* Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
@ 2013-07-18 8:41 Arend van Spriel
2013-07-18 8:59 ` Tony Lindgren
2013-07-18 11:18 ` Roger Quadros
0 siblings, 2 replies; 32+ messages in thread
From: Arend van Spriel @ 2013-07-18 8:41 UTC (permalink / raw)
To: tony; +Cc: linux-omap, linux-kernel, Roger Quadros
[-- Attachment #1: Type: text/plain, Size: 1327 bytes --]
Hi Tony,
We are using the panda board (es variant) for testing our SDIO based
chips. For this we have an adapter card connection to expansion
connector A. As this adapter is not publicly available we had internally
patched board-omap4panda.c. Also we follow the -rc releases and use TFTP
to boot the kernel image which requires USB.
Moving to 3.11-rc1 I found that the mentioned board file was removed by
your commit:
commit b42b918194c4791510ac049e3d507169a7de8544
Author: Tony Lindgren <tony@atomide.com>
Date: Thu May 30 12:53:05 2013 -0700
ARM: OMAP2+: Remove board-omap4panda.c
As our patches on that file are internal I do not hold it against you.
This is no regression and we need to fix it.
So my first step was to follow the recipe given in that commit. Beside
that I noticed a thread about USB issue on LKML so I also applied the
following commit:
commit 352f573e59050c7a604c35c58b4bbfc51edebbee
Author: Roger Quadros <rogerq@ti.com>
Date: Tue Jun 18 19:04:47 2013 +0300
ARM: OMAP2+: Provide alias to USB PHY clock
The attached kernel log seems to suggest that the device tree is picked
up by the kernel, but the USB does not seem very active. No ethernet
connectivity. This does seem a regression to me. Is there some other
patch that I need to get it going again?
Regards,
Arend
[-- Attachment #2: panda-dtb-append.log --]
[-- Type: text/plain, Size: 15444 bytes --]
U-Boot SPL 2011.09 (Jul 16 2013 - 13:59:31)
Texas Instruments OMAP4460 ES1.0
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2012.07 (Apr 25 2013 - 12:06:59)
CPU : OMAP4460 ES1.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 3 \b\b\b 2 \b\b\b 1 \b\b\b 0
reading boot.scr
210 bytes read
Running bootscript from mmc0 ...
## Executing script at 82000000
reading uImage
3959884 bytes read
Booting from mmc0 ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3959820 Bytes = 3.8 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.11.0-rc1-wl (jenkins@lb-bun-196.bun.broadcom.com) (gcc version 4.7.2 (crosstool-NG 1.17.0) ) #2 SMP Tue Jul 16 14:42:15 CEST 2013
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1544000 s14208 r8192 d14464 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368
[ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1024912K/1047552K available (5138K kernel code, 558K rwdata, 1860K rodata, 345K init, 5515K bss, 22640K reserved, 269312K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06ddb74 (6999 kB)
[ 0.000000] .init : 0xc06de000 - 0xc0734780 ( 346 kB)
[ 0.000000] .data : 0xc0736000 - 0xc07c1800 ( 558 kB)
[ 0.000000] .bss : 0xc07c1800 - 0xc0d24490 (5516 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] smp_twd: clock not found -2
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.001281] Calibrating delay loop... 1830.09 BogoMIPS (lpj=9150464)
[ 0.049865] pid_max: default: 32768 minimum: 301
[ 0.050292] Security Framework initialized
[ 0.050415] Mount-cache hash table entries: 512
[ 0.060607] CPU: Testing write buffer coherency: ok
[ 0.061828] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.061828] Calibrating local timer... 458.73MHz.
[ 0.119903] Setting up static identity map for 0xc04de4e8 - 0xc04de540
[ 0.119995] L310 cache controller enabled
[ 0.119995] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[ 0.123229] CPU1: Booted secondary processor
[ 0.179718] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.180053] Brought up 2 CPUs
[ 0.180084] SMP: Total of 2 processors activated (3660.18 BogoMIPS).
[ 0.180084] CPU: All CPU(s) started in SVC mode.
[ 0.181884] devtmpfs: initialized
[ 0.251678] pinctrl core: initialized pinctrl subsystem
[ 0.254028] regulator-dummy: no parameters
[ 0.255645] NET: Registered protocol family 16
[ 0.256713] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.313201] OMAP GPIO hardware version 0.1
[ 0.322235] omap-gpmc 50000000.gpmc: error: clk_get
[ 0.322265] omap-gpmc: probe of 50000000.gpmc failed with error -2
[ 0.343109] No ATAGs?
[ 0.343139] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.343139] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.345367] OMAP DMA hardware revision 0.0
[ 0.377136] bio: create slab <bio-0> at 0
[ 0.417968] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[ 0.419372] hsusb1_reset: 3300 mV
[ 0.420074] hsusb1_vbus: 3300 mV
[ 0.423339] SCSI subsystem initialized
[ 0.424438] usbcore: registered new interface driver usbfs
[ 0.424652] usbcore: registered new interface driver hub
[ 0.424957] usbcore: registered new device driver usb
[ 0.427154] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
[ 0.427154] platform 48070000.i2c: Driver omap_i2c requests probe deferral
[ 0.427215] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
[ 0.427246] platform 48072000.i2c: Driver omap_i2c requests probe deferral
[ 0.427276] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
[ 0.427307] platform 48060000.i2c: Driver omap_i2c requests probe deferral
[ 0.427337] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
[ 0.427368] platform 48350000.i2c: Driver omap_i2c requests probe deferral
[ 0.431579] Switched to clocksource 32k_counter
[ 0.506896] NET: Registered protocol family 2
[ 0.508178] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.508422] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.510437] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.510650] TCP: reno registered
[ 0.510681] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.510955] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.512084] NET: Registered protocol family 1
[ 0.512908] RPC: Registered named UNIX socket transport module.
[ 0.512939] RPC: Registered udp transport module.
[ 0.512939] RPC: Registered tcp transport module.
[ 0.512939] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.515838] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.516265] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.632232] bounce pool size: 64 pages
[ 0.632690] VFS: Disk quotas dquot_6.5.2
[ 0.632873] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.634643] NFS: Registering the id_resolver key type
[ 0.634918] Key type id_resolver registered
[ 0.634948] Key type id_legacy registered
[ 0.635009] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.635406] msgmni has been set to 1475
[ 0.638061] io scheduler noop registered
[ 0.638061] io scheduler deadline registered
[ 0.638153] io scheduler cfq registered (default)
[ 0.639343] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
[ 0.639739] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
[ 0.640563] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.644073] omap_uart 4806a000.serial: did not get pins for uart0 error: -19
[ 0.644714] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.645721] omap_uart 4806c000.serial: did not get pins for uart1 error: -19
[ 0.645965] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.646759] omap_uart 48020000.serial: did not get pins for uart2 error: -19
[ 0.647003] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 1.384918] console [ttyO2] enabled
[ 1.389282] omap_uart 4806e000.serial: did not get pins for uart3 error: -19
[ 1.397033] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 1.421691] brd: module loaded
[ 1.434448] loop: module loaded
[ 1.440856] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.454254] usbcore: registered new interface driver asix
[ 1.460144] usbcore: registered new interface driver cdc_ether
[ 1.466522] usbcore: registered new interface driver r815x
[ 1.472564] usbcore: registered new interface driver smsc95xx
[ 1.478790] usbcore: registered new interface driver net1080
[ 1.484985] usbcore: registered new interface driver cdc_subset
[ 1.491424] usbcore: registered new interface driver zaurus
[ 1.497558] usbcore: registered new interface driver cdc_ncm
[ 1.504333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.511230] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.586944] ehci-omap 4a064c00.ehci: EHCI Host Controller
[ 1.593963] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
[ 1.602325] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[ 1.621612] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[ 1.628356] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.635528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.643127] usb usb1: Product: EHCI Host Controller
[ 1.648254] usb usb1: Manufacturer: Linux 3.11.0-rc1-wl ehci_hcd
[ 1.654602] usb usb1: SerialNumber: 4a064c00.ehci
[ 1.661895] hub 1-0:1.0: USB hub found
[ 1.665924] hub 1-0:1.0: 3 ports detected
[ 1.672271] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.679046] ohci-omap3 4a064800.ohci: OMAP3 OHCI Host Controller
[ 1.685913] ohci-omap3 4a064800.ohci: new USB bus registered, assigned bus number 2
[ 1.694183] ohci-omap3 4a064800.ohci: irq 108, io mem 0x4a064800
[ 1.772125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.779266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.786865] usb usb2: Product: OMAP3 OHCI Host Controller
[ 1.792572] usb usb2: Manufacturer: Linux 3.11.0-rc1-wl ohci_hcd
[ 1.798858] usb usb2: SerialNumber: 4a064800.ohci
[ 1.805328] hub 2-0:1.0: USB hub found
[ 1.809295] hub 2-0:1.0: 3 ports detected
[ 1.814819] usbcore: registered new interface driver cdc_wdm
[ 1.821044] usbcore: registered new interface driver usb-storage
[ 1.829101] mousedev: PS/2 mouse device common for all mice
[ 1.837188] i2c /dev entries driver
[ 1.841064] Driver for 1-wire Dallas network protocol.
[ 1.849395] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.858734] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 1.866394] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 1.874053] omap_hsmmc 4809c000.mmc: vmmc regulator missing
[ 1.880096] omap-dma-engine 4a056000.dma-controller: freeing channel for 61
[ 1.887451] omap-dma-engine 4a056000.dma-controller: freeing channel for 62
[ 1.894805] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[ 1.902465] omap-dma-engine 4a056000.dma-controller: allocating channel for 60
[ 1.910064] omap-dma-engine 4a056000.dma-controller: allocating channel for 59
[ 1.917724] omap_hsmmc 480d5000.mmc: vmmc regulator missing
[ 1.923614] omap-dma-engine 4a056000.dma-controller: freeing channel for 59
[ 1.930938] omap-dma-engine 4a056000.dma-controller: freeing channel for 60
[ 1.941192] usbcore: registered new interface driver usbhid
[ 1.947052] usbhid: USB HID core driver
[ 1.951934] oprofile: using arm/armv7-ca9
[ 1.956604] TCP: cubic registered
[ 1.960113] Initializing XFRM netlink socket
[ 1.964691] NET: Registered protocol family 17
[ 1.969390] NET: Registered protocol family 15
[ 1.974334] Key type dns_resolver registered
[ 1.978912] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 1.987731] Power Management for TI OMAP4+ devices.
[ 1.992919] Power Management for TI OMAP4.
[ 1.997222] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[ 2.004425] ThumbEE CPU extension supported.
[ 2.004425] Registering SWP/SWPB emulation handler
[ 2.018768] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[ 2.027191] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 2.038055] twl 0-0048: PIH (irq 39) chaining IRQs 416..436
[ 2.045074] twl_rtc rtc.11: Power up reset detected.
[ 2.051269] twl_rtc rtc.11: Enabling TWL-RTC
[ 2.059448] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0
[ 2.067565] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
[ 2.074493] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 2.081329] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 2.088287] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 2.094604] VPP: 1800 <--> 2500 mV at 1900 mV
[ 2.100769] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 2.107025] VDAC: 1800 mV
[ 2.110961] VANA: 2100 mV
[ 2.115325] VCXIO: 1800 mV
[ 2.119384] VUSB: 3300 mV
[ 2.123748] V1V8: 1800 mV
[ 2.128082] V2V1: 2100 mV
[ 2.135742] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
[ 2.143127] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
[ 2.150848] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
[ 2.157318] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 2.165100] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 2.175354] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[ 2.326019] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 2.337005] Waiting for root device /dev/mmcblk0p2...
[ 2.472503] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.484741] mmc0: new high speed SDHC card at address e624
[ 2.492034] mmcblk0: mmc0:e624 SD04G 3.69 GiB
[ 2.511779] mmcblk0: p1 p2
[ 2.680480] kjournald starting. Commit interval 5 seconds
[ 2.689025] EXT3-fs (mmcblk0p2): using internal journal
[ 2.696990] EXT3-fs (mmcblk0p2): recovery complete
[ 2.702117] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 2.702117] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 2.721740] devtmpfs: mounted
[ 2.725585] Freeing unused kernel memory: 344K (c06de000 - c0734000)
Starting logging: OK
Initializing random number generator... done.
Starting network...
Starting sshd: OK
Welcome to Buildroot
buildroot login:
[-- Attachment #3: panda-es-config --]
[-- Type: text/plain, Size: 70418 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.11.0-rc1 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_SPARSE_IRQ=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_UIDGID_CONVERTED=y
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
#
# Multiple platform selection
#
#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MXC is not set
#
# TI OMAP Common Features
#
#
# OMAP Feature Selections
#
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y
# CONFIG_SOC_AM43XX is not set
CONFIG_ARCH_OMAP2PLUS=y
#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_HAS_REALTIME_COUNTER=y
CONFIG_SOC_OMAP3430=y
CONFIG_SOC_TI81XX=y
CONFIG_OMAP_PACKAGE_CBB=y
CONFIG_OMAP_PACKAGE_CUS=y
CONFIG_OMAP_PACKAGE_CBP=y
#
# OMAP Board Type
#
CONFIG_MACH_OMAP3_BEAGLE=y
CONFIG_MACH_DEVKIT8000=y
CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OMAP3530_LV_SOM=y
CONFIG_MACH_OMAP3_TORPEDO=y
CONFIG_MACH_OVERO=y
CONFIG_MACH_OMAP3EVM=y
CONFIG_MACH_OMAP3517EVM=y
# CONFIG_MACH_CRANEBOARD is not set
CONFIG_MACH_OMAP3_PANDORA=y
CONFIG_MACH_TOUCHBOOK=y
CONFIG_MACH_OMAP_3430SDP=y
CONFIG_MACH_NOKIA_RM680=y
CONFIG_MACH_NOKIA_RX51=y
CONFIG_MACH_OMAP_ZOOM2=y
CONFIG_MACH_OMAP_ZOOM3=y
CONFIG_MACH_CM_T35=y
CONFIG_MACH_CM_T3517=y
CONFIG_MACH_CM_T3730=y
CONFIG_MACH_IGEP0020=y
CONFIG_MACH_IGEP0030=y
CONFIG_MACH_SBC3530=y
CONFIG_MACH_OMAP_3630SDP=y
CONFIG_MACH_TI8168EVM=y
CONFIG_MACH_TI8148EVM=y
# CONFIG_OMAP3_EMU is not set
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
#
# ST-Ericsson AB U300/U335 Platform
#
#
# ST-Ericsson Mobile Platform Products
#
#
# ST-Ericsson U300/U335 Feature Selections
#
# CONFIG_ARCH_U8500 is not set
CONFIG_ARCH_VEXPRESS=y
#
# Versatile Express platform type
#
# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
# CONFIG_ARCH_VEXPRESS_CA9X4 is not set
CONFIG_PLAT_VERSATILE_CLCD=y
CONFIG_PLAT_VERSATILE_SCHED_CLOCK=y
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set
CONFIG_PLAT_VERSATILE=y
CONFIG_ARM_TIMER_SP804=y
#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_SWP_EMULATE=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_CACHE_L2X0=y
CONFIG_CACHE_PL310=y
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_NR_BANKS=8
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_430973 is not set
CONFIG_PL310_ERRATA_588369=y
# CONFIG_ARM_ERRATA_643719 is not set
CONFIG_ARM_ERRATA_720789=y
CONFIG_PL310_ERRATA_727915=y
# CONFIG_PL310_ERRATA_753970 is not set
CONFIG_ARM_ERRATA_754322=y
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_764369 is not set
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_ERRATA_798181=y
CONFIG_ICST=y
CONFIG_TI_PRIV_EDMA=y
#
# Bus support
#
CONFIG_ARM_AMBA=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not set
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_TWD=y
# CONFIG_MCPM is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
# CONFIG_ARM_PSCI is not set
CONFIG_LOCAL_TIMERS=y
CONFIG_ARCH_NR_GPIO=512
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_ZBUD is not set
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_XEN is not set
#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_HAS_OPP=y
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NET_LL_RX_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
# CONFIG_DMA_SHARED_BUFFER is not set
# CONFIG_CMA is not set
#
# Bus devices
#
# CONFIG_OMAP_OCP2SCP is not set
CONFIG_OMAP_INTERCONNECT=y
# CONFIG_ARM_CCI is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
# CONFIG_MTD_NAND_OMAP_BCH is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_ARM_CHARLCD is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_HAVE_PATA_PLATFORM=y
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_ARC=y
# CONFIG_ARC_EMAC is not set
CONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0 is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_AX88796 is not set
# CONFIG_ETHOC is not set
# CONFIG_SH_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=y
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
# CONFIG_SMSC911X_ARCH_HOOKS is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_DAVINCI_EMAC is not set
# CONFIG_TI_DAVINCI_MDIO is not set
# CONFIG_TI_DAVINCI_CPDMA is not set
# CONFIG_TI_CPSW is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_CDC_NCM=y
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
CONFIG_WLAN=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_WL_TI is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_CYPRESS is not set
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_AMBAKMI is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_ATMEL is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_PL022 is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_PL061 is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_GRGPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
#
# USB GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_HDQ_MASTER_OMAP is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_VEXPRESS=y
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VEXPRESS is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_OMAP_USB_HOST=y
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
CONFIG_TWL4030_POWER=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_VEXPRESS_CONFIG=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_VEXPRESS is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_TEGRA_HOST1X is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_OMAP2_DSS is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_HCD_OMAP=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_OMAP3=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_CONTROL_USB=y
CONFIG_OMAP_USB2=y
CONFIG_OMAP_USB3=y
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_ULPI is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_ARMMMCI=y
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_RENESAS_TPU is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_OMAP is not set
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
# CONFIG_RTC_DRV_SNVS is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_AMBA_PL08X is not set
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_TI_EDMA is not set
# CONFIG_PL330_DMA is not set
CONFIG_DMA_OMAP=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_DEBUG is not set
CONFIG_COMMON_CLK_VERSATILE=y
# CONFIG_COMMON_CLK_SI5351 is not set
#
# Hardware Spinlock drivers
#
# CONFIG_HWSPINLOCK_OMAP is not set
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
CONFIG_ARM_ARCH_TIMER=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
# CONFIG_OMAP_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_OC_ETM is not set
# CONFIG_ARM_KPROBES_TEST is not set
# CONFIG_PID_IN_CONTEXTIDR is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
# CONFIG_DDR is not set
CONFIG_OID_REGISTRY=y
# CONFIG_VIRTUALIZATION is not set
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 8:41 Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet Arend van Spriel
@ 2013-07-18 8:59 ` Tony Lindgren
2013-07-18 10:18 ` Arend van Spriel
` (2 more replies)
2013-07-18 11:18 ` Roger Quadros
1 sibling, 3 replies; 32+ messages in thread
From: Tony Lindgren @ 2013-07-18 8:59 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-omap, linux-kernel, Roger Quadros
* Arend van Spriel <arend@broadcom.com> [130718 01:47]:
>
> We are using the panda board (es variant) for testing our SDIO based
> chips. For this we have an adapter card connection to expansion
> connector A. As this adapter is not publicly available we had
> internally patched board-omap4panda.c. Also we follow the -rc
> releases and use TFTP to boot the kernel image which requires USB.
>
> Moving to 3.11-rc1 I found that the mentioned board file was removed
> by your commit:
>
> commit b42b918194c4791510ac049e3d507169a7de8544
> Author: Tony Lindgren <tony@atomide.com>
> Date: Thu May 30 12:53:05 2013 -0700
>
> ARM: OMAP2+: Remove board-omap4panda.c
>
> As our patches on that file are internal I do not hold it against
> you. This is no regression and we need to fix it.
Right, we need to move on to device tree based booting. Most of
it should be pretty trivial configuring of the .dts file and
some .config changes so whatever issues are remaining should
be out of the way by v3.11.
> So my first step was to follow the recipe given in that commit.
> Beside that I noticed a thread about USB issue on LKML so I also
> applied the following commit:
>
> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
> Author: Roger Quadros <rogerq@ti.com>
> Date: Tue Jun 18 19:04:47 2013 +0300
>
> ARM: OMAP2+: Provide alias to USB PHY clock
>
> The attached kernel log seems to suggest that the device tree is
> picked up by the kernel, but the USB does not seem very active. No
> ethernet connectivity. This does seem a regression to me. Is there
> some other patch that I need to get it going again?
There are few .dts related patches missing for USB. Roger can
point you to the current versions that Benoit should be queueing
for the -rc series.
Then for the SDIO with device tree, take a look at the following
patches:
[PATCH 0/3] WLAN support for omap4 when booted with devicetree
http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
The wl12xx .dts changes for pandaboard are still missing too.
Then I'll be updating these soonish:
[PATCH 0/4] Updated omap_hsmmc SDIO and remuxing patches
Those are needed for the SDIO interrupt, SDIO will work also
without those.
Regards,
Tony
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 8:59 ` Tony Lindgren
@ 2013-07-18 10:18 ` Arend van Spriel
2013-07-19 10:36 ` Arend van Spriel
2013-07-20 7:38 ` Luciano Coelho
2 siblings, 0 replies; 32+ messages in thread
From: Arend van Spriel @ 2013-07-18 10:18 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, linux-kernel, Roger Quadros
On 07/18/2013 10:59 AM, Tony Lindgren wrote:
> * Arend van Spriel <arend@broadcom.com> [130718 01:47]:
>> So my first step was to follow the recipe given in that commit.
>> Beside that I noticed a thread about USB issue on LKML so I also
>> applied the following commit:
>>
>> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
>> Author: Roger Quadros <rogerq@ti.com>
>> Date: Tue Jun 18 19:04:47 2013 +0300
>>
>> ARM: OMAP2+: Provide alias to USB PHY clock
>>
>> The attached kernel log seems to suggest that the device tree is
>> picked up by the kernel, but the USB does not seem very active. No
>> ethernet connectivity. This does seem a regression to me. Is there
>> some other patch that I need to get it going again?
>
> There are few .dts related patches missing for USB. Roger can
> point you to the current versions that Benoit should be queueing
> for the -rc series.
Hope Roger or Benoit will chime in.
> Then for the SDIO with device tree, take a look at the following
> patches:
>
> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>
> The wl12xx .dts changes for pandaboard are still missing too.
>
> Then I'll be updating these soonish:
> [PATCH 0/4] Updated omap_hsmmc SDIO and remuxing patches
>
> Those are needed for the SDIO interrupt, SDIO will work also
> without those.
