* PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
@ 2009-01-18 12:38 Mark Hounschell
2009-01-19 8:48 ` Mark Hounschell
` (2 more replies)
0 siblings, 3 replies; 59+ messages in thread
From: Mark Hounschell @ 2009-01-18 12:38 UTC (permalink / raw)
To: linux-kernel; +Cc: Mark Hounschell
I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
I have tried kernels from 2.6.26 through 2.6.28.
I _can_ however boot these kernels when they are configured for HZ = 250. I
haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
indicated below in the dmesg output.
The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
While running a 2.6.26.8 kernel configured for HZ = 250:
/proc/version:
Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
[gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
16:37:58 EST 2009
scripts/ver_linux:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
i386 GNU/Linux
Gnu C 4.3
Gnu make 3.81
binutils 11.0
2.18.50.20080409
11.1
util-linux 2.13.1
mount 2.13.1
module-init-tools 3.4
e2fsprogs 1.40.8
reiserfsprogs 3.6.19
PPP 2.4.4
Linux C Library 2.8
Dynamic linker (ldd) 2.8
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
Sh-utils 6.11
udev 120
wireless-tools 29
Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
atiixp ide_core ahci pata_jmicron libata scsi_mod dock
/proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Processor model unknown
stepping : 2
cpu MHz : 3000.306
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 3956.73
clflush size : 64
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Processor model unknown
stepping : 2
cpu MHz : 3000.306
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6000.60
clflush size : 64
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Processor model unknown
stepping : 2
cpu MHz : 3000.306
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6000.47
clflush size : 64
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Processor model unknown
stepping : 2
cpu MHz : 3000.306
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6000.47
clflush size : 64
power management: ts ttp tm stc 100mhzsteps hwpstate
dmesg:
Initializing cgroup subsys cpuset
Linux version 2.6.26.8-lcrs (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat
Jan 17 16:37:58 EST 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3264MB HIGHMEM available.
832MB LOWMEM available.
found SMP MP-table at [c00f3f00] 000f3f00
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 212992
HighMem 212992 -> 1048576
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1632 pages used for memmap
Normal zone: 207264 pages, LIFO batch:31
HighMem zone: 6528 pages used for memmap
HighMem zone: 829056 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.5 present.
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 38788 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
noresume splash=silent bigphysarea=0x4000 vmalloc=192M vga=0x317
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3000.306 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3031940k/4194304k available (1748k kernel code, 112564k reserved, 732k
data, 216k init, 2293632k highmem)
virtual kernel memory layout:
fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
.init : 0xc0373000 - 0xc03a9000 ( 216 kB)
.data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
.text : 0xc0100000 - 0xc02b5336 (1748 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
The 2.6.26.8 kernel hangs up right here.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
Probably due to long platform interrupts. Consider using "lpj=" boot option.
Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(4) -> Core 0
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080321
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Processor model unknown stepping 02
Booting processor 1/1 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(4) -> Core 2
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Processor model unknown stepping 02
Booting processor 2/2 ip 2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2(4) -> Core 1
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Processor model unknown stepping 02
Booting processor 3/3 ip 2000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3(4) -> Core 3
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Processor model unknown stepping 02
Brought up 4 CPUs
Total of 4 processors activated (21958.28 BogoMIPS).
net_namespace: 660 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:12.0: set SATA to AHCI mode
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0d: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 3
system 00:01: ioport range 0x4100-0x411f has been reserved
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd0-0xcd1 has been reserved
system 00:01: ioport range 0xcd2-0xcd3 has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:01: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x220-0x225 has been reserved
system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
system 00:0d: iomem range 0x0-0x1fffff could not be reserved
system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0xbffdffff could not be reserved
PCI: Bridge: 0000:00:02.0
IO window: d000-dfff
MEM window: 0xf8000000-0xfbffffff
PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:04.0
IO window: c000-cfff
MEM window: 0xfdc00000-0xfdcfffff
PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
PCI: Bridge: 0000:00:06.0
IO window: b000-bfff
MEM window: 0xfda00000-0xfdafffff
PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
PCI: Bridge: 0000:00:07.0
IO window: e000-efff
MEM window: 0xfde00000-0xfdefffff
PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: 0xfd900000-0xfd9fffff
PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 10039k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1232260163.932:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
bigphysarea: Allocated 16384 pages at 0xc3038000.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1462
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
vesafb: framebuffer at 0xf9000000, mapped to 0xf4880000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:b0a0
vesafb: pmi: set display start = c00cb103, set palette = c00cb15e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0
3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
logips2pp: Detected unknown logitech mouse model 11
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
Using IPI No-Shortcut mode
Freeing unused kernel memory: 216k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
ahci 0000:00:12.0: version 3.0
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata5: failed due to HW bug, retry pmp=0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
SB600_PATA: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907
Probing IDE interface ide0...
hda: ST3120023A, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 21 (level, low) -> IRQ 21
scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 0000:04:00.0: v1.21 addr 0xfdefc000 irq 19 Yukon-EC Ultra (0xb4) rev 5
sky2 eth0: addr 00:e0:4d:7a:8c:ee
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
Driver 'sd' needs updating - please use bus_type methods
usbcore: registered new device driver usb
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1 sda2 sda3 < sda5<6>usb usb1: configuration #1 chosen from 1 choice
sda6<6>hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sda7 sda8 sda9 sda10 >
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb: sdb1 sdb2 sdb3 <<6>usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
sdb5<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
sdb6<6>usb usb1: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
sdb7<6>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
sdb8<6>ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
sdb9<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
sdb10 >
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26.8-lcrs ehci_hcd
usb usb2: SerialNumber: 0000:00:13.5
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=03f0, idProduct=5111
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Photosmart 3200 series
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: Manufacturer: HP
usb 2-1: SerialNumber: MY5B98310Z045K
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-2: New USB device found, idVendor=0424, idProduct=2504
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
Linux agpgart interface v0.103
eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
eth1: Intel(R) PRO/1000 Network Connection
eth1: MAC: 1, PHY: 4, PBA No: d50854-003
usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
ppdev: user-space parallel port driver
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a,
fline=0x0, cd=0x0, aux=0x0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: [sdd] Attached SCSI removable disk
sd 9:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
hda-intel: Invalid position buffer, using LPIB read method instead.
Using a 2.6.28 kernel the dmesg is slightly different and it seems to get a
little further. The last line on the screen is
Using C1E aware idle routine.
The BIOS on my MB doesn't recognize the processor type either BTW. At post it
says it an AMD processor type undefined.
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-18 12:38 PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor Mark Hounschell
@ 2009-01-19 8:48 ` Mark Hounschell
2009-01-19 12:41 ` Bartlomiej Zolnierkiewicz
2009-01-19 14:22 ` Borislav Petkov
2009-01-20 0:25 ` john stultz
2 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-19 8:48 UTC (permalink / raw)
To: linux-kernel; +Cc: Mark Hounschell
Mark Hounschell wrote:
> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>
> I have tried kernels from 2.6.26 through 2.6.28.
>
> I _can_ however boot these kernels when they are configured for HZ = 250. I
> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> indicated below in the dmesg output.
>
> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>
The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured
kernel. Sorry.
> While running a 2.6.26.8 kernel configured for HZ = 250:
>
> /proc/version:
>
> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
> [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
> 16:37:58 EST 2009
>
>
> scripts/ver_linux:
>
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
> i386 GNU/Linux
>
> Gnu C 4.3
> Gnu make 3.81
> binutils 11.0
> 2.18.50.20080409
> 11.1
> util-linux 2.13.1
> mount 2.13.1
> module-init-tools 3.4
> e2fsprogs 1.40.8
> reiserfsprogs 3.6.19
> PPP 2.4.4
> Linux C Library 2.8
> Dynamic linker (ldd) 2.8
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 6.11
> udev 120
> wireless-tools 29
> Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
> snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
> ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
> nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
> nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
> snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
> i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
> snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
> sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
> atiixp ide_core ahci pata_jmicron libata scsi_mod dock
>
>
> /proc/cpuinfo:
>
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 0
> cpu cores : 4
> apicid : 0
> initial apicid : 0
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 3956.73
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 2
> cpu cores : 4
> apicid : 2
> initial apicid : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 6000.60
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> processor : 2
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 1
> cpu cores : 4
> apicid : 1
> initial apicid : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 6000.47
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> processor : 3
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 3
> cpu cores : 4
> apicid : 3
> initial apicid : 3
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 6000.47
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
>
> dmesg:
>
> Initializing cgroup subsys cpuset
> Linux version 2.6.26.8-lcrs (root@harley) (gcc version 4.3.1 20080507
> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat
> Jan 17 16:37:58 EST 2009
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Warning only 4GB will be used.
> Use a HIGHMEM64G enabled kernel.
> 3264MB HIGHMEM available.
> 832MB LOWMEM available.
> found SMP MP-table at [c00f3f00] 000f3f00
> Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 212992
> HighMem 212992 -> 1048576
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 1048576
> On node 0 totalpages: 1048576
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 1632 pages used for memmap
> Normal zone: 207264 pages, LIFO batch:31
> HighMem zone: 6528 pages used for memmap
> HighMem zone: 829056 pages, LIFO batch:31
> Movable zone: 0 pages used for memmap
> DMI 2.5 present.
> ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
> ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
> ACPI: FACS BFFE0000, 0040
> ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
> ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
> ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ATI board detected. Disabling timer routing over 8254.
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 38788 bytes of per cpu data
> NR_CPUS: 32, nr_cpu_ids: 4
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
> Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
> noresume splash=silent bigphysarea=0x4000 vmalloc=192M vga=0x317
> mapped APIC to ffffb000 (fee00000)
> mapped IOAPIC to ffffa000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> Preemptible RCU implementation.
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Detected 3000.306 MHz processor.
> Console: colour dummy device 80x25
> console [tty0] enabled
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 3031940k/4194304k available (1748k kernel code, 112564k reserved, 732k
> data, 216k init, 2293632k highmem)
> virtual kernel memory layout:
> fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>
>
> The 2.6.26.8 kernel hangs up right here.
>
>
> CPA: page pool initialized 1 of 1 pages preallocated
> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> hpet clockevent registered
> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
> Probably due to long platform interrupts. Consider using "lpj=" boot option.
> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
> Security Framework initialized
> Capability LSM initialized
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 0(4) -> Core 0
> Checking 'hlt' instruction... OK.
> ACPI: Core revision 20080321
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: AMD Processor model unknown stepping 02
> Booting processor 1/1 ip 2000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 1(4) -> Core 2
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: AMD Processor model unknown stepping 02
> Booting processor 2/2 ip 2000
> Initializing CPU#2
> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 2(4) -> Core 1
> x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
> CPU2: AMD Processor model unknown stepping 02
> Booting processor 3/3 ip 2000
> Initializing CPU#3
> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 3(4) -> Core 3
> x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
> CPU3: AMD Processor model unknown stepping 02
> Brought up 4 CPUs
> Total of 4 processors activated (21958.28 BogoMIPS).
> net_namespace: 660 bytes
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: MCFG area at e0000000 reserved in E820
> PCI: Using MMCONFIG for extended config space
> PCI: Using configuration type 1 for base access
> Setting up standard PCI resources
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:12.0: set SATA to AHCI mode
> PCI: Transparent bridge - 0000:00:14.4
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp 00:0d: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp: PnP ACPI: found 14 devices
> ACPI: ACPI bus type pnp unregistered
> PnPBIOS: Disabled by ACPI PNP
> PCI: Using ACPI for IRQ routing
> PCI: Cannot allocate resource region 3 of device 0000:00:00.0
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> hpet0: 4 32-bit timers, 14318180 Hz
> ACPI: RTC can wake from S4
> Switched to high resolution mode on CPU 0
> Switched to high resolution mode on CPU 2
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 3
> system 00:01: ioport range 0x4100-0x411f has been reserved
> system 00:01: ioport range 0x228-0x22f has been reserved
> system 00:01: ioport range 0x40b-0x40b has been reserved
> system 00:01: ioport range 0x4d6-0x4d6 has been reserved
> system 00:01: ioport range 0xc00-0xc01 has been reserved
> system 00:01: ioport range 0xc14-0xc14 has been reserved
> system 00:01: ioport range 0xc50-0xc52 has been reserved
> system 00:01: ioport range 0xc6c-0xc6d has been reserved
> system 00:01: ioport range 0xc6f-0xc6f has been reserved
> system 00:01: ioport range 0xcd0-0xcd1 has been reserved
> system 00:01: ioport range 0xcd2-0xcd3 has been reserved
> system 00:01: ioport range 0xcd4-0xcdf has been reserved
> system 00:01: ioport range 0x4000-0x40fe has been reserved
> system 00:01: ioport range 0x4210-0x4217 has been reserved
> system 00:01: ioport range 0xb10-0xb1f has been reserved
> system 00:07: ioport range 0x4d0-0x4d1 has been reserved
> system 00:07: ioport range 0x220-0x225 has been reserved
> system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
> system 00:0d: iomem range 0x0-0x1fffff could not be reserved
> system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
> system 00:0d: iomem range 0x0-0x9ffff could not be reserved
> system 00:0d: iomem range 0x100000-0xbffdffff could not be reserved
> PCI: Bridge: 0000:00:02.0
> IO window: d000-dfff
> MEM window: 0xf8000000-0xfbffffff
> PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
> PCI: Bridge: 0000:00:04.0
> IO window: c000-cfff
> MEM window: 0xfdc00000-0xfdcfffff
> PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
> PCI: Bridge: 0000:00:06.0
> IO window: b000-bfff
> MEM window: 0xfda00000-0xfdafffff
> PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
> PCI: Bridge: 0000:00:07.0
> IO window: e000-efff
> MEM window: 0xfde00000-0xfdefffff
> PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
> PCI: Bridge: 0000:00:14.4
> IO window: a000-afff
> MEM window: 0xfd900000-0xfd9fffff
> PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> Unpacking initramfs... done
> Freeing initrd memory: 10039k freed
> audit: initializing netlink socket (disabled)
> type=2000 audit(1232260163.932:1): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> bigphysarea: Allocated 16384 pages at 0xc3038000.
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> msgmni has been set to 1462
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci 0000:01:00.0: Boot video device
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:02.0:pcie00]
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:04.0:pcie00]
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:06.0:pcie00]
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:07.0:pcie00]
> vesafb: framebuffer at 0xf9000000, mapped to 0xf4880000, using 3072k, total 14336k
> vesafb: mode is 1024x768x16, linelength=2048, pages=1
> vesafb: protected mode interface info at c000:b0a0
> vesafb: pmi: set display start = c00cb103, set palette = c00cb15e
> vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0
> 3d1 3d2 3d3 3d4 3d5 3da
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> hpet_resources: 0xfed00000 is busy
> Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard as /class/input/input0
> input: PC Speaker as /class/input/input1
> logips2pp: Detected unknown logitech mouse model 11
> input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
> Using IPI No-Shortcut mode
> Freeing unused kernel memory: 216k freed
> No dock devices found.
> SCSI subsystem initialized
> libata version 3.00 loaded.
> pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
> ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:03:00.1 to 64
> scsi0 : pata_jmicron
> scsi1 : pata_jmicron
> ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
> ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
> ahci 0000:00:12.0: version 3.0
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
> ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
> ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
> ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
> ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
> ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
> ata3: softreset failed (device not ready)
> ata3: failed due to HW bug, retry pmp=0
> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
> ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata3.00: configured for UDMA/133
> ata4: softreset failed (device not ready)
> ata4: failed due to HW bug, retry pmp=0
> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
> ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata4.00: configured for UDMA/133
> ata5: softreset failed (device not ready)
> ata5: failed due to HW bug, retry pmp=0
> ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
> ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata5.00: configured for UDMA/133
> ata6: SATA link down (SStatus 0 SControl 300)
> scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
> ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
> PCI: Setting latency timer of device 0000:03:00.0 to 64
> scsi6 : ahci
> scsi7 : ahci
> ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18
> ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18
> ata7: SATA link down (SStatus 0 SControl 300)
> ata8: SATA link down (SStatus 0 SControl 300)
> Uniform Multi-Platform E-IDE driver
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> SB600_PATA: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf900-0xf907
> Probing IDE interface ide0...
> hda: ST3120023A, ATA DISK drive
> hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/100 mode selected
> hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hdb: UDMA/33 mode selected
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 21 (level, low) -> IRQ 21
> scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
> <Adaptec 2930CU SCSI adapter>
> aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
>
> BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:04:00.0 to 64
> sky2 0000:04:00.0: v1.21 addr 0xfdefc000 irq 19 Yukon-EC Ultra (0xb4) rev 5
> sky2 eth0: addr 00:e0:4d:7a:8c:ee
> Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
> Copyright (c) 1999-2006 Intel Corporation.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> Driver 'sd' needs updating - please use bus_type methods
> usbcore: registered new device driver usb
> sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
> sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sda: sda1 sda2 sda3 < sda5<6>usb usb1: configuration #1 chosen from 1 choice
> sda6<6>hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> sda7 sda8 sda9 sda10 >
> sd 2:0:0:0: [sda] Attached SCSI disk
> sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
> sd 3:0:0:0: [sdb] Write Protect is off
> sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
> sd 3:0:0:0: [sdb] Write Protect is off
> sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sdb: sdb1 sdb2 sdb3 <<6>usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0001
> sdb5<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: OHCI Host Controller
> sdb6<6>usb usb1: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb1: SerialNumber: 0000:00:13.0
> sdb7<6>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
> ehci_hcd 0000:00:13.5: EHCI Host Controller
> ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
> sdb8<6>ehci_hcd 0000:00:13.5: debug port 1
> ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
> sdb9<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb2: configuration #1 chosen from 1 choice
> sdb10 >
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 10 ports detected
> sd 3:0:0:0: [sdb] Attached SCSI disk
> sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
> sd 4:0:0:0: [sdc] Write Protect is off
> sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
> sd 4:0:0:0: [sdc] Write Protect is off
> sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sdc: sdc1
> sd 4:0:0:0: [sdc] Attached SCSI disk
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.26.8-lcrs ehci_hcd
> usb usb2: SerialNumber: 0000:00:13.5
> ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.1: OHCI Host Controller
> ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: OHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb3: SerialNumber: 0000:00:13.1
> ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
> ohci_hcd 0000:00:13.2: OHCI Host Controller
> ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
> ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb 2-1: new high speed USB device using ehci_hcd and address 2
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: OHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb4: SerialNumber: 0000:00:13.2
> ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.3: OHCI Host Controller
> ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
> ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
> usb 2-1: configuration #1 chosen from 1 choice
> usb 2-1: New USB device found, idVendor=03f0, idProduct=5111
> usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 2-1: Product: Photosmart 3200 series
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> usb 2-1: Manufacturer: HP
> usb 2-1: SerialNumber: MY5B98310Z045K
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: OHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb5: SerialNumber: 0000:00:13.3
> ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
> ohci_hcd 0000:00:13.4: OHCI Host Controller
> ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
> ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> usb 2-2: new high speed USB device using ehci_hcd and address 3
> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb6: Product: OHCI Host Controller
> usb usb6: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb6: SerialNumber: 0000:00:13.4
> usb 2-2: configuration #1 chosen from 1 choice
> hub 2-2:1.0: USB hub found
> hub 2-2:1.0: 4 ports detected
> usb 2-2: New USB device found, idVendor=0424, idProduct=2504
> usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> sd 2:0:0:0: Attached scsi generic sg0 type 0
> sd 3:0:0:0: Attached scsi generic sg1 type 0
> sd 4:0:0:0: Attached scsi generic sg2 type 0
> hda: max request size: 128KiB
> hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
> hda: cache flushes supported
> hda: hda1
> e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> Linux agpgart interface v0.103
> eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
> eth1: Intel(R) PRO/1000 Network Connection
> eth1: MAC: 1, PHY: 4, PBA No: d50854-003
> usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
> usbcore: registered new interface driver usblp
> Initializing USB Mass Storage driver...
> scsi9 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> IT8718 SuperIO detected.
> parport_pc 00:0a: reported by Plug and Play ACPI
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
> hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20
> rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month
> ppdev: user-space parallel port driver
> nvidia: module license 'NVIDIA' taints kernel.
> ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
> hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
> ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4
> (0x14/0x15/0x16/0x17/0x0)
> ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
> ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a,
> fline=0x0, cd=0x0, aux=0x0
> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:01:00.0 to 64
> NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
> Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
> device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
> scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
> sd 9:0:0:0: [sdd] Attached SCSI removable disk
> sd 9:0:0:0: Attached scsi generic sg3 type 0
> usb-storage: device scan complete
> loop: module loaded
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda6, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda7, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda8, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda9, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda10, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sdc1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> fuse init (API version 7.9)
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> ip_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> sky2 eth0: enabling interface
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> eth0: no IPv6 routers present
> NET: Registered protocol family 4
> NET: Registered protocol family 3
> NET: Registered protocol family 5
> hda-intel: Invalid position buffer, using LPIB read method instead.
>
>
>
>
> Using a 2.6.28 kernel the dmesg is slightly different and it seems to get a
> little further. The last line on the screen is
>
> Using C1E aware idle routine.
>
> The BIOS on my MB doesn't recognize the processor type either BTW. At post it
> says it an AMD processor type undefined.
>
> Regards
> Mark
>
>
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-19 8:48 ` Mark Hounschell
@ 2009-01-19 12:41 ` Bartlomiej Zolnierkiewicz
2009-01-19 14:45 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-01-19 12:41 UTC (permalink / raw)
To: Mark Hounschell; +Cc: linux-kernel, Mark Hounschell
On Monday 19 January 2009, Mark Hounschell wrote:
> Mark Hounschell wrote:
> > I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
> >
> > I have tried kernels from 2.6.26 through 2.6.28.
> >
> > I _can_ however boot these kernels when they are configured for HZ = 250. I
> > haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> > indicated below in the dmesg output.
> >
> > The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
> >
>
> The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured
> kernel. Sorry.
>
> > While running a 2.6.26.8 kernel configured for HZ = 250:
[...]
> > Checking if this processor honours the WP bit even in supervisor mode...Ok.
> >
> >
> > The 2.6.26.8 kernel hangs up right here.
> >
> >
> > CPA: page pool initialized 1 of 1 pages preallocated
> > SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > hpet clockevent registered
> > calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
> > Probably due to long platform interrupts. Consider using "lpj=" boot option.
> > Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
Even if it boots it may not work reliably since lpj/BogoMIPS are too small
(they should be the same as for other CPUs) which in turn could result in too
short delay loops.
> > Security Framework initialized
> > Capability LSM initialized
> > Mount-cache hash table entries: 512
> > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> > CPU: L2 Cache: 512K (64 bytes/line)
> > CPU 0(4) -> Core 0
> > Checking 'hlt' instruction... OK.
> > ACPI: Core revision 20080321
> > ENABLING IO-APIC IRQs
> > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> > CPU0: AMD Processor model unknown stepping 02
> > Booting processor 1/1 ip 2000
> > Initializing CPU#1
> > Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
Here are the proper values.
> > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> > CPU: L2 Cache: 512K (64 bytes/line)
> > CPU 1(4) -> Core 2
> > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> > CPU1: AMD Processor model unknown stepping 02
> > Booting processor 2/2 ip 2000
> > Initializing CPU#2
> > Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
also OK
> > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> > CPU: L2 Cache: 512K (64 bytes/line)
> > CPU 2(4) -> Core 1
> > x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
> > CPU2: AMD Processor model unknown stepping 02
> > Booting processor 3/3 ip 2000
> > Initializing CPU#3
> > Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
ditto
That being said I don't know why delay calibration loop fails on CPU0.
You may try booting with "lpj=12001200" kernel parameter to workaround
the issue (it should fix booting with HZ == 1000) and/or try 2.6.29-rc2
(the problem may have been already fixed).
Thanks,
Bart
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-18 12:38 PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor Mark Hounschell
2009-01-19 8:48 ` Mark Hounschell
@ 2009-01-19 14:22 ` Borislav Petkov
2009-01-19 14:54 ` Mark Hounschell
2009-01-20 0:25 ` john stultz
2 siblings, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-01-19 14:22 UTC (permalink / raw)
To: Mark Hounschell; +Cc: linux-kernel, Mark Hounschell
Hi,
On Sun, Jan 18, 2009 at 07:38:36AM -0500, Mark Hounschell wrote:
> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>
> I have tried kernels from 2.6.26 through 2.6.28.
>
> I _can_ however boot these kernels when they are configured for HZ = 250. I
> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> indicated below in the dmesg output.
>
> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>
> While running a 2.6.26.8 kernel configured for HZ = 250:
>
> /proc/version:
>
> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
> [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
> 16:37:58 EST 2009
>
>
> scripts/ver_linux:
>
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
> i386 GNU/Linux
>
> Gnu C 4.3
> Gnu make 3.81
> binutils 11.0
> 2.18.50.20080409
> 11.1
> util-linux 2.13.1
> mount 2.13.1
> module-init-tools 3.4
> e2fsprogs 1.40.8
> reiserfsprogs 3.6.19
> PPP 2.4.4
> Linux C Library 2.8
> Dynamic linker (ldd) 2.8
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 6.11
> udev 120
> wireless-tools 29
> Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
> snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
> ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
> nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
> nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
> snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
> i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
> snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
> sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
> atiixp ide_core ahci pata_jmicron libata scsi_mod dock
>
>
> /proc/cpuinfo:
>
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
judging from the processor name string it looks like your BIOS doesn't
program the processor name properly which could mean that you need
to check whether your motherboard supports Phenom II CPUs and if so,
upgrade your BIOS. This could also explain the mis-calibration issue.
Also, is this a 32-bit kernel you're booting?
[.. ]
--
Regards/Gruss,
Boris.
Advanced Micro Devices, Inc.
Operating System Research Center
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-19 12:41 ` Bartlomiej Zolnierkiewicz
@ 2009-01-19 14:45 ` Mark Hounschell
2009-01-19 23:05 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-19 14:45 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: Mark Hounschell, linux-kernel
Bartlomiej Zolnierkiewicz wrote:
> On Monday 19 January 2009, Mark Hounschell wrote:
>> Mark Hounschell wrote:
>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>
>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>
>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>> indicated below in the dmesg output.
>>>
>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>
>> The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured
>> kernel. Sorry.
>>
>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>
> [...]
>
>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>>
>>>
>>> The 2.6.26.8 kernel hangs up right here.
>>>
>>>
>>> CPA: page pool initialized 1 of 1 pages preallocated
>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>> hpet clockevent registered
>>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>>> Probably due to long platform interrupts. Consider using "lpj=" boot option.
>>> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
>
> Even if it boots it may not work reliably since lpj/BogoMIPS are too small
> (they should be the same as for other CPUs) which in turn could result in too
> short delay loops.
>
>>> Security Framework initialized
>>> Capability LSM initialized
>>> Mount-cache hash table entries: 512
>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>> CPU: L2 Cache: 512K (64 bytes/line)
>>> CPU 0(4) -> Core 0
>>> Checking 'hlt' instruction... OK.
>>> ACPI: Core revision 20080321
>>> ENABLING IO-APIC IRQs
>>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>>> CPU0: AMD Processor model unknown stepping 02
>>> Booting processor 1/1 ip 2000
>>> Initializing CPU#1
>>> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
>
> Here are the proper values.
>
>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>> CPU: L2 Cache: 512K (64 bytes/line)
>>> CPU 1(4) -> Core 2
>>> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>>> CPU1: AMD Processor model unknown stepping 02
>>> Booting processor 2/2 ip 2000
>>> Initializing CPU#2
>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
>
> also OK
>
>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>> CPU: L2 Cache: 512K (64 bytes/line)
>>> CPU 2(4) -> Core 1
>>> x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>>> CPU2: AMD Processor model unknown stepping 02
>>> Booting processor 3/3 ip 2000
>>> Initializing CPU#3
>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
>
> ditto
>
> That being said I don't know why delay calibration loop fails on CPU0.
>
> You may try booting with "lpj=12001200" kernel parameter to workaround
> the issue (it should fix booting with HZ == 1000) and/or try 2.6.29-rc2
> (the problem may have been already fixed).
>
> Thanks,
> Bart
>
I'll try "lpj=12001200" and 2.6.29-rc2 later when I get home this ev.
But I noticed CPU2 is different too. Is CPU1 the correct one?
>>> Initializing CPU#0
>>> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
>>> Initializing CPU#1
>>> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
>>> Initializing CPU#2
>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
>>> Initializing CPU#3
>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-19 14:22 ` Borislav Petkov
@ 2009-01-19 14:54 ` Mark Hounschell
2009-01-19 23:14 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-19 14:54 UTC (permalink / raw)
To: Borislav Petkov; +Cc: Mark Hounschell, linux-kernel
Borislav Petkov wrote:
> Hi,
>
> On Sun, Jan 18, 2009 at 07:38:36AM -0500, Mark Hounschell wrote:
>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>
>> I have tried kernels from 2.6.26 through 2.6.28.
>>
>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>> indicated below in the dmesg output.
>>
>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>
>> While running a 2.6.26.8 kernel configured for HZ = 250:
>>
>> /proc/version:
>>
>> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
>> [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
>> 16:37:58 EST 2009
>>
>>
>> scripts/ver_linux:
>>
>> If some fields are empty or look unusual you may have an old version.
>> Compare to the current minimal requirements in Documentation/Changes.
>>
>> Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
>> i386 GNU/Linux
>>
>> Gnu C 4.3
>> Gnu make 3.81
>> binutils 11.0
>> 2.18.50.20080409
>> 11.1
>> util-linux 2.13.1
>> mount 2.13.1
>> module-init-tools 3.4
>> e2fsprogs 1.40.8
>> reiserfsprogs 3.6.19
>> PPP 2.4.4
>> Linux C Library 2.8
>> Dynamic linker (ldd) 2.8
>> Procps 3.2.7
>> Net-tools 1.60
>> Kbd 1.12
>> Sh-utils 6.11
>> udev 120
>> wireless-tools 29
>> Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
>> snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
>> ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
>> nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
>> nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
>> snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
>> i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
>> snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
>> sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
>> atiixp ide_core ahci pata_jmicron libata scsi_mod dock
>>
>>
>> /proc/cpuinfo:
>>
>> processor : 0
>> vendor_id : AuthenticAMD
>> cpu family : 16
>> model : 4
>> model name : AMD Processor model unknown
>
> judging from the processor name string it looks like your BIOS doesn't
> program the processor name properly which could mean that you need
> to check whether your motherboard supports Phenom II CPUs and if so,
> upgrade your BIOS. This could also explain the mis-calibration issue.
>
> Also, is this a 32-bit kernel you're booting?
>
Yes, I am running 32 bit kernels. Also as I stated in my original post the MB
does report "AMD Processor model unknown" at post. I assume a BIOS update
will be forth coming. Actually when the Phonom-I was installed it was an upgrade
(well it turned out to be a downgrade) from an AMD X2 6400+. The BIOS at that
time reported the same thing until there was a BIOS update for it. Also FWIW,
at that time I was able to boot a HZ=1000 kernel. Don't remember looking at the
lpj values though.
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-19 14:45 ` Mark Hounschell
@ 2009-01-19 23:05 ` Mark Hounschell
0 siblings, 0 replies; 59+ messages in thread
From: Mark Hounschell @ 2009-01-19 23:05 UTC (permalink / raw)
To: markh; +Cc: Bartlomiej Zolnierkiewicz, linux-kernel
Mark Hounschell wrote:
> Bartlomiej Zolnierkiewicz wrote:
>> On Monday 19 January 2009, Mark Hounschell wrote:
>>> Mark Hounschell wrote:
>>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>>
>>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>>
>>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>>> indicated below in the dmesg output.
>>>>
>>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>>
>>> The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured
>>> kernel. Sorry.
>>>
>>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>> [...]
>>
>>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>>>
>>>>
>>>> The 2.6.26.8 kernel hangs up right here.
>>>>
>>>>
>>>> CPA: page pool initialized 1 of 1 pages preallocated
>>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>>> hpet clockevent registered
>>>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>>>> Probably due to long platform interrupts. Consider using "lpj=" boot option.
>>>> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
>> Even if it boots it may not work reliably since lpj/BogoMIPS are too small
>> (they should be the same as for other CPUs) which in turn could result in too
>> short delay loops.
>>
>>>> Security Framework initialized
>>>> Capability LSM initialized
>>>> Mount-cache hash table entries: 512
>>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>>> CPU: L2 Cache: 512K (64 bytes/line)
>>>> CPU 0(4) -> Core 0
>>>> Checking 'hlt' instruction... OK.
>>>> ACPI: Core revision 20080321
>>>> ENABLING IO-APIC IRQs
>>>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>>>> CPU0: AMD Processor model unknown stepping 02
>>>> Booting processor 1/1 ip 2000
>>>> Initializing CPU#1
>>>> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
>> Here are the proper values.
>>
>>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>>> CPU: L2 Cache: 512K (64 bytes/line)
>>>> CPU 1(4) -> Core 2
>>>> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>>>> CPU1: AMD Processor model unknown stepping 02
>>>> Booting processor 2/2 ip 2000
>>>> Initializing CPU#2
>>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
>> also OK
>>
>>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>>> CPU: L2 Cache: 512K (64 bytes/line)
>>>> CPU 2(4) -> Core 1
>>>> x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>>>> CPU2: AMD Processor model unknown stepping 02
>>>> Booting processor 3/3 ip 2000
>>>> Initializing CPU#3
>>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
>> ditto
>>
>> That being said I don't know why delay calibration loop fails on CPU0.
>>
>> You may try booting with "lpj=12001200" kernel parameter to workaround
>> the issue (it should fix booting with HZ == 1000) and/or try 2.6.29-rc2
>> (the problem may have been already fixed).
>>
>> Thanks,
>> Bart
>>
>
> I'll try "lpj=12001200" and 2.6.29-rc2 later when I get home this ev.
>
> But I noticed CPU2 is different too. Is CPU1 the correct one?
>
>>>> Initializing CPU#0
>>>> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
>
>>>> Initializing CPU#1
>>>> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
>
>>>> Initializing CPU#2
>>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
>
>>>> Initializing CPU#3
>>>> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
>
None of the lpj values made any difference. 2.6.29-rc2 did print a couple more
messages. The last one was
Using C1E aware idle routine
Checking 'hlt' in
Surely I can't be the only Linux user with this processor???
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-19 14:54 ` Mark Hounschell
@ 2009-01-19 23:14 ` Mark Hounschell
0 siblings, 0 replies; 59+ messages in thread
From: Mark Hounschell @ 2009-01-19 23:14 UTC (permalink / raw)
To: markh; +Cc: Borislav Petkov, linux-kernel
Mark Hounschell wrote:
> Borislav Petkov wrote:
>> Hi,
>>
>> On Sun, Jan 18, 2009 at 07:38:36AM -0500, Mark Hounschell wrote:
>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>
>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>
>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>> indicated below in the dmesg output.
>>>
>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>
>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>>>
>>> /proc/version:
>>>
>>> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
>>> [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
>>> 16:37:58 EST 2009
>>>
>>>
>>> scripts/ver_linux:
>>>
>>> If some fields are empty or look unusual you may have an old version.
>>> Compare to the current minimal requirements in Documentation/Changes.
>>>
>>> Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
>>> i386 GNU/Linux
>>>
>>> Gnu C 4.3
>>> Gnu make 3.81
>>> binutils 11.0
>>> 2.18.50.20080409
>>> 11.1
>>> util-linux 2.13.1
>>> mount 2.13.1
>>> module-init-tools 3.4
>>> e2fsprogs 1.40.8
>>> reiserfsprogs 3.6.19
>>> PPP 2.4.4
>>> Linux C Library 2.8
>>> Dynamic linker (ldd) 2.8
>>> Procps 3.2.7
>>> Net-tools 1.60
>>> Kbd 1.12
>>> Sh-utils 6.11
>>> udev 120
>>> wireless-tools 29
>>> Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
>>> snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
>>> ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
>>> nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
>>> nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
>>> snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
>>> i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
>>> snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
>>> sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
>>> atiixp ide_core ahci pata_jmicron libata scsi_mod dock
>>>
>>>
>>> /proc/cpuinfo:
>>>
>>> processor : 0
>>> vendor_id : AuthenticAMD
>>> cpu family : 16
>>> model : 4
>>> model name : AMD Processor model unknown
>> judging from the processor name string it looks like your BIOS doesn't
>> program the processor name properly which could mean that you need
>> to check whether your motherboard supports Phenom II CPUs and if so,
>> upgrade your BIOS. This could also explain the mis-calibration issue.
>>
>> Also, is this a 32-bit kernel you're booting?
>>
>
> Yes, I am running 32 bit kernels. Also as I stated in my original post the MB
> does report "AMD Processor model unknown" at post. I assume a BIOS update
> will be forth coming. Actually when the Phonom-I was installed it was an upgrade
> (well it turned out to be a downgrade) from an AMD X2 6400+. The BIOS at that
> time reported the same thing until there was a BIOS update for it. Also FWIW,
> at that time I was able to boot a HZ=1000 kernel. Don't remember looking at the
> lpj values though.
>
I'm waiting for a response from the MFGR, but I doubt I will actually hear from
them. Like I said above, the Phenom-I worked (or at least seemed to) before they
provided a BIOS update for it.
Somehow I don't think "the boot issue" is a mis-calibration issue. As it boots
now with a 250Hz kernel, it is still mis-calibrated for cpu0, but still boots.
Initializing CPU#0
Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
Initializing CPU#2
Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
Initializing CPU#3
Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-18 12:38 PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor Mark Hounschell
2009-01-19 8:48 ` Mark Hounschell
2009-01-19 14:22 ` Borislav Petkov
@ 2009-01-20 0:25 ` john stultz
2009-01-20 9:08 ` Mark Hounschell
2 siblings, 1 reply; 59+ messages in thread
From: john stultz @ 2009-01-20 0:25 UTC (permalink / raw)
To: Mark Hounschell; +Cc: linux-kernel, Mark Hounschell, Thomas Gleixner
On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <dmarkh@cfl.rr.com> wrote:
> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>
> I have tried kernels from 2.6.26 through 2.6.28.
>
> I _can_ however boot these kernels when they are configured for HZ = 250. I
> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> indicated below in the dmesg output.
>
> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>
> While running a 2.6.26.8 kernel configured for HZ = 250:
[snip]
> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>
>
> The 2.6.26.8 kernel hangs up right here.
>
>
> CPA: page pool initialized 1 of 1 pages preallocated
> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> hpet clockevent registered
> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
This looks suspect. Probably something is off with the timer
interrupt, that's causing the calibration to be way off.
Does booting with hpet=disable change anything?
thanks
-john
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-20 0:25 ` john stultz
@ 2009-01-20 9:08 ` Mark Hounschell
2009-01-20 9:37 ` Andreas Herrmann
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-20 9:08 UTC (permalink / raw)
To: john stultz; +Cc: linux-kernel, Mark Hounschell, Thomas Gleixner
john stultz wrote:
> On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <dmarkh@cfl.rr.com> wrote:
>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>
>> I have tried kernels from 2.6.26 through 2.6.28.
>>
>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>> indicated below in the dmesg output.
>>
>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>
>> While running a 2.6.26.8 kernel configured for HZ = 250:
> [snip]
>> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
>> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
>> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
>> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
>> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>
>>
>> The 2.6.26.8 kernel hangs up right here.
>>
>>
>> CPA: page pool initialized 1 of 1 pages preallocated
>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>> hpet clockevent registered
>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>
> This looks suspect. Probably something is off with the timer
> interrupt, that's causing the calibration to be way off.
>
> Does booting with hpet=disable change anything?
>
> thanks
> -john
John,
I tried this with 2.6.26, 2.6.28, and 2.6.29-rc2. It didn't change anything.
thanks
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-20 9:08 ` Mark Hounschell
@ 2009-01-20 9:37 ` Andreas Herrmann
2009-01-20 21:08 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Andreas Herrmann @ 2009-01-20 9:37 UTC (permalink / raw)
To: Mark Hounschell
Cc: john stultz, linux-kernel, Mark Hounschell, Thomas Gleixner,
Borislav Petkov
On Tue, Jan 20, 2009 at 04:08:41AM -0500, Mark Hounschell wrote:
> john stultz wrote:
> > On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <dmarkh@cfl.rr.com> wrote:
> >> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
> >>
> >> I have tried kernels from 2.6.26 through 2.6.28.
> >>
> >> I _can_ however boot these kernels when they are configured for HZ = 250. I
> >> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> >> indicated below in the dmesg output.
> >>
> >> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
> >>
> >> While running a 2.6.26.8 kernel configured for HZ = 250:
> > [snip]
> >> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
> >> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
> >> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
> >> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
> >> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
> >> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> >>
> >>
> >> The 2.6.26.8 kernel hangs up right here.
> >>
> >>
> >> CPA: page pool initialized 1 of 1 pages preallocated
> >> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> >> hpet clockevent registered
> >> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
> >
> > This looks suspect. Probably something is off with the timer
> > interrupt, that's causing the calibration to be way off.
> >
> > Does booting with hpet=disable change anything?
> >
> > thanks
> > -john
>
> John,
>
> I tried this with 2.6.26, 2.6.28, and 2.6.29-rc2. It didn't change anything.
Hi Mark,
I just want to second what Boris already stated.
Obviously your BIOS doesn't properly initialize your CPU.
Your BIOS programs the processor name string as
"AMD Processor model unknown"
I would have expected to see something like "AMD Phenom(tm) II X4"
This shows that the BIOS doesn't know your CPU model and it is an
indication that your CPU is not correctly initialized. Phenom II is a
different CPU model than Phenom and several configuration bits
(e.g. MSRs, CPU config space) need different settings from BIOS
or they even were reserved in previous family 10h CPU models.
IMHO it is a waste of time to try to debug/fix your problem from OS.
First you should update your BIOS. You need to check the "CPU
support"-information from your motherboard vendor to see whether your
motherboard supports Phenom II and which BIOS is required.
If you know that your BIOS/motherboard are supposed to support Phenom II
and the problem persists then it is a different game and we should
definitely look into your problem.
So what's your BIOS version and motherboard vendor/model?
(And output of dmidecode would be helpful.)
Regards,
Andreas
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-20 9:37 ` Andreas Herrmann
@ 2009-01-20 21:08 ` Mark Hounschell
2009-01-23 9:34 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-20 21:08 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Mark Hounschell, john stultz, linux-kernel, Thomas Gleixner,
Borislav Petkov
Andreas Herrmann wrote:
> On Tue, Jan 20, 2009 at 04:08:41AM -0500, Mark Hounschell wrote:
>> john stultz wrote:
>>> On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <dmarkh@cfl.rr.com> wrote:
>>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>>
>>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>>
>>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>>> indicated below in the dmesg output.
>>>>
>>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>>
>>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>>> [snip]
>>>> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
>>>> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
>>>> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
>>>> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
>>>> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
>>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>>>
>>>>
>>>> The 2.6.26.8 kernel hangs up right here.
>>>>
>>>>
>>>> CPA: page pool initialized 1 of 1 pages preallocated
>>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>>> hpet clockevent registered
>>>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>>> This looks suspect. Probably something is off with the timer
>>> interrupt, that's causing the calibration to be way off.
>>>
>>> Does booting with hpet=disable change anything?
>>>
>>> thanks
>>> -john
>> John,
>>
>> I tried this with 2.6.26, 2.6.28, and 2.6.29-rc2. It didn't change anything.
>
> Hi Mark,
>
> I just want to second what Boris already stated.
> Obviously your BIOS doesn't properly initialize your CPU.
>
> Your BIOS programs the processor name string as
> "AMD Processor model unknown"
>
> I would have expected to see something like "AMD Phenom(tm) II X4"
>
> This shows that the BIOS doesn't know your CPU model and it is an
> indication that your CPU is not correctly initialized. Phenom II is a
> different CPU model than Phenom and several configuration bits
> (e.g. MSRs, CPU config space) need different settings from BIOS
> or they even were reserved in previous family 10h CPU models.
>
> IMHO it is a waste of time to try to debug/fix your problem from OS.
> First you should update your BIOS. You need to check the "CPU
> support"-information from your motherboard vendor to see whether your
> motherboard supports Phenom II and which BIOS is required.
>
Understood and agreed with.
> If you know that your BIOS/motherboard are supposed to support Phenom II
> and the problem persists then it is a different game and we should
> definitely look into your problem.
>
> So what's your BIOS version and motherboard vendor/model?
> (And output of dmidecode would be helpful.)
>
>
The MB is a Biostar TA770+. It is not yet listed as one with new
BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
The only difference in the Sata port arrangement and the BIOS type.
I guess I'll just keep pinging them.
