linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: "Michael S. Tsirkin" <mst@redhat.com>, linux-kernel@vger.kernel.org
Cc: "Eugenio Pérez" <eperezma@redhat.com>,
	kvm@vger.kernel.org, virtualization@lists.linux-foundation.org,
	netdev@vger.kernel.org
Subject: Re: [PATCH RFC 07/13] vhost: format-independent API for used buffers
Date: Wed, 3 Jun 2020 15:58:26 +0800	[thread overview]
Message-ID: <6d98f2cc-2084-cde0-c938-4ca01692adf9@redhat.com> (raw)
In-Reply-To: <20200602130543.578420-8-mst@redhat.com>


On 2020/6/2 下午9:06, Michael S. Tsirkin wrote:
> Add a new API that doesn't assume used ring, heads, etc.
> For now, we keep the old APIs around to make it easier
> to convert drivers.
>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> ---
>   drivers/vhost/vhost.c | 52 ++++++++++++++++++++++++++++++++++---------
>   drivers/vhost/vhost.h | 17 +++++++++++++-
>   2 files changed, 58 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> index b4a6e44d56a8..be822f0c9428 100644
> --- a/drivers/vhost/vhost.c
> +++ b/drivers/vhost/vhost.c
> @@ -2292,13 +2292,12 @@ static int fetch_descs(struct vhost_virtqueue *vq)
>    * number of output then some number of input descriptors, it's actually two
>    * iovecs, but we pack them into one and note how many of each there were.
>    *
> - * This function returns the descriptor number found, or vq->num (which is
> - * never a valid descriptor number) if none was found.  A negative code is
> - * returned on error. */
> -int vhost_get_vq_desc(struct vhost_virtqueue *vq,
> -		      struct iovec iov[], unsigned int iov_size,
> -		      unsigned int *out_num, unsigned int *in_num,
> -		      struct vhost_log *log, unsigned int *log_num)
> + * This function returns a value > 0 if a descriptor was found, or 0 if none were found.
> + * A negative code is returned on error. */
> +int vhost_get_avail_buf(struct vhost_virtqueue *vq, struct vhost_buf *buf,
> +			struct iovec iov[], unsigned int iov_size,
> +			unsigned int *out_num, unsigned int *in_num,
> +			struct vhost_log *log, unsigned int *log_num)
>   {
>   	int ret = fetch_descs(vq);
>   	int i;
> @@ -2311,6 +2310,8 @@ int vhost_get_vq_desc(struct vhost_virtqueue *vq,
>   	*out_num = *in_num = 0;
>   	if (unlikely(log))
>   		*log_num = 0;
> +	buf->in_len = buf->out_len = 0;
> +	buf->descs = 0;
>   
>   	for (i = vq->first_desc; i < vq->ndescs; ++i) {
>   		unsigned iov_count = *in_num + *out_num;
> @@ -2340,6 +2341,7 @@ int vhost_get_vq_desc(struct vhost_virtqueue *vq,
>   			/* If this is an input descriptor,
>   			 * increment that count. */
>   			*in_num += ret;
> +			buf->in_len += desc->len;
>   			if (unlikely(log && ret)) {
>   				log[*log_num].addr = desc->addr;
>   				log[*log_num].len = desc->len;
> @@ -2355,9 +2357,11 @@ int vhost_get_vq_desc(struct vhost_virtqueue *vq,
>   				goto err;
>   			}
>   			*out_num += ret;
> +			buf->out_len += desc->len;
>   		}
>   
> -		ret = desc->id;
> +		buf->id = desc->id;
> +		++buf->descs;
>   
>   		if (!(desc->flags & VRING_DESC_F_NEXT))
>   			break;
> @@ -2365,7 +2369,7 @@ int vhost_get_vq_desc(struct vhost_virtqueue *vq,
>   
>   	vq->first_desc = i + 1;
>   
> -	return ret;
> +	return 1;
>   
>   err:
>   	for (i = vq->first_desc; i < vq->ndescs; ++i)
> @@ -2375,7 +2379,15 @@ int vhost_get_vq_desc(struct vhost_virtqueue *vq,
>   
>   	return ret;
>   }
> -EXPORT_SYMBOL_GPL(vhost_get_vq_desc);
> +EXPORT_SYMBOL_GPL(vhost_get_avail_buf);
> +
> +/* Reverse the effect of vhost_get_avail_buf. Useful for error handling. */
> +void vhost_discard_avail_bufs(struct vhost_virtqueue *vq,
> +			      struct vhost_buf *buf, unsigned count)
> +{
> +	vhost_discard_vq_desc(vq, count);
> +}
> +EXPORT_SYMBOL_GPL(vhost_discard_avail_bufs);
>   
>   static int __vhost_add_used_n(struct vhost_virtqueue *vq,
>   			    struct vring_used_elem *heads,
> @@ -2459,6 +2471,26 @@ int vhost_add_used(struct vhost_virtqueue *vq, unsigned int head, int len)
>   }
>   EXPORT_SYMBOL_GPL(vhost_add_used);
>   
> +int vhost_put_used_buf(struct vhost_virtqueue *vq, struct vhost_buf *buf)
> +{
> +	return vhost_add_used(vq, buf->id, buf->in_len);
> +}
> +EXPORT_SYMBOL_GPL(vhost_put_used_buf);
> +
> +int vhost_put_used_n_bufs(struct vhost_virtqueue *vq,
> +			  struct vhost_buf *bufs, unsigned count)
> +{
> +	unsigned i;
> +
> +	for (i = 0; i < count; ++i) {
> +		vq->heads[i].id = cpu_to_vhost32(vq, bufs[i].id);
> +		vq->heads[i].len = cpu_to_vhost32(vq, bufs[i].in_len);
> +	}
> +
> +	return vhost_add_used_n(vq, vq->heads, count);
> +}
> +EXPORT_SYMBOL_GPL(vhost_put_used_n_bufs);
> +
>   static bool vhost_notify(struct vhost_dev *dev, struct vhost_virtqueue *vq)
>   {
>   	__u16 old, new;
> diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
> index a67bda9792ec..6c10e99ff334 100644
> --- a/drivers/vhost/vhost.h
> +++ b/drivers/vhost/vhost.h
> @@ -67,6 +67,13 @@ struct vhost_desc {
>   	u16 id;
>   };
>   
> +struct vhost_buf {
> +	u32 out_len;
> +	u32 in_len;
> +	u16 descs;
> +	u16 id;
> +};


