[PATCH v9 0/4] The 1st version of suspend for RK3288.

[PATCH v9 0/4] The 1st version of suspend for RK3288.

[Chris Zhong]

This suspend patch is only support cut off the power of cpu and some external
devices, since we still lack power_domain driver, so the other power rail
of rk3288 need keep power on.
I have tested it on rk3288-evb board, atop next-20141124. goto suspend by type
"echo mem > /sys/power/state", vdd_cpu is about 0mv by measuring, so it can be
determined in sleep mode, then press power button to wakeup it.

Changes in v9:
- fold Doug's patches
- modify some print log
- update the subject and description

Changes in v8:
- use enum for define sleep mode
- move rk3288_config_bootdata to the front of sram memcpy
- set vdd_gpu to 1.0v during suspend
- add regulator-on-in-suspend before set suspend voltage

Changes in v7:
- get rid all of unused code
- add regulator-state-mem sub node for suspend

Changes in v6:
- get rid of the save/restore of SRAM
- doing the copy of resume code once at init time
- remove ROCKCHIP_ARM_OFF_LOGIC_DEEP from rk3288_fill_in_bootram
- add of_platform_populate in rockchip_dt_init
- change pmu_intmem@ff720000 to sram@ff720000
- change pmu_intmem@ff720000 to sram@ff720000

Changes in v5:
- use rk3288_bootram_sz for memcpy size
- fixed error of sram save and restore
- change the size of sram in example
- change size to 4k

Changes in v4:
- remove grf regmap

Changes in v3:
- move the pinmux of gpio6_c6 save and restore to pinctrl-rockchip

Changes in v2:
- add the regulator calls in prepare and finish.
- add the pinmux of gpio6_c6 save and restore
- put "rockchip,rk3288-pmu-sram" to first

Chris Zhong (4):
  ARM: rockchip: add suspend and resume for RK3288
  ARM: rockchip: Add pmu-sram binding
  ARM: dts: add RK3288 suspend support
  ARM: dts: rockchip: add suspend settings for rk3288-evb-rk808

 .../devicetree/bindings/arm/rockchip/pmu-sram.txt  |  16 ++
 arch/arm/boot/dts/rk3288-evb-rk808.dts             |  51 +++-
 arch/arm/boot/dts/rk3288.dtsi                      |  11 +
 arch/arm/mach-rockchip/Makefile                    |   1 +
 arch/arm/mach-rockchip/pm.c                        | 260 +++++++++++++++++++++
 arch/arm/mach-rockchip/pm.h                        |  99 ++++++++
 arch/arm/mach-rockchip/rockchip.c                  |   2 +
 arch/arm/mach-rockchip/sleep.S                     |  73 ++++++
 8 files changed, 512 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt
 create mode 100644 arch/arm/mach-rockchip/pm.c
 create mode 100644 arch/arm/mach-rockchip/pm.h
 create mode 100644 arch/arm/mach-rockchip/sleep.S

-- 
1.9.1

[PATCH v9 1/4] ARM: rockchip: add suspend and resume for RK3288

[Chris Zhong]

It's a basic version of suspend and resume for rockchip,
it only support RK3288 now.

Signed-off-by: Tony Xie <xxx@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>

---

Changes in v9:
- fold Doug's patches
- modify some print log

Changes in v8:
- use enum for define sleep mode
- move rk3288_config_bootdata to the front of sram memcpy

Changes in v7:
- get rid all of unused code

Changes in v6:
- get rid of the save/restore of SRAM
- doing the copy of resume code once at init time
- remove ROCKCHIP_ARM_OFF_LOGIC_DEEP from rk3288_fill_in_bootram
- add of_platform_populate in rockchip_dt_init

Changes in v5:
- use rk3288_bootram_sz for memcpy size
- fixed error of sram save and restore

Changes in v4:
- remove grf regmap

Changes in v3:
- move the pinmux of gpio6_c6 save and restore to pinctrl-rockchip