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-20 21:08 ` Mark Hounschell
@ 2009-01-23 9:34 ` Mark Hounschell
2009-01-23 13:04 ` Andreas Herrmann
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-23 9:34 UTC (permalink / raw)
To: markh
Cc: Andreas Herrmann, john stultz, linux-kernel, Thomas Gleixner,
Borislav Petkov
Mark Hounschell wrote:
> Andreas Herrmann wrote:
>> On Tue, Jan 20, 2009 at 04:08:41AM -0500, Mark Hounschell wrote:
>>> john stultz wrote:
>>>> On Sun, Jan 18, 2009 at 4:38 AM, Mark Hounschell <dmarkh@cfl.rr.com> wrote:
>>>>> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>>>>>
>>>>> I have tried kernels from 2.6.26 through 2.6.28.
>>>>>
>>>>> I _can_ however boot these kernels when they are configured for HZ = 250. I
>>>>> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
>>>>> indicated below in the dmesg output.
>>>>>
>>>>> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>>>>>
>>>>> While running a 2.6.26.8 kernel configured for HZ = 250:
>>>> [snip]
>>>>> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
>>>>> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
>>>>> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
>>>>> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
>>>>> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
>>>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>>>>
>>>>>
>>>>> The 2.6.26.8 kernel hangs up right here.
>>>>>
>>>>>
>>>>> CPA: page pool initialized 1 of 1 pages preallocated
>>>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>>>> hpet clockevent registered
>>>>> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
>>>> This looks suspect. Probably something is off with the timer
>>>> interrupt, that's causing the calibration to be way off.
>>>>
>>>> Does booting with hpet=disable change anything?
>>>>
>>>> thanks
>>>> -john
>>> John,
>>>
>>> I tried this with 2.6.26, 2.6.28, and 2.6.29-rc2. It didn't change anything.
>> Hi Mark,
>>
>> I just want to second what Boris already stated.
>> Obviously your BIOS doesn't properly initialize your CPU.
>>
>> Your BIOS programs the processor name string as
>> "AMD Processor model unknown"
>>
>> I would have expected to see something like "AMD Phenom(tm) II X4"
>>
>> This shows that the BIOS doesn't know your CPU model and it is an
>> indication that your CPU is not correctly initialized. Phenom II is a
>> different CPU model than Phenom and several configuration bits
>> (e.g. MSRs, CPU config space) need different settings from BIOS
>> or they even were reserved in previous family 10h CPU models.
>>
>> IMHO it is a waste of time to try to debug/fix your problem from OS.
>> First you should update your BIOS. You need to check the "CPU
>> support"-information from your motherboard vendor to see whether your
>> motherboard supports Phenom II and which BIOS is required.
>>
>
> Understood and agreed with.
>
>> If you know that your BIOS/motherboard are supposed to support Phenom II
>> and the problem persists then it is a different game and we should
>> definitely look into your problem.
>>
>> So what's your BIOS version and motherboard vendor/model?
>> (And output of dmidecode would be helpful.)
>>
>>
>
> The MB is a Biostar TA770+. It is not yet listed as one with new
> BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
> The only difference in the Sata port arrangement and the BIOS type.
>
> I guess I'll just keep pinging them.
>
> Regards
> Mark
>
OK I have now the official bios for this CPU/MB combo. I still cannot boot a
1000 HZ kernel. Here is my new dmesg while running a 250Hz kernel.
Initializing cgroup subsys cpuset
Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
[gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
16:37:58 EST 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3264MB HIGHMEM available.
832MB LOWMEM available.
found SMP MP-table at [c00f3f00] 000f3f00
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 212992
HighMem 212992 -> 1048576
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1632 pages used for memmap
Normal zone: 207264 pages, LIFO batch:31
HighMem zone: 6528 pages used for memmap
HighMem zone: 829056 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.5 present.
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 38788 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
noresume splash=silent bigphysarea=0x4000 vmalloc=192M vga=0x317
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3000.279 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3031940k/4194304k available (1748k kernel code, 112564k reserved, 732k
data, 216k init, 2293632k highmem)
virtual kernel memory layout:
fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
.init : 0xc0373000 - 0xc03a9000 ( 216 kB)
.data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
.text : 0xc0100000 - 0xc02b5336 (1748 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
Probably due to long platform interrupts. Consider using "lpj=" boot option.
Calibrating delay loop... 3948.54 BogoMIPS (lpj=7897088)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(4) -> Core 0
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080321
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
Booting processor 1/1 ip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.48 BogoMIPS (lpj=12000961)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(4) -> Core 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
Booting processor 2/2 ip 2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6000.48 BogoMIPS (lpj=12000966)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2(4) -> Core 2
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
Booting processor 3/3 ip 2000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6000.48 BogoMIPS (lpj=12000974)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3(4) -> Core 3
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
Brought up 4 CPUs
Total of 4 processors activated (21949.99 BogoMIPS).
net_namespace: 660 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:12.0: set SATA to AHCI mode
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0d: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3
(0xe0000000-0xffffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
system 00:01: ioport range 0x4100-0x411f has been reserved
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd0-0xcd1 has been reserved
system 00:01: ioport range 0xcd2-0xcd3 has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:01: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x220-0x225 has been reserved
system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
system 00:0d: iomem range 0x0-0x1fffff could not be reserved
system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0xbffdffff could not be reserved
PCI: Bridge: 0000:00:02.0
IO window: d000-dfff
MEM window: 0xf8000000-0xfbffffff
PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:04.0
IO window: c000-cfff
MEM window: 0xfdc00000-0xfdcfffff
PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
PCI: Bridge: 0000:00:06.0
IO window: b000-bfff
MEM window: 0xfda00000-0xfdafffff
PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
PCI: Bridge: 0000:00:07.0
IO window: e000-efff
MEM window: 0xfde00000-0xfdefffff
PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: 0xfd900000-0xfd9fffff
PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 10039k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1232684854.924:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
bigphysarea: Allocated 16384 pages at 0xc3038000.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1462
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
vesafb: framebuffer at 0xf9000000, mapped to 0xf4880000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:b0a0
vesafb: pmi: set display start = c00cb103, set palette = c00cb15e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0
3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
logips2pp: Detected unknown logitech mouse model 11
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
Using IPI No-Shortcut mode
Freeing unused kernel memory: 216k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
ahci 0000:00:12.0: version 3.0
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata5: failed due to HW bug, retry pmp=0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
SB600_PATA: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907
Probing IDE interface ide0...
hda: ST3120023A, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 21 (level, low) -> IRQ 21
scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
scsi 8:0:0:0: Direct-Access SEAGATE ST15150N 5052 PQ: 0 ANSI: 2
scsi8:A:0:0: Tagged Queuing enabled. Depth 32
target8:0:0: Beginning Domain Validation
target8:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
target8:0:0: Domain Validation skipping write tests
target8:0:0: Ending Domain Validation
scsi 8:0:2:0: Sequential-Access ARCHIVE Python 01931-XXX 5.63 PQ: 0 ANSI: 2
target8:0:2: Beginning Domain Validation
target8:0:2: FAST-10 SCSI 7.8 MB/s ST (128 ns, offset 15)
target8:0:2: Domain Validation skipping write tests
target8:0:2: Ending Domain Validation
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 0000:04:00.0: v1.21 addr 0xfdefc000 irq 19 Yukon-EC Ultra (0xb4) rev 5
sky2 eth0: addr 00:e0:4d:7a:8c:ee
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda:<6>usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
sda1 sda2 sda3 <<6>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus
number 1
sda5<6>ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
sda6<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
sda7<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
sda8<6>hub 1-0:1.0: USB hub found
sda9<6>hub 1-0:1.0: 10 ports detected
sda10 >
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7<6>usb usb1: New USB device found,
idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
sdb8<6>usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26.8-lcrs ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
sdb9<6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
sdb10 >
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdc: sdc1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 4:0:0:0: [sdc] Attached SCSI disk
sd 8:0:0:0: [sdd] Unsupported sector size 768.
sd 8:0:0:0: [sdd] 0 512-byte hardware sectors (0 MB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: ab 00 10 08
sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 8:0:0:0: [sdd] Attached SCSI disk
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=03f0, idProduct=5111
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Photosmart 3200 series
usb 1-1: Manufacturer: HP
usb 1-1: SerialNumber: MY5B98310Z045K
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb usb4: SerialNumber: 0000:00:13.2
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb 1-2: New USB device found, idVendor=0424, idProduct=2504
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: Attached scsi generic sg3 type 0
scsi 8:0:2:0: Attached scsi generic sg4 type 1
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
Linux agpgart interface v0.103
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
usbcore: registered new interface driver usblp
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
st 8:0:2:0: Attached scsi tape st0
st 8:0:2:0: st0: try direct i/o: yes (alignment 4 B)
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
eth1: Intel(R) PRO/1000 Network Connection
eth1: MAC: 1, PHY: 4, PBA No: d50854-003
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
ppdev: user-space parallel port driver
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.1.1.1 2009/01/04 11:41:44 markh Exp $
Driver 'osst' needs updating - please use bus_type methods
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
nvidia: module license 'NVIDIA' taints kernel.
st0: Block limits 1 - 16777215 bytes.
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a,
fline=0x0, cd=0x0, aux=0x0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: [sde] Attached SCSI removable disk
fuse init (API version 7.9)
sd 9:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
hda-intel: Invalid position buffer, using LPIB read method instead.
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-23 9:34 ` Mark Hounschell
@ 2009-01-23 13:04 ` Andreas Herrmann
2009-01-23 14:47 ` Borislav Petkov
2009-01-23 22:46 ` Mark Hounschell
0 siblings, 2 replies; 59+ messages in thread
From: Andreas Herrmann @ 2009-01-23 13:04 UTC (permalink / raw)
To: Mark Hounschell
Cc: markh, john stultz, linux-kernel, Thomas Gleixner, Petkov, Borislav
On Fri, Jan 23, 2009 at 10:34:43AM +0100, Mark Hounschell wrote:
> Mark Hounschell wrote:
> > The MB is a Biostar TA770+. It is not yet listed as one with new
> > BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
> > The only difference in the Sata port arrangement and the BIOS type.
> >
> > I guess I'll just keep pinging them.
>
> OK I have now the official bios for this CPU/MB combo. I still cannot boot a
> 1000 HZ kernel.
Looking at the Biostar pages I am still not completely convinced that
your CPU/MB combo is supported. At least it is not listed there.
So far TA770 A2+ SE, rev. 6.X, is listed. Did the Biostar folks confirm you
that your mobo model/revision is supported, too?
> Here is my new dmesg while running a 250Hz kernel.
...
> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
...
> CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
...
> CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
...
> CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
...
> CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
Looks good so far.
> eth0: no IPv6 routers present
> warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
> hda-intel: Invalid position buffer, using LPIB read method instead.
> NET: Registered protocol family 4
> NET: Registered protocol family 3
> NET: Registered protocol family 5
This reminds me of some system hangs with older kernels when C1E was
activated.
Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
when using 2.6.26.X?
Can you also try to boot .27 or .28?
Thanks,
Andreas
--
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-23 13:04 ` Andreas Herrmann
@ 2009-01-23 14:47 ` Borislav Petkov
2009-01-23 22:24 ` Mark Hounschell
2009-01-23 22:46 ` Mark Hounschell
1 sibling, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-01-23 14:47 UTC (permalink / raw)
To: Mark Hounschell
Cc: Andreas Herrmann, markh, john stultz, linux-kernel, Thomas Gleixner
Hi,
[.. ]
> Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
> when using 2.6.26.X?
> Can you also try to boot .27 or .28?
Also, can you send me the output of dmidecode please?
Thanks.
--
Regards/Gruss,
Boris.
Advanced Micro Devices, Inc.
Operating System Research Center
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-23 14:47 ` Borislav Petkov
@ 2009-01-23 22:24 ` Mark Hounschell
0 siblings, 0 replies; 59+ messages in thread
From: Mark Hounschell @ 2009-01-23 22:24 UTC (permalink / raw)
To: Borislav Petkov
Cc: Andreas Herrmann, markh, john stultz, linux-kernel, Thomas Gleixner
Borislav Petkov wrote:
> Hi,
>
> [.. ]
>
>> Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
>> when using 2.6.26.X?
>> Can you also try to boot .27 or .28?
>
> Also, can you send me the output of dmidecode please?
>
> Thanks.
>
Yes, here it is.
# dmidecode 2.9
SMBIOS 2.5 present.
54 structures occupying 2295 bytes.
Table at 0x000F0000.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 12/25/2008
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: BIOSTAR Group
Product Name: A78XA-A2T
Version: 1.0
Serial Number: Unknow
UUID: Not Present
Wake-up Type: Power Switch
SKU Number:
Family:
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: BIOSTAR Group
Product Name: TA770 A2+
Version: 1.0
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: BIOSTAR Group
Type: Desktop
Lock: Not Present
Version: A78XA-A2T
Serial Number:
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 40 bytes
Processor Information
Socket Designation: Socket AM2
Type: Central Processor
Family: 80287
Manufacturer: AMD
ID: 42 0F 10 00 FF FB 8B 17
Version: AMD Phenom(tm) II X4 940 Processor
Voltage: 1.5 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed: 3000 MHz
Status: Populated, Enabled
Upgrade: Socket 940
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000B
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Core Count: 4
Core Enabled: 4
Thread Count: 4
Characteristics:
64-bit capable
Handle 0x0005, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 16384 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
Standard
DIMM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 4
0x0006
0x0007
0x0008
0x0009
Enabled Error Correcting Capabilities: None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0 1
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A2
Bank Connections: 4 5
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A3
Bank Connections: 6 7
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 512 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Other
Port Type: USB
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Other
Port Type: USB
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Other
Port Type: USB
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB4
External Connector Type: Other
Port Type: USB
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB5
External Connector Type: Other
Port Type: USB
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB6
External Connector Type: Other
Port Type: USB
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB7
External Connector Type: Other
Port Type: USB
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB8
External Connector Type: Other
Port Type: USB
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB9
External Connector Type: Other
Port Type: USB
Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x001F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0021, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 4
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0022, DMI type 9, 13 bytes
System Slot Information
Designation: PCI-X
Type: 32-bit PCI-X
Current Usage: Available
Length: Long
ID: 1
Characteristics:
5.0 V is provided
Handle 0x0023, DMI type 9, 13 bytes
System Slot Information
Designation: PCI-X
Type: 32-bit PCI-X
Current Usage: Available
Length: Long
ID: 29
Characteristics:
5.0 V is provided
Handle 0x0024, DMI type 9, 13 bytes
System Slot Information
Designation: PCI-X
Type: 32-bit PCI-X
Current Usage: Available
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x0025, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0026, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0027, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0028, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0029, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A2
Bank Locator: Bank4/5
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A3
Bank Locator: Bank6/7
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x002B, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x0026
Partition Width: 0
Handle 0x002C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0027
Memory Array Mapped Address Handle: 0x002B
Partition Row Position: 1
Handle 0x002D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0028
Memory Array Mapped Address Handle: 0x002B
Partition Row Position: 1
Handle 0x002E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000BFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0029
Memory Array Mapped Address Handle: 0x002B
Partition Row Position: 1
Handle 0x002F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x000C0000000
Ending Address: 0x000FFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002A
Memory Array Mapped Address Handle: 0x002B
Partition Row Position: 1
Handle 0x0030, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0031, DMI type 188, 212 bytes
OEM-specific Type
Header and Data:
BC D4 31 00 00 00 00 C0 00 00 00 00 00 00 00 40
01 00 00 00 00 06 76 00 00 00 00 00 08 00 00 00
00 40 40 00 10 08 01 00 03 00 00 00 00 00 3F 01
00 00 00 00 01 00 00 00 00 00 00 00 02 00 00 00
00 00 00 00 03 00 00 00 00 00 00 00 04 00 00 00
00 00 00 00 05 00 00 00 00 00 00 00 06 00 00 00
00 00 00 00 07 00 00 00 03 40 00 C0 01 00 00 00
01 01 00 00 01 02 00 00 01 03 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 E0 3C F8 00
E0 3C F8 00 00 00 00 00 00 00 00 00 06 00 48 0B
00 00 00 00 22 00 00 00 40 00 00 00 26 99 14 0C
45 60 92 00 10 08 01 00 00 02 00 00 00 00 00 00
5C 00 B0 4A 0C 00 58 3F 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x0032, DMI type 190, 212 bytes
OEM-specific Type
Header and Data:
BE D4 32 00 10 05 00 00 00 00 00 00 24 A4 40 04
C0 0F E0 2C 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 27 00 00 00 00 00 00 00
00 00 00 00 27 5F E0 31 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x0033, DMI type 192, 244 bytes
OEM-specific Type
Header and Data:
C0 F4 33 00 06 40 00 00 22 32 11 10 20 20 2F 00
E7 88 71 0E F0 00 0C 00 22 32 11 10 11 12 11 11
11 11 12 11 11 12 11 11 11 10 10 11 11 10 12 10
11 10 10 11 11 11 00 20 20 2F 00 0E 0E 0E 0E 10
10 0E 10 0E 0E 0E 0E 0E 0E 0E 10 0E 0E 0E 0E 0E
0E 0E 10 0E 10 00 AD 36 FB 30 F0 00 0C 00 75 00
72 00 6D 00 6B 00 75 00 7C 00 79 00 73 00 71 00
7C 00 15 00 12 00 0D 00 0B 00 00 00 1C 00 19 00
13 00 11 00 00 00 6B 00 6B 00 6F 00 74 00 00 00
70 00 73 00 78 00 7C 00 00 00 0B 00 0B 00 0F 00
14 00 00 00 10 00 13 00 18 00 1C 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 14 13 13 14 14 12 13 14 13 00 00 00
98 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x0034, DMI type 194, 244 bytes
OEM-specific Type
Header and Data:
C2 F4 34 00 06 40 00 00 22 32 11 10 20 20 2F 00
63 8C 31 06 F0 00 0C 00 22 32 11 10 11 12 11 12
11 12 11 12 11 12 11 12 10 11 11 10 11 11 12 12
10 11 11 10 11 11 00 20 20 2F 00 10 0E 0E 10 10
10 0E 0E 10 0E 0E 10 0E 0E 10 10 0C 10 0E 10 0E
0E 10 10 10 10 00 EB 95 EC 2F F0 00 0C 00 76 00
73 00 6E 00 6A 00 76 00 7E 00 7B 00 76 00 72 00
7E 00 16 00 13 00 0E 00 0A 00 00 00 1E 00 1B 00
16 00 12 00 00 00 6B 00 6C 00 73 00 74 00 00 00
73 00 75 00 7C 00 7E 00 00 00 0B 00 0C 00 13 00
14 00 00 00 13 00 15 00 1C 00 1E 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 13 14 14 14 14 13 14 13 14 00 00 00
2C 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00
Handle 0x0035, DMI type 127, 4 bytes
End Of Table
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-23 13:04 ` Andreas Herrmann
2009-01-23 14:47 ` Borislav Petkov
@ 2009-01-23 22:46 ` Mark Hounschell
2009-01-26 18:26 ` Mark Hounschell
1 sibling, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-23 22:46 UTC (permalink / raw)
To: Andreas Herrmann
Cc: markh, john stultz, linux-kernel, Thomas Gleixner, Petkov, Borislav
Andreas Herrmann wrote:
> On Fri, Jan 23, 2009 at 10:34:43AM +0100, Mark Hounschell wrote:
>> Mark Hounschell wrote:
>>> The MB is a Biostar TA770+. It is not yet listed as one with new
>>> BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
>>> The only difference in the Sata port arrangement and the BIOS type.
>>>
>>> I guess I'll just keep pinging them.
>> OK I have now the official bios for this CPU/MB combo. I still cannot boot a
>> 1000 HZ kernel.
>
> Looking at the Biostar pages I am still not completely convinced that
> your CPU/MB combo is supported. At least it is not listed there.
> So far TA770 A2+ SE, rev. 6.X, is listed. Did the Biostar folks confirm you
> that your mobo model/revision is supported, too?
>
The BIOS came from http://www.biostar.cn/upload/Bios/A78XAC25.BST.rar
The BIOSTAR folks supporting the US seem to be asleep. I've never gotten an
actual response from them and have tried on 3 other occasions for other things.
>> Here is my new dmesg while running a 250Hz kernel.
>
> ...
>
>> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
> ...
>> CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
> ...
>> CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
> ...
>> CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
> ...
>> CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
>
> Looks good so far.
>
>> eth0: no IPv6 routers present
>> warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
>> hda-intel: Invalid position buffer, using LPIB read method instead.
>> NET: Registered protocol family 4
>> NET: Registered protocol family 3
>> NET: Registered protocol family 5
>
> This reminds me of some system hangs with older kernels when C1E was
> activated.
>
> Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
> when using 2.6.26.X?
> Can you also try to boot .27 or .28?
>
OK, I tried all the above on 2.6.26.8 ann 2.6.27.10. No difference.
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-23 22:46 ` Mark Hounschell
@ 2009-01-26 18:26 ` Mark Hounschell
2009-01-27 16:38 ` Borislav Petkov
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-26 18:26 UTC (permalink / raw)
To: Mark Hounschell
Cc: Andreas Herrmann, john stultz, linux-kernel, Thomas Gleixner,
Petkov, Borislav
Mark Hounschell wrote:
> Andreas Herrmann wrote:
>> On Fri, Jan 23, 2009 at 10:34:43AM +0100, Mark Hounschell wrote:
>>> Mark Hounschell wrote:
>>>> The MB is a Biostar TA770+. It is not yet listed as one with new
>>>> BIOS support for the Phenom-II. Only the TA770+ SE is at the moment.
>>>> The only difference in the Sata port arrangement and the BIOS type.
>>>>
>>>> I guess I'll just keep pinging them.
>>> OK I have now the official bios for this CPU/MB combo. I still cannot boot a
>>> 1000 HZ kernel.
>> Looking at the Biostar pages I am still not completely convinced that
>> your CPU/MB combo is supported. At least it is not listed there.
>> So far TA770 A2+ SE, rev. 6.X, is listed. Did the Biostar folks confirm you
>> that your mobo model/revision is supported, too?
>>
>
> The BIOS came from http://www.biostar.cn/upload/Bios/A78XAC25.BST.rar
>
> The BIOSTAR folks supporting the US seem to be asleep. I've never gotten an
> actual response from them and have tried on 3 other occasions for other things.
>
>>> Here is my new dmesg while running a 250Hz kernel.
>> ...
>>
>>> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
>> ...
>>> CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
>> ...
>>> CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
>> ...
>>> CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
>> ...
>>> CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
>> Looks good so far.
>>
>>> eth0: no IPv6 routers present
>>> warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
>>> hda-intel: Invalid position buffer, using LPIB read method instead.
>>> NET: Registered protocol family 4
>>> NET: Registered protocol family 3
>>> NET: Registered protocol family 5
>> This reminds me of some system hangs with older kernels when C1E was
>> activated.
>>
>> Can you please try to boot with idle=poll, or idle=mwait, or nolapic_timer
>> when using 2.6.26.X?
>> Can you also try to boot .27 or .28?
>>
>
> OK, I tried all the above on 2.6.26.8 ann 2.6.27.10. No difference.
>
> Regards
> Mark
>
If there is anything else I can try, I'm at your disposal.
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-26 18:26 ` Mark Hounschell
@ 2009-01-27 16:38 ` Borislav Petkov
2009-01-28 0:30 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-01-27 16:38 UTC (permalink / raw)
To: Mark Hounschell
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
On Mon, Jan 26, 2009 at 01:26:58PM -0500, Mark Hounschell wrote:
[.. ]
> If there is anything else I can try, I'm at your disposal.
Ok, I just boot-tested a 1000 HZ kernel here and I can't reproduce
your problem. Can you please send the failing .config. And also where
exactly does your kernel hang during the boot process, can you capture
any output and/or enable SysRq to dump backtrace on all cores (SysRq-T)
if possible. Finally, what does 'cat /proc/timer_list' on the working
kernel say?
Thanks.
--
Regards/Gruss,
Boris.
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-27 16:38 ` Borislav Petkov
@ 2009-01-28 0:30 ` Mark Hounschell
2009-01-28 0:33 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-28 0:30 UTC (permalink / raw)
To: Borislav Petkov
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 7471 bytes --]
Borislav Petkov wrote:
> On Mon, Jan 26, 2009 at 01:26:58PM -0500, Mark Hounschell wrote:
>
> [.. ]
>
>> If there is anything else I can try, I'm at your disposal.
>
> Ok, I just boot-tested a 1000 HZ kernel here and I can't reproduce
> your problem. Can you please send the failing .config. And also where
> exactly does your kernel hang during the boot process, can you capture
> any output and/or enable SysRq to dump backtrace on all cores (SysRq-T)
> if possible. Finally, what does 'cat /proc/timer_list' on the working
> kernel say?
>
> Thanks.
>
You test booted using a Phenom-II?
The config file is attached. The timer_list while running the 250 Hz 2.6.26.8
kernel output is below. When it happens I have no keyboard at all. SysRq is not
functional at this time. Sorry.
Sorry it took so long. I was out of town today.
Timer List Version: v0.3
HRTIMER_MAX_CLOCK_BASES: 2
now at 675544989236 nsecs
cpu: 0
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1233101890018929078 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
# expires at 675548000000 nsecs [in 3010764 nsecs]
.expires_next : 675548000000 nsecs
.hres_active : 1
.nr_events : 170138
.nohz_mode : 0
.idle_tick : 0 nsecs
.tick_stopped : 0
.idle_jiffies : 0
.idle_calls : 0
.idle_sleeps : 0
.idle_entrytime : 0 nsecs
.idle_waketime : 0 nsecs
.idle_exittime : 0 nsecs
.idle_sleeptime : 0 nsecs
.last_jiffies : 0
.next_jiffies : 0
.idle_expires : 0 nsecs
jiffies: 93886
cpu: 1
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1233101890018929078 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
# expires at 675548500000 nsecs [in 3510764 nsecs]
#1: <f31ffec0>, it_real_fn, S:01, do_setitimer, ntpd/4446
# expires at 676081032589 nsecs [in 536043353 nsecs]
#2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4456
# expires at 683136927993 nsecs [in 7591938757 nsecs]
#3: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, cron/4539
# expires at 711791265959 nsecs [in 36246276723 nsecs]
#4: <f31ffec0>, it_real_fn, S:01, do_setitimer, qmgr/4549
# expires at 1001716635269 nsecs [in 326171646033 nsecs]
#5: <f31ffec0>, it_real_fn, S:01, do_setitimer, master/4517
# expires at 1001716661669 nsecs [in 326171672433 nsecs]
#6: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4459
# expires at 28868136987269 nsecs [in 28192591998033 nsecs]
.expires_next : 675548500000 nsecs
.hres_active : 1
.nr_events : 169510
.nohz_mode : 0
.idle_tick : 0 nsecs
.tick_stopped : 0
.idle_jiffies : 0
.idle_calls : 0
.idle_sleeps : 0
.idle_entrytime : 0 nsecs
.idle_waketime : 0 nsecs
.idle_exittime : 0 nsecs
.idle_sleeptime : 0 nsecs
.last_jiffies : 0
.next_jiffies : 0
.idle_expires : 0 nsecs
jiffies: 93886
cpu: 2
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1233101890018929078 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
# expires at 675549000000 nsecs [in 4010764 nsecs]
#1: <f31ffec0>, it_real_fn, S:01, do_setitimer, Xorg/3325
# expires at 675563416492 nsecs [in 18427256 nsecs]
#2: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, kwrapper/4982
# expires at 676109815468 nsecs [in 564826232 nsecs]
#3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4458
# expires at 683435589386 nsecs [in 7890600150 nsecs]
#4: <f31ffec0>, it_real_fn, S:01, do_setitimer, pickup/4548
# expires at 1001716659224 nsecs [in 326171669988 nsecs]
.expires_next : 675549000000 nsecs
.hres_active : 1
.nr_events : 172253
.nohz_mode : 0
.idle_tick : 0 nsecs
.tick_stopped : 0
.idle_jiffies : 0
.idle_calls : 0
.idle_sleeps : 0
.idle_entrytime : 0 nsecs
.idle_waketime : 0 nsecs
.idle_exittime : 0 nsecs
.idle_sleeptime : 0 nsecs
.last_jiffies : 0
.next_jiffies : 0
.idle_expires : 0 nsecs
jiffies: 93886
cpu: 3
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1233101890018929078 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
# expires at 675545500000 nsecs [in 510764 nsecs]
#1: <f31ffec0>, sched_rt_period_timer, S:01, enqueue_task_rt, swapper/1
# expires at 676000000000 nsecs [in 455010764 nsecs]
#2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5123
# expires at 689314480389 nsecs [in 13769491153 nsecs]
#3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5209
# expires at 689361744389 nsecs [in 13816755153 nsecs]
#4: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4457
# expires at 3668136917342 nsecs [in 2992591928106 nsecs]
.expires_next : 675545500000 nsecs
.hres_active : 1
.nr_events : 171267
.nohz_mode : 0
.idle_tick : 0 nsecs
.tick_stopped : 0
.idle_jiffies : 0
.idle_calls : 0
.idle_sleeps : 0
.idle_entrytime : 0 nsecs
.idle_waketime : 0 nsecs
.idle_exittime : 0 nsecs
.idle_sleeptime : 0 nsecs
.last_jiffies : 0
.next_jiffies : 0
.idle_expires : 0 nsecs
jiffies: 93886
Tick Device: mode: 1
Clock Event Device: hpet
max_delta_ns: 2147483647
min_delta_ns: 5000
mult: 61496114
shift: 32
mode: 3
next_event: 9223372036854775807 nsecs
set_next_event: hpet_legacy_next_event
set_mode: hpet_legacy_set_mode
event_handler: tick_handle_oneshot_broadcast
tick_broadcast_mask: 00000000
tick_broadcast_oneshot_mask: 00000000
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 671091850
min_delta_ns: 1200
mult: 53686828
shift: 32
mode: 3
next_event: 675548000000 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 671091850
min_delta_ns: 1200
mult: 53686828
shift: 32
mode: 3
next_event: 675548500000 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 671091850
min_delta_ns: 1200
mult: 53686828
shift: 32
mode: 3
next_event: 675549000000 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 671091850
min_delta_ns: 1200
mult: 53686828
shift: 32
mode: 3
next_event: 675545500000 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
Regards
Mark
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 88745 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26.8
# Tue Jan 27 18:47:38 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_CLASSIC_RCU is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
# CONFIG_IRQBALANCE is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=m
# CONFIG_ACPI_BAY is not set
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=2001
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_ONENAND_SIM is not set
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=64000
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_TC1100_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_EEEPC_LAPTOP=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=m
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_HPT34X=m
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=m
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
CONFIG_BLK_DEV_UMC8672=m
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_LEGACY=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_WINBOND_VLB=m
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_CS89x0=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_E1000E_ENABLED=y
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_CHELSIO_T3=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_SFC=m
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
CONFIG_SMCTR=m
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
# CONFIG_ARLAN is not set
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLCORE=m
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLWIFI_RFKILL is not set
CONFIG_IWL4965=m
# CONFIG_IWL4965_HT is not set
# CONFIG_IWL4965_LEDS is not set
# CONFIG_IWL4965_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL4965_SENSITIVITY is not set
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWL3945=m
# CONFIG_IWL3945_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL3945_LEDS is not set
# CONFIG_IWL3945_DEBUG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
# CONFIG_COSA is not set
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300 is not set
CONFIG_PC300TOO=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
# CONFIG_SBNI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_HYSDN=m
# CONFIG_HYSDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_GIGASET_UNDOCREQ=y
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
# CONFIG_TOUCHSCREEN_WM9712 is not set
# CONFIG_TOUCHSCREEN_WM9713 is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_PCF8575=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_LM70_LLP=m
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
# CONFIG_SBC7240_WDT is not set
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
# CONFIG_DVB_USB_CXUSB is not set
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LTV350QV is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
#
# Generic devices
#
CONFIG_SND_PCSP=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AD1848_LIB=m
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
#
# ISA devices
#
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
CONFIG_SND_DT019X=m
CONFIG_SND_ES968=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
# CONFIG_SND_SC6000 is not set
CONFIG_SND_GUS_SYNTH=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
# CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
# CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL is not set
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
# CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# SPI devices
#
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
# CONFIG_HID_SUPPORT is not set
CONFIG_HID=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1760_PCI is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_CLEVO_MAIL=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_SMX=m
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_SELINUX is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-28 0:30 ` Mark Hounschell
@ 2009-01-28 0:33 ` Mark Hounschell
2009-01-31 9:15 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-28 0:33 UTC (permalink / raw)
To: Borislav Petkov
Cc: Mark Hounschell, Mark Hounschell, Andreas Herrmann, john stultz,
linux-kernel, Thomas Gleixner
Mark Hounschell wrote:
> Borislav Petkov wrote:
>> On Mon, Jan 26, 2009 at 01:26:58PM -0500, Mark Hounschell wrote:
>>
>> [.. ]
>>
>>> If there is anything else I can try, I'm at your disposal.
>> Ok, I just boot-tested a 1000 HZ kernel here and I can't reproduce
>> your problem. Can you please send the failing .config. And also where
>> exactly does your kernel hang during the boot process, can you capture
>> any output and/or enable SysRq to dump backtrace on all cores (SysRq-T)
>> if possible. Finally, what does 'cat /proc/timer_list' on the working
>> kernel say?
>>
>> Thanks.
>>
>
>
> You test booted using a Phenom-II?
>
> The config file is attached. The timer_list while running the 250 Hz 2.6.26.8
> kernel output is below. When it happens I have no keyboard at all. SysRq is not
> functional at this time. Sorry.
>
> Sorry it took so long. I was out of town today.
>
> Timer List Version: v0.3
> HRTIMER_MAX_CLOCK_BASES: 2
> now at 675544989236 nsecs
>
> cpu: 0
> clock 0:
> .index: 0
> .resolution: 1 nsecs
> .get_time: ktime_get_real
> .offset: 1233101890018929078 nsecs
> active timers:
> clock 1:
> .index: 1
> .resolution: 1 nsecs
> .get_time: ktime_get
> .offset: 0 nsecs
> active timers:
> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
> # expires at 675548000000 nsecs [in 3010764 nsecs]
> .expires_next : 675548000000 nsecs
> .hres_active : 1
> .nr_events : 170138
> .nohz_mode : 0
> .idle_tick : 0 nsecs
> .tick_stopped : 0
> .idle_jiffies : 0
> .idle_calls : 0
> .idle_sleeps : 0
> .idle_entrytime : 0 nsecs
> .idle_waketime : 0 nsecs
> .idle_exittime : 0 nsecs
> .idle_sleeptime : 0 nsecs
> .last_jiffies : 0
> .next_jiffies : 0
> .idle_expires : 0 nsecs
> jiffies: 93886
>
> cpu: 1
> clock 0:
> .index: 0
> .resolution: 1 nsecs
> .get_time: ktime_get_real
> .offset: 1233101890018929078 nsecs
> active timers:
> clock 1:
> .index: 1
> .resolution: 1 nsecs
> .get_time: ktime_get
> .offset: 0 nsecs
> active timers:
> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
> # expires at 675548500000 nsecs [in 3510764 nsecs]
> #1: <f31ffec0>, it_real_fn, S:01, do_setitimer, ntpd/4446
> # expires at 676081032589 nsecs [in 536043353 nsecs]
> #2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4456
> # expires at 683136927993 nsecs [in 7591938757 nsecs]
> #3: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, cron/4539
> # expires at 711791265959 nsecs [in 36246276723 nsecs]
> #4: <f31ffec0>, it_real_fn, S:01, do_setitimer, qmgr/4549
> # expires at 1001716635269 nsecs [in 326171646033 nsecs]
> #5: <f31ffec0>, it_real_fn, S:01, do_setitimer, master/4517
> # expires at 1001716661669 nsecs [in 326171672433 nsecs]
> #6: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4459
> # expires at 28868136987269 nsecs [in 28192591998033 nsecs]
> .expires_next : 675548500000 nsecs
> .hres_active : 1
> .nr_events : 169510
> .nohz_mode : 0
> .idle_tick : 0 nsecs
> .tick_stopped : 0
> .idle_jiffies : 0
> .idle_calls : 0
> .idle_sleeps : 0
> .idle_entrytime : 0 nsecs
> .idle_waketime : 0 nsecs
> .idle_exittime : 0 nsecs
> .idle_sleeptime : 0 nsecs
> .last_jiffies : 0
> .next_jiffies : 0
> .idle_expires : 0 nsecs
> jiffies: 93886
>
> cpu: 2
> clock 0:
> .index: 0
> .resolution: 1 nsecs
> .get_time: ktime_get_real
> .offset: 1233101890018929078 nsecs
> active timers:
> clock 1:
> .index: 1
> .resolution: 1 nsecs
> .get_time: ktime_get
> .offset: 0 nsecs
> active timers:
> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
> # expires at 675549000000 nsecs [in 4010764 nsecs]
> #1: <f31ffec0>, it_real_fn, S:01, do_setitimer, Xorg/3325
> # expires at 675563416492 nsecs [in 18427256 nsecs]
> #2: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, kwrapper/4982
> # expires at 676109815468 nsecs [in 564826232 nsecs]
> #3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4458
> # expires at 683435589386 nsecs [in 7890600150 nsecs]
> #4: <f31ffec0>, it_real_fn, S:01, do_setitimer, pickup/4548
> # expires at 1001716659224 nsecs [in 326171669988 nsecs]
> .expires_next : 675549000000 nsecs
> .hres_active : 1
> .nr_events : 172253
> .nohz_mode : 0
> .idle_tick : 0 nsecs
> .tick_stopped : 0
> .idle_jiffies : 0
> .idle_calls : 0
> .idle_sleeps : 0
> .idle_entrytime : 0 nsecs
> .idle_waketime : 0 nsecs
> .idle_exittime : 0 nsecs
> .idle_sleeptime : 0 nsecs
> .last_jiffies : 0
> .next_jiffies : 0
> .idle_expires : 0 nsecs
> jiffies: 93886
>
> cpu: 3
> clock 0:
> .index: 0
> .resolution: 1 nsecs
> .get_time: ktime_get_real
> .offset: 1233101890018929078 nsecs
> active timers:
> clock 1:
> .index: 1
> .resolution: 1 nsecs
> .get_time: ktime_get
> .offset: 0 nsecs
> active timers:
> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
> # expires at 675545500000 nsecs [in 510764 nsecs]
> #1: <f31ffec0>, sched_rt_period_timer, S:01, enqueue_task_rt, swapper/1
> # expires at 676000000000 nsecs [in 455010764 nsecs]
> #2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5123
> # expires at 689314480389 nsecs [in 13769491153 nsecs]
> #3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5209
> # expires at 689361744389 nsecs [in 13816755153 nsecs]
> #4: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4457
> # expires at 3668136917342 nsecs [in 2992591928106 nsecs]
> .expires_next : 675545500000 nsecs
> .hres_active : 1
> .nr_events : 171267
> .nohz_mode : 0
> .idle_tick : 0 nsecs
> .tick_stopped : 0
> .idle_jiffies : 0
> .idle_calls : 0
> .idle_sleeps : 0
> .idle_entrytime : 0 nsecs
> .idle_waketime : 0 nsecs
> .idle_exittime : 0 nsecs
> .idle_sleeptime : 0 nsecs
> .last_jiffies : 0
> .next_jiffies : 0
> .idle_expires : 0 nsecs
> jiffies: 93886
>
>
> Tick Device: mode: 1
> Clock Event Device: hpet
> max_delta_ns: 2147483647
> min_delta_ns: 5000
> mult: 61496114
> shift: 32
> mode: 3
> next_event: 9223372036854775807 nsecs
> set_next_event: hpet_legacy_next_event
> set_mode: hpet_legacy_set_mode
> event_handler: tick_handle_oneshot_broadcast
> tick_broadcast_mask: 00000000
> tick_broadcast_oneshot_mask: 00000000
>
>
> Tick Device: mode: 1
> Clock Event Device: lapic
> max_delta_ns: 671091850
> min_delta_ns: 1200
> mult: 53686828
> shift: 32
> mode: 3
> next_event: 675548000000 nsecs
> set_next_event: lapic_next_event
> set_mode: lapic_timer_setup
> event_handler: hrtimer_interrupt
>
> Tick Device: mode: 1
> Clock Event Device: lapic
> max_delta_ns: 671091850
> min_delta_ns: 1200
> mult: 53686828
> shift: 32
> mode: 3
> next_event: 675548500000 nsecs
> set_next_event: lapic_next_event
> set_mode: lapic_timer_setup
> event_handler: hrtimer_interrupt
>
> Tick Device: mode: 1
> Clock Event Device: lapic
> max_delta_ns: 671091850
> min_delta_ns: 1200
> mult: 53686828
> shift: 32
> mode: 3
> next_event: 675549000000 nsecs
> set_next_event: lapic_next_event
> set_mode: lapic_timer_setup
> event_handler: hrtimer_interrupt
>
> Tick Device: mode: 1
> Clock Event Device: lapic
> max_delta_ns: 671091850
> min_delta_ns: 1200
> mult: 53686828
> shift: 32
> mode: 3
> next_event: 675545500000 nsecs
> set_next_event: lapic_next_event
> set_mode: lapic_timer_setup
> event_handler: hrtimer_interrupt
>
>
>
> Regards
> Mark
>
Oh I Forgot. The last thing I see on the screen is.
Checking if this processor honours the WP bit even in hypervisor mode... OK.
SLUB: Genslabs=12, HWalign=64, Order=0,3, MinObjects=0, CPUs=4, Nodes=1
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-28 0:33 ` Mark Hounschell
@ 2009-01-31 9:15 ` Mark Hounschell
2009-02-02 17:05 ` Borislav Petkov
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-01-31 9:15 UTC (permalink / raw)
To: Borislav Petkov
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Mark Hounschell wrote:
> Mark Hounschell wrote:
>> Borislav Petkov wrote:
>>> On Mon, Jan 26, 2009 at 01:26:58PM -0500, Mark Hounschell wrote:
>>>
>>> [.. ]
>>>
>>>> If there is anything else I can try, I'm at your disposal.
>>> Ok, I just boot-tested a 1000 HZ kernel here and I can't reproduce
>>> your problem. Can you please send the failing .config. And also where
>>> exactly does your kernel hang during the boot process, can you capture
>>> any output and/or enable SysRq to dump backtrace on all cores (SysRq-T)
>>> if possible. Finally, what does 'cat /proc/timer_list' on the working
>>> kernel say?
>>>
>>> Thanks.
>>>
>>
>> You test booted using a Phenom-II?
>>
>> The config file is attached. The timer_list while running the 250 Hz 2.6.26.8
>> kernel output is below. When it happens I have no keyboard at all. SysRq is not
>> functional at this time. Sorry.
>>
>> Sorry it took so long. I was out of town today.
