* [PATCH 0/2] Add initial support for RDP446 of IPQ5332 family @ 2023-06-06 9:57 Hariharan K 2023-06-06 9:57 ` [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on " Hariharan K 2023-06-06 9:57 ` [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP446 variant Hariharan K 0 siblings, 2 replies; 8+ messages in thread From: Hariharan K @ 2023-06-06 9:57 UTC (permalink / raw) To: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha Add the initial device tree support for the Reference Design Platform(RDP) 446 based on IPQ5332 family of SoC. This patch carries the support for Console UART, SPI NOR and I2C. Hariharan K (2): dt-bindings: arm: qcom: document MI04.1 board based on IPQ5332 family arm64: dts: qcom: ipq5332: add support for the RDP446 variant .../devicetree/bindings/arm/qcom.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts | 83 +++++++++++++++++++ 3 files changed, 86 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts -- 2.17.1 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on IPQ5332 family 2023-06-06 9:57 [PATCH 0/2] Add initial support for RDP446 of IPQ5332 family Hariharan K @ 2023-06-06 9:57 ` Hariharan K 2023-06-06 11:28 ` Krzysztof Kozlowski 2023-06-06 9:57 ` [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP446 variant Hariharan K 1 sibling, 1 reply; 8+ messages in thread From: Hariharan K @ 2023-06-06 9:57 UTC (permalink / raw) To: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha Document the MI04.1 (Reference Design Platform 446) board based on IPQ5332 family of SoCs. Signed-off-by: Hariharan K <quic_harihk@quicinc.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 8302d1ee280d..165a815337f7 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -93,6 +93,7 @@ description: | ap-mi01.2 ap-mi01.3 ap-mi01.6 + ap-mi04.1 cdp cp01-c1 dragonboard @@ -340,6 +341,7 @@ properties: - qcom,ipq5332-ap-mi01.2 - qcom,ipq5332-ap-mi01.3 - qcom,ipq5332-ap-mi01.6 + - qcom,ipq5332-ap-mi04.1 - const: qcom,ipq5332 - items: -- 2.17.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on IPQ5332 family 2023-06-06 9:57 ` [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on " Hariharan K @ 2023-06-06 11:28 ` Krzysztof Kozlowski 2023-06-13 23:04 ` Bjorn Andersson 0 siblings, 1 reply; 8+ messages in thread From: Krzysztof Kozlowski @ 2023-06-06 11:28 UTC (permalink / raw) To: Hariharan K, agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha On 06/06/2023 11:57, Hariharan K wrote: > Document the MI04.1 (Reference Design Platform 446) board based on IPQ5332 > family of SoCs. > > Signed-off-by: Hariharan K <quic_harihk@quicinc.com> > --- > Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml > index 8302d1ee280d..165a815337f7 100644 > --- a/Documentation/devicetree/bindings/arm/qcom.yaml > +++ b/Documentation/devicetree/bindings/arm/qcom.yaml > @@ -93,6 +93,7 @@ description: | > ap-mi01.2 > ap-mi01.3 > ap-mi01.6 > + ap-mi04.1 I think we need to stop adding them here... This was supposed to be limited list for Qualcomm bootloader. Are you sure Qualcomm bootloader requires such names with versions? Best regards, Krzysztof ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on IPQ5332 family 2023-06-06 11:28 ` Krzysztof Kozlowski @ 2023-06-13 23:04 ` Bjorn Andersson 2023-06-14 10:40 ` Hariharan K 0 siblings, 1 reply; 8+ messages in thread From: Bjorn Andersson @ 2023-06-13 23:04 UTC (permalink / raw) To: Krzysztof Kozlowski, Hariharan K Cc: agross, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel, quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha On Tue, Jun 06, 2023 at 01:28:27PM +0200, Krzysztof Kozlowski wrote: > On 06/06/2023 11:57, Hariharan K wrote: > > Document the MI04.1 (Reference Design Platform 446) board based on IPQ5332 > > family of SoCs. > > > > Signed-off-by: Hariharan K <quic_harihk@quicinc.com> > > --- > > Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml > > index 8302d1ee280d..165a815337f7 100644 > > --- a/Documentation/devicetree/bindings/arm/qcom.yaml > > +++ b/Documentation/devicetree/bindings/arm/qcom.yaml > > @@ -93,6 +93,7 @@ description: | > > ap-mi01.2 > > ap-mi01.3 > > ap-mi01.6 > > + ap-mi04.1 > > I think we need to stop adding them here... This was supposed to be > limited list for Qualcomm bootloader. Are you sure Qualcomm bootloader > requires such names with versions? > Hariharan, can you please elaborate on what these numbers mean? Is this just a version of ap-mi04? Or do we have 5 different reference boards on IPQ5332, just with "cryptic" names? Regards, Bjorn ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on IPQ5332 family 2023-06-13 23:04 ` Bjorn Andersson @ 