Changes in v2:
- add the regulator calls in prepare and finish.
- add the pinmux of gpio6_c6 save and restore

 arch/arm/mach-rockchip/Makefile   |   1 +
 arch/arm/mach-rockchip/pm.c       | 260 ++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-rockchip/pm.h       |  99 +++++++++++++++
 arch/arm/mach-rockchip/rockchip.c |   2 +
 arch/arm/mach-rockchip/sleep.S    |  73 +++++++++++
 5 files changed, 435 insertions(+)
 create mode 100644 arch/arm/mach-rockchip/pm.c
 create mode 100644 arch/arm/mach-rockchip/pm.h
 create mode 100644 arch/arm/mach-rockchip/sleep.S

diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index b29d8ea..5c3a9b2 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -1,4 +1,5 @@
 CFLAGS_platsmp.o := -march=armv7-a
 
 obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o
+obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
new file mode 100644
index 0000000..50cb781
--- /dev/null
+++ b/arch/arm/mach-rockchip/pm.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Author: Tony Xie <tony.xie@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/suspend.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/suspend.h>
+
+#include "pm.h"
+
+/* These enum are option of low power mode */
+enum {
+	ROCKCHIP_ARM_OFF_LOGIC_NORMAL = 0,
+	ROCKCHIP_ARM_OFF_LOGIC_DEEP = 1,
+};
+
+struct rockchip_pm_data {
+	const struct platform_suspend_ops *ops;
+	int (*init)(struct device_node *np);
+};
+
+static void __iomem *rk3288_bootram_base;
+static phys_addr_t rk3288_bootram_phy;
+
+static struct regmap *pmu_regmap;
+static struct regmap *sgrf_regmap;
+
+static u32 rk3288_pmu_pwr_mode_con;
+static u32 rk3288_sgrf_soc_con0;
+
+static inline u32 rk3288_l2_config(void)
+{
+	u32 l2ctlr;
+
+	asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (l2ctlr));
+	return l2ctlr;
+}
+
+static void rk3288_config_bootdata(void)
+{
+	rkpm_bootdata_cpusp = rk3288_bootram_phy + (SZ_4K - 8);
+	rkpm_bootdata_cpu_code = virt_to_phys(cpu_resume);
+
+	rkpm_bootdata_l2ctlr_f  = 1;
+	rkpm_bootdata_l2ctlr = rk3288_l2_config();
+}
+
+static void rk3288_slp_mode_set(int level)
+{
+	u32 mode_set, mode_set1;
+
+	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
+
+	regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
+		    &rk3288_pmu_pwr_mode_con);
+
+	/* set bit 8 so that system will resume to FAST_BOOT_ADDR */
+	regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
+		     SGRF_FAST_BOOT_EN | SGRF_FAST_BOOT_EN_WRITE);
+
+	/* booting address of resuming system is from this register value */
+	regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
+		     rk3288_bootram_phy);
+
+	regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
+		     PMU_ARMINT_WAKEUP_EN);
+
+	mode_set = BIT(PMU_GLOBAL_INT_DISABLE) | BIT(PMU_L2FLUSH_EN) |
+		   BIT(PMU_SREF0_ENTER_EN) | BIT(PMU_SREF1_ENTER_EN) |
+		   BIT(PMU_DDR0_GATING_EN) | BIT(PMU_DDR1_GATING_EN) |
+		   BIT(PMU_PWR_MODE_EN) | BIT(PMU_CHIP_PD_EN) |
+		   BIT(PMU_SCU_EN);
+
+	mode_set1 = BIT(PMU_CLR_CORE) | BIT(PMU_CLR_CPUP);
+
+	if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) {
+		/* arm off, logic deep sleep */
+		mode_set |= BIT(PMU_BUS_PD_EN) |
+			    BIT(PMU_DDR1IO_RET_EN) | BIT(PMU_DDR0IO_RET_EN) |
+			    BIT(PMU_OSC_24M_DIS) | BIT(PMU_PMU_USE_LF) |
+			    BIT(PMU_ALIVE_USE_LF) | BIT(PMU_PLL_PD_EN);
+
+		mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) |
+			     BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA);
+	} else {
+		/*
+		 * arm off, logic normal
+		 * if pmu_clk_core_src_gate_en is not set,
+		 * wakeup will be error
+		 */
+		mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN);
+	}
+
+	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set);
+	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON1, mode_set1);
+}
+
+static void rk3288_slp_mode_set_resume(void)
+{
+	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON,
+		     rk3288_pmu_pwr_mode_con);
+
+	regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
+		     rk3288_sgrf_soc_con0 | SGRF_FAST_BOOT_EN_WRITE);
+}
+
+static int rockchip_lpmode_enter(unsigned long arg)
+{
+	flush_cache_all();
+
+	cpu_do_idle();
+
+	pr_err("%s: Failed to suspend\n", __func__);
+
+	return 1;
+}
+
+static int rk3288_suspend_enter(suspend_state_t state)
+{
+	local_fiq_disable();
+
+	rk3288_slp_mode_set(ROCKCHIP_ARM_OFF_LOGIC_NORMAL);
+
+	cpu_suspend(0, rockchip_lpmode_enter);
+
+	rk3288_slp_mode_set_resume();
+
+	local_fiq_enable();
+
+	return 0;
+}
+
+static int rk3288_suspend_prepare(void)
+{
+	return regulator_suspend_prepare(PM_SUSPEND_MEM);
+}
+
+static void rk3288_suspend_finish(void)
+{
+	if (regulator_suspend_finish())
+		pr_err("%s: Suspend finish failed\n", __func__);
+}
+
+static int rk3288_suspend_init(struct device_node *np)
+{
+	struct device_node *sram_np;
+	struct resource res;
+	int ret;
+
+	pmu_regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(pmu_regmap)) {
+		pr_err("%s: could not find pmu regmap\n", __func__);
