* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh [not found] <1347403947-20187-1-git-send-email-johunt@akamai.com> @ 2012-09-11 23:02 ` Josh Hunt 2012-09-12 8:51 ` Borislav Petkov 0 siblings, 1 reply; 20+ messages in thread From: Josh Hunt @ 2012-09-11 23:02 UTC (permalink / raw) To: Josh Hunt; +Cc: borislav.petkov, linux-edac, linux-kernel [fixing lkml address] On 09/11/2012 05:52 PM, Josh Hunt wrote: > With recent kernels we noticed that edac was reporting double the memory size on > systems running with AMD family 0Fh processors. I'm not very familiar with the > code, but this resolves it from what I can see on my systems. At least in > amd64_debug_display_dimm_sizes() and k8_dbam_to_chip_select() there appeared > to be redundant shifts to the left by 1 when WIDTH_128 is present. > > thanks > Josh > > --- > > Since commit 41d8bfaba70311c2fa0666554ef160ea8ffc9daf the memory size reported > by edac has been double. Adding to the shift if WIDTH_128 is set looks to be > redundant, removing. > > Signed-off-by: Josh Hunt <johunt@akamai.com> > --- > drivers/edac/amd64_edac.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c > index 5a297a2..c796710 100644 > --- a/drivers/edac/amd64_edac.c > +++ b/drivers/edac/amd64_edac.c > @@ -1123,7 +1123,7 @@ static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, > > if (pvt->ext_model >= K8_REV_F) { > WARN_ON(cs_mode > 11); > - return ddr2_cs_size(cs_mode, dclr & WIDTH_128); > + return ddr2_cs_size(cs_mode, 0); > } > else if (pvt->ext_model >= K8_REV_D) { > unsigned diff; > ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-11 23:02 ` [PATCH] amd64_edac: Memory size reported double on processor family 0Fh Josh Hunt @ 2012-09-12 8:51 ` Borislav Petkov 2012-09-12 12:38 ` Josh Hunt 0 siblings, 1 reply; 20+ messages in thread From: Borislav Petkov @ 2012-09-12 8:51 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Tue, Sep 11, 2012 at 06:02:01PM -0500, Josh Hunt wrote: > On 09/11/2012 05:52 PM, Josh Hunt wrote: > >With recent kernels we noticed that edac was reporting double the memory size on > >systems running with AMD family 0Fh processors. I'm not very familiar with the > >code, but this resolves it from what I can see on my systems. At least in > >amd64_debug_display_dimm_sizes() and k8_dbam_to_chip_select() there appeared > >to be redundant shifts to the left by 1 when WIDTH_128 is present. Any chance you could enable CONFIG_EDAC_DEBUG, boot and send me your whole dmesg? Privately is fine too. Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 8:51 ` Borislav Petkov @ 2012-09-12 12:38 ` Josh Hunt 2012-09-12 12:52 ` Josh Hunt 0 siblings, 1 reply; 20+ messages in thread From: Josh Hunt @ 2012-09-12 12:38 UTC (permalink / raw) To: Borislav Petkov; +Cc: linux-edac, linux-kernel [-- Attachment #1: Type: text/plain, Size: 734 bytes --] On 09/12/2012 03:51 AM, Borislav Petkov wrote: > On Tue, Sep 11, 2012 at 06:02:01PM -0500, Josh Hunt wrote: >> On 09/11/2012 05:52 PM, Josh Hunt wrote: >>> With recent kernels we noticed that edac was reporting double the memory size on >>> systems running with AMD family 0Fh processors. I'm not very familiar with the >>> code, but this resolves it from what I can see on my systems. At least in >>> amd64_debug_display_dimm_sizes() and k8_dbam_to_chip_select() there appeared >>> to be redundant shifts to the left by 1 when WIDTH_128 is present. > > Any chance you could enable CONFIG_EDAC_DEBUG, boot and send me your > whole dmesg? Privately is fine too. > > Thanks. > Sure. Attached. This is booting with latest git. Josh [-- Attachment #2: dmesg.log --] [-- Type: text/x-log, Size: 56476 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-rc5+ (johunt@kernelsuite-780) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #33 SMP Wed Sep 12 05:10:20 PDT 2012 [ 0.000000] Command line: root=UUID=2ceb4350-c206-4bcd-b8b3-e6dd2ff5b021 ro oops=panic panic=30 INIT_VERBOSE=yes init=/sbin/init processor.max_cstate=1 reboot_type=1 nmi_watchdog=2,120 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000edfeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000edff0000-0x00000000edffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000edffe000-0x00000000edffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec02fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000111ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Supermicro H8SSL-I2/H8SSL-I2, BIOS 080011 09/05/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x112000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF00000000 write-back [ 0.000000] 1 base 0100000000 mask FFF0000000 write-back [ 0.000000] 2 base 0110000000 mask FFFE000000 write-back [ 0.000000] 3 base 00EE000000 mask FFFE000000 uncachable [ 0.000000] 4 base 00F0000000 mask FFF0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000112000000 aka 4384M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xee000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xedff0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xedfeffff] [ 0.000000] [mem 0x00000000-0xeddfffff] page 2M [ 0.000000] [mem 0xede00000-0xedfeffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xedfeffff @ [mem 0x1f88b000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x111ffffff] [ 0.000000] [mem 0x100000000-0x111ffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x111ffffff @ [mem 0xedfea000-0xedfeffff] [ 0.000000] RAMDISK: [mem 0x37511000-0x37feffff] [ 0.000000] ACPI: RSDP 00000000000f9e40 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000edff0000 00030 (v01 A M I OEMRSDT 09000705 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000edff0200 00084 (v02 A M I OEMFACP 09000705 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000edff0410 030C5 (v01 1SSL2 1SSL2005 00000005 INTL 02002026) [ 0.000000] ACPI: FACS 00000000edffe000 00040 [ 0.000000] ACPI: APIC 00000000edff0390 00076 (v01 A M I OEMAPIC 09000705 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000edffe040 00056 (v01 A M I AMI_OEM 09000705 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000111ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x111ffffff] [ 0.000000] NODE_DATA [mem 0x111ffc000-0x111ffffff] [ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff88010d400000-ffff880110ffffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x111ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xedfeffff] [ 0.000000] node 0: [mem 0x100000000-0x111ffffff] [ 0.000000] On node 0 totalpages: 1048447 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 8 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 956456 pages, LIFO batch:31 [ 0.000000] Normal zone: 1008 pages used for memmap [ 0.000000] Normal zone: 72720 pages, LIFO batch:15 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32]) [ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] e820: [mem 0xee000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880111c00000 s78720 r8192 d23680 u1048576 [ 0.000000] pcpu-alloc: s78720 r8192 d23680 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1033095 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=2ceb4350-c206-4bcd-b8b3-e6dd2ff5b021 ro oops=panic panic=30 INIT_VERBOSE=yes init=/sbin/init processor.max_cstate=1 reboot_type=1 nmi_watchdog=2,120 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ e4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ e4000000 [ 0.000000] Memory: 3979312k/4489216k available (5189k kernel code, 295428k absent, 214476k reserved, 3016k data, 896k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.076 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.001138] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.15 BogoMIPS (lpj=2394076) [ 0.001409] pid_max: default: 32768 minimum: 301 [ 0.001573] Security Framework initialized [ 0.001717] AppArmor: AppArmor disabled by boot time parameter [ 0.002291] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004936] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006273] Mount-cache hash table entries: 256 [ 0.006621] Initializing cgroup subsys cpuacct [ 0.006755] Initializing cgroup subsys devices [ 0.006891] Initializing cgroup subsys freezer [ 0.007002] Initializing cgroup subsys net_cls [ 0.007134] Initializing cgroup subsys blkio [ 0.007267] Initializing cgroup subsys perf_event [ 0.007425] tseg: 0000000000 [ 0.007439] CPU: Physical Processor ID: 0 [ 0.007572] CPU: Processor Core ID: 0 [ 0.007703] mce: CPU supports 5 MCE banks [ 0.007840] LVT offset 0 assigned for vector 0xf9 [ 0.008005] process: using AMD E400 aware idle routine [ 0.008972] Freeing SMP alternatives: 24k freed [ 0.009017] ACPI: Core revision 20120711 [ 0.012420] ftrace: allocating 19835 entries in 78 pages [ 0.020810] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.030958] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 1216 HE stepping 03 [ 0.031995] Performance Events: AMD PMU driver. [ 0.031995] ... version: 0 [ 0.031995] ... bit width: 48 [ 0.031995] ... generic registers: 4 [ 0.031995] ... value mask: 0000ffffffffffff [ 0.031995] ... max period: 00007fffffffffff [ 0.031995] ... fixed-purpose events: 0 [ 0.031995] ... event mask: 000000000000000f [ 0.032447] MCE: In-kernel MCE decoding enabled. [ 0.032594] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.033078] smpboot: Booting Node 0, Processors #1 OK [ 0.104088] Brought up 2 CPUs [ 0.104218] smpboot: Total of 2 processors activated (9575.18 BogoMIPS) [ 0.106174] NET: Registered protocol family 16 [ 0.106742] node 0 link 0: io port [1000, ffffff] [ 0.106745] TOM: 00000000ee000000 aka 3808M [ 0.106880] node 0 link 0: mmio [a0000, bffff] [ 0.106883] node 0 link 0: mmio [ee000000, ffe0ffff] [ 0.106886] TOM2: 0000000112000000 aka 4384M [ 0.106988] bus: [bus 00-ff] on node 0 link 0 [ 0.106990] bus: 00 [io 0x0000-0xffff] [ 0.106991] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.106992] bus: 00 [mem 0xee000000-0xffffffff] [ 0.106994] bus: 00 [mem 0x112000000-0xfcffffffff] [ 0.107043] ACPI: bus type pci registered [ 0.107347] dca service started, version 1.12.1 [ 0.107514] PCI: Using configuration type 1 for base access [ 0.113895] bio: create slab <bio-0> at 0 [ 0.114216] ACPI: Added _OSI(Module Device) [ 0.114353] ACPI: Added _OSI(Processor Device) [ 0.114485] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.114619] ACPI: Added _OSI(Processor Aggregator Device) [ 0.115742] ACPI: EC: Look up EC in DSDT [ 0.117055] ACPI: Executed 1 blocks of module-level executable AML code [ 0.118730] ACPI: Interpreter enabled [ 0.118864] ACPI: (supports S0 S5) [ 0.118988] ACPI: Using IOAPIC for interrupt routing [ 0.127498] ACPI: No dock devices found. [ 0.127637] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.127943] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.128153] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.128156] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.128159] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.128161] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.128164] pci_root PNP0A03:00: host bridge window [mem 0xee000000-0xffffffff] (ignored) [ 0.128166] PCI: root bus 00: hardware-probed resources [ 0.128172] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.128445] PCI host bridge to bus 0000:00 [ 0.128579] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 0.128581] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.128717] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.128854] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.128983] pci_bus 0000:00: root bus resource [mem 0xee000000-0xffffffff] [ 0.129120] pci_bus 0000:00: root bus resource [mem 0x112000000-0xfcffffffff] [ 0.129270] pci 0000:00:01.0: [1166:0036] type 01 class 0x060400 [ 0.129293] pci 0000:00:01.0: Enabling HT MSI Mapping [ 0.129460] pci 0000:00:02.0: [1166:0205] type 00 class 0x060000 [ 0.129499] pci 0000:00:02.1: [1166:0214] type 00 class 0x01018a [ 0.129510] pci 0000:00:02.1: reg 10: [io 0x01f0-0x01f7] [ 0.129518] pci 0000:00:02.1: reg 14: [io 0x03f4-0x03f7] [ 0.129527] pci 0000:00:02.1: reg 18: [io 0x0170-0x0177] [ 0.129535] pci 0000:00:02.1: reg 1c: [io 0x0374-0x0377] [ 0.129543] pci 0000:00:02.1: reg 20: [io 0xffa0-0xffaf] [ 0.129573] pci 0000:00:02.2: [1166:0234] type 00 class 0x060100 [ 0.129639] pci 0000:00:03.0: [1166:0223] type 00 class 0x0c0310 [ 0.129654] pci 0000:00:03.0: reg 10: [mem 0xff6ee000-0xff6eefff] [ 0.129663] pci 0000:00:03.0: reg 14: [io 0xe800-0xe8ff] [ 0.129731] pci 0000:00:03.1: [1166:0223] type 00 class 0x0c0310 [ 0.129746] pci 0000:00:03.1: reg 10: [mem 0xff6ed000-0xff6edfff] [ 0.129754] pci 0000:00:03.1: reg 14: [io 0xd800-0xd8ff] [ 0.129821] pci 0000:00:03.2: [1166:0223] type 00 class 0x0c0320 [ 0.129836] pci 0000:00:03.2: reg 10: [mem 0xff6ec000-0xff6ecfff] [ 0.129844] pci 0000:00:03.2: reg 14: [io 0xd400-0xd4ff] [ 0.130018] pci 0000:00:03.2: supports D1 D2 [ 0.130020] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot [ 0.130044] pci 0000:00:05.0: [1002:515e] type 00 class 0x030000 [ 0.130058] pci 0000:00:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.130067] pci 0000:00:05.0: reg 14: [io 0xe000-0xe0ff] [ 0.130076] pci 0000:00:05.0: reg 18: [mem 0xff6f0000-0xff6fffff] [ 0.130104] pci 0000:00:05.0: reg 30: [mem 0xff6c0000-0xff6dffff pref] [ 0.130127] pci 0000:00:05.0: supports D1 D2 [ 0.130153] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.130169] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.130181] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.130196] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.130229] pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-ff] [ 0.130244] pci 0000:01:0d.0: [1166:0104] type 01 class 0x060400 [ 0.130278] pci 0000:01:0e.0: [1166:024b] type 00 class 0x01018f [ 0.130287] pci 0000:01:0e.0: reg 10: [io 0xbc00-0xbc07] [ 0.130292] pci 0000:01:0e.0: reg 14: [io 0xb880-0xb883] [ 0.130298] pci 0000:01:0e.0: reg 18: [io 0xb800-0xb807] [ 0.130303] pci 0000:01:0e.0: reg 1c: [io 0xb480-0xb483] [ 0.130308] pci 0000:01:0e.0: reg 20: [io 0xb400-0xb40f] [ 0.130314] pci 0000:01:0e.0: reg 24: [mem 0xff5fe000-0xff5fffff] [ 0.130320] pci 0000:01:0e.0: reg 30: [mem 0xff5c0000-0xff5dffff pref] [ 0.130351] pci 0000:01:0e.1: [1166:024b] type 00 class 0x01018f [ 0.130359] pci 0000:01:0e.1: reg 10: [io 0xb080-0xb087] [ 0.130365] pci 0000:01:0e.1: reg 14: [io 0xb000-0xb003] [ 0.130370] pci 0000:01:0e.1: reg 18: [io 0xac00-0xac07] [ 0.130375] pci 0000:01:0e.1: reg 1c: [io 0xa880-0xa883] [ 0.130381] pci 0000:01:0e.1: reg 20: [io 0xa800-0xa80f] [ 0.130423] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.130560] pci 0000:00:01.0: bridge window [io 0x7000-0xbfff] [ 0.130563] pci 0000:00:01.0: bridge window [mem 0xff000000-0xff5fffff] [ 0.130567] pci 0000:00:01.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.130578] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02] [ 0.130595] pci 0000:02:01.0: [1000:0054] type 00 class 0x010000 [ 0.130612] pci 0000:02:01.0: reg 10: [io 0x9000-0x90ff] [ 0.130623] pci 0000:02:01.0: reg 14: [mem 0xff4fc000-0xff4fffff 64bit] [ 0.130635] pci 0000:02:01.0: reg 1c: [mem 0xff4e0000-0xff4effff 64bit] [ 0.130650] pci 0000:02:01.0: reg 30: [mem 0xff200000-0xff3fffff pref] [ 0.130686] pci 0000:02:01.0: supports D1 D2 [ 0.130711] pci 0000:02:03.0: [14e4:1648] type 00 class 0x020000 [ 0.130729] pci 0000:02:03.0: reg 10: [mem 0xff4d0000-0xff4dffff 64bit] [ 0.130801] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 0.130826] pci 0000:02:03.1: [14e4:1648] type 00 class 0x020000 [ 0.130843] pci 0000:02:03.1: reg 10: [mem 0xff4c0000-0xff4cffff 64bit] [ 0.130915] pci 0000:02:03.1: PME# supported from D3hot D3cold [ 0.130955] pci 0000:01:0d.0: PCI bridge to [bus 02] [ 0.131016] pci 0000:01:0d.0: bridge window [io 0x7000-0x9fff] [ 0.131019] pci 0000:01:0d.0: bridge window [mem 0xff000000-0xff4fffff] [ 0.131023] pci 0000:01:0d.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.131033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.131139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.131170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2._PRT] [ 0.131228] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.131440] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.133631] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.134585] ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.135622] ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.136674] ACPI: PCI Interrupt Link [LN03] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15) [ 0.137627] ACPI: PCI Interrupt Link [LN04] (IRQs 1 3 4 5 6 7 *9 10 11 12 14 15) [ 0.138570] ACPI: PCI Interrupt Link [LN05] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.139621] ACPI: PCI Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.140671] ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.141770] ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15) [ 0.142718] ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 *7 9 10 11 12 14 15) [ 0.143668] ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.144718] ACPI: PCI Interrupt Link [LN11] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.146299] ACPI: PCI Interrupt Link [LN12] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.147433] ACPI: PCI Interrupt Link [LN13] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.148520] ACPI: PCI Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.149571] ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.150620] ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.151670] ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.152716] ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.153767] ACPI: PCI Interrupt Link [LN19] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.154816] ACPI: PCI Interrupt Link [LN20] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.155868] ACPI: PCI Interrupt Link [LN21] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.156913] ACPI: PCI Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.157989] ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.159028] ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.160028] ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.161028] ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.162149] ACPI: PCI Interrupt Link [LN27] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.163199] ACPI: PCI Interrupt Link [LN28] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.164247] ACPI: PCI Interrupt Link [LN29] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.165298] ACPI: PCI Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.166316] ACPI: PCI Interrupt Link [LNUS] (IRQs *10) [ 0.166660] ACPI: PCI Interrupt Link [LNSA] (IRQs *11) [ 0.167156] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.167372] vgaarb: loaded [ 0.167503] vgaarb: bridge control possible 0000:00:05.0 [ 0.167818] SCSI subsystem initialized [ 0.167982] ACPI: bus type usb registered [ 0.168192] usbcore: registered new interface driver usbfs [ 0.168367] usbcore: registered new interface driver hub [ 0.168579] usbcore: registered new device driver usb [ 0.168869] PCI: Using ACPI for IRQ routing [ 0.168981] PCI: pci_cache_line_size set to 64 bytes [ 0.169047] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.169050] e820: reserve RAM buffer [mem 0xedff0000-0xefffffff] [ 0.169052] e820: reserve RAM buffer [mem 0x112000000-0x113ffffff] [ 0.177566] pnp: PnP ACPI init [ 0.177709] ACPI: bus type pnp registered [ 0.178031] pnp 00:00: [bus 00-ff] [ 0.178034] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.178038] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.178040] pnp 00:00: [io 0x0d00-0xffff window] [ 0.178043] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.178045] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.178047] pnp 00:00: [mem 0xee000000-0xffffffff window] [ 0.178146] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.178176] pnp 00:01: [dma 4] [ 0.178179] pnp 00:01: [io 0x0000-0x000f] [ 0.178181] pnp 00:01: [io 0x0081-0x0083] [ 0.178183] pnp 00:01: [io 0x0087] [ 0.178185] pnp 00:01: [io 0x0089-0x008b] [ 0.178188] pnp 00:01: [io 0x008f] [ 0.178190] pnp 00:01: [io 0x00c0-0x00df] [ 0.178244] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.178256] pnp 00:02: [io 0x0070-0x0071] [ 0.178268] pnp 00:02: [irq 8] [ 0.178322] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.178355] pnp 00:03: [io 0x0060] [ 0.178357] pnp 00:03: [io 0x0064] [ 0.178362] pnp 00:03: [irq 1] [ 0.178420] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.178473] pnp 00:04: [irq 12] [ 0.178529] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.178537] pnp 00:05: [io 0x0061] [ 0.178591] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.178601] pnp 00:06: [io 0x00f0-0x00ff] [ 0.178606] pnp 00:06: [irq 13] [ 0.178661] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.179009] pnp 00:07: [io 0x03f0-0x03f5] [ 0.179011] pnp 00:07: [io 0x03f7] [ 0.179016] pnp 00:07: [irq 6] [ 0.179018] pnp 00:07: [dma 2] [ 0.179106] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.179373] pnp 00:08: [io 0x03f8-0x03ff] [ 0.179378] pnp 00:08: [irq 4] [ 0.179381] pnp 00:08: [dma 0 disabled] [ 0.179473] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.179740] pnp 00:09: [io 0x02f8-0x02ff] [ 0.179745] pnp 00:09: [irq 3] [ 0.179747] pnp 00:09: [dma 0 disabled] [ 0.179867] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.180336] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] [ 0.180338] pnp 00:0a: [io 0x0600-0x061f] [ 0.180341] pnp 00:0a: [io 0x0520-0x053f] [ 0.180343] pnp 00:0a: [io 0x0540-0x054f] [ 0.180345] pnp 00:0a: [io 0x0544-0x0553] [ 0.180348] pnp 00:0a: [io 0x0550-0x055f] [ 0.180350] pnp 00:0a: [io 0x0640-0x065f] [ 0.180353] pnp 00:0a: [io 0x0800-0x080f] [ 0.180355] pnp 00:0a: [io 0x0aa0-0x0abf] [ 0.180357] pnp 00:0a: [io 0x0ac0-0x0adf] [ 0.180359] pnp 00:0a: [io 0x0ae0-0x0aff] [ 0.180450] system 00:0a: [io 0x0600-0x061f] has been reserved [ 0.180589] system 00:0a: [io 0x0520-0x053f] has been reserved [ 0.180726] system 00:0a: [io 0x0540-0x054f] has been reserved [ 0.180863] system 00:0a: [io 0x0544-0x0553] could not be reserved [ 0.180998] system 00:0a: [io 0x0550-0x055f] has been reserved [ 0.181134] system 00:0a: [io 0x0640-0x065f] has been reserved [ 0.181269] system 00:0a: [io 0x0800-0x080f] has been reserved [ 0.181405] system 00:0a: [io 0x0aa0-0x0abf] has been reserved [ 0.181543] system 00:0a: [io 0x0ac0-0x0adf] has been reserved [ 0.181678] system 00:0a: [io 0x0ae0-0x0aff] has been reserved [ 0.181819] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181893] pnp 00:0b: [io 0x0010-0x001f] [ 0.181895] pnp 00:0b: [io 