[PATCH 4.20 000/171] 4.20.16-stable review

[PATCH 4.20 000/171] 4.20.16-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.20.16 release.
There are 171 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Mar 14 17:02:23 UTC 2019.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.16-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.20.16-rc1

Peter Zijlstra (Intel) <peterz@infradead.org>
    perf/x86/intel: Implement support for TSX Force Abort

Peter Zijlstra (Intel) <peterz@infradead.org>
    x86: Add TSX Force Abort CPUID/MSR

Peter Zijlstra (Intel) <peterz@infradead.org>
    perf/x86/intel: Generalize dynamic constraint creation

Peter Zijlstra (Intel) <peterz@infradead.org>
    perf/x86/intel: Make cpuc allocations consistent

Daniel F. Dickinson <cshored@thecshore.com>
    ath9k: Avoid OF no-EEPROM quirks without qca,no-eeprom

Gao Xiang <gaoxiang25@huawei.com>
    staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Fix missed wakeups in find_insert_glock

Jakub Sitnicki <jakub@cloudflare.com>
    bpf: Stop the psock parser before canceling its work

Jakub Sitnicki <jakub@cloudflare.com>
    sk_msg: Always cancel strp work before freeing the psock

Mika Westerberg <mika.westerberg@linux.intel.com>
    Revert "PCI/PME: Implement runtime PM callbacks"

Sean Young <sean@mess.org>
    media: Revert "media: rc: some events are dropped by userspace"

Ard Biesheuvel <ard.biesheuvel@linaro.org>
    drm: disable uncached DMA optimization for ARM and arm64

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3

Alistair Strachan <astrachan@google.com>
    arm64: dts: hikey: Revert "Enable HS200 mode on eMMC"

Jan Kiszka <jan.kiszka@siemens.com>
    arm64: dts: hikey: Give wifi some time after power-on

Jan Kiszka <jan.kiszka@siemens.com>
    arm64: dts: zcu100-revC: Give wifi some time after power-on

Alexander Shishkin <alexander.shishkin@linux.intel.com>
    x86/PCI: Fixup RTIT_BAR of Intel Denverton Trace Hub

Gustavo A. R. Silva <gustavo@embeddedor.com>
    scsi: aacraid: Fix missing break in switch statement

Gustavo A. R. Silva <gustavo@embeddedor.com>
    iscsi_ibft: Fix missing break in switch statement

Vincent Batts <vbatts@hashbangbash.com>
    Input: elan_i2c - add id for touchpad found in Lenovo s21e-20

Jason Gerecke <jason.gerecke@wacom.com>
    Input: wacom_serial4 - add support for Wacom ArtPad II tablet

Florian Westphal <fw@strlen.de>
    netfilter: nft_compat: don't use refcount_inc on newly allocated entry

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: unbind set in rule from commit path

Keith Busch <keith.busch@intel.com>
    nvme-pci: add missing unlock for reset error

Liu Bo <bo.liu@linux.alibaba.com>
    blk-iolatency: fix IO hang due to negative inflight counter

Sudarsana Reddy Kalluru <skalluru@marvell.com>
    qede: Fix system crash on configuring channels.

Sudarsana Reddy Kalluru <skalluru@marvell.com>
    qed: Consider TX tcs while deriving the max num_queues for PF.

Manish Chopra <manishc@marvell.com>
    qed: Fix EQ full firmware assert.

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    fs: ratelimit __find_get_block_slow() failure message.

Keith Busch <keith.busch@intel.com>
    nvme-pci: fix rapid add remove sequence

Keith Busch <keith.busch@intel.com>
    nvme: lock NS list changes while handling command effects

Tomi Valkeinen <tomi.valkeinen@ti.com>
    drm/omap: dsi: Hack-fix DSI bus flags

Tomi Valkeinen <tomi.valkeinen@ti.com>
    drm/omap: dsi: Fix OF platform depopulate

Tomi Valkeinen <tomi.valkeinen@ti.com>
    drm/omap: dsi: Fix crash in DSI debug dumps

Philip Yang <Philip.Yang@amd.com>
    drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr

Tony Lindgren <tony@atomide.com>
    i2c: omap: Use noirq system sleep pm ops to idle device for suspend

Ross Lagerwall <ross.lagerwall@citrix.com>
    Revert "scsi: libfc: Add WARN_ON() when deleting rports"

Jun-Ru Chang <jrjang@realtek.com>
    MIPS: Remove function size check in get_frame_info()

Huacai Chen <chenhc@lemote.com>
    MIPS: Loongson: Introduce and use loongson_llsc_mb()

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf trace: Support multiple "vfs_getname" probes

Jiri Olsa <jolsa@redhat.com>
    perf symbols: Filter out hidden symbols from labels

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: conclude all event processing before offlining a card

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: cancel close_dev work before removing a card

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: fix use-after-free in error path

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: release cmd buffer in error paths

Martynas Pumputis <martynas@weave.works>
    netfilter: nf_nat: skip nat clash resolution for same-origin entries

Florian Westphal <fw@strlen.de>
    selftests: netfilter: add simple masq/redirect test cases

Naresh Kamboju <naresh.kamboju@linaro.org>
    selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    dmaengine: dmatest: Abort test in case of mapping error

Stefano Garzarella <sgarzare@redhat.com>
    vsock/virtio: reset connected sockets on device removal

Stefano Garzarella <sgarzare@redhat.com>
    vsock/virtio: fix kernel panic after device hot-unplug

Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
    dmaengine: at_xdmac: Fix wrongfull report of a channel as in use

Paul Kocialkowski <paul.kocialkowski@bootlin.com>
    drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init

Huang Rui <ray.huang@amd.com>
    drm/amdgpu: fix the incorrect external id for raven series

Jay Cornwall <Jay.Cornwall@amd.com>
    drm/amdgpu: Implement doorbell self-ring for NBIO 7.4

Martin KaFai Lau <kafai@fb.com>
    bpf: Fix syscall's stackmap lookup potential deadlock

Alexei Starovoitov <ast@kernel.org>
    bpf: fix potential deadlock in bpf_prog_register

Alexei Starovoitov <ast@kernel.org>
    bpf: fix lockdep false positive in percpu_freelist

Alexei Starovoitov <ast@kernel.org>
    bpf: run bpf programs with preemption disabled

Martynas Pumputis <m@lambda.lt>
    bpf, selftests: fix handling of sparse CPU allocations

Brian Norris <briannorris@chromium.org>
    ath10k: correct bus type for WCN3990

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    relay: check return of create_buf_file() properly

Zenghui Yu <yuzenghui@huawei.com>
    irqchip/gic-v3-its: Fix ITT_entry_size accessor

Jose Abreu <jose.abreu@synopsys.com>
    net: stmmac: Disable EEE mode earlier in XMIT callback

Jose Abreu <jose.abreu@synopsys.com>
    net: stmmac: Send TSO packets always from Queue 0

Jose Abreu <jose.abreu@synopsys.com>
    net: stmmac: Fallback to Platform Data clock in Watchdog conversion

Chris Wilson <chris@chris-wilson.co.uk>
    drm/amdgpu: Transfer fences to dmabuf importer

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: check if device is root before getting pci speed caps

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu: Add missing power attribute to APU check

Lubomir Rintel <lkundrak@v3.sk>
    irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable

Marc Zyngier <marc.zyngier@arm.com>
    irqchip/gic-v3-its: Gracefully fail on LPI exhaustion

Heyi Guo <guoheyi@huawei.com>
    irqchip/gic-v4: Fix occasional VLPI drop

Alexey Khoroshilov <khoroshilov@ispras.ru>
    usb: dwc3: exynos: Fix error handling of clk_prepare_enable

Anders Roxell <anders.roxell@linaro.org>
    usb: phy: fix link errors

Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
    DTS: CI20: Fix bugs in ci20's device tree.

Paul Cercueil <paul@crapouillou.net>
    MIPS: DTS: jz4740: Correct interrupt number of DMA core

Felix Fietkau <nbd@nbd.name>
    batman-adv: release station info tidstats

Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    arm64: dts: add msm8996 compatible to gicv3

Heiko Schocher <hs@denx.de>
    ARM: dts: am335x-shc.dts: fix wrong cd pin level

Arthur Demchenkov <spinal.by@gmail.com>
    ARM: dts: n900: fix mmc1 card detect gpio polarity

Tony Lindgren <tony@atomide.com>
    ARM: dts: omap3-gta04: Fix graph_port warning

Peng Hao <peng.hao2@zte.com.cn>
    ARM: pxa: ssp: unneeded to free devm_ allocated data

Yafang Shao <laoar.shao@gmail.com>
    bpf: sock recvbuff must be limited by rmem_max in bpf_setsockopt()

Paolo Abeni <pabeni@redhat.com>
    bpftool: fix percpu maps updating

Jiri Olsa <jolsa@kernel.org>
    bpftool: Fix prog dump by tag

Ulf Hansson <ulf.hansson@linaro.org>
    wlcore: sdio: Fixup power on/off sequence

Jason Kridner <jkridner@gmail.com>
    pinctrl: mcp23s08: spi: Fix regmap allocation for mcp23s18

Madalin Bucur <madalin.bucur@nxp.com>
    soc: fsl: qbman: avoid race in clearing QMan interrupt

Geert Uytterhoeven <geert+renesas@glider.be>
    arm64: dts: renesas: r8a77965: Enable DMA for SCIF2

Geert Uytterhoeven <geert+renesas@glider.be>
    arm64: dts: renesas: r8a7796: Enable DMA for SCIF2

Anson Huang <anson.huang@nxp.com>
    ARM: dts: imx6sx: correct backward compatible of gpt

Eric W. Biederman <ebiederm@xmission.com>
    signal: Make siginmask safe when passed a signal of 0

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low

Carlo Caione <ccaione@baylibre.com>
    arm: dts: meson: Fix IRQ trigger type for macirq

Jernej Skrabec <jernej.skrabec@siol.net>
    ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2

Tony Lindgren <tony@atomide.com>
    ARM: dts: omap4-droid4: Fix typo in cpcap IRQ flags

Aaro Koskinen <aaro.koskinen@iki.fi>
    ARM: OMAP: dts: N950/N9: fix onenand timings

Michal Hocko <mhocko@suse.com>
    mm, memory_hotplug: fix off-by-one in is_pageblock_removable

Ian Kent <raven@themaw.net>
    autofs: fix error return in autofs_fill_super()

Pan Bian <bianpan2016@163.com>
    autofs: drop dentry reference only when it is never used

Jan Kara <jack@suse.cz>
    fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()

Dan Carpenter <dan.carpenter@oracle.com>
    lib/test_kmod.c: potential double free in error handling

Johannes Weiner <hannes@cmpxchg.org>
    psi: fix aggregation idle shut-off

Mikhail Zaslonko <zaslonko@linux.ibm.com>
    mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone

Michal Hocko <mhocko@suse.com>
    mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone

Qian Cai <cai@lca.pw>
    x86_64: increase stack size for KASAN_EXTRA

Alexey Dobriyan <adobriyan@gmail.com>
    proc: fix /proc/net/* after setns(2)

Kairui Song <kasong@redhat.com>
    x86/kexec: Don't setup EFI info if EFI runtime is not enabled

John Johansen <john.johansen@canonical.com>
    apparmor: Fix aa_label_build() error handling for failed merges

James Morse <james.morse@arm.com>
    arm64: kprobe: Always blacklist the KVM world-switch code

Petr Vorel <pvorel@suse.cz>
    apparmor: Fix warning about unused function apparmor_ipv6_postroute

Thomas Lendacky <Thomas.Lendacky@amd.com>
    x86/microcode/amd: Don't falsely trick the late loading mechanism

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: fix computation for MAX_SMB2_HDR_SIZE

Wei Huang <wei@redhat.com>
    x86/boot/compressed/64: Set EFER.LME=1 in 32-bit trampoline before returning to long mode

Harini Katakam <harini.katakam@xilinx.com>
    net: macb: Apply RXUBR workaround only to versions with errata

Kan Liang <kan.liang@linux.intel.com>
    x86/cpu: Add Atom Tremont (Jacobsville)

Sinan Kaya <okaya@kernel.org>
    platform/x86: Fix unmet dependency warning for SAMSUNG_Q10

Sinan Kaya <okaya@kernel.org>
    platform/x86: Fix unmet dependency warning for ACPI_CMPC

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: 53c700: pass correct "dev" to dma_alloc_attrs()

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: bnx2fc: Fix error handling in probe()

Douglas Gilbert <dgilbert@interlog.com>
    scsi: scsi_debug: fix write_same with virtual_gb problem

Ming Lu <ming.lu@citrix.com>
    scsi: libfc: free skb when receiving invalid flogi resp

Manish Chopra <manishc@marvell.com>
    qed: Fix stack out of bounds bug

Manish Chopra <manishc@marvell.com>
    qed: Fix system crash in ll2 xmit

Manish Chopra <manishc@marvell.com>
    qed: Fix VF probe failure while FLR

Manish Chopra <manishc@marvell.com>
    qed: Fix LACP pdu drops for VFs

Manish Chopra <manishc@marvell.com>
    qed: Fix bug in tx promiscuous mode settings

Yao Liu <yotta.liu@ucloud.cn>
    nfs: Fix NULL pointer dereference of dev_name

Fathi Boudra <fathi.boudra@linaro.org>
    selftests: timers: use LDLIBS instead of LDFLAGS

Fathi Boudra <fathi.boudra@linaro.org>
    selftests: net: use LDLIBS instead of LDFLAGS

Andrew Lunn <andrew@lunn.ch>
    gpio: vf610: Mask all GPIO interrupts

Florian Westphal <fw@strlen.de>
    netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present

Alexey Khoroshilov <khoroshilov@ispras.ru>
    net: stmmac: dwmac-rk: fix error handling in rk_gmac_powerup()

Yonglong Liu <liuyonglong@huawei.com>
    net: hns: Fix wrong read accesses via Clause 45 MDIO protocol

Yonglong Liu <liuyonglong@huawei.com>
    net: hns: Restart autoneg need return failed when autoneg off

Yonglong Liu <liuyonglong@huawei.com>
    net: hns: Fix for missing of_node_put() after of_parse_phandle()

Tomonori Sakita <tomonori.sakita@sord.co.jp>
    net: altera_tse: fix msgdma_tx_completion on non-zero fill_level case

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: SMP: limit number of possible CPUs by NR_CPUS

Christoph Hellwig <hch@lst.de>
    iomap: fix a use after free in iomap_dio_rw

Piotr Jaroszynski <pjaroszynski@nvidia.com>
    iomap: get/put the page in iomap_page_create/release()

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: SMP: mark each possible CPU as present

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: smp_lx200_defconfig: fix vectors clash

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: SMP: fix secondary CPU initialization

Colin Ian King <colin.king@canonical.com>
    selftests: cpu-hotplug: fix case where CPUs offline > CPUs present

Feras Daoud <ferasda@mellanox.com>
    IB/ipoib: Fix for use-after-free in ipoib_cm_tx_start

Alexandre Ghiti <aghiti@upmem.com>
    riscv: Adjust mmap base address at a third of task size

Artemy Kovalyov <artemyko@mellanox.com>
    RDMA/umem: Add missing initialization of owning_mm

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: SMP: fix ccount_timer_shutdown

Taniya Das <tdas@codeaurora.org>
    clk: qcom: gcc: Use active only source for CPUSS clocks

Dan Carpenter <dan.carpenter@oracle.com>
    clk: ti: Fix error handling in ti_clk_parse_divider_data()

Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
    iommu/amd: Fix IOMMU page flush when detach device from a domain

ZhangXiaoxu <zhangxiaoxu5@huawei.com>
    ipvs: Fix signed integer overflow when setsockopt timeout

Guo Ren <ren_guo@c-sky.com>
    riscv: fixup max_low_pfn with PFN_DOWN.

Jerry Snitselaar <jsnitsel@redhat.com>
    iommu/amd: Unmap all mapped pages in error path of map_sg

Jerry Snitselaar <jsnitsel@redhat.com>
    iommu/amd: Call free_iova_fast with pfn in map_sg

Brian Welty <brian.welty@intel.com>
    IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMM

Tony Jones <tonyj@suse.de>
    perf script: Fix crash when processing recorded stat data

Stephane Eranian <eranian@google.com>
    perf tools: Handle TOPOLOGY headers with no CPU

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf python: Remove -fstack-clash-protection when building with some clang versions

Stephane Eranian <eranian@google.com>
    perf core: Fix perf_proc_update_handler() bug

Andi Kleen <ak@linux.intel.com>
    perf script: Fix crash with printing mixed trace point and other events

Florian Westphal <fw@strlen.de>
    netfilter: nft_compat: destroy function must not have side effects

Florian Westphal <fw@strlen.de>
    netfilter: nft_compat: make lists per netns

Florian Westphal <fw@strlen.de>
    netfilter: nft_compat: use refcnt_t type for nft_xt reference count

Jiri Olsa <jolsa@kernel.org>
    perf ordered_events: Fix crash in ordered_events__free

Su Yanjun <suyj.fnst@cn.fujitsu.com>
    vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel

Alistair Strachan <astrachan@google.com>
    media: uvcvideo: Fix 'type' check leading to overflow


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/am335x-shc.dts                   |   2 +-
 arch/arm/boot/dts/exynos3250.dtsi                  |   3 +
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi    |  13 +-
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi      |   2 +-
 arch/arm/boot/dts/imx6sx.dtsi                      |   2 +-
 arch/arm/boot/dts/meson.dtsi                       |   2 +-
 arch/arm/boot/dts/meson8b-ec100.dts                |   3 +-
 arch/arm/boot/dts/meson8b-odroidc1.dts             |   4 +-
 arch/arm/boot/dts/meson8m2-mxiii-plus.dts          |   3 +-
 arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi     |   2 +-
 arch/arm/boot/dts/omap3-gta04.dtsi                 |   4 -
 arch/arm/boot/dts/omap3-n900.dts                   |   2 +-
 arch/arm/boot/dts/omap3-n950-n9.dtsi               |  42 +-
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          |   2 +-
 arch/arm/plat-pxa/ssp.c                            |   3 -
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts     |   2 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi              |   2 +-
 arch/arm64/boot/dts/renesas/r8a7796.dtsi           |   3 +
 arch/arm64/boot/dts/renesas/r8a77965.dtsi          |   3 +
 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts  |   1 +
 arch/arm64/kernel/probes/kprobes.c                 |   6 +-
 arch/mips/Kconfig                                  |  15 +
 arch/mips/boot/dts/ingenic/ci20.dts                |   8 +-
 arch/mips/boot/dts/ingenic/jz4740.dtsi             |   2 +-
 arch/mips/include/asm/atomic.h                     |   6 +
 arch/mips/include/asm/barrier.h                    |  36 +
 arch/mips/include/asm/bitops.h                     |   5 +
 arch/mips/include/asm/futex.h                      |   3 +
 arch/mips/include/asm/pgtable.h                    |   2 +
 arch/mips/kernel/process.c                         |   7 +-
 arch/mips/loongson64/Platform                      |  23 +
 arch/mips/mm/tlbex.c                               |  10 +
 arch/riscv/include/asm/processor.h                 |   2 +-
 arch/riscv/kernel/setup.c                          |   2 +-
 arch/riscv/mm/init.c                               |   3 +-
 arch/x86/boot/compressed/head_64.S                 |   8 +
 arch/x86/boot/compressed/pgtable.h                 |   2 +-
 arch/x86/events/core.c                             |  13 +-
 arch/x86/events/intel/core.c                       | 154 ++++-
 arch/x86/events/perf_event.h                       |  17 +-
 arch/x86/include/asm/cpufeatures.h                 |   1 +
 arch/x86/include/asm/intel-family.h                |   3 +-
 arch/x86/include/asm/msr-index.h                   |   6 +
 arch/x86/include/asm/page_64_types.h               |   4 +
 arch/x86/kernel/cpu/microcode/amd.c                |   2 +-
 arch/x86/kernel/kexec-bzimage64.c                  |   3 +
 arch/x86/pci/fixup.c                               |  16 +
 arch/xtensa/configs/smp_lx200_defconfig            |   1 +
 arch/xtensa/kernel/head.S                          |   5 +-
 arch/xtensa/kernel/smp.c                           |  41 +-
 arch/xtensa/kernel/time.c                          |   2 +-
 block/blk-iolatency.c                              |  52 +-
 drivers/clk/qcom/gcc-sdm845.c                      |  14 +-
 drivers/clk/ti/divider.c                           |  11 +-
 drivers/dma/at_xdmac.c                             |  19 +-
 drivers/dma/dmatest.c                              |  28 +-
 drivers/firmware/iscsi_ibft.c                      |   1 +
 drivers/gpio/gpio-vf610.c                          |   5 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c             |   3 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c          |  59 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c             |   5 +-
 drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c             |  13 +
 drivers/gpu/drm/amd/amdgpu/soc15.c                 |   6 +-
 drivers/gpu/drm/omapdrm/dss/dsi.c                  |  27 +-
 drivers/gpu/drm/radeon/ci_dpm.c                    |   5 +-
 drivers/gpu/drm/radeon/si_dpm.c                    |   5 +-
 drivers/gpu/drm/sun4i/sun4i_tcon.c                 |   2 +
 drivers/i2c/busses/i2c-omap.c                      |  13 +-
 drivers/infiniband/core/umem_odp.c                 |   3 +
 drivers/infiniband/hw/hfi1/ud.c                    |   1 -
 drivers/infiniband/hw/qib/qib_ud.c                 |   1 -
 drivers/infiniband/ulp/ipoib/ipoib.h               |   1 -
 drivers/infiniband/ulp/ipoib/ipoib_cm.c            |   3 +-
 drivers/input/mouse/elan_i2c_core.c                |   1 +
 drivers/input/tablet/wacom_serial4.c               |   2 +
 drivers/iommu/amd_iommu.c                          |  19 +-
 drivers/irqchip/irq-gic-v3-its.c                   |  69 +-
 drivers/irqchip/irq-mmp.c                          |   6 +-
 drivers/media/rc/rc-main.c                         |  13 +-
 drivers/media/usb/uvc/uvc_driver.c                 |  14 +-
 drivers/net/ethernet/altera/altera_msgdma.c        |   3 +-
 drivers/net/ethernet/cadence/macb.h                |   3 +
 drivers/net/ethernet/cadence/macb_main.c           |  28 +-
 drivers/net/ethernet/hisilicon/hns/hns_enet.c      |   5 +
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c   |  16 +-
 drivers/net/ethernet/hisilicon/hns_mdio.c          |   2 +-
 drivers/net/ethernet/qlogic/qed/qed_dev.c          |   8 +-
 drivers/net/ethernet/qlogic/qed/qed_l2.c           |  17 +-
 drivers/net/ethernet/qlogic/qed/qed_l2.h           |   3 +
 drivers/net/ethernet/qlogic/qed/qed_ll2.c          |  20 +-
 drivers/net/ethernet/qlogic/qed/qed_sp.h           |   1 +
 drivers/net/ethernet/qlogic/qed/qed_spq.c          |  15 +-
 drivers/net/ethernet/qlogic/qed/qed_sriov.c        |  10 +-
 drivers/net/ethernet/qlogic/qed/qed_vf.c           |  10 +
 drivers/net/ethernet/qlogic/qede/qede.h            |   3 +
 drivers/net/ethernet/qlogic/qede/qede_fp.c         |  13 +
 drivers/net/ethernet/qlogic/qede/qede_main.c       |   3 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c     |   4 +-
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   |  14 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  17 +-
 drivers/net/wireless/ath/ath10k/core.c             |   2 +-
 drivers/net/wireless/ath/ath9k/init.c              |   6 +-
 drivers/net/wireless/ti/wlcore/sdio.c              |  15 +-
 drivers/nvme/host/core.c                           |   8 +-
 drivers/nvme/host/nvme.h                           |   1 +
 drivers/nvme/host/pci.c                            |  30 +-
 drivers/pci/pcie/pme.c                             |  27 -
 drivers/pinctrl/pinctrl-mcp23s08.c                 |   7 +-
 drivers/platform/x86/Kconfig                       |   2 +
 drivers/s390/net/qeth_core.h                       |   3 +-
 drivers/s390/net/qeth_core_main.c                  |  31 +-
 drivers/s390/net/qeth_l2_main.c                    |   8 +-
 drivers/s390/net/qeth_l3_main.c                    |   3 +
 drivers/scsi/53c700.c                              |   2 +-
 drivers/scsi/aacraid/commsup.c                     |   5 +-
 drivers/scsi/bnx2fc/bnx2fc_io.c                    |   4 +-
 drivers/scsi/libfc/fc_lport.c                      |   6 +-
 drivers/scsi/libfc/fc_rport.c                      |   1 -
 drivers/scsi/scsi_debug.c                          |  41 +-
 drivers/soc/fsl/qbman/qman.c                       |   9 +-
 drivers/staging/erofs/namei.c                      | 183 ++---
 drivers/usb/dwc3/dwc3-exynos.c                     |   4 +-
 drivers/usb/phy/Kconfig                            |   2 +-
 fs/autofs/expire.c                                 |   3 +-
 fs/autofs/inode.c                                  |   4 +-
 fs/buffer.c                                        |  19 +-
 fs/cifs/smb2pdu.h                                  |   4 +-
 fs/drop_caches.c                                   |   8 +-
 fs/gfs2/glock.c                                    |   2 +-
 fs/iomap.c                                         |  37 +-
 fs/nfs/super.c                                     |   5 +
 fs/proc/generic.c                                  |   4 +-
 fs/proc/internal.h                                 |   1 +
 fs/proc/proc_net.c                                 |  20 +
 include/drm/drm_cache.h                            |  18 +
 include/linux/filter.h                             |  21 +-
 include/linux/irqchip/arm-gic-v3.h                 |   2 +-
 include/linux/signal.h                             |   2 +-
 include/linux/stmmac.h                             |   1 +
 include/net/netfilter/nf_tables.h                  |  17 +-
 kernel/bpf/cgroup.c                                |   2 +-
 kernel/bpf/hashtab.c                               |   4 +-
 kernel/bpf/percpu_freelist.c                       |  41 +-
 kernel/bpf/percpu_freelist.h                       |   4 +
 kernel/bpf/syscall.c                               |  12 +-
 kernel/events/core.c                               |  14 +-
 kernel/relay.c                                     |   4 +-
 kernel/sched/psi.c                                 |  21 +-
 kernel/trace/bpf_trace.c                           |  14 +-
 kernel/workqueue.c                                 |  23 +
 kernel/workqueue_internal.h                        |   6 +-
 lib/test_kmod.c                                    |   2 +-
 mm/memory_hotplug.c                                |  29 +-
 net/batman-adv/bat_v_elp.c                         |   3 +
 net/bridge/netfilter/ebtables.c                    |   9 +-
 net/core/filter.c                                  |   2 +
 net/core/skmsg.c                                   |   4 +-
 net/ipv4/ip_vti.c                                  |  50 ++
 net/netfilter/ipvs/ip_vs_ctl.c                     |  12 +
 net/netfilter/nf_conntrack_core.c                  |  16 +
 net/netfilter/nf_tables_api.c                      |  85 ++-
 net/netfilter/nft_compat.c                         | 177 +++--
 net/netfilter/nft_dynset.c                         |  18 +-
 net/netfilter/nft_immediate.c                      |   6 +-
 net/netfilter/nft_lookup.c                         |  18 +-
 net/netfilter/nft_objref.c                         |  18 +-
 net/vmw_vsock/virtio_transport.c                   |  29 +-
 security/apparmor/domain.c                         |   5 +-
 security/apparmor/lsm.c                            |   2 +
 tools/bpf/bpftool/map.c                            |  16 +
 tools/bpf/bpftool/prog.c                           |   5 +-
 tools/perf/builtin-script.c                        |   9 +-
 tools/perf/builtin-trace.c                         |  25 +-
 tools/perf/util/cpumap.c                           |  11 +-
 tools/perf/util/ordered-events.c                   |   6 +-
 tools/perf/util/setup.py                           |   2 +
 tools/perf/util/symbol-elf.c                       |   9 +-
 tools/testing/selftests/bpf/bpf_util.h             |  30 +-
 .../selftests/cpu-hotplug/cpu-on-off-test.sh       |  13 +-
 tools/testing/selftests/net/Makefile               |   2 +-
 tools/testing/selftests/netfilter/Makefile         |   2 +-
 tools/testing/selftests/netfilter/config           |   2 +-
 tools/testing/selftests/netfilter/nft_nat.sh       | 762 +++++++++++++++++++++
 tools/testing/selftests/proc/.gitignore            |   1 +
 tools/testing/selftests/proc/Makefile              |   1 +
 tools/testing/selftests/proc/setns-dcache.c        | 129 ++++
 tools/testing/selftests/timers/Makefile            |   2 +-
 188 files changed, 2601 insertions(+), 732 deletions(-)

[PATCH 4.20 001/171] media: uvcvideo: Fix type check leading to overflow

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alistair Strachan <astrachan@google.com>

commit 47bb117911b051bbc90764a8bff96543cbd2005f upstream.

When initially testing the Camera Terminal Descriptor wTerminalType
field (buffer[4]), no mask is used. Later in the function, the MSB is
overloaded to store the descriptor subtype, and so a mask of 0x7fff
is used to check the type.

If a descriptor is specially crafted to set this overloaded bit in the
original wTerminalType field, the initial type check will fail (falling
through, without adjusting the buffer size), but the later type checks
will pass, assuming the buffer has been made suitably large, causing an
overflow.

Avoid this problem by checking for the MSB in the wTerminalType field.
If the bit is set, assume the descriptor is bad, and abort parsing it.

Originally reported here:
https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8
A similar (non-compiling) patch was provided at that time.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/uvc/uvc_driver.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -1065,11 +1065,19 @@ static int uvc_parse_standard_control(st
 			return -EINVAL;
 		}
 
-		/* Make sure the terminal type MSB is not null, otherwise it
-		 * could be confused with a unit.
+		/*
+		 * Reject invalid terminal types that would cause issues:
+		 *
+		 * - The high byte must be non-zero, otherwise it would be
+		 *   confused with a unit.
+		 *
+		 * - Bit 15 must be 0, as we use it internally as a terminal
+		 *   direction flag.
+		 *
+		 * Other unknown types are accepted.
 		 */
 		type = get_unaligned_le16(&buffer[4]);
-		if ((type & 0xff00) == 0) {
+		if ((type & 0x7f00) == 0 || (type & 0x8000) != 0) {
 			uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol "
 				"interface %d INPUT_TERMINAL %d has invalid "
 				"type 0x%04x, skipping\n", udev->devnum,

[PATCH 4.20 002/171] vti4: Fix a ipip packet processing bug in IPCOMP virtual tunnel

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit dd9ee3444014e8f28c0eefc9fffc9ac9c5248c12 ]

Recently we run a network test over ipcomp virtual tunnel.We find that
if a ipv4 packet needs fragment, then the peer can't receive
it.

We deep into the code and find that when packet need fragment the smaller
fragment will be encapsulated by ipip not ipcomp. So when the ipip packet
goes into xfrm, it's skb->dev is not properly set. The ipv4 reassembly code
always set skb'dev to the last fragment's dev. After ipv4 defrag processing,
when the kernel rp_filter parameter is set, the skb will be drop by -EXDEV
error.

This patch adds compatible support for the ipip process in ipcomp virtual tunnel.

Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_vti.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index d7b43e700023..68a21bf75dd0 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -74,6 +74,33 @@ static int vti_input(struct sk_buff *skb, int nexthdr, __be32 spi,
 	return 0;
 }
 
+static int vti_input_ipip(struct sk_buff *skb, int nexthdr, __be32 spi,
+		     int encap_type)
+{
+	struct ip_tunnel *tunnel;
+	const struct iphdr *iph = ip_hdr(skb);
+	struct net *net = dev_net(skb->dev);
+	struct ip_tunnel_net *itn = net_generic(net, vti_net_id);
+
+	tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY,
+				  iph->saddr, iph->daddr, 0);
+	if (tunnel) {
+		if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+			goto drop;
+
+		XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip4 = tunnel;
+
+		skb->dev = tunnel->dev;
+
+		return xfrm_input(skb, nexthdr, spi, encap_type);
+	}
+
+	return -EINVAL;
+drop:
+	kfree_skb(skb);
+	return 0;
+}
+
 static int vti_rcv(struct sk_buff *skb)
 {
 	XFRM_SPI_SKB_CB(skb)->family = AF_INET;
@@ -82,6 +109,14 @@ static int vti_rcv(struct sk_buff *skb)
 	return vti_input(skb, ip_hdr(skb)->protocol, 0, 0);
 }
 
+static int vti_rcv_ipip(struct sk_buff *skb)
+{
+	XFRM_SPI_SKB_CB(skb)->family = AF_INET;
+	XFRM_SPI_SKB_CB(skb)->daddroff = offsetof(struct iphdr, daddr);
+
+	return vti_input_ipip(skb, ip_hdr(skb)->protocol, ip_hdr(skb)->saddr, 0);
+}
+
 static int vti_rcv_cb(struct sk_buff *skb, int err)
 {
 	unsigned short family;
@@ -435,6 +470,12 @@ static struct xfrm4_protocol vti_ipcomp4_protocol __read_mostly = {
 	.priority	=	100,
 };
 
+static struct xfrm_tunnel ipip_handler __read_mostly = {
+	.handler	=	vti_rcv_ipip,
+	.err_handler	=	vti4_err,
+	.priority	=	0,
+};
+
 static int __net_init vti_init_net(struct net *net)
 {
 	int err;
@@ -603,6 +644,13 @@ static int __init vti_init(void)
 	if (err < 0)
 		goto xfrm_proto_comp_failed;
 
+	msg = "ipip tunnel";
+	err = xfrm4_tunnel_register(&ipip_handler, AF_INET);
+	if (err < 0) {
+		pr_info("%s: cant't register tunnel\n",__func__);
+		goto xfrm_tunnel_failed;
+	}
+
 	msg = "netlink interface";
 	err = rtnl_link_register(&vti_link_ops);
 	if (err < 0)
@@ -612,6 +660,8 @@ static int __init vti_init(void)
 
 rtnl_link_failed:
 	xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP);
+xfrm_tunnel_failed:
+	xfrm4_tunnel_deregister(&ipip_handler, AF_INET);
 xfrm_proto_comp_failed:
 	xfrm4_protocol_deregister(&vti_ah4_protocol, IPPROTO_AH);
 xfrm_proto_ah_failed:
-- 
2.19.1

[PATCH 4.20 003/171] perf ordered_events: Fix crash in ordered_events__free

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 99d86c8b88393e29cf07c020585f2c8afbcdd97d ]

Song Liu reported crash in 'perf record':

  > #0  0x0000000000500055 in ordered_events(float, long double,...)(...) ()
  > #1  0x0000000000500196 in ordered_events.reinit ()
  > #2  0x00000000004fe413 in perf_session.process_events ()
  > #3  0x0000000000440431 in cmd_record ()
  > #4  0x00000000004a439f in run_builtin ()
  > #5  0x000000000042b3e5 in main ()"

This can happen when we get out of buffers during event processing.

The subsequent ordered_events__free() call assumes oe->buffer != NULL
and crashes. Add a check to prevent that.

Reported-by: Song Liu <liu.song.a23@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Song Liu <liu.song.a23@gmail.com>
Tested-by: Song Liu <liu.song.a23@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190117113017.12977-1-jolsa@kernel.org
Fixes: d5ceb62b3654 ("perf ordered_events: Add 'struct ordered_events_buffer' layer")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/ordered-events.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/ordered-events.c b/tools/perf/util/ordered-events.c
index 1904e7f6ec84..77126a5fa9b6 100644
--- a/tools/perf/util/ordered-events.c
+++ b/tools/perf/util/ordered-events.c
@@ -359,8 +359,10 @@ void ordered_events__free(struct ordered_events *oe)
 	 * Current buffer might not have all the events allocated
 	 * yet, we need to free only allocated ones ...
 	 */
-	list_del(&oe->buffer->list);
-	ordered_events_buffer__free(oe->buffer, oe->buffer_idx, oe);
+	if (oe->buffer) {
+		list_del(&oe->buffer->list);
+		ordered_events_buffer__free(oe->buffer, oe->buffer_idx, oe);
+	}
 
 	/* ... and continue with the rest */
 	list_for_each_entry_safe(buffer, tmp, &oe->to_free, list) {
-- 
2.19.1

[PATCH 4.20 004/171] netfilter: nft_compat: use refcnt_t type for nft_xt reference count

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 12c44aba6618b7f6c437076e5722237190f6cd5f ]

Using standard integer type was fine while all operations on it were
guarded by the nftnl subsys mutex.

This isn't true anymore:
1. transactions are guarded only by a pernet mutex, so concurrent
   rule manipulation in different netns is racy
2. the ->destroy hook runs from a work queue after the transaction
   mutex has been released already.

cpu0                           cpu1 (net 1)        cpu2 (net 2)
 kworker
    nft_compat->destroy        nft_compat->init    nft_compat->init
      if (--nft_xt->ref == 0)   nft_xt->ref++        nft_xt->ref++

Switch to refcount_t.  Doing this however only fixes a minor aspect,
nft_compat also performs linked-list operations in an unsafe way.

This is addressed in the next two patches.

Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_compat.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index c90a4640723f..791f3e693e3d 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -26,7 +26,7 @@
 struct nft_xt {
 	struct list_head	head;
 	struct nft_expr_ops	ops;
-	unsigned int		refcnt;
+	refcount_t		refcnt;
 
 	/* Unlike other expressions, ops doesn't have static storage duration.
 	 * nft core assumes they do.  We use kfree_rcu so that nft core can
@@ -45,7 +45,7 @@ struct nft_xt_match_priv {
 
 static bool nft_xt_put(struct nft_xt *xt)
 {
-	if (--xt->refcnt == 0) {
+	if (refcount_dec_and_test(&xt->refcnt)) {
 		list_del(&xt->head);
 		kfree_rcu(xt, rcu_head);
 		return true;
@@ -273,7 +273,7 @@ nft_target_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		return -EINVAL;
 
 	nft_xt = container_of(expr->ops, struct nft_xt, ops);
-	nft_xt->refcnt++;
+	refcount_inc(&nft_xt->refcnt);
 	return 0;
 }
 
@@ -487,7 +487,7 @@ __nft_match_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		return ret;
 
 	nft_xt = container_of(expr->ops, struct nft_xt, ops);
-	nft_xt->refcnt++;
+	refcount_inc(&nft_xt->refcnt);
 	return 0;
 }
 
@@ -790,7 +790,7 @@ nft_match_select_ops(const struct nft_ctx *ctx,
 		goto err;
 	}
 
-	nft_match->refcnt = 0;
+	refcount_set(&nft_match->refcnt, 0);
 	nft_match->ops.type = &nft_match_type;
 	nft_match->ops.eval = nft_match_eval;
 	nft_match->ops.init = nft_match_init;
@@ -894,7 +894,7 @@ nft_target_select_ops(const struct nft_ctx *ctx,
 		goto err;
 	}
 
-	nft_target->refcnt = 0;
+	refcount_set(&nft_target->refcnt, 0);
 	nft_target->ops.type = &nft_target_type;
 	nft_target->ops.size = NFT_EXPR_SIZE(XT_ALIGN(target->targetsize));
 	nft_target->ops.init = nft_target_init;
@@ -965,7 +965,7 @@ static void __exit nft_compat_module_exit(void)
 	list_for_each_entry_safe(xt, next, &nft_target_list, head) {
 		struct xt_target *target = xt->ops.data;
 
-		if (WARN_ON_ONCE(xt->refcnt))
+		if (WARN_ON_ONCE(refcount_read(&xt->refcnt)))
 			continue;
 		module_put(target->me);
 		kfree(xt);
@@ -974,7 +974,7 @@ static void __exit nft_compat_module_exit(void)
 	list_for_each_entry_safe(xt, next, &nft_match_list, head) {
 		struct xt_match *match = xt->ops.data;
 
-		if (WARN_ON_ONCE(xt->refcnt))
+		if (WARN_ON_ONCE(refcount_read(&xt->refcnt)))
 			continue;
 		module_put(match->me);
 		kfree(xt);
-- 
2.19.1

[PATCH 4.20 005/171] netfilter: nft_compat: make lists per netns

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit cf52572ebbd7189a1966c2b5fc34b97078cd1dce ]

There are two problems with nft_compat since the netlink config
plane uses a per-netns mutex:

1. Concurrent add/del accesses to the same list
2. accesses to a list element after it has been free'd already.

This patch fixes the first problem.

Freeing occurs from a work queue, after transaction mutexes have been
released, i.e., it still possible for a new transaction (even from
same net ns) to find the to-be-deleted expression in the list.

The ->destroy functions are not allowed to have any such side effects,
i.e. the list_del() in the destroy function is not allowed.

This part of the problem is solved in the next patch.
I tried to make this work by serializing list access via mutex
and by moving list_del() to a deactivate callback, but
Taehee spotted following race on this approach:

  NET #0                          NET #1
   >select_ops()
   ->init()
                                   ->select_ops()
   ->deactivate()
   ->destroy()
      nft_xt_put()
       kfree_rcu(xt, rcu_head);
                                   ->init() <-- use-after-free occurred.

Unfortunately, we can't increment reference count in
select_ops(), because we can't undo the refcount increase in
case a different expression fails in the same batch.

(The destroy hook will only be called in case the expression
 was initialized successfully).

Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_compat.c | 129 +++++++++++++++++++++++++------------
 1 file changed, 89 insertions(+), 40 deletions(-)

diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index 791f3e693e3d..d3412138e000 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -22,6 +22,7 @@
 #include <linux/netfilter_bridge/ebtables.h>
 #include <linux/netfilter_arp/arp_tables.h>
 #include <net/netfilter/nf_tables.h>
+#include <net/netns/generic.h>
 
 struct nft_xt {
 	struct list_head	head;
@@ -43,6 +44,20 @@ struct nft_xt_match_priv {
 	void *info;
 };
 
+struct nft_compat_net {
+	struct list_head nft_target_list;
+	struct list_head nft_match_list;
+};
+
+static unsigned int nft_compat_net_id __read_mostly;
+static struct nft_expr_type nft_match_type;
+static struct nft_expr_type nft_target_type;
+
+static struct nft_compat_net *nft_compat_pernet(struct net *net)
+{
+	return net_generic(net, nft_compat_net_id);
+}
+
 static bool nft_xt_put(struct nft_xt *xt)
 {
 	if (refcount_dec_and_test(&xt->refcnt)) {
@@ -735,10 +750,6 @@ static const struct nfnetlink_subsystem nfnl_compat_subsys = {
 	.cb		= nfnl_nft_compat_cb,
 };
 
-static LIST_HEAD(nft_match_list);
-
-static struct nft_expr_type nft_match_type;
-
 static bool nft_match_cmp(const struct xt_match *match,
 			  const char *name, u32 rev, u32 family)
 {
@@ -750,6 +761,7 @@ static const struct nft_expr_ops *
 nft_match_select_ops(const struct nft_ctx *ctx,
 		     const struct nlattr * const tb[])
 {
+	struct nft_compat_net *cn;
 	struct nft_xt *nft_match;
 	struct xt_match *match;
 	unsigned int matchsize;
@@ -766,8 +778,10 @@ nft_match_select_ops(const struct nft_ctx *ctx,
 	rev = ntohl(nla_get_be32(tb[NFTA_MATCH_REV]));
 	family = ctx->family;
 
+	cn = nft_compat_pernet(ctx->net);
+
 	/* Re-use the existing match if it's already loaded. */
-	list_for_each_entry(nft_match, &nft_match_list, head) {
+	list_for_each_entry(nft_match, &cn->nft_match_list, head) {
 		struct xt_match *match = nft_match->ops.data;
 
 		if (nft_match_cmp(match, mt_name, rev, family))
@@ -811,7 +825,7 @@ nft_match_select_ops(const struct nft_ctx *ctx,
 
 	nft_match->ops.size = matchsize;
 
-	list_add(&nft_match->head, &nft_match_list);
+	list_add(&nft_match->head, &cn->nft_match_list);
 
 	return &nft_match->ops;
 err:
@@ -827,10 +841,6 @@ static struct nft_expr_type nft_match_type __read_mostly = {
 	.owner		= THIS_MODULE,
 };
 
-static LIST_HEAD(nft_target_list);
-
-static struct nft_expr_type nft_target_type;
-
 static bool nft_target_cmp(const struct xt_target *tg,
 			   const char *name, u32 rev, u32 family)
 {
@@ -842,6 +852,7 @@ static const struct nft_expr_ops *
 nft_target_select_ops(const struct nft_ctx *ctx,
 		      const struct nlattr * const tb[])
 {
+	struct nft_compat_net *cn;
 	struct nft_xt *nft_target;
 	struct xt_target *target;
 	char *tg_name;
@@ -862,8 +873,9 @@ nft_target_select_ops(const struct nft_ctx *ctx,
 	    strcmp(tg_name, "standard") == 0)
 		return ERR_PTR(-EINVAL);
 
+	cn = nft_compat_pernet(ctx->net);
 	/* Re-use the existing target if it's already loaded. */
-	list_for_each_entry(nft_target, &nft_target_list, head) {
+	list_for_each_entry(nft_target, &cn->nft_target_list, head) {
 		struct xt_target *target = nft_target->ops.data;
 
 		if (!target->target)
@@ -908,7 +920,7 @@ nft_target_select_ops(const struct nft_ctx *ctx,
 	else
 		nft_target->ops.eval = nft_target_eval_xt;
 
-	list_add(&nft_target->head, &nft_target_list);
+	list_add(&nft_target->head, &cn->nft_target_list);
 
 	return &nft_target->ops;
 err:
@@ -924,13 +936,74 @@ static struct nft_expr_type nft_target_type __read_mostly = {
 	.owner		= THIS_MODULE,
 };
 
+static int __net_init nft_compat_init_net(struct net *net)
+{
+	struct nft_compat_net *cn = nft_compat_pernet(net);
+
+	INIT_LIST_HEAD(&cn->nft_target_list);
+	INIT_LIST_HEAD(&cn->nft_match_list);
+
+	return 0;
+}
+
+static void __net_exit nft_compat_exit_net(struct net *net)
+{
+	struct nft_compat_net *cn = nft_compat_pernet(net);
+	struct nft_xt *xt, *next;
+
+	if (list_empty(&cn->nft_match_list) &&
+	    list_empty(&cn->nft_target_list))
+		return;
+
+	/* If there was an error that caused nft_xt expr to not be initialized
+	 * fully and noone else requested the same expression later, the lists
+	 * contain 0-refcount entries that still hold module reference.
+	 *
+	 * Clean them here.
+	 */
+	mutex_lock(&net->nft.commit_mutex);
+	list_for_each_entry_safe(xt, next, &cn->nft_target_list, head) {
+		struct xt_target *target = xt->ops.data;
+
+		list_del_init(&xt->head);
+
+		if (refcount_read(&xt->refcnt))
+			continue;
+		module_put(target->me);
+		kfree(xt);
+	}
+
+	list_for_each_entry_safe(xt, next, &cn->nft_match_list, head) {
+		struct xt_match *match = xt->ops.data;
+
+		list_del_init(&xt->head);
+
+		if (refcount_read(&xt->refcnt))
+			continue;
+		module_put(match->me);
+		kfree(xt);
+	}
+	mutex_unlock(&net->nft.commit_mutex);
+}
+
+static struct pernet_operations nft_compat_net_ops = {
+	.init	= nft_compat_init_net,
+	.exit	= nft_compat_exit_net,
+	.id	= &nft_compat_net_id,
+	.size	= sizeof(struct nft_compat_net),
+};
+
 static int __init nft_compat_module_init(void)
 {
 	int ret;
 
+	ret = register_pernet_subsys(&nft_compat_net_ops);
+	if (ret < 0)
+		goto err_target;
+
 	ret = nft_register_expr(&nft_match_type);
 	if (ret < 0)
-		return ret;
+		goto err_pernet;
 
 	ret = nft_register_expr(&nft_target_type);
 	if (ret < 0)
@@ -943,45 +1016,21 @@ static int __init nft_compat_module_init(void)
 	}
 
 	return ret;
-
 err_target:
 	nft_unregister_expr(&nft_target_type);
 err_match:
 	nft_unregister_expr(&nft_match_type);
+err_pernet:
+	unregister_pernet_subsys(&nft_compat_net_ops);
 	return ret;
 }
 
 static void __exit nft_compat_module_exit(void)
 {
-	struct nft_xt *xt, *next;
-
-	/* list should be empty here, it can be non-empty only in case there
-	 * was an error that caused nft_xt expr to not be initialized fully
-	 * and noone else requested the same expression later.
-	 *
-	 * In this case, the lists contain 0-refcount entries that still
-	 * hold module reference.
-	 */
-	list_for_each_entry_safe(xt, next, &nft_target_list, head) {
-		struct xt_target *target = xt->ops.data;
-
-		if (WARN_ON_ONCE(refcount_read(&xt->refcnt)))
-			continue;
-		module_put(target->me);
-		kfree(xt);
-	}
-
-	list_for_each_entry_safe(xt, next, &nft_match_list, head) {
-		struct xt_match *match = xt->ops.data;
-
-		if (WARN_ON_ONCE(refcount_read(&xt->refcnt)))
-			continue;
-		module_put(match->me);
-		kfree(xt);
-	}
 	nfnetlink_subsys_unregister(&nfnl_compat_subsys);
 	nft_unregister_expr(&nft_target_type);
 	nft_unregister_expr(&nft_match_type);
+	unregister_pernet_subsys(&nft_compat_net_ops);
 }
 
 MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_NFT_COMPAT);
-- 
2.19.1

[PATCH 4.20 006/171] netfilter: nft_compat: destroy function must not have side effects

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b2e3d68d1251a051a620f9086e18f7ffa6833b5b ]

The nft_compat destroy function deletes the nft_xt object from a list.
This isn't allowed anymore. Destroy functions are called asynchronously,
i.e. next batch can find the object that has a pending ->destroy()
invocation:

cpu0                       cpu1
 worker
   ->destroy               for_each_entry()
	                     if (x == ...
			        return x->ops;
     list_del(x)
     kfree_rcu(x)
                           expr->ops->... // ops was free'd

To resolve this, the list_del needs to occur before the transaction
mutex gets released.  nf_tables has a 'deactivate' hook for this
purpose, so use that to unlink the object from the list.

Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_compat.c | 48 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 47 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index d3412138e000..a354e9771697 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -29,6 +29,9 @@ struct nft_xt {
 	struct nft_expr_ops	ops;
 	refcount_t		refcnt;
 
+	/* used only when transaction mutex is locked */
+	unsigned int		listcnt;
+
 	/* Unlike other expressions, ops doesn't have static storage duration.
 	 * nft core assumes they do.  We use kfree_rcu so that nft core can
 	 * can check expr->ops->size even after nft_compat->destroy() frees
@@ -61,7 +64,7 @@ static struct nft_compat_net *nft_compat_pernet(struct net *net)
 static bool nft_xt_put(struct nft_xt *xt)
 {
 	if (refcount_dec_and_test(&xt->refcnt)) {
-		list_del(&xt->head);
+		WARN_ON_ONCE(!list_empty(&xt->head));
 		kfree_rcu(xt, rcu_head);
 		return true;
 	}
@@ -556,6 +559,43 @@ nft_match_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr)
 	__nft_match_destroy(ctx, expr, nft_expr_priv(expr));
 }
 
+static void nft_compat_activate(const struct nft_ctx *ctx,
+				const struct nft_expr *expr,
+				struct list_head *h)
+{
+	struct nft_xt *xt = container_of(expr->ops, struct nft_xt, ops);
+
+	if (xt->listcnt == 0)
+		list_add(&xt->head, h);
+
+	xt->listcnt++;
+}
+
+static void nft_compat_activate_mt(const struct nft_ctx *ctx,
+				   const struct nft_expr *expr)
+{
+	struct nft_compat_net *cn = nft_compat_pernet(ctx->net);
+
+	nft_compat_activate(ctx, expr, &cn->nft_match_list);
+}
+
+static void nft_compat_activate_tg(const struct nft_ctx *ctx,
+				   const struct nft_expr *expr)
+{
+	struct nft_compat_net *cn = nft_compat_pernet(ctx->net);
+
+	nft_compat_activate(ctx, expr, &cn->nft_target_list);
+}
+
+static void nft_compat_deactivate(const struct nft_ctx *ctx,
+				  const struct nft_expr *expr)
+{
+	struct nft_xt *xt = container_of(expr->ops, struct nft_xt, ops);
+
+	if (--xt->listcnt == 0)
+		list_del_init(&xt->head);
+}
+
 static void
 nft_match_large_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr)
 {
@@ -809,6 +849,8 @@ nft_match_select_ops(const struct nft_ctx *ctx,
 	nft_match->ops.eval = nft_match_eval;
 	nft_match->ops.init = nft_match_init;
 	nft_match->ops.destroy = nft_match_destroy;
+	nft_match->ops.activate = nft_compat_activate_mt;
+	nft_match->ops.deactivate = nft_compat_deactivate;
 	nft_match->ops.dump = nft_match_dump;
 	nft_match->ops.validate = nft_match_validate;
 	nft_match->ops.data = match;
@@ -825,6 +867,7 @@ nft_match_select_ops(const struct nft_ctx *ctx,
 
 	nft_match->ops.size = matchsize;
 
+	nft_match->listcnt = 1;
 	list_add(&nft_match->head, &cn->nft_match_list);
 
 	return &nft_match->ops;
@@ -911,6 +954,8 @@ nft_target_select_ops(const struct nft_ctx *ctx,
 	nft_target->ops.size = NFT_EXPR_SIZE(XT_ALIGN(target->targetsize));
 	nft_target->ops.init = nft_target_init;
 	nft_target->ops.destroy = nft_target_destroy;
+	nft_target->ops.activate = nft_compat_activate_tg;
+	nft_target->ops.deactivate = nft_compat_deactivate;
 	nft_target->ops.dump = nft_target_dump;
 	nft_target->ops.validate = nft_target_validate;
 	nft_target->ops.data = target;
@@ -920,6 +965,7 @@ nft_target_select_ops(const struct nft_ctx *ctx,
 	else
 		nft_target->ops.eval = nft_target_eval_xt;
 
+	nft_target->listcnt = 1;
 	list_add(&nft_target->head, &cn->nft_target_list);
 
 	return &nft_target->ops;
-- 
2.19.1

[PATCH 4.20 007/171] perf script: Fix crash with printing mixed trace point and other events

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 96167167b6e17b25c0e05ecc31119b73baeab094 ]

'perf script' crashes currently when printing mixed trace points and
other events because the trace format does not handle events without
trace meta data. Add a simple check to avoid that.

  % cat > test.c
  main()
  {
      printf("Hello world\n");
  }
  ^D
  % gcc -g -o test test.c
  % sudo perf probe -x test 'test.c:3'
  % perf record -e '{cpu/cpu-cycles,period=10000/,probe_test:main}:S' ./test
  % perf script
  <segfault>

Committer testing:

Before:

  # perf probe -x /lib64/libc-2.28.so malloc
  Added new event:
    probe_libc:malloc    (on malloc in /usr/lib64/libc-2.28.so)

  You can now use it in all perf tools, such as:

	perf record -e probe_libc:malloc -aR sleep 1

  # perf probe -l
  probe_libc:malloc    (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.28.so)
  # perf record -e '{cpu/cpu-cycles,period=10000/,probe_libc:*}:S' sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.023 MB perf.data (40 samples) ]
  # perf script
  Segmentation fault (core dumped)
  ^C
  #

After:

  # perf script | head -6
     sleep 2888 94796.944981: 16198 cpu/cpu-cycles,period=10000/: ffffffff925dc04f get_random_u32+0x1f (/lib/modules/5.0.0-rc2+/build/vmlinux)
     sleep 2888 [-01] 94796.944981: probe_libc:malloc:
     sleep 2888 94796.944983:  4713 cpu/cpu-cycles,period=10000/: ffffffff922763af change_protection+0xcf (/lib/modules/5.0.0-rc2+/build/vmlinux)
     sleep 2888 [-01] 94796.944983: probe_libc:malloc:
     sleep 2888 94796.944986:  9934 cpu/cpu-cycles,period=10000/: ffffffff922777e0 move_page_tables+0x0 (/lib/modules/5.0.0-rc2+/build/vmlinux)
     sleep 2888 [-01] 94796.944986: probe_libc:malloc:
  #

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190117194834.21940-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-script.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index a7b4d3f611c5..5c070a600233 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -1746,7 +1746,7 @@ static void process_event(struct perf_script *script,
 		return;
 	}
 
-	if (PRINT_FIELD(TRACE)) {
+	if (PRINT_FIELD(TRACE) && sample->raw_data) {
 		event_format__fprintf(evsel->tp_format, sample->cpu,
 				      sample->raw_data, sample->raw_size, fp);
 	}
-- 
2.19.1

[PATCH 4.20 008/171] perf core: Fix perf_proc_update_handler() bug

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1a51c5da5acc6c188c917ba572eebac5f8793432 ]

The perf_proc_update_handler() handles /proc/sys/kernel/perf_event_max_sample_rate
syctl variable.  When the PMU IRQ handler timing monitoring is disabled, i.e,
when /proc/sys/kernel/perf_cpu_time_max_percent is equal to 0 or 100,
then no modification to sysctl_perf_event_sample_rate is allowed to prevent
possible hang from wrong values.

The problem is that the test to prevent modification is made after the
sysctl variable is modified in perf_proc_update_handler().

You get an error:

  $ echo 10001 >/proc/sys/kernel/perf_event_max_sample_rate
  echo: write error: invalid argument

But the value is still modified causing all sorts of inconsistencies:

  $ cat /proc/sys/kernel/perf_event_max_sample_rate
  10001

This patch fixes the problem by moving the parsing of the value after
the test.

Committer testing:

  # echo 100 > /proc/sys/kernel/perf_cpu_time_max_percent
  # echo 10001 > /proc/sys/kernel/perf_event_max_sample_rate
  -bash: echo: write error: Invalid argument
  # cat /proc/sys/kernel/perf_event_max_sample_rate
  10001
  #

Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1547169436-6266-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 699bc25d6204..18997730b665 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -436,18 +436,18 @@ int perf_proc_update_handler(struct ctl_table *table, int write,
 		void __user *buffer, size_t *lenp,
 		loff_t *ppos)
 {
-	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
-
-	if (ret || !write)
-		return ret;
-
+	int ret;
+	int perf_cpu = sysctl_perf_cpu_time_max_percent;
 	/*
 	 * If throttling is disabled don't allow the write:
 	 */
-	if (sysctl_perf_cpu_time_max_percent == 100 ||
-	    sysctl_perf_cpu_time_max_percent == 0)
+	if (write && (perf_cpu == 100 || perf_cpu == 0))
 		return -EINVAL;
 
+	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+	if (ret || !write)
+		return ret;
+
 	max_samples_per_tick = DIV_ROUND_UP(sysctl_perf_event_sample_rate, HZ);
 	perf_sample_period_ns = NSEC_PER_SEC / sysctl_perf_event_sample_rate;
 	update_perf_cpu_limits();
-- 
2.19.1

[PATCH 4.20 009/171] perf python: Remove -fstack-clash-protection when building with some clang versions

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 94ec1eb711db69be1414b56b3160b816e86a5c5b ]

These options are not present in some (all?) clang versions, so when we
build for a distro that has a gcc new enough to have these options and
that the distro python build config settings use them but clang doesn't
support, b00m.

This is the case with fedora rawhide (now gearing towards f30), so check
if clang has the  and remove the missing ones from CFLAGS.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5q50q9w458yawgxf9ez54jbp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/setup.py | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py
index 63f758c655d5..64d1f36dee99 100644
--- a/tools/perf/util/setup.py
+++ b/tools/perf/util/setup.py
@@ -17,6 +17,8 @@ if cc == "clang":
             vars[var] = sub("-mcet", "", vars[var])
         if not clang_has_option("-fcf-protection"):
             vars[var] = sub("-fcf-protection", "", vars[var])
+        if not clang_has_option("-fstack-clash-protection"):
+            vars[var] = sub("-fstack-clash-protection", "", vars[var])
 
 from distutils.core import setup, Extension
 
-- 
2.19.1

[PATCH 4.20 010/171] perf tools: Handle TOPOLOGY headers with no CPU

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1497e804d1a6e2bd9107ddf64b0310449f4673eb ]

This patch fixes an issue in cpumap.c when used with the TOPOLOGY
header. In some configurations, some NUMA nodes may have no CPU (empty
cpulist). Yet a cpumap map must be created otherwise perf abort with an
error. This patch handles this case by creating a dummy map.

  Before:

  $ perf record -o - -e cycles noploop 2 | perf script -i -
  0x6e8 [0x6c]: failed to process type: 80

  After:

  $ perf record -o - -e cycles noploop 2 | perf script -i -
  noploop for 2 seconds

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1547885559-1657-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/cpumap.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c
index 1ccbd3342069..383674f448fc 100644
--- a/tools/perf/util/cpumap.c
+++ b/tools/perf/util/cpumap.c
@@ -134,7 +134,12 @@ struct cpu_map *cpu_map__new(const char *cpu_list)
 	if (!cpu_list)
 		return cpu_map__read_all_cpu_map();
 
-	if (!isdigit(*cpu_list))
+	/*
+	 * must handle the case of empty cpumap to cover
+	 * TOPOLOGY header for NUMA nodes with no CPU
+	 * ( e.g., because of CPU hotplug)
+	 */
+	if (!isdigit(*cpu_list) && *cpu_list != '\0')
 		goto out;
 
 	while (isdigit(*cpu_list)) {
@@ -181,8 +186,10 @@ struct cpu_map *cpu_map__new(const char *cpu_list)
 
 	if (nr_cpus > 0)
 		cpus = cpu_map__trim_new(nr_cpus, tmp_cpus);
-	else
+	else if (*cpu_list != '\0')
 		cpus = cpu_map__default_new();
+	else
+		cpus = cpu_map__dummy_new();
 invalid:
 	free(tmp_cpus);
 out:
-- 
2.19.1

[PATCH 4.20 011/171] perf script: Fix crash when processing recorded stat data

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8bf8c6da53c2265aea365a1de6038f118f522113 ]

While updating perf to work with Python3 and Python2 I noticed that the
stat-cpi script was dumping core.

$ perf  stat -e cycles,instructions record -o /tmp/perf.data /bin/false

 Performance counter stats for '/bin/false':

           802,148      cycles

           604,622      instructions                                                       802,148      cycles
           604,622      instructions

       0.001445842 seconds time elapsed

$ perf script -i /tmp/perf.data -s scripts/python/stat-cpi.py
Segmentation fault (core dumped)
...
...
    rblist=rblist@entry=0xb2a200 <rt_stat>,
    new_entry=new_entry@entry=0x7ffcb755c310) at util/rblist.c:33
    ctx=<optimized out>, type=<optimized out>, create=<optimized out>,
    cpu=<optimized out>, evsel=<optimized out>) at util/stat-shadow.c:118
    ctx=<optimized out>, type=<optimized out>, st=<optimized out>)
    at util/stat-shadow.c:196
    count=count@entry=727442, cpu=cpu@entry=0, st=0xb2a200 <rt_stat>)
    at util/stat-shadow.c:239
    config=config@entry=0xafeb40 <stat_config>,
    counter=counter@entry=0x133c6e0) at util/stat.c:372
...
...

The issue is that since 1fcd03946b52 perf_stat__update_shadow_stats now calls
update_runtime_stat passing rt_stat rather than calling update_stats but
perf_stat__init_shadow_stats has never been called to initialize rt_stat in
the script path processing recorded stat data.

Since I can't see any reason why perf_stat__init_shadow_stats() is presently
initialized like it is in builtin-script.c::perf_sample__fprint_metric()
[4bd1bef8bba2f] I'm proposing it instead be initialized once in __cmd_script

Committer testing:

After applying the patch:

  # perf script -i /tmp/perf.data -s tools/perf/scripts/python/stat-cpi.py
       0.001970: cpu -1, thread -1 -> cpi 1.709079 (1075684/629394)
  #

No segfault.

Signed-off-by: Tony Jones <tonyj@suse.de>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Fixes: 1fcd03946b52 ("perf stat: Update per-thread shadow stats")
Link: http://lkml.kernel.org/r/20190120191414.12925-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-script.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index 5c070a600233..d8791e0e5f75 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -1633,13 +1633,8 @@ static void perf_sample__fprint_metric(struct perf_script *script,
 		.force_header = false,
 	};
 	struct perf_evsel *ev2;
-	static bool init;
 	u64 val;
 
-	if (!init) {
-		perf_stat__init_shadow_stats();
-		init = true;
-	}
 	if (!evsel->stats)
 		perf_evlist__alloc_stats(script->session->evlist, false);
 	if (evsel_script(evsel->leader)->gnum++ == 0)
@@ -2305,6 +2300,8 @@ static int __cmd_script(struct perf_script *script)
 
 	signal(SIGINT, sig_handler);
 
+	perf_stat__init_shadow_stats();
+
 	/* override event processing functions */
 	if (script->show_task_events) {
 		script->tool.comm = process_comm_event;
-- 
2.19.1

[PATCH 4.20 012/171] IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMM

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 904bba211acc2112fdf866e5a2bc6cd9ecd0de1b ]

The work completion length for a receiving a UD send with immediate is
short by 4 bytes causing application using this opcode to fail.

The UD receive logic incorrectly subtracts 4 bytes for immediate
value. These bytes are already included in header length and are used to
calculate header/payload split, so the result is these 4 bytes are
subtracted twice, once when the header length subtracted from the overall
length and once again in the UD opcode specific path.

Remove the extra subtraction when handling the opcode.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/ud.c    | 1 -
 drivers/infiniband/hw/qib/qib_ud.c | 1 -
 2 files changed, 2 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/ud.c b/drivers/infiniband/hw/hfi1/ud.c
index 4baa8f4d49de..46bf74375ea6 100644
--- a/drivers/infiniband/hw/hfi1/ud.c
+++ b/drivers/infiniband/hw/hfi1/ud.c
@@ -980,7 +980,6 @@ void hfi1_ud_rcv(struct hfi1_packet *packet)
 	    opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
 		wc.ex.imm_data = packet->ohdr->u.ud.imm_data;
 		wc.wc_flags = IB_WC_WITH_IMM;
-		tlen -= sizeof(u32);
 	} else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
 		wc.ex.imm_data = 0;
 		wc.wc_flags = 0;
diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c
index 4d4c31ea4e2d..90268b838d4e 100644
--- a/drivers/infiniband/hw/qib/qib_ud.c
+++ b/drivers/infiniband/hw/qib/qib_ud.c
@@ -513,7 +513,6 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct ib_header *hdr,
 	    opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
 		wc.ex.imm_data = ohdr->u.ud.imm_data;
 		wc.wc_flags = IB_WC_WITH_IMM;
-		tlen -= sizeof(u32);
 	} else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
 		wc.ex.imm_data = 0;
 		wc.wc_flags = 0;
-- 
2.19.1

[PATCH 4.20 013/171] iommu/amd: Call free_iova_fast with pfn in map_sg

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 51d8838d66d3249508940d8f59b07701f2129723 ]

In the error path of map_sg, free_iova_fast is being called with
address instead of the pfn. This results in a bad value getting into
the rcache, and can result in hitting a BUG_ON when
iova_magazine_free_pfns is called.

Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: 80187fd39dcb ("iommu/amd: Optimize map_sg and unmap_sg")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 325f3bad118b..5f33f843d30a 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -2561,7 +2561,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 	}
 
 out_free_iova:
-	free_iova_fast(&dma_dom->iovad, address, npages);
+	free_iova_fast(&dma_dom->iovad, address >> PAGE_SHIFT, npages);
 
 out_err:
 	return 0;
-- 
2.19.1

[PATCH 4.20 014/171] iommu/amd: Unmap all mapped pages in error path of map_sg

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f1724c0883bb0ce93b8dcb94b53dcca3b75ac9a7 ]

In the error path of map_sg there is an incorrect if condition
for breaking out of the loop that searches the scatterlist
for mapped pages to unmap. Instead of breaking out of the
loop once all the pages that were mapped have been unmapped,
it will break out of the loop after it has unmapped 1 page.
Fix the condition, so it breaks out of the loop only after
all the mapped pages have been unmapped.

Fixes: 80187fd39dcb ("iommu/amd: Optimize map_sg and unmap_sg")
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 5f33f843d30a..ca3a250d8fa7 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -2555,7 +2555,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 			bus_addr  = address + s->dma_address + (j << PAGE_SHIFT);
 			iommu_unmap_page(domain, bus_addr, PAGE_SIZE);
 
-			if (--mapped_pages)
+			if (--mapped_pages == 0)
 				goto out_free_iova;
 		}
 	}
-- 
2.19.1

[PATCH 4.20 015/171] riscv: fixup max_low_pfn with PFN_DOWN.

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 28198c4639b39899a728ac89aea29d2a7a72562f ]

max_low_pfn should be pfn_size not byte_size.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <mao_han@c-sky.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/setup.c | 2 +-
 arch/riscv/mm/init.c      | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 2c290e6aaa6e..6d652826b5cb 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -196,7 +196,7 @@ static void __init setup_bootmem(void)
 	BUG_ON(mem_size == 0);
 
 	set_max_mapnr(PFN_DOWN(mem_size));
-	max_low_pfn = memblock_end_of_DRAM();
+	max_low_pfn = PFN_DOWN(memblock_end_of_DRAM());
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	setup_initrd();
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 1d9bfaff60bc..658ebf645f42 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -28,7 +28,8 @@ static void __init zone_sizes_init(void)
 	unsigned long max_zone_pfns[MAX_NR_ZONES] = { 0, };
 
 #ifdef CONFIG_ZONE_DMA32
-	max_zone_pfns[ZONE_DMA32] = PFN_DOWN(min(4UL * SZ_1G, max_low_pfn));
+	max_zone_pfns[ZONE_DMA32] = PFN_DOWN(min(4UL * SZ_1G,
+			(unsigned long) PFN_PHYS(max_low_pfn)));
 #endif
 	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
 
-- 
2.19.1

[PATCH 4.20 016/171] ipvs: Fix signed integer overflow when setsockopt timeout

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 53ab60baa1ac4f20b080a22c13b77b6373922fd7 ]

There is a UBSAN bug report as below:
UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21
signed integer overflow:
-2147483647 * 1000 cannot be represented in type 'int'

Reproduce program:
	#include <stdio.h>
	#include <sys/types.h>
	#include <sys/socket.h>

	#define IPPROTO_IP 0
	#define IPPROTO_RAW 255

	#define IP_VS_BASE_CTL		(64+1024+64)
	#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)

	/* The argument to IP_VS_SO_GET_TIMEOUT */
	struct ipvs_timeout_t {
		int tcp_timeout;
		int tcp_fin_timeout;
		int udp_timeout;
	};

	int main() {
		int ret = -1;
		int sockfd = -1;
		struct ipvs_timeout_t to;

		sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW);
		if (sockfd == -1) {
			printf("socket init error\n");
			return -1;
		}

		to.tcp_timeout = -2147483647;
		to.tcp_fin_timeout = -2147483647;
		to.udp_timeout = -2147483647;

		ret = setsockopt(sockfd,
				 IPPROTO_IP,
				 IP_VS_SO_SET_TIMEOUT,
				 (char *)(&to),
				 sizeof(to));

		printf("setsockopt return %d\n", ret);
		return ret;
	}

Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'.

Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_ctl.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 432141f04af3..7d6318664eb2 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2220,6 +2220,18 @@ static int ip_vs_set_timeout(struct netns_ipvs *ipvs, struct ip_vs_timeout_user
 		  u->tcp_fin_timeout,
 		  u->udp_timeout);
 
+#ifdef CONFIG_IP_VS_PROTO_TCP
+	if (u->tcp_timeout < 0 || u->tcp_timeout > (INT_MAX / HZ) ||
+	    u->tcp_fin_timeout < 0 || u->tcp_fin_timeout > (INT_MAX / HZ)) {
+		return -EINVAL;
+	}
+#endif
+
+#ifdef CONFIG_IP_VS_PROTO_UDP
+	if (u->udp_timeout < 0 || u->udp_timeout > (INT_MAX / HZ))
+		return -EINVAL;
+#endif
+
 #ifdef CONFIG_IP_VS_PROTO_TCP
 	if (u->tcp_timeout) {
 		pd = ip_vs_proto_data_get(ipvs, IPPROTO_TCP);
-- 
2.19.1

[PATCH 4.20 017/171] iommu/amd: Fix IOMMU page flush when detach device from a domain

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 9825bd94e3a2baae1f4874767ae3a7d4c049720e ]

When a VM is terminated, the VFIO driver detaches all pass-through
devices from VFIO domain by clearing domain id and page table root
pointer from each device table entry (DTE), and then invalidates
the DTE. Then, the VFIO driver unmap pages and invalidate IOMMU pages.

Currently, the IOMMU driver keeps track of which IOMMU and how many
devices are attached to the domain. When invalidate IOMMU pages,
the driver checks if the IOMMU is still attached to the domain before
issuing the invalidate page command.

However, since VFIO has already detached all devices from the domain,
the subsequent INVALIDATE_IOMMU_PAGES commands are being skipped as
there is no IOMMU attached to the domain. This results in data
corruption and could cause the PCI device to end up in indeterministic
state.

Fix this by invalidate IOMMU pages when detach a device, and
before decrementing the per-domain device reference counts.

Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: Joerg Roedel <joro@8bytes.org>
Co-developed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Fixes: 6de8ad9b9ee0 ('x86/amd-iommu: Make iommu_flush_pages aware of multiple IOMMUs')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index ca3a250d8fa7..4d2c5d4f586f 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1929,16 +1929,13 @@ static void do_attach(struct iommu_dev_data *dev_data,
 
 static void do_detach(struct iommu_dev_data *dev_data)
 {
+	struct protection_domain *domain = dev_data->domain;
 	struct amd_iommu *iommu;
 	u16 alias;
 
 	iommu = amd_iommu_rlookup_table[dev_data->devid];
 	alias = dev_data->alias;
 
-	/* decrease reference counters */
-	dev_data->domain->dev_iommu[iommu->index] -= 1;
-	dev_data->domain->dev_cnt                 -= 1;
-
 	/* Update data structures */
 	dev_data->domain = NULL;
 	list_del(&dev_data->list);
@@ -1948,6 +1945,16 @@ static void do_detach(struct iommu_dev_data *dev_data)
 
 	/* Flush the DTE entry */
 	device_flush_dte(dev_data);
+
+	/* Flush IOTLB */
+	domain_flush_tlb_pde(domain);
+
+	/* Wait for the flushes to finish */
+	domain_flush_complete(domain);
+
+	/* decrease reference counters - needs to happen after the flushes */
+	domain->dev_iommu[iommu->index] -= 1;
+	domain->dev_cnt                 -= 1;
 }
 
 /*
-- 
2.19.1

[PATCH 4.20 018/171] clk: ti: Fix error handling in ti_clk_parse_divider_data()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 303aef8b84272d73999a3207dd05bbe10ed89dc5 ]

The ti_clk_parse_divider_data() function is only called from
_get_div_table_from_setup().  That function doesn't look at the return
value but instead looks at the "*table" pointer.  In this case, if the
kcalloc() fails then *table is NULL (which means success).  It should
instead be an error pointer.

The ti_clk_parse_divider_data() function has two callers.  One checks
for errors and the other doesn't.  I have fixed it so now both handle
errors.

Fixes: 4f6be5655dc9 ("clk: ti: divider: add driver internal API for parsing divider data")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/divider.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index 8d77090ad94a..0241450f3eb3 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -403,8 +403,10 @@ int ti_clk_parse_divider_data(int *div_table, int num_dividers, int max_div,
 	num_dividers = i;
 
 	tmp = kcalloc(valid_div + 1, sizeof(*tmp), GFP_KERNEL);
-	if (!tmp)
+	if (!tmp) {
+		*table = ERR_PTR(-ENOMEM);
 		return -ENOMEM;
+	}
 
 	valid_div = 0;
 	*width = 0;
@@ -439,6 +441,7 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup)
 {
 	struct clk_omap_divider *div;
 	struct clk_omap_reg *reg;
+	int ret;
 
 	if (!setup)
 		return NULL;
@@ -458,6 +461,12 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup)
 		div->flags |= CLK_DIVIDER_POWER_OF_TWO;
 
 	div->table = _get_div_table_from_setup(setup, &div->width);
+	if (IS_ERR(div->table)) {
+		ret = PTR_ERR(div->table);
+		kfree(div);
+		return ERR_PTR(ret);
+	}
+
 
 	div->shift = setup->bit_shift;
 	div->latch = -EINVAL;
-- 
2.19.1

[PATCH 4.20 019/171] clk: qcom: gcc: Use active only source for CPUSS clocks

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 9ff1a3b4912528f853048ccd9757ba6a2cc75557 ]

The clocks of the CPUSS such as "gcc_cpuss_ahb_clk_src" is a CRITICAL
clock and needs to vote on the active only source of XO, so as to keep
the vote as long as CPUSS is active. Similar rbcpr_clk_src is also has
the same requirement.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gcc-sdm845.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index f133b7f5652f..26110e74e086 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -115,8 +115,8 @@ static const char * const gcc_parent_names_6[] = {
 	"core_bi_pll_test_se",
 };
 
-static const char * const gcc_parent_names_7[] = {
-	"bi_tcxo",
+static const char * const gcc_parent_names_7_ao[] = {
+	"bi_tcxo_ao",
 	"gpll0",
 	"gpll0_out_even",
 	"core_bi_pll_test_se",
@@ -128,6 +128,12 @@ static const char * const gcc_parent_names_8[] = {
 	"core_bi_pll_test_se",
 };
 
+static const char * const gcc_parent_names_8_ao[] = {
+	"bi_tcxo_ao",
+	"gpll0",
+	"core_bi_pll_test_se",
+};
+
 static const struct parent_map gcc_parent_map_10[] = {
 	{ P_BI_TCXO, 0 },
 	{ P_GPLL0_OUT_MAIN, 1 },
@@ -210,7 +216,7 @@ static struct clk_rcg2 gcc_cpuss_ahb_clk_src = {
 	.freq_tbl = ftbl_gcc_cpuss_ahb_clk_src,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "gcc_cpuss_ahb_clk_src",
-		.parent_names = gcc_parent_names_7,
+		.parent_names = gcc_parent_names_7_ao,
 		.num_parents = 4,
 		.ops = &clk_rcg2_ops,
 	},
@@ -229,7 +235,7 @@ static struct clk_rcg2 gcc_cpuss_rbcpr_clk_src = {
 	.freq_tbl = ftbl_gcc_cpuss_rbcpr_clk_src,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "gcc_cpuss_rbcpr_clk_src",
-		.parent_names = gcc_parent_names_8,
+		.parent_names = gcc_parent_names_8_ao,
 		.num_parents = 3,
 		.ops = &clk_rcg2_ops,
 	},
-- 
2.19.1

[PATCH 4.20 020/171] xtensa: SMP: fix ccount_timer_shutdown

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4fe8713b873fc881284722ce4ac47995de7cf62c ]

ccount_timer_shutdown is called from the atomic context in the
secondary_start_kernel, resulting in the following BUG:

BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
Preemption disabled at:
  secondary_start_kernel+0xa1/0x130
Call Trace:
  ___might_sleep+0xe7/0xfc
  __might_sleep+0x41/0x44
  synchronize_irq+0x24/0x64
  disable_irq+0x11/0x14
  ccount_timer_shutdown+0x12/0x20
  clockevents_switch_state+0x82/0xb4
  clockevents_exchange_device+0x54/0x60
  tick_check_new_device+0x46/0x70
  clockevents_register_device+0x8c/0xc8
  clockevents_config_and_register+0x1d/0x2c
  local_timer_setup+0x75/0x7c
  secondary_start_kernel+0xb4/0x130
  should_never_return+0x32/0x35

Use disable_irq_nosync instead of disable_irq to avoid it.
This is safe because the ccount timer IRQ is per-CPU, and once IRQ is
masked the ISR will not be called.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index fd524a54d2ab..378186b5eb40 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -89,7 +89,7 @@ static int ccount_timer_shutdown(struct clock_event_device *evt)
 		container_of(evt, struct ccount_timer, evt);
 
 	if (timer->irq_enabled) {
-		disable_irq(evt->irq);
+		disable_irq_nosync(evt->irq);
 		timer->irq_enabled = 0;
 	}
 	return 0;
-- 
2.19.1

[PATCH 4.20 021/171] RDMA/umem: Add missing initialization of owning_mm

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a2093dd35f8cfb28dd7c878ccbd020c1bb20d0d7 ]

When allocating a umem leaf for implicit ODP MR during page fault the
field owning_mm was not set.

Initialize and take a reference on this field to avoid kernel panic when
trying to access this field.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
 PGD 800000022dfed067 P4D 800000022dfed067 PUD 22dfcf067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 634 Comm: kworker/u33:0 Not tainted 4.20.0-rc6+ #89
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
 RIP: 0010:ib_umem_odp_map_dma_pages+0xf3/0x710 [ib_core]
 Code: 45 c0 48 21 f3 48 89 75 b0 31 f6 4a 8d 04 33 48 89 45 a8 49 8b 44 24 60 48 8b 78 10 e8 66 16 a8 c5 49 8b 54 24 08 48 89 45 98 <8b> 42 58 85 c0 0f 84 8e 05 00 00 8d 48 01 48 8d 72 58 f0 0f b1 4a
 RSP: 0000:ffffb610813a7c20 EFLAGS: 00010202
 RAX: ffff95ace6e8ac80 RBX: 0000000000000000 RCX: 000000000000000c
 RDX: 0000000000000000 RSI: 0000000000000850 RDI: ffff95aceaadae80
 RBP: ffffb610813a7ce0 R08: 0000000000000000 R09: 0000000000080c77
 R10: ffff95acfffdbd00 R11: 0000000000000000 R12: ffff95aceaa20a00
 R13: 0000000000001000 R14: 0000000000001000 R15: 000000000000000c
 FS:  0000000000000000(0000) GS:ffff95acf7800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000058 CR3: 000000022c834001 CR4: 00000000001606f0
 Call Trace:
  pagefault_single_data_segment+0x1df/0xc60 [mlx5_ib]
  mlx5_ib_eqe_pf_action+0x7bc/0xa70 [mlx5_ib]
  ? __switch_to+0xe1/0x470
  process_one_work+0x174/0x390
  worker_thread+0x4f/0x3e0
  kthread+0x102/0x140
  ? drain_workqueue+0x130/0x130
  ? kthread_stop+0x110/0x110
  ret_from_fork+0x1f/0x30

Fixes: f27a0d50a4bc ("RDMA/umem: Use umem->owning_mm inside ODP")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/umem_odp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/infiniband/core/umem_odp.c b/drivers/infiniband/core/umem_odp.c
index 676c1fd1119d..7ef385db52c3 100644
--- a/drivers/infiniband/core/umem_odp.c
+++ b/drivers/infiniband/core/umem_odp.c
@@ -356,6 +356,8 @@ struct ib_umem_odp *ib_alloc_odp_umem(struct ib_ucontext_per_mm *per_mm,
 	umem->writable   = 1;
 	umem->is_odp = 1;
 	odp_data->per_mm = per_mm;
+	umem->owning_mm  = per_mm->mm;
+	mmgrab(umem->owning_mm);
 
 	mutex_init(&odp_data->umem_mutex);
 	init_completion(&odp_data->notifier_completion);
@@ -388,6 +390,7 @@ struct ib_umem_odp *ib_alloc_odp_umem(struct ib_ucontext_per_mm *per_mm,
 out_page_list:
 	vfree(odp_data->page_list);
 out_odp_data:
+	mmdrop(umem->owning_mm);
 	kfree(odp_data);
 	return ERR_PTR(ret);
 }
-- 
2.19.1

[PATCH 4.20 022/171] riscv: Adjust mmap base address at a third of task size

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ae662eec8a515ab550524e04c793b5ddf1aae3a1 ]

This ratio is the most used among all other architectures and make
icache_hygiene libhugetlbfs test pass: this test mmap lots of
hugepages whose addresses, without this patch, reach the end of
the process user address space.