+		return PTR_ERR(pmu_regmap);
+	}
+
+	sgrf_regmap = syscon_regmap_lookup_by_compatible(
+				"rockchip,rk3288-sgrf");
+	if (IS_ERR(sgrf_regmap)) {
+		pr_err("%s: could not find sgrf regmap\n", __func__);
+		return PTR_ERR(pmu_regmap);
+	}
+
+	sram_np = of_find_compatible_node(NULL, NULL,
+					  "rockchip,rk3288-pmu-sram");
+	if (!sram_np) {
+		pr_err("%s: could not find bootram dt node\n", __func__);
+		return -ENODEV;
+	}
+
+	rk3288_bootram_base = of_iomap(sram_np, 0);
+	if (!rk3288_bootram_base) {
+		pr_err("%s: could not map bootram base\n", __func__);
+		return -ENOMEM;
+	}
+
+	ret = of_address_to_resource(sram_np, 0, &res);
+	if (ret) {
+		pr_err("%s: could not get bootram phy addr\n", __func__);
+		return ret;
+	}
+	rk3288_bootram_phy = res.start;
+
+	of_node_put(sram_np);
+
+	rk3288_config_bootdata();
+
+	/* copy resume code and data to bootsram */
+	memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume,
+	       rk3288_bootram_sz);
+
+	return 0;
+}
+
+static const struct platform_suspend_ops rk3288_suspend_ops = {
+	.enter   = rk3288_suspend_enter,
+	.valid   = suspend_valid_only_mem,
+	.prepare = rk3288_suspend_prepare,
+	.finish  = rk3288_suspend_finish,
+};
+
+static const struct rockchip_pm_data rk3288_pm_data __initconst = {
+	.ops = &rk3288_suspend_ops,
+	.init = rk3288_suspend_init,
+};
+
+static const struct of_device_id rockchip_pmu_of_device_ids[] __initconst = {
+	{
+		.compatible = "rockchip,rk3288-pmu",
+		.data = &rk3288_pm_data,
+	},
+	{ /* sentinel */ },
+};
+
+void __init rockchip_suspend_init(void)
+{
+	const struct rockchip_pm_data *pm_data;
+	const struct of_device_id *match;
+	struct device_node *np;
+	int ret;
+
+	np = of_find_matching_node_and_match(NULL, rockchip_pmu_of_device_ids,
+					     &match);
+	if (!match) {
+		pr_err("Failed to find PMU node\n");
+		return;
+	}
+	pm_data = (struct rockchip_pm_data *) match->data;
+
+	if (pm_data->init) {
+		ret = pm_data->init(np);
+
+		if (ret) {
+			pr_err("%s: matches init error %d\n", __func__, ret);
+			return;
+		}
+	}
+
+	suspend_set_ops(pm_data->ops);
+}
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
new file mode 100644
index 0000000..99722d0
--- /dev/null
+++ b/arch/arm/mach-rockchip/pm.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Author: Tony Xie <tony.xie@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __MACH_ROCKCHIP_PM_H
+#define __MACH_ROCKCHIP_PM_H
+
+extern unsigned long rkpm_bootdata_cpusp;
+extern unsigned long rkpm_bootdata_cpu_code;
+extern unsigned long rkpm_bootdata_l2ctlr_f;
+extern unsigned long rkpm_bootdata_l2ctlr;
+extern unsigned long rkpm_bootdata_ddr_code;
+extern unsigned long rkpm_bootdata_ddr_data;
+extern unsigned long rk3288_bootram_sz;
+
+void rockchip_slp_cpu_resume(void);
+void __init rockchip_suspend_init(void);
+
+/****** following is rk3288 defined **********/
+#define RK3288_PMU_WAKEUP_CFG0          0x00
+#define RK3288_PMU_WAKEUP_CFG1          0x04
+#define RK3288_PMU_PWRMODE_CON          0x18
+#define RK3288_PMU_OSC_CNT              0x20
+#define RK3288_PMU_PLL_CNT              0x24
+#define RK3288_PMU_STABL_CNT            0x28
+#define RK3288_PMU_DDR0IO_PWRON_CNT     0x2c
+#define RK3288_PMU_DDR1IO_PWRON_CNT     0x30
+#define RK3288_PMU_CORE_PWRDWN_CNT      0x34
+#define RK3288_PMU_CORE_PWRUP_CNT       0x38
+#define RK3288_PMU_GPU_PWRDWN_CNT       0x3c
+#define RK3288_PMU_GPU_PWRUP_CNT        0x40
+#define RK3288_PMU_WAKEUP_RST_CLR_CNT   0x44
+#define RK3288_PMU_PWRMODE_CON1         0x90
+
+#define RK3288_SGRF_SOC_CON0            (0x0000)
+#define RK3288_SGRF_FAST_BOOT_ADDR      (0x0120)
+#define SGRF_FAST_BOOT_EN		BIT(8)
+#define SGRF_FAST_BOOT_EN_WRITE		BIT(24)
+
+#define RK3288_CRU_MODE_CON (0x50)
+#define RK3288_CRU_SEL0_CON (0x60)
+#define RK3288_CRU_SEL1_CON (0x64)
+#define RK3288_CRU_SEL10_CON (0x88)
+#define RK3288_CRU_SEL33_CON (0xe4)
+#define RK3288_CRU_SEL37_CON (0xf4)
+
+/* PMU_WAKEUP_CFG1 bits */
+#define PMU_ARMINT_WAKEUP_EN BIT(0)
+
+enum rk3288_pwr_mode_con {
+	PMU_PWR_MODE_EN = 0,
+	PMU_CLK_CORE_SRC_GATE_EN,
+	PMU_GLOBAL_INT_DISABLE,
+	PMU_L2FLUSH_EN,
+	PMU_BUS_PD_EN,
+	PMU_A12_0_PD_EN,
+	PMU_SCU_EN,
+	PMU_PLL_PD_EN,
+	PMU_CHIP_PD_EN, /* POWER OFF PIN ENABLE */
+	PMU_PWROFF_COMB,
+	PMU_ALIVE_USE_LF,
+	PMU_PMU_USE_LF,
+	PMU_OSC_24M_DIS,
+	PMU_INPUT_CLAMP_EN,
+	PMU_WAKEUP_RESET_EN,
+	PMU_SREF0_ENTER_EN,
+	PMU_SREF1_ENTER_EN,
+	PMU_DDR0IO_RET_EN,
+	PMU_DDR1IO_RET_EN,
+	PMU_DDR0_GATING_EN,
+	PMU_DDR1_GATING_EN,
+	PMU_DDR0IO_RET_DE_REQ,
+	PMU_DDR1IO_RET_DE_REQ
+};
+
+enum rk3288_pwr_mode_con1 {
+	PMU_CLR_BUS = 0,
+	PMU_CLR_CORE,
+	PMU_CLR_CPUP,
+	PMU_CLR_ALIVE,
+	PMU_CLR_DMA,
+	PMU_CLR_PERI,
+	PMU_CLR_GPU,
+	PMU_CLR_VIDEO,
+	PMU_CLR_HEVC,
+	PMU_CLR_VIO,
+};
+
+#endif /* __MACH_ROCKCHIP_PM_H */
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index d226b71..2b68a1a 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -23,9 +23,11 @@
 #include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "core.h"
+#include "pm.h"
 
