488] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2a
[   29.829489] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2b
[   29.837489] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4c
[   29.869491] i2c-adapter i2c-0: MAX1619 detection failed at 0x4c.
[   29.869493] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4d
[   29.877491] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x4e
[   29.909493] i2c-adapter i2c-0: MAX1619 detection failed at 0x4e.
[   29.909497] initcall sensors_max1619_init+0x0/0x14 returned 0 after 114 msecs
[   29.909500] calling  pc87360_init+0x0/0x191
[   29.909516] pc87360: PC8736x not detected, module not inserted.
[   29.909517] initcall pc87360_init+0x0/0x191 returned -19 after 0 msecs
[   29.909519] calling  pc87427_init+0x0/0x11b
[   29.909537] initcall pc87427_init+0x0/0x11b returned -19 after 0 msecs
[   29.909539] calling  sm_sis5595_init+0x0/0x1b
[   29.909543] bus: 'pci': add driver sis5595
[   29.909682] initcall sm_sis5595_init+0x0/0x1b returned 0 after 0 msecs
[   29.909684] calling  smsc47b397_init+0x0/0x18a
[   29.909695] initcall smsc47b397_init+0x0/0x18a returned -19 after 0 msecs
[   29.909697] calling  sm_smsc47m1_init+0x0/0x1f0
[   29.909708] initcall sm_smsc47m1_init+0x0/0x1f0 returned -19 after 0 msecs
[   29.909710] calling  smsc47m192_init+0x0/0x14
[   29.909712] bus: 'i2c': add driver smsc47m192
[   29.909829] i2c-core: driver [smsc47m192] registered
[   29.909834] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2c
[   29.917495] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2d
[   29.925497] initcall smsc47m192_init+0x0/0x14 returned 0 after 15 msecs
[   29.925500] calling  sm_via686a_init+0x0/0x1b
[   29.925502] bus: 'pci': add driver via686a
[   29.925629] initcall sm_via686a_init+0x0/0x1b returned 0 after 0 msecs
[   29.925631] calling  vt1211_init+0x0/0x150
[   29.925652] initcall vt1211_init+0x0/0x150 returned -19 after 0 msecs
[   29.925654] calling  sensors_w83627ehf_init+0x0/0x150
[   29.925686] initcall sensors_w83627ehf_init+0x0/0x150 returned -19 after 0 msecs
[   29.925689] calling  sensors_w83l785ts_init+0x0/0x14
[   29.925691] bus: 'i2c': add driver w83l785ts
[   29.925788] i2c-core: driver [w83l785ts] registered
[   29.925793] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x2e
[   29.925798] initcall sensors_w83l785ts_init+0x0/0x14 returned 0 after 0 msecs
[   29.925801] calling  usb_pcwd_init+0x0/0x4b
[   29.925806] bus: 'usb': add driver pcwd_usb
[   29.925929] usbcore: registered new interface driver pcwd_usb
[   29.925932] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02 (21 Jan 2007)
[   29.925935] initcall usb_pcwd_init+0x0/0x4b returned 0 after 0 msecs
[   29.925937] calling  advwdt_init+0x0/0x5f
[   29.925938] WDT driver for Advantech single board computer initialising.
[   29.925940] bus: 'platform': add driver advantechwdt
[   29.926048] Registering platform device 'advantechwdt'. Parent at platform
[   29.926050] device: 'advantechwdt': device_add
[   29.926059] bus: 'platform': add device advantechwdt
[   29.926080] PM: Adding info for platform:advantechwdt
[   29.926177] bus: 'platform': driver_probe_device: matched device advantechwdt with driver advantechwdt
[   29.926179] bus: 'platform': really_probe: probing driver advantechwdt with device advantechwdt
[   29.926192] device: 'watchdog': device_add
[   29.926267] PM: Adding info for No Bus:watchdog
[   29.926369] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[   29.926371] driver: 'advantechwdt': driver_bound: bound to device 'advantechwdt'
[   29.926373] bus: 'platform': really_probe: bound device advantechwdt to driver advantechwdt
[   29.926377] initcall advwdt_init+0x0/0x5f returned 0 after 0 msecs
[   29.926379] calling  alim7101_wdt_init+0x0/0x18e
[   29.926380] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[   29.926391] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[   29.926392] initcall alim7101_wdt_init+0x0/0x18e returned -16 after 0 msecs
[   29.926395] initcall alim7101_wdt_init+0x0/0x18e returned with error code -16 
[   29.926397] calling  ibwdt_init+0x0/0x5f
[   29.926398] ib700wdt: WDT driver for IB700 single board computer initialising.
[   29.926400] bus: 'platform': add driver ib700wdt
[   29.926511] Registering platform device 'ib700wdt'. Parent at platform
[   29.926512] device: 'ib700wdt': device_add
[   29.926520] bus: 'platform': add device ib700wdt
[   29.926533] PM: Adding info for platform:ib700wdt
[   29.926629] bus: 'platform': driver_probe_device: matched device ib700wdt with driver ib700wdt
[   29.926630] bus: 'platform': really_probe: probing driver ib700wdt with device ib700wdt
[   29.926640] ib700wdt: START method I/O 443 is not available.
[   29.926650] ib700wdt: probe of ib700wdt failed with error -5
[   29.926654] initcall ibwdt_init+0x0/0x5f returned 0 after 0 msecs
[   29.926656] calling  ibmasr_init+0x0/0x264
[   29.926658] initcall ibmasr_init+0x0/0x264 returned -19 after 0 msecs
[   29.926661] calling  wafwdt_init+0x0/0x162
[   29.926662] WDT driver for Wafer 5823 single board computer initialising.
[   29.926666] Wafer 5823 WDT: I/O address 0x0443 already in use
[   29.926669] initcall wafwdt_init+0x0/0x162 returned -5 after 0 msecs
[   29.926672] initcall wafwdt_init+0x0/0x162 returned with error code -5 
[   29.926674] calling  iTCO_wdt_init_module+0x0/0x6e
[   29.926675] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   29.926677] bus: 'platform': add driver iTCO_wdt
[   29.926807] Registering platform device 'iTCO_wdt'. Parent at platform
[   29.926809] device: 'iTCO_wdt': device_add
[   29.926823] bus: 'platform': add device iTCO_wdt
[   29.926836] PM: Adding info for platform:iTCO_wdt
[   29.926929] bus: 'platform': driver_probe_device: matched device iTCO_wdt with driver iTCO_wdt
[   29.926931] bus: 'platform': really_probe: probing driver iTCO_wdt with device iTCO_wdt
[   29.926997] iTCO_wdt: No card detected
[   29.927007] initcall iTCO_wdt_init_module+0x0/0x6e returned 0 after 0 msecs
[   29.927009] calling  iTCO_vendor_init_module+0x0/0x1c
[   29.927011] iTCO_vendor_support: vendor-support=0
[   29.927012] initcall iTCO_vendor_init_module+0x0/0x1c returned 0 after 0 msecs
[   29.927015] calling  it8712f_wdt_init+0x0/0x1ac
[   29.927052] initcall it8712f_wdt_init+0x0/0x1ac returned -19 after 0 msecs
[   29.927054] calling  hpwdt_init+0x0/0x1b
[   29.927058] bus: 'pci': add driver hpwdt
[   29.927199] initcall hpwdt_init+0x0/0x1b returned 0 after 0 msecs
[   29.927201] calling  pc87413_init+0x0/0x92
[   29.927202] pc87413 WDT: Version 1.1 at io 0x2E
[   29.927204] pc87413 WDT: cannot register miscdev on minor=130 (err=-16)
[   29.927206] initcall pc87413_init+0x0/0x92 returned -16 after 0 msecs
[   29.927208] initcall pc87413_init+0x0/0x92 returned with error code -16 
[   29.927210] calling  sbc60xxwdt_init+0x0/0x17d
[   29.927214] sbc60xxwdt: I/O address 0x0443 already in use
[   29.927216] initcall sbc60xxwdt_init+0x0/0x17d returned -5 after 0 msecs
[   29.927218] initcall sbc60xxwdt_init+0x0/0x17d returned with error code -5 
[   29.927220] calling  sbc8360_init+0x0/0x19e
[   29.927223] sbc8360: failed to register misc device
[   29.927228] initcall sbc8360_init+0x0/0x19e returned -16 after 0 msecs
[   29.927230] initcall sbc8360_init+0x0/0x19e returned with error code -16 
[   29.927234] calling  cpu5wdt_init_module+0x0/0x134
[   29.927238] cpu5wdt: sorry, was my fault
[   29.927239] cpu5wdt: misc_register failed
[   29.927242] initcall cpu5wdt_init_module+0x0/0x134 returned -16 after 0 msecs
[   29.927244] initcall cpu5wdt_init_module+0x0/0x134 returned with error code -16 
[   29.927246] calling  wdt_init+0x0/0x1c9
[   29.927247] w83697hf/hg WDT: WDT driver for W83697HF/HG initializing
[   29.927250] w83697hf/hg WDT: Looking for watchdog at address 0x2e
[   29.927268] w83697hf/hg WDT: watchdog not found at address 0x2e
[   29.927271] w83697hf/hg WDT: No W83697HF/HG could be found
[   29.927272] initcall wdt_init+0x0/0x1c9 returned -5 after 0 msecs
[   29.927275] initcall wdt_init+0x0/0x1c9 returned with error code -5 
[   29.927276] calling  w83977f_wdt_init+0x0/0x116
[   29.927278] W83977F WDT: W83977F WDT driver, v1.00
[   29.927280] W83977F WDT: cannot register miscdev on minor=130 (err=-16)
[   29.927283] initcall w83977f_wdt_init+0x0/0x116 returned -16 after 0 msecs
[   29.927286] initcall w83977f_wdt_init+0x0/0x116 returned with error code -16 
[   29.927288] calling  zf_init+0x0/0x160
[   29.927289] machzwd: MachZ ZF-Logic Watchdog driver initializing.
[   29.927292] machzwd: no ZF-Logic found
[   29.927293] initcall zf_init+0x0/0x160 returned -19 after 0 msecs
[   29.927296] calling  watchdog_init+0x0/0xb5
[   29.927298] epx_c3: cannot register miscdev on minor=130 (err=-16)
[   29.927301] initcall watchdog_init+0x0/0xb5 returned -16 after 0 msecs
[   29.927303] initcall watchdog_init+0x0/0xb5 returned with error code -16 
[   29.927305] calling  watchdog_init+0x0/0xb5
[   29.927307] SoftDog: cannot register miscdev on minor=130 (err=-16)
[   29.927309] initcall watchdog_init+0x0/0xb5 returned -16 after 0 msecs
[   29.927311] initcall watchdog_init+0x0/0xb5 returned with error code -16 
[   29.927313] calling  telephony_init+0x0/0x4c
[   29.927314] Linux telephony interface: v1.00
[   29.927320] initcall telephony_init+0x0/0x4c returned 0 after 0 msecs
[   29.927322] calling  dm_init+0x0/0x49
[   29.927848] device-mapper: uevent: version 1.0.3
[   29.928089] device: 'device-mapper': device_add
[   29.928134] PM: Adding info for No Bus:device-mapper
[   29.928224] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   29.928227] initcall dm_init+0x0/0x49 returned 0 after 0 msecs
[   29.928229] calling  dm_crypt_init+0x0/0x69
[   29.928404] initcall dm_crypt_init+0x0/0x69 returned 0 after 0 msecs
[   29.928407] calling  dm_delay_init+0x0/0xc0