Thanks for the pointers,
Arend
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 8:41 Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet Arend van Spriel
2013-07-18 8:59 ` Tony Lindgren
@ 2013-07-18 11:18 ` Roger Quadros
2013-07-18 11:24 ` Arend van Spriel
1 sibling, 1 reply; 32+ messages in thread
From: Roger Quadros @ 2013-07-18 11:18 UTC (permalink / raw)
To: Arend van Spriel; +Cc: tony, linux-omap, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1948 bytes --]
Hi Arend,
On 07/18/2013 11:41 AM, Arend van Spriel wrote:
> Hi Tony,
>
>
> We are using the panda board (es variant) for testing our SDIO based chips. For this we have an adapter card connection to expansion connector A. As this adapter is not publicly available we had internally patched board-omap4panda.c. Also we follow the -rc releases and use TFTP to boot the kernel image which requires USB.
>
> Moving to 3.11-rc1 I found that the mentioned board file was removed by your commit:
>
> commit b42b918194c4791510ac049e3d507169a7de8544
> Author: Tony Lindgren <tony@atomide.com>
> Date: Thu May 30 12:53:05 2013 -0700
>
> ARM: OMAP2+: Remove board-omap4panda.c
>
> As our patches on that file are internal I do not hold it against you. This is no regression and we need to fix it.
>
> So my first step was to follow the recipe given in that commit. Beside that I noticed a thread about USB issue on LKML so I also applied the following commit:
>
> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
> Author: Roger Quadros <rogerq@ti.com>
> Date: Tue Jun 18 19:04:47 2013 +0300
>
> ARM: OMAP2+: Provide alias to USB PHY clock
>
> The attached kernel log seems to suggest that the device tree is picked up by the kernel, but the USB does not seem very active. No ethernet connectivity. This does seem a regression to me. Is there some other patch that I need to get it going again?
>
I tried with your config and 3.11-rc1 kernel with the above commit on top and ethernet seems to
work for me. My boot log is attached.
Are you sure that you are building the DTB for panda-es and the bootloader is picking up the right file and
not an outdated one?
Why is the version of SPL loader and u-boot different in your log?
You need to use the MLO file generated by the u-boot build along with the uImage.
Just to be sure we are on the same setup could you please try with latest u-boot release (2013-04). Thanks.
cheers,
-roger
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: panda-es-boot.log --]
[-- Type: text/x-log; name="panda-es-boot.log", Size: 24505 bytes --]
U-Boot SPL 2013.04 (Jul 18 2013 - 14:04:55)
OMAP4460 ES1.1
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2013.04 (Jul 18 2013 - 14:04:55)
CPU : OMAP4460 ES1.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
409 bytes read in 3 ms (132.8 KiB/s)
Running bootscript from mmc0 ...
## Executing script at 82000000
reading omap4-panda.dtb
18588 bytes read in 6 ms (3 MiB/s)
reading uImage
3947784 bytes read in 189 ms (19.9 MiB/s)
## Booting kernel from Legacy Image at 80300000 ...
Image Name: Linux-3.11.0-rc1-00001-g4861de4
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3947720 Bytes = 3.8 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 825f0000
Booting using the fdt blob at 0x825f0000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 825f0000, end 825f789b
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.11.0-rc1-00001-g4861de4 (roger@rockdesk) (gcc version 4.7.1 20120531 (prerelease) (crosstool-NG linaro-1.13.1-2012.06-20120625 - Linaro GCC 2012.06) ) #862 SMP Thu Jul 18 14:10:14 EEST 2013
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 261888
[ 0.000000] free_area_init_node: node 0, pgdat c07b9500, node_mem_map c0d21000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67328 pages, LIFO batch:15
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c153b000 s14208 r8192 d14464 u36864
[ 0.000000] pcpu-alloc: s14208 r8192 d14464 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368
[ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 rootwait debug earlyprintk loglevel=8
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1024916K/1047552K available (5122K kernel code, 558K rwdata, 1860K rodata, 345K init, 5515K bss, 22636K reserved, 269312K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d9cf0 (6984 kB)
[ 0.000000] .init : 0xc06da000 - 0xc0730780 ( 346 kB)
[ 0.000000] .data : 0xc0732000 - 0xc07bd800 ( 558 kB)
[ 0.000000] .bss : 0xc07bd800 - 0xc0d20490 (5516 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] smp_twd: clock not found -2
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.001556] Calibrating delay loop... 1391.00 BogoMIPS (lpj=6955008)
[ 0.079681] pid_max: default: 32768 minimum: 301
[ 0.080230] Security Framework initialized
[ 0.080383] Mount-cache hash table entries: 512
[ 0.093414] CPU: Testing write buffer coherency: ok
[ 0.094818] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.094848] Calibrating local timer... 348.97MHz.
[ 0.149810] Setting up static identity map for 0xc04da590 - 0xc04da5e8
[ 0.149902] L310 cache controller enabled
[ 0.149932] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[ 0.154083] CPU1: Booted secondary processor
[ 0.189636] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.190063] Brought up 2 CPUs
[ 0.190093] SMP: Total of 2 processors activated (2782.00 BogoMIPS).
[ 0.190093] CPU: All CPU(s) started in SVC mode.
[ 0.192443] devtmpfs: initialized
[ 0.268890] pinctrl core: initialized pinctrl subsystem
[ 0.271942] regulator-dummy: no parameters
[ 0.274017] NET: Registered protocol family 16
[ 0.275451] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.343749] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.344848] OMAP GPIO hardware version 0.1
[ 0.346374] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.348480] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.350585] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.352661] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[ 0.354766] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[ 0.356414] omap-gpmc 50000000.gpmc: error: clk_get
[ 0.356445] omap-gpmc: probe of 50000000.gpmc failed with error -2
[ 0.383697] No ATAGs?
[ 0.383728] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.383758] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.386596] OMAP DMA hardware revision 0.0
[ 0.427398] bio: create slab <bio-0> at 0
[ 0.479522] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[ 0.480438] of_get_named_gpio_flags exited with status 62
[ 0.481231] hsusb1_reset: 3300 mV
[ 0.481567] of_get_named_gpio_flags exited with status 1
[ 0.482086] hsusb1_vbus: 3300 mV
[ 0.486206] SCSI subsystem initialized
[ 0.487640] usbcore: registered new interface driver usbfs
[ 0.487945] usbcore: registered new interface driver hub
[ 0.488342] usbcore: registered new device driver usb
[ 0.491210] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
[ 0.491241] platform 48070000.i2c: Driver omap_i2c requests probe deferral
[ 0.491302] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
[ 0.491333] platform 48072000.i2c: Driver omap_i2c requests probe deferral
[ 0.491394] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
[ 0.491424] platform 48060000.i2c: Driver omap_i2c requests probe deferral
[ 0.491485] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
[ 0.491485] platform 48350000.i2c: Driver omap_i2c requests probe deferral
[ 0.496887] Switched to clocksource 32k_counter
[ 0.594238] NET: Registered protocol family 2
[ 0.595886] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.596191] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.598846] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.599090] TCP: reno registered
[ 0.599121] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.599456] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.600769] NET: Registered protocol family 1
[ 0.601806] RPC: Registered named UNIX socket transport module.
[ 0.601837] RPC: Registered udp transport module.
[ 0.601837] RPC: Registered tcp transport module.
[ 0.601837] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.605560] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.606048] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.764770] bounce pool size: 64 pages
[ 0.765319] VFS: Disk quotas dquot_6.5.2
[ 0.765563] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.767883] NFS: Registering the id_resolver key type
[ 0.768218] Key type id_resolver registered
[ 0.768249] Key type id_legacy registered
[ 0.768371] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
[ 0.768859] msgmni has been set to 1475
[ 0.772247] io scheduler noop registered
[ 0.772277] io scheduler deadline registered
[ 0.772369] io scheduler cfq registered (default)
[ 0.773895] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
[ 0.774414] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
[ 0.775512] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.780151] omap_uart 4806a000.serial: did not get pins for uart0 error: -19
[ 0.780975] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.782379] omap_uart 4806c000.serial: did not get pins for uart1 error: -19
[ 0.782714] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.783630] omap_uart 48020000.serial: did not get pins for uart2 error: -19
[ 0.783966] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 1.632232] console [ttyO2] enabled
[ 1.636779] omap_uart 4806e000.serial: did not get pins for uart3 error: -19
[ 1.644592] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 1.674072] brd: module loaded
[ 1.689697] loop: module loaded
[ 1.696960] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.711608] usbcore: registered new interface driver asix
[ 1.717620] usbcore: registered new interface driver cdc_ether
[ 1.724060] usbcore: registered new interface driver r815x
[ 1.730194] usbcore: registered new interface driver smsc95xx
[ 1.736541] usbcore: registered new interface driver net1080
[ 1.742828] usbcore: registered new interface driver cdc_subset
[ 1.749359] usbcore: registered new interface driver zaurus
[ 1.755554] usbcore: registered new interface driver cdc_ncm
[ 1.762542] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.769470] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.775726] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.851470] ehci-omap 4a064c00.ehci: failed to get phys phandle in /ocp/usbhshost@4a064000/ehci@4a064c00 node
[ 1.861999] ehci-omap 4a064c00.ehci: EHCI Host Controller
[ 1.869476] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
[ 1.877502] ehci-omap 4a064c00.ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
[ 1.886505] ehci-omap 4a064c00.ehci: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM
[ 1.896240] ehci-omap 4a064c00.ehci: park 0
[ 1.900756] ehci-omap 4a064c00.ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.910369] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[ 1.916625] ehci-omap 4a064c00.ehci: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 1.936889] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[ 1.943725] usb usb1: default language 0x0409
[ 1.948425] usb usb1: udev 1, busnum 1, minor = 0
[ 1.953399] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.960571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.968200] usb usb1: Product: EHCI Host Controller
[ 1.973358] usb usb1: Manufacturer: Linux 3.11.0-rc1-00001-g4861de4 ehci_hcd
[ 1.980804] usb usb1: SerialNumber: 4a064c00.ehci
[ 1.987426] usb usb1: usb_probe_device
[ 1.991363] usb usb1: configuration #1 chosen from 1 choice
[ 1.997711] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.004516] hub 1-0:1.0: usb_probe_interface
[ 2.009063] hub 1-0:1.0: usb_probe_interface - got id
[ 2.014434] hub 1-0:1.0: USB hub found
[ 2.018524] hub 1-0:1.0: 3 ports detected
[ 2.022735] hub 1-0:1.0: standalone hub
[ 2.026855] hub 1-0:1.0: individual port power switching
[ 2.032440] hub 1-0:1.0: individual port over-current protection
[ 2.038787] hub 1-0:1.0: power on to power good time: 20ms
[ 2.044860] hub 1-0:1.0: local power source is good
[ 2.051025] hub 1-0:1.0: enabling power on all ports
[ 2.057922] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.064453] ohci_hcd: block sizes: ed 64 td 64
[ 2.069519] ohci-omap3 4a064800.ohci: OMAP3 OHCI Host Controller
[ 2.076507] ohci-omap3 4a064800.ohci: new USB bus registered, assigned bus number 2
[ 2.084625] ohci-omap3 4a064800.ohci: starting OHCI controller
[ 2.090942] ohci-omap3 4a064800.ohci: created debug files
[ 2.096679] ohci-omap3 4a064800.ohci: irq 108, io mem 0x4a064800
[ 2.147155] ehci-omap 4a064c00.ehci: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.156616] hub 1-0:1.0: port 1: status 0501 change 0001
[ 2.182525] ohci-omap3 4a064800.ohci: OHCI controller state
[ 2.188446] ohci-omap3 4a064800.ohci: OHCI 1.0, NO legacy support registers, rh state running
[ 2.197448] ohci-omap3 4a064800.ohci: control 0x283 RWC HCFS=operational CBSR=3
[ 2.205169] ohci-omap3 4a064800.ohci: cmdstatus 0x00000 SOC=0
[ 2.211242] ohci-omap3 4a064800.ohci: intrstatus 0x00000004 SF
[ 2.217407] ohci-omap3 4a064800.ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 2.225036] ohci-omap3 4a064800.ohci: hcca frame #003f
[ 2.230468] ohci-omap3 4a064800.ohci: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3)
[ 2.238189] ohci-omap3 4a064800.ohci: roothub.b 00000000 PPCM=0000 DR=0000
[ 2.245452] ohci-omap3 4a064800.ohci: roothub.status 00008000 DRWE
[ 2.251983] ohci-omap3 4a064800.ohci: roothub.portstatus [0] 0x00000100 PPS
[ 2.259368] ohci-omap3 4a064800.ohci: roothub.portstatus [1] 0x00000100 PPS
[ 2.266693] ohci-omap3 4a064800.ohci: roothub.portstatus [2] 0x00000100 PPS
[ 2.274139] usb usb2: default language 0x0409
[ 2.278839] usb usb2: udev 1, busnum 2, minor = 128
[ 2.283966] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.291137] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.298797] usb usb2: Product: OMAP3 OHCI Host Controller
[ 2.304473] usb usb2: Manufacturer: Linux 3.11.0-rc1-00001-g4861de4 ohci_hcd
[ 2.311920] usb usb2: SerialNumber: 4a064800.ohci
[ 2.317169] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 2.323028] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.330657] usb usb2: usb_probe_device
[ 2.334625] usb usb2: configuration #1 chosen from 1 choice
[ 2.340606] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.347198] hub 2-0:1.0: usb_probe_interface
[ 2.351715] hub 2-0:1.0: usb_probe_interface - got id
[ 2.357055] hub 2-0:1.0: USB hub found
[ 2.361053] hub 2-0:1.0: 3 ports detected
[ 2.365295] hub 2-0:1.0: standalone hub
[ 2.369354] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.374664] hub 2-0:1.0: global over-current protection
[ 2.380187] hub 2-0:1.0: power on to power good time: 20ms
[ 2.386016] hub 2-0:1.0: local power source is good
[ 2.391204] hub 2-0:1.0: no over-current condition exists
[ 2.397125] ehci-omap 4a064c00.ehci: port 1 reset complete, port enabled
[ 2.397369] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.398529] usbcore: registered new interface driver cdc_wdm
[ 2.398925] usbcore: registered new interface driver usb-storage
[ 2.423706] ehci-omap 4a064c00.ehci: GetStatus port:1 status 001805 0 ACK POWER sig=j PE CONNECT
[ 2.434143] mousedev: PS/2 mouse device common for all mice
[ 2.442932] i2c /dev entries driver
[ 2.446929] Driver for 1-wire Dallas network protocol.
[ 2.455871] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 2.465362] of_get_named_gpio_flags: can't parse gpios property
[ 2.471618] of_get_named_gpio_flags: can't parse gpios property
[ 2.478271] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 2.485931] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 2.486938] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 2.501037] omap_hsmmc 4809c000.mmc: vmmc regulator missing
[ 2.507202] omap-dma-engine 4a056000.dma-controller: freeing channel for 61
[ 2.514556] omap-dma-engine 4a056000.dma-controller: freeing channel for 62
[ 2.521972] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[ 2.529510] of_get_named_gpio_flags: can't parse gpios property
[ 2.535736] of_get_named_gpio_flags: can't parse gpios property
[ 2.542175] omap-dma-engine 4a056000.dma-controller: allocating channel for 60
[ 2.549865] omap-dma-engine 4a056000.dma-controller: allocating channel for 59
[ 2.557128] ehci-omap 4a064c00.ehci: port 1 reset complete, port enabled
[ 2.557128] ehci-omap 4a064c00.ehci: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.574096] omap_hsmmc 480d5000.mmc: vmmc regulator missing
[ 2.580017] omap-dma-engine 4a056000.dma-controller: freeing channel for 59
[ 2.587402] omap-dma-engine 4a056000.dma-controller: freeing channel for 60
[ 2.595672] of_get_named_gpio_flags exited with status 110
[ 2.601501] of_get_named_gpio_flags exited with status 8
[ 2.607116] of_get_named_gpio_flags exited with status 110
[ 2.613800] of_get_named_gpio_flags exited with status 8
[ 2.621185] usbcore: registered new interface driver usbhid
[ 2.627105] usbhid: USB HID core driver
[ 2.632049] oprofile: using arm/armv7-ca9
[ 2.636901] TCP: cubic registered
[ 2.640380] Initializing XFRM netlink socket
[ 2.644989] NET: Registered protocol family 17
[ 2.649780] NET: Registered protocol family 15
[ 2.654693] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.654815] Key type dns_resolver registered
[ 2.664031] VFP support v0.3: [ 2.664093] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.664093] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.665100] usb 1-1: usb_probe_device
[ 2.665130] usb 1-1: configuration #1 chosen from 1 choice
implementor 41 architecture 3 part 30 variant 9 rev 4
[ 2.691406] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.691925] hub 1-1:1.0: usb_probe_interface
[ 2.691925] hub 1-1:1.0: usb_probe_interface - got id
[ 2.691986] hub 1-1:1.0: USB hub found
[ 2.716125] hub 1-1:1.0: 5 ports detected
[ 2.720397] hub 1-1:1.0: compound device; port removable status: FRRRR
[ 2.727294] hub 1-1:1.0: individual port power switching
[ 2.727386] Power Management for TI OMAP4+ devices.
[ 2.727447] Power Management for TI OMAP4.
[ 2.727447] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[ 2.727600] ThumbEE CPU extension supported.
[ 2.727630] Registering SWP/SWPB emulation handler
[ 2.759155] hub 1-1:1.0: individual port over-current protection
[ 2.766204] hub 1-1:1.0: TT per port
[ 2.766906] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.776855] hub 1-1:1.0: power on to power good time: 100ms
[ 2.783325] hub 1-1:1.0: local power source is good
[ 2.788543] hub 1-1:1.0: enabling power on all ports
[ 2.797088] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 2.803131] hub 2-0:1.0: hub_suspend
[ 2.806976] usb usb2: bus auto-suspend, wakeup 1
[ 2.809997] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[ 2.813385] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 2.827423] ohci-omap3 4a064800.ohci: suspend root hub
[ 2.833465] twl 0-0048: PIH (irq 39) chaining IRQs 416..436
[ 2.841003] twl_rtc rtc.11: Power up reset detected.
[ 2.847351] twl_rtc rtc.11: Enabling TWL-RTC
[ 2.856262] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0
[ 2.864654] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
[ 2.871978] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 2.879150] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 2.886444] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 2.893035] VPP: 1800 <--> 2500 mV at 1900 mV
[ 2.899597] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 2.906188] VDAC: 1800 mV
[ 2.908050] hub 1-1:1.0: port 1: status 0101 change 0001
[ 2.916168] VANA: 2100 mV
[ 2.920837] VCXIO: 1800 mV
[ 2.925354] VUSB: 3300 mV
[ 2.930053] V1V8: 1800 mV
[ 2.934692] V2V1: 2100 mV
[ 2.943328] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
[ 2.950775] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
[ 2.959197] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
[ 2.959197] of_get_named_gpio_flags: can't parse gpios property
[ 2.971710] of_get_named_gpio_flags: can't parse gpios property
[ 2.978271] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 2.981964] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 2.996551] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[ 3.006958] usb 1-1: link qh256-0001/eed6c400 start 1 [1/0 us]
[ 3.013275] hub 1-1:1.0: state 7 ports 5 chg 0002 evt 0000
[ 3.019287] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 3.053314] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.065124] Waiting for root device /dev/mmcblk0p2...
[ 3.107788] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 3.300201] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.310699] mmc0: new high speed SDHC card at address b368
[ 3.318450] mmcblk0: mmc0:b368 AF SD 7.51 GiB
[ 3.323791] usb 1-1.1: udev 3, busnum 1, minor = 2
[ 3.328948] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.336273] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.344482] mmcblk0: p1 p2
[ 3.348754] usb 1-1.1: usb_probe_device
[ 3.352844] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.362884] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[ 3.369781] smsc95xx 1-1.1:1.0: usb_probe_interface
[ 3.374999] smsc95xx 1-1.1:1.0: usb_probe_interface - got id
[ 3.381042] smsc95xx v1.0.4
[ 5.013549] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 3a:e3:cb:1b:0e:02
[ 5.026184] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
[ 5.139648] kjournald starting. Commit interval 5 seconds
[ 5.139648] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 5.139648] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
[ 5.161193] devtmpfs: mounted
[ 5.161682] Freeing unused kernel memory: 344K (c06da000 - c0730000)
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 6.236877] udevd[890]: starting version 175
. ok
[....] Synthesizing the initial hotplug events...done.
[....] Waiting for /dev to be fully populated...done.
[....] Activating swap...done.
[ 8.382934] EXT3-fs (mmcblk0p2): using internal journal
[....] Cleaning up temporary files... /tmp. ok
[....] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[....] Mounting local filesystems...done.
[....] Activating swapfile swap...done.
[....] Cleaning up temporary files.... ok
[....] Cleaning up temporary files.... ok
[....] Setting kernel variables ...done.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
Debian GNU/Linux 7.0 rockdesk ttyO2
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 11:18 ` Roger Quadros
@ 2013-07-18 11:24 ` Arend van Spriel
2013-07-18 11:30 ` Roger Quadros
0 siblings, 1 reply; 32+ messages in thread
From: Arend van Spriel @ 2013-07-18 11:24 UTC (permalink / raw)
To: Roger Quadros; +Cc: tony, linux-omap, linux-kernel
On 07/18/2013 01:18 PM, Roger Quadros wrote:
> Hi Arend,
>
> On 07/18/2013 11:41 AM, Arend van Spriel wrote:
>> Hi Tony,
>>
>>
>> We are using the panda board (es variant) for testing our SDIO based chips. For this we have an adapter card connection to expansion connector A. As this adapter is not publicly available we had internally patched board-omap4panda.c. Also we follow the -rc releases and use TFTP to boot the kernel image which requires USB.
>>
>> Moving to 3.11-rc1 I found that the mentioned board file was removed by your commit:
>>
>> commit b42b918194c4791510ac049e3d507169a7de8544
>> Author: Tony Lindgren <tony@atomide.com>
>> Date: Thu May 30 12:53:05 2013 -0700
>>
>> ARM: OMAP2+: Remove board-omap4panda.c
>>
>> As our patches on that file are internal I do not hold it against you. This is no regression and we need to fix it.
