[PATCH 00/10] Handle return value of platform_get_*

[PATCH 00/10] Handle return value of platform_get_*

[Arvind Yadav]

 - The platform_get_*_*() function returns negative if an error occurs.
   zero or positive number on success. platform_get_irq_byname() error
   checking for zero is not correct.
 - The change is to call free_netdev(), If of_match_node() will fail.
 - Handle return value of platform_get_resource()

Arvind Yadav (10):
  [PATCH 01/10] net: bcmgenet: Fix platform_get_irq's error checking
  [PATCH 02/10] net: bcmgenet: free netdev on of_match_node() error
  [PATCH 03/10] net: ezchip: nps_enet: Fix platform_get_irq's error checking
  [PATCH 04/10] can: xilinx: Handle return value of platform_get_irq
  [PATCH 05/10] net: ethernet: i825xx: Fix platform_get_irq's error checking
  [PATCH 06/10] net: ethernet: natsemi: Handle return value of platform_get_irq
  [PATCH 07/10] net: ethernet: smsc: Handle return value of platform_get_irq
  [PATCH 08/10] net: fjes: Handle return value of platform_get_irq and platform_get_resource
  [PATCH 09/10] net: ethernet: korina: Handle return value of platform_get_irq_byname
  [PATCH 10/10] net: ethernet: cpmac: Handle return value of platform_get_irq_byname

 drivers/net/can/xilinx_can.c                   |  4 ++++
 drivers/net/ethernet/broadcom/genet/bcmgenet.c |  8 +++++---
 drivers/net/ethernet/ezchip/nps_enet.c         |  7 +++----
 drivers/net/ethernet/i825xx/sni_82596.c        |  3 ++-
 drivers/net/ethernet/korina.c                  |  9 +++++++++
 drivers/net/ethernet/natsemi/jazzsonic.c       |  5 +++++
 drivers/net/ethernet/smsc/smc911x.c            |  5 +++++
 drivers/net/ethernet/ti/cpmac.c                |  4 ++++
 drivers/net/fjes/fjes_main.c                   | 10 ++++++++++
 9 files changed, 47 insertions(+), 8 deletions(-)

-- 
2.7.4

[PATCH 01/10] net: bcmgenet: Fix platform_get_irq's error checking

[Arvind Yadav]

The platform_get_irq() function returns negative if an error occurs.
zero or positive number on success. platform_get_irq() error checking
for zero is not correct.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 24b4f4c..e2f1268 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3371,7 +3371,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	priv->irq0 = platform_get_irq(pdev, 0);
 	priv->irq1 = platform_get_irq(pdev, 1);
 	priv->wol_irq = platform_get_irq(pdev, 2);
-	if (!priv->irq0 || !priv->irq1) {
+	if (priv->irq0 <= 0 || priv->irq1 <= 0 || priv->wol_irq <= 0) {
 		dev_err(&pdev->dev, "can't find IRQs\n");
 		err = -EINVAL;
 		goto err;
-- 
2.7.4

[PATCH 02/10] net: bcmgenet: free netdev on of_match_node() error

[Arvind Yadav]

The change is to call free_netdev(), If of_match_node() will fail.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index e2f1268..e0a8f79 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3363,8 +3363,10 @@ static int bcmgenet_probe(struct platform_device *pdev)
 
 	if (dn) {
 		of_id = of_match_node(bcmgenet_match, dn);
-		if (!of_id)
-			return -EINVAL;
+		if (!of_id) {
+			err = -EINVAL;
+			goto err;
+		}
 	}
 
 	priv = netdev_priv(dev);
-- 
2.7.4

[PATCH 03/10] net: ezchip: nps_enet: Fix platform_get_irq's error checking

[Arvind Yadav]

The platform_get_irq() function returns negative if an error occurs.
zero or positive number on success. platform_get_irq() error checking
for zero is not correct. And remove unnecessary check for free_netdev().