[   29.928677] initcall dm_delay_init+0x0/0xc0 returned 0 after 0 msecs
[   29.928679] calling  dm_snapshot_init+0x0/0x1ef
[   29.929205] initcall dm_snapshot_init+0x0/0x1ef returned 0 after 0 msecs
[   29.929208] calling  dm_mirror_init+0x0/0x2f
[   29.929220] initcall dm_mirror_init+0x0/0x2f returned 0 after 0 msecs
[   29.929222] calling  dm_dirty_log_init+0x0/0x59
[   29.929234] initcall dm_dirty_log_init+0x0/0x59 returned 0 after 0 msecs
[   29.929236] calling  hci_usb_init+0x0/0x54
[   29.929237] Bluetooth: HCI USB driver ver 2.10
[   29.929243] bus: 'usb': add driver hci_usb
[   29.929364] usbcore: registered new interface driver hci_usb
[   29.929368] initcall hci_usb_init+0x0/0x54 returned 0 after 0 msecs
[   29.929371] calling  vhci_init+0x0/0x5b
[   29.929372] Bluetooth: Virtual HCI driver ver 1.2
[   29.929376] device: 'vhci': device_add
[   29.929406] PM: Adding info for No Bus:vhci
[   29.929517] initcall vhci_init+0x0/0x5b returned 0 after 0 msecs
[   29.929519] calling  hci_uart_init+0x0/0xdd
[   29.929520] Bluetooth: HCI UART driver ver 2.2
[   29.929523] initcall hci_uart_init+0x0/0xdd returned 0 after 0 msecs
[   29.929525] calling  bcm203x_init+0x0/0x54
[   29.929526] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[   29.929529] bus: 'usb': add driver bcm203x
[   29.929654] usbcore: registered new interface driver bcm203x
[   29.929659] initcall bcm203x_init+0x0/0x54 returned 0 after 0 msecs
[   29.929661] calling  bpa10x_init+0x0/0x30
[   29.929662] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[   29.929664] bus: 'usb': add driver bpa10x
[   29.929785] usbcore: registered new interface driver bpa10x
[   29.929790] initcall bpa10x_init+0x0/0x30 returned 0 after 0 msecs
[   29.929792] calling  isdn_init+0x0/0x326
[   29.930983] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2
[   29.930988] initcall isdn_init+0x0/0x326 returned 0 after 1 msecs
[   29.930990] calling  isdn_bsdcomp_init+0x0/0x2f
[   29.930991] PPP BSD Compression module registered
[   29.930993] initcall isdn_bsdcomp_init+0x0/0x2f returned 0 after 0 msecs
[   29.930995] calling  kcapi_init+0x0/0x98
[   29.931053] CAPI Subsystem Rev 1.1.2.8
[   29.931054] initcall kcapi_init+0x0/0x98 returned 0 after 0 msecs
[   29.931057] calling  capi_init+0x0/0x2aa
[   29.931063] device class 'capi': registering
[   29.931188] device: 'capi': device_add
[   29.931232] PM: Adding info for No Bus:capi
[   29.931351] device: 'capi0': device_add
[   29.931489] PM: Adding info for No Bus:capi0
[   29.931587] device: 'capi1': device_add
[   29.931630] PM: Adding info for No Bus:capi1
[   29.931738] device: 'capi2': device_add
[   29.931772] PM: Adding info for No Bus:capi2
[   29.931870] device: 'capi3': device_add
[   29.931904] PM: Adding info for No Bus:capi3
[   29.931994] device: 'capi4': device_add
[   29.932028] PM: Adding info for No Bus:capi4
[   29.932132] device: 'capi5': device_add
[   29.932173] PM: Adding info for No Bus:capi5
[   29.932267] device: 'capi6': device_add
[   29.932301] PM: Adding info for No Bus:capi6
[   29.932391] device: 'capi7': device_add
[   29.932425] PM: Adding info for No Bus:capi7
[   29.932538] device: 'capi8': device_add
[   29.932579] PM: Adding info for No Bus:capi8
[   29.932678] device: 'capi9': device_add
[   29.932726] PM: Adding info for No Bus:capi9
[   29.932826] device: 'capi10': device_add
[   29.932878] PM: Adding info for No Bus:capi10
[   29.932982] device: 'capi11': device_add
[   29.933019] PM: Adding info for No Bus:capi11
[   29.933110] device: 'capi12': device_add
[   29.933150] PM: Adding info for No Bus:capi12
[   29.933241] device: 'capi13': device_add
[   29.933274] PM: Adding info for No Bus:capi13
[   29.933383] device: 'capi14': device_add
[   29.933417] PM: Adding info for No Bus:capi14
[   29.933517] device: 'capi15': device_add
[   29.933551] PM: Adding info for No Bus:capi15
[   29.933642] device: 'capi16': device_add
[   29.933683] PM: Adding info for No Bus:capi16
[   29.933804] device: 'capi17': device_add
[   29.933839] PM: Adding info for No Bus:capi17
[   29.933933] device: 'capi18': device_add
[   29.933967] PM: Adding info for No Bus:capi18
[   29.934057] device: 'capi19': device_add
[   29.934091] PM: Adding info for No Bus:capi19
[   29.934194] device: 'capi20': device_add
[   29.934235] PM: Adding info for No Bus:capi20
[   29.934325] device: 'capi21': device_add
[   29.934360] PM: Adding info for No Bus:capi21
[   29.934459] device: 'capi22': device_add
[   29.934494] PM: Adding info for No Bus:capi22
[   29.934597] device: 'capi23': device_add
[   29.934647] PM: Adding info for No Bus:capi23
[   29.934745] device: 'capi24': device_add
[   29.934779] PM: Adding info for No Bus:capi24
[   29.934870] device: 'capi25': device_add
[   29.934904] PM: Adding info for No Bus:capi25
[   29.935022] device: 'capi26': device_add
[   29.935057] PM: Adding info for No Bus:capi26
[   29.935151] device: 'capi27': device_add
[   29.935193] PM: Adding info for No Bus:capi27
[   29.935284] device: 'capi28': device_add
[   29.935318] PM: Adding info for No Bus:capi28
[   29.935422] device: 'capi29': device_add
[   29.935457] PM: Adding info for No Bus:capi29
[   29.935551] device: 'capi30': device_add
[   29.935585] PM: Adding info for No Bus:capi30
[   29.935675] device: 'capi31': device_add
[   29.935717] PM: Adding info for No Bus:capi31
[   29.935833] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
[   29.935836] initcall capi_init+0x0/0x2aa returned 0 after 4 msecs
[   29.935838] calling  capifs_init+0x0/0xd4
[   29.935901] capifs: Rev 1.1.2.3
[   29.935903] initcall capifs_init+0x0/0xd4 returned 0 after 0 msecs
[   29.935905] calling  divadidd_init+0x0/0xf4
[   29.935907] Eicon DIVA - DIDD table (http://www.melware.net)
[   29.935908] divadidd: Rel:2.0  Rev:1.13.6.4  Build:102-51(local)
[   29.935935] initcall divadidd_init+0x0/0xf4 returned 0 after 0 msecs
[   29.935938] calling  divas_init+0x0/0x16d
[   29.935939] Eicon DIVA Server driver (http://www.melware.net)
[   29.935940] divas: Rel:2.0  Rev:1.55.4.6  Build: 102-52(local)
[   29.935942] divas: support for: BRI/PCI PRI/PCI adapters
[   29.935973] bus: 'pci': add driver divas
[   29.936133] divas: started with major 247
[   29.936135] initcall divas_init+0x0/0x16d returned 0 after 0 msecs
[   29.936137] calling  divert_init+0x0/0x64
[   29.936147] dss1_divert module successfully installed
[   29.936149] initcall divert_init+0x0/0x64 returned 0 after 0 msecs
[   29.936151] calling  HiSax_init+0x0/0x35d
[   29.936152] HiSax: Linux Driver for passive ISDN cards
[   29.936153] HiSax: Version 3.5 (kernel)
[   29.936154] HiSax: Layer1 Revision 2.46.2.5
[   29.936156] HiSax: Layer2 Revision 2.30.2.4
[   29.936157] HiSax: TeiMgr Revision 2.20.2.3
[   29.936158] HiSax: Layer3 Revision 2.22.2.3
[   29.936159] HiSax: LinkLayer Revision 2.59.2.4
[   29.936179] HiSax: Total 1 card defined
[   29.936206] HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
[   29.936208] Gazel: Driver Revision 2.19.2.4
[   29.936209] Gazel: ISA PnP card automatic recognition
[   29.936213] Gazel: Card ISA R647/R648 found
[   29.936214] Gazel: config irq:15 isac:0x8180  cfg:0xC180
[   29.936215] Gazel: hscx A:0x180  hscx B:0x4180
[   29.986800] Gazel: ISAC version (ff): 2085 V2.3
[   29.986803] Gazel: HSCX version A: ???  B: ???
[   29.986804] Gazel: wrong HSCX versions check IO address
[   29.986858] HiSax: Card Gazel not installed !
[   29.986860] initcall HiSax_init+0x0/0x35d returned -19 after 48 msecs
[   29.986862] calling  st5481_usb_init+0x0/0x58
[   29.986863] hisax_st5481: ST5481 USB ISDN driver $Revision: 2.4.2.3 $
[   29.986877] bus: 'usb': add driver st5481_usb
[   29.986999] usbcore: registered new interface driver st5481_usb
[   29.987004] initcall st5481_usb_init+0x0/0x58 returned 0 after 0 msecs
[   29.987006] calling  hfc_usb_mod_init+0x0/0x8a
[   29.987008] HFC-S USB: driver module revision 2.3.2.24 date 2007/10/14 loaded, (debug=0)
[   29.987011] bus: 'usb': add driver hfc_usb
[   29.987132] usbcore: registered new interface driver hfc_usb
[   29.987136] initcall hfc_usb_mod_init+0x0/0x8a returned 0 after 0 msecs
[   29.987138] calling  hfc4s8s_module_init+0x0/0x62
[   29.987140] HFC-4S/8S: Layer 1 driver module for HFC-4S/8S isdn chips, Revision: 1.10
[   29.987141] HFC-4S/8S: (C) 2003 Cornelius Consult, www.cornelius-consult.de
[   29.987145] bus: 'pci': add driver hfc4s8s_l1
[   29.987270] HFC-4S/8S: found 0 cards
[   29.987272] initcall hfc4s8s_module_init+0x0/0x62 returned 0 after 0 msecs
[   29.987274] calling  hisax_isac_init+0x0/0x56
[   29.987275] hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
[   29.987280] initcall hisax_isac_init+0x0/0x56 returned 0 after 0 msecs
[   29.987282] calling  hisax_fcpcipnp_init+0x0/0x59
[   29.987284] hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
[   29.987287] bus: 'pci': add driver fcpci
[   29.987422] pnp: the driver 'fcpnp' has been registered
[   29.987425] bus: 'pnp': add driver fcpnp
[   29.987561] initcall hisax_fcpcipnp_init+0x0/0x59 returned 0 after 0 msecs
[   29.987564] calling  init_ladder+0x0/0x12
[   29.987572] cpuidle: using governor ladder
[   29.987574] initcall init_ladder+0x0/0x12 returned 0 after 0 msecs
[   29.987576] calling  init_menu+0x0/0x12
[   29.987578] cpuidle: using governor menu
[   29.987579] initcall init_menu+0x0/0x12 returned 0 after 0 msecs
[   29.987581] calling  mmc_blk_init+0x0/0x27
[   29.987585] bus: 'mmc': add driver mmcblk
[   29.987683] initcall mmc_blk_init+0x0/0x27 returned 0 after 0 msecs
[   29.987685] calling  mmc_test_init+0x0/0x12
[   29.987687] bus: 'mmc': add driver mmc_test
[   29.987784] initcall mmc_test_init+0x0/0x12 returned 0 after 0 msecs
[   29.987787] calling  sdio_uart_init+0x0/0xf2
[   29.987804] bus: 'sdio': add driver sdio_uart
[   29.987916] initcall sdio_uart_init+0x0/0xf2 returned 0 after 0 msecs
[   29.987919] calling  sdhci_drv_init+0x0/0x24
