* [PATCH] MMC/SDIO: enable SDIO device to suspend/resume asynchronously @ 2015-07-30 7:40 Fu, Zhonghui 2015-08-17 3:26 ` Fu, Zhonghui 0 siblings, 1 reply; 7+ messages in thread From: Fu, Zhonghui @ 2015-07-30 7:40 UTC (permalink / raw) To: Ulf Hansson, Adrian Hunter, neilb, Jaehoon Chung, afenkart, joe Cc: linux-mmc, linux-kernel Enable SDIO card and function device to suspend/resume asynchronously. This can improve system suspend/resume speed. Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com> --- drivers/mmc/core/sdio.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index b91abed..6719b77 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -1106,6 +1106,8 @@ int mmc_attach_sdio(struct mmc_host *host) pm_runtime_enable(&card->dev); } + device_enable_async_suspend(&card->dev); + /* * The number of functions on the card is encoded inside * the ocr. @@ -1126,6 +1128,8 @@ int mmc_attach_sdio(struct mmc_host *host) */ if (host->caps & MMC_CAP_POWER_OFF_CARD) pm_runtime_enable(&card->sdio_func[i]->dev); + + device_enable_async_suspend(&card->sdio_func[i]->dev); } /* -- 1.7.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] MMC/SDIO: enable SDIO device to suspend/resume asynchronously 2015-07-30 7:40 [PATCH] MMC/SDIO: enable SDIO device to suspend/resume asynchronously Fu, Zhonghui @ 2015-08-17 3:26 ` Fu, Zhonghui 2015-08-17 6:48 ` Adrian Hunter 0 siblings, 1 reply; 7+ messages in thread From: Fu, Zhonghui @ 2015-08-17 3:26 UTC (permalink / raw) To: Ulf Hansson, Adrian Hunter, neilb, Jaehoon Chung, afenkart, joe Cc: linux-mmc, linux-kernel Hi, Any comments are welcome. Thanks, Zhonghui On 2015/7/30 15:40, Fu, Zhonghui wrote: > Enable SDIO card and function device to suspend/resume asynchronously. > This can improve system suspend/resume speed. > > Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com> > --- > drivers/mmc/core/sdio.c | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c > index b91abed..6719b77 100644 > --- a/drivers/mmc/core/sdio.c > +++ b/drivers/mmc/core/sdio.c > @@ -1106,6 +1106,8 @@ int mmc_attach_sdio(struct mmc_host *host) > pm_runtime_enable(&card->dev); > } > > + device_enable_async_suspend(&card->dev); > + > /* > * The number of functions on the card is encoded inside > * the ocr. > @@ -1126,6 +1128,8 @@ int mmc_attach_sdio(struct mmc_host *host) > */ > if (host->caps & MMC_CAP_POWER_OFF_CARD) > pm_runtime_enable(&card->sdio_func[i]->dev); > + > + device_enable_async_suspend(&card->sdio_func[i]->dev); > } > > /* > -- 1.7.1 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] MMC/SDIO: enable SDIO device to suspend/resume asynchronously 2015-08-17 3:26 ` Fu, Zhonghui @ 2015-08-17 6:48 ` Adrian Hunter 2015-08-24 7:07 ` Fu, Zhonghui 0 siblings, 1 reply; 7+ messages in thread From: Adrian Hunter @ 2015-08-17 6:48 UTC (permalink / raw) To: Fu, Zhonghui, Ulf Hansson, neilb, Jaehoon Chung, afenkart, joe Cc: linux-mmc, linux-kernel On 17/08/15 06:26, Fu, Zhonghui wrote: > > Hi, > > Any comments are welcome. > > > Thanks, > Zhonghui > > On 2015/7/30 15:40, Fu, Zhonghui wrote: >> Enable SDIO card and function device to suspend/resume asynchronously. >> This can improve system suspend/resume speed. For me, it needs more explanation. For example, why is this worth doing? Can you give an example where it does significantly improve suspend/resume speed? Are there any cases where it could be worse? Why is it safe? Presumably it is safe if there are no dependencies on the device outside the device hierarchy. Is that so? Are there any other potential pitfalls to enabling async_suspend? >> >> Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com> >> --- >> drivers/mmc/core/sdio.c | 4 ++++ >> 1 files changed, 4 insertions(+), 0 deletions(-) >> >> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c >> index b91abed..6719b77 100644 >> --- a/drivers/mmc/core/sdio.c >> +++ b/drivers/mmc/core/sdio.c >> @@ -1106,6 +1106,8 @@ int mmc_attach_sdio(struct mmc_host *host) >> pm_runtime_enable(&card->dev); >> } >> >> + device_enable_async_suspend(&card->dev); >> + >> /* >> * The number of functions on the card is encoded inside >> * the ocr. >> @@ -1126,6 +1128,8 @@ int mmc_attach_sdio(struct mmc_host *host) >> */ >> if (host->caps & MMC_CAP_POWER_OFF_CARD) >> pm_runtime_enable(&card->sdio_func[i]->dev); >> + >> + device_enable_async_suspend(&card->sdio_func[i]->dev); >> } >> >> /* >> -- 1.7.1 >> > > > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] MMC/SDIO: enable SDIO device to suspend/resume asynchronously 2015-08-17 6:48 ` Adrian Hunter @ 2015-08-24 7:07 ` Fu, Zhonghui [not found] ` <55FF95CA.4010108@linux.intel.com> 0 siblings, 1 reply; 7+ messages in thread From: Fu, Zhonghui @ 2015-08-24 7:07 UTC (permalink / raw) To: Adrian Hunter, Ulf Hansson, neilb, Jaehoon Chung, afenkart, joe Cc: linux-mmc, linux-kernel On 2015/8/17 14:48, Adrian Hunter wrote: > On 17/08/15 06:26, Fu, Zhonghui wrote: >> Hi, >> >> Any comments are welcome. >> >> >> Thanks, >> Zhonghui >> >> On 2015/7/30 15:40, Fu, Zhonghui wrote: >>> Enable SDIO card and function device to suspend/resume asynchronously. >>> This can improve system suspend/resume speed. > For me, it needs more explanation. > > For example, why is this worth doing? Can you give an example where it does > significantly improve suspend/resume speed? Are there any cases where it > could be worse? > > Why is it safe? Presumably it is safe if there are no dependencies on the > device outside the device hierarchy. Is that so? Are there any other > potential pitfalls to enabling async_suspend? Now, PM core support asynchronous device suspend/resume mode. If one device has been set to support asynchronous PM mode, it's suspend/resume operation can be performed in a separate kernel thread and take advantage of multicore feature to improve overall system suspend/resume speed. The worst case is that all device suspend/resume threads will be scheduled to the same CPU, it hardly occur. PM core ensure all the suspend/resume dependency related to one device. Actually, async suspend/resume mode is one feature of PM core, every device subsystem may use it or not use it. Once one device subsystem choose to use this feature, its safety is up to PM core as long as device subsystem has initialized fully this device. Thanks, Zhonghui > >>> Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com> >>> --- >>> drivers/mmc/core/sdio.c | 4 ++++ >>> 1 files changed, 4 insertions(+), 0 deletions(-) >>> >>> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c >>> index b91abed..6719b77 100644 >>> --- a/drivers/mmc/core/sdio.c >>> +++ b/drivers/mmc/core/sdio.c >>> @@ -1106,6 +1106,8 @@ int mmc_attach_sdio(struct mmc_host *host) >>> pm_runtime_enable(&card->dev); >>> } >>> >>> + device_enable_async_suspend(&card->dev); >>> + >>> /* >>> * The number of functions on the card is encoded inside >>> * the ocr. >>> @@ -1126,6 +1128,8 @@ int mmc_attach_sdio(struct mmc_host *host) >>> */ >>> if (host->caps & MMC_CAP_POWER_OFF_CARD) >>> pm_runtime_enable(&card->sdio_func[i]->dev); >>> + >>> + device_enable_async_suspend(&card->sdio_func[i]->dev); >>> } >>> >>> /* >>> -- 1.7.1 >>> >> >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <55FF95CA.4010108@linux.intel.com>]