>>
>> So my first step was to follow the recipe given in that commit. Beside that I noticed a thread about USB issue on LKML so I also applied the following commit:
>>
>> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
>> Author: Roger Quadros <rogerq@ti.com>
>> Date: Tue Jun 18 19:04:47 2013 +0300
>>
>> ARM: OMAP2+: Provide alias to USB PHY clock
>>
>> The attached kernel log seems to suggest that the device tree is picked up by the kernel, but the USB does not seem very active. No ethernet connectivity. This does seem a regression to me. Is there some other patch that I need to get it going again?
>>
>
> I tried with your config and 3.11-rc1 kernel with the above commit on top and ethernet seems to
> work for me. My boot log is attached.
>
> Are you sure that you are building the DTB for panda-es and the bootloader is picking up the right file and
> not an outdated one?
I appended the DTB to the kernel image thus avoiding the need to update
u-boot (at least that is what I understood from Tony's commit).
> Why is the version of SPL loader and u-boot different in your log?
> You need to use the MLO file generated by the u-boot build along with the uImage.
>
> Just to be sure we are on the same setup could you please try with latest u-boot release (2013-04). Thanks.
I recall having difficulty with TFTP boot using a 2013 u-boot release,
but that hurdle is for later. I will try.
> cheers,
> -roger
Thanks,
Arend
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 11:24 ` Arend van Spriel
@ 2013-07-18 11:30 ` Roger Quadros
2013-07-18 12:38 ` Arend van Spriel
0 siblings, 1 reply; 32+ messages in thread
From: Roger Quadros @ 2013-07-18 11:30 UTC (permalink / raw)
To: Arend van Spriel; +Cc: tony, linux-omap, linux-kernel
On 07/18/2013 02:24 PM, Arend van Spriel wrote:
> On 07/18/2013 01:18 PM, Roger Quadros wrote:
>> Hi Arend,
>>
>> On 07/18/2013 11:41 AM, Arend van Spriel wrote:
>>> Hi Tony,
>>>
>>>
>>> We are using the panda board (es variant) for testing our SDIO based chips. For this we have an adapter card connection to expansion connector A. As this adapter is not publicly available we had internally patched board-omap4panda.c. Also we follow the -rc releases and use TFTP to boot the kernel image which requires USB.
>>>
>>> Moving to 3.11-rc1 I found that the mentioned board file was removed by your commit:
>>>
>>> commit b42b918194c4791510ac049e3d507169a7de8544
>>> Author: Tony Lindgren <tony@atomide.com>
>>> Date: Thu May 30 12:53:05 2013 -0700
>>>
>>> ARM: OMAP2+: Remove board-omap4panda.c
>>>
>>> As our patches on that file are internal I do not hold it against you. This is no regression and we need to fix it.
>>>
>>> So my first step was to follow the recipe given in that commit. Beside that I noticed a thread about USB issue on LKML so I also applied the following commit:
>>>
>>> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
>>> Author: Roger Quadros <rogerq@ti.com>
>>> Date: Tue Jun 18 19:04:47 2013 +0300
>>>
>>> ARM: OMAP2+: Provide alias to USB PHY clock
>>>
>>> The attached kernel log seems to suggest that the device tree is picked up by the kernel, but the USB does not seem very active. No ethernet connectivity. This does seem a regression to me. Is there some other patch that I need to get it going again?
>>>
>>
>> I tried with your config and 3.11-rc1 kernel with the above commit on top and ethernet seems to
>> work for me. My boot log is attached.
>>
>> Are you sure that you are building the DTB for panda-es and the bootloader is picking up the right file and
>> not an outdated one?
>
> I appended the DTB to the kernel image thus avoiding the need to update u-boot (at least that is what I understood from Tony's commit).
>
I understand this can be a little tedious at first.
This is my u-boot boot.txt
fatload mmc 0:1 0x825f0000 omap4-panda-es.dtb
fatload mmc 0:1 0x80300000 uImage
set fdt_high 0xffffffff
setenv bootargs console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 rootwait
bootm 0x80300000 - 0x825f0000
You need to generate boot.scr from the above boot.txt and place it in SD card boot partition.
mkimage -A arm -T script -C none -n "Boot Image" -d boot.txt boot.scr
And of course copy the omap4-panda-es.dtb to SD card boot partition.
hope this helps.
>> Why is the version of SPL loader and u-boot different in your log?
>> You need to use the MLO file generated by the u-boot build along with the uImage.
>>
>> Just to be sure we are on the same setup could you please try with latest u-boot release (2013-04). Thanks.
>
> I recall having difficulty with TFTP boot using a 2013 u-boot release, but that hurdle is for later. I will try.
>
OK. We can figure this out as well.
cheers,
-roger
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 11:30 ` Roger Quadros
@ 2013-07-18 12:38 ` Arend van Spriel
2013-07-18 12:42 ` Roger Quadros
0 siblings, 1 reply; 32+ messages in thread
From: Arend van Spriel @ 2013-07-18 12:38 UTC (permalink / raw)
To: Roger Quadros; +Cc: tony, linux-omap, linux-kernel
On 07/18/2013 01:30 PM, Roger Quadros wrote:
> On 07/18/2013 02:24 PM, Arend van Spriel wrote:
>> On 07/18/2013 01:18 PM, Roger Quadros wrote:
>>> Hi Arend,
>>>
>>> On 07/18/2013 11:41 AM, Arend van Spriel wrote:
>>>> Hi Tony,
>>>>
>>>>
>>>> We are using the panda board (es variant) for testing our SDIO based chips. For this we have an adapter card connection to expansion connector A. As this adapter is not publicly available we had internally patched board-omap4panda.c. Also we follow the -rc releases and use TFTP to boot the kernel image which requires USB.
>>>>
>>>> Moving to 3.11-rc1 I found that the mentioned board file was removed by your commit:
>>>>
>>>> commit b42b918194c4791510ac049e3d507169a7de8544
>>>> Author: Tony Lindgren <tony@atomide.com>
>>>> Date: Thu May 30 12:53:05 2013 -0700
>>>>
>>>> ARM: OMAP2+: Remove board-omap4panda.c
>>>>
>>>> As our patches on that file are internal I do not hold it against you. This is no regression and we need to fix it.
>>>>
>>>> So my first step was to follow the recipe given in that commit. Beside that I noticed a thread about USB issue on LKML so I also applied the following commit:
>>>>
>>>> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
>>>> Author: Roger Quadros <rogerq@ti.com>
>>>> Date: Tue Jun 18 19:04:47 2013 +0300
>>>>
>>>> ARM: OMAP2+: Provide alias to USB PHY clock
>>>>
>>>> The attached kernel log seems to suggest that the device tree is picked up by the kernel, but the USB does not seem very active. No ethernet connectivity. This does seem a regression to me. Is there some other patch that I need to get it going again?
>>>>
>>>
>>> I tried with your config and 3.11-rc1 kernel with the above commit on top and ethernet seems to
>>> work for me. My boot log is attached.
>>>
>>> Are you sure that you are building the DTB for panda-es and the bootloader is picking up the right file and
>>> not an outdated one?
>>
>> I appended the DTB to the kernel image thus avoiding the need to update u-boot (at least that is what I understood from Tony's commit).
>>
>
> I understand this can be a little tedious at first.
>
> This is my u-boot boot.txt
>
> fatload mmc 0:1 0x825f0000 omap4-panda-es.dtb
> fatload mmc 0:1 0x80300000 uImage
> set fdt_high 0xffffffff
> setenv bootargs console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 rootwait
> bootm 0x80300000 - 0x825f0000
>
> You need to generate boot.scr from the above boot.txt and place it in SD card boot partition.
>
> mkimage -A arm -T script -C none -n "Boot Image" -d boot.txt boot.scr
>
> And of course copy the omap4-panda-es.dtb to SD card boot partition.
>
> hope this helps.
Thanks for sharing this.
>>> Why is the version of SPL loader and u-boot different in your log?
>>> You need to use the MLO file generated by the u-boot build along with the uImage.
>>>
>>> Just to be sure we are on the same setup could you please try with latest u-boot release (2013-04). Thanks.
>>
>> I recall having difficulty with TFTP boot using a 2013 u-boot release, but that hurdle is for later. I will try.
>>
>
> OK. We can figure this out as well.
I tried with same SPL and u-boot version, but that did not work out. So
I moved to v2013.04 and the log looks better. I was especially
interested in this:
[ 2.807434] usb 1-1.1: new high-speed USB device number 3 using
ehci-omap
[ 2.932495] usb 1-1.1: New USB device found, idVendor=0424,
idProduct=ec00
[ 2.932495] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumbe0
[ 2.958770] smsc95xx v1.0.4
Starting logging: OK
Initializing random number generator... [ 3.045806] smsc95xx
1-1.1:1.0 eth0
Regards,
Arend
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 12:38 ` Arend van Spriel
@ 2013-07-18 12:42 ` Roger Quadros
2013-07-25 13:06 ` Arend van Spriel
0 siblings, 1 reply; 32+ messages in thread
From: Roger Quadros @ 2013-07-18 12:42 UTC (permalink / raw)
To: Arend van Spriel; +Cc: tony, linux-omap, linux-kernel
On 07/18/2013 03:38 PM, Arend van Spriel wrote:
> On 07/18/2013 01:30 PM, Roger Quadros wrote:
>> On 07/18/2013 02:24 PM, Arend van Spriel wrote:
>>> On 07/18/2013 01:18 PM, Roger Quadros wrote:
>>>> Hi Arend,
>>>>
>>>> On 07/18/2013 11:41 AM, Arend van Spriel wrote:
>>>>> Hi Tony,
>>>>>
>>>>>
>>>>> We are using the panda board (es variant) for testing our SDIO based chips. For this we have an adapter card connection to expansion connector A. As this adapter is not publicly available we had internally patched board-omap4panda.c. Also we follow the -rc releases and use TFTP to boot the kernel image which requires USB.
>>>>>
>>>>> Moving to 3.11-rc1 I found that the mentioned board file was removed by your commit:
>>>>>
>>>>> commit b42b918194c4791510ac049e3d507169a7de8544
>>>>> Author: Tony Lindgren <tony@atomide.com>
>>>>> Date: Thu May 30 12:53:05 2013 -0700
>>>>>
>>>>> ARM: OMAP2+: Remove board-omap4panda.c
>>>>>
>>>>> As our patches on that file are internal I do not hold it against you. This is no regression and we need to fix it.
>>>>>
>>>>> So my first step was to follow the recipe given in that commit. Beside that I noticed a thread about USB issue on LKML so I also applied the following commit:
>>>>>
>>>>> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
>>>>> Author: Roger Quadros <rogerq@ti.com>
>>>>> Date: Tue Jun 18 19:04:47 2013 +0300
>>>>>
>>>>> ARM: OMAP2+: Provide alias to USB PHY clock
>>>>>
>>>>> The attached kernel log seems to suggest that the device tree is picked up by the kernel, but the USB does not seem very active. No ethernet connectivity. This does seem a regression to me. Is there some other patch that I need to get it going again?
>>>>>
>>>>
>>>> I tried with your config and 3.11-rc1 kernel with the above commit on top and ethernet seems to
>>>> work for me. My boot log is attached.
>>>>
>>>> Are you sure that you are building the DTB for panda-es and the bootloader is picking up the right file and
>>>> not an outdated one?
>>>
>>> I appended the DTB to the kernel image thus avoiding the need to update u-boot (at least that is what I understood from Tony's commit).
>>>
>>
>> I understand this can be a little tedious at first.
>>
>> This is my u-boot boot.txt
>>
>> fatload mmc 0:1 0x825f0000 omap4-panda-es.dtb
>> fatload mmc 0:1 0x80300000 uImage
>> set fdt_high 0xffffffff
>> setenv bootargs console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 rootwait
>> bootm 0x80300000 - 0x825f0000
>>
>> You need to generate boot.scr from the above boot.txt and place it in SD card boot partition.
>>
>> mkimage -A arm -T script -C none -n "Boot Image" -d boot.txt boot.scr
>>
>> And of course copy the omap4-panda-es.dtb to SD card boot partition.
>>
>> hope this helps.
>
> Thanks for sharing this.
>
>>>> Why is the version of SPL loader and u-boot different in your log?
>>>> You need to use the MLO file generated by the u-boot build along with the uImage.
>>>>
>>>> Just to be sure we are on the same setup could you please try with latest u-boot release (2013-04). Thanks.
>>>
>>> I recall having difficulty with TFTP boot using a 2013 u-boot release, but that hurdle is for later. I will try.
>>>
>>
>> OK. We can figure this out as well.
>
> I tried with same SPL and u-boot version, but that did not work out. So I moved to v2013.04 and the log looks better. I was especially interested in this:
>
> [ 2.807434] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
> [ 2.932495] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
> [ 2.932495] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumbe0
> [ 2.958770] smsc95xx v1.0.4
> Starting logging: OK
> Initializing random number generator... [ 3.045806] smsc95xx 1-1.1:1.0 eth0
Cool! :).
FYI. I also tested tftpboot from u-boot and NFS root file system and it works fine.
cheers,
-roger
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 8:59 ` Tony Lindgren
2013-07-18 10:18 ` Arend van Spriel
@ 2013-07-19 10:36 ` Arend van Spriel
2013-07-19 10:49 ` Roger Quadros
2013-07-19 10:53 ` Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet Tony Lindgren
2013-07-20 7:38 ` Luciano Coelho
2 siblings, 2 replies; 32+ messages in thread
From: Arend van Spriel @ 2013-07-19 10:36 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, linux-kernel, Roger Quadros
On 07/18/2013 10:59 AM, Tony Lindgren wrote:
> Then for the SDIO with device tree, take a look at the following
> patches:
>
> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
I have been looking at the pandaboard patch in the series above and I do
have a question. Among other things the patch adds these dt entries.
+ 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP | MODE0 */
+ 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP | MODE0 */
If I look at the similar names in the deceased board-omap4panda.c:
board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
OMAP_PIN_INPUT_PULLUP),
board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
OMAP_PIN_INPUT_PULLUP),
and in mux44xx.h:
mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
probably an explanation to it and it would help my understanding to know
where this difference comes from. Hope you can help me out here.
Below are the definitions that I need to move into a dts.
Regards,
Arend
/* MMC2 Mux for extension board */
/* MMC2 CMD */
OMAP4_MUX(GPMC_NWE, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
/* MMC2 CLK */
OMAP4_MUX(GPMC_NOE, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
/* MMC2 DAT 0-7 */
OMAP4_MUX(GPMC_AD0, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
OMAP4_MUX(GPMC_AD1, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
OMAP4_MUX(GPMC_AD2, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
OMAP4_MUX(GPMC_AD3, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-19 10:36 ` Arend van Spriel
@ 2013-07-19 10:49 ` Roger Quadros
2013-07-19 10:57 ` Arend van Spriel
2013-07-19 10:53 ` Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet Tony Lindgren
1 sibling, 1 reply; 32+ messages in thread
From: Roger Quadros @ 2013-07-19 10:49 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Tony Lindgren, linux-omap, linux-kernel
On 07/19/2013 01:36 PM, Arend van Spriel wrote:
> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
>> Then for the SDIO with device tree, take a look at the following
>> patches:
>>
>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>
> I have been looking at the pandaboard patch in the series above and I do have a question. Among other things the patch adds these dt entries.
>
> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP | MODE0 */
> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP | MODE0 */
>
> If I look at the similar names in the deceased board-omap4panda.c:
>
> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
>
> and in mux44xx.h:
>
> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
>
> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is probably an explanation to it and it would help my understanding to know where this difference comes from. Hope you can help me out here.
>
If you see omap4.dtsi, omap4_pmx_core starts at register address 0x4a100040.
So, you need to subtract 0x40 from the offsets defined in mux44xx.h for pmx_core registers.
NOTE: omap4_pmx_wkup starts at a different address. Those are for wakeup domain
control registers.
cheers,
-roger
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-19 10:36 ` Arend van Spriel
2013-07-19 10:49 ` Roger Quadros
@ 2013-07-19 10:53 ` Tony Lindgren
1 sibling, 0 replies; 32+ messages in thread
From: Tony Lindgren @ 2013-07-19 10:53 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-omap, linux-kernel, Roger Quadros
* Arend van Spriel <arend@broadcom.com> [130719 03:43]:
> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
> >Then for the SDIO with device tree, take a look at the following
> >patches:
> >
> >[PATCH 0/3] WLAN support for omap4 when booted with devicetree
> >http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>
> I have been looking at the pandaboard patch in the series above and
> I do have a question. Among other things the patch adds these dt
> entries.
>
> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP | MODE0 */
> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP | MODE0 */
>
> If I look at the similar names in the deceased board-omap4panda.c:
>
> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
> OMAP_PIN_INPUT_PULLUP),
> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
> OMAP_PIN_INPUT_PULLUP),
>
> and in mux44xx.h:
>
> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
>
> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
> probably an explanation to it and it would help my understanding to
> know where this difference comes from. Hope you can help me out
> here.
That's pretty confusing I agree.. The reason is that we have multiple
instances of the pinctrl-single: one for core domain and one for wkup
domain. Those instances cover the padconf registers. Then further
instances of pinctrl-single,bits will be used for the various other
SCM registers.
Felipe suggested adding a macro like OMAP4_PAD(offset, value) to
make it less confusing, but for omap4 core padconf area the difference
is 0x40, and 0x30 for omap3 if I remember correctly.
> Below are the definitions that I need to move into a dts.
>
> /* MMC2 Mux for extension board */
> /* MMC2 CMD */
> OMAP4_MUX(GPMC_NWE, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
> /* MMC2 CLK */
> OMAP4_MUX(GPMC_NOE, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
> /* MMC2 DAT 0-7 */
> OMAP4_MUX(GPMC_AD0, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
> OMAP4_MUX(GPMC_AD1, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
> OMAP4_MUX(GPMC_AD2, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
> OMAP4_MUX(GPMC_AD3, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
Assuming these are all in the core padconf area, just take the TRM
register offset and subtract 0x40.
Regards,
Tony
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-19 10:49 ` Roger Quadros
@ 2013-07-19 10:57 ` Arend van Spriel
2013-10-01 8:05 ` using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet] Arend van Spriel
0 siblings, 1 reply; 32+ messages in thread
From: Arend van Spriel @ 2013-07-19 10:57 UTC (permalink / raw)
To: Roger Quadros; +Cc: Tony Lindgren, linux-omap, linux-kernel
On 07/19/2013 12:49 PM, Roger Quadros wrote:
> On 07/19/2013 01:36 PM, Arend van Spriel wrote:
>> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
>>> Then for the SDIO with device tree, take a look at the following
>>> patches:
>>>
>>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>>
>> I have been looking at the pandaboard patch in the series above and I do have a question. Among other things the patch adds these dt entries.
>>
>> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP | MODE0 */
>> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP | MODE0 */
>>
>> If I look at the similar names in the deceased board-omap4panda.c:
>>
>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
>>
>> and in mux44xx.h:
>>
>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
>>
>> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is probably an explanation to it and it would help my understanding to know where this difference comes from. Hope you can help me out here.
>>
>
> If you see omap4.dtsi, omap4_pmx_core starts at register address 0x4a100040.
>
> So, you need to subtract 0x40 from the offsets defined in mux44xx.h for pmx_core registers.
That was what I was looking for. Thanks!
> NOTE: omap4_pmx_wkup starts at a different address. Those are for wakeup domain
> control registers.
Will keep that in mind.
Regards,
Arend
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 8:59 ` Tony Lindgren
2013-07-18 10:18 ` Arend van Spriel
2013-07-19 10:36 ` Arend van Spriel
@ 2013-07-20 7:38 ` Luciano Coelho
2 siblings, 0 replies; 32+ messages in thread
From: Luciano Coelho @ 2013-07-20 7:38 UTC (permalink / raw)
To: Tony Lindgren; +Cc: Arend van Spriel, linux-omap, linux-kernel, Roger Quadros
On Thu, 2013-07-18 at 01:59 -0700, Tony Lindgren wrote:
> * Arend van Spriel <arend@broadcom.com> [130718 01:47]:
> Then for the SDIO with device tree, take a look at the following
> patches:
>
> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>
> The wl12xx .dts changes for pandaboard are still missing too.
Just for the record, I already have the DTS patches for wl12xx on Panda
(and a few other boards).
I held them back because I wanted the bindings to be properly defined
first. I'll continue this work pretty soon, when I come back from my
summer vacations (in a week).
--
Cheers,
Luca.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-18 12:42 ` Roger Quadros
@ 2013-07-25 13:06 ` Arend van Spriel
2013-07-26 2:49 ` Joel Fernandes
0 siblings, 1 reply; 32+ messages in thread
From: Arend van Spriel @ 2013-07-25 13:06 UTC (permalink / raw)
To: Roger Quadros; +Cc: tony, linux-omap, linux-kernel
On 07/18/2013 02:42 PM, Roger Quadros wrote:
> On 07/18/2013 03:38 PM, Arend van Spriel wrote:
>> On 07/18/2013 01:30 PM, Roger Quadros wrote:
>>> On 07/18/2013 02:24 PM, Arend van Spriel wrote:
>>>> On 07/18/2013 01:18 PM, Roger Quadros wrote:
>>>>> Hi Arend,
>>>>>
>>>>> On 07/18/2013 11:41 AM, Arend van Spriel wrote:
>>>>>> Hi Tony,
>>>>>>
>>>>>>
>>>>>> We are using the panda board (es variant) for testing our SDIO based chips. For this we have an adapter card connection to expansion connector A. As this adapter is not publicly available we had internally patched board-omap4panda.c. Also we follow the -rc releases and use TFTP to boot the kernel image which requires USB.
>>>>>>
>>>>>> Moving to 3.11-rc1 I found that the mentioned board file was removed by your commit:
>>>>>>
>>>>>> commit b42b918194c4791510ac049e3d507169a7de8544
>>>>>> Author: Tony Lindgren <tony@atomide.com>
>>>>>> Date: Thu May 30 12:53:05 2013 -0700
>>>>>>
>>>>>> ARM: OMAP2+: Remove board-omap4panda.c
>>>>>>
>>>>>> As our patches on that file are internal I do not hold it against you. This is no regression and we need to fix it.
>>>>>>
>>>>>> So my first step was to follow the recipe given in that commit. Beside that I noticed a thread about USB issue on LKML so I also applied the following commit:
>>>>>>
>>>>>> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
>>>>>> Author: Roger Quadros <rogerq@ti.com>
>>>>>> Date: Tue Jun 18 19:04:47 2013 +0300
>>>>>>
>>>>>> ARM: OMAP2+: Provide alias to USB PHY clock
>>>>>>
>>>>>> The attached kernel log seems to suggest that the device tree is picked up by the kernel, but the USB does not seem very active. No ethernet connectivity. This does seem a regression to me. Is there some other patch that I need to get it going again?