[   29.987920] sdhci: Secure Digital Host Controller Interface driver
[   29.987921] sdhci: Copyright(c) Pierre Ossman
[   29.987922] initcall sdhci_drv_init+0x0/0x24 returned 0 after 0 msecs
[   29.987925] calling  tifm_sd_init+0x0/0x12
[   29.987927] bus: 'tifm': add driver tifm_sd
[   29.988026] initcall tifm_sd_init+0x0/0x12 returned 0 after 0 msecs
[   29.988028] calling  mmc_spi_init+0x0/0x12
[   29.988032] bus: 'spi': add driver mmc_spi
[   29.988143] initcall mmc_spi_init+0x0/0x12 returned 0 after 0 msecs
[   29.988146] calling  pca9532_init+0x0/0x14
[   29.988153] bus: 'i2c': add driver pca9532
[   29.988294] i2c-core: driver [pca9532] registered
[   29.988297] initcall pca9532_init+0x0/0x14 returned 0 after 0 msecs
[   29.988300] calling  pca955x_leds_init+0x0/0x14
[   29.988302] bus: 'i2c': add driver leds-pca955x
[   29.988408] i2c-core: driver [leds-pca955x] registered
[   29.988411] initcall pca955x_leds_init+0x0/0x14 returned 0 after 0 msecs
[   29.988413] calling  heartbeat_trig_init+0x0/0x12
[   29.988436] initcall heartbeat_trig_init+0x0/0x12 returned 0 after 0 msecs
[   29.988439] calling  defon_trig_init+0x0/0x12
[   29.988442] initcall defon_trig_init+0x0/0x12 returned 0 after 0 msecs
[   29.988444] calling  ib_core_init+0x0/0x44
[   29.988445] device class 'infiniband': registering
[   29.988559] initcall ib_core_init+0x0/0x44 returned 0 after 0 msecs
[   29.988561] calling  ib_mad_init_module+0x0/0xa3
[   29.988773] initcall ib_mad_init_module+0x0/0xa3 returned 0 after 0 msecs
[   29.988776] calling  ib_sa_init+0x0/0x9b
[   29.988840] initcall ib_sa_init+0x0/0x9b returned 0 after 0 msecs
[   29.988842] calling  ib_cm_init+0x0/0x159
[   29.988856] device class 'infiniband_cm': registering
[   29.989047] initcall ib_cm_init+0x0/0x159 returned 0 after 0 msecs
[   29.989050] calling  iw_cm_init+0x0/0x33
[   29.989094] initcall iw_cm_init+0x0/0x33 returned 0 after 0 msecs
[   29.989098] calling  addr_init+0x0/0x49
[   29.989162] initcall addr_init+0x0/0x49 returned 0 after 0 msecs
[   29.989164] calling  cma_init+0x0/0xe7
[   29.989218] initcall cma_init+0x0/0xe7 returned 0 after 0 msecs
[   29.989221] calling  ib_umad_init+0x0/0xcc
[   29.989224] device class 'infiniband_mad': registering
[   29.989327] initcall ib_umad_init+0x0/0xcc returned 0 after 0 msecs
[   29.989330] calling  ib_uverbs_init+0x0/0x151
[   29.989333] device class 'infiniband_verbs': registering
[   29.989467] initcall ib_uverbs_init+0x0/0x151 returned 0 after 0 msecs
[   29.989470] calling  ib_ucm_init+0x0/0xa6
[   29.989475] initcall ib_ucm_init+0x0/0xa6 returned 0 after 0 msecs
[   29.989477] calling  ucma_init+0x0/0x54
[   29.989490] device: 'rdma_cm': device_add
[   29.989555] PM: Adding info for No Bus:rdma_cm
[   29.989649] initcall ucma_init+0x0/0x54 returned 0 after 0 msecs
[   29.989651] calling  mthca_init+0x0/0x153
[   29.989701] bus: 'pci': add driver ib_mthca
[   29.989849] initcall mthca_init+0x0/0x153 returned 0 after 0 msecs
[   29.989852] calling  infinipath_init+0x0/0xc5
[   29.989874] bus: 'pci': add driver ib_ipath
[   29.990005] initcall infinipath_init+0x0/0xc5 returned 0 after 0 msecs
[   29.990007] calling  mlx4_ib_init+0x0/0x12
[   29.990016] initcall mlx4_ib_init+0x0/0x12 returned 0 after 0 msecs
[   29.990018] calling  nes_init_module+0x0/0x143
[   29.990196] bus: 'pci': add driver iw_nes
[   29.990371] initcall nes_init_module+0x0/0x143 returned 0 after 0 msecs
[   29.990374] calling  srp_init_module+0x0/0xf2
[   29.990379] device class 'infiniband_srp': registering
[   29.990483] initcall srp_init_module+0x0/0xf2 returned 0 after 0 msecs
[   29.990485] calling  iser_init+0x0/0x125
[   29.990674] device: 'iser': device_add
[   29.990688] PM: Adding info for No Bus:iser
[   29.990797] iscsi: registered transport (iser)
[   29.990799] initcall iser_init+0x0/0x125 returned 0 after 0 msecs
[   29.990802] calling  dcdrbu_init+0x0/0x156
[   29.990806] Registering platform device 'dell_rbu'. Parent at platform
[   29.990808] device: 'dell_rbu': device_add
[   29.990817] bus: 'platform': add device dell_rbu
[   29.990832] PM: Adding info for platform:dell_rbu
[   29.990940] initcall dcdrbu_init+0x0/0x156 returned 0 after 0 msecs
[   29.990943] calling  hifn_init+0x0/0xb3
[   29.990947] bus: 'pci': add driver hifn795x
[   29.991094] Driver for HIFN 795x crypto accelerator chip has been successfully registered.
[   29.991096] initcall hifn_init+0x0/0xb3 returned 0 after 0 msecs
[   29.991099] calling  dmatest_init+0x0/0x28
[   29.991102] initcall dmatest_init+0x0/0x28 returned 0 after 0 msecs
[   29.991104] calling  ioat_init_module+0x0/0x1b
[   29.991107] bus: 'pci': add driver ioatdma
[   29.991234] initcall ioat_init_module+0x0/0x1b returned 0 after 0 msecs
[   29.991237] calling  dca_init+0x0/0x20
[   29.991238] dca service started, version 1.4
[   29.991240] device class 'dca': registering
[   29.991332] initcall dca_init+0x0/0x20 returned 0 after 0 msecs
[   29.991335] calling  hid_init+0x0/0x8
[   29.991336] initcall hid_init+0x0/0x8 returned 0 after 0 msecs
[   29.991338] calling  hid_init+0x0/0x61
[   29.991346] bus: 'usb': add driver hiddev
[   29.991480] usbcore: registered new interface driver hiddev
[   29.991485] bus: 'usb': add driver usbhid
[   29.991593] usbcore: registered new interface driver usbhid
[   29.991597] usbhid: v2.6:USB HID core driver
[   29.991599] initcall hid_init+0x0/0x61 returned 0 after 0 msecs
[   29.991601] calling  usb_mouse_init+0x0/0x38
[   29.991604] bus: 'usb': add driver usbmouse
[   29.991712] usbcore: registered new interface driver usbmouse
[   29.991716] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[   29.991718] initcall usb_mouse_init+0x0/0x38 returned 0 after 0 msecs
[   29.991721] calling  oprofile_init+0x0/0x63
[   29.991725] Registering sysdev class 'oprofile'
[   29.991832] Registering sys device of class 'oprofile'
[   29.991837] Registering sys device 'oprofile0'
[   29.991930] oprofile: using NMI interrupt.
[   29.991936] initcall oprofile_init+0x0/0x63 returned 0 after 0 msecs
[   29.991938] calling  sysctl_core_init+0x0/0x25
[   29.991962] initcall sysctl_core_init+0x0/0x25 returned 0 after 0 msecs
[   29.991965] calling  flow_cache_init+0x0/0x1b7
[   29.992147] initcall flow_cache_init+0x0/0x1b7 returned 0 after 0 msecs
[   29.992150] calling  llc_init+0x0/0x20
[   29.992153] initcall llc_init+0x0/0x20 returned 0 after 0 msecs
[   29.992155] calling  llc2_init+0x0/0xca
[   29.992184] NET: Registered protocol family 26
[   29.992186] initcall llc2_init+0x0/0xca returned 0 after 0 msecs
[   29.992188] calling  snap_init+0x0/0x31
[   29.992199] initcall snap_init+0x0/0x31 returned 0 after 0 msecs
[   29.992202] calling  blackhole_module_init+0x0/0x12
[   29.992205] initcall blackhole_module_init+0x0/0x12 returned 0 after 0 msecs
[   29.992207] calling  cbq_module_init+0x0/0x12
[   29.992209] initcall cbq_module_init+0x0/0x12 returned 0 after 0 msecs
[   29.992212] calling  hfsc_init+0x0/0x12
[   29.992214] initcall hfsc_init+0x0/0x12 returned 0 after 0 msecs
[   29.992216] calling  red_module_init+0x0/0x12
[   29.992218] initcall red_module_init+0x0/0x12 returned 0 after 0 msecs
[   29.992221] calling  gred_module_init+0x0/0x12
[   29.992223] initcall gred_module_init+0x0/0x12 returned 0 after 0 msecs
[   29.992225] calling  sfq_module_init+0x0/0x12
[   29.992227] initcall sfq_module_init+0x0/0x12 returned 0 after 0 msecs
[   29.992230] calling  tbf_module_init+0x0/0x12
[   29.992232] initcall tbf_module_init+0x0/0x12 returned 0 after 0 msecs
[   29.992234] calling  prio_module_init+0x0/0x12
[   29.992236] initcall prio_module_init+0x0/0x12 returned 0 after 0 msecs
[   29.992239] calling  init_u32+0x0/0x2e
[   29.992240] u32 classifier
[   29.992241]     input device check on 
[   29.992248] initcall init_u32+0x0/0x2e returned 0 after 0 msecs
[   29.992250] calling  init_route4+0x0/0x12
[   29.992252] initcall init_route4+0x0/0x12 returned 0 after 0 msecs
[   29.992254] calling  init_rsvp+0x0/0x12
[   29.992256] initcall init_rsvp+0x0/0x12 returned 0 after 0 msecs
[   29.992259] calling  init_tcindex+0x0/0x12
[   29.992261] initcall init_tcindex+0x0/0x12 returned 0 after 0 msecs
[   29.992263] calling  init_basic+0x0/0x12
[   29.992265] initcall init_basic+0x0/0x12 returned 0 after 0 msecs
[   29.992268] calling  cls_flow_init+0x0/0x12
[   29.992270] initcall cls_flow_init+0x0/0x12 returned 0 after 0 msecs
[   29.992272] calling  init_em_meta+0x0/0x12
[   29.992279] initcall init_em_meta+0x0/0x12 returned 0 after 0 msecs
[   29.992281] calling  init_em_text+0x0/0x12
[   29.992283] initcall init_em_text+0x0/0x12 returned 0 after 0 msecs
[   29.992285] calling  nfnetlink_init+0x0/0x5d
[   29.992286] Netfilter messages via NETLINK v0.30.
[   29.992298] initcall nfnetlink_init+0x0/0x5d returned 0 after 0 msecs
[   29.992300] calling  nfnetlink_log_init+0x0/0xa5
[   29.992320] initcall nfnetlink_log_init+0x0/0xa5 returned 0 after 0 msecs
[   29.992322] calling  nf_conntrack_standalone_init+0x0/0xe4
[   29.992357] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   29.992717] initcall nf_conntrack_standalone_init+0x0/0xe4 returned 0 after 0 msecs
[   29.992719] calling  ctnetlink_init+0x0/0x76
[   29.992720] ctnetlink v0.93: registering with nfnetlink.
[   29.992723] initcall ctnetlink_init+0x0/0x76 returned 0 after 0 msecs
[   29.992725] calling  nf_conntrack_ftp_init+0x0/0x1a0
[   29.992736] initcall nf_conntrack_ftp_init+0x0/0x1a0 returned 0 after 0 msecs
[   29.992738] calling  xt_init+0x0/0xe8
[   29.992748] initcall xt_init+0x0/0xe8 returned 0 after 0 msecs
[   29.992750] calling  tcpudp_mt_init+0x0/0x17
[   29.992760] initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 msecs
[   29.992762] calling  mark_tg_init+0x0/0x17
[   29.992766] initcall mark_tg_init+0x0/0x17 returned 0 after 0 msecs
[   29.992768] calling  nflog_tg_init+0x0/0x17
