From: Viresh Kumar <viresh.kumar@linaro.org>
To: sameo@linux.intel.com
Cc: devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, spear-devel@list.st.com,
lee.jones@linaro.org, Vipul Kumar Samar <vipulkumar.samar@st.com>,
Viresh Kumar <viresh.kumar@linaro.org>
Subject: [PATCH V3 3/3] mfd: stmpe: Update DT support in stmpe driver
Date: Fri, 23 Nov 2012 00:26:20 +0530 [thread overview]
Message-ID: <7a48ae364663ab3a336251fada9aee07ccd728b8.1353610437.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <57384ebc52c7d39d1bae31ba3baa6f820b4ac696.1353610436.git.viresh.kumar@linaro.org>
In-Reply-To: <57384ebc52c7d39d1bae31ba3baa6f820b4ac696.1353610436.git.viresh.kumar@linaro.org>
From: Vipul Kumar Samar <vipulkumar.samar@st.com>
This patch extends existing DT support for stmpe devices. This updates:
- DT support from stmpe SPI and I2C drivers
- missing header files in stmpe.c
- stmpe_of_probe() with pwm, rotator and new bindings.
- Bindings are updated in binding document.
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
V2->V3:
------
- Removed sub-modules DT bindings from this patch
- Retain original work done by Lee Jones
Documentation/devicetree/bindings/mfd/stmpe.txt | 12 ++++++++----
drivers/mfd/stmpe-i2c.c | 15 +++++++++++++++
drivers/mfd/stmpe-spi.c | 15 +++++++++++++++
drivers/mfd/stmpe.c | 21 +++++++++++++++------
4 files changed, 53 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
index 8f0aeda..8f65c8d 100644
--- a/Documentation/devicetree/bindings/mfd/stmpe.txt
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -1,13 +1,17 @@
-* STMPE Multi-Functional Device
+* ST Microelectronics STMPE Multi-Functional Device
+
+STMPE is an MFD device which may expose following inbuilt devices: gpio, keypad,
+touchscreen, adc, pwm, rotator.
Required properties:
- - compatible : "st,stmpe[811|1601|2401|2403]"
- - reg : I2C address of the device
+ - compatible : "st,stmpe[610|801|811|1601|2401|2403]"
+ - reg : I2C/SPI address of the device
Optional properties:
- interrupts : The interrupt outputs from the controller
- - interrupt-controller : Marks the device node as an interrupt controller
- interrupt-parent : Specifies which IRQ controller we're connected to
+ - irq-trigger : IRQ trigger to use for the interrupt to the host
+ - irq-invert-polarity : bool, IRQ line is connected with reversed polarity
- i2c-client-wake : Marks the input device as wakable
- st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index c734dc3..003c49b 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -13,6 +13,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/types.h>
#include "stmpe.h"
@@ -81,6 +82,19 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, stmpe_id);
+#ifdef CONFIG_OF
+static const struct of_device_id stmpe_dt_ids[] = {
+ { .compatible = "st,stmpe610", .data = &stmpe_i2c_id[0], },
+ { .compatible = "st,stmpe801", .data = &stmpe_i2c_id[1], },
+ { .compatible = "st,stmpe811", .data = &stmpe_i2c_id[2], },
+ { .compatible = "st,stmpe1601", .data = &stmpe_i2c_id[3], },
+ { .compatible = "st,stmpe2401", .data = &stmpe_i2c_id[4], },
+ { .compatible = "st,stmpe2403", .data = &stmpe_i2c_id[5], },
+ { }
+};
+MODULE_DEVICE_TABLE(of, stmpe_dt_ids);
+#endif
+
static struct i2c_driver stmpe_i2c_driver = {
.driver = {
.name = "stmpe-i2c",
@@ -88,6 +102,7 @@ static struct i2c_driver stmpe_i2c_driver = {
#ifdef CONFIG_PM
.pm = &stmpe_dev_pm_ops,
#endif
+ .of_match_table = of_match_ptr(stmpe_dt_ids),
},
.probe = stmpe_i2c_probe,
.remove = __devexit_p(stmpe_i2c_remove),
diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c
index f86e3fc..e482f5f 100644
--- a/drivers/mfd/stmpe-spi.c
+++ b/drivers/mfd/stmpe-spi.c
@@ -10,6 +10,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
#include "stmpe.h"
@@ -119,6 +120,19 @@ static const struct spi_device_id stmpe_spi_id[] = {