>>>>>>
>>>>>
>>>>> I tried with your config and 3.11-rc1 kernel with the above commit on top and ethernet seems to
>>>>> work for me. My boot log is attached.
>>>>>
>>>>> Are you sure that you are building the DTB for panda-es and the bootloader is picking up the right file and
>>>>> not an outdated one?
>>>>
>>>> I appended the DTB to the kernel image thus avoiding the need to update u-boot (at least that is what I understood from Tony's commit).
>>>>
>>>
>>> I understand this can be a little tedious at first.
>>>
>>> This is my u-boot boot.txt
>>>
>>> fatload mmc 0:1 0x825f0000 omap4-panda-es.dtb
>>> fatload mmc 0:1 0x80300000 uImage
>>> set fdt_high 0xffffffff
>>> setenv bootargs console=ttyO2,115200n8 mem=1G@0x80000000 root=/dev/mmcblk0p2 rootwait
>>> bootm 0x80300000 - 0x825f0000
>>>
>>> You need to generate boot.scr from the above boot.txt and place it in SD card boot partition.
>>>
>>> mkimage -A arm -T script -C none -n "Boot Image" -d boot.txt boot.scr
>>>
>>> And of course copy the omap4-panda-es.dtb to SD card boot partition.
>>>
>>> hope this helps.
>>
>> Thanks for sharing this.
>>
>>>>> Why is the version of SPL loader and u-boot different in your log?
>>>>> You need to use the MLO file generated by the u-boot build along with the uImage.
>>>>>
>>>>> Just to be sure we are on the same setup could you please try with latest u-boot release (2013-04). Thanks.
>>>>
>>>> I recall having difficulty with TFTP boot using a 2013 u-boot release, but that hurdle is for later. I will try.
>>>>
>>>
>>> OK. We can figure this out as well.
>>
>> I tried with same SPL and u-boot version, but that did not work out. So I moved to v2013.04 and the log looks better. I was especially interested in this:
>>
>> [ 2.807434] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
>> [ 2.932495] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
>> [ 2.932495] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumbe0
>> [ 2.958770] smsc95xx v1.0.4
>> Starting logging: OK
>> Initializing random number generator... [ 3.045806] smsc95xx 1-1.1:1.0 eth0
>
> Cool! :).
>
> FYI. I also tested tftpboot from u-boot and NFS root file system and it works fine.
Hi Roger,
Can I get back on this topic. When USB and ethernet was working for me
as stated above, I was not doing tftpboot. When I use tftpboot the
images are obtained from the tftp server, but after kernel has started
there is nothing in /sys/bus/usb/devices/.
I tried a 'usb stop' before booting the kernel, but that does not help
either. As you stated to have tftpboot working, maybe you can help me.
Regards,
Arend
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-25 13:06 ` Arend van Spriel
@ 2013-07-26 2:49 ` Joel Fernandes
2013-07-26 3:00 ` Joel Fernandes
0 siblings, 1 reply; 32+ messages in thread
From: Joel Fernandes @ 2013-07-26 2:49 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Roger Quadros, tony, linux-omap, linux-kernel
Hi Arend,
On 07/25/2013 08:06 AM, Arend van Spriel wrote:
> On 07/18/2013 02:42 PM, Roger Quadros wrote:
>> On 07/18/2013 03:38 PM, Arend van Spriel wrote:
>>> On 07/18/2013 01:30 PM, Roger Quadros wrote:
>>>> On 07/18/2013 02:24 PM, Arend van Spriel wrote:
>>>>> On 07/18/2013 01:18 PM, Roger Quadros wrote:
>>>>>> Hi Arend,
>>>>>>
>>>>>> On 07/18/2013 11:41 AM, Arend van Spriel wrote:
>>>>>>> Hi Tony,
>>>>>>>
>>>>>>>
>>>>>>> We are using the panda board (es variant) for testing our SDIO
>>>>>>> based chips. For this we have an adapter card connection to
>>>>>>> expansion connector A. As this adapter is not publicly available
>>>>>>> we had internally patched board-omap4panda.c. Also we follow the
>>>>>>> -rc releases and use TFTP to boot the kernel image which requires
>>>>>>> USB.
>>>>>>>
>>>>>>> Moving to 3.11-rc1 I found that the mentioned board file was
>>>>>>> removed by your commit:
>>>>>>>
>>>>>>> commit b42b918194c4791510ac049e3d507169a7de8544
>>>>>>> Author: Tony Lindgren <tony@atomide.com>
>>>>>>> Date: Thu May 30 12:53:05 2013 -0700
>>>>>>>
>>>>>>> ARM: OMAP2+: Remove board-omap4panda.c
>>>>>>>
>>>>>>> As our patches on that file are internal I do not hold it against
>>>>>>> you. This is no regression and we need to fix it.
>>>>>>>
>>>>>>> So my first step was to follow the recipe given in that commit.
>>>>>>> Beside that I noticed a thread about USB issue on LKML so I also
>>>>>>> applied the following commit:
>>>>>>>
>>>>>>> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
>>>>>>> Author: Roger Quadros <rogerq@ti.com>
>>>>>>> Date: Tue Jun 18 19:04:47 2013 +0300
>>>>>>>
>>>>>>> ARM: OMAP2+: Provide alias to USB PHY clock
>>>>>>>
>>>>>>> The attached kernel log seems to suggest that the device tree is
>>>>>>> picked up by the kernel, but the USB does not seem very active.
>>>>>>> No ethernet connectivity. This does seem a regression to me. Is
>>>>>>> there some other patch that I need to get it going again?
>>>>>>>
>>>>>>
>>>>>> I tried with your config and 3.11-rc1 kernel with the above commit
>>>>>> on top and ethernet seems to
>>>>>> work for me. My boot log is attached.
>>>>>>
>>>>>> Are you sure that you are building the DTB for panda-es and the
>>>>>> bootloader is picking up the right file and
>>>>>> not an outdated one?
>>>>>
>>>>> I appended the DTB to the kernel image thus avoiding the need to
>>>>> update u-boot (at least that is what I understood from Tony's commit).
>>>>>
>>>>
>>>> I understand this can be a little tedious at first.
>>>>
>>>> This is my u-boot boot.txt
>>>>
>>>> fatload mmc 0:1 0x825f0000 omap4-panda-es.dtb
>>>> fatload mmc 0:1 0x80300000 uImage
>>>> set fdt_high 0xffffffff
>>>> setenv bootargs console=ttyO2,115200n8 mem=1G@0x80000000
>>>> root=/dev/mmcblk0p2 rootwait
>>>> bootm 0x80300000 - 0x825f0000
>>>>
>>>> You need to generate boot.scr from the above boot.txt and place it
>>>> in SD card boot partition.
>>>>
>>>> mkimage -A arm -T script -C none -n "Boot Image" -d boot.txt boot.scr
>>>>
>>>> And of course copy the omap4-panda-es.dtb to SD card boot partition.
>>>>
>>>> hope this helps.
>>>
>>> Thanks for sharing this.
>>>
>>>>>> Why is the version of SPL loader and u-boot different in your log?
>>>>>> You need to use the MLO file generated by the u-boot build along
>>>>>> with the uImage.
>>>>>>
>>>>>> Just to be sure we are on the same setup could you please try with
>>>>>> latest u-boot release (2013-04). Thanks.
>>>>>
>>>>> I recall having difficulty with TFTP boot using a 2013 u-boot
>>>>> release, but that hurdle is for later. I will try.
>>>>>
>>>>
>>>> OK. We can figure this out as well.
>>>
>>> I tried with same SPL and u-boot version, but that did not work out.
>>> So I moved to v2013.04 and the log looks better. I was especially
>>> interested in this:
>>>
>>> [ 2.807434] usb 1-1.1: new high-speed USB device number 3 using
>>> ehci-omap
>>> [ 2.932495] usb 1-1.1: New USB device found, idVendor=0424,
>>> idProduct=ec00
>>> [ 2.932495] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
>>> SerialNumbe0
>>> [ 2.958770] smsc95xx v1.0.4
>>> Starting logging: OK
>>> Initializing random number generator... [ 3.045806] smsc95xx
>>> 1-1.1:1.0 eth0
>>
>> Cool! :).
>>
>> FYI. I also tested tftpboot from u-boot and NFS root file system and
>> it works fine.
>
> Hi Roger,
>
> Can I get back on this topic. When USB and ethernet was working for me
> as stated above, I was not doing tftpboot. When I use tftpboot the
> images are obtained from the tftp server, but after kernel has started
> there is nothing in /sys/bus/usb/devices/.
I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on omap4-panda-es
and enabled following USB options:
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_PHY=y
CONFIG_OMAP_USB2=y
CONFIG_OMAP_CONTROL_USB=y
CONFIG_USB_MUSB_OMAP2PLUS=y
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_EHCI_HCD_OMAP=y
With this I see both USB ports, and ethernet:
bash-4.2# ifconfig eth0
eth0 Link encap:Ethernet HWaddr BE:08:A9:74:3E:A0
inet addr:192.168.3.4 Bcast:192.168.3.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:842 (842.0 B) TX bytes:4724 (4.6 KiB)
bash-4.2# lsusb
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
bash-4.2# ls /sys/bus/usb/devices/
1-0:1.0 1-1 1-1.1 1-1.1:1.0 1-1:1.0 2-0:1.0 usb1
usb2
> I tried a 'usb stop' before booting the kernel, but that does not help
> either. As you stated to have tftpboot working, maybe you can help me.
I am tftp'ing kernel over USB network. I think U-boot shouldn't have
anything to do with Kernel USB though. If it does, then its a bug.
Hope this helps, Thanks,
-Joel
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-26 2:49 ` Joel Fernandes
@ 2013-07-26 3:00 ` Joel Fernandes
2013-07-26 7:25 ` Arend van Spriel
2013-07-26 10:13 ` Arend van Spriel
0 siblings, 2 replies; 32+ messages in thread
From: Joel Fernandes @ 2013-07-26 3:00 UTC (permalink / raw)
To: joelf; +Cc: Arend van Spriel, Roger Quadros, tony, linux-omap, linux-kernel
On 07/25/2013 09:49 PM, Joel Fernandes wrote:
[..]
>> Can I get back on this topic. When USB and ethernet was working for me
>> as stated above, I was not doing tftpboot. When I use tftpboot the
>> images are obtained from the tftp server, but after kernel has started
>> there is nothing in /sys/bus/usb/devices/.
>
> I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on omap4-panda-es
> and enabled following USB options:
>
> CONFIG_USB_MUSB_HDRC=y
> CONFIG_USB_PHY=y
> CONFIG_OMAP_USB2=y
> CONFIG_OMAP_CONTROL_USB=y
> CONFIG_USB_MUSB_OMAP2PLUS=y
> CONFIG_MFD_OMAP_USB_HOST=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_EHCI_HCD_OMAP=y
Sorry I missed saying I also set had to set CONFIG_NOP_USB_XCEIV=y
Thanks,
-Joel
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-26 3:00 ` Joel Fernandes
@ 2013-07-26 7:25 ` Arend van Spriel
2013-07-26 10:13 ` Arend van Spriel
1 sibling, 0 replies; 32+ messages in thread
From: Arend van Spriel @ 2013-07-26 7:25 UTC (permalink / raw)
To: Joel Fernandes; +Cc: Roger Quadros, tony, linux-omap, linux-kernel
On 07/26/2013 05:00 AM, Joel Fernandes wrote:
> On 07/25/2013 09:49 PM, Joel Fernandes wrote:
>
> [..]
>
>>> Can I get back on this topic. When USB and ethernet was working for me
>>> as stated above, I was not doing tftpboot. When I use tftpboot the
>>> images are obtained from the tftp server, but after kernel has started
>>> there is nothing in /sys/bus/usb/devices/.
>>
>> I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on omap4-panda-es
>> and enabled following USB options:
>>
>> CONFIG_USB_MUSB_HDRC=y
>> CONFIG_USB_PHY=y
>> CONFIG_OMAP_USB2=y
>> CONFIG_OMAP_CONTROL_USB=y
>> CONFIG_USB_MUSB_OMAP2PLUS=y
>> CONFIG_MFD_OMAP_USB_HOST=y
>> CONFIG_USB_EHCI_HCD=y
>> CONFIG_USB_OHCI_HCD=y
>> CONFIG_USB_EHCI_HCD_OMAP=y
>
> Sorry I missed saying I also set had to set CONFIG_NOP_USB_XCEIV=y
>
I will compare this with my .config. At first glance it looks like I am
missing some of these.
Gr. AvS
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-26 3:00 ` Joel Fernandes
2013-07-26 7:25 ` Arend van Spriel
@ 2013-07-26 10:13 ` Arend van Spriel
2013-07-26 10:15 ` Arend van Spriel
1 sibling, 1 reply; 32+ messages in thread
From: Arend van Spriel @ 2013-07-26 10:13 UTC (permalink / raw)
To: Joel Fernandes; +Cc: Roger Quadros, tony, linux-omap, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1160 bytes --]
On 07/26/2013 05:00 AM, Joel Fernandes wrote:
> On 07/25/2013 09:49 PM, Joel Fernandes wrote:
>
> [..]
>
>>> Can I get back on this topic. When USB and ethernet was working for me
>>> as stated above, I was not doing tftpboot. When I use tftpboot the
>>> images are obtained from the tftp server, but after kernel has started
>>> there is nothing in /sys/bus/usb/devices/.
>>
>> I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on omap4-panda-es
>> and enabled following USB options:
>>
>> CONFIG_USB_MUSB_HDRC=y
>> CONFIG_USB_PHY=y
>> CONFIG_OMAP_USB2=y
>> CONFIG_OMAP_CONTROL_USB=y
>> CONFIG_USB_MUSB_OMAP2PLUS=y
>> CONFIG_MFD_OMAP_USB_HOST=y
>> CONFIG_USB_EHCI_HCD=y
>> CONFIG_USB_OHCI_HCD=y
>> CONFIG_USB_EHCI_HCD_OMAP=y
>
> Sorry I missed saying I also set had to set CONFIG_NOP_USB_XCEIV=y
Here are the results of the dutch jury ;-)
[ 2.537109] HS USB OTG: no transceiver configured
[ 2.542541] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
with status -517
[ 2.542541] platform musb-hdrc.0.auto: Driver musb-hdrc requests
probe deferral
I am surely missing something here. Either in device tree or .config.
Regards,
Arend
[-- Attachment #2: panda-config --]
[-- Type: text/plain, Size: 80528 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.11.0-rc1 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_SPARSE_IRQ=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_GENERIC_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_UIDGID_CONVERTED=y
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
#
# Multiple platform selection
#
#
# CPU Core family selection
#
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MXC is not set
#
# TI OMAP Common Features
#
#
# OMAP Feature Selections
#
CONFIG_OMAP_DEBUG_DEVICES=y
CONFIG_OMAP_DEBUG_LEDS=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP2=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y
# CONFIG_SOC_AM43XX is not set
CONFIG_ARCH_OMAP2PLUS=y
#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_HAS_REALTIME_COUNTER=y
#
# OMAP Core Type
#
CONFIG_SOC_OMAP2420=y
CONFIG_SOC_OMAP2430=y
CONFIG_SOC_OMAP3430=y
CONFIG_SOC_TI81XX=y
CONFIG_OMAP_PACKAGE_ZAF=y
CONFIG_OMAP_PACKAGE_ZAC=y
CONFIG_OMAP_PACKAGE_CBB=y
CONFIG_OMAP_PACKAGE_CUS=y
CONFIG_OMAP_PACKAGE_CBP=y
#
# OMAP Board Type
#
CONFIG_MACH_OMAP2_TUSB6010=y
CONFIG_MACH_OMAP_H4=y
CONFIG_MACH_OMAP_2430SDP=y
CONFIG_MACH_OMAP3_BEAGLE=y
CONFIG_MACH_DEVKIT8000=y
CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OMAP3530_LV_SOM=y
CONFIG_MACH_OMAP3_TORPEDO=y
CONFIG_MACH_OVERO=y
CONFIG_MACH_OMAP3EVM=y
CONFIG_MACH_OMAP3517EVM=y
# CONFIG_MACH_CRANEBOARD is not set
CONFIG_MACH_OMAP3_PANDORA=y
CONFIG_MACH_TOUCHBOOK=y
CONFIG_MACH_OMAP_3430SDP=y
CONFIG_MACH_NOKIA_N800=y
CONFIG_MACH_NOKIA_N810=y
CONFIG_MACH_NOKIA_N810_WIMAX=y
CONFIG_MACH_NOKIA_N8X0=y
CONFIG_MACH_NOKIA_RM680=y
CONFIG_MACH_NOKIA_RX51=y
CONFIG_MACH_OMAP_ZOOM2=y
CONFIG_MACH_OMAP_ZOOM3=y
CONFIG_MACH_CM_T35=y
CONFIG_MACH_CM_T3517=y
CONFIG_MACH_CM_T3730=y
CONFIG_MACH_IGEP0020=y
CONFIG_MACH_IGEP0030=y
CONFIG_MACH_SBC3530=y
CONFIG_MACH_OMAP_3630SDP=y
CONFIG_MACH_TI8168EVM=y
CONFIG_MACH_TI8148EVM=y
# CONFIG_OMAP3_EMU is not set
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_ARCH_PICOXCELL is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
#
# ST-Ericsson AB U300/U335 Platform
#
#
# ST-Ericsson Mobile Platform Products
#
#
# ST-Ericsson U300/U335 Feature Selections
#
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_WM8750 is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZYNQ is not set
#
# Processor Type
#
CONFIG_CPU_V6=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v6=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y
#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_VIRT_EXT=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_CACHE_L2X0=y
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_NR_BANKS=8
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_326103 is not set
CONFIG_ARM_ERRATA_411920=y
# CONFIG_ARM_ERRATA_430973 is not set
CONFIG_PL310_ERRATA_588369=y
# CONFIG_ARM_ERRATA_643719 is not set
CONFIG_ARM_ERRATA_720789=y
CONFIG_PL310_ERRATA_727915=y
CONFIG_ARM_ERRATA_754322=y
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_364296 is not set
# CONFIG_ARM_ERRATA_764369 is not set
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_ERRATA_798181=y
CONFIG_TI_PRIV_EDMA=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not set
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_TWD=y
# CONFIG_MCPM is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
# CONFIG_ARM_PSCI is not set
CONFIG_LOCAL_TIMERS=y
CONFIG_ARCH_NR_GPIO=512
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_ZBUD is not set
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
#
# CPU Power Management
#
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_HAS_OPP=y
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NET_LL_RX_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_LEDS is not set
# CONFIG_CAN_AT91 is not set
# CONFIG_CAN_TI_HECC is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_FLEXCAN is not set
# CONFIG_CAN_GRCAN is not set
# CONFIG_CAN_SJA1000 is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
# CONFIG_CAN_CC770 is not set
#
# CAN USB interfaces
#
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_SOFTING is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=m
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7
#
# Bus devices
#
# CONFIG_OMAP_OCP2SCP is not set
CONFIG_OMAP_INTERCONNECT=y
# CONFIG_ARM_CCI is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
# CONFIG_MTD_NAND_OMAP_BCH is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_ARC=y
# CONFIG_ARC_EMAC is not set
CONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0 is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_AX88796 is not set
# CONFIG_ETHOC is not set
# CONFIG_SH_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=y
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
# CONFIG_SMSC911X_ARCH_HOOKS is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_DAVINCI_EMAC is not set
CONFIG_TI_DAVINCI_MDIO=y
CONFIG_TI_DAVINCI_CPDMA=y
CONFIG_TI_CPSW=y
# CONFIG_TI_CPTS is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=y
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_CDC_NCM=y
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_ATH_CARDS is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_SPI is not set
CONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_MESH is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTLWIFI is not set
# CONFIG_WL_TI is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
# CONFIG_CW1200 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_ATMEL is not set
CONFIG_HW_RANDOM_OMAP=y
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_GRGPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_TPS65910 is not set
#
# USB GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_HDQ_MASTER_OMAP is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
CONFIG_TWL4030_POWER=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MENELAUS=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_VEXPRESS_CONFIG is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_TEGRA_HOST1X is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_OMAP2_VRFB=y
CONFIG_OMAP2_DSS=m
# CONFIG_OMAP2_DSS_DEBUG is not set
# CONFIG_OMAP2_DSS_DEBUGFS is not set
CONFIG_OMAP2_DSS_DPI=y
CONFIG_OMAP2_DSS_RFBI=y
CONFIG_OMAP2_DSS_VENC=y
CONFIG_OMAP4_DSS_HDMI=y
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
CONFIG_FB_OMAP2=m
CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
CONFIG_FB_OMAP2_NUM_FBS=3
#
# OMAP2/3 Display Device Drivers (old device model)
#
CONFIG_PANEL_GENERIC_DPI=m
CONFIG_PANEL_TFP410=m
# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set
CONFIG_PANEL_SHARP_LS037V7DW01=m
CONFIG_PANEL_NEC_NL8048HL11_01B=m
# CONFIG_PANEL_PICODLP is not set
CONFIG_PANEL_TAAL=m
CONFIG_PANEL_TPO_TD043MTEA1=m
CONFIG_PANEL_ACX565AKM=m
# CONFIG_PANEL_N8X0 is not set
#
# OMAP Display Device Drivers (new device model)
#
# CONFIG_DISPLAY_ENCODER_TFP410 is not set
# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
# CONFIG_DISPLAY_CONNECTOR_DVI is not set
# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
# CONFIG_DISPLAY_PANEL_DPI is not set
# CONFIG_DISPLAY_PANEL_DSI_CM is not set
# CONFIG_DISPLAY_PANEL_SONY_ACX565AKM is not set
# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
# CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_TPS65217 is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_FB_SSD1307 is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_ARM=y
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_DMAENGINE_PCM=y
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_DMIC=m
CONFIG_SND_OMAP_SOC_MCBSP=m
CONFIG_SND_OMAP_SOC_MCPDM=m
# CONFIG_SND_OMAP_SOC_N810 is not set
# CONFIG_SND_OMAP_SOC_RX51 is not set
# CONFIG_SND_OMAP_SOC_AM3517EVM is not set
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
# CONFIG_SND_OMAP_SOC_OMAP_HDMI is not set
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_TWL4030=m
CONFIG_SND_SOC_TWL6040=m
# CONFIG_SND_SIMPLE_CARD is not set
# CONFIG_SOUND_PRIME is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_GADGET is not set
# CONFIG_USB_MUSB_DUAL_ROLE is not set
# CONFIG_USB_MUSB_TUSB6010 is not set
CONFIG_USB_MUSB_OMAP2PLUS=y
# CONFIG_USB_MUSB_AM35X is not set
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_MUSB_UX500 is not set
CONFIG_USB_INVENTRA_DMA=y
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_RENESAS_USBHS is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_CONTROL_USB=y
CONFIG_OMAP_USB2=y
# CONFIG_OMAP_USB3 is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_TWL4030_USB is not set
# CONFIG_TWL6030_USB is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_ULPI is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_SS_LB=m
# CONFIG_USB_CONFIGFS is not set
CONFIG_USB_ZERO=m
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_RENESAS_TPU is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL92330=y
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_OMAP=y
# CONFIG_RTC_DRV_SNVS is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_DEBUG is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_CLK_TWL6040 is not set
#
# Hardware Spinlock drivers
#
# CONFIG_HWSPINLOCK_OMAP is not set
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
CONFIG_ARM_ARCH_TIMER=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
# CONFIG_OMAP_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_ARM_KPROBES_TEST is not set
# CONFIG_PID_IN_CONTEXTIDR is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_ARM is not set
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_ARM is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_OMAP_SHAM is not set
# CONFIG_CRYPTO_DEV_OMAP_AES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_VIRTUALIZATION is not set
[-- Attachment #3: panda.log --]
[-- Type: text/plain, Size: 15310 bytes --]
kernel loaded using TFTP
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.11.0-rc1-wl-25325-g352f5
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4472904 Bytes = 4.3 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 825f0000
Booting using the fdt blob at 0x825f0000
LOK
OK
Using Device Tree in place at 825f0000, end 825f78cf
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.11.0-rc1-wl-25325-g352f573-dirty (arend@arend-ubuntu-1) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #6 SMP Fri Jul 26 11:17:18 CEST 2013
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard
[ 0.000000] cma: CMA: reserved 16 MiB at ae800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1601000 s14208 r8192 d14464 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1007708K/1047552K available (5725K kernel code, 613K rwdata, 1952K rodata, 381K init, 5522K bss, 39844K reserved, 269312K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0787988 (7679 kB)
[ 0.000000] .init : 0xc0788000 - 0xc07e7780 ( 382 kB)
[ 0.000000] .data : 0xc07e8000 - 0xc0881780 ( 614 kB)
[ 0.000000] .bss : 0xc0881780 - 0xc0de62a8 (5523 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] smp_twd: clock not found -2
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.002014] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.079589] pid_max: default: 32768 minimum: 301
[ 0.080291] Security Framework initialized
[ 0.080505] Mount-cache hash table entries: 512
[ 0.097717] CPU: Testing write buffer coherency: ok
[ 0.099914] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.099945] Calibrating local timer... 299.05MHz.