0x0022-0x003f] [ 0.181898] pnp 00:0b: [io 0x0044-0x005f] [ 0.181900] pnp 00:0b: [io 0x0062-0x0063] [ 0.181902] pnp 00:0b: [io 0x0065-0x006f] [ 0.181904] pnp 00:0b: [io 0x0072-0x007f] [ 0.181906] pnp 00:0b: [io 0x0080] [ 0.181908] pnp 00:0b: [io 0x0084-0x0086] [ 0.181910] pnp 00:0b: [io 0x0088] [ 0.181912] pnp 00:0b: [io 0x008c-0x008e] [ 0.181915] pnp 00:0b: [io 0x0090-0x009f] [ 0.181917] pnp 00:0b: [io 0x00a2-0x00bf] [ 0.181919] pnp 00:0b: [io 0x00e0-0x00ef] [ 0.181921] pnp 00:0b: [io 0x0092] [ 0.181923] pnp 00:0b: [io 0x040b] [ 0.181925] pnp 00:0b: [io 0x04d6] [ 0.181927] pnp 00:0b: [io 0x0c06-0x0c07] [ 0.181929] pnp 00:0b: [io 0x0c49] [ 0.181932] pnp 00:0b: [io 0x0c4a] [ 0.181934] pnp 00:0b: [io 0x0c6f] [ 0.181936] pnp 00:0b: [io 0x0c98] [ 0.181938] pnp 00:0b: [io 0x0f50-0x0f57] [ 0.181940] pnp 00:0b: [io 0x0c00-0x0c01] [ 0.181974] pnp 00:0b: [io 0x0c14] [ 0.181978] pnp 00:0b: [io 0x0c50-0x0c51] [ 0.181980] pnp 00:0b: [io 0x0c52] [ 0.181982] pnp 00:0b: [io 0x0c6c] [ 0.181984] pnp 00:0b: [io 0x0c6f] [ 0.181986] pnp 00:0b: [io 0x0cd6-0x0cd7] [ 0.181988] pnp 00:0b: [io 0x0cd4-0x0cd5] [ 0.181990] pnp 00:0b: [io 0x0cd8-0x0cdf] [ 0.181992] pnp 00:0b: [io 0x002e-0x002f] [ 0.181994] pnp 00:0b: [io 0x0530-0x0531] [ 0.181997] pnp 00:0b: [io 0x0440-0x045f] [ 0.181999] pnp 00:0b: [io 0x0480-0x049f] [ 0.182001] pnp 00:0b: [io 0x04c0-0x04df] [ 0.182003] pnp 00:0b: [io 0x0500-0x051f] [ 0.182005] pnp 00:0b: [io 0x0540-0x055f] [ 0.182007] pnp 00:0b: [io 0x0560-0x057f] [ 0.182009] pnp 00:0b: [io 0x0580-0x058f] [ 0.182011] pnp 00:0b: [io 0x0590-0x05ff] [ 0.182013] pnp 00:0b: [io 0x0660-0x06df] [ 0.182016] pnp 00:0b: [io 0x06e0-0x075f] [ 0.182018] pnp 00:0b: [io 0x0760-0x07ff] [ 0.182020] pnp 00:0b: [io 0x0ca8-0x0cab] [ 0.182022] pnp 00:0b: [io 0x0cac-0x0caf] [ 0.182024] pnp 00:0b: [io 0x04d0-0x04d1] [ 0.182026] pnp 00:0b: [io 0x0500-0x057f] [ 0.182029] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] [ 0.182031] pnp 00:0b: [mem 0xfebfe000-0xfebfefff] [ 0.182033] pnp 00:0b: [mem 0xff600000-0xffffffff] [ 0.182195] system 00:0b: [io 0x040b] has been reserved [ 0.182328] system 00:0b: [io 0x04d6] has been reserved [ 0.182462] system 00:0b: [io 0x0c06-0x0c07] has been reserved [ 0.182601] system 00:0b: [io 0x0c49] has been reserved [ 0.182735] system 00:0b: [io 0x0c4a] has been reserved [ 0.182871] system 00:0b: [io 0x0c6f] has been reserved [ 0.182982] system 00:0b: [io 0x0c98] has been reserved [ 0.183117] system 00:0b: [io 0x0f50-0x0f57] has been reserved [ 0.183252] system 00:0b: [io 0x0c00-0x0c01] has been reserved [ 0.183388] system 00:0b: [io 0x0c14] has been reserved [ 0.183524] system 00:0b: [io 0x0c50-0x0c51] has been reserved [ 0.183660] system 00:0b: [io 0x0c52] has been reserved [ 0.183799] system 00:0b: [io 0x0c6c] has been reserved [ 0.183934] system 00:0b: [io 0x0c6f] has been reserved [ 0.183974] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved [ 0.184110] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved [ 0.184246] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved [ 0.184383] system 00:0b: [io 0x0530-0x0531] has been reserved [ 0.184519] system 00:0b: [io 0x0440-0x045f] has been reserved [ 0.184655] system 00:0b: [io 0x0480-0x049f] has been reserved [ 0.184792] system 00:0b: [io 0x04c0-0x04df] could not be reserved [ 0.184974] system 00:0b: [io 0x0500-0x051f] has been reserved [ 0.185110] system 00:0b: [io 0x0540-0x055f] could not be reserved [ 0.185247] system 00:0b: [io 0x0560-0x057f] has been reserved [ 0.185383] system 00:0b: [io 0x0580-0x058f] has been reserved [ 0.185522] system 00:0b: [io 0x0590-0x05ff] has been reserved [ 0.185658] system 00:0b: [io 0x0660-0x06df] has been reserved [ 0.185796] system 00:0b: [io 0x06e0-0x075f] has been reserved [ 0.185974] system 00:0b: [io 0x0760-0x07ff] has been reserved [ 0.186109] system 00:0b: [io 0x0ca8-0x0cab] has been reserved [ 0.186245] system 00:0b: [io 0x0cac-0x0caf] has been reserved [ 0.186380] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.186516] system 00:0b: [io 0x0500-0x057f] could not be reserved [ 0.186653] system 00:0b: [mem 0xfebfe000-0xfebfefff] has been reserved [ 0.186792] system 00:0b: [mem 0xff600000-0xffffffff] could not be reserved [ 0.186975] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.187037] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.187040] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.187120] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.187247] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.187384] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.187488] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.187492] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.187494] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.187496] pnp 00:0d: [mem 0x00100000-0xedffffff] [ 0.187499] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.187581] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.187709] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.187849] system 00:0d: [mem 0x00100000-0xedffffff] could not be reserved [ 0.187985] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.188633] pnp: PnP ACPI: found 14 devices [ 0.188765] ACPI: ACPI bus type pnp unregistered [ 0.196903] Switching to clocksource acpi_pm [ 0.196973] pci 0000:01:0d.0: PCI bridge to [bus 02] [ 0.196973] pci 0000:01:0d.0: bridge window [io 0x7000-0x9fff] [ 0.196973] pci 0000:01:0d.0: bridge window [mem 0xff000000-0xff4fffff] [ 0.196973] pci 0000:01:0d.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.196973] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.196973] pci 0000:00:01.0: bridge window [io 0x7000-0xbfff] [ 0.197965] pci 0000:00:01.0: bridge window [mem 0xff000000-0xff5fffff] [ 0.198147] pci 0000:00:01.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.198369] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.198372] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.198374] pci_bus 0000:00: resource 6 [mem 0xee000000-0xffffffff] [ 0.198377] pci_bus 0000:00: resource 7 [mem 0x112000000-0xfcffffffff] [ 0.198379] pci_bus 0000:01: resource 0 [io 0x7000-0xbfff] [ 0.198382] pci_bus 0000:01: resource 1 [mem 0xff000000-0xff5fffff] [ 0.198384] pci_bus 0000:01: resource 2 [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.198387] pci_bus 0000:02: resource 0 [io 0x7000-0x9fff] [ 0.198389] pci_bus 0000:02: resource 1 [mem 0xff000000-0xff4fffff] [ 0.198392] pci_bus 0000:02: resource 2 [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.198439] NET: Registered protocol family 2 [ 0.199470] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.203620] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.204383] TCP: Hash tables configured (established 524288 bind 65536) [ 0.204580] TCP: reno registered [ 0.204721] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.204893] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.205148] NET: Registered protocol family 1 [ 0.205377] RPC: Registered named UNIX socket transport module. [ 0.205516] RPC: Registered udp transport module. [ 0.205648] RPC: Registered tcp transport module. [ 0.205782] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.205974] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205] [ 0.340042] pci 0000:00:05.0: Boot video device [ 0.340067] PCI: CLS 64 bytes, default 64 [ 0.340112] Trying to unpack rootfs image as initramfs... [ 0.592333] Freeing initrd memory: 11132k freed [ 0.599420] PCI-DMA: Disabling AGP. [ 0.599652] PCI-DMA: aperture base @ e4000000 size 65536 KB [ 0.599786] PCI-DMA: using GART IOMMU. [ 0.599919] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.604862] audit: initializing netlink socket (disabled) [ 0.605026] type=2000 audit(1347453023.604:1): initialized [ 0.623292] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.624182] VFS: Disk quotas dquot_6.5.2 [ 0.624336] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.624672] NFS: Registering the id_resolver key type [ 0.624820] Key type id_resolver registered [ 0.624951] Key type id_legacy registered [ 0.625097] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.625528] msgmni has been set to 7922 [ 0.625900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.626150] io scheduler noop registered [ 0.626282] io scheduler deadline registered [ 0.626423] io scheduler cfq registered (default) [ 0.626796] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.627028] ACPI: Power Button [PWRB] [ 0.627234] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.627448] ACPI: Sleep Button [SLPB] [ 0.627642] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.627854] ACPI: Power Button [PWRF] [ 0.628077] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3 [ 0.628288] ACPI: Sleep Button [SLPF] [ 0.628535] ACPI: processor limited to max C-state 1 [ 0.628878] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.652058] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.672881] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.693669] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.714757] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.735599] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.736079] Real Time Clock Driver v1.12b [ 0.736376] Linux agpgart interface v0.103 [ 0.738599] brd: module loaded [ 0.739872] loop: module loaded [ 0.740022] Uniform Multi-Platform E-IDE driver [ 0.740257] serverworks 0000:00:02.1: IDE controller (0x1166:0x0214 rev 0x00) [ 0.740419] serverworks 0000:00:02.1: not 100% native mode: will probe irqs later [ 0.740633] ide0: BM-DMA at 0xffa0-0xffa7 [ 0.740774] Probing IDE interface ide0... [ 1.715014] hdb: CD-224E-R, ATAPI CD/DVD-ROM drive [ 1.716916] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.717582] hdb: UDMA/33 mode selected [ 1.728769] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.729318] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.729533] ide-gd driver 1.18 [ 1.729703] ide-cd driver 5.00 [ 1.740619] ide-cd: hdb: ATAPI 24X CD-ROM drive, 90kB Cache [ 1.740951] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.787244] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.787380] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.787706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.787906] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 1.788126] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 1.809030] ehci_hcd 0000:00:03.2: irq 10, io mem 0xff6ec000 [ 1.815014] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 1.815302] hub 1-0:1.0: USB hub found [ 1.815436] hub 1-0:1.0: 4 ports detected [ 1.815657] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.815834] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 1.816037] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 1.816261] ohci_hcd 0000:00:03.0: irq 10, io mem 0xff6ee000 [ 1.871152] hub 2-0:1.0: USB hub found [ 1.871288] hub 2-0:1.0: 2 ports detected [ 1.871480] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 1.871671] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 1.871895] ohci_hcd 0000:00:03.1: irq 10, io mem 0xff6ed000 [ 1.927148] hub 3-0:1.0: USB hub found [ 1.927284] hub 3-0:1.0: 2 ports detected [ 1.927482] uhci_hcd: USB Universal Host Controller Interface driver [ 1.927717] usbcore: registered new interface driver usblp [ 1.927957] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.930660] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.930797] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.931066] mousedev: PS/2 mouse device common for all mice [ 1.931490] cpuidle: using governor ladder [ 1.932826] usbcore: registered new interface driver usbhid [ 1.932962] usbhid: USB HID core driver [ 1.933207] TCP: cubic registered [ 1.933337] NET: Registered protocol family 17 [ 1.933498] Key type dns_resolver registered [ 1.934067] registered taskstats version 1 [ 1.934684] console [netcon0] enabled [ 1.934817] netconsole: network logging started [ 1.934952] powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 1216 HE (2 cpu cores) (version 2.20.00) [ 1.935194] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.935194] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 1.937015] Freeing unused kernel memory: 896k freed [ 1.963297] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.973874] ACPI: bus type scsi registered [ 1.974246] libata version 3.00 loaded. [ 1.975072] sata_svw 0000:01:0e.0: version 2.3 [ 1.975795] scsi0 : sata_svw [ 1.976068] scsi1 : sata_svw [ 1.976319] scsi2 : sata_svw [ 1.976558] scsi3 : sata_svw [ 1.976777] ata1: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe000 irq 11 [ 1.976989] ata2: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe100 irq 11 [ 1.977220] ata3: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe200 irq 11 [ 1.977431] ata4: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe300 irq 11 [ 2.292358] ata1: SATA link down (SStatus 4 SControl 300) [ 2.607356] ata2: SATA link down (SStatus 4 SControl 300) [ 2.922357] ata3: SATA link down (SStatus 4 SControl 300) [ 3.111224] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 3.237355] ata4: SATA link down (SStatus 4 SControl 300) [ 3.241336] Fusion MPT base driver 3.04.20 [ 3.241472] Copyright (c) 1999-2008 LSI Corporation [ 3.247145] Fusion MPT SAS Host driver 3.04.20 [ 3.247424] mptbase: ioc0: Initiating bringup [ 3.525010] ioc0: LSISAS1068 B0: Capabilities={Initiator} [ 25.212055] scsi4 : ioc0: LSISAS1068 B0, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=20 [ 25.253360] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c500070dc515 [ 25.254645] scsi 4:0:0:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.257130] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 25.260189] sd 4:0:0:0: [sda] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.260811] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c500070dac45 [ 25.262091] scsi 4:0:1:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.262601] sd 4:0:0:0: [sda] Write Protect is off [ 25.262737] sd 4:0:0:0: [sda] Mode Sense: b3 00 10 08 [ 25.264536] sd 4:0:1:0: Attached scsi generic sg1 type 0 [ 25.267093] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.267825] sd 4:0:1:0: [sdb] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.268454] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x5000c500070dc391 [ 25.271628] scsi 4:0:2:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.272240] sd 4:0:1:0: [sdb] Write Protect is off [ 25.272375] sd 4:0:1:0: [sdb] Mode Sense: b3 00 10 08 [ 25.274064] sd 4:0:2:0: Attached scsi generic sg2 type 0 [ 25.276614] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.277340] sd 4:0:2:0: [sdc] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.277967] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x5000c500070daf29 [ 25.278221] sda: sda1 sda2 sda3 [ 25.283264] scsi 4:0:3:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.283278] sd 4:0:2:0: [sdc] Write Protect is off [ 25.283280] sd 4:0:2:0: [sdc] Mode Sense: b3 00 10 08 [ 25.284978] sd 4:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.285842] sd 4:0:3:0: Attached scsi generic sg3 type 0 [ 25.290384] sd 4:0:0:0: [sda] Attached SCSI disk [ 25.290857] sd 4:0:3:0: [sdd] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.291486] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 4, phy 4, sas_addr 0x5000c500070dc0c1 [ 25.292750] scsi 4:0:4:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.293278] sd 4:0:3:0: [sdd] Write Protect is off [ 25.293425] sd 4:0:3:0: [sdd] Mode Sense: b3 00 10 08 [ 25.293428] sdb: sdb1 sdb2 [ 25.295213] sd 4:0:4:0: Attached scsi generic sg4 type 0 [ 25.297276] sd 4:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.298835] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 5, phy 5, sas_addr 0x5000c500070daa9d [ 25.303086] sd 4:0:4:0: [sde] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.303490] scsi 4:0:5:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.305054] sd 4:0:1:0: [sdb] Attached SCSI disk [ 25.305696] sd 4:0:4:0: [sde] Write Protect is off [ 25.305833] sd 4:0:4:0: [sde] Mode Sense: b3 00 10 08 [ 25.305905] sd 4:0:5:0: Attached scsi generic sg5 type 0 [ 25.305920] sdc: sdc1 sdc2 sdc3 [ 25.311848] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 7, phy 6, sas_addr 0x5000c500070dc1e5 [ 25.311883] sd 4:0:4:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.311900] sd 4:0:5:0: [sdf] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.315388] scsi 4:0:6:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.315610] sd 4:0:5:0: [sdf] Write Protect is off [ 25.315752] sd 4:0:5:0: [sdf] Mode Sense: b3 00 10 08 [ 25.317613] sdd: sdd1 sdd2 [ 25.317855] sd 4:0:6:0: Attached scsi generic sg6 type 0 [ 25.318399] sd 4:0:5:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.318404] sd 4:0:2:0: [sdc] Attached SCSI disk [ 25.323688] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 8, phy 7, sas_addr 0x5000c5000128ff31 [ 25.323700] sd 4:0:6:0: [sdg] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.326840] scsi 4:0:7:0: Direct-Access SEAGATE ST373455SS 0004 PQ: 0 ANSI: 5 [ 25.327495] sd 4:0:6:0: [sdg] Write Protect is off [ 25.327631] sd 4:0:6:0: [sdg] Mode Sense: b3 00 10 08 [ 25.329266] sd 4:0:7:0: Attached scsi generic sg7 type 0 [ 25.329821] sd 4:0:6:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.332024] sd 4:0:3:0: [sdd] Attached SCSI disk [ 25.332097] sde: sde1 [ 25.332324] sd 4:0:7:0: [sdh] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.338712] sd 4:0:7:0: [sdh] Write Protect is off [ 25.338846] sd 4:0:7:0: [sdh] Mode Sense: b3 00 10 08 [ 25.339140] sdf: sdf1 [ 25.342210] sd 4:0:7:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.343236] sd 4:0:4:0: [sde] Attached SCSI disk [ 25.347993] sd 4:0:5:0: [sdf] Attached SCSI disk [ 25.349140] sdh: sdh1 [ 25.349688] sdg: sdg1 [ 25.357819] sd 4:0:7:0: [sdh] Attached SCSI disk [ 25.358377] sd 4:0:6:0: [sdg] Attached SCSI disk [ 25.383026] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 25.390772] fuse init (API version 7.20) [ 25.403289] md: linear personality registered for level -1 [ 25.408502] md: raid0 personality registered for level 0 [ 25.411819] md: raid1 personality registered for level 1 [ 25.414570] async_tx: api initialized (async) [ 25.415378] xor: automatically using best checksumming function: [ 25.425011] generic_sse: 7312.000 MB/sec [ 25.445031] raid6: sse2x1 3378 MB/s [ 25.462015] raid6: sse2x2 4421 MB/s [ 25.479015] raid6: sse2x4 4562 MB/s [ 25.479145] raid6: using algorithm sse2x4 (4562 MB/s) [ 25.479278] raid6: using intx1 recovery algorithm [ 25.482072] md: raid6 personality registered for level 6 [ 25.482212] md: raid5 personality registered for level 5 [ 25.482345] md: raid4 personality registered for level 4 [ 25.509196] udevd (1599): /proc/1599/oom_adj is deprecated, please use /proc/1599/oom_score_adj instead. [ 25.765804] tg3.c:v3.124 (March 21, 2012) [ 25.773501] tg3 0000:02:03.0: eth0: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:30:48:63:8b:6e [ 25.773725] tg3 0000:02:03.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 25.773942] tg3 0000:02:03.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0] [ 25.774168] tg3 0000:02:03.0: eth0: dma_rwctrl[769f0000] dma_mask[64-bit] [ 25.798320] tg3 0000:02:03.1: eth1: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:30:48:63:8b:6f [ 25.798545] tg3 0000:02:03.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 25.798762] tg3 0000:02:03.