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/ethernet/ezchip/nps_enet.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
index 659f1ad..82dc6d0 100644
--- a/drivers/net/ethernet/ezchip/nps_enet.c
+++ b/drivers/net/ethernet/ezchip/nps_enet.c
@@ -623,9 +623,9 @@ static s32 nps_enet_probe(struct platform_device *pdev)
 
 	/* Get IRQ number */
 	priv->irq = platform_get_irq(pdev, 0);
-	if (!priv->irq) {
+	if (priv->irq <= 0) {
 		dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
-		err = -ENODEV;
+		err = priv->irq ? priv->irq : -ENODEV;
 		goto out_netdev;
 	}
 
@@ -646,8 +646,7 @@ static s32 nps_enet_probe(struct platform_device *pdev)
 out_netif_api:
 	netif_napi_del(&priv->napi);
 out_netdev:
-	if (err)
-		free_netdev(ndev);
+	free_netdev(ndev);
 
 	return err;
 }
-- 
2.7.4

[PATCH 04/10] can: xilinx: Handle return value of platform_get_irq

[Arvind Yadav]

platform_get_irq() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/can/xilinx_can.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 89aec07..e36e2a2 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1111,6 +1111,10 @@ static int xcan_probe(struct platform_device *pdev)
 
 	/* Get IRQ for the device */
 	ndev->irq = platform_get_irq(pdev, 0);
+	if (ndev->irq <= 0) {
+		ret = ndev->irq ? ndev->irq : -ENODEV;
+		goto err_free;
+	}
 	ndev->flags |= IFF_ECHO;	/* We support local echo */
 
 	platform_set_drvdata(pdev, ndev);
-- 
2.7.4

[PATCH 05/10] net: ethernet: i825xx: Fix platform_get_irq's error checking

[Arvind Yadav]

The platform_get_irq() function returns negative if an error occurs.
zero or positive number on success. platform_get_irq() error checking
for zero is not correct.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/ethernet/i825xx/sni_82596.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/i825xx/sni_82596.c b/drivers/net/ethernet/i825xx/sni_82596.c
index b2c04a7..a6d56f5 100644
--- a/drivers/net/ethernet/i825xx/sni_82596.c
+++ b/drivers/net/ethernet/i825xx/sni_82596.c
@@ -120,9 +120,10 @@ static int sni_82596_probe(struct platform_device *dev)
 	netdevice->dev_addr[5] = readb(eth_addr + 0x06);
 	iounmap(eth_addr);
 
-	if (!netdevice->irq) {
+	if (netdevice->irq <= 0) {
 		printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
 			__FILE__, netdevice->base_addr);
+		retval = netdevice->irq ? netdevice->irq : -ENODEV;
 		goto probe_failed;
 	}
 
-- 
2.7.4

[PATCH 06/10] net: ethernet: natsemi: Handle return value of platform_get_irq

[Arvind Yadav]

platform_get_irq() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/ethernet/natsemi/jazzsonic.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
index d5b2888..3cf0856 100644
--- a/drivers/net/ethernet/natsemi/jazzsonic.c
+++ b/drivers/net/ethernet/natsemi/jazzsonic.c
@@ -242,6 +242,11 @@ static int jazz_sonic_probe(struct platform_device *pdev)
 
 	dev->base_addr = res->start;
 	dev->irq = platform_get_irq(pdev, 0);
+	if (dev->irq <= 0) {
+		err = dev->irq ? dev->irq : -ENODEV;
+		goto out;
+	}
+
 	err = sonic_probe1(dev);
 	if (err)
 		goto out;
-- 
2.7.4

[PATCH 07/10] net: ethernet: smsc: Handle return value of platform_get_irq

[Arvind Yadav]

platform_get_irq() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/ethernet/smsc/smc911x.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index 0515744..a1cf18c 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -2088,6 +2088,11 @@ static int smc911x_drv_probe(struct platform_device *pdev)
 
 	ndev->dma = (unsigned char)-1;
 	ndev->irq = platform_get_irq(pdev, 0);
+	if (ndev->irq <= 0) {
+		ret = ndev->irq ? ndev->irq : -ENODEV;
+		goto release_both;
+	}
+
 	lp = netdev_priv(ndev);
 	lp->netdev = ndev;
 #ifdef SMC_DYNAMIC_BUS_CONFIG
-- 
2.7.4

[PATCH 08/10] net: fjes: Handle return value of platform_get_irq and platform_get_resource