>>
>> Timer List Version: v0.3
>> HRTIMER_MAX_CLOCK_BASES: 2
>> now at 675544989236 nsecs
>>
>> cpu: 0
>> clock 0:
>> .index: 0
>> .resolution: 1 nsecs
>> .get_time: ktime_get_real
>> .offset: 1233101890018929078 nsecs
>> active timers:
>> clock 1:
>> .index: 1
>> .resolution: 1 nsecs
>> .get_time: ktime_get
>> .offset: 0 nsecs
>> active timers:
>> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
>> # expires at 675548000000 nsecs [in 3010764 nsecs]
>> .expires_next : 675548000000 nsecs
>> .hres_active : 1
>> .nr_events : 170138
>> .nohz_mode : 0
>> .idle_tick : 0 nsecs
>> .tick_stopped : 0
>> .idle_jiffies : 0
>> .idle_calls : 0
>> .idle_sleeps : 0
>> .idle_entrytime : 0 nsecs
>> .idle_waketime : 0 nsecs
>> .idle_exittime : 0 nsecs
>> .idle_sleeptime : 0 nsecs
>> .last_jiffies : 0
>> .next_jiffies : 0
>> .idle_expires : 0 nsecs
>> jiffies: 93886
>>
>> cpu: 1
>> clock 0:
>> .index: 0
>> .resolution: 1 nsecs
>> .get_time: ktime_get_real
>> .offset: 1233101890018929078 nsecs
>> active timers:
>> clock 1:
>> .index: 1
>> .resolution: 1 nsecs
>> .get_time: ktime_get
>> .offset: 0 nsecs
>> active timers:
>> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
>> # expires at 675548500000 nsecs [in 3510764 nsecs]
>> #1: <f31ffec0>, it_real_fn, S:01, do_setitimer, ntpd/4446
>> # expires at 676081032589 nsecs [in 536043353 nsecs]
>> #2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4456
>> # expires at 683136927993 nsecs [in 7591938757 nsecs]
>> #3: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, cron/4539
>> # expires at 711791265959 nsecs [in 36246276723 nsecs]
>> #4: <f31ffec0>, it_real_fn, S:01, do_setitimer, qmgr/4549
>> # expires at 1001716635269 nsecs [in 326171646033 nsecs]
>> #5: <f31ffec0>, it_real_fn, S:01, do_setitimer, master/4517
>> # expires at 1001716661669 nsecs [in 326171672433 nsecs]
>> #6: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4459
>> # expires at 28868136987269 nsecs [in 28192591998033 nsecs]
>> .expires_next : 675548500000 nsecs
>> .hres_active : 1
>> .nr_events : 169510
>> .nohz_mode : 0
>> .idle_tick : 0 nsecs
>> .tick_stopped : 0
>> .idle_jiffies : 0
>> .idle_calls : 0
>> .idle_sleeps : 0
>> .idle_entrytime : 0 nsecs
>> .idle_waketime : 0 nsecs
>> .idle_exittime : 0 nsecs
>> .idle_sleeptime : 0 nsecs
>> .last_jiffies : 0
>> .next_jiffies : 0
>> .idle_expires : 0 nsecs
>> jiffies: 93886
>>
>> cpu: 2
>> clock 0:
>> .index: 0
>> .resolution: 1 nsecs
>> .get_time: ktime_get_real
>> .offset: 1233101890018929078 nsecs
>> active timers:
>> clock 1:
>> .index: 1
>> .resolution: 1 nsecs
>> .get_time: ktime_get
>> .offset: 0 nsecs
>> active timers:
>> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
>> # expires at 675549000000 nsecs [in 4010764 nsecs]
>> #1: <f31ffec0>, it_real_fn, S:01, do_setitimer, Xorg/3325
>> # expires at 675563416492 nsecs [in 18427256 nsecs]
>> #2: <f31ffec0>, hrtimer_wakeup, S:01, do_nanosleep, kwrapper/4982
>> # expires at 676109815468 nsecs [in 564826232 nsecs]
>> #3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4458
>> # expires at 683435589386 nsecs [in 7890600150 nsecs]
>> #4: <f31ffec0>, it_real_fn, S:01, do_setitimer, pickup/4548
>> # expires at 1001716659224 nsecs [in 326171669988 nsecs]
>> .expires_next : 675549000000 nsecs
>> .hres_active : 1
>> .nr_events : 172253
>> .nohz_mode : 0
>> .idle_tick : 0 nsecs
>> .tick_stopped : 0
>> .idle_jiffies : 0
>> .idle_calls : 0
>> .idle_sleeps : 0
>> .idle_entrytime : 0 nsecs
>> .idle_waketime : 0 nsecs
>> .idle_exittime : 0 nsecs
>> .idle_sleeptime : 0 nsecs
>> .last_jiffies : 0
>> .next_jiffies : 0
>> .idle_expires : 0 nsecs
>> jiffies: 93886
>>
>> cpu: 3
>> clock 0:
>> .index: 0
>> .resolution: 1 nsecs
>> .get_time: ktime_get_real
>> .offset: 1233101890018929078 nsecs
>> active timers:
>> clock 1:
>> .index: 1
>> .resolution: 1 nsecs
>> .get_time: ktime_get
>> .offset: 0 nsecs
>> active timers:
>> #0: <f31ffec0>, tick_sched_timer, S:01, tick_setup_sched_timer, swapper/0
>> # expires at 675545500000 nsecs [in 510764 nsecs]
>> #1: <f31ffec0>, sched_rt_period_timer, S:01, enqueue_task_rt, swapper/1
>> # expires at 676000000000 nsecs [in 455010764 nsecs]
>> #2: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5123
>> # expires at 689314480389 nsecs [in 13769491153 nsecs]
>> #3: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, thunderbird-bin/5209
>> # expires at 689361744389 nsecs [in 13816755153 nsecs]
>> #4: <f31ffec0>, hrtimer_wakeup, S:01, futex_wait, nscd/4457
>> # expires at 3668136917342 nsecs [in 2992591928106 nsecs]
>> .expires_next : 675545500000 nsecs
>> .hres_active : 1
>> .nr_events : 171267
>> .nohz_mode : 0
>> .idle_tick : 0 nsecs
>> .tick_stopped : 0
>> .idle_jiffies : 0
>> .idle_calls : 0
>> .idle_sleeps : 0
>> .idle_entrytime : 0 nsecs
>> .idle_waketime : 0 nsecs
>> .idle_exittime : 0 nsecs
>> .idle_sleeptime : 0 nsecs
>> .last_jiffies : 0
>> .next_jiffies : 0
>> .idle_expires : 0 nsecs
>> jiffies: 93886
>>
>>
>> Tick Device: mode: 1
>> Clock Event Device: hpet
>> max_delta_ns: 2147483647
>> min_delta_ns: 5000
>> mult: 61496114
>> shift: 32
>> mode: 3
>> next_event: 9223372036854775807 nsecs
>> set_next_event: hpet_legacy_next_event
>> set_mode: hpet_legacy_set_mode
>> event_handler: tick_handle_oneshot_broadcast
>> tick_broadcast_mask: 00000000
>> tick_broadcast_oneshot_mask: 00000000
>>
>>
>> Tick Device: mode: 1
>> Clock Event Device: lapic
>> max_delta_ns: 671091850
>> min_delta_ns: 1200
>> mult: 53686828
>> shift: 32
>> mode: 3
>> next_event: 675548000000 nsecs
>> set_next_event: lapic_next_event
>> set_mode: lapic_timer_setup
>> event_handler: hrtimer_interrupt
>>
>> Tick Device: mode: 1
>> Clock Event Device: lapic
>> max_delta_ns: 671091850
>> min_delta_ns: 1200
>> mult: 53686828
>> shift: 32
>> mode: 3
>> next_event: 675548500000 nsecs
>> set_next_event: lapic_next_event
>> set_mode: lapic_timer_setup
>> event_handler: hrtimer_interrupt
>>
>> Tick Device: mode: 1
>> Clock Event Device: lapic
>> max_delta_ns: 671091850
>> min_delta_ns: 1200
>> mult: 53686828
>> shift: 32
>> mode: 3
>> next_event: 675549000000 nsecs
>> set_next_event: lapic_next_event
>> set_mode: lapic_timer_setup
>> event_handler: hrtimer_interrupt
>>
>> Tick Device: mode: 1
>> Clock Event Device: lapic
>> max_delta_ns: 671091850
>> min_delta_ns: 1200
>> mult: 53686828
>> shift: 32
>> mode: 3
>> next_event: 675545500000 nsecs
>> set_next_event: lapic_next_event
>> set_mode: lapic_timer_setup
>> event_handler: hrtimer_interrupt
>>
>>
>>
>> Regards
>> Mark
>>
>
> Oh I Forgot. The last thing I see on the screen is.
>
> Checking if this processor honours the WP bit even in hypervisor mode... OK.
> SLUB: Genslabs=12, HWalign=64, Order=0,3, MinObjects=0, CPUs=4, Nodes=1
>
> Mark
> --
So were you able to reproduce this with my .config. Has anyone booted a Hz=1000
kernel on an AMD Phenom-II? Is there something wrong with my .config? Is there
anything else I can do?
Thanks
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-01-31 9:15 ` Mark Hounschell
@ 2009-02-02 17:05 ` Borislav Petkov
2009-02-03 9:17 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-02-02 17:05 UTC (permalink / raw)
To: Mark Hounschell
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
On Sat, Jan 31, 2009 at 04:15:58AM -0500, Mark Hounschell wrote:
[..]
>
> So were you able to reproduce this with my .config. Has anyone booted a Hz=1000
> kernel on an AMD Phenom-II? Is there something wrong with my .config? Is there
> anything else I can do?
Hi,
sorry for the delay - I've been busy last week and couldn't get to your
problem. So, I couldn't reproduce the bug here with a Phenom II and your
kernel config. However, we have a working theory, so can you please send
me the output of
xxd /sys/firmware/acpi/tables/APIC
Also, can you boot a 64-bit, HZ1000 kernel on your machine?
--
Regards/Gruss,
Boris.
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-02 17:05 ` Borislav Petkov
@ 2009-02-03 9:17 ` Mark Hounschell
2009-02-03 15:11 ` Borislav Petkov
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-03 9:17 UTC (permalink / raw)
To: Borislav Petkov
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Borislav Petkov wrote:
> On Sat, Jan 31, 2009 at 04:15:58AM -0500, Mark Hounschell wrote:
>
> [..]
>
>> So were you able to reproduce this with my .config. Has anyone booted a Hz=1000
>> kernel on an AMD Phenom-II? Is there something wrong with my .config? Is there
>> anything else I can do?
>
> Hi,
>
> sorry for the delay - I've been busy last week and couldn't get to your
> problem. So, I couldn't reproduce the bug here with a Phenom II and your
> kernel config. However, we have a working theory, so can you please send
> me the output of
>
> xxd /sys/firmware/acpi/tables/APIC
>
markh@harley:~> xxd /sys/firmware/acpi/tables/APIC
0000000: 4150 4943 8400 0000 014c 5258 3738 3020 APIC.....LRX780
0000010: 4157 5244 4143 5049 312e 3042 4157 5244 AWRDACPI1.0BAWRD
0000020: 0000 0000 0000 e0fe 0100 0000 0008 0000 ................
0000030: 0100 0000 0008 0101 0100 0000 0008 0202 ................
0000040: 0100 0000 0008 0303 0100 0000 010c 0400 ................
0000050: 0000 c0fe 0000 0000 020a 0000 0200 0000 ................
0000060: 0000 020a 0009 0900 0000 0f00 0406 0005 ................
0000070: 0001 0406 0105 0001 0406 0205 0001 0406 ................
0000080: 0305 0001
>
> Also, can you boot a 64-bit, HZ1000 kernel on your machine?
>
No, a 64 bit kernel @1000Hz doesn't boot either. As with the 32 bit kernel,
setting Hz to 250 allows it to boot. The messages are slightly different when it
hangs on the 64bit kernel at 1000Hz.
Initializing CPU#0
PID hash table entries: 4096(order: 12,32768 bytes)
TSC calibrated against PM_TIMER
time.c Detected 3000.226 Mhz processor
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @4000000 size=32MB
Aperture pointing to e820 RAM, Ignoring.
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64MB of RAM
Mapping aperture over 65536 of RAM @4000000
PM: Registered nosave memory: 0000000004000000-0000000008000000
Memory: 4053644k/5242880k available (2355k kernel code, 140144k reserved, 1400k
data, 472 init)
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-03 9:17 ` Mark Hounschell
@ 2009-02-03 15:11 ` Borislav Petkov
2009-02-03 19:15 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-02-03 15:11 UTC (permalink / raw)
To: Mark Hounschell
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Hi,
On Tue, Feb 03, 2009 at 04:17:55AM -0500, Mark Hounschell wrote:
> Borislav Petkov wrote:
> > On Sat, Jan 31, 2009 at 04:15:58AM -0500, Mark Hounschell wrote:
> >
> > [..]
> >
> >> So were you able to reproduce this with my .config. Has anyone booted a Hz=1000
> >> kernel on an AMD Phenom-II? Is there something wrong with my .config? Is there
> >> anything else I can do?
> >
> > Hi,
> >
> > sorry for the delay - I've been busy last week and couldn't get to your
> > problem. So, I couldn't reproduce the bug here with a Phenom II and your
> > kernel config. However, we have a working theory, so can you please send
> > me the output of
> >
> > xxd /sys/firmware/acpi/tables/APIC
> >
>
> markh@harley:~> xxd /sys/firmware/acpi/tables/APIC
> 0000000: 4150 4943 8400 0000 014c 5258 3738 3020 APIC.....LRX780
> 0000010: 4157 5244 4143 5049 312e 3042 4157 5244 AWRDACPI1.0BAWRD
> 0000020: 0000 0000 0000 e0fe 0100 0000 0008 0000 ................
> 0000030: 0100 0000 0008 0101 0100 0000 0008 0202 ................
> 0000040: 0100 0000 0008 0303 0100 0000 010c 0400 ................
> 0000050: 0000 c0fe 0000 0000 020a 0000 0200 0000 ................
> 0000060: 0000 020a 0009 0900 0000 0f00 0406 0005 ................
> 0000070: 0001 0406 0105 0001 0406 0205 0001 0406 ................
> 0000080: 0305 0001
looks good at a glance...
> >
> > Also, can you boot a 64-bit, HZ1000 kernel on your machine?
> >
>
> No, a 64 bit kernel @1000Hz doesn't boot either. As with the 32 bit kernel,
> setting Hz to 250 allows it to boot. The messages are slightly different when it
> hangs on the 64bit kernel at 1000Hz.
That's not cool - as I said before, I can't reproduce this behavior here
which means that the problem might be chipset-related. What you could do
now is to boot the kernel with "debug initcall_debug log_buf_len=10M"
and try to capture the whole boot log with a serial console - or if that
doesn't work - make a screenshot with a camera of some sort. This might
shed some light on the question where exactly your machine hangs.
--
Regards/Gruss,
Boris.
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-03 15:11 ` Borislav Petkov
@ 2009-02-03 19:15 ` Mark Hounschell
2009-02-05 17:19 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-03 19:15 UTC (permalink / raw)
To: Borislav Petkov
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Borislav Petkov wrote:
> Hi,
>
> On Tue, Feb 03, 2009 at 04:17:55AM -0500, Mark Hounschell wrote:
>> Borislav Petkov wrote:
>>> On Sat, Jan 31, 2009 at 04:15:58AM -0500, Mark Hounschell wrote:
>>>
>>> [..]
>>>
>>>> So were you able to reproduce this with my .config. Has anyone booted a Hz=1000
>>>> kernel on an AMD Phenom-II? Is there something wrong with my .config? Is there
>>>> anything else I can do?
>>> Hi,
>>>
>>> sorry for the delay - I've been busy last week and couldn't get to your
>>> problem. So, I couldn't reproduce the bug here with a Phenom II and your
>>> kernel config. However, we have a working theory, so can you please send
>>> me the output of
>>>
>>> xxd /sys/firmware/acpi/tables/APIC
>>>
>> markh@harley:~> xxd /sys/firmware/acpi/tables/APIC
>> 0000000: 4150 4943 8400 0000 014c 5258 3738 3020 APIC.....LRX780
>> 0000010: 4157 5244 4143 5049 312e 3042 4157 5244 AWRDACPI1.0BAWRD
>> 0000020: 0000 0000 0000 e0fe 0100 0000 0008 0000 ................
>> 0000030: 0100 0000 0008 0101 0100 0000 0008 0202 ................
>> 0000040: 0100 0000 0008 0303 0100 0000 010c 0400 ................
>> 0000050: 0000 c0fe 0000 0000 020a 0000 0200 0000 ................
>> 0000060: 0000 020a 0009 0900 0000 0f00 0406 0005 ................
>> 0000070: 0001 0406 0105 0001 0406 0205 0001 0406 ................
>> 0000080: 0305 0001
>
> looks good at a glance...
>
>>> Also, can you boot a 64-bit, HZ1000 kernel on your machine?
>>>
>> No, a 64 bit kernel @1000Hz doesn't boot either. As with the 32 bit kernel,
>> setting Hz to 250 allows it to boot. The messages are slightly different when it
>> hangs on the 64bit kernel at 1000Hz.
>
> That's not cool - as I said before, I can't reproduce this behavior here
> which means that the problem might be chipset-related. What you could do
> now is to boot the kernel with "debug initcall_debug log_buf_len=10M"
> and try to capture the whole boot log with a serial console - or if that
> doesn't work - make a screenshot with a camera of some sort. This might
> shed some light on the question where exactly your machine hangs.
>
It will be easier to capture the process on video then rip it out into a
bunch jpegs than it will be to connect the serial port. It's internal and I
don't have the adapter to bring it out the back of the case. I'll see what
I can do. It might be a couple of days but I'll get back to ya.
Thanks
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-03 19:15 ` Mark Hounschell
@ 2009-02-05 17:19 ` Mark Hounschell
2009-02-06 13:52 ` Borislav Petkov
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-05 17:19 UTC (permalink / raw)
To: markh
Cc: Borislav Petkov, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 7601 bytes --]
Mark Hounschell wrote:
> Borislav Petkov wrote:
>> Hi,
>>
>> On Tue, Feb 03, 2009 at 04:17:55AM -0500, Mark Hounschell wrote:
>>> Borislav Petkov wrote:
>>>> On Sat, Jan 31, 2009 at 04:15:58AM -0500, Mark Hounschell wrote:
>>>>
>>>> [..]
>>>>
>>>>> So were you able to reproduce this with my .config. Has anyone booted a Hz=1000
>>>>> kernel on an AMD Phenom-II? Is there something wrong with my .config? Is there
>>>>> anything else I can do?
>>>> Hi,
>>>>
>>>> sorry for the delay - I've been busy last week and couldn't get to your
>>>> problem. So, I couldn't reproduce the bug here with a Phenom II and your
>>>> kernel config. However, we have a working theory, so can you please send
>>>> me the output of
>>>>
>>>> xxd /sys/firmware/acpi/tables/APIC
>>>>
>>> markh@harley:~> xxd /sys/firmware/acpi/tables/APIC
>>> 0000000: 4150 4943 8400 0000 014c 5258 3738 3020 APIC.....LRX780
>>> 0000010: 4157 5244 4143 5049 312e 3042 4157 5244 AWRDACPI1.0BAWRD
>>> 0000020: 0000 0000 0000 e0fe 0100 0000 0008 0000 ................
>>> 0000030: 0100 0000 0008 0101 0100 0000 0008 0202 ................
>>> 0000040: 0100 0000 0008 0303 0100 0000 010c 0400 ................
>>> 0000050: 0000 c0fe 0000 0000 020a 0000 0200 0000 ................
>>> 0000060: 0000 020a 0009 0900 0000 0f00 0406 0005 ................
>>> 0000070: 0001 0406 0105 0001 0406 0205 0001 0406 ................
>>> 0000080: 0305 0001
>> looks good at a glance...
>>
>>>> Also, can you boot a 64-bit, HZ1000 kernel on your machine?
>>>>
>>> No, a 64 bit kernel @1000Hz doesn't boot either. As with the 32 bit kernel,
>>> setting Hz to 250 allows it to boot. The messages are slightly different when it
>>> hangs on the 64bit kernel at 1000Hz.
>> That's not cool - as I said before, I can't reproduce this behavior here
>> which means that the problem might be chipset-related. What you could do
>> now is to boot the kernel with "debug initcall_debug log_buf_len=10M"
>> and try to capture the whole boot log with a serial console - or if that
>> doesn't work - make a screenshot with a camera of some sort. This might
>> shed some light on the question where exactly your machine hangs.
>>
>
>Another question: does your machine boot a tickless kernel (CONFIG_NO_HZ >enabled)?
Borislav,
A tickless kernel didn't change anything. I did get a serial console connected
and below is what I got. I don't see much usefull. Attached is the config.
Press any key to continue.
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.26.8-1000Hz root=/dev/sda5 hwprobe=-modules.pata apm=off s
elinux=0 noresume splash=silent debug initcall_debug log_buf_len=10M console=tt
yS0,19200n8 vga=normal
[Linux-bzImage, setup=0x2e00, size=0x1827c0]
initrd /initrd-2.6.26.8-1000Hz
[Linux-initrd @ 0x37622000, 0x9cdf42 bytes]
Initializing cgroup subsys cpuset
Linux version 2.6.26.8-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #5 SMP PREEMPT Wed Feb9
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Warning only 4GB will be used.
Use a HIGHMEM64G enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at [c00f3f00] 000f3f00
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1048576
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 6400 pages used for memmap
HighMem zone: 812800 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.5 present.
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 0044 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: HPET BFFE8E40, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE8E80, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 38788 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
noresume splash=silent debug initcall_debug log_buf_len=10M console=ttyS0,19200l
log_buf_len: 16777216
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3360.327 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3080904k/4194304k available (1751k kernel code, 63472k reserved, 730k
data, 216k init, 2228096k highmem)
virtual kernel memory layout:
fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0373000 - 0xc03a9000 ( 216 kB)
.data : 0xc02b5ca2 - 0xc036c6d0 ( 730 kB)
.text : 0xc0100000 - 0xc02b5ca2 (1751 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Thanks
Mark
[-- Attachment #2: config_1000Hz_tickless --]
[-- Type: text/plain, Size: 88741 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26.8
# Wed Feb 4 18:17:02 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-1000Hz"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_CLASSIC_RCU is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
# CONFIG_IRQBALANCE is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=m
# CONFIG_ACPI_BAY is not set
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=2001
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_ONENAND_SIM is not set
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=64000
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_TC1100_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_EEEPC_LAPTOP=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=m
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_HPT34X=m
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=m
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
CONFIG_BLK_DEV_UMC8672=m
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_LEGACY=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_WINBOND_VLB=m
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_CS89x0=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_E1000E_ENABLED=y
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_CHELSIO_T3=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_SFC=m
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
CONFIG_SMCTR=m
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
# CONFIG_ARLAN is not set
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLCORE=m
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLWIFI_RFKILL is not set
CONFIG_IWL4965=m
# CONFIG_IWL4965_HT is not set
# CONFIG_IWL4965_LEDS is not set
# CONFIG_IWL4965_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL4965_SENSITIVITY is not set
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWL3945=m
# CONFIG_IWL3945_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL3945_LEDS is not set
# CONFIG_IWL3945_DEBUG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
# CONFIG_COSA is not set
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300 is not set
CONFIG_PC300TOO=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
# CONFIG_SBNI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_HYSDN=m
# CONFIG_HYSDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_GIGASET_UNDOCREQ=y
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
# CONFIG_TOUCHSCREEN_WM9712 is not set
# CONFIG_TOUCHSCREEN_WM9713 is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_PCF8575=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_LM70_LLP=m
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
# CONFIG_SBC7240_WDT is not set
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
# CONFIG_DVB_USB_CXUSB is not set
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LTV350QV is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
#
# Generic devices
#
CONFIG_SND_PCSP=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AD1848_LIB=m
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
#
# ISA devices
#
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
CONFIG_SND_DT019X=m
CONFIG_SND_ES968=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
# CONFIG_SND_SC6000 is not set
CONFIG_SND_GUS_SYNTH=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
# CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
# CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL is not set
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
# CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# SPI devices
#
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
# CONFIG_HID_SUPPORT is not set
CONFIG_HID=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1760_PCI is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_CLEVO_MAIL=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_SMX=m
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_SELINUX is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-05 17:19 ` Mark Hounschell
@ 2009-02-06 13:52 ` Borislav Petkov
2009-02-06 14:11 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-02-06 13:52 UTC (permalink / raw)
To: Mark Hounschell
Cc: markh, Andreas Herrmann, john stultz, linux-kernel, Thomas Gleixner
Hi,
On Thu, Feb 05, 2009 at 12:19:37PM -0500, Mark Hounschell wrote:
> A tickless kernel didn't change anything. I did get a serial console connected
> and below is what I got. I don't see much usefull. Attached is the config.
Nope, not really. It happens really early in the process for initcalls.
By the way, is the system then completely locked up or you can enter
characters from the keyboard?
> Press any key to continue.
> root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
> kernel /vmlinuz-2.6.26.8-1000Hz root=/dev/sda5 hwprobe=-modules.pata apm=off s
> elinux=0 noresume splash=silent debug initcall_debug log_buf_len=10M console=tt
> yS0,19200n8 vga=normal
> [Linux-bzImage, setup=0x2e00, size=0x1827c0]
> initrd /initrd-2.6.26.8-1000Hz
> [Linux-initrd @ 0x37622000, 0x9cdf42 bytes]
>
> Initializing cgroup subsys cpuset
> Linux version 2.6.26.8-1000Hz (root@harley) (gcc version 4.3.1 20080507
> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #5 SMP PREEMPT Wed Feb9
Is this actually a Suse distribution kernel (with a lot of patches on it) or a stock one?
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Warning only 4GB will be used.
> Use a HIGHMEM64G enabled kernel.
> 3200MB HIGHMEM available.
> 896MB LOWMEM available.
> found SMP MP-table at [c00f3f00] 000f3f00
> Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 229376
> HighMem 229376 -> 1048576
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 1048576
> On node 0 totalpages: 1048576
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 1760 pages used for memmap
> Normal zone: 223520 pages, LIFO batch:31
> HighMem zone: 6400 pages used for memmap
> HighMem zone: 812800 pages, LIFO batch:31
> Movable zone: 0 pages used for memmap
> DMI 2.5 present.
> ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
> ACPI: XSDT BFFE3080, 0044 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
> ACPI: FACS BFFE0000, 0040
> ACPI: HPET BFFE8E40, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
> ACPI: MCFG BFFE8E80, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ATI board detected. Disabling timer routing over 8254.
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 38788 bytes of per cpu data
> NR_CPUS: 32, nr_cpu_ids: 4
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
> Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
> noresume splash=silent debug initcall_debug log_buf_len=10M console=ttyS0,19200l
> log_buf_len: 16777216
> mapped APIC to ffffb000 (fee00000)
> mapped IOAPIC to ffffa000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> Preemptible RCU implementation.
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Detected 3360.327 MHz processor.
Is your CPU overclocked?
> Console: colour VGA+ 80x25
> console [ttyS0] enabled
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 3080904k/4194304k available (1751k kernel code, 63472k reserved, 730k
> data, 216k init, 2228096k highmem)
> virtual kernel memory layout:
> fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
> .data : 0xc02b5ca2 - 0xc036c6d0 ( 730 kB)
> .text : 0xc0100000 - 0xc02b5ca2 (1751 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> CPA: page pool initialized 1 of 1 pages preallocated
> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Ok, here are two things you could try:
Disable CONFIG_HIGH_RES_TIMERS (high resolution timers support in
"Processor type and features"), boot with "apic=debug" and send me the
output. I'd like to see how the lapic timer gets programmed. It would
be better for that exercise to get the latest stable kernel, 2.6.28.3,
imho.
The other thing you could do is get x86info tools from here:
http://www.codemonkey.org.uk/projects/x86info/. However, get either a
daily snapshot or a checkout from the git repository and build it on
your system. Then do
x86info -a > x86info.txt
lsmsr -V3 -a > lsmsr.txt
and send me those text files - we might be able to get a clue what's going on
from them.
Thanks.
--
Regards/Gruss,
Boris.
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-06 13:52 ` Borislav Petkov
@ 2009-02-06 14:11 ` Mark Hounschell
2009-02-06 17:55 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-06 14:11 UTC (permalink / raw)
To: Borislav Petkov
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Borislav Petkov wrote:
> Hi,
>
> On Thu, Feb 05, 2009 at 12:19:37PM -0500, Mark Hounschell wrote:
>> A tickless kernel didn't change anything. I did get a serial console connected
>> and below is what I got. I don't see much usefull. Attached is the config.
>
> Nope, not really. It happens really early in the process for initcalls.
> By the way, is the system then completely locked up or you can enter
> characters from the keyboard?
>
No. When it happens the keyboard is dead.
>> Press any key to continue.
>> root (hd0,0)
>> Filesystem type is ext2fs, partition type 0x83
>> kernel /vmlinuz-2.6.26.8-1000Hz root=/dev/sda5 hwprobe=-modules.pata apm=off s
>> elinux=0 noresume splash=silent debug initcall_debug log_buf_len=10M console=tt
>> yS0,19200n8 vga=normal
>> [Linux-bzImage, setup=0x2e00, size=0x1827c0]
>> initrd /initrd-2.6.26.8-1000Hz
>> [Linux-initrd @ 0x37622000, 0x9cdf42 bytes]
>>
>> Initializing cgroup subsys cpuset
>> Linux version 2.6.26.8-1000Hz (root@harley) (gcc version 4.3.1 20080507
>> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #5 SMP PREEMPT Wed Feb9
>
> Is this actually a Suse distribution kernel (with a lot of patches on it) or a stock one?
>
I don't use SuSE's kernels, just the dist. Every thing I'll be using while your
helping me will be
stock and not tainted.
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
>> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
>> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
>> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
>> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
>> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> Warning only 4GB will be used.
>> Use a HIGHMEM64G enabled kernel.
>> 3200MB HIGHMEM available.
>> 896MB LOWMEM available.
>> found SMP MP-table at [c00f3f00] 000f3f00
>> Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
>> Zone PFN ranges:
>> DMA 0 -> 4096
>> Normal 4096 -> 229376
>> HighMem 229376 -> 1048576
>> Movable zone start PFN for each node
>> early_node_map[1] active PFN ranges
>> 0: 0 -> 1048576
>> On node 0 totalpages: 1048576
>> DMA zone: 32 pages used for memmap
>> DMA zone: 0 pages reserved
>> DMA zone: 4064 pages, LIFO batch:0
>> Normal zone: 1760 pages used for memmap
>> Normal zone: 223520 pages, LIFO batch:31
>> HighMem zone: 6400 pages used for memmap
>> HighMem zone: 812800 pages, LIFO batch:31
>> Movable zone: 0 pages used for memmap
>> DMI 2.5 present.
>> ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
>> ACPI: XSDT BFFE3080, 0044 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
>> ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
>> ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
>> ACPI: FACS BFFE0000, 0040
>> ACPI: HPET BFFE8E40, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
>> ACPI: MCFG BFFE8E80, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
>> ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
>> ATI board detected. Disabling timer routing over 8254.
>> ACPI: PM-Timer IO Port: 0x4008
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> Enabling APIC mode: Flat. Using 1 I/O APICs
>> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>> Using ACPI (MADT) for SMP configuration information
>> Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
>> SMP: Allowing 4 CPUs, 0 hotplug CPUs
>> PERCPU: Allocating 38788 bytes of per cpu data
>> NR_CPUS: 32, nr_cpu_ids: 4
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
>> Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
>> noresume splash=silent debug initcall_debug log_buf_len=10M console=ttyS0,19200l
>> log_buf_len: 16777216
>> mapped APIC to ffffb000 (fee00000)
>> mapped IOAPIC to ffffa000 (fec00000)
>> Enabling fast FPU save and restore... done.
>> Enabling unmasked SIMD FPU exception support... done.
>> Initializing CPU#0
>> Preemptible RCU implementation.
>> PID hash table entries: 4096 (order: 12, 16384 bytes)
>> Detected 3360.327 MHz processor.
>
> Is your CPU overclocked?
>
It is as of yesterday. I am not a gamer though.
>> Console: colour VGA+ 80x25
>> console [ttyS0] enabled
>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>> Memory: 3080904k/4194304k available (1751k kernel code, 63472k reserved, 730k
>> data, 216k init, 2228096k highmem)
>> virtual kernel memory layout:
>> fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
>> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
>> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
>> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
>> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
>> .data : 0xc02b5ca2 - 0xc036c6d0 ( 730 kB)
>> .text : 0xc0100000 - 0xc02b5ca2 (1751 kB)
>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>> CPA: page pool initialized 1 of 1 pages preallocated
>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>
> Ok, here are two things you could try:
>
> Disable CONFIG_HIGH_RES_TIMERS (high resolution timers support in
> "Processor type and features"), boot with "apic=debug" and send me the
> output. I'd like to see how the lapic timer gets programmed. It would
> be better for that exercise to get the latest stable kernel, 2.6.28.3,
> imho.
>
> The other thing you could do is get x86info tools from here:
> http://www.codemonkey.org.uk/projects/x86info/. However, get either a
> daily snapshot or a checkout from the git repository and build it on
> your system. Then do
>
> x86info -a > x86info.txt
>
> lsmsr -V3 -a > lsmsr.txt
>
> and send me those text files - we might be able to get a clue what's going on
> from them.
>
> Thanks.
>
Ok, I'll do the rest of what you asked tonight.
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-06 14:11 ` Mark Hounschell
@ 2009-02-06 17:55 ` Mark Hounschell
2009-02-06 22:20 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-06 17:55 UTC (permalink / raw)
To: markh
Cc: Borislav Petkov, Mark Hounschell, Andreas Herrmann, john stultz,
linux-kernel, Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 839 bytes --]
> Borislav Petkov wrote:
>> Ok, here are two things you could try:
>>
>> Disable CONFIG_HIGH_RES_TIMERS (high resolution timers support in
>> "Processor type and features"), boot with "apic=debug" and send me the
>> output. I'd like to see how the lapic timer gets programmed. It would
>> be better for that exercise to get the latest stable kernel, 2.6.28.3,
>> imho.
>>
>> The other thing you could do is get x86info tools from here:
>> http://www.codemonkey.org.uk/projects/x86info/. However, get either a
>> daily snapshot or a checkout from the git repository and build it on
>> your system. Then do
>>
>> x86info -a > x86info.txt
>>
>> lsmsr -V3 -a > lsmsr.txt
>>
>> and send me those text files - we might be able to get a clue what's going on
>> from them.
Ok, attached is the bootlog.txt, x86info.txt, and lsmsr.txt
Thanks
Mark
[-- Attachment #2: bootlog.txt --]
[-- Type: text/plain, Size: 43308 bytes --]
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Fri Feb 9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 375a8000 - 37fef479
Allocated new RAMDISK: 004a7000 - 00eee479
Move RAMDISK from 00000000375a8000 - 0000000037fef478 to 004a7000 - 00eee478
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 0044 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: HPET BFFE8E40, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE8E80, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000eee479] NEW RAMDISK ==> [00004a7000 - 0000eee479]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normal
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3360.372 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3104320k/3145600k available (1835k kernel code, 39920k reserved, 1095k data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf27 - 0xc03dcc4c (1095 kB)
.text : 0xc0100000 - 0xc02caf27 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6720.74 BogoMIPS (lpj=13441488)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1312574
... PM timer delta = 357950
... PM timer result ok
..... delta 1312574
..... mult: 56371100
..... calibration result: 840047
..... CPU clock speed is 3360.0779 MHz.
..... host bus clock speed is 210.0047 MHz.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 6720.40 BogoMIPS (lpj=13440808)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
masked ExtINT on CPU#2
Calibrating delay using timer specific routine.. 6720.39 BogoMIPS (lpj=13440799)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
masked ExtINT on CPU#3
Calibrating delay using timer specific routine.. 6720.41 BogoMIPS (lpj=13440821)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (26881.95 BogoMIPS).
net_namespace: 776 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:14.4: transparent bridge
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
... APIC ID: 00000000 (0)
... APIC VERSION: 80050010
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ID: 01000000 (1)
... APIC VERSION: 80050010
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ID: 02000000 (2)
... APIC VERSION: 80050010
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000001000
... APIC ID: 03000000 (3)
... APIC VERSION: 80050010
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000001000
testing the IO APIC.......................
.................................... done.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0d: mem resource (0xf0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x1fffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x100000-0xbffdffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: ioport range 0x4100-0x411f has been reserved
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd0-0xcd1 has been reserved
system 00:01: ioport range 0xcd2-0xcd3 has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:01: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x220-0x225 has been reserved
system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved
system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0xd000-0xdfff
pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff
pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: 0xc000-0xcfff
pci 0000:00:04.0: MEM window: 0xfdb00000-0xfdbfffff
pci 0000:00:04.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
pci 0000:00:06.0: IO window: 0xb000-0xbfff
pci 0000:00:06.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:06.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: 0xe000-0xefff
pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:07.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xfd900000-0xfd9fffff
pci 0000:00:14.4: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
bus: 01 index 2 mmio: [0xc0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xc000-0xcfff]
bus: 02 index 1 mmio: [0xfdb00000-0xfdbfffff]
bus: 02 index 2 mmio: [0xfda00000-0xfdafffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xb000-0xbfff]
bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff]
bus: 03 index 2 mmio: [0xfde00000-0xfdefffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0xe000-0xefff]
bus: 04 index 1 mmio: [0xfdd00000-0xfddfffff]
bus: 04 index 2 mmio: [0xfdc00000-0xfdcfffff]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 io port: [0xa000-0xafff]
bus: 05 index 1 mmio: [0xfd900000-0xfd9fffff]
bus: 05 index 2 mmio: [0xfd800000-0xfd8fffff]
bus: 05 index 3 io port: [0x00-0xffff]
bus: 05 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 10525k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1233922326.136:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1717
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport-driver 0000:00:02.0: found MSI capability
pcieport-driver 0000:00:04.0: found MSI capability
pcieport-driver 0000:00:06.0: found MSI capability
pcieport-driver 0000:00:07.0: found MSI capability
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 276k freed
doing fast boot
Boot logging started on /dev/ttSCSI subsystem initialized
yS0(/dev/consolepata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
) at Fri Feb 6 pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
12:12:07 2009
scsi0 : pata_jmicron
scsi1 : pata_jmicron
FATAL: Module prata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
ocessor not found.
FATAL: Module thermal not found.
logips2pp: Detected unknown logitech mouse model 11
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata5: failed due to HW bug, retry pmp=0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907
hda: ST3120023A, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hda: UDMA/100 mode selected
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
aic7xxx 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
FATAL: Module fan not found.
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
sky2 driver version 1.22
sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 5
sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
sky2 eth0: addr 00:e0:4d:7a:8c:ee
Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Creating device nodes with udev
Driver 'sd' needs updating - please use bus_type methods
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ohci_hcd 0000:00:13.0: OHCI Host Controller
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
usb 1-1: new full speed USB device using ohci_hcd and address 2
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28.3-250Hz ehci_hcd
usb usb2: SerialNumber: 0000:00:13.5
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
hub 1-0:1.0: unable to enumerate USB device on port 1
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=03f0, idProduct=5111
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Photosmart 3200 series
usb 2-1: Manufacturer: HP
usb 2-1: SerialNumber: MY5B98310Z045K
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb usb4: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-2: New USB device found, idVendor=0424, idProduct=2504
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
Waiting for device /dev/sda5 to appear: ok
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
fsck 1.40.8 (13-Mar-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda5
/dev/sda5: Superblock last write time is in the future. FIXED.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda5: clean, 340719/3280320 files, 4444849/6554512 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda5
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Mounting debugfs at /sys/kernel/debug done
Initializing /dev done
Mounting devpts at /dev/pts done
done
Starting udevd: sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ide-cd driver 5.00
ide-cd: hdb: ATAPI 32X DVD-ROM DVD-R CD-R/RW<6>Linux agpgart interface v0.103
drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdb:
Error: Illegal request -- (Sense key=0x05)
Logical block address out of range -- (asc=0x21, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdb, sector 0
Buffer I/O error on device hdb, logical block 0
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdb:
Error: Illegal request -- (Sense key=0x05)
Logical block address out of range -- (asc=0x21, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdb, sector 0
Buffer I/O error on device hdb, logical block 0
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
usbcore: registered new interface driver usblp
0000:02:00.0: eth1: MAC: 1, PHY: 4, PBA No: d50854-003
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
ppdev: user-space parallel port driver
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
done
Loading required kernel modules done
Activating swap-devices in /etc/fstabAdding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
... done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
mount: according to mtab, /dev/sda5 is already mounted on /
Setting up the hardware clock done
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Activating device mapper...
done
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 131/131616 files, 88873/263056 blocks
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sda6
/dev/sda6: clean, 84117/5903072 files, 2654384/11797726 blocks
[/sbin/fsck.ext3 (1) -- /local] fsck.ext3 -a /dev/sda7
/dev/sda7: clean, 364115/8536064 files, 10489587/17040940 blocks
[/sbin/fsck.ext3 (1) -- /usr/local] fsck.ext3 -a /dev/sda8
/dev/sda8: clean, 10011/656000 files, 560507/1311297 blocks
[/sbin/fsck.ext3 (1) -- /usr/src] fsck.ext3 -a /dev/sda9
/dev/sda9: clean, 1203258/6557152 files, 11314704/13109032 blocks
[/sbin/fsck.ext3 (1) -- /misc] fsck.ext3 -a /dev/sda10
/dev/sda10: clean, 13/12992512 files, 455787/25967056 blocks
[/sbin/fsck.ext3 (1) -- /lcrs] fsck.ext3 -a /dev/hda1
/dev/hda1: clean, 32325/14663680 files, 24187969/29302552 blocks
[/sbin/fsck.ext3 (1) -- /compro] fsck.ext3 -a /dev/sdc1
/dev/sdc1: clean, 1261027/39075840 files, 12160814/78142160 blocks done
oop: module loaded
5h done
Mokjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
unting local file systems...
proc on /proc typekjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernekjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
l/debug type debugfs (rw)
udev on /dev type tmpkjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fs (rw)
devpts on /dev/pts type devpts (rw,modekjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
=0620,gid=5)
/dev/sda1 on /boot type ext3 (rw,acl,user_xattr)
/dev/sda6 on /hokjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
me type ext3 (rw,acl,user_xattr)kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda7 on /local type ext3 (rw,acl,user_xatkjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tr)
/dev/sda8 on /usr/local type ext3 (rw,acl,user_xattr)
/dev/sda9 on /usr/src type ext3 (rw,acl,user_xattr)
/dev/sda10 on /misc type ext3 (rw,acl,user_xattr)
/dev/hda1 on /lcrs type ext3 (rw)
/dev/sdc1 on /compro type ext3 (rw,acl,user_xattr) done
Retry device configuration: done
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports done
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
fuse init (API version 7.10)
Loading fuse module done
Mounting fuse control filesystem done
scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: [sdd] Attached SCSI removable disk
Mounting securitsd 9:0:0:0: Attached scsi generic sg3 type 0
yfs on /sys/kernel/security done
ls: cannot access /sys/module/apparmor: No such file or directory
ls: cannot access /sys/module/apparmor: No such file or directory
Loading AppArmor module failed
Enabling syn flood protection done
Disabling IP forwarding done
done
Creating /var/log/boot.msg done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Activating remaining swap-devices in /etc/fstab... done
Setting up hostname 'harley' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
System Boot Control: The system has been set up
Failed features: boot.apparmor
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
kernel.shmmax = 81943040 done
INIT: Entering runlevel: 5
Boot logging started on /dev/ttyS0(/dev/console) at Fri Feb 6 12:12:43 2009
Master Resource Control: previous runlevel: N, switching to runlevel: 5
Starting resource manager done
acpid: starting up
Starting acpid done
acpid: 1 rule loaded
Starting D-Bus daemonStarting syslog services done
Initializing random number generator done
done
Starting ConsoleKit done
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Loading CPUFreq modules (CPUFreqip6_tables: (C) 2000-2006 Netfilter Core Team
not supported)
Starting HAL daemonip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Starting Firewall Initialization (phase 1 of 2) done
cdrom: This disc doesn't have any tracks I recognize!
done
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8 done
eth0 device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 13)
eth0 IP address: 10.10.10.100/24 done
eth1 device: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
eth1 IP address: 192.168.10.100/24 done
Waiting for mandatory devices: eth2 eth3 __NSC__
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
eth2 No interface found failed
eth3 No interface found failed
Setting up service network . . . . . . . . . . . . . . failed
Starting service kdm done
Mount CIFS File Systems unused
Starting RPC portmap daemon done
VMware Server is installed, but it has not been (correctly) configured
for the running kernel. To (re-)configure it, invoke the
following command: /usr/bin/vmware-config.pl.
Starting auditd done
Starting cupsd done
Starting SSH daemon done
Starting Avahi daemon. done
Starting Avahi DNS Configuration daemon done
Loading keymap i386/qwerty/us.map.gz done
Loading compose table latin1.add done
Start Unicode mode done
Loading console font lat9w-16.psfu -m trivial G0:loadable done
ntpd: time set -0.245441s
Starting network time protocol daemon (NTPD) done
Starting Name Service Cache Daemon done
Starting mail service (Postfix) done
Starting CRON daemon done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
done
done
[-- Attachment #3: x86info.txt --]
[-- Type: text/plain, Size: 28949 bytes --]
x86info v1.23. Dave Jones 2001-2009
Feedback to <davej@redhat.com>.
