linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Lutomirski <luto@kernel.org>
To: X86 ML <x86@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Brian Gerst <brgerst@gmail.com>,
	Dave Hansen <dave.hansen@intel.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Andy Lutomirski <luto@kernel.org>
Subject: [RFC 6/7] x86/asm: Remap the TSS into the cpu entry area
Date: Fri, 10 Nov 2017 20:05:25 -0800	[thread overview]
Message-ID: <5b424fefa9230917995d0584b40bc539a9bd9224.1510371795.git.luto@kernel.org> (raw)
In-Reply-To: <cover.1510371795.git.luto@kernel.org>
In-Reply-To: <cover.1510371795.git.luto@kernel.org>

This has a secondary purpose: it puts the entry stack into a region
with a well-controlled layout.  A subsequent patch will take
advantage of this to streamline the SYSCALL entry code to be able to
find it more easily.

XXX: This either needs to not happen on 32-bit or we need to fix the 32-bit
entry code.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
---
 arch/x86/include/asm/fixmap.h |  7 +++++++
 arch/x86/kernel/cpu/common.c  | 33 +++++++++++++++++++++++++++------
 arch/x86/power/cpu.c          | 11 ++++++-----
 3 files changed, 40 insertions(+), 11 deletions(-)

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index fbc9b7f4e35e..8a9ba5553cab 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -52,6 +52,13 @@ extern unsigned long __FIXADDR_TOP;
 struct cpu_entry_area
 {
 	char gdt[PAGE_SIZE];
+
+	/*
+	 * The gdt is just below cpu_tss and thus serves (on x86_64) as a
+	 * a read-only guard page for the SYSENTER stack at the bottom
+	 * of the TSS region.
+	 */
+	struct tss_struct tss;
 };
 
 #define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index ce3b3c79fc0c..fdf8108791ce 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -466,6 +466,16 @@ void load_percpu_segment(int cpu)
 	load_stack_canary_segment();
 }
 
+static void set_percpu_fixmap_pages(int fixmap_index, void *ptr, int pages,
+				    pgprot_t prot)
+{
+	int i;
+
+	for (i = 0; i < pages; i++)
+		__set_fixmap(fixmap_index - i,
+			     per_cpu_ptr_to_phys(ptr + i*PAGE_SIZE), prot);
+}
+
 /* Setup the fixmap mappings only once per-processor */
 static inline void setup_cpu_entry_area(int cpu)
 {
@@ -487,6 +497,12 @@ static inline void setup_cpu_entry_area(int cpu)
 #endif
 
 	__set_fixmap(get_cpu_entry_area_index(cpu, gdt), get_cpu_gdt_paddr(cpu), gdt_prot);
+
+	BUILD_BUG_ON(sizeof(struct tss_struct) % PAGE_SIZE != 0);
+	set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, tss),
+				&per_cpu(cpu_tss, cpu),
+				sizeof(struct tss_struct) / PAGE_SIZE,
+				PAGE_KERNEL);
 }
 
 /* Load the original GDT from the per-cpu structure */
@@ -1236,7 +1252,8 @@ void enable_sep_cpu(void)
 	wrmsr(MSR_IA32_SYSENTER_CS, tss->x86_tss.ss1, 0);
 
 	wrmsr(MSR_IA32_SYSENTER_ESP,
-	      (unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
+	      (unsigned long)&get_cpu_entry_area(cpu)->tss +
+	      offsetofend(struct tss_struct, SYSENTER_stack),
 	      0);
 
 	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
@@ -1349,6 +1366,8 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
 {
+	int cpu = smp_processor_id();
+
 	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
 	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
 
@@ -1362,7 +1381,7 @@ void syscall_init(void)
 	 */
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
 	wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
-		    (unsigned long)this_cpu_ptr(&cpu_tss) +
+		    (unsigned long)&get_cpu_entry_area(cpu)->tss +
 		    offsetofend(struct tss_struct, SYSENTER_stack));
 	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
 #else
@@ -1572,11 +1591,13 @@ void cpu_init(void)
 	initialize_tlbstate_and_flush();
 	enter_lazy_tlb(&init_mm, me);
 
+	setup_cpu_entry_area(cpu);
+
 	/*
 	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
 	 * task never enters user mode.
 	 */
-	set_tss_desc(cpu, &t->x86_tss);
+	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 	load_TR_desc();
 
 	load_mm_ldt(&init_mm);
@@ -1589,7 +1610,6 @@ void cpu_init(void)
 	if (is_uv_system())
 		uv_cpu_init();
 