[Arvind Yadav]

platform_get_irq() and platform_get_resource() can fail here and
we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/fjes/fjes_main.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c
index 750954b..540dd51 100644
--- a/drivers/net/fjes/fjes_main.c
+++ b/drivers/net/fjes/fjes_main.c
@@ -1265,9 +1265,19 @@ static int fjes_probe(struct platform_device *plat_dev)
 	adapter->interrupt_watch_enable = false;
 
 	res = platform_get_resource(plat_dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -EINVAL;
+		goto err_free_netdev;
+	}
+
 	hw->hw_res.start = res->start;
 	hw->hw_res.size = resource_size(res);
 	hw->hw_res.irq = platform_get_irq(plat_dev, 0);
+	if (hw->hw_res.irq <= 0) {
+		err = hw->hw_res.irq ? hw->hw_res.irq : -ENODEV;
+		goto err_free_netdev;
+	}
+
 	err = fjes_hw_init(&adapter->hw);
 	if (err)
 		goto err_free_netdev;
-- 
2.7.4

[PATCH 09/10] net: ethernet: korina: Handle return value of platform_get_irq_byname

[Arvind Yadav]

platform_get_irq_byname() can fail here and we must check its return
value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/ethernet/korina.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index ae195f8..e778504 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -1039,7 +1039,16 @@ static int korina_probe(struct platform_device *pdev)
 	memcpy(dev->dev_addr, bif->mac, ETH_ALEN);
 
 	lp->rx_irq = platform_get_irq_byname(pdev, "korina_rx");
+	if (lp->rx_irq < 0) {
+		rc = lp->rx_irq;
+		goto probe_err_out;
+	}
+
 	lp->tx_irq = platform_get_irq_byname(pdev, "korina_tx");
+	if (lp->tx_irq < 0) {
+		rc = lp->tx_irq;
+		goto probe_err_out;
+	}
 
 	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_regs");
 	dev->base_addr = r->start;
-- 
2.7.4

[PATCH 10/10] net: ethernet: cpmac: Handle return value of platform_get_irq_byname

[Arvind Yadav]

platform_get_irq_byname() can fail here and we must check its return
value

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/net/ethernet/ti/cpmac.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpmac.c b/drivers/net/ethernet/ti/cpmac.c
index 9b8a30b..f3acfc0 100644
--- a/drivers/net/ethernet/ti/cpmac.c
+++ b/drivers/net/ethernet/ti/cpmac.c
@@ -1124,6 +1124,10 @@ static int cpmac_probe(struct platform_device *pdev)
 	}
 
 	dev->irq = platform_get_irq_byname(pdev, "irq");
+	if (dev->irq < 0) {
+		rc = dev->irq;
+		goto fail;
+	}
 
 	dev->netdev_ops = &cpmac_netdev_ops;
 	dev->ethtool_ops = &cpmac_ethtool_ops;
-- 
2.7.4

Re: [PATCH 08/10] net: fjes: Handle return value of platform_get_irq and platform_get_resource

[Sergei Shtylyov]

Hello!

On 12/02/2017 10:26 PM, Arvind Yadav wrote:

> platform_get_irq() and platform_get_resource() can fail here and
> we must check its return value.
> 
> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
> ---
>   drivers/net/fjes/fjes_main.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c
> index 750954b..540dd51 100644
> --- a/drivers/net/fjes/fjes_main.c
> +++ b/drivers/net/fjes/fjes_main.c
> @@ -1265,9 +1265,19 @@ static int fjes_probe(struct platform_device *plat_dev)
>   	adapter->interrupt_watch_enable = false;
>   
>   	res = platform_get_resource(plat_dev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		err = -EINVAL;
> +		goto err_free_netdev;
> +	}
> +
>   	hw->hw_res.start = res->start;
>   	hw->hw_res.size = resource_size(res);
>   	hw->hw_res.irq = platform_get_irq(plat_dev, 0);
> +	if (hw->hw_res.irq <= 0) {

    This function no longer returns 0 on error, no need to check for <= 0.

> +		err = hw->hw_res.irq ? hw->hw_res.irq : -ENODEV;
> +		goto err_free_netdev;

    gcc allows a shorter way to write that.

		err = hw->hw_res.irq ?: -ENODEV;

> +	}
> +
>   	err = fjes_hw_init(&adapter->hw);
>   	if (err)
>   		goto err_free_netdev;

MBR, Sergei

Re: [PATCH 07/10] net: ethernet: smsc: Handle return value of platform_get_irq

[Sergei Shtylyov]

On 12/02/2017 10:26 PM, Arvind Yadav wrote:

> platform_get_irq() can fail here and we must check its return value.
> 
> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
> ---
>   drivers/net/ethernet/smsc/smc911x.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
> index 0515744..a1cf18c 100644
> --- a/drivers/net/ethernet/smsc/smc911x.c
> +++ b/drivers/net/ethernet/smsc/smc911x.c
> @@ -2088,6 +2088,11 @@ static int smc911x_drv_probe(struct platform_device *pdev)
>   
>   	ndev->dma = (unsigned char)-1;
>   	ndev->irq = platform_get_irq(pdev, 0);
> +	if (ndev->irq <= 0) {
> +		ret = ndev->irq ? ndev->irq : -ENODEV;

    Same comments as the next patch...