* Re: [PATCH] MMC/SDIO: enable SDIO device to suspend/resume asynchronously [not found] ` <55FF95CA.4010108@linux.intel.com> @ 2015-09-21 8:15 ` Adrian Hunter 2015-09-21 8:41 ` Adrian Hunter 0 siblings, 1 reply; 7+ messages in thread From: Adrian Hunter @ 2015-09-21 8:15 UTC (permalink / raw) To: Fu, Zhonghui Cc: Ulf Hansson, neilb, Jaehoon Chung, afenkart, joe, linux-mmc, linux-kernel On 21/09/15 08:29, Fu, Zhonghui wrote: > > > On 2015/8/24 15:07, Fu, Zhonghui wrote: >> >> On 2015/8/17 14:48, Adrian Hunter wrote: >>> On 17/08/15 06:26, Fu, Zhonghui wrote: >>>> Hi, >>>> >>>> Any comments are welcome. >>>> >>>> >>>> Thanks, >>>> Zhonghui >>>> >>>> On 2015/7/30 15:40, Fu, Zhonghui wrote: >>>>> Enable SDIO card and function device to suspend/resume asynchronously. >>>>> This can improve system suspend/resume speed. >>> For me, it needs more explanation. >>> >>> For example, why is this worth doing? Can you give an example where it does >>> significantly improve suspend/resume speed? Are there any cases where it >>> could be worse? >>> >>> Why is it safe? Presumably it is safe if there are no dependencies on the >>> device outside the device hierarchy. Is that so? Are there any other >>> potential pitfalls to enabling async_suspend? >> Now, PM core support asynchronous device suspend/resume mode. If one device has been set to support asynchronous PM mode, it's suspend/resume operation can be performed in a separate kernel thread and take advantage of multicore feature to improve overall system suspend/resume speed. The worst case is that all device suspend/resume threads will be scheduled to the same CPU, it hardly occur. >> >> PM core ensure all the suspend/resume dependency related to one device. Actually, async suspend/resume mode is one feature of PM core, every device subsystem may use it or not use it. Once one device subsystem choose to use this feature, its safety is up to PM core as long as device subsystem has initialized fully this device. > > The original suspend time is 1645ms and resume time is 940ms on ASUS T100TA > machine. After enabling "wiphy device", "SDIO device", "mmc host" and > "sdhci-acpi device" to suspend/resume asynchronously, the suspend time is > 1096ms and resume time is 908ms. The test environment is listed as follows: > > OS: Ubuntu 14.04 > Kernel: mainline v4.1 > Machine: ASUS T100TA(Baytrail-T platform) > Tool: analyze_suspend > “analyze_suspend.py –f –m freeze” to suspend system > Press power button to resume system > > I have resent this patch with updated commit message - "[PATCH v2] MMC/SDIO: > enable SDIO device to suspend/resume asynchronously". It is really cool that you tested this. Thank you! I am a bit baffled and bemused that you didn't put a summary of the testing and results in the commit message. Can you do that. As I wrote, we are assuming that there are no dependencies on the device outside the device hierarchy. That is a reasonable assumption for an SDIO controller because it doesn't provide resources for other devices to use, except for the card itself which is a child device, and therefore a dependency that PM core knows about. Does that make sense? If it does then shouldn't that explanation be added to the commit message too. i.e. this is why we think it is always going to work? > > > Thanks, > Zhonghui >> >> >> Thanks, >> Zhonghui >>>>> Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com> >>>>> --- >>>>> drivers/mmc/core/sdio.c | 4 ++++ >>>>> 1 files changed, 4 insertions(+), 0 deletions(-) >>>>> >>>>> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c >>>>> index b91abed..6719b77 100644 >>>>> --- a/drivers/mmc/core/sdio.c >>>>> +++ b/drivers/mmc/core/sdio.c >>>>> @@ -1106,6 +1106,8 @@ int mmc_attach_sdio(struct mmc_host *host) >>>>> pm_runtime_enable(&card->dev); >>>>> } >>>>> >>>>> + device_enable_async_suspend(&card->dev); >>>>> + >>>>> /* >>>>> * The number of functions on the card is encoded inside >>>>> * the ocr. >>>>> @@ -1126,6 +1128,8 @@ int mmc_attach_sdio(struct mmc_host *host) >>>>> */ >>>>> if (host->caps & MMC_CAP_POWER_OFF_CARD) >>>>> pm_runtime_enable(&card->sdio_func[i]->dev); >>>>> + >>>>> + device_enable_async_suspend(&card->sdio_func[i]->dev); >>>>> } >>>>> >>>>> /* >>>>> -- 1.7.1 >>>>> >>>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> Please read the FAQ at http://www.tux.org/lkml/ > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] MMC/SDIO: enable SDIO device to suspend/resume asynchronously 2015-09-21 8:15 ` Adrian Hunter @ 2015-09-21 8:41 ` Adrian Hunter 2015-11-15 14:02 ` Fu, Zhonghui 0 siblings, 1 reply; 7+ messages in thread From: Adrian Hunter @ 2015-09-21 8:41 UTC (permalink / raw) To: Fu, Zhonghui Cc: Ulf Hansson, neilb, Jaehoon Chung, afenkart, joe, linux-mmc, linux-kernel On 21/09/15 11:15, Adrian Hunter wrote: > On 21/09/15 08:29, Fu, Zhonghui wrote: >> >> >> On 2015/8/24 15:07, Fu, Zhonghui wrote: >>> >>> On 2015/8/17 14:48, Adrian Hunter wrote: >>>> On 17/08/15 06:26, Fu, Zhonghui wrote: >>>>> Hi, >>>>> >>>>> Any comments are welcome. >>>>> >>>>> >>>>> Thanks, >>>>> Zhonghui >>>>> >>>>> On 2015/7/30 15:40, Fu, Zhonghui wrote: >>>>>> Enable SDIO card and function device to suspend/resume asynchronously. >>>>>> This can improve system suspend/resume speed. >>>> For me, it needs more explanation. >>>> >>>> For example, why is this worth doing? Can you give an example where it does >>>> significantly improve suspend/resume speed? Are there any cases where it >>>> could be worse? >>>> >>>> Why is it safe? Presumably it is safe if there are no dependencies on the >>>> device outside the device hierarchy. Is that so? Are there any other >>>> potential pitfalls to enabling async_suspend? >>> Now, PM core support asynchronous device suspend/resume mode. If one device has been set to support asynchronous PM mode, it's suspend/resume operation can be performed in a separate kernel thread and take advantage of multicore feature to improve overall system suspend/resume speed. The worst case is that all device suspend/resume threads will be scheduled to the same CPU, it hardly occur. >>> >>> PM core ensure all the suspend/resume dependency related to one device. Actually, async suspend/resume mode is one feature of PM core, every device subsystem may use it or not use it. Once one device subsystem choose to use this feature, its safety is up to PM core as long as device subsystem has initialized fully this device. >> >> The original suspend time is 1645ms and resume time is 940ms on ASUS T100TA >> machine. After enabling "wiphy device", "SDIO device", "mmc host" and >> "sdhci-acpi device" to suspend/resume asynchronously, the suspend time is >> 1096ms and resume time is 908ms. The test environment is listed as follows: >> >> OS: Ubuntu 14.04 >> Kernel: mainline v4.1 >> Machine: ASUS T100TA(Baytrail-T platform) >> Tool: analyze_suspend >> “analyze_suspend.py –f –m freeze” to suspend system >> Press power button to resume system >> >> I have resent this patch with updated commit message - "[PATCH v2] MMC/SDIO: >> enable SDIO device to suspend/resume asynchronously". > > It is really cool that you tested this. Thank you! > > I am a bit baffled and bemused that you didn't put a summary of the testing > and results in the commit message. Can you do that. > > As I wrote, we are assuming that there are no dependencies