[ 0.159698] Setting up static identity map for 0xc0571ea0 - 0xc0571f10
[ 0.159851] L310 cache controller enabled
[ 0.159851] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[ 0.165466] CPU1: Booted secondary processor
[ 0.199493] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.200134] Brought up 2 CPUs
[ 0.200164] SMP: Total of 2 processors activated (2382.23 BogoMIPS).
[ 0.200164] CPU: All CPU(s) started in SVC mode.
[ 0.203033] devtmpfs: initialized
[ 0.285491] pinctrl core: initialized pinctrl subsystem
[ 0.289337] regulator-dummy: no parameters
[ 0.292999] NET: Registered protocol family 16
[ 0.301879] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.396423] OMAP GPIO hardware version 0.1
[ 0.410949] omap-gpmc 50000000.gpmc: error: clk_get
[ 0.411010] omap-gpmc: probe of 50000000.gpmc failed with error -2
[ 0.446166] No ATAGs?
[ 0.446197] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.446228] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.451202] OMAP DMA hardware revision 0.0
[ 0.454223] ARM PMU: not yet supported on OMAP4430 due to missing CTI driver
[ 0.503021] bio: create slab <bio-0> at 0
[ 0.506408] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.506469] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.571563] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[ 0.573883] hsusb1_reset: 3300 mV
[ 0.574920] hsusb1_vbus: 3300 mV
[ 0.581726] SCSI subsystem initialized
[ 0.583557] usbcore: registered new interface driver usbfs
[ 0.583984] usbcore: registered new interface driver hub
[ 0.584533] usbcore: registered new device driver usb
[ 0.590393] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
[ 0.590423] platform 48070000.i2c: Driver omap_i2c requests probe deferral
[ 0.590515] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
[ 0.590545] platform 48072000.i2c: Driver omap_i2c requests probe deferral
[ 0.590606] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
[ 0.590637] platform 48060000.i2c: Driver omap_i2c requests probe deferral
[ 0.590728] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
[ 0.590759] platform 48350000.i2c: Driver omap_i2c requests probe deferral
[ 0.597747] Switched to clocksource 32k_counter
[ 0.722625] NET: Registered protocol family 2
[ 0.724761] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.725158] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.728363] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.728698] TCP: reno registered
[ 0.728729] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.729187] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.730804] NET: Registered protocol family 1
[ 0.732299] RPC: Registered named UNIX socket transport module.
[ 0.732299] RPC: Registered udp transport module.
[ 0.732330] RPC: Registered tcp transport module.
[ 0.732330] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.733215] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.733947] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.940368] bounce pool size: 64 pages
[ 0.941131] VFS: Disk quotas dquot_6.5.2
[ 0.941375] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.944122] NFS: Registering the id_resolver key type
[ 0.944549] Key type id_resolver registered
[ 0.944580] Key type id_legacy registered
[ 0.944702] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.945373] msgmni has been set to 1474
[ 0.949218] io scheduler noop registered
[ 0.949249] io scheduler deadline registered
[ 0.949371] io scheduler cfq registered (default)
[ 0.951385] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 si.serial: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.966644] omap_uart 48020000.serial: did not get pins for uart2 error: -19
[ 0.967071] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 1.738708] console [ttyO2] enabled
[ 1.744110] omap_uart 4806e000.serial: did not get pins for uart3 error: -19
[ 1.752227] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 1.788146] brd: module loaded
[ 1.806854] loop: module loaded
[ 1.815979] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.835174] usbcore: registered new interface driver asix
[ 1.841308] usbcore: registered new interface driver ax88179_178a
[ 1.848175] usbcore: registered new interface driver cdc_ether
[ 1.854705] usbcore: registered new interface driver r815x
[ 1.860931] usbcore: registered new interface driver smsc95xx
[ 1.867370] usbcore: registered new interface driver net1080
[ 1.873748] usbcore: registered new interface driver cdc_subset
[ 1.880401] usbcore: registered new interface driver zaurus
[ 1.886718] usbcore: registered new interface driver cdc_ncm
[ 1.894470] usbcore: registered new interface driver cdc_wdm
[ 1.900878] usbcore: registered new interface driver usb-storage
[ 1.907684] usbcore: registered new interface driver usbtest
[ 1.914642] HS USB OTG: no transceiver configured
[ 1.919677] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
[ 1.927917] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral
[ 1.937774] mousedev: PS/2 mouse device common for all mice
[ 1.948669] i2c /dev entries driver
[ 1.952697] Driver for 1-wire Dallas network protocol.
[ 1.960083] ti-soc-thermal 4a002260.bandgap: failed to request fclock reference
[ 1.968231] ti-soc-thermal: probe of 4a002260.bandgap failed with error -2
[ 1.978790] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[ 1.988769] omap_hsmmc 4809c000.mmc: omap_hsmmc_probe: enter
[ 1.995269] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 2.003051] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 2.010833] omap_hsmmc 4809c000.mmc: _regulator_get: exit fffffdfb
[ 2.017364] omap_hsmmc 4809c000.mmc: regulator_get: fail vmmc -> -517
[ 2.024505] omap_hsmmc 4809c000.mmc: vmmc regulator missing
[ 2.030578] omap-dma-engine 4a056000.dma-controller: freeing channel for 61
[ 2.037994] omap-dma-engine 4a056000.dma-controller: freeing channel for 62
[ 2.045440] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[ 2.053009] omap_hsmmc 480b4000.mmc: omap_hsmmc_probe: enter
[ 2.059295] omap-dma-engine 4a056000.dma-controller: allocating channel for 48
[ 2.066955] omap-dma-engine 4a056000.dma-controller: allocating channel for 47
[ 2.074676] omap_hsmmc 480b4000.mmc: regulator_get: fail vmmc -> -19
[ 2.081420] omap_hsmmc 480b4000.mmc: vmmc regulator missing
[ 2.087341] omap-dma-engine 4a056000.dma-controller: freeing channel for 47
[ 2.094726] omap-dma-engine 4a056000.dma-controller: freeing channel for 48
[ 2.102264] omap_hsmmc 480d5000.mmc: omap_hsmmc_probe: enter
[ 2.108520] omap-dma-engine 4a056000.dma-controller: allocating channel for 60
[ 2.116180] omap-dma-engine 4a056000.dma-controller: allocating channel for 59
[ 2.123901] omap_hsmmc 480d5000.mmc: regulator_get: fail vmmc -> -19
[ 2.130645] omap_hsmmc 480d5000.mmc: vmmc regulator missing
[ 2.136566] omap-dma-engine 4a056000.dma-controller: freeing channel for 59
[ 2.143951] omap-dma-engine 4a056000.dma-controller: freeing channel for 60
[ 2.155822] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.163482] usbcore: registered new interface driver usbhid
[ 2.169403] usbhid: USB HID core driver
[ 2.174591] oprofile: using arm/armv7-ca9
[ 2.179595] TCP: cubic registered
[ 2.183105] Initializing XFRM netlink socket
[ 2.187774] NET: Registered protocol family 17
[ 2.192535] NET: Registered protocol family 15
[ 2.197631] Key type dns_resolver registered
[ 2.202239] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 2.211669] Power Management for TI OMAP4+ devices.
[ 2.216888] Power Management for TI OMAP4.
[ 2.221435] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[ 2.228729] ThumbEE CPU extension supported.
[ 2.241638] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz
[ 2.251739] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 2.263854] twl 0-0048: PIH (irq 39) chaining IRQs 416..436
[ 2.272827] twl_rtc rtc.11: Enabling TWL-RTC
[ 2.282501] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0
[ 2.292144] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV
[ 2.299926] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 2.307800] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 2.315521] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 2.322753] VPP: 1800 <--> 2500 mV at 1900 mV
[ 2.329956] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 2.336914] VDAC: 1800 mV
[ 2.341674] VANA: 2100 mV
[ 2.346710] VCXIO: 1800 mV
[ 2.351562] VUSB: 3300 mV
[ 2.356658] V1V8: 1800 mV
[ 2.361877] V2V1: 2100 mV
[ 2.379638] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz
[ 2.388061] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz
[ 2.397521] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz
[ 2.403472] HS USB OTG: no transceiver configured
[ 2.409027] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
[ 2.409057] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral
[ 2.409057] omap_hsmmc 4809c000.mmc: omap_hsmmc_probe: enter
[ 2.431671] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 2.437591] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 2.447937] omap_hsmmc 4809c000.mmc: regulator_get: fail vmmc_aux -> -19
[ 2.458648] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[ 2.537109] HS USB OTG: no transceiver configured
[ 2.542541] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
[ 2.542541] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral
[ 2.565185] twl_rtc rtc.11: setting system clock to 2000-01-01 11:06:06 UTC (946724766)
[ 2.577606] Waiting for root device /dev/mmcblk0p2...
[ 3.055114] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.065704] mmc0: new high speed SDHC card at address 0003
[ 3.073944] mmcblk0: mmc0:0003 SD8GB 7.41 GiB
[ 3.083404] mmcblk0: p1 p2
[ 3.089874] HS USB OTG: no transceiver configured
[ 3.089874] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
[ 3.103820] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral
[ 3.196533] kjournald starting. Commit interval 5 seconds
[ 3.202636] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 3.202636] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
[ 3.220550] devtmpfs: mounted
[ 3.224792] Freeing unused kernel memory: 380K (c0788000 - c07e7000)
[ 3.347290] EXT3-fs (mmcblk0p2): using internal journal
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-26 10:13 ` Arend van Spriel
@ 2013-07-26 10:15 ` Arend van Spriel
2013-07-26 10:23 ` Arend van Spriel
0 siblings, 1 reply; 32+ messages in thread
From: Arend van Spriel @ 2013-07-26 10:15 UTC (permalink / raw)
To: Joel Fernandes; +Cc: Roger Quadros, tony, linux-omap, linux-kernel
On 07/26/2013 12:13 PM, Arend van Spriel wrote:
> On 07/26/2013 05:00 AM, Joel Fernandes wrote:
>> On 07/25/2013 09:49 PM, Joel Fernandes wrote:
>>
>> [..]
>>
>>>> Can I get back on this topic. When USB and ethernet was working for me
>>>> as stated above, I was not doing tftpboot. When I use tftpboot the
>>>> images are obtained from the tftp server, but after kernel has started
>>>> there is nothing in /sys/bus/usb/devices/.
>>>
>>> I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on omap4-panda-es
>>> and enabled following USB options:
>>>
>>> CONFIG_USB_MUSB_HDRC=y
>>> CONFIG_USB_PHY=y
>>> CONFIG_OMAP_USB2=y
>>> CONFIG_OMAP_CONTROL_USB=y
>>> CONFIG_USB_MUSB_OMAP2PLUS=y
>>> CONFIG_MFD_OMAP_USB_HOST=y
>>> CONFIG_USB_EHCI_HCD=y
Aaargh. Missing this one. Will retry.
>>> CONFIG_USB_OHCI_HCD=y
>>> CONFIG_USB_EHCI_HCD_OMAP=y
>>
>> Sorry I missed saying I also set had to set CONFIG_NOP_USB_XCEIV=y
>
> Here are the results of the dutch jury ;-)
>
> [ 2.537109] HS USB OTG: no transceiver configured
> [ 2.542541] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
> with status -517
> [ 2.542541] platform musb-hdrc.0.auto: Driver musb-hdrc requests
> probe deferral
>
> I am surely missing something here. Either in device tree or .config.
>
> Regards,
> Arend
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-26 10:15 ` Arend van Spriel
@ 2013-07-26 10:23 ` Arend van Spriel
2013-07-26 10:37 ` Roger Quadros
0 siblings, 1 reply; 32+ messages in thread
From: Arend van Spriel @ 2013-07-26 10:23 UTC (permalink / raw)
To: Joel Fernandes; +Cc: Roger Quadros, tony, linux-omap, linux-kernel
On 07/26/2013 12:15 PM, Arend van Spriel wrote:
> On 07/26/2013 12:13 PM, Arend van Spriel wrote:
>> On 07/26/2013 05:00 AM, Joel Fernandes wrote:
>>> On 07/25/2013 09:49 PM, Joel Fernandes wrote:
>>>
>>> [..]
>>>
>>>>> Can I get back on this topic. When USB and ethernet was working for me
>>>>> as stated above, I was not doing tftpboot. When I use tftpboot the
>>>>> images are obtained from the tftp server, but after kernel has started
>>>>> there is nothing in /sys/bus/usb/devices/.
>>>>
>>>> I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on
>>>> omap4-panda-es
>>>> and enabled following USB options:
>>>>
>>>> CONFIG_USB_MUSB_HDRC=y
>>>> CONFIG_USB_PHY=y
>>>> CONFIG_OMAP_USB2=y
>>>> CONFIG_OMAP_CONTROL_USB=y
>>>> CONFIG_USB_MUSB_OMAP2PLUS=y
>>>> CONFIG_MFD_OMAP_USB_HOST=y
>>>> CONFIG_USB_EHCI_HCD=y
>
> Aaargh. Missing this one. Will retry.
Yes. That is working although it seems I don't need the MUSB stuff.
Regards,
Arend
>>>> CONFIG_USB_OHCI_HCD=y
>>>> CONFIG_USB_EHCI_HCD_OMAP=y
>>>
>>> Sorry I missed saying I also set had to set CONFIG_NOP_USB_XCEIV=y
>>
>> Here are the results of the dutch jury ;-)
>>
>> [ 2.537109] HS USB OTG: no transceiver configured
>> [ 2.542541] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
>> with status -517
>> [ 2.542541] platform musb-hdrc.0.auto: Driver musb-hdrc requests
>> probe deferral
>>
>> I am surely missing something here. Either in device tree or .config.
>>
>> Regards,
>> Arend
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-26 10:23 ` Arend van Spriel
@ 2013-07-26 10:37 ` Roger Quadros
2013-07-26 10:40 ` Arend van Spriel
0 siblings, 1 reply; 32+ messages in thread
From: Roger Quadros @ 2013-07-26 10:37 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Joel Fernandes, tony, linux-omap, linux-kernel
On 07/26/2013 01:23 PM, Arend van Spriel wrote:
> On 07/26/2013 12:15 PM, Arend van Spriel wrote:
>> On 07/26/2013 12:13 PM, Arend van Spriel wrote:
>>> On 07/26/2013 05:00 AM, Joel Fernandes wrote:
>>>> On 07/25/2013 09:49 PM, Joel Fernandes wrote:
>>>>
>>>> [..]
>>>>
>>>>>> Can I get back on this topic. When USB and ethernet was working for me
>>>>>> as stated above, I was not doing tftpboot. When I use tftpboot the
>>>>>> images are obtained from the tftp server, but after kernel has started
>>>>>> there is nothing in /sys/bus/usb/devices/.
>>>>>
>>>>> I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on
>>>>> omap4-panda-es
>>>>> and enabled following USB options:
>>>>>
>>>>> CONFIG_USB_MUSB_HDRC=y
>>>>> CONFIG_USB_PHY=y
>>>>> CONFIG_OMAP_USB2=y
>>>>> CONFIG_OMAP_CONTROL_USB=y
>>>>> CONFIG_USB_MUSB_OMAP2PLUS=y
>>>>> CONFIG_MFD_OMAP_USB_HOST=y
>>>>> CONFIG_USB_EHCI_HCD=y
>>
>> Aaargh. Missing this one. Will retry.
>
> Yes. That is working although it seems I don't need the MUSB stuff.
MUSB is required for the micro OTG port and not USB host ports.
cheers,
-roger
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet
2013-07-26 10:37 ` Roger Quadros
@ 2013-07-26 10:40 ` Arend van Spriel
0 siblings, 0 replies; 32+ messages in thread
From: Arend van Spriel @ 2013-07-26 10:40 UTC (permalink / raw)
To: Roger Quadros; +Cc: Joel Fernandes, tony, linux-omap, linux-kernel
On 07/26/2013 12:37 PM, Roger Quadros wrote:
> On 07/26/2013 01:23 PM, Arend van Spriel wrote:
>> On 07/26/2013 12:15 PM, Arend van Spriel wrote:
>>> On 07/26/2013 12:13 PM, Arend van Spriel wrote:
>>>> On 07/26/2013 05:00 AM, Joel Fernandes wrote:
>>>>> On 07/25/2013 09:49 PM, Joel Fernandes wrote:
>>>>>
>>>>> [..]
>>>>>
>>>>>>> Can I get back on this topic. When USB and ethernet was working for me
>>>>>>> as stated above, I was not doing tftpboot. When I use tftpboot the
>>>>>>> images are obtained from the tftp server, but after kernel has started
>>>>>>> there is nothing in /sys/bus/usb/devices/.
>>>>>>
>>>>>> I quickly tried 3.11-rc2 + Roger's USB PHY clock patch on
>>>>>> omap4-panda-es
>>>>>> and enabled following USB options:
>>>>>>
>>>>>> CONFIG_USB_MUSB_HDRC=y
>>>>>> CONFIG_USB_PHY=y
>>>>>> CONFIG_OMAP_USB2=y
>>>>>> CONFIG_OMAP_CONTROL_USB=y
>>>>>> CONFIG_USB_MUSB_OMAP2PLUS=y
>>>>>> CONFIG_MFD_OMAP_USB_HOST=y
>>>>>> CONFIG_USB_EHCI_HCD=y
>>>
>>> Aaargh. Missing this one. Will retry.
>>
>> Yes. That is working although it seems I don't need the MUSB stuff.
>
> MUSB is required for the micro OTG port and not USB host ports.
Roger that (apologies for my corny sense of humor).
> cheers,
> -roger
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-07-19 10:57 ` Arend van Spriel
@ 2013-10-01 8:05 ` Arend van Spriel
2013-10-01 9:49 ` Roger Quadros
0 siblings, 1 reply; 32+ messages in thread
From: Arend van Spriel @ 2013-10-01 8:05 UTC (permalink / raw)
To: Roger Quadros; +Cc: Tony Lindgren, linux-omap, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2321 bytes --]
On 07/19/2013 12:57 PM, Arend van Spriel wrote:
> On 07/19/2013 12:49 PM, Roger Quadros wrote:
>> On 07/19/2013 01:36 PM, Arend van Spriel wrote:
>>> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
>>>> Then for the SDIO with device tree, take a look at the following
>>>> patches:
>>>>
>>>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>>>
>>> I have been looking at the pandaboard patch in the series above and I
>>> do have a question. Among other things the patch adds these dt entries.
>>>
>>> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP |
>>> MODE0 */
>>> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP |
>>> MODE0 */
>>>
>>> If I look at the similar names in the deceased board-omap4panda.c:
>>>
>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
>>> OMAP_PIN_INPUT_PULLUP),
>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
>>> OMAP_PIN_INPUT_PULLUP),
>>>
>>> and in mux44xx.h:
>>>
>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
>>>
>>> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
>>> probably an explanation to it and it would help my understanding to
>>> know where this difference comes from. Hope you can help me out here.
>>>
>>
>> If you see omap4.dtsi, omap4_pmx_core starts at register address
>> 0x4a100040.
>>
>> So, you need to subtract 0x40 from the offsets defined in mux44xx.h
>> for pmx_core registers.
>
> That was what I was looking for. Thanks!
Hi Roger,
It has been a while, but I would like to pickup this thread. We have a
couple of pandaboards used as test setup. These have an SDIO adapter
hooked up to expansion connector A using MMC2. I have attached the patch
file (just ignore platform_data stuff). Now on one board it works, but
not for the other. I suspect a board issue so listing the two types that
we use:
PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
Any hints for me.