> +		goto release_both;
> +	}
> +
>   	lp = netdev_priv(ndev);
>   	lp->netdev = ndev;
>   #ifdef SMC_DYNAMIC_BUS_CONFIG

MBR, Sergei

Re: [PATCH 05/10] net: ethernet: i825xx: Fix platform_get_irq's error checking

[Sergei Shtylyov]

Hello.

On 12/02/2017 10:26 PM, Arvind Yadav wrote:

> The platform_get_irq() function returns negative if an error occurs.
> zero or positive number on success. platform_get_irq() error checking
> for zero is not correct.

    The why you consider returning 0 a sign of failure?

> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
> ---
>   drivers/net/ethernet/i825xx/sni_82596.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/i825xx/sni_82596.c b/drivers/net/ethernet/i825xx/sni_82596.c
> index b2c04a7..a6d56f5 100644
> --- a/drivers/net/ethernet/i825xx/sni_82596.c
> +++ b/drivers/net/ethernet/i825xx/sni_82596.c
> @@ -120,9 +120,10 @@ static int sni_82596_probe(struct platform_device *dev)
>   	netdevice->dev_addr[5] = readb(eth_addr + 0x06);
>   	iounmap(eth_addr);
>   
> -	if (!netdevice->irq) {
> +	if (netdevice->irq <= 0) {
>   		printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
>   			__FILE__, netdevice->base_addr);
> +		retval = netdevice->irq ? netdevice->irq : -ENODEV;
>   		goto probe_failed;
>   	}
>   

MBR, Sergei

Re: [PATCH 05/10] net: ethernet: i825xx: Fix platform_get_irq's error checking

[arvindY]

Hi Sergei,

On Sunday 03 December 2017 01:38 AM, Sergei Shtylyov wrote:
> Hello.
>
> On 12/02/2017 10:26 PM, Arvind Yadav wrote:
>
>> The platform_get_irq() function returns negative if an error occurs.
>> zero or positive number on success. platform_get_irq() error checking
>> for zero is not correct.
>
>    The why you consider returning 0 a sign of failure?
Here, Returning 0 is a problem. Because IRQ0 is always a problem.
This function is for getting an IRQ for a device. So we should check for
0 also.
>
>> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
>> ---
>>   drivers/net/ethernet/i825xx/sni_82596.c | 3 ++-
>>   1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/i825xx/sni_82596.c 
>> b/drivers/net/ethernet/i825xx/sni_82596.c
>> index b2c04a7..a6d56f5 100644
>> --- a/drivers/net/ethernet/i825xx/sni_82596.c
>> +++ b/drivers/net/ethernet/i825xx/sni_82596.c
>> @@ -120,9 +120,10 @@ static int sni_82596_probe(struct 
>> platform_device *dev)
>>       netdevice->dev_addr[5] = readb(eth_addr + 0x06);
>>       iounmap(eth_addr);
>>   -    if (!netdevice->irq) {
>> +    if (netdevice->irq <= 0) {
>>           printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
>>               __FILE__, netdevice->base_addr);
>> +        retval = netdevice->irq ? netdevice->irq : -ENODEV;
>>           goto probe_failed;
>>       }
>
> MBR, Sergei
~arvind

Re: [PATCH 08/10] net: fjes: Handle return value of platform_get_irq and platform_get_resource

[arvindY]