-	setup_cpu_entry_area(cpu);
 	load_fixmap_gdt(cpu);
 }
 
@@ -1630,11 +1650,13 @@ void cpu_init(void)
 	initialize_tlbstate_and_flush();
 	enter_lazy_tlb(&init_mm, curr);
 
+	setup_cpu_entry_area(cpu);
+
 	/*
 	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
 	 * task never enters user mode.
 	 */
-	set_tss_desc(cpu, &t->x86_tss);
+	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 	load_TR_desc();
 
 	load_mm_ldt(&init_mm);
@@ -1651,7 +1673,6 @@ void cpu_init(void)
 
 	fpu__init_cpu();
 
-	setup_cpu_entry_area(cpu);
 	load_fixmap_gdt(cpu);
 }
 #endif
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 50593e138281..04d5157fe7f8 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -160,18 +160,19 @@ static void do_fpu_end(void)
 static void fix_processor_context(void)
 {
 	int cpu = smp_processor_id();
-	struct tss_struct *t = &per_cpu(cpu_tss, cpu);
 #ifdef CONFIG_X86_64
 	struct desc_struct *desc = get_cpu_gdt_rw(cpu);
 	tss_desc tss;
 #endif
 
 	/*
-	 * This just modifies memory; should not be necessary. But... This is
-	 * necessary, because 386 hardware has concept of busy TSS or some
-	 * similar stupidity.
+	 * We need to reload TR, which requires that we change the
+	 * GDT entry to indicate "available" first.
+	 *
+	 * XXX: This could probably all be replaced by a call to
+	 * force_reload_TR().
 	 */
-	set_tss_desc(cpu, &t->x86_tss);
+	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 
 #ifdef CONFIG_X86_64
 	memcpy(&tss, &desc[GDT_ENTRY_TSS], sizeof(tss_desc));
-- 
2.13.6

  parent reply	other threads:[~2017-11-11  4:05 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-11  4:05 [RFC 0/7] Prep code for better stack switching Andy Lutomirski
2017-11-11  4:05 ` [RFC 1/7] x86/asm/64: Allocate and enable the SYSENTER stack Andy Lutomirski
2017-11-13 19:07   ` Dave Hansen
2017-11-14  2:17     ` Andy Lutomirski
2017-11-14  7:15       ` Ingo Molnar
2017-11-11  4:05 ` [RFC 2/7] x86/gdt: Put per-cpu GDT remaps in ascending order Andy Lutomirski
2017-11-11  4:05 ` [RFC 3/7] x86/fixmap: Generalize the GDT fixmap mechanism Andy Lutomirski
2017-11-11  4:05 ` [RFC 4/7] x86/asm: Fix assumptions that the HW TSS is at the beginning of cpu_tss Andy Lutomirski
2017-11-13 17:01   ` Dave Hansen
2017-11-26 13:48     ` [PATCH v2] x86/entry: " Ingo Molnar
2017-11-26 15:41       ` Andy Lutomirski
2017-11-26 15:58         ` Ingo Molnar
2017-11-26 16:00           ` Ingo Molnar
2017-11-26 16:05             ` Andy Lutomirski
2017-11-26 16:43               ` Ingo Molnar
2017-11-11  4:05 ` [RFC 5/7] x86/asm: Rearrange struct cpu_tss to enlarge SYSENTER_stack and fix alignment Andy Lutomirski
2017-11-11  4:11   ` Andy Lutomirski
2017-11-13 19:19   ` Dave Hansen
2017-11-11  4:05 ` Andy Lutomirski [this message]
2017-11-13 19:22   ` [RFC 6/7] x86/asm: Remap the TSS into the cpu entry area Dave Hansen
2017-11-13 19:36     ` Linus Torvalds
2017-11-14  2:25       ` Andy Lutomirski
2017-11-14  2:28         ` Linus Torvalds
2017-11-14  2:30           ` Andy Lutomirski
2017-11-14  2:27     ` Andy Lutomirski
2017-11-11  4:05 ` [RFC 7/7] x86/unwind/64: Add support for the SYSENTER stack Andy Lutomirski
2017-11-13 22:46   ` Josh Poimboeuf
2017-11-14  2:13     ` Andy Lutomirski
2017-11-11 10:58 ` [RFC 0/7] Prep code for better stack switching Borislav Petkov
2017-11-12  2:59   ` Andy Lutomirski
2017-11-12  4:25     ` Andy Lutomirski
2017-11-13  4:37       ` Andy Lutomirski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5b424fefa9230917995d0584b40bc539a9bd9224.1510371795.git.luto@kernel.org \
    --to=luto@kernel.org \
    --cc=bpetkov@suse.de \
    --cc=brgerst@gmail.com \
    --cc=dave.hansen@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).