Regards,
Arend
>> NOTE: omap4_pmx_wkup starts at a different address. Those are for
>> wakeup domain
>> control registers.
>
> Will keep that in mind.
>
> Regards,
> Arend
>
[-- Attachment #2: 0001-brcmfmac-add-device-tree-support-for-panda-board.patch --]
[-- Type: text/plain, Size: 3422 bytes --]
>From 4a20162935b27e23ec7ddc818c9fe6b451c1a968 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Thu, 22 Aug 2013 12:29:23 +0200
Subject: [PATCH] brcmfmac: add device tree support for panda board
In linux mainline the pandaboard specific code moved to using
the device tree. Changing our internal patches to get platform
specific info from the device tree.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 20 +++++++++++++++-
arch/arm/mach-omap2/devices.c | 36 ++++++++++++++++++++++++++++-
2 files changed, 54 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index faa95b5..6ebeb8e 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -226,6 +226,22 @@
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
+ mmc2_brcmf_en: pinmux_mmc2_brcmf_en {
+ pinctrl-single,pins = <
+ 0x92 (PIN_OUTPUT | MUX_MODE3) /* brcmf-power */
+ >;
+ };
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x44 (MUX_MODE1 | PIN_INPUT_PULLUP) /* mmc2-cmd */
+ 0x42 (MUX_MODE1 | PIN_INPUT_PULLUP) /* mmc2-clk */
+ 0x00 (MUX_MODE1 | PIN_INPUT_PULLUP) /* mmc2-dat 0-3 */
+ 0x02 (MUX_MODE1 | PIN_INPUT_PULLUP)
+ 0x04 (MUX_MODE1 | PIN_INPUT_PULLUP)
+ 0x06 (MUX_MODE1 | PIN_INPUT_PULLUP)
+ 0x9a (MUX_MODE3 | PIN_INPUT_PULLDOWN) /* oob-irq */
+ >;
+ };
};
&omap4_pmx_wkup {
@@ -302,7 +318,9 @@
};
&mmc2 {
- status = "disabled";
+ vmmc-supply = <&vaux1>;
+ bus-width = <4>;
+ non-removable;
};
&mmc3 {
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 3c1279f..7a47535 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -21,7 +21,7 @@
#include <linux/platform_data/omap4-keypad.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/mailbox-omap.h>
-
+#include <linux/platform_data/brcmfmac-sdio.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -547,6 +547,39 @@ static inline void omap_init_wl12xx_of(void)
}
#endif
+#define GPIO_BRCMF_SDIO_PWR 134
+#define GPIO_BRCMF_SDIO_OOB 138
+static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata;
+
+static struct platform_device brcmf_sdio_device = {
+ .name = BRCMFMAC_SDIO_PDATA_NAME,
+ .id = PLATFORM_DEVID_NONE,
+ .dev.platform_data = &brcmfmac_sdio_pdata
+};
+
+static struct gpio brcmf_sdio_gpios[] __initdata = {
+ { GPIO_BRCMF_SDIO_PWR, GPIOF_OUT_INIT_HIGH, "brcmf_sdio_pwr"},
+ { GPIO_BRCMF_SDIO_OOB, GPIOF_IN, "brcmf_sdio_oob"},
+};
+
+void __init omap_init_brcmfmac_of(void)
+{
+ if (!of_have_populated_dt())
+ return;
+
+ if (!of_machine_is_compatible("ti,omap4-panda"))
+ return;
+
+ if (gpio_request_array(brcmf_sdio_gpios,
+ ARRAY_SIZE(brcmf_sdio_gpios))) {
+ pr_err("%s: failed to request gpio array\n", __func__);
+ return;
+ }
+
+ brcmfmac_sdio_pdata.oob_irq_supported = false;
+ platform_device_register(&brcmf_sdio_device);
+}
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -573,6 +606,7 @@ static int __init omap2_init_devices(void)
} else {
/* These can be removed when bindings are done */
omap_init_wl12xx_of();
+ omap_init_brcmfmac_of();
}
omap_init_sti();
omap_init_rng();
--
1.7.10.4
^ permalink raw reply related [flat|nested] 32+ messages in thread
* Re: using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-10-01 8:05 ` using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet] Arend van Spriel
@ 2013-10-01 9:49 ` Roger Quadros
2013-10-01 9:53 ` Roger Quadros
0 siblings, 1 reply; 32+ messages in thread
From: Roger Quadros @ 2013-10-01 9:49 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Tony Lindgren, linux-omap, linux-kernel
Hi Arend,
On 10/01/2013 11:05 AM, Arend van Spriel wrote:
> On 07/19/2013 12:57 PM, Arend van Spriel wrote:
>> On 07/19/2013 12:49 PM, Roger Quadros wrote:
>>> On 07/19/2013 01:36 PM, Arend van Spriel wrote:
>>>> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
>>>>> Then for the SDIO with device tree, take a look at the following
>>>>> patches:
>>>>>
>>>>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
>>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>>>>
>>>> I have been looking at the pandaboard patch in the series above and I
>>>> do have a question. Among other things the patch adds these dt entries.
>>>>
>>>> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP |
>>>> MODE0 */
>>>> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP |
>>>> MODE0 */
>>>>
>>>> If I look at the similar names in the deceased board-omap4panda.c:
>>>>
>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
>>>> OMAP_PIN_INPUT_PULLUP),
>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
>>>> OMAP_PIN_INPUT_PULLUP),
>>>>
>>>> and in mux44xx.h:
>>>>
>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
>>>>
>>>> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
>>>> probably an explanation to it and it would help my understanding to
>>>> know where this difference comes from. Hope you can help me out here.
>>>>
>>>
>>> If you see omap4.dtsi, omap4_pmx_core starts at register address
>>> 0x4a100040.
>>>
>>> So, you need to subtract 0x40 from the offsets defined in mux44xx.h
>>> for pmx_core registers.
>>
>> That was what I was looking for. Thanks!
>
> Hi Roger,
>
> It has been a while, but I would like to pickup this thread. We have a couple of pandaboards used as test setup. These have an SDIO adapter hooked up to expansion connector A using MMC2. I have attached the patch file (just ignore platform_data stuff). Now on one board it works, but not for the other. I suspect a board issue so listing the two types that we use:
>
> PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
> PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
>
> Any hints for me.
Does your PandaboardES have the WLAN chip (U4) mounted? If yes, how do you isolate
it from your external SDIO adapter?
Most likely your Pandaboard (A2) doesn't have the WLAN chip (U3) on board so there is no problem there.
cheers,
-roger
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-10-01 9:49 ` Roger Quadros
@ 2013-10-01 9:53 ` Roger Quadros
2013-10-01 10:53 ` Arend van Spriel
0 siblings, 1 reply; 32+ messages in thread
From: Roger Quadros @ 2013-10-01 9:53 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Tony Lindgren, linux-omap, linux-kernel
On 10/01/2013 12:49 PM, Roger Quadros wrote:
> Hi Arend,
>
> On 10/01/2013 11:05 AM, Arend van Spriel wrote:
>> On 07/19/2013 12:57 PM, Arend van Spriel wrote:
>>> On 07/19/2013 12:49 PM, Roger Quadros wrote:
>>>> On 07/19/2013 01:36 PM, Arend van Spriel wrote:
>>>>> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
>>>>>> Then for the SDIO with device tree, take a look at the following
>>>>>> patches:
>>>>>>
>>>>>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
>>>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>>>>>
>>>>> I have been looking at the pandaboard patch in the series above and I
>>>>> do have a question. Among other things the patch adds these dt entries.
>>>>>
>>>>> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP |
>>>>> MODE0 */
>>>>> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP |
>>>>> MODE0 */
>>>>>
>>>>> If I look at the similar names in the deceased board-omap4panda.c:
>>>>>
>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
>>>>> OMAP_PIN_INPUT_PULLUP),
>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
>>>>> OMAP_PIN_INPUT_PULLUP),
>>>>>
>>>>> and in mux44xx.h:
>>>>>
>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
>>>>>
>>>>> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
>>>>> probably an explanation to it and it would help my understanding to
>>>>> know where this difference comes from. Hope you can help me out here.
>>>>>
>>>>
>>>> If you see omap4.dtsi, omap4_pmx_core starts at register address
>>>> 0x4a100040.
>>>>
>>>> So, you need to subtract 0x40 from the offsets defined in mux44xx.h
>>>> for pmx_core registers.
>>>
>>> That was what I was looking for. Thanks!
>>
>> Hi Roger,
>>
>> It has been a while, but I would like to pickup this thread. We have a couple of pandaboards used as test setup. These have an SDIO adapter hooked up to expansion connector A using MMC2. I have attached the patch file (just ignore platform_data stuff). Now on one board it works, but not for the other. I suspect a board issue so listing the two types that we use:
>>
>> PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
>> PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
>>
>> Any hints for me.
>
> Does your PandaboardES have the WLAN chip (U4) mounted? If yes, how do you isolate
> it from your external SDIO adapter?
OK, just realized that the expansion connector uses different pads for MMC2. However, you still
need to make sure that the other pins (connected to on board WLAN chip) are not muxed as MMC2.
>
> Most likely your Pandaboard (A2) doesn't have the WLAN chip (U3) on board so there is no problem there.
>
cheers,
-roger
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-10-01 9:53 ` Roger Quadros
@ 2013-10-01 10:53 ` Arend van Spriel
2013-10-01 11:29 ` Luca Coelho
2013-10-01 12:17 ` Roger Quadros
0 siblings, 2 replies; 32+ messages in thread
From: Arend van Spriel @ 2013-10-01 10:53 UTC (permalink / raw)
To: Roger Quadros; +Cc: Tony Lindgren, linux-omap, linux-kernel, Luciano Coelho
[-- Attachment #1: Type: text/plain, Size: 3025 bytes --]
On 10/01/2013 11:53 AM, Roger Quadros wrote:
> On 10/01/2013 12:49 PM, Roger Quadros wrote:
>> Hi Arend,
>>
>> On 10/01/2013 11:05 AM, Arend van Spriel wrote:
>>> On 07/19/2013 12:57 PM, Arend van Spriel wrote:
>>>> On 07/19/2013 12:49 PM, Roger Quadros wrote:
>>>>> On 07/19/2013 01:36 PM, Arend van Spriel wrote:
>>>>>> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
>>>>>>> Then for the SDIO with device tree, take a look at the following
>>>>>>> patches:
>>>>>>>
>>>>>>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
>>>>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>>>>>>
>>>>>> I have been looking at the pandaboard patch in the series above and I
>>>>>> do have a question. Among other things the patch adds these dt entries.
>>>>>>
>>>>>> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP |
>>>>>> MODE0 */
>>>>>> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP |
>>>>>> MODE0 */
>>>>>>
>>>>>> If I look at the similar names in the deceased board-omap4panda.c:
>>>>>>
>>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
>>>>>> OMAP_PIN_INPUT_PULLUP),
>>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
>>>>>> OMAP_PIN_INPUT_PULLUP),
>>>>>>
>>>>>> and in mux44xx.h:
>>>>>>
>>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
>>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
>>>>>>
>>>>>> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
>>>>>> probably an explanation to it and it would help my understanding to
>>>>>> know where this difference comes from. Hope you can help me out here.
>>>>>>
>>>>>
>>>>> If you see omap4.dtsi, omap4_pmx_core starts at register address
>>>>> 0x4a100040.
>>>>>
>>>>> So, you need to subtract 0x40 from the offsets defined in mux44xx.h
>>>>> for pmx_core registers.
>>>>
>>>> That was what I was looking for. Thanks!
>>>
>>> Hi Roger,
>>>
>>> It has been a while, but I would like to pickup this thread. We have a couple of pandaboards used as test setup. These have an SDIO adapter hooked up to expansion connector A using MMC2. I have attached the patch file (just ignore platform_data stuff). Now on one board it works, but not for the other. I suspect a board issue so listing the two types that we use:
>>>
>>> PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
>>> PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
>>>
>>> Any hints for me.
>>
>> Does your PandaboardES have the WLAN chip (U4) mounted? If yes, how do you isolate
>> it from your external SDIO adapter?
On my 4460 board in front of me U4 is not populated, but U3 is (the TiWi
thing).
>
> OK, just realized that the expansion connector uses different pads for MMC2. However, you still
> need to make sure that the other pins (connected to on board WLAN chip) are not muxed as MMC2.
I think Luciano added DT patches for on-board WLAN and it uses MMC5 if I
am not mistaken(?). Attached are the dmesg logs of the two boards.
Regards,
Arend
[-- Attachment #2: dmesg-4430.txt --]
[-- Type: text/plain, Size: 21754 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.11.0-wl-27553-g4a20162 (arend@arend-ubuntu-1) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #5 SMP Mon Sep 23 10:42:07 CEST 2013
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard
[ 0.000000] cma: CMA: reserved 16 MiB at ae800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 261888
[ 0.000000] free_area_init_node: node 0, pgdat c08835c0, node_mem_map c0ded000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67328 pages, LIFO batch:15
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1607000 s14208 r8192 d14464 u36864
[ 0.000000] pcpu-alloc: s14208 r8192 d14464 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1007680K/1047552K available (5750K kernel code, 614K rwdata, 1952K rodata, 381K init, 5522K bss, 39872K reserved, 269312K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc078d9c8 (7703 kB)
[ 0.000000] .init : 0xc078e000 - 0xc07ed780 ( 382 kB)
[ 0.000000] .data : 0xc07ee000 - 0xc0887ae0 ( 615 kB)
[ 0.000000] .bss : 0xc0887ae0 - 0xc0dec5e8 (5523 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] smp_twd: clock not found -2
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.001983] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.079528] pid_max: default: 32768 minimum: 301
[ 0.080352] Security Framework initialized
[ 0.080627] Mount-cache hash table entries: 512
[ 0.097442] CPU: Testing write buffer coherency: ok
[ 0.099487] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.099609] Calibrating local timer... 299.20MHz.
[ 0.159698] Setting up static identity map for 0xc0577e20 - 0xc0577e90
[ 0.159851] L310 cache controller enabled
[ 0.159851] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[ 0.165496] CPU1: Booted secondary processor
[ 0.199493] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.200134] Brought up 2 CPUs
[ 0.200164] SMP: Total of 2 processors activated (2382.23 BogoMIPS).
[ 0.200195] CPU: All CPU(s) started in SVC mode.
[ 0.203094] devtmpfs: initialized
[ 0.285430] pinctrl core: initialized pinctrl subsystem
[ 0.289245] regulator-dummy: no parameters
[ 0.292968] NET: Registered protocol family 16
[ 0.301971] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.390624] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.391998] OMAP GPIO hardware version 0.1
[ 0.393890] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.396484] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.399139] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.401733] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[ 0.404449] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[ 0.406463] omap-gpmc 50000000.gpmc: error: clk_get
[ 0.406524] omap-gpmc: probe of 50000000.gpmc failed with error -2
[ 0.442108] No ATAGs?
[ 0.442169] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.442169] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.447326] OMAP DMA hardware revision 0.0
[ 0.450714] ARM PMU: not yet supported on OMAP4430 due to missing CTI driver
[ 0.500152] bio: create slab <bio-0> at 0
[ 0.503601] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.503631] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.568725] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[ 0.569946] of_get_named_gpio_flags exited with status 62
[ 0.571105] hsusb1_reset: 3300 mV
[ 0.571563] of_get_named_gpio_flags exited with status 1
[ 0.572265] hsusb1_vbus: 3300 mV
[ 0.579559] SCSI subsystem initialized
[ 0.581390] usbcore: registered new interface driver usbfs
[ 0.581787] usbcore: registered new interface driver hub
[ 0.582336] usbcore: registered new device driver usb
[ 0.585571] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
[ 0.585601] platform 48070000.i2c: Driver omap_i2c requests probe deferral
[ 0.585693] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
[ 0.585723] platform 48072000.i2c: Driver omap_i2c requests probe deferral
[ 0.585784] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
[ 0.585815] platform 48060000.i2c: Driver omap_i2c requests probe deferral
[ 0.585906] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
[ 0.585937] platform 48350000.i2c: Driver omap_i2c requests probe deferral
[ 0.592956] Switched to clocksource 32k_counter
[ 0.721893] NET: Registered protocol family 2
[ 0.724060] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.724456] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.727600] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.727935] TCP: reno registered
[ 0.727966] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.728424] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.730010] NET: Registered protocol family 1
[ 0.731506] RPC: Registered named UNIX socket transport module.
[ 0.731536] RPC: Registered udp transport module.
[ 0.731536] RPC: Registered tcp transport module.
[ 0.731567] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.736053] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.736663] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.940246] bounce pool size: 64 pages
[ 0.941040] VFS: Disk quotas dquot_6.5.2
[ 0.941284] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.944152] NFS: Registering the id_resolver key type
[ 0.944580] Key type id_resolver registered
[ 0.944610] Key type id_legacy registered
[ 0.944763] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.945434] msgmni has been set to 1474
[ 0.948699] io scheduler noop registered
[ 0.948730] io scheduler deadline registered
[ 0.948852] io scheduler cfq registered (default)
[ 0.950897] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
[ 0.951568] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
[ 0.955657] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.961456] omap_uart 4806a000.serial: did not get pins for uart0 error: -19
[ 0.962677] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.964691] omap_uart 4806c000.serial: did not get pins for uart1 error: -19
[ 0.965148] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.966308] omap_uart 48020000.serial: did not get pins for uart2 error: -19
[ 0.966735] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 1.739318] console [ttyO2] enabled
[ 1.744628] omap_uart 4806e000.serial: did not get pins for uart3 error: -19
[ 1.752807] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 1.788665] brd: module loaded
[ 1.807922] loop: module loaded
[ 1.817199] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.836273] usbcore: registered new interface driver asix
[ 1.842407] usbcore: registered new interface driver ax88179_178a
[ 1.849273] usbcore: registered new interface driver cdc_ether
[ 1.855865] usbcore: registered new interface driver r815x
[ 1.862091] usbcore: registered new interface driver smsc95xx
[ 1.868591] usbcore: registered new interface driver net1080
[ 1.874999] usbcore: registered new interface driver cdc_subset
[ 1.881652] usbcore: registered new interface driver zaurus
[ 1.888061] usbcore: registered new interface driver cdc_ncm
[ 1.895385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.902343] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.902404] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.978363] ehci-omap 4a064c00.ehci: failed to get phys phandle in /ocp/usbhshost@4a064000/ehci@4a064c00 node
[ 1.978485] ehci-omap 4a064c00.ehci: EHCI Host Controller
[ 1.986694] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
[ 1.994842] ehci-omap 4a064c00.ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
[ 1.994873] ehci-omap 4a064c00.ehci: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM
[ 1.996520] ehci-omap 4a064c00.ehci: park 0
[ 1.996673] ehci-omap 4a064c00.ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.996765] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[ 2.003112] ehci-omap 4a064c00.ehci: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 2.023345] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[ 2.030395] usb usb1: default language 0x0409
[ 2.030487] usb usb1: udev 1, busnum 1, minor = 0
[ 2.030517] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.037780] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.045471] usb usb1: Product: EHCI Host Controller
[ 2.050659] usb usb1: Manufacturer: Linux 3.11.0-wl-27553-g4a20162 ehci_hcd
[ 2.058074] usb usb1: SerialNumber: 4a064c00.ehci
[ 2.065490] usb usb1: usb_probe_device
[ 2.065521] usb usb1: configuration #1 chosen from 1 choice
[ 2.066101] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.067199] hub 1-0:1.0: usb_probe_interface
[ 2.067230] hub 1-0:1.0: usb_probe_interface - got id
[ 2.067291] hub 1-0:1.0: USB hub found
[ 2.071411] hub 1-0:1.0: 3 ports detected
[ 2.075714] hub 1-0:1.0: standalone hub
[ 2.075744] hub 1-0:1.0: individual port power switching
[ 2.075744] hub 1-0:1.0: individual port over-current protection
[ 2.075775] hub 1-0:1.0: power on to power good time: 20ms
[ 2.076141] hub 1-0:1.0: local power source is good
[ 2.077514] hub 1-0:1.0: enabling power on all ports
[ 2.079223] usbcore: registered new interface driver cdc_wdm
[ 2.085754] usbcore: registered new interface driver usb-storage
[ 2.092529] usbcore: registered new interface driver usbtest
[ 2.100219] mousedev: PS/2 mouse device common for all mice
[ 2.111053] i2c /dev entries driver
[ 2.115112] Driver for 1-wire Dallas network protocol.
[ 2.122070] of_get_named_gpio_flags exited with status 86
[ 2.122467] ti-soc-thermal 4a002260.bandgap: failed to request fclock reference
[ 2.130676] ti-soc-thermal: probe of 4a002260.bandgap failed with error -2
[ 2.141540] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[ 2.151489] of_get_named_gpio_flags: can't parse gpios property
[ 2.151519] of_get_named_gpio_flags: can't parse gpios property
[ 2.152038] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 2.159851] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 2.167633] omap_hsmmc 4809c000.mmc: vmmc regulator missing
[ 2.174102] omap-dma-engine 4a056000.dma-controller: freeing channel for 61
[ 2.181518] omap-dma-engine 4a056000.dma-controller: freeing channel for 62
[ 2.189025] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[ 2.196624] of_get_named_gpio_flags: can't parse gpios property
[ 2.196655] of_get_named_gpio_flags: can't parse gpios property
[ 2.196899] omap-dma-engine 4a056000.dma-controller: allocating channel for 48
[ 2.204620] omap-dma-engine 4a056000.dma-controller: allocating channel for 47
[ 2.212341] omap_hsmmc 480b4000.mmc: vmmc regulator missing
[ 2.218322] omap-dma-engine 4a056000.dma-controller: freeing channel for 47
[ 2.225738] omap-dma-engine 4a056000.dma-controller: freeing channel for 48
[ 2.233215] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral
[ 2.240783] of_get_named_gpio_flags: can't parse gpios property
[ 2.240814] of_get_named_gpio_flags: can't parse gpios property
[ 2.241027] omap-dma-engine 4a056000.dma-controller: allocating channel for 60
[ 2.248779] omap-dma-engine 4a056000.dma-controller: allocating channel for 59
[ 2.256500] omap_hsmmc 480d5000.mmc: vmmc regulator missing
[ 2.262481] omap-dma-engine 4a056000.dma-controller: freeing channel for 59
[ 2.269897] omap-dma-engine 4a056000.dma-controller: freeing channel for 60
[ 2.277862] ehci-omap 4a064c00.ehci: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.277923] hub 1-0:1.0: port 1: status 0501 change 0001
[ 2.278900] of_get_named_gpio_flags exited with status 110
[ 2.278930] of_get_named_gpio_flags exited with status 8
[ 2.278961] of_get_named_gpio_flags exited with status 110
[ 2.280426] of_get_named_gpio_flags exited with status 8
[ 2.282379] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.289978] usbcore: registered new interface driver usbhid
[ 2.295959] usbhid: USB HID core driver
[ 2.301147] oprofile: using arm/armv7-ca9
[ 2.306182] TCP: cubic registered
[ 2.309722] Initializing XFRM netlink socket
[ 2.314422] NET: Registered protocol family 17
[ 2.319213] NET: Registered protocol family 15
[ 2.324310] Key type dns_resolver registered
[ 2.328948] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 2.338409] Power Management for TI OMAP4+ devices.