Signed-off-by: Alexandre Ghiti <aghiti@upmem.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/asm/processor.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index 0531f49af5c3..ce70bceb8872 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -22,7 +22,7 @@
  * This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE	PAGE_ALIGN(TASK_SIZE >> 1)
+#define TASK_UNMAPPED_BASE	PAGE_ALIGN(TASK_SIZE / 3)
 
 #define STACK_TOP		TASK_SIZE
 #define STACK_TOP_MAX		STACK_TOP
-- 
2.19.1

[PATCH 4.20 023/171] IB/ipoib: Fix for use-after-free in ipoib_cm_tx_start

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6ab4aba00f811a5265acc4d3eb1863bb3ca60562 ]

The following BUG was reported by kasan:

 BUG: KASAN: use-after-free in ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
 Read of size 80 at addr ffff88034c30bcd0 by task kworker/u16:1/24020

 Workqueue: ipoib_wq ipoib_cm_tx_start [ib_ipoib]
 Call Trace:
  dump_stack+0x9a/0xeb
  print_address_description+0xe3/0x2e0
  kasan_report+0x18a/0x2e0
  ? ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
  memcpy+0x1f/0x50
  ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
  ? kvm_clock_read+0x1f/0x30
  ? ipoib_cm_skb_reap+0x610/0x610 [ib_ipoib]
  ? __lock_is_held+0xc2/0x170
  ? process_one_work+0x880/0x1960
  ? process_one_work+0x912/0x1960
  process_one_work+0x912/0x1960
  ? wq_pool_ids_show+0x310/0x310
  ? lock_acquire+0x145/0x440
  worker_thread+0x87/0xbb0
  ? process_one_work+0x1960/0x1960
  kthread+0x314/0x3d0
  ? kthread_create_worker_on_cpu+0xc0/0xc0
  ret_from_fork+0x3a/0x50

 Allocated by task 0:
  kasan_kmalloc+0xa0/0xd0
  kmem_cache_alloc_trace+0x168/0x3e0
  path_rec_create+0xa2/0x1f0 [ib_ipoib]
  ipoib_start_xmit+0xa98/0x19e0 [ib_ipoib]
  dev_hard_start_xmit+0x159/0x8d0
  sch_direct_xmit+0x226/0xb40
  __dev_queue_xmit+0x1d63/0x2950
  neigh_update+0x889/0x1770
  arp_process+0xc47/0x21f0
  arp_rcv+0x462/0x760
  __netif_receive_skb_core+0x1546/0x2da0
  netif_receive_skb_internal+0xf2/0x590
  napi_gro_receive+0x28e/0x390
  ipoib_ib_handle_rx_wc_rss+0x873/0x1b60 [ib_ipoib]
  ipoib_rx_poll_rss+0x17d/0x320 [ib_ipoib]
  net_rx_action+0x427/0xe30
  __do_softirq+0x28e/0xc42

 Freed by task 26680:
  __kasan_slab_free+0x11d/0x160
  kfree+0xf5/0x360
  ipoib_flush_paths+0x532/0x9d0 [ib_ipoib]
  ipoib_set_mode_rss+0x1ad/0x560 [ib_ipoib]
  set_mode+0xc8/0x150 [ib_ipoib]
  kernfs_fop_write+0x279/0x440
  __vfs_write+0xd8/0x5c0
  vfs_write+0x15e/0x470
  ksys_write+0xb8/0x180
  do_syscall_64+0x9b/0x420
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 The buggy address belongs to the object at ffff88034c30bcc8
                which belongs to the cache kmalloc-512 of size 512
 The buggy address is located 8 bytes inside of
                512-byte region [ffff88034c30bcc8, ffff88034c30bec8)
 The buggy address belongs to the page:

The following race between change mode and xmit flow is the reason for
this use-after-free:

Change mode     Send packet 1 to GID XX      Send packet 2 to GID XX
     |                    |                             |
   start                  |                             |
     |                    |                             |
     |                    |                             |
     |         Create new path for GID XX               |
     |           and update neigh path                  |
     |                    |                             |
     |                    |                             |
     |                    |                             |
 flush_paths              |                             |
                          |                             |
               queue_work(cm.start_task)                |
                          |                 Path for GID XX not found
                          |                      create new path
                          |
                          |
               start_task runs with old
                    released path

There is no locking to protect the lifetime of the path through the
ipoib_cm_tx struct, so delete it entirely and always use the newly looked
up path under the priv->lock.

Fixes: 546481c2816e ("IB/ipoib: Fix memory corruption in ipoib cm mode connect flow")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/ipoib/ipoib.h    | 1 -
 drivers/infiniband/ulp/ipoib/ipoib_cm.c | 3 +--
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index 1da119d901a9..73e808c1e6ad 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -248,7 +248,6 @@ struct ipoib_cm_tx {
 	struct list_head     list;
 	struct net_device   *dev;
 	struct ipoib_neigh  *neigh;
-	struct ipoib_path   *path;
 	struct ipoib_tx_buf *tx_ring;
 	unsigned int	     tx_head;
 	unsigned int	     tx_tail;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 0428e01e8f69..aa9dcfc36cd3 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1312,7 +1312,6 @@ struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path
 
 	neigh->cm = tx;
 	tx->neigh = neigh;
-	tx->path = path;
 	tx->dev = dev;
 	list_add(&tx->list, &priv->cm.start_list);
 	set_bit(IPOIB_FLAG_INITIALIZED, &tx->flags);
@@ -1371,7 +1370,7 @@ static void ipoib_cm_tx_start(struct work_struct *work)
 				neigh->daddr + QPN_AND_OPTIONS_OFFSET);
 			goto free_neigh;
 		}
-		memcpy(&pathrec, &p->path->pathrec, sizeof(pathrec));
+		memcpy(&pathrec, &path->pathrec, sizeof(pathrec));
 
 		spin_unlock_irqrestore(&priv->lock, flags);
 		netif_tx_unlock_bh(dev);
-- 
2.19.1

[PATCH 4.20 024/171] selftests: cpu-hotplug: fix case where CPUs offline > CPUs present

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2b531b6137834a55857a337ac17510d6436b6fbb ]

The cpu-hotplug test assumes that we can offline the maximum CPU as
described by /sys/devices/system/cpu/offline.  However, in the case
where the number of CPUs exceeds like kernel configuration then
the offline count can be greater than the present count and we end
up trying to test the offlining of a CPU that is not available to
offline.  Fix this by testing the maximum present CPU instead.

Also, the test currently offlines the CPU and does not online it,
so fix this by onlining the CPU after the test.

Fixes: d89dffa976bc ("fault-injection: add selftests for cpu and memory hotplug")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/cpu-hotplug/cpu-on-off-test.sh        | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
index bab13dd025a6..0d26b5e3f966 100755
--- a/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
+++ b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
@@ -37,6 +37,10 @@ prerequisite()
 		exit $ksft_skip
 	fi
 
+	present_cpus=`cat $SYSFS/devices/system/cpu/present`
+	present_max=${present_cpus##*-}
+	echo "present_cpus = $present_cpus present_max = $present_max"
+
 	echo -e "\t Cpus in online state: $online_cpus"
 
 	offline_cpus=`cat $SYSFS/devices/system/cpu/offline`
@@ -151,6 +155,8 @@ online_cpus=0
 online_max=0
 offline_cpus=0
 offline_max=0
+present_cpus=0
+present_max=0
 
 while getopts e:ahp: opt; do
 	case $opt in
@@ -190,9 +196,10 @@ if [ $allcpus -eq 0 ]; then
 	online_cpu_expect_success $online_max
 
 	if [[ $offline_cpus -gt 0 ]]; then
-		echo -e "\t offline to online to offline: cpu $offline_max"
-		online_cpu_expect_success $offline_max
-		offline_cpu_expect_success $offline_max
+		echo -e "\t offline to online to offline: cpu $present_max"
+		online_cpu_expect_success $present_max
+		offline_cpu_expect_success $present_max
+		online_cpu $present_max
 	fi
 	exit 0
 else
-- 
2.19.1

[PATCH 4.20 025/171] xtensa: SMP: fix secondary CPU initialization

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 32a7726c4f4aadfabdb82440d84f88a5a2c8fe13 ]

- add missing memory barriers to the secondary CPU synchronization spin
  loops; add comment to the matching memory barrier in the boot_secondary
  and __cpu_die functions;
- use READ_ONCE/WRITE_ONCE to access cpu_start_id/cpu_start_ccount
  instead of reading/writing them directly;
- re-initialize cpu_running every time before starting secondary CPU to
  flush possible previous CPU startup results.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/head.S |  5 ++++-
 arch/xtensa/kernel/smp.c  | 34 +++++++++++++++++++++-------------
 2 files changed, 25 insertions(+), 14 deletions(-)

diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index 9053a5622d2c..5bd38ea2da38 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -280,12 +280,13 @@ should_never_return:
 
 	movi	a2, cpu_start_ccount
 1:
+	memw
 	l32i	a3, a2, 0
 	beqi	a3, 0, 1b
 	movi	a3, 0
 	s32i	a3, a2, 0
-	memw
 1:
+	memw
 	l32i	a3, a2, 0
 	beqi	a3, 0, 1b
 	wsr	a3, ccount
@@ -321,11 +322,13 @@ ENTRY(cpu_restart)
 	rsr	a0, prid
 	neg	a2, a0
 	movi	a3, cpu_start_id
+	memw
 	s32i	a2, a3, 0
 #if XCHAL_DCACHE_IS_WRITEBACK
 	dhwbi	a3, 0
 #endif
 1:
+	memw
 	l32i	a2, a3, 0
 	dhi	a3, 0
 	bne	a2, a0, 1b
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 932d64689bac..c9fc2c4f71b3 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -195,9 +195,11 @@ static int boot_secondary(unsigned int cpu, struct task_struct *ts)
 	int i;
 
 #ifdef CONFIG_HOTPLUG_CPU
-	cpu_start_id = cpu;
-	system_flush_invalidate_dcache_range(
-			(unsigned long)&cpu_start_id, sizeof(cpu_start_id));
+	WRITE_ONCE(cpu_start_id, cpu);
+	/* Pairs with the third memw in the cpu_restart */
+	mb();
+	system_flush_invalidate_dcache_range((unsigned long)&cpu_start_id,
+					     sizeof(cpu_start_id));
 #endif
 	smp_call_function_single(0, mx_cpu_start, (void *)cpu, 1);
 
@@ -206,18 +208,21 @@ static int boot_secondary(unsigned int cpu, struct task_struct *ts)
 			ccount = get_ccount();
 		while (!ccount);
 
-		cpu_start_ccount = ccount;
+		WRITE_ONCE(cpu_start_ccount, ccount);
 
-		while (time_before(jiffies, timeout)) {
+		do {
+			/*
+			 * Pairs with the first two memws in the
+			 * .Lboot_secondary.
+			 */
 			mb();
-			if (!cpu_start_ccount)
-				break;
-		}
+			ccount = READ_ONCE(cpu_start_ccount);
+		} while (ccount && time_before(jiffies, timeout));
 
-		if (cpu_start_ccount) {
+		if (ccount) {
 			smp_call_function_single(0, mx_cpu_stop,
-					(void *)cpu, 1);
-			cpu_start_ccount = 0;
+						 (void *)cpu, 1);
+			WRITE_ONCE(cpu_start_ccount, 0);
 			return -EIO;
 		}
 	}
@@ -237,6 +242,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	pr_debug("%s: Calling wakeup_secondary(cpu:%d, idle:%p, sp: %08lx)\n",
 			__func__, cpu, idle, start_info.stack);
 
+	init_completion(&cpu_running);
 	ret = boot_secondary(cpu, idle);
 	if (ret == 0) {
 		wait_for_completion_timeout(&cpu_running,
@@ -298,8 +304,10 @@ void __cpu_die(unsigned int cpu)
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 	while (time_before(jiffies, timeout)) {
 		system_invalidate_dcache_range((unsigned long)&cpu_start_id,
-				sizeof(cpu_start_id));
-		if (cpu_start_id == -cpu) {
+					       sizeof(cpu_start_id));
+		/* Pairs with the second memw in the cpu_restart */
+		mb();
+		if (READ_ONCE(cpu_start_id) == -cpu) {
 			platform_cpu_kill(cpu);
 			return;
 		}
-- 
2.19.1

[PATCH 4.20 026/171] xtensa: smp_lx200_defconfig: fix vectors clash

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 306b38305c0f86de7f17c5b091a95451dcc93d7d ]

Secondary CPU reset vector overlaps part of the double exception handler
code, resulting in weird crashes and hangups when running user code.
Move exception vectors one page up so that they don't clash with the
secondary CPU reset vector.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/configs/smp_lx200_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig
index 11fed6c06a7c..b5938160fb3d 100644
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@@ -33,6 +33,7 @@ CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
 # CONFIG_PCI is not set
+CONFIG_VECTORS_OFFSET=0x00002000
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=96M@0"
-- 
2.19.1

[PATCH 4.20 027/171] xtensa: SMP: mark each possible CPU as present

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8b1c42cdd7181200dc1fff39dcb6ac1a3fac2c25 ]

Otherwise it is impossible to enable CPUs after booting with 'maxcpus'
parameter.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index c9fc2c4f71b3..80be6449c497 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -83,7 +83,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned i;
 
-	for (i = 0; i < max_cpus; ++i)
+	for_each_possible_cpu(i)
 		set_cpu_present(i, true);
 }
 
-- 
2.19.1

[PATCH 4.20 028/171] iomap: get/put the page in iomap_page_create/release()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8e47a457321ca1a74ad194ab5dcbca764bc70731 ]

migrate_page_move_mapping() expects pages with private data set to have
a page_count elevated by 1.  This is what used to happen for xfs through
the buffer_heads code before the switch to iomap in commit 82cb14175e7d
("xfs: add support for sub-pagesize writeback without buffer_heads").
Not having the count elevated causes move_pages() to fail on memory
mapped files coming from xfs.

Make iomap compatible with the migrate_page_move_mapping() assumption by
elevating the page count as part of iomap_page_create() and lowering it
in iomap_page_release().

It causes the move_pages() syscall to misbehave on memory mapped files
from xfs.  It does not not move any pages, which I suppose is "just" a
perf issue, but it also ends up returning a positive number which is out
of spec for the syscall.  Talking to Michal Hocko, it sounds like
returning positive numbers might be a necessary update to move_pages()
anyway though.

Fixes: 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads")
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
[hch: actually get/put the page iomap_migrate_page() to make it work
      properly]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/iomap.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/fs/iomap.c b/fs/iomap.c
index ce837d962d47..7793e9e42ad5 100644
--- a/fs/iomap.c
+++ b/fs/iomap.c
@@ -116,6 +116,12 @@ iomap_page_create(struct inode *inode, struct page *page)
 	atomic_set(&iop->read_count, 0);
 	atomic_set(&iop->write_count, 0);
 	bitmap_zero(iop->uptodate, PAGE_SIZE / SECTOR_SIZE);
+
+	/*
+	 * migrate_page_move_mapping() assumes that pages with private data have
+	 * their count elevated by 1.
+	 */
+	get_page(page);
 	set_page_private(page, (unsigned long)iop);
 	SetPagePrivate(page);
 	return iop;
@@ -132,6 +138,7 @@ iomap_page_release(struct page *page)
 	WARN_ON_ONCE(atomic_read(&iop->write_count));
 	ClearPagePrivate(page);
 	set_page_private(page, 0);
+	put_page(page);
 	kfree(iop);
 }
 
@@ -569,8 +576,10 @@ iomap_migrate_page(struct address_space *mapping, struct page *newpage,
 
 	if (page_has_private(page)) {
 		ClearPagePrivate(page);
+		get_page(newpage);
 		set_page_private(newpage, page_private(page));
 		set_page_private(page, 0);
+		put_page(page);
 		SetPagePrivate(newpage);
 	}
 
-- 
2.19.1

[PATCH 4.20 029/171] iomap: fix a use after free in iomap_dio_rw

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4ea899ead2786a30aaa8181fefa81a3df4ad28f6 ]

Introduce a local wait_for_completion variable to avoid an access to the
potentially freed dio struture after dropping the last reference count.

Also use the chance to document the completion behavior to make the
refcounting clear to the reader of the code.

Fixes: ff6a9292e6 ("iomap: implement direct I/O")
Reported-by: Chandan Rajendra <chandan@linux.ibm.com>
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chandan Rajendra <chandan@linux.ibm.com>
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/iomap.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/fs/iomap.c b/fs/iomap.c
index 7793e9e42ad5..83d9a196fe3e 100644
--- a/fs/iomap.c
+++ b/fs/iomap.c
@@ -1806,6 +1806,7 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 	loff_t pos = iocb->ki_pos, start = pos;
 	loff_t end = iocb->ki_pos + count - 1, ret = 0;
 	unsigned int flags = IOMAP_DIRECT;
+	bool wait_for_completion = is_sync_kiocb(iocb);
 	struct blk_plug plug;
 	struct iomap_dio *dio;
 
@@ -1825,7 +1826,6 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 	dio->end_io = end_io;
 	dio->error = 0;
 	dio->flags = 0;
-	dio->wait_for_completion = is_sync_kiocb(iocb);
 
 	dio->submit.iter = iter;
 	dio->submit.waiter = current;
@@ -1880,7 +1880,7 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 		dio_warn_stale_pagecache(iocb->ki_filp);
 	ret = 0;
 
-	if (iov_iter_rw(iter) == WRITE && !dio->wait_for_completion &&
+	if (iov_iter_rw(iter) == WRITE && !wait_for_completion &&
 	    !inode->i_sb->s_dio_done_wq) {
 		ret = sb_init_dio_done_wq(inode->i_sb);
 		if (ret < 0)
@@ -1896,7 +1896,7 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 		if (ret <= 0) {
 			/* magic error code to fall back to buffered I/O */
 			if (ret == -ENOTBLK) {
-				dio->wait_for_completion = true;
+				wait_for_completion = true;
 				ret = 0;
 			}
 			break;
@@ -1918,8 +1918,24 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 	if (dio->flags & IOMAP_DIO_WRITE_FUA)
 		dio->flags &= ~IOMAP_DIO_NEED_SYNC;
 
+	/*
+	 * We are about to drop our additional submission reference, which
+	 * might be the last reference to the dio.  There are three three
+	 * different ways we can progress here:
+	 *
+	 *  (a) If this is the last reference we will always complete and free
+	 *	the dio ourselves.
+	 *  (b) If this is not the last reference, and we serve an asynchronous
+	 *	iocb, we must never touch the dio after the decrement, the
+	 *	I/O completion handler will complete and free it.
+	 *  (c) If this is not the last reference, but we serve a synchronous
+	 *	iocb, the I/O completion handler will wake us up on the drop
+	 *	of the final reference, and we will complete and free it here
+	 *	after we got woken by the I/O completion handler.
+	 */
+	dio->wait_for_completion = wait_for_completion;
 	if (!atomic_dec_and_test(&dio->ref)) {
-		if (!dio->wait_for_completion)
+		if (!wait_for_completion)
 			return -EIOCBQUEUED;
 
 		for (;;) {
@@ -1936,9 +1952,7 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 		__set_current_state(TASK_RUNNING);
 	}
 
-	ret = iomap_dio_complete(dio);
-
-	return ret;
+	return iomap_dio_complete(dio);
 
 out_free_dio:
 	kfree(dio);
-- 
2.19.1

[PATCH 4.20 030/171] xtensa: SMP: limit number of possible CPUs by NR_CPUS

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 25384ce5f9530def39421597b1457d9462df6455 ]

This fixes the following warning at boot when the kernel is booted on a
board with more CPU cores than was configured in NR_CPUS:

  smp_init_cpus: Core Count = 8
  smp_init_cpus: Core Id = 0
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:121 smp_init_cpus+0x54/0x74
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc3-00015-g1459333f88a0 #124
  Call Trace:
    __warn$part$3+0x6a/0x7c
    warn_slowpath_null+0x35/0x3c
    smp_init_cpus+0x54/0x74
    setup_arch+0x1c0/0x1d0
    start_kernel+0x44/0x310
    _startup+0x107/0x107

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/smp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 80be6449c497..be1f280c322c 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -96,6 +96,11 @@ void __init smp_init_cpus(void)
 	pr_info("%s: Core Count = %d\n", __func__, ncpus);
 	pr_info("%s: Core Id = %d\n", __func__, core_id);
 
+	if (ncpus > NR_CPUS) {
+		ncpus = NR_CPUS;
+		pr_info("%s: limiting core count by %d\n", __func__, ncpus);
+	}
+
 	for (i = 0; i < ncpus; ++i)
 		set_cpu_possible(i, true);
 }
-- 
2.19.1

[PATCH 4.20 031/171] net: altera_tse: fix msgdma_tx_completion on non-zero fill_level case

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6571ebce112a21ec9be68ef2f53b96fcd41fd81b ]

If fill_level was not zero and status was not BUSY,
result of "tx_prod - tx_cons - inuse" might be zero.
Subtracting 1 unconditionally results invalid negative return value
on this case.
Make sure not to return an negative value.

Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp>
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Reviewed-by: Dalon L Westergreen <dalon.westergreen@linux.intel.com>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/altera/altera_msgdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/altera/altera_msgdma.c b/drivers/net/ethernet/altera/altera_msgdma.c
index 0fb986ba3290..0ae723f75341 100644
--- a/drivers/net/ethernet/altera/altera_msgdma.c
+++ b/drivers/net/ethernet/altera/altera_msgdma.c
@@ -145,7 +145,8 @@ u32 msgdma_tx_completions(struct altera_tse_private *priv)
 			& 0xffff;
 
 	if (inuse) { /* Tx FIFO is not empty */
-		ready = priv->tx_prod - priv->tx_cons - inuse - 1;
+		ready = max_t(int,
+			      priv->tx_prod - priv->tx_cons - inuse - 1, 0);
 	} else {
 		/* Check for buffered last packet */
 		status = csrrd32(priv->tx_dma_csr, msgdma_csroffs(status));
-- 
2.19.1

[PATCH 4.20 032/171] net: hns: Fix for missing of_node_put() after of_parse_phandle()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 263c6d75f9a544a3c2f8f6a26de4f4808d8f59cf ]

In hns enet driver, we use of_parse_handle() to get hold of the
device node related to "ae-handle" but we have missed to put
the node reference using of_node_put() after we are done using
the node. This patch fixes it.

Note:
This problem is stated in Link: https://lkml.org/lkml/2018/12/22/217

Fixes: 48189d6aaf1e ("net: hns: enet specifies a reference to dsaf")
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 6242249c9f4c..b043370c2685 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -2419,6 +2419,8 @@ static int hns_nic_dev_probe(struct platform_device *pdev)
 out_notify_fail:
 	(void)cancel_work_sync(&priv->service_task);
 out_read_prop_fail:
+	/* safe for ACPI FW */
+	of_node_put(to_of_node(priv->fwnode));
 	free_netdev(ndev);
 	return ret;
 }
@@ -2448,6 +2450,9 @@ static int hns_nic_dev_remove(struct platform_device *pdev)
 	set_bit(NIC_STATE_REMOVING, &priv->state);
 	(void)cancel_work_sync(&priv->service_task);
 
+	/* safe for ACPI FW */
+	of_node_put(to_of_node(priv->fwnode));
+
 	free_netdev(ndev);
 	return 0;
 }
-- 
2.19.1

[PATCH 4.20 033/171] net: hns: Restart autoneg need return failed when autoneg off

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ed29ca8b9592562559c64d027fb5eb126e463e2c ]

The hns driver of earlier devices, when autoneg off, restart autoneg
will return -EINVAL, so make the hns driver for the latest devices
do the same.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index 774beda040a1..e2710ff48fb0 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -1157,16 +1157,18 @@ static int hns_get_regs_len(struct net_device *net_dev)
  */
 static int hns_nic_nway_reset(struct net_device *netdev)
 {
-	int ret = 0;
 	struct phy_device *phy = netdev->phydev;
 
-	if (netif_running(netdev)) {
-		/* if autoneg is disabled, don't restart auto-negotiation */
-		if (phy && phy->autoneg == AUTONEG_ENABLE)
-			ret = genphy_restart_aneg(phy);
-	}
+	if (!netif_running(netdev))
+		return 0;
 
-	return ret;
+	if (!phy)
+		return -EOPNOTSUPP;
+
+	if (phy->autoneg != AUTONEG_ENABLE)
+		return -EINVAL;
+
+	return genphy_restart_aneg(phy);
 }
 
 static u32
-- 
2.19.1

[PATCH 4.20 034/171] net: hns: Fix wrong read accesses via Clause 45 MDIO protocol

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit cec8abba13e6a26729dfed41019720068eeeff2b ]

When reading phy registers via Clause 45 MDIO protocol, after write
address operation, the driver use another write address operation, so
can not read the right value of any phy registers. This patch fixes it.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c
index 017e08452d8c..baf5cc251f32 100644
--- a/drivers/net/ethernet/hisilicon/hns_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns_mdio.c
@@ -321,7 +321,7 @@ static int hns_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 		}
 
 		hns_mdio_cmd_write(mdio_dev, is_c45,
-				   MDIO_C45_WRITE_ADDR, phy_id, devad);
+				   MDIO_C45_READ, phy_id, devad);
 	}
 
 	/* Step 5: waitting for MDIO_COMMAND_REG 's mdio_start==0,*/
-- 
2.19.1

[PATCH 4.20 035/171] net: stmmac: dwmac-rk: fix error handling in rk_gmac_powerup()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c69c29a1a0a8f68cd87e98ba4a5a79fb8ef2a58c ]

If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 7b923362ee55..3b174eae77c1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1342,8 +1342,10 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
 	}
 
 	ret = phy_power_on(bsp_priv, true);
-	if (ret)
+	if (ret) {
+		gmac_clk_enable(bsp_priv, false);
 		return ret;
+	}
 
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
-- 
2.19.1

[PATCH 4.20 036/171] netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2035f3ff8eaa29cfb5c8e2160b0f6e85eeb21a95 ]

Unlike ip(6)tables ebtables only counts user-defined chains.

The effect is that a 32bit ebtables binary on a 64bit kernel can do
'ebtables -N FOO' only after adding at least one rule, else the request
fails with -EINVAL.

This is a similar fix as done in
3f1e53abff84 ("netfilter: ebtables: don't attempt to allocate 0-sized compat array").

Fixes: 7d7d7e02111e9 ("netfilter: compat: reject huge allocation requests")
Reported-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/netfilter/ebtables.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 5e55cef0cec3..6693e209efe8 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -2293,9 +2293,12 @@ static int compat_do_replace(struct net *net, void __user *user,
 
 	xt_compat_lock(NFPROTO_BRIDGE);
 
-	ret = xt_compat_init_offsets(NFPROTO_BRIDGE, tmp.nentries);
-	if (ret < 0)
-		goto out_unlock;
+	if (tmp.nentries) {
+		ret = xt_compat_init_offsets(NFPROTO_BRIDGE, tmp.nentries);
+		if (ret < 0)
+			goto out_unlock;
+	}
+
 	ret = compat_copy_entries(entries_tmp, tmp.entries_size, &state);
 	if (ret < 0)
 		goto out_unlock;
-- 
2.19.1

[PATCH 4.20 037/171] gpio: vf610: Mask all GPIO interrupts

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7ae710f9f8b2cf95297e7bbfe1c09789a7dc43d4 ]

On SoC reset all GPIO interrupts are disable. However, if kexec is
used to boot into a new kernel, the SoC does not experience a
reset. Hence GPIO interrupts can be left enabled from the previous
kernel. It is then possible for the interrupt to fire before an
interrupt handler is registered, resulting in the kernel complaining
of an "unexpected IRQ trap", the interrupt is never cleared, and so
fires again, resulting in an interrupt storm.

Disable all GPIO interrupts before registering the GPIO IRQ chip.

Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-vf610.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 5960396c8d9a..222170a1715f 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -250,6 +250,7 @@ static int vf610_gpio_probe(struct platform_device *pdev)
 	struct vf610_gpio_port *port;
 	struct resource *iores;
 	struct gpio_chip *gc;
+	int i;
 	int ret;
 
 	port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
@@ -289,6 +290,10 @@ static int vf610_gpio_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	/* Mask all GPIO interrupts */
+	for (i = 0; i < gc->ngpio; i++)
+		vf610_gpio_writel(0, port->base + PORT_PCR(i));
+
 	/* Clear the interrupt status register for all GPIO's */
 	vf610_gpio_writel(~0, port->base + PORT_ISFR);
 
-- 
2.19.1

[PATCH 4.20 038/171] selftests: net: use LDLIBS instead of LDFLAGS

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 870f193d48c25a97d61a8e6c04e3c29a2c606850 ]

reuseport_bpf_numa fails to build due to undefined reference errors:

 aarch64-linaro-linux-gcc
 --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall
 -Wl,--no-as-needed -O2 -g -I../../../../usr/include/  -Wl,-O1
 -Wl,--hash-style=gnu -Wl,--as-needed -lnuma  reuseport_bpf_numa.c
 -o
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa
 /tmp/ccfUuExT.o: In function `send_from_node':
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138:
 undefined reference to `numa_run_on_node'
 /tmp/ccfUuExT.o: In function `main':
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230:
 undefined reference to `numa_available'
 /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233:
 undefined reference to `numa_max_node'

It's GNU Make and linker specific.

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.

More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.

LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.

https://lkml.org/lkml/2010/2/10/362

tools/perf: libraries must come after objects

Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libnuma.

Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 923570a9708a..68e2295e7589 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -19,6 +19,6 @@ TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls
 KSFT_KHDR_INSTALL := 1
 include ../lib.mk
 
-$(OUTPUT)/reuseport_bpf_numa: LDFLAGS += -lnuma
+$(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma
 $(OUTPUT)/tcp_mmap: LDFLAGS += -lpthread
 $(OUTPUT)/tcp_inq: LDFLAGS += -lpthread
-- 
2.19.1

[PATCH 4.20 039/171] selftests: timers: use LDLIBS instead of LDFLAGS

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7d4e591bc051d3382c45caaa2530969fb42ed23d ]

posix_timers fails to build due to undefined reference errors:

 aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
 -O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall
 -DKTEST  -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread
 posix_timers.c
 -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers
 /tmp/cc1FTZzT.o: In function `check_timer_create':
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157:
 undefined reference to `timer_create'
 /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170:
 undefined reference to `timer_settime'
 collect2: error: ld returned 1 exit status

It's GNU Make and linker specific.

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.

More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.

LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.

https://lkml.org/lkml/2010/2/10/362

tools/perf: libraries must come after objects

Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/timers/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
index c02683cfb6c9..7656c7ce79d9 100644
--- a/tools/testing/selftests/timers/Makefile
+++ b/tools/testing/selftests/timers/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 CFLAGS += -O3 -Wl,-no-as-needed -Wall
-LDFLAGS += -lrt -lpthread -lm
+LDLIBS += -lrt -lpthread -lm
 
 # these are all "safe" tests that don't modify
 # system time or require escalated privileges
-- 
2.19.1

[PATCH 4.20 040/171] nfs: Fix NULL pointer dereference of dev_name

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 80ff00172407e0aad4b10b94ef0816fc3e7813cb ]

There is a NULL pointer dereference of dev_name in nfs_parse_devname()

The oops looks something like:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  ...
  RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs]
  ...
  Call Trace:
   ? ida_alloc_range+0x34b/0x3d0
   ? nfs_clone_super+0x80/0x80 [nfs]
   ? nfs_free_parsed_mount_data+0x60/0x60 [nfs]
   mount_fs+0x52/0x170
   ? __init_waitqueue_head+0x3b/0x50
   vfs_kern_mount+0x6b/0x170
   do_mount+0x216/0xdc0
   ksys_mount+0x83/0xd0
   __x64_sys_mount+0x25/0x30
   do_syscall_64+0x65/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a NULL check on dev_name

Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/super.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 5ef2c71348bd..6b666d187907 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1906,6 +1906,11 @@ static int nfs_parse_devname(const char *dev_name,
 	size_t len;
 	char *end;
 
+	if (unlikely(!dev_name || !*dev_name)) {
+		dfprintk(MOUNT, "NFS: device name not specified\n");
+		return -EINVAL;
+	}
+
 	/* Is the host name protected with square brakcets? */
 	if (*dev_name == '[') {
 		end = strchr(++dev_name, ']');
-- 
2.19.1

[PATCH 4.20 041/171] qed: Fix bug in tx promiscuous mode settings

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 9e71a15d8b5bbce25c637f7f8833cd3f45b65646 ]

When running tx switched traffic between VNICs
created via a bridge(to which VFs are added),
adapter drops the unicast packets in tx flow due to
VNIC's ucast mac being unknown to it. But VF interfaces
being in promiscuous mode should have caused adapter
to accept all the unknown ucast packets. Later, it
was found that driver doesn't really configure tx
promiscuous mode settings to accept all unknown unicast macs.

This patch fixes tx promiscuous mode settings to accept all
unknown/unmatched unicast macs and works out the scenario.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 67c02ea93906..b8baa6fcef8e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -609,6 +609,10 @@ qed_sp_update_accept_mode(struct qed_hwfn *p_hwfn,
 			  (!!(accept_filter & QED_ACCEPT_MCAST_MATCHED) &&
 			   !!(accept_filter & QED_ACCEPT_MCAST_UNMATCHED)));
 
+		SET_FIELD(state, ETH_VPORT_TX_MODE_UCAST_ACCEPT_ALL,
+			  (!!(accept_filter & QED_ACCEPT_UCAST_MATCHED) &&
+			   !!(accept_filter & QED_ACCEPT_UCAST_UNMATCHED)));
+
 		SET_FIELD(state, ETH_VPORT_TX_MODE_BCAST_ACCEPT_ALL,
 			  !!(accept_filter & QED_ACCEPT_BCAST));
 
@@ -2688,7 +2692,8 @@ static int qed_configure_filter_rx_mode(struct qed_dev *cdev,
 	if (type == QED_FILTER_RX_MODE_TYPE_PROMISC) {
 		accept_flags.rx_accept_filter |= QED_ACCEPT_UCAST_UNMATCHED |
 						 QED_ACCEPT_MCAST_UNMATCHED;
-		accept_flags.tx_accept_filter |= QED_ACCEPT_MCAST_UNMATCHED;
+		accept_flags.tx_accept_filter |= QED_ACCEPT_UCAST_UNMATCHED |
+						 QED_ACCEPT_MCAST_UNMATCHED;
 	} else if (type == QED_FILTER_RX_MODE_TYPE_MULTI_PROMISC) {
 		accept_flags.rx_accept_filter |= QED_ACCEPT_MCAST_UNMATCHED;
 		accept_flags.tx_accept_filter |= QED_ACCEPT_MCAST_UNMATCHED;
-- 
2.19.1

[PATCH 4.20 042/171] qed: Fix LACP pdu drops for VFs

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ff9296966e5e00b0d0d00477b2365a178f0f06a3 ]

VF is always configured to drop control frames
(with reserved mac addresses) but to work LACP
on the VFs, it would require LACP control frames
to be forwarded or transmitted successfully.

This patch fixes this in such a way that trusted VFs
(marked through ndo_set_vf_trust) would be allowed to
pass the control frames such as LACP pdus.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c    |  5 +++++
 drivers/net/ethernet/qlogic/qed/qed_l2.h    |  3 +++
 drivers/net/ethernet/qlogic/qed/qed_sriov.c | 10 ++++++++--
 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index b8baa6fcef8e..e68ca83ae915 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -748,6 +748,11 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
 		return rc;
 	}
 
+	if (p_params->update_ctl_frame_check) {
+		p_cmn->ctl_frame_mac_check_en = p_params->mac_chk_en;
+		p_cmn->ctl_frame_ethtype_check_en = p_params->ethtype_chk_en;
+	}
+
 	/* Update mcast bins for VFs, PF doesn't use this functionality */
 	qed_sp_update_mcast_bin(p_hwfn, p_ramrod, p_params);
 
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h
index 8d80f1095d17..7127d5aaac42 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h
@@ -219,6 +219,9 @@ struct qed_sp_vport_update_params {
 	struct qed_rss_params		*rss_params;
 	struct qed_filter_accept_flags	accept_flags;
 	struct qed_sge_tpa_params	*sge_tpa_params;
+	u8				update_ctl_frame_check;
+	u8				mac_chk_en;
+	u8				ethtype_chk_en;
 };
 
 int qed_sp_vport_update(struct qed_hwfn *p_hwfn,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index ca6290fa0f30..71a7af134dd8 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -1969,7 +1969,9 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn,
 	params.vport_id = vf->vport_id;
 	params.max_buffers_per_cqe = start->max_buffers_per_cqe;
 	params.mtu = vf->mtu;
-	params.check_mac = true;
+
+	/* Non trusted VFs should enable control frame filtering */
+	params.check_mac = !vf->p_vf_info.is_trusted_configured;
 
 	rc = qed_sp_eth_vport_start(p_hwfn, &params);
 	if (rc) {
@@ -5130,6 +5132,9 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn)
 		params.opaque_fid = vf->opaque_fid;
 		params.vport_id = vf->vport_id;
 
+		params.update_ctl_frame_check = 1;
+		params.mac_chk_en = !vf_info->is_trusted_configured;
+
 		if (vf_info->rx_accept_mode & mask) {
 			flags->update_rx_mode_config = 1;
 			flags->rx_accept_filter = vf_info->rx_accept_mode;
@@ -5147,7 +5152,8 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn)
 		}
 
 		if (flags->update_rx_mode_config ||
-		    flags->update_tx_mode_config)
+		    flags->update_tx_mode_config ||
+		    params.update_ctl_frame_check)
 			qed_sp_vport_update(hwfn, &params,
 					    QED_SPQ_MODE_EBLOCK, NULL);
 	}
-- 
2.19.1

[PATCH 4.20 043/171] qed: Fix VF probe failure while FLR

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 327852ec64205bb651be391a069784872098a3b2 ]

VFs may hit VF-PF channel timeout while probing, as in some
cases it was observed that VF FLR and VF "acquire" message
transaction (i.e first message from VF to PF in VF's probe flow)
could occur simultaneously which could lead VF to fail sending
"acquire" message to PF as VF is marked disabled from HW perspective
due to FLR, which will result into channel timeout and VF probe failure.

In such cases, try retrying VF "acquire" message so that in later
attempts it could be successful to pass message to PF after the VF
FLR is completed and can be probed successfully.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_vf.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c
index b6cccf44bf40..5dda547772c1 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c
@@ -261,6 +261,7 @@ static int qed_vf_pf_acquire(struct qed_hwfn *p_hwfn)
 	struct pfvf_acquire_resp_tlv *resp = &p_iov->pf2vf_reply->acquire_resp;
 	struct pf_vf_pfdev_info *pfdev_info = &resp->pfdev_info;
 	struct vf_pf_resc_request *p_resc;
+	u8 retry_cnt = VF_ACQUIRE_THRESH;
 	bool resources_acquired = false;
 	struct vfpf_acquire_tlv *req;
 	int rc = 0, attempts = 0;
@@ -314,6 +315,15 @@ static int qed_vf_pf_acquire(struct qed_hwfn *p_hwfn)
 
 		/* send acquire request */
 		rc = qed_send_msg2pf(p_hwfn, &resp->hdr.status, sizeof(*resp));
+
+		/* Re-try acquire in case of vf-pf hw channel timeout */
+		if (retry_cnt && rc == -EBUSY) {
+			DP_VERBOSE(p_hwfn, QED_MSG_IOV,
+				   "VF retrying to acquire due to VPC timeout\n");
+			retry_cnt--;
+			continue;
+		}
+
 		if (rc)
 			goto exit;
 
-- 
2.19.1

[PATCH 4.20 044/171] qed: Fix system crash in ll2 xmit

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7c81626a3c37e4ac320b8ad785694ba498f24794 ]

Cache number of fragments in the skb locally as in case
of linear skb (with zero fragments), tx completion
(or freeing of skb) may happen before driver tries
to get number of frgaments from the skb which could
lead to stale access to an already freed skb.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_ll2.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
index 9e728ec82c21..25f67c0d5c57 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -2441,19 +2441,24 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb,
 {
 	struct qed_ll2_tx_pkt_info pkt;
 	const skb_frag_t *frag;
+	u8 flags = 0, nr_frags;
 	int rc = -EINVAL, i;
 	dma_addr_t mapping;
 	u16 vlan = 0;
-	u8 flags = 0;
 
 	if (unlikely(skb->ip_summed != CHECKSUM_NONE)) {
 		DP_INFO(cdev, "Cannot transmit a checksummed packet\n");
 		return -EINVAL;
 	}
 
-	if (1 + skb_shinfo(skb)->nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) {
+	/* Cache number of fragments from SKB since SKB may be freed by
+	 * the completion routine after calling qed_ll2_prepare_tx_packet()
+	 */
+	nr_frags = skb_shinfo(skb)->nr_frags;
+
+	if (1 + nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) {
 		DP_ERR(cdev, "Cannot transmit a packet with %d fragments\n",
-		       1 + skb_shinfo(skb)->nr_frags);
+		       1 + nr_frags);
 		return -EINVAL;
 	}
 
@@ -2475,7 +2480,7 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb,
 	}
 
 	memset(&pkt, 0, sizeof(pkt));
-	pkt.num_of_bds = 1 + skb_shinfo(skb)->nr_frags;
+	pkt.num_of_bds = 1 + nr_frags;
 	pkt.vlan = vlan;
 	pkt.bd_flags = flags;
 	pkt.tx_dest = QED_LL2_TX_DEST_NW;
@@ -2486,12 +2491,17 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb,
 	    test_bit(QED_LL2_XMIT_FLAGS_FIP_DISCOVERY, &xmit_flags))
 		pkt.remove_stag = true;
 
+	/* qed_ll2_prepare_tx_packet() may actually send the packet if
+	 * there are no fragments in the skb and subsequently the completion
+	 * routine may run and free the SKB, so no dereferencing the SKB
+	 * beyond this point unless skb has any fragments.
+	 */
 	rc = qed_ll2_prepare_tx_packet(&cdev->hwfns[0], cdev->ll2->handle,
 				       &pkt, 1);
 	if (rc)
 		goto err;
 
-	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+	for (i = 0; i < nr_frags; i++) {
 		frag = &skb_shinfo(skb)->frags[i];
 
 		mapping = skb_frag_dma_map(&cdev->pdev->dev, frag, 0,
-- 
2.19.1

[PATCH 4.20 045/171] qed: Fix stack out of bounds bug

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ffb057f98928aa099b08e419bbe5afc26ec9f448 ]

KASAN reported following bug in qed_init_qm_get_idx_from_flags
due to inappropriate casting of "pq_flags". Fix the type of "pq_flags".