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 25.798977] tg3 0000:02:03.1: eth1: dma_rwctrl[769f0000] dma_mask[64-bit] [ 25.806337] piix4_smbus 0000:00:02.0: SMBus Host Controller at 0x580, revision 0 [ 25.810987] EDAC MC: Ver: 3.0.0 [ 25.811213] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 25.816782] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 25.831382] AMD64 EDAC driver v3.4.0 [ 25.841347] EDAC amd64: DRAM ECC enabled. [ 25.841490] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 0, MCG_CTL: 0x1f, NB MSR is enabled [ 25.841492] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 1, MCG_CTL: 0x1f, NB MSR is enabled [ 25.841495] EDAC amd64: K8 revF or later detected (node 0). [ 25.841636] EDAC DEBUG: reserve_mc_sibling_devs: F1: 0000:00:18.1 [ 25.841638] EDAC DEBUG: reserve_mc_sibling_devs: F2: 0000:00:18.2 [ 25.841639] EDAC DEBUG: reserve_mc_sibling_devs: F3: 0000:00:18.3 [ 25.841640] EDAC DEBUG: read_mc_regs: TOP_MEM: 0x00000000ee000000 [ 25.841642] EDAC DEBUG: read_mc_regs: TOP_MEM2: 0x0000000112000000 [ 25.841645] EDAC DEBUG: read_mc_regs: DRAM range[0], base: 0x0000000000000000; limit: 0x0000000111ffffff [ 25.841647] EDAC DEBUG: read_mc_regs: IntlvEn=Disabled; Range access: RW IntlvSel=0 DstNode=0 [ 25.841651] EDAC DEBUG: read_dct_base_mask: DCSB0[0]=0x00000001 reg: F2x40 [ 25.841653] EDAC DEBUG: read_dct_base_mask: DCSB0[1]=0x00000101 reg: F2x44 [ 25.841655] EDAC DEBUG: read_dct_base_mask: DCSB0[2]=0x00000201 reg: F2x48 [ 25.841657] EDAC DEBUG: read_dct_base_mask: DCSB0[3]=0x00000301 reg: F2x4c [ 25.841659] EDAC DEBUG: read_dct_base_mask: DCSB0[4]=0x00000000 reg: F2x50 [ 25.841660] EDAC DEBUG: read_dct_base_mask: DCSB0[5]=0x00000000 reg: F2x54 [ 25.841662] EDAC DEBUG: read_dct_base_mask: DCSB0[6]=0x00000000 reg: F2x58 [ 25.841664] EDAC DEBUG: read_dct_base_mask: DCSB0[7]=0x00000000 reg: F2x5c [ 25.841666] EDAC DEBUG: read_dct_base_mask: DCSM0[0]=0x00f83ce0 reg: F2x60 [ 25.841668] EDAC DEBUG: read_dct_base_mask: DCSM0[1]=0x00f83ce0 reg: F2x64 [ 25.841669] EDAC DEBUG: read_dct_base_mask: DCSM0[2]=0x00000000 reg: F2x68 [ 25.841671] EDAC DEBUG: read_dct_base_mask: DCSM0[3]=0x00000000 reg: F2x6c [ 25.841674] EDAC DEBUG: dump_misc_regs: F3xE8 (NB Cap): 0x00001719 [ 25.841675] EDAC DEBUG: dump_misc_regs: NB two channel DRAM capable: yes [ 25.841676] EDAC DEBUG: dump_misc_regs: ECC capable: yes, ChipKill ECC capable: yes [ 25.841678] EDAC DEBUG: amd64_dump_dramcfg_low: F2x090 (DRAM Cfg Low): 0x00090810 [ 25.841679] EDAC DEBUG: amd64_dump_dramcfg_low: DIMM type: unbuffered; all DIMMs support ECC: yes [ 25.841681] EDAC DEBUG: amd64_dump_dramcfg_low: PAR/ERR parity: disabled [ 25.841682] EDAC DEBUG: amd64_dump_dramcfg_low: x4 logical DIMMs present: L0: no L1: no L2: no L3: no [ 25.841684] EDAC DEBUG: dump_misc_regs: F3xB0 (Online Spare): 0x0f000000 [ 25.841686] EDAC DEBUG: dump_misc_regs: F1xF0 (DRAM Hole Address): 0xee001201, base: 0xee000000, offset: 0x12000000 [ 25.841687] EDAC DEBUG: dump_misc_regs: DramHoleValid: yes [ 25.841689] EDAC DEBUG: amd64_debug_display_dimm_sizes: F2x080 (DRAM Bank Address Mapping): 0x00000022 [ 25.841690] EDAC MC: DCT0 chip selects: [ 25.841692] EDAC amd64: MC: 0: 2048MB 1: 2048MB [ 25.841824] EDAC amd64: MC: 2: 2048MB 3: 2048MB [ 25.841955] EDAC amd64: MC: 4: 0MB 5: 0MB [ 25.842104] EDAC amd64: MC: 6: 0MB 7: 0MB [ 25.842239] EDAC DEBUG: edac_mc_alloc: allocating 1160 bytes for mci data (16 ranks, 16 csrows/channels) [ 25.842266] EDAC DEBUG: init_csrows: node 0, NBCFG=0x0ad00044[ChipKillEccCap: 1|DramEccEn: 1] [ 25.842267] EDAC DEBUG: amd64_csrow_nr_pages: (csrow=0) DBAM map index= 2 [ 25.842269] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel= 262144 channel-count = 2 [ 25.842271] EDAC amd64: CS0: Unbuffered DDR2 RAM [ 25.842405] EDAC DEBUG: init_csrows: for MC node 0 csrow 0: [ 25.842406] EDAC DEBUG: init_csrows: nr_pages: 524288 [ 25.842408] EDAC DEBUG: amd64_csrow_nr_pages: (csrow=1) DBAM map index= 2 [ 25.842409] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel= 262144 channel-count = 2 [ 25.842410] EDAC amd64: CS1: Unbuffered DDR2 RAM [ 25.842542] EDAC DEBUG: init_csrows: for MC node 0 csrow 1: [ 25.842543] EDAC DEBUG: init_csrows: nr_pages: 524288 [ 25.842544] EDAC DEBUG: amd64_csrow_nr_pages: (csrow=2) DBAM map index= 2 [ 25.842546] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel= 262144 channel-count = 2 [ 25.842547] EDAC amd64: CS2: Unbuffered DDR2 RAM [ 25.842679] EDAC DEBUG: init_csrows: for MC node 0 csrow 2: [ 25.842680] EDAC DEBUG: init_csrows: nr_pages: 524288 [ 25.842681] EDAC DEBUG: amd64_csrow_nr_pages: (csrow=3) DBAM map index= 2 [ 25.842683] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel= 262144 channel-count = 2 [ 25.842684] EDAC amd64: CS3: Unbuffered DDR2 RAM [ 25.842816] EDAC DEBUG: init_csrows: for MC node 0 csrow 3: [ 25.842817] EDAC DEBUG: init_csrows: nr_pages: 524288 [ 25.842819] EDAC DEBUG: init_csrows: ----CSROW 4 VALID for MC node 0 [ 25.842820] EDAC DEBUG: init_csrows: ----CSROW 5 VALID for MC node 0 [ 25.842821] EDAC DEBUG: init_csrows: ----CSROW 6 VALID for MC node 0 [ 25.842823] EDAC DEBUG: init_csrows: ----CSROW 7 VALID for MC node 0 [ 25.842824] EDAC DEBUG: edac_mc_add_mc: [ 25.842827] EDAC DEBUG: edac_create_sysfs_mci_device: creating bus mc0 [ 25.842854] EDAC DEBUG: edac_create_sysfs_mci_device: creating device mc0 [ 25.842875] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm0, located at csrow 0 channel 0 [ 25.842888] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank0 [ 25.842889] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm1, located at csrow 0 channel 1 [ 25.842900] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank1 [ 25.842901] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm2, located at csrow 1 channel 0 [ 25.842913] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank2 [ 25.842914] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm3, located at csrow 1 channel 1 [ 25.842926] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank3 [ 25.842928] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm8, located at csrow 4 channel 0 [ 25.842938] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank8 [ 25.842940] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm9, located at csrow 4 channel 1 [ 25.842950] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank9 [ 25.842952] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm10, located at csrow 5 channel 0 [ 25.842964] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank10 [ 25.842966] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm11, located at csrow 5 channel 1 [ 25.842976] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank11 [ 25.842978] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow0 [ 25.842991] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow1 [ 25.843016] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow2 [ 25.843027] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow3 [ 25.843059] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2 [ 25.843317] EDAC DEBUG: edac_pci_alloc_ctl_info: [ 25.843320] EDAC DEBUG: edac_pci_add_device: [ 25.843322] EDAC DEBUG: add_edac_pci_to_global_list: [ 25.843323] EDAC DEBUG: find_edac_pci_by_dev: [ 25.843325] EDAC DEBUG: edac_pci_create_sysfs: idx=0 [ 25.843326] EDAC DEBUG: edac_pci_main_kobj_setup: [ 25.843332] EDAC DEBUG: edac_pci_main_kobj_setup: Registered '.../edac/pci' kobject [ 25.843333] EDAC DEBUG: edac_pci_create_instance_kobj: [ 25.843337] EDAC DEBUG: edac_pci_create_instance_kobj: Register instance 'pci0' kobject [ 25.843339] EDAC DEBUG: edac_pci_workq_setup: [ 25.843343] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 28.994536] kvm: Nested Virtualization enabled [ 29.009824] microcode: AMD CPU family 0xf not supported [ 29.953049] w83793 0-002f: Registered watchdog chardev major 10, minor: 130 [ 30.121069] NET: Registered protocol family 10 [ 30.121499] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 30.121661] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.836610] Adding 4192960k swap on /dev/sdc3. Priority:-1 extents:1 across:4192960k [ 31.219162] microcode: AMD CPU family 0xf not supported [ 31.234579] microcode: AMD CPU family 0xf not supported [ 31.861807] tg3 0000:02:03.0: eth1: Link is up at 1000 Mbps, full duplex [ 31.861949] tg3 0000:02:03.0: eth1: Flow control is off for TX and off for RX [ 31.862114] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 32.449399] tg3 0000:02:03.1: eth0: Link is up at 1000 Mbps, full duplex [ 32.449543] tg3 0000:02:03.1: eth0: Flow control is off for TX and off for RX [ 32.449697] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.793912] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.490265] warning: `named' uses 32-bit capabilities (legacy support in use) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 12:38 ` Josh Hunt @ 2012-09-12 12:52 ` Josh Hunt 2012-09-12 15:30 ` Borislav Petkov 0 siblings, 1 reply; 20+ messages in thread From: Josh Hunt @ 2012-09-12 12:52 UTC (permalink / raw) To: Borislav Petkov; +Cc: linux-edac, linux-kernel On 09/12/2012 07:38 AM, Josh Hunt wrote: > On 09/12/2012 03:51 AM, Borislav Petkov wrote: >> On Tue, Sep 11, 2012 at 06:02:01PM -0500, Josh Hunt wrote: >>> On 09/11/2012 05:52 PM, Josh Hunt wrote: >>>> With recent kernels we noticed that edac was reporting double the memory size on >>>> systems running with AMD family 0Fh processors. I'm not very familiar with the >>>> code, but this resolves it from what I can see on my systems. At least in >>>> amd64_debug_display_dimm_sizes() and k8_dbam_to_chip_select() there appeared >>>> to be redundant shifts to the left by 1 when WIDTH_128 is present. >> >> Any chance you could enable CONFIG_EDAC_DEBUG, boot and send me your >> whole dmesg? Privately is fine too. >> >> Thanks. >> > > Sure. Attached. This is booting with latest git. > > Josh I wanted to add that we started seeing this back in 3.0. I didn't go back any farther, but know it was not occurring in 2.6.38. The issue in 3.0 appeared to be that we shift left k8_dbam_to_chip_select() and there was also another shift in amd64_csrow_nr_pages(). It looks like that second shift has been replaced by a more recent patch, which actually checks to see if the csrow is enabled and then counts nr_pages again adding that to the first calculation, still resulting in the size being double. Josh ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 12:52 ` Josh Hunt @ 2012-09-12 15:30 ` Borislav Petkov 2012-09-12 15:37 ` Josh Hunt 0 siblings, 1 reply; 20+ messages in thread From: Borislav Petkov @ 2012-09-12 15:30 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Wed, Sep 12, 2012 at 07:52:15AM -0500, Josh Hunt wrote: > I wanted to add that we started seeing this back in 3.0. I didn't go > back any farther, but know it was not occurring in 2.6.38. The issue > in 3.0 appeared to be that we shift left k8_dbam_to_chip_select() > and there was also another shift in amd64_csrow_nr_pages(). It looks > like that second shift has been replaced by a more recent patch, > which actually checks to see if the csrow is enabled and then counts > nr_pages again adding that to the first calculation, still resulting > in the size being double. Yes, you're basically right. Here's what I see from here: In 2009 I added commit 603adaf6b3e37450235f0ddb5986b961b3146a79 Author: Borislav Petkov <borislav.petkov@amd.com> Date: Mon Dec 21 14:52:53 2009 +0100 amd64_edac: fix K8 chip select reporting Fix the case when amd64_debug_display_dimm_sizes() reports only half the amount of DRAM on it because it doesn't account for when the single DCT operates in 128-bit mode and merges chip selects from different DIMMs. which was supposed to fix a bug-report of DRAM chip selects being halved in reporting. But, commit 41d8bfaba70311c2fa0666554ef160ea8ffc9daf Author: Borislav Petkov <borislav.petkov@amd.com> Date: Tue Jan 18 19:16:08 2011 +0100 amd64_edac: Improve DRAM address mapping Drop static tables which map the bits in F2x80 to a chip select size in favor of functions doing the mapping with some bit fiddling. Also, add F15 support. two years later reworked the whole DBAM to chip select sizes mapping for all families. But it left in the clumsy workaround above for K8 only, thus the double shifting. So, long story short, reverting 603adaf6b3e37450235f0ddb5986b961b3146a79 should probably fix the issue since it is not needed anymore. Let me run it here to make sure I'm not missing anything else. Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 15:30 ` Borislav Petkov @ 2012-09-12 15:37 ` Josh Hunt 2012-09-12 15:49 ` Borislav Petkov 0 siblings, 1 reply; 20+ messages in thread From: Josh Hunt @ 2012-09-12 15:37 UTC (permalink / raw) To: Borislav Petkov; +Cc: linux-edac, linux-kernel On 09/12/2012 10:30 AM, Borislav Petkov wrote: > Yes, you're basically right. Here's what I see from here: > > In 2009 I added > > commit 603adaf6b3e37450235f0ddb5986b961b3146a79 > Author: Borislav Petkov <borislav.petkov@amd.com> > Date: Mon Dec 21 14:52:53 2009 +0100 > > amd64_edac: fix K8 chip select reporting > > Fix the case when amd64_debug_display_dimm_sizes() reports only half the > amount of DRAM on it because it doesn't account for when the single DCT > operates in 128-bit mode and merges chip selects from different DIMMs. > > which was supposed to fix a bug-report of DRAM chip selects being halved > in reporting. > > But, > > commit 41d8bfaba70311c2fa0666554ef160ea8ffc9daf > Author: Borislav Petkov <borislav.petkov@amd.com> > Date: Tue Jan 18 19:16:08 2011 +0100 > > amd64_edac: Improve DRAM address mapping > > Drop static tables which map the bits in F2x80 to a chip select size in > favor of functions doing the mapping with some bit fiddling. Also, add > F15 support. > > > two years later reworked the whole DBAM to chip select sizes mapping for > all families. But it left in the clumsy workaround above for K8 only, > thus the double shifting. > > So, long story short, reverting 603adaf6b3e37450235f0ddb5986b961b3146a79 > should probably fix the issue since it is not needed anymore. > > Let me run it here to make sure I'm not missing anything else. > > Thanks. > Well from what I see 603ad... would only fix the case of printing the values correctly on boot, by removing the factor=1 shift. However, that is merely cosmetic as it does not affect the actual calculation of nr_pages. I guess maybe I wasn't completely clear before, but I see the doubling of the amount of memory both on boot via dmesg, but also in /sys/devices/system/edac/mc/mc0/size_mb and all of the csrow* subdirs therein. Josh ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 15:37 ` Josh Hunt @ 2012-09-12 15:49 ` Borislav Petkov 2012-09-12 16:23 ` Josh Hunt 0 siblings, 1 reply; 20+ messages in thread From: Borislav Petkov @ 2012-09-12 15:49 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Wed, Sep 12, 2012 at 10:37:18AM -0500, Josh Hunt wrote: > Well from what I see 603ad... would only fix the case of printing the > values correctly on boot, by removing the factor=1 shift. However, > that is merely cosmetic as it does not affect the actual calculation > of nr_pages. I guess maybe I wasn't completely clear before, but I > see the doubling of the amount of memory both on boot via dmesg, but > also in /sys/devices/system/edac/mc/mc0/size_mb and all of the csrow* > subdirs therein. Yes, that's because the whole init_csrows thing has been b0rked since forever. In your case, amd64_csrow_nr_pages() should pay attention to the dct (second argument) which on K8 is always 0 (we have only one DCT aka Dram ConTroller on K8) and the function should return 0 if dct is 1. But the whole loop in init_csrows is fishy too so I'll need to rework that properly. Oh well... Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 15:49 ` Borislav Petkov @ 2012-09-12 16:23 ` Josh Hunt 2012-09-12 16:48 ` Borislav Petkov 0 siblings, 1 reply; 20+ messages in thread From: Josh Hunt @ 2012-09-12 16:23 UTC (permalink / raw) To: Borislav Petkov; +Cc: linux-edac, linux-kernel On 09/12/2012 10:49 AM, Borislav Petkov wrote: > > Yes, that's because the whole init_csrows thing has been b0rked since > forever. In your case, amd64_csrow_nr_pages() should pay attention to > the dct (second argument) which on K8 is always 0 (we have only one DCT > aka Dram ConTroller on K8) and the function should return 0 if dct is 1. > But the whole loop in init_csrows is fishy too so I'll need to rework > that properly. Oh well... > Looks like we're seeing an issue on another machine. Still 0Fh family, but the model is reported as 2, with cs_mode 7. This causes the machine to report that it has 32GB memory instead of 4GB. For this issue it seems like the shift logic is incorrect. Looking at the old ddr2_dbam_revD table it doesn't really lend itself to shifting very easily. Perhaps something like this (albeit very ugly - it matches the old table): /* 3 to 5 */ if ( cs_mode > 2 && cs_mode < 6 ) return 32 << (cs_mode - 1); /* 6 to 8 */ else if ( cs_mode > 5 && cs_mode < 9 ) return 32 << (cs_mode - 3); /* 9 and 10 */ else if ( cs_mode > 8 ) return 32 << (cs_mode - 4); /* 0 to 3 */ else return 32 << cs_mode; Josh ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 16:23 ` Josh Hunt @ 2012-09-12 16:48 ` Borislav Petkov 2012-09-12 16:58 ` Josh Hunt 0 siblings, 1 reply; 20+ messages in thread From: Borislav Petkov @ 2012-09-12 16:48 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Wed, Sep 12, 2012 at 11:23:36AM -0500, Josh Hunt wrote: > Looks like we're seeing an issue on another machine. Still 0Fh family, > but the model is reported as 2, with cs_mode 7. Can I have /proc/cpuinfo and full dmesg with EDAC_DEBUG enabled from that machine please? Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 16:48 ` Borislav Petkov @ 2012-09-12 16:58 ` Josh Hunt 2012-09-12 17:06 ` Borislav Petkov 0 siblings, 1 reply; 20+ messages in thread From: Josh Hunt @ 2012-09-12 16:58 UTC (permalink / raw) To: Borislav Petkov; +Cc: linux-edac, linux-kernel On 09/12/2012 11:48 AM, Borislav Petkov wrote: > Can I have /proc/cpuinfo and full dmesg with EDAC_DEBUG enabled from > that machine please? > Actually my apologies. I was looking at the 3.0 code. This issue is fixed in the latest kernel. Sorry for the noise on that. Josh ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 16:58 ` Josh Hunt @ 2012-09-12 17:06 ` Borislav Petkov 2012-09-12 17:23 ` Borislav Petkov 0 siblings, 1 reply; 20+ messages in thread From: Borislav Petkov @ 2012-09-12 17:06 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Wed, Sep 12, 2012 at 11:58:07AM -0500, Josh Hunt wrote: > Actually my apologies. I was looking at the 3.0 code. This issue is > fixed in the latest kernel. > > Sorry for the noise on that. That's fine. I'm happy you guys are testing this and reporting issues so thanks anyway. I'll ping you when I have something ready to test for the number of pages per csrow reporting. Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 17:06 ` Borislav Petkov @ 2012-09-12 17:23 ` Borislav Petkov 2012-09-14 12:55 ` Josh Hunt 0 siblings, 1 reply; 20+ messages in thread From: Borislav Petkov @ 2012-09-12 17:23 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Wed, Sep 12, 2012 at 07:06:29PM +0200, Borislav Petkov wrote: > I'll ping you when I have something ready to test for the number of > pages per csrow reporting. Ok, I have something preliminary which seems to work fine on my K8 here. If you'd like, you can give it a run: git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git error-queue I've changed also debug messages, etc, so pls take a look at those and let me know whether they're understandable, make sense, etc, etc. Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-12 17:23 ` Borislav Petkov @ 2012-09-14 12:55 ` Josh Hunt 2012-09-14 14:39 ` Josh Hunt 0 siblings, 1 reply; 20+ messages in thread From: Josh Hunt @ 2012-09-14 12:55 UTC (permalink / raw) To: Borislav Petkov; +Cc: linux-edac, linux-kernel On 09/12/2012 12:23 PM, Borislav Petkov wrote: > Ok, I have something preliminary which seems to work fine on my K8 here. > If you'd like, you can give it a run: > > git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git error-queue > > I've changed also debug messages, etc, so pls take a look at those and > let me know whether they're understandable, make sense, etc, etc. Boris Thanks to your help I was able to test your branch, but it still does not resolve the problem. Removal of the "factor=1" workaround fixes the memory size reporting on boot, but the sysfs values are still incorrect. [ 25.836264] EDAC MC: DCT0 chip selects: [ 25.836266] EDAC amd64: MC: 0: 1024MB 1: 1024MB [ 25.836398] EDAC amd64: MC: 2: 1024MB 3: 1024MB [ 25.836530] EDAC amd64: MC: 4: 0MB 5: 0MB [ 25.836662] EDAC amd64: MC: 6: 0MB 7: 0MB root@192.168.1.1:/sys/devices/system/edac/mc/mc0# grep . * ce_count:0 ce_noinfo_count:0 dbam:0x0000000000000022 dhar:0x00000000ee001201 dram_hole:ee000000 12000000 12000000 max_location:csrow 7 channel 1 mc_name:K8 grep: reset_counters: Permission denied sdram_scrub_rate:761 seconds_since_reset:276 size_mb:8192 topmem:0x00000000ee000000 topmem2:0x0000000112000000 ue_count:0 ue_noinfo_count:0 root@192.168.1.1:/sys/devices/system/edac/mc/mc0/csrow1# grep . * ce_count:0 ch0_ce_count:0 ch0_dimm_label:mc#0csrow#0channel#1 ch1_ce_count:0 ch1_dimm_label:mc#0csrow#4channel#1 dev_type:Unknown edac_mode:S4ECD4ED mem_type:Unbuffered-DDR2 size_mb:2048 ue_count:0 To be sure I'm using the correct branch the last git log entry is: 9d67117feece8852570cc8ee25b68c41f8def323 I could be incorrect, but I still think there's a problem with either a) ddr2_cs_size() for this cpu, or b) the extra shift left when WIDTH_128 is true. Josh ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-14 12:55 ` Josh Hunt @ 2012-09-14 14:39 ` Josh Hunt 2012-09-14 15:40 ` Borislav Petkov 2012-09-21 12:36 ` Borislav Petkov 0 siblings, 2 replies; 20+ messages in thread From: Josh Hunt @ 2012-09-14 14:39 UTC (permalink / raw) To: Borislav Petkov; +Cc: linux-edac, linux-kernel On 09/14/2012 07:55 AM, Josh Hunt wrote: > > Thanks to your help I was able to test your branch, but it still does > not resolve the problem. Removal of the "factor=1" workaround fixes the > memory size reporting on boot, but the sysfs values are still incorrect. > Please disregard what I said earlier about the shift still being wrong. Looking at the dmesg more I see now that the # of pages are correctly reported (262144), however sysfs is still wrong. [ 25.837588] EDAC DEBUG: init_csrows: MC node: 0, csrow: 0 [ 25.837589] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 0, channel: 0, DBAM idx: 2 [ 25.837591] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.837592] EDAC amd64: CS0: Unbuffered DDR2 RAM [ 25.837724] EDAC DEBUG: init_csrows: Total csrow0 pages: 262144 [ 25.837725] DBG: init_csrows: channel_count:2 [ 25.837856] DBG: init_csrows: channel_count:2 [ 25.837988] EDAC DEBUG: init_csrows: MC node: 0, csrow: 1 [ 25.837989] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 1, channel: 0, DBAM idx: 2 [ 25.837991] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.837992] EDAC amd64: CS1: Unbuffered DDR2 RAM [ 25.838157] EDAC DEBUG: init_csrows: Total csrow1 pages: 262144 [ 25.838158] DBG: init_csrows: channel_count:2 [ 25.838289] DBG: init_csrows: channel_count:2 [ 25.838421] EDAC DEBUG: init_csrows: MC node: 0, csrow: 2 [ 25.838422] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: 0, DBAM idx: 2 [ 25.838424] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.838425] EDAC amd64: CS2: Unbuffered DDR2 RAM [ 25.838556] EDAC DEBUG: init_csrows: Total csrow2 pages: 262144 [ 25.838558] DBG: init_csrows: channel_count:2 [ 25.838689] DBG: init_csrows: channel_count:2 [ 25.838820] EDAC DEBUG: init_csrows: MC node: 0, csrow: 3 [ 25.838822] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: 0, DBAM idx: 2 [ 25.838823] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.838824] EDAC amd64: CS3: Unbuffered DDR2 RAM [ 25.838957] EDAC DEBUG: init_csrows: Total csrow3 pages: 262144 I looked into this and see that sysfs is doing the double counting b/c it loops over the # of channels: [ 131.423949] DBG: csrow_size_show: i:0 nr_pages:262144 nr_channels:2 [ 131.424112] DBG: csrow_size_show: i:1 nr_pages:524288 nr_channels:2 I verified this in init_csrows: [ 25.838958] DBG: init_csrows: channel_count:2 Since I don't know the details of the hardware here it's hard for me to suggest a fix, but it would seem that k8_early_channel_count() needs to be modified to only return 1 in this case? Josh ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-14 14:39 ` Josh Hunt @ 2012-09-14 15:40 ` Borislav Petkov 2012-09-21 12:36 ` Borislav Petkov 1 sibling, 0 replies; 20+ messages in thread From: Borislav Petkov @ 2012-09-14 15:40 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Fri, Sep 14, 2012 at 09:39:00AM -0500, Josh Hunt wrote: > On 09/14/2012 07:55 AM, Josh Hunt wrote: > > > >Thanks to your help I was able to test your branch, but it still does > >not resolve the problem. Removal of the "factor=1" workaround fixes the > >memory size reporting on boot, but the sysfs values are still incorrect. > > > > Please disregard what I said earlier about the shift still being > wrong. Looking at the dmesg more I see now that the # of pages are > correctly reported (262144), however sysfs is still wrong. > > [ 25.837588] EDAC DEBUG: init_csrows: MC node: 0, csrow: 0 > [ 25.837589] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 0, channel: > 0, DBAM idx: 2 > [ 25.837591] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 > [ 25.837592] EDAC amd64: CS0: Unbuffered DDR2 RAM > [ 25.837724] EDAC DEBUG: init_csrows: Total csrow0 pages: 262144 > [ 25.837725] DBG: init_csrows: channel_count:2 > [ 25.837856] DBG: init_csrows: channel_count:2 > [ 25.837988] EDAC DEBUG: init_csrows: MC node: 0, csrow: 1 > [ 25.837989] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 1, channel: > 0, DBAM idx: 2 > [ 25.837991] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 > [ 25.837992] EDAC amd64: CS1: Unbuffered DDR2 RAM > [ 25.838157] EDAC DEBUG: init_csrows: Total csrow1 pages: 262144 > [ 25.838158] DBG: init_csrows: channel_count:2 > [ 25.838289] DBG: init_csrows: channel_count:2 > [ 25.838421] EDAC DEBUG: init_csrows: MC node: 0, csrow: 2 > [ 25.838422] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: > 0, DBAM idx: 2 > [ 25.838424] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 > [ 25.838425] EDAC amd64: CS2: Unbuffered DDR2 RAM > [ 25.838556] EDAC DEBUG: init_csrows: Total csrow2 pages: 262144 > [ 25.838558] DBG: init_csrows: channel_count:2 > [ 25.838689] DBG: init_csrows: channel_count:2 > [ 25.838820] EDAC DEBUG: init_csrows: MC node: 0, csrow: 3 > [ 25.838822] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: > 0, DBAM idx: 2 > [ 25.838823] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 > [ 25.838824] EDAC amd64: CS3: Unbuffered DDR2 RAM > [ 25.838957] EDAC DEBUG: init_csrows: Total csrow3 pages: 262144 > > I looked into this and see that sysfs is doing the double counting > b/c it loops over the # of channels: > > [ 131.423949] DBG: csrow_size_show: i:0 nr_pages:262144 nr_channels:2 > [ 131.424112] DBG: csrow_size_show: i:1 nr_pages:524288 nr_channels:2 > > I verified this in init_csrows: > [ 25.838958] DBG: init_csrows: channel_count:2 > > Since I don't know the details of the hardware here it's hard for me > to suggest a fix, but it would seem that k8_early_channel_count() > needs to be modified to only return 1 in this case? Yeah, there are still some issues after the whole change to per-dimm accounting came in. I'm looking into it. Thanks for testing and reporting. If you see anything else out of the ordinary, let me know too so that I can fix it. Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-14 14:39 ` Josh Hunt 2012-09-14 15:40 ` Borislav Petkov @ 2012-09-21 12:36 ` Borislav Petkov 2012-09-21 13:02 ` Josh Hunt 1 sibling, 1 reply; 20+ messages in thread From: Borislav Petkov @ 2012-09-21 12:36 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Fri, Sep 14, 2012 at 09:39:00AM -0500, Josh Hunt wrote: > On 09/14/2012 07:55 AM, Josh Hunt wrote: > > > >Thanks to your help I was able to test your branch, but it still does > >not resolve the problem. Removal of the "factor=1" workaround fixes the > >memory size reporting on boot, but the sysfs values are still incorrect. > > > > Please disregard what I said earlier about the shift still being > wrong. Looking at the dmesg more I see now that the # of pages are > correctly reported (262144), however sysfs is still wrong. > > [ 25.837588] EDAC DEBUG: init_csrows: MC node: 0, csrow: 0 > [ 25.837589] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 0, channel: > 0, DBAM idx: 2 > [ 25.837591] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 > [ 25.837592] EDAC amd64: CS0: Unbuffered DDR2 RAM > [ 25.837724] EDAC DEBUG: init_csrows: Total csrow0 pages: 262144 > [ 25.837725] DBG: init_csrows: channel_count:2 > [ 25.837856] DBG: init_csrows: channel_count:2 > [ 25.837988] EDAC DEBUG: init_csrows: MC node: 0, csrow: 1 > [ 25.837989] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 1, channel: > 0, DBAM idx: 2 > [ 25.837991] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 > [ 25.837992] EDAC amd64: CS1: Unbuffered DDR2 RAM > [ 25.838157] EDAC DEBUG: init_csrows: Total csrow1 pages: 262144 > [ 25.838158] DBG: init_csrows: channel_count:2 > [ 25.838289] DBG: init_csrows: channel_count:2 > [ 25.838421] EDAC DEBUG: init_csrows: MC node: 0, csrow: 2 > [ 25.838422] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: > 0, DBAM idx: 2 > [ 25.838424] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 > [ 25.838425] EDAC amd64: CS2: Unbuffered DDR2 RAM > [ 25.838556] EDAC DEBUG: init_csrows: Total csrow2 pages: 262144 > [ 25.838558] DBG: init_csrows: channel_count:2 > [ 25.838689] DBG: init_csrows: channel_count:2 > [ 25.838820] EDAC DEBUG: init_csrows: MC node: 0, csrow: 3 > [ 25.838822] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: > 0, DBAM idx: 2 > [ 25.838823] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 > [ 25.838824] EDAC amd64: CS3: Unbuffered DDR2 RAM > [ 25.838957] EDAC DEBUG: init_csrows: Total csrow3 pages: 262144 > > I looked into this and see that sysfs is doing the double counting > b/c it loops over the # of channels: > > [ 131.423949] DBG: csrow_size_show: i:0 nr_pages:262144 nr_channels:2 > [ 131.424112] DBG: csrow_size_show: i:1 nr_pages:524288 nr_channels:2 > > I verified this in init_csrows: > [ 25.838958] DBG: init_csrows: channel_count:2 > > Since I don't know the details of the hardware here it's hard for me > to suggest a fix, but it would seem that k8_early_channel_count() > needs to be modified to only return 1 in this case? Ok, I think this is still the old code you're looking at so it would be cool if you could test with my patchset I sent you last week. Because with it, it all looks fine on my K8 here: It has 2 2048MB single-ranked DIMMs on each node and edac output looks like this: [ 52.920302] EDAC DEBUG: amd64_debug_display_dimm_sizes: F2x080 (DRAM Bank Address Mapping): 0x00000060 [ 52.920302] EDAC MC: DCT0 chip selects: [ 52.920304] EDAC amd64: MC: 0: 0MB 1: 0MB [ 52.920305] EDAC amd64: MC: 2: 2048MB 3: 2048MB [ 52.920306] EDAC amd64: MC: 4: 0MB 5: 0MB [ 52.920308] EDAC amd64: MC: 6: 0MB 7: 0MB ... [ 52.920344] EDAC DEBUG: init_csrows: node 1, NBCFG=0x0ad00044[ChipKillEccCap: 1|DramEccEn: 1] [ 52.920345] EDAC DEBUG: init_csrows: MC node: 1, csrow: 2 [ 52.920346] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: 0, DBAM idx: 6 [ 52.920347] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 524288 [ 52.920348] EDAC amd64: CS2: Registered DDR2 RAM [ 52.920350] EDAC DEBUG: init_csrows: Total csrow2 pages: 524288 [ 52.920351] EDAC DEBUG: init_csrows: MC node: 1, csrow: 3 [ 52.920352] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: 0, DBAM idx: 6 [ 52.920353] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 524288 [ 52.920354] EDAC amd64: CS3: Registered DDR2 RAM [ 52.920355] EDAC DEBUG: init_csrows: Total csrow3 pages: 524288 $ cat /sys/devices/system/edac/mc/mc0/csrow2/size_mb 2048 $ cat /sys/devices/system/edac/mc/mc0/csrow3/size_mb 2048 So what am I missing? Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-21 12:36 ` Borislav Petkov @ 2012-09-21 13:02 ` Josh Hunt 2012-09-21 14:01 ` Borislav Petkov 0 siblings, 1 reply; 20+ messages in thread From: Josh Hunt @ 2012-09-21 13:02 UTC (permalink / raw) To: Borislav Petkov; +Cc: linux-edac, linux-kernel [-- Attachment #1: Type: text/plain, Size: 3166 bytes --] On 09/21/2012 07:36 AM, Borislav Petkov wrote: > Ok, I think this is still the old code you're looking at so it would be > cool if you could test with my patchset I sent you last week. > > Because with it, it all looks fine on my K8 here: > > It has 2 2048MB single-ranked DIMMs on each node and edac output looks > like this: > > [ 52.920302] EDAC DEBUG: amd64_debug_display_dimm_sizes: F2x080 (DRAM Bank Address Mapping): 0x00000060 > [ 52.920302] EDAC MC: DCT0 chip selects: > [ 52.920304] EDAC amd64: MC: 0: 0MB 1: 0MB > [ 52.920305] EDAC amd64: MC: 2: 2048MB 3: 2048MB > [ 52.920306] EDAC amd64: MC: 4: 0MB 5: 0MB > [ 52.920308] EDAC amd64: MC: 6: 0MB 7: 0MB > > ... > > [ 52.920344] EDAC DEBUG: init_csrows: node 1, NBCFG=0x0ad00044[ChipKillEccCap: 1|DramEccEn: 1] > [ 52.920345] EDAC DEBUG: init_csrows: MC node: 1, csrow: 2 > [ 52.920346] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: 0, DBAM idx: 6 > [ 52.920347] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 524288 > [ 52.920348] EDAC amd64: CS2: Registered DDR2 RAM > [ 52.920350] EDAC DEBUG: init_csrows: Total csrow2 pages: 524288 > [ 52.920351] EDAC DEBUG: init_csrows: MC node: 1, csrow: 3 > [ 52.920352] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: 0, DBAM idx: 6 > [ 52.920353] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 524288 > [ 52.920354] EDAC amd64: CS3: Registered DDR2 RAM > [ 52.920355] EDAC DEBUG: init_csrows: Total csrow3 pages: 524288 > > $ cat /sys/devices/system/edac/mc/mc0/csrow2/size_mb > 2048 > $ cat /sys/devices/system/edac/mc/mc0/csrow3/size_mb > 2048 > > So what am I missing? > > Thanks. I'm running with your edac-queue branch with the last commit being: 9d67117feece8852570cc8ee25b68c41f8def323 You can verify this with my dmesg (also attached) showing the new dbg messages added: <patch> + edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n", + csrow_nr, dct, cs_mode); + edac_dbg(0, "nr_pages/channel: %u\n", nr_pages); </patch> <dmesg> [ 25.838822] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: 0, DBAM idx: 2 [ 25.838823] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 </dmesg> Please let me know if this is the wrong version and I can rerun with the correct one. Here's what I see in sysfs: root@x.x.x.x:/sys/devices/system/edac/mc/mc0# grep . csrow*/size_mb csrow0/size_mb:2048 csrow1/size_mb:2048 csrow2/size_mb:2048 csrow3/size_mb:2048 Here's what free reports: root@x.x.x.x:/sys/devices/system/edac/mc/mc0# free total used free shared buffers cached Mem: 4057308 159300 3898008 0 3972 79048 -/+ buffers/cache: 76280 3981028 Swap: 4192960 0 4192960 IIRC the issue I was pointing out in my last mail is the code detected 2 channels on my system. Which appeared to lead to double counting in the sysfs code. The channel detection code in k8_early_channel_count() returns 2 when WIDTH_128 is set. If you're seeing it behave correctly on your system I wonder if the WIDTH_128 bit is true for your machine? Josh [-- Attachment #2: dmesg.log --] [-- Type: text/x-log, Size: 56940 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-rc5+ (johunt@kernelsuite-780) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #1 SMP Thu Sep 13 16:55:28 PDT 2012 [ 0.000000] Command line: root=UUID=dac98d66-8aaa-44c4-bcc8-4804e0bb31f1 ro oops=panic panic=30 INIT_VERBOSE=yes init=/sbin/init processor.max_cstate=1 reboot_type=1 nmi_watchdog=2,120 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000edfeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000edff0000-0x00000000edffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000edffe000-0x00000000edffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec02fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000111ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Supermicro H8SSL-I2/H8SSL-I2, BIOS 080011 09/05/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x112000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF00000000 write-back [ 0.000000] 1 base 0100000000 mask FFF0000000 write-back [ 0.000000] 2 base 0110000000 mask FFFE000000 write-back [ 0.000000] 3 base 00EE000000 mask FFFE000000 uncachable [ 0.000000] 4 base 00F0000000 mask FFF0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000112000000 aka 4384M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xee000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xedff0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xedfeffff] [ 0.000000] [mem 0x00000000-0xeddfffff] page 2M [ 0.000000] [mem 0xede00000-0xedfeffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xedfeffff @ [mem 0x1f88b000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x111ffffff] [ 0.000000] [mem 0x100000000-0x111ffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x111ffffff @ [mem 0xedfea000-0xedfeffff] [ 0.000000] RAMDISK: [mem 0x37510000-0x37feffff] [ 0.000000] ACPI: RSDP 00000000000f9e40 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000edff0000 00030 (v01 A M I OEMRSDT 09000705 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000edff0200 00084 (v02 A M I OEMFACP 09000705 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000edff0410 030C5 (v01 1SSL2 1SSL2005 00000005 INTL 02002026) [ 0.000000] ACPI: FACS 00000000edffe000 00040 [ 0.000000] ACPI: APIC 00000000edff0390 00076 (v01 A M I OEMAPIC 09000705 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000edffe040 00056 (v01 A M I AMI_OEM 09000705 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000111ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x111ffffff] [ 0.000000] NODE_DATA [mem 0x111ffc000-0x111ffffff] [ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff88010d400000-ffff880110ffffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x111ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xedfeffff] [ 0.000000] node 0: [mem 0x100000000-0x111ffffff] [ 0.000000] On node 0 totalpages: 1048447 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 8 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 956456 pages, LIFO batch:31 [ 0.000000] Normal zone: 1008 pages used for memmap [ 0.000000] Normal zone: 72720 pages, LIFO batch:15 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32]) [ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] e820: [mem 0xee000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880111c00000 s78848 r8192 d23552 u1048576 [ 0.000000] pcpu-alloc: s78848 r8192 d23552 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1033095 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=dac98d66-8aaa-44c4-bcc8-4804e0bb31f1 ro oops=panic panic=30 INIT_VERBOSE=yes init=/sbin/init processor.max_cstate=1 reboot_type=1 nmi_watchdog=2,120 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ e4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ e4000000 [ 0.000000] Memory: 3979300k/4489216k available (5193k kernel code, 295428k absent, 214488k reserved, 3020k data, 896k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.071 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.001138] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.14 BogoMIPS (lpj=2394071) [ 0.001409] pid_max: default: 32768 minimum: 301 [ 0.001573] Security Framework initialized [ 0.001714] AppArmor: AppArmor disabled by boot time parameter [ 0.002292] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004884] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006049] Mount-cache hash table entries: 256 [ 0.006403] Initializing cgroup subsys cpuacct [ 0.006538] Initializing cgroup subsys devices [ 0.006673] Initializing cgroup subsys freezer [ 0.006805] Initializing cgroup subsys net_cls [ 0.006938] Initializing cgroup subsys blkio [ 0.007002] Initializing cgroup subsys perf_event [ 0.007164] tseg: 0000000000 [ 0.007177] CPU: Physical Processor ID: 0 [ 0.007308] CPU: Processor Core ID: 0 [ 0.007441] mce: CPU supports 5 MCE banks [ 0.007577] LVT offset 0 assigned for vector 0xf9 [ 0.007714] process: using AMD E400 aware idle routine [ 0.007849] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.007849] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.007849] tlb_flushall_shift: 4 [ 0.008093] Freeing SMP alternatives: 24k freed [ 0.009235] ACPI: Core revision 20120711 [ 0.012577] ftrace: allocating 19853 entries in 78 pages [ 0.019905] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.030123] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 1216 HE stepping 03 [ 0.030995] Performance Events: AMD PMU driver. [ 0.030995] ... version: 0 [ 0.030995] ... bit width: 48 [ 0.030995] ... generic registers: 4 [ 0.030995] ... value mask: 0000ffffffffffff [ 0.030995] ... max period: 00007fffffffffff [ 0.030995] ... fixed-purpose events: 0 [ 0.030995] ... event mask: 000000000000000f [ 0.031446] MCE: In-kernel MCE decoding enabled. [ 0.031636] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.032089] smpboot: Booting Node 0, Processors #1 OK [ 0.103101] Brought up 2 CPUs [ 0.103233] smpboot: Total of 2 processors activated (9575.17 BogoMIPS) [ 0.105175] NET: Registered protocol family 16 [ 0.105743] node 0 link 0: io port [1000, ffffff] [ 0.105746] TOM: 00000000ee000000 aka 3808M [ 0.105879] node 0 link 0: mmio [a0000, bffff] [ 0.105882] node 0 link 0: mmio [ee000000, ffe0ffff] [ 0.105885] TOM2: 0000000112000000 aka 4384M [ 0.105988] bus: [bus 00-ff] on node 0 link 0 [ 0.105990] bus: 00 [io 0x0000-0xffff] [ 0.105991] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.105993] bus: 00 [mem 0xee000000-0xffffffff] [ 0.105994] bus: 00 [mem 0x112000000-0xfcffffffff] [ 0.106044] ACPI: bus type pci registered [ 0.106351] dca service started, version 1.12.1 [ 0.106519] PCI: Using configuration type 1 for base access [ 0.112899] bio: create slab <bio-0> at 0 [ 0.113174] ACPI: Added _OSI(Module Device) [ 0.113312] ACPI: Added _OSI(Processor Device) [ 0.113446] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.113579] ACPI: Added _OSI(Processor Aggregator Device) [ 0.114631] ACPI: EC: Look up EC in DSDT [ 0.115783] ACPI: Executed 1 blocks of module-level executable AML code [ 0.117530] ACPI: Interpreter enabled [ 0.117661] ACPI: (supports S0 S5) [ 0.117895] ACPI: Using IOAPIC for interrupt routing [ 0.126544] ACPI: No dock devices found. [ 0.126682] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.127024] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.127319] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.127321] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.127324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.127326] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.127329] pci_root PNP0A03:00: host bridge window [mem 0xee000000-0xffffffff] (ignored) [ 0.127331] PCI: root bus 00: hardware-probed resources [ 0.127337] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.127617] PCI host bridge to bus 0000:00 [ 0.127747] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 0.127750] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.127884] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.127983] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.128121] pci_bus 0000:00: root bus resource [mem 0xee000000-0xffffffff] [ 0.128259] pci_bus 0000:00: root bus resource [mem 0x112000000-0xfcffffffff] [ 0.128412] pci 0000:00:01.0: [1166:0036] type 01 class 0x060400 [ 0.128435] pci 0000:00:01.0: Enabling HT MSI Mapping [ 0.128597] pci 0000:00:02.0: [1166:0205] type 00 class 0x060000 [ 0.128638] pci 0000:00:02.1: [1166:0214] type 00 class 0x01018a [ 0.128649] pci 0000:00:02.1: reg 10: [io 0x01f0-0x01f7] [ 0.128657] pci 0000:00:02.1: reg 14: [io 0x03f4-0x03f7] [ 0.128666] pci 0000:00:02.1: reg 18: [io 0x0170-0x0177] [ 0.128674] pci 0000:00:02.1: reg 1c: [io 0x0374-0x0377] [ 0.128683] pci 0000:00:02.1: reg 20: [io 0xffa0-0xffaf] [ 0.128711] pci 0000:00:02.2: [1166:0234] type 00 class 0x060100 [ 0.128778] pci 0000:00:03.0: [1166:0223] type 00 class 0x0c0310 [ 0.128793] pci 0000:00:03.0: reg 10: [mem 0xff6ee000-0xff6eefff] [ 0.128802] pci 0000:00:03.0: reg 14: [io 0xe800-0xe8ff] [ 0.128869] pci 0000:00:03.1: [1166:0223] type 00 class 0x0c0310 [ 0.128884] pci 0000:00:03.1: reg 10: [mem 0xff6ed000-0xff6edfff] [ 0.128893] pci 0000:00:03.1: reg 14: [io 0xd800-0xd8ff] [ 0.129034] pci 0000:00:03.2: [1166:0223] type 00 class 0x0c0320 [ 0.129049] pci 0000:00:03.2: reg 10: [mem 0xff6ec000-0xff6ecfff] [ 0.129058] pci 0000:00:03.2: reg 14: [io 0xd400-0xd4ff] [ 0.129114] pci 0000:00:03.2: supports D1 D2 [ 0.129116] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot [ 0.129140] pci 0000:00:05.0: [1002:515e] type 00 class 0x030000 [ 0.129154] pci 0000:00:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.129163] pci 0000:00:05.0: reg 14: [io 0xe000-0xe0ff] [ 0.129172] pci 0000:00:05.0: reg 18: [mem 0xff6f0000-0xff6fffff] [ 0.129200] pci 0000:00:05.0: reg 30: [mem 0xff6c0000-0xff6dffff pref] [ 0.129224] pci 0000:00:05.0: supports D1 D2 [ 0.129250] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.129266] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.129280] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.129294] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.129328] pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-ff] [ 0.129342] pci 0000:01:0d.0: [1166:0104] type 01 class 0x060400 [ 0.129377] pci 0000:01:0e.0: [1166:024b] type 00 class 0x01018f [ 0.129386] pci 0000:01:0e.0: reg 10: [io 0xbc00-0xbc07] [ 0.129391] pci 0000:01:0e.0: reg 14: [io 0xb880-0xb883] [ 0.129397] pci 0000:01:0e.0: reg 18: [io 0xb800-0xb807] [ 0.129403] pci 0000:01:0e.0: reg 1c: [io 0xb480-0xb483] [ 0.129408] pci 0000:01:0e.0: reg 20: [io 0xb400-0xb40f] [ 0.129414] pci 0000:01:0e.0: reg 24: [mem 0xff5fe000-0xff5fffff] [ 0.129420] pci 0000:01:0e.0: reg 30: [mem 0xff5c0000-0xff5dffff pref] [ 0.129452] pci 0000:01:0e.1: [1166:024b] type 00 class 0x01018f [ 0.129461] pci 0000:01:0e.1: reg 10: [io 0xb080-0xb087] [ 0.129467] pci 0000:01:0e.1: reg 14: [io 0xb000-0xb003] [ 0.129473] pci 0000:01:0e.1: reg 18: [io 0xac00-0xac07] [ 0.129478] pci 0000:01:0e.1: reg 1c: [io 0xa880-0xa883] [ 0.129484] pci 0000:01:0e.1: reg 20: [io 0xa800-0xa80f] [ 0.129526] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.129662] pci 0000:00:01.0: bridge window [io 0x7000-0xbfff] [ 0.129665] pci 0000:00:01.0: bridge window [mem 0xff000000-0xff5fffff] [ 0.129670] pci 0000:00:01.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.129680] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02] [ 0.129696] pci 0000:02:01.0: [1000:0054] type 00 class 0x010000 [ 0.129713] pci 0000:02:01.0: reg 10: [io 0x9000-0x90ff] [ 0.129725] pci 0000:02:01.0: reg 14: [mem 0xff4fc000-0xff4fffff 64bit] [ 0.129737] pci 0000:02:01.0: reg 1c: [mem 0xff4e0000-0xff4effff 64bit] [ 0.129752] pci 0000:02:01.0: reg 30: [mem 0xff200000-0xff3fffff pref] [ 0.129788] pci 0000:02:01.0: supports D1 D2 [ 0.129814] pci 0000:02:03.0: [14e4:1648] type 00 class 0x020000 [ 0.129832] pci 0000:02:03.0: reg 10: [mem 0xff4d0000-0xff4dffff 64bit] [ 0.129904] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 0.129928] pci 0000:02:03.1: [14e4:1648] type 00 class 0x020000 [ 0.129946] pci 0000:02:03.1: reg 10: [mem 0xff4c0000-0xff4cffff 64bit] [ 0.130033] pci 0000:02:03.1: PME# supported from D3hot D3cold [ 0.130074] pci 0000:01:0d.0: PCI bridge to [bus 02] [ 0.130210] pci 0000:01:0d.0: bridge window [io 0x7000-0x9fff] [ 0.130214] pci 0000:01:0d.0: bridge window [mem 0xff000000-0xff4fffff] [ 0.130218] pci 0000:01:0d.