[ 2.343902] Power Management for TI OMAP4.
[ 2.348236] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[ 2.355560] ThumbEE CPU extension supported.
[ 2.368621] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz
[ 2.378997] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 2.390045] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 2.390228] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.391387] twl 0-0048: PIH (irq 39) chaining IRQs 416..436
[ 2.399749] twl_rtc rtc.11: Power up reset detected.
[ 2.406158] twl_rtc rtc.11: Enabling TWL-RTC
[ 2.416503] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0
[ 2.425750] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV
[ 2.433685] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 2.441680] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 2.447235] ehci-omap 4a064c00.ehci: port 1 reset complete, port enabled
[ 2.447235] ehci-omap 4a064c00.ehci: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.449981] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 2.457458] VPP: 1800 <--> 2500 mV at 1900 mV
[ 2.464752] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 2.471710] VDAC: 1800 mV
[ 2.476440] VANA: 2100 mV
[ 2.481475] VCXIO: 1800 mV
[ 2.486572] VUSB: 3300 mV
[ 2.491699] V1V8: 1800 mV
[ 2.496917] V2V1: 2100 mV
[ 2.503540] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 2.515808] of_get_named_gpio_flags exited with status 127
[ 2.523925] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz
[ 2.532165] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz
[ 2.541290] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz
[ 2.547729] of_get_named_gpio_flags: can't parse gpios property
[ 2.547729] of_get_named_gpio_flags: can't parse gpios property
[ 2.548126] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 2.555847] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 2.562866] ehci-omap 4a064c00.ehci: port 1 reset complete, port enabled
[ 2.563110] ehci-omap 4a064c00.ehci: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.567443] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[ 2.616851] of_get_named_gpio_flags: can't parse gpios property
[ 2.617340] of_get_named_gpio_flags: can't parse gpios property
[ 2.617523] omap-dma-engine 4a056000.dma-controller: allocating channel for 48
[ 2.625396] omap-dma-engine 4a056000.dma-controller: allocating channel for 47
[ 2.634246] omap_hsmmc 480b4000.mmc: pins are not configured from the driver
[ 2.667907] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.667968] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.675109] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.684082] usb 1-1: usb_probe_device
[ 2.684082] usb 1-1: configuration #1 chosen from 1 choice
[ 2.684417] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.685363] hub 1-1:1.0: usb_probe_interface
[ 2.685455] hub 1-1:1.0: usb_probe_interface - got id
[ 2.685546] hub 1-1:1.0: USB hub found
[ 2.689758] hub 1-1:1.0: 5 ports detected
[ 2.694122] hub 1-1:1.0: compound device; port removable status: FRRRR
[ 2.694183] hub 1-1:1.0: individual port power switching
[ 2.694183] hub 1-1:1.0: individual port over-current protection
[ 2.694915] hub 1-1:1.0: TT per port
[ 2.694915] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.694976] hub 1-1:1.0: power on to power good time: 100ms
[ 2.695648] hub 1-1:1.0: local power source is good
[ 2.695678] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 2.704193] hub 1-1:1.0: enabling power on all ports
[ 2.707153] Waiting for root device /dev/mmcblk0p2...
[ 2.831542] hub 1-1:1.0: port 1: status 0101 change 0001
[ 2.949920] usb 1-1: link qh256-0001/edcddc80 start 1 [1/0 us]
[ 2.950256] hub 1-1:1.0: state 7 ports 5 chg 0002 evt 0000
[ 2.950683] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 3.037536] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 3.183563] usb 1-1.1: udev 3, busnum 1, minor = 2
[ 3.183563] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.190979] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.198883] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.200225] usb 1-1.1: usb_probe_device
[ 3.200225] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.202636] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[ 3.203369] smsc95xx 1-1.1:1.0: usb_probe_interface
[ 3.203369] smsc95xx 1-1.1:1.0: usb_probe_interface - got id
[ 3.203552] smsc95xx v1.0.4
[ 3.212707] mmc0: new high speed SDHC card at address 0003
[ 3.221191] mmcblk0: mmc0:0003 SD8GB 7.41 GiB
[ 3.231719] mmcblk0: p1 p2
[ 3.261138] mmc1: new high speed SDIO card at address 0001
[ 3.583007] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 82:1a:d1:0e:6d:04
[ 3.596343] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
[ 3.689147] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem
[ 3.689147] EXT3-fs (mmcblk0p2): write access will be enabled during recovery
[ 4.895690] kjournald starting. Commit interval 5 seconds
[ 4.918884] EXT3-fs (mmcblk0p2): recovery complete
[ 4.924194] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 4.924224] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
[ 4.950469] devtmpfs: mounted
[ 4.950469] Freeing unused kernel memory: 380K (c078e000 - c07ed000)
[ 5.077758] EXT3-fs (mmcblk0p2): using internal journal
[ 7.591186] usb 1-1.1: link qh8-0001/edd43240 start 2 [1/0 us]
[ 7.592041] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 9.003845] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC9E1
[-- Attachment #3: dmesg-4460.txt --]
[-- Type: text/plain, Size: 21452 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.11.0-wl-27553-g4a20162 (arend@arend-ubuntu-1) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #5 SMP Mon Sep 23 10:42:07 CEST 2013
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard
[ 0.000000] cma: CMA: reserved 16 MiB at ae800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 261888
[ 0.000000] free_area_init_node: node 0, pgdat c08835c0, node_mem_map c0ded000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67328 pages, LIFO batch:15
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1607000 s14208 r8192 d14464 u36864
[ 0.000000] pcpu-alloc: s14208 r8192 d14464 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1007680K/1047552K available (5750K kernel code, 614K rwdata, 1952K rodata, 381K init, 5522K bss, 39872K reserved, 269312K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc078d9c8 (7703 kB)
[ 0.000000] .init : 0xc078e000 - 0xc07ed780 ( 382 kB)
[ 0.000000] .data : 0xc07ee000 - 0xc0887ae0 ( 615 kB)
[ 0.000000] .bss : 0xc0887ae0 - 0xc0dec5e8 (5523 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] smp_twd: clock not found -2
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.001464] Calibrating delay loop... 1391.00 BogoMIPS (lpj=6955008)
[ 0.079711] pid_max: default: 32768 minimum: 301
[ 0.080291] Security Framework initialized
[ 0.080474] Mount-cache hash table entries: 512
[ 0.094055] CPU: Testing write buffer coherency: ok
[ 0.095550] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.095550] Calibrating local timer... 348.95MHz.
[ 0.149810] Setting up static identity map for 0xc0577e20 - 0xc0577e90
[ 0.149902] L310 cache controller enabled
[ 0.149932] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[ 0.154510] CPU1: Booted secondary processor
[ 0.189636] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.190185] Brought up 2 CPUs
[ 0.190185] SMP: Total of 2 processors activated (2782.00 BogoMIPS).
[ 0.190216] CPU: All CPU(s) started in SVC mode.
[ 0.192626] devtmpfs: initialized
[ 0.269989] pinctrl core: initialized pinctrl subsystem
[ 0.273193] regulator-dummy: no parameters
[ 0.275939] NET: Registered protocol family 16
[ 0.283630] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.359100] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.360321] OMAP GPIO hardware version 0.1
[ 0.361907] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.364105] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.366302] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.368469] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[ 0.370819] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[ 0.372528] omap-gpmc 50000000.gpmc: error: clk_get
[ 0.372589] omap-gpmc: probe of 50000000.gpmc failed with error -2
[ 0.402313] No ATAGs?
[ 0.402374] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.402374] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.406616] OMAP DMA hardware revision 0.0
[ 0.451843] bio: create slab <bio-0> at 0
[ 0.454681] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.454711] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.509704] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[ 0.510681] of_get_named_gpio_flags exited with status 62
[ 0.511657] hsusb1_reset: 3300 mV
[ 0.512054] of_get_named_gpio_flags exited with status 1
[ 0.512573] hsusb1_vbus: 3300 mV
[ 0.518157] SCSI subsystem initialized
[ 0.520385] usbcore: registered new interface driver usbfs
[ 0.520721] usbcore: registered new interface driver hub
[ 0.521209] usbcore: registered new device driver usb
[ 0.523864] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
[ 0.523895] platform 48070000.i2c: Driver omap_i2c requests probe deferral
[ 0.523956] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
[ 0.523986] platform 48072000.i2c: Driver omap_i2c requests probe deferral
[ 0.524047] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
[ 0.524078] platform 48060000.i2c: Driver omap_i2c requests probe deferral
[ 0.524139] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
[ 0.524169] platform 48350000.i2c: Driver omap_i2c requests probe deferral
[ 0.530059] Switched to clocksource 32k_counter
[ 0.640991] NET: Registered protocol family 2
[ 0.642700] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.643035] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.645721] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.645965] TCP: reno registered
[ 0.646026] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.646392] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.647674] NET: Registered protocol family 1
[ 0.649017] RPC: Registered named UNIX socket transport module.
[ 0.649017] RPC: Registered udp transport module.
[ 0.649047] RPC: Registered tcp transport module.
[ 0.649047] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.652954] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.653472] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.826812] bounce pool size: 64 pages
[ 0.827392] VFS: Disk quotas dquot_6.5.2
[ 0.827606] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.829925] NFS: Registering the id_resolver key type
[ 0.830383] Key type id_resolver registered
[ 0.830413] Key type id_legacy registered
[ 0.830535] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.831085] msgmni has been set to 1474
[ 0.833831] io scheduler noop registered
[ 0.833862] io scheduler deadline registered
[ 0.833953] io scheduler cfq registered (default)
[ 0.835632] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
[ 0.836181] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
[ 0.839416] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.844390] omap_uart 4806a000.serial: did not get pins for uart0 error: -19
[ 0.845367] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.846771] omap_uart 4806c000.serial: did not get pins for uart1 error: -19
[ 0.847229] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.848358] omap_uart 48020000.serial: did not get pins for uart2 error: -19
[ 0.848724] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 1.607757] console [ttyO2] enabled
[ 1.612915] omap_uart 4806e000.serial: did not get pins for uart3 error: -19
[ 1.621002] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 1.652893] brd: module loaded
[ 1.669586] loop: module loaded
[ 1.677947] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.695129] usbcore: registered new interface driver asix
[ 1.701202] usbcore: registered new interface driver ax88179_178a
[ 1.707916] usbcore: registered new interface driver cdc_ether
[ 1.714416] usbcore: registered new interface driver r815x
[ 1.720550] usbcore: registered new interface driver smsc95xx
[ 1.726898] usbcore: registered new interface driver net1080
[ 1.733215] usbcore: registered new interface driver cdc_subset
[ 1.739746] usbcore: registered new interface driver zaurus
[ 1.746002] usbcore: registered new interface driver cdc_ncm
[ 1.753173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.760070] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.760101] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.835815] ehci-omap 4a064c00.ehci: failed to get phys phandle in /ocp/usbhshost@4a064000/ehci@4a064c00 node
[ 1.835937] ehci-omap 4a064c00.ehci: EHCI Host Controller
[ 1.843627] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
[ 1.851684] ehci-omap 4a064c00.ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
[ 1.851715] ehci-omap 4a064c00.ehci: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM
[ 1.852996] ehci-omap 4a064c00.ehci: park 0
[ 1.853118] ehci-omap 4a064c00.ehci: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.853179] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[ 1.859436] ehci-omap 4a064c00.ehci: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 1.870056] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[ 1.877044] usb usb1: default language 0x0409
[ 1.877136] usb usb1: udev 1, busnum 1, minor = 0
[ 1.877136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.884338] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.891967] usb usb1: Product: EHCI Host Controller
[ 1.897094] usb usb1: Manufacturer: Linux 3.11.0-wl-27553-g4a20162 ehci_hcd
[ 1.904449] usb usb1: SerialNumber: 4a064c00.ehci
[ 1.911437] usb usb1: usb_probe_device
[ 1.911437] usb usb1: configuration #1 chosen from 1 choice
[ 1.911926] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.912811] hub 1-0:1.0: usb_probe_interface
[ 1.912841] hub 1-0:1.0: usb_probe_interface - got id
[ 1.912902] hub 1-0:1.0: USB hub found
[ 1.916961] hub 1-0:1.0: 3 ports detected
[ 1.921203] hub 1-0:1.0: standalone hub
[ 1.921234] hub 1-0:1.0: individual port power switching
[ 1.921234] hub 1-0:1.0: individual port over-current protection
[ 1.921264] hub 1-0:1.0: power on to power good time: 20ms
[ 1.921569] hub 1-0:1.0: local power source is good
[ 1.922760] hub 1-0:1.0: enabling power on all ports
[ 1.924285] usbcore: registered new interface driver cdc_wdm
[ 1.930664] usbcore: registered new interface driver usb-storage
[ 1.937316] usbcore: registered new interface driver usbtest
[ 1.944946] mousedev: PS/2 mouse device common for all mice
[ 1.954742] i2c /dev entries driver
[ 1.958679] Driver for 1-wire Dallas network protocol.
[ 1.965454] of_get_named_gpio_flags exited with status 86
[ 1.969299] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.978729] of_get_named_gpio_flags: can't parse gpios property
[ 1.978729] of_get_named_gpio_flags: can't parse gpios property
[ 1.979125] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 1.986846] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 1.994537] omap_hsmmc 4809c000.mmc: vmmc regulator missing
[ 2.000671] omap-dma-engine 4a056000.dma-controller: freeing channel for 61
[ 2.008026] omap-dma-engine 4a056000.dma-controller: freeing channel for 62
[ 2.015441] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[ 2.023254] of_get_named_gpio_flags: can't parse gpios property
[ 2.023254] of_get_named_gpio_flags: can't parse gpios property
[ 2.023468] omap-dma-engine 4a056000.dma-controller: allocating channel for 48
[ 2.031127] omap-dma-engine 4a056000.dma-controller: allocating channel for 47
[ 2.038787] omap_hsmmc 480b4000.mmc: vmmc regulator missing
[ 2.044708] omap-dma-engine 4a056000.dma-controller: freeing channel for 47
[ 2.052062] omap-dma-engine 4a056000.dma-controller: freeing channel for 48
[ 2.059478] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral
[ 2.066986] of_get_named_gpio_flags: can't parse gpios property
[ 2.067016] of_get_named_gpio_flags: can't parse gpios property
[ 2.067199] omap-dma-engine 4a056000.dma-controller: allocating channel for 60
[ 2.074859] omap-dma-engine 4a056000.dma-controller: allocating channel for 59
[ 2.082550] omap_hsmmc 480d5000.mmc: vmmc regulator missing
[ 2.088439] omap-dma-engine 4a056000.dma-controller: freeing channel for 59
[ 2.095794] omap-dma-engine 4a056000.dma-controller: freeing channel for 60
[ 2.103576] ehci-omap 4a064c00.ehci: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.103607] hub 1-0:1.0: port 1: status 0501 change 0001
[ 2.104553] of_get_named_gpio_flags exited with status 110
[ 2.104553] of_get_named_gpio_flags exited with status 8
[ 2.104583] of_get_named_gpio_flags exited with status 110
[ 2.105743] of_get_named_gpio_flags exited with status 8
[ 2.107360] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.114715] usbcore: registered new interface driver usbhid
[ 2.120605] usbhid: USB HID core driver
[ 2.125549] oprofile: using arm/armv7-ca9
[ 2.130401] TCP: cubic registered
[ 2.133880] Initializing XFRM netlink socket
[ 2.138488] NET: Registered protocol family 17
[ 2.143249] NET: Registered protocol family 15
[ 2.148223] Key type dns_resolver registered
[ 2.152801] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 2.161926] Power Management for TI OMAP4+ devices.
[ 2.167114] Power Management for TI OMAP4.
[ 2.171630] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[ 2.178833] ThumbEE CPU extension supported.
[ 2.190155] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
[ 2.200531] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 2.210021] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 2.210784] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.212005] twl 0-0048: PIH (irq 39) chaining IRQs 416..436
[ 2.219635] twl_rtc rtc.11: Power up reset detected.
[ 2.225982] twl_rtc rtc.11: Enabling TWL-RTC
[ 2.235412] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0
[ 2.244262] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
[ 2.251800] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 2.259246] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 2.260009] ehci-omap 4a064c00.ehci: port 1 reset complete, port enabled
[ 2.260345] ehci-omap 4a064c00.ehci: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.266723] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 2.273651] VPP: 1800 <--> 2500 mV at 1900 mV
[ 2.280517] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 2.287200] VDAC: 1800 mV
[ 2.291656] VANA: 2100 mV
[ 2.296478] VCXIO: 1800 mV
[ 2.301055] VUSB: 3300 mV
[ 2.305847] V1V8: 1800 mV
[ 2.310882] V2V1: 2100 mV
[ 2.320098] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 2.327392] of_get_named_gpio_flags exited with status 127
[ 2.334442] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
[ 2.342742] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
[ 2.351623] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
[ 2.357910] of_get_named_gpio_flags: can't parse gpios property
[ 2.357910] of_get_named_gpio_flags: can't parse gpios property
[ 2.358062] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[ 2.365997] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[ 2.377075] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[ 2.385070] ehci-omap 4a064c00.ehci: port 1 reset complete, port enabled
[ 2.385223] ehci-omap 4a064c00.ehci: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.429504] of_get_named_gpio_flags: can't parse gpios property
[ 2.429504] of_get_named_gpio_flags: can't parse gpios property
[ 2.429687] omap-dma-engine 4a056000.dma-controller: allocating channel for 48
[ 2.437713] omap-dma-engine 4a056000.dma-controller: allocating channel for 47
[ 2.446838] omap_hsmmc 480b4000.mmc: pins are not configured from the driver
[ 2.477966] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.477966] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.485260] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.493804] usb 1-1: usb_probe_device
[ 2.493927] usb 1-1: configuration #1 chosen from 1 choice
[ 2.494140] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.494842] hub 1-1:1.0: usb_probe_interface
[ 2.495025] hub 1-1:1.0: usb_probe_interface - got id
[ 2.495025] hub 1-1:1.0: USB hub found
[ 2.495025] hub 1-1:1.0: 5 ports detected
[ 2.499969] hub 1-1:1.0: compound device; port removable status: FRRRR
[ 2.503662] hub 1-1:1.0: individual port power switching
[ 2.503662] hub 1-1:1.0: individual port over-current protection
[ 2.503753] hub 1-1:1.0: TT per port
[ 2.504150] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.504150] hub 1-1:1.0: power on to power good time: 100ms
[ 2.504821] hub 1-1:1.0: local power source is good
[ 2.504821] hub 1-1:1.0: enabling power on all ports
[ 2.514099] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 2.526214] Waiting for root device /dev/mmcblk0p2...
[ 2.618835] hub 1-1:1.0: port 1: status 0101 change 0001
[ 2.832550] usb 1-1: link qh256-0001/edd31b00 start 1 [1/0 us]
[ 2.832580] hub 1-1:1.0: state 7 ports 5 chg 0002 evt 0000
[ 2.833618] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 2.948486] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 2.991729] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.002410] mmc0: new high speed SDHC card at address 0003
[ 3.010467] mmcblk0: mmc0:0003 SD8GB 7.41 GiB
[ 3.019744] mmcblk0: p1 p2
[ 3.060180] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem
[ 3.067413] EXT3-fs (mmcblk0p2): write access will be enabled during recovery
[ 3.090789] usb 1-1.1: udev 3, busnum 1, minor = 2
[ 3.090789] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.098266] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.107055] usb 1-1.1: usb_probe_device
[ 3.107055] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.109252] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[ 3.109802] smsc95xx 1-1.1:1.0: usb_probe_interface
[ 3.109802] smsc95xx 1-1.1:1.0: usb_probe_interface - got id
[ 3.109985] smsc95xx v1.0.4
[ 3.230041] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 9a:1b:56:a2:3a:20
[ 3.242462] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
[ 4.016113] kjournald starting. Commit interval 5 seconds
[ 4.420196] EXT3-fs (mmcblk0p2): recovery complete
[ 4.420196] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 4.432708] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
[ 4.445373] devtmpfs: mounted
[ 4.445831] Freeing unused kernel memory: 380K (c078e000 - c07ed000)
[ 4.756530] EXT3-fs (mmcblk0p2): using internal journal
[ 7.207397] usb 1-1.1: link qh8-0001/eddccf00 start 2 [1/0 us]
[ 7.207946] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 8.385925] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC9E1
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-10-01 10:53 ` Arend van Spriel
@ 2013-10-01 11:29 ` Luca Coelho
2013-10-02 10:20 ` Arend van Spriel
2013-10-01 12:17 ` Roger Quadros
1 sibling, 1 reply; 32+ messages in thread
From: Luca Coelho @ 2013-10-01 11:29 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Roger Quadros, Tony Lindgren, linux-omap, linux-kernel
Hi,
On Tue, 2013-10-01 at 12:53 +0200, Arend van Spriel wrote:
> On 10/01/2013 11:53 AM, Roger Quadros wrote:
> > On 10/01/2013 12:49 PM, Roger Quadros wrote:
> >> Hi Arend,
> >>
> >> On 10/01/2013 11:05 AM, Arend van Spriel wrote:
> >>> On 07/19/2013 12:57 PM, Arend van Spriel wrote:
> >>>> On 07/19/2013 12:49 PM, Roger Quadros wrote:
> >>>>> On 07/19/2013 01:36 PM, Arend van Spriel wrote:
> >>>>>> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
> >>>>>>> Then for the SDIO with device tree, take a look at the following
> >>>>>>> patches:
> >>>>>>>
> >>>>>>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
> >>>>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
> >>>>>>
> >>>>>> I have been looking at the pandaboard patch in the series above and I
> >>>>>> do have a question. Among other things the patch adds these dt entries.