Found 4 CPUs
MP Table:
# APIC ID Version State Family Model Step Flags
# 0 0x11 BSP, usable 6 8 6 0xfbff
# 1 0x11 AP, usable 6 8 6 0xfbff
# 2 0x11 AP, usable 6 8 6 0xfbff
# 3 0x11 AP, usable 6 8 6 0xfbff
--------------------------------------------------------------------------
CPU #1
EFamily: 1 EModel: 0 Family: 15 Model: 4 Stepping: 2
CPU Model: Quad-Core Opteron (RB-C2)
Processor name string: AMD Phenom(tm) II X4 940 Processor
Number of reporting banks : 6
MCG_CTL:
Data cache check disabled
Instruction cache check disabled
Bus unit check disabled
Load/Store unit check disabled
31 23 15 7
Bank: 0 (0x400)
MC0CTL: 00000000 00000000 00000000 10000000
MC0STATUS: 00000000 00000000 00000000 00000000
MC0ADDR: 10110000 01100000 10001000 00000000
MC0MISC: 00000000 00000000 00000000 00000000
Bank: 1 (0x404)
MC1CTL: 00000000 00000000 00000000 00000000
MC1STATUS: 00000000 00000000 00000000 00000000
MC1ADDR: 10010111 01111100 10001100 10111111
MC1MISC: 00000000 00000000 00000000 00000000
Bank: 2 (0x408)
MC2CTL: 00000000 00000000 00000000 00000000
MC2STATUS: 00000000 00000000 00000000 00000000
MC2ADDR: 01011000 00001100 00101001 11100001
MC2MISC: 00000000 00000000 00000000 00000000
Bank: 3 (0x40c)
MC3CTL: 00000000 00000000 00000000 00000000
MC3STATUS: 00000000 00000000 00000000 00000000
MC3ADDR: 00110001 11110111 00100000 10010100
MC3MISC: 00000000 00000000 00000000 00000000
Bank: 4 (0x410)
MC4CTL: 00000000 10000000 00000001 00000010
MC4STATUS: 00000000 00000000 00000000 10000010
MC4ADDR: 11111111 11111000 00000001 11110000
MC4MISC: 00000001 00000000 00000000 00000000
Bank: 5 (0x414)
MC5CTL: 00000000 00000000 00000000 00000000
MC5STATUS: 00000000 00000000 00000000 00000000
MC5ADDR: 00000001 00000000 00001010 00010011
MC5MISC: 00000000 00000000 00001100 11001101
PowerNOW! Technology information
Available features:
Temperature sensing diode present.
Thermal Trip
Thermal Monitoring
Software Thermal Control
100MHz multiplier control
Hardware P-state control
invariant TSC
Something went wrong reading MSR_PSTATE_CUR_LIMIT
Monitor/Mwait: min/max line size 64/64, ecx bit 0 support, enumeration extension
SVM: revision 1, 64 ASIDs, np, lbrVirt, SVMLock, NRIPSave
Address Size: 48 bits virtual, 48 bits physical
The physical package has 4 of 4 possible cores implemented.
eax in: 0x00000000, eax = 00000005 ebx = 68747541 ecx = 444d4163 edx = 69746e65
eax in: 0x00000001, eax = 00100f42 ebx = 00040800 ecx = 00802009 edx = 178bfbff
eax in: 0x00000002, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000003, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000004, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000005, eax = 00000040 ebx = 00000040 ecx = 00000003 edx = 00000000
eax in: 0x80000000, eax = 8000001b ebx = 68747541 ecx = 444d4163 edx = 69746e65
eax in: 0x80000001, eax = 00100f42 ebx = 10001a86 ecx = 000037ff edx = efd3fbff
eax in: 0x80000002, eax = 20444d41 ebx = 6e656850 ecx = 74286d6f edx = 4920296d
eax in: 0x80000003, eax = 34582049 ebx = 30343920 ecx = 6f725020 edx = 73736563
eax in: 0x80000004, eax = 0000726f ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000005, eax = ff30ff10 ebx = ff30ff20 ecx = 40020140 edx = 40020140
eax in: 0x80000006, eax = 20800000 ebx = 42004200 ecx = 02008140 edx = 0030b140
eax in: 0x80000007, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 000001f9
eax in: 0x80000008, eax = 00003030 ebx = 00000000 ecx = 00002003 edx = 00000000
eax in: 0x80000009, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000a, eax = 00000001 ebx = 00000040 ecx = 00000000 edx = 0000000f
eax in: 0x8000000b, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000c, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000d, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000e, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000f, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000010, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000011, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000012, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000013, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000014, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000015, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000016, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000017, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000018, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000019, eax = f0300000 ebx = 60100000 ecx = 00000000 edx = 00000000
eax in: 0x8000001a, eax = 00000003 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000001b, eax = 0000001f ebx = 00000000 ecx = 00000000 edx = 00000000
L1 Data TLB (2M/4M): Fully associative. 48 entries.
L1 Instruction TLB (2M/4M): Fully associative. 16 entries.
L1 Data TLB (4K): Fully associative. 48 entries.
L1 Instruction TLB (4K): Fully associative. 32 entries.
L1 Data cache:
Size: 64Kb 2-way associative.
lines per tag=1 line size=64 bytes.
L1 Instruction cache:
Size: 64Kb 2-way associative.
lines per tag=1 line size=64 bytes.
L2 Data TLB (2M/4M): 2-way associative. 128 entries.
L2 Instruction TLB (2M/4M): Disabled. 0 entries.
L2 Data TLB (4K): 4-way associative. 512 entries.
L2 Instruction TLB (4K): 4-way associative. 512 entries.
L2 cache:
Size: 512Kb 16-way associative.
lines per tag=1 line size=64 bytes.
L3 (shared) cache:
Size: 6144Kb 48-way associative.
lines per tag=1 line size=64 bytes.
Feature flags:
fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflsh mmx fxsr sse sse2 ht sse3 mwait cmpxchg16b popcnt
Extended feature flags:
Connector type: Socket AM2r2
MTRR registers:
MTRRcap (0xfe): 0x0000000000000508
MTRRphysBase0 (0x200): 0x0000000000000006
MTRRphysMask0 (0x201): 0x0000ffff80000800
MTRRphysBase1 (0x202): 0x0000000080000006
MTRRphysMask1 (0x203): 0x0000ffffc0000800
MTRRphysBase2 (0x204): 0x0000000100000006
MTRRphysMask2 (0x205): 0x0000ffffc0000800
MTRRphysBase3 (0x206): 0x0000000000000000
MTRRphysMask3 (0x207): 0x0000000000000000
MTRRphysBase4 (0x208): 0x0000000000000000
MTRRphysMask4 (0x209): 0x0000000000000000
MTRRphysBase5 (0x20a): 0x0000000000000000
MTRRphysMask5 (0x20b): 0x0000000000000000
MTRRphysBase6 (0x20c): 0x0000000000000000
MTRRphysMask6 (0x20d): 0x0000000000000000
MTRRphysBase7 (0x20e): 0x0000000000000000
MTRRphysMask7 (0x20f): 0x0000000000000000
MTRRfix64K_00000 (0x250): 0x0606060606060606
MTRRfix16K_80000 (0x258): 0x0606060606060606
MTRRfix16K_A0000 (0x259): 0x0000000000000000
MTRRfix4K_C8000 (0x269): 0x0000000000000000
MTRRfix4K_D0000 0x26a: 0x0000000000000000
MTRRfix4K_D8000 0x26b: 0x0000000000000000
MTRRfix4K_E0000 0x26c: 0x0000000000000000
MTRRfix4K_E8000 0x26d: 0x0000000000000000
MTRRfix4K_F0000 0x26e: 0x0000000000000000
MTRRfix4K_F8000 0x26f: 0x0000000000000000
MTRRdefType (0x2ff): 0x0000000000000c00
4154503.75GHz processor (estimate).
--------------------------------------------------------------------------
CPU #2
EFamily: 1 EModel: 0 Family: 15 Model: 4 Stepping: 2
CPU Model: Quad-Core Opteron (RB-C2)
Processor name string: AMD Phenom(tm) II X4 940 Processor
Number of reporting banks : 6
MCG_CTL:
Data cache check disabled
Instruction cache check disabled
Bus unit check disabled
Load/Store unit check disabled
31 23 15 7
Bank: 0 (0x400)
MC0CTL: 00000000 00000000 00000000 11111111
MC0STATUS: 00000000 00000000 00000000 00000000
MC0ADDR: 10111111 11111001 01001000 10100011
MC0MISC: 00000000 00000000 00000000 00000000
Bank: 1 (0x404)
MC1CTL: 00000000 00000000 00000000 00000000
MC1STATUS: 00000000 00000000 00000000 00000000
MC1ADDR: 00100011 10011110 10000000 00001100
MC1MISC: 00000000 00000000 00000000 00000000
Bank: 2 (0x408)
MC2CTL: 00000000 00000000 00000000 00000000
MC2STATUS: 00000000 00000000 00000000 00000000
MC2ADDR: 11111100 00100010 10000110 01000000
MC2MISC: 00000000 00000000 00000000 00000000
Bank: 3 (0x40c)
MC3CTL: 00000000 00000000 00000000 00000000
MC3STATUS: 00000000 00000000 00000000 00000000
MC3ADDR: 01010011 01110111 11101111 11001111
MC3MISC: 00000000 00000000 00000000 00000000
Bank: 4 (0x410)
MC4CTL: 00000000 00000000 00000000 00000000
MC4STATUS: 00000000 00000000 00000000 00000000
MC4ADDR: 00000000 00000000 00000000 00000000
MC4MISC: 00000001 00000000 00000000 00000000
Bank: 5 (0x414)
MC5CTL: 00000000 00000000 00000000 00000000
MC5STATUS: 00000000 00000000 00000000 00000000
MC5ADDR: 10111011 11001110 10011111 10111000
MC5MISC: 00000000 00000000 00000010 01111111
PowerNOW! Technology information
Available features:
Temperature sensing diode present.
Thermal Trip
Thermal Monitoring
Software Thermal Control
100MHz multiplier control
Hardware P-state control
invariant TSC
Something went wrong reading MSR_PSTATE_CUR_LIMIT
Monitor/Mwait: min/max line size 64/64, ecx bit 0 support, enumeration extension
SVM: revision 1, 64 ASIDs, np, lbrVirt, SVMLock, NRIPSave
Address Size: 48 bits virtual, 48 bits physical
The physical package has 4 of 4 possible cores implemented.
eax in: 0x00000000, eax = 00000005 ebx = 68747541 ecx = 444d4163 edx = 69746e65
eax in: 0x00000001, eax = 00100f42 ebx = 01040800 ecx = 00802009 edx = 178bfbff
eax in: 0x00000002, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000003, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000004, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000005, eax = 00000040 ebx = 00000040 ecx = 00000003 edx = 00000000
eax in: 0x80000000, eax = 8000001b ebx = 68747541 ecx = 444d4163 edx = 69746e65
eax in: 0x80000001, eax = 00100f42 ebx = 10001a86 ecx = 000037ff edx = efd3fbff
eax in: 0x80000002, eax = 20444d41 ebx = 6e656850 ecx = 74286d6f edx = 4920296d
eax in: 0x80000003, eax = 34582049 ebx = 30343920 ecx = 6f725020 edx = 73736563
eax in: 0x80000004, eax = 0000726f ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000005, eax = ff30ff10 ebx = ff30ff20 ecx = 40020140 edx = 40020140
eax in: 0x80000006, eax = 20800000 ebx = 42004200 ecx = 02008140 edx = 0030b140
eax in: 0x80000007, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 000001f9
eax in: 0x80000008, eax = 00003030 ebx = 00000000 ecx = 00002003 edx = 00000000
eax in: 0x80000009, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000a, eax = 00000001 ebx = 00000040 ecx = 00000000 edx = 0000000f
eax in: 0x8000000b, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000c, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000d, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000e, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000f, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000010, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000011, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000012, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000013, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000014, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000015, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000016, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000017, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000018, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000019, eax = f0300000 ebx = 60100000 ecx = 00000000 edx = 00000000
eax in: 0x8000001a, eax = 00000003 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000001b, eax = 0000001f ebx = 00000000 ecx = 00000000 edx = 00000000
L1 Data TLB (2M/4M): Fully associative. 48 entries.
L1 Instruction TLB (2M/4M): Fully associative. 16 entries.
L1 Data TLB (4K): Fully associative. 48 entries.
L1 Instruction TLB (4K): Fully associative. 32 entries.
L1 Data cache:
Size: 64Kb 2-way associative.
lines per tag=1 line size=64 bytes.
L1 Instruction cache:
Size: 64Kb 2-way associative.
lines per tag=1 line size=64 bytes.
L2 Data TLB (2M/4M): 2-way associative. 128 entries.
L2 Instruction TLB (2M/4M): Disabled. 0 entries.
L2 Data TLB (4K): 4-way associative. 512 entries.
L2 Instruction TLB (4K): 4-way associative. 512 entries.
L2 cache:
Size: 512Kb 16-way associative.
lines per tag=1 line size=64 bytes.
L3 (shared) cache:
Size: 6144Kb 48-way associative.
lines per tag=1 line size=64 bytes.
Feature flags:
fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflsh mmx fxsr sse sse2 ht sse3 mwait cmpxchg16b popcnt
Extended feature flags:
Connector type: Socket AM2r2
MTRR registers:
MTRRcap (0xfe): 0x0000000000000508
MTRRphysBase0 (0x200): 0x0000000000000006
MTRRphysMask0 (0x201): 0x0000ffff80000800
MTRRphysBase1 (0x202): 0x0000000080000006
MTRRphysMask1 (0x203): 0x0000ffffc0000800
MTRRphysBase2 (0x204): 0x0000000100000006
MTRRphysMask2 (0x205): 0x0000ffffc0000800
MTRRphysBase3 (0x206): 0x0000000000000000
MTRRphysMask3 (0x207): 0x0000000000000000
MTRRphysBase4 (0x208): 0x0000000000000000
MTRRphysMask4 (0x209): 0x0000000000000000
MTRRphysBase5 (0x20a): 0x0000000000000000
MTRRphysMask5 (0x20b): 0x0000000000000000
MTRRphysBase6 (0x20c): 0x0000000000000000
MTRRphysMask6 (0x20d): 0x0000000000000000
MTRRphysBase7 (0x20e): 0x0000000000000000
MTRRphysMask7 (0x20f): 0x0000000000000000
MTRRfix64K_00000 (0x250): 0x0606060606060606
MTRRfix16K_80000 (0x258): 0x0606060606060606
MTRRfix16K_A0000 (0x259): 0x0000000000000000
MTRRfix4K_C8000 (0x269): 0x0000000000000000
MTRRfix4K_D0000 0x26a: 0x0000000000000000
MTRRfix4K_D8000 0x26b: 0x0000000000000000
MTRRfix4K_E0000 0x26c: 0x0000000000000000
MTRRfix4K_E8000 0x26d: 0x0000000000000000
MTRRfix4K_F0000 0x26e: 0x0000000000000000
MTRRfix4K_F8000 0x26f: 0x0000000000000000
MTRRdefType (0x2ff): 0x0000000000000c00
3.40GHz processor (estimate).
--------------------------------------------------------------------------
CPU #3
EFamily: 1 EModel: 0 Family: 15 Model: 4 Stepping: 2
CPU Model: Quad-Core Opteron (RB-C2)
Processor name string: AMD Phenom(tm) II X4 940 Processor
Number of reporting banks : 6
MCG_CTL:
Data cache check disabled
Instruction cache check disabled
Bus unit check disabled
Load/Store unit check disabled
31 23 15 7
Bank: 0 (0x400)
MC0CTL: 00000000 00000000 00000000 11111111
MC0STATUS: 00000000 00000000 00000000 00000000
MC0ADDR: 00010110 10111000 10101010 10100101
MC0MISC: 00000000 00000000 00000000 00000000
Bank: 1 (0x404)
MC1CTL: 00000000 00000000 00000000 00000000
MC1STATUS: 00000000 00000000 00000000 00000000
MC1ADDR: 00001011 10000001 01010000 00000100
MC1MISC: 00000000 00000000 00000000 00000000
Bank: 2 (0x408)
MC2CTL: 00000000 00000000 00000000 00000000
MC2STATUS: 00000000 00000000 00000000 00000000
MC2ADDR: 01001100 00111110 01011001 01010101
MC2MISC: 00000000 00000000 00000000 00000000
Bank: 3 (0x40c)
MC3CTL: 00000000 00000000 00000000 00000000
MC3STATUS: 00000000 00000000 00000000 00000000
MC3ADDR: 11000011 11101101 11000010 11101010
MC3MISC: 00000000 00000000 00000000 00000000
Bank: 4 (0x410)
MC4CTL: 00000000 00000000 00000000 00000000
MC4STATUS: 00000000 00000000 00000000 00000000
MC4ADDR: 00000000 00000000 00000000 00000000
MC4MISC: 00000001 00000000 00000000 00000000
Bank: 5 (0x414)
MC5CTL: 00000000 00000000 00000000 00000000
MC5STATUS: 00000000 00000000 00000000 00000000
MC5ADDR: 11110111 10101010 10010100 01000000
MC5MISC: 00000000 00000000 00000000 11111110
PowerNOW! Technology information
Available features:
Temperature sensing diode present.
Thermal Trip
Thermal Monitoring
Software Thermal Control
100MHz multiplier control
Hardware P-state control
invariant TSC
Something went wrong reading MSR_PSTATE_CUR_LIMIT
Monitor/Mwait: min/max line size 64/64, ecx bit 0 support, enumeration extension
SVM: revision 1, 64 ASIDs, np, lbrVirt, SVMLock, NRIPSave
Address Size: 48 bits virtual, 48 bits physical
The physical package has 4 of 4 possible cores implemented.
eax in: 0x00000000, eax = 00000005 ebx = 68747541 ecx = 444d4163 edx = 69746e65
eax in: 0x00000001, eax = 00100f42 ebx = 03040800 ecx = 00802009 edx = 178bfbff
eax in: 0x00000002, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000003, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000004, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000005, eax = 00000040 ebx = 00000040 ecx = 00000003 edx = 00000000
eax in: 0x80000000, eax = 8000001b ebx = 68747541 ecx = 444d4163 edx = 69746e65
eax in: 0x80000001, eax = 00100f42 ebx = 10001a86 ecx = 000037ff edx = efd3fbff
eax in: 0x80000002, eax = 20444d41 ebx = 6e656850 ecx = 74286d6f edx = 4920296d
eax in: 0x80000003, eax = 34582049 ebx = 30343920 ecx = 6f725020 edx = 73736563
eax in: 0x80000004, eax = 0000726f ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000005, eax = ff30ff10 ebx = ff30ff20 ecx = 40020140 edx = 40020140
eax in: 0x80000006, eax = 20800000 ebx = 42004200 ecx = 02008140 edx = 0030b140
eax in: 0x80000007, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 000001f9
eax in: 0x80000008, eax = 00003030 ebx = 00000000 ecx = 00002003 edx = 00000000
eax in: 0x80000009, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000a, eax = 00000001 ebx = 00000040 ecx = 00000000 edx = 0000000f
eax in: 0x8000000b, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000c, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000d, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000e, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000f, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000010, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000011, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000012, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000013, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000014, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000015, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000016, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000017, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000018, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000019, eax = f0300000 ebx = 60100000 ecx = 00000000 edx = 00000000
eax in: 0x8000001a, eax = 00000003 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000001b, eax = 0000001f ebx = 00000000 ecx = 00000000 edx = 00000000
L1 Data TLB (2M/4M): Fully associative. 48 entries.
L1 Instruction TLB (2M/4M): Fully associative. 16 entries.
L1 Data TLB (4K): Fully associative. 48 entries.
L1 Instruction TLB (4K): Fully associative. 32 entries.
L1 Data cache:
Size: 64Kb 2-way associative.
lines per tag=1 line size=64 bytes.
L1 Instruction cache:
Size: 64Kb 2-way associative.
lines per tag=1 line size=64 bytes.
L2 Data TLB (2M/4M): 2-way associative. 128 entries.
L2 Instruction TLB (2M/4M): Disabled. 0 entries.
L2 Data TLB (4K): 4-way associative. 512 entries.
L2 Instruction TLB (4K): 4-way associative. 512 entries.
L2 cache:
Size: 512Kb 16-way associative.
lines per tag=1 line size=64 bytes.
L3 (shared) cache:
Size: 6144Kb 48-way associative.
lines per tag=1 line size=64 bytes.
Feature flags:
fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflsh mmx fxsr sse sse2 ht sse3 mwait cmpxchg16b popcnt
Extended feature flags:
Connector type: Socket AM2r2
MTRR registers:
MTRRcap (0xfe): 0x0000000000000508
MTRRphysBase0 (0x200): 0x0000000000000006
MTRRphysMask0 (0x201): 0x0000ffff80000800
MTRRphysBase1 (0x202): 0x0000000080000006
MTRRphysMask1 (0x203): 0x0000ffffc0000800
MTRRphysBase2 (0x204): 0x0000000100000006
MTRRphysMask2 (0x205): 0x0000ffffc0000800
MTRRphysBase3 (0x206): 0x0000000000000000
MTRRphysMask3 (0x207): 0x0000000000000000
MTRRphysBase4 (0x208): 0x0000000000000000
MTRRphysMask4 (0x209): 0x0000000000000000
MTRRphysBase5 (0x20a): 0x0000000000000000
MTRRphysMask5 (0x20b): 0x0000000000000000
MTRRphysBase6 (0x20c): 0x0000000000000000
MTRRphysMask6 (0x20d): 0x0000000000000000
MTRRphysBase7 (0x20e): 0x0000000000000000
MTRRphysMask7 (0x20f): 0x0000000000000000
MTRRfix64K_00000 (0x250): 0x0606060606060606
MTRRfix16K_80000 (0x258): 0x0606060606060606
MTRRfix16K_A0000 (0x259): 0x0000000000000000
MTRRfix4K_C8000 (0x269): 0x0000000000000000
MTRRfix4K_D0000 0x26a: 0x0000000000000000
MTRRfix4K_D8000 0x26b: 0x0000000000000000
MTRRfix4K_E0000 0x26c: 0x0000000000000000
MTRRfix4K_E8000 0x26d: 0x0000000000000000
MTRRfix4K_F0000 0x26e: 0x0000000000000000
MTRRfix4K_F8000 0x26f: 0x0000000000000000
MTRRdefType (0x2ff): 0x0000000000000c00
4154503.75GHz processor (estimate).
--------------------------------------------------------------------------
CPU #4
EFamily: 1 EModel: 0 Family: 15 Model: 4 Stepping: 2
CPU Model: Quad-Core Opteron (RB-C2)
Processor name string: AMD Phenom(tm) II X4 940 Processor
Number of reporting banks : 6
MCG_CTL:
Data cache check disabled
Instruction cache check disabled
Bus unit check disabled
Load/Store unit check disabled
31 23 15 7
Bank: 0 (0x400)
MC0CTL: 00000000 00000000 00000000 11111111
MC0STATUS: 00000000 00000000 00000000 00000000
MC0ADDR: 11010111 11111000 10010011 00111000
MC0MISC: 00000000 00000000 00000000 00000000
Bank: 1 (0x404)
MC1CTL: 00000000 00000000 00000000 00000000
MC1STATUS: 00000000 00000000 00000000 00000000
MC1ADDR: 11111111 11111111 11111111 11111111
MC1MISC: 00000000 00000000 00000000 00000000
Bank: 2 (0x408)
MC2CTL: 00000000 00000000 00000000 00000000
MC2STATUS: 00000000 00000000 00000000 00000000
MC2ADDR: 00001001 11001011 01000001 01000000
MC2MISC: 00000000 00000000 00000000 00000000
Bank: 3 (0x40c)
MC3CTL: 00000000 00000000 00000000 00000000
MC3STATUS: 00000000 00000000 00000000 00000000
MC3ADDR: 10101111 11101001 11111110 11111111
MC3MISC: 00000000 00000000 00000000 00000000
Bank: 4 (0x410)
MC4CTL: 00000000 00000000 00000000 00000000
MC4STATUS: 00000000 00000000 00000000 00000000
MC4ADDR: 00000000 00000000 00000000 00000000
MC4MISC: 00000001 00000000 00000000 00000000
Bank: 5 (0x414)
MC5CTL: 00000000 00000000 00000000 00000000
MC5STATUS: 00000000 00000000 00000000 00000000
MC5ADDR: 10010110 11011101 11100110 11100010
MC5MISC: 00000000 00000000 00000101 01110110
PowerNOW! Technology information
Available features:
Temperature sensing diode present.
Thermal Trip
Thermal Monitoring
Software Thermal Control
100MHz multiplier control
Hardware P-state control
invariant TSC
Something went wrong reading MSR_PSTATE_CUR_LIMIT
Monitor/Mwait: min/max line size 64/64, ecx bit 0 support, enumeration extension
SVM: revision 1, 64 ASIDs, np, lbrVirt, SVMLock, NRIPSave
Address Size: 48 bits virtual, 48 bits physical
The physical package has 4 of 4 possible cores implemented.
eax in: 0x00000000, eax = 00000005 ebx = 68747541 ecx = 444d4163 edx = 69746e65
eax in: 0x00000001, eax = 00100f42 ebx = 02040800 ecx = 00802009 edx = 178bfbff
eax in: 0x00000002, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000003, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000004, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000005, eax = 00000040 ebx = 00000040 ecx = 00000003 edx = 00000000
eax in: 0x80000000, eax = 8000001b ebx = 68747541 ecx = 444d4163 edx = 69746e65
eax in: 0x80000001, eax = 00100f42 ebx = 10001a86 ecx = 000037ff edx = efd3fbff
eax in: 0x80000002, eax = 20444d41 ebx = 6e656850 ecx = 74286d6f edx = 4920296d
eax in: 0x80000003, eax = 34582049 ebx = 30343920 ecx = 6f725020 edx = 73736563
eax in: 0x80000004, eax = 0000726f ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000005, eax = ff30ff10 ebx = ff30ff20 ecx = 40020140 edx = 40020140
eax in: 0x80000006, eax = 20800000 ebx = 42004200 ecx = 02008140 edx = 0030b140
eax in: 0x80000007, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 000001f9
eax in: 0x80000008, eax = 00003030 ebx = 00000000 ecx = 00002003 edx = 00000000
eax in: 0x80000009, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000a, eax = 00000001 ebx = 00000040 ecx = 00000000 edx = 0000000f
eax in: 0x8000000b, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000c, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000d, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000e, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000000f, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000010, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000011, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000012, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000013, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000014, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000015, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000016, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000017, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000018, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000019, eax = f0300000 ebx = 60100000 ecx = 00000000 edx = 00000000
eax in: 0x8000001a, eax = 00000003 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x8000001b, eax = 0000001f ebx = 00000000 ecx = 00000000 edx = 00000000
L1 Data TLB (2M/4M): Fully associative. 48 entries.
L1 Instruction TLB (2M/4M): Fully associative. 16 entries.
L1 Data TLB (4K): Fully associative. 48 entries.
L1 Instruction TLB (4K): Fully associative. 32 entries.
L1 Data cache:
Size: 64Kb 2-way associative.
lines per tag=1 line size=64 bytes.
L1 Instruction cache:
Size: 64Kb 2-way associative.
lines per tag=1 line size=64 bytes.
L2 Data TLB (2M/4M): 2-way associative. 128 entries.
L2 Instruction TLB (2M/4M): Disabled. 0 entries.
L2 Data TLB (4K): 4-way associative. 512 entries.
L2 Instruction TLB (4K): 4-way associative. 512 entries.
L2 cache:
Size: 512Kb 16-way associative.
lines per tag=1 line size=64 bytes.
L3 (shared) cache:
Size: 6144Kb 48-way associative.
lines per tag=1 line size=64 bytes.
Feature flags:
fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflsh mmx fxsr sse sse2 ht sse3 mwait cmpxchg16b popcnt
Extended feature flags:
Connector type: Socket AM2r2
MTRR registers:
MTRRcap (0xfe): 0x0000000000000508
MTRRphysBase0 (0x200): 0x0000000000000006
MTRRphysMask0 (0x201): 0x0000ffff80000800
MTRRphysBase1 (0x202): 0x0000000080000006
MTRRphysMask1 (0x203): 0x0000ffffc0000800
MTRRphysBase2 (0x204): 0x0000000100000006
MTRRphysMask2 (0x205): 0x0000ffffc0000800
MTRRphysBase3 (0x206): 0x0000000000000000
MTRRphysMask3 (0x207): 0x0000000000000000
MTRRphysBase4 (0x208): 0x0000000000000000
MTRRphysMask4 (0x209): 0x0000000000000000
MTRRphysBase5 (0x20a): 0x0000000000000000
MTRRphysMask5 (0x20b): 0x0000000000000000
MTRRphysBase6 (0x20c): 0x0000000000000000
MTRRphysMask6 (0x20d): 0x0000000000000000
MTRRphysBase7 (0x20e): 0x0000000000000000
MTRRphysMask7 (0x20f): 0x0000000000000000
MTRRfix64K_00000 (0x250): 0x0606060606060606
MTRRfix16K_80000 (0x258): 0x0606060606060606
MTRRfix16K_A0000 (0x259): 0x0000000000000000
MTRRfix4K_C8000 (0x269): 0x0000000000000000
MTRRfix4K_D0000 0x26a: 0x0000000000000000
MTRRfix4K_D8000 0x26b: 0x0000000000000000
MTRRfix4K_E0000 0x26c: 0x0000000000000000
MTRRfix4K_E8000 0x26d: 0x0000000000000000
MTRRfix4K_F0000 0x26e: 0x0000000000000000
MTRRfix4K_F8000 0x26f: 0x0000000000000000
MTRRdefType (0x2ff): 0x0000000000000c00
4154503.75GHz processor (estimate).
--------------------------------------------------------------------------
[-- Attachment #4: lsmsr.txt --]
[-- Type: text/plain, Size: 16804 bytes --]
LSMCAaddr = 0x0000ba0a31f72094
ADDR=0xba0a31f72094
LSMCAstatus = 0x0000000000000000
ErrorCode=0
ErrorCodeExt=0
UECC=0
CECC=0
SYND=0
PCC=0
ADDRV=0
MISCV=0
EN=0
UC=0
OVER=0
VAL=0
TSC = 0x000001ef841dd91e
TSC=0x1ef841dd91e
APIC_BASE = 0x00000000fee00900
BSC=0x1
ApicEn=0x1
ApicBar=0xfee00
EBL_CR_POWERON = 0x0000000000000000
ClusterID=0
MTRRcap = 0x0000000000000508
MtrrCapVCnt=0x8
MtrrCapFix=0x1
MtrrCapWc=0x1
SYSENTER_CS = 0x0000000000000060
SYSENTER_CS=0x60
SYSENTER_ESP = 0x00000000c2816580
SYSENTER_ESP=0xc2816580
SYSENTER_EIP = 0x00000000c0103868
SYSENTER_EIP=0xc0103868
MCG_CAP = 0x0000000000000106
Count=0x6
MCG_CTL_P=0x1
MCG_STAT = 0x0000000000000000
RIPV=0
EIPV=0
MCIP=0
MCG_CTL = 0x0000000000000000
DCE=0
ICE=0
BUE=0
LSE=0
NBE=0
FRE=0
DBG_CTL_MSR = 0x0000000000000000
LBR=0
BTF=0
PB0=0
PB1=0
PB2=0
PB3=0
BR_FROM = 0xffffc79ce797b9f5
LastBranchFromIP=0xffffc79ce797b9f5
BR_TO = 0x00000000fe9fffef
LastBranchToIP=0xfe9fffef
LastExceptionFromIP = 0x0000000000000000
LastIntFromIP=0
LastExceptionToIP = 0x0000000000000000
LastIntToIP=0
MTRRphysBase0 = 0x0000000000000006
MemType=0x6
PhyBase=0
MTRRphysMask0 = 0x0000ffff80000800
Valid=0x1
PhysMask=0xffff80000
MTRRphysBase1 = 0x0000000080000006
MemType=0x6
PhyBase=0x80000
MTRRphysMask1 = 0x0000ffffc0000800
Valid=0x1
PhysMask=0xffffc0000
MTRRphysBase2 = 0x0000000100000006
MemType=0x6
PhyBase=0x100000
MTRRphysMask2 = 0x0000ffffc0000800
Valid=0x1
PhysMask=0xffffc0000
MTRRphysBase3 = 0x0000000000000000
MemType=0
PhyBase=0
MTRRphysMask3 = 0x0000000000000000
Valid=0
PhysMask=0
MTRRphysBase4 = 0x0000000000000000
MemType=0
PhyBase=0
MTRRphysMask4 = 0x0000000000000000
Valid=0
PhysMask=0
MTRRphysBase5 = 0x0000000000000000
MemType=0
PhyBase=0
MTRRphysMask5 = 0x0000000000000000
Valid=0
PhysMask=0
MTRRphysBase6 = 0x0000000000000000
MemType=0
PhyBase=0
MTRRphysMask6 = 0x0000000000000000
Valid=0
PhysMask=0
MTRRphysBase7 = 0x0000000000000000
MemType=0
PhyBase=0
MTRRphysMask7 = 0x0000000000000000
Valid=0
PhysMask=0
MTRRfix64K_00000 = 0x0606060606060606
0xxxxType=0x6
1xxxxType=0x6
2xxxxType=0x6
3xxxxType=0x6
4xxxxType=0x6
5xxxxType=0x6
6xxxxType=0x6
7xxxxType=0x6
MTRRfix16K_80000 = 0x0606060606060606
80xxxType=0x6
84xxxType=0x6
88xxxType=0x6
8CxxxType=0x6
90xxxType=0x6
94xxxType=0x6
98xxxType=0x6
9CxxxType=0x6
MTRRfix16K_A0000 = 0x0000000000000000
A0xxxType=0
A4xxxType=0
A8xxxType=0
ACxxxType=0
B0xxxType=0
B4xxxType=0
B8xxxType=0
BCxxxType=0
MTRRfix4K_C0000 = 0x0505050505050505
C0xxxType=0x5
C1xxxType=0x5
C2xxxType=0x5
C3xxxType=0x5
C4xxxType=0x5
C5xxxType=0x5
C6xxxType=0x5
C7xxxType=0x5
MTRRfix4K_C8000 = 0x0000000000000000
C8xxxType=0
C9xxxType=0
CAxxxType=0
CBxxxType=0
CCxxxType=0
CDxxxType=0
CExxxType=0
CFxxxType=0
MTRRfix4K_D0000 = 0x0000000000000000
D0xxxType=0
D1xxxType=0
D2xxxType=0
D3xxxType=0
D4xxxType=0
D5xxxType=0
D6xxxType=0
D7xxxType=0
MTRRfix4K_D8000 = 0x0000000000000000
D8xxxType=0
D9xxxType=0
DAxxxType=0
DBxxxType=0
DCxxxType=0
DDxxxType=0
DExxxType=0
DFxxxType=0
MTRRfix4K_E0000 = 0x0000000000000000
E0xxxType=0
E1xxxType=0
E2xxxType=0
E3xxxType=0
E4xxxType=0
E5xxxType=0
E6xxxType=0
E7xxxType=0
MTRRfix4K_E8000 = 0x0000000000000000
E8xxxType=0
E9xxxType=0
EAxxxType=0
EBxxxType=0
ECxxxType=0
EDxxxType=0
EExxxType=0
EFxxxType=0
MTRRfix4K_F0000 = 0x0000000000000000
F0xxxType=0
F1xxxType=0
F2xxxType=0
F3xxxType=0
F4xxxType=0
F5xxxType=0
F6xxxType=0
F7xxxType=0
MTRRfix4K_F8000 = 0x0000000000000000
F8xxxType=0
F9xxxType=0
FAxxxType=0
FBxxxType=0
FCxxxType=0
FDxxxType=0
FExxxType=0
FFxxxType=0
PAT = 0x0007010600070106
PA0MemType=0x6
PA1MemType=0x1
PA2MemType=0x7
PA3MemType=0
PA4MemType=0x6
PA5MemType=0x1
PA6MemType=0x7
PA7MemType=0
MTRRdefType = 0x0000000000000c00
MemType=0
MtrrDefTypeFixEn=0x1
MtrrDefTypeEn=0x1
MC0_CTL = 0x0000000000000080
ECCI=0
ECCM=0
DECC=0
DMTP=0
DSTP=0
L1TP=0
L2TP=0
MC0_STATUS = 0x0000000000000000
ErrorCode=0
ErrorCodeExt=0
Syndrome=0
Scrub=0
UECC=0
CECC=0
Syndrome=0
PCC=0
AddrV=0
MiscV=0
En=0
UC=0
OVER=0
VAL=0
MC0_ADDR = 0x0000ec1fb0608800
ADDR=0xec1fb0608800
MC0_MISC = 0x0000000000000000
MC1_CTL = 0x0000000000000000
ECCI=0
ECCM=0
IDP=0
IMTP=0
ISTP=0
L1TP=0
L2TP=0
RDDE=0
MC1_STATUS = 0x0000000000000000
ErrorCode=0
ErrorCodeExt=0
UECC=0
CECC=0
PCC=0
AddrV=0
MiscV=0
En=0
UC=0
OVER=0
VAL=0
MC1_ADDR = 0xfbf8ad6d977c8cbf
ADDR=0xad6d977c8cbf
MC1_MISC = 0x0000000000000000
MC2_CTL = 0x0000000000000000
SRDE_HP=0
SRDE_TLB=0
SRDE_ALL=0
L2T_PAR=0
L2T_CECC=0
L2T_UECC=0
L2D_PAR=0
L2D_CECC=0
L2D_UECC=0
VB_PAR=0
PDC_PAR=0
MC2_STATUS = 0x0000000000000000
ErrorCode=0
ErrorCodeExt=0
Scrub=0
UECC=0
CECC=0
PCC=0
AddrV=0
MiscV=0
En=0
UC=0
OVER=0
VAL=0
MC2_ADDR = 0x00008bdd580c29e1
ADDR=0x8bdd580c29e1
MC2_MISC = 0x0000000000000000
MC3_CTL = 0x0000000000000000
SRDE_L=0
SRDE_S=0
MC3_STATUS = 0x0000000000000000
ErrorCode=0
ErrorCodeExt=0
UECC=0
CECC=0
PCC=0
AddrV=0
MiscV=0
En=0
UC=0
OVER=0
VAL=0
MC3_ADDR = 0x0000ba0a31f72094
ADDR=0xba0a31f72094
MC3_MISC = 0x0000000000000000
MC4_CTL = 0x0000000000800102
CECCEn=0
UECCEn=0x1
CrcErr0En=0
CrcErr1En=0
CrcErr2En=0
SyncPkt0En=0
SyncPkt1En=0
SyncPkt2En=0
MstrAbrtEn=0x1
TgtAbrtEn=0
GartTblWkEn=0
AtomicRMWEn=0
WDTRptEn=0
DevErrEn=0
L3ArrayCorEn=0
L3ArrayUCEn=0
HtProtEn=0
HtDataEn=0
DramParEn=0
RtryHt0En=0
RtryHt1En=0
RtryHt2En=0
RtryHt3En=0
CrcErr3En=0x1
SyncPkt3En=0
McaUsPwDatErrEn=0
NbArrayParEn=0
TblWlkDatErrEn=0
MC4_STATUS = 0x0000000000000082
ErrorCode=0x82
ErrorCodeExt=0
Syndrome=0
ErrCpu0=0
ErrCpu1=0
ErrCpu2=0
ErrCpu3=0
LDTLink0=0
LDTLink1=0
LDTLink2=0
LDTLink3=0
Scrub=0
SubLink=0
McaStatSubCache=0
UECC=0
CECC=0
Syndrome=0
PCC=0
AddrV=0
MiscV=0
En=0
UC=0
Over=0
Val=0
MC4_ADDR = 0x00000000fff801f0
ErrAddr=0x7ffc00f8
MC4_MISC0 = 0xc000000001000000
BlkPtr=0x1
ErrCnt=0
Ovrflw=0
IntType=0
CntEn=0
LvtOffset=0
Locked=0
CntP=0x1
Valid=0x1
MC5_CTL = 0x0000000000000000
CPUWDT=0
MC5_STATUS = 0x0000000000000000
ErrorCode=0
ErrorCodeExt=0
Syndrome=0
Scrub=0
UECC=0
CECC=0
Syndrome=0
PCC=0
AddrV=0
MiscV=0
En=0
UC=0
OVER=0
VAL=0
MC5_ADDR = 0x0000ad6d01000a13
ADDR=0xad6d01000a13
MC5_MISC = 0x0000000000000ccd
State=0xccd
EFER = 0x0000000000000000
SYSCALL=0
LME=0
LMA=0
NXE=0
SVME=0
LMSLE=0
FFXSE=0
STAR = 0x0000000000000000
Target=0
SysCallSel=0
SysRetSel=0
STAR64 = 0x0000000000000000
LSTAR=0
STARCOMPAT = 0x0000000000000000
CSTAR=0
SYSCALL_FLAG_MASK = 0x0000000000000000
MASK=0
FS_BASE = 0x00000000023ef000
FS_BASE=0x23ef000
GS_BASE = 0x00000000b7eab6c0
GS_BASE=0xb7eab6c0
KernelGSbase = 0x0000000000000000
KernelGSBase=0
TSC_AUX = 0x0000000000000000
TscAux=0
MC4_MISC1 = 0xc000000001000000
BlkPtr=0x1
ErrCnt=0
Ovrflw=0
IntType=0
CntEn=0
LvtOffset=0
Locked=0
CntP=0x1
Valid=0x1
MC4_MISC2 = 0xc000000001000000
BlkPtr=0x1
ErrCnt=0
Ovrflw=0
IntType=0
CntEn=0
LvtOffset=0
Locked=0
CntP=0x1
Valid=0x1
MC4_MISC3 = 0x0000000001000000
BlkPtr=0x1
PERF_CTL0 = 0x00000200d082c243
EventSelect=0x43
UnitMask=0xc2
User=0
OS=0x1
Edge=0
Int=0
En=0
Inv=0x1
CntMask=0xd0
EventSelect=0
GuestOnly=0
HostOnly=0x1
PERF_CTL1 = 0x0000010e030f8d17
EventSelect=0x17
UnitMask=0x8d
User=0x1
OS=0x1
Edge=0x1
Int=0
En=0
Inv=0
CntMask=0x3
EventSelect=0xe
GuestOnly=0x1
HostOnly=0
PERF_CTL2 = 0x000000074307d19e
EventSelect=0x9e
UnitMask=0xd1
User=0x1
OS=0x1
Edge=0x1
Int=0
En=0
Inv=0
CntMask=0x43
EventSelect=0x7
GuestOnly=0
HostOnly=0
PERF_CTL3 = 0x00000201a00f00cb
EventSelect=0xcb
UnitMask=0
User=0x1
OS=0x1
Edge=0x1
Int=0
En=0
Inv=0
CntMask=0xa0
EventSelect=0x1
GuestOnly=0
HostOnly=0x1
PERF_CTR0 = 0x00000a8121b3acb7
CTR=0xa8121b3acb7
PERF_CTR1 = 0x00008e982076597e
CTR=0x8e982076597e
PERF_CTR2 = 0x00009271a6dffefe
CTR=0x9271a6dffefe
PERF_CTR3 = 0x000038ee7bfe7ca9
CTR=0x38ee7bfe7ca9
SYS_CFG = 0x0000000000760600
SetDirtyEnE=0
SetDirtyEnS=0x1
SetDirtyEnO=0x1
ChxToDirtyDis=0
SysUcLockEn=0x1
MtrrFixDramEn=0x1
MtrrFixDramModeEn=0
MtrrVarDramEn=0x1
MtrrTom2En=0x1
Tom2ForceMemTypeWB=0x1
HWCR = 0x0000000001000011
SmmLock=0x1
SlowFence=0
TlbCacheDis=0
INVD_WBINVD=0x1
IgnneEm=0
MonMwaitDis=0
MonMwaitUserEn=0
LimitCpuidStdMaxVal=0
HltXSpCycEn=0
SmiSpCycDis=0
RsmSpCycDis=0
SseDis=0
Wrap32Dis=0
McStatusWrEn=0
IoCfgGpFault=0
MisAlignSseDis=0
ForceUsRdWrSzPrb=0
TscFreqSel=0x1
IORR_BASE0 = 0x0000000000220000
WrMem=0
RdMem=0
PhyBase=0x220
IORR_MASK0 = 0x0000000000000000
Valid=0
PhyMask=0
IORR_BASE1 = 0x0000000000000000
WrMem=0
RdMem=0
PhyBase=0
IORR_MASK1 = 0x0000000000000000
Valid=0
PhyMask=0
TOP_MEM = 0x00000000c0000000
TOM=0x180
TOM2 = 0x0000000140000000
TOM2=0x280
NB_CFG = 0x0040400000000008
DisRefUseFreeBuf=0
DisXdsBypass=0
DisCohLdtCfg=0
DisDatMsk=0
DisUsSysMgtReqToNcHt=0
EnableCf8ExtCfg=0x1
DisOrderRdRsp=0
InitApicIdCpuIdLo=0x1
MCEredirection = 0x0000000000000000
RedirVector=0
RedirVecEn=0
RedirSmiEn=0
ProcessorNameString0 = 0x6e65685020444d41
CpuNameString=0x6e65685020444d41
ProcessorNameString1 = 0x4920296d74286d6f
CpuNameString=0x4920296d74286d6f
ProcessorNameString2 = 0x3034392034582049
CpuNameString=0x3034392034582049
ProcessorNameString3 = 0x737365636f725020
CpuNameString=0x737365636f725020
ProcessorNameString4 = 0x000000000000726f
CpuNameString=0x726f
ProcessorNameString5 = 0x0000000000000000
CpuNameString=0
MC0_CTL_MASK = 0x0000000000000080
ECCI=0
ECCM=0
DECC=0
DMTP=0
DSTP=0
L1TP=0
L2TP=0
MC1_CTL_MASK = 0x0000000000000080
ECCI=0
ECCM=0
IDP=0
IMTP=0
ISTP=0
L1TP=0
L2TP=0
RDDE=0
MC2_CTL_MASK = 0x0000000000000200
SRDE_HP=0
SRDE_TLB=0
SRDE_ALL=0
L2T_PAR=0
L2T_CECC=0
L2T_UECC=0
L2D_PAR=0
L2D_CECC=0
L2D_UECC=0
VB_PAR=0
PDC_PAR=0
MC3_CTL_MASK = 0x0000000000000000
SRDE_L=0
SRDE_S=0
MC4_CTL_MASK = 0x0000000000780000
CECCEn=0
UECCEn=0
CrcErr0En=0
CrcErr1En=0
CrcErr2En=0
SyncPkt0En=0
SyncPkt1En=0
SyncPkt2En=0
MstrAbrtEn=0
TgtAbrtEn=0
GartTblWkEn=0
AtomicRMWEn=0
WDTRptEn=0
DevErrEn=0
L3ArrayCorEn=0
L3ArrayUCEn=0
HtProtEn=0
HtDataEn=0
DramParEn=0
RtryHt0En=0x1
RtryHt1En=0x1
RtryHt2En=0x1
RtryHt3En=0x1
CrcErr3En=0
SyncPkt3En=0
McaUsPwDatErrEn=0
NbArrayParEn=0
TblWlkDatErrEn=0
MC5_CTL_MASK = 0x0000000000000000
CPUWDT=0
SMI_ON_IO_TRAP_0 = 0x0000000000000000
SmiAddr=0
SmiMask=0
ConfigSmi=0
SmiOnWrEn=0
SmiOnRdEn=0
SMI_ON_IO_TRAP_1 = 0x0000000000000000
SmiAddr=0
SmiMask=0
ConfigSmi=0
SmiOnWrEn=0
SmiOnRdEn=0
SMI_ON_IO_TRAP_2 = 0x0000000000000000
SmiAddr=0
SmiMask=0
ConfigSmi=0
SmiOnWrEn=0
SmiOnRdEn=0
SMI_ON_IO_TRAP_3 = 0xe0fffff8800000e8
SmiAddr=0x800000e8
SmiMask=0xfffff8
ConfigSmi=0x1
SmiOnWrEn=0x1
SmiOnRdEn=0x1
SMI_ON_IO_TRAP_CTL_STS = 0x0000000000000080
SmiEn_0=0
SmiEn_1=0
SmiEn_2=0
SmiEn_3=0x1
IoTrapEn=0
IntPendingMessage = 0x0000000000000000
IOMsgAddr=0
IOMsgData=0
IntrPndMsgDis=0
IntrPndMsg=0
IORd=0
SmiOnCmpHalt=0
SmiTriggerIoCycle = 0x0000000000000000
IoPortAddress=0
IoData=0
IoCycleEn=0
IoRd=0
MmioConfigBase = 0x00000000e0000001
Enable=0x1
TrapAccess=0
SegBusRange=0
MmiocCfgBaseAddr=0xe00
PstateCurrentLimit = 0x0000000000000030
CurPstateLimit=0
PstateMaxVal=0x3
PstateControl = 0x0000000000000000
PstateCmd=0
PstateStatus = 0x0000000000000000
CurPstate=0
Pstate0 = 0x8000001a20002010
CpuFid=0x10
CpuDid=0
CpuVid=0x10
NbDid=0
NbVid=0x10
IddValue=0x1a
IddDiv=0
PstateEn=0x1
Pstate1 = 0x800001c330003007
CpuFid=0x7
CpuDid=0
CpuVid=0x18
NbDid=0
NbVid=0x18
IddValue=0xc3
IddDiv=0x1
PstateEn=0x1
Pstate2 = 0x800001b640004002
CpuFid=0x2
CpuDid=0
CpuVid=0x20
NbDid=0
NbVid=0x20
IddValue=0xb6
IddDiv=0x1
PstateEn=0x1
Pstate3 = 0x8000017240004040
CpuFid=0
CpuDid=0x1
CpuVid=0x20
NbDid=0
NbVid=0x20
IddValue=0x72
IddDiv=0x1
PstateEn=0x1
Pstate4 = 0x0000000000000000
CpuFid=0
CpuDid=0
CpuVid=0
NbDid=0
NbVid=0
IddValue=0
IddDiv=0
PstateEn=0
COFVIDcontrol = 0x0000000020002010
CpuFid=0x10
CpuDid=0
CpuVid=0x10
PstateId=0
NbDid=0
NbVid=0x10
COFVIDstatus = 0x0080000320002010
CurCpuFid=0x10
CurCpuDid=0
CurCpuVid=0x10
CurPstate=0
CurNbDid=0
CurNbVid=0x10
StartupPstate=0x3
MaxVid=0
MinVid=0
MaxCpuCof=0
CurPstateLimit=0
MaxNbFid=0
CpuWdTmrCfg = 0x0000000000000000
CpuWdtEn=0
CpuWdtTimeBase=0
CpuWdtCountSel=0
SMM_BASE = 0x00000000000a0000
SMM_BASE=0xa0000
SMMAddr = 0x0000000000000000
TSegBase=0
SMMMask = 0x000000ff00000001
AValid=0x1
TValid=0
AClose=0
TClose=0
AMTypeIoWc=0
TMTypeIoWc=0
AMTypeDram=0
TMTypeDram=0
TSegMask=0x7f8000
VM_CR = 0x0000000000000000
dpd=0
r_init=0
dis_a20m=0
Lock=0
Svme_Disable=0
IGNNE = 0x0000000000000000
IGNNE=0
VM_HSAVE_PA = 0x0000000000000000
VM_HSAVE_PA=0
SMIstatus = 0x0000000000000000
IoTrapSts=0
MceRedirSts=0
SmiOnCmpHaltSts=0
IntPendSmiSts=0
SmiSrcLvtLcy=0
SmiSrcLvtExt=0
SmiSrcThrCntDram=0
SmiSrcThrCntHt=0
SmiSrcThrCntL3=0
SmiSrcOnLineSpare=0
OSVW_ID_Length = 0x0000000000000001
OSVW_ID_Length=0x1
OsvwStatus = 0x0000000000000000
OsvwStatusBits=0
CPUIDFeatures = 0x00802009178bfbff
Features=0x178bfbff
Features=0x802009
CPUIDExtFeatures = 0x000037ffefd3fbff
ExtFeaturesEcx=0xefd3fbff
ExtFeaturesEdx=0x37ff
DC_CFG = 0x0000009c49000000
REQ_CTR=0x3
BU_CFG = 0x0000000010200020
WbEnhWsbDis=0
BU_CFG2 = 0x00040040050000c0
FrcWTMemTypToWPDis=0
CILinesToNbDis=0
Smash1GPages=0
IbsFetchCtl = 0x0000000000000000
IbsFetchMaxCnt=0
IbsFetchCnt=0
IbsFetchLat=0
IbsFetchEn=0
IbsFetchVal=0
IbsFetchComp=0
IbsIcMiss=0
IbsPhyAddrValid=0
IbsL1TlbPgSz=0
IbsL1TlbMiss=0
IbsL2TlbMiss=0
IbsRandEn=0
IbsFetchLinAd = 0xffffa3e65a746cd5
IbsFetchLinAd=0xffffa3e65a746cd5
IbsFetchPhysAd = 0x00007e03d6486cd5
IbsFetchPhysAd=0x7e03d6486cd5
IbsOpCtl = 0x0000000000000000
IbsOpMaxCnt=0
IbsOpEn=0
IbsOpVal=0
IbsOpRip = 0xffffa914180a05af
IbsOpRip=0xffffa914180a05af
IbsOpData = 0x00000008dafaafa3
IbsCompToRetCtr=0xafa3
IbsTagToRetCtr=0xdafa
IbsOpBrnResync=0
IbsOpMispReturn=0
IbsOpReturn=0
IbsOpBrnTaken=0x1
IbsOpBrnMisp=0
IbsOpBrnRet=0
IbsOpData2 = 0x0000000000000000
NbIbsReqSrc=0
NbIbsReqDstProc=0
NbIbsReqCacheHitSt=0
IbsOpData3 = 0x0000000000000000
IbsLdOp=0
IbsStOp=0
IbsDcL1tlbMiss=0
IbsDcL2tlbMiss=0
IbsDcL1tlbHit2M=0
IbsDcL1tlbHit1G=0
IbsDcL2tlbHit2M=0
IbsDcMiss=0
IbsDcMisAcc=0
IbsDcLdBnkCon=0
IbsDcStBnkCon=0
IbsDcStToLdFwd=0
IbsDcStToLdCan=0
IbsDcUcMemAcc=0
IbsDcWcMemAcc=0
IbsDcLockedOp=0
IbsDcMabHit=0
IbsDcLinAddrValid=0
IbsDcPhyAddrValid=0
IbsDcMissLat=0
IbsDcLinAd = 0x0000000000000000
IbsDcLinAd=0
IbsDcPhysAd = 0x0000000000000000
IbsDcPhysAd=0
IbsControl = 0x0000000000000100
LvtOffset=0
LvtOffsetVal=0x1
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-06 17:55 ` Mark Hounschell
@ 2009-02-06 22:20 ` Mark Hounschell
2009-02-09 14:18 ` Borislav Petkov
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-06 22:20 UTC (permalink / raw)
To: markh
Cc: Borislav Petkov, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 1138 bytes --]
Mark Hounschell wrote:
>> Borislav Petkov wrote:
>>> Ok, here are two things you could try:
>>>
>>> Disable CONFIG_HIGH_RES_TIMERS (high resolution timers support in
>>> "Processor type and features"), boot with "apic=debug" and send me the
>>> output. I'd like to see how the lapic timer gets programmed. It would
>>> be better for that exercise to get the latest stable kernel, 2.6.28.3,
>>> imho.