Hi Sergei,

On Sunday 03 December 2017 01:36 AM, Sergei Shtylyov wrote:
> Hello!
>
> On 12/02/2017 10:26 PM, Arvind Yadav wrote:
>
>> platform_get_irq() and platform_get_resource() can fail here and
>> we must check its return value.
>>
>> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
>> ---
>>   drivers/net/fjes/fjes_main.c | 10 ++++++++++
>>   1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c
>> index 750954b..540dd51 100644
>> --- a/drivers/net/fjes/fjes_main.c
>> +++ b/drivers/net/fjes/fjes_main.c
>> @@ -1265,9 +1265,19 @@ static int fjes_probe(struct platform_device 
>> *plat_dev)
>>       adapter->interrupt_watch_enable = false;
>>         res = platform_get_resource(plat_dev, IORESOURCE_MEM, 0);
>> +    if (!res) {
>> +        err = -EINVAL;
>> +        goto err_free_netdev;
>> +    }
>> +
>>       hw->hw_res.start = res->start;
>>       hw->hw_res.size = resource_size(res);
>>       hw->hw_res.irq = platform_get_irq(plat_dev, 0);
>> +    if (hw->hw_res.irq <= 0) {
>
>    This function no longer returns 0 on error, no need to check for <= 0.
>
>> +        err = hw->hw_res.irq ? hw->hw_res.irq : -ENODEV;
>> +        goto err_free_netdev;
>
>    gcc allows a shorter way to write that.
>
>         err = hw->hw_res.irq ?: -ENODEV;
Yes, you are right, But first is more readable. That's why I have used.
>
>> +    }
>> +
>>       err = fjes_hw_init(&adapter->hw);
>>       if (err)
>>           goto err_free_netdev;
>
> MBR, Sergei
Thanks,
~arvind

Re: [PATCH 03/10] net: ezchip: nps_enet: Fix platform_get_irq's error checking

[David Miller]

From: Arvind Yadav <arvind.yadav.cs@gmail.com>
Date: Sun,  3 Dec 2017 00:56:15 +0530

> The platform_get_irq() function returns negative if an error occurs.
> zero or positive number on success. platform_get_irq() error checking
> for zero is not correct. And remove unnecessary check for free_netdev().
> 
> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
> ---
>  drivers/net/ethernet/ezchip/nps_enet.c | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
> index 659f1ad..82dc6d0 100644
> --- a/drivers/net/ethernet/ezchip/nps_enet.c
> +++ b/drivers/net/ethernet/ezchip/nps_enet.c
> @@ -623,9 +623,9 @@ static s32 nps_enet_probe(struct platform_device *pdev)
>  
>  	/* Get IRQ number */
>  	priv->irq = platform_get_irq(pdev, 0);
> -	if (!priv->irq) {
> +	if (priv->irq <= 0) {
>  		dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
> -		err = -ENODEV;
> +		err = priv->irq ? priv->irq : -ENODEV;

If platform_get_irq() returns "zero or positive number on success" then this
test is wrong and should be "if (priv->irq < 0)"

Also, this series is a mix of different kinds of changes.

Please separate out the platform IRQ error checking and just submit exactly
those changes as a patch series.

The other bug fixes should be submitted outside of those changes since they
are unrelated.

Re: [PATCH 03/10] net: ezchip: nps_enet: Fix platform_get_irq's error checking

[Russell King - ARM Linux]

On Mon, Dec 04, 2017 at 11:20:49AM -0500, David Miller wrote:
> From: Arvind Yadav <arvind.yadav.cs@gmail.com>
> Date: Sun,  3 Dec 2017 00:56:15 +0530
> 
> > The platform_get_irq() function returns negative if an error occurs.
> > zero or positive number on success. platform_get_irq() error checking
> > for zero is not correct. And remove unnecessary check for free_netdev().
> > 
> > Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
> > ---
> >  drivers/net/ethernet/ezchip/nps_enet.c | 7 +++----
> >  1 file changed, 3 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
> > index 659f1ad..82dc6d0 100644
> > --- a/drivers/net/ethernet/ezchip/nps_enet.c
> > +++ b/drivers/net/ethernet/ezchip/nps_enet.c
> > @@ -623,9 +623,9 @@ static s32 nps_enet_probe(struct platform_device *pdev)
> >  
> >  	/* Get IRQ number */
> >  	priv->irq = platform_get_irq(pdev, 0);
> > -	if (!priv->irq) {
> > +	if (priv->irq <= 0) {
> >  		dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
> > -		err = -ENODEV;
> > +		err = priv->irq ? priv->irq : -ENODEV;
> 
> If platform_get_irq() returns "zero or positive number on success" then this
> test is wrong and should be "if (priv->irq < 0)"
> 
> Also, this series is a mix of different kinds of changes.
> 
> Please separate out the platform IRQ error checking and just submit exactly
> those changes as a patch series.
> 
> The other bug fixes should be submitted outside of those changes since they
> are unrelated.