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.130228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.130302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.130332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2._PRT] [ 0.130388] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.130601] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.132735] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.133682] ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.134724] ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.135773] ACPI: PCI Interrupt Link [LN03] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15) [ 0.136721] ACPI: PCI Interrupt Link [LN04] (IRQs 1 3 4 5 6 7 *9 10 11 12 14 15) [ 0.137695] ACPI: PCI Interrupt Link [LN05] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.138774] ACPI: PCI Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.139823] ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.140870] ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15) [ 0.141821] ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 *7 9 10 11 12 14 15) [ 0.143032] ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.144427] ACPI: PCI Interrupt Link [LN11] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.145482] ACPI: PCI Interrupt Link [LN12] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.146530] ACPI: PCI Interrupt Link [LN13] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.147626] ACPI: PCI Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.148672] ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.149722] ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.150773] ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.151819] ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.152873] ACPI: PCI Interrupt Link [LN19] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.153919] ACPI: PCI Interrupt Link [LN20] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.155011] ACPI: PCI Interrupt Link [LN21] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.156032] ACPI: PCI Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.157032] ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.158153] ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.159205] ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.160253] ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.161303] ACPI: PCI Interrupt Link [LN27] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.162303] ACPI: PCI Interrupt Link [LN28] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.163422] ACPI: PCI Interrupt Link [LN29] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.164475] ACPI: PCI Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.165543] ACPI: PCI Interrupt Link [LNUS] (IRQs *10) [ 0.165893] ACPI: PCI Interrupt Link [LNSA] (IRQs *11) [ 0.166332] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.166551] vgaarb: loaded [ 0.166679] vgaarb: bridge control possible 0000:00:05.0 [ 0.167059] SCSI subsystem initialized [ 0.167199] ACPI: bus type usb registered [ 0.167412] usbcore: registered new interface driver usbfs [ 0.167588] usbcore: registered new interface driver hub [ 0.167783] usbcore: registered new device driver usb [ 0.168071] PCI: Using ACPI for IRQ routing [ 0.168207] PCI: pci_cache_line_size set to 64 bytes [ 0.168265] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.168267] e820: reserve RAM buffer [mem 0xedff0000-0xefffffff] [ 0.168269] e820: reserve RAM buffer [mem 0x112000000-0x113ffffff] [ 0.176838] pnp: PnP ACPI init [ 0.177014] ACPI: bus type pnp registered [ 0.177295] pnp 00:00: [bus 00-ff] [ 0.177298] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.177301] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.177303] pnp 00:00: [io 0x0d00-0xffff window] [ 0.177305] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.177308] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.177310] pnp 00:00: [mem 0xee000000-0xffffffff window] [ 0.177408] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.177434] pnp 00:01: [dma 4] [ 0.177437] pnp 00:01: [io 0x0000-0x000f] [ 0.177439] pnp 00:01: [io 0x0081-0x0083] [ 0.177441] pnp 00:01: [io 0x0087] [ 0.177443] pnp 00:01: [io 0x0089-0x008b] [ 0.177445] pnp 00:01: [io 0x008f] [ 0.177447] pnp 00:01: [io 0x00c0-0x00df] [ 0.177503] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.177511] pnp 00:02: [io 0x0070-0x0071] [ 0.177522] pnp 00:02: [irq 8] [ 0.177578] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.177610] pnp 00:03: [io 0x0060] [ 0.177612] pnp 00:03: [io 0x0064] [ 0.177617] pnp 00:03: [irq 1] [ 0.177677] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.177732] pnp 00:04: [irq 12] [ 0.177789] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.177794] pnp 00:05: [io 0x0061] [ 0.177851] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.177857] pnp 00:06: [io 0x00f0-0x00ff] [ 0.177862] pnp 00:06: [irq 13] [ 0.177918] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.178293] pnp 00:07: [io 0x03f0-0x03f5] [ 0.178296] pnp 00:07: [io 0x03f7] [ 0.178300] pnp 00:07: [irq 6] [ 0.178302] pnp 00:07: [dma 2] [ 0.178388] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.178677] pnp 00:08: [io 0x03f8-0x03ff] [ 0.178682] pnp 00:08: [irq 4] [ 0.178685] pnp 00:08: [dma 0 disabled] [ 0.178783] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.179080] pnp 00:09: [io 0x02f8-0x02ff] [ 0.179085] pnp 00:09: [irq 3] [ 0.179087] pnp 00:09: [dma 0 disabled] [ 0.179208] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.179700] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] [ 0.179703] pnp 00:0a: [io 0x0600-0x061f] [ 0.179705] pnp 00:0a: [io 0x0520-0x053f] [ 0.179707] pnp 00:0a: [io 0x0540-0x054f] [ 0.179709] pnp 00:0a: [io 0x0544-0x0553] [ 0.179711] pnp 00:0a: [io 0x0550-0x055f] [ 0.179713] pnp 00:0a: [io 0x0640-0x065f] [ 0.179715] pnp 00:0a: [io 0x0800-0x080f] [ 0.179717] pnp 00:0a: [io 0x0aa0-0x0abf] [ 0.179719] pnp 00:0a: [io 0x0ac0-0x0adf] [ 0.179722] pnp 00:0a: [io 0x0ae0-0x0aff] [ 0.179811] system 00:0a: [io 0x0600-0x061f] has been reserved [ 0.179948] system 00:0a: [io 0x0520-0x053f] has been reserved [ 0.179995] system 00:0a: [io 0x0540-0x054f] has been reserved [ 0.180132] system 00:0a: [io 0x0544-0x0553] could not be reserved [ 0.180269] system 00:0a: [io 0x0550-0x055f] has been reserved [ 0.180408] system 00:0a: [io 0x0640-0x065f] has been reserved [ 0.180544] system 00:0a: [io 0x0800-0x080f] has been reserved [ 0.180680] system 00:0a: [io 0x0aa0-0x0abf] has been reserved [ 0.180815] system 00:0a: [io 0x0ac0-0x0adf] has been reserved [ 0.180975] system 00:0a: [io 0x0ae0-0x0aff] has been reserved [ 0.181114] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181192] pnp 00:0b: [io 0x0010-0x001f] [ 0.181194] pnp 00:0b: [io 0x0022-0x003f] [ 0.181196] pnp 00:0b: [io 0x0044-0x005f] [ 0.181198] pnp 00:0b: [io 0x0062-0x0063] [ 0.181200] pnp 00:0b: [io 0x0065-0x006f] [ 0.181202] pnp 00:0b: [io 0x0072-0x007f] [ 0.181204] pnp 00:0b: [io 0x0080] [ 0.181207] pnp 00:0b: [io 0x0084-0x0086] [ 0.181209] pnp 00:0b: [io 0x0088] [ 0.181211] pnp 00:0b: [io 0x008c-0x008e] [ 0.181213] pnp 00:0b: [io 0x0090-0x009f] [ 0.181215] pnp 00:0b: [io 0x00a2-0x00bf] [ 0.181217] pnp 00:0b: [io 0x00e0-0x00ef] [ 0.181220] pnp 00:0b: [io 0x0092] [ 0.181222] pnp 00:0b: [io 0x040b] [ 0.181224] pnp 00:0b: [io 0x04d6] [ 0.181226] pnp 00:0b: [io 0x0c06-0x0c07] [ 0.181228] pnp 00:0b: [io 0x0c49] [ 0.181230] pnp 00:0b: [io 0x0c4a] [ 0.181232] pnp 00:0b: [io 0x0c6f] [ 0.181234] pnp 00:0b: [io 0x0c98] [ 0.181237] pnp 00:0b: [io 0x0f50-0x0f57] [ 0.181239] pnp 00:0b: [io 0x0c00-0x0c01] [ 0.181241] pnp 00:0b: [io 0x0c14] [ 0.181243] pnp 00:0b: [io 0x0c50-0x0c51] [ 0.181245] pnp 00:0b: [io 0x0c52] [ 0.181247] pnp 00:0b: [io 0x0c6c] [ 0.181249] pnp 00:0b: [io 0x0c6f] [ 0.181251] pnp 00:0b: [io 0x0cd6-0x0cd7] [ 0.181253] pnp 00:0b: [io 0x0cd4-0x0cd5] [ 0.181255] pnp 00:0b: [io 0x0cd8-0x0cdf] [ 0.181257] pnp 00:0b: [io 0x002e-0x002f] [ 0.181259] pnp 00:0b: [io 0x0530-0x0531] [ 0.181261] pnp 00:0b: [io 0x0440-0x045f] [ 0.181263] pnp 00:0b: [io 0x0480-0x049f] [ 0.181266] pnp 00:0b: [io 0x04c0-0x04df] [ 0.181268] pnp 00:0b: [io 0x0500-0x051f] [ 0.181270] pnp 00:0b: [io 0x0540-0x055f] [ 0.181272] pnp 00:0b: [io 0x0560-0x057f] [ 0.181274] pnp 00:0b: [io 0x0580-0x058f] [ 0.181276] pnp 00:0b: [io 0x0590-0x05ff] [ 0.181278] pnp 00:0b: [io 0x0660-0x06df] [ 0.181281] pnp 00:0b: [io 0x06e0-0x075f] [ 0.181284] pnp 00:0b: [io 0x0760-0x07ff] [ 0.181286] pnp 00:0b: [io 0x0ca8-0x0cab] [ 0.181288] pnp 00:0b: [io 0x0cac-0x0caf] [ 0.181290] pnp 00:0b: [io 0x04d0-0x04d1] [ 0.181292] pnp 00:0b: [io 0x0500-0x057f] [ 0.181294] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] [ 0.181297] pnp 00:0b: [mem 0xfebfe000-0xfebfefff] [ 0.181299] pnp 00:0b: [mem 0xff600000-0xffffffff] [ 0.181550] system 00:0b: [io 0x040b] has been reserved [ 0.181591] system 00:0b: [io 0x04d6] has been reserved [ 0.181726] system 00:0b: [io 0x0c06-0x0c07] has been reserved [ 0.181862] system 00:0b: [io 0x0c49] has been reserved [ 0.181987] system 00:0b: [io 0x0c4a] has been reserved [ 0.182123] system 00:0b: [io 0x0c6f] has been reserved [ 0.182258] system 00:0b: [io 0x0c98] has been reserved [ 0.182394] system 00:0b: [io 0x0f50-0x0f57] has been reserved [ 0.182530] system 00:0b: [io 0x0c00-0x0c01] has been reserved [ 0.182665] system 00:0b: [io 0x0c14] has been reserved [ 0.182800] system 00:0b: [io 0x0c50-0x0c51] has been reserved [ 0.182974] system 00:0b: [io 0x0c52] has been reserved [ 0.183110] system 00:0b: [io 0x0c6c] has been reserved [ 0.183245] system 00:0b: [io 0x0c6f] has been reserved [ 0.183381] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved [ 0.183517] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved [ 0.183652] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved [ 0.183790] system 00:0b: [io 0x0530-0x0531] has been reserved [ 0.183974] system 00:0b: [io 0x0440-0x045f] has been reserved [ 0.184114] system 00:0b: [io 0x0480-0x049f] has been reserved [ 0.184250] system 00:0b: [io 0x04c0-0x04df] could not be reserved [ 0.184387] system 00:0b: [io 0x0500-0x051f] has been reserved [ 0.184523] system 00:0b: [io 0x0540-0x055f] could not be reserved [ 0.184659] system 00:0b: [io 0x0560-0x057f] has been reserved [ 0.184794] system 00:0b: [io 0x0580-0x058f] has been reserved [ 0.184930] system 00:0b: [io 0x0590-0x05ff] has been reserved [ 0.184974] system 00:0b: [io 0x0660-0x06df] has been reserved [ 0.185111] system 00:0b: [io 0x06e0-0x075f] has been reserved [ 0.185247] system 00:0b: [io 0x0760-0x07ff] has been reserved [ 0.185384] system 00:0b: [io 0x0ca8-0x0cab] has been reserved [ 0.185520] system 00:0b: [io 0x0cac-0x0caf] has been reserved [ 0.185656] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.185792] system 00:0b: [io 0x0500-0x057f] could not be reserved [ 0.185975] system 00:0b: [mem 0xfebfe000-0xfebfefff] has been reserved [ 0.186115] system 00:0b: [mem 0xff600000-0xffffffff] could not be reserved [ 0.186253] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.186319] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.186322] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.186481] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.186528] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.186666] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.186777] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.186779] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.186781] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.186784] pnp 00:0d: [mem 0x00100000-0xedffffff] [ 0.186786] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.186948] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.186981] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.187120] system 00:0d: [mem 0x00100000-0xedffffff] could not be reserved [ 0.187259] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.188031] pnp: PnP ACPI: found 14 devices [ 0.188165] ACPI: ACPI bus type pnp unregistered [ 0.196248] Switching to clocksource acpi_pm [ 0.196428] pci 0000:01:0d.0: PCI bridge to [bus 02] [ 0.196563] pci 0000:01:0d.0: bridge window [io 0x7000-0x9fff] [ 0.196700] pci 0000:01:0d.0: bridge window [mem 0xff000000-0xff4fffff] [ 0.196838] pci 0000:01:0d.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.196838] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.196838] pci 0000:00:01.0: bridge window [io 0x7000-0xbfff] [ 0.196956] pci 0000:00:01.0: bridge window [mem 0xff000000-0xff5fffff] [ 0.197143] pci 0000:00:01.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.197367] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.197370] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.197372] pci_bus 0000:00: resource 6 [mem 0xee000000-0xffffffff] [ 0.197375] pci_bus 0000:00: resource 7 [mem 0x112000000-0xfcffffffff] [ 0.197378] pci_bus 0000:01: resource 0 [io 0x7000-0xbfff] [ 0.197380] pci_bus 0000:01: resource 1 [mem 0xff000000-0xff5fffff] [ 0.197383] pci_bus 0000:01: resource 2 [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.197386] pci_bus 0000:02: resource 0 [io 0x7000-0x9fff] [ 0.197388] pci_bus 0000:02: resource 1 [mem 0xff000000-0xff4fffff] [ 0.197391] pci_bus 0000:02: resource 2 [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.197435] NET: Registered protocol family 2 [ 0.198284] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.202390] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.203106] TCP: Hash tables configured (established 524288 bind 65536) [ 0.203297] TCP: reno registered [ 0.203436] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.203610] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.203848] NET: Registered protocol family 1 [ 0.204085] RPC: Registered named UNIX socket transport module. [ 0.204223] RPC: Registered udp transport module. [ 0.204356] RPC: Registered tcp transport module. [ 0.204487] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.204680] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205] [ 0.339043] pci 0000:00:05.0: Boot video device [ 0.339069] PCI: CLS 64 bytes, default 64 [ 0.339112] Trying to unpack rootfs image as initramfs... [ 0.591216] Freeing initrd memory: 11136k freed [ 0.598247] PCI-DMA: Disabling AGP. [ 0.598476] PCI-DMA: aperture base @ e4000000 size 65536 KB [ 0.598610] PCI-DMA: using GART IOMMU. [ 0.598742] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.603367] audit: initializing netlink socket (disabled) [ 0.603519] type=2000 audit(1347632887.602:1): initialized [ 0.621810] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.622703] VFS: Disk quotas dquot_6.5.2 [ 0.622859] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.623212] NFS: Registering the id_resolver key type [ 0.623360] Key type id_resolver registered [ 0.623491] Key type id_legacy registered [ 0.623624] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.624070] msgmni has been set to 7922 [ 0.624443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.624681] io scheduler noop registered [ 0.624814] io scheduler deadline registered [ 0.624955] io scheduler cfq registered (default) [ 0.625383] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.625599] ACPI: Power Button [PWRB] [ 0.625804] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.626032] ACPI: Sleep Button [SLPB] [ 0.626230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.626441] ACPI: Power Button [PWRF] [ 0.626653] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3 [ 0.626865] ACPI: Sleep Button [SLPF] [ 0.627126] ACPI: processor limited to max C-state 1 [ 0.627462] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.650826] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.671591] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.692370] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.713489] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.734307] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.734784] Real Time Clock Driver v1.12b [ 0.735098] Linux agpgart interface v0.103 [ 0.737409] brd: module loaded [ 0.738659] loop: module loaded [ 0.738790] Uniform Multi-Platform E-IDE driver [ 0.739033] serverworks 0000:00:02.1: IDE controller (0x1166:0x0214 rev 0x00) [ 0.739193] serverworks 0000:00:02.1: not 100% native mode: will probe irqs later [ 0.741071] ide0: BM-DMA at 0xffa0-0xffa7 [ 0.741212] Probing IDE interface ide0... [ 1.716012] hdb: CD-224E-R, ATAPI CD/DVD-ROM drive [ 1.716297] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.716969] hdb: UDMA/33 mode selected [ 1.728165] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.728710] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.728927] ide-gd driver 1.18 [ 1.729116] ide-cd driver 5.00 [ 1.740021] ide-cd: hdb: ATAPI 24X CD-ROM drive, 90kB Cache [ 1.740356] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.786669] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.786805] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.787142] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.787340] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 1.787539] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 1.808026] ehci_hcd 0000:00:03.2: irq 10, io mem 0xff6ec000 [ 1.814014] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 1.814296] hub 1-0:1.0: USB hub found [ 1.814430] hub 1-0:1.0: 4 ports detected [ 1.814650] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.814828] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 1.815034] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 1.815258] ohci_hcd 0000:00:03.0: irq 10, io mem 0xff6ee000 [ 1.870156] hub 2-0:1.0: USB hub found [ 1.870292] hub 2-0:1.0: 2 ports detected [ 1.870485] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 1.870672] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 1.870895] ohci_hcd 0000:00:03.1: irq 10, io mem 0xff6ed000 [ 1.926147] hub 3-0:1.0: USB hub found [ 1.926284] hub 3-0:1.0: 2 ports detected [ 1.926485] uhci_hcd: USB Universal Host Controller Interface driver [ 1.926721] usbcore: registered new interface driver usblp [ 1.926960] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.929672] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.929809] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.930085] mousedev: PS/2 mouse device common for all mice [ 1.930523] cpuidle: using governor ladder [ 1.931868] usbcore: registered new interface driver usbhid [ 1.932015] usbhid: USB HID core driver [ 1.932236] TCP: cubic registered [ 1.932367] NET: Registered protocol family 17 [ 1.932524] Key type dns_resolver registered [ 1.933071] registered taskstats version 1 [ 1.933677] console [netcon0] enabled [ 1.933808] netconsole: network logging started [ 1.933944] powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 1216 HE (2 cpu cores) (version 2.20.00) [ 1.934190] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.934190] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 1.935986] Freeing unused kernel memory: 896k freed [ 1.960833] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.972470] ACPI: bus type scsi registered [ 1.972782] libata version 3.00 loaded. [ 1.973597] sata_svw 0000:01:0e.0: version 2.3 [ 1.974368] scsi0 : sata_svw [ 1.974627] scsi1 : sata_svw [ 1.974866] scsi2 : sata_svw [ 1.975117] scsi3 : sata_svw [ 1.975745] ata1: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe000 irq 11 [ 1.975956] ata2: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe100 irq 11 [ 1.976198] ata3: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe200 irq 11 [ 1.976408] ata4: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe300 irq 11 [ 2.291358] ata1: SATA link down (SStatus 4 SControl 300) [ 2.606357] ata2: SATA link down (SStatus 4 SControl 300) [ 2.921355] ata3: SATA link down (SStatus 4 SControl 300) [ 3.108678] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 3.236355] ata4: SATA link down (SStatus 4 SControl 300) [ 3.240245] Fusion MPT base driver 3.04.20 [ 3.240382] Copyright (c) 1999-2008 LSI Corporation [ 3.245950] Fusion MPT SAS Host driver 3.04.20 [ 3.246259] mptbase: ioc0: Initiating bringup [ 3.524010] ioc0: LSISAS1068 B0: Capabilities={Initiator} [ 25.211059] scsi4 : ioc0: LSISAS1068 B0, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=20 [ 25.252428] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c500070dc515 [ 25.253712] scsi 4:0:0:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.256199] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 25.259269] sd 4:0:0:0: [sda] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.259893] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c500070dac45 [ 25.261171] scsi 4:0:1:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.261684] sd 4:0:0:0: [sda] Write Protect is off [ 25.261820] sd 4:0:0:0: [sda] Mode Sense: b3 00 10 08 [ 25.263600] sd 4:0:1:0: Attached scsi generic sg1 type 0 [ 25.266152] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.266884] sd 4:0:1:0: [sdb] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.267512] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x5000c500070dc391 [ 25.270691] scsi 4:0:2:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.271299] sd 4:0:1:0: [sdb] Write Protect is off [ 25.271435] sd 4:0:1:0: [sdb] Mode Sense: b3 00 10 08 [ 25.273157] sd 4:0:2:0: Attached scsi generic sg2 type 0 [ 25.275715] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.276443] sd 4:0:2:0: [sdc] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.277072] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x5000c500070daf29 [ 25.277305] sda: sda1 sda2 sda3 [ 25.282343] scsi 4:0:3:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.282354] sd 4:0:2:0: [sdc] Write Protect is off [ 25.282357] sd 4:0:2:0: [sdc] Mode Sense: b3 00 10 08 [ 25.284059] sd 4:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.284933] sd 4:0:3:0: Attached scsi generic sg3 type 0 [ 25.289465] sd 4:0:0:0: [sda] Attached SCSI disk [ 25.289938] sd 4:0:3:0: [sdd] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.290568] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 4, phy 4, sas_addr 0x5000c500070dc0c1 [ 25.290592] sdb: sdb1 sdb2 [ 25.293618] sd 4:0:3:0: [sdd] Write Protect is off [ 25.293753] sd 4:0:3:0: [sdd] Mode Sense: b3 00 10 08 [ 25.293976] scsi 4:0:4:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.295553] sd 4:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.296423] sd 4:0:4:0: Attached scsi generic sg4 type 0 [ 25.300939] sd 4:0:1:0: [sdb] Attached SCSI disk [ 25.301464] sd 4:0:4:0: [sde] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.302071] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 5, phy 5, sas_addr 0x5000c500070daa9d [ 25.303233] sdc: sdc1 sdc2 sdc3 [ 25.303379] scsi 4:0:5:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.303881] sd 4:0:4:0: [sde] Write Protect is off [ 25.304031] sd 4:0:4:0: [sde] Mode Sense: b3 00 10 08 [ 25.307716] sd 4:0:4:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.307780] sdd: sdd1 sdd2 [ 25.308235] sd 4:0:5:0: Attached scsi generic sg5 type 0 [ 25.315488] sd 4:0:5:0: [sdf] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.316116] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 7, phy 6, sas_addr 0x5000c500070dc1e5 [ 25.316975] sd 4:0:2:0: [sdc] Attached SCSI disk [ 25.317542] scsi 4:0:6:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.318012] sd 4:0:5:0: [sdf] Write Protect is off [ 25.318148] sd 4:0:5:0: [sdf] Mode Sense: b3 00 10 08 [ 25.319969] sd 4:0:6:0: Attached scsi generic sg6 type 0 [ 25.322519] sd 4:0:3:0: [sdd] Attached SCSI disk [ 25.322567] sd 4:0:5:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.322727] sde: sde1 [ 25.322862] sd 4:0:6:0: [sdg] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.326434] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 8, phy 7, sas_addr 0x5000c5000128ff31 [ 25.329247] scsi 4:0:7:0: Direct-Access SEAGATE ST373455SS 0004 PQ: 0 ANSI: 5 [ 25.329525] sd 4:0:6:0: [sdg] Write Protect is off [ 25.329667] sd 4:0:6:0: [sdg] Mode Sense: b3 00 10 08 [ 25.331646] sd 4:0:7:0: Attached scsi generic sg7 type 0 [ 25.332188] sd 4:0:6:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.334427] sd 4:0:4:0: [sde] Attached SCSI disk [ 25.334919] sd 4:0:7:0: [sdh] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.335853] sdf: sdf1 [ 25.340708] sd 4:0:7:0: [sdh] Write Protect is off [ 25.340844] sd 4:0:7:0: [sdh] Mode Sense: b3 00 10 08 [ 25.342414] sd 4:0:7:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.345673] sdg: sdg1 [ 25.346265] sd 4:0:5:0: [sdf] Attached SCSI disk [ 25.350541] sdh: sdh1 [ 25.355375] sd 4:0:6:0: [sdg] Attached SCSI disk [ 25.359018] sd 4:0:7:0: [sdh] Attached SCSI disk [ 25.383698] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 25.390053] fuse init (API version 7.20) [ 25.402397] md: linear personality registered for level -1 [ 25.407525] md: raid0 personality registered for level 0 [ 25.410773] md: raid1 personality registered for level 1 [ 25.413484] async_tx: api initialized (async) [ 25.414301] xor: automatically using best checksumming function: [ 25.424009] generic_sse: 7324.000 MB/sec [ 25.444020] raid6: sse2x1 3402 MB/s [ 25.461013] raid6: sse2x2 4421 MB/s [ 25.478015] raid6: sse2x4 4558 MB/s [ 25.478146] raid6: using algorithm sse2x4 (4558 MB/s) [ 25.478278] raid6: using intx1 recovery algorithm [ 25.481052] md: raid6 personality registered for level 6 [ 25.481192] md: raid5 personality registered for level 5 [ 25.481325] md: raid4 personality registered for level 4 [ 25.508104] udevd (1599): /proc/1599/oom_adj is deprecated, please use /proc/1599/oom_score_adj instead. [ 25.748905] tg3.c:v3.124 (March 21, 2012) [ 25.755497] tg3 0000:02:03.0: eth0: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:30:48:63:8b:6e [ 25.755723] tg3 0000:02:03.