[  196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed]
[  196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712
[  196.624714]
[  196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1
[  196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018
[  196.624733] Workqueue: events work_for_cpu_fn
[  196.624738] Call trace:
[  196.624742]  dump_backtrace+0x0/0x2f8
[  196.624745]  show_stack+0x24/0x30
[  196.624749]  dump_stack+0xe0/0x11c
[  196.624755]  print_address_description+0x68/0x260
[  196.624759]  kasan_report+0x178/0x340
[  196.624762]  __asan_report_load_n_noabort+0x38/0x48
[  196.624786]  qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed]
[  196.624808]  qed_init_qm_info+0xec0/0x2200 [qed]
[  196.624830]  qed_resc_alloc+0x284/0x7e8 [qed]
[  196.624853]  qed_slowpath_start+0x6cc/0x1ae8 [qed]
[  196.624864]  __qede_probe.isra.10+0x1cc/0x12c0 [qede]
[  196.624874]  qede_probe+0x78/0xf0 [qede]
[  196.624879]  local_pci_probe+0xc4/0x180
[  196.624882]  work_for_cpu_fn+0x54/0x98
[  196.624885]  process_one_work+0x758/0x1900
[  196.624888]  worker_thread+0x4e0/0xd18
[  196.624892]  kthread+0x2c8/0x350
[  196.624897]  ret_from_fork+0x10/0x18
[  196.624899]
[  196.624902] Allocated by task 2:
[  196.624906]  kasan_kmalloc.part.1+0x40/0x108
[  196.624909]  kasan_kmalloc+0xb4/0xc8
[  196.624913]  kasan_slab_alloc+0x14/0x20
[  196.624916]  kmem_cache_alloc_node+0x1dc/0x480
[  196.624921]  copy_process.isra.1.part.2+0x1d8/0x4a98
[  196.624924]  _do_fork+0x150/0xfa0
[  196.624926]  kernel_thread+0x48/0x58
[  196.624930]  kthreadd+0x3a4/0x5a0
[  196.624932]  ret_from_fork+0x10/0x18
[  196.624934]
[  196.624937] Freed by task 0:
[  196.624938] (stack is not available)
[  196.624940]
[  196.624943] The buggy address belongs to the object at ffff809b00bc0000
[  196.624943]  which belongs to the cache thread_stack of size 32768
[  196.624946] The buggy address is located 29536 bytes inside of
[  196.624946]  32768-byte region [ffff809b00bc0000, ffff809b00bc8000)
[  196.624948] The buggy address belongs to the page:
[  196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0
[  196.624960] flags: 0xfffff8000008100(slab|head)
[  196.624967] raw: 0fffff8000008100 dead000000000100 dead000000000200 ffff809b4001c000
[  196.624970] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[  196.624973] page dumped because: kasan: bad access detected
[  196.624974]
[  196.624976] Memory state around the buggy address:
[  196.624980]  ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624983]  ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2
[  196.624988]                                                        ^
[  196.624990]  ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624993]  ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  196.624995] ==================================================================

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 88a8576ca9ce..f81abed29a76 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -480,19 +480,19 @@ static void qed_init_qm_pq(struct qed_hwfn *p_hwfn,
 
 /* get pq index according to PQ_FLAGS */
 static u16 *qed_init_qm_get_idx_from_flags(struct qed_hwfn *p_hwfn,
-					   u32 pq_flags)
+					   unsigned long pq_flags)
 {
 	struct qed_qm_info *qm_info = &p_hwfn->qm_info;
 
 	/* Can't have multiple flags set here */
-	if (bitmap_weight((unsigned long *)&pq_flags,
+	if (bitmap_weight(&pq_flags,
 			  sizeof(pq_flags) * BITS_PER_BYTE) > 1) {
-		DP_ERR(p_hwfn, "requested multiple pq flags 0x%x\n", pq_flags);
+		DP_ERR(p_hwfn, "requested multiple pq flags 0x%lx\n", pq_flags);
 		goto err;
 	}
 
 	if (!(qed_get_pq_flags(p_hwfn) & pq_flags)) {
-		DP_ERR(p_hwfn, "pq flag 0x%x is not set\n", pq_flags);
+		DP_ERR(p_hwfn, "pq flag 0x%lx is not set\n", pq_flags);
 		goto err;
 	}
 
-- 
2.19.1

[PATCH 4.20 046/171] scsi: libfc: free skb when receiving invalid flogi resp

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 5d8fc4a9f0eec20b6c07895022a6bea3fb6dfb38 ]

The issue to be fixed in this commit is when libfc found it received a
invalid FLOGI response from FC switch, it would return without freeing the
fc frame, which is just the skb data. This would cause memory leak if FC
switch keeps sending invalid FLOGI responses.

This fix is just to make it execute `fc_frame_free(fp)` before returning
from function `fc_lport_flogi_resp`.

Signed-off-by: Ming Lu <ming.lu@citrix.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_lport.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index be83590ed955..ff943f477d6f 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1726,14 +1726,14 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 	    fc_frame_payload_op(fp) != ELS_LS_ACC) {
 		FC_LPORT_DBG(lport, "FLOGI not accepted or bad response\n");
 		fc_lport_error(lport, fp);
-		goto err;
+		goto out;
 	}
 
 	flp = fc_frame_payload_get(fp, sizeof(*flp));
 	if (!flp) {
 		FC_LPORT_DBG(lport, "FLOGI bad response\n");
 		fc_lport_error(lport, fp);
-		goto err;
+		goto out;
 	}
 
 	mfs = ntohs(flp->fl_csp.sp_bb_data) &
@@ -1743,7 +1743,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 		FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, "
 			     "lport->mfs:%hu\n", mfs, lport->mfs);
 		fc_lport_error(lport, fp);
-		goto err;
+		goto out;
 	}
 
 	if (mfs <= lport->mfs) {
-- 
2.19.1

[PATCH 4.20 047/171] scsi: scsi_debug: fix write_same with virtual_gb problem

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 40d07b523cf434f252b134c86b1f8f2d907ffb0b ]

The WRITE SAME(10) and (16) implementations didn't take account of the
buffer wrap required when the virtual_gb parameter is greater than 0.

Fix that and rename the fake_store() function to lba2fake_store() to lessen
confusion with the global fake_storep pointer. Bump version date.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_debug.c | 41 ++++++++++++++++++++-------------------
 1 file changed, 21 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 60bcc6df97a9..65305b3848bc 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -62,7 +62,7 @@
 
 /* make sure inq_product_rev string corresponds to this version */
 #define SDEBUG_VERSION "0188"	/* format to fit INQUIRY revision field */
-static const char *sdebug_version_date = "20180128";
+static const char *sdebug_version_date = "20190125";
 
 #define MY_NAME "scsi_debug"
 
@@ -735,7 +735,7 @@ static inline bool scsi_debug_lbp(void)
 		(sdebug_lbpu || sdebug_lbpws || sdebug_lbpws10);
 }
 
-static void *fake_store(unsigned long long lba)
+static void *lba2fake_store(unsigned long long lba)
 {
 	lba = do_div(lba, sdebug_store_sectors);
 
@@ -2514,8 +2514,8 @@ static int do_device_access(struct scsi_cmnd *scmd, u32 sg_skip, u64 lba,
 	return ret;
 }
 
-/* If fake_store(lba,num) compares equal to arr(num), then copy top half of
- * arr into fake_store(lba,num) and return true. If comparison fails then
+/* If lba2fake_store(lba,num) compares equal to arr(num), then copy top half of
+ * arr into lba2fake_store(lba,num) and return true. If comparison fails then
  * return false. */
 static bool comp_write_worker(u64 lba, u32 num, const u8 *arr)
 {
@@ -2643,7 +2643,7 @@ static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec,
 		if (sdt->app_tag == cpu_to_be16(0xffff))
 			continue;
 
-		ret = dif_verify(sdt, fake_store(sector), sector, ei_lba);
+		ret = dif_verify(sdt, lba2fake_store(sector), sector, ei_lba);
 		if (ret) {
 			dif_errors++;
 			return ret;
@@ -3261,10 +3261,12 @@ static int resp_write_scat(struct scsi_cmnd *scp,
 static int resp_write_same(struct scsi_cmnd *scp, u64 lba, u32 num,
 			   u32 ei_lba, bool unmap, bool ndob)
 {
+	int ret;
 	unsigned long iflags;
 	unsigned long long i;
-	int ret;
-	u64 lba_off;
+	u32 lb_size = sdebug_sector_size;
+	u64 block, lbaa;
+	u8 *fs1p;
 
 	ret = check_device_access_params(scp, lba, num);
 	if (ret)
@@ -3276,31 +3278,30 @@ static int resp_write_same(struct scsi_cmnd *scp, u64 lba, u32 num,
 		unmap_region(lba, num);
 		goto out;
 	}
-
-	lba_off = lba * sdebug_sector_size;
+	lbaa = lba;
+	block = do_div(lbaa, sdebug_store_sectors);
 	/* if ndob then zero 1 logical block, else fetch 1 logical block */
+	fs1p = fake_storep + (block * lb_size);
 	if (ndob) {
-		memset(fake_storep + lba_off, 0, sdebug_sector_size);
+		memset(fs1p, 0, lb_size);
 		ret = 0;
 	} else
-		ret = fetch_to_dev_buffer(scp, fake_storep + lba_off,
-					  sdebug_sector_size);
+		ret = fetch_to_dev_buffer(scp, fs1p, lb_size);
 
 	if (-1 == ret) {
 		write_unlock_irqrestore(&atomic_rw, iflags);
 		return DID_ERROR << 16;
-	} else if (sdebug_verbose && !ndob && (ret < sdebug_sector_size))
+	} else if (sdebug_verbose && !ndob && (ret < lb_size))
 		sdev_printk(KERN_INFO, scp->device,
 			    "%s: %s: lb size=%u, IO sent=%d bytes\n",
-			    my_name, "write same",
-			    sdebug_sector_size, ret);
+			    my_name, "write same", lb_size, ret);
 
 	/* Copy first sector to remaining blocks */
-	for (i = 1 ; i < num ; i++)
-		memcpy(fake_storep + ((lba + i) * sdebug_sector_size),
-		       fake_storep + lba_off,
-		       sdebug_sector_size);
-
+	for (i = 1 ; i < num ; i++) {
+		lbaa = lba + i;
+		block = do_div(lbaa, sdebug_store_sectors);
+		memmove(fake_storep + (block * lb_size), fs1p, lb_size);
+	}
 	if (scsi_debug_lbp())
 		map_region(lba, num);
 out:
-- 
2.19.1

[PATCH 4.20 048/171] scsi: bnx2fc: Fix error handling in probe()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b2d3492fc591b1fb46b81d79ca1fc44cac6ae0ae ]

There are two issues here.  First if cmgr->hba is not set early enough then
it leads to a NULL dereference.  Second if we don't completely initialize
cmgr->io_bdt_pool[] then we end up dereferencing uninitialized pointers.

Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/bnx2fc/bnx2fc_io.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 350257c13a5b..bc9f2a2365f4 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -240,6 +240,7 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba)
 		return NULL;
 	}
 
+	cmgr->hba = hba;
 	cmgr->free_list = kcalloc(arr_sz, sizeof(*cmgr->free_list),
 				  GFP_KERNEL);
 	if (!cmgr->free_list) {
@@ -256,7 +257,6 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba)
 		goto mem_err;
 	}
 
-	cmgr->hba = hba;
 	cmgr->cmds = (struct bnx2fc_cmd **)(cmgr + 1);
 
 	for (i = 0; i < arr_sz; i++)  {
@@ -295,7 +295,7 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba)
 
 	/* Allocate pool of io_bdts - one for each bnx2fc_cmd */
 	mem_size = num_ios * sizeof(struct io_bdt *);
-	cmgr->io_bdt_pool = kmalloc(mem_size, GFP_KERNEL);
+	cmgr->io_bdt_pool = kzalloc(mem_size, GFP_KERNEL);
 	if (!cmgr->io_bdt_pool) {
 		printk(KERN_ERR PFX "failed to alloc io_bdt_pool\n");
 		goto mem_err;
-- 
2.19.1

[PATCH 4.20 049/171] scsi: 53c700: pass correct "dev" to dma_alloc_attrs()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8437fcf14deed67e5ad90b5e8abf62fb20f30881 ]

The "hostdata->dev" pointer is NULL here.  We set "hostdata->dev = dev;"
later in the function and we also use "hostdata->dev" when we call
dma_free_attrs() in NCR_700_release().

This bug predates git version control.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/53c700.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 6be77b3aa8a5..ac79f2088b31 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -295,7 +295,7 @@ NCR_700_detect(struct scsi_host_template *tpnt,
 	if(tpnt->sdev_attrs == NULL)
 		tpnt->sdev_attrs = NCR_700_dev_attrs;
 
-	memory = dma_alloc_attrs(hostdata->dev, TOTAL_MEM_SIZE, &pScript,
+	memory = dma_alloc_attrs(dev, TOTAL_MEM_SIZE, &pScript,
 				 GFP_KERNEL, DMA_ATTR_NON_CONSISTENT);
 	if(memory == NULL) {
 		printk(KERN_ERR "53c700: Failed to allocate memory for driver, detaching\n");
-- 
2.19.1

[PATCH 4.20 050/171] platform/x86: Fix unmet dependency warning for ACPI_CMPC

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit d58bf90a32a33becec78c3034e781735049fcd25 ]

Add BACKLIGHT_LCD_SUPPORT for ACPI_CMPC to fix the
warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.

ACPI_CMPC selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_LCD_SUPPORT.

Copy BACKLIGHT_LCD_SUPPORT dependency into ACPI_CMPC to fix

WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
  Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
  Selected by [y]:
  - ACPI_CMPC [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && (RFKILL [=n] || RFKILL [=n]=n)

Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 54f6a40c75c6..458f92aac92e 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -901,6 +901,7 @@ config TOSHIBA_WMI
 config ACPI_CMPC
 	tristate "CMPC Laptop Extras"
 	depends on ACPI && INPUT
+	depends on BACKLIGHT_LCD_SUPPORT
 	depends on RFKILL || RFKILL=n
 	select BACKLIGHT_CLASS_DEVICE
 	help
-- 
2.19.1

[PATCH 4.20 051/171] platform/x86: Fix unmet dependency warning for SAMSUNG_Q10

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 0ee4b5f801b73b83a9fb3921d725f2162fd4a2e5 ]

Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the
warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.

SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_LCD_SUPPORT.

Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix:

WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
  Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
  Selected by [y]:
  - SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y]

Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 458f92aac92e..0430cad6d84e 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1125,6 +1125,7 @@ config INTEL_OAKTRAIL
 config SAMSUNG_Q10
 	tristate "Samsung Q10 Extras"
 	depends on ACPI
+	depends on BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 	---help---
 	  This driver provides support for backlight control on Samsung Q10
-- 
2.19.1

[PATCH 4.20 052/171] x86/cpu: Add Atom Tremont (Jacobsville)

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 00ae831dfe4474ef6029558f5eb3ef0332d80043 ]

Add the Atom Tremont model number to the Intel family list.

[ Tony: Also update comment at head of file to say "_X" suffix is
  also used for microserver parts. ]

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Megha Dey <megha.dey@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190125195902.17109-4-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/intel-family.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index 0dd6b0f4000e..d9a9993af882 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -6,7 +6,7 @@
  * "Big Core" Processors (Branded as Core, Xeon, etc...)
  *
  * The "_X" parts are generally the EP and EX Xeons, or the
- * "Extreme" ones, like Broadwell-E.
+ * "Extreme" ones, like Broadwell-E, or Atom microserver.
  *
  * While adding a new CPUID for a new microarchitecture, add a new
  * group to keep logically sorted out in chronological order. Within
@@ -71,6 +71,7 @@
 #define INTEL_FAM6_ATOM_GOLDMONT	0x5C /* Apollo Lake */
 #define INTEL_FAM6_ATOM_GOLDMONT_X	0x5F /* Denverton */
 #define INTEL_FAM6_ATOM_GOLDMONT_PLUS	0x7A /* Gemini Lake */
+#define INTEL_FAM6_ATOM_TREMONT_X	0x86 /* Jacobsville */
 
 /* Xeon Phi */
 
-- 
2.19.1

[PATCH 4.20 053/171] net: macb: Apply RXUBR workaround only to versions with errata

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e501070e4db0b67a4c17a5557d1e9d098f3db310 ]

The interrupt handler contains a workaround for RX hang applicable
to Zynq and AT91RM9200 only. Subsequent versions do not need this
workaround. This workaround unnecessarily resets RX whenever RX used
bit read is observed, which can be often under heavy traffic. There
is no other action performed on RX UBR interrupt. Hence introduce a
CAPS mask; enable this interrupt and workaround only on affected
versions.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb.h      |  3 +++
 drivers/net/ethernet/cadence/macb_main.c | 28 ++++++++++++++----------
 2 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 3d45f4c92cf6..9bbaad9f3d63 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -643,6 +643,7 @@
 #define MACB_CAPS_JUMBO				0x00000020
 #define MACB_CAPS_GEM_HAS_PTP			0x00000040
 #define MACB_CAPS_BD_RD_PREFETCH		0x00000080
+#define MACB_CAPS_NEEDS_RSTONUBR		0x00000100
 #define MACB_CAPS_FIFO_MODE			0x10000000
 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE	0x20000000
 #define MACB_CAPS_SG_DISABLED			0x40000000
@@ -1214,6 +1215,8 @@ struct macb {
 
 	int	rx_bd_rd_prefetch;
 	int	tx_bd_rd_prefetch;
+
+	u32	rx_intr_mask;
 };
 
 #ifdef CONFIG_MACB_USE_HWSTAMP
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 4c816e5a841f..73aa7969db96 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -56,8 +56,7 @@
 /* level of occupied TX descriptors under which we wake up TX process */
 #define MACB_TX_WAKEUP_THRESH(bp)	(3 * (bp)->tx_ring_size / 4)
 
-#define MACB_RX_INT_FLAGS	(MACB_BIT(RCOMP) | MACB_BIT(RXUBR)	\
-				 | MACB_BIT(ISR_ROVR))
+#define MACB_RX_INT_FLAGS	(MACB_BIT(RCOMP) | MACB_BIT(ISR_ROVR))
 #define MACB_TX_ERR_FLAGS	(MACB_BIT(ISR_TUND)			\
 					| MACB_BIT(ISR_RLE)		\
 					| MACB_BIT(TXERR))
@@ -1270,7 +1269,7 @@ static int macb_poll(struct napi_struct *napi, int budget)
 				queue_writel(queue, ISR, MACB_BIT(RCOMP));
 			napi_reschedule(napi);
 		} else {
-			queue_writel(queue, IER, MACB_RX_INT_FLAGS);
+			queue_writel(queue, IER, bp->rx_intr_mask);
 		}
 	}
 
@@ -1288,7 +1287,7 @@ static void macb_hresp_error_task(unsigned long data)
 	u32 ctrl;
 
 	for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) {
-		queue_writel(queue, IDR, MACB_RX_INT_FLAGS |
+		queue_writel(queue, IDR, bp->rx_intr_mask |
 					 MACB_TX_INT_FLAGS |
 					 MACB_BIT(HRESP));
 	}
@@ -1318,7 +1317,7 @@ static void macb_hresp_error_task(unsigned long data)
 
 		/* Enable interrupts */
 		queue_writel(queue, IER,
-			     MACB_RX_INT_FLAGS |
+			     bp->rx_intr_mask |
 			     MACB_TX_INT_FLAGS |
 			     MACB_BIT(HRESP));
 	}
@@ -1372,14 +1371,14 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 			    (unsigned int)(queue - bp->queues),
 			    (unsigned long)status);
 
-		if (status & MACB_RX_INT_FLAGS) {
+		if (status & bp->rx_intr_mask) {
 			/* There's no point taking any more interrupts
 			 * until we have processed the buffers. The
 			 * scheduling call may fail if the poll routine
 			 * is already scheduled, so disable interrupts
 			 * now.
 			 */
-			queue_writel(queue, IDR, MACB_RX_INT_FLAGS);
+			queue_writel(queue, IDR, bp->rx_intr_mask);
 			if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
 				queue_writel(queue, ISR, MACB_BIT(RCOMP));
 
@@ -1412,8 +1411,9 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 		/* There is a hardware issue under heavy load where DMA can
 		 * stop, this causes endless "used buffer descriptor read"
 		 * interrupts but it can be cleared by re-enabling RX. See
-		 * the at91 manual, section 41.3.1 or the Zynq manual
-		 * section 16.7.4 for details.
+		 * the at91rm9200 manual, section 41.3.1 or the Zynq manual
+		 * section 16.7.4 for details. RXUBR is only enabled for
+		 * these two versions.
 		 */
 		if (status & MACB_BIT(RXUBR)) {
 			ctrl = macb_readl(bp, NCR);
@@ -2263,7 +2263,7 @@ static void macb_init_hw(struct macb *bp)
 
 		/* Enable interrupts */
 		queue_writel(queue, IER,
-			     MACB_RX_INT_FLAGS |
+			     bp->rx_intr_mask |
 			     MACB_TX_INT_FLAGS |
 			     MACB_BIT(HRESP));
 	}
@@ -3911,6 +3911,7 @@ static const struct macb_config sama5d4_config = {
 };
 
 static const struct macb_config emac_config = {
+	.caps = MACB_CAPS_NEEDS_RSTONUBR,
 	.clk_init = at91ether_clk_init,
 	.init = at91ether_init,
 };
@@ -3932,7 +3933,8 @@ static const struct macb_config zynqmp_config = {
 };
 
 static const struct macb_config zynq_config = {
-	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_NO_GIGABIT_HALF,
+	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_NO_GIGABIT_HALF |
+		MACB_CAPS_NEEDS_RSTONUBR,
 	.dma_burst_length = 16,
 	.clk_init = macb_clk_init,
 	.init = macb_init,
@@ -4087,6 +4089,10 @@ static int macb_probe(struct platform_device *pdev)
 						macb_dma_desc_get_size(bp);
 	}
 
+	bp->rx_intr_mask = MACB_RX_INT_FLAGS;
+	if (bp->caps & MACB_CAPS_NEEDS_RSTONUBR)
+		bp->rx_intr_mask |= MACB_BIT(RXUBR);
+
 	mac = of_get_mac_address(np);
 	if (mac) {
 		ether_addr_copy(bp->dev->dev_addr, mac);
-- 
2.19.1

[PATCH 4.20 054/171] x86/boot/compressed/64: Set EFER.LME=1 in 32-bit trampoline before returning to long mode

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b677dfae5aa197afc5191755a76a8727ffca538a ]

In some old AMD KVM implementation, guest's EFER.LME bit is cleared by KVM
when the hypervsior detects that the guest sets CR0.PG to 0. This causes
the guest OS to reboot when it tries to return from 32-bit trampoline code
because the CPU is in incorrect state: CR4.PAE=1, CR0.PG=1, CS.L=1, but
EFER.LME=0.  As a precaution, set EFER.LME=1 as part of long mode
activation procedure. This extra step won't cause any harm when Linux is
booted on a bare-metal machine.

Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20190104054411.12489-1-wei@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/boot/compressed/head_64.S | 8 ++++++++
 arch/x86/boot/compressed/pgtable.h | 2 +-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 64037895b085..f105ae8651c9 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -600,6 +600,14 @@ ENTRY(trampoline_32bit_src)
 	leal	TRAMPOLINE_32BIT_PGTABLE_OFFSET(%ecx), %eax
 	movl	%eax, %cr3
 3:
+	/* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */
+	pushl	%ecx
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btsl	$_EFER_LME, %eax
+	wrmsr
+	popl	%ecx
+
 	/* Enable PAE and LA57 (if required) paging modes */
 	movl	$X86_CR4_PAE, %eax
 	cmpl	$0, %edx
diff --git a/arch/x86/boot/compressed/pgtable.h b/arch/x86/boot/compressed/pgtable.h
index 91f75638f6e6..6ff7e81b5628 100644
--- a/arch/x86/boot/compressed/pgtable.h
+++ b/arch/x86/boot/compressed/pgtable.h
@@ -6,7 +6,7 @@
 #define TRAMPOLINE_32BIT_PGTABLE_OFFSET	0
 
 #define TRAMPOLINE_32BIT_CODE_OFFSET	PAGE_SIZE
-#define TRAMPOLINE_32BIT_CODE_SIZE	0x60
+#define TRAMPOLINE_32BIT_CODE_SIZE	0x70
 
 #define TRAMPOLINE_32BIT_STACK_END	TRAMPOLINE_32BIT_SIZE
 
-- 
2.19.1

[PATCH 4.20 055/171] cifs: fix computation for MAX_SMB2_HDR_SIZE

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 58d15ed1203f4d858c339ea4d7dafa94bd2a56d3 ]

The size of the fixed part of the create response is 88 bytes not 56.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2pdu.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index 5671d5ee7f58..eaf39fb71f8b 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -84,8 +84,8 @@
 
 #define NUMBER_OF_SMB2_COMMANDS	0x0013
 
-/* 4 len + 52 transform hdr + 64 hdr + 56 create rsp */
-#define MAX_SMB2_HDR_SIZE 0x00b0
+/* 52 transform hdr + 64 hdr + 88 create rsp */
+#define MAX_SMB2_HDR_SIZE 204
 
 #define SMB2_PROTO_NUMBER cpu_to_le32(0x424d53fe)
 #define SMB2_TRANSFORM_PROTO_NUM cpu_to_le32(0x424d53fd)
-- 
2.19.1

[PATCH 4.20 056/171] x86/microcode/amd: Dont falsely trick the late loading mechanism

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 912139cfbfa6a2bc1da052314d2c29338dae1f6a ]

The load_microcode_amd() function searches for microcode patches and
attempts to apply a microcode patch if it is of different level than the
currently installed level.

While the processor won't actually load a level that is less than
what is already installed, the logic wrongly returns UCODE_NEW thus
signaling to its caller reload_store() that a late loading should be
attempted.

If the file-system contains an older microcode revision than what is
currently running, such a late microcode reload can result in these
misleading messages:

  x86/CPU: CPU features have changed after loading microcode, but might not take effect.
  x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.

These messages were issued on a system where SME/SEV are not
enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot,
early_detect_mem_encrypt() is called and cleared the SME and SEV
features in this case.

However, after the wrong late load attempt, get_cpu_cap() is called and
reloads the SME and SEV feature bits, resulting in the messages.

Update the microcode level check to not attempt microcode loading if the
current level is greater than(!) and not only equal to the current patch
level.

 [ bp: massage commit message. ]

Fixes: 2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/microcode/amd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 07b5fc00b188..a4e7e100ed26 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -707,7 +707,7 @@ load_microcode_amd(bool save, u8 family, const u8 *data, size_t size)
 	if (!p) {
 		return ret;
 	} else {
-		if (boot_cpu_data.microcode == p->patch_id)
+		if (boot_cpu_data.microcode >= p->patch_id)
 			return ret;
 
 		ret = UCODE_NEW;
-- 
2.19.1

[PATCH 4.20 057/171] apparmor: Fix warning about unused function apparmor_ipv6_postroute

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a1a02062ad466052a34a8c4323143ccf9726eb52 ]

when compiled without CONFIG_IPV6:
security/apparmor/lsm.c:1601:21: warning: ‘apparmor_ipv6_postroute’ defined but not used [-Wunused-function]
 static unsigned int apparmor_ipv6_postroute(void *priv,
                     ^~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/apparmor/lsm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index 42446a216f3b..7d1eeb084968 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -1598,12 +1598,14 @@ static unsigned int apparmor_ipv4_postroute(void *priv,
 	return apparmor_ip_postroute(priv, skb, state);
 }
 
+#if IS_ENABLED(CONFIG_IPV6)
 static unsigned int apparmor_ipv6_postroute(void *priv,
 					    struct sk_buff *skb,
 					    const struct nf_hook_state *state)
 {
 	return apparmor_ip_postroute(priv, skb, state);
 }
+#endif
 
 static const struct nf_hook_ops apparmor_nf_ops[] = {
 	{
-- 
2.19.1

[PATCH 4.20 058/171] arm64: kprobe: Always blacklist the KVM world-switch code

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f2b3d8566d81deaca31f4e3163def0bea7746e11 ]

On systems with VHE the kernel and KVM's world-switch code run at the
same exception level. Code that is only used on a VHE system does not
need to be annotated as __hyp_text as it can reside anywhere in the
 kernel text.

__hyp_text was also used to prevent kprobes from patching breakpoint
instructions into this region, as this code runs at a different
exception level. While this is no longer true with VHE, KVM still
switches VBAR_EL1, meaning a kprobe's breakpoint executed in the
world-switch code will cause a hyp-panic.

Move the __hyp_text check in the kprobes blacklist so it applies on
VHE systems too, to cover the common code and guest enter/exit
assembly.

Fixes: 888b3c8720e0 ("arm64: Treat all entry code as non-kprobe-able")
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/probes/kprobes.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index 2a5b338b2542..f17afb99890c 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -478,13 +478,13 @@ bool arch_within_kprobe_blacklist(unsigned long addr)
 	    addr < (unsigned long)__entry_text_end) ||
 	    (addr >= (unsigned long)__idmap_text_start &&
 	    addr < (unsigned long)__idmap_text_end) ||
+	    (addr >= (unsigned long)__hyp_text_start &&
+	    addr < (unsigned long)__hyp_text_end) ||
 	    !!search_exception_tables(addr))
 		return true;
 
 	if (!is_kernel_in_hyp_mode()) {
-		if ((addr >= (unsigned long)__hyp_text_start &&
-		    addr < (unsigned long)__hyp_text_end) ||
-		    (addr >= (unsigned long)__hyp_idmap_text_start &&
+		if ((addr >= (unsigned long)__hyp_idmap_text_start &&
 		    addr < (unsigned long)__hyp_idmap_text_end))
 			return true;
 	}
-- 
2.19.1

[PATCH 4.20 059/171] apparmor: Fix aa_label_build() error handling for failed merges

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit d6d478aee003e19ef90321176552a8ad2929a47f ]

aa_label_merge() can return NULL for memory allocations failures
make sure to handle and set the correct error in this case.

Reported-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/apparmor/domain.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c
index 08c88de0ffda..11975ec8d566 100644
--- a/security/apparmor/domain.c
+++ b/security/apparmor/domain.c
@@ -1444,7 +1444,10 @@ int aa_change_profile(const char *fqname, int flags)
 			new = aa_label_merge(label, target, GFP_KERNEL);
 		if (IS_ERR_OR_NULL(new)) {
 			info = "failed to build target label";
-			error = PTR_ERR(new);
+			if (!new)
+				error = -ENOMEM;
+			else
+				error = PTR_ERR(new);
 			new = NULL;
 			perms.allow = 0;
 			goto audit;
-- 
2.19.1

[PATCH 4.20 060/171] x86/kexec: Dont setup EFI info if EFI runtime is not enabled

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2aa958c99c7fd3162b089a1a56a34a0cdb778de1 ]

Kexec-ing a kernel with "efi=noruntime" on the first kernel's command
line causes the following null pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  #PF error: [normal kernel read fault]
  Call Trace:
   efi_runtime_map_copy+0x28/0x30
   bzImage64_load+0x688/0x872
   arch_kexec_kernel_image_load+0x6d/0x70
   kimage_file_alloc_init+0x13e/0x220
   __x64_sys_kexec_file_load+0x144/0x290
   do_syscall_64+0x55/0x1a0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Just skip the EFI info setup if EFI runtime services are not enabled.

 [ bp: Massage commit message. ]

Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: bhe@redhat.com
Cc: David Howells <dhowells@redhat.com>
Cc: erik.schmauss@intel.com
Cc: fanc.fnst@cn.fujitsu.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kexec@lists.infradead.org
Cc: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: Philipp Rudo <prudo@linux.vnet.ibm.com>
Cc: rafael.j.wysocki@intel.com
Cc: robert.moore@intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yannik Sembritzki <yannik@sembritzki.me>
Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/kexec-bzimage64.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index 278cd07228dd..9490a2845f14 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -167,6 +167,9 @@ setup_efi_state(struct boot_params *params, unsigned long params_load_addr,
 	struct efi_info *current_ei = &boot_params.efi_info;
 	struct efi_info *ei = &params->efi_info;
 
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
+		return 0;
+
 	if (!current_ei->efi_memmap_size)
 		return 0;
 
-- 
2.19.1

[PATCH 4.20 061/171] proc: fix /proc/net/* after setns(2)

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1fde6f21d90f8ba5da3cb9c54ca991ed72696c43 ]

/proc entries under /proc/net/* can't be cached into dcache because
setns(2) can change current net namespace.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: avoid vim miscolorization]
[adobriyan@gmail.com: write test, add dummy ->d_revalidate hook: necessary if /proc/net/* is pinned at setns time]
  Link: http://lkml.kernel.org/r/20190108192350.GA12034@avx2
Link: http://lkml.kernel.org/r/20190107162336.GA9239@avx2
Fixes: 1da4d377f943fe4194ffb9fb9c26cc58fad4dd24 ("proc: revalidate misc dentries")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Mateusz Stępień <mateusz.stepien@netrounds.com>
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/proc/generic.c                           |   4 +-
 fs/proc/internal.h                          |   1 +
 fs/proc/proc_net.c                          |  20 +++
 tools/testing/selftests/proc/.gitignore     |   1 +
 tools/testing/selftests/proc/Makefile       |   1 +
 tools/testing/selftests/proc/setns-dcache.c | 129 ++++++++++++++++++++
 6 files changed, 155 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/proc/setns-dcache.c

diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 8ae109429a88..e39bac94dead 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -256,7 +256,7 @@ struct dentry *proc_lookup_de(struct inode *dir, struct dentry *dentry,
 		inode = proc_get_inode(dir->i_sb, de);
 		if (!inode)
 			return ERR_PTR(-ENOMEM);
-		d_set_d_op(dentry, &proc_misc_dentry_ops);
+		d_set_d_op(dentry, de->proc_dops);
 		return d_splice_alias(inode, dentry);
 	}
 	read_unlock(&proc_subdir_lock);
@@ -429,6 +429,8 @@ static struct proc_dir_entry *__proc_create(struct proc_dir_entry **parent,
 	INIT_LIST_HEAD(&ent->pde_openers);
 	proc_set_user(ent, (*parent)->uid, (*parent)->gid);
 
+	ent->proc_dops = &proc_misc_dentry_ops;
+
 out:
 	return ent;
 }
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 5185d7f6a51e..95b14196f284 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -44,6 +44,7 @@ struct proc_dir_entry {
 	struct completion *pde_unload_completion;
 	const struct inode_operations *proc_iops;
 	const struct file_operations *proc_fops;
+	const struct dentry_operations *proc_dops;
 	union {
 		const struct seq_operations *seq_ops;
 		int (*single_show)(struct seq_file *, void *);
diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c
index d5e0fcb3439e..a7b12435519e 100644
--- a/fs/proc/proc_net.c
+++ b/fs/proc/proc_net.c
@@ -38,6 +38,22 @@ static struct net *get_proc_net(const struct inode *inode)
 	return maybe_get_net(PDE_NET(PDE(inode)));
 }
 
+static int proc_net_d_revalidate(struct dentry *dentry, unsigned int flags)
+{
+	return 0;
+}
+
+static const struct dentry_operations proc_net_dentry_ops = {
+	.d_revalidate	= proc_net_d_revalidate,
+	.d_delete	= always_delete_dentry,
+};
+
+static void pde_force_lookup(struct proc_dir_entry *pde)
+{
+	/* /proc/net/ entries can be changed under us by setns(CLONE_NEWNET) */
+	pde->proc_dops = &proc_net_dentry_ops;
+}
+
 static int seq_open_net(struct inode *inode, struct file *file)
 {
 	unsigned int state_size = PDE(inode)->state_size;
@@ -90,6 +106,7 @@ struct proc_dir_entry *proc_create_net_data(const char *name, umode_t mode,
 	p = proc_create_reg(name, mode, &parent, data);
 	if (!p)
 		return NULL;
+	pde_force_lookup(p);
 	p->proc_fops = &proc_net_seq_fops;
 	p->seq_ops = ops;
 	p->state_size = state_size;
@@ -133,6 +150,7 @@ struct proc_dir_entry *proc_create_net_data_write(const char *name, umode_t mode
 	p = proc_create_reg(name, mode, &parent, data);
 	if (!p)
 		return NULL;
+	pde_force_lookup(p);
 	p->proc_fops = &proc_net_seq_fops;
 	p->seq_ops = ops;
 	p->state_size = state_size;
@@ -181,6 +199,7 @@ struct proc_dir_entry *proc_create_net_single(const char *name, umode_t mode,
 	p = proc_create_reg(name, mode, &parent, data);
 	if (!p)
 		return NULL;
+	pde_force_lookup(p);
 	p->proc_fops = &proc_net_single_fops;
 	p->single_show = show;
 	return proc_register(parent, p);
@@ -223,6 +242,7 @@ struct proc_dir_entry *proc_create_net_single_write(const char *name, umode_t mo
 	p = proc_create_reg(name, mode, &parent, data);
 	if (!p)
 		return NULL;
+	pde_force_lookup(p);
 	p->proc_fops = &proc_net_single_fops;
 	p->single_show = show;
 	p->write = write;
diff --git a/tools/testing/selftests/proc/.gitignore b/tools/testing/selftests/proc/.gitignore
index 82121a81681f..29bac5ef9a93 100644
--- a/tools/testing/selftests/proc/.gitignore
+++ b/tools/testing/selftests/proc/.gitignore
@@ -10,4 +10,5 @@
 /proc-uptime-002
 /read
 /self
+/setns-dcache
 /thread-self
diff --git a/tools/testing/selftests/proc/Makefile b/tools/testing/selftests/proc/Makefile
index 1c12c34cf85d..434d033ee067 100644
--- a/tools/testing/selftests/proc/Makefile
+++ b/tools/testing/selftests/proc/Makefile
@@ -14,6 +14,7 @@ TEST_GEN_PROGS += proc-uptime-001
 TEST_GEN_PROGS += proc-uptime-002
 TEST_GEN_PROGS += read
 TEST_GEN_PROGS += self
+TEST_GEN_PROGS += setns-dcache
 TEST_GEN_PROGS += thread-self
 
 include ../lib.mk
diff --git a/tools/testing/selftests/proc/setns-dcache.c b/tools/testing/selftests/proc/setns-dcache.c
new file mode 100644
index 000000000000..60ab197a73fc
--- /dev/null
+++ b/tools/testing/selftests/proc/setns-dcache.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright © 2019 Alexey Dobriyan <adobriyan@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+/*
+ * Test that setns(CLONE_NEWNET) points to new /proc/net content even
+ * if old one is in dcache.
+ *
+ * FIXME /proc/net/unix is under CONFIG_UNIX which can be disabled.
+ */
+#undef NDEBUG
+#include <assert.h>
+#include <errno.h>
+#include <sched.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/socket.h>
+
+static pid_t pid = -1;
+
+static void f(void)
+{
+	if (pid > 0) {
+		kill(pid, SIGTERM);
+	}
+}
+
+int main(void)
+{
+	int fd[2];
+	char _ = 0;
+	int nsfd;
+
+	atexit(f);
+
+	/* Check for priviledges and syscall availability straight away. */
+	if (unshare(CLONE_NEWNET) == -1) {
+		if (errno == ENOSYS || errno == EPERM) {
+			return 4;
+		}
+		return 1;
+	}
+	/* Distinguisher between two otherwise empty net namespaces. */
+	if (socket(AF_UNIX, SOCK_STREAM, 0) == -1) {
+		return 1;
+	}
+
+	if (pipe(fd) == -1) {
+		return 1;
+	}
+
+	pid = fork();
+	if (pid == -1) {
+		return 1;
+	}
+
+	if (pid == 0) {
+		if (unshare(CLONE_NEWNET) == -1) {
+			return 1;
+		}
+
+		if (write(fd[1], &_, 1) != 1) {
+			return 1;
+		}
+
+		pause();
+
+		return 0;
+	}
+
+	if (read(fd[0], &_, 1) != 1) {
+		return 1;
+	}
+
+	{
+		char buf[64];
+		snprintf(buf, sizeof(buf), "/proc/%u/ns/net", pid);
+		nsfd = open(buf, O_RDONLY);
+		if (nsfd == -1) {
+			return 1;
+		}
+	}
+
+	/* Reliably pin dentry into dcache. */
+	(void)open("/proc/net/unix", O_RDONLY);
+
+	if (setns(nsfd, CLONE_NEWNET) == -1) {
+		return 1;
+	}
+
+	kill(pid, SIGTERM);
+	pid = 0;
+
+	{
+		char buf[4096];
+		ssize_t rv;
+		int fd;
+
+		fd = open("/proc/net/unix", O_RDONLY);
+		if (fd == -1) {
+			return 1;
+		}
+
+#define S "Num       RefCount Protocol Flags    Type St Inode Path\n"
+		rv = read(fd, buf, sizeof(buf));
+
+		assert(rv == strlen(S));
+		assert(memcmp(buf, S, strlen(S)) == 0);
+	}
+
+	return 0;
+}
-- 
2.19.1

[PATCH 4.20 062/171] x86_64: increase stack size for KASAN_EXTRA

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a8e911d13540487942d53137c156bd7707f66e5d ]

If the kernel is configured with KASAN_EXTRA, the stack size is
increasted significantly because this option sets "-fstack-reuse" to
"none" in GCC [1].  As a result, it triggers stack overrun quite often
with 32k stack size compiled using GCC 8.  For example, this reproducer

  https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c

triggers a "corrupted stack end detected inside scheduler" very reliably
with CONFIG_SCHED_STACK_END_CHECK enabled.