[   29.992771] initcall nflog_tg_init+0x0/0x17 returned 0 after 0 msecs
[   29.992773] calling  conntrack_mt_init+0x0/0x17
[   29.992776] initcall conntrack_mt_init+0x0/0x17 returned 0 after 0 msecs
[   29.992778] calling  mark_mt_init+0x0/0x17
[   29.992781] initcall mark_mt_init+0x0/0x17 returned 0 after 0 msecs
[   29.992783] calling  policy_mt_init+0x0/0x17
[   29.992785] initcall policy_mt_init+0x0/0x17 returned 0 after 0 msecs
[   29.992787] calling  state_mt_init+0x0/0x17
[   29.992789] initcall state_mt_init+0x0/0x17 returned 0 after 0 msecs
[   29.992791] calling  sysctl_ipv4_init+0x0/0x4e
[   29.992803] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 0 msecs
[   29.992805] calling  ah4_init+0x0/0x68
[   29.992808] initcall ah4_init+0x0/0x68 returned 0 after 0 msecs
[   29.992810] calling  xfrm4_beet_init+0x0/0x17
[   29.992812] initcall xfrm4_beet_init+0x0/0x17 returned 0 after 0 msecs
[   29.992814] calling  xfrm4_transport_init+0x0/0x17
[   29.992816] initcall xfrm4_transport_init+0x0/0x17 returned 0 after 0 msecs
[   29.992819] calling  xfrm4_mode_tunnel_init+0x0/0x17
[   29.992821] initcall xfrm4_mode_tunnel_init+0x0/0x17 returned 0 after 0 msecs
[   29.992824] calling  ipv4_netfilter_init+0x0/0x17
[   29.992832] initcall ipv4_netfilter_init+0x0/0x17 returned 0 after 0 msecs
[   29.992834] calling  ip_vs_init+0x0/0xa5
[   29.992867] IPVS: Registered protocols (TCP, UDP, ESP)
[   29.993052] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[   29.993053] IPVS: Each connection entry needs 264 bytes at least
[   29.993103] IPVS: ipvs loaded.
[   29.993105] initcall ip_vs_init+0x0/0xa5 returned 0 after 0 msecs
[   29.993107] calling  ip_vs_wrr_init+0x0/0x12
[   29.993113] IPVS: [wrr] scheduler registered.
[   29.993115] initcall ip_vs_wrr_init+0x0/0x12 returned 0 after 0 msecs
[   29.993117] calling  ip_vs_wlc_init+0x0/0x12
[   29.993119] IPVS: [wlc] scheduler registered.
[   29.993120] initcall ip_vs_wlc_init+0x0/0x12 returned 0 after 0 msecs
[   29.993122] calling  ip_vs_lblc_init+0x0/0x47
[   29.993127] IPVS: [lblc] scheduler registered.
[   29.993129] initcall ip_vs_lblc_init+0x0/0x47 returned 0 after 0 msecs
[   29.993131] calling  ip_vs_dh_init+0x0/0x12
[   29.993132] IPVS: [dh] scheduler registered.
[   29.993134] initcall ip_vs_dh_init+0x0/0x12 returned 0 after 0 msecs
[   29.993136] calling  ip_vs_sh_init+0x0/0x12
[   29.993137] IPVS: [sh] scheduler registered.
[   29.993139] initcall ip_vs_sh_init+0x0/0x12 returned 0 after 0 msecs
[   29.993141] calling  ip_vs_sed_init+0x0/0x12
[   29.993142] IPVS: [sed] scheduler registered.
[   29.993144] initcall ip_vs_sed_init+0x0/0x12 returned 0 after 0 msecs
[   29.993146] calling  ip_vs_ftp_init+0x0/0x93
[   29.993160] IPVS: ftp: loaded support on port[0] = 21
[   29.993162] initcall ip_vs_ftp_init+0x0/0x93 returned 0 after 0 msecs
[   29.993164] calling  inet_diag_init+0x0/0x69
[   29.993173] initcall inet_diag_init+0x0/0x69 returned 0 after 0 msecs
[   29.993175] calling  tcp_diag_init+0x0/0x12
[   29.993183] initcall tcp_diag_init+0x0/0x12 returned 0 after 0 msecs
[   29.993185] calling  bictcp_register+0x0/0x12
[   29.993187] TCP bic registered
[   29.993188] initcall bictcp_register+0x0/0x12 returned 0 after 0 msecs
[   29.993191] calling  cubictcp_register+0x0/0x68
[   29.993192] TCP cubic registered
[   29.993193] initcall cubictcp_register+0x0/0x68 returned 0 after 0 msecs
[   29.993196] calling  tcp_westwood_register+0x0/0x12
[   29.993197] TCP westwood registered
[   29.993199] initcall tcp_westwood_register+0x0/0x12 returned 0 after 0 msecs
[   29.993201] calling  hstcp_register+0x0/0x12
[   29.993202] TCP highspeed registered
[   29.993203] initcall hstcp_register+0x0/0x12 returned 0 after 0 msecs
[   29.993206] calling  htcp_register+0x0/0x12
[   29.993207] TCP htcp registered
[   29.993208] initcall htcp_register+0x0/0x12 returned 0 after 0 msecs
[   29.993210] calling  tcp_vegas_register+0x0/0x14
[   29.993212] TCP vegas registered
[   29.993213] initcall tcp_vegas_register+0x0/0x14 returned 0 after 0 msecs
[   29.993215] calling  tcp_veno_register+0x0/0x14
[   29.993217] TCP veno registered
[   29.993218] initcall tcp_veno_register+0x0/0x14 returned 0 after 0 msecs
[   29.993220] calling  tcp_yeah_register+0x0/0x14
[   29.993221] TCP yeah registered
[   29.993223] initcall tcp_yeah_register+0x0/0x14 returned 0 after 0 msecs
[   29.993225] calling  tcp_illinois_register+0x0/0x12
[   29.993226] TCP illinois registered
[   29.993228] initcall tcp_illinois_register+0x0/0x12 returned 0 after 0 msecs
[   29.993230] calling  inet6_init+0x0/0x342
[   29.994194] NET: Registered protocol family 10
[   29.995812] initcall inet6_init+0x0/0x342 returned 0 after 2 msecs
[   29.995814] calling  ah6_init+0x0/0x68
[   29.995817] initcall ah6_init+0x0/0x68 returned 0 after 0 msecs
[   29.995819] calling  esp6_init+0x0/0x68
[   29.995821] initcall esp6_init+0x0/0x68 returned 0 after 0 msecs
[   29.995823] calling  tunnel6_init+0x0/0x68
[   29.995826] initcall tunnel6_init+0x0/0x68 returned 0 after 0 msecs
[   29.995828] calling  xfrm6_mode_tunnel_init+0x0/0x17
[   29.995830] initcall xfrm6_mode_tunnel_init+0x0/0x17 returned 0 after 0 msecs
[   29.995832] calling  nf_conntrack_l3proto_ipv6_init+0x0/0x11a
[   29.995868] initcall nf_conntrack_l3proto_ipv6_init+0x0/0x11a returned 0 after 0 msecs
[   29.995871] calling  ip6_tunnel_init+0x0/0xa2
[   29.995908] device: 'ip6tnl0': device_add
[   29.996006] PM: Adding info for No Bus:ip6tnl0
[   29.996299] initcall ip6_tunnel_init+0x0/0xa2 returned 0 after 0 msecs
[   29.996302] calling  packet_init+0x0/0x47
[   29.996304] NET: Registered protocol family 17
[   29.996323] initcall packet_init+0x0/0x47 returned 0 after 0 msecs
[   29.996325] calling  ipsec_pfkey_init+0x0/0x8c
[   29.996327] NET: Registered protocol family 15
[   29.996338] initcall ipsec_pfkey_init+0x0/0x8c returned 0 after 0 msecs
[   29.996340] calling  atalk_init+0x0/0x8d
[   29.996342] NET: Registered protocol family 5
[   35.597887] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[   35.605870] bus: 'serio': really_probe: probing driver atkbd with device serio0
[   35.635422] device: 'input0': device_add
[   35.637944] initcall atalk_init+0x0/0x8d returned 0 after 5380 msecs
[   35.637947] calling  nr_proto_init+0x0/0x259
[   35.637964] device: 'nr0': device_add
[   35.638072] PM: Adding info for No Bus:nr0
[   35.638294] device: 'nr1': device_add
[   35.638382] PM: Adding info for No Bus:nr1
[   35.638516] device: 'nr2': device_add
[   35.638598] PM: Adding info for No Bus:nr2
[   35.638746] device: 'nr3': device_add
[   35.638860] PM: Adding info for No Bus:nr3
[   35.638986] NET: Registered protocol family 6
[   35.639075] initcall nr_proto_init+0x0/0x259 returned 0 after 1 msecs
[   35.639078] calling  ax25_init+0x0/0xad
[   35.639079] NET: Registered protocol family 3
[   35.639105] initcall ax25_init+0x0/0xad returned 0 after 0 msecs
[   35.639107] calling  can_init+0x0/0xf3
[   35.639108] can: controller area network core (rev 20071116 abi 8)
[   35.639379] NET: Registered protocol family 29
[   35.639383] initcall can_init+0x0/0xf3 returned 0 after 0 msecs
[   35.639386] calling  raw_module_init+0x0/0x3d
[   35.639387] can: raw protocol (rev 20071116)
[   35.639395] initcall raw_module_init+0x0/0x3d returned 0 after 0 msecs
[   35.639397] calling  irlan_init+0x0/0x23d
[   35.639422] device: 'irlan0': device_add
[   35.639510] PM: Adding info for No Bus:irlan0
[   35.639827] initcall irlan_init+0x0/0x23d returned 0 after 0 msecs
[   35.639830] calling  ircomm_init+0x0/0x9a
[   35.639836] IrCOMM protocol (Dag Brattli)
[   35.639838] initcall ircomm_init+0x0/0x9a returned 0 after 0 msecs
[   35.639840] calling  ircomm_tty_init+0x0/0x134
[   35.639853] device: 'ircomm0': device_add
[   35.640120] PM: Adding info for No Bus:ircomm0
[   35.640218] device: 'ircomm1': device_add
[   35.640255] PM: Adding info for No Bus:ircomm1
[   35.640346] device: 'ircomm2': device_add
[   35.640387] PM: Adding info for No Bus:ircomm2
[   35.640477] device: 'ircomm3': device_add
[   35.640512] PM: Adding info for No Bus:ircomm3
[   35.640602] device: 'ircomm4': device_add
[   35.640646] PM: Adding info for No Bus:ircomm4
[   35.640740] device: 'ircomm5': device_add
[   35.640775] PM: Adding info for No Bus:ircomm5
[   35.640865] device: 'ircomm6': device_add
[   35.640907] PM: Adding info for No Bus:ircomm6
[   35.640997] device: 'ircomm7': device_add
[   35.641032] PM: Adding info for No Bus:ircomm7
[   35.641121] device: 'ircomm8': device_add
[   35.641156] PM: Adding info for No Bus:ircomm8
[   35.641249] device: 'ircomm9': device_add
[   35.641291] PM: Adding info for No Bus:ircomm9
[   35.641381] device: 'ircomm10': device_add
[   35.641416] PM: Adding info for No Bus:ircomm10
[   35.641506] device: 'ircomm11': device_add
[   35.641541] PM: Adding info for No Bus:ircomm11
[   35.641632] device: 'ircomm12': device_add
[   35.641667] PM: Adding info for No Bus:ircomm12
[   35.641769] device: 'ircomm13': device_add
[   35.641811] PM: Adding info for No Bus:ircomm13
[   35.641911] device: 'ircomm14': device_add
[   35.641946] PM: Adding info for No Bus:ircomm14
[   35.642037] device: 'ircomm15': device_add
[   35.642072] PM: Adding info for No Bus:ircomm15
[   35.642177] device: 'ircomm16': device_add
[   35.642221] PM: Adding info for No Bus:ircomm16
[   35.642315] device: 'ircomm17': device_add
[   35.642357] PM: Adding info for No Bus:ircomm17
[   35.642447] device: 'ircomm18': device_add
[   35.642483] PM: Adding info for No Bus:ircomm18
[   35.642581] device: 'ircomm19': device_add
[   35.642616] PM: Adding info for No Bus:ircomm19
[   35.642706] device: 'ircomm20': device_add
[   35.642742] PM: Adding info for No Bus:ircomm20
[   35.642835] device: 'ircomm21': device_add
[   35.642877] PM: Adding info for No Bus:ircomm21
[   35.642975] device: 'ircomm22': device_add