 static void __init rockchip_dt_init(void)
 {
+	rockchip_suspend_init();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	platform_device_register_simple("cpufreq-dt", 0, NULL, 0);
 }
diff --git a/arch/arm/mach-rockchip/sleep.S b/arch/arm/mach-rockchip/sleep.S
new file mode 100644
index 0000000..2eec9a3
--- /dev/null
+++ b/arch/arm/mach-rockchip/sleep.S
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Author: Tony Xie <tony.xie@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/memory.h>
+
+.data
+/*
+ * this code will be copied from
+ * ddr to sram for system resumeing.
+ * so it is ".data section".
+ */
+.align
+
+ENTRY(rockchip_slp_cpu_resume)
+	setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1  @ set svc, irqs off
+	mrc	p15, 0, r1, c0, c0, 5
+	and	r1, r1, #0xf
+	cmp	r1, #0
+	/* olny cpu0 can continue to run, the others is halt here */
+	beq	cpu0run
+secondary_loop:
+	wfe
+	b	secondary_loop
+cpu0run:
+	ldr	r3, rkpm_bootdata_l2ctlr_f
+	cmp	r3, #0
+	beq	sp_set
+	ldr	r3, rkpm_bootdata_l2ctlr
+	mcr	p15, 1, r3, c9, c0, 2
+sp_set:
+	ldr	sp, rkpm_bootdata_cpusp
+	ldr	r1, rkpm_bootdata_cpu_code
+	bx	r1
+ENDPROC(rockchip_slp_cpu_resume)
+
+/* Parameters filled in by the kernel */
+
+/* Flag for whether to restore L2CTLR on resume */
+	.global rkpm_bootdata_l2ctlr_f
+rkpm_bootdata_l2ctlr_f:
+	.long 0
+
+/* Saved L2CTLR to restore on resume */
+	.global rkpm_bootdata_l2ctlr
+rkpm_bootdata_l2ctlr:
+	.long 0
+
+/* CPU resume SP addr */
+	.globl rkpm_bootdata_cpusp
+rkpm_bootdata_cpusp:
+	.long 0
+
+/* CPU resume function (physical address) */
+	.globl rkpm_bootdata_cpu_code
+rkpm_bootdata_cpu_code:
+	.long 0
+
+ENTRY(rk3288_bootram_sz)
+        .word   . - rockchip_slp_cpu_resume
-- 
1.9.1