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 25.755942] tg3 0000:02:03.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0] [ 25.756170] tg3 0000:02:03.0: eth0: dma_rwctrl[769f0000] dma_mask[64-bit] [ 25.764577] tg3 0000:02:03.1: eth1: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:30:48:63:8b:6f [ 25.764801] tg3 0000:02:03.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 25.765031] tg3 0000:02:03.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 25.765244] tg3 0000:02:03.1: eth1: dma_rwctrl[769f0000] dma_mask[64-bit] [ 25.804924] EDAC MC: Ver: 3.0.0 [ 25.805151] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 25.811560] piix4_smbus 0000:00:02.0: SMBus Host Controller at 0x580, revision 0 [ 25.821586] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 25.828768] AMD64 EDAC driver v3.4.0 [ 25.836649] EDAC amd64: DRAM ECC enabled. [ 25.836788] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 0, MCG_CTL: 0x1f, NB MSR is enabled [ 25.836791] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 1, MCG_CTL: 0x1f, NB MSR is enabled [ 25.836793] EDAC amd64: K8 revF or later detected (node 0). [ 25.836933] EDAC DEBUG: reserve_mc_sibling_devs: F1: 0000:00:18.1 [ 25.836935] EDAC DEBUG: reserve_mc_sibling_devs: F2: 0000:00:18.2 [ 25.836936] EDAC DEBUG: reserve_mc_sibling_devs: F3: 0000:00:18.3 [ 25.836938] EDAC DEBUG: read_mc_regs: TOP_MEM: 0x00000000ee000000 [ 25.836939] EDAC DEBUG: read_mc_regs: TOP_MEM2: 0x0000000112000000 [ 25.836942] EDAC DEBUG: read_mc_regs: DRAM range[0], base: 0x0000000000000000; limit: 0x0000000111ffffff [ 25.836945] EDAC DEBUG: read_mc_regs: IntlvEn=Disabled; Range access: RW IntlvSel=0 DstNode=0 [ 25.836949] EDAC DEBUG: read_dct_base_mask: DCSB0[0]=0x00000001 reg: F2x40 [ 25.836951] EDAC DEBUG: read_dct_base_mask: DCSB0[1]=0x00000101 reg: F2x44 [ 25.836953] EDAC DEBUG: read_dct_base_mask: DCSB0[2]=0x00000201 reg: F2x48 [ 25.836955] EDAC DEBUG: read_dct_base_mask: DCSB0[3]=0x00000301 reg: F2x4c [ 25.836957] EDAC DEBUG: read_dct_base_mask: DCSB0[4]=0x00000000 reg: F2x50 [ 25.836959] EDAC DEBUG: read_dct_base_mask: DCSB0[5]=0x00000000 reg: F2x54 [ 25.836961] EDAC DEBUG: read_dct_base_mask: DCSB0[6]=0x00000000 reg: F2x58 [ 25.836963] EDAC DEBUG: read_dct_base_mask: DCSB0[7]=0x00000000 reg: F2x5c [ 25.836965] EDAC DEBUG: read_dct_base_mask: DCSM0[0]=0x00f83ce0 reg: F2x60 [ 25.836967] EDAC DEBUG: read_dct_base_mask: DCSM0[1]=0x00f83ce0 reg: F2x64 [ 25.836969] EDAC DEBUG: read_dct_base_mask: DCSM0[2]=0x00000000 reg: F2x68 [ 25.836971] EDAC DEBUG: read_dct_base_mask: DCSM0[3]=0x00000000 reg: F2x6c [ 25.836974] EDAC DEBUG: dump_misc_regs: F3xE8 (NB Cap): 0x00001719 [ 25.836975] EDAC DEBUG: dump_misc_regs: NB two channel DRAM capable: yes [ 25.836977] EDAC DEBUG: dump_misc_regs: ECC capable: yes, ChipKill ECC capable: yes [ 25.836978] EDAC DEBUG: amd64_dump_dramcfg_low: F2x090 (DRAM Cfg Low): 0x00090810 [ 25.836980] EDAC DEBUG: amd64_dump_dramcfg_low: DIMM type: unbuffered; all DIMMs support ECC: yes [ 25.836981] EDAC DEBUG: amd64_dump_dramcfg_low: PAR/ERR parity: disabled [ 25.836983] EDAC DEBUG: amd64_dump_dramcfg_low: x4 logical DIMMs present: L0: no L1: no L2: no L3: no [ 25.836985] EDAC DEBUG: dump_misc_regs: F3xB0 (Online Spare): 0x0f000000 [ 25.836986] EDAC DEBUG: dump_misc_regs: F1xF0 (DRAM Hole Address): 0xee001201, base: 0xee000000, offset: 0x12000000 [ 25.836988] EDAC DEBUG: dump_misc_regs: DramHoleValid: yes [ 25.836990] EDAC DEBUG: amd64_debug_display_dimm_sizes: F2x080 (DRAM Bank Address Mapping): 0x00000022 [ 25.836991] EDAC MC: DCT0 chip selects: [ 25.836993] EDAC amd64: MC: 0: 1024MB 1: 1024MB [ 25.837166] EDAC amd64: MC: 2: 1024MB 3: 1024MB [ 25.837298] EDAC amd64: MC: 4: 0MB 5: 0MB [ 25.837429] EDAC amd64: MC: 6: 0MB 7: 0MB [ 25.837563] EDAC DEBUG: edac_mc_alloc: allocating 1160 bytes for mci data (16 ranks, 16 csrows/channels) [ 25.837586] EDAC DEBUG: init_csrows: node 0, NBCFG=0x0ad00044[ChipKillEccCap: 1|DramEccEn: 1] [ 25.837588] EDAC DEBUG: init_csrows: MC node: 0, csrow: 0 [ 25.837589] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 0, channel: 0, DBAM idx: 2 [ 25.837591] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.837592] EDAC amd64: CS0: Unbuffered DDR2 RAM [ 25.837724] EDAC DEBUG: init_csrows: Total csrow0 pages: 262144 [ 25.837725] DBG: init_csrows: channel_count:2 [ 25.837856] DBG: init_csrows: channel_count:2 [ 25.837988] EDAC DEBUG: init_csrows: MC node: 0, csrow: 1 [ 25.837989] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 1, channel: 0, DBAM idx: 2 [ 25.837991] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.837992] EDAC amd64: CS1: Unbuffered DDR2 RAM [ 25.838157] EDAC DEBUG: init_csrows: Total csrow1 pages: 262144 [ 25.838158] DBG: init_csrows: channel_count:2 [ 25.838289] DBG: init_csrows: channel_count:2 [ 25.838421] EDAC DEBUG: init_csrows: MC node: 0, csrow: 2 [ 25.838422] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: 0, DBAM idx: 2 [ 25.838424] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.838425] EDAC amd64: CS2: Unbuffered DDR2 RAM [ 25.838556] EDAC DEBUG: init_csrows: Total csrow2 pages: 262144 [ 25.838558] DBG: init_csrows: channel_count:2 [ 25.838689] DBG: init_csrows: channel_count:2 [ 25.838820] EDAC DEBUG: init_csrows: MC node: 0, csrow: 3 [ 25.838822] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: 0, DBAM idx: 2 [ 25.838823] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.838824] EDAC amd64: CS3: Unbuffered DDR2 RAM [ 25.838957] EDAC DEBUG: init_csrows: Total csrow3 pages: 262144 [ 25.838958] DBG: init_csrows: channel_count:2 [ 25.839104] DBG: init_csrows: channel_count:2 [ 25.839236] EDAC DEBUG: edac_mc_add_mc: [ 25.839239] EDAC DEBUG: edac_create_sysfs_mci_device: creating bus mc0 [ 25.839267] EDAC DEBUG: edac_create_sysfs_mci_device: creating device mc0 [ 25.839288] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm0, located at csrow 0 channel 0 [ 25.839304] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank0 [ 25.839306] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm1, located at csrow 0 channel 1 [ 25.839317] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank1 [ 25.839319] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm2, located at csrow 1 channel 0 [ 25.839332] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank2 [ 25.839333] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm3, located at csrow 1 channel 1 [ 25.839345] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank3 [ 25.839347] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm8, located at csrow 4 channel 0 [ 25.839360] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank8 [ 25.839361] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm9, located at csrow 4 channel 1 [ 25.839373] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank9 [ 25.839375] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm10, located at csrow 5 channel 0 [ 25.839388] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank10 [ 25.839390] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm11, located at csrow 5 channel 1 [ 25.839402] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank11 [ 25.839405] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow0 [ 25.839419] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow1 [ 25.839431] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow2 [ 25.839445] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow3 [ 25.839473] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2 [ 25.839730] EDAC DEBUG: edac_pci_alloc_ctl_info: [ 25.839733] EDAC DEBUG: edac_pci_add_device: [ 25.839734] EDAC DEBUG: add_edac_pci_to_global_list: [ 25.839735] EDAC DEBUG: find_edac_pci_by_dev: [ 25.839737] EDAC DEBUG: edac_pci_create_sysfs: idx=0 [ 25.839738] EDAC DEBUG: edac_pci_main_kobj_setup: [ 25.839745] EDAC DEBUG: edac_pci_main_kobj_setup: Registered '.../edac/pci' kobject [ 25.839746] EDAC DEBUG: edac_pci_create_instance_kobj: [ 25.839750] EDAC DEBUG: edac_pci_create_instance_kobj: Register instance 'pci0' kobject [ 25.839752] EDAC DEBUG: edac_pci_workq_setup: [ 25.839756] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 29.099082] kvm: Nested Virtualization enabled [ 29.127015] microcode: AMD CPU family 0xf not supported [ 29.890048] w83793 0-002f: Registered watchdog chardev major 10, minor: 130 [ 30.078597] NET: Registered protocol family 10 [ 30.079037] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 30.079198] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.805519] Adding 4192960k swap on /dev/sdc3. Priority:-1 extents:1 across:4192960k [ 31.194578] microcode: AMD CPU family 0xf not supported [ 31.297628] microcode: AMD CPU family 0xf not supported [ 31.975710] tg3 0000:02:03.0: eth1: Link is up at 1000 Mbps, full duplex [ 31.975853] tg3 0000:02:03.0: eth1: Flow control is off for TX and off for RX [ 31.976017] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 32.482878] tg3 0000:02:03.1: eth0: Link is up at 1000 Mbps, full duplex [ 32.483027] tg3 0000:02:03.1: eth0: Flow control is off for TX and off for RX [ 32.483170] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.714481] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.466788] warning: `named' uses 32-bit capabilities (legacy support in use) [ 123.974065] EDAC DEBUG: amd64_get_dram_hole_info: DHAR info for node 0 base 0xee000000 offset 0x12000000 size 0x12000000 [ 131.423949] DBG: csrow_size_show: i:0 nr_pages:262144 nr_channels:2 [ 131.424112] DBG: csrow_size_show: i:1 nr_pages:524288 nr_channels:2 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-21 13:02 ` Josh Hunt @ 2012-09-21 14:01 ` Borislav Petkov 2012-09-21 14:54 ` Josh Hunt 0 siblings, 1 reply; 20+ messages in thread From: Borislav Petkov @ 2012-09-21 14:01 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Fri, Sep 21, 2012 at 08:02:16AM -0500, Josh Hunt wrote: > On 09/21/2012 07:36 AM, Borislav Petkov wrote: > >Ok, I think this is still the old code you're looking at so it would be > >cool if you could test with my patchset I sent you last week. > > > >Because with it, it all looks fine on my K8 here: > > > >It has 2 2048MB single-ranked DIMMs on each node and edac output looks > >like this: > > > >[ 52.920302] EDAC DEBUG: amd64_debug_display_dimm_sizes: F2x080 (DRAM Bank Address Mapping): 0x00000060 > >[ 52.920302] EDAC MC: DCT0 chip selects: > >[ 52.920304] EDAC amd64: MC: 0: 0MB 1: 0MB > >[ 52.920305] EDAC amd64: MC: 2: 2048MB 3: 2048MB > >[ 52.920306] EDAC amd64: MC: 4: 0MB 5: 0MB > >[ 52.920308] EDAC amd64: MC: 6: 0MB 7: 0MB > > > >... > > > >[ 52.920344] EDAC DEBUG: init_csrows: node 1, NBCFG=0x0ad00044[ChipKillEccCap: 1|DramEccEn: 1] > >[ 52.920345] EDAC DEBUG: init_csrows: MC node: 1, csrow: 2 > >[ 52.920346] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: 0, DBAM idx: 6 > >[ 52.920347] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 524288 > >[ 52.920348] EDAC amd64: CS2: Registered DDR2 RAM > >[ 52.920350] EDAC DEBUG: init_csrows: Total csrow2 pages: 524288 > >[ 52.920351] EDAC DEBUG: init_csrows: MC node: 1, csrow: 3 > >[ 52.920352] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: 0, DBAM idx: 6 > >[ 52.920353] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 524288 > >[ 52.920354] EDAC amd64: CS3: Registered DDR2 RAM > >[ 52.920355] EDAC DEBUG: init_csrows: Total csrow3 pages: 524288 > > > >$ cat /sys/devices/system/edac/mc/mc0/csrow2/size_mb > >2048 > >$ cat /sys/devices/system/edac/mc/mc0/csrow3/size_mb > >2048 > > > >So what am I missing? > > > >Thanks. > > I'm running with your edac-queue branch with the last commit being: > 9d67117feece8852570cc8ee25b68c41f8def323 > > You can verify this with my dmesg (also attached) showing the new > dbg messages added: > > <patch> > + edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n", > + csrow_nr, dct, cs_mode); > + edac_dbg(0, "nr_pages/channel: %u\n", nr_pages); > </patch> > > <dmesg> > [ 25.838822] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: > 0, DBAM idx: 2 > [ 25.838823] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 > </dmesg> > > Please let me know if this is the wrong version and I can rerun with > the correct one. Ah ok, my bad, I have 4 more patches ontop which should deal with the channel doubling, please repull the same branch which I've just updated. git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git edac-queue and retest. And you're right about WIDTH_128 - it actually denotes the channel width and the code wrongly uses it to say that there are two channels on K8. However, this has been the case since the driver went upstream and I need to think a bit harder when correcting that so that I don't upset something else in it. Also, it would be very helpful if you send me full dmesg after you've applied the latest patches so that I can have another reference when changing the WIDTH_128 thing. Thanks for your help. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-21 14:01 ` Borislav Petkov @ 2012-09-21 14:54 ` Josh Hunt 2012-09-21 15:10 ` Borislav Petkov 0 siblings, 1 reply; 20+ messages in thread From: Josh Hunt @ 2012-09-21 14:54 UTC (permalink / raw) To: Borislav Petkov; +Cc: linux-edac, linux-kernel [-- Attachment #1: Type: text/plain, Size: 1212 bytes --] On 09/21/2012 09:01 AM, Borislav Petkov wrote: > Ah ok, my bad, I have 4 more patches ontop which should deal with the > channel doubling, please repull the same branch which I've just updated. > > git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git edac-queue > > and retest. > > And you're right about WIDTH_128 - it actually denotes the channel width > and the code wrongly uses it to say that there are two channels on K8. > > However, this has been the case since the driver went upstream and I > need to think a bit harder when correcting that so that I don't upset > something else in it. > > Also, it would be very helpful if you send me full dmesg after you've > applied the latest patches so that I can have another reference when > changing the WIDTH_128 thing. > > Thanks for your help. OK so progress, but still not there. So this is correct now: root@x.x.x.x:/sys/devices/system/edac/mc/mc0# grep . csrow*/size_mb csrow0/size_mb:1024 csrow1/size_mb:1024 csrow2/size_mb:1024 csrow3/size_mb:1024 But this is not: root@x.x.x.x:/sys/devices/system/edac/mc/mc0# grep . size_mb 8192 Attached patch seems to resolve reading size_mb from the mc in sysfs. I'm also attaching the new dmesg. Josh [-- Attachment #2: 0001-EDAC-Fix-mc-size-reported-in-sysfs.patch --] [-- Type: text/x-patch, Size: 1369 bytes --] >From 2ae58bdca43cd52e0d24685b21baa5692cbd4ef9 Mon Sep 17 00:00:00 2001 From: Josh Hunt <johunt@akamai.com> Date: Fri, 21 Sep 2012 07:45:49 -0700 Subject: [PATCH] EDAC: Fix mc size reported in sysfs This is the complement to commit: EDAC: Fix csrow size reported in sysfs. This fixes the memory controller size reporting on csrow-based memory controllers. The csrow size is already combined for both channels. Without this patch memory size is reported doubled. Signed-off-by: Josh Hunt <johunt@akamai.com> --- drivers/edac/edac_mc_sysfs.c | 12 ++++++++---- 1 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index bd46610..a242dae 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -781,10 +781,14 @@ static ssize_t mci_size_mb_show(struct device *dev, for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) { struct csrow_info *csrow = mci->csrows[csrow_idx]; - for (j = 0; j < csrow->nr_channels; j++) { - struct dimm_info *dimm = csrow->channels[j]->dimm; - - total_pages += dimm->nr_pages; + if (csrow->mci->csbased) { + total_pages += csrow->nr_pages; + } else { + for (j = 0; j < csrow->nr_channels; j++) { + struct dimm_info *dimm = csrow->channels[j]->dimm; + + total_pages += dimm->nr_pages; + } } } -- 1.7.0.4 [-- Attachment #3: dmesg.log.new --] [-- Type: text/plain, Size: 56406 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-rc5+ (johunt@kernelsuite-780) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #2 SMP Fri Sep 21 07:07:35 PDT 2012 [ 0.000000] Command line: root=UUID=dac98d66-8aaa-44c4-bcc8-4804e0bb31f1 ro oops=panic panic=30 INIT_VERBOSE=yes init=/sbin/init processor.max_cstate=1 reboot_type=1 nmi_watchdog=2,120 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000edfeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000edff0000-0x00000000edffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000edffe000-0x00000000edffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec02fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000111ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Supermicro H8SSL-I2/H8SSL-I2, BIOS 080011 09/05/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x112000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF00000000 write-back [ 0.000000] 1 base 0100000000 mask FFF0000000 write-back [ 0.000000] 2 base 0110000000 mask FFFE000000 write-back [ 0.000000] 3 base 00EE000000 mask FFFE000000 uncachable [ 0.000000] 4 base 00F0000000 mask FFF0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000112000000 aka 4384M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xee000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xedff0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xedfeffff] [ 0.000000] [mem 0x00000000-0xeddfffff] page 2M [ 0.000000] [mem 0xede00000-0xedfeffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xedfeffff @ [mem 0x1f88b000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x111ffffff] [ 0.000000] [mem 0x100000000-0x111ffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x111ffffff @ [mem 0xedfea000-0xedfeffff] [ 0.000000] RAMDISK: [mem 0x37510000-0x37feffff] [ 0.000000] ACPI: RSDP 00000000000f9e40 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000edff0000 00030 (v01 A M I OEMRSDT 09000705 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000edff0200 00084 (v02 A M I OEMFACP 09000705 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000edff0410 030C5 (v01 1SSL2 1SSL2005 00000005 INTL 02002026) [ 0.000000] ACPI: FACS 00000000edffe000 00040 [ 0.000000] ACPI: APIC 00000000edff0390 00076 (v01 A M I OEMAPIC 09000705 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000edffe040 00056 (v01 A M I AMI_OEM 09000705 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000111ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x111ffffff] [ 0.000000] NODE_DATA [mem 0x111ffc000-0x111ffffff] [ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff88010d400000-ffff880110ffffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x111ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xedfeffff] [ 0.000000] node 0: [mem 0x100000000-0x111ffffff] [ 0.000000] On node 0 totalpages: 1048447 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 8 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 956456 pages, LIFO batch:31 [ 0.000000] Normal zone: 1008 pages used for memmap [ 0.000000] Normal zone: 72720 pages, LIFO batch:15 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32]) [ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] e820: [mem 0xee000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880111c00000 s78848 r8192 d23552 u1048576 [ 0.000000] pcpu-alloc: s78848 r8192 d23552 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1033095 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=dac98d66-8aaa-44c4-bcc8-4804e0bb31f1 ro oops=panic panic=30 INIT_VERBOSE=yes init=/sbin/init processor.max_cstate=1 reboot_type=1 nmi_watchdog=2,120 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ e4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ e4000000 [ 0.000000] Memory: 3979300k/4489216k available (5193k kernel code, 295428k absent, 214488k reserved, 3020k data, 896k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2393.842 