[   35.643011] PM: Adding info for No Bus:ircomm22
[   35.643101] device: 'ircomm23': device_add
[   35.643146] PM: Adding info for No Bus:ircomm23
[   35.643235] device: 'ircomm24': device_add
[   35.643278] PM: Adding info for No Bus:ircomm24
[   35.643384] device: 'ircomm25': device_add
[   35.643420] PM: Adding info for No Bus:ircomm25
[   35.643509] device: 'ircomm26': device_add
[   35.643545] PM: Adding info for No Bus:ircomm26
[   35.643648] device: 'ircomm27': device_add
[   35.643684] PM: Adding info for No Bus:ircomm27
[   35.643783] device: 'ircomm28': device_add
[   35.643825] PM: Adding info for No Bus:ircomm28
[   35.643919] device: 'ircomm29': device_add
[   35.643955] PM: Adding info for No Bus:ircomm29
[   35.644044] device: 'ircomm30': device_add
[   35.644080] PM: Adding info for No Bus:ircomm30
[   35.644188] device: 'ircomm31': device_add
[   35.644225] PM: Adding info for No Bus:ircomm31
[   35.644320] initcall ircomm_tty_init+0x0/0x134 returned 0 after 4 msecs
[   35.644322] calling  l2cap_init+0x0/0xe4
[   35.644349] Bluetooth: L2CAP ver 2.11
[   35.644350] Bluetooth: L2CAP socket layer initialized
[   35.644352] initcall l2cap_init+0x0/0xe4 returned 0 after 0 msecs
[   35.644354] calling  sco_init+0x0/0xea
[   35.644364] Bluetooth: SCO (Voice Link) ver 0.6
[   35.644365] Bluetooth: SCO socket layer initialized
[   35.644367] initcall sco_init+0x0/0xea returned 0 after 0 msecs
[   35.644369] calling  rfcomm_init+0x0/0xbe
[   35.644428] Bluetooth: RFCOMM socket layer initialized
[   35.644441] Bluetooth: RFCOMM TTY layer initialized
[   35.644443] Bluetooth: RFCOMM ver 1.10
[   35.644445] initcall rfcomm_init+0x0/0xbe returned 0 after 0 msecs
[   35.644447] calling  init_sunrpc+0x0/0x5d
[   35.645207] RPC: Registered udp transport module.
[   35.645209] RPC: Registered tcp transport module.
[   35.645213] initcall init_sunrpc+0x0/0x5d returned 0 after 0 msecs
[   35.645215] calling  init_rpcsec_gss+0x0/0x38
[   35.645258] initcall init_rpcsec_gss+0x0/0x38 returned 0 after 0 msecs
[   35.645260] calling  init_kerberos_module+0x0/0x2f
[   35.645286] initcall init_kerberos_module+0x0/0x2f returned 0 after 0 msecs
[   35.645288] calling  init_spkm3_module+0x0/0x2f
[   35.645294] initcall init_spkm3_module+0x0/0x2f returned 0 after 0 msecs
[   35.645296] calling  xprt_rdma_init+0x0/0xbc
[   35.645298] RPC: Registered rdma transport module.
[   35.645302] initcall xprt_rdma_init+0x0/0xbc returned 0 after 0 msecs
[   35.645306] calling  svc_rdma_init+0x0/0x14d
[   35.645635] initcall svc_rdma_init+0x0/0x14d returned 0 after 0 msecs
[   35.645638] calling  af_rxrpc_init+0x0/0x19c
[   35.646048] NET: Registered protocol family 33
[   35.646067] initcall af_rxrpc_init+0x0/0x19c returned 0 after 0 msecs
[   35.646069] calling  rxkad_init+0x0/0x68
[   35.646163] RxRPC: Registered security type 2 'rxkad'
[   35.646165] initcall rxkad_init+0x0/0x68 returned 0 after 0 msecs
[   35.646168] calling  decnet_init+0x0/0x90
[   35.646169] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[   35.646697] DECnet: Routing cache hash table of 1024 buckets, 56Kbytes
[   35.646906] NET: Registered protocol family 12
[   35.646920] initcall decnet_init+0x0/0x90 returned 0 after 0 msecs
[   35.646923] calling  dccp_init+0x0/0x395
[   35.650032] initcall dccp_init+0x0/0x395 returned 0 after 2 msecs
[   35.650036] calling  dccp_v4_init+0x0/0x84
[   36.278390] PM: Adding info for No Bus:input0
[   36.282898] input: AT Translated Set 2 keyboard as /class/input/input0
[   36.298917] initcall dccp_v4_init+0x0/0x84 returned 0 after 618 msecs
[   36.305405] calling  dccp_v6_init+0x0/0x84
[   36.310043] initcall dccp_v6_init+0x0/0x84 returned 0 after 0 msecs
[   36.316357] calling  dccp_diag_init+0x0/0x12
[   36.320646] initcall dccp_diag_init+0x0/0x12 returned 0 after 0 msecs
[   36.327133] calling  ccid3_module_init+0x0/0x12
[   36.332000] CCID: Registered CCID 3 (TCP-Friendly Rate Control)
[   36.337936] initcall ccid3_module_init+0x0/0x12<7>evbug.c: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[   36.341921] driver: 'serio0': driver_bound: bound to device 'atkbd'
[   36.341923] bus: 'serio': really_probe: bound device serio0 to driver atkbd
[   36.363728]  returned 0 after 5 msecs
[   36.367407] calling  ccid2_module_init+0x0/0x12
[   36.372288] CCID: Registered CCID 2 (TCP-like)
[   36.376751] initcall ccid2_module_init+0x0/0x12 returned 0 after 4 msecs
[   36.383498] calling  tfrc_module_init+0x0/0x3a
[   36.388421] initcall tfrc_module_init+0x0/0x3a returned 0 after 0 msecs
[   36.395085] calling  sctp_init+0x0/0x789
[   36.400762] SCTP: Hash tables configured (established 18724 bind 18724)
[   36.442291] initcall sctp_init+0x0/0x789 returned 0 after 41 msecs
[   36.448521] calling  ieee80211_init+0x0/0xb3
[   36.452828] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   36.459454] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   36.467821] initcall ieee80211_init+0x0/0xb3 returned 0 after 14 msecs
[   36.474397] calling  ieee80211_crypto_init+0x0/0x12
[   36.479298] ieee80211_crypt: registered algorithm 'NULL'
[   36.484624] initcall ieee80211_crypto_init+0x0/0x12 returned 0 after 5 msecs
[   36.491718] calling  ieee80211_crypto_wep_init+0x0/0x12
[   36.496956] ieee80211_crypt: registered algorithm 'WEP'
[   36.502197] initcall ieee80211_crypto_wep_init+0x0/0x12 returned 0 after 4 msecs
[   36.509641] calling  ieee80211_crypto_tkip_init+0x0/0x12
[   36.514967] ieee80211_crypt: registered algorithm 'TKIP'
[   36.520293] initcall ieee80211_crypto_tkip_init+0x0/0x12 returned 0 after 5 msecs
[   36.527824] calling  tipc_init+0x0/0xb6
[   36.531683] TIPC: Activated (version 1.6.4 compiled Sep 10 2008 13:51:10)
[   36.539232] NET: Registered protocol family 30
[   36.543696] TIPC: Started in single node mode
[   36.548069] initcall tipc_init+0x0/0xb6 returned 0 after 15 msecs
[   36.554218] calling  hpet_insert_resource+0x0/0x23
[   36.559026] initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 msecs
[   36.566035] calling  update_mp_table+0x0/0x476
[   36.570495] initcall update_mp_table+0x0/0x476 returned 0 after 0 msecs
[   36.577153] calling  lapic_insert_resource+0x0/0x40
[   36.582048] initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 msecs
[   36.589139] calling  init_lapic_nmi_sysfs+0x0/0x38
[   36.593945] initcall init_lapic_nmi_sysfs+0x0/0x38 returned 0 after 0 msecs
[   36.600950] calling  ioapic_insert_resources+0x0/0x4f
[   36.606017] initcall ioapic_insert_resources+0x0/0x4f returned 0 after 0 msecs
[   36.613286] calling  io_apic_bug_finalize+0x0/0x1b
[   36.618095] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 msecs
[   36.625100] calling  check_early_ioremap_leak+0x0/0x3d
[   36.630253] ------------[ cut here ]------------
[   36.634884] WARNING: at arch/x86/mm/ioremap.c:577 check_early_ioremap_leak+0x28/0x3d()
[   36.642811] Debug warning: early ioremap leak of 1 areas detected.
[   36.649003] Pid: 1, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1
[   36.656758] Call Trace:
[   36.659229]  [<ffffffff8024ad3b>] warn_slowpath+0xae/0xd7
[   36.664643]  [<ffffffff80269872>] ? register_lock_class+0x20/0x2b5
[   36.670836]  [<ffffffff8025cf89>] ? core_kernel_text+0x9/0x44
[   36.676596]  [<ffffffff80270255>] ? __print_symbol+0x32/0x3e
[   36.682268]  [<ffffffff8024ba80>] ? printk+0x6c/0x6e
[   36.687247]  [<ffffffff802506a5>] ? insert_resource+0x38/0x48
[   36.693008]  [<ffffffff802183e1>] ? paravirt_read_tsc+0x17/0x1a
[   36.698939]  [<ffffffff80218451>] ? get_cycles+0x9/0xb
[   36.704092]  [<ffffffff8021845c>] ? read_tsc+0x9/0x1c
[   36.709159]  [<ffffffff802640a0>] ? clocksource_read+0xc/0xe
[   36.714831]  [<ffffffff8026428f>] ? getnstimeofday+0x41/0xa3
[   36.720503]  [<ffffffff802614e9>] ? ktime_set+0x9/0x32
[   36.725656]  [<ffffffff80261584>] ? timespec_to_ktime+0x1a/0x1c
[   36.731589]  [<ffffffff81277f15>] ? check_early_ioremap_leak+0x0/0x3d
[   36.738042]  [<ffffffff81277f3d>] check_early_ioremap_leak+0x28/0x3d
[   36.744408]  [<ffffffff8020a05c>] do_one_initcall+0x4c/0x151
[   36.750082]  [<ffffffff80548f42>] ? __next_cpu_nr+0x22/0x2b
[   36.755669]  [<ffffffff81261a19>] kernel_init+0x1ba/0x22b
[   36.761082]  [<ffffffff80212089>] child_rip+0xa/0x11
[   36.766060]  [<ffffffff8126185f>] ? kernel_init+0x0/0x22b
[   36.771472]  [<ffffffff8021207f>] ? child_rip+0x0/0x11
[   36.776629] ---[ end trace f0f435d790e14276 ]---
[   36.781262] please boot with early_ioremap_debug and report the dmesg.
[   36.787799] initcall check_early_ioremap_leak+0x0/0x3d returned 1 after 150 msecs
[   36.795329] initcall check_early_ioremap_leak+0x0/0x3d returned with error code 1 
[   36.802946] calling  sched_init_debug+0x0/0x24
[   36.807430] initcall sched_init_debug+0x0/0x24 returned 0 after 0 msecs
[   36.814093] calling  init_oops_id+0x0/0x28
[   36.818205] initcall init_oops_id+0x0/0x28 returned 0 after 0 msecs
[   36.824516] calling  disable_boot_consoles+0x0/0x3a
[   36.829409] initcall disable_boot_consoles+0x0/0x3a returned 0 after 0 msecs
[   36.836500] calling  pm_qos_power_init+0x0/0x61
[   36.841053] device: 'cpu_dma_latency': device_add
[   36.845981] PM: Adding info for No Bus:cpu_dma_latency
[   36.851226] device: 'network_latency': device_add
[   36.855981] PM: Adding info for No Bus:network_latency
[   36.861219] device: 'network_throughput': device_add
[   36.866225] PM: Adding info for No Bus:network_throughput
[   36.871721] initcall pm_qos_power_init+0x0/0x61 returned 0 after 29 msecs
[   36.878556] calling  taskstats_init+0x0/0x95
[   36.882858] registered taskstats version 1
[   36.886971] initcall taskstats_init+0x0/0x95 returned 0 after 3 msecs
[   36.893456] calling  random32_reseed+0x0/0x9e
[   36.897841] initcall random32_reseed+0x0/0x9e returned 0 after 0 msecs
[   36.904412] calling  pci_sysfs_init+0x0/0x4c
[   36.908953] initcall pci_sysfs_init+0x0/0x4c returned 0 after 0 msecs