>>>
>>> The other thing you could do is get x86info tools from here:
>>> http://www.codemonkey.org.uk/projects/x86info/. However, get either a
>>> daily snapshot or a checkout from the git repository and build it on
>>> your system. Then do
>>>
>>> x86info -a > x86info.txt
>>>
>>> lsmsr -V3 -a > lsmsr.txt
>>>
>>> and send me those text files - we might be able to get a clue what's going on
>>> from them.
>
> Ok, attached is the bootlog.txt, x86info.txt, and lsmsr.txt
>
> Thanks
> Mark
>
That bootlog was captured from the serial console, but comparing it to the dmesg
I see more info in the dmesg. The extra stuff for "apic=debug" must not be going
to the serial console?? Either way here is the demsg output too.
Regards
Mark
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 102498 bytes --]
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Fri Feb 6 11:48:54 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 377fe000 @ 10000-16000
RAMDISK: 375a8000 - 37fef479
Allocated new RAMDISK: 004a7000 - 00eee479
Move RAMDISK from 00000000375a8000 - 0000000037fef478 to 004a7000 - 00eee478
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 0044 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: HPET BFFE8E40, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE8E80, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000eee479] NEW RAMDISK ==> [00004a7000 - 0000eee479]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
On node 0 totalpages: 786287
free_area_init_node: node 0, pgdat c03a4900, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 4368 pages used for memmap
HighMem zone: 554706 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normal
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3360.372 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3104320k/3145600k available (1835k kernel code, 39920k reserved, 1095k data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf27 - 0xc03dcc4c (1095 kB)
.text : 0xc0100000 - 0xc02caf27 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6720.74 BogoMIPS (lpj=13441488)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
4-0 (apicid-pin) not connected
IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-9 -> 0x39 -> IRQ 9 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (4-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 (apicid-pin) not connected
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1312574
... PM timer delta = 357950
... PM timer result ok
..... delta 1312574
..... mult: 56371100
..... calibration result: 840047
..... CPU clock speed is 3360.0779 MHz.
..... host bus clock speed is 210.0047 MHz.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 6720.40 BogoMIPS (lpj=13440808)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
masked ExtINT on CPU#2
Calibrating delay using timer specific routine.. 6720.39 BogoMIPS (lpj=13440799)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
masked ExtINT on CPU#3
Calibrating delay using timer specific routine.. 6720.41 BogoMIPS (lpj=13440821)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (26881.95 BogoMIPS).
net_namespace: 776 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07]
pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03]
pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07]
pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03]
pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f]
pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
pci 0000:00:13.3: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
pci 0000:00:13.4: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
pci 0000:00:13.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfdbe0000-0xfdbfffff]
pci 0000:02:00.0: reg 14 32bit mmio: [0xfdbc0000-0xfdbdffff]
pci 0000:02:00.0: reg 18 io port: [0xcf00-0xcf1f]
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:04.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
pci 0000:00:04.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
pci 0000:03:00.0: reg 24 32bit mmio: [0xfdffe000-0xfdffffff]
pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10 io port: [0xbf00-0xbf07]
pci 0000:03:00.1: reg 14 io port: [0xbe00-0xbe03]
pci 0000:03:00.1: reg 18 io port: [0xbd00-0xbd07]
pci 0000:03:00.1: reg 1c io port: [0xbc00-0xbc03]
pci 0000:03:00.1: reg 20 io port: [0xbb00-0xbb0f]
pci 0000:00:06.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:06.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:00:06.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfddfc000-0xfddfffff]
pci 0000:04:00.0: reg 18 io port: [0xee00-0xeeff]
pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:07.0: bridge io port: [0xe000-0xefff]
pci 0000:00:07.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
pci 0000:05:05.0: reg 10 io port: [0xaf00-0xaf3f]
pci 0000:05:05.0: reg 14 32bit mmio: [0xfd9ff000-0xfd9fffff]
pci 0000:05:06.0: reg 10 io port: [0xac00-0xacff]
pci 0000:05:06.0: reg 14 32bit mmio: [0xfd9fe000-0xfd9fefff]
pci 0000:05:06.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:05:07.0: reg 10 io port: [0xae00-0xae3f]
pci 0000:05:07.0: reg 14 32bit mmio: [0xfd9fd000-0xfd9fdfff]
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
pci 0000:00:14.4: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
pci 0000:00:14.4: bridge 32bit mmio pref: [0xfd800000-0xfd8fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
printing PIC contents
... PIC IMR: ffff
... PIC IRR: 0001
... PIC ISR: 0000
... PIC ELCR: 0c28
printing local APIC contents on CPU#0/0:
... APIC ID: 00000000 (0)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 01000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000208fc
... APIC ICR2: 02000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00000400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000cd16
... APIC TMCCT: 0000094a
... APIC TDCR: 00000003
printing local APIC contents on CPU#1/1:
... APIC ID: 01000000 (1)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 02000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000008fc
... APIC ICR2: 01000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000cd16
... APIC TMCCT: 00006b13
... APIC TDCR: 00000003
printing local APIC contents on CPU#2/2:
... APIC ID: 02000000 (2)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000f0 (f0)
... APIC PROCPRI: 00000000
... APIC LDR: 04000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000001000
... APIC ESR: 00000000
... APIC ICR: 000008fc
... APIC ICR2: 02000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000cd16
... APIC TMCCT: 00003d0f
... APIC TDCR: 00000003
printing local APIC contents on CPU#3/3:
... APIC ID: 03000000 (3)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000f0 (f0)
... APIC PROCPRI: 00000000
... APIC LDR: 08000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000001000
... APIC ESR: 00000000
... APIC ICR: 000008fc
... APIC ICR2: 01000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000cd16
... APIC TMCCT: 00000f0b
... APIC TDCR: 00000003
number of MP IRQ sources: 15.
number of IO-APIC #4 registers: 24.
testing the IO APIC.......................
IO APIC #4......
.... register #00: 00000000
....... : physical APIC id: 00
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178021
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0021
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00
01 00F 0 0 0 0 0 1 1 31
02 0FF 0 0 0 0 0 1 1 30
03 00F 0 0 0 0 0 1 1 33
04 00F 0 0 0 0 0 1 1 34
05 00F 0 0 0 0 0 1 1 35
06 00F 0 0 0 0 0 1 1 36
07 00F 1 0 0 0 0 1 1 37
08 00F 0 0 0 0 0 1 1 38
09 00F 0 1 0 1 0 1 1 39
0a 00F 0 0 0 0 0 1 1 3A
0b 00F 0 0 0 0 0 1 1 3B
0c 00F 0 0 0 0 0 1 1 3C
0d 00F 0 0 0 0 0 1 1 3D
0e 00F 0 0 0 0 0 1 1 3E
0f 00F 0 0 0 0 0 1 1 3F
10 000 1 0 0 0 0 0 0 00
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 1 0 0 0 0 0 0 00
15 000 1 0 0 0 0 0 0 00
16 000 1 0 0 0 0 0 0 00
17 000 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
pnp: PnP ACPI init
ACPI: bus type pnp registered
IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
pnp 00:0d: mem resource (0xf0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x1fffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x100000-0xbffdffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: ioport range 0x4100-0x411f has been reserved
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd0-0xcd1 has been reserved
system 00:01: ioport range 0xcd2-0xcd3 has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:01: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x220-0x225 has been reserved
system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved
system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0xd000-0xdfff
pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff
pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: 0xc000-0xcfff
pci 0000:00:04.0: MEM window: 0xfdb00000-0xfdbfffff
pci 0000:00:04.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
pci 0000:00:06.0: IO window: 0xb000-0xbfff
pci 0000:00:06.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:06.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: 0xe000-0xefff
pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:07.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xfd900000-0xfd9fffff
pci 0000:00:14.4: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
IOAPIC[0]: Set routing entry (4-18 -> 0x49 -> IRQ 18 Mode:1 Active:1)
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
IOAPIC[0]: Set routing entry (4-16 -> 0x51 -> IRQ 16 Mode:1 Active:1)
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
IOAPIC[0]: Set routing entry (4-19 -> 0x59 -> IRQ 19 Mode:1 Active:1)
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
bus: 01 index 2 mmio: [0xc0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xc000-0xcfff]
bus: 02 index 1 mmio: [0xfdb00000-0xfdbfffff]
bus: 02 index 2 mmio: [0xfda00000-0xfdafffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xb000-0xbfff]
bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff]
bus: 03 index 2 mmio: [0xfde00000-0xfdefffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0xe000-0xefff]
bus: 04 index 1 mmio: [0xfdd00000-0xfddfffff]
bus: 04 index 2 mmio: [0xfdc00000-0xfdcfffff]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 io port: [0xa000-0xafff]
bus: 05 index 1 mmio: [0xfd900000-0xfd9fffff]
bus: 05 index 2 mmio: [0xfd800000-0xfd8fffff]
bus: 05 index 3 io port: [0x00-0xffff]
bus: 05 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 10525k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1233922326.136:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1717
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pcieport-driver 0000:00:02.0: irq 1279 for MSI/MSI-X
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: found MSI capability
pcieport-driver 0000:00:04.0: irq 1278 for MSI/MSI-X
pci_express 0000:00:04.0:pcie00: allocate port service
pci_express 0000:00:04.0:pcie03: allocate port service
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: found MSI capability
pcieport-driver 0000:00:06.0: irq 1277 for MSI/MSI-X
pci_express 0000:00:06.0:pcie00: allocate port service
pci_express 0000:00:06.0:pcie03: allocate port service
pcieport-driver 0000:00:07.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: found MSI capability
pcieport-driver 0000:00:07.0: irq 1276 for MSI/MSI-X
pci_express 0000:00:07.0:pcie00: allocate port service
pci_express 0000:00:07.0:pcie03: allocate port service
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 276k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
logips2pp: Detected unknown logitech mouse model 11
ahci 0000:00:12.0: version 3.0
IOAPIC[0]: Set routing entry (4-22 -> 0x81 -> IRQ 22 Mode:1 Active:1)
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata5: failed due to HW bug, retry pmp=0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907
Probing IDE interface ide0...
hda: ST3120023A, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
IOAPIC[0]: Set routing entry (4-21 -> 0x89 -> IRQ 21 Mode:1 Active:1)
aic7xxx 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
sky2 driver version 1.22
sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 5
sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
Part Number: Yukon 88E8056
Engineering Level: Rev. 1.3
Manufacturer: Marvell
sky2 0000:04:00.0: irq 1275 for MSI/MSI-X
sky2 eth0: addr 00:e0:4d:7a:8c:ee
Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Driver 'sd' needs updating - please use bus_type methods
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ohci_hcd 0000:00:13.0: OHCI Host Controller
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
usb 1-1: new full speed USB device using ohci_hcd and address 2
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28.3-250Hz ehci_hcd
usb usb2: SerialNumber: 0000:00:13.5
IOAPIC[0]: Set routing entry (4-17 -> 0x99 -> IRQ 17 Mode:1 Active:1)
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
hub 1-0:1.0: unable to enumerate USB device on port 1
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=03f0, idProduct=5111
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Photosmart 3200 series
usb 2-1: Manufacturer: HP
usb 2-1: SerialNumber: MY5B98310Z045K
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb usb4: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-2: New USB device found, idVendor=0424, idProduct=2504
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:02:00.0: setting latency timer to 64
e1000e 0000:02:00.0: irq 1274 for MSI/MSI-X
ide-cd driver 5.00
ide-cd: hdb: ATAPI 32X DVD-ROM DVD-R CD-R/RW<6>Linux agpgart interface v0.103
drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdb:
Error: Illegal request -- (Sense key=0x05)
Logical block address out of range -- (asc=0x21, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdb, sector 0
Buffer I/O error on device hdb, logical block 0
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdb:
Error: Illegal request -- (Sense key=0x05)
Logical block address out of range -- (asc=0x21, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdb, sector 0
Buffer I/O error on device hdb, logical block 0
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
usbcore: registered new interface driver usblp
0000:02:00.0: eth1: MAC: 1, PHY: 4, PBA No: d50854-003
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
ppdev: user-space parallel port driver
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3055: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3059: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3063: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3064: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3072: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.10)
scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: [sdd] Attached SCSI removable disk
sd 9:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
cdrom: This disc doesn't have any tracks I recognize!
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e 0000:02:00.0: irq 1274 for MSI/MSI-X
e1000e 0000:02:00.0: irq 1274 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9305 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9307 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=254 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=234
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=363 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=343
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=363 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=343
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=363 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=343
SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:e0:4d:7a:8c:ee:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=10.10.10.100 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=63488 DF PROTO=TCP SPT=38941 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A006FD8920000000001030304)
SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:e0:4d:7a:8c:ee:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=10.10.10.100 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=46020 DF PROTO=TCP SPT=38942 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A006FDE950000000001030304)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x04 PREC=0x40 TTL=1 ID=9310 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9314 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9328 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9347 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x20 TTL=1 ID=9351 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9370 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9372 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9387 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9391 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9393 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:e0:4d:7a:8c:ee:00:18:f8:ff:72:d3:08:00 SRC=216.54.166.2 DST=10.10.10.100 LEN=60 TOS=0x00 PREC=0x00 TTL=53 ID=22236 DF PROTO=TCP SPT=12276 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A09767D0E0000000001030306)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9409 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x20 TTL=1 ID=9435 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x20 TTL=1 ID=9449 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9453 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9469 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9474 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9487 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9489 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9494 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9497 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9498 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9511 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9515 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9531 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9538 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9550 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9556 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9557 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9573 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9591 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9594 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9598 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9610 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9617 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9619 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9632 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9635 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9656 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9672 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9674 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9677 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9690 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9692 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9696 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9708 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9710 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9726 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9748 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9766 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.10.10.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9801 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9806 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9807 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9809 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9823 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9826 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9831 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9845 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9849 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x20 TTL=1 ID=9864 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9867 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x14 PREC=0xC0 TTL=1 ID=9870 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:04:5a:83:54:1a:08:00 SRC=10.10.10.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:18:f8:ff:72:d3:08:00 SRC=10.10.10.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:15:60:8c:4b:fb:08:00 SRC=10.10.10.105 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9884 OPT (94040000) PROTO=2
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-06 22:20 ` Mark Hounschell
@ 2009-02-09 14:18 ` Borislav Petkov
2009-02-09 15:29 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-02-09 14:18 UTC (permalink / raw)
To: Mark Hounschell
Cc: markh, Andreas Herrmann, john stultz, linux-kernel, Thomas Gleixner
Hi,
On Fri, Feb 06, 2009 at 05:20:08PM -0500, Mark Hounschell wrote:
> Mark Hounschell wrote:
> >> Borislav Petkov wrote:
> >>> Ok, here are two things you could try:
> >>>
> >>> Disable CONFIG_HIGH_RES_TIMERS (high resolution timers support in
> >>> "Processor type and features"), boot with "apic=debug" and send me the
> >>> output. I'd like to see how the lapic timer gets programmed. It would
> >>> be better for that exercise to get the latest stable kernel, 2.6.28.3,
> >>> imho.
> >>>
> >>> The other thing you could do is get x86info tools from here:
> >>> http://www.codemonkey.org.uk/projects/x86info/. However, get either a
> >>> daily snapshot or a checkout from the git repository and build it on
> >>> your system. Then do
> >>>
> >>> x86info -a > x86info.txt
> >>>
> >>> lsmsr -V3 -a > lsmsr.txt
> >>>
> >>> and send me those text files - we might be able to get a clue what's going on
> >>> from them.
> >
> > Ok, attached is the bootlog.txt, x86info.txt, and lsmsr.txt
> >
> > Thanks
> > Mark
> >
>
> That bootlog was captured from the serial console, but comparing it to the dmesg
> I see more info in the dmesg. The extra stuff for "apic=debug" must not be going
> to the serial console?? Either way here is the demsg output too.
>
> Regards
> Mark
>
> BIOS EBDA/lowmem at: 0009f000/0009f000
> Initializing cgroup subsys cpuset
> Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Fri Feb 6 11:48:54 EST 2009
maybe I wasn't clear enough - I meant to boot a _1000HZ_ kernel not a
250HZ one with highres timers disabled, if the line above is correct.
Can you try the same thing as above again, please, but this time use a
1000HZ 32bit kernel.
Thanks.
--
Regards/Gruss,
Boris.
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-09 14:18 ` Borislav Petkov
@ 2009-02-09 15:29 ` Mark Hounschell
2009-02-18 13:11 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-09 15:29 UTC (permalink / raw)
To: Borislav Petkov
Cc: markh, Andreas Herrmann, john stultz, linux-kernel, Thomas Gleixner
Borislav Petkov wrote:
> Hi,
>
> On Fri, Feb 06, 2009 at 05:20:08PM -0500, Mark Hounschell wrote:
>> Mark Hounschell wrote:
>>>> Borislav Petkov wrote:
>>>>> Ok, here are two things you could try:
>>>>>
>>>>> Disable CONFIG_HIGH_RES_TIMERS (high resolution timers support in
>>>>> "Processor type and features"), boot with "apic=debug" and send me the
>>>>> output. I'd like to see how the lapic timer gets programmed. It would
>>>>> be better for that exercise to get the latest stable kernel, 2.6.28.3,
>>>>> imho.
>>>>>
>>>>> The other thing you could do is get x86info tools from here:
>>>>> http://www.codemonkey.org.uk/projects/x86info/. However, get either a
>>>>> daily snapshot or a checkout from the git repository and build it on
>>>>> your system. Then do
>>>>>
>>>>> x86info -a > x86info.txt
>>>>>
>>>>> lsmsr -V3 -a > lsmsr.txt
>>>>>
>>>>> and send me those text files - we might be able to get a clue what's going on
>>>>> from them.
>>> Ok, attached is the bootlog.txt, x86info.txt, and lsmsr.txt
>>>
>>> Thanks
>>> Mark
>>>
>> That bootlog was captured from the serial console, but comparing it to the dmesg
>> I see more info in the dmesg. The extra stuff for "apic=debug" must not be going
>> to the serial console?? Either way here is the demsg output too.
>>
>> Regards
>> Mark
>>
>
>> BIOS EBDA/lowmem at: 0009f000/0009f000
>> Initializing cgroup subsys cpuset
>> Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Fri Feb 6 11:48:54 EST 2009
>
> maybe I wasn't clear enough - I meant to boot a _1000HZ_ kernel not a
> 250HZ one with highres timers disabled, if the line above is correct.
> Can you try the same thing as above again, please, but this time use a
> 1000HZ 32bit kernel.
>
> Thanks.
>
Sorry, hows this?
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #3 SMP PREEMPT Mon Feb9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 375a8000 - 37fef376
Allocated new RAMDISK: 004a7000 - 00eee376
Move RAMDISK from 00000000375a8000 - 0000000037fef375 to 004a7000 - 00eee375
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 0044 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: HPET BFFE8E40, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE8E80, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000eee376] NEW RAMDISK ==> [00004a7000 - 0000eee376]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normal
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3359.811 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3104320k/3145600k available (1835k kernel code, 39920k reserved, 1099k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf57 - 0xc03ddc4c (1099 kB)
.text : 0xc0100000 - 0xc02caf57 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPE
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-09 15:29 ` Mark Hounschell
@ 2009-02-18 13:11 ` Mark Hounschell
2009-02-18 14:18 ` Borislav Petkov
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-18 13:11 UTC (permalink / raw)
To: Mark Hounschell
Cc: Borislav Petkov, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Mark Hounschell wrote:
> Borislav Petkov wrote:
>> maybe I wasn't clear enough - I meant to boot a _1000HZ_ kernel not a
>> 250HZ one with highres timers disabled, if the line above is correct.
>> Can you try the same thing as above again, please, but this time use a
>> 1000HZ 32bit kernel.
>>
>> Thanks.
>>
>
> Sorry, hows this?
> BIOS EBDA/lowmem at: 0009f000/0009f000
> Initializing cgroup subsys cpuset
> Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #3 SMP PREEMPT Mon Feb9
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> NSC Geode by NSC
> Cyrix CyrixInstead
> Centaur CentaurHauls
> Transmeta GenuineTMx86
> Transmeta TransmetaCPU
> UMC UMC UMC UMC
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
> DMI 2.5 present.
> Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
> last_pfn = 0xbffe0 max_arch_pfn = 0x100000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> RAMDISK: 375a8000 - 37fef376
> Allocated new RAMDISK: 004a7000 - 00eee376
> Move RAMDISK from 00000000375a8000 - 0000000037fef375 to 004a7000 - 00eee375
> ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
> ACPI: XSDT BFFE3080, 0044 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
> FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
> ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
> ACPI: FACS BFFE0000, 0040
> ACPI: HPET BFFE8E40, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
> ACPI: MCFG BFFE8E80, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> 2183MB HIGHMEM available.
> 887MB LOWMEM available.
> mapped low ram: 0 - 377fe000
> low ram: 00000000 - 377fe000
> bootmap 00012000 - 00018f00
> (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
> #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
> #3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
> #4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
> #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
> #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
> #7 [00004a7000 - 0000eee376] NEW RAMDISK ==> [00004a7000 - 0000eee376]
> #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
> Scan SMP from c0000000 for 1024 bytes.
> Scan SMP from c009fc00 for 1024 bytes.
> Scan SMP from c00f0000 for 65536 bytes.
> found SMP MP-table at [c00f3f00] 000f3f00
> Zone PFN ranges:
> DMA 0x00000010 -> 0x00001000
> Normal 0x00001000 -> 0x000377fe
> HighMem 0x000377fe -> 0x000bffe0
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0x00000010 -> 0x0000009f
> 0: 0x00000100 -> 0x000bffe0
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> mapped APIC to ffffb000 (fee00000)
> mapped IOAPIC to ffffa000 (fec00000)
> Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
> PERCPU: Allocating 36864 bytes of per cpu data
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
> Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
> noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normal
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> Preemptible RCU implementation.
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Fast TSC calibration using PIT
> Detected 3359.811 MHz processor.
> Console: colour VGA+ 80x25
> console [ttyS0] enabled
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 3104320k/3145600k available (1835k kernel code, 39920k reserved, 1099k
> data, 276k init, 2236296k highmem)
> virtual kernel memory layout:
> fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
> lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
> .init : 0xc03e3000 - 0xc0428000 ( 276 kB)
> .data : 0xc02caf57 - 0xc03ddc4c (1099 kB)
> .text : 0xc0100000 - 0xc02caf57 (1835 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> HPE
>
I guess this didn't help much? Anything else I can do, let me know.
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-18 13:11 ` Mark Hounschell
@ 2009-02-18 14:18 ` Borislav Petkov
2009-02-18 16:57 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-02-18 14:18 UTC (permalink / raw)
To: Mark Hounschell
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
On Wed, Feb 18, 2009 at 08:11:47AM -0500, Mark Hounschell wrote:
> Mark Hounschell wrote:
> > Borislav Petkov wrote:
>
> >> maybe I wasn't clear enough - I meant to boot a _1000HZ_ kernel not a
> >> 250HZ one with highres timers disabled, if the line above is correct.
> >> Can you try the same thing as above again, please, but this time use a
> >> 1000HZ 32bit kernel.
> >>
> >> Thanks.
> >>
> >
> > Checking if this processor honours the WP bit even in supervisor mode...Ok.
> > SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > HPE
Well, not really since we can't know for sure where your machine hangs.
It might be a problem with the HPET but we can't be sure what we see
above is the last string that entered the printk buffer. However, let's
try the following patch (against vanilla 2.6.28.3), please capture the
dmesg again and send it back, thanks.
---
arch/x86/kernel/hpet.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 067d8de..068cbc7 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -269,6 +269,11 @@ static void hpet_set_mode(enum clock_event_mode mode,
cfg = hpet_readl(HPET_Tn_CFG(timer));
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
+
+ printk(KERN_ERR "HPET%d prog. values: now %lu, delta %llu, "
+ "cfg: 0x%lx, \n",
+ timer, now, delta, cfg);
+
hpet_writel(cfg, HPET_Tn_CFG(timer));
/*
* The first write after writing TN_SETVAL to the
--
1.6.0.4
--
Regards/Gruss,
Boris.
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply related [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-18 14:18 ` Borislav Petkov
@ 2009-02-18 16:57 ` Mark Hounschell
2009-02-18 17:42 ` Borislav Petkov
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-18 16:57 UTC (permalink / raw)
To: Borislav Petkov
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Borislav Petkov wrote:
> On Wed, Feb 18, 2009 at 08:11:47AM -0500, Mark Hounschell wrote:
>> Mark Hounschell wrote:
>>> Borislav Petkov wrote:
>>>> maybe I wasn't clear enough - I meant to boot a _1000HZ_ kernel not a
>>>> 250HZ one with highres timers disabled, if the line above is correct.
>>>> Can you try the same thing as above again, please, but this time use a
>>>> 1000HZ 32bit kernel.
>>>>
>>>> Thanks.
>>>>
>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>> HPE
>
> Well, not really since we can't know for sure where your machine hangs.
> It might be a problem with the HPET but we can't be sure what we see
> above is the last string that entered the printk buffer. However, let's
> try the following patch (against vanilla 2.6.28.3), please capture the
> dmesg again and send it back, thanks.
>
>
> ---
> arch/x86/kernel/hpet.c | 5 +++++
> 1 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
> index 067d8de..068cbc7 100644
> --- a/arch/x86/kernel/hpet.c
> +++ b/arch/x86/kernel/hpet.c
> @@ -269,6 +269,11 @@ static void hpet_set_mode(enum clock_event_mode mode,
> cfg = hpet_readl(HPET_Tn_CFG(timer));
> cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
> HPET_TN_SETVAL | HPET_TN_32BIT;
> +
> + printk(KERN_ERR "HPET%d prog. values: now %lu, delta %llu, "
> + "cfg: 0x%lx, \n",
> + timer, now, delta, cfg);
> +
> hpet_writel(cfg, HPET_Tn_CFG(timer));
> /*
> * The first write after writing TN_SETVAL to the
OK, this one looks like it got further than usual or just more messages got out
before the hang for some reason.
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #4 SMP PREEMPT Wed Feb9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 374d0000 - 37feff67
Allocated new RAMDISK: 004a7000 - 00fc6f67
Move RAMDISK from 00000000374d0000 - 0000000037feff66 to 004a7000 - 00fc6f66
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc6f67] NEW RAMDISK ==> [00004a7000 - 0000fc6f67]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=g
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3000.297 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103456k/3145600k available (1835k kernel code, 40784k reserved, 1099k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf97 - 0xc03ddc4c (1099 kB)
.text : 0xc0100000 - 0xc02caf97 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPET0 prog. values: now 20642, delta 14318, cfg: 0x15c,
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency..
6000.59 BogoMIPS (lpj=3000297)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Checking 'hlt' instruction...
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-18 16:57 ` Mark Hounschell
@ 2009-02-18 17:42 ` Borislav Petkov
2009-02-18 21:16 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-02-18 17:42 UTC (permalink / raw)
To: Mark Hounschell
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Hi,
> BIOS EBDA/lowmem at: 0009f000/0009f000
> Initializing cgroup subsys cpuset
> Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #4 SMP PREEMPT Wed Feb9
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> NSC Geode by NSC
> Cyrix CyrixInstead
> Centaur CentaurHauls
> Transmeta GenuineTMx86
> Transmeta TransmetaCPU
> UMC UMC UMC UMC
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
> DMI 2.5 present.
> Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
> last_pfn = 0xbffe0 max_arch_pfn = 0x100000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> RAMDISK: 374d0000 - 37feff67
> Allocated new RAMDISK: 004a7000 - 00fc6f67
> Move RAMDISK from 00000000374d0000 - 0000000037feff66 to 004a7000 - 00fc6f66
> ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
> ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
> FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
> ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
> ACPI: FACS BFFE0000, 0040
> ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
> ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
> ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> 2183MB HIGHMEM available.
> 887MB LOWMEM available.
> mapped low ram: 0 - 377fe000
> low ram: 00000000 - 377fe000
> bootmap 00012000 - 00018f00
> (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
> #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
> #3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
> #4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
> #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
> #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
> #7 [00004a7000 - 0000fc6f67] NEW RAMDISK ==> [00004a7000 - 0000fc6f67]
> #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
> Scan SMP from c0000000 for 1024 bytes.
> Scan SMP from c009fc00 for 1024 bytes.
> Scan SMP from c00f0000 for 65536 bytes.
> found SMP MP-table at [c00f3f00] 000f3f00
> Zone PFN ranges:
> DMA 0x00000010 -> 0x00001000
> Normal 0x00001000 -> 0x000377fe
> HighMem 0x000377fe -> 0x000bffe0
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0x00000010 -> 0x0000009f
> 0: 0x00000100 -> 0x000bffe0
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> mapped APIC to ffffb000 (fee00000)
> mapped IOAPIC to ffffa000 (fec00000)
> Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
> PERCPU: Allocating 36864 bytes of per cpu data
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
> Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
> hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=g
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> Preemptible RCU implementation.
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Fast TSC calibration using PIT
> Detected 3000.297 MHz processor.
> Console: colour VGA+ 80x25
> console [ttyS0] enabled
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 3103456k/3145600k available (1835k kernel code, 40784k reserved, 1099k
> data, 276k init, 2236296k highmem)
> virtual kernel memory layout:
> fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
> lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
> .init : 0xc03e3000 - 0xc0428000 ( 276 kB)
> .data : 0xc02caf97 - 0xc03ddc4c (1099 kB)
> .text : 0xc0100000 - 0xc02caf97 (1835 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> HPET0 prog. values: now 20642, delta 14318, cfg: 0x15c,
> HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> Calibrating delay loop (skipped), value calculated using timer frequency..
> 6000.59 BogoMIPS (lpj=3000297)
> Security Framework initialized
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> using C1E aware idle routine
> Checking 'hlt' instruction...
now if you retry the same thing, does the machine hang with the exact
same output/at the exact same place in the boot process or it differs
each time?
--
Regards/Gruss,
Boris.
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-18 17:42 ` Borislav Petkov
@ 2009-02-18 21:16 ` Mark Hounschell
2009-02-19 10:37 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-18 21:16 UTC (permalink / raw)
To: Borislav Petkov
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Borislav Petkov wrote:
> Hi,
>
>> BIOS EBDA/lowmem at: 0009f000/0009f000
>> Initializing cgroup subsys cpuset
>> Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
>> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #4 SMP PREEMPT Wed Feb9
>> KERNEL supported cpus:
>> Intel GenuineIntel
>> AMD AuthenticAMD
>> NSC Geode by NSC
>> Cyrix CyrixInstead
>> Centaur CentaurHauls
>> Transmeta GenuineTMx86
>> Transmeta TransmetaCPU
>> UMC UMC UMC UMC
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
>> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
>> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
>> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
>> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
>> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>> DMI 2.5 present.
>> Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
>> last_pfn = 0xbffe0 max_arch_pfn = 0x100000
>> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> RAMDISK: 374d0000 - 37feff67
>> Allocated new RAMDISK: 004a7000 - 00fc6f67
>> Move RAMDISK from 00000000374d0000 - 0000000037feff66 to 004a7000 - 00fc6f66
>> ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
>> ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
>> ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
>> FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
>> ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
>> ACPI: FACS BFFE0000, 0040
>> ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
>> ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
>> ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
>> ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
>> 2183MB HIGHMEM available.
>> 887MB LOWMEM available.
>> mapped low ram: 0 - 377fe000
>> low ram: 00000000 - 377fe000
>> bootmap 00012000 - 00018f00
>> (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
>> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
>> #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
>> #3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
>> #4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
>> #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
>> #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
>> #7 [00004a7000 - 0000fc6f67] NEW RAMDISK ==> [00004a7000 - 0000fc6f67]
>> #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
>> Scan SMP from c0000000 for 1024 bytes.
>> Scan SMP from c009fc00 for 1024 bytes.
>> Scan SMP from c00f0000 for 65536 bytes.
>> found SMP MP-table at [c00f3f00] 000f3f00
>> Zone PFN ranges:
>> DMA 0x00000010 -> 0x00001000
>> Normal 0x00001000 -> 0x000377fe
>> HighMem 0x000377fe -> 0x000bffe0
>> Movable zone start PFN for each node
>> early_node_map[2] active PFN ranges
>> 0: 0x00000010 -> 0x0000009f
>> 0: 0x00000100 -> 0x000bffe0
>> ACPI: PM-Timer IO Port: 0x4008
>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> Enabling APIC mode: Flat. Using 1 I/O APICs
>> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>> Using ACPI (MADT) for SMP configuration information
>> SMP: Allowing 4 CPUs, 0 hotplug CPUs
>> mapped APIC to ffffb000 (fee00000)
>> mapped IOAPIC to ffffa000 (fec00000)
>> Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
>> PERCPU: Allocating 36864 bytes of per cpu data
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
>> Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
>> hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=g
>> Enabling fast FPU save and restore... done.
>> Enabling unmasked SIMD FPU exception support... done.
>> Initializing CPU#0
>> Preemptible RCU implementation.
>> PID hash table entries: 4096 (order: 12, 16384 bytes)
>> Fast TSC calibration using PIT
>> Detected 3000.297 MHz processor.
>> Console: colour VGA+ 80x25
>> console [ttyS0] enabled
>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>> Memory: 3103456k/3145600k available (1835k kernel code, 40784k reserved, 1099k
>> data, 276k init, 2236296k highmem)
>> virtual kernel memory layout:
>> fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
>> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
>> vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
>> lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
>> .init : 0xc03e3000 - 0xc0428000 ( 276 kB)
>> .data : 0xc02caf97 - 0xc03ddc4c (1099 kB)
>> .text : 0xc0100000 - 0xc02caf97 (1835 kB)
>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>> HPET0 prog. values: now 20642, delta 14318, cfg: 0x15c,
>> HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>> Calibrating delay loop (skipped), value calculated using timer frequency..
>> 6000.59 BogoMIPS (lpj=3000297)
>> Security Framework initialized
>> Mount-cache hash table entries: 512
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> CPU: Physical Processor ID: 0
>> CPU: Processor Core ID: 0
>> using C1E aware idle routine
>> Checking 'hlt' instruction...
>
> now if you retry the same thing, does the machine hang with the exact
> same output/at the exact same place in the boot process or it differs
> each time?
>
Yes, now it does. I've done it about 5 times. Same...
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-18 21:16 ` Mark Hounschell
@ 2009-02-19 10:37 ` Mark Hounschell
2009-02-19 14:11 ` Andreas Herrmann
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-19 10:37 UTC (permalink / raw)
To: Borislav Petkov
Cc: Mark Hounschell, Andreas Herrmann, john stultz, linux-kernel,
Thomas Gleixner
Mark Hounschell wrote:
> Borislav Petkov wrote:
snip.