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.002138] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.68 BogoMIPS (lpj=2393842) [ 0.002409] pid_max: default: 32768 minimum: 301 [ 0.002573] Security Framework initialized [ 0.002713] AppArmor: AppArmor disabled by boot time parameter [ 0.003292] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005891] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.007056] Mount-cache hash table entries: 256 [ 0.007407] Initializing cgroup subsys cpuacct [ 0.007542] Initializing cgroup subsys devices [ 0.007676] Initializing cgroup subsys freezer [ 0.007810] Initializing cgroup subsys net_cls [ 0.007943] Initializing cgroup subsys blkio [ 0.008002] Initializing cgroup subsys perf_event [ 0.008161] tseg: 0000000000 [ 0.008175] CPU: Physical Processor ID: 0 [ 0.008306] CPU: Processor Core ID: 0 [ 0.008439] mce: CPU supports 5 MCE banks [ 0.008575] LVT offset 0 assigned for vector 0xf9 [ 0.008715] process: using AMD E400 aware idle routine [ 0.008850] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.008850] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.008850] tlb_flushall_shift: 4 [ 0.009093] Freeing SMP alternatives: 24k freed [ 0.010235] ACPI: Core revision 20120711 [ 0.013578] ftrace: allocating 19853 entries in 78 pages [ 0.020909] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.031130] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 1216 HE stepping 03 [ 0.031995] Performance Events: AMD PMU driver. [ 0.031995] ... version: 0 [ 0.031995] ... bit width: 48 [ 0.031995] ... generic registers: 4 [ 0.031995] ... value mask: 0000ffffffffffff [ 0.031995] ... max period: 00007fffffffffff [ 0.031995] ... fixed-purpose events: 0 [ 0.031995] ... event mask: 000000000000000f [ 0.032445] MCE: In-kernel MCE decoding enabled. [ 0.032635] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.033093] smpboot: Booting Node 0, Processors #1 OK [ 0.104101] Brought up 2 CPUs [ 0.104230] smpboot: Total of 2 processors activated (9574.71 BogoMIPS) [ 0.106169] NET: Registered protocol family 16 [ 0.106735] node 0 link 0: io port [1000, ffffff] [ 0.106738] TOM: 00000000ee000000 aka 3808M [ 0.106872] node 0 link 0: mmio [a0000, bffff] [ 0.106875] node 0 link 0: mmio [ee000000, ffe0ffff] [ 0.106878] TOM2: 0000000112000000 aka 4384M [ 0.106988] bus: [bus 00-ff] on node 0 link 0 [ 0.106990] bus: 00 [io 0x0000-0xffff] [ 0.106991] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.106993] bus: 00 [mem 0xee000000-0xffffffff] [ 0.106994] bus: 00 [mem 0x112000000-0xfcffffffff] [ 0.107043] ACPI: bus type pci registered [ 0.107342] dca service started, version 1.12.1 [ 0.107511] PCI: Using configuration type 1 for base access [ 0.113897] bio: create slab <bio-0> at 0 [ 0.114219] ACPI: Added _OSI(Module Device) [ 0.114357] ACPI: Added _OSI(Processor Device) [ 0.114491] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.114623] ACPI: Added _OSI(Processor Aggregator Device) [ 0.115687] ACPI: EC: Look up EC in DSDT [ 0.116841] ACPI: Executed 1 blocks of module-level executable AML code [ 0.118597] ACPI: Interpreter enabled [ 0.118728] ACPI: (supports S0 S5) [ 0.118962] ACPI: Using IOAPIC for interrupt routing [ 0.127540] ACPI: No dock devices found. [ 0.127680] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.127994] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.128282] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.128285] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.128287] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.128290] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.128292] pci_root PNP0A03:00: host bridge window [mem 0xee000000-0xffffffff] (ignored) [ 0.128294] PCI: root bus 00: hardware-probed resources [ 0.128300] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.128581] PCI host bridge to bus 0000:00 [ 0.128710] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 0.128713] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.128849] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.129013] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.129151] pci_bus 0000:00: root bus resource [mem 0xee000000-0xffffffff] [ 0.129288] pci_bus 0000:00: root bus resource [mem 0x112000000-0xfcffffffff] [ 0.129438] pci 0000:00:01.0: [1166:0036] type 01 class 0x060400 [ 0.129460] pci 0000:00:01.0: Enabling HT MSI Mapping [ 0.129624] pci 0000:00:02.0: [1166:0205] type 00 class 0x060000 [ 0.129664] pci 0000:00:02.1: [1166:0214] type 00 class 0x01018a [ 0.129674] pci 0000:00:02.1: reg 10: [io 0x01f0-0x01f7] [ 0.129682] pci 0000:00:02.1: reg 14: [io 0x03f4-0x03f7] [ 0.129690] pci 0000:00:02.1: reg 18: [io 0x0170-0x0177] [ 0.129699] pci 0000:00:02.1: reg 1c: [io 0x0374-0x0377] [ 0.129707] pci 0000:00:02.1: reg 20: [io 0xffa0-0xffaf] [ 0.129736] pci 0000:00:02.2: [1166:0234] type 00 class 0x060100 [ 0.129804] pci 0000:00:03.0: [1166:0223] type 00 class 0x0c0310 [ 0.129819] pci 0000:00:03.0: reg 10: [mem 0xff6ee000-0xff6eefff] [ 0.129827] pci 0000:00:03.0: reg 14: [io 0xe800-0xe8ff] [ 0.129895] pci 0000:00:03.1: [1166:0223] type 00 class 0x0c0310 [ 0.129910] pci 0000:00:03.1: reg 10: [mem 0xff6ed000-0xff6edfff] [ 0.129918] pci 0000:00:03.1: reg 14: [io 0xd800-0xd8ff] [ 0.130021] pci 0000:00:03.2: [1166:0223] type 00 class 0x0c0320 [ 0.130035] pci 0000:00:03.2: reg 10: [mem 0xff6ec000-0xff6ecfff] [ 0.130044] pci 0000:00:03.2: reg 14: [io 0xd400-0xd4ff] [ 0.130098] pci 0000:00:03.2: supports D1 D2 [ 0.130100] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot [ 0.130124] pci 0000:00:05.0: [1002:515e] type 00 class 0x030000 [ 0.130138] pci 0000:00:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.130147] pci 0000:00:05.0: reg 14: [io 0xe000-0xe0ff] [ 0.130156] pci 0000:00:05.0: reg 18: [mem 0xff6f0000-0xff6fffff] [ 0.130184] pci 0000:00:05.0: reg 30: [mem 0xff6c0000-0xff6dffff pref] [ 0.130207] pci 0000:00:05.0: supports D1 D2 [ 0.130233] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.130249] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.130261] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.130274] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.130308] pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-ff] [ 0.130322] pci 0000:01:0d.0: [1166:0104] type 01 class 0x060400 [ 0.130356] pci 0000:01:0e.0: [1166:024b] type 00 class 0x01018f [ 0.130365] pci 0000:01:0e.0: reg 10: [io 0xbc00-0xbc07] [ 0.130370] pci 0000:01:0e.0: reg 14: [io 0xb880-0xb883] [ 0.130375] pci 0000:01:0e.0: reg 18: [io 0xb800-0xb807] [ 0.130381] pci 0000:01:0e.0: reg 1c: [io 0xb480-0xb483] [ 0.130386] pci 0000:01:0e.0: reg 20: [io 0xb400-0xb40f] [ 0.130391] pci 0000:01:0e.0: reg 24: [mem 0xff5fe000-0xff5fffff] [ 0.130397] pci 0000:01:0e.0: reg 30: [mem 0xff5c0000-0xff5dffff pref] [ 0.130428] pci 0000:01:0e.1: [1166:024b] type 00 class 0x01018f [ 0.130437] pci 0000:01:0e.1: reg 10: [io 0xb080-0xb087] [ 0.130443] pci 0000:01:0e.1: reg 14: [io 0xb000-0xb003] [ 0.130448] pci 0000:01:0e.1: reg 18: [io 0xac00-0xac07] [ 0.130453] pci 0000:01:0e.1: reg 1c: [io 0xa880-0xa883] [ 0.130459] pci 0000:01:0e.1: reg 20: [io 0xa800-0xa80f] [ 0.130500] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.130637] pci 0000:00:01.0: bridge window [io 0x7000-0xbfff] [ 0.130640] pci 0000:00:01.0: bridge window [mem 0xff000000-0xff5fffff] [ 0.130644] pci 0000:00:01.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.130654] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02] [ 0.130671] pci 0000:02:01.0: [1000:0054] type 00 class 0x010000 [ 0.130687] pci 0000:02:01.0: reg 10: [io 0x9000-0x90ff] [ 0.130699] pci 0000:02:01.0: reg 14: [mem 0xff4fc000-0xff4fffff 64bit] [ 0.130711] pci 0000:02:01.0: reg 1c: [mem 0xff4e0000-0xff4effff 64bit] [ 0.130725] pci 0000:02:01.0: reg 30: [mem 0xff200000-0xff3fffff pref] [ 0.130761] pci 0000:02:01.0: supports D1 D2 [ 0.130786] pci 0000:02:03.0: [14e4:1648] type 00 class 0x020000 [ 0.130804] pci 0000:02:03.0: reg 10: [mem 0xff4d0000-0xff4dffff 64bit] [ 0.130875] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 0.130900] pci 0000:02:03.1: [14e4:1648] type 00 class 0x020000 [ 0.130918] pci 0000:02:03.1: reg 10: [mem 0xff4c0000-0xff4cffff 64bit] [ 0.131010] pci 0000:02:03.1: PME# supported from D3hot D3cold [ 0.131051] pci 0000:01:0d.0: PCI bridge to [bus 02] [ 0.131185] pci 0000:01:0d.0: bridge window [io 0x7000-0x9fff] [ 0.131189] pci 0000:01:0d.0: bridge window [mem 0xff000000-0xff4fffff] [ 0.131193] pci 0000:01:0d.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.131202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.131276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.131306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2._PRT] [ 0.131362] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.131575] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.133681] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.134642] ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.135678] ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.136721] ACPI: PCI Interrupt Link [LN03] (IRQs 1 3 4 5 6 7 9 *10 11 12 14 15) [ 0.137678] ACPI: PCI Interrupt Link [LN04] (IRQs 1 3 4 5 6 7 *9 10 11 12 14 15) [ 0.138726] ACPI: PCI Interrupt Link [LN05] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.139772] ACPI: PCI Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.140825] ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.141870] ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15) [ 0.142821] ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 *7 9 10 11 12 14 15) [ 0.145034] ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.146433] ACPI: PCI Interrupt Link [LN11] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.147524] ACPI: PCI Interrupt Link [LN12] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.148572] ACPI: PCI Interrupt Link [LN13] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.149624] ACPI: PCI Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.150671] ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.151719] ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.152770] ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.153822] ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.154871] ACPI: PCI Interrupt Link [LN19] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.155917] ACPI: PCI Interrupt Link [LN20] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.157006] ACPI: PCI Interrupt Link [LN21] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.158031] ACPI: PCI Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.159031] ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.160152] ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.161201] ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.162251] ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.163300] ACPI: PCI Interrupt Link [LN27] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.164300] ACPI: PCI Interrupt Link [LN28] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.165299] ACPI: PCI Interrupt Link [LN29] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.166469] ACPI: PCI Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.167546] ACPI: PCI Interrupt Link [LNUS] (IRQs *10) [ 0.167899] ACPI: PCI Interrupt Link [LNSA] (IRQs *11) [ 0.168366] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.168549] vgaarb: loaded [ 0.168678] vgaarb: bridge control possible 0000:00:05.0 [ 0.169039] SCSI subsystem initialized [ 0.169180] ACPI: bus type usb registered [ 0.169398] usbcore: registered new interface driver usbfs [ 0.169578] usbcore: registered new interface driver hub [ 0.169802] usbcore: registered new device driver usb [ 0.170096] PCI: Using ACPI for IRQ routing [ 0.170234] PCI: pci_cache_line_size set to 64 bytes [ 0.170300] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.170302] e820: reserve RAM buffer [mem 0xedff0000-0xefffffff] [ 0.170304] e820: reserve RAM buffer [mem 0x112000000-0x113ffffff] [ 0.178839] pnp: PnP ACPI init [ 0.179022] ACPI: bus type pnp registered [ 0.179303] pnp 00:00: [bus 00-ff] [ 0.179306] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.179308] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.179311] pnp 00:00: [io 0x0d00-0xffff window] [ 0.179313] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.179315] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.179318] pnp 00:00: [mem 0xee000000-0xffffffff window] [ 0.179412] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.179443] pnp 00:01: [dma 4] [ 0.179447] pnp 00:01: [io 0x0000-0x000f] [ 0.179450] pnp 00:01: [io 0x0081-0x0083] [ 0.179452] pnp 00:01: [io 0x0087] [ 0.179454] pnp 00:01: [io 0x0089-0x008b] [ 0.179456] pnp 00:01: [io 0x008f] [ 0.179458] pnp 00:01: [io 0x00c0-0x00df] [ 0.179509] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.179524] pnp 00:02: [io 0x0070-0x0071] [ 0.179536] pnp 00:02: [irq 8] [ 0.179585] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.179623] pnp 00:03: [io 0x0060] [ 0.179625] pnp 00:03: [io 0x0064] [ 0.179630] pnp 00:03: [irq 1] [ 0.179683] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.179742] pnp 00:04: [irq 12] [ 0.179796] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.179807] pnp 00:05: [io 0x0061] [ 0.179856] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.179869] pnp 00:06: [io 0x00f0-0x00ff] [ 0.179874] pnp 00:06: [irq 13] [ 0.179923] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.180287] pnp 00:07: [io 0x03f0-0x03f5] [ 0.180290] pnp 00:07: [io 0x03f7] [ 0.180294] pnp 00:07: [irq 6] [ 0.180296] pnp 00:07: [dma 2] [ 0.180379] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.180643] pnp 00:08: [io 0x03f8-0x03ff] [ 0.180648] pnp 00:08: [irq 4] [ 0.180651] pnp 00:08: [dma 0 disabled] [ 0.180740] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.181013] pnp 00:09: [io 0x02f8-0x02ff] [ 0.181018] pnp 00:09: [irq 3] [ 0.181020] pnp 00:09: [dma 0 disabled] [ 0.181136] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.181605] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] [ 0.181607] pnp 00:0a: [io 0x0600-0x061f] [ 0.181609] pnp 00:0a: [io 0x0520-0x053f] [ 0.181611] pnp 00:0a: [io 0x0540-0x054f] [ 0.181613] pnp 00:0a: [io 0x0544-0x0553] [ 0.181615] pnp 00:0a: [io 0x0550-0x055f] [ 0.181617] pnp 00:0a: [io 0x0640-0x065f] [ 0.181620] pnp 00:0a: [io 0x0800-0x080f] [ 0.181622] pnp 00:0a: [io 0x0aa0-0x0abf] [ 0.181624] pnp 00:0a: [io 0x0ac0-0x0adf] [ 0.181626] pnp 00:0a: [io 0x0ae0-0x0aff] [ 0.181711] system 00:0a: [io 0x0600-0x061f] has been reserved [ 0.181850] system 00:0a: [io 0x0520-0x053f] has been reserved [ 0.181996] system 00:0a: [io 0x0540-0x054f] has been reserved [ 0.182132] system 00:0a: [io 0x0544-0x0553] could not be reserved [ 0.182269] system 00:0a: [io 0x0550-0x055f] has been reserved [ 0.182405] system 00:0a: [io 0x0640-0x065f] has been reserved [ 0.182543] system 00:0a: [io 0x0800-0x080f] has been reserved [ 0.182679] system 00:0a: [io 0x0aa0-0x0abf] has been reserved [ 0.182816] system 00:0a: [io 0x0ac0-0x0adf] has been reserved [ 0.182952] system 00:0a: [io 0x0ae0-0x0aff] has been reserved [ 0.182975] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.183053] pnp 00:0b: [io 0x0010-0x001f] [ 0.183057] pnp 00:0b: [io 0x0022-0x003f] [ 0.183059] pnp 00:0b: [io 0x0044-0x005f] [ 0.183061] pnp 00:0b: [io 0x0062-0x0063] [ 0.183063] pnp 00:0b: [io 0x0065-0x006f] [ 0.183065] pnp 00:0b: [io 0x0072-0x007f] [ 0.183068] pnp 00:0b: [io 0x0080] [ 0.183070] pnp 00:0b: [io 0x0084-0x0086] [ 0.183072] pnp 00:0b: [io 0x0088] [ 0.183074] pnp 00:0b: [io 0x008c-0x008e] [ 0.183076] pnp 00:0b: [io 0x0090-0x009f] [ 0.183078] pnp 00:0b: [io 0x00a2-0x00bf] [ 0.183080] pnp 00:0b: [io 0x00e0-0x00ef] [ 0.183082] pnp 00:0b: [io 0x0092] [ 0.183084] pnp 00:0b: [io 0x040b] [ 0.183086] pnp 00:0b: [io 0x04d6] [ 0.183088] pnp 00:0b: [io 0x0c06-0x0c07] [ 0.183090] pnp 00:0b: [io 0x0c49] [ 0.183092] pnp 00:0b: [io 0x0c4a] [ 0.183094] pnp 00:0b: [io 0x0c6f] [ 0.183096] pnp 00:0b: [io 0x0c98] [ 0.183099] pnp 00:0b: [io 0x0f50-0x0f57] [ 0.183101] pnp 00:0b: [io 0x0c00-0x0c01] [ 0.183103] pnp 00:0b: [io 0x0c14] [ 0.183105] pnp 00:0b: [io 0x0c50-0x0c51] [ 0.183107] pnp 00:0b: [io 0x0c52] [ 0.183109] pnp 00:0b: [io 0x0c6c] [ 0.183111] pnp 00:0b: [io 0x0c6f] [ 0.183113] pnp 00:0b: [io 0x0cd6-0x0cd7] [ 0.183115] pnp 00:0b: [io 0x0cd4-0x0cd5] [ 0.183117] pnp 00:0b: [io 0x0cd8-0x0cdf] [ 0.183120] pnp 00:0b: [io 0x002e-0x002f] [ 0.183122] pnp 00:0b: [io 0x0530-0x0531] [ 0.183124] pnp 00:0b: [io 0x0440-0x045f] [ 0.183127] pnp 00:0b: [io 0x0480-0x049f] [ 0.183129] pnp 00:0b: [io 0x04c0-0x04df] [ 0.183131] pnp 00:0b: [io 0x0500-0x051f] [ 0.183133] pnp 00:0b: [io 0x0540-0x055f] [ 0.183135] pnp 00:0b: [io 0x0560-0x057f] [ 0.183137] pnp 00:0b: [io 0x0580-0x058f] [ 0.183139] pnp 00:0b: [io 0x0590-0x05ff] [ 0.183142] pnp 00:0b: [io 0x0660-0x06df] [ 0.183144] pnp 00:0b: [io 0x06e0-0x075f] [ 0.183146] pnp 00:0b: [io 0x0760-0x07ff] [ 0.183148] pnp 00:0b: [io 0x0ca8-0x0cab] [ 0.183151] pnp 00:0b: [io 0x0cac-0x0caf] [ 0.183153] pnp 00:0b: [io 0x04d0-0x04d1] [ 0.183155] pnp 00:0b: [io 0x0500-0x057f] [ 0.183157] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] [ 0.183159] pnp 00:0b: [mem 0xfebfe000-0xfebfefff] [ 0.183162] pnp 00:0b: [mem 0xff600000-0xffffffff] [ 0.183322] system 00:0b: [io 0x040b] has been reserved [ 0.183459] system 00:0b: [io 0x04d6] has been reserved [ 0.183594] system 00:0b: [io 0x0c06-0x0c07] has been reserved [ 0.183731] system 00:0b: [io 0x0c49] has been reserved [ 0.183986] system 00:0b: [io 0x0c4a] has been reserved [ 0.184121] system 00:0b: [io 0x0c6f] has been reserved [ 0.184256] system 00:0b: [io 0x0c98] has been reserved [ 0.184391] system 00:0b: [io 0x0f50-0x0f57] has been reserved [ 0.184528] system 00:0b: [io 0x0c00-0x0c01] has been reserved [ 0.184664] system 00:0b: [io 0x0c14] has been reserved [ 0.184800] system 00:0b: [io 0x0c50-0x0c51] has been reserved [ 0.184936] system 00:0b: [io 0x0c52] has been reserved [ 0.184974] system 00:0b: [io 0x0c6c] has been reserved [ 0.185108] system 00:0b: [io 0x0c6f] has been reserved [ 0.185242] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved [ 0.185383] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved [ 0.185519] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved [ 0.185656] system 00:0b: [io 0x0530-0x0531] has been reserved [ 0.185792] system 00:0b: [io 0x0440-0x045f] has been reserved [ 0.185974] system 00:0b: [io 0x0480-0x049f] has been reserved [ 0.186110] system 00:0b: [io 0x04c0-0x04df] could not be reserved [ 0.186246] system 00:0b: [io 0x0500-0x051f] has been reserved [ 0.186382] system 00:0b: [io 0x0540-0x055f] could not be reserved [ 0.186519] system 00:0b: [io 0x0560-0x057f] has been reserved [ 0.186655] system 00:0b: [io 0x0580-0x058f] has been reserved [ 0.186794] system 00:0b: [io 0x0590-0x05ff] has been reserved [ 0.186974] system 00:0b: [io 0x0660-0x06df] has been reserved [ 0.187110] system 00:0b: [io 0x06e0-0x075f] has been reserved [ 0.187246] system 00:0b: [io 0x0760-0x07ff] has been reserved [ 0.187382] system 00:0b: [io 0x0ca8-0x0cab] has been reserved [ 0.187520] system 00:0b: [io 0x0cac-0x0caf] has been reserved [ 0.187655] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.187793] system 00:0b: [io 0x0500-0x057f] could not be reserved [ 0.187976] system 00:0b: [mem 0xfebfe000-0xfebfefff] has been reserved [ 0.188113] system 00:0b: [mem 0xff600000-0xffffffff] could not be reserved [ 0.188251] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.188317] pnp 00:0c: [mem 0xfec00000-0xfec00fff] [ 0.188320] pnp 00:0c: [mem 0xfee00000-0xfee00fff] [ 0.188387] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.188526] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.188664] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.188775] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.188778] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.188780] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.188782] pnp 00:0d: [mem 0x00100000-0xedffffff] [ 0.188784] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.188855] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.188980] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.189119] system 00:0d: [mem 0x00100000-0xedffffff] could not be reserved [ 0.189258] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.189924] pnp: PnP ACPI: found 14 devices [ 0.189972] ACPI: ACPI bus type pnp unregistered [ 0.198174] Switching to clocksource acpi_pm [ 0.198359] pci 0000:01:0d.0: PCI bridge to [bus 02] [ 0.198497] pci 0000:01:0d.0: bridge window [io 0x7000-0x9fff] [ 0.198635] pci 0000:01:0d.0: bridge window [mem 0xff000000-0xff4fffff] [ 0.198774] pci 0000:01:0d.