[   36.915441] calling  acpi_wakeup_device_init+0x0/0xb1
[   36.920522] initcall acpi_wakeup_device_init+0x0/0xb1 returned 0 after 0 msecs
[   36.927793] calling  acpi_sleep_proc_init+0x0/0x9b
[   36.932637] initcall acpi_sleep_proc_init+0x0/0x9b returned 0 after 0 msecs
[   36.939643] calling  boot_wait_for_devices+0x0/0x19
[   36.944535] initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 msecs
[   36.951628] calling  seqgen_init+0x0/0xf
[   36.955574] initcall seqgen_init+0x0/0xf returned 0 after 0 msecs
[   36.961715] calling  scsi_complete_async_scans+0x0/0x11c
[   36.967042] initcall scsi_complete_async_scans+0x0/0x11c returned 0 after 0 msecs
[   36.974573] calling  rtc_hctosys+0x0/0x176
[   36.978686] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   36.984964] initcall rtc_hctosys+0x0/0x176 returned -19 after 5 msecs
[   36.991454] calling  memmap_init+0x0/0xa3
[   36.995570] initcall memmap_init+0x0/0xa3 returned 0 after 0 msecs
[   37.001796] calling  pci_mmcfg_late_insert_resources+0x0/0x159
[   37.007650] initcall pci_mmcfg_late_insert_resources+0x0/0x159 returned 0 after 0 msecs
[   37.015701] calling  tcp_congestion_default+0x0/0x12
[   37.020680] initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 msecs
[   37.027911] driver_probe_done: probe_count = 0
[   37.061138] kjournald starting.  Commit interval 5 seconds
[   37.066655] EXT3-fs: mounted filesystem with ordered data mode.
[   37.072609] VFS: Mounted root (ext3 filesystem) readonly.
[   37.078053] debug: unmapping init memory ffffffff81261000..ffffffff813d0000
[   37.085180] Write protecting the kernel read-only data: 14808k
[   37.116453] device: 'vcs1': device_add
[   37.116530] PM: Adding info for No Bus:vcs1
[   37.131526] device: 'vcsa1': device_add
[   37.131586] PM: Adding info for No Bus:vcsa1
[   37.382360] device: 'vcs1': device_unregister
[   37.382363] PM: Removing info for No Bus:vcs1
[   37.382555] device: 'vcs1': device_create_release
[   37.382561] device: 'vcsa1': device_unregister
[   37.382562] PM: Removing info for No Bus:vcsa1
[   37.382675] device: 'vcsa1': device_create_release
[   37.409898] device: 'vcs1': device_add
[   37.409931] PM: Adding info for No Bus:vcs1
[   37.410023] device: 'vcsa1': device_add
[   37.410048] PM: Adding info for No Bus:vcsa1
[   37.426250] device: 'vcs1': device_unregister
[   37.426251] PM: Removing info for No Bus:vcs1
[   37.426366] device: 'vcs1': device_create_release
[   37.426371] device: 'vcsa1': device_unregister
[   37.426372] PM: Removing info for No Bus:vcsa1
[   37.426482] device: 'vcsa1': device_create_release
[   37.476855] device: 'vcs1': device_add
[   37.476904] PM: Adding info for No Bus:vcs1
[   37.477047] device: 'vcsa1': device_add
[   37.477072] PM: Adding info for No Bus:vcsa1
[   37.493301] device: 'vcs1': device_unregister
[   37.493302] PM: Removing info for No Bus:vcs1
[   37.493417] device: 'vcs1': device_create_release
[   37.493421] device: 'vcsa1': device_unregister
[   37.493422] PM: Removing info for No Bus:vcsa1
[   37.493533] device: 'vcsa1': device_create_release
[   37.520749] device: 'vcs1': device_add
[   37.520775] PM: Adding info for No Bus:vcs1
[   37.520864] device: 'vcsa1': device_add
[   37.520889] PM: Adding info for No Bus:vcsa1
[   37.537141] device: 'vcs1': device_unregister
[   37.537142] PM: Removing info for No Bus:vcs1
[   37.537255] device: 'vcs1': device_create_release
[   37.537260] device: 'vcsa1': device_unregister
[   37.537261] PM: Removing info for No Bus:vcsa1
[   37.537371] device: 'vcsa1': device_create_release
[   37.564585] device: 'vcs1': device_add
[   37.564611] PM: Adding info for No Bus:vcs1
[   37.564700] device: 'vcsa1': device_add
[   37.564725] PM: Adding info for No Bus:vcsa1
[   37.580979] device: 'vcs1': device_unregister
[   37.580980] PM: Removing info for No Bus:vcs1
[   37.581092] device: 'vcs1': device_create_release
[   37.581096] device: 'vcsa1': device_unregister
[   37.581097] PM: Removing info for No Bus:vcsa1
[   37.581208] device: 'vcsa1': device_create_release
[   37.630420] device: 'vcs1': device_add
[   37.630454] PM: Adding info for No Bus:vcs1
[   37.630548] device: 'vcsa1': device_add
[   37.630574] PM: Adding info for No Bus:vcsa1
[   39.536960] device: 'device:00': dev_uevent: bus uevent() returned -12
[   39.543714] device: 'device:01': dev_uevent: bus uevent() returned -12
[   39.551307] device: 'device:02': dev_uevent: bus uevent() returned -12
[   39.558957] device: 'device:03': dev_uevent: bus uevent() returned -12
[   39.566059] device: 'device:04': dev_uevent: bus uevent() returned -12
[   39.572649] device: 'device:05': dev_uevent: bus uevent() returned -12
[   39.579250] device: 'device:06': dev_uevent: bus uevent() returned -12
[   39.586251] device: 'device:07': dev_uevent: bus uevent() returned -12
[   39.592880] device: 'device:08': dev_uevent: bus uevent() returned -12
[   39.600030] device: 'device:09': dev_uevent: bus uevent() returned -12
[   39.606621] device: 'device:0a': dev_uevent: bus uevent() returned -12
[   39.613214] device: 'device:0b': dev_uevent: bus uevent() returned -12
[   39.620202] device: 'device:0c': dev_uevent: bus uevent() returned -12
[   39.626795] device: 'device:0d': dev_uevent: bus uevent() returned -12
[   39.633910] device: 'device:0e': dev_uevent: bus uevent() returned -12
[   39.640500] device: 'device:0f': dev_uevent: bus uevent() returned -12
[   39.647097] device: 'device:10': dev_uevent: bus uevent() returned -12
[   39.654075] device: 'device:11': dev_uevent: bus uevent() returned -12
[   39.660666] device: 'device:12': dev_uevent: bus uevent() returned -12
[   39.667772] device: 'device:13': dev_uevent: bus uevent() returned -12
[   39.674361] device: 'device:14': dev_uevent: bus uevent() returned -12
[   39.680958] device: 'device:15': dev_uevent: bus uevent() returned -12
[   39.687951] device: 'device:16': dev_uevent: bus uevent() returned -12
[   39.694542] device: 'device:17': dev_uevent: bus uevent() returned -12
[   39.701650] device: 'device:18': dev_uevent: bus uevent() returned -12
[   39.708241] device: 'device:19': dev_uevent: bus uevent() returned -12
[   39.714838] device: 'device:1a': dev_uevent: bus uevent() returned -12
[   39.722708] usb usb1: uevent
[   39.725662] usb 1-0:1.0: uevent
[   39.728949] usb usb2: uevent
[   39.731906] usb 2-0:1.0: uevent
[   39.735134] usb usb3: uevent
[   39.738087] usb 3-0:1.0: uevent
[   39.742168] usb usb4: uevent
[   39.745122] usb 4-0:1.0: uevent
[   39.748352] usb usb5: uevent
[   39.751821] usb 5-0:1.0: uevent
[   44.179107] EXT3 FS on sda1, internal journal
[   44.281452] kjournald starting.  Commit interval 5 seconds
[   44.281685] EXT3 FS on sdb1, internal journal
[   44.281689] EXT3-fs: mounted filesystem with ordered data mode.
[   44.938966] Adding 8193140k swap on /dev/sda2.  Priority:-1 extents:1 across:8193140k
[   45.058680] device: 'vcs1': device_unregister
[   45.058682] PM: Removing info for No Bus:vcs1
[   45.058852] device: 'vcs1': device_create_release
[   45.058860] device: 'vcsa1': device_unregister
[   45.058861] PM: Removing info for No Bus:vcsa1
[   45.058920] device: 'vcsa1': device_create_release
[   45.112959] device: 'vcs1': device_add
[   45.113057] PM: Adding info for No Bus:vcs1
[   45.113086] device: 'vcsa1': device_add
[   45.113111] PM: Adding info for No Bus:vcsa1
[   45.129777] device: 'vcs1': device_unregister
[   45.129779] PM: Removing info for No Bus:vcs1
[   45.129832] device: 'vcs1': device_create_release
[   45.129837] device: 'vcsa1': device_unregister
[   45.129838] PM: Removing info for No Bus:vcsa1
[   45.129885] device: 'vcsa1': device_create_release
[   45.157654] device: 'vcs1': device_add
[   45.157684] PM: Adding info for No Bus:vcs1
[   45.157707] device: 'vcsa1': device_add
[   45.157733] PM: Adding info for No Bus:vcsa1
[   45.174232] device: 'vcs1': device_unregister
[   45.174233] PM: Removing info for No Bus:vcs1
[   45.174288] device: 'vcs1': device_create_release
[   45.174293] device: 'vcsa1': device_unregister
[   45.174294] PM: Removing info for No Bus:vcsa1
[   45.174341] device: 'vcsa1': device_create_release
[   45.201860] device: 'vcs1': device_add
[   45.201896] PM: Adding info for No Bus:vcs1
[   45.201920] device: 'vcsa1': device_add
[   45.201945] PM: Adding info for No Bus:vcsa1
[   45.218444] device: 'vcs1': device_unregister
[   45.218446] PM: Removing info for No Bus:vcs1
[   45.218502] device: 'vcs1': device_create_release
[   45.218506] device: 'vcsa1': device_unregister
[   45.218508] PM: Removing info for No Bus:vcsa1
[   45.218554] device: 'vcsa1': device_create_release
[   45.246967] device: 'vcs1': device_add
[   45.247009] PM: Adding info for No Bus:vcs1
[   45.247031] device: 'vcsa1': device_add
[   45.247057] PM: Adding info for No Bus:vcsa1
[   46.233159] device: 'bpq0': device_add
[   46.237028] PM: Adding info for No Bus:bpq0
[   46.241336] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   49.136944] 0000:04:00.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   49.145241] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
>> So i'd suggest a different, more carful approach: keep the new code 
>> you wrote, but print a WARN()ing if prev_map is not unmapped yet when 
>> the next mapping is acquired. That way the ACPI code can be fixed 
>> gradually and without breaking existing functionality.
>>     
>
> ok, i stuck in your patches into tip/master today and -tip testing 
> quickly found an early-ioremap leak:
>
> [   36.625100] calling  check_early_ioremap_leak+0x0/0x3d
> [   36.630253] ------------[ cut here ]------------
> [   36.634884] WARNING: at arch/x86/mm/ioremap.c:577 check_early_ioremap_leak+0x28/0x3d()
> [   36.642811] Debug warning: early ioremap leak of 1 areas detected.
>
> find the full log below with ioremap-leak-tracing turned on. I've 
> excluded these commits for now from tip/master.
>   

