linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: yhlu <yhlu.kernel@gmail.com>
To: Roland Dreier <rolandd@cisco.com>
Cc: linux-kernel@vger.kernel.org, openib-general@openib.org
Subject: Re: mthca and LinuxBIOS
Date: Thu, 4 Aug 2005 11:01:55 -0700	[thread overview]
Message-ID: <86802c4405080411013b60382c@mail.gmail.com> (raw)
In-Reply-To: <86802c4405080410236ba59619@mail.gmail.com>

i enable CCONFIG_INFINIBAND_MTHCA_DEBUG=y

I didn't get any more debug info, is that depend other setting?

YH

On 8/4/05, yhlu <yhlu.kernel@gmail.com> wrote:
> The mellanox can use prefmem64, but the BIOS could only allocate the
> some range below 4G, So 32 bit OS still can use the IB cards.
> but for 64bit OS, We could allocate range above 4G (0xfc00000000), So
> the mmio below 4G can be smaller. ( for example from 512M to 128M, the
> user can get back some RAM back if Opteron don't have hardware memhole
> support).
> 
> YH
> 
> 
> 
> On 8/4/05, Roland Dreier <rolandd@cisco.com> wrote:
> > >>>>> "yhlu" == yhlu  <yhlu.kernel@gmail.com> writes:
> >
> >     yhlu> YES.  I will send you the output message later about
> >     yhlu> "CONFIG_INFINIBAND_MTHCA_DEBUG=y"
> >
> > Thanks.  In the meantime, can you explain what it means to "enable the
> > prefmem64 to use real 64 range"?  What is the difference between this
> > and the configuration that works?
> >
> >  - R.
> >
>

  reply	other threads:[~2005-08-04 18:01 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-07-28 20:31 [PATCH 0/2] REALLY final InfiniBand updates for 2.6.13 Roland Dreier
2005-07-28 20:31 ` [PATCH 1/2] [IB/cm]: Correct CM port redirect reject codes Roland Dreier
2005-07-28 20:31   ` [PATCH 2/2] [IPoIB] Handle sending of unicast RARP responses Roland Dreier
2005-08-04  0:58   ` [PATCH 1/2] [IB/cm]: Correct CM port redirect reject codes yhlu
2005-08-04  1:39     ` [openib-general] " Grant Grundler
2005-08-04  4:44     ` mthca and LinuxBIOS (was: [PATCH 1/2] [IB/cm]: Correct CM port redirect reject codes) Roland Dreier
2005-08-04 16:33       ` yhlu
2005-08-04 16:36         ` mthca and LinuxBIOS Roland Dreier
2005-08-04 17:23           ` yhlu
2005-08-04 18:01             ` yhlu [this message]
2005-08-04 18:35               ` Roland Dreier
2005-08-04 19:30                 ` yhlu
2005-08-05  3:47                   ` Roland Dreier
2005-08-05 18:03                     ` yhlu
2005-08-05 18:07                       ` yhlu
2005-08-05 18:13                         ` Roland Dreier
2005-08-05 18:26                           ` yhlu
2005-08-05 19:25                             ` yhlu
2005-08-05 19:45                               ` yhlu
2005-08-05 20:28                                 ` yhlu
2005-08-05 20:38                                   ` Linus Torvalds
2005-08-05 22:00                                     ` Greg KH
2005-08-05 22:25                                       ` yhlu
2005-08-05 23:03                                         ` Greg KH
2005-08-06  5:29                                           ` [openib-general] " Grant Grundler
2005-08-05 23:06                                       ` Linus Torvalds
2005-08-05 23:59                                         ` [openib-general] " Grant Grundler
2005-08-06  4:33                                           ` Grant Grundler
2005-08-06 23:52                                             ` yhlu
2005-08-07  9:49                                             ` Ivan Kokshaysky
2005-08-05 18:11                       ` Roland Dreier
2005-08-06  0:57                       ` yhlu
2005-08-06  1:30                         ` Roland Dreier
2005-08-06  2:47                           ` yhlu
2005-08-04  6:42     ` [PATCH 1/2] [IB/cm]: Correct CM port redirect reject codes Michael S. Tsirkin
2005-08-04 18:22       ` yhlu
2005-08-08 12:21         ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=86802c4405080411013b60382c@mail.gmail.com \
    --to=yhlu.kernel@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=openib-general@openib.org \
    --cc=rolandd@cisco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).