on the device > outside the device hierarchy. That is a reasonable assumption for an SDIO > controller because it doesn't provide resources for other devices to use, > except for the card itself which is a child device, and therefore a > dependency that PM core knows about. > > Does that make sense? If it does then shouldn't that explanation be added > to the commit message too. i.e. this is why we think it is always going to > work? Just realized this patch is for the card, not the host controller, so those last 2 paragraphs don't apply. > >> >> >> Thanks, >> Zhonghui >>> >>> >>> Thanks, >>> Zhonghui >>>>>> Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com> >>>>>> --- >>>>>> drivers/mmc/core/sdio.c | 4 ++++ >>>>>> 1 files changed, 4 insertions(+), 0 deletions(-) >>>>>> >>>>>> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c >>>>>> index b91abed..6719b77 100644 >>>>>> --- a/drivers/mmc/core/sdio.c >>>>>> +++ b/drivers/mmc/core/sdio.c >>>>>> @@ -1106,6 +1106,8 @@ int mmc_attach_sdio(struct mmc_host *host) >>>>>> pm_runtime_enable(&card->dev); >>>>>> } >>>>>> >>>>>> + device_enable_async_suspend(&card->dev); >>>>>> + >>>>>> /* >>>>>> * The number of functions on the card is encoded inside >>>>>> * the ocr. >>>>>> @@ -1126,6 +1128,8 @@ int mmc_attach_sdio(struct mmc_host *host) >>>>>> */ >>>>>> if (host->caps & MMC_CAP_POWER_OFF_CARD) >>>>>> pm_runtime_enable(&card->sdio_func[i]->dev); >>>>>> + >>>>>> + device_enable_async_suspend(&card->sdio_func[i]->dev); >>>>>> } >>>>>> >>>>>> /* >>>>>> -- 1.7.1 >>>>>> >>>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>> Please read the FAQ at http://www.tux.org/lkml/ >> > > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Re: [PATCH] MMC/SDIO: enable SDIO device to suspend/resume asynchronously 2015-09-21 8:41 ` Adrian Hunter @ 2015-11-15 14:02 ` Fu, Zhonghui 0 siblings, 0 replies; 7+ messages in thread From: Fu, Zhonghui @ 2015-11-15 14:02 UTC (permalink / raw) To: Adrian Hunter Cc: Ulf Hansson, neilb, Jaehoon Chung, afenkart, joe, linux-mmc, linux-kernel On 9/21/2015 4:41 PM, Adrian Hunter wrote: > On 21/09/15 11:15, Adrian Hunter wrote: >> On 21/09/15 08:29, Fu, Zhonghui wrote: >>> >>> On 2015/8/24 15:07, Fu, Zhonghui wrote: >>>> On 2015/8/17 14:48, Adrian Hunter wrote: >>>>> On 17/08/15 06:26, Fu, Zhonghui wrote: >>>>>> Hi, >>>>>> >>>>>> Any comments are welcome. >>>>>> >>>>>> >>>>>> Thanks, >>>>>> Zhonghui >>>>>> >>>>>> On 2015/7/30 15:40, Fu, Zhonghui wrote: >>>>>>> Enable SDIO card and function device to suspend/resume asynchronously. >>>>>>> This can improve system suspend/resume speed. >>>>> For me, it needs more explanation. >>>>> >>>>> For example, why is this worth doing? Can you give an example where it does >>>>> significantly improve suspend/resume speed? Are there any cases where it >>>>> could be worse? >>>>> >>>>> Why is it safe? Presumably it is safe if there are no dependencies on the >>>>> device outside the device hierarchy. Is that so? Are there any other >>>>> potential pitfalls to enabling async_suspend? >>>> Now, PM core support asynchronous device suspend/resume mode. If one device has been set to support asynchronous PM mode, it's suspend/resume operation can be performed in a separate kernel thread and take advantage of multicore feature to improve overall system suspend/resume speed. The worst case is that all device suspend/resume threads will be scheduled to the same CPU, it hardly occur. >>>> >>>> PM core ensure all the suspend/resume dependency related to one device. Actually, async suspend/resume mode is one feature of PM core, every device subsystem may use it or not use it. Once