[PATCH v9 2/4] ARM: rockchip: Add pmu-sram binding

[Chris Zhong]

The pmu-sram is used to store resume code, suspend/resume need get the
address of it. Therefore add a binding and documentation for it.

Signed-off-by: Tony Xie <xxx@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>

---

Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6:
- change pmu_intmem@ff720000 to sram@ff720000

Changes in v5:
- change the size of sram in example

Changes in v4: None
Changes in v3: None
Changes in v2: None

 .../devicetree/bindings/arm/rockchip/pmu-sram.txt        | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt

diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt
new file mode 100644
index 0000000..6b42fda
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt
@@ -0,0 +1,16 @@
+Rockchip SRAM for pmu:
+------------------------------
+
+The sram of pmu is used to store the function of resume from maskrom(the 1st
+level loader). This is a common use of the "pmu-sram" because it keeps power
+even in low power states in the system.
+
+Required node properties:
+- compatible : should be "rockchip,rk3288-pmu-sram"
+- reg : physical base address and the size of the registers window
+
+Example:
+	sram@ff720000 {
+		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+		reg = <0xff720000 0x1000>;
+	};
-- 
1.9.1

[PATCH v9 3/4] ARM: dts: add RK3288 suspend support

[Chris Zhong]

add pmu sram node for suspend, add global_pwroff pinctrl.
The pmu sram is used to store the resume code.
global_pwroff is held low level at work, it would be pull to high
when entering suspend. reference this in the board DTS file since
some boards need it.