2023-06-14 10:40 ` Hariharan K 0 siblings, 0 replies; 8+ messages in thread From: Hariharan K @ 2023-06-14 10:40 UTC (permalink / raw) To: Bjorn Andersson, Krzysztof Kozlowski Cc: agross, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel, quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha On 6/14/2023 4:34 AM, Bjorn Andersson wrote: > On Tue, Jun 06, 2023 at 01:28:27PM +0200, Krzysztof Kozlowski wrote: >> On 06/06/2023 11:57, Hariharan K wrote: >>> Document the MI04.1 (Reference Design Platform 446) board based on IPQ5332 >>> family of SoCs. >>> >>> Signed-off-by: Hariharan K <quic_harihk@quicinc.com> >>> --- >>> Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml >>> index 8302d1ee280d..165a815337f7 100644 >>> --- a/Documentation/devicetree/bindings/arm/qcom.yaml >>> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml >>> @@ -93,6 +93,7 @@ description: | >>> ap-mi01.2 >>> ap-mi01.3 >>> ap-mi01.6 >>> + ap-mi04.1 >> >> I think we need to stop adding them here... This was supposed to be >> limited list for Qualcomm bootloader. Are you sure Qualcomm bootloader >> requires such names with versions? >> > > Hariharan, can you please elaborate on what these numbers mean? Is this > just a version of ap-mi04? Or do we have 5 different reference boards on > IPQ5332, just with "cryptic" names? > > Regards, > Bjorn Yes. These are different reference board designs based on IPQ5332. Thanks, Hariharan K ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP446 variant 2023-06-06 9:57 [PATCH 0/2] Add initial support for RDP446 of IPQ5332 family Hariharan K 2023-06-06 9:57 ` [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on " Hariharan K @ 2023-06-06 9:57 ` Hariharan K 2023-06-14 10:43 ` Konrad Dybcio 1 sibling, 1 reply; 8+ messages in thread From: Hariharan K @ 2023-06-06 9:57 UTC (permalink / raw) To: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha Add the initial device tree support for the Reference Design Platform(RDP) 446 based on IPQ5332 family of SoC. This patch carries the support for Console UART, SPI NOR and I2C. Signed-off-by: Hariharan K <quic_harihk@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts | 83 +++++++++++++++++++++ 2 files changed, 84 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 4f9e81253e18..f962e1b7cf7a 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp446.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts new file mode 100644 index 000000000000..0e1d98b093e4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 AP-MI04.1 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI04.1"; + compatible = "qcom,ipq5332-ap-mi04.1", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + spi_0_data_clk_pins: spi-0-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-down; + }; + + spi_0_cs_pins: spi-0-cs-state { + pins = "gpio17"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-up; + }; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP446 variant 2023-06-06 9:57 ` [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP446 variant Hariharan K @ 2023-06-14 10:43 ` Konrad Dybcio 2023-06-14 10:59 ` Hariharan K 0 siblings, 1 reply; 8+ messages in thread From: Konrad Dybcio @ 2023-06-14 10:43 UTC (permalink / raw) To: Hariharan K, agross, andersson, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha On 6.06.2023 11:57, Hariharan K wrote: > Add the initial device tree support for the Reference Design > Platform(RDP) 446 based on IPQ5332 family of SoC. This patch carries > the support for Console UART, SPI NOR and I2C. > > Signed-off-by: Hariharan K <quic_harihk@quicinc.com> > --- Please consider making a common dtsi, like for 9574 here: https://lore.kernel.org/linux-arm-msm/20230614085040.22071-1-quic_anusha@quicinc.com Konrad > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts | 83 +++++++++++++++++++++ > 2 files changed, 84 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 4f9e81253e18..f962e1b7cf7a 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb > dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp446.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts > new file mode 100644 > index 000000000000..0e1d98b093e4 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts > @@ -0,0 +1,83 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * IPQ5332 AP-MI04.1 board device tree source > + * > + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq5332.