Yes, that leak is expected, unfortunately.  __acpi_map_table() has no
corresponding unmap, and only maintains one mapping.  So it will leak
its last mapping when it switches over from using __acpi_map_table() to
ioremap().

So, yes, its ugly, but its guaranteed to be a single leaked mapping. 
But I'm not sure what the best approach to deal with it is.

(All those other backtraces are just informational, right?)

    J

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

> Ingo Molnar wrote:
> >> So i'd suggest a different, more carful approach: keep the new code 
> >> you wrote, but print a WARN()ing if prev_map is not unmapped yet when 
> >> the next mapping is acquired. That way the ACPI code can be fixed 
> >> gradually and without breaking existing functionality.
> >>     
> >
> > ok, i stuck in your patches into tip/master today and -tip testing 
> > quickly found an early-ioremap leak:
> >
> > [   36.625100] calling  check_early_ioremap_leak+0x0/0x3d
> > [   36.630253] ------------[ cut here ]------------
> > [   36.634884] WARNING: at arch/x86/mm/ioremap.c:577 check_early_ioremap_leak+0x28/0x3d()
> > [   36.642811] Debug warning: early ioremap leak of 1 areas detected.
> >
> > find the full log below with ioremap-leak-tracing turned on. I've 
> > excluded these commits for now from tip/master.
> >   
> 
> Yes, that leak is expected, unfortunately.  __acpi_map_table() has no 
> corresponding unmap, and only maintains one mapping.  So it will leak 
> its last mapping when it switches over from using __acpi_map_table() 
> to ioremap().
> 
> So, yes, its ugly, but its guaranteed to be a single leaked mapping. 
> But I'm not sure what the best approach to deal with it is.

the false positive should be avoided, for example by unmapping the 
'prev' mapping shortly before the leak check.

> (All those other backtraces are just informational, right?)

no, they cause hard failures in my test setup. Nor do we want to litter 
the bootup log with messages that are not correct.

	Ingo

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Jeremy Fitzhardinge]

Ingo Molnar wrote:
> the false positive should be avoided, for example by unmapping the 
> 'prev' mapping shortly before the leak check.
>   

Yep.  I'll make it unmap just before setting acpi_gbl_permanent_mmap,
which is when it switches to using plain old ioremap.

>> (All those other backtraces are just informational, right?)
>>     
>
> no, they cause hard failures in my test setup. Nor do we want to litter 
> the bootup log with messages that are not correct.
>   

No, I mean that early_ioremap_debug causes all early_ioremap()s to dump
a stack trace, so most of the stack dumps in the boot log are
diagnostic/informational rather than indications of lots of problems.