So it looks to me the struct vhost_buf can work for both split ring and 
packed ring.

If this is true, we'd better make struct vhost_desc work for both.

Thanks


> +
>   /* The virtqueue structure describes a queue attached to a device. */
>   struct vhost_virtqueue {
>   	struct vhost_dev *dev;
> @@ -193,7 +200,12 @@ int vhost_get_vq_desc(struct vhost_virtqueue *,
>   		      unsigned int *out_num, unsigned int *in_num,
>   		      struct vhost_log *log, unsigned int *log_num);
>   void vhost_discard_vq_desc(struct vhost_virtqueue *, int n);
> -
> +int vhost_get_avail_buf(struct vhost_virtqueue *, struct vhost_buf *buf,
> +			struct iovec iov[], unsigned int iov_count,
> +			unsigned int *out_num, unsigned int *in_num,
> +			struct vhost_log *log, unsigned int *log_num);
> +void vhost_discard_avail_bufs(struct vhost_virtqueue *,
> +			      struct vhost_buf *, unsigned count);
>   int vhost_vq_init_access(struct vhost_virtqueue *);
>   int vhost_add_used(struct vhost_virtqueue *, unsigned int head, int len);
>   int vhost_add_used_n(struct vhost_virtqueue *, struct vring_used_elem *heads,
> @@ -202,6 +214,9 @@ void vhost_add_used_and_signal(struct vhost_dev *, struct vhost_virtqueue *,
>   			       unsigned int id, int len);
>   void vhost_add_used_and_signal_n(struct vhost_dev *, struct vhost_virtqueue *,
>   			       struct vring_used_elem *heads, unsigned count);
> +int vhost_put_used_buf(struct vhost_virtqueue *, struct vhost_buf *buf);
> +int vhost_put_used_n_bufs(struct vhost_virtqueue *,
> +			  struct vhost_buf *bufs, unsigned count);
>   void vhost_signal(struct vhost_dev *, struct vhost_virtqueue *);
>   void vhost_disable_notify(struct vhost_dev *, struct vhost_virtqueue *);
>   bool vhost_vq_avail_empty(struct vhost_dev *, struct vhost_virtqueue *);