The issue of whether IRQ 0 is valid or not has been covered several times
by Linus, and the result is that it is deemed by Linus that IRQ 0 is not
a valid interrupt.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up

Re: [PATCH 03/10] net: ezchip: nps_enet: Fix platform_get_irq's error checking

[David Miller]

From: Russell King - ARM Linux <linux@armlinux.org.uk>
Date: Mon, 4 Dec 2017 16:24:47 +0000

> On Mon, Dec 04, 2017 at 11:20:49AM -0500, David Miller wrote:
>> From: Arvind Yadav <arvind.yadav.cs@gmail.com>
>> Date: Sun,  3 Dec 2017 00:56:15 +0530
>> 
>> > The platform_get_irq() function returns negative if an error occurs.
>> > zero or positive number on success. platform_get_irq() error checking
>> > for zero is not correct. And remove unnecessary check for free_netdev().
>> > 
>> > Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
>> > ---
>> >  drivers/net/ethernet/ezchip/nps_enet.c | 7 +++----
>> >  1 file changed, 3 insertions(+), 4 deletions(-)
>> > 
>> > diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
>> > index 659f1ad..82dc6d0 100644
>> > --- a/drivers/net/ethernet/ezchip/nps_enet.c
>> > +++ b/drivers/net/ethernet/ezchip/nps_enet.c
>> > @@ -623,9 +623,9 @@ static s32 nps_enet_probe(struct platform_device *pdev)
>> >  
>> >  	/* Get IRQ number */
>> >  	priv->irq = platform_get_irq(pdev, 0);
>> > -	if (!priv->irq) {
>> > +	if (priv->irq <= 0) {
>> >  		dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
>> > -		err = -ENODEV;
>> > +		err = priv->irq ? priv->irq : -ENODEV;
>> 
>> If platform_get_irq() returns "zero or positive number on success" then this
>> test is wrong and should be "if (priv->irq < 0)"
>> 
>> Also, this series is a mix of different kinds of changes.
>> 
>> Please separate out the platform IRQ error checking and just submit exactly
>> those changes as a patch series.
>> 
>> The other bug fixes should be submitted outside of those changes since they
>> are unrelated.
> 
> The issue of whether IRQ 0 is valid or not has been covered several times
> by Linus, and the result is that it is deemed by Linus that IRQ 0 is not
> a valid interrupt.

Then either platform_get_irq() as defined or this commit message (or both)
are wrong.

Re: [PATCH 03/10] net: ezchip: nps_enet: Fix platform_get_irq's error checking

[Russell King - ARM Linux]

On Mon, Dec 04, 2017 at 11:34:48AM -0500, David Miller wrote:
> From: Russell King - ARM Linux <linux@armlinux.org.uk>
> Date: Mon, 4 Dec 2017 16:24:47 +0000
> 
> > On Mon, Dec 04, 2017 at 11:20:49AM -0500, David Miller wrote:
> >> From: Arvind Yadav <arvind.yadav.cs@gmail.com>
> >> Date: Sun,  3 Dec 2017 00:56:15 +0530
> >> 
> >> > The platform_get_irq() function returns negative if an error occurs.
> >> > zero or positive number on success. platform_get_irq() error checking
> >> > for zero is not correct. And remove unnecessary check for free_netdev().
> >> > 
> >> > Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
> >> > ---
> >> >  drivers/net/ethernet/ezchip/nps_enet.c | 7 +++----
> >> >  1 file changed, 3 insertions(+), 4 deletions(-)
> >> > 
> >> > diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
> >> > index 659f1ad..82dc6d0 100644
> >> > --- a/drivers/net/ethernet/ezchip/nps_enet.c
> >> > +++ b/drivers/net/ethernet/ezchip/nps_enet.c
> >> > @@ -623,9 +623,9 @@ static s32 nps_enet_probe(struct platform_device *pdev)
> >> >  
> >> >  	/* Get IRQ number */
> >> >  	priv->irq = platform_get_irq(pdev, 0);
> >> > -	if (!priv->irq) {
> >> > +	if (priv->irq <= 0) {
> >> >  		dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
> >> > -		err = -ENODEV;
> >> > +		err = priv->irq ? priv->irq : -ENODEV;
> >> 
> >> If platform_get_irq() returns "zero or positive number on success" then this
> >> test is wrong and should be "if (priv->irq < 0)"
> >> 
> >> Also, this series is a mix of different kinds of changes.
> >> 
> >> Please separate out the platform IRQ error checking and just submit exactly
> >> those changes as a patch series.
> >> 
> >> The other bug fixes should be submitted outside of those changes since they
> >> are unrelated.
> > 
> > The issue of whether IRQ 0 is valid or not has been covered several times
> > by Linus, and the result is that it is deemed by Linus that IRQ 0 is not
> > a valid interrupt.
> 
> Then either platform_get_irq() as defined or this commit message (or both)
> are wrong.