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ5332 MI04.1"; > + compatible = "qcom,ipq5332-ap-mi04.1", "qcom,ipq5332"; > + > + aliases { > + serial0 = &blsp1_uart0; > + }; > + > + chosen { > + stdout-path = "serial0"; > + }; > +}; > + > +&blsp1_uart0 { > + pinctrl-0 = <&serial_0_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&blsp1_i2c1 { > + clock-frequency = <400000>; > + pinctrl-0 = <&i2c_1_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&blsp1_spi0 { > + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + > + flash@0 { > + compatible = "micron,n25q128a11", "jedec,spi-nor"; > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <50000000>; > + }; > +}; > + > +&sleep_clk { > + clock-frequency = <32000>; > +}; > + > +&xo_board { > + clock-frequency = <24000000>; > +}; > + > +/* PINCTRL */ > + > +&tlmm { > + i2c_1_pins: i2c-1-state { > + pins = "gpio29", "gpio30"; > + function = "blsp1_i2c0"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > + spi_0_data_clk_pins: spi-0-data-clk-state { > + pins = "gpio14", "gpio15", "gpio16"; > + function = "blsp0_spi"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + spi_0_cs_pins: spi-0-cs-state { > + pins = "gpio17"; > + function = "blsp0_spi"; > + drive-strength = <2>; > + bias-pull-up; > + }; > +}; ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP446 variant 2023-06-14 10:43 ` Konrad Dybcio @ 2023-06-14 10:59 ` Hariharan K 0 siblings, 0 replies; 8+ messages in thread From: Hariharan K @ 2023-06-14 10:59 UTC (permalink / raw) To: Konrad Dybcio, agross, andersson, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha ipq5332-rdp-common.dtsi will be posted shortly. This patch will be re-based on top of it. Regards, Hariharan K On 6/14/2023 4:13 PM, Konrad Dybcio wrote: > > > On 6.06.2023 11:57, Hariharan K wrote: >> Add the initial device tree support for the Reference Design >> Platform(RDP) 446 based on IPQ5332 family of SoC. This patch carries >> the support for Console UART, SPI NOR and I2C. >> >> Signed-off-by: Hariharan K <quic_harihk@quicinc.com> >> --- > Please consider making a common dtsi, like for 9574 here: > > https://lore.kernel.org/linux-arm-msm/20230614085040.22071-1-quic_anusha@quicinc.com > > Konrad >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts | 83 +++++++++++++++++++++ >> 2 files changed, 84 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 4f9e81253e18..f962e1b7cf7a 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb >> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp446.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts >> new file mode 100644 >> index 000000000000..0e1d98b093e4 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp446.dts >> @@ -0,0 +1,83 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * IPQ5332 AP-MI04.1 board device tree source >> + * >> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq5332.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ5332 MI04.1"; >> + compatible = "qcom,ipq5332-ap-mi04.1", "qcom,ipq5332"; >> + >> + aliases { >> + serial0 = &blsp1_uart0; >> + }; >> + >> + chosen { >> + stdout-path = "serial0"; >> + }; >> +}; >> + >> +&blsp1_uart0 { >> + pinctrl-0 = <&serial_0_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&blsp1_i2c1 { >> + clock-frequency = <400000>; >> + pinctrl-0 = <&i2c_1_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&blsp1_spi0 { >> + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> + >> + flash@0 { >> + compatible = "micron,n25q128a11", "jedec,spi-nor"; >> + reg = <0>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + spi-max-frequency = <50000000>; >> + }; >> +}; >> + >> +&sleep_clk { >> + clock-frequency = <32000>; >> +}; >> + >> +&xo_board { >> + clock-frequency = <24000000>; >> +}; >> + >> +/* PINCTRL */ >> + >> +&tlmm { >> + i2c_1_pins: i2c-1-state { >> + pins = "gpio29", "gpio30"; >> + function = "blsp1_i2c0"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + >> + spi_0_data_clk_pins: spi-0-data-clk-state { >> + pins = "gpio14", "gpio15", "gpio16"; >> + function = "blsp0_spi"; >> + drive-strength = <2>; >> + bias-pull-down; >> + }; >> + >> + spi_0_cs_pins: spi-0-cs-state { >> + pins = "gpio17"; >> + function = "blsp0_spi"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> +}; ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2023-06-14 11:00 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-06-06 9:57 [PATCH 0/2] Add initial support for RDP446 of IPQ5332 family Hariharan K 2023-06-06 9:57 ` [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on " Hariharan K 2023-06-06 11:28 ` Krzysztof Kozlowski 2023-06-13 23:04 ` Bjorn Andersson 2023-06-14 10:40 ` Hariharan K 2023-06-06 9:57 ` [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP446 variant Hariharan K 2023-06-14 10:43 ` Konrad Dybcio 2023-06-14 10:59 ` Hariharan K
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).