There are just too many functions that could have a large stack with
KASAN_EXTRA due to large local variables that have been called over and
over again without being able to reuse the stacks.  Some noticiable ones
are

  size
  7648 shrink_page_list
  3584 xfs_rmap_convert
  3312 migrate_page_move_mapping
  3312 dev_ethtool
  3200 migrate_misplaced_transhuge_page
  3168 copy_process

There are other 49 functions are over 2k in size while compiling kernel
with "-Wframe-larger-than=" even with a related minimal config on this
machine.  Hence, it is too much work to change Makefiles for each object
to compile without "-fsanitize-address-use-after-scope" individually.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23

Although there is a patch in GCC 9 to help the situation, GCC 9 probably
won't be released in a few months and then it probably take another
6-month to 1-year for all major distros to include it as a default.
Hence, the stack usage with KASAN_EXTRA can be revisited again in 2020
when GCC 9 is everywhere.  Until then, this patch will help users avoid
stack overrun.

This has already been fixed for arm64 for the same reason via
6e8830674ea ("arm64: kasan: Increase stack size for KASAN_EXTRA").

Link: http://lkml.kernel.org/r/20190109215209.2903-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/page_64_types.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 8f657286d599..0ce558a8150d 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -7,7 +7,11 @@
 #endif
 
 #ifdef CONFIG_KASAN
+#ifdef CONFIG_KASAN_EXTRA
+#define KASAN_STACK_ORDER 2
+#else
 #define KASAN_STACK_ORDER 1
+#endif
 #else
 #define KASAN_STACK_ORDER 0
 #endif
-- 
2.19.1

[PATCH 4.20 063/171] mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit efad4e475c312456edb3c789d0996d12ed744c13 ]

Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2.

Mikhail Zaslonko has posted fixes for the two bugs quite some time ago
[1].  I have pushed back on those fixes because I believed that it is
much better to plug the problem at the initialization time rather than
play whack-a-mole all over the hotplug code and find all the places
which expect the full memory section to be initialized.

We have ended up with commit 2830bf6f05fb ("mm, memory_hotplug:
initialize struct pages for the full memory section") merged and cause a
regression [2][3].  The reason is that there might be memory layouts
when two NUMA nodes share the same memory section so the merged fix is
simply incorrect.

In order to plug this hole we really have to be zone range aware in
those handlers.  I have split up the original patch into two.  One is
unchanged (patch 2) and I took a different approach for `removable'
crash.

[1] http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1666948
[3] http://lkml.kernel.org/r/20190125163938.GA20411@dhcp22.suse.cz

This patch (of 2):

Mikhail has reported the following VM_BUG_ON triggered when reading sysfs
removable state of a memory block:

 page:000003d08300c000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
   is_mem_section_removable+0xb4/0x190
   show_mem_removable+0x9a/0xd8
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   is_mem_section_removable+0xb4/0x190
 Kernel panic - not syncing: Fatal exception: panic_on_oops

The reason is that the memory block spans the zone boundary and we are
stumbling over an unitialized struct page.  Fix this by enforcing zone
range in is_mem_section_removable so that we never run away from a zone.

Link: http://lkml.kernel.org/r/20190128144506.15603-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Debugged-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/memory_hotplug.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 21d94b5677e8..5ce0d929ff48 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1234,7 +1234,8 @@ static bool is_pageblock_removable_nolock(struct page *page)
 bool is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages)
 {
 	struct page *page = pfn_to_page(start_pfn);
-	struct page *end_page = page + nr_pages;
+	unsigned long end_pfn = min(start_pfn + nr_pages, zone_end_pfn(page_zone(page)));
+	struct page *end_page = pfn_to_page(end_pfn);
 
 	/* Check the starting page of each pageblock within the range */
 	for (; page < end_page; page = next_active_pageblock(page)) {
-- 
2.19.1

[PATCH 4.20 064/171] mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 24feb47c5fa5b825efb0151f28906dfdad027e61 ]

If memory end is not aligned with the sparse memory section boundary,
the mapping of such a section is only partly initialized.  This may lead
to VM_BUG_ON due to uninitialized struct pages access from
test_pages_in_a_zone() function triggered by memory_hotplug sysfs
handlers.

Here are the the panic examples:
 CONFIG_DEBUG_VM_PGFLAGS=y
 kernel parameter mem=2050M
 --------------------------
 page:000003d082008000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
   test_pages_in_a_zone+0xde/0x160
   show_valid_zones+0x5c/0x190
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   test_pages_in_a_zone+0xde/0x160
 Kernel panic - not syncing: Fatal exception: panic_on_oops

Fix this by checking whether the pfn to check is within the zone.

[mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com]
Link: http://lkml.kernel.org/r/20190128144506.15603-3-mhocko@kernel.org

[mhocko@suse.com: separated this change from
http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/memory_hotplug.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 5ce0d929ff48..488aa11495d2 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1275,6 +1275,9 @@ int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn,
 				i++;
 			if (i == MAX_ORDER_NR_PAGES || pfn + i >= end_pfn)
 				continue;
+			/* Check if we got outside of the zone */
+			if (zone && !zone_spans_pfn(zone, pfn + i))
+				return 0;
 			page = pfn_to_page(pfn + i);
 			if (zone && page_zone(page) != zone)
 				return 0;
-- 
2.19.1

[PATCH 4.20 065/171] psi: fix aggregation idle shut-off

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1b69ac6b40ebd85eed73e4dbccde2a36961ab990 ]

psi has provisions to shut off the periodic aggregation worker when
there is a period of no task activity - and thus no data that needs
aggregating.  However, while developing psi monitoring, Suren noticed
that the aggregation clock currently won't stay shut off for good.

Debugging this revealed a flaw in the idle design: an aggregation run
will see no task activity and decide to go to sleep; shortly thereafter,
the kworker thread that executed the aggregation will go idle and cause
a scheduling change, during which the psi callback will kick the
!pending worker again.  This will ping-pong forever, and is equivalent
to having no shut-off logic at all (but with more code!)

Fix this by exempting aggregation workers from psi's clock waking logic
when the state change is them going to sleep.  To do this, tag workers
with the last work function they executed, and if in psi we see a worker
going to sleep after aggregating psi data, we will not reschedule the
aggregation work item.

What if the worker is also executing other items before or after?

Any psi state times that were incurred by work items preceding the
aggregation work will have been collected from the per-cpu buckets
during the aggregation itself.  If there are work items following the
aggregation work, the worker's last_func tag will be overwritten and the
aggregator will be kept alive to process this genuine new activity.

If the aggregation work is the last thing the worker does, and we decide
to go idle, the brief period of non-idle time incurred between the
aggregation run and the kworker's dequeue will be stranded in the
per-cpu buckets until the clock is woken by later activity.  But that
should not be a problem.  The buckets can hold 4s worth of time, and
future activity will wake the clock with a 2s delay, giving us 2s worth
of data we can leave behind when disabling aggregation.  If it takes a
worker more than two seconds to go idle after it finishes its last work
item, we likely have bigger problems in the system, and won't notice one
sample that was averaged with a bogus per-CPU weight.

Link: http://lkml.kernel.org/r/20190116193501.1910-1-hannes@cmpxchg.org
Fixes: eb414681d5a0 ("psi: pressure stall information for CPU, memory, and IO")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/psi.c          | 21 +++++++++++++++++----
 kernel/workqueue.c          | 23 +++++++++++++++++++++++
 kernel/workqueue_internal.h |  6 +++++-
 3 files changed, 45 insertions(+), 5 deletions(-)

diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c
index fe24de3fbc93..c3484785b179 100644
--- a/kernel/sched/psi.c
+++ b/kernel/sched/psi.c
@@ -124,6 +124,7 @@
  * sampling of the aggregate task states would be.
  */
 
+#include "../workqueue_internal.h"
 #include <linux/sched/loadavg.h>
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
@@ -480,9 +481,6 @@ static void psi_group_change(struct psi_group *group, int cpu,
 			groupc->tasks[t]++;
 
 	write_seqcount_end(&groupc->seq);
-
-	if (!delayed_work_pending(&group->clock_work))
-		schedule_delayed_work(&group->clock_work, PSI_FREQ);
 }
 
 static struct psi_group *iterate_groups(struct task_struct *task, void **iter)
@@ -513,6 +511,7 @@ void psi_task_change(struct task_struct *task, int clear, int set)
 {
 	int cpu = task_cpu(task);
 	struct psi_group *group;
+	bool wake_clock = true;
 	void *iter = NULL;
 
 	if (!task->pid)
@@ -530,8 +529,22 @@ void psi_task_change(struct task_struct *task, int clear, int set)
 	task->psi_flags &= ~clear;
 	task->psi_flags |= set;
 
-	while ((group = iterate_groups(task, &iter)))
+	/*
+	 * Periodic aggregation shuts off if there is a period of no
+	 * task changes, so we wake it back up if necessary. However,
+	 * don't do this if the task change is the aggregation worker
+	 * itself going to sleep, or we'll ping-pong forever.
+	 */
+	if (unlikely((clear & TSK_RUNNING) &&
+		     (task->flags & PF_WQ_WORKER) &&
+		     wq_worker_last_func(task) == psi_update_work))
+		wake_clock = false;
+
+	while ((group = iterate_groups(task, &iter))) {
 		psi_group_change(group, cpu, clear, set);
+		if (wake_clock && !delayed_work_pending(&group->clock_work))
+			schedule_delayed_work(&group->clock_work, PSI_FREQ);
+	}
 }
 
 void psi_memstall_tick(struct task_struct *task, int cpu)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 0280deac392e..288b2105bbb1 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -909,6 +909,26 @@ struct task_struct *wq_worker_sleeping(struct task_struct *task)
 	return to_wakeup ? to_wakeup->task : NULL;
 }
 
+/**
+ * wq_worker_last_func - retrieve worker's last work function
+ *
+ * Determine the last function a worker executed. This is called from
+ * the scheduler to get a worker's last known identity.
+ *
+ * CONTEXT:
+ * spin_lock_irq(rq->lock)
+ *
+ * Return:
+ * The last work function %current executed as a worker, NULL if it
+ * hasn't executed any work yet.
+ */
+work_func_t wq_worker_last_func(struct task_struct *task)
+{
+	struct worker *worker = kthread_data(task);
+
+	return worker->last_func;
+}
+
 /**
  * worker_set_flags - set worker flags and adjust nr_running accordingly
  * @worker: self
@@ -2184,6 +2204,9 @@ __acquires(&pool->lock)
 	if (unlikely(cpu_intensive))
 		worker_clr_flags(worker, WORKER_CPU_INTENSIVE);
 
+	/* tag the worker for identification in schedule() */
+	worker->last_func = worker->current_func;
+
 	/* we're done with it, release */
 	hash_del(&worker->hentry);
 	worker->current_work = NULL;
diff --git a/kernel/workqueue_internal.h b/kernel/workqueue_internal.h
index 66fbb5a9e633..cb68b03ca89a 100644
--- a/kernel/workqueue_internal.h
+++ b/kernel/workqueue_internal.h
@@ -53,6 +53,9 @@ struct worker {
 
 	/* used only by rescuers to point to the target workqueue */
 	struct workqueue_struct	*rescue_wq;	/* I: the workqueue to rescue */
+
+	/* used by the scheduler to determine a worker's last known identity */
+	work_func_t		last_func;
 };
 
 /**
@@ -67,9 +70,10 @@ static inline struct worker *current_wq_worker(void)
 
 /*
  * Scheduler hooks for concurrency managed workqueue.  Only to be used from
- * sched/core.c and workqueue.c.
+ * sched/ and workqueue.c.
  */
 void wq_worker_waking_up(struct task_struct *task, int cpu);
 struct task_struct *wq_worker_sleeping(struct task_struct *task);
+work_func_t wq_worker_last_func(struct task_struct *task);
 
 #endif /* _KERNEL_WORKQUEUE_INTERNAL_H */
-- 
2.19.1

[PATCH 4.20 066/171] lib/test_kmod.c: potential double free in error handling

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit db7ddeab3ce5d64c9696e70d61f45ea9909cd196 ]

There is a copy and paste bug so we set "config->test_driver" to NULL
twice instead of setting "config->test_fs".  Smatch complains that it
leads to a double free:

  lib/test_kmod.c:840 __kmod_config_init() warn: 'config->test_fs' double freed

Link: http://lkml.kernel.org/r/20190121140011.GA14283@kadam
Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_kmod.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/test_kmod.c b/lib/test_kmod.c
index d82d022111e0..9cf77628fc91 100644
--- a/lib/test_kmod.c
+++ b/lib/test_kmod.c
@@ -632,7 +632,7 @@ static void __kmod_config_free(struct test_config *config)
 	config->test_driver = NULL;
 
 	kfree_const(config->test_fs);
-	config->test_driver = NULL;
+	config->test_fs = NULL;
 }
 
 static void kmod_config_free(struct kmod_test_device *test_dev)
-- 
2.19.1

[PATCH 4.20 067/171] fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c27d82f52f75fc9d8d9d40d120d2a96fdeeada5e ]

When superblock has lots of inodes without any pagecache (like is the
case for /proc), drop_pagecache_sb() will iterate through all of them
without dropping sb->s_inode_list_lock which can lead to softlockups
(one of our customers hit this).

Fix the problem by going to the slow path and doing cond_resched() in
case the process needs rescheduling.

Link: http://lkml.kernel.org/r/20190114085343.15011-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/drop_caches.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/fs/drop_caches.c b/fs/drop_caches.c
index 82377017130f..d31b6c72b476 100644
--- a/fs/drop_caches.c
+++ b/fs/drop_caches.c
@@ -21,8 +21,13 @@ static void drop_pagecache_sb(struct super_block *sb, void *unused)
 	spin_lock(&sb->s_inode_list_lock);
 	list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
 		spin_lock(&inode->i_lock);
+		/*
+		 * We must skip inodes in unusual state. We may also skip
+		 * inodes without pages but we deliberately won't in case
+		 * we need to reschedule to avoid softlockups.
+		 */
 		if ((inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) ||
-		    (inode->i_mapping->nrpages == 0)) {
+		    (inode->i_mapping->nrpages == 0 && !need_resched())) {
 			spin_unlock(&inode->i_lock);
 			continue;
 		}
@@ -30,6 +35,7 @@ static void drop_pagecache_sb(struct super_block *sb, void *unused)
 		spin_unlock(&inode->i_lock);
 		spin_unlock(&sb->s_inode_list_lock);
 
+		cond_resched();
 		invalidate_mapping_pages(inode->i_mapping, 0, -1);
 		iput(toput_inode);
 		toput_inode = inode;
-- 
2.19.1

[PATCH 4.20 068/171] autofs: drop dentry reference only when it is never used

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 63ce5f552beb9bdb41546b3a26c4374758b21815 ]

autofs_expire_run() calls dput(dentry) to drop the reference count of
dentry.  However, dentry is read via autofs_dentry_ino(dentry) after
that.  This may result in a use-free-bug.  The patch drops the reference
count of dentry only when it is never used.

Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto-themaw-net
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/autofs/expire.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/autofs/expire.c b/fs/autofs/expire.c
index d441244b79df..28d9c2b1b3bb 100644
--- a/fs/autofs/expire.c
+++ b/fs/autofs/expire.c
@@ -596,7 +596,6 @@ int autofs_expire_run(struct super_block *sb,
 	pkt.len = dentry->d_name.len;
 	memcpy(pkt.name, dentry->d_name.name, pkt.len);
 	pkt.name[pkt.len] = '\0';
-	dput(dentry);
 
 	if (copy_to_user(pkt_p, &pkt, sizeof(struct autofs_packet_expire)))
 		ret = -EFAULT;
@@ -609,6 +608,8 @@ int autofs_expire_run(struct super_block *sb,
 	complete_all(&ino->expire_complete);
 	spin_unlock(&sbi->fs_lock);
 
+	dput(dentry);
+
 	return ret;
 }
 
-- 
2.19.1

[PATCH 4.20 069/171] autofs: fix error return in autofs_fill_super()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f585b283e3f025754c45bbe7533fc6e5c4643700 ]

In autofs_fill_super() on error of get inode/make root dentry the return
should be ENOMEM as this is the only failure case of the called
functions.

Link: http://lkml.kernel.org/r/154725123240.11260.796773942606871359.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/autofs/inode.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/autofs/inode.c b/fs/autofs/inode.c
index 846c052569dd..3c14a8e45ffb 100644
--- a/fs/autofs/inode.c
+++ b/fs/autofs/inode.c
@@ -255,8 +255,10 @@ int autofs_fill_super(struct super_block *s, void *data, int silent)
 	}
 	root_inode = autofs_get_inode(s, S_IFDIR | 0755);
 	root = d_make_root(root_inode);
-	if (!root)
+	if (!root) {
+		ret = -ENOMEM;
 		goto fail_ino;
+	}
 	pipe = NULL;
 
 	root->d_fsdata = ino;
-- 
2.19.1

[PATCH 4.20 070/171] mm, memory_hotplug: fix off-by-one in is_pageblock_removable

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 891cb2a72d821f930a39d5900cb7a3aa752c1d5b ]

Rong Chen has reported the following boot crash:

    PGD 0 P4D 0
    Oops: 0000 [#1] PREEMPT SMP PTI
    CPU: 1 PID: 239 Comm: udevd Not tainted 5.0.0-rc4-00149-gefad4e4 #1
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
    RIP: 0010:page_mapping+0x12/0x80
    Code: 5d c3 48 89 df e8 0e ad 02 00 85 c0 75 da 89 e8 5b 5d c3 0f 1f 44 00 00 53 48 89 fb 48 8b 43 08 48 8d 50 ff a8 01 48 0f 45 da <48> 8b 53 08 48 8d 42 ff 83 e2 01 48 0f 44 c3 48 83 38 ff 74 2f 48
    RSP: 0018:ffff88801fa87cd8 EFLAGS: 00010202
    RAX: ffffffffffffffff RBX: fffffffffffffffe RCX: 000000000000000a
    RDX: fffffffffffffffe RSI: ffffffff820b9a20 RDI: ffff88801e5c0000
    RBP: 6db6db6db6db6db7 R08: ffff88801e8bb000 R09: 0000000001b64d13
    R10: ffff88801fa87cf8 R11: 0000000000000001 R12: ffff88801e640000
    R13: ffffffff820b9a20 R14: ffff88801f145258 R15: 0000000000000001
    FS:  00007fb2079817c0(0000) GS:ffff88801dd00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000006 CR3: 000000001fa82000 CR4: 00000000000006a0
    Call Trace:
     __dump_page+0x14/0x2c0
     is_mem_section_removable+0x24c/0x2c0
     removable_show+0x87/0xa0
     dev_attr_show+0x25/0x60
     sysfs_kf_seq_show+0xba/0x110
     seq_read+0x196/0x3f0
     __vfs_read+0x34/0x180
     vfs_read+0xa0/0x150
     ksys_read+0x44/0xb0
     do_syscall_64+0x5e/0x4a0
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

and bisected it down to commit efad4e475c31 ("mm, memory_hotplug:
is_mem_section_removable do not pass the end of a zone").

The reason for the crash is that the mapping is garbage for poisoned
(uninitialized) page.  This shouldn't happen as all pages in the zone's
boundary should be initialized.

Later debugging revealed that the actual problem is an off-by-one when
evaluating the end_page.  'start_pfn + nr_pages' resp 'zone_end_pfn'
refers to a pfn after the range and as such it might belong to a
differen memory section.

This along with CONFIG_SPARSEMEM then makes the loop condition
completely bogus because a pointer arithmetic doesn't work for pages
from two different sections in that memory model.

Fix the issue by reworking is_pageblock_removable to be pfn based and
only use struct page where necessary.  This makes the code slightly
easier to follow and we will remove the problematic pointer arithmetic
completely.

Link: http://lkml.kernel.org/r/20190218181544.14616-1-mhocko@kernel.org
Fixes: efad4e475c31 ("mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: <rong.a.chen@intel.com>
Tested-by: <rong.a.chen@intel.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/memory_hotplug.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 488aa11495d2..cb201163666f 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1189,11 +1189,13 @@ static inline int pageblock_free(struct page *page)
 	return PageBuddy(page) && page_order(page) >= pageblock_order;
 }
 
-/* Return the start of the next active pageblock after a given page */
-static struct page *next_active_pageblock(struct page *page)
+/* Return the pfn of the start of the next active pageblock after a given pfn */
+static unsigned long next_active_pageblock(unsigned long pfn)
 {
+	struct page *page = pfn_to_page(pfn);
+
 	/* Ensure the starting page is pageblock-aligned */
-	BUG_ON(page_to_pfn(page) & (pageblock_nr_pages - 1));
+	BUG_ON(pfn & (pageblock_nr_pages - 1));
 
 	/* If the entire pageblock is free, move to the end of free page */
 	if (pageblock_free(page)) {
@@ -1201,16 +1203,16 @@ static struct page *next_active_pageblock(struct page *page)
 		/* be careful. we don't have locks, page_order can be changed.*/
 		order = page_order(page);
 		if ((order < MAX_ORDER) && (order >= pageblock_order))
-			return page + (1 << order);
+			return pfn + (1 << order);
 	}
 
-	return page + pageblock_nr_pages;
+	return pfn + pageblock_nr_pages;
 }
 
-static bool is_pageblock_removable_nolock(struct page *page)
+static bool is_pageblock_removable_nolock(unsigned long pfn)
 {
+	struct page *page = pfn_to_page(pfn);
 	struct zone *zone;
-	unsigned long pfn;
 
 	/*
 	 * We have to be careful here because we are iterating over memory
@@ -1233,13 +1235,14 @@ static bool is_pageblock_removable_nolock(struct page *page)
 /* Checks if this range of memory is likely to be hot-removable. */
 bool is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages)
 {
-	struct page *page = pfn_to_page(start_pfn);
-	unsigned long end_pfn = min(start_pfn + nr_pages, zone_end_pfn(page_zone(page)));
-	struct page *end_page = pfn_to_page(end_pfn);
+	unsigned long end_pfn, pfn;
+
+	end_pfn = min(start_pfn + nr_pages,
+			zone_end_pfn(page_zone(pfn_to_page(start_pfn))));
 
 	/* Check the starting page of each pageblock within the range */
-	for (; page < end_page; page = next_active_pageblock(page)) {
-		if (!is_pageblock_removable_nolock(page))
+	for (pfn = start_pfn; pfn < end_pfn; pfn = next_active_pageblock(pfn)) {
+		if (!is_pageblock_removable_nolock(pfn))
 			return false;
 		cond_resched();
 	}
-- 
2.19.1

[PATCH 4.20 071/171] ARM: OMAP: dts: N950/N9: fix onenand timings

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8443e4843e1c2594bf5664e1d993a1be71d1befb ]

Commit a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT")
started using DT specified timings for GPMC, and as a result the
OneNAND stopped working on N950/N9 as we had wrong values in the DT.
Fix by updating the values to bootloader timings that have been tested
to be working on both Nokia N950 and N9.

Fixes: a758f50f10cf ("mtd: onenand: omap2: Configure driver from DT")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-n950-n9.dtsi | 42 ++++++++++++++++++----------
 1 file changed, 28 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 0d9b85317529..e142e6c70a59 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -370,6 +370,19 @@
 		compatible = "ti,omap2-onenand";
 		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
 
+		/*
+		 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+		 * bootloader set values when booted with v4.19 using both N950
+		 * and N9 devices (OneNAND Manufacturer: Samsung):
+		 *
+		 *   gpmc cs0 before gpmc_cs_program_settings:
+		 *   cs0 GPMC_CS_CONFIG1: 0xfd001202
+		 *   cs0 GPMC_CS_CONFIG2: 0x00181800
+		 *   cs0 GPMC_CS_CONFIG3: 0x00030300
+		 *   cs0 GPMC_CS_CONFIG4: 0x18001804
+		 *   cs0 GPMC_CS_CONFIG5: 0x03171d1d
+		 *   cs0 GPMC_CS_CONFIG6: 0x97080000
+		 */
 		gpmc,sync-read;
 		gpmc,sync-write;
 		gpmc,burst-length = <16>;
@@ -379,26 +392,27 @@
 		gpmc,device-width = <2>;
 		gpmc,mux-add-data = <2>;
 		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <87>;
-		gpmc,cs-wr-off-ns = <87>;
+		gpmc,cs-rd-off-ns = <122>;
+		gpmc,cs-wr-off-ns = <122>;
 		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <87>;
+		gpmc,adv-rd-off-ns = <15>;
+		gpmc,adv-wr-off-ns = <15>;
+		gpmc,oe-on-ns = <20>;
+		gpmc,oe-off-ns = <122>;
 		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <87>;
-		gpmc,rd-cycle-ns = <112>;
-		gpmc,wr-cycle-ns = <112>;
-		gpmc,access-ns = <81>;
+		gpmc,we-off-ns = <122>;
+		gpmc,rd-cycle-ns = <148>;
+		gpmc,wr-cycle-ns = <148>;
+		gpmc,access-ns = <117>;
 		gpmc,page-burst-access-ns = <15>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <81>;
-		gpmc,sync-clk-ps = <15000>;
+		gpmc,clk-activation-ns = <10>;
+		gpmc,wr-data-mux-bus-ns = <40>;
+		gpmc,wr-access-ns = <117>;
+
+		gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */
 
 		/*
 		 * MTD partition table corresponding to Nokia's MeeGo 1.2
-- 
2.19.1

[PATCH 4.20 072/171] ARM: dts: omap4-droid4: Fix typo in cpcap IRQ flags

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ef4a55b9197a8f844ea0663138e902dcce3e2f36 ]

We're now getting the following error:

genirq: Setting trigger mode 1 for irq 230 failed
(regmap_irq_set_type+0x0/0x15c)
cpcap-usb-phy cpcap-usb-phy.0: could not get irq dp: -524

Cc: Sebastian Reichel <sre@kernel.org>
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index ddc7a7bb33c0..f57acf8f66b9 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -105,7 +105,7 @@
 			interrupts-extended = <
 				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
 				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
-				&cpcap 48 1
+				&cpcap 48 0
 			>;
 			interrupt-names =
 				"id_ground", "id_float", "se0conn", "vbusvld",
-- 
2.19.1

[PATCH 4.20 073/171] ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit cc4bddade114b696ab27c1a77cfc7040151306da ]

Because "ethernet0" alias is missing, U-Boot doesn't generate board
specific MAC address. Effect of this is random MAC address every boot
and thus new IP address is assigned to the board.

Fix this by adding alias.

Fixes: 7389172fc3ed ("ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[Maxime: Removed unneeded comment]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 5d23667dc2d2..25540b7694d5 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -53,7 +53,7 @@
 
 	aliases {
 		serial0 = &uart0;
-		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
 		ethernet1 = &sdiowifi;
 	};
 
-- 
2.19.1

[PATCH 4.20 074/171] arm: dts: meson: Fix IRQ trigger type for macirq

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e35e26b26e955c53e61c154ba26b9bb15da6b858 ]

A long running stress test on a custom board shipping an AXG SoCs and a
Realtek RTL8211F PHY revealed that after a few hours the connection
speed would drop drastically, from ~1000Mbps to ~3Mbps. At the same time
the 'macirq' (eth0) IRQ would stop being triggered at all and as
consequence the GMAC IRQs never ACKed.

After a painful investigation the problem seemed to be due to a wrong
defined IRQ type for the GMAC IRQ that should be LEVEL_HIGH instead of
EDGE_RISING.

The change in the macirq IRQ type also solved another long standing
issue affecting this SoC/PHY where EEE was causing the network
connection to die after stressing it with iperf3 (even though much
sooner). It's now possible to remove the 'eee-broken-1000t' quirk as
well.

Fixes: 9c15795a4f96 ("ARM: dts: meson8b-odroidc1: ethernet support")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson.dtsi           | 2 +-
 arch/arm/boot/dts/meson8b-odroidc1.dts | 1 -
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 0d9faf1a51ea..a86b89086334 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -263,7 +263,7 @@
 			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
 			reg = <0xc9410000 0x10000
 			       0xc1108108 0x4>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 58669abda259..a951a6632d0c 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -221,7 +221,6 @@
 		/* Realtek RTL8211F (0x001cc916) */
 		eth_phy: ethernet-phy@0 {
 			reg = <0>;
-			eee-broken-1000t;
 			interrupt-parent = <&gpio_intc>;
 			/* GPIOH_3 */
 			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-- 
2.19.1

[PATCH 4.20 075/171] ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 3fb348e030319f20ebbde082a449d4bf8a96f2fd ]

After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.

The CD GPIO is "active low" on Odroid-C1. The MMC dt-bindings specify:
"[...] using the "cd-inverted" property means, that the CD line is active
high, i.e. it is high, when a card is inserted".

Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.

Fixes: e03efbce6bebf5 ("ARM: dts: meson8b-odroidc1: add microSD support")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a951a6632d0c..0f0a46ddf3ff 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -272,8 +272,7 @@
 		cap-sd-highspeed;
 		disable-wp;
 
-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-		cd-inverted;
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 		vmmc-supply = <&tflash_vdd>;
 		vqmmc-supply = <&tf_io>;
-- 
2.19.1

[PATCH 4.20 076/171] ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c8bfe65fb1fb7a43d766df1dfa379406112cba61 ]

After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.

The CD GPIO is "active low" on the EC-100. The MMC dt-bindings specify:
"[...] using the "cd-inverted" property means, that the CD line is active
high, i.e. it is high, when a card is inserted".

Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.

Fixes: bbedc1f1d90e33 ("ARM: dts: meson8b: Add support for the Endless Mini (EC-100)")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b-ec100.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 0872f6e3abf5..d50fc2f60fa3 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -205,8 +205,7 @@
 		cap-sd-highspeed;
 		disable-wp;
 
-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-		cd-inverted;
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 		vmmc-supply = <&vcc_3v3>;
 	};
-- 
2.19.1

[PATCH 4.20 077/171] ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8615f5596335db0978cea593dcd0070dc5f8b116 ]

After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") SD cards are not detected anymore.

The CD GPIO is "active low" on the MXIII-Plus. The MMC dt-bindings
specify: "[...] using the "cd-inverted" property means, that the CD line
is active high, i.e. it is high, when a card is inserted".

Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and
drop the "cd-inverted" property. This makes the definition consistent
with the existing dt-bindings and fixes the check whether an SD card is
inserted.

Fixes: 35ee52bea66c74 ("ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index f5853610b20b..6ac02beb5fa7 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -206,8 +206,7 @@
 		cap-sd-highspeed;
 		disable-wp;
 
-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-		cd-inverted;
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
 		vmmc-supply = <&vcc_3v3>;
 	};
-- 
2.19.1

[PATCH 4.20 078/171] signal: Make siginmask safe when passed a signal of 0

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ee17e5d6201c66492a0e8053190fca2ed2b8457d ]

Eric Biggers reported:
> The following commit, which went into v4.20, introduced undefined behavior when
> sys_rt_sigqueueinfo() is called with sig=0:
>
> commit 4ce5f9c9e7546915c559ffae594e6d73f918db00
> Author: Eric W. Biederman <ebiederm@xmission.com>
> Date:   Tue Sep 25 12:59:31 2018 +0200
>
>     signal: Use a smaller struct siginfo in the kernel
>
> In sig_specific_sicodes(), used from known_siginfo_layout(), the expression
> '1ULL << ((sig)-1)' is undefined as it evaluates to 1ULL << 4294967295.
>
> Reproducer:
>
> #include <signal.h>
> #include <sys/syscall.h>
> #include <unistd.h>
>
> int main(void)
> {
> 	siginfo_t si = { .si_code = 1 };
> 	syscall(__NR_rt_sigqueueinfo, 0, 0, &si);
> }
>
> UBSAN report for v5.0-rc1:
>
> UBSAN: Undefined behaviour in kernel/signal.c:2946:7
> shift exponent 4294967295 is too large for 64-bit type 'long unsigned int'
> CPU: 2 PID: 346 Comm: syz_signal Not tainted 5.0.0-rc1 #25
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> Call Trace:
>  __dump_stack lib/dump_stack.c:77 [inline]
>  dump_stack+0x70/0xa5 lib/dump_stack.c:113
>  ubsan_epilogue+0xd/0x40 lib/ubsan.c:159
>  __ubsan_handle_shift_out_of_bounds+0x12c/0x170 lib/ubsan.c:425
>  known_siginfo_layout+0xae/0xe0 kernel/signal.c:2946
>  post_copy_siginfo_from_user kernel/signal.c:3009 [inline]
>  __copy_siginfo_from_user+0x35/0x60 kernel/signal.c:3035
>  __do_sys_rt_sigqueueinfo kernel/signal.c:3553 [inline]
>  __se_sys_rt_sigqueueinfo kernel/signal.c:3549 [inline]
>  __x64_sys_rt_sigqueueinfo+0x31/0x70 kernel/signal.c:3549
>  do_syscall_64+0x4c/0x1b0 arch/x86/entry/common.c:290
>  entry_SYSCALL_64_after_hwframe+0x49/0xbe
> RIP: 0033:0x433639
> Code: c4 18 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b 27 00 00 c3 66 2e 0f 1f 84 00 00 00 00
> RSP: 002b:00007fffcb289fc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000081
> RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000433639
> RDX: 00007fffcb289fd0 RSI: 0000000000000000 RDI: 0000000000000000
> RBP: 00000000006b2018 R08: 000000000000004d R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401560
> R13: 00000000004015f0 R14: 0000000000000000 R15: 0000000000000000

I have looked at the other callers of siginmask and they all appear to
in locations where sig can not be zero.

I have looked at the code generation of adding an extra test against
zero and gcc was able with a simple decrement instruction to combine
the two tests together. So the at most adding this test cost a single
cpu cycle.  In practice that decrement instruction was already present
as part of the mask comparison, so the only change was when the
instruction was executed.

So given that it is cheap, and obviously correct to update siginmask
to verify the signal is not zero.  Fix this issue there to avoid any
future problems.

Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 4ce5f9c9e754 ("signal: Use a smaller struct siginfo in the kernel")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/signal.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/signal.h b/include/linux/signal.h
index f428e86f4800..b5d99482d3fe 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -388,7 +388,7 @@ extern bool unhandled_signal(struct task_struct *tsk, int sig);
 #endif
 
 #define siginmask(sig, mask) \
-	((sig) < SIGRTMIN && (rt_sigmask(sig) & (mask)))
+	((sig) > 0 && (sig) < SIGRTMIN && (rt_sigmask(sig) & (mask)))
 
 #define SIG_KERNEL_ONLY_MASK (\
 	rt_sigmask(SIGKILL)   |  rt_sigmask(SIGSTOP))
-- 
2.19.1

[PATCH 4.20 079/171] ARM: dts: imx6sx: correct backward compatible of gpt

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ba0f4560526ba19300c07ed5a3c1df7592815dc6 ]

i.MX6SX has same GPT type as i.MX6DL, in GPT driver, it uses
below TIMER_OF_DECLARE, so the backward compatible should be
"fsl,imx6dl-gpt", correct it.

TIMER_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt);

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6sx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 95a3c1cb877d..89ba48f4273b 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -462,7 +462,7 @@
 			};
 
 			gpt: gpt@2098000 {
-				compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
+				compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_GPT_BUS>,
-- 
2.19.1

[PATCH 4.20 080/171] arm64: dts: renesas: r8a7796: Enable DMA for SCIF2

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 97f26702bc95b5c3a72671d5c6675e4d6ee0a2f4 ]

SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2.

Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 1ec6aaa520c1..09320caea54e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1160,6 +1160,9 @@
 				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
-- 
2.19.1

[PATCH 4.20 081/171] arm64: dts: renesas: r8a77965: Enable DMA for SCIF2

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 05c8478abd485507c25aa565afab604af8d8fe46 ]

SCIF2 on R-Car M3-N can be used with both DMAC1 and DMAC2.

Fixes: 0ea5b2fd38db56aa ("arm64: dts: renesas: r8a77965: Add SCIF device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 83946ca2eba5..d59dada13722 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1028,6 +1028,9 @@
 				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
-- 
2.19.1

[PATCH 4.20 082/171] soc: fsl: qbman: avoid race in clearing QMan interrupt

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 89857a8a5c89a406b967ab2be7bd2ccdbe75e73d ]

By clearing all interrupt sources, not only those that
already occurred, the existing code may acknowledge by
mistake interrupts that occurred after the code checks
for them.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/fsl/qbman/qman.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c
index 5ce24718c2fd..d8b3ba047c28 100644
--- a/drivers/soc/fsl/qbman/qman.c
+++ b/drivers/soc/fsl/qbman/qman.c
@@ -1124,18 +1124,19 @@ static void qm_mr_process_task(struct work_struct *work);
 static irqreturn_t portal_isr(int irq, void *ptr)
 {
 	struct qman_portal *p = ptr;
-
-	u32 clear = QM_DQAVAIL_MASK | p->irq_sources;
 	u32 is = qm_in(&p->p, QM_REG_ISR) & p->irq_sources;
+	u32 clear = 0;
 
 	if (unlikely(!is))
 		return IRQ_NONE;
 
 	/* DQRR-handling if it's interrupt-driven */
-	if (is & QM_PIRQ_DQRI)
+	if (is & QM_PIRQ_DQRI) {
 		__poll_portal_fast(p, QMAN_POLL_LIMIT);
+		clear = QM_DQAVAIL_MASK | QM_PIRQ_DQRI;
+	}
 	/* Handling of anything else that's interrupt-driven */
-	clear |= __poll_portal_slow(p, is);
+	clear |= __poll_portal_slow(p, is) & QM_PIRQ_SLOW;
 	qm_out(&p->p, QM_REG_ISR, clear);
 	return IRQ_HANDLED;
 }
-- 
2.19.1

[PATCH 4.20 083/171] pinctrl: mcp23s08: spi: Fix regmap allocation for mcp23s18

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f165988b77ef849eb0c1aebd94fe778024f88314 ]

Fixes issue created by 9b3e4207661e67f04c72af15e29f74cd944f5964.

It wasn't possible for one_regmap_config to be non-NULL at the point
it was tested for mcp23s18 devices.

Applied the same pattern of allocating one_regmap_config using
devm_kmemdump() and then initializing the local regmap structure
from that.

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-mcp23s08.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index b03481ef99a1..98905d4a79ca 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -832,8 +832,13 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 		break;
 
 	case MCP_TYPE_S18:
+		one_regmap_config =
+			devm_kmemdup(dev, &mcp23x17_regmap,
+				sizeof(struct regmap_config), GFP_KERNEL);
+		if (!one_regmap_config)
+			return -ENOMEM;
 		mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp,
-					       &mcp23x17_regmap);
+					       one_regmap_config);
 		mcp->reg_shift = 1;
 		mcp->chip.ngpio = 16;
 		mcp->chip.label = "mcp23s18";
-- 
2.19.1

[PATCH 4.20 084/171] wlcore: sdio: Fixup power on/off sequence

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 13e62626c578d9889ebbda7c521be5adff9bef8e ]

During "wlan-up", we are programming the FW into the WiFi-chip. However,
re-programming the FW doesn't work, unless a power cycle of the WiFi-chip
is made in-between the programmings.

To conform to this requirement and to fix the regression in a simple way,
let's start by allowing that the SDIO card (WiFi-chip) may stay powered on
(runtime resumed) when wl12xx_sdio_power_off() returns. The intent with the
current code is to treat this scenario as an error, but unfortunate this
doesn't work as expected, so let's fix this.

The other part is to guarantee that a power cycle of the SDIO card has been
completed when wl12xx_sdio_power_on() returns, as to allow the FW
programming to succeed. However, relying solely on runtime PM to deal with
this isn't sufficient. For example, userspace may prevent runtime suspend
via sysfs for the device that represents the SDIO card, leading to that the
mmc core also keeps it powered on. For this reason, let's instead do a
brute force power cycle in wl12xx_sdio_power_on().

Fixes: 728a9dc61f13 ("wlcore: sdio: Fix flakey SDIO runtime PM handling")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wlcore/sdio.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index bd10165d7eec..4d4b07701149 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -164,6 +164,12 @@ static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
 	}
 
 	sdio_claim_host(func);
+	/*
+	 * To guarantee that the SDIO card is power cycled, as required to make
+	 * the FW programming to succeed, let's do a brute force HW reset.
+	 */
+	mmc_hw_reset(card->host);
+
 	sdio_enable_func(func);
 	sdio_release_host(func);
 
@@ -174,20 +180,13 @@ static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue)
 {
 	struct sdio_func *func = dev_to_sdio_func(glue->dev);
 	struct mmc_card *card = func->card;
-	int error;
 
 	sdio_claim_host(func);
 	sdio_disable_func(func);
 	sdio_release_host(func);
 
 	/* Let runtime PM know the card is powered off */
-	error = pm_runtime_put(&card->dev);
-	if (error < 0 && error != -EBUSY) {
-		dev_err(&card->dev, "%s failed: %i\n", __func__, error);
-
-		return error;
-	}
-
+	pm_runtime_put(&card->dev);
 	return 0;
 }
 
-- 
2.19.1

[PATCH 4.20 085/171] bpftool: Fix prog dump by tag

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 752bcf80f5549c9901b2e8bc77b2138de55b1026 ]

Lance reported an issue with bpftool not being able to
dump program if there are more programs loaded and you
want to dump any but the first program, like:

  # bpftool prog
  28: kprobe  name trace_req_start  tag 1dfc28ba8b3dd597  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 112B  jited 109B  memlock 4096B  map_ids 13
  29: kprobe  name trace_req_compl  tag 5b6a5ecc6030a683  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 928B  jited 575B  memlock 4096B  map_ids 13,14
  #  bpftool prog dum jited tag 1dfc28ba8b3dd597
   0:	push   %rbp
   1:	mov    %rsp,%rbp
  ...