>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>> HPET0 prog. values: now 20642, delta 14318, cfg: 0x15c,
>>> HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>>> Calibrating delay loop (skipped), value calculated using timer frequency..
>>> 6000.59 BogoMIPS (lpj=3000297)
>>> Security Framework initialized
>>> Mount-cache hash table entries: 512
>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>> CPU: L2 Cache: 512K (64 bytes/line)
>>> CPU: Physical Processor ID: 0
>>> CPU: Processor Core ID: 0
>>> using C1E aware idle routine
>>> Checking 'hlt' instruction...
>> now if you retry the same thing, does the machine hang with the exact
>> same output/at the exact same place in the boot process or it differs
>> each time?
>>
>
> Yes, now it does. I've done it about 5 times. Same...
>
> Mark
If I make the check_hlt routine just return I get what _appears_ to be what you
need to see.
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #5 SMP PREEMPT Thu Feb9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 374cf000 - 37fef40f
Allocated new RAMDISK: 004a7000 - 00fc740f
Move RAMDISK from 00000000374cf000 - 0000000037fef40e to 004a7000 - 00fc740e
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc740f] NEW RAMDISK ==> [00004a7000 - 0000fc740f]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=g
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 3000.183 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103452k/3145600k available (1835k kernel code, 40788k reserved, 1099k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf97 - 0xc03ddc4c (1099 kB)
.text : 0xc0100000 - 0xc02caf97 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPET0 prog. values: now 1131, delta 14318, cfg: 0x15c,
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency..
6000.36 BogoMIPS (lpj=3000183)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20080926
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... failed.
...trying to set up timer as ExtINT IRQ...
..... failed :(.
Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug
and send a report. Then try booting with the 'noapic' option.
------------[ cut here ]------------
WARNING: at kernel/smp.c:333 smp_call_function_mask+0x2c/0x17d()
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.28.3-1000Hz #5
Call Trace:
[<c011e9cd>] warn_on_slowpath+0x40/0x61
[<c01d6ddd>] delay_tsc+0x6c/0x87
[<c01d6d00>] __const_udelay+0x19/0x2d
[<c0233a77>] wait_for_xmitr+0x33/0x74
[<c01d6ddd>] delay_tsc+0x6c/0x87
[<c01d6d13>] __const_udelay+0x2c/0x2d
[<c0233a77>] wait_for_xmitr+0x33/0x74
[<c02c7304>] _spin_unlock+0xc/0x1f
[<c02c7122>] _spin_lock_irqsave+0x11/0x2a
[<c0131116>] up+0x9/0x2a
[<c010d48e>] stop_this_cpu+0x0/0x30
[<c0139985>] smp_call_function_mask+0x2c/0x17d
[<c010d48e>] stop_this_cpu+0x0/0x30
[<c011f3e2>] vprintk+0x27e/0x2b4
[<c013ead4>] crash_kexec+0xa9/0xb0
[<c011f3e2>] vprintk+0x27e/0x2b4
[<c02c7122>] _spin_lock_irqsave+0x11/0x2a
[<c010d48e>] stop_this_cpu+0x0/0x30
[<c0139af8>] smp_call_function+0x22/0x47
[<c010d482>] native_smp_send_stop+0x18/0x24
[<c02c526d>] panic+0x51/0xdf
[<c03f155d>] setup_IO_APIC+0xac4/0xaf8
[<c01d6ddd>] delay_tsc+0x6c/0x87
[<c0233a00>] serial8250_verify_port+0xb/0x35
[<c02c7304>] _spin_unlock+0xc/0x1f
[<c02c7122>] _spin_lock_irqsave+0x11/0x2a
[<c0131116>] up+0x9/0x2a
[<c02c72a1>] _spin_unlock_irqrestore+0xe/0x21
[<c011ef7c>] release_console_sem+0x16d/0x19a
[<c011f3e2>] vprintk+0x27e/0x2b4
[<c02c6fe4>] _spin_lock+0xd/0x23
[<c02c5309>] printk+0xe/0x15
[<c02c3c65>] setup_local_APIC+0x16e/0x207
[<c010e789>] setup_apic_nmi_watchdog+0x1e/0x81
[<c03ed93a>] native_smp_prepare_cpus+0x3ab/0x441
[<c03e31f0>] kernel_init+0x43/0x144
[<c03e31ad>] kernel_init+0x0/0x144
[<c010464b>] kernel_thread_helper+0x7/0x10
---[ end trace 4eaa2a86a8e2da22 ]---
Here is the same part of the log with a 250Hz kernel that does boot. (without
your little printk patch though)
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Fri
Feb 9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 375a8000 - 37fef479
Allocated new RAMDISK: 004a7000 - 00eee479
Move RAMDISK from 00000000375a8000 - 0000000037fef478 to 004a7000 - 00eee478
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000eee479] NEW RAMDISK ==> [00004a7000 - 0000eee479]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=g
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 3000.243 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3104320k/3145600k available (1835k kernel code, 39920k reserved, 1095k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf27 - 0xc03dcc4c (1095 kB)
.text : 0xc0100000 - 0xc02caf27 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency..
6000.48 BogoMIPS (lpj=12000972)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1250071
... PM timer delta = 357950
... PM timer result ok
..... delta 1250071
..... mult: 53686785
..... calibration result: 800045
..... CPU clock speed is 3000.0687 MHz.
..... host bus clock speed is 200.0045 MHz.
Booting processor 1 APIC 0x1 ip 0x6000
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-19 10:37 ` Mark Hounschell
@ 2009-02-19 14:11 ` Andreas Herrmann
2009-02-19 15:16 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Andreas Herrmann @ 2009-02-19 14:11 UTC (permalink / raw)
To: Mark Hounschell
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
Hi Mark,
Can you please provide us output of lspci -vvxxx.
(Please run this as root.)
Furthermore you can try booting your 1000HZ kernel
with following kernel command lines:
(1) acpi_skip_timer_override apic=debug
(2) nohpet apic=debug
(3) acpi_skip_timer_override nohpet apic=debug
and send us all dmesg output.
Thanks!
Andreas
--
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-19 14:11 ` Andreas Herrmann
@ 2009-02-19 15:16 ` Mark Hounschell
2009-02-19 15:19 ` Borislav Petkov
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-19 15:16 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
Andreas Herrmann wrote:
> Hi Mark,
>
> Can you please provide us output of lspci -vvxxx.
> (Please run this as root.)
>
> Furthermore you can try booting your 1000HZ kernel
> with following kernel command lines:
>
> (1) acpi_skip_timer_override apic=debug
> (2) nohpet apic=debug
> (3) acpi_skip_timer_override nohpet apic=debug
>
> and send us all dmesg output.
>
>
> Thanks!
>
> Andreas
>
Should I leave the leave the immediate return I put in the check_hlt routine or
set it back to normal first?
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-19 15:16 ` Mark Hounschell
@ 2009-02-19 15:19 ` Borislav Petkov
2009-02-19 15:54 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Borislav Petkov @ 2009-02-19 15:19 UTC (permalink / raw)
To: Mark Hounschell
Cc: Andreas Herrmann, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
On Thu, Feb 19, 2009 at 10:16:40AM -0500, Mark Hounschell wrote:
> Andreas Herrmann wrote:
> > Hi Mark,
> >
> > Can you please provide us output of lspci -vvxxx.
> > (Please run this as root.)
> >
> > Furthermore you can try booting your 1000HZ kernel
> > with following kernel command lines:
> >
> > (1) acpi_skip_timer_override apic=debug
> > (2) nohpet apic=debug
> > (3) acpi_skip_timer_override nohpet apic=debug
> >
> > and send us all dmesg output.
> >
> >
> > Thanks!
> >
> > Andreas
> >
>
> Should I leave the leave the immediate return I put in the check_hlt routine or
> set it back to normal first?
Yes, please. Remove all patches/changes you've applied.
--
Regards/Gruss,
Boris.
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-19 15:19 ` Borislav Petkov
@ 2009-02-19 15:54 ` Mark Hounschell
2009-02-20 11:53 ` Andreas Herrmann
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-19 15:54 UTC (permalink / raw)
To: Borislav Petkov
Cc: Andreas Herrmann, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 18214 bytes --]
Borislav Petkov wrote:
> On Thu, Feb 19, 2009 at 10:16:40AM -0500, Mark Hounschell wrote:
>> Andreas Herrmann wrote:
>>> Hi Mark,
>>>
>>> Can you please provide us output of lspci -vvxxx.
>>> (Please run this as root.)
>>>
Attached...
>>> Furthermore you can try booting your 1000HZ kernel
>>> with following kernel command lines:
>>>
>>> (1) acpi_skip_timer_override apic=debug
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #6 SMP PREEMPT Thu Feb9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 374d0000 - 37feff8f
Allocated new RAMDISK: 004a7000 - 00fc6f8f
Move RAMDISK from 00000000374d0000 - 0000000037feff8e to 004a7000 - 00fc6f8e
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc6f8f] NEW RAMDISK ==> [00004a7000 - 0000fc6f8f]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
SB600 revision 0x13
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 apm=off
selinux=0 noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normg
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 3000.246 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103456k/3145600k available (1835k kernel code, 40784k reserved, 1099k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf57 - 0xc03ddc4c (1099 kB)
.text : 0xc0100000 - 0xc02caf57 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPE
>>> (2) nohpet apic=debug
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #6 SMP PREEMPT Thu Feb9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 374d0000 - 37feff8f
Allocated new RAMDISK: 004a7000 - 00fc6f8f
Move RAMDISK from 00000000374d0000 - 0000000037feff8e to 004a7000 - 00fc6f8e
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc6f8f] NEW RAMDISK ==> [00004a7000 - 0000fc6f8f]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 apm=off
selinux=0 noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normg
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 3000.204 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103456k/3145600k available (1835k kernel code, 40784k reserved, 1099k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf57 - 0xc03ddc4c (1099 kB)
.text : 0xc0100000 - 0xc02caf57 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Cal
>>> (3) acpi_skip_timer_override nohpet apic=debug
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #6 SMP PREEMPT Thu Feb9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 374d0000 - 37feff8f
Allocated new RAMDISK: 004a7000 - 00fc6f8f
Move RAMDISK from 00000000374d0000 - 0000000037feff8e to 004a7000 - 00fc6f8e
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc6f8f] NEW RAMDISK ==> [00004a7000 - 0000fc6f8f]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
SB600 revision 0x13
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 apm=off
selinux=0 noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normg
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3000.222 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103456k/3145600k available (1835k kernel code, 40784k reserved, 1099k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf57 - 0xc03ddc4c (1099 kB)
.text : 0xc0100000 - 0xc02caf57 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Cal
It would seem that one small printk you asked me to put in makes a quite a
difference as to what gets printed. If you want me to put that back in and do
this again let me know. I'll be by this box all day today.
I noticed minicom is truncating some of this, like the cmdline. I did use the
cmdline args asked for though.
Mark
[-- Attachment #2: d.lspci.txt --]
[-- Type: text/plain, Size: 54745 bytes --]
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: 1.4GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
Kernel modules: ati-agp
00: 02 10 57 59 06 00 30 22 00 00 00 06 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 57 59
30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00
40: 08 54 00 c0 c1 00 00 00 00 00 00 00 42 20 05 00
50: 02 10 57 59 08 9c 00 90 08 10 00 00 00 00 2c 54
60: 7d 00 00 00 e3 00 00 00 00 02 20 00 61 57 00 78
70: 00 00 00 00 00 00 00 00 32 23 0f 00 00 00 00 00
80: 00 00 00 00 10 00 00 03 20 01 30 00 31 20 00 40
90: 00 00 00 c0 7d 00 00 00 00 00 00 00 08 00 3c d0
a0: 82 00 00 00 00 00 00 05 00 00 00 00 79 40 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 80 08 40 80 01 20 00 11 11 d0 00 00 00
d0: 60 08 f5 7f 02 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 05 00 ff ff ff ff 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 80 80 00 00 00 00 00 00 00 00 00
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41c1
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: 02 10 78 59 07 04 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 d1 d1 00 00
20: 00 f8 f0 fb 01 c0 f1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 08 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00
60: 1f 08 00 00 02 0d 30 00 40 00 01 71 80 25 14 00
70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 05 b0 01 00 0c f0 e0 fe c1 41 00 00 00 00 00 00
b0: 0d b8 00 00 02 10 57 59 08 00 03 a8 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 50 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:04.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41c9
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: 02 10 7a 59 07 04 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 c1 c1 00 00
20: b0 fd b0 fd a1 fd a1 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00
60: 1f 08 00 00 22 0c 30 00 40 00 11 70 80 0c 24 00
70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 05 b0 01 00 0c f0 e0 fe c9 41 00 00 00 00 00 00
b0: 0d b8 00 00 02 10 57 59 08 00 03 a8 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 50 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41d1
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: 02 10 7c 59 07 04 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 b1 b1 00 00
20: f0 fd f0 fd e1 fd e1 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00
60: 1f 08 00 00 12 0c 30 02 40 00 11 70 80 0c 34 00
70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 05 b0 01 00 0c f0 e0 fe d1 41 00 00 00 00 00 00
b0: 0d b8 00 00 02 10 57 59 08 00 03 a8 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 50 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0f00c Data: 41d9
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: 02 10 7d 59 07 04 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00
20: d0 fd d0 fd c1 fd c1 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00
60: 1f 08 00 00 12 0c 30 03 40 00 11 70 80 0c 3c 00
70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 05 b0 01 00 0c f0 e0 fe d9 41 00 00 00 00 00 00
b0: 0d b8 00 00 02 10 57 59 08 00 03 a8 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 50 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Subsystem: ATI Technologies Inc SB600 Non-Raid-5 SATA
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
Kernel modules: ahci
00: 02 10 80 43 07 00 30 02 00 01 06 01 00 40 00 00
10: 01 ff 00 00 01 fe 00 00 01 fd 00 00 01 fc 00 00
20: 01 fb 00 00 00 f0 02 fe 00 00 00 00 02 10 80 43
30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
40: 10 00 80 02 01 00 10 00 01 00 00 00 00 00 00 00
50: 05 00 84 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 12 00 10 00 0f 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 06 00 00 2c d6 01 b4 00 d6 01 b4 00
90: d6 01 b4 00 d6 01 b4 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 b8 00 00 00 00 00 00 00 b8 00 00
b0: 00 00 00 00 00 b8 00 00 00 00 00 00 00 b8 00 00
c0: 00 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI0)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00: 02 10 87 43 07 00 a0 02 00 10 03 0c 08 40 80 00
10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 87 43
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00
40: 80 1f 00 00 0a 84 b7 18 07 35 00 00 00 00 00 00
50: 00 9c 00 00 00 00 00 00 ff ff ff ff ff 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI1)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00: 02 10 88 43 07 00 a0 02 00 10 03 0c 08 40 00 00
10: 00 d0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 88 43
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI2)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00: 02 10 89 43 07 00 a0 02 00 10 03 0c 08 40 00 00
10: 00 c0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 89 43
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00: 02 10 8a 43 07 00 a0 02 00 10 03 0c 08 40 00 00
10: 00 b0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 8a 43
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00: 02 10 8b 43 07 00 a0 02 00 10 03 0c 08 40 00 00
10: 00 a0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 8b 43
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB600 USB Controller (EHCI)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00: 02 10 86 43 17 00 b0 02 00 20 03 0c 10 40 00 00
10: 00 90 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 86 43
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 40 00 0e 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 01 00 00 08 c0 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
Subsystem: ATI Technologies Inc SBx00 SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00: 02 10 85 43 03 04 30 02 14 00 05 0c 00 00 80 00
10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 85 43
30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
40: d4 3b 00 04 00 00 00 00 0f ff 00 00 00 00 00 00
50: f0 01 f0 0c f0 0f f0 0f 11 0b f0 0f 00 00 00 00
60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
90: 01 0b 00 00 bb de ff 00 00 00 00 00 00 00 00 00
a0: 00 00 ff ff ff ff f0 08 00 ff 11 06 16 79 20 18
b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 30 01
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP])
Subsystem: ATI Technologies Inc SB600 IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f900 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: pata_atiixp, atiixp
00: 02 10 8c 43 05 00 20 02 00 8a 01 01 00 40 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 01 f9 00 00 00 00 00 00 00 00 00 00 02 10 8c 43
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00
40: 20 20 00 00 20 20 00 00 00 00 44 00 00 00 00 00
50: 00 00 00 00 03 00 25 00 00 00 00 00 00 00 00 00
60: 00 00 40 00 10 2c 01 07 01 00 00 00 ff ff 0f 00
70: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
Subsystem: Biostar Microtech Int'l Corp Device 820c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00: 02 10 83 43 06 00 10 04 00 00 03 04 08 40 00 00
10: 04 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 0c 82
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 00 00 00
40: 00 00 02 00 00 00 00 00 00 00 00 00 01 00 00 00
50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
Subsystem: ATI Technologies Inc SB600 PCI to LPC Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00: 02 10 8d 43 0f 00 20 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 8d 43
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 04 00 00 00 ff ff c3 ff 07 ff 42 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 0a 00 00 0e 00 0f 00 b8 ff ff ff
70: 67 45 23 01 00 00 00 00 01 00 00 00 05 00 00 00
80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 c1 fe 00 00 00 00 00 00 00 00 00 00 00 00
b0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: fd800000-fd8fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00
10: 00 00 00 00 00 00 00 00 00 05 05 40 a0 a0 80 22
20: 90 fd 90 fd 80 fd 80 fd 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 26 00 3c ff 00 00 00 00 0c 01 3f d1 00 01 00 00
50: 01 00 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff
60: ca 0e 17 00 ba 18 10 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06
e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: 1.4GHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
60: 00 00 03 00 e0 00 00 00 20 a8 4e 00 00 f8 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 20 11 11 60 08 f5 ff 13 00 00 00
90: 92 02 85 04 00 00 00 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 3f 01 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 0a 00 00 00 0b 00 00 00 00 00 00 00 00 00 00
90: 03 00 c0 00 00 ff df 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 03 00 f0 00 00 02 fe 00
b0: 03 00 e0 00 80 5f e0 00 00 00 00 00 00 00 00 00
c0: 13 a0 00 00 00 f0 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00
f0: 03 40 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 06 00 08 0b 00 00 00 00
80: 22 00 00 00 40 00 00 00 26 99 14 0c 45 60 92 00
90: 10 08 01 00 0c 00 58 3f 07 42 00 8d 00 00 00 00
a0: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 6e 9c 74 58 dc 00 00 00 07 cf 00 00 00 fd ff ff
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: ff 7f 7c f0 1b 7f bf ff f0 ff 00 f8 fa 04 78 fe
e0: 00 00 30 e7 f8 e1 01 fc 3f 30 00 f0 f3 09 ef 1c
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: 00 01 00 00 5c 00 b0 4a 00 00 00 00 00 00 00 00
50: d8 5c 7c 0f ff 9d 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 04 00 24 34 00 00 00 30 52 80 01 00
70: 53 11 04 00 01 01 18 00 14 0c 20 00 14 09 09 00
80: 81 e6 00 e6 e6 41 e6 01 08 00 00 00 00 00 40 00
90: 00 00 00 00 ef 7b 00 00 f0 ff f0 7f 00 00 00 00
a0: 00 09 02 80 80 18 8c 25 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 24 0f 81 c8 15 1c 00 03 22 63 47 01
e0: 00 00 00 00 30 0c c0 1f 79 3f 07 02 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 42 0f 10 00
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600 GT (rev a1) (prog-if 00 [VGA controller])
Subsystem: Device 196e:0440
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
00: de 10 02 04 07 00 10 00 a1 00 00 03 00 00 00 00
10: 00 00 00 fa 0c 00 00 c0 00 00 00 00 04 00 00 f8
20: 00 00 00 00 01 df 00 00 00 00 00 00 6e 19 40 04
30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 00 00
40: 6e 19 40 04 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00
80: 10 29 00 00 01 3d 01 00 48 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 218
Region 0: Memory at fdbe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fdbc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cf00 [size=32]
[virtual] Expansion ROM at fda00000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0f00c Data: 4142
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Device Serial Number 1b-09-0f-ff-ff-21-1b-00
Kernel driver in use: e1000e
Kernel modules: e1000e
00: 86 80 b9 10 07 04 10 00 06 00 00 02 08 00 00 00
10: 00 00 be fd 00 00 bc fd 01 cf 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 83 10
30: 00 00 00 00 c8 00 00 00 00 00 00 00 03 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 21
d0: 05 e0 81 00 0c f0 e0 fe 00 00 00 00 42 41 00 00
e0: 10 00 01 00 c1 0c 00 00 10 28 1a 00 11 64 03 00
f0: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 5: Memory at fdffe000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at fde00000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: ahci
Kernel modules: ahci
00: 7b 19 63 23 07 00 10 00 03 01 06 01 08 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 e0 ff fd 00 00 00 00 7b 19 63 23
30: 00 00 00 00 68 00 00 00 00 00 00 00 05 01 00 00
40: bf a1 c2 80 08 08 ff f0 20 00 00 20 00 00 00 00
50: 10 00 11 02 00 00 00 00 00 20 0c 00 11 44 02 01
60: 40 00 11 10 00 00 00 00 01 50 02 40 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 a0 01 0a 00 0f aa 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 80
c0: c3 8b 38 00 03 45 02 00 53 00 00 00 0f a0 a6 00
d0: 18 00 00 80 01 00 00 10 41 00 eb 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 18 35 9c c2 01 a0 00 84
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at bf00 [size=8]
Region 1: I/O ports at be00 [size=4]
Region 2: I/O ports at bd00 [size=8]
Region 3: I/O ports at bc00 [size=4]
Region 4: I/O ports at bb00 [size=16]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron, jmicron
00: 7b 19 63 23 05 00 10 00 03 85 01 01 00 00 00 00
10: 01 bf 00 00 01 be 00 00 01 bd 00 00 01 bc 00 00
20: 01 bb 00 00 00 00 00 00 00 00 00 00 7b 19 63 23
30: 00 00 00 00 68 00 00 00 00 00 00 00 00 02 00 00
40: bf a1 c2 80 08 08 ff f0 20 00 00 20 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 00 02 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 a0 01 0a 00 0f aa 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 80
c0: c3 8b 38 00 03 45 02 00 53 00 00 00 0f a0 a6 00
d0: 18 00 00 80 01 00 00 10 41 00 eb 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 18 35 9c c2 01 a0 00 84
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 13)
Subsystem: Biostar Microtech Int'l Corp Device 2700
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 219
Region 0: Memory at fddfc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at ee00 [size=256]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0f00c Data: 4132
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: sky2
Kernel modules: sky2
00: ab 11 64 43 07 04 10 00 13 00 00 02 08 00 00 00
10: 04 c0 df fd 00 00 00 00 01 ee 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 00 27
30: 00 00 00 00 48 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 f0 01 00 80 a0 01 01 50 03 fe 00 20 00 13
50: 03 5c 7c 80 00 00 00 01 00 00 00 01 05 e0 81 00
60: 0c f0 e0 fe 00 00 00 00 32 41 00 00 00 00 00 00
70: 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 70 00 00 00 00 00 00 82 a8 e8 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 10 00 11 00 c0 8f 00 00 00 20 19 00 11 ac 07 03
f0: 48 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
05:05.0 Class ff00: Compro Computer Services, Inc. Device 4610 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at af00 [size=64]
Region 1: Memory at fd9ff000 (32-bit, non-prefetchable) [size=4K]
00: 90 10 10 46 07 00 00 00 03 00 00 ff 00 40 00 00
10: 01 af 00 00 00 f0 9f fd 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
05:06.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03)
Subsystem: Adaptec Device 3869
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at ac00 [disabled] [size=256]
Region 1: Memory at fd9fe000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fd800000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
00: 04 90 60 38 06 00 90 02 03 00 00 01 08 40 00 00
10: 01 ac 00 00 00 e0 9f fd 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 69 38
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 04 04
40: 80 11 00 80 80 11 00 80 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 21 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
05:07.0 Class ff00: Compro Computer Services, Inc. Device 4610 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at ae00 [size=64]
Region 1: Memory at fd9fd000 (32-bit, non-prefetchable) [size=4K]
00: 90 10 10 46 07 00 00 00 03 00 00 ff 00 40 00 00
10: 01 ae 00 00 00 d0 9f fd 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-19 15:54 ` Mark Hounschell
@ 2009-02-20 11:53 ` Andreas Herrmann
2009-02-20 12:34 ` Ingo Molnar
2009-02-20 15:43 ` Mark Hounschell
0 siblings, 2 replies; 59+ messages in thread
From: Andreas Herrmann @ 2009-02-20 11:53 UTC (permalink / raw)
To: Mark Hounschell
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 1305 bytes --]
On Thu, Feb 19, 2009 at 10:54:19AM -0500, Mark Hounschell wrote:
> Borislav Petkov wrote:
> > On Thu, Feb 19, 2009 at 10:16:40AM -0500, Mark Hounschell wrote:
> >> Andreas Herrmann wrote:
> >>> Hi Mark,
> >>>
> >>> Can you please provide us output of lspci -vvxxx.
> >>> (Please run this as root.)
> >>>
>
> Attached...
>
>
> >>> Furthermore you can try booting your 1000HZ kernel
> >>> with following kernel command lines:
> >>>
Thanks for trying this out.
But nothing suspicious found. I.e. timer/hpet interrupt is enabled
and its routing seems to be ok.
Here's one more check that's worth trying: In one of your logs I've
seen that HPET id reports 3 timers but later on 4 timers were detected
for HPET.
To check what's going on I'd like to see the HPET configuration in the
course of booting your system. Please apply attached patch and boot
with hpet=debug -- both with 250HZ and with 1000HZ -- and provide dmesg
output.
Regards,
Andreas
--
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
[-- Attachment #2: hpet-debug.diff --]
[-- Type: text/plain, Size: 3890 bytes --]
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 388254f..2a389d9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -80,6 +80,7 @@ static inline void hpet_clear_mapping(void)
*/
static int boot_hpet_disable;
int hpet_force_user;
+static int hpet_debug;
static int __init hpet_setup(char *str)
{
@@ -88,6 +89,8 @@ static int __init hpet_setup(char *str)
boot_hpet_disable = 1;
if (!strncmp("force", str, 5))
hpet_force_user = 1;
+ if (!strncmp("debug", str, 5))
+ hpet_debug = 1;
}
return 1;
}
@@ -119,6 +122,42 @@ int is_hpet_enabled(void)
}
EXPORT_SYMBOL_GPL(is_hpet_enabled);
+static void _hpet_print_config(const char *function, int line)
+{
+ u32 l, h;
+ printk(KERN_DEBUG "hpet: %s(%d):\n", function, line);
+ l = hpet_readl(HPET_ID); h = hpet_readl(HPET_PERIOD);
+ printk(KERN_DEBUG "hpet: ID: %x, PERIOD: %x\n", l, h);
+ l = hpet_readl(HPET_CFG); h = hpet_readl(HPET_STATUS);
+ printk(KERN_DEBUG "hpet: CFG: %x, STATUS: %x\n", l, h);
+ l = hpet_readl(HPET_COUNTER); h = hpet_readl(HPET_COUNTER+4);
+ printk(KERN_DEBUG "hpet: COUNTER_l: %x, COUNTER_h: %x\n", l, h);
+ l = hpet_readl(HPET_T0_CFG); h = hpet_readl(HPET_T0_CFG+4);
+ printk(KERN_DEBUG "hpet: T0_CFG_l: %x, T0_CFG_h: %x\n", l, h);
+ l = hpet_readl(HPET_T0_CMP); h = hpet_readl(HPET_T0_CMP+4);
+ printk(KERN_DEBUG "hpet: T0_CMP_l: %x, T0_CMP_h: %x\n", l, h);
+ l = hpet_readl(HPET_T0_ROUTE); h = hpet_readl(HPET_T0_ROUTE+4);
+ printk(KERN_DEBUG "hpet: T0_ROUTE_l: %x, T0_ROUTE_h: %x\n", l, h);
+ l = hpet_readl(HPET_T1_CFG); h = hpet_readl(HPET_T1_CFG+4);
+ printk(KERN_DEBUG "hpet: T1_CFG_l: %x, T1_CFG_h: %x\n", l, h);
+ l = hpet_readl(HPET_T1_CMP); h = hpet_readl(HPET_T1_CMP+4);
+ printk(KERN_DEBUG "hpet: T1_CMP_l: %x, T1_CMP_h: %x\n", l, h);
+ l = hpet_readl(HPET_T1_ROUTE); h = hpet_readl(HPET_T1_ROUTE+4);
+ printk(KERN_DEBUG "hpet: T1_ROUTE_l: %x, T1_ROUTE_h: %x\n", l, h);
+ l = hpet_readl(HPET_T2_CFG); h = hpet_readl(HPET_T2_CFG+4);
+ printk(KERN_DEBUG "hpet: T2_CFG_l: %x, T2_CFG_h: %x\n", l, h);
+ l = hpet_readl(HPET_T2_CMP); h = hpet_readl(HPET_T2_CMP+4);
+ printk(KERN_DEBUG "hpet: T2_CMP_l: %x, T2_CMP_h: %x\n", l, h);
+ l = hpet_readl(HPET_T2_ROUTE); h = hpet_readl(HPET_T2_ROUTE+4);
+ printk(KERN_DEBUG "hpet: T2_ROUTE_l: %x, T2_ROUTE_h: %x\n", l, h);
+}
+
+#define hpet_print_config() \
+do { \
+ if (hpet_debug) \
+ _hpet_print_config(__FUNCTION__, __LINE__); \
+} while (0)
+
/*
* When the hpet driver (/dev/hpet) is enabled, we need to reserve
* timer 0 and timer 1 in case of RTC emulation.
@@ -264,6 +303,7 @@ static void hpet_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
+ hpet_print_config();
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
delta >>= evt->shift;
now = hpet_readl(HPET_COUNTER);
@@ -280,6 +320,8 @@ static void hpet_set_mode(enum clock_event_mode mode,
hpet_writel(cmp, HPET_Tn_CMP(timer));
udelay(1);
hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
+ WARN_ON(cmp <= hpet_readl(HPET_COUNTER));
+ hpet_print_config();
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -524,6 +566,7 @@ static void hpet_msi_capability_lookup(unsigned int start_timer)
num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
num_timers++; /* Value read out starts from 0 */
+ hpet_print_config();
hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL);
if (!hpet_devs)
@@ -791,6 +834,7 @@ int __init hpet_enable(void)
* information and the number of channels
*/
id = hpet_readl(HPET_ID);
+ hpet_print_config();
#ifdef CONFIG_HPET_EMULATE_RTC
/*
@@ -843,6 +887,7 @@ static __init int hpet_late_init(void)
return -ENODEV;
hpet_reserve_platform_timers(hpet_readl(HPET_ID));
+ hpet_print_config();
for_each_online_cpu(cpu) {
hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu);
^ permalink raw reply related [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 11:53 ` Andreas Herrmann
@ 2009-02-20 12:34 ` Ingo Molnar
2009-02-20 21:51 ` Andreas Herrmann
2009-02-20 15:43 ` Mark Hounschell
1 sibling, 1 reply; 59+ messages in thread
From: Ingo Molnar @ 2009-02-20 12:34 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Mark Hounschell, Borislav Petkov, Mark Hounschell, john stultz,
linux-kernel, Thomas Gleixner
* Andreas Herrmann <andreas.herrmann3@amd.com> wrote:
> On Thu, Feb 19, 2009 at 10:54:19AM -0500, Mark Hounschell wrote:
> > Borislav Petkov wrote:
> > > On Thu, Feb 19, 2009 at 10:16:40AM -0500, Mark Hounschell wrote:
> > >> Andreas Herrmann wrote:
> > >>> Hi Mark,
> > >>>
> > >>> Can you please provide us output of lspci -vvxxx.
> > >>> (Please run this as root.)
> > >>>
> >
> > Attached...
> >
> >
> > >>> Furthermore you can try booting your 1000HZ kernel
> > >>> with following kernel command lines:
> > >>>
>
> Thanks for trying this out.
> But nothing suspicious found. I.e. timer/hpet interrupt is enabled
> and its routing seems to be ok.
>
> Here's one more check that's worth trying: In one of your logs I've
> seen that HPET id reports 3 timers but later on 4 timers were detected
> for HPET.
>
> To check what's going on I'd like to see the HPET
> configuration in the course of booting your system. Please
> apply attached patch and boot with hpet=debug -- both with
> 250HZ and with 1000HZ -- and provide dmesg output.
Mind sending this patch as a hpet=verbose feature patch which we
could queue up for upstream merging? We have hpet problems
frequently, so some built-in debug/verbosity trigger would be
nice.
Ingo
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 11:53 ` Andreas Herrmann
2009-02-20 12:34 ` Ingo Molnar
@ 2009-02-20 15:43 ` Mark Hounschell
2009-02-20 16:08 ` Andreas Herrmann
1 sibling, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-20 15:43 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 7149 bytes --]
Andreas Herrmann wrote:
> On Thu, Feb 19, 2009 at 10:54:19AM -0500, Mark Hounschell wrote:
>> Borislav Petkov wrote:
>>> On Thu, Feb 19, 2009 at 10:16:40AM -0500, Mark Hounschell wrote:
>>>> Andreas Herrmann wrote:
>>>>> Hi Mark,
>>>>>
>>>>> Can you please provide us output of lspci -vvxxx.
>>>>> (Please run this as root.)
>>>>>
>> Attached...
>>
>>
>>>>> Furthermore you can try booting your 1000HZ kernel
>>>>> with following kernel command lines:
>>>>>
>
> Thanks for trying this out.
> But nothing suspicious found. I.e. timer/hpet interrupt is enabled
> and its routing seems to be ok.
>
> Here's one more check that's worth trying: In one of your logs I've
> seen that HPET id reports 3 timers but later on 4 timers were detected
> for HPET.
>
> To check what's going on I'd like to see the HPET configuration in the
> course of booting your system. Please apply attached patch and boot
> with hpet=debug -- both with 250HZ and with 1000HZ -- and provide dmesg
> output.
>
>
Here is the short 1000Hz bootlog. I'm afraid non of your debug output made it
out however. I thought it was because it just wasn't getting that far but
looking at the 250Hz log I don't see any there either???
The patch applied (with fuz) to both kernel sources and I built/installed them
from clean. I don't find any messages starting with "hpet:" in either trace???
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #7 SMP PREEMPT Fri Feb
20 09:01:29 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 374d0000 - 37feff4c
Allocated new RAMDISK: 004a7000 - 00fc6f4c
Move RAMDISK from 00000000374d0000 - 0000000037feff4b to 004a7000 - 00fc6f4b
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc6f4c] NEW RAMDISK ==> [00004a7000 - 0000fc6f4c]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 apm=off
selinux=0 noresume splash=silent apic=debug hpet=debug console=ttyS0,19200n
8 vga=normal
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3000.099 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103456k/3145600k available (1836k kernel code, 40784k reserved, 1098k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02cb187 - 0xc03ddc4c (1098 kB)
.text : 0xc0100000 - 0xc02cb187 (1836 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPE
A complete 250Hz version is attached.
Regards
Mark
[-- Attachment #2: d.bootlog-250Hz.txt --]
[-- Type: text/plain, Size: 49224 bytes --]
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #7 SMP PREEMPT Fri Feb 2
0 09:01:54 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 374cf000 - 37fef1ba
Allocated new RAMDISK: 004a7000 - 00fc71ba
Move RAMDISK from 00000000374cf000 - 0000000037fef1b9 to 004a7000 - 00fc71b9
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc71ba] NEW RAMDISK ==> [00004a7000 - 0000fc71ba]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 apm=off selinux=0 noresume splash=silent apic=debug hpet=debug console=ttyS0,19200n
8 vga=normal
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3000.190 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103452k/3145600k available (1836k kernel code, 40788k reserved, 1098k data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02cb157 - 0xc03ddc4c (1098 kB)
.text : 0xc0100000 - 0xc02cb157 (1836 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.38 BogoMIPS (lpj=12000760)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1250071
... PM timer delta = 357950
... PM timer result ok
..... delta 1250071
..... mult: 53686785
..... calibration result: 800045
..... CPU clock speed is 3000.0679 MHz.
..... host bus clock speed is 200.0045 MHz.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 6000.41 BogoMIPS (lpj=12000822)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
masked ExtINT on CPU#2
Calibrating delay using timer specific routine.. 6000.40 BogoMIPS (lpj=12000818)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
masked ExtINT on CPU#3
Calibrating delay using timer specific routine.. 6000.41 BogoMIPS (lpj=12000824)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (24001.61 BogoMIPS).
net_namespace: 776 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:14.4: transparent bridge
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
... APIC ID: 00000000 (0)
... APIC VERSION: 80050010
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ID: 01000000 (1)
... APIC VERSION: 80050010
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ID: 02000000 (2)
... APIC VERSION: 80050010
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000001000
... APIC ID: 03000000 (3)
... APIC VERSION: 80050010
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000001000
testing the IO APIC.......................
.................................... done.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0d: mem resource (0xf0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x1fffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x100000-0xbffdffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: ioport range 0x4100-0x411f has been reserved
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd0-0xcd1 has been reserved
system 00:01: ioport range 0xcd2-0xcd3 has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:01: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x220-0x225 has been reserved
system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved
system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0xd000-0xdfff
pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff
pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: 0xc000-0xcfff
pci 0000:00:04.0: MEM window: 0xfdb00000-0xfdbfffff
pci 0000:00:04.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
pci 0000:00:06.0: IO window: 0xb000-0xbfff
pci 0000:00:06.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:06.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: 0xe000-0xefff
pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:07.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xfd900000-0xfd9fffff
pci 0000:00:14.4: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
bus: 01 index 2 mmio: [0xc0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xc000-0xcfff]
bus: 02 index 1 mmio: [0xfdb00000-0xfdbfffff]
bus: 02 index 2 mmio: [0xfda00000-0xfdafffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xb000-0xbfff]
bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff]
bus: 03 index 2 mmio: [0xfde00000-0xfdefffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0xe000-0xefff]
bus: 04 index 1 mmio: [0xfdd00000-0xfddfffff]
bus: 04 index 2 mmio: [0xfdc00000-0xfdcfffff]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 io port: [0xa000-0xafff]
bus: 05 index 1 mmio: [0xfd900000-0xfd9fffff]
bus: 05 index 2 mmio: [0xfd800000-0xfd8fffff]
bus: 05 index 3 io port: [0x00-0xffff]
bus: 05 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 11392k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1235121981.180:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1717
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport-driver 0000:00:02.0: found MSI capability
pcieport-driver 0000:00:04.0: found MSI capability
pcieport-driver 0000:00:06.0: found MSI capability
pcieport-driver 0000:00:07.0: found MSI capability
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 276k freed
doing fast boot
Boot logging started on /dev/ttSCSI subsystem initialized
yS0(/dev/console) at Fri Feb 20 pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
09:26:22 2009
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
scsi0 : pata_jmicron
FATAL: Module prscsi1 : pata_jmicron
ocessor not founata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
d.
FATAL: Module thermal not found.
logips2pp: Detected unknown logitech mouse model 11
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata5: failed due to HW bug, retry pmp=0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907
hda: ST3120023A, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hda: UDMA/100 mode selected
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
aic7xxx 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
scsi 8:0:0:0: Direct-Access SEAGATE ST15150N 5052 PQ: 0 ANSI: 2
scsi8:A:0:0: Tagged Queuing enabled. Depth 32
target8:0:0: Beginning Domain Validation
target8:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
target8:0:0: Domain Validation skipping write tests
target8:0:0: Ending Domain Validation
scsi 8:0:2:0: Sequential-Access ARCHIVE Python 01931-XXX 5.63 PQ: 0 ANSI: 2
target8:0:2: Beginning Domain Validation
target8:0:2: FAST-10 SCSI 7.8 MB/s ST (128 ns, offset 15)
target8:0:2: Domain Validation skipping write tests
target8:0:2: Ending Domain Validation
FATAL: Module fan not found.
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
sky2 driver version 1.22
sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 5
sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
sky2 eth0: addr 00:e0:4d:7a:8c:ee
Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Creating device nodes with udev
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ohci_hcd 0000:00:13.0: OHCI Host Controller
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
sd 8:0:0:0: [sdd] READ CAPACITY failed
sd 8:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 8:0:0:0: [sdd] Sense Key : Medium Error [current]
sd 8:0:0:0: [sdd] Add. Sense: Medium format corrupted
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 8:0:0:0: [sdd] Attached SCSI disk
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
usb 1-1: new full speed USB device using ohci_hcd and address 2
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28.3-250Hz ehci_hcd
usb usb2: SerialNumber: 0000:00:13.5
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb usb3: configuration #1 chosen from 1 choice
usb 1-1: device not accepting address 2, error -62
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 1
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
usb 2-1: new high speed USB device using ehci_hcd and address 2
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=03f0, idProduct=5111
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Photosmart 3200 series
usb 2-1: Manufacturer: HP
usb 2-1: SerialNumber: MY5B98310Z045K
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
usb 1-2: new full speed USB device using ohci_hcd and address 4
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb 1-2: device descriptor read/64, error -62
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb 1-2: device descriptor read/64, error -62
usb usb6: SerialNumber: 0000:00:13.4
Waiting for device /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 to appear: ok
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
fsck 1.40.8 (13-Mar-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/dusb 1-2: new full speed USB device using ohci_hcd and address 5
isk/by-id/ata-ST3320620AS_6QF4HDV5-part5
usb 1-2: device descriptor read/64, error -62
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5: Superblock last kjournald starting. Commit interval 5 seconds
write time is inEXT3 FS on sda5, the future. FIinternal journal
XED.
/dev/diskEXT3-fs: mounted filesystem with ordered data mode.
/by-id/ata-ST3320620AS_6QF4HDV5-part5: clean, 346619/3280320 files, 4787045/6554512 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/ata-ST3320620AS_6Qusb 1-2: device descriptor read/64, error -62
F4HDV5-part5
usb 1-2: new full speed USB device using ohci_hcd and address 6
INIT: version 2.86 booting
usb 1-2: device not accepting address 6, error -62
usb 1-2: new full speed USB device using ohci_hcd and address 7
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc sb 1-2: device not accepting address 7, error -62
mdone ub 1-0:1.0: unable to enumerate USB device on port 2
h
Mounting sysfs at /sys done
Mounting debugfs at /sys/kernel/debug done
Initializing /dev done
Mounting devpts at /dev/pts done
done
Starting udevd: sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: Attached scsi generic sg3 type 0
scsi 8:0:2:0: Attached scsi generic sg4 type 1
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
st: Version 20080504, fixed bufsize 32768, s/g segs 256
0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:02:00.0: eth1: MAC: 1, PHY: 4, PBA No: d50854-003
Driver 'st' needs updating - please use bus_type methods
st 8:0:2:0: Attached scsi tape st0
st 8:0:2:0: st0: try direct i/o: yes (alignment 4 B)
Linux agpgart interface v0.103
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
USB Mass Storage support registered.
usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
usbcore: registered new interface driver usblp
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Driver 'osst' needs updating - please use bus_type methods
ide-cd driver 5.00
ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ppdev: user-space parallel port driver
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
done
Loading required kernel modules done
Activating swap-devices in /etc/fstab...
Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
Adding 8393952k swap on /dev/sdb2. Priority:-2 extents:1 across:83939done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
mount: according to mtab, /dev/sda5 is already mounted on /
Setting up the hardware clock done
Activating device mapper...