};
MODULE_DEVICE_TABLE(spi, stmpe_id);
+#ifdef CONFIG_OF
+static const struct of_device_id stmpe_dt_ids[] = {
+ { .compatible = "st,stmpe610", .data = (void *)STMPE610, },
+ { .compatible = "st,stmpe801", .data = (void *)STMPE801, },
+ { .compatible = "st,stmpe811", .data = (void *)STMPE811, },
+ { .compatible = "st,stmpe1601", .data = (void *)STMPE1601, },
+ { .compatible = "st,stmpe2401", .data = (void *)STMPE2401, },
+ { .compatible = "st,stmpe2403", .data = (void *)STMPE2403, },
+ { }
+};
+MODULE_DEVICE_TABLE(of, stmpe_dt_ids);
+#endif
+
static struct spi_driver stmpe_spi_driver = {
.driver = {
.name = "stmpe-spi",
@@ -126,6 +140,7 @@ static struct spi_driver stmpe_spi_driver = {
#ifdef CONFIG_PM
.pm = &stmpe_dev_pm_ops,
#endif
+ .of_match_table = of_match_ptr(stmpe_dt_ids),
},
.probe = stmpe_spi_probe,
.remove = __devexit_p(stmpe_spi_remove),
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 6086481..e2c0dda 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -7,6 +7,7 @@
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
*/
+#include <linux/err.h>
#include <linux/export.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
@@ -14,6 +15,8 @@
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/mfd/core.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include "stmpe.h"
@@ -1028,18 +1031,24 @@ void __devinit stmpe_of_probe(struct stmpe_platform_data *pdata,
pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
+ of_property_read_u32(np, "irq-trigger", &pdata->irq_trigger);
+
+ if (of_property_read_bool(np, "irq-invert-polarity"))
+ pdata->irq_invert_polarity = true;
+
for_each_child_of_node(np, child) {
if (!strcmp(child->name, "stmpe_gpio")) {
pdata->blocks |= STMPE_BLOCK_GPIO;
- }
- if (!strcmp(child->name, "stmpe_keypad")) {
+ } else if (!strcmp(child->name, "stmpe_keypad")) {
pdata->blocks |= STMPE_BLOCK_KEYPAD;
- }
- if (!strcmp(child->name, "stmpe_touchscreen")) {
+ } else if (!strcmp(child->name, "stmpe_touchscreen")) {
pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
- }
- if (!strcmp(child->name, "stmpe_adc")) {
+ } else if (!strcmp(child->name, "stmpe_adc")) {
pdata->blocks |= STMPE_BLOCK_ADC;
+ } else if (!strcmp(child->name, "stmpe_pwm")) {
+ pdata->blocks |= STMPE_BLOCK_PWM;
+ } else if (!strcmp(child->name, "stmpe_rotator")) {
+ pdata->blocks |= STMPE_BLOCK_ROTATOR;
}
}
}
--
1.7.12.rc2.18.g61b472e
next prev parent reply other threads:[~2012-11-22 18:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 18:56 [PATCH V1 1/3] mfd: stmpe: Arrange #include <header files> in alphabetical order Viresh Kumar
2012-11-22 18:56 ` [PATCH V1 2/3] mfd: stmpe-i2c: Move .driver structure fields inside {} in stmpe_i2c_driver Viresh Kumar
2012-11-26 11:15 ` Samuel Ortiz
2012-11-22 18:56 ` Viresh Kumar [this message]
2012-11-23 9:41 ` [PATCH V3 3/3] mfd: stmpe: Update DT support in stmpe driver Grant Likely
2012-11-23 17:33 ` Viresh Kumar
2012-11-26 11:18 ` Lee Jones
2012-11-26 18:40 ` Grant Likely
2012-11-27 2:40 ` Viresh Kumar
2012-11-27 3:28 ` Viresh Kumar
2012-11-27 8:40 ` Lee Jones
2012-11-27 8:46 ` Viresh Kumar
2012-11-27 19:55 ` Rabin Vincent
2012-11-28 2:13 ` Viresh Kumar
2012-11-28 9:00 ` Lee Jones
2012-11-23 10:03 ` Lee Jones
2012-11-26 11:16 ` [PATCH V1 1/3] mfd: stmpe: Arrange #include <header files> in alphabetical order Samuel Ortiz
2012-11-26 11:22 ` Viresh Kumar
2012-11-26 13:25 ` Lee Jones
2012-11-26 14:55 ` Viresh Kumar
2012-11-26 15:31 ` Lee Jones
2012-11-26 16:05 ` Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a48ae364663ab3a336251fada9aee07ccd728b8.1353610437.git.viresh.kumar@linaro.org \
--to=viresh.kumar@linaro.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=spear-devel@list.st.com \
--cc=vipulkumar.samar@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).