one device subsystem choose to use this feature, its safety is up to PM core as long as device subsystem has initialized fully this device. >>> The original suspend time is 1645ms and resume time is 940ms on ASUS T100TA >>> machine. After enabling "wiphy device", "SDIO device", "mmc host" and >>> "sdhci-acpi device" to suspend/resume asynchronously, the suspend time is >>> 1096ms and resume time is 908ms. The test environment is listed as follows: >>> >>> OS: Ubuntu 14.04 >>> Kernel: mainline v4.1 >>> Machine: ASUS T100TA(Baytrail-T platform) >>> Tool: analyze_suspend >>> “analyze_suspend.py –f –m freeze” to suspend system >>> Press power button to resume system >>> >>> I have resent this patch with updated commit message - "[PATCH v2] MMC/SDIO: >>> enable SDIO device to suspend/resume asynchronously". >> It is really cool that you tested this. Thank you! >> >> I am a bit baffled and bemused that you didn't put a summary of the testing >> and results in the commit message. Can you do that. >> >> As I wrote, we are assuming that there are no dependencies on the device >> outside the device hierarchy. That is a reasonable assumption for an SDIO >> controller because it doesn't provide resources for other devices to use, >> except for the card itself which is a child device, and therefore a >> dependency that PM core knows about. >> >> Does that make sense? If it does then shouldn't that explanation be added >> to the commit message too. i.e. this is why we think it is always going to >> work? > Just realized this patch is for the card, not the host controller, so those > last 2 paragraphs don't apply. Sorry for replying this mail after long leave. Thanks for your comments. I have added the test result into commit message and sent the latest version of this patch: "[PATCH v3] MMC/SDIO: enable SDIO device to suspend/resume asynchronously" Thanks, Zhonghui > >>> >>> Thanks, >>> Zhonghui >>>> >>>> Thanks, >>>> Zhonghui >>>>>>> Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com> >>>>>>> --- >>>>>>> drivers/mmc/core/sdio.c | 4 ++++ >>>>>>> 1 files changed, 4 insertions(+), 0 deletions(-) >>>>>>> >>>>>>> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c >>>>>>> index b91abed..6719b77 100644 >>>>>>> --- a/drivers/mmc/core/sdio.c >>>>>>> +++ b/drivers/mmc/core/sdio.c >>>>>>> @@ -1106,6 +1106,8 @@ int mmc_attach_sdio(struct mmc_host *host) >>>>>>> pm_runtime_enable(&card->dev); >>>>>>> } >>>>>>> >>>>>>> + device_enable_async_suspend(&card->dev); >>>>>>> + >>>>>>> /* >>>>>>> * The number of functions on the card is encoded inside >>>>>>> * the ocr. >>>>>>> @@ -1126,6 +1128,8 @@ int mmc_attach_sdio(struct mmc_host *host) >>>>>>> */ >>>>>>> if (host->caps & MMC_CAP_POWER_OFF_CARD) >>>>>>> pm_runtime_enable(&card->sdio_func[i]->dev); >>>>>>> + >>>>>>> + device_enable_async_suspend(&card->sdio_func[i]->dev); >>>>>>> } >>>>>>> >>>>>>> /* >>>>>>> -- 1.7.1 >>>>>>> >>>>> -- >>>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >>>>> the body of a message to majordomo@vger.kernel.org >>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>>> Please read the FAQ at http://www.tux.org/lkml/ >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-11-15 14:03 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-07-30 7:40 [PATCH] MMC/SDIO: enable SDIO device to suspend/resume asynchronously Fu, Zhonghui 2015-08-17 3:26 ` Fu, Zhonghui 2015-08-17 6:48 ` Adrian Hunter 2015-08-24 7:07 ` Fu, Zhonghui [not found] ` <55FF95CA.4010108@linux.intel.com> 2015-09-21 8:15 ` Adrian Hunter 2015-09-21 8:41 ` Adrian Hunter 2015-11-15 14:02 ` Fu, Zhonghui
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).