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
done
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /11.1] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part5
/dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part5: clean, 244963/1640160 files, 1886024/6554512 blocks
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part1
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part1: clean, 141/131616 files, 97801/263056 blocks
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part6
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part6: clean, 84104/5903072 files, 1455969/11797726 blocks
[/sbin/fsck.ext3 (1) -- /misc] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part7
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part7: clean, 10/8536064 files, 313923/17040940 blocks
[/sbin/fsck.ext3 (1) -- /usr/local] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part8
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part8: clean, 10111/656000 files, 562964/1311297 blocks
[/sbin/fsck.ext3 (1) -- /usr/src] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part9
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part9: clean, 988853/6557152 files, 10060855/13109032 blocks
[/sbin/fsck.ext3 (1) -- /misc1] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part10
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part10: clean, 13/12992512 files, 455787/25967056 blocks
[/sbin/fsck.ext3 (1) -- /11.1/boot] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part1
/dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part1: clean, 50/65808 files, 23165/263056 blocks
[/sbin/fsck.ext3 (1) -- /11.1/home] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part6
/dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part6: clean, 85254/2951536 files, 1459985/11797726 blocks
[/sbin/fsck.ext3 (1) -- /11.1/misc] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part7
/dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part7: clean, 10/4268032 files, 313922/17040940 blocks
[/sbin/fsck.ext3 (1) -- /11.1/usr/local] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part8
/dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part8: clean, 10114/328000 files, 562986/1311297 blocks
[/sbin/fsck.ext3 (1) -- /11.1/usr/src] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part9
/dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part9: clean, 224708/3278576 files, 2125826/13109032 blocks
[/sbin/fsck.ext3 (1) -- /11.1/misc1] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part10
scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: [sde] Attached SCSI removable disk
sd 9:0:0:0: Attached scsi generic sg5 type 0
/dev/disk/by-id/ata-ST3320620AS_6QF4HZYT-part10: clean, 11/6496256 files, 455784/25967056 blocks
[/sbin/fsck.ext3 (1) -- /local] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDWN-part1
/dev/disk/by-id/ata-ST3320620AS_6QF4HDWN-part1: clean, 1673848/39075840 files, 21295338/78142160 blocks
[/sbin/fsck.ext3 (1) -- /lcrs] fsck.ext3 -a /dev/disk/by-id/ata-ST3120023A_3KA0P431-part1
/dev/disk/by-id/ata-ST3120023A_3KA0P431-part1: clean, 32325/14663680 files, 24187969/29302552 blloop: module loaded
ocks done
journald starting. Commit interval 5 seconds
XT3 FS odointernal journal
ne
EXT3-fs: mounted filesystem with ordered data mode.
Mounting local file systems...
kjournald starting. Commit interval 5 seconds
proc on /proc tyEXT3 FS on sda6, internal journal
pe proc (rw)
syEXT3-fs: mounted filesystem with ordered data mode.
sfs on /sys type sysfs (rw)
debkjournald starting. Commit interval 5 seconds
ugfs on /sys/kerEXT3 FS on sda7, internal journal
nel/debug type dEXT3-fs: mounted filesystem with ordered data mode.
ebugfs (rw)
udev on /dev type tmpfs (rw)
devptkjournald starting. Commit interval 5 seconds
s on /dev/pts tyEXT3 FS on sda8, pe devpts (rw,mointernal journal
de=0620,gid=5)
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda1 on /boot type ext3 (rw,acl,user_xattr)kjournald starting. Commit interval 5 seconds
/dev/sda6 on /EXT3 FS on sda9, internal journal
home type ext3 (EXT3-fs: mounted filesystem with ordered data mode.
rw,acl,user_xattr)
/dev/sda7 on /misc type ext3 (rw,acl,user_xakjournald starting. Commit interval 5 seconds
ttr)
/dev/sda8 EXT3 FS on sda10, internal journal
on /usr/local tyEXT3-fs: mounted filesystem with ordered data mode.
pe ext3 (rw,acl,user_xattr)
/dev/sda9 on /usr/src type ext3 (rw,acl,user_xattr)kjournald starting. Commit interval 5 seconds
/dev/sda10 on EXT3 FS on sdb5, internal journal
/misc1 type ext3EXT3-fs: mounted filesystem with ordered data mode.
(rw,acl,user_xattr)
/dev/sdb5 on /11.1 type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sdb1 on /11.1/boot type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sdb6 on /11.1/home type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sdb7 on /11.1/misc type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sdb8 on /11.1/usr/local type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sdb9 on /11.1/usr/src type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sdb10 on /11.1/misc1 type ext3 (rw,acl,userkjournald starting. Commit interval 5 seconds
_xattr)
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sdc1 on /local type ext3 (rkjournald starting. Commit interval 5 seconds
w,acl,user_xattrEXT3 FS on hda1, )
internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/hda1 on /lcrs type ext3 (rw,acl,user_xattr) done
Retry device configuration: done
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports done
fuse init (API version 7.10)
Loading fuse module done
Mounting fuse control filesystem done
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Mounting securityfs on /sys/kernel/security done
ls: cannot access /sys/module/apparmor: No such file or directory
ls: cannot access /sys/module/apparmor: No such file or directory
Loading AppArmor module failed
Enabling syn flood protection done
Disabling IP forwarding done
done
Creating /var/log/boot.msg done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Activating remaining swap-devices in /etc/fstab... done
Setting up hostname 'harley' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
System Boot Control: The system has been set up
Failed features: boot.apparmor
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
Linking /usr/src/linix to /usr/src/linux-2.6.28.3-250Hz
No rtom kernel driver found in /lib/modules/2.6.28.3-250Hz/misc
kernel.shmmax = 81943040 done
INIT: Entering runlevel: 5
Boot logging started on /dev/ttyS0(/dev/console) at Fri Feb 20 09:27:00 2009
Master Resource Control: previous runlevel: N, switching to runlevel: 5
mkdir: cannot create directory `/dev/cpuset': File exists
mount: cpuset already mounted or /dev/cpuset busy
mount: according to mtab, cpuset is already mounted on /dev/cpuset
acpid: starting up
Starting resource manager done
Starting acpid done
Initializing random number generator done
acpid: 1 rule loaded
Starting D-Bus daemonStarting syslog services done
done
Starting ConsoleKit done
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemonip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Starting Firewall Initialization (phase 1 of 2) done
done
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8 done
eth0 device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 13)
eth0 IP address: 10.10.10.100/24 done
eth1 device: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
eth1 IP address: 192.168.10.100/24 done
Waiting for mandatory devices: eth2 eth3 __NSC__
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
eth2 No interface found failed
eth3 No interface found failed
Setting up service network . . . . . . . . . . . . . . failed
Starting service kdm done
Mount CIFS File Systems unused
VMware Server is installed, but it has not been (correctly) configured
for the running kernel. To (re-)configure it, invoke the
following command: /usr/bin/vmware-config.pl.
Starting RPC portmap daemon done
Loading Module rfm2g.
=========================================================
COPYRIGHT NOTICE
Copyright (C) 2002, 2004 GE Fanuc Embedded Systems, Inc.
International Copyright Secured. All Rights Reserved.
=========================================================
cat: /proc/rfm2g: No such file or directory
/etc/init.d/rfm2g_init: line 84: [: 0: unary operator expected
chmod: cannot access `/dev/rfm2g[0-4]': No such file or directory
failed
Starting auditd done
Starting SSH daemon done
Starting cupsd done
Starting Avahi daemon. done
Starting Avahi DNS Configuration daemon done
Initializing gpib boards
FATAL: Module tnt4882 not found.
failed to open device file '/dev/gpib0'
main: No such file or directory
failed to open device file '/dev/gpib1'
main: No such file or directory
failed
Loading keymap i386/qwerty/us.map.gz done
Clearing PCIRMS Sram Memory
prm_clear_sram: prm_mmap_open failed: No such device
PCIRMS Board 0 SRAM Cleared with option local
done
Loading compose table latin1.add done
Start Unicode mode done
Loading console font lat9w-16.psfu -m trivial G0:loadable done
ntpd: time slew +0.025589s
Starting network time protocol daemon (NTPD) done
Starting Name Service Cache Daemon done
Starting mail service (Postfix) done
Starting CRON daemon done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
done
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network vmware gpib rfm2g_init
Skipped services in runlevel 5: smbfs prm prm_dmatest prm_healthy splash
Offline
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 15:43 ` Mark Hounschell
@ 2009-02-20 16:08 ` Andreas Herrmann
2009-02-20 16:38 ` Andreas Herrmann
2009-02-20 17:06 ` Mark Hounschell
0 siblings, 2 replies; 59+ messages in thread
From: Andreas Herrmann @ 2009-02-20 16:08 UTC (permalink / raw)
To: Mark Hounschell
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
On Fri, Feb 20, 2009 at 10:43:03AM -0500, Mark Hounschell wrote:
> Andreas Herrmann wrote:
> > On Thu, Feb 19, 2009 at 10:54:19AM -0500, Mark Hounschell wrote:
> >> Borislav Petkov wrote:
> >>> On Thu, Feb 19, 2009 at 10:16:40AM -0500, Mark Hounschell wrote:
> >>>> Andreas Herrmann wrote:
> >>>>> Hi Mark,
> >>>>>
> >>>>> Can you please provide us output of lspci -vvxxx.
> >>>>> (Please run this as root.)
> >>>>>
> >> Attached...
> >>
> >>
> >>>>> Furthermore you can try booting your 1000HZ kernel
> >>>>> with following kernel command lines:
> >>>>>
> >
> > Thanks for trying this out.
> > But nothing suspicious found. I.e. timer/hpet interrupt is enabled
> > and its routing seems to be ok.
> >
> > Here's one more check that's worth trying: In one of your logs I've
> > seen that HPET id reports 3 timers but later on 4 timers were detected
> > for HPET.
> >
> > To check what's going on I'd like to see the HPET configuration in the
> > course of booting your system. Please apply attached patch and boot
> > with hpet=debug -- both with 250HZ and with 1000HZ -- and provide dmesg
> > output.
> >
> >
>
> Here is the short 1000Hz bootlog. I'm afraid non of your debug output made it
> out however.
Sigh.
> I thought it was because it just wasn't getting that far but
> looking at the 250Hz log I don't see any there either???
> The patch applied (with fuz) to both kernel sources and I built/installed them
> from clean. I don't find any messages starting with "hpet:" in either trace???
Your 250HZ kernel was built on Feb, 2nd, right?
So the patch wasn't applied I guess, no?
> Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #7 SMP PREEMPT Fri Feb
> 20 09:01:29 EST 2009
I assume the patch was aplied.
> Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1
> 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux)
> ) #7 SMP PREEMPT Fri Feb 2 0 09:01:54 EST 2009
Here I doubt that's the right kernel -- at least it was not built today.
Can you please double check this.
Regards,
Andreas
--
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 16:08 ` Andreas Herrmann
@ 2009-02-20 16:38 ` Andreas Herrmann
2009-02-20 17:09 ` Mark Hounschell
2009-02-20 17:06 ` Mark Hounschell
1 sibling, 1 reply; 59+ messages in thread
From: Andreas Herrmann @ 2009-02-20 16:38 UTC (permalink / raw)
To: Mark Hounschell
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
On Fri, Feb 20, 2009 at 05:08:43PM +0100, Andreas Herrmann wrote:
> On Fri, Feb 20, 2009 at 10:43:03AM -0500, Mark Hounschell wrote:
> > Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1
> > 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux)
> > ) #7 SMP PREEMPT Fri Feb 2 0 09:01:54 EST 2009
>
> Here I doubt that's the right kernel -- at least it was not built today.
> Can you please double check this.
Oops, your kernel was built today.
Have overlooked it as there was a newline between "2" and "0".
Sorry for the noise.
But still wondering where's the debug output. I've applied the patch
both to .29-rc5 and with some fuzziness to .28.4 and on my system the
output is visible (e.g. with dmesg). Ah, ... of course you need to use
"debug" kernel parameter as well. Otherwise the KERN_DEBUG messages
are not shown on the serial console.
Please, can you retry using "hpet=debug debug apic=debug".
Thanks.
Andreas
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 16:08 ` Andreas Herrmann
2009-02-20 16:38 ` Andreas Herrmann
@ 2009-02-20 17:06 ` Mark Hounschell
1 sibling, 0 replies; 59+ messages in thread
From: Mark Hounschell @ 2009-02-20 17:06 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
Andreas Herrmann wrote:
> On Fri, Feb 20, 2009 at 10:43:03AM -0500, Mark Hounschell wrote:
>> Andreas Herrmann wrote:
>>> On Thu, Feb 19, 2009 at 10:54:19AM -0500, Mark Hounschell wrote:
>>>> Borislav Petkov wrote:
>>>>> On Thu, Feb 19, 2009 at 10:16:40AM -0500, Mark Hounschell wrote:
>>>>>> Andreas Herrmann wrote:
>>>>>>> Hi Mark,
>>>>>>>
>>>>>>> Can you please provide us output of lspci -vvxxx.
>>>>>>> (Please run this as root.)
>>>>>>>
>>>> Attached...
>>>>
>>>>
>>>>>>> Furthermore you can try booting your 1000HZ kernel
>>>>>>> with following kernel command lines:
>>>>>>>
>>> Thanks for trying this out.
>>> But nothing suspicious found. I.e. timer/hpet interrupt is enabled
>>> and its routing seems to be ok.
>>>
>>> Here's one more check that's worth trying: In one of your logs I've
>>> seen that HPET id reports 3 timers but later on 4 timers were detected
>>> for HPET.
>>>
>>> To check what's going on I'd like to see the HPET configuration in the
>>> course of booting your system. Please apply attached patch and boot
>>> with hpet=debug -- both with 250HZ and with 1000HZ -- and provide dmesg
>>> output.
>>>
>>>
>> Here is the short 1000Hz bootlog. I'm afraid non of your debug output made it
>> out however.
>
> Sigh.
>
>> I thought it was because it just wasn't getting that far but
>> looking at the 250Hz log I don't see any there either???
>
>
>> The patch applied (with fuz) to both kernel sources and I built/installed them
>> from clean. I don't find any messages starting with "hpet:" in either trace???
>
> Your 250HZ kernel was built on Feb, 2nd, right?
> So the patch wasn't applied I guess, no?
>
The patch was applied. These 2 kernels were built from "clean" at the same time.
>> Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
>> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #7 SMP PREEMPT Fri Feb
>> 20 09:01:29 EST 2009
>
> I assume the patch was aplied.
>
Yes it was.
>> Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1
>> 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux)
>> ) #7 SMP PREEMPT Fri Feb 2 0 09:01:54 EST 2009
>
^
|
Look closer it was built Feb 20 09:01:53. Not Feb 2 0 09:01:53.
There is a space between the 2 and 0 because of a minicom linewrap I guess.
> Here I doubt that's the right kernel -- at least it was not built today.
> Can you please double check this.
>
My double check is correct. both these kernels were built this morning from
"clean" after your patch was applied.
I will do it all again from scratch if you wish.
Not a problem. I am at your disposal. I'm not ignorant when it comes to building
and installing kernels.
Standing by.
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 16:38 ` Andreas Herrmann
@ 2009-02-20 17:09 ` Mark Hounschell
2009-02-20 17:40 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-20 17:09 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
Andreas Herrmann wrote:
> On Fri, Feb 20, 2009 at 05:08:43PM +0100, Andreas Herrmann wrote:
>> On Fri, Feb 20, 2009 at 10:43:03AM -0500, Mark Hounschell wrote:
>>> Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1
>>> 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux)
>>> ) #7 SMP PREEMPT Fri Feb 2 0 09:01:54 EST 2009
>> Here I doubt that's the right kernel -- at least it was not built today.
>> Can you please double check this.
>
> Oops, your kernel was built today.
> Have overlooked it as there was a newline between "2" and "0".
> Sorry for the noise.
>
> But still wondering where's the debug output. I've applied the patch
> both to .29-rc5 and with some fuzziness to .28.4 and on my system the
> output is visible (e.g. with dmesg). Ah, ... of course you need to use
> "debug" kernel parameter as well. Otherwise the KERN_DEBUG messages
> are not shown on the serial console.
>
> Please, can you retry using "hpet=debug debug apic=debug".
> Thanks.
>
>
> Andreas
>
>
>
Ah yes, ok....
It will be forthcoming.
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 17:09 ` Mark Hounschell
@ 2009-02-20 17:40 ` Mark Hounschell
2009-02-20 18:22 ` Andreas Herrmann
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-20 17:40 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 8452 bytes --]
Mark Hounschell wrote:
> Andreas Herrmann wrote:
>> On Fri, Feb 20, 2009 at 05:08:43PM +0100, Andreas Herrmann wrote:
>>> On Fri, Feb 20, 2009 at 10:43:03AM -0500, Mark Hounschell wrote:
>>>> Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1
>>>> 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux)
>>>> ) #7 SMP PREEMPT Fri Feb 2 0 09:01:54 EST 2009
>>> Here I doubt that's the right kernel -- at least it was not built today.
>>> Can you please double check this.
>> Oops, your kernel was built today.
>> Have overlooked it as there was a newline between "2" and "0".
>> Sorry for the noise.
>>
>> But still wondering where's the debug output. I've applied the patch
>> both to .29-rc5 and with some fuzziness to .28.4 and on my system the
>> output is visible (e.g. with dmesg). Ah, ... of course you need to use
>> "debug" kernel parameter as well. Otherwise the KERN_DEBUG messages
>> are not shown on the serial console.
>>
>> Please, can you retry using "hpet=debug debug apic=debug".
>> Thanks.
>>
>>
>> Andreas
>>
Here is the 1000Hz
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #9 SMP PREEMPT Fri Feb
20 12:14:07 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 32ffe000 @ 10000-16000
RAMDISK: 374d0000 - 37fefeed
Allocated new RAMDISK: 004a7000 - 00fc6eed
Move RAMDISK from 00000000374d0000 - 0000000037fefeec to 004a7000 - 00fc6eec
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
2255MB HIGHMEM available.
815MB LOWMEM available.
mapped low ram: 0 - 32ffe000
low ram: 00000000 - 32ffe000
bootmap 00012000 - 00018600
(9 early reservations) ==> bootmem [0000000000 - 0032ffe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc6eed] NEW RAMDISK ==> [00004a7000 - 0000fc6eed]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00032ffe
HighMem 0x00032ffe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
On node 0 totalpages: 786287
free_area_init_node: node 0, pgdat c03a5900, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1600 pages used for memmap
Normal zone: 203198 pages, LIFO batch:31
HighMem zone: 4512 pages used for memmap
HighMem zone: 572994 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
hpet=debug debug apic=debug apm=off selinux=0 noresume splash=silent vmalloc=192M
vga=0x317 console=ttyS0,115200n8
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3000.331 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103636k/3145600k available (1836k kernel code, 40720k reserved, 1098k
data, 276k init, 2310024k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf37fe000 - 0xff7fe000 ( 192 MB)
lowmem : 0xc0000000 - 0xf2ffe000 ( 815 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02cb187 - 0xc03ddc4c (1098 kB)
.text : 0xc0100000 - 0xc02cb187 (1836 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet: hpet_enable(834):
hpet: ID: 43538301, PERIOD: 429b17e
hpet: CFG: 0, STATUS: 0
hpet: COUNTER_l: 0, COUNTER_h: 0
hpet: T0_CFG_l: 10, T0_CFG_h: c0ffff
hpet: T0_CMP_l: ffffffff, T0_CMP_h: 0
hpet: T0_ROUTE_l: 0, T0_ROUTE_h: 0
hpet: T1_CFG_l: 10, T1_CFG_h: c0ffff
hpet: T1_CMP_l: ffffffff, T1_CMP_h: 0
hpet: T1_ROUTE_l: 0, T1_ROUTE_h: 0
hpet: T2_CFG_l: 10, T2_CFG_h: c0ffff
hpet: T2_CMP_l: ffffffff, T2_CMP_h: 0
hpet: T2_ROUTE_l: 0, T2_ROUTE_h: 0
hpet: hpet_set_mode(304):
hpet: ID: 43538301, PERIOD: 429b17e
hpet: CFG: 3, STATUS: 0
hpet: COUNTER_l: 1b7db, COUNTER_h: 0
hpet: T0_CFG_l: 10, T0_CFG_h: c0ffff
hpet: T0_CMP_l: ffffffff, T0_CMP_h: 0
hpet: T0_ROUTE_l: 0, T0_ROUTE_h: 0
hpet: T1_CFG_l: 10, T1_CFG_h: c0ffff
hpet: T1_CMP_l: ffffffff, T1_CMP_h: 0
hpet: T1_ROUTE_l: 0, T1_ROUTE_h: 0
hpet: T2_CFG_l: 10, T2_CFG_h: c0ffff
hpet: T2_CMP_l: ffffffff, T2_CMP_h: 0
hpet: T2_ROUTE_l: 0, T2_ROUTE_h: 0
hpet: hpet_se
The 250Hz is attached
Regards
Mark
[-- Attachment #2: d.bootlog-250Hz.txt --]
[-- Type: text/plain, Size: 62031 bytes --]
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #9 SMP PREEMPT Fri Feb 2
0 12:11:43 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 32ffe000 @ 10000-16000
RAMDISK: 374cf000 - 37fef035
Allocated new RAMDISK: 004a7000 - 00fc7035
Move RAMDISK from 00000000374cf000 - 0000000037fef034 to 004a7000 - 00fc7034
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
2255MB HIGHMEM available.
815MB LOWMEM available.
mapped low ram: 0 - 32ffe000
low ram: 00000000 - 32ffe000
bootmap 00012000 - 00018600
(9 early reservations) ==> bootmem [0000000000 - 0032ffe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc7035] NEW RAMDISK ==> [00004a7000 - 0000fc7035]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00032ffe
HighMem 0x00032ffe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
On node 0 totalpages: 786287
free_area_init_node: node 0, pgdat c03a5900, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1600 pages used for memmap
Normal zone: 203198 pages, LIFO batch:31
HighMem zone: 4512 pages used for memmap
HighMem zone: 572994 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 hpet=debug debug apic=debug apm=off selinux=0 noresume splash=silent vmalloc=192M
vga=0x317 console=ttyS0,115200n8
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 3000.201 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103632k/3145600k available (1836k kernel code, 40724k reserved, 1098k data, 276k init, 2310024k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf37fe000 - 0xff7fe000 ( 192 MB)
lowmem : 0xc0000000 - 0xf2ffe000 ( 815 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02cb157 - 0xc03ddc4c (1098 kB)
.text : 0xc0100000 - 0xc02cb157 (1836 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet: hpet_enable(834):
hpet: ID: 43538301, PERIOD: 429b17e
hpet: CFG: 0, STATUS: 0
hpet: COUNTER_l: 1, COUNTER_h: 0
hpet: T0_CFG_l: 10, T0_CFG_h: c0ffff
hpet: T0_CMP_l: ffffffff, T0_CMP_h: 0
hpet: T0_ROUTE_l: 0, T0_ROUTE_h: 0
hpet: T1_CFG_l: 10, T1_CFG_h: c0ffff
hpet: T1_CMP_l: ffffffff, T1_CMP_h: 0
hpet: T1_ROUTE_l: 0, T1_ROUTE_h: 0
hpet: T2_CFG_l: 10, T2_CFG_h: c0ffff
hpet: T2_CMP_l: ffffffff, T2_CMP_h: 0
hpet: T2_ROUTE_l: 0, T2_ROUTE_h: 0
hpet: hpet_set_mode(304):
hpet: ID: 43538301, PERIOD: 429b17e
hpet: CFG: 3, STATUS: 0
hpet: COUNTER_l: 1b7c8, COUNTER_h: 0
hpet: T0_CFG_l: 10, T0_CFG_h: c0ffff
hpet: T0_CMP_l: ffffffff, T0_CMP_h: 0
hpet: T0_ROUTE_l: 0, T0_ROUTE_h: 0
hpet: T1_CFG_l: 10, T1_CFG_h: c0ffff
hpet: T1_CMP_l: ffffffff, T1_CMP_h: 0
hpet: T1_ROUTE_l: 0, T1_ROUTE_h: 0
hpet: T2_CFG_l: 10, T2_CFG_h: c0ffff
hpet: T2_CMP_l: ffffffff, T2_CMP_h: 0
hpet: T2_ROUTE_l: 0, T2_ROUTE_h: 0
hpet: hpet_set_mode(322):
hpet: ID: 43538301, PERIOD: 429b17e
hpet: CFG: 3, STATUS: 1
hpet: COUNTER_l: b2459, COUNTER_h: 0
hpet: T0_CFG_l: 1c, T0_CFG_h: c0ffff
hpet: T0_CMP_l: d46e2, T0_CMP_h: 0
hpet: T0_ROUTE_l: 0, T0_ROUTE_h: 0
hpet: T1_CFG_l: 10, T1_CFG_h: c0ffff
hpet: T1_CMP_l: ffffffff, T1_CMP_h: 0
hpet: T1_ROUTE_l: 0, T1_ROUTE_h: 0
hpet: T2_CFG_l: 10, T2_CFG_h: c0ffff
hpet: T2_CMP_l: ffffffff, T2_CMP_h: 0
hpet: T2_ROUTE_l: 0, T2_ROUTE_h: 0
hpet clockevent registered
hpet: hpet_msi_capability_lookup(567):
hpet: ID: 43538301, PERIOD: 429b17e
hpet: CFG: 3, STATUS: 1
hpet: COUNTER_l: 19e7cd, COUNTER_h: 0
hpet: T0_CFG_l: 1c, T0_CFG_h: c0ffff
hpet: T0_CMP_l: 1c221a, T0_CMP_h: 0
hpet: T0_ROUTE_l: 0, T0_ROUTE_h: 0
hpet: T1_CFG_l: 10, T1_CFG_h: c0ffff
hpet: T1_CMP_l: ffffffff, T1_CMP_h: 0
hpet: T1_ROUTE_l: 0, T1_ROUTE_h: 0
hpet: T2_CFG_l: 10, T2_CFG_h: c0ffff
hpet: T2_CMP_l: ffffffff, T2_CMP_h: 0
hpet: T2_ROUTE_l: 0, T2_ROUTE_h: 0
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.40 BogoMIPS (lpj=12000804)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
4-0 (apicid-pin) not connected
IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-9 -> 0x39 -> IRQ 9 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (4-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 (apicid-pin) not connected
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1250071
... PM timer delta = 357949
... PM timer result ok
..... delta 1250071
..... mult: 53686785
..... calibration result: 800045
..... CPU clock speed is 3000.0672 MHz.
..... host bus clock speed is 200.0045 MHz.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 6000.40 BogoMIPS (lpj=12000811)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
masked ExtINT on CPU#2
Calibrating delay using timer specific routine.. 6000.39 BogoMIPS (lpj=12000795)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
masked ExtINT on CPU#3
Calibrating delay using timer specific routine.. 6000.40 BogoMIPS (lpj=12000808)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (24001.60 BogoMIPS).
net_namespace: 776 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07]
pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03]
pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07]
pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03]
pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f]
pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
pci 0000:00:13.3: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
pci 0000:00:13.4: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
pci 0000:00:13.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfdce0000-0xfdcfffff]
pci 0000:02:00.0: reg 14 32bit mmio: [0xfdcc0000-0xfdcdffff]
pci 0000:02:00.0: reg 18 io port: [0xcf00-0xcf1f]
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:04.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:00:04.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
pci 0000:03:00.0: reg 24 32bit mmio: [0xfdafe000-0xfdafffff]
pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10 io port: [0xbf00-0xbf07]
pci 0000:03:00.1: reg 14 io port: [0xbe00-0xbe03]
pci 0000:03:00.1: reg 18 io port: [0xbd00-0xbd07]
pci 0000:03:00.1: reg 1c io port: [0xbc00-0xbc03]
pci 0000:03:00.1: reg 20 io port: [0xbb00-0xbb0f]
pci 0000:00:06.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:06.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
pci 0000:00:06.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfdefc000-0xfdefffff]
pci 0000:04:00.0: reg 18 io port: [0xee00-0xeeff]
pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:07.0: bridge io port: [0xe000-0xefff]
pci 0000:00:07.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
pci 0000:05:05.0: reg 10 io port: [0xaf00-0xaf3f]
pci 0000:05:05.0: reg 14 32bit mmio: [0xfd9ff000-0xfd9fffff]
pci 0000:05:06.0: reg 10 io port: [0xac00-0xacff]
pci 0000:05:06.0: reg 14 32bit mmio: [0xfd9fe000-0xfd9fefff]
pci 0000:05:06.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:05:07.0: reg 10 io port: [0xae00-0xae3f]
pci 0000:05:07.0: reg 14 32bit mmio: [0xfd9fd000-0xfd9fdfff]
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
pci 0000:00:14.4: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
pci 0000:00:14.4: bridge 32bit mmio pref: [0xfd800000-0xfd8fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
printing PIC contents
... PIC IMR: ffff
... PIC IRR: 0001
... PIC ISR: 0000
... PIC ELCR: 0c28
printing local APIC contents on CPU#0/0:
... APIC ID: 00000000 (0)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 01000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000208fc
... APIC ICR2: 02000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00000400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000c352
... APIC TMCCT: 0000815d
... APIC TDCR: 00000003
printing local APIC contents on CPU#1/1:
... APIC ID: 01000000 (1)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 02000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000008fc
... APIC ICR2: 01000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000c352
... APIC TMCCT: 0000a565
... APIC TDCR: 00000003
printing local APIC contents on CPU#2/2:
... APIC ID: 02000000 (2)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 04000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000008fc
... APIC ICR2: 02000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000c352
... APIC TMCCT: 0000813c
... APIC TDCR: 00000003
printing local APIC contents on CPU#3/3:
... APIC ID: 03000000 (3)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 08000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000008fc
... APIC ICR2: 02000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000c352
... APIC TMCCT: 00006036
... APIC TDCR: 00000003
number of MP IRQ sources: 15.
number of IO-APIC #4 registers: 24.
testing the IO APIC.......................
IO APIC #4......
.... register #00: 00000000
....... : physical APIC id: 00
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178021
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0021
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00
01 00F 0 0 0 0 0 1 1 31
02 0FF 0 0 0 0 0 1 1 30
03 00F 0 0 0 0 0 1 1 33
04 00F 0 0 0 0 0 1 1 34
05 00F 0 0 0 0 0 1 1 35
06 00F 0 0 0 0 0 1 1 36
07 00F 1 0 0 0 0 1 1 37
08 00F 0 0 0 0 0 1 1 38
09 00F 0 1 0 1 0 1 1 39
0a 00F 0 0 0 0 0 1 1 3A
0b 00F 0 0 0 0 0 1 1 3B
0c 00F 0 0 0 0 0 1 1 3C
0d 00F 0 0 0 0 0 1 1 3D
0e 00F 0 0 0 0 0 1 1 3E
0f 00F 0 0 0 0 0 1 1 3F
10 000 1 0 0 0 0 0 0 00
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 1 0 0 0 0 0 0 00
15 000 1 0 0 0 0 0 0 00
16 000 1 0 0 0 0 0 0 00
17 000 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
hpet: hpet_late_init(886):
hpet: ID: 43538301, PERIOD: 429b17e
hpet: CFG: 3, STATUS: 1
hpet: COUNTER_l: 245ba7f, COUNTER_h: 0
hpet: T0_CFG_l: 18, T0_CFG_h: c0ffff
hpet: T0_CMP_l: 247ef3a, T0_CMP_h: 0
hpet: T0_ROUTE_l: 0, T0_ROUTE_h: 0
hpet: T1_CFG_l: 10, T1_CFG_h: c0ffff
hpet: T1_CMP_l: ffffffff, T1_CMP_h: 0
hpet: T1_ROUTE_l: 0, T1_ROUTE_h: 0
hpet: T2_CFG_l: 10, T2_CFG_h: c0ffff
hpet: T2_CMP_l: 24401d9, T2_CMP_h: 0
hpet: T2_ROUTE_l: 0, T2_ROUTE_h: 0
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
pnp: PnP ACPI init
ACPI: bus type pnp registered
IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
pnp 00:0d: mem resource (0xf0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x1fffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x100000-0xbffdffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: ioport range 0x4100-0x411f has been reserved
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd0-0xcd1 has been reserved
system 00:01: ioport range 0xcd2-0xcd3 has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:01: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x220-0x225 has been reserved
system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved
system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0xd000-0xdfff
pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff
pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: 0xc000-0xcfff
pci 0000:00:04.0: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:04.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
pci 0000:00:06.0: IO window: 0xb000-0xbfff
pci 0000:00:06.0: MEM window: 0xfda00000-0xfdafffff
pci 0000:00:06.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: 0xe000-0xefff
pci 0000:00:07.0: MEM window: 0xfde00000-0xfdefffff
pci 0000:00:07.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xfd900000-0xfd9fffff
pci 0000:00:14.4: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
IOAPIC[0]: Set routing entry (4-18 -> 0x49 -> IRQ 18 Mode:1 Active:1)
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
IOAPIC[0]: Set routing entry (4-16 -> 0x51 -> IRQ 16 Mode:1 Active:1)
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
IOAPIC[0]: Set routing entry (4-19 -> 0x59 -> IRQ 19 Mode:1 Active:1)
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
bus: 01 index 2 mmio: [0xc0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xc000-0xcfff]
bus: 02 index 1 mmio: [0xfdc00000-0xfdcfffff]
bus: 02 index 2 mmio: [0xfdb00000-0xfdbfffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xb000-0xbfff]
bus: 03 index 1 mmio: [0xfda00000-0xfdafffff]
bus: 03 index 2 mmio: [0xfdf00000-0xfdffffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0xe000-0xefff]
bus: 04 index 1 mmio: [0xfde00000-0xfdefffff]
bus: 04 index 2 mmio: [0xfdd00000-0xfddfffff]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 io port: [0xa000-0xafff]
bus: 05 index 1 mmio: [0xfd900000-0xfd9fffff]
bus: 05 index 2 mmio: [0xfd800000-0xfd8fffff]
bus: 05 index 3 io port: [0x00-0xffff]
bus: 05 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 11392k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1235132930.640:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1573
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pcieport-driver 0000:00:02.0: irq 1279 for MSI/MSI-X
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: found MSI capability
pcieport-driver 0000:00:04.0: irq 1278 for MSI/MSI-X
pci_express 0000:00:04.0:pcie00: allocate port service
pci_express 0000:00:04.0:pcie03: allocate port service
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: found MSI capability
pcieport-driver 0000:00:06.0: irq 1277 for MSI/MSI-X
pci_express 0000:00:06.0:pcie00: allocate port service
pci_express 0000:00:06.0:pcie03: allocate port service
pcieport-driver 0000:00:07.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: found MSI capability
pcieport-driver 0000:00:07.0: irq 1276 for MSI/MSI-X
pci_express 0000:00:07.0:pcie00: allocate port service
pci_express 0000:00:07.0:pcie03: allocate port service
vesafb: framebuffer at 0xf9000000, mapped to 0xf3880000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:b0a0
vesafb: pmi: set display start = c00cb103, set palette = c00cb15e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 276k freed
doing fast boot
Boot logging started on /dev/ttyS0(/dev/console) at Fri Feb 20 12:28:51 2009
FATAL: Module processor not founSCSI subsystem initialized
d.
FATAL: Module thermal not found.
libata version 3.00 loaded.
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
logips2pp: Detected unknown logitech mouse model 11
ahci 0000:00:12.0: version 3.0
IOAPIC[0]: Set routing entry (4-22 -> 0x81 -> IRQ 22 Mode:1 Active:1)
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata5: failed due to HW bug, retry pmp=0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907
Probing IDE interface ide0...
hda: ST3120023A, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
IOAPIC[0]: Set routing entry (4-21 -> 0x89 -> IRQ 21 Mode:1 Active:1)
aic7xxx 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
FATAL: Module fan not found.
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
sky2 driver version 1.22
sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 5
sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
Part Number: Yukon 88E8056
Engineering Level: Rev. 1.3
Manufacturer: Marvell
sky2 0000:04:00.0: irq 1275 for MSI/MSI-X
sky2 eth0: addr 00:e0:4d:7a:8c:ee
Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
preping 03-storage.sh
running 03-storage.sh
preping 04-udev.sh
running 04-udev.sh
Creating device nodes with udev
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
sd 2:0:0:0: [sda] Write Protect is off
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28.3-250Hz ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ohci_hcd 0000:00:13.0: OHCI Host Controller
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5<6>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
sda6<6>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
sda7 sda8 sda9 sda10 >
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
IOAPIC[0]: Set routing entry (4-17 -> 0x99 -> IRQ 17 Mode:1 Active:1)
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sd 3:0:0:0: [sdb] Write Protect is off
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:<6>usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
sdb1 sdb2 sdb3 <<6>usb usb3: Product: OHCI Host Controller
sdb5<6>usb usb3: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
sdb6<6>usb usb3: SerialNumber: 0000:00:13.1
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
usb 1-1: new high speed USB device using ehci_hcd and address 2
sdb7<6>ohci_hcd 0000:00:13.2: OHCI Host Controller
sdb8<6>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
sdb9 sdb10 >
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=03f0, idProduct=5111
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Photosmart 3200 series
usb 1-1: Manufacturer: HP
usb 1-1: SerialNumber: MY5B98310Z045K
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.28.3-250Hz ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 2-2: new full speed USB device using ohci_hcd and address 2
preping 05-blogd.sh
running 05-blogd.sh
preping 11-block.sh
running 11-block.sh
preping 11-usb.sh
running 11-usb.sh
preping 21-devinit_done.sh
usb 2-2: device descriptor read/64, error -62
preping 81-kdump.sh
running 81-kdump.sh
preping 82-resume.userspace.sh
running 82-resume.userspace.sh
preping 83-resume.kernel.sh
running 83-resume.kernel.sh
preping 84-mount.sh
running 84-mount.sh
Waiting for device /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 to appear: ok
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
fsck 1.40.8 (13-Mar-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5: recovering journal
usb 2-2: device descriptor read/64, error -62
usb 2-2: new full speed USB device using ohci_hcd and address 3
usb 2-2: device descriptor read/64, error -62
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5: clean, 346628/3280320 files, 4787265/6554512 blocks
fsck succeeded. Mounting root device read-write.kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Mounting root /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
preping 85-remount.sh
running 85-remount.sh
preping 91-createfb.sh
running 91-crusb 2-2: device descriptor read/64, error -62
eatefb.sh
preping 91-killblogd.sh
running 91-killblogd.sh
preping 91-killudev.sh
running 91-killudev.sh
preping 91-shell.sh
running 91-shell.sh
preping 92-killblogd2.sh
running 92-killblogd2.sh
usb 2-2: new full speed USB device using ohci_hcd and address 4
preping 93-boot.sh
running 93-boot.sh
usb 2-2: device not accepting address 4, error -62
usb 2-2: new full speed USB device using ohci_hcd and address 5
INIT: version 2.86 booting
usb 2-2: device not accepting address 5, error -62
hub 2-0:1.0: unable to enumerate USB device on port 2
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Mounting debugfs at /sys/kernel/debug done
Initializing /dev done
Mounting devpts at /dev/pts done
done
Starting udevd: sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:02:00.0: setting latency timer to 64
e1000e 0000:02:00.0: irq 1274 for MSI/MSI-X
0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:02:00.0: eth1: MAC: 1, PHY: 4, PBA No: d50854-003
Linux agpgart interface v0.103
ide-cd driver 5.00
ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: waiting for device to settle before scanning
usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
usbcore: registered new interface driver usblp
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3055: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3059: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3063: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3064: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3072: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
done
Loading required kernel modules done
Activating swap-devices in /etc/fstab...
Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:83939done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
mount: according to mtab, /dev/sda5 is already mounted on /
Setting up the hardware clock done
Activating device mapper...
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
done
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part1
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part1: clean, 133/131616 files, 90643/263056 blocks
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part6
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part6: clean, 84123/5903072 files, 1456103/11797726 blocks
[/sbin/fsck.ext3 (1) -- /misc] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part7
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part7: clean, 10/8536064 files, 313923/17040940 blocks
[/sbin/fsck.ext3 (1) -- /usr/local] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part8
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part8: clean, 10111/656000 files, 562964/1311297 blocks
[/sbin/fsck.ext3 (1) -- /usr/src] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part9
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part9: clean, 988859/6557152 files, 10060870/13109032 blocks
[/sbin/fsck.ext3 (1) -- /misc1] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part10
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part10: clean, 13/12992512 files, 455787/25967056 blocks
[/sbin/fsck.ext3 (1) -- /local] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDWN-part1
/dev/disk/by-id/ata-ST3320620AS_6QF4HDWN-part1: clean, 1673848/39075840 files, 21295684/78142160 blocks
[/sbin/fsck.ext3 (1) -- /lcrs] fsck.ext3 -a /dev/disk/by-id/ata-ST3120023A_3KA0P431-part1
/dev/disk/by-id/ata-ST3120023A_3KA0P431-part1: clean, 32325/14663680 fdone, 24187969/29302552 blocks
done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
loop: module loaded
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda1 on /boot type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda6 on /home type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda7 on /misc type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda8 on /usr/local type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda9 on /usr/src type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda10 on /misc1 type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sdc1 on /local type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/hda1 on /lcrs type ext3 (rw,acl,user_xattr) done
Retry device configuration: done
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports done
fuse init (API version 7.10)
Loading fuse module done
Mounting fuse control filesystem done
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Mounting securityfs on /sys/kernel/security done
ls: cannot access /sys/module/apparmor: No such file or directory
ls: cannot access /sys/module/apparmor: No such file or directory
Loading AppArmor module failed
Enabling syn flood protection done
Disabling IP forwarding done
done
Activating remaining swap-devices in /etc/fstab... done
Creating /var/log/boot.msg done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: [sdd] Attached SCSI removable disk
sd 9:0:0:0: Attached scsi generic sg3 type 0
Setting up hostname 'harley' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
System Boot Control: The system has been set up
Failed features: boot.apparmor
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
Linking /usr/src/linix to /usr/src/linux-2.6.28.3-250Hz
No rtom kernel driver found in /lib/modules/2.6.28.3-250Hz/misc
kernel.shmmax = 81943040 done
INIT: Entering runlevel: 5
Boot logging started on /dev/ttyS0(/dev/console) at Fri Feb 20 12:29:17 2009
Master Resource Control: previous runlevel: N, switching to runlevel: 5
mkdir: cannot create directory `/dev/cpuset': File exists
mount: cpuset already mounted or /dev/cpuset busy
mount: according to mtab, cpuset is already mounted on /dev/cpuset
Initializing random number generator done
Starting resource manager done
acpid: starting up
Starting acpid done
acpid: 1 rule loaded
Starting D-Bus daemonStarting syslog services done
done
Starting ConsoleKit done
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemonip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Starting Firewall Initialization (phase 1 of 2) done
done
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8 done
eth0 device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 13)
eth0 IP address: 10.10.10.100/24 done
eth1 device: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
eth1 IP address: 192.168.10.100/24 done
Waiting for mandatory devices: eth2 eth3 __NSC__
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
eth2 No interface found failed
eth3 No interface found failed
Setting up service network . . . . . . . . . . . . . . failed
Starting service kdm done
Mount CIFS File Systems unused
VMware Server is installed, but it has not been (correctly) configured
for the running kernel. To (re-)configure it, invoke the
following command: /usr/bin/vmware-config.pl.
Starting RPC portmap daemon done
Loading Module rfm2g.
=========================================================
COPYRIGHT NOTICE
Copyright (C) 2002, 2004 GE Fanuc Embedded Systems, Inc.
International Copyright Secured. All Rights Reserved.
=========================================================
cat: /proc/rfm2g: No such file or directory
/etc/init.d/rfm2g_init: line 84: [: 0: unary operator expected
chmod: cannot access `/dev/rfm2g[0-4]': No such file or directory
failed
Starting auditd done
Starting cupsd done
Starting SSH daemon done
Starting Avahi daemon. done
Starting Avahi DNS Configuration daemon done
Initializing gpib boards
FATAL: Module tnt4882 not found.
failed to open device file '/dev/gpib0'
main: No such file or directory
failed to open device file '/dev/gpib1'
main: No such file or directory
failed
Loading keymap i386/qwerty/us.map.gz done
Clearing PCIRMS Sram Memory
prm_clear_sram: prm_mmap_open failed: No such device
PCIRMS Board 0 SRAM Cleared with option local
done
Loading compose table latin1.add done
Start Unicode mode done
Loading console font lat9w-16.psfu -m trivial G0:loadable done
ntpd: time set +0.301592s
Starting network time protocol daemon (NTPD) done
Starting Name Service Cache Daemon done
Starting mail service (Postfix) done
Starting CRON daemon done
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network vmware gpib rfm2g_init
Skipped services in runlevel 5: smbfs prm prm_dmatest prm_healthy splash
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 17:40 ` Mark Hounschell
@ 2009-02-20 18:22 ` Andreas Herrmann
2009-02-20 18:28 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Andreas Herrmann @ 2009-02-20 18:22 UTC (permalink / raw)
To: Mark Hounschell
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
On Fri, Feb 20, 2009 at 12:40:31PM -0500, Mark Hounschell wrote:
> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
<snip>
> hpet: hpet_enable(834):
> hpet: ID: 43538301, PERIOD: 429b17e
This means that your BIOS could be bogus.
Obviously ACPI HPET table contains different information about
your HPET configuration than the HPET registers are showing.
This means that other chipset configuration (e.g. ACPI tables) could
also be wrong.