  #  bpftool prog dum jited tag 5b6a5ecc6030a683
  Error: can't get prog info (29): Bad address

The problem is in the prog_fd_by_tag function not cleaning
the struct bpf_prog_info before another request, so the
previous program length is still in there and kernel assumes
it needs to dump the program, which fails because there's no
user pointer set.

Moving the struct bpf_prog_info declaration into the loop,
so it gets cleaned before each query.

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/prog.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 69b01a6158bd..91b9de5f4e17 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -130,13 +130,14 @@ static void print_boot_time(__u64 nsecs, char *buf, unsigned int size)
 
 static int prog_fd_by_tag(unsigned char *tag)
 {
-	struct bpf_prog_info info = {};
-	__u32 len = sizeof(info);
 	unsigned int id = 0;
 	int err;
 	int fd;
 
 	while (true) {
+		struct bpf_prog_info info = {};
+		__u32 len = sizeof(info);
+
 		err = bpf_prog_get_next_id(id, &id);
 		if (err) {
 			p_err("%s", strerror(errno));
-- 
2.19.1

[PATCH 4.20 086/171] bpftool: fix percpu maps updating

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b0ca5ecb8e2279d706261f525f1bd0ba9e3fe800 ]

When updating a percpu map, bpftool currently copies the provided
value only into the first per CPU copy of the specified value,
all others instances are left zeroed.

This change explicitly copies the user-provided bytes to all the
per CPU instances, keeping the sub-command syntax unchanged.

v2 -> v3:
 - drop unused argument, as per Quentin's suggestion
v1 -> v2:
 - rename the helper as per Quentin's suggestion

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/map.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c
index 9988d5c126b6..94094168c4a6 100644
--- a/tools/bpf/bpftool/map.c
+++ b/tools/bpf/bpftool/map.c
@@ -439,6 +439,20 @@ static char **parse_bytes(char **argv, const char *name, unsigned char *val,
 	return argv + i;
 }
 
+/* on per cpu maps we must copy the provided value on all value instances */
+static void fill_per_cpu_value(struct bpf_map_info *info, void *value)
+{
+	unsigned int i, n, step;
+
+	if (!map_is_per_cpu(info->type))
+		return;
+
+	n = get_possible_cpus();
+	step = round_up(info->value_size, 8);
+	for (i = 1; i < n; i++)
+		memcpy(value + i * step, value, info->value_size);
+}
+
 static int parse_elem(char **argv, struct bpf_map_info *info,
 		      void *key, void *value, __u32 key_size, __u32 value_size,
 		      __u32 *flags, __u32 **value_fd)
@@ -518,6 +532,8 @@ static int parse_elem(char **argv, struct bpf_map_info *info,
 			argv = parse_bytes(argv, "value", value, value_size);
 			if (!argv)
 				return -1;
+
+			fill_per_cpu_value(info, value);
 		}
 
 		return parse_elem(argv, info, key, NULL, key_size, value_size,
-- 
2.19.1

[PATCH 4.20 087/171] bpf: sock recvbuff must be limited by rmem_max in bpf_setsockopt()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c9e4576743eeda8d24dedc164d65b78877f9a98c ]

When sock recvbuff is set by bpf_setsockopt(), the value must by
limited by rmem_max. It is the same with sendbuff.

Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/core/filter.c b/net/core/filter.c
index 16350f8c8815..821050957aca 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3927,10 +3927,12 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 		/* Only some socketops are supported */
 		switch (optname) {
 		case SO_RCVBUF:
+			val = min_t(u32, val, sysctl_rmem_max);
 			sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
 			sk->sk_rcvbuf = max_t(int, val * 2, SOCK_MIN_RCVBUF);
 			break;
 		case SO_SNDBUF:
+			val = min_t(u32, val, sysctl_wmem_max);
 			sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
 			sk->sk_sndbuf = max_t(int, val * 2, SOCK_MIN_SNDBUF);
 			break;
-- 
2.19.1

[PATCH 4.20 088/171] ARM: pxa: ssp: unneeded to free devm_ allocated data

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ba16adeb346387eb2d1ada69003588be96f098fa ]

devm_ allocated data will be automatically freed. The free
of devm_ allocated data is invalid.

Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[title's prefix changed]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/plat-pxa/ssp.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ed36dcab80f1..f51919974183 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -190,8 +190,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	if (ssp == NULL)
 		return -ENODEV;
 
-	iounmap(ssp->mmio_base);
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
@@ -201,7 +199,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	list_del(&ssp->node);
 	mutex_unlock(&ssp_lock);
 
-	kfree(ssp);
 	return 0;
 }
 
-- 
2.19.1

[PATCH 4.20 089/171] ARM: dts: omap3-gta04: Fix graph_port warning

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 5b90df44fd9b415d8c5d11b92746212a63d3c47f ]

We're currently getting a warning with make dtbs:

arch/arm/boot/dts/omap3-gta04.dtsi:720.7-727.4: Warning (graph_port):
/ocp@68000000/dss@48050000/encoder@48050c0 0/port: graph node unit
address error, expected "0"

Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index d5fe55392230..68e675258906 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -714,11 +714,7 @@
 
 	vdda-supply = <&vdac>;
 
-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port {
-		reg = <0>;
 		venc_out: endpoint {
 			remote-endpoint = <&opa_in>;
 			ti,channels = <1>;
-- 
2.19.1

[PATCH 4.20 090/171] ARM: dts: n900: fix mmc1 card detect gpio polarity

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ac9c908eecde3ed252cb1d67fc79b3c1346f76bc ]

Wrong polarity of card detect GPIO pin leads to the system not
booting from external mmc, if the back cover of N900 is closed.
When the cover is open the system boots fine.

This wasn't noticed before, because of a bug, which was fixed
by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO
CD and WP).

Kernels up to 4.19 ignored the card detect GPIO from DT.

Fixes: e63201f19438 ("mmc: omap_hsmmc: Delete platform data GPIO CD and WP")
Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-n900.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 182a53991c90..826920e6b878 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -814,7 +814,7 @@
 	/* For debugging, it is often good idea to remove this GPIO.
 	   It means you can remove back cover (to reboot by removing
 	   battery) and still use the MMC card. */
-	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
+	cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
 };
 
 /* most boards use vaux3, only some old versions use vmmc2 instead */
-- 
2.19.1

[PATCH 4.20 091/171] ARM: dts: am335x-shc.dts: fix wrong cd pin level

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 063c20e12f8bbbc10cabc2413606b140085beb62 ]

cd pin on mmc1 is GPIO_ACTIVE_LOW not GPIO_ACTIVE_HIGH

Fixes: e63201f19438 ("mmc: omap_hsmmc: Delete platform data GPIO CD and WP")
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-shc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 1d925ed2b102..8fbbad11a80c 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -215,7 +215,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	bus-width = <0x4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 	cd-inverted;
 	max-frequency = <26000000>;
 	vmmc-supply = <&vmmcsd_fixed>;
-- 
2.19.1

[PATCH 4.20 092/171] arm64: dts: add msm8996 compatible to gicv3

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2a81efb0de0e33f2d2c83154af0bd3ce389b3269 ]

Add compatible to gicv3 node to enable quirk required to restrict writing
to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.

With this quirk MSM8996 can at least boot out of mainline, which can help
community to work with boards based on MSM8996.

Without this patch Qualcomm DB820c board reboots on mainline.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b29fe80d7288..461612a5ab5e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -397,7 +397,7 @@
 		};
 
 		intc: interrupt-controller@9bc0000 {
-			compatible = "arm,gic-v3";
+			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
-- 
2.19.1

[PATCH 4.20 093/171] batman-adv: release station info tidstats

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7d652669b61d702c6e62a39579d17f6881670ab6 ]

With the addition of TXQ stats in the per-tid statistics the struct
station_info grew significantly. This resulted in stack size warnings
due to the structure itself being above the limit for the warnings.

To work around this, the TID array was allocated dynamically. Also a
function to free this content was introduced with commit 7ea3e110f2f8
("cfg80211: release station info tidstats where needed") but the necessary
changes were not provided for batman-adv's B.A.T.M.A.N. V implementation.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
[sven@narfation.org: add commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_v_elp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index e8090f099eb8..ef0dec20c7d8 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -104,6 +104,9 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 
 		ret = cfg80211_get_station(real_netdev, neigh->addr, &sinfo);
 
+		/* free the TID stats immediately */
+		cfg80211_sinfo_release_content(&sinfo);
+
 		dev_put(real_netdev);
 		if (ret == -ENOENT) {
 			/* Node is not associated anymore! It would be
-- 
2.19.1

[PATCH 4.20 094/171] MIPS: DTS: jz4740: Correct interrupt number of DMA core

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 70999ec1c9d3f783a7232973cfc26971e5732758 ]

The interrupt number set in the devicetree node of the DMA driver was
wrong.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 6fb16fd24035..2beb78a62b7d 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -161,7 +161,7 @@
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;
-		interrupts = <29>;
+		interrupts = <20>;
 
 		clocks = <&cgu JZ4740_CLK_DMA>;
 
-- 
2.19.1

[PATCH 4.20 095/171] DTS: CI20: Fix bugs in ci20s device tree.

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1ca1c87f91d9dc50d6a38e2177b2032996e7901c ]

According to the Schematic, the hardware of ci20 leads to uart3,
but not to uart2. Uart2 is miswritten in the original code.

Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips <linux-mips@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Cc: devicetree@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: mark.rutland@arm.com
Cc: malat@debian.org
Cc: ezequiel@collabora.co.uk
Cc: ulf.hansson@linaro.org
Cc: syq <syq@debian.org>
Cc: jiaxun.yang <jiaxun.yang@flygoat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 50cff3cbcc6d..4f7b1fa31cf5 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -76,7 +76,7 @@
 	status = "okay";
 
 	pinctrl-names = "default";
-	pinctrl-0 = <&pins_uart2>;
+	pinctrl-0 = <&pins_uart3>;
 };
 
 &uart4 {
@@ -196,9 +196,9 @@
 		bias-disable;
 	};
 
-	pins_uart2: uart2 {
-		function = "uart2";
-		groups = "uart2-data", "uart2-hwflow";
+	pins_uart3: uart3 {
+		function = "uart3";
+		groups = "uart3-data", "uart3-hwflow";
 		bias-disable;
 	};
 
-- 
2.19.1

[PATCH 4.20 096/171] usb: phy: fix link errors

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f2105d42597f4d10e431b195d69e96dccaf9b012 ]

Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is
set to module then the following link error occurs.

aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl':
drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp':
drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host':
drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp':
drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum':
drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral':
drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
make[1]: *** [Makefile:1020: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:152: sub-make] Error 2
make: Target 'Image' not remade because of errors.

Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/phy/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index d7312eed6088..91ea3083e7ad 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -21,7 +21,7 @@ config AB8500_USB
 
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM=y && PM
 	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
-- 
2.19.1

[PATCH 4.20 097/171] usb: dwc3: exynos: Fix error handling of clk_prepare_enable

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 512e6fb589bc18f9321457632e89b95017447db9 ]

If clk_prepare_enable() fails in dwc3_exynos_probe() or in
dwc3_exynos_resume(), exynos->clks[0] is left undisabled
because of usage preincrement in while condition.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 9f2168367a0a ("usb: dwc3: exynos: Rework clock handling and prepare for new variants")
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/dwc3-exynos.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index cb7fcd7c0ad8..c1e9ea621f41 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -78,7 +78,7 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 	for (i = 0; i < exynos->num_clks; i++) {
 		ret = clk_prepare_enable(exynos->clks[i]);
 		if (ret) {
-			while (--i > 0)
+			while (i-- > 0)
 				clk_disable_unprepare(exynos->clks[i]);
 			return ret;
 		}
@@ -223,7 +223,7 @@ static int dwc3_exynos_resume(struct device *dev)
 	for (i = 0; i < exynos->num_clks; i++) {
 		ret = clk_prepare_enable(exynos->clks[i]);
 		if (ret) {
-			while (--i > 0)
+			while (i-- > 0)
 				clk_disable_unprepare(exynos->clks[i]);
 			return ret;
 		}
-- 
2.19.1

[PATCH 4.20 098/171] irqchip/gic-v4: Fix occasional VLPI drop

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6479450f72c1391c03f08affe0d0110f41ae7ca0 ]

1. In current implementation, every VLPI will temporarily be mapped to
the first CPU in system (normally CPU0) and then moved to the real
scheduled CPU later.

2. So there is a time window and a VLPI may be sent to CPU0 instead of
the real scheduled vCPU, in a multi-CPU virtual machine.

3. However, CPU0 may have not been scheduled as a virtual CPU after
system boots up, so the value of its GICR_VPROPBASER is unknown at
that moment.

4. If the INTID of VLPI is larger than 2^(GICR_VPROPBASER.IDbits+1),
while IDbits is also in unknown state, GIC will behave as if the VLPI
is out of range and simply drop it, which results in interrupt missing
in Guest.

As no code will clear GICR_VPROPBASER at runtime, we can safely
initialize the IDbits field at boot time for each CPU to get rid of
this issue.

We also clear Valid bit of GICR_VPENDBASER in case any ancient
programming gets left in and causes memory corrupting. A new function
its_clear_vpend_valid() is added to reuse the code in
its_vpe_deschedule().

Fixes: e643d8034036 ("irqchip/gic-v3-its: Add VPE scheduling")
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 66 ++++++++++++++++++++++++--------
 1 file changed, 49 insertions(+), 17 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 350f999d205b..f25ec92f23ee 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2065,6 +2065,29 @@ static int __init allocate_lpi_tables(void)
 	return 0;
 }
 
+static u64 its_clear_vpend_valid(void __iomem *vlpi_base)
+{
+	u32 count = 1000000;	/* 1s! */
+	bool clean;
+	u64 val;
+
+	val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
+	val &= ~GICR_VPENDBASER_Valid;
+	gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+	do {
+		val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
+		clean = !(val & GICR_VPENDBASER_Dirty);
+		if (!clean) {
+			count--;
+			cpu_relax();
+			udelay(1);
+		}
+	} while (!clean && count);
+
+	return val;
+}
+
 static void its_cpu_init_lpis(void)
 {
 	void __iomem *rbase = gic_data_rdist_rd_base();
@@ -2150,6 +2173,30 @@ static void its_cpu_init_lpis(void)
 	val |= GICR_CTLR_ENABLE_LPIS;
 	writel_relaxed(val, rbase + GICR_CTLR);
 
+	if (gic_rdists->has_vlpis) {
+		void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
+
+		/*
+		 * It's possible for CPU to receive VLPIs before it is
+		 * sheduled as a vPE, especially for the first CPU, and the
+		 * VLPI with INTID larger than 2^(IDbits+1) will be considered
+		 * as out of range and dropped by GIC.
+		 * So we initialize IDbits to known value to avoid VLPI drop.
+		 */
+		val = (LPI_NRBITS - 1) & GICR_VPROPBASER_IDBITS_MASK;
+		pr_debug("GICv4: CPU%d: Init IDbits to 0x%llx for GICR_VPROPBASER\n",
+			smp_processor_id(), val);
+		gits_write_vpropbaser(val, vlpi_base + GICR_VPROPBASER);
+
+		/*
+		 * Also clear Valid bit of GICR_VPENDBASER, in case some
+		 * ancient programming gets left in and has possibility of
+		 * corrupting memory.
+		 */
+		val = its_clear_vpend_valid(vlpi_base);
+		WARN_ON(val & GICR_VPENDBASER_Dirty);
+	}
+
 	/* Make sure the GIC has seen the above */
 	dsb(sy);
 out:
@@ -2776,26 +2823,11 @@ static void its_vpe_schedule(struct its_vpe *vpe)
 static void its_vpe_deschedule(struct its_vpe *vpe)
 {
 	void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
-	u32 count = 1000000;	/* 1s! */
-	bool clean;
 	u64 val;
 
-	/* We're being scheduled out */
-	val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
-	val &= ~GICR_VPENDBASER_Valid;
-	gits_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
-
-	do {
-		val = gits_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
-		clean = !(val & GICR_VPENDBASER_Dirty);
-		if (!clean) {
-			count--;
-			cpu_relax();
-			udelay(1);
-		}
-	} while (!clean && count);
+	val = its_clear_vpend_valid(vlpi_base);
 
-	if (unlikely(!clean && !count)) {
+	if (unlikely(val & GICR_VPENDBASER_Dirty)) {
 		pr_err_ratelimited("ITS virtual pending table not cleaning\n");
 		vpe->idai = false;
 		vpe->pending_last = true;
-- 
2.19.1

[PATCH 4.20 099/171] irqchip/gic-v3-its: Gracefully fail on LPI exhaustion

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 45725e0fc3e7fe52fedb94f59806ec50e9618682 ]

In the unlikely event that we cannot find any available LPI in the
system, we should gracefully return an error instead of carrying
on with no LPI allocated at all.

Fixes: 38dd7c494cf6 ("irqchip/gic-v3-its: Drop chunk allocation compatibility")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index f25ec92f23ee..c3aba3fc818d 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -1586,6 +1586,9 @@ static unsigned long *its_lpi_alloc(int nr_irqs, u32 *base, int *nr_ids)
 		nr_irqs /= 2;
 	} while (nr_irqs > 0);
 
+	if (!nr_irqs)
+		err = -ENOSPC;
+
 	if (err)
 		goto out;
 
-- 
2.19.1

[PATCH 4.20 100/171] irqchip/mmp: Only touch the PJ4 IRQ & FIQ bits on enable/disable

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2380a22b60ce6f995eac806e69c66e397b59d045 ]

Resetting bit 4 disables the interrupt delivery to the "secure
processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop,
where the firmware running on the "secure processor" bit-bangs the
PS/2 protocol over the GPIO lines.

It is not clear what the rest of the bits are and Marvell was unhelpful
when asked for documentation. Aside from the SP bit, there are probably
priority bits.

Leaving the unknown bits as the firmware set them up seems to be a wiser
course of action compared to just turning them off.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
[maz: fixed-up subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-mmp.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
index 25f32e1d7764..3496b61a312a 100644
--- a/drivers/irqchip/irq-mmp.c
+++ b/drivers/irqchip/irq-mmp.c
@@ -34,6 +34,9 @@
 #define SEL_INT_PENDING		(1 << 6)
 #define SEL_INT_NUM_MASK	0x3f
 
+#define MMP2_ICU_INT_ROUTE_PJ4_IRQ	(1 << 5)
+#define MMP2_ICU_INT_ROUTE_PJ4_FIQ	(1 << 6)
+
 struct icu_chip_data {
 	int			nr_irqs;
 	unsigned int		virq_base;
@@ -190,7 +193,8 @@ static const struct mmp_intc_conf mmp_conf = {
 static const struct mmp_intc_conf mmp2_conf = {
 	.conf_enable	= 0x20,
 	.conf_disable	= 0x0,
-	.conf_mask	= 0x7f,
+	.conf_mask	= MMP2_ICU_INT_ROUTE_PJ4_IRQ |
+			  MMP2_ICU_INT_ROUTE_PJ4_FIQ,
 };
 
 static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)
-- 
2.19.1

[PATCH 4.20 101/171] drm/amdgpu: Add missing power attribute to APU check

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit dc14eb12f6bb3e779c5461429c1889a339c67aab ]

Add missing power_average to visible check for power
attributes for APUs.  Was missed before.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index 59cc678de8c1..bbac15fd8caa 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -1671,7 +1671,8 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj,
 		effective_mode &= ~S_IWUSR;
 
 	if ((adev->flags & AMD_IS_APU) &&
-	    (attr == &sensor_dev_attr_power1_cap_max.dev_attr.attr ||
+	    (attr == &sensor_dev_attr_power1_average.dev_attr.attr ||
+	     attr == &sensor_dev_attr_power1_cap_max.dev_attr.attr ||
 	     attr == &sensor_dev_attr_power1_cap_min.dev_attr.attr||
 	     attr == &sensor_dev_attr_power1_cap.dev_attr.attr))
 		return 0;
-- 
2.19.1

[PATCH 4.20 102/171] drm/radeon: check if device is root before getting pci speed caps

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit afeff4c16edaa6275b903f82b0561406259aa3a3 ]

Check if the device is root rather before attempting to see what
speeds the pcie port supports.  Fixes a crash with pci passthrough
in a VM.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109366
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/ci_dpm.c | 5 +++--
 drivers/gpu/drm/radeon/si_dpm.c | 5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c
index d587779a80b4..a97294ac96d5 100644
--- a/drivers/gpu/drm/radeon/ci_dpm.c
+++ b/drivers/gpu/drm/radeon/ci_dpm.c
@@ -5676,7 +5676,7 @@ int ci_dpm_init(struct radeon_device *rdev)
 	u16 data_offset, size;
 	u8 frev, crev;
 	struct ci_power_info *pi;
-	enum pci_bus_speed speed_cap;
+	enum pci_bus_speed speed_cap = PCI_SPEED_UNKNOWN;
 	struct pci_dev *root = rdev->pdev->bus->self;
 	int ret;
 
@@ -5685,7 +5685,8 @@ int ci_dpm_init(struct radeon_device *rdev)
 		return -ENOMEM;
 	rdev->pm.dpm.priv = pi;
 
-	speed_cap = pcie_get_speed_cap(root);
+	if (!pci_is_root_bus(rdev->pdev->bus))
+		speed_cap = pcie_get_speed_cap(root);
 	if (speed_cap == PCI_SPEED_UNKNOWN) {
 		pi->sys_pcie_mask = 0;
 	} else {
diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index 8fb60b3af015..0a785ef0ab66 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -6899,7 +6899,7 @@ int si_dpm_init(struct radeon_device *rdev)
 	struct ni_power_info *ni_pi;
 	struct si_power_info *si_pi;
 	struct atom_clock_dividers dividers;
-	enum pci_bus_speed speed_cap;
+	enum pci_bus_speed speed_cap = PCI_SPEED_UNKNOWN;
 	struct pci_dev *root = rdev->pdev->bus->self;
 	int ret;
 
@@ -6911,7 +6911,8 @@ int si_dpm_init(struct radeon_device *rdev)
 	eg_pi = &ni_pi->eg;
 	pi = &eg_pi->rv7xx;
 
-	speed_cap = pcie_get_speed_cap(root);
+	if (!pci_is_root_bus(rdev->pdev->bus))
+		speed_cap = pcie_get_speed_cap(root);
 	if (speed_cap == PCI_SPEED_UNKNOWN) {
 		si_pi->sys_pcie_mask = 0;
 	} else {
-- 
2.19.1

[PATCH 4.20 103/171] drm/amdgpu: Transfer fences to dmabuf importer

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6e11ea9de9576a644045ffdc2067c09bc2012eda ]

amdgpu only uses shared-fences internally, but dmabuf importers rely on
implicit write hazard tracking via the reservation_object.fence_excl.
For example, the importer use the write hazard for timing a page flip to
only occur after the exporter has finished flushing its write into the
surface. As such, on exporting a dmabuf, we must either flush all
outstanding fences (for we do not know which are writes and should have
been exclusive) or alternatively create a new exclusive fence that is
the composite of all the existing shared fences, and so will only be
signaled when all earlier fences are signaled (ensuring that we can not
be signaled before the completion of any earlier write).

v2: reservation_object is already locked by amdgpu_bo_reserve()
v3: Replace looping with get_fences_rcu and special case the promotion
of a single shared fence directly to an exclusive fence, bypassing the
fence array.
v4: Drop the fence array ref after assigning to reservation_object

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107341
Testcase: igt/amd_prime/amd-to-i915
References: 8e94a46c1770 ("drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Reviewed-by: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c | 59 ++++++++++++++++++++---
 1 file changed, 51 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c
index e45e929aaab5..90a5970af4b7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c
@@ -38,6 +38,7 @@
 #include "amdgpu_gem.h"
 #include <drm/amdgpu_drm.h>
 #include <linux/dma-buf.h>
+#include <linux/dma-fence-array.h>
 
 static const struct dma_buf_ops amdgpu_dmabuf_ops;
 
@@ -189,6 +190,48 @@ amdgpu_gem_prime_import_sg_table(struct drm_device *dev,
 	return ERR_PTR(ret);
 }
 
+static int
+__reservation_object_make_exclusive(struct reservation_object *obj)
+{
+	struct dma_fence **fences;
+	unsigned int count;
+	int r;
+
+	if (!reservation_object_get_list(obj)) /* no shared fences to convert */
+		return 0;
+
+	r = reservation_object_get_fences_rcu(obj, NULL, &count, &fences);
+	if (r)
+		return r;
+
+	if (count == 0) {
+		/* Now that was unexpected. */
+	} else if (count == 1) {
+		reservation_object_add_excl_fence(obj, fences[0]);
+		dma_fence_put(fences[0]);
+		kfree(fences);
+	} else {
+		struct dma_fence_array *array;
+
+		array = dma_fence_array_create(count, fences,
+					       dma_fence_context_alloc(1), 0,
+					       false);
+		if (!array)
+			goto err_fences_put;
+
+		reservation_object_add_excl_fence(obj, &array->base);
+		dma_fence_put(&array->base);
+	}
+
+	return 0;
+
+err_fences_put:
+	while (count--)
+		dma_fence_put(fences[count]);
+	kfree(fences);
+	return -ENOMEM;
+}
+
 /**
  * amdgpu_gem_map_attach - &dma_buf_ops.attach implementation
  * @dma_buf: Shared DMA buffer
@@ -220,16 +263,16 @@ static int amdgpu_gem_map_attach(struct dma_buf *dma_buf,
 
 	if (attach->dev->driver != adev->dev->driver) {
 		/*
-		 * Wait for all shared fences to complete before we switch to future
-		 * use of exclusive fence on this prime shared bo.
+		 * We only create shared fences for internal use, but importers
+		 * of the dmabuf rely on exclusive fences for implicitly
+		 * tracking write hazards. As any of the current fences may
+		 * correspond to a write, we need to convert all existing
+		 * fences on the reservation object into a single exclusive
+		 * fence.
 		 */
-		r = reservation_object_wait_timeout_rcu(bo->tbo.resv,
-							true, false,
-							MAX_SCHEDULE_TIMEOUT);
-		if (unlikely(r < 0)) {
-			DRM_DEBUG_PRIME("Fence wait failed: %li\n", r);
+		r = __reservation_object_make_exclusive(bo->tbo.resv);
+		if (r)
 			goto error_unreserve;
-		}
 	}
 
 	/* pin buffer into GTT */
-- 
2.19.1

[PATCH 4.20 104/171] net: stmmac: Fallback to Platform Data clock in Watchdog conversion

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4ec5302fa906ec9d86597b236f62315bacdb9622 ]

If we don't have DT then stmmac_clk will not be available. Let's add a
new Platform Data field so that we can specify the refclk by this mean.

This way we can still use the coalesce command in PCI based setups.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   | 14 ++++++++++----
 include/linux/stmmac.h                             |  1 +
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 9caf79ba5ef1..4d5fb4b51cc4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -719,8 +719,11 @@ static u32 stmmac_usec2riwt(u32 usec, struct stmmac_priv *priv)
 {
 	unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
 
-	if (!clk)
-		return 0;
+	if (!clk) {
+		clk = priv->plat->clk_ref_rate;
+		if (!clk)
+			return 0;
+	}
 
 	return (usec * (clk / 1000000)) / 256;
 }
@@ -729,8 +732,11 @@ static u32 stmmac_riwt2usec(u32 riwt, struct stmmac_priv *priv)
 {
 	unsigned long clk = clk_get_rate(priv->plat->stmmac_clk);
 
-	if (!clk)
-		return 0;
+	if (!clk) {
+		clk = priv->plat->clk_ref_rate;
+		if (!clk)
+			return 0;
+	}
 
 	return (riwt * 256) / (clk / 1000000);
 }
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 7ddfc65586b0..4335bd771ce5 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -184,6 +184,7 @@ struct plat_stmmacenet_data {
 	struct clk *pclk;
 	struct clk *clk_ptp_ref;
 	unsigned int clk_ptp_rate;
+	unsigned int clk_ref_rate;
 	struct reset_control *stmmac_rst;
 	struct stmmac_axi *axi;
 	int has_gmac4;
-- 
2.19.1

[PATCH 4.20 105/171] net: stmmac: Send TSO packets always from Queue 0

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c5acdbee22a1b200dde07effd26fd1f649e9ab8a ]

The number of TSO enabled channels in HW can be different than the
number of total channels. There is no way to determined, at runtime, the
number of TSO capable channels and its safe to assume that if TSO is
enabled then at least channel 0 will be TSO capable.

Lets always send TSO packets from Queue 0.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 5d83d6a7694b..f76f6ae3fa87 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3033,8 +3033,17 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Manage oversized TCP frames for GMAC4 device */
 	if (skb_is_gso(skb) && priv->tso) {
-		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))
+		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
+			/*
+			 * There is no way to determine the number of TSO
+			 * capable Queues. Let's use always the Queue 0
+			 * because if TSO is supported then at least this
+			 * one will be capable.
+			 */
+			skb_set_queue_mapping(skb, 0);
+
 			return stmmac_tso_xmit(skb, dev);
+		}
 	}
 
 	if (unlikely(stmmac_tx_avail(priv, queue) < nfrags + 1)) {
-- 
2.19.1

[PATCH 4.20 106/171] net: stmmac: Disable EEE mode earlier in XMIT callback

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e2cd682deb231ba6f80524bb84e57e7138261149 ]

In stmmac xmit callback we use a different flow for TSO packets but TSO
xmit callback is not disabling the EEE mode.

Fix this by disabling earlier the EEE mode, i.e. before calling the TSO
xmit callback.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index f76f6ae3fa87..9340526d2a9a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3031,6 +3031,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tx_q = &priv->tx_queue[queue];
 
+	if (priv->tx_path_in_lpi_mode)
+		stmmac_disable_eee_mode(priv);
+
 	/* Manage oversized TCP frames for GMAC4 device */
 	if (skb_is_gso(skb) && priv->tso) {
 		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
@@ -3058,9 +3061,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_BUSY;
 	}
 
-	if (priv->tx_path_in_lpi_mode)
-		stmmac_disable_eee_mode(priv);
-
 	entry = tx_q->cur_tx;
 	first_entry = entry;
 	WARN_ON(tx_q->tx_skbuff[first_entry]);
-- 
2.19.1

[PATCH 4.20 107/171] irqchip/gic-v3-its: Fix ITT_entry_size accessor

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 56841070ccc87b463ac037d2d1f2beb8e5e35f0c ]

According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's
bits [7:4] as ITT_entry_size instead of [8:4]. Although this is
pretty annoying, it only results in a potential over-allocation
of memory, and nothing bad happens.

Fixes: 3dfa576bfb45 ("irqchip/gic-v3-its: Add probing for VLPI properties")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: massaged subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/irqchip/arm-gic-v3.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index 071b4cbdf010..c848a7cc502e 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -319,7 +319,7 @@
 #define GITS_TYPER_PLPIS		(1UL << 0)
 #define GITS_TYPER_VLPIS		(1UL << 1)
 #define GITS_TYPER_ITT_ENTRY_SIZE_SHIFT	4
-#define GITS_TYPER_ITT_ENTRY_SIZE(r)	((((r) >> GITS_TYPER_ITT_ENTRY_SIZE_SHIFT) & 0x1f) + 1)
+#define GITS_TYPER_ITT_ENTRY_SIZE(r)	((((r) >> GITS_TYPER_ITT_ENTRY_SIZE_SHIFT) & 0xf) + 1)
 #define GITS_TYPER_IDBITS_SHIFT		8
 #define GITS_TYPER_DEVBITS_SHIFT	13
 #define GITS_TYPER_DEVBITS(r)		((((r) >> GITS_TYPER_DEVBITS_SHIFT) & 0x1f) + 1)
-- 
2.19.1

[PATCH 4.20 108/171] relay: check return of create_buf_file() properly

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2c1cf00eeacb784781cf1c9896b8af001246d339 ]

If create_buf_file() returns an error, don't try to reference it later
as a valid dentry pointer.

This problem was exposed when debugfs started to return errors instead
of just NULL for some calls when they do not succeed properly.

Also, the check for WARN_ON(dentry) was just wrong :)

Reported-by: Kees Cook <keescook@chromium.org>
Reported-and-tested-by: syzbot+16c3a70e1e9b29346c43@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/relay.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/relay.c b/kernel/relay.c
index 04f248644e06..9e0f52375487 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -428,6 +428,8 @@ static struct dentry *relay_create_buf_file(struct rchan *chan,
 	dentry = chan->cb->create_buf_file(tmpname, chan->parent,
 					   S_IRUSR, buf,
 					   &chan->is_global);
+	if (IS_ERR(dentry))
+		dentry = NULL;
 
 	kfree(tmpname);
 
@@ -461,7 +463,7 @@ static struct rchan_buf *relay_open_buf(struct rchan *chan, unsigned int cpu)
 		dentry = chan->cb->create_buf_file(NULL, NULL,
 						   S_IRUSR, buf,
 						   &chan->is_global);
-		if (WARN_ON(dentry))
+		if (IS_ERR_OR_NULL(dentry))
 			goto free_buf;
 	}
 
-- 
2.19.1

[PATCH 4.20 109/171] ath10k: correct bus type for WCN3990

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2c2008a63e482654ab137c84d3c61c03b75e7df6 ]

WCN3990 is SNOC, not PCI. This prevents probing WCN3990.

Fixes: 367c899f622c ("ath10k: add bus type check in ath10k_init_hw_params")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 59fdda67f89f..0a3b2c45549e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -548,7 +548,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
 		.dev_id = 0,
-		.bus = ATH10K_BUS_PCI,
+		.bus = ATH10K_BUS_SNOC,
 		.name = "wcn3990 hw1.0",
 		.continuous_frag_desc = true,
 		.tx_chain_mask = 0x7,
-- 
2.19.1

[PATCH 4.20 110/171] bpf, selftests: fix handling of sparse CPU allocations

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1bb54c4071f585ebef56ce8fdfe6026fa2cbcddd ]

Previously, bpf_num_possible_cpus() had a bug when calculating a
number of possible CPUs in the case of sparse CPU allocations, as
it was considering only the first range or element of
/sys/devices/system/cpu/possible.

E.g. in the case of "0,2-3" (CPU 1 is not available), the function
returned 1 instead of 3.

This patch fixes the function by making it parse all CPU ranges and
elements.

Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/bpf_util.h | 30 +++++++++++++++++---------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/tools/testing/selftests/bpf/bpf_util.h b/tools/testing/selftests/bpf/bpf_util.h
index 315a44fa32af..84fd6f1bf33e 100644
--- a/tools/testing/selftests/bpf/bpf_util.h
+++ b/tools/testing/selftests/bpf/bpf_util.h
@@ -13,7 +13,7 @@ static inline unsigned int bpf_num_possible_cpus(void)
 	unsigned int start, end, possible_cpus = 0;
 	char buff[128];
 	FILE *fp;
-	int n;
+	int len, n, i, j = 0;
 
 	fp = fopen(fcpu, "r");
 	if (!fp) {
@@ -21,17 +21,27 @@ static inline unsigned int bpf_num_possible_cpus(void)
 		exit(1);
 	}
 
-	while (fgets(buff, sizeof(buff), fp)) {
-		n = sscanf(buff, "%u-%u", &start, &end);
-		if (n == 0) {
-			printf("Failed to retrieve # possible CPUs!\n");
-			exit(1);
-		} else if (n == 1) {
-			end = start;
+	if (!fgets(buff, sizeof(buff), fp)) {
+		printf("Failed to read %s!\n", fcpu);
+		exit(1);
+	}
+
+	len = strlen(buff);
+	for (i = 0; i <= len; i++) {
+		if (buff[i] == ',' || buff[i] == '\0') {
+			buff[i] = '\0';
+			n = sscanf(&buff[j], "%u-%u", &start, &end);
+			if (n <= 0) {
+				printf("Failed to retrieve # possible CPUs!\n");
+				exit(1);
+			} else if (n == 1) {
+				end = start;
+			}
+			possible_cpus += end - start + 1;
+			j = i + 1;
 		}
-		possible_cpus = start == 0 ? end + 1 : 0;
-		break;
 	}
+
 	fclose(fp);
 
 	return possible_cpus;
-- 
2.19.1

[PATCH 4.20 111/171] bpf: run bpf programs with preemption disabled

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6cab5e90ab2bd323c9f3811b6c70a4687df51e27 ]

Disabled preemption is necessary for proper access to per-cpu maps
from BPF programs.

But the sender side of socket filters didn't have preemption disabled:
unix_dgram_sendmsg->sk_filter->sk_filter_trim_cap->bpf_prog_run_save_cb->BPF_PROG_RUN

and a combination of af_packet with tun device didn't disable either:
tpacket_snd->packet_direct_xmit->packet_pick_tx_queue->ndo_select_queue->
  tun_select_queue->tun_ebpf_select_queue->bpf_prog_run_clear_cb->BPF_PROG_RUN

Disable preemption before executing BPF programs (both classic and extended).

Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/filter.h | 21 ++++++++++++++++++---
 kernel/bpf/cgroup.c    |  2 +-
 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/include/linux/filter.h b/include/linux/filter.h
index b776626aeb84..958eddbc44d3 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -591,8 +591,8 @@ static inline u8 *bpf_skb_cb(struct sk_buff *skb)
 	return qdisc_skb_cb(skb)->data;
 }
 
-static inline u32 bpf_prog_run_save_cb(const struct bpf_prog *prog,
-				       struct sk_buff *skb)
+static inline u32 __bpf_prog_run_save_cb(const struct bpf_prog *prog,
+					 struct sk_buff *skb)
 {
 	u8 *cb_data = bpf_skb_cb(skb);
 	u8 cb_saved[BPF_SKB_CB_LEN];
@@ -611,15 +611,30 @@ static inline u32 bpf_prog_run_save_cb(const struct bpf_prog *prog,
 	return res;
 }
 
+static inline u32 bpf_prog_run_save_cb(const struct bpf_prog *prog,
+				       struct sk_buff *skb)
+{
+	u32 res;
+
+	preempt_disable();
+	res = __bpf_prog_run_save_cb(prog, skb);
+	preempt_enable();
+	return res;
+}
+
 static inline u32 bpf_prog_run_clear_cb(const struct bpf_prog *prog,
 					struct sk_buff *skb)
 {
 	u8 *cb_data = bpf_skb_cb(skb);
+	u32 res;
 
 	if (unlikely(prog->cb_access))
 		memset(cb_data, 0, BPF_SKB_CB_LEN);
 
-	return BPF_PROG_RUN(prog, skb);
+	preempt_disable();
+	res = BPF_PROG_RUN(prog, skb);
+	preempt_enable();
+	return res;
 }
 
 static __always_inline u32 bpf_prog_run_xdp(const struct bpf_prog *prog,
diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c
index 9425c2fb872f..6c24b1fb2db8 100644
--- a/kernel/bpf/cgroup.c
+++ b/kernel/bpf/cgroup.c
@@ -572,7 +572,7 @@ int __cgroup_bpf_run_filter_skb(struct sock *sk,
 	bpf_compute_and_save_data_end(skb, &saved_data_end);
 
 	ret = BPF_PROG_RUN_ARRAY(cgrp->bpf.effective[type], skb,
-				 bpf_prog_run_save_cb);
+				 __bpf_prog_run_save_cb);
 	bpf_restore_data_end(skb, saved_data_end);
 	__skb_pull(skb, offset);
 	skb->sk = save_sk;
-- 
2.19.1

[PATCH 4.20 112/171] bpf: fix lockdep false positive in percpu_freelist

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a89fac57b5d080771efd4d71feaae19877cf68f0 ]

Lockdep warns about false positive:
[   12.492084] 00000000e6b28347 (&head->lock){+...}, at: pcpu_freelist_push+0x2a/0x40
[   12.492696] but this lock was taken by another, HARDIRQ-safe lock in the past:
[   12.493275]  (&rq->lock){-.-.}
[   12.493276]
[   12.493276]
[   12.493276] and interrupts could create inverse lock ordering between them.
[   12.493276]
[   12.494435]
[   12.494435] other info that might help us debug this:
[   12.494979]  Possible interrupt unsafe locking scenario:
[   12.494979]
[   12.495518]        CPU0                    CPU1
[   12.495879]        ----                    ----
[   12.496243]   lock(&head->lock);
[   12.496502]                                local_irq_disable();
[   12.496969]                                lock(&rq->lock);
[   12.497431]                                lock(&head->lock);
[   12.497890]   <Interrupt>
[   12.498104]     lock(&rq->lock);
[   12.498368]
[   12.498368]  *** DEADLOCK ***
[   12.498368]
[   12.498837] 1 lock held by dd/276:
[   12.499110]  #0: 00000000c58cb2ee (rcu_read_lock){....}, at: trace_call_bpf+0x5e/0x240
[   12.499747]
[   12.499747] the shortest dependencies between 2nd lock and 1st lock:
[   12.500389]  -> (&rq->lock){-.-.} {
[   12.500669]     IN-HARDIRQ-W at:
[   12.500934]                       _raw_spin_lock+0x2f/0x40
[   12.501373]                       scheduler_tick+0x4c/0xf0
[   12.501812]                       update_process_times+0x40/0x50
[   12.502294]                       tick_periodic+0x27/0xb0
[   12.502723]                       tick_handle_periodic+0x1f/0x60
[   12.503203]                       timer_interrupt+0x11/0x20
[   12.503651]                       __handle_irq_event_percpu+0x43/0x2c0
[   12.504167]                       handle_irq_event_percpu+0x20/0x50
[   12.504674]                       handle_irq_event+0x37/0x60
[   12.505139]                       handle_level_irq+0xa7/0x120
[   12.505601]                       handle_irq+0xa1/0x150
[   12.506018]                       do_IRQ+0x77/0x140
[   12.506411]                       ret_from_intr+0x0/0x1d
[   12.506834]                       _raw_spin_unlock_irqrestore+0x53/0x60
[   12.507362]                       __setup_irq+0x481/0x730
[   12.507789]                       setup_irq+0x49/0x80
[   12.508195]                       hpet_time_init+0x21/0x32
[   12.508644]                       x86_late_time_init+0xb/0x16
[   12.509106]                       start_kernel+0x390/0x42a
[   12.509554]                       secondary_startup_64+0xa4/0xb0
[   12.510034]     IN-SOFTIRQ-W at:
[   12.510305]                       _raw_spin_lock+0x2f/0x40
[   12.510772]                       try_to_wake_up+0x1c7/0x4e0
[   12.511220]                       swake_up_locked+0x20/0x40
[   12.511657]                       swake_up_one+0x1a/0x30
[   12.512070]                       rcu_process_callbacks+0xc5/0x650
[   12.512553]                       __do_softirq+0xe6/0x47b
[   12.512978]                       irq_exit+0xc3/0xd0
[   12.513372]                       smp_apic_timer_interrupt+0xa9/0x250
[   12.513876]                       apic_timer_interrupt+0xf/0x20
[   12.514343]                       default_idle+0x1c/0x170
[   12.514765]                       do_idle+0x199/0x240
[   12.515159]                       cpu_startup_entry+0x19/0x20
[   12.515614]                       start_kernel+0x422/0x42a
[   12.516045]                       secondary_startup_64+0xa4/0xb0
[   12.516521]     INITIAL USE at:
[   12.516774]                      _raw_spin_lock_irqsave+0x38/0x50
[   12.517258]                      rq_attach_root+0x16/0xd0
[   12.517685]                      sched_init+0x2f2/0x3eb
[   12.518096]                      start_kernel+0x1fb/0x42a
[   12.518525]                      secondary_startup_64+0xa4/0xb0
[   12.518986]   }
[   12.519132]   ... key      at: [<ffffffff82b7bc28>] __key.71384+0x0/0x8
[   12.519649]   ... acquired at:
[   12.519892]    pcpu_freelist_pop+0x7b/0xd0
[   12.520221]    bpf_get_stackid+0x1d2/0x4d0
[   12.520563]    ___bpf_prog_run+0x8b4/0x11a0
[   12.520887]
[   12.521008] -> (&head->lock){+...} {
[   12.521292]    HARDIRQ-ON-W at:
[   12.521539]                     _raw_spin_lock+0x2f/0x40
[   12.521950]                     pcpu_freelist_push+0x2a/0x40
[   12.522396]                     bpf_get_stackid+0x494/0x4d0
[   12.522828]                     ___bpf_prog_run+0x8b4/0x11a0
[   12.523296]    INITIAL USE at:
[   12.523537]                    _raw_spin_lock+0x2f/0x40
[   12.523944]                    pcpu_freelist_populate+0xc0/0x120
[   12.524417]                    htab_map_alloc+0x405/0x500
[   12.524835]                    __do_sys_bpf+0x1a3/0x1a90
[   12.525253]                    do_syscall_64+0x4a/0x180
[   12.525659]                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   12.526167]  }
[   12.526311]  ... key      at: [<ffffffff838f7668>] __key.13130+0x0/0x8
[   12.526812]  ... acquired at:
[   12.527047]    __lock_acquire+0x521/0x1350
[   12.527371]    lock_acquire+0x98/0x190
[   12.527680]    _raw_spin_lock+0x2f/0x40
[   12.527994]    pcpu_freelist_push+0x2a/0x40
[   12.528325]    bpf_get_stackid+0x494/0x4d0
[   12.528645]    ___bpf_prog_run+0x8b4/0x11a0
[   12.528970]
[   12.529092]
[   12.529092] stack backtrace:
[   12.529444] CPU: 0 PID: 276 Comm: dd Not tainted 5.0.0-rc3-00018-g2fa53f892422 #475
[   12.530043] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[   12.530750] Call Trace:
[   12.530948]  dump_stack+0x5f/0x8b
[   12.531248]  check_usage_backwards+0x10c/0x120
[   12.531598]  ? ___bpf_prog_run+0x8b4/0x11a0
[   12.531935]  ? mark_lock+0x382/0x560
[   12.532229]  mark_lock+0x382/0x560
[   12.532496]  ? print_shortest_lock_dependencies+0x180/0x180
[   12.532928]  __lock_acquire+0x521/0x1350
[   12.533271]  ? find_get_entry+0x17f/0x2e0
[   12.533586]  ? find_get_entry+0x19c/0x2e0
[   12.533902]  ? lock_acquire+0x98/0x190
[   12.534196]  lock_acquire+0x98/0x190
[   12.534482]  ? pcpu_freelist_push+0x2a/0x40
[   12.534810]  _raw_spin_lock+0x2f/0x40
[   12.535099]  ? pcpu_freelist_push+0x2a/0x40
[   12.535432]  pcpu_freelist_push+0x2a/0x40
[   12.535750]  bpf_get_stackid+0x494/0x4d0
[   12.536062]  ___bpf_prog_run+0x8b4/0x11a0

It has been explained that is a false positive here:
https://lkml.org/lkml/2018/7/25/756
Recap:
- stackmap uses pcpu_freelist
- The lock in pcpu_freelist is a percpu lock
- stackmap is only used by tracing bpf_prog
- A tracing bpf_prog cannot be run if another bpf_prog
  has already been running (ensured by the percpu bpf_prog_active counter).

Eric pointed out that this lockdep splats stops other
legit lockdep splats in selftests/bpf/test_progs.c.

Fix this by calling local_irq_save/restore for stackmap.

Another false positive had also been worked around by calling
local_irq_save in commit 89ad2fa3f043 ("bpf: fix lockdep splat").
That commit added unnecessary irq_save/restore to fast path of
bpf hash map. irqs are already disabled at that point, since htab
is holding per bucket spin_lock with irqsave.

Let's reduce overhead for htab by introducing __pcpu_freelist_push/pop
function w/o irqsave and convert pcpu_freelist_push/pop to irqsave
to be used elsewhere (right now only in stackmap).
It stops lockdep false positive in stackmap with a bit of acceptable overhead.

Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/hashtab.c         |  4 ++--
 kernel/bpf/percpu_freelist.c | 41 +++++++++++++++++++++++++-----------
 kernel/bpf/percpu_freelist.h |  4 ++++
 3 files changed, 35 insertions(+), 14 deletions(-)

diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index 2c1790288138..3388c0b85a57 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -677,7 +677,7 @@ static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l)
 	}
 
 	if (htab_is_prealloc(htab)) {
-		pcpu_freelist_push(&htab->freelist, &l->fnode);
+		__pcpu_freelist_push(&htab->freelist, &l->fnode);
 	} else {
 		atomic_dec(&htab->count);
 		l->htab = htab;
@@ -739,7 +739,7 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key,
 		} else {
 			struct pcpu_freelist_node *l;
 
-			l = pcpu_freelist_pop(&htab->freelist);
+			l = __pcpu_freelist_pop(&htab->freelist);
 			if (!l)
 				return ERR_PTR(-E2BIG);
 			l_new = container_of(l, struct htab_elem, fnode);
diff --git a/kernel/bpf/percpu_freelist.c b/kernel/bpf/percpu_freelist.c
index 673fa6fe2d73..0c1b4ba9e90e 100644
--- a/kernel/bpf/percpu_freelist.c
+++ b/kernel/bpf/percpu_freelist.c
@@ -28,8 +28,8 @@ void pcpu_freelist_destroy(struct pcpu_freelist *s)
 	free_percpu(s->freelist);
 }
 
-static inline void __pcpu_freelist_push(struct pcpu_freelist_head *head,
-					struct pcpu_freelist_node *node)
+static inline void ___pcpu_freelist_push(struct pcpu_freelist_head *head,
+					 struct pcpu_freelist_node *node)
 {
 	raw_spin_lock(&head->lock);
 	node->next = head->first;
@@ -37,12 +37,22 @@ static inline void __pcpu_freelist_push(struct pcpu_freelist_head *head,
 	raw_spin_unlock(&head->lock);
 }
 
-void pcpu_freelist_push(struct pcpu_freelist *s,
+void __pcpu_freelist_push(struct pcpu_freelist *s,
 			struct pcpu_freelist_node *node)
 {
 	struct pcpu_freelist_head *head = this_cpu_ptr(s->freelist);
 
-	__pcpu_freelist_push(head, node);
+	___pcpu_freelist_push(head, node);
+}
+
+void pcpu_freelist_push(struct pcpu_freelist *s,
+			struct pcpu_freelist_node *node)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__pcpu_freelist_push(s, node);
+	local_irq_restore(flags);
 }
 
 void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
@@ -63,7 +73,7 @@ void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
 	for_each_possible_cpu(cpu) {
 again:
 		head = per_cpu_ptr(s->freelist, cpu);
-		__pcpu_freelist_push(head, buf);
+		___pcpu_freelist_push(head, buf);
 		i++;
 		buf += elem_size;
 		if (i == nr_elems)
@@ -74,14 +84,12 @@ void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
 	local_irq_restore(flags);
 }
 
-struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
+struct pcpu_freelist_node *__pcpu_freelist_pop(struct pcpu_freelist *s)
 {
 	struct pcpu_freelist_head *head;
 	struct pcpu_freelist_node *node;
-	unsigned long flags;
 	int orig_cpu, cpu;
 
-	local_irq_save(flags);
 	orig_cpu = cpu = raw_smp_processor_id();
 	while (1) {
 		head = per_cpu_ptr(s->freelist, cpu);
@@ -89,16 +97,25 @@ struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
 		node = head->first;
 		if (node) {
 			head->first = node->next;
-			raw_spin_unlock_irqrestore(&head->lock, flags);
+			raw_spin_unlock(&head->lock);
 			return node;
 		}
 		raw_spin_unlock(&head->lock);
 		cpu = cpumask_next(cpu, cpu_possible_mask);
 		if (cpu >= nr_cpu_ids)
 			cpu = 0;
-		if (cpu == orig_cpu) {
-			local_irq_restore(flags);
+		if (cpu == orig_cpu)
 			return NULL;
-		}
 	}
 }
+
+struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *s)
+{
+	struct pcpu_freelist_node *ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ret = __pcpu_freelist_pop(s);
+	local_irq_restore(flags);
+	return ret;
+}
diff --git a/kernel/bpf/percpu_freelist.h b/kernel/bpf/percpu_freelist.h
index 3049aae8ea1e..c3960118e617 100644
--- a/kernel/bpf/percpu_freelist.h
+++ b/kernel/bpf/percpu_freelist.h
@@ -22,8 +22,12 @@ struct pcpu_freelist_node {
 	struct pcpu_freelist_node *next;
 };
 
+/* pcpu_freelist_* do spin_lock_irqsave. */
 void pcpu_freelist_push(struct pcpu_freelist *, struct pcpu_freelist_node *);
 struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *);
+/* __pcpu_freelist_* do spin_lock only. caller must disable irqs. */
+void __pcpu_freelist_push(struct pcpu_freelist *, struct pcpu_freelist_node *);
+struct pcpu_freelist_node *__pcpu_freelist_pop(struct pcpu_freelist *);
 void pcpu_freelist_populate(struct pcpu_freelist *s, void *buf, u32 elem_size,
 			    u32 nr_elems);
 int pcpu_freelist_init(struct pcpu_freelist *);
-- 
2.19.1

[PATCH 4.20 113/171] bpf: fix potential deadlock in bpf_prog_register

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e16ec34039c701594d55d08a5aa49ee3e1abc821 ]

Lockdep found a potential deadlock between cpu_hotplug_lock, bpf_event_mutex, and cpuctx_mutex:
[   13.007000] WARNING: possible circular locking dependency detected
[   13.007587] 5.0.0-rc3-00018-g2fa53f892422-dirty #477 Not tainted
[   13.008124] ------------------------------------------------------
[   13.008624] test_progs/246 is trying to acquire lock:
[   13.009030] 0000000094160d1d (tracepoints_mutex){+.+.}, at: tracepoint_probe_register_prio+0x2d/0x300
[   13.009770]
[   13.009770] but task is already holding lock:
[   13.010239] 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60
[   13.010877]
[   13.010877] which lock already depends on the new lock.
[   13.010877]
[   13.011532]
[   13.011532] the existing dependency chain (in reverse order) is:
[   13.012129]
[   13.012129] -> #4 (bpf_event_mutex){+.+.}:
[   13.012582]        perf_event_query_prog_array+0x9b/0x130
[   13.013016]        _perf_ioctl+0x3aa/0x830
[   13.013354]        perf_ioctl+0x2e/0x50
[   13.013668]        do_vfs_ioctl+0x8f/0x6a0
[   13.014003]        ksys_ioctl+0x70/0x80
[   13.014320]        __x64_sys_ioctl+0x16/0x20
[   13.014668]        do_syscall_64+0x4a/0x180
[   13.015007]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   13.015469]
[   13.015469] -> #3 (&cpuctx_mutex){+.+.}:
[   13.015910]        perf_event_init_cpu+0x5a/0x90
[   13.016291]        perf_event_init+0x1b2/0x1de
[   13.016654]        start_kernel+0x2b8/0x42a
[   13.016995]        secondary_startup_64+0xa4/0xb0
[   13.017382]
[   13.017382] -> #2 (pmus_lock){+.+.}:
[   13.017794]        perf_event_init_cpu+0x21/0x90
[   13.018172]        cpuhp_invoke_callback+0xb3/0x960
[   13.018573]        _cpu_up+0xa7/0x140
[   13.018871]        do_cpu_up+0xa4/0xc0
[   13.019178]        smp_init+0xcd/0xd2
[   13.019483]        kernel_init_freeable+0x123/0x24f
[   13.019878]        kernel_init+0xa/0x110
[   13.020201]        ret_from_fork+0x24/0x30
[   13.020541]
[   13.020541] -> #1 (cpu_hotplug_lock.rw_sem){++++}:
[   13.021051]        static_key_slow_inc+0xe/0x20
[   13.021424]        tracepoint_probe_register_prio+0x28c/0x300
[   13.021891]        perf_trace_event_init+0x11f/0x250
[   13.022297]        perf_trace_init+0x6b/0xa0
[   13.022644]        perf_tp_event_init+0x25/0x40
[   13.023011]        perf_try_init_event+0x6b/0x90
[   13.023386]        perf_event_alloc+0x9a8/0xc40
[   13.023754]        __do_sys_perf_event_open+0x1dd/0xd30
[   13.024173]        do_syscall_64+0x4a/0x180
[   13.024519]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   13.024968]
[   13.024968] -> #0 (tracepoints_mutex){+.+.}:
[   13.025434]        __mutex_lock+0x86/0x970
[   13.025764]        tracepoint_probe_register_prio+0x2d/0x300
[   13.026215]        bpf_probe_register+0x40/0x60
[   13.026584]        bpf_raw_tracepoint_open.isra.34+0xa4/0x130
[   13.027042]        __do_sys_bpf+0x94f/0x1a90
[   13.027389]        do_syscall_64+0x4a/0x180
[   13.027727]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   13.028171]
[   13.028171] other info that might help us debug this:
[   13.028171]
[   13.028807] Chain exists of:
[   13.028807]   tracepoints_mutex --> &cpuctx_mutex --> bpf_event_mutex
[   13.028807]
[   13.029666]  Possible unsafe locking scenario:
[   13.029666]
[   13.030140]        CPU0                    CPU1
[   13.030510]        ----                    ----
[   13.030875]   lock(bpf_event_mutex);
[   13.031166]                                lock(&cpuctx_mutex);
[   13.031645]                                lock(bpf_event_mutex);
[   13.032135]   lock(tracepoints_mutex);
[   13.032441]
[   13.032441]  *** DEADLOCK ***
[   13.032441]
[   13.032911] 1 lock held by test_progs/246:
[   13.033239]  #0: 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60
[   13.033909]
[   13.033909] stack backtrace:
[   13.034258] CPU: 1 PID: 246 Comm: test_progs Not tainted 5.0.0-rc3-00018-g2fa53f892422-dirty #477
[   13.034964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[   13.035657] Call Trace:
[   13.035859]  dump_stack+0x5f/0x8b
[   13.036130]  print_circular_bug.isra.37+0x1ce/0x1db
[   13.036526]  __lock_acquire+0x1158/0x1350
[   13.036852]  ? lock_acquire+0x98/0x190
[   13.037154]  lock_acquire+0x98/0x190
[   13.037447]  ? tracepoint_probe_register_prio+0x2d/0x300
[   13.037876]  __mutex_lock+0x86/0x970
[   13.038167]  ? tracepoint_probe_register_prio+0x2d/0x300
[   13.038600]  ? tracepoint_probe_register_prio+0x2d/0x300
[   13.039028]  ? __mutex_lock+0x86/0x970
[   13.039337]  ? __mutex_lock+0x24a/0x970
[   13.039649]  ? bpf_probe_register+0x1d/0x60
[   13.039992]  ? __bpf_trace_sched_wake_idle_without_ipi+0x10/0x10
[   13.040478]  ? tracepoint_probe_register_prio+0x2d/0x300
[   13.040906]  tracepoint_probe_register_prio+0x2d/0x300
[   13.041325]  bpf_probe_register+0x40/0x60
[   13.041649]  bpf_raw_tracepoint_open.isra.34+0xa4/0x130
[   13.042068]  ? __might_fault+0x3e/0x90
[   13.042374]  __do_sys_bpf+0x94f/0x1a90
[   13.042678]  do_syscall_64+0x4a/0x180
[   13.042975]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   13.043382] RIP: 0033:0x7f23b10a07f9
[   13.045155] RSP: 002b:00007ffdef42fdd8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[   13.045759] RAX: ffffffffffffffda RBX: 00007ffdef42ff70 RCX: 00007f23b10a07f9
[   13.046326] RDX: 0000000000000070 RSI: 00007ffdef42fe10 RDI: 0000000000000011
[   13.046893] RBP: 00007ffdef42fdf0 R08: 0000000000000038 R09: 00007ffdef42fe10
[   13.047462] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[   13.048029] R13: 0000000000000016 R14: 00007f23b1db4690 R15: 0000000000000000

Since tracepoints_mutex will be taken in tracepoint_probe_register/unregister()
there is no need to take bpf_event_mutex too.
bpf_event_mutex is protecting modifications to prog array used in kprobe/perf bpf progs.
bpf_raw_tracepoints don't need to take this mutex.

Fixes: c4f6699dfcb8 ("bpf: introduce BPF_RAW_TRACEPOINT")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/bpf_trace.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 9864a35c8bb5..6c28d519447d 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -1158,22 +1158,12 @@ static int __bpf_probe_register(struct bpf_raw_event_map *btp, struct bpf_prog *
 
 int bpf_probe_register(struct bpf_raw_event_map *btp, struct bpf_prog *prog)
 {
-	int err;
-
-	mutex_lock(&bpf_event_mutex);
-	err = __bpf_probe_register(btp, prog);
-	mutex_unlock(&bpf_event_mutex);
-	return err;
+	return __bpf_probe_register(btp, prog);
 }
 
 int bpf_probe_unregister(struct bpf_raw_event_map *btp, struct bpf_prog *prog)
 {
-	int err;
-
-	mutex_lock(&bpf_event_mutex);
-	err = tracepoint_probe_unregister(btp->tp, (void *)btp->bpf_func, prog);
-	mutex_unlock(&bpf_event_mutex);
-	return err;
+	return tracepoint_probe_unregister(btp->tp, (void *)btp->bpf_func, prog);
 }
 
 int bpf_get_perf_event_info(const struct perf_event *event, u32 *prog_id,
-- 
2.19.1

[PATCH 4.20 114/171] bpf: Fix syscalls stackmap lookup potential deadlock

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7c4cd051add3d00bbff008a133c936c515eaa8fe ]

The map_lookup_elem used to not acquiring spinlock
in order to optimize the reader.

It was true until commit 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
The syscall's map_lookup_elem(stackmap) calls bpf_stackmap_copy().
bpf_stackmap_copy() may find the elem no longer needed after the copy is done.
If that is the case, pcpu_freelist_push() saves this elem for reuse later.
This push requires a spinlock.

If a tracing bpf_prog got run in the middle of the syscall's
map_lookup_elem(stackmap) and this tracing bpf_prog is calling
bpf_get_stackid(stackmap) which also requires the same pcpu_freelist's
spinlock, it may end up with a dead lock situation as reported by
Eric Dumazet in https://patchwork.ozlabs.org/patch/1030266/

The situation is the same as the syscall's map_update_elem() which
needs to acquire the pcpu_freelist's spinlock and could race
with tracing bpf_prog.  Hence, this patch fixes it by protecting
bpf_stackmap_copy() with this_cpu_inc(bpf_prog_active)
to prevent tracing bpf_prog from running.

A later syscall's map_lookup_elem commit f1a2e44a3aec ("bpf: add queue and stack maps")
also acquires a spinlock and races with tracing bpf_prog similarly.
Hence, this patch is forward looking and protects the majority
of the map lookups.  bpf_map_offload_lookup_elem() is the exception
since it is for network bpf_prog only (i.e. never called by tracing
bpf_prog).

Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/syscall.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index cf5040fd5434..5f03ddf7b615 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -712,8 +712,13 @@ static int map_lookup_elem(union bpf_attr *attr)
 
 	if (bpf_map_is_dev_bound(map)) {
 		err = bpf_map_offload_lookup_elem(map, key, value);
-	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
-		   map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH) {
+		goto done;
+	}
+
+	preempt_disable();
+	this_cpu_inc(bpf_prog_active);
+	if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
+	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH) {
 		err = bpf_percpu_hash_copy(map, key, value);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
 		err = bpf_percpu_array_copy(map, key, value);
@@ -743,7 +748,10 @@ static int map_lookup_elem(union bpf_attr *attr)
 		}
 		rcu_read_unlock();
 	}
+	this_cpu_dec(bpf_prog_active);
+	preempt_enable();
 
+done:
 	if (err)
 		goto free_value;
 
-- 
2.19.1

[PATCH 4.20 115/171] drm/amdgpu: Implement doorbell self-ring for NBIO 7.4

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 12292519d919ecde92e7e7c8acbcdb9f0c7c6013 ]

Fixes doorbell reflection on Vega20.

Change-Id: I0495139d160a9032dff5977289b1eec11c16f781
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c
index f8cee95d61cc..7d5cbadbe1cb 100644
--- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c
@@ -92,7 +92,20 @@ static void nbio_v7_4_enable_doorbell_aperture(struct amdgpu_device *adev,
 static void nbio_v7_4_enable_doorbell_selfring_aperture(struct amdgpu_device *adev,
 							bool enable)
 {
+	u32 tmp = 0;
 
+	if (enable) {
+		tmp = REG_SET_FIELD(tmp, DOORBELL_SELFRING_GPA_APER_CNTL, DOORBELL_SELFRING_GPA_APER_EN, 1) |
+		      REG_SET_FIELD(tmp, DOORBELL_SELFRING_GPA_APER_CNTL, DOORBELL_SELFRING_GPA_APER_MODE, 1) |
+		      REG_SET_FIELD(tmp, DOORBELL_SELFRING_GPA_APER_CNTL, DOORBELL_SELFRING_GPA_APER_SIZE, 0);
+
+		WREG32_SOC15(NBIO, 0, mmDOORBELL_SELFRING_GPA_APER_BASE_LOW,
+			     lower_32_bits(adev->doorbell.base));
+		WREG32_SOC15(NBIO, 0, mmDOORBELL_SELFRING_GPA_APER_BASE_HIGH,
+			     upper_32_bits(adev->doorbell.base));
+	}
+
+	WREG32_SOC15(NBIO, 0, mmDOORBELL_SELFRING_GPA_APER_CNTL, tmp);
 }
 
 static void nbio_v7_4_ih_doorbell_range(struct amdgpu_device *adev,
-- 
2.19.1

[PATCH 4.20 116/171] drm/amdgpu: fix the incorrect external id for raven series

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7e4545d372b560df10fa47281ef0783a479ce435 ]

This patch fixes the incorrect external id that kernel reports to user mode
driver. Raven2's rev_id is starts from 0x8, so its external id (0x81) should
start from rev_id + 0x79 (0x81 - 0x8). And Raven's rev_id should be 0x21 while
rev_id == 1.

Reported-by: Crystal Jin <Crystal.Jin@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/soc15.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c
index 4cc0dcb1a187..825d1cae85ab 100644
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -705,11 +705,13 @@ static int soc15_common_early_init(void *handle)
 		break;
 	case CHIP_RAVEN:
 		if (adev->rev_id >= 0x8)
-			adev->external_rev_id = adev->rev_id + 0x81;
+			adev->external_rev_id = adev->rev_id + 0x79;
 		else if (adev->pdev->device == 0x15d8)
 			adev->external_rev_id = adev->rev_id + 0x41;
+		else if (adev->rev_id == 1)
+			adev->external_rev_id = adev->rev_id + 0x20;
 		else
-			adev->external_rev_id = 0x1;
+			adev->external_rev_id = adev->rev_id + 0x01;
 
 		if (adev->rev_id >= 0x8) {
 			adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG |
-- 
2.19.1

[PATCH 4.20 117/171] drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b14e945bda8ae227d1bf2b1837c0c4a61721cd1a ]

When initializing clocks, a reference to the TCON channel 0 clock is
obtained. However, the clock is never prepared and enabled later.
Switching from simplefb to DRM actually disables the clock (that was
usually configured by U-Boot) because of that.

On the V3s, this results in a hang when writing to some mixer registers
when switching over to DRM from simplefb.

Fix this by preparing and enabling the clock when initializing other
clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is
apparently too late and results in the same mixer register access hang.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index f949287d926c..4e0562aa2cc9 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -760,6 +760,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,
 			return PTR_ERR(tcon->sclk0);
 		}
 	}
+	clk_prepare_enable(tcon->sclk0);
 
 	if (tcon->quirks->has_channel_1) {
 		tcon->sclk1 = devm_clk_get(dev, "tcon-ch1");
@@ -774,6 +775,7 @@ static int sun4i_tcon_init_clocks(struct device *dev,
 
 static void sun4i_tcon_free_clocks(struct sun4i_tcon *tcon)
 {
+	clk_disable_unprepare(tcon->sclk0);
 	clk_disable_unprepare(tcon->clk);
 }
 
-- 
2.19.1

[PATCH 4.20 118/171] dmaengine: at_xdmac: Fix wrongfull report of a channel as in use

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit dc3f595b6617ebc0307e0ce151e8f2f2b2489b95 ]

atchan->status variable is used to store two different information:
 - pass channel interrupts status from interrupt handler to tasklet;
 - channel information like whether it is cyclic or paused;

This causes a bug when device_terminate_all() is called,
(AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
a new descriptor for a cyclic transfer is created, the driver reports
the channel as in use:

if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
	dev_err(chan2dev(chan), "channel currently used\n");
	return NULL;
}

This patch fixes the bug by adding a different struct member to keep
the interrupts status separated from the channel status bits.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/at_xdmac.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 4e557684f792..fe69dccfa0c0 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -203,6 +203,7 @@ struct at_xdmac_chan {
 	u32				save_cim;
 	u32				save_cnda;
 	u32				save_cndc;
+	u32				irq_status;
 	unsigned long			status;
 	struct tasklet_struct		tasklet;
 	struct dma_slave_config		sconfig;
@@ -1580,8 +1581,8 @@ static void at_xdmac_tasklet(unsigned long data)
 	struct at_xdmac_desc	*desc;
 	u32			error_mask;
 
-	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08lx\n",
-		 __func__, atchan->status);
+	dev_dbg(chan2dev(&atchan->chan), "%s: status=0x%08x\n",
+		__func__, atchan->irq_status);
 
 	error_mask = AT_XDMAC_CIS_RBEIS
 		     | AT_XDMAC_CIS_WBEIS
@@ -1589,15 +1590,15 @@ static void at_xdmac_tasklet(unsigned long data)
 
 	if (at_xdmac_chan_is_cyclic(atchan)) {
 		at_xdmac_handle_cyclic(atchan);
-	} else if ((atchan->status & AT_XDMAC_CIS_LIS)
-		   || (atchan->status & error_mask)) {
+	} else if ((atchan->irq_status & AT_XDMAC_CIS_LIS)
+		   || (atchan->irq_status & error_mask)) {
 		struct dma_async_tx_descriptor  *txd;
 
-		if (atchan->status & AT_XDMAC_CIS_RBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_RBEIS)
 			dev_err(chan2dev(&atchan->chan), "read bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_WBEIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_WBEIS)
 			dev_err(chan2dev(&atchan->chan), "write bus error!!!");
-		if (atchan->status & AT_XDMAC_CIS_ROIS)
+		if (atchan->irq_status & AT_XDMAC_CIS_ROIS)
 			dev_err(chan2dev(&atchan->chan), "request overflow error!!!");
 
 		spin_lock(&atchan->lock);
@@ -1652,7 +1653,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 			atchan = &atxdmac->chan[i];
 			chan_imr = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
 			chan_status = at_xdmac_chan_read(atchan, AT_XDMAC_CIS);
-			atchan->status = chan_status & chan_imr;
+			atchan->irq_status = chan_status & chan_imr;
 			dev_vdbg(atxdmac->dma.dev,
 				 "%s: chan%d: imr=0x%x, status=0x%x\n",
 				 __func__, i, chan_imr, chan_status);
@@ -1666,7 +1667,7 @@ static irqreturn_t at_xdmac_interrupt(int irq, void *dev_id)
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
 				 at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
 
-			if (atchan->status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
+			if (atchan->irq_status & (AT_XDMAC_CIS_RBEIS | AT_XDMAC_CIS_WBEIS))
 				at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
 
 			tasklet_schedule(&atchan->tasklet);
-- 
2.19.1

[PATCH 4.20 119/171] vsock/virtio: fix kernel panic after device hot-unplug

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 22b5c0b63f32568e130fa2df4ba23efce3eb495b ]

virtio_vsock_remove() invokes the vsock_core_exit() also if there
are opened sockets for the AF_VSOCK protocol family. In this way
the vsock "transport" pointer is set to NULL, triggering the
kernel panic at the first socket activity.

This patch move the vsock_core_init()/vsock_core_exit() in the
virtio_vsock respectively in module_init and module_exit functions,
that cannot be invoked until there are open sockets.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1609699
Reported-by: Yan Fu <yafu@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 5d3cce9e8744..9dae54698737 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -75,6 +75,9 @@ static u32 virtio_transport_get_local_cid(void)
 {
 	struct virtio_vsock *vsock = virtio_vsock_get();
 
+	if (!vsock)
+		return VMADDR_CID_ANY;
+
 	return vsock->guest_cid;
 }
 
@@ -584,10 +587,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 
 	virtio_vsock_update_guest_cid(vsock);
 
-	ret = vsock_core_init(&virtio_transport.transport);
-	if (ret < 0)
-		goto out_vqs;
-
 	vsock->rx_buf_nr = 0;
 	vsock->rx_buf_max_nr = 0;
 	atomic_set(&vsock->queued_replies, 0);
@@ -618,8 +617,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
 	mutex_unlock(&the_virtio_vsock_mutex);
 	return 0;
 
-out_vqs:
-	vsock->vdev->config->del_vqs(vsock->vdev);
 out:
 	kfree(vsock);
 	mutex_unlock(&the_virtio_vsock_mutex);
@@ -669,7 +666,6 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 
 	mutex_lock(&the_virtio_vsock_mutex);
 	the_virtio_vsock = NULL;
-	vsock_core_exit();
 	mutex_unlock(&the_virtio_vsock_mutex);
 
 	vdev->config->del_vqs(vdev);
@@ -702,14 +698,28 @@ static int __init virtio_vsock_init(void)
 	virtio_vsock_workqueue = alloc_workqueue("virtio_vsock", 0, 0);
 	if (!virtio_vsock_workqueue)
 		return -ENOMEM;
+
 	ret = register_virtio_driver(&virtio_vsock_driver);
 	if (ret)
-		destroy_workqueue(virtio_vsock_workqueue);
+		goto out_wq;
+
+	ret = vsock_core_init(&virtio_transport.transport);
+	if (ret)
+		goto out_vdr;
+
+	return 0;
+
+out_vdr:
+	unregister_virtio_driver(&virtio_vsock_driver);
+out_wq:
+	destroy_workqueue(virtio_vsock_workqueue);
 	return ret;
+
 }
 
 static void __exit virtio_vsock_exit(void)
 {
+	vsock_core_exit();
 	unregister_virtio_driver(&virtio_vsock_driver);
 	destroy_workqueue(virtio_vsock_workqueue);
 }
-- 
2.19.1

[PATCH 4.20 120/171] vsock/virtio: reset connected sockets on device removal

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 85965487abc540368393a15491e6e7fcd230039d ]

When the virtio transport device disappear, we should reset all
connected sockets in order to inform the users.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 9dae54698737..15eb5d3d4750 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -634,6 +634,9 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 	flush_work(&vsock->event_work);
 	flush_work(&vsock->send_pkt_work);
 
+	/* Reset all connected sockets when the device disappear */
+	vsock_for_each_connected_socket(virtio_vsock_reset_sock);
+
 	vdev->config->reset(vdev);
 
 	mutex_lock(&vsock->rx_lock);
-- 
2.19.1

[PATCH 4.20 121/171] dmaengine: dmatest: Abort test in case of mapping error

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]

In case of mapping error the DMA addresses are invalid and continuing
will screw system memory or potentially something else.

[  222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0)
...
[  240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000
[  240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b
[  240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf
...

Abort any test if mapping failed.

Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data")
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dmatest.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index aa1712beb0cc..7b7fba0c9253 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -642,11 +642,9 @@ static int dmatest_func(void *data)
 			srcs[i] = um->addr[i] + src_off;
 			ret = dma_mapping_error(dev->dev, um->addr[i]);
 			if (ret) {
-				dmaengine_unmap_put(um);
 				result("src mapping error", total_tests,
 				       src_off, dst_off, len, ret);
-				failed_tests++;
-				continue;
+				goto error_unmap_continue;
 			}
 			um->to_cnt++;
 		}
@@ -661,11 +659,9 @@ static int dmatest_func(void *data)
 					       DMA_BIDIRECTIONAL);
 			ret = dma_mapping_error(dev->dev, dsts[i]);
 			if (ret) {
-				dmaengine_unmap_put(um);
 				result("dst mapping error", total_tests,
 				       src_off, dst_off, len, ret);
-				failed_tests++;
-				continue;
+				goto error_unmap_continue;
 			}
 			um->bidi_cnt++;
 		}
@@ -693,12 +689,10 @@ static int dmatest_func(void *data)
 		}
 
 		if (!tx) {
-			dmaengine_unmap_put(um);
 			result("prep error", total_tests, src_off,
 			       dst_off, len, ret);
 			msleep(100);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 
 		done->done = false;
@@ -707,12 +701,10 @@ static int dmatest_func(void *data)
 		cookie = tx->tx_submit(tx);
 
 		if (dma_submit_error(cookie)) {
-			dmaengine_unmap_put(um);
 			result("submit error", total_tests, src_off,
 			       dst_off, len, ret);
 			msleep(100);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 		dma_async_issue_pending(chan);
 
@@ -725,16 +717,14 @@ static int dmatest_func(void *data)
 			dmaengine_unmap_put(um);
 			result("test timed out", total_tests, src_off, dst_off,
 			       len, 0);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		} else if (status != DMA_COMPLETE) {
 			dmaengine_unmap_put(um);
 			result(status == DMA_ERROR ?
 			       "completion error status" :
 			       "completion busy status", total_tests, src_off,
 			       dst_off, len, ret);
-			failed_tests++;
-			continue;
+			goto error_unmap_continue;
 		}
 
 		dmaengine_unmap_put(um);
@@ -779,6 +769,12 @@ static int dmatest_func(void *data)
 			verbose_result("test passed", total_tests, src_off,
 				       dst_off, len, 0);
 		}
+
+		continue;
+
+error_unmap_continue:
+		dmaengine_unmap_put(um);
+		failed_tests++;
 	}
 	ktime = ktime_sub(ktime_get(), ktime);
 	ktime = ktime_sub(ktime, comparetime);
-- 
2.19.1

[PATCH 4.20 122/171] selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INET

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 952b72f89ae23b316da8c1021b18d0c388ad6cc4 ]

In selftests the config fragment for netfilter was added as
NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y

Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/config | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config
index 1017313e41a8..59caa8f71cd8 100644
--- a/tools/testing/selftests/netfilter/config
+++ b/tools/testing/selftests/netfilter/config
@@ -1,2 +1,2 @@
 CONFIG_NET_NS=y
-NF_TABLES_INET=y
+CONFIG_NF_TABLES_INET=y
-- 
2.19.1

[PATCH 4.20 123/171] selftests: netfilter: add simple masq/redirect test cases

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 98bfc3414bda335dbd7fec58bde6266f991801d7 ]

Check basic nat/redirect/masquerade for ipv4 and ipv6.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/Makefile   |   2 +-
 tools/testing/selftests/netfilter/nft_nat.sh | 762 +++++++++++++++++++
 2 files changed, 763 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/netfilter/nft_nat.sh

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index 47ed6cef93fb..c9ff2b47bd1c 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for netfilter selftests
 
-TEST_PROGS := nft_trans_stress.sh
+TEST_PROGS := nft_trans_stress.sh nft_nat.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
new file mode 100755
index 000000000000..8ec76681605c
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -0,0 +1,762 @@
+#!/bin/bash
+#
+# This test is for basic NAT functionality: snat, dnat, redirect, masquerade.
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip netns add ns0
+ip netns add ns1
+ip netns add ns2
+
+ip link add veth0 netns ns0 type veth peer name eth0 netns ns1
+ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
+
+ip -net ns0 link set lo up
+ip -net ns0 link set veth0 up
+ip -net ns0 addr add 10.0.1.1/24 dev veth0
+ip -net ns0 addr add dead:1::1/64 dev veth0
+
+ip -net ns0 link set veth1 up
+ip -net ns0 addr add 10.0.2.1/24 dev veth1
+ip -net ns0 addr add dead:2::1/64 dev veth1
+
+for i in 1 2; do
+  ip -net ns$i link set lo up
+  ip -net ns$i link set eth0 up
+  ip -net ns$i addr add 10.0.$i.99/24 dev eth0
+  ip -net ns$i route add default via 10.0.$i.1
+  ip -net ns$i addr add dead:$i::99/64 dev eth0
+  ip -net ns$i route add default via dead:$i::1
+done
+
+bad_counter()
+{
+	local ns=$1
+	local counter=$2
+	local expect=$3
+
+	echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2
+	ip netns exec $ns nft list counter inet filter $counter 1>&2
+}
+
+check_counters()
+{
+	ns=$1
+	local lret=0
+
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0in "packets 1 bytes 84"
+		lret=1
+	fi
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0out "packets 1 bytes 84"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0in6 "$expect"
+		lret=1
+	fi
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0out6 "$expect"
+		lret=1
+	fi
+
+	return $lret
+}
+
+check_ns0_counters()
+{
+	local ns=$1
+	local lret=0
+
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0in "packets 0 bytes 0"
+		lret=1
+	fi
+
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0in6 "packets 0 bytes 0"
+		lret=1
+	fi
+
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0out "packets 0 bytes 0"
+		lret=1
+	fi
+	cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter ns0 ns0out6 "packets 0 bytes 0"
+		lret=1
+	fi
+
+	for dir in "in" "out" ; do
+		expect="packets 1 bytes 84"
+		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 $ns$dir "$expect"
+			lret=1
+		fi
+
+		expect="packets 1 bytes 104"
+		cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 $ns$dir6 "$expect"
+			lret=1
+		fi
+	done
+
+	return $lret
+}
+
+reset_counters()
+{
+	for i in 0 1 2;do
+		ip netns exec ns$i nft reset counters inet > /dev/null
+	done
+}
+
+test_local_dnat6()
+{
+	local lret=0
+ip netns exec ns0 nft -f - <<EOF
+table ip6 nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		ip6 daddr dead:1::99 dnat to dead:2::99
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add add ip6 dnat hook"
+		return $ksft_skip
+	fi
+
+	# ping netns1, expect rewrite to netns2
+	ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping6 failed"
+		return $lret
+	fi
+
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 0 count in ns1
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 1 packet in ns2
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was NATted to ns2"
+	ip netns exec ns0 nft flush chain ip6 nat output
+
+	return $lret
+}
+
+test_local_dnat()
+{
+	local lret=0
+ip netns exec ns0 nft -f - <<EOF
+table ip nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		ip daddr 10.0.1.99 dnat to 10.0.2.99
+	}
+}
+EOF
+	# ping netns1, expect rewrite to netns2
+	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping failed"
+		return $lret
+	fi
+
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 0 count in ns1
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 1 packet in ns2
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ping to ns1 was NATted to ns2"
+
+	ip netns exec ns0 nft flush chain ip nat output
+
+	reset_counters
+	ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping failed"
+		return $lret
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 1 count in ns1
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns0 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# expect 0 packet in ns2
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns2$dir "$expect"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ping to ns1 OK after nat output chain flush"
+
+	return $lret
+}
+
+
+test_masquerade6()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 via ipv6"
+		return 1
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add masquerading rule
+ip netns exec ns0 nft -f - <<EOF
+table ip6 nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		meta oif veth0 masquerade
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerading"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from ns0, due to masquerade
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft flush chain ip6 nat postrouting
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not flush ip6 nat postrouting" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IPv6 masquerade for ns2"
+
+	return $lret
+}
+
+test_masquerade()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: canot ping ns1 from ns2"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add masquerading rule
+ip netns exec ns0 nft -f - <<EOF
+table ip nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		meta oif veth0 masquerade
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ip masquerading"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from ns0, due to masquerade
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft flush chain ip nat postrouting
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not flush nat postrouting" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IP masquerade for ns2"
+
+	return $lret
+}
+
+test_redirect6()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannnot ping ns1 from ns2 via ipv6"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add redirect rule
+ip netns exec ns0 nft -f - <<EOF
+table ip6 nat {
+	chain prerouting {
+		type nat hook prerouting priority 0; policy accept;
+		meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ip6 redirect"
+		lret=1
+	fi
+
+	# ns1 should have seen no packets from ns2, due to redirection
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns0 should have seen packets from ns2, due to masquerade
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft delete table ip6 nat
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete ip6 nat table" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IPv6 redirection for ns2"
+
+	return $lret
+}
+
+test_redirect()
+{
+	local lret=0
+
+	ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns2$dir "$expect"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns2 ns1$dir "$expect"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add redirect rule
+ip netns exec ns0 nft -f - <<EOF
+table ip nat {
+	chain prerouting {
+		type nat hook prerouting priority 0; policy accept;
+		meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect
+	}
+}
+EOF
+	ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping ns1 from ns2 with active ip redirect"
+		lret=1
+	fi
+
+	# ns1 should have seen no packets from ns2, due to redirection
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+
+		cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	# ns0 should have seen packets from ns2, due to masquerade
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter ns1 ns0$dir "$expect"
+			lret=1
+		fi
+	done
+
+	ip netns exec ns0 nft delete table ip nat
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete nat table" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: IP redirection for ns2"
+
+	return $lret
+}
+
+
+# ip netns exec ns0 ping -c 1 -q 10.0.$i.99
+for i in 0 1 2; do
+ip netns exec ns$i nft -f - <<EOF
+table inet filter {
+	counter ns0in {}
+	counter ns1in {}
+	counter ns2in {}
+
+	counter ns0out {}
+	counter ns1out {}
+	counter ns2out {}
+
+	counter ns0in6 {}
+	counter ns1in6 {}
+	counter ns2in6 {}
+
+	counter ns0out6 {}
+	counter ns1out6 {}
+	counter ns2out6 {}
+
+	map nsincounter {
+		type ipv4_addr : counter
+		elements = { 10.0.1.1 : "ns0in",
+			     10.0.2.1 : "ns0in",
+			     10.0.1.99 : "ns1in",
+			     10.0.2.99 : "ns2in" }
+	}
+
+	map nsincounter6 {
+		type ipv6_addr : counter
+		elements = { dead:1::1 : "ns0in6",
+			     dead:2::1 : "ns0in6",
+			     dead:1::99 : "ns1in6",
+			     dead:2::99 : "ns2in6" }
+	}
+
+	map nsoutcounter {
+		type ipv4_addr : counter
+		elements = { 10.0.1.1 : "ns0out",
+			     10.0.2.1 : "ns0out",
+			     10.0.1.99: "ns1out",
+			     10.0.2.99: "ns2out" }
+	}
+
+	map nsoutcounter6 {
+		type ipv6_addr : counter
+		elements = { dead:1::1 : "ns0out6",
+			     dead:2::1 : "ns0out6",
+			     dead:1::99 : "ns1out6",
+			     dead:2::99 : "ns2out6" }
+	}
+
+	chain input {
+		type filter hook input priority 0; policy accept;
+		counter name ip saddr map @nsincounter
+		icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6
+	}
+	chain output {
+		type filter hook output priority 0; policy accept;
+		counter name ip daddr map @nsoutcounter
+		icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6
+	}
+}
+EOF
+done
+
+sleep 3
+# test basic connectivity
+for i in 1 2; do
+  ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null
+  if [ $? -ne 0 ];then
+  	echo "ERROR: Could not reach other namespace(s)" 1>&2
+	ret=1
+  fi
+
+  ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null
+  if [ $? -ne 0 ];then
+	echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
+	ret=1
+  fi
+  check_counters ns$i
+  if [ $? -ne 0 ]; then
+	ret=1
+  fi
+
+  check_ns0_counters ns$i
+  if [ $? -ne 0 ]; then
+	ret=1
+  fi
+  reset_counters
+done
+
+if [ $ret -eq 0 ];then
+	echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2"
+fi
+
+reset_counters
+test_local_dnat
+test_local_dnat6
+
+reset_counters
+test_masquerade
+test_masquerade6
+
+reset_counters
+test_redirect
+test_redirect6
+
+for i in 0 1 2; do ip netns del ns$i;done
+
+exit $ret
-- 
2.19.1

[PATCH 4.20 124/171] netfilter: nf_nat: skip nat clash resolution for same-origin entries

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4e35c1cb9460240e983a01745b5f29fe3a4d8e39 ]

It is possible that two concurrent packets originating from the same
socket of a connection-less protocol (e.g. UDP) can end up having
different IP_CT_DIR_REPLY tuples which results in one of the packets
being dropped.