Indeed, the commit message is wrong, and that's already been pointed out
in previous patch sets.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up

Re: [PATCH 03/10] net: ezchip: nps_enet: Fix platform_get_irq's error checking

[arvindY]

On Monday 04 December 2017 10:12 PM, Russell King - ARM Linux wrote:
> On Mon, Dec 04, 2017 at 11:34:48AM -0500, David Miller wrote:
>> From: Russell King - ARM Linux <linux@armlinux.org.uk>
>> Date: Mon, 4 Dec 2017 16:24:47 +0000
>>
>>> On Mon, Dec 04, 2017 at 11:20:49AM -0500, David Miller wrote:
>>>> From: Arvind Yadav <arvind.yadav.cs@gmail.com>
>>>> Date: Sun,  3 Dec 2017 00:56:15 +0530
>>>>
>>>>> The platform_get_irq() function returns negative if an error occurs.
>>>>> zero or positive number on success. platform_get_irq() error checking
>>>>> for zero is not correct. And remove unnecessary check for free_netdev().
>>>>>
>>>>> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
>>>>> ---
>>>>>   drivers/net/ethernet/ezchip/nps_enet.c | 7 +++----
>>>>>   1 file changed, 3 insertions(+), 4 deletions(-)
>>>>>
>>>>> diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
>>>>> index 659f1ad..82dc6d0 100644
>>>>> --- a/drivers/net/ethernet/ezchip/nps_enet.c
>>>>> +++ b/drivers/net/ethernet/ezchip/nps_enet.c
>>>>> @@ -623,9 +623,9 @@ static s32 nps_enet_probe(struct platform_device *pdev)
>>>>>   
>>>>>   	/* Get IRQ number */
>>>>>   	priv->irq = platform_get_irq(pdev, 0);
>>>>> -	if (!priv->irq) {
>>>>> +	if (priv->irq <= 0) {
>>>>>   		dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
>>>>> -		err = -ENODEV;
>>>>> +		err = priv->irq ? priv->irq : -ENODEV;
>>>> If platform_get_irq() returns "zero or positive number on success" then this
>>>> test is wrong and should be "if (priv->irq < 0)"
>>>>
>>>> Also, this series is a mix of different kinds of changes.
>>>>
>>>> Please separate out the platform IRQ error checking and just submit exactly
>>>> those changes as a patch series.
>>>>
>>>> The other bug fixes should be submitted outside of those changes since they
>>>> are unrelated.
>>> The issue of whether IRQ 0 is valid or not has been covered several times
>>> by Linus, and the result is that it is deemed by Linus that IRQ 0 is not
>>> a valid interrupt.
>> Then either platform_get_irq() as defined or this commit message (or both)
>> are wrong.
> Indeed, the commit message is wrong, and that's already been pointed out
> in previous patch sets.
>
I will change commit message.  Commit message will be
  " The platform_get_irq() function returns negative if an
error occurs, Zero if No irq found and positive number
on get irq successful. platform_get_irq() error checking for
only zero is not correct."

Re: [PATCH 02/10] net: bcmgenet: free netdev on of_match_node() error

[Doug Berger]

On 12/02/2017 11:26 AM, Arvind Yadav wrote:
> The change is to call free_netdev(), If of_match_node() will fail.
> 
> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
> ---
>  drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> index e2f1268..e0a8f79 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> @@ -3363,8 +3363,10 @@ static int bcmgenet_probe(struct platform_device *pdev)
>  
>  	if (dn) {
>  		of_id = of_match_node(bcmgenet_match, dn);
> -		if (!of_id)
> -			return -EINVAL;
> +		if (!of_id) {
> +			err = -EINVAL;
> +			goto err;
> +		}
>  	}
>  
>  	priv = netdev_priv(dev);
> 

I agree with the fix if you want to resubmit separate from this series
and please include a "fixes" tag.

Thanks,
    Doug