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.198774] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 0.198833] pci 0000:00:01.0: bridge window [io 0x7000-0xbfff] [ 0.198970] pci 0000:00:01.0: bridge window [mem 0xff000000-0xff5fffff] [ 0.199154] pci 0000:00:01.0: bridge window [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.199377] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.199380] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.199382] pci_bus 0000:00: resource 6 [mem 0xee000000-0xffffffff] [ 0.199385] pci_bus 0000:00: resource 7 [mem 0x112000000-0xfcffffffff] [ 0.199388] pci_bus 0000:01: resource 0 [io 0x7000-0xbfff] [ 0.199391] pci_bus 0000:01: resource 1 [mem 0xff000000-0xff5fffff] [ 0.199393] pci_bus 0000:01: resource 2 [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.199396] pci_bus 0000:02: resource 0 [io 0x7000-0x9fff] [ 0.199398] pci_bus 0000:02: resource 1 [mem 0xff000000-0xff4fffff] [ 0.199401] pci_bus 0000:02: resource 2 [mem 0xeea00000-0xeeafffff 64bit pref] [ 0.199442] NET: Registered protocol family 2 [ 0.200314] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.204428] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.205165] TCP: Hash tables configured (established 524288 bind 65536) [ 0.205358] TCP: reno registered [ 0.205499] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.205671] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.205915] NET: Registered protocol family 1 [ 0.206153] RPC: Registered named UNIX socket transport module. [ 0.206291] RPC: Registered udp transport module. [ 0.206423] RPC: Registered tcp transport module. [ 0.206555] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.206746] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205] [ 0.341042] pci 0000:00:05.0: Boot video device [ 0.341068] PCI: CLS 64 bytes, default 64 [ 0.341113] Trying to unpack rootfs image as initramfs... [ 0.593203] Freeing initrd memory: 11136k freed [ 0.600243] PCI-DMA: Disabling AGP. [ 0.600474] PCI-DMA: aperture base @ e4000000 size 65536 KB [ 0.600608] PCI-DMA: using GART IOMMU. [ 0.600741] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.605350] audit: initializing netlink socket (disabled) [ 0.605501] type=2000 audit(1348238590.604:1): initialized [ 0.623796] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.624690] VFS: Disk quotas dquot_6.5.2 [ 0.624844] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.625198] NFS: Registering the id_resolver key type [ 0.625348] Key type id_resolver registered [ 0.625480] Key type id_legacy registered [ 0.625613] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.626065] msgmni has been set to 7922 [ 0.626429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.626667] io scheduler noop registered [ 0.626800] io scheduler deadline registered [ 0.626942] io scheduler cfq registered (default) [ 0.627329] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.627545] ACPI: Power Button [PWRB] [ 0.627752] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.627966] ACPI: Sleep Button [SLPB] [ 0.628176] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.628388] ACPI: Power Button [PWRF] [ 0.628598] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3 [ 0.628810] ACPI: Sleep Button [SLPF] [ 0.629077] ACPI: processor limited to max C-state 1 [ 0.629415] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.653078] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.673807] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.694534] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.715669] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.736475] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.736947] Real Time Clock Driver v1.12b [ 0.737254] Linux agpgart interface v0.103 [ 0.739586] brd: module loaded [ 0.740893] loop: module loaded [ 0.741041] Uniform Multi-Platform E-IDE driver [ 0.741273] serverworks 0000:00:02.1: IDE controller (0x1166:0x0214 rev 0x00) [ 0.741433] serverworks 0000:00:02.1: not 100% native mode: will probe irqs later [ 0.743279] ide0: BM-DMA at 0xffa0-0xffa7 [ 0.743420] Probing IDE interface ide0... [ 1.718013] hdb: CD-224E-R, ATAPI CD/DVD-ROM drive [ 1.718302] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.718971] hdb: UDMA/33 mode selected [ 1.730160] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.730704] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 1.730920] ide-gd driver 1.18 [ 1.731107] ide-cd driver 5.00 [ 1.742018] ide-cd: hdb: ATAPI 24X CD-ROM drive, 90kB Cache [ 1.742350] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.788631] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.788767] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.789107] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.789308] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 1.789513] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 1.810031] ehci_hcd 0000:00:03.2: irq 10, io mem 0xff6ec000 [ 1.816014] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 1.816300] hub 1-0:1.0: USB hub found [ 1.816435] hub 1-0:1.0: 4 ports detected [ 1.816656] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.816836] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 1.817042] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 1.817267] ohci_hcd 0000:00:03.0: irq 10, io mem 0xff6ee000 [ 1.872153] hub 2-0:1.0: USB hub found [ 1.872290] hub 2-0:1.0: 2 ports detected [ 1.872482] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 1.872670] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 1.872893] ohci_hcd 0000:00:03.1: irq 10, io mem 0xff6ed000 [ 1.928146] hub 3-0:1.0: USB hub found [ 1.928282] hub 3-0:1.0: 2 ports detected [ 1.928484] uhci_hcd: USB Universal Host Controller Interface driver [ 1.928721] usbcore: registered new interface driver usblp [ 1.928962] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.931670] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.931807] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.932074] mousedev: PS/2 mouse device common for all mice [ 1.932516] cpuidle: using governor ladder [ 1.933848] usbcore: registered new interface driver usbhid [ 1.933982] usbhid: USB HID core driver [ 1.934225] TCP: cubic registered [ 1.934356] NET: Registered protocol family 17 [ 1.934515] Key type dns_resolver registered [ 1.935098] registered taskstats version 1 [ 1.935714] console [netcon0] enabled [ 1.935846] netconsole: network logging started [ 1.935982] powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 1216 HE (2 cpu cores) (version 2.20.00) [ 1.936236] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.936236] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 1.938054] Freeing unused kernel memory: 896k freed [ 1.964357] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.974109] ACPI: bus type scsi registered [ 1.974414] libata version 3.00 loaded. [ 1.975293] sata_svw 0000:01:0e.0: version 2.3 [ 1.976035] scsi0 : sata_svw [ 1.976294] scsi1 : sata_svw [ 1.976532] scsi2 : sata_svw [ 1.976768] scsi3 : sata_svw [ 1.976984] ata1: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe000 irq 11 [ 1.977233] ata2: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe100 irq 11 [ 1.977444] ata3: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe200 irq 11 [ 1.977653] ata4: SATA max UDMA/133 mmio m8192@0xff5fe000 port 0xff5fe300 irq 11 [ 2.292357] ata1: SATA link down (SStatus 4 SControl 300) [ 2.607354] ata2: SATA link down (SStatus 4 SControl 300) [ 2.922356] ata3: SATA link down (SStatus 4 SControl 300) [ 3.115235] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 3.237355] ata4: SATA link down (SStatus 4 SControl 300) [ 3.241295] Fusion MPT base driver 3.04.20 [ 3.241431] Copyright (c) 1999-2008 LSI Corporation [ 3.247074] Fusion MPT SAS Host driver 3.04.20 [ 3.247365] mptbase: ioc0: Initiating bringup [ 3.525010] ioc0: LSISAS1068 B0: Capabilities={Initiator} [ 25.212058] scsi4 : ioc0: LSISAS1068 B0, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=20 [ 25.253381] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c500070dc515 [ 25.254664] scsi 4:0:0:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.257147] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 25.260219] sd 4:0:0:0: [sda] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.260843] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c500070dac45 [ 25.262121] scsi 4:0:1:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.262633] sd 4:0:0:0: [sda] Write Protect is off [ 25.262770] sd 4:0:0:0: [sda] Mode Sense: b3 00 10 08 [ 25.264542] sd 4:0:1:0: Attached scsi generic sg1 type 0 [ 25.267097] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.267830] sd 4:0:1:0: [sdb] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.268459] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x5000c500070dc391 [ 25.271630] scsi 4:0:2:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.272244] sd 4:0:1:0: [sdb] Write Protect is off [ 25.272379] sd 4:0:1:0: [sdb] Mode Sense: b3 00 10 08 [ 25.274076] sd 4:0:2:0: Attached scsi generic sg2 type 0 [ 25.276625] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.277355] sd 4:0:2:0: [sdc] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.277981] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x5000c500070daf29 [ 25.278227] sda: sda1 sda2 sda3 [ 25.283271] scsi 4:0:3:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.283283] sd 4:0:2:0: [sdc] Write Protect is off [ 25.283285] sd 4:0:2:0: [sdc] Mode Sense: b3 00 10 08 [ 25.284987] sd 4:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.285856] sd 4:0:3:0: Attached scsi generic sg3 type 0 [ 25.290393] sd 4:0:0:0: [sda] Attached SCSI disk [ 25.290865] sd 4:0:3:0: [sdd] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.291496] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 4, phy 4, sas_addr 0x5000c500070dc0c1 [ 25.291520] sdb: sdb1 sdb2 [ 25.294539] sd 4:0:3:0: [sdd] Write Protect is off [ 25.294675] sd 4:0:3:0: [sdd] Mode Sense: b3 00 10 08 [ 25.294898] scsi 4:0:4:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.296478] sd 4:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.297332] sd 4:0:4:0: Attached scsi generic sg4 type 0 [ 25.301864] sd 4:0:1:0: [sdb] Attached SCSI disk [ 25.302387] sd 4:0:4:0: [sde] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.302992] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 5, phy 5, sas_addr 0x5000c500070daa9d [ 25.304273] scsi 4:0:5:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.304791] sd 4:0:4:0: [sde] Write Protect is off [ 25.304927] sd 4:0:4:0: [sde] Mode Sense: b3 00 10 08 [ 25.306661] sdd: sdd1 sdd2 [ 25.306913] sd 4:0:5:0: Attached scsi generic sg5 type 0 [ 25.309243] sdc: sdc1 sdc2 sdc3 [ 25.309248] sd 4:0:4:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.309562] sd 4:0:5:0: [sdf] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.313114] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 7, phy 6, sas_addr 0x5000c500070dc1e5 [ 25.317580] sd 4:0:5:0: [sdf] Write Protect is off [ 25.317715] sd 4:0:5:0: [sdf] Mode Sense: b3 00 10 08 [ 25.317971] scsi 4:0:6:0: Direct-Access SEAGATE ST373455SS 0002 PQ: 0 ANSI: 5 [ 25.319558] sd 4:0:5:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.320457] sd 4:0:6:0: Attached scsi generic sg6 type 0 [ 25.324926] sd 4:0:3:0: [sdd] Attached SCSI disk [ 25.324980] sd 4:0:2:0: [sdc] Attached SCSI disk [ 25.325018] sde: sde1 [ 25.325265] sd 4:0:6:0: [sdg] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.326789] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 8, phy 7, sas_addr 0x5000c5000128ff31 [ 25.329606] scsi 4:0:7:0: Direct-Access SEAGATE ST373455SS 0004 PQ: 0 ANSI: 5 [ 25.329880] sd 4:0:6:0: [sdg] Write Protect is off [ 25.330029] sd 4:0:6:0: [sdg] Mode Sense: b3 00 10 08 [ 25.331159] sdf: sdf1 [ 25.332026] sd 4:0:7:0: Attached scsi generic sg7 type 0 [ 25.332595] sd 4:0:6:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.336828] sd 4:0:4:0: [sde] Attached SCSI disk [ 25.337302] sd 4:0:7:0: [sdh] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 25.341463] sd 4:0:7:0: [sdh] Write Protect is off [ 25.341597] sd 4:0:7:0: [sdh] Mode Sense: b3 00 10 08 [ 25.342822] sd 4:0:5:0: [sdf] Attached SCSI disk [ 25.343163] sd 4:0:7:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 25.346261] sdg: sdg1 [ 25.352130] sdh: sdh1 [ 25.354665] sd 4:0:6:0: [sdg] Attached SCSI disk [ 25.360622] sd 4:0:7:0: [sdh] Attached SCSI disk [ 25.384975] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 25.391146] fuse init (API version 7.20) [ 25.403426] md: linear personality registered for level -1 [ 25.408636] md: raid0 personality registered for level 0 [ 25.411923] md: raid1 personality registered for level 1 [ 25.414618] async_tx: api initialized (async) [ 25.415432] xor: automatically using best checksumming function: [ 25.425011] generic_sse: 7312.000 MB/sec [ 25.445037] raid6: sse2x1 3113 MB/s [ 25.462018] raid6: sse2x2 4035 MB/s [ 25.479031] raid6: sse2x4 4191 MB/s [ 25.479162] raid6: using algorithm sse2x4 (4191 MB/s) [ 25.479295] raid6: using intx1 recovery algorithm [ 25.482167] md: raid6 personality registered for level 6 [ 25.482307] md: raid5 personality registered for level 5 [ 25.482440] md: raid4 personality registered for level 4 [ 25.509600] udevd (1600): /proc/1600/oom_adj is deprecated, please use /proc/1600/oom_score_adj instead. [ 25.776024] tg3.c:v3.124 (March 21, 2012) [ 25.782211] tg3 0000:02:03.0: eth0: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:30:48:63:8b:6e [ 25.782434] tg3 0000:02:03.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 25.782652] tg3 0000:02:03.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0] [ 25.782864] tg3 0000:02:03.0: eth0: dma_rwctrl[769f0000] dma_mask[64-bit] [ 25.800580] tg3 0000:02:03.1: eth1: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:30:48:63:8b:6f [ 25.800807] tg3 0000:02:03.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 25.801041] tg3 0000:02:03.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 25.801254] tg3 0000:02:03.1: eth1: dma_rwctrl[769f0000] dma_mask[64-bit] [ 25.808856] EDAC MC: Ver: 3.0.0 [ 25.809094] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 25.814032] piix4_smbus 0000:00:02.0: SMBus Host Controller at 0x580, revision 0 [ 25.815990] AMD64 EDAC driver v3.4.0 [ 25.819874] EDAC amd64: DRAM ECC enabled. [ 25.820061] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 0, MCG_CTL: 0x1f, NB MSR is enabled [ 25.820063] EDAC DEBUG: amd64_nb_mce_bank_enabled_on_node: core: 1, MCG_CTL: 0x1f, NB MSR is enabled [ 25.820066] EDAC amd64: K8 revF or later detected (node 0). [ 25.820208] EDAC DEBUG: reserve_mc_sibling_devs: F1: 0000:00:18.1 [ 25.820209] EDAC DEBUG: reserve_mc_sibling_devs: F2: 0000:00:18.2 [ 25.820211] EDAC DEBUG: reserve_mc_sibling_devs: F3: 0000:00:18.3 [ 25.820212] EDAC DEBUG: read_mc_regs: TOP_MEM: 0x00000000ee000000 [ 25.820214] EDAC DEBUG: read_mc_regs: TOP_MEM2: 0x0000000112000000 [ 25.820217] EDAC DEBUG: read_mc_regs: DRAM range[0], base: 0x0000000000000000; limit: 0x0000000111ffffff [ 25.820220] EDAC DEBUG: read_mc_regs: IntlvEn=Disabled; Range access: RW IntlvSel=0 DstNode=0 [ 25.820225] EDAC DEBUG: read_dct_base_mask: DCSB0[0]=0x00000001 reg: F2x40 [ 25.820227] EDAC DEBUG: read_dct_base_mask: DCSB0[1]=0x00000101 reg: F2x44 [ 25.820228] EDAC DEBUG: read_dct_base_mask: DCSB0[2]=0x00000201 reg: F2x48 [ 25.820230] EDAC DEBUG: read_dct_base_mask: DCSB0[3]=0x00000301 reg: F2x4c [ 25.820232] EDAC DEBUG: read_dct_base_mask: DCSB0[4]=0x00000000 reg: F2x50 [ 25.820234] EDAC DEBUG: read_dct_base_mask: DCSB0[5]=0x00000000 reg: F2x54 [ 25.820236] EDAC DEBUG: read_dct_base_mask: DCSB0[6]=0x00000000 reg: F2x58 [ 25.820238] EDAC DEBUG: read_dct_base_mask: DCSB0[7]=0x00000000 reg: F2x5c [ 25.820240] EDAC DEBUG: read_dct_base_mask: DCSM0[0]=0x00f83ce0 reg: F2x60 [ 25.820242] EDAC DEBUG: read_dct_base_mask: DCSM0[1]=0x00f83ce0 reg: F2x64 [ 25.820243] EDAC DEBUG: read_dct_base_mask: DCSM0[2]=0x00000000 reg: F2x68 [ 25.820245] EDAC DEBUG: read_dct_base_mask: DCSM0[3]=0x00000000 reg: F2x6c [ 25.820248] EDAC DEBUG: dump_misc_regs: F3xE8 (NB Cap): 0x00001719 [ 25.820250] EDAC DEBUG: dump_misc_regs: NB two channel DRAM capable: yes [ 25.820251] EDAC DEBUG: dump_misc_regs: ECC capable: yes, ChipKill ECC capable: yes [ 25.820253] EDAC DEBUG: amd64_dump_dramcfg_low: F2x090 (DRAM Cfg Low): 0x00090810 [ 25.820254] EDAC DEBUG: amd64_dump_dramcfg_low: DIMM type: unbuffered; all DIMMs support ECC: yes [ 25.820256] EDAC DEBUG: amd64_dump_dramcfg_low: PAR/ERR parity: disabled [ 25.820258] EDAC DEBUG: amd64_dump_dramcfg_low: x4 logical DIMMs present: L0: no L1: no L2: no L3: no [ 25.820259] EDAC DEBUG: dump_misc_regs: F3xB0 (Online Spare): 0x0f000000 [ 25.820261] EDAC DEBUG: dump_misc_regs: F1xF0 (DRAM Hole Address): 0xee001201, base: 0xee000000, offset: 0x12000000 [ 25.820262] EDAC DEBUG: dump_misc_regs: DramHoleValid: yes [ 25.820264] EDAC DEBUG: amd64_debug_display_dimm_sizes: F2x080 (DRAM Bank Address Mapping): 0x00000022 [ 25.820266] EDAC MC: DCT0 chip selects: [ 25.820268] EDAC amd64: MC: 0: 1024MB 1: 1024MB [ 25.820400] EDAC amd64: MC: 2: 1024MB 3: 1024MB [ 25.820532] EDAC amd64: MC: 4: 0MB 5: 0MB [ 25.820664] EDAC amd64: MC: 6: 0MB 7: 0MB [ 25.820798] EDAC DEBUG: edac_mc_alloc: allocating 1160 bytes for mci data (16 ranks, 16 csrows/channels) [ 25.820824] EDAC DEBUG: init_csrows: node 0, NBCFG=0x0ad00044[ChipKillEccCap: 1|DramEccEn: 1] [ 25.820825] EDAC DEBUG: init_csrows: MC node: 0, csrow: 0 [ 25.820827] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 0, channel: 0, DBAM idx: 2 [ 25.820829] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.820830] EDAC amd64: CS0: Unbuffered DDR2 RAM [ 25.820964] EDAC DEBUG: init_csrows: Total csrow0 pages: 262144 [ 25.820965] EDAC DEBUG: init_csrows: MC node: 0, csrow: 1 [ 25.820967] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 1, channel: 0, DBAM idx: 2 [ 25.820968] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.820970] EDAC amd64: CS1: Unbuffered DDR2 RAM [ 25.821117] EDAC DEBUG: init_csrows: Total csrow1 pages: 262144 [ 25.821118] EDAC DEBUG: init_csrows: MC node: 0, csrow: 2 [ 25.821120] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 2, channel: 0, DBAM idx: 2 [ 25.821121] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.821122] EDAC amd64: CS2: Unbuffered DDR2 RAM [ 25.821255] EDAC DEBUG: init_csrows: Total csrow2 pages: 262144 [ 25.821256] EDAC DEBUG: init_csrows: MC node: 0, csrow: 3 [ 25.821258] EDAC DEBUG: amd64_csrow_nr_pages: csrow: 3, channel: 0, DBAM idx: 2 [ 25.821259] EDAC DEBUG: amd64_csrow_nr_pages: nr_pages/channel: 262144 [ 25.821261] EDAC amd64: CS3: Unbuffered DDR2 RAM [ 25.821392] EDAC DEBUG: init_csrows: Total csrow3 pages: 262144 [ 25.821394] EDAC DEBUG: edac_mc_add_mc: [ 25.821397] EDAC DEBUG: edac_create_sysfs_mci_device: creating bus mc0 [ 25.821426] EDAC DEBUG: edac_create_sysfs_mci_device: creating device mc0 [ 25.821769] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm0, located at csrow 0 channel 0 [ 25.821784] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank0 [ 25.821786] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm1, located at csrow 0 channel 1 [ 25.821799] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank1 [ 25.821800] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm2, located at csrow 1 channel 0 [ 25.821814] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank2 [ 25.821816] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm3, located at csrow 1 channel 1 [ 25.821833] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank3 [ 25.821834] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm8, located at csrow 4 channel 0 [ 25.821848] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank8 [ 25.821850] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm9, located at csrow 4 channel 1 [ 25.821863] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank9 [ 25.821864] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm10, located at csrow 5 channel 0 [ 25.821878] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank10 [ 25.821879] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm11, located at csrow 5 channel 1 [ 25.821891] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device rank11 [ 25.821894] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow0 [ 25.821908] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow1 [ 25.821921] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow2 [ 25.821933] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow3 [ 25.821966] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2 [ 25.822292] EDAC DEBUG: edac_pci_alloc_ctl_info: [ 25.822298] EDAC DEBUG: edac_pci_add_device: [ 25.822299] EDAC DEBUG: add_edac_pci_to_global_list: [ 25.822301] EDAC DEBUG: find_edac_pci_by_dev: [ 25.822303] EDAC DEBUG: edac_pci_create_sysfs: idx=0 [ 25.822304] EDAC DEBUG: edac_pci_main_kobj_setup: [ 25.822311] EDAC DEBUG: edac_pci_main_kobj_setup: Registered '.../edac/pci' kobject [ 25.822312] EDAC DEBUG: edac_pci_create_instance_kobj: [ 25.822316] EDAC DEBUG: edac_pci_create_instance_kobj: Register instance 'pci0' kobject [ 25.822318] EDAC DEBUG: edac_pci_workq_setup: [ 25.822323] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 25.832484] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 29.140395] kvm: Nested Virtualization enabled [ 29.159727] microcode: AMD CPU family 0xf not supported [ 29.911046] w83793 0-002f: Registered watchdog chardev major 10, minor: 130 [ 30.095563] NET: Registered protocol family 10 [ 30.095991] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 30.096166] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.777264] Adding 4192960k swap on /dev/sdc3. Priority:-1 extents:1 across:4192960k [ 31.224085] microcode: AMD CPU family 0xf not supported [ 31.330160] microcode: AMD CPU family 0xf not supported [ 32.437598] tg3 0000:02:03.0: eth1: Link is up at 1000 Mbps, full duplex [ 32.437742] tg3 0000:02:03.0: eth1: Flow control is off for TX and off for RX [ 32.437894] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 32.494668] tg3 0000:02:03.1: eth0: Link is up at 1000 Mbps, full duplex [ 32.494806] tg3 0000:02:03.1: eth0: Flow control is off for TX and off for RX [ 32.494948] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.559623] ip_tables: (C) 2000-2006 Netfilter Core Team [ 35.285735] warning: `named' uses 32-bit capabilities (legacy support in use) [ 84.837220] EDAC DEBUG: amd64_get_dram_hole_info: DHAR info for node 0 base 0xee000000 offset 0x12000000 size 0x12000000 ^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH] amd64_edac: Memory size reported double on processor family 0Fh 2012-09-21 14:54 ` Josh Hunt @ 2012-09-21 15:10 ` Borislav Petkov 0 siblings, 0 replies; 20+ messages in thread From: Borislav Petkov @ 2012-09-21 15:10 UTC (permalink / raw) To: Josh Hunt; +Cc: linux-edac, linux-kernel On Fri, Sep 21, 2012 at 09:54:09AM -0500, Josh Hunt wrote: > So this is correct now: > root@x.x.x.x:/sys/devices/system/edac/mc/mc0# grep . csrow*/size_mb > csrow0/size_mb:1024 > csrow1/size_mb:1024 > csrow2/size_mb:1024 > csrow3/size_mb:1024 Ok, that's the same box where free reports 4G. Btw, it is in dmesg too: [ 0.000000] TOM2: 0000000112000000 aka 4384M > But this is not: > root@x.x.x.x:/sys/devices/system/edac/mc/mc0# grep . size_mb > 8192 > > Attached patch seems to resolve reading size_mb from the mc in > sysfs. I'm also attaching the new dmesg. Yes, looks good. Will add it to my queue. Thanks. -- Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551 ^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2012-09-21 15:11 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1347403947-20187-1-git-send-email-johunt@akamai.com>
2012-09-11 23:02 ` [PATCH] amd64_edac: Memory size reported double on processor family 0Fh Josh Hunt
2012-09-12 8:51 ` Borislav Petkov
2012-09-12 12:38 ` Josh Hunt
2012-09-12 12:52 ` Josh Hunt
2012-09-12 15:30 ` Borislav Petkov
2012-09-12 15:37 ` Josh Hunt
2012-09-12 15:49 ` Borislav Petkov
2012-09-12 16:23 ` Josh Hunt
2012-09-12 16:48 ` Borislav Petkov
2012-09-12 16:58 ` Josh Hunt
2012-09-12 17:06 ` Borislav Petkov
2012-09-12 17:23 ` Borislav Petkov
2012-09-14 12:55 ` Josh Hunt
2012-09-14 14:39 ` Josh Hunt
2012-09-14 15:40 ` Borislav Petkov
2012-09-21 12:36 ` Borislav Petkov
2012-09-21 13:02 ` Josh Hunt
2012-09-21 14:01 ` Borislav Petkov
2012-09-21 14:54 ` Josh Hunt
2012-09-21 15:10 ` Borislav Petkov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).