Signed-off-by: Tony Xie <xxx@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>

---

Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6:
- change pmu_intmem@ff720000 to sram@ff720000

Changes in v5:
- change size to 4k

Changes in v4: None
Changes in v3: None
Changes in v2:
- put "rockchip,rk3288-pmu-sram" to first

 arch/arm/boot/dts/rk3288.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index d83ca93..c11b44c 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -481,6 +481,11 @@
 		};
 	};
 
+	sram@ff720000 {
+		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+		reg = <0xff720000 0x1000>;
+	};
+
 	pmu: power-management@ff730000 {
 		compatible = "rockchip,rk3288-pmu", "syscon";
 		reg = <0xff730000 0x100>;
@@ -704,6 +709,12 @@
 			bias-disable;
 		};
 
+		sleep {
+			global_pwroff: global-pwroff {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
-- 
1.9.1

[PATCH v9 4/4] ARM: dts: rockchip: add suspend settings for rk3288-evb-rk808

[Chris Zhong]

Add suspend-voltages and necessary pin-states for suspend on
rk3288-evb-rk808 boards. global_pwroff would be pulled high when
RK3288 entering suspend, this pin is a sleep signal for RK808, so
RK808 could goto sleep mode, and some regulators would be disable.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v9:
- update the subject and description

Changes in v8:
- set vdd_gpu to 1.0v during suspend
- add regulator-on-in-suspend before set suspend voltage

Changes in v7:
- add regulator-state-mem sub node for suspend

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/boot/dts/rk3288-evb-rk808.dts | 51 +++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index d8c775e6..742bd89 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -31,7 +31,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>;
+		pinctrl-0 = <&pmic_int &global_pwroff>;
 		rockchip,system-power-controller;
 		wakeup-source;
 		#clock-cells = <1>;
@@ -50,6 +50,9 @@
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vdd_gpu: DCDC_REG2 {
@@ -58,12 +61,20 @@
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1250000>;
 				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
 			};
 
 			vcc_ddr: DCDC_REG3 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-name = "vcc_ddr";
+				regulator-suspend-mem-enabled;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			vcc_io: DCDC_REG4 {
@@ -72,6 +83,10 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
 			};
 
 			vccio_pmu: LDO_REG1 {
@@ -80,6 +95,10 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
 			};
 
 			vcc_tp: LDO_REG2 {
@@ -88,6 +107,9 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcc_tp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vdd_10: LDO_REG3 {
@@ -96,6 +118,10 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
 			};
 
 			vcc18_lcd: LDO_REG4 {
@@ -104,6 +130,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vccio_sd: LDO_REG5 {
@@ -112,6 +141,9 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vdd10_lcd: LDO_REG6 {
@@ -120,6 +152,9 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vcc_18: LDO_REG7 {
@@ -128,6 +163,11 @@
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-name = "vcc_18";
+				regulator-suspend-mem-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
 			};
 
 			vcca_codec: LDO_REG8 {
@@ -136,18 +176,27 @@
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcca_codec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			vcc_wl: SWITCH_REG1 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			vcc_lcd: SWITCH_REG2 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 		};
 	};
-- 
1.9.1

Re: [PATCH v9 4/4] ARM: dts: rockchip: add suspend settings for rk3288-evb-rk808

[Doug Anderson]

Chris,

On Mon, Nov 24, 2014 at 11:32 PM, Chris Zhong <zyw@rock-chips.com> wrote:
>                         vcc_ddr: DCDC_REG3 {
>                                 regulator-always-on;
>                                 regulator-boot-on;
>                                 regulator-name = "vcc_ddr";
> +                               regulator-suspend-mem-enabled;

The "regulator-suspend-mem-enabled" is not an upstream property and
isn't doing anything.  It should be removed.