To confirm this please provide us output of
# xxd /sys/firmware/acpi/tables/HPET
Andreas
--
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 18:22 ` Andreas Herrmann
@ 2009-02-20 18:28 ` Mark Hounschell
2009-02-20 19:54 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-20 18:28 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
Andreas Herrmann wrote:
> On Fri, Feb 20, 2009 at 12:40:31PM -0500, Mark Hounschell wrote:
>
>> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>
> <snip>
>
>> hpet: hpet_enable(834):
>> hpet: ID: 43538301, PERIOD: 429b17e
>
>
> This means that your BIOS could be bogus.
> Obviously ACPI HPET table contains different information about
> your HPET configuration than the HPET registers are showing.
>
> This means that other chipset configuration (e.g. ACPI tables) could
> also be wrong.
>
> To confirm this please provide us output of
>
> # xxd /sys/firmware/acpi/tables/HPET
markh@harley:~> xxd /sys/firmware/acpi/tables/HPET
0000000: 4850 4554 3800 0000 0101 5258 3738 3020 HPET8.....RX780
0000010: 4157 5244 4143 5049 312e 3042 4157 5244 AWRDACPI1.0BAWRD
0000020: 9800 0000 01a2 b910 0000 0000 0000 d0fe ................
0000030: 0000 0000 0010 0000
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 18:28 ` Mark Hounschell
@ 2009-02-20 19:54 ` Mark Hounschell
2009-02-20 20:27 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-20 19:54 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
Mark Hounschell wrote:
> Andreas Herrmann wrote:
>> On Fri, Feb 20, 2009 at 12:40:31PM -0500, Mark Hounschell wrote:
>>
>>> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>> <snip>
>>
>>> hpet: hpet_enable(834):
>>> hpet: ID: 43538301, PERIOD: 429b17e
>>
>> This means that your BIOS could be bogus.
>> Obviously ACPI HPET table contains different information about
>> your HPET configuration than the HPET registers are showing.
>>
>> This means that other chipset configuration (e.g. ACPI tables) could
>> also be wrong.
>>
>> To confirm this please provide us output of
>>
>> # xxd /sys/firmware/acpi/tables/HPET
>
> markh@harley:~> xxd /sys/firmware/acpi/tables/HPET
> 0000000: 4850 4554 3800 0000 0101 5258 3738 3020 HPET8.....RX780
> 0000010: 4157 5244 4143 5049 312e 3042 4157 5244 AWRDACPI1.0BAWRD
> 0000020: 9800 0000 01a2 b910 0000 0000 0000 d0fe ................
> 0000030: 0000 0000 0010 0000
>
> Mark
>
I don't intend to sound stupid but isn't this a _read only_ HPET ID register,
read by the BIOS and put in a table which ends up being read by the kernel then
in turn put in /sys/firmware/acpi/tables/HPET? If it is correct there, doesn't
that mean the BIOS read it correctly and it is correct? And in turn, mean that
the function used to read it for your debug printk could just be reading it wrong?
Also remember in the beginning of this thread this machine was running on a
Phenom-I and when I put a Phenom II in it I could no longer boot a 1000Hz
kernel. I know, that often means nothing. But not always???
I still have that original Phenom available and it is in another very similar
BIOSTAR motherboard TA770 A2+ SE and is running a 1000Hz kernel. The MB does
have a different BIOS mfgr however. Would it be of any benefit to do any of
these things on that machine?
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 19:54 ` Mark Hounschell
@ 2009-02-20 20:27 ` Mark Hounschell
2009-02-20 22:28 ` Andreas Herrmann
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-20 20:27 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
Mark Hounschell wrote:
> Mark Hounschell wrote:
>> Andreas Herrmann wrote:
>>> On Fri, Feb 20, 2009 at 12:40:31PM -0500, Mark Hounschell wrote:
>>>
>>>> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>>> <snip>
>>>
>>>> hpet: hpet_enable(834):
>>>> hpet: ID: 43538301, PERIOD: 429b17e
>>> This means that your BIOS could be bogus.
>>> Obviously ACPI HPET table contains different information about
>>> your HPET configuration than the HPET registers are showing.
>>>
>>> This means that other chipset configuration (e.g. ACPI tables) could
>>> also be wrong.
>>>
>>> To confirm this please provide us output of
>>>
>>> # xxd /sys/firmware/acpi/tables/HPET
>> markh@harley:~> xxd /sys/firmware/acpi/tables/HPET
>> 0000000: 4850 4554 3800 0000 0101 5258 3738 3020 HPET8.....RX780
>> 0000010: 4157 5244 4143 5049 312e 3042 4157 5244 AWRDACPI1.0BAWRD
>> 0000020: 9800 0000 01a2 b910 0000 0000 0000 d0fe ................
>> 0000030: 0000 0000 0010 0000
>>
>> Mark
>>
>
> I don't intend to sound stupid but isn't this a _read only_ HPET ID register,
> read by the BIOS and put in a table which ends up being read by the kernel then
> in turn put in /sys/firmware/acpi/tables/HPET? If it is correct there, doesn't
> that mean the BIOS read it correctly and it is correct? And in turn, mean that
> the function used to read it for your debug printk could just be reading it wrong?
>
> Also remember in the beginning of this thread this machine was running on a
> Phenom-I and when I put a Phenom II in it I could no longer boot a 1000Hz
> kernel. I know, that often means nothing. But not always???
>
> I still have that original Phenom available and it is in another very similar
> BIOSTAR motherboard TA770 A2+ SE and is running a 1000Hz kernel. The MB does
> have a different BIOS mfgr however. Would it be of any benefit to do any of
> these things on that machine?
>
>
Ok I sounded stupid anyway. Its the ACPI: HPET id: 0x10b9a201 base: 0xfed00000
that is incorrect? I'll be quiet and wait.
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 12:34 ` Ingo Molnar
@ 2009-02-20 21:51 ` Andreas Herrmann
0 siblings, 0 replies; 59+ messages in thread
From: Andreas Herrmann @ 2009-02-20 21:51 UTC (permalink / raw)
To: Ingo Molnar
Cc: Mark Hounschell, Borislav Petkov, Mark Hounschell, john stultz,
linux-kernel, Thomas Gleixner
On Fri, Feb 20, 2009 at 01:34:02PM +0100, Ingo Molnar wrote:
>
> * Andreas Herrmann <andreas.herrmann3@amd.com> wrote:
>
> > On Thu, Feb 19, 2009 at 10:54:19AM -0500, Mark Hounschell wrote:
> > > Borislav Petkov wrote:
> > > > On Thu, Feb 19, 2009 at 10:16:40AM -0500, Mark Hounschell wrote:
> > > >> Andreas Herrmann wrote:
> > > >>> Hi Mark,
> > > >>>
> > > >>> Can you please provide us output of lspci -vvxxx.
> > > >>> (Please run this as root.)
> > > >>>
> > >
> > > Attached...
> > >
> > >
> > > >>> Furthermore you can try booting your 1000HZ kernel
> > > >>> with following kernel command lines:
> > > >>>
> >
> > Thanks for trying this out.
> > But nothing suspicious found. I.e. timer/hpet interrupt is enabled
> > and its routing seems to be ok.
> >
> > Here's one more check that's worth trying: In one of your logs I've
> > seen that HPET id reports 3 timers but later on 4 timers were detected
> > for HPET.
> >
> > To check what's going on I'd like to see the HPET
> > configuration in the course of booting your system. Please
> > apply attached patch and boot with hpet=debug -- both with
> > 250HZ and with 1000HZ -- and provide dmesg output.
>
> Mind sending this patch as a hpet=verbose feature patch which we
> could queue up for upstream merging? We have hpet problems
> frequently, so some built-in debug/verbosity trigger would be
> nice.
Yup, work is in progress.
Andreas
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 20:27 ` Mark Hounschell
@ 2009-02-20 22:28 ` Andreas Herrmann
2009-02-21 1:14 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Andreas Herrmann @ 2009-02-20 22:28 UTC (permalink / raw)
To: Mark Hounschell
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 767 bytes --]
Mark,
Here we go ...
Attached is a compound version against v2.6.28.4 of some
hpet patches that I'd like to submit asap.
Can you please apply this patch and test it on your machine.
By chance I've found a machine wich also hangs with HZ_1000.
And this patch fixes the problem on this machine.
Regards,
Andreas
PS: Please boot with "hpet=verbose" to show the HPET registers
(no additional debug parameter needed this time).
--
Operating | Advanced Micro Devices GmbH
System | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
Research | Geschäftsführer: Jochen Polster, Thomas M. McCoy, Giuliano Meroni
Center | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
(OSRC) | Registergericht München, HRB Nr. 43632
[-- Attachment #2: hpet-cmpound-patch.diff --]
[-- Type: text/plain, Size: 6033 bytes --]
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c9115c1..a6a4134 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -485,10 +485,12 @@ and is between 256 and 4096 characters. It is defined in the file
Default: 64
hpet= [X86-32,HPET] option to control HPET usage
- Format: { enable (default) | disable | force }
+ Format: { enable (default) | disable | force |
+ verbose }
disable: disable HPET and use PIT instead
force: allow force enabled of undocumented chips (ICH4,
VIA, nVidia)
+ verbose: show contents of HPET registers during setup
com20020= [HW,NET] ARCnet - COM20020 chipset
Format:
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 067d8de..85366b2 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -78,6 +78,7 @@ static inline void hpet_clear_mapping(void)
*/
static int boot_hpet_disable;
int hpet_force_user;
+static int hpet_verbose;
static int __init hpet_setup(char *str)
{
@@ -86,6 +87,8 @@ static int __init hpet_setup(char *str)
boot_hpet_disable = 1;
if (!strncmp("force", str, 5))
hpet_force_user = 1;
+ if (!strncmp("verbose", str, 7))
+ hpet_verbose = 1;
}
return 1;
}
@@ -117,6 +120,43 @@ int is_hpet_enabled(void)
}
EXPORT_SYMBOL_GPL(is_hpet_enabled);
+static void _hpet_print_config(const char *function, int line)
+{
+ u32 i, timers, l, h;
+ printk(KERN_INFO "hpet: %s(%d):\n", function, line);
+ l = hpet_readl(HPET_ID);
+ h = hpet_readl(HPET_PERIOD);
+ timers = ((l & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
+ printk(KERN_INFO "hpet: ID: 0x%x, PERIOD: 0x%x\n", l, h);
+ l = hpet_readl(HPET_CFG);
+ h = hpet_readl(HPET_STATUS);
+ printk(KERN_INFO "hpet: CFG: 0x%x, STATUS: 0x%x\n", l, h);
+ l = hpet_readl(HPET_COUNTER);
+ h = hpet_readl(HPET_COUNTER+4);
+ printk(KERN_INFO "hpet: COUNTER_l: 0x%x, COUNTER_h: 0x%x\n", l, h);
+
+ for (i = 0; i < timers; i++) {
+ l = hpet_readl(HPET_Tn_CFG(i));
+ h = hpet_readl(HPET_Tn_CFG(i)+4);
+ printk(KERN_INFO "hpet: T%d: CFG_l: 0x%x, CFG_h: 0x%x\n",
+ i, l, h);
+ l = hpet_readl(HPET_Tn_CMP(i));
+ h = hpet_readl(HPET_Tn_CMP(i)+4);
+ printk(KERN_INFO "hpet: T%d: CMP_l: 0x%x, CMP_h: 0x%x\n",
+ i, l, h);
+ l = hpet_readl(HPET_Tn_ROUTE(i));
+ h = hpet_readl(HPET_Tn_ROUTE(i)+4);
+ printk(KERN_INFO "hpet: T%d ROUTE_l: 0x%x, ROUTE_h: 0x%x\n",
+ i, l, h);
+ }
+}
+
+#define hpet_print_config() \
+do { \
+ if (hpet_verbose) \
+ _hpet_print_config(__FUNCTION__, __LINE__); \
+} while (0)
+
/*
* When the hpet driver (/dev/hpet) is enabled, we need to reserve
* timer 0 and timer 1 in case of RTC emulation.
@@ -189,27 +229,37 @@ static struct clock_event_device hpet_clockevent = {
.rating = 50,
};
-static void hpet_start_counter(void)
+static void hpet_stop_counter(void)
{
unsigned long cfg = hpet_readl(HPET_CFG);
-
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
+}
+
+static void hpet_start_counter(void)
+{
+ unsigned long cfg = hpet_readl(HPET_CFG);
cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
}
+static void hpet_restart_counter(void)
+{
+ hpet_stop_counter();
+ hpet_start_counter();
+}
+
static void hpet_resume_device(void)
{
force_hpet_resume();
}
-static void hpet_restart_counter(void)
+static void hpet_resume_counter(void)
{
hpet_resume_device();
- hpet_start_counter();
+ hpet_restart_counter();
}
static void hpet_enable_legacy_int(void)
@@ -257,27 +307,21 @@ static int hpet_setup_msi_irq(unsigned int irq);
static void hpet_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt, int timer)
{
- unsigned long cfg, cmp, now;
+ unsigned long cfg;
uint64_t delta;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
+ hpet_stop_counter();
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
delta >>= evt->shift;
- now = hpet_readl(HPET_COUNTER);
- cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
- /*
- * The first write after writing TN_SETVAL to the
- * config register sets the counter value, the second
- * write sets the period.
- */
- hpet_writel(cmp, HPET_Tn_CMP(timer));
- udelay(1);
hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
+ hpet_start_counter();
+ hpet_print_config();
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -304,6 +348,7 @@ static void hpet_set_mode(enum clock_event_mode mode,
irq_set_affinity(hdev->irq, cpumask_of_cpu(hdev->cpu));
enable_irq(hdev->irq);
}
+ hpet_print_config();
break;
}
}
@@ -522,6 +567,7 @@ static void hpet_msi_capability_lookup(unsigned int start_timer)
num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
num_timers++; /* Value read out starts from 0 */
+ hpet_print_config();
hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL);
if (!hpet_devs)
@@ -690,7 +736,7 @@ static struct clocksource clocksource_hpet = {
.mask = HPET_MASK,
.shift = HPET_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
- .resume = hpet_restart_counter,
+ .resume = hpet_resume_counter,
#ifdef CONFIG_X86_64
.vread = vread_hpet,
#endif
@@ -702,7 +748,7 @@ static int hpet_clocksource_register(void)
cycle_t t1;
/* Start the counter */
- hpet_start_counter();
+ hpet_restart_counter();
/* Verify whether hpet counter works */
t1 = read_hpet();
@@ -788,6 +834,7 @@ int __init hpet_enable(void)
* information and the number of channels
*/
id = hpet_readl(HPET_ID);
+ hpet_print_config();
#ifdef CONFIG_HPET_EMULATE_RTC
/*
@@ -839,6 +886,7 @@ static __init int hpet_late_init(void)
}
hpet_reserve_platform_timers(hpet_readl(HPET_ID));
+ hpet_print_config();
for_each_online_cpu(cpu) {
hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu);
^ permalink raw reply related [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-20 22:28 ` Andreas Herrmann
@ 2009-02-21 1:14 ` Mark Hounschell
2009-02-21 13:20 ` Mark Hounschell
0 siblings, 1 reply; 59+ messages in thread
From: Mark Hounschell @ 2009-02-21 1:14 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 568 bytes --]
Andreas Herrmann wrote:
> Mark,
>
> Here we go ...
>
> Attached is a compound version against v2.6.28.4 of some
> hpet patches that I'd like to submit asap.
>
> Can you please apply this patch and test it on your machine.
>
> By chance I've found a machine wich also hangs with HZ_1000.
> And this patch fixes the problem on this machine.
>
>
> Regards,
> Andreas
>
> PS: Please boot with "hpet=verbose" to show the HPET registers
> (no additional debug parameter needed this time).
>
>
Yep, that works here too. Attached is the bootlog FYI.
Regards
Mark
[-- Attachment #2: d.bootlog-1000Hz-good.txt --]
[-- Type: text/plain, Size: 61766 bytes --]
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #10 SMP PREEMPT Fri Feb
20 19:53:50 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 32ffe000 @ 10000-16000
RAMDISK: 374cf000 - 37fef1c2
Allocated new RAMDISK: 004a7000 - 00fc71c2
Move RAMDISK from 00000000374cf000 - 0000000037fef1c1 to 004a7000 - 00fc71c1
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
2255MB HIGHMEM available.
815MB LOWMEM available.
mapped low ram: 0 - 32ffe000
low ram: 00000000 - 32ffe000
bootmap 00012000 - 00018600
(9 early reservations) ==> bootmem [0000000000 - 0032ffe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc71c2] NEW RAMDISK ==> [00004a7000 - 0000fc71c2]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00032ffe
HighMem 0x00032ffe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
On node 0 totalpages: 786287
free_area_init_node: node 0, pgdat c03a5900, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1600 pages used for memmap
Normal zone: 203198 pages, LIFO batch:31
HighMem zone: 4512 pages used for memmap
HighMem zone: 572994 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 hpet=verbose debug apic=debug apm=off selinux=0 noresume splash=silent vmalloc=192
M vga=normal console=ttyS0,115200n8
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3000.111 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103504k/3145600k available (1836k kernel code, 40788k reserved, 1098k data, 276k init, 2310024k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf37fe000 - 0xff7fe000 ( 192 MB)
lowmem : 0xc0000000 - 0xf2ffe000 ( 815 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02cb0a7 - 0xc03ddc4c (1098 kB)
.text : 0xc0100000 - 0xc02cb0a7 (1836 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet: hpet_enable(837):
hpet: ID: 0x43538301, PERIOD: 0x429b17e
hpet: CFG: 0x0, STATUS: 0x0
hpet: COUNTER_l: 0x0, COUNTER_h: 0x0
hpet: T0: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T0: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T1: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T2: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T3: CFG_l: 0x0, CFG_h: 0x0
hpet: T3: CMP_l: 0x0, CMP_h: 0x0
hpet: T3 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: hpet_set_mode(324):
hpet: ID: 0x43538301, PERIOD: 0x429b17e
hpet: CFG: 0x3, STATUS: 0x1
hpet: COUNTER_l: 0x26346, COUNTER_h: 0x0
hpet: T0: CFG_l: 0x1c, CFG_h: 0xc0ffff
hpet: T0: CMP_l: 0x53e50, CMP_h: 0x0
hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T1: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T2: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T3: CFG_l: 0x0, CFG_h: 0x0
hpet: T3: CMP_l: 0x0, CMP_h: 0x0
hpet: T3 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet clockevent registered
hpet: hpet_msi_capability_lookup(570):
hpet: ID: 0x43538301, PERIOD: 0x429b17e
hpet: CFG: 0x3, STATUS: 0x1
hpet: COUNTER_l: 0x13cebd, COUNTER_h: 0x0
hpet: T0: CFG_l: 0x1c, CFG_h: 0xc0ffff
hpet: T0: CMP_l: 0x16b8b0, CMP_h: 0x0
hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T1: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T2: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T3: CFG_l: 0x0, CFG_h: 0x0
hpet: T3: CMP_l: 0x0, CMP_h: 0x0
hpet: T3 ROUTE_l: 0x0, ROUTE_h: 0x0
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.22 BogoMIPS (lpj=12000444)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
4-0 (apicid-pin) not connected
IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-9 -> 0x39 -> IRQ 9 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (4-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 (apicid-pin) not connected
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1250071
... PM timer delta = 357950
... PM timer result ok
..... delta 1250071
..... mult: 53686785
..... calibration result: 800045
..... CPU clock speed is 3000.0685 MHz.
..... host bus clock speed is 200.0045 MHz.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 6000.41 BogoMIPS (lpj=12000832)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
masked ExtINT on CPU#2
Calibrating delay using timer specific routine.. 6000.41 BogoMIPS (lpj=12000824)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
masked ExtINT on CPU#3
Calibrating delay using timer specific routine.. 6000.41 BogoMIPS (lpj=12000832)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) II X4 940 Processor stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (24001.46 BogoMIPS).
net_namespace: 776 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07]
pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03]
pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07]
pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03]
pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f]
pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
pci 0000:00:13.3: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
pci 0000:00:13.4: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
pci 0000:00:13.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfdbe0000-0xfdbfffff]
pci 0000:02:00.0: reg 14 32bit mmio: [0xfdbc0000-0xfdbdffff]
pci 0000:02:00.0: reg 18 io port: [0xcf00-0xcf1f]
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:04.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
pci 0000:00:04.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
pci 0000:03:00.0: reg 24 32bit mmio: [0xfdffe000-0xfdffffff]
pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10 io port: [0xbf00-0xbf07]
pci 0000:03:00.1: reg 14 io port: [0xbe00-0xbe03]
pci 0000:03:00.1: reg 18 io port: [0xbd00-0xbd07]
pci 0000:03:00.1: reg 1c io port: [0xbc00-0xbc03]
pci 0000:03:00.1: reg 20 io port: [0xbb00-0xbb0f]
pci 0000:00:06.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:06.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:00:06.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfddfc000-0xfddfffff]
pci 0000:04:00.0: reg 18 io port: [0xee00-0xeeff]
pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:07.0: bridge io port: [0xe000-0xefff]
pci 0000:00:07.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
pci 0000:05:05.0: reg 10 io port: [0xaf00-0xaf3f]
pci 0000:05:05.0: reg 14 32bit mmio: [0xfd9ff000-0xfd9fffff]
pci 0000:05:06.0: reg 10 io port: [0xac00-0xacff]
pci 0000:05:06.0: reg 14 32bit mmio: [0xfd9fe000-0xfd9fefff]
pci 0000:05:06.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:05:07.0: reg 10 io port: [0xae00-0xae3f]
pci 0000:05:07.0: reg 14 32bit mmio: [0xfd9fd000-0xfd9fdfff]
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
pci 0000:00:14.4: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
pci 0000:00:14.4: bridge 32bit mmio pref: [0xfd800000-0xfd8fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
printing PIC contents
... PIC IMR: ffff
... PIC IRR: 0001
... PIC ISR: 0000
... PIC ELCR: 0c28
printing local APIC contents on CPU#0/0:
... APIC ID: 00000000 (0)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 01000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000208fc
... APIC ICR2: 02000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00000400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000c352
... APIC TMCCT: 00005822
... APIC TDCR: 00000003
printing local APIC contents on CPU#1/1:
... APIC ID: 01000000 (1)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 02000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000008fc
... APIC ICR2: 01000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000c352
... APIC TMCCT: 000047ba
... APIC TDCR: 00000003
printing local APIC contents on CPU#2/2:
... APIC ID: 02000000 (2)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 04000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000008fc
... APIC ICR2: 02000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000c352
... APIC TMCCT: 0000af7e
... APIC TDCR: 00000003
printing local APIC contents on CPU#3/3:
... APIC ID: 03000000 (3)
... APIC VERSION: 80050010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 08000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC TMR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
... APIC IRR field:
0123456789abcdef0123456789abcdef
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000010000000000000000
... APIC ESR: 00000000
... APIC ICR: 000008fc
... APIC ICR2: 02000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00010400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000c352
... APIC TMCCT: 00005199
... APIC TDCR: 00000003
number of MP IRQ sources: 15.
number of IO-APIC #4 registers: 24.
testing the IO APIC.......................
IO APIC #4......
.... register #00: 00000000
....... : physical APIC id: 00
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178021
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0021
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00
01 00F 0 0 0 0 0 1 1 31
02 0FF 0 0 0 0 0 1 1 30
03 00F 0 0 0 0 0 1 1 33
04 00F 0 0 0 0 0 1 1 34
05 00F 0 0 0 0 0 1 1 35
06 00F 0 0 0 0 0 1 1 36
07 00F 1 0 0 0 0 1 1 37
08 00F 0 0 0 0 0 1 1 38
09 00F 0 1 0 1 0 1 1 39
0a 00F 0 0 0 0 0 1 1 3A
0b 00F 0 0 0 0 0 1 1 3B
0c 00F 0 0 0 0 0 1 1 3C
0d 00F 0 0 0 0 0 1 1 3D
0e 00F 0 0 0 0 0 1 1 3E
0f 00F 0 0 0 0 0 1 1 3F
10 000 1 0 0 0 0 0 0 00
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 1 0 0 0 0 0 0 00
15 000 1 0 0 0 0 0 0 00
16 000 1 0 0 0 0 0 0 00
17 000 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
hpet: hpet_late_init(889):
hpet: ID: 0x43538301, PERIOD: 0x429b17e
hpet: CFG: 0x3, STATUS: 0x1
hpet: COUNTER_l: 0x2416a67, COUNTER_h: 0x0
hpet: T0: CFG_l: 0x18, CFG_h: 0xc0ffff
hpet: T0: CMP_l: 0x2436588, CMP_h: 0x0
hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T1: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T2: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T2: CMP_l: 0x23f8b09, CMP_h: 0x0
hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T3: CFG_l: 0x0, CFG_h: 0x0
hpet: T3: CMP_l: 0x0, CMP_h: 0x0
hpet: T3 ROUTE_l: 0x0, ROUTE_h: 0x0
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #3
pnp: PnP ACPI init
ACPI: bus type pnp registered
IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
pnp 00:0d: mem resource (0xf0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x1fffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:0d: mem resource (0x100000-0xbffdffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: ioport range 0x4100-0x411f has been reserved
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd0-0xcd1 has been reserved
system 00:01: ioport range 0xcd2-0xcd3 has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:01: ioport range 0xb10-0xb1f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x220-0x225 has been reserved
system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved
system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0xd000-0xdfff
pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff
pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: 0xc000-0xcfff
pci 0000:00:04.0: MEM window: 0xfdb00000-0xfdbfffff
pci 0000:00:04.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
pci 0000:00:06.0: IO window: 0xb000-0xbfff
pci 0000:00:06.0: MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:06.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: 0xe000-0xefff
pci 0000:00:07.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:07.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xfd900000-0xfd9fffff
pci 0000:00:14.4: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
IOAPIC[0]: Set routing entry (4-18 -> 0x49 -> IRQ 18 Mode:1 Active:1)
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
IOAPIC[0]: Set routing entry (4-16 -> 0x51 -> IRQ 16 Mode:1 Active:1)
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
IOAPIC[0]: Set routing entry (4-19 -> 0x59 -> IRQ 19 Mode:1 Active:1)
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
bus: 01 index 2 mmio: [0xc0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xc000-0xcfff]
bus: 02 index 1 mmio: [0xfdb00000-0xfdbfffff]
bus: 02 index 2 mmio: [0xfda00000-0xfdafffff]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 io port: [0xb000-0xbfff]
bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff]
bus: 03 index 2 mmio: [0xfde00000-0xfdefffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 04 index 0 io port: [0xe000-0xefff]
bus: 04 index 1 mmio: [0xfdd00000-0xfddfffff]
bus: 04 index 2 mmio: [0xfdc00000-0xfdcfffff]
bus: 04 index 3 mmio: [0x0-0x0]
bus: 05 index 0 io port: [0xa000-0xafff]
bus: 05 index 1 mmio: [0xfd900000-0xfd9fffff]
bus: 05 index 2 mmio: [0xfd800000-0xfd8fffff]
bus: 05 index 3 io port: [0x00-0xffff]
bus: 05 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 11392k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1235160162.636:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1573
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pcieport-driver 0000:00:02.0: irq 1279 for MSI/MSI-X
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: found MSI capability
pcieport-driver 0000:00:04.0: irq 1278 for MSI/MSI-X
pci_express 0000:00:04.0:pcie00: allocate port service
pci_express 0000:00:04.0:pcie03: allocate port service
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: found MSI capability
pcieport-driver 0000:00:06.0: irq 1277 for MSI/MSI-X
pci_express 0000:00:06.0:pcie00: allocate port service
pci_express 0000:00:06.0:pcie03: allocate port service
pcieport-driver 0000:00:07.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: found MSI capability
pcieport-driver 0000:00:07.0: irq 1276 for MSI/MSI-X
pci_express 0000:00:07.0:pcie00: allocate port service
pci_express 0000:00:07.0:pcie03: allocate port service
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 276k freed
doing fast boot
Boot logging started on /dev/ttyS0(/dev/console) at Fri Feb 20 20:02:43 2009
FATAL: Module processor not founSCSI subsystem initialized
d.
FATAL: Module thermal not found.
libata version 3.00 loaded.
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
logips2pp: Detected unknown logitech mouse model 11
ahci 0000:00:12.0: version 3.0
IOAPIC[0]: Set routing entry (4-22 -> 0x81 -> IRQ 22 Mode:1 Active:1)
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
ata5: softreset failed (device not ready)
ata5: failed due to HW bug, retry pmp=0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfdffe000 port 0xfdffe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00)
ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907
Probing IDE interface ide0...
hda: ST3120023A, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
IOAPIC[0]: Set routing entry (4-21 -> 0x89 -> IRQ 21 Mode:1 Active:1)
aic7xxx 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
FATAL: Module fan not found.
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
sky2 driver version 1.22
sky2 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 5
sky2 0000:04:00.0: Marvell Yukon 88E8056 Gigabit Ethernet Controller
Part Number: Yukon 88E8056
Engineering Level: Rev. 1.3
Manufacturer: Marvell
sky2 0000:04:00.0: irq 1275 for MSI/MSI-X
sky2 eth0: addr 00:e0:4d:7a:8c:ee
Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
preping 03-storage.sh
running 03-storage.sh
preping 04-udev.sh
running 04-udev.sh
Creating device nodes with udev
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
sda1 sda2 sda3 < sda5<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
sda6<6>usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28.3-1000Hz ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
sda7<6>ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
sda8<6>ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
sda9<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
sda10 >
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8<6>usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28.3-1000Hz ehci_hcd
sdb9<6>usb usb2: SerialNumber: 0000:00:13.5
IOAPIC[0]: Set routing entry (4-17 -> 0x99 -> IRQ 17 Mode:1 Active:1)
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sdb10 >
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:<6>usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sdc1
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
sd 4:0:0:0: [sdc] Attached SCSI disk
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28.3-1000Hz ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28.3-1000Hz ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
usb 2-1: new high speed USB device using ehci_hcd and address 2
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28.3-1000Hz ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=03f0, idProduct=5111
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Photosmart 3200 series
usb 2-1: Manufacturer: HP
usb 2-1: SerialNumber: MY5B98310Z045K
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.28.3-1000Hz ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
preping 05-blogd.sh
running 05-blogd.sh
preping 11-block.sh
running 11-block.sh
preping 11-usb.sh
running 11-usb.sh
preping 21-devinit_done.sh
running 21-devinit_done.sh
preping 81-kdump.sh
running 81-kdump.sh
preping 82-resume.userspace.sh
running 82-resume.userspace.sh
preping 83-resume.kernel.sh
running 83-resume.kernel.sh
preping 84-mount.sh
running 84-mount.sh
Waiting for device /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 to appear: ok
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
fsck 1.40.8 (13-Mar-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
usb 1-2: new full speed USB device using ohci_hcd and address 2
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5: Superblock last write time is in the future. FIXED.
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5: clean, 324701/3280320 files, 3553629/6554512 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
part5
preping 85-remount.sh
running 85-remount.sh
usb 1-2: device descriptor read/64, error -62
preping 91-createfb.sh
running 91-createfb.sh
preping 91-killblogd.sh
running 91-killblogd.sh
preping 91-killudev.sh
running 91-killudev.sh
preping 91-shell.sh
running 91-shell.sh
preping 92-killblogd2.sh
running 92-killblogd2.sh
usb 1-2: device descriptor read/64, error -62
usb 1-2: new full speed USB device using ohci_hcd and address 3
usb 1-2: device descriptor read/64, error -62
preping 93-boot.sh
running 93-boot.sh
INIT: version 2.86 booting
usb 1-2: device descriptor read/64, error -62
usb 1-2: new full speed USB device using ohci_hcd and address 4
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Mounting debugfs at /sys/kernel/debug done
Initializing /dev done
Mounting devpts at /dev/pts done
done
Starting udevd: usb 1-2: device not accepting address 4, error -62
usb 1-2: new full speed USB device using ohci_hcd and address 5
usb 1-2: device not accepting address 5, error -62
hub 1-0:1.0: unable to enumerate USB device on port 2
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:02:00.0: setting latency timer to 64
e1000e 0000:02:00.0: irq 1274 for MSI/MSI-X
Linux agpgart interface v0.103
0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:02:00.0: eth1: MAC: 1, PHY: 4, PBA No: d50854-003
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda:<6>ide-cd driver 5.00
hda1
ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Initializing USB Mass Storage driver...
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
usbcore: registered new interface driver usblp
usb-storage: waiting for device to settle before scanning
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
ppdev: user-space parallel port driver
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3055: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3059: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3063: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3064: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3072: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
done
Loading required kernel modules done
Activating swap-devices in /etc/fstab...
Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:83939done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
mount: according to mtab, /dev/sda5 is already mounted on /
Setting up the hardware clock done
Activating device mapper...
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
done
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part1
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part1: clean, 90/131616 files, 52900/263056 blocks
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part6
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part6: clean, 84153/5903072 files, 1456995/11797726 blocks
[/sbin/fsck.ext3 (1) -- /misc] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part7
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part7: clean, 10/8536064 files, 313923/17040940 blocks
[/sbin/fsck.ext3 (1) -- /usr/local] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part8
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part8: clean, 10111/656000 files, 562964/1311297 blocks
[/sbin/fsck.ext3 (1) -- /usr/src] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part9
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part9: clean, 988870/6557152 files, 10061056/13109032 blocks
[/sbin/fsck.ext3 (1) -- /misc1] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part10
/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part10: clean, 13/12992512 files, 455787/25967056 blocks
[/sbin/fsck.ext3 (1) -- /local] fsck.ext3 -a /dev/disk/by-id/ata-ST3320620AS_6QF4HDWN-part1
/dev/disk/by-id/ata-ST3320620AS_6QF4HDWN-part1: clean, 1673848/39075840 files, 21296206/78142160 blocks
[/sbin/fsck.ext3 (1) -- /lcrs] fsck.ext3 -a /dev/disk/by-id/ata-ST3120023A_3KA0P431-part1
/dev/disk/by-id/ata-ST3120023A_3KA0P431-part1: clean, 32325/14663680 fdone, 24187969/29302552 blocks
done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
loop: module loaded
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda1 on /boot type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda6 on /home type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda7 on /misc type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda8 on /usr/local type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda9 on /usr/src type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda10 on /misc1 type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sdc1 on /local type ext3 (rw,acl,user_xattr)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/hda1 on /lcrs type ext3 (rw,acl,user_xattr) done
Retry device configuration: done
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports done
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
fuse init (API version 7.10)
Loading fuse module done
Mounting fuse control filesystem done
Mounting securityfs on /sys/kernel/security done
ls: cannot access /sys/module/apparmor: No such file or directory
ls: cannot access /sys/module/apparmor: No such file or directory
Loading AppArmor module failed
Enabling syn flood protection done
Disabling IP forwarding done
done
Creating /var/log/boot.msg done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Activating remaining swap-devices in /etc/fstab... done
scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
sd 9:0:0:0: [sdd] Attached SCSI removable disk
sd 9:0:0:0: Attached scsi generic sg3 type 0
Setting up hostname 'harley' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
System Boot Control: The system has been set up
Failed features: boot.apparmor
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
Linking /usr/src/linix to /usr/src/linux-2.6.28.3-1000Hz
No rtom kernel driver found in /lib/modules/2.6.28.3-1000Hz/misc
kernel.shmmax = 81943040 done
INIT: Entering runlevel: 5
Boot logging started on /dev/ttyS0(/dev/console) at Fri Feb 20 20:03:08 2009
Master Resource Control: previous runlevel: N, switching to runlevel: 5
mkdir: cannot create directory `/dev/cpuset': File exists
mount: cpuset already mounted or /dev/cpuset busy
mount: according to mtab, cpuset is already mounted on /dev/cpuset
Initializing random number generator done
acpid: starting up
Starting resource manager done
Starting acpid done
Starting syslog services done
Starting D-Bus daemon done
Starting ConsoleKit done
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Loading CPUFreq modules (CPUFreq not supported)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Starting HAL daemonip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Starting Firewall Initialization (phase 1 of 2) done
done
Starting service kdm done
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8 done
eth0 device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 13)
eth0 IP address: 10.10.10.100/24 done
eth1 device: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
eth1 IP address: 192.168.10.100/24 done
Waiting for mandatory devices: eth2 eth3 __NSC__
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
eth2 No interface found failed
eth3 No interface found failed
Setting up service network . . . . . . . . . . . . . . failed
Mount CIFS File Systems unused
Starting RPC portmap daemon done
VMware Server is installed, but it has not been (correctly) configured
for the running kernel. To (re-)configure it, invoke the
following command: /usr/bin/vmware-config.pl.
Loading Module rfm2g.
=========================================================
COPYRIGHT NOTICE
Copyright (C) 2002, 2004 GE Fanuc Embedded Systems, Inc.
International Copyright Secured. All Rights Reserved.
=========================================================
cat: /proc/rfm2g: No such file or directory
/etc/init.d/rfm2g_init: line 84: [: 0: unary operator expected
chmod: cannot access `/dev/rfm2g[0-4]': No such file or directory
failed
Starting auditd done
Starting cupsd done
Starting SSH daemon done
Starting Avahi daemon. done
Clearing PCIRMS Sram Memory
prm_clear_sram: prm_mmap_open failed: No such device
PCIRMS Board 0 SRAM Cleared with option local
done
Initializing gpib boards
FATAL: Module tnt4882 not found.
failed to open device file '/dev/gpib0'
main: No such file or directory
failed to open device file '/dev/gpib1'
main: No such file or directory
failed
Starting Avahi DNS Configuration daemon done
Loading keymap i386/qwerty/us.map.gz done
Loading compose table latin1.add done
Start Unicode mode done
Loading console font lat9w-16.psfu -m trivial G0:loadable done
ntpd: time slew +0.024770s
Starting network time protocol daemon (NTPD) done
Starting Name Service Cache Daemon done
Starting mail service (Postfix) done
Starting CRON daemon done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
done
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network vmware gpib rfm2g_init
Skipped services in runlevel 5: smbfs prm prm_dmatest prm_healthy splash
Offline
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
2009-02-21 1:14 ` Mark Hounschell
@ 2009-02-21 13:20 ` Mark Hounschell
0 siblings, 0 replies; 59+ messages in thread
From: Mark Hounschell @ 2009-02-21 13:20 UTC (permalink / raw)
To: Andreas Herrmann
Cc: Borislav Petkov, Mark Hounschell, john stultz, linux-kernel,
Thomas Gleixner
Mark Hounschell wrote:
> Andreas Herrmann wrote:
>> Mark,
>>
>> Here we go ...
>>
>> Attached is a compound version against v2.6.28.4 of some
>> hpet patches that I'd like to submit asap.
>>
>> Can you please apply this patch and test it on your machine.
>>
>> By chance I've found a machine wich also hangs with HZ_1000.
>> And this patch fixes the problem on this machine.
>>
>>
>> Regards,
>> Andreas
>>
>> PS: Please boot with "hpet=verbose" to show the HPET registers
>> (no additional debug parameter needed this time).
>>
>>
>
> Yep, that works here too. Attached is the bootlog FYI.
>
> Regards
> Mark
>
>
>
Andreas, I'm sorry but I fat fingered something last night. It didn't work for
me after all. I was configured as 250Hz. Sorry.
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #11 SMP PREEMPT Sat Feb
21 08:07:35 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 32ffe000 @ 10000-16000
RAMDISK: 374d0000 - 37feff94
Allocated new RAMDISK: 004a7000 - 00fc6f94
Move RAMDISK from 00000000374d0000 - 0000000037feff93 to 004a7000 - 00fc6f93
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
2255MB HIGHMEM available.
815MB LOWMEM available.
mapped low ram: 0 - 32ffe000
low ram: 00000000 - 32ffe000
bootmap 00012000 - 00018600
(9 early reservations) ==> bootmem [0000000000 - 0032ffe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc6f94] NEW RAMDISK ==> [00004a7000 - 0000fc6f94]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00032ffe
HighMem 0x00032ffe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
On node 0 totalpages: 786287
free_area_init_node: node 0, pgdat c03a5900, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1600 pages used for memmap
Normal zone: 203198 pages, LIFO batch:31
HighMem zone: 4512 pages used for memmap
HighMem zone: 572994 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
hpet=verbose debug apic=debug apm=off selinux=0 noresume splash=silent vmalloc=192
M vga=0x317 console=ttyS0,115200n8
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3000.326 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103636k/3145600k available (1836k kernel code, 40720k reserved, 1098k
data, 276k init, 2310024k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf37fe000 - 0xff7fe000 ( 192 MB)
lowmem : 0xc0000000 - 0xf2ffe000 ( 815 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02cb0d7 - 0xc03ddc4c (1098 kB)
.text : 0xc0100000 - 0xc02cb0d7 (1836 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet: hpet_enable(837):
hpet: ID: 0x43538301, PERIOD: 0x429b17e
hpet: CFG: 0x0, STATUS: 0x0
hpet: COUNTER_l: 0x0, COUNTER_h: 0x0
hpet: T0: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T0: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T0 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T1: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T1: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T1 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T2: CFG_l: 0x10, CFG_h: 0xc0ffff
hpet: T2: CMP_l: 0xffffffff, CMP_h: 0x0
hpet: T2 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: T3: CFG_l: 0x0, CFG_h: 0x0
hpet: T3: CMP_l: 0x0, CMP_h: 0x0
hpet: T3 ROUTE_l: 0x0, ROUTE_h: 0x0
hpet: hpet_se
Regards
Mark
^ permalink raw reply [flat|nested] 59+ messages in thread
end of thread, other threads:[~2009-02-21 13:20 UTC | newest]
Thread overview: 59+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-01-18 12:38 PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor Mark Hounschell
2009-01-19 8:48 ` Mark Hounschell
2009-01-19 12:41 ` Bartlomiej Zolnierkiewicz
2009-01-19 14:45 ` Mark Hounschell
2009-01-19 23:05 ` Mark Hounschell
2009-01-19 14:22 ` Borislav Petkov
2009-01-19 14:54 ` Mark Hounschell
2009-01-19 23:14 ` Mark Hounschell
2009-01-20 0:25 ` john stultz
2009-01-20 9:08 ` Mark Hounschell
2009-01-20 9:37 ` Andreas Herrmann
2009-01-20 21:08 ` Mark Hounschell
2009-01-23 9:34 ` Mark Hounschell
2009-01-23 13:04 ` Andreas Herrmann
2009-01-23 14:47 ` Borislav Petkov
2009-01-23 22:24 ` Mark Hounschell
2009-01-23 22:46 ` Mark Hounschell
2009-01-26 18:26 ` Mark Hounschell
2009-01-27 16:38 ` Borislav Petkov
2009-01-28 0:30 ` Mark Hounschell
2009-01-28 0:33 ` Mark Hounschell
2009-01-31 9:15 ` Mark Hounschell
2009-02-02 17:05 ` Borislav Petkov
2009-02-03 9:17 ` Mark Hounschell
2009-02-03 15:11 ` Borislav Petkov
2009-02-03 19:15 ` Mark Hounschell
2009-02-05 17:19 ` Mark Hounschell
2009-02-06 13:52 ` Borislav Petkov
2009-02-06 14:11 ` Mark Hounschell
2009-02-06 17:55 ` Mark Hounschell
2009-02-06 22:20 ` Mark Hounschell
2009-02-09 14:18 ` Borislav Petkov
2009-02-09 15:29 ` Mark Hounschell
2009-02-18 13:11 ` Mark Hounschell
2009-02-18 14:18 ` Borislav Petkov
2009-02-18 16:57 ` Mark Hounschell
2009-02-18 17:42 ` Borislav Petkov
2009-02-18 21:16 ` Mark Hounschell
2009-02-19 10:37 ` Mark Hounschell
2009-02-19 14:11 ` Andreas Herrmann
2009-02-19 15:16 ` Mark Hounschell
2009-02-19 15:19 ` Borislav Petkov
2009-02-19 15:54 ` Mark Hounschell
2009-02-20 11:53 ` Andreas Herrmann
2009-02-20 12:34 ` Ingo Molnar
2009-02-20 21:51 ` Andreas Herrmann
2009-02-20 15:43 ` Mark Hounschell
2009-02-20 16:08 ` Andreas Herrmann
2009-02-20 16:38 ` Andreas Herrmann
2009-02-20 17:09 ` Mark Hounschell
2009-02-20 17:40 ` Mark Hounschell
2009-02-20 18:22 ` Andreas Herrmann
2009-02-20 18:28 ` Mark Hounschell
2009-02-20 19:54 ` Mark Hounschell
2009-02-20 20:27 ` Mark Hounschell
2009-02-20 22:28 ` Andreas Herrmann
2009-02-21 1:14 ` Mark Hounschell
2009-02-21 13:20 ` Mark Hounschell
2009-02-20 17:06 ` Mark Hounschell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).