  reply	other threads:[~2020-06-03  7:58 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-02 13:05 [PATCH RFC 00/13] vhost: format independence Michael S. Tsirkin
2020-06-02 13:05 ` [PATCH RFC 01/13] vhost: option to fetch descriptors through an independent struct Michael S. Tsirkin
2020-06-03  7:13   ` Jason Wang
2020-06-03  9:48     ` Michael S. Tsirkin
2020-06-03 12:04       ` Jason Wang
2020-06-07 13:59         ` Michael S. Tsirkin
2020-06-02 13:05 ` [PATCH RFC 02/13] vhost: use batched version by default Michael S. Tsirkin
2020-06-03  7:15   ` Jason Wang
2020-06-02 13:06 ` [PATCH RFC 03/13] vhost: batching fetches Michael S. Tsirkin
2020-06-03  7:27   ` Jason Wang
2020-06-04  8:59     ` Michael S. Tsirkin
2020-06-05  3:40       ` Jason Wang
2020-06-07 13:57         ` Michael S. Tsirkin
2020-06-08  3:35           ` Jason Wang
2020-06-08  6:01             ` Michael S. Tsirkin
2020-06-02 13:06 ` [PATCH RFC 04/13] vhost: cleanup fetch_buf return code handling Michael S. Tsirkin
2020-06-03  7:29   ` Jason Wang
2020-06-04  9:01     ` Michael S. Tsirkin
2020-06-02 13:06 ` [PATCH RFC 05/13] vhost/net: pass net specific struct pointer Michael S. Tsirkin
2020-06-02 13:06 ` [PATCH RFC 06/13] vhost: reorder functions Michael S. Tsirkin
2020-06-02 13:06 ` [PATCH RFC 07/13] vhost: format-independent API for used buffers Michael S. Tsirkin
2020-06-03  7:58   ` Jason Wang [this message]
2020-06-04  9:03     ` Michael S. Tsirkin
2020-06-04  9:18       ` Jason Wang
2020-06-04 10:17         ` Michael S. Tsirkin
2020-06-02 13:06 ` [PATCH RFC 08/13] vhost/net: convert to new API: heads->bufs Michael S. Tsirkin
2020-06-03  8:11   ` Jason Wang
2020-06-04  9:05     ` Michael S. Tsirkin
2020-06-02 13:06 ` [PATCH RFC 09/13] vhost/net: avoid iov length math Michael S. Tsirkin
2020-06-02 13:06 ` [PATCH RFC 10/13] vhost/test: convert to the buf API Michael S. Tsirkin
2020-06-02 13:06 ` [PATCH RFC 11/13] vhost/scsi: switch to buf APIs Michael S. Tsirkin
2020-06-05  8:36   ` Stefan Hajnoczi
2020-06-02 13:06 ` [PATCH RFC 12/13] vhost/vsock: switch to the buf API Michael S. Tsirkin
2020-06-05  8:36   ` Stefan Hajnoczi
2020-06-02 13:06 ` [PATCH RFC 13/13] vhost: drop head based APIs Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6d98f2cc-2084-cde0-c938-4ca01692adf9@redhat.com \
    --to=jasowang@redhat.com \
    --cc=eperezma@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).