Possibly this is something Heiko could do when applying  (depends on
what he wants) if no other spins are required.
>                         vcc_18: LDO_REG7 {
> @@ -128,6 +163,11 @@
>                                 regulator-min-microvolt = <1800000>;
>                                 regulator-max-microvolt = <1800000>;
>                                 regulator-name = "vcc_18";
> +                               regulator-suspend-mem-microvolt = <1800000>;

Another non-upstream property: regulator-suspend-mem-microvolt

Re: [PATCH v9 4/4] ARM: dts: rockchip: add suspend settings for rk3288-evb-rk808

[Chris Zhong]

On 11/27/2014 06:52 AM, Doug Anderson wrote:
> Chris,
>
> On Mon, Nov 24, 2014 at 11:32 PM, Chris Zhong <zyw@rock-chips.com> wrote:
>>                          vcc_ddr: DCDC_REG3 {
>>                                  regulator-always-on;
>>                                  regulator-boot-on;
>>                                  regulator-name = "vcc_ddr";
>> +                               regulator-suspend-mem-enabled;
> The "regulator-suspend-mem-enabled" is not an upstream property and
> isn't doing anything.  It should be removed.
>
> Possibly this is something Heiko could do when applying  (depends on
> what he wants) if no other spins are required.
>>                          vcc_18: LDO_REG7 {
>> @@ -128,6 +163,11 @@
>>                                  regulator-min-microvolt = <1800000>;
>>                                  regulator-max-microvolt = <1800000>;
>>                                  regulator-name = "vcc_18";
>> +                               regulator-suspend-mem-microvolt = <1800000>;
> Another non-upstream property: regulator-suspend-mem-microvolt
Ah, missed these two. I should remove all the regulator-suspend-mem-*, 
they are from Gerrit.
Thank you.
>
>
>

Re: [PATCH v9 3/4] ARM: dts: add RK3288 suspend support

[Doug Anderson]

Chris,

On Mon, Nov 24, 2014 at 11:32 PM, Chris Zhong <zyw@rock-chips.com> wrote:
> add pmu sram node for suspend, add global_pwroff pinctrl.
> The pmu sram is used to store the resume code.
> global_pwroff is held low level at work, it would be pull to high
> when entering suspend. reference this in the board DTS file since
> some boards need it.
>
> Signed-off-by: Tony Xie <xxx@rock-chips.com>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Tested-by: Doug Anderson <dianders@chromium.org>
>
> ---
>
> Changes in v9: None

This is untrue.  v8 had more stuff than v9.  See:

https://patchwork.kernel.org/patch/5311621/

vs.

https://patchwork.kernel.org/patch/5372911/

I prefer v8.

Re: [PATCH v9 3/4] ARM: dts: add RK3288 suspend support

[Chris Zhong]

On 12/01/2014 01:26 PM, Doug Anderson wrote:
> Chris,
>
> On Mon, Nov 24, 2014 at 11:32 PM, Chris Zhong <zyw@rock-chips.com> wrote:
>> add pmu sram node for suspend, add global_pwroff pinctrl.
>> The pmu sram is used to store the resume code.
>> global_pwroff is held low level at work, it would be pull to high
>> when entering suspend. reference this in the board DTS file since
>> some boards need it.
>>
>> Signed-off-by: Tony Xie <xxx@rock-chips.com>
>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>> Reviewed-by: Doug Anderson <dianders@chromium.org>
>> Tested-by: Doug Anderson <dianders@chromium.org>
>>
>> ---
>>
>> Changes in v9: None
> This is untrue.  v8 had more stuff than v9.  See:
>
> https://patchwork.kernel.org/patch/5311621/
>
> vs.
>
> https://patchwork.kernel.org/patch/5372911/
>
> I prefer v8.
>
>
>
Ah, I missed the ddr pinctrl in V9, Thank you.
I have modified it, and post the V10.