    J

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

> Ingo Molnar wrote:
> > the false positive should be avoided, for example by unmapping the 
> > 'prev' mapping shortly before the leak check.
> >   
> 
> Yep.  I'll make it unmap just before setting acpi_gbl_permanent_mmap,
> which is when it switches to using plain old ioremap.
> 
> >> (All those other backtraces are just informational, right?)
> >>     
> >
> > no, they cause hard failures in my test setup. Nor do we want to litter 
> > the bootup log with messages that are not correct.
> >   
> 
> No, I mean that early_ioremap_debug causes all early_ioremap()s to 
> dump a stack trace, so most of the stack dumps in the boot log are 
> diagnostic/informational rather than indications of lots of problems.

ah - now i understand what you mean, sure. The only non-diagnostic 
message that the test barfed on was the leak warning itself. The others 
were there because i did a second boot with the diagnostic messages 
enabled as well. (so that there's a full track of what is mapped where)

	Ingo

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Yinghai Lu]

On Wed, Sep 10, 2008 at 9:49 AM, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
> Ingo Molnar wrote:
>>> So i'd suggest a different, more carful approach: keep the new code
>>> you wrote, but print a WARN()ing if prev_map is not unmapped yet when
>>> the next mapping is acquired. That way the ACPI code can be fixed
>>> gradually and without breaking existing functionality.
>>>
>>
>> ok, i stuck in your patches into tip/master today and -tip testing
>> quickly found an early-ioremap leak:
>>
>> [   36.625100] calling  check_early_ioremap_leak+0x0/0x3d
>> [   36.630253] ------------[ cut here ]------------
>> [   36.634884] WARNING: at arch/x86/mm/ioremap.c:577 check_early_ioremap_leak+0x28/0x3d()
>> [   36.642811] Debug warning: early ioremap leak of 1 areas detected.
>>
>> find the full log below with ioremap-leak-tracing turned on. I've
>> excluded these commits for now from tip/master.
>>
>
> Yes, that leak is expected, unfortunately.  __acpi_map_table() has no
> corresponding unmap, and only maintains one mapping.  So it will leak
> its last mapping when it switches over from using __acpi_map_table() to
> ioremap().
>
> So, yes, its ugly, but its guaranteed to be a single leaked mapping.
> But I'm not sure what the best approach to deal with it is.
>
> (All those other backtraces are just informational, right?)
>

acpi_os_map_memory is the only user for __acpi_map_table (except es7000_32.c)

void __iomem *__init_refok
acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
{
        if (phys > ULONG_MAX) {
                printk(KERN_ERR PREFIX "Cannot map memory that high\n");
                return NULL;
        }
        if (acpi_gbl_permanent_mmap)
                /*
                * ioremap checks to ensure this is in reserved space
                */
                return ioremap((unsigned long)phys, size);
        else
                return __acpi_map_table((unsigned long)phys, size);
}
EXPORT_SYMBOL_GPL(acpi_os_map_memory);

void acpi_os_unmap_memory(void __iomem * virt, acpi_size size)
{
        if (acpi_gbl_permanent_mmap) {
                iounmap(virt);
        }
}
EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);

just let acpi_os_unmap_memory to call __acpi_unmap_table...

YH

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Jeremy Fitzhardinge]

Yinghai Lu wrote:
> void __iomem *__init_refok
> acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
> {
>         if (phys > ULONG_MAX) {
>                 printk(KERN_ERR PREFIX "Cannot map memory that high\n");
>                 return NULL;
>         }
>         if (acpi_gbl_permanent_mmap)
>                 /*
>                 * ioremap checks to ensure this is in reserved space
>                 */
>                 return ioremap((unsigned long)phys, size);
>         else
>                 return __acpi_map_table((unsigned long)phys, size);
> }
> EXPORT_SYMBOL_GPL(acpi_os_map_memory);
>
> void acpi_os_unmap_memory(void __iomem * virt, acpi_size size)
> {
>         if (acpi_gbl_permanent_mmap) {
>                 iounmap(virt);
>         }
> }
> EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
>
> just let acpi_os_unmap_memory to call __acpi_unmap_table...
>   

That was my first attempt.  Unfortunately a lot of the acpi code seems
pretty sloppy about unmapping its tables, and basically relies on
__acpi_map_table's current behaviour of removing the previous mapping
when creating the new mapping.

    J

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Ingo Molnar]

* Jeremy Fitzhardinge <jeremy@goop.org> wrote:

> Yinghai Lu wrote:
> > void __iomem *__init_refok
> > acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
> > {
> >         if (phys > ULONG_MAX) {
> >                 printk(KERN_ERR PREFIX "Cannot map memory that high\n");
> >                 return NULL;
> >         }
> >         if (acpi_gbl_permanent_mmap)
> >                 /*
> >                 * ioremap checks to ensure this is in reserved space
> >                 */
> >                 return ioremap((unsigned long)phys, size);
> >         else
> >                 return __acpi_map_table((unsigned long)phys, size);
> > }
> > EXPORT_SYMBOL_GPL(acpi_os_map_memory);
> >
> > void acpi_os_unmap_memory(void __iomem * virt, acpi_size size)
> > {
> >         if (acpi_gbl_permanent_mmap) {
> >                 iounmap(virt);
> >         }
> > }
> > EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
> >
> > just let acpi_os_unmap_memory to call __acpi_unmap_table...
> >   
> 
> That was my first attempt.  Unfortunately a lot of the acpi code seems 
> pretty sloppy about unmapping its tables, and basically relies on 
> __acpi_map_table's current behaviour of removing the previous mapping 
> when creating the new mapping.

could we just emit a WARN_ON_ONCE() warning when we have to remove a 
previous mapping, so that the ACPI code can be fixed eventually?

	Ingo

Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table

[Yinghai Lu]

On Fri, Sep 12, 2008 at 2:49 AM, Ingo Molnar <mingo@elte.hu> wrote:
>
> * Jeremy Fitzhardinge <jeremy@goop.org> wrote:
>
>> Yinghai Lu wrote:
>> > void __iomem *__init_refok
>> > acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
>> > {
>> >         if (phys > ULONG_MAX) {
>> >                 printk(KERN_ERR PREFIX "Cannot map memory that high\n");
>> >                 return NULL;
>> >         }
>> >         if (acpi_gbl_permanent_mmap)
>> >                 /*
>> >                 * ioremap checks to ensure this is in reserved space
>> >                 */
>> >                 return ioremap((unsigned long)phys, size);
>> >         else
>> >                 return __acpi_map_table((unsigned long)phys, size);
>> > }
>> > EXPORT_SYMBOL_GPL(acpi_os_map_memory);
>> >
>> > void acpi_os_unmap_memory(void __iomem * virt, acpi_size size)
>> > {
>> >         if (acpi_gbl_permanent_mmap) {
>> >                 iounmap(virt);
>> >         }
>> > }
>> > EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
>> >
>> > just let acpi_os_unmap_memory to call __acpi_unmap_table...
>> >
>>
>> That was my first attempt.  Unfortunately a lot of the acpi code seems
>> pretty sloppy about unmapping its tables, and basically relies on
>> __acpi_map_table's current behaviour of removing the previous mapping
>> when creating the new mapping.
>
> could we just emit a WARN_ON_ONCE() warning when we have to remove a
> previous mapping, so that the ACPI code can be fixed eventually?

could be some code is shared between early and permanent, and later
may not need unmap.

anyway those code need to be cleanup, to double check if some fix-map
is overwrited unexpected..

YH

[PATCH] acpi: remove final __acpi_map_table mapping before setting acpi_gbl_permanent_mmap

[Jeremy Fitzhardinge]

On x86, __acpi_map_table uses early_ioremap() to create the mapping,
replacing the previous mapping with a new one.  Once enough of the
kernel is up an running it switches to using normal ioremap().  At
that point, we need to clean up the final mapping to avoid a warning
from the early_ioremap subsystem.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/acpi/boot.c |    8 +++++---
 drivers/acpi/bus.c          |    6 ++++++
 2 files changed, 11 insertions(+), 3 deletions(-)

===================================================================
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -124,11 +124,13 @@
 	static char *prev_map;
 	static unsigned long prev_size;
 
+	if (prev_map) {
+		early_iounmap(prev_map, prev_size);
+		prev_map = NULL;
+	}
+
 	if (!phys || !size)
 		return NULL;
-
-	if (prev_map)
-		early_iounmap(prev_map, prev_size);
 
 	prev_size = size;
 	prev_map = early_ioremap(phys, size);
===================================================================
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -650,6 +650,12 @@
 	if (!acpi_strict)
 		acpi_gbl_enable_interpreter_slack = TRUE;
 
+	/*
+	 * Doing a zero-sized mapping will clear out the previous
+	 * __acpi_map_table() mapping, if any.
+	 */
+	__acpi_map_table(0, 0);
+
 	acpi_gbl_permanent_mmap = 1;
 
 	status = acpi_reallocate_root_table();

[PATCH 7 of 7] x86: always explicitly map acpi memory

[Jeremy Fitzhardinge]

Always map acpi tables, rather than assuming we can use the normal
linear mapping to access the acpi tables.  This is necessary in a
virtual environment where the linear mappings are to pseudo-physical
memory, but the acpi tables exist at a real physical address.  It
doesn't hurt to map in the normal non-virtual case, so just do it
unconditionally.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/acpi/boot.c |    3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -126,9 +126,6 @@
 
 	if (!phys || !size)
 		return NULL;
-
-	if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT))
-		return __va(phys);
 
 	if (prev_map)
 		early_iounmap(prev_map, prev_size);

Re: [Xen-devel] [PATCH 7 of 7] x86: always explicitly map acpi memory

[Yinghai Lu]

On Sun, Sep 7, 2008 at 3:21 PM, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
> Always map acpi tables, rather than assuming we can use the normal
> linear mapping to access the acpi tables.  This is necessary in a
> virtual environment where the linear mappings are to pseudo-physical
> memory, but the acpi tables exist at a real physical address.  It
> doesn't hurt to map in the normal non-virtual case, so just do it
> unconditionally.
>
> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> ---
>  arch/x86/kernel/acpi/boot.c |    3 ---
>  1 file changed, 3 deletions(-)
>
> diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
> --- a/arch/x86/kernel/acpi/boot.c
> +++ b/arch/x86/kernel/acpi/boot.c
> @@ -126,9 +126,6 @@
>
>        if (!phys || !size)
>                return NULL;
> -
> -       if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT))
> -               return __va(phys);
>
>        if (prev_map)
>                early_iounmap(prev_map, prev_size);
>

actually,
case 1: acpi tables near mmio, range, we don't map them from
2.6.27-rc1, and it is bigger than max_low_mapped...
case 2: some strange system put acpi in the middle of RAM... like when
8G ram installed, but MMIO is 3.5G, BIOS put acpi tables around 2G..

YH

Re: [Xen-devel] [PATCH 7 of 7] x86: always explicitly map acpi memory

[Jeremy Fitzhardinge]

Yinghai Lu wrote:
> actually,
> case 1: acpi tables near mmio, range, we don't map them from
> 2.6.27-rc1, and it is bigger than max_low_mapped...
> case 2: some strange system put acpi in the middle of RAM... like when
> 8G ram installed, but MMIO is 3.5G, BIOS put acpi tables around 2G..
>   

OK, so what's your conclusion?  Is this change OK or not?

    J

Re: [Xen-devel] [PATCH 7 of 7] x86: always explicitly map acpi memory

[Yinghai Lu]

On Sun, Sep 7, 2008 at 5:02 PM, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
> Yinghai Lu wrote:
>> actually,
>> case 1: acpi tables near mmio, range, we don't map them from
>> 2.6.27-rc1, and it is bigger than max_low_mapped...
>> case 2: some strange system put acpi in the middle of RAM... like when
>> 8G ram installed, but MMIO is 3.5G, BIOS put acpi tables around 2G..
>>
>
> OK, so what's your conclusion?  Is this change OK or not?
>

Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>