> >>>>>>
> >>>>>> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP |
> >>>>>> MODE0 */
> >>>>>> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP |
> >>>>>> MODE0 */
> >>>>>>
> >>>>>> If I look at the similar names in the deceased board-omap4panda.c:
> >>>>>>
> >>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
> >>>>>> OMAP_PIN_INPUT_PULLUP),
> >>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
> >>>>>> OMAP_PIN_INPUT_PULLUP),
> >>>>>>
> >>>>>> and in mux44xx.h:
> >>>>>>
> >>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
> >>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
> >>>>>>
> >>>>>> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
> >>>>>> probably an explanation to it and it would help my understanding to
> >>>>>> know where this difference comes from. Hope you can help me out here.
> >>>>>>
> >>>>>
> >>>>> If you see omap4.dtsi, omap4_pmx_core starts at register address
> >>>>> 0x4a100040.
> >>>>>
> >>>>> So, you need to subtract 0x40 from the offsets defined in mux44xx.h
> >>>>> for pmx_core registers.
> >>>>
> >>>> That was what I was looking for. Thanks!
> >>>
> >>> Hi Roger,
> >>>
> >>> It has been a while, but I would like to pickup this thread. We have a couple of pandaboards used as test setup. These have an SDIO adapter hooked up to expansion connector A using MMC2. I have attached the patch file (just ignore platform_data stuff). Now on one board it works, but not for the other. I suspect a board issue so listing the two types that we use:
> >>>
> >>> PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
> >>> PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
> >>>
> >>> Any hints for me.
> >>
> >> Does your PandaboardES have the WLAN chip (U4) mounted? If yes, how do you isolate
> >> it from your external SDIO adapter?
>
> On my 4460 board in front of me U4 is not populated, but U3 is (the TiWi
> thing).
>
> >
> > OK, just realized that the expansion connector uses different pads for MMC2. However, you still
> > need to make sure that the other pins (connected to on board WLAN chip) are not muxed as MMC2.
>
> I think Luciano added DT patches for on-board WLAN and it uses MMC5 if I
> am not mistaken(?). Attached are the dmesg logs of the two boards.
I sent 2 patch series to add DT support for the on-board WLAN, but they
were not applied, since there were some comments that required changes.
I really don't have the time to revisit them now that I'm not with TI
anymore, so I'm hoping someone else will pick them up at some point.
FWIW, my patches were working with PandaBoardES rev B1, which was also
OMAP4460 ES1.1. It worked fine for me, *except* that sometimes for some
unknown reason the SDIO MMC connected to WiLink didn't get probed (as it
appears to be the case on your dmesg-4460.txt).
Most weirdly, it seems that booting the board with a non-DT kernel and
then booting back to the DT kernel seemed to help and the problem was
gone for many reboots, until it happened again. I never figure out why
this was happening, though. :(
--
Cheers,
Luca.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-10-01 10:53 ` Arend van Spriel
2013-10-01 11:29 ` Luca Coelho
@ 2013-10-01 12:17 ` Roger Quadros
2013-10-01 13:19 ` Balaji T K
1 sibling, 1 reply; 32+ messages in thread
From: Roger Quadros @ 2013-10-01 12:17 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Tony Lindgren, linux-omap, linux-kernel, luca
On 10/01/2013 01:53 PM, Arend van Spriel wrote:
> On 10/01/2013 11:53 AM, Roger Quadros wrote:
>> On 10/01/2013 12:49 PM, Roger Quadros wrote:
>>> Hi Arend,
>>>
>>> On 10/01/2013 11:05 AM, Arend van Spriel wrote:
>>>> On 07/19/2013 12:57 PM, Arend van Spriel wrote:
>>>>> On 07/19/2013 12:49 PM, Roger Quadros wrote:
>>>>>> On 07/19/2013 01:36 PM, Arend van Spriel wrote:
>>>>>>> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
>>>>>>>> Then for the SDIO with device tree, take a look at the following
>>>>>>>> patches:
>>>>>>>>
>>>>>>>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
>>>>>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>>>>>>>
>>>>>>> I have been looking at the pandaboard patch in the series above and I
>>>>>>> do have a question. Among other things the patch adds these dt entries.
>>>>>>>
>>>>>>> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP |
>>>>>>> MODE0 */
>>>>>>> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP |
>>>>>>> MODE0 */
>>>>>>>
>>>>>>> If I look at the similar names in the deceased board-omap4panda.c:
>>>>>>>
>>>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
>>>>>>> OMAP_PIN_INPUT_PULLUP),
>>>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
>>>>>>> OMAP_PIN_INPUT_PULLUP),
>>>>>>>
>>>>>>> and in mux44xx.h:
>>>>>>>
>>>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
>>>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
>>>>>>>
>>>>>>> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
>>>>>>> probably an explanation to it and it would help my understanding to
>>>>>>> know where this difference comes from. Hope you can help me out here.
>>>>>>>
>>>>>>
>>>>>> If you see omap4.dtsi, omap4_pmx_core starts at register address
>>>>>> 0x4a100040.
>>>>>>
>>>>>> So, you need to subtract 0x40 from the offsets defined in mux44xx.h
>>>>>> for pmx_core registers.
>>>>>
>>>>> That was what I was looking for. Thanks!
>>>>
>>>> Hi Roger,
>>>>
>>>> It has been a while, but I would like to pickup this thread. We have a couple of pandaboards used as test setup. These have an SDIO adapter hooked up to expansion connector A using MMC2. I have attached the patch file (just ignore platform_data stuff). Now on one board it works, but not for the other. I suspect a board issue so listing the two types that we use:
>>>>
>>>> PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
>>>> PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
>>>>
>>>> Any hints for me.
>>>
>>> Does your PandaboardES have the WLAN chip (U4) mounted? If yes, how do you isolate
>>> it from your external SDIO adapter?
>
> On my 4460 board in front of me U4 is not populated, but U3 is (the TiWi thing).
>
>>
>> OK, just realized that the expansion connector uses different pads for MMC2. However, you still
>> need to make sure that the other pins (connected to on board WLAN chip) are not muxed as MMC2.
>
> I think Luciano added DT patches for on-board WLAN and it uses MMC5 if I am not mistaken(?). Attached are the dmesg logs of the two boards.
Right. WLAN is supposed to use MMC5. But if you don't have Luca's patches, can you please ensure that those pins are muxed either as safe mode
or as MMC5? Default seems to be safe mode, but you should cross check.
Also in your patches you have set mmc2-clk to PIN_INPUT_PULLUP
Shouldn't it be PIN_OUTPUT?
Still I have no clue why it works on 4430 and not on 4460. Are you using the same bootloader image on both boards?
cheers,
-roger
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-10-01 12:17 ` Roger Quadros
@ 2013-10-01 13:19 ` Balaji T K
2013-10-02 9:03 ` Arend van Spriel
0 siblings, 1 reply; 32+ messages in thread
From: Balaji T K @ 2013-10-01 13:19 UTC (permalink / raw)
To: Arend van Spriel
Cc: Roger Quadros, Tony Lindgren, linux-omap, linux-kernel, luca
>>>>> Hi Roger,
>>>>>
>>>>> It has been a while, but I would like to pickup this thread. We have a couple of pandaboards used as test setup. These have an SDIO adapter hooked up to expansion connector A using MMC2. I have attached the patch file (just ignore platform_data stuff). Now on one board it works, but not for the other. I suspect a board issue so listing the two types that we use:
>>>>>
>>>>> PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
>>>>> PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
>>>>>
>>>>> Any hints for me.
>>>>
>>>> Does your PandaboardES have the WLAN chip (U4) mounted? If yes, how do you isolate
>>>> it from your external SDIO adapter?
>>
>> On my 4460 board in front of me U4 is not populated, but U3 is (the TiWi thing).
>>
>>>
>>> OK, just realized that the expansion connector uses different pads for MMC2. However, you still
>>> need to make sure that the other pins (connected to on board WLAN chip) are not muxed as MMC2.
>>
>> I think Luciano added DT patches for on-board WLAN and it uses MMC5 if I am not mistaken(?). Attached are the dmesg logs of the two boards.
>
> Right. WLAN is supposed to use MMC5. But if you don't have Luca's patches, can you please ensure that those pins are muxed either as safe mode
> or as MMC5? Default seems to be safe mode, but you should cross check.
>
> Also in your patches you have set mmc2-clk to PIN_INPUT_PULLUP
> Shouldn't it be PIN_OUTPUT?
>
> Still I have no clue why it works on 4430 and not on 4460. Are you using the same bootloader image on both boards?
>
if you are using vaux1, can you check the voltage levels,
From dmesg you attached,
vaux1 is set to 1.8V on omap4430 and to 2.8V on OMAP4460
4430
[ 2.425750] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV
4460
[ 2.244262] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
Can you also check with MMC_DEBUG enabled for any clues.
> cheers,
> -roger
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-10-01 13:19 ` Balaji T K
@ 2013-10-02 9:03 ` Arend van Spriel
0 siblings, 0 replies; 32+ messages in thread
From: Arend van Spriel @ 2013-10-02 9:03 UTC (permalink / raw)
To: Balaji T K; +Cc: Roger Quadros, Tony Lindgren, linux-omap, linux-kernel, luca
On 10/01/2013 03:19 PM, Balaji T K wrote:
>>>>>> Hi Roger,
>>>>>>
>>>>>> It has been a while, but I would like to pickup this thread. We
>>>>>> have a couple of pandaboards used as test setup. These have an
>>>>>> SDIO adapter hooked up to expansion connector A using MMC2. I have
>>>>>> attached the patch file (just ignore platform_data stuff). Now on
>>>>>> one board it works, but not for the other. I suspect a board issue
>>>>>> so listing the two types that we use:
>>>>>>
>>>>>> PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
>>>>>> PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
>>>>>>
>>>>>> Any hints for me.
>>>>>
>>>>> Does your PandaboardES have the WLAN chip (U4) mounted? If yes, how
>>>>> do you isolate
>>>>> it from your external SDIO adapter?
>>>
>>> On my 4460 board in front of me U4 is not populated, but U3 is (the
>>> TiWi thing).
>>>
>>>>
>>>> OK, just realized that the expansion connector uses different pads
>>>> for MMC2. However, you still
>>>> need to make sure that the other pins (connected to on board WLAN
>>>> chip) are not muxed as MMC2.
>>>
>>> I think Luciano added DT patches for on-board WLAN and it uses MMC5
>>> if I am not mistaken(?). Attached are the dmesg logs of the two boards.
>>
>> Right. WLAN is supposed to use MMC5. But if you don't have Luca's
>> patches, can you please ensure that those pins are muxed either as
>> safe mode
>> or as MMC5? Default seems to be safe mode, but you should cross check.
>>
>> Also in your patches you have set mmc2-clk to PIN_INPUT_PULLUP
>> Shouldn't it be PIN_OUTPUT?
>>
>> Still I have no clue why it works on 4430 and not on 4460. Are you
>> using the same bootloader image on both boards?
>>
> if you are using vaux1, can you check the voltage levels,
>
> From dmesg you attached,
> vaux1 is set to 1.8V on omap4430 and to 2.8V on OMAP4460
>
> 4430
> [ 2.425750] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV
>
> 4460
> [ 2.244262] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
Nice catch. Not sure whether this is an issue, but worth looking into.
> Can you also check with MMC_DEBUG enabled for any clues.
building....
>> cheers,
>> -roger
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-10-01 11:29 ` Luca Coelho
@ 2013-10-02 10:20 ` Arend van Spriel
2013-10-02 10:48 ` Luca Coelho
0 siblings, 1 reply; 32+ messages in thread
From: Arend van Spriel @ 2013-10-02 10:20 UTC (permalink / raw)
To: Luca Coelho; +Cc: Roger Quadros, Tony Lindgren, linux-omap, linux-kernel
On 10/01/2013 01:29 PM, Luca Coelho wrote:
> Hi,
>
> On Tue, 2013-10-01 at 12:53 +0200, Arend van Spriel wrote:
>> On 10/01/2013 11:53 AM, Roger Quadros wrote:
>>> On 10/01/2013 12:49 PM, Roger Quadros wrote:
>>>> Hi Arend,
>>>>
>>>> On 10/01/2013 11:05 AM, Arend van Spriel wrote:
>>>>> On 07/19/2013 12:57 PM, Arend van Spriel wrote:
>>>>>> On 07/19/2013 12:49 PM, Roger Quadros wrote:
>>>>>>> On 07/19/2013 01:36 PM, Arend van Spriel wrote:
>>>>>>>> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
>>>>>>>>> Then for the SDIO with device tree, take a look at the following
>>>>>>>>> patches:
>>>>>>>>>
>>>>>>>>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
>>>>>>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>>>>>>>>
>>>>>>>> I have been looking at the pandaboard patch in the series above and I
>>>>>>>> do have a question. Among other things the patch adds these dt entries.
>>>>>>>>
>>>>>>>> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP |
>>>>>>>> MODE0 */
>>>>>>>> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP |
>>>>>>>> MODE0 */
>>>>>>>>
>>>>>>>> If I look at the similar names in the deceased board-omap4panda.c:
>>>>>>>>
>>>>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
>>>>>>>> OMAP_PIN_INPUT_PULLUP),
>>>>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
>>>>>>>> OMAP_PIN_INPUT_PULLUP),
>>>>>>>>
>>>>>>>> and in mux44xx.h:
>>>>>>>>
>>>>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
>>>>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
>>>>>>>>
>>>>>>>> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
>>>>>>>> probably an explanation to it and it would help my understanding to
>>>>>>>> know where this difference comes from. Hope you can help me out here.
>>>>>>>>
>>>>>>>
>>>>>>> If you see omap4.dtsi, omap4_pmx_core starts at register address
>>>>>>> 0x4a100040.
>>>>>>>
>>>>>>> So, you need to subtract 0x40 from the offsets defined in mux44xx.h
>>>>>>> for pmx_core registers.
>>>>>>
>>>>>> That was what I was looking for. Thanks!
>>>>>
>>>>> Hi Roger,
>>>>>
>>>>> It has been a while, but I would like to pickup this thread. We have a couple of pandaboards used as test setup. These have an SDIO adapter hooked up to expansion connector A using MMC2. I have attached the patch file (just ignore platform_data stuff). Now on one board it works, but not for the other. I suspect a board issue so listing the two types that we use:
>>>>>
>>>>> PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
>>>>> PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
>>>>>
>>>>> Any hints for me.
>>>>
>>>> Does your PandaboardES have the WLAN chip (U4) mounted? If yes, how do you isolate
>>>> it from your external SDIO adapter?
>>
>> On my 4460 board in front of me U4 is not populated, but U3 is (the TiWi
>> thing).
>>
>>>
>>> OK, just realized that the expansion connector uses different pads for MMC2. However, you still
>>> need to make sure that the other pins (connected to on board WLAN chip) are not muxed as MMC2.
>>
>> I think Luciano added DT patches for on-board WLAN and it uses MMC5 if I
>> am not mistaken(?). Attached are the dmesg logs of the two boards.
>
> I sent 2 patch series to add DT support for the on-board WLAN, but they
> were not applied, since there were some comments that required changes.
> I really don't have the time to revisit them now that I'm not with TI
> anymore, so I'm hoping someone else will pick them up at some point.
I found this one in my email archive:
[PATCH v2 0/4] ARM: dts: add WiLink support to panda and omap4-sdp
Guess that is what you are referring to, right?
Gr. AvS
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet]
2013-10-02 10:20 ` Arend van Spriel
@ 2013-10-02 10:48 ` Luca Coelho
0 siblings, 0 replies; 32+ messages in thread
From: Luca Coelho @ 2013-10-02 10:48 UTC (permalink / raw)
To: Arend van Spriel; +Cc: Roger Quadros, Tony Lindgren, linux-omap, linux-kernel
On Wed, 2013-10-02 at 12:20 +0200, Arend van Spriel wrote:
> On 10/01/2013 01:29 PM, Luca Coelho wrote:
> > Hi,
> >
> > On Tue, 2013-10-01 at 12:53 +0200, Arend van Spriel wrote:
> >> On 10/01/2013 11:53 AM, Roger Quadros wrote:
> >>> On 10/01/2013 12:49 PM, Roger Quadros wrote:
> >>>> Hi Arend,
> >>>>
> >>>> On 10/01/2013 11:05 AM, Arend van Spriel wrote:
> >>>>> On 07/19/2013 12:57 PM, Arend van Spriel wrote:
> >>>>>> On 07/19/2013 12:49 PM, Roger Quadros wrote:
> >>>>>>> On 07/19/2013 01:36 PM, Arend van Spriel wrote:
> >>>>>>>> On 07/18/2013 10:59 AM, Tony Lindgren wrote:
> >>>>>>>>> Then for the SDIO with device tree, take a look at the following
> >>>>>>>>> patches:
> >>>>>>>>>
> >>>>>>>>> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
> >>>>>>>>> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
> >>>>>>>>
> >>>>>>>> I have been looking at the pandaboard patch in the series above and I
> >>>>>>>> do have a question. Among other things the patch adds these dt entries.
> >>>>>>>>
> >>>>>>>> + 0x108 0x118 /* sdmmc5_clk.sdmmc5_clk INPUT_PULLUP |
> >>>>>>>> MODE0 */
> >>>>>>>> + 0x10a 0x118 /* sdmmc5_cmd.sdmmc5_cmd INPUT_PULLUP |
> >>>>>>>> MODE0 */
> >>>>>>>>
> >>>>>>>> If I look at the similar names in the deceased board-omap4panda.c:
> >>>>>>>>
> >>>>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 |
> >>>>>>>> OMAP_PIN_INPUT_PULLUP),
> >>>>>>>> board-omap4panda.c: OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 |
> >>>>>>>> OMAP_PIN_INPUT_PULLUP),
> >>>>>>>>
> >>>>>>>> and in mux44xx.h:
> >>>>>>>>
> >>>>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET 0x0148
> >>>>>>>> mux44xx.h:#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET 0x014a
> >>>>>>>>
> >>>>>>>> So how did 0x0148 get 0x0108 in DT and 0x014a get 0x010a. There is
> >>>>>>>> probably an explanation to it and it would help my understanding to
> >>>>>>>> know where this difference comes from. Hope you can help me out here.
> >>>>>>>>
> >>>>>>>
> >>>>>>> If you see omap4.dtsi, omap4_pmx_core starts at register address
> >>>>>>> 0x4a100040.
> >>>>>>>
> >>>>>>> So, you need to subtract 0x40 from the offsets defined in mux44xx.h
> >>>>>>> for pmx_core registers.
> >>>>>>
> >>>>>> That was what I was looking for. Thanks!
> >>>>>
> >>>>> Hi Roger,
> >>>>>
> >>>>> It has been a while, but I would like to pickup this thread. We have a couple of pandaboards used as test setup. These have an SDIO adapter hooked up to expansion connector A using MMC2. I have attached the patch file (just ignore platform_data stuff). Now on one board it works, but not for the other. I suspect a board issue so listing the two types that we use:
> >>>>>
> >>>>> PandaBoard rev A2 (dmesg: OMAP4430 ES2.1): works
> >>>>> PandaBoardES rev B1 (dmesg: OMAP4460 ES1.1): nope
> >>>>>
> >>>>> Any hints for me.
> >>>>
> >>>> Does your PandaboardES have the WLAN chip (U4) mounted? If yes, how do you isolate
> >>>> it from your external SDIO adapter?
> >>
> >> On my 4460 board in front of me U4 is not populated, but U3 is (the TiWi
> >> thing).
> >>
> >>>
> >>> OK, just realized that the expansion connector uses different pads for MMC2. However, you still
> >>> need to make sure that the other pins (connected to on board WLAN chip) are not muxed as MMC2.
> >>
> >> I think Luciano added DT patches for on-board WLAN and it uses MMC5 if I
> >> am not mistaken(?). Attached are the dmesg logs of the two boards.
> >
> > I sent 2 patch series to add DT support for the on-board WLAN, but they
> > were not applied, since there were some comments that required changes.
> > I really don't have the time to revisit them now that I'm not with TI
> > anymore, so I'm hoping someone else will pick them up at some point.
>
> I found this one in my email archive:
>
> [PATCH v2 0/4] ARM: dts: add WiLink support to panda and omap4-sdp
>
> Guess that is what you are referring to, right?
Yes, that one and also this (which implements DT in the driver itself):
[PATCH v4 0/8] wilink: add device tree support
http://mid.gmane.org/1375189476-21557-1-git-send-email-coelho@ti.com
--
Luca.
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2013-10-02 10:48 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-18 8:41 Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet Arend van Spriel
2013-07-18 8:59 ` Tony Lindgren
2013-07-18 10:18 ` Arend van Spriel
2013-07-19 10:36 ` Arend van Spriel
2013-07-19 10:49 ` Roger Quadros
2013-07-19 10:57 ` Arend van Spriel
2013-10-01 8:05 ` using mmc2 on panda [was: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet] Arend van Spriel
2013-10-01 9:49 ` Roger Quadros
2013-10-01 9:53 ` Roger Quadros
2013-10-01 10:53 ` Arend van Spriel
2013-10-01 11:29 ` Luca Coelho
2013-10-02 10:20 ` Arend van Spriel
2013-10-02 10:48 ` Luca Coelho
2013-10-01 12:17 ` Roger Quadros
2013-10-01 13:19 ` Balaji T K
2013-10-02 9:03 ` Arend van Spriel
2013-07-19 10:53 ` Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet Tony Lindgren
2013-07-20 7:38 ` Luciano Coelho
2013-07-18 11:18 ` Roger Quadros
2013-07-18 11:24 ` Arend van Spriel
2013-07-18 11:30 ` Roger Quadros
2013-07-18 12:38 ` Arend van Spriel
2013-07-18 12:42 ` Roger Quadros
2013-07-25 13:06 ` Arend van Spriel
2013-07-26 2:49 ` Joel Fernandes
2013-07-26 3:00 ` Joel Fernandes
2013-07-26 7:25 ` Arend van Spriel
2013-07-26 10:13 ` Arend van Spriel
2013-07-26 10:15 ` Arend van Spriel
2013-07-26 10:23 ` Arend van Spriel
2013-07-26 10:37 ` Roger Quadros
2013-07-26 10:40 ` Arend van Spriel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).