To illustrate this, consider the following simplified scenario:

1. Packet A and B are sent at the same time from two different threads
   by same UDP socket.  No matching conntrack entry exists yet.
   Both packets cause allocation of a new conntrack entry.
2. get_unique_tuple gets called for A.  No clashing entry found.
   conntrack entry for A is added to main conntrack table.
3. get_unique_tuple is called for B and will find that the reply
   tuple of B is already taken by A.
   It will allocate a new UDP source port for B to resolve the clash.
4. conntrack entry for B cannot be added to main conntrack table
   because its ORIGINAL direction is clashing with A and the REPLY
   directions of A and B are not the same anymore due to UDP source
   port reallocation done in step 3.

This patch modifies nf_conntrack_tuple_taken so it doesn't consider
colliding reply tuples if the IP_CT_DIR_ORIGINAL tuples are equal.

[ Florian: simplify patch to not use .allow_clash setting
  and always ignore identical flows ]

Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_core.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index e92e749aff53..830b1328fe97 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1007,6 +1007,22 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple,
 		}
 
 		if (nf_ct_key_equal(h, tuple, zone, net)) {
+			/* Tuple is taken already, so caller will need to find
+			 * a new source port to use.
+			 *
+			 * Only exception:
+			 * If the *original tuples* are identical, then both
+			 * conntracks refer to the same flow.
+			 * This is a rare situation, it can occur e.g. when
+			 * more than one UDP packet is sent from same socket
+			 * in different threads.
+			 *
+			 * Let nf_ct_resolve_clash() deal with this later.
+			 */
+			if (nf_ct_tuple_equal(&ignored_conntrack->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
+					      &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple))
+				continue;
+
 			NF_CT_STAT_INC_ATOMIC(net, found);
 			rcu_read_unlock();
 			return 1;
-- 
2.19.1

[PATCH 4.20 125/171] s390/qeth: release cmd buffer in error paths

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 5065b2dd3e5f9247a6c9d67974bc0472bf561b9d ]

Whenever we fail before/while starting an IO, make sure to release the
IO buffer. Usually qeth_irq() would do this for us, but if the IO
doesn't even start we obviously won't get an interrupt for it either.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 0c9a5250dd93..623ddda5d2ba 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -568,6 +568,7 @@ static int __qeth_issue_next_read(struct qeth_card *card)
 		QETH_DBF_MESSAGE(2, "error %i on device %x when starting next read ccw!\n",
 				 rc, CARD_DEVID(card));
 		atomic_set(&channel->irq_pending, 0);
+		qeth_release_buffer(channel, iob);
 		card->read_or_write_problem = 1;
 		qeth_schedule_recovery(card);
 		wake_up(&card->wait_q);
@@ -1129,6 +1130,8 @@ static void qeth_irq(struct ccw_device *cdev, unsigned long intparm,
 		rc = qeth_get_problem(card, cdev, irb);
 		if (rc) {
 			card->read_or_write_problem = 1;
+			if (iob)
+				qeth_release_buffer(iob->channel, iob);
 			qeth_clear_ipacmd_list(card);
 			qeth_schedule_recovery(card);
 			goto out;
@@ -1811,6 +1814,7 @@ static int qeth_idx_activate_get_answer(struct qeth_card *card,
 		QETH_DBF_MESSAGE(2, "Error2 in activating channel rc=%d\n", rc);
 		QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc);
 		atomic_set(&channel->irq_pending, 0);
+		qeth_release_buffer(channel, iob);
 		wake_up(&card->wait_q);
 		return rc;
 	}
@@ -1880,6 +1884,7 @@ static int qeth_idx_activate_channel(struct qeth_card *card,
 			rc);
 		QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
 		atomic_set(&channel->irq_pending, 0);
+		qeth_release_buffer(channel, iob);
 		wake_up(&card->wait_q);
 		return rc;
 	}
@@ -2060,6 +2065,7 @@ int qeth_send_control_data(struct qeth_card *card, int len,
 	}
 	reply = qeth_alloc_reply(card);
 	if (!reply) {
+		qeth_release_buffer(channel, iob);
 		return -ENOMEM;
 	}
 	reply->callback = reply_cb;
-- 
2.19.1

[PATCH 4.20 126/171] s390/qeth: fix use-after-free in error path

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit afa0c5904ba16d59b0454f7ee4c807dae350f432 ]

The error path in qeth_alloc_qdio_buffers() that takes care of
cleaning up the Output Queues is buggy. It first frees the queue, but
then calls qeth_clear_outq_buffers() with that very queue struct.

Make the call to qeth_clear_outq_buffers() part of the free action
(in the correct order), and while at it fix the naming of the helper.

Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 623ddda5d2ba..89cc172820ca 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2397,11 +2397,12 @@ static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *q, int bidx)
 	return 0;
 }
 
-static void qeth_free_qdio_out_buf(struct qeth_qdio_out_q *q)
+static void qeth_free_output_queue(struct qeth_qdio_out_q *q)
 {
 	if (!q)
 		return;
 
+	qeth_clear_outq_buffers(q, 1);
 	qdio_free_buffers(q->qdio_bufs, QDIO_MAX_BUFFERS_PER_Q);
 	kfree(q);
 }
@@ -2475,10 +2476,8 @@ static int qeth_alloc_qdio_buffers(struct qeth_card *card)
 		card->qdio.out_qs[i]->bufs[j] = NULL;
 	}
 out_freeoutq:
-	while (i > 0) {
-		qeth_free_qdio_out_buf(card->qdio.out_qs[--i]);
-		qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
-	}
+	while (i > 0)
+		qeth_free_output_queue(card->qdio.out_qs[--i]);
 	kfree(card->qdio.out_qs);
 	card->qdio.out_qs = NULL;
 out_freepool:
@@ -2511,10 +2510,8 @@ static void qeth_free_qdio_buffers(struct qeth_card *card)
 	qeth_free_buffer_pool(card);
 	/* free outbound qdio_qs */
 	if (card->qdio.out_qs) {
-		for (i = 0; i < card->qdio.no_out_queues; ++i) {
-			qeth_clear_outq_buffers(card->qdio.out_qs[i], 1);
-			qeth_free_qdio_out_buf(card->qdio.out_qs[i]);
-		}
+		for (i = 0; i < card->qdio.no_out_queues; i++)
+			qeth_free_output_queue(card->qdio.out_qs[i]);
 		kfree(card->qdio.out_qs);
 		card->qdio.out_qs = NULL;
 	}
-- 
2.19.1

[PATCH 4.20 127/171] s390/qeth: cancel close_dev work before removing a card

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c2780c1a3fb724560b1d44f7976e0de17bf153c7 ]

A card's close_dev work is scheduled on a driver-wide workqueue. If the
card is removed and freed while the work is still active, this causes a
use-after-free.
So make sure that the work is completed before freeing the card.

Fixes: 0f54761d167f ("qeth: Support VEPA mode")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core.h    | 1 +
 drivers/s390/net/qeth_l2_main.c | 2 ++
 drivers/s390/net/qeth_l3_main.c | 1 +
 3 files changed, 4 insertions(+)

diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 99af1a0a3314..8999be74c545 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -22,6 +22,7 @@
 #include <linux/hashtable.h>
 #include <linux/ip.h>
 #include <linux/refcount.h>
+#include <linux/workqueue.h>
 
 #include <net/ipv6.h>
 #include <net/if_inet6.h>
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 8d3601891c62..49fa09c67d49 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -823,6 +823,8 @@ static void qeth_l2_remove_device(struct ccwgroup_device *cgdev)
 
 	if (cgdev->state == CCWGROUP_ONLINE)
 		qeth_l2_set_offline(cgdev);
+
+	cancel_work_sync(&card->close_dev_work);
 	if (qeth_netdev_is_registered(card->dev))
 		unregister_netdev(card->dev);
 }
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index f08b745c2007..d1bf55b5c8e1 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2428,6 +2428,7 @@ static void qeth_l3_remove_device(struct ccwgroup_device *cgdev)
 	if (cgdev->state == CCWGROUP_ONLINE)
 		qeth_l3_set_offline(cgdev);
 
+	cancel_work_sync(&card->close_dev_work);
 	if (qeth_netdev_is_registered(card->dev))
 		unregister_netdev(card->dev);
 	qeth_l3_clear_ip_htable(card, 0);
-- 
2.19.1

[PATCH 4.20 128/171] s390/qeth: conclude all event processing before offlining a card

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c0a2e4d10d9366ada133a8ae4ff2f32397f8b15b ]

Work for Bridgeport events is currently placed on a driver-wide
workqueue. If the card is removed and freed while any such work is still
active, this causes a use-after-free.
So put the events on a per-card queue, where we can control their
lifetime. As we also don't want stale events to last beyond an
offline & online cycle, flush this queue when setting the card offline.

Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core.h      |  2 +-
 drivers/s390/net/qeth_core_main.c | 10 ++++++++--
 drivers/s390/net/qeth_l2_main.c   |  6 ++++--
 drivers/s390/net/qeth_l3_main.c   |  2 ++
 4 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 8999be74c545..8f2af450152f 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -791,6 +791,7 @@ struct qeth_card {
 	struct qeth_seqno seqno;
 	struct qeth_card_options options;
 
+	struct workqueue_struct *event_wq;
 	wait_queue_head_t wait_q;
 	spinlock_t mclock;
 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
@@ -969,7 +970,6 @@ extern const struct attribute_group *qeth_osn_attr_groups[];
 extern const struct attribute_group qeth_device_attr_group;
 extern const struct attribute_group qeth_device_blkt_group;
 extern const struct device_type qeth_generic_devtype;
-extern struct workqueue_struct *qeth_wq;
 
 int qeth_card_hw_is_reachable(struct qeth_card *);
 const char *qeth_get_cardname_short(struct qeth_card *);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 89cc172820ca..ebbc3ad504f9 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -76,8 +76,7 @@ static void qeth_notify_skbs(struct qeth_qdio_out_q *queue,
 static void qeth_release_skbs(struct qeth_qdio_out_buffer *buf);
 static int qeth_init_qdio_out_buf(struct qeth_qdio_out_q *, int);
 
-struct workqueue_struct *qeth_wq;
-EXPORT_SYMBOL_GPL(qeth_wq);
+static struct workqueue_struct *qeth_wq;
 
 int qeth_card_hw_is_reachable(struct qeth_card *card)
 {
@@ -1471,6 +1470,10 @@ static struct qeth_card *qeth_alloc_card(struct ccwgroup_device *gdev)
 	CARD_RDEV(card) = gdev->cdev[0];
 	CARD_WDEV(card) = gdev->cdev[1];
 	CARD_DDEV(card) = gdev->cdev[2];
+
+	card->event_wq = alloc_ordered_workqueue("%s", 0, dev_name(&gdev->dev));
+	if (!card->event_wq)
+		goto out_wq;
 	if (qeth_setup_channel(&card->read, true))
 		goto out_ip;
 	if (qeth_setup_channel(&card->write, true))
@@ -1486,6 +1489,8 @@ static struct qeth_card *qeth_alloc_card(struct ccwgroup_device *gdev)
 out_channel:
 	qeth_clean_channel(&card->read);
 out_ip:
+	destroy_workqueue(card->event_wq);
+out_wq:
 	dev_set_drvdata(&gdev->dev, NULL);
 	kfree(card);
 out:
@@ -5038,6 +5043,7 @@ static void qeth_core_free_card(struct qeth_card *card)
 	qeth_clean_channel(&card->read);
 	qeth_clean_channel(&card->write);
 	qeth_clean_channel(&card->data);
+	destroy_workqueue(card->event_wq);
 	qeth_free_qdio_buffers(card);
 	unregister_service_level(&card->qeth_service_level);
 	dev_set_drvdata(&card->gdev->dev, NULL);
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 49fa09c67d49..a6c55cbf3d69 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -391,6 +391,8 @@ static void qeth_l2_stop_card(struct qeth_card *card, int recovery_mode)
 		qeth_clear_cmd_buffers(&card->read);
 		qeth_clear_cmd_buffers(&card->write);
 	}
+
+	flush_workqueue(card->event_wq);
 }
 
 static int qeth_l2_process_inbound_buffer(struct qeth_card *card,
@@ -1455,7 +1457,7 @@ static void qeth_bridge_state_change(struct qeth_card *card,
 	data->card = card;
 	memcpy(&data->qports, qports,
 			sizeof(struct qeth_sbp_state_change) + extrasize);
-	queue_work(qeth_wq, &data->worker);
+	queue_work(card->event_wq, &data->worker);
 }
 
 struct qeth_bridge_host_data {
@@ -1527,7 +1529,7 @@ static void qeth_bridge_host_event(struct qeth_card *card,
 	data->card = card;
 	memcpy(&data->hostevs, hostevs,
 			sizeof(struct qeth_ipacmd_addr_change) + extrasize);
-	queue_work(qeth_wq, &data->worker);
+	queue_work(card->event_wq, &data->worker);
 }
 
 /* SETBRIDGEPORT support; sending commands */
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index d1bf55b5c8e1..29a2408b9282 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1436,6 +1436,8 @@ static void qeth_l3_stop_card(struct qeth_card *card, int recovery_mode)
 		qeth_clear_cmd_buffers(&card->read);
 		qeth_clear_cmd_buffers(&card->write);
 	}
+
+	flush_workqueue(card->event_wq);
 }
 
 /*
-- 
2.19.1

[PATCH 4.20 129/171] perf symbols: Filter out hidden symbols from labels

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 59a17706915fe5ea6f711e1f92d4fb706bce07fe ]

When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:

  # nm perf | grep annobin | head -10
  0000000000241100 t .annobin_annotate.c
  0000000000326490 t .annobin_annotate.c
  0000000000249255 t .annobin_annotate.c_end
  00000000003283a8 t .annobin_annotate.c_end
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bce18 t .annobin_annotate.c_end.hot
  00000000001bc3e2 t .annobin_annotate.c_end.unlikely
  00000000001bc400 t .annobin_annotate.c_end.unlikely
  00000000001bce18 t .annobin_annotate.c.hot
  00000000001bce18 t .annobin_annotate.c.hot
  ...

Those symbols have no use for report or annotation and should be
skipped.  Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:

  # perf test dwarf -v
  59: Test dwarf unwind                                     :
  --- start ---
  test child forked, pid 8515
  unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
  ...
  got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
  unwind: failed with 'no error'

The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:

  # readelf -s ./perf | grep annobin | head -1
    40: 00000000001bce4f     0 NOTYPE  LOCAL  HIDDEN    13 .annobin_init.c

They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.

>   Just to be awkward, if you are going to ignore STV_HIDDEN
>   symbols then you should probably also ignore STV_INTERNAL ones
>   as well...  Annobin does not generate them, but you never know,
>   one day some other tool might create some.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/symbol-elf.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 66a84d5846c8..03cb8c6d620a 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -87,6 +87,11 @@ static inline uint8_t elf_sym__type(const GElf_Sym *sym)
 	return GELF_ST_TYPE(sym->st_info);
 }
 
+static inline uint8_t elf_sym__visibility(const GElf_Sym *sym)
+{
+	return GELF_ST_VISIBILITY(sym->st_other);
+}
+
 #ifndef STT_GNU_IFUNC
 #define STT_GNU_IFUNC 10
 #endif
@@ -111,7 +116,9 @@ static inline int elf_sym__is_label(const GElf_Sym *sym)
 	return elf_sym__type(sym) == STT_NOTYPE &&
 		sym->st_name != 0 &&
 		sym->st_shndx != SHN_UNDEF &&
-		sym->st_shndx != SHN_ABS;
+		sym->st_shndx != SHN_ABS &&
+		elf_sym__visibility(sym) != STV_HIDDEN &&
+		elf_sym__visibility(sym) != STV_INTERNAL;
 }
 
 static bool elf_sym__filter(GElf_Sym *sym)
-- 
2.19.1

[PATCH 4.20 130/171] perf trace: Support multiple "vfs_getname" probes

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6ab3bc240ade47a0f52bc16d97edd9accbe0024e ]

With a suitably defined "probe:vfs_getname" probe, 'perf trace' can
"beautify" its output, so syscalls like open() or openat() can print the
"filename" argument instead of just its hex address, like:

  $ perf trace -e open -- touch /dev/null
  [...]
       0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
  [...]

The output without such beautifier looks like:

     0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

However, when the vfs_getname probe expands to multiple probes and it is
not the first one that is hit, the beautifier fails, as following:

     0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3

Fix it by hooking into all the expanded probes (inlines), now, for instance:

  [root@quaco ~]# perf probe -l
    probe:vfs_getname    (on getname_flags:73@fs/namei.c with pathname)
    probe:vfs_getname_1  (on getname_flags:73@fs/namei.c with pathname)
  [root@quaco ~]# perf trace -e open* sleep 1
       0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC)   = 3
       0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC)   = 3
       0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3
  [root@quaco ~]#

Works, further verified with:

  [root@quaco ~]# perf test vfs
  65: Use vfs_getname probe to get syscall args filenames   : Ok
  66: Add vfs_getname probe to get syscall args filenames   : Ok
  67: Check open filename arg using perf trace + vfs_getname: Ok
  [root@quaco ~]#

Reported-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-trace.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 835619476370..c108519ddd61 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -2424,19 +2424,30 @@ static size_t trace__fprintf_thread_summary(struct trace *trace, FILE *fp);
 
 static bool perf_evlist__add_vfs_getname(struct perf_evlist *evlist)
 {
-	struct perf_evsel *evsel = perf_evsel__newtp("probe", "vfs_getname");
+	bool found = false;
+	struct perf_evsel *evsel, *tmp;
+	struct parse_events_error err = { .idx = 0, };
+	int ret = parse_events(evlist, "probe:vfs_getname*", &err);
 
-	if (IS_ERR(evsel))
+	if (ret)
 		return false;
 
-	if (perf_evsel__field(evsel, "pathname") == NULL) {
+	evlist__for_each_entry_safe(evlist, evsel, tmp) {
+		if (!strstarts(perf_evsel__name(evsel), "probe:vfs_getname"))
+			continue;
+
+		if (perf_evsel__field(evsel, "pathname")) {
+			evsel->handler = trace__vfs_getname;
+			found = true;
+			continue;
+		}
+
+		list_del_init(&evsel->node);
+		evsel->evlist = NULL;
 		perf_evsel__delete(evsel);
-		return false;
 	}
 
-	evsel->handler = trace__vfs_getname;
-	perf_evlist__add(evlist, evsel);
-	return true;
+	return found;
 }
 
 static struct perf_evsel *perf_evsel__new_pgfault(u64 config)
-- 
2.19.1

[PATCH 4.20 131/171] MIPS: Loongson: Introduce and use loongson_llsc_mb()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e02e07e3127d8aec1f4bcdfb2fc52a2d99b4859e ]

On the Loongson-2G/2H/3A/3B there is a hardware flaw that ll/sc and
lld/scd is very weak ordering. We should add sync instructions "before
each ll/lld" and "at the branch-target between ll/sc" to workaround.
Otherwise, this flaw will cause deadlock occasionally (e.g. when doing
heavy load test with LTP).

Below is the explaination of CPU designer:

"For Loongson 3 family, when a memory access instruction (load, store,
or prefetch)'s executing occurs between the execution of LL and SC, the
success or failure of SC is not predictable. Although programmer would
not insert memory access instructions between LL and SC, the memory
instructions before LL in program-order, may dynamically executed
between the execution of LL/SC, so a memory fence (SYNC) is needed
before LL/LLD to avoid this situation.

Since Loongson-3A R2 (3A2000), we have improved our hardware design to
handle this case. But we later deduce a rarely circumstance that some
speculatively executed memory instructions due to branch misprediction
between LL/SC still fall into the above case, so a memory fence (SYNC)
at branch-target (if its target is not between LL/SC) is needed for
Loongson 3A1000, 3B1500, 3A2000 and 3A3000.

Our processor is continually evolving and we aim to to remove all these
workaround-SYNCs around LL/SC for new-come processor."

Here is an example:

Both cpu1 and cpu2 simutaneously run atomic_add by 1 on same atomic var,
this bug cause both 'sc' run by two cpus (in atomic_add) succeed at same
time('sc' return 1), and the variable is only *added by 1*, sometimes,
which is wrong and unacceptable(it should be added by 2).

Why disable fix-loongson3-llsc in compiler?
Because compiler fix will cause problems in kernel's __ex_table section.

This patch fix all the cases in kernel, but:

+. the fix at the end of futex_atomic_cmpxchg_inatomic is for branch-target
of 'bne', there other cases which smp_mb__before_llsc() and smp_llsc_mb() fix
the ll and branch-target coincidently such as atomic_sub_if_positive/
cmpxchg/xchg, just like this one.

+. Loongson 3 does support CONFIG_EDAC_ATOMIC_SCRUB, so no need to touch
edac.h

+. local_ops and cmpxchg_local should not be affected by this bug since
only the owner can write.

+. mips_atomic_set for syscall.c is deprecated and rarely used, just let
it go

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huang Pei <huangpei@loongson.cn>
[paul.burton@mips.com:
  - Simplify the addition of -mno-fix-loongson3-llsc to cflags, and add
    a comment describing why it's there.
  - Make loongson_llsc_mb() a no-op when
    CONFIG_CPU_LOONGSON3_WORKAROUNDS=n, rather than a compiler memory
    barrier.
  - Add a comment describing the bug & how loongson_llsc_mb() helps
    in asm/barrier.h.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: ambrosehua@gmail.com
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Li Xuefeng <lixuefeng@loongson.cn>
Cc: Xu Chenghua <xuchenghua@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Kconfig               | 15 ++++++++++++++
 arch/mips/include/asm/atomic.h  |  6 ++++++
 arch/mips/include/asm/barrier.h | 36 +++++++++++++++++++++++++++++++++
 arch/mips/include/asm/bitops.h  |  5 +++++
 arch/mips/include/asm/futex.h   |  3 +++
 arch/mips/include/asm/pgtable.h |  2 ++
 arch/mips/loongson64/Platform   | 23 +++++++++++++++++++++
 arch/mips/mm/tlbex.c            | 10 +++++++++
 8 files changed, 100 insertions(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index bfb3d8451c0a..0fbd88489c04 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1400,6 +1400,21 @@ config LOONGSON3_ENHANCEMENT
 	  please say 'N' here. If you want a high-performance kernel to run on
 	  new Loongson 3 machines only, please say 'Y' here.
 
+config CPU_LOONGSON3_WORKAROUNDS
+	bool "Old Loongson 3 LLSC Workarounds"
+	default y if SMP
+	depends on CPU_LOONGSON3
+	help
+	  Loongson 3 processors have the llsc issues which require workarounds.
+	  Without workarounds the system may hang unexpectedly.
+
+	  Newer Loongson 3 will fix these issues and no workarounds are needed.
+	  The workarounds have no significant side effect on them but may
+	  decrease the performance of the system so this option should be
+	  disabled unless the kernel is intended to be run on old systems.
+
+	  If unsure, please say Y.
+
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 9e805317847d..1fc6f04e85a1 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -58,6 +58,7 @@ static __inline__ void atomic_##op(int i, atomic_t * v)			      \
 	if (kernel_uses_llsc) {						      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	ll	%0, %1		# atomic_" #op "	\n"   \
@@ -84,6 +85,7 @@ static __inline__ int atomic_##op##_return_relaxed(int i, atomic_t * v)	      \
 	if (kernel_uses_llsc) {						      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	ll	%1, %2		# atomic_" #op "_return	\n"   \
@@ -116,6 +118,7 @@ static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v)	      \
 	if (kernel_uses_llsc) {						      \
 		int temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	ll	%1, %2		# atomic_fetch_" #op "	\n"   \
@@ -251,6 +254,7 @@ static __inline__ void atomic64_##op(long i, atomic64_t * v)		      \
 	if (kernel_uses_llsc) {						      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	lld	%0, %1		# atomic64_" #op "	\n"   \
@@ -277,6 +281,7 @@ static __inline__ long atomic64_##op##_return_relaxed(long i, atomic64_t * v) \
 	if (kernel_uses_llsc) {						      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	lld	%1, %2		# atomic64_" #op "_return\n"  \
@@ -309,6 +314,7 @@ static __inline__ long atomic64_fetch_##op##_relaxed(long i, atomic64_t * v)  \
 	if (kernel_uses_llsc) {						      \
 		long temp;						      \
 									      \
+		loongson_llsc_mb();					      \
 		__asm__ __volatile__(					      \
 		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	lld	%1, %2		# atomic64_fetch_" #op "\n"   \
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index a5eb1bb199a7..b7f6ac5e513c 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -222,6 +222,42 @@
 #define __smp_mb__before_atomic()	__smp_mb__before_llsc()
 #define __smp_mb__after_atomic()	smp_llsc_mb()
 
+/*
+ * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load,
+ * store or pref) in between an ll & sc can cause the sc instruction to
+ * erroneously succeed, breaking atomicity. Whilst it's unusual to write code
+ * containing such sequences, this bug bites harder than we might otherwise
+ * expect due to reordering & speculation:
+ *
+ * 1) A memory access appearing prior to the ll in program order may actually
+ *    be executed after the ll - this is the reordering case.
+ *
+ *    In order to avoid this we need to place a memory barrier (ie. a sync
+ *    instruction) prior to every ll instruction, in between it & any earlier
+ *    memory access instructions. Many of these cases are already covered by
+ *    smp_mb__before_llsc() but for the remaining cases, typically ones in
+ *    which multiple CPUs may operate on a memory location but ordering is not
+ *    usually guaranteed, we use loongson_llsc_mb() below.
+ *
+ *    This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later.
+ *
+ * 2) If a conditional branch exists between an ll & sc with a target outside
+ *    of the ll-sc loop, for example an exit upon value mismatch in cmpxchg()
+ *    or similar, then misprediction of the branch may allow speculative
+ *    execution of memory accesses from outside of the ll-sc loop.
+ *
+ *    In order to avoid this we need a memory barrier (ie. a sync instruction)
+ *    at each affected branch target, for which we also use loongson_llsc_mb()
+ *    defined below.
+ *
+ *    This case affects all current Loongson 3 CPUs.
+ */
+#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS /* Loongson-3's LLSC workaround */
+#define loongson_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#else
+#define loongson_llsc_mb()	do { } while (0)
+#endif
+
 #include <asm-generic/barrier.h>
 
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index da1b8718861e..2a40ecd69ac4 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -68,6 +68,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		: "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m));
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	" __LL "%0, %1		# set_bit	\n"
@@ -78,6 +79,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
@@ -120,6 +122,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		: "ir" (~(1UL << bit)));
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	" __LL "%0, %1		# clear_bit	\n"
@@ -130,6 +133,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		} while (unlikely(!temp));
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 	} else if (kernel_uses_llsc) {
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
@@ -188,6 +192,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
+		loongson_llsc_mb();
 		do {
 			__asm__ __volatile__(
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h
index a9e61ea54ca9..0a62a91b592d 100644
--- a/arch/mips/include/asm/futex.h
+++ b/arch/mips/include/asm/futex.h
@@ -50,6 +50,7 @@
 		  "i" (-EFAULT)						\
 		: "memory");						\
 	} else if (cpu_has_llsc) {					\
+		loongson_llsc_mb();					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
@@ -162,6 +163,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		  "i" (-EFAULT)
 		: "memory");
 	} else if (cpu_has_llsc) {
+		loongson_llsc_mb();
 		__asm__ __volatile__(
 		"# futex_atomic_cmpxchg_inatomic			\n"
 		"	.set	push					\n"
@@ -190,6 +192,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		: GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval),
 		  "i" (-EFAULT)
 		: "memory");
+		loongson_llsc_mb();
 	} else
 		return -ENOSYS;
 
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 129e0328367f..6a35bbf46b93 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -229,6 +229,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 			: [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp)
 			: [global] "r" (page_global));
 		} else if (kernel_uses_llsc) {
+			loongson_llsc_mb();
 			__asm__ __volatile__ (
 			"	.set	"MIPS_ISA_ARCH_LEVEL"		\n"
 			"	.set	push				\n"
@@ -244,6 +245,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
 			"	.set	mips0				\n"
 			: [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp)
 			: [global] "r" (page_global));
+			loongson_llsc_mb();
 		}
 #else /* !CONFIG_SMP */
 		if (pte_none(*buddy))
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 0fce4608aa88..c1a4d4dc4665 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -23,6 +23,29 @@ ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
 endif
 
 cflags-$(CONFIG_CPU_LOONGSON3)	+= -Wa,--trap
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see loongson_llsc_mb() in asm/barrier.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON3)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
+
 #
 # binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
 # as MIPS64 R2; older versions as just R1.  This leaves the possibility open
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 067714291643..64db0400a8be 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -931,6 +931,8 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		 * to mimic that here by taking a load/istream page
 		 * fault.
 		 */
+		if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+			uasm_i_sync(p, 0);
 		UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
 		uasm_i_jr(p, ptr);
 
@@ -1645,6 +1647,8 @@ static void
 iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr)
 {
 #ifdef CONFIG_SMP
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(p, 0);
 # ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (cpu_has_64bits)
 		uasm_i_lld(p, pte, 0, ptr);
@@ -2258,6 +2262,8 @@ static void build_r4000_tlb_load_handler(void)
 #endif
 
 	uasm_l_nopage_tlbl(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_0 & 1) {
@@ -2312,6 +2318,8 @@ static void build_r4000_tlb_store_handler(void)
 #endif
 
 	uasm_l_nopage_tlbs(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_1 & 1) {
@@ -2367,6 +2375,8 @@ static void build_r4000_tlb_modify_handler(void)
 #endif
 
 	uasm_l_nopage_tlbm(&l, p);
+	if (IS_ENABLED(CONFIG_CPU_LOONGSON3_WORKAROUNDS))
+		uasm_i_sync(&p, 0);
 	build_restore_work_registers(&p);
 #ifdef CONFIG_CPU_MICROMIPS
 	if ((unsigned long)tlb_do_page_fault_1 & 1) {
-- 
2.19.1

[PATCH 4.20 132/171] MIPS: Remove function size check in get_frame_info()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2b424cfc69728224fcb5fad138ea7260728e0901 ]

Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.

This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.

Signed-off-by: Jun-Ru Chang <jrjang@realtek.com>
Signed-off-by: Tony Wu <tonywu@realtek.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <macro@mips.com>
Cc: <yamada.masahiro@socionext.com>
Cc: <peterz@infradead.org>
Cc: <mingo@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/process.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index d4f7fd4550e1..85522c137f19 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -371,7 +371,7 @@ static inline int is_sp_move_ins(union mips_instruction *ip, int *frame_size)
 static int get_frame_info(struct mips_frame_info *info)
 {
 	bool is_mmips = IS_ENABLED(CONFIG_CPU_MICROMIPS);
-	union mips_instruction insn, *ip, *ip_end;
+	union mips_instruction insn, *ip;
 	const unsigned int max_insns = 128;
 	unsigned int last_insn_size = 0;
 	unsigned int i;
@@ -384,10 +384,9 @@ static int get_frame_info(struct mips_frame_info *info)
 	if (!ip)
 		goto err;
 
-	ip_end = (void *)ip + info->func_size;
-
-	for (i = 0; i < max_insns && ip < ip_end; i++) {
+	for (i = 0; i < max_insns; i++) {
 		ip = (void *)ip + last_insn_size;
+
 		if (is_mmips && mm_insn_16bit(ip->halfword[0])) {
 			insn.word = ip->halfword[0] << 16;
 			last_insn_size = 2;
-- 
2.19.1

[PATCH 4.20 133/171] Revert "scsi: libfc: Add WARN_ON() when deleting rports"

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit d8f6382a7d026989029e2e50c515df954488459b ]

This reverts commit bbc0f8bd88abefb0f27998f40a073634a3a2db89.

It added a warning whose intent was to check whether the rport was still
linked into the peer list. It doesn't work as intended and gives false
positive warnings for two reasons:

1) If the rport is never linked into the peer list it will not be
considered empty since the list_head is never initialized.

2) If the rport is deleted from the peer list using list_del_rcu(), then
the list_head is in an undefined state and it is not considered empty.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_rport.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 1e1c0f1b9e69..8ed2113f5a1e 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -184,7 +184,6 @@ void fc_rport_destroy(struct kref *kref)
 	struct fc_rport_priv *rdata;
 
 	rdata = container_of(kref, struct fc_rport_priv, kref);
-	WARN_ON(!list_empty(&rdata->peers));
 	kfree_rcu(rdata, rcu);
 }
 EXPORT_SYMBOL(fc_rport_destroy);
-- 
2.19.1

[PATCH 4.20 134/171] i2c: omap: Use noirq system sleep pm ops to idle device for suspend

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c6e2bd956936d925748581e4d0294f10f1d92f2c ]

We currently get the following error with pixcir_ts driver during a
suspend resume cycle:

omap_i2c 4802a000.i2c: controller timed out
pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110
pixcir_ts 1-005c: Failed to disable interrupt generation: -110
pixcir_ts 1-005c: Failed to stop
dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98
[pixcir_i2c_ts] returns -110
PM: Device 1-005c failed to resume: error -110

And at least am437x based devices with pixcir_ts will fail to resume
to a touchscreen that is configured as the wakeup-source in device
tree for these devices.

This is because pixcir_ts tries to reconfigure it's registers for
noirq suspend which fails. This also leaves i2c-omap in enabled state
for suspend.

Let's fix the pixcir_ts issue and make sure i2c-omap is suspended by
adding SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.

Let's also get rid of some ifdefs while at it and replace them with
__maybe_unused as SET_RUNTIME_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
already deal with the various PM Kconfig options.

Reported-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-omap.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b1086bfb0465..cd9c65f3d404 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1500,8 +1500,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int omap_i2c_runtime_suspend(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_suspend(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1527,7 +1526,7 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int omap_i2c_runtime_resume(struct device *dev)
+static int __maybe_unused omap_i2c_runtime_resume(struct device *dev)
 {
 	struct omap_i2c_dev *omap = dev_get_drvdata(dev);
 
@@ -1542,20 +1541,18 @@ static int omap_i2c_runtime_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops omap_i2c_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
 			   omap_i2c_runtime_resume, NULL)
 };
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif /* CONFIG_PM */
 
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
 	.remove		= omap_i2c_remove,
 	.driver		= {
 		.name	= "omap_i2c",
-		.pm	= OMAP_I2C_PM_OPS,
+		.pm	= &omap_i2c_pm_ops,
 		.of_match_table = of_match_ptr(omap_i2c_of_match),
 	},
 };
-- 
2.19.1

[PATCH 4.20 135/171] drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 0a5f49cbf9d6ad3721c16f8a6d823363ea7a160f ]

amdgpu_vm_get_task_info is called from interrupt handler and sched timeout
workqueue, we should use irq version spin_lock to avoid deadlock.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index 62df4bd0a0fc..16c83155ef5c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -3405,14 +3405,15 @@ void amdgpu_vm_get_task_info(struct amdgpu_device *adev, unsigned int pasid,
 			 struct amdgpu_task_info *task_info)
 {
 	struct amdgpu_vm *vm;
+	unsigned long flags;
 
-	spin_lock(&adev->vm_manager.pasid_lock);
+	spin_lock_irqsave(&adev->vm_manager.pasid_lock, flags);
 
 	vm = idr_find(&adev->vm_manager.pasid_idr, pasid);
 	if (vm)
 		*task_info = vm->task_info;
 
-	spin_unlock(&adev->vm_manager.pasid_lock);
+	spin_unlock_irqrestore(&adev->vm_manager.pasid_lock, flags);
 }
 
 /**
-- 
2.19.1

[PATCH 4.20 136/171] drm/omap: dsi: Fix crash in DSI debug dumps

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4df04ac9b37f278c48bb696289aff8f81226af4b ]

Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.

Fixes: f3ed97f9ae7d ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/omapdrm/dss/dsi.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 00a9c2ab9e6c..277f9dd2ec8c 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -1406,7 +1406,7 @@ static void dsi_pll_disable(struct dss_pll *pll)
 
 static int dsi_dump_dsi_clocks(struct seq_file *s, void *p)
 {
-	struct dsi_data *dsi = p;
+	struct dsi_data *dsi = s->private;
 	struct dss_pll_clock_info *cinfo = &dsi->pll.cinfo;
 	enum dss_clk_source dispc_clk_src, dsi_clk_src;
 	int dsi_module = dsi->module_id;
@@ -1467,7 +1467,7 @@ static int dsi_dump_dsi_clocks(struct seq_file *s, void *p)
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
 static int dsi_dump_dsi_irqs(struct seq_file *s, void *p)
 {
-	struct dsi_data *dsi = p;
+	struct dsi_data *dsi = s->private;
 	unsigned long flags;
 	struct dsi_irq_stats stats;
 
@@ -1558,7 +1558,7 @@ static int dsi_dump_dsi_irqs(struct seq_file *s, void *p)
 
 static int dsi_dump_dsi_regs(struct seq_file *s, void *p)
 {
-	struct dsi_data *dsi = p;
+	struct dsi_data *dsi = s->private;
 
 	if (dsi_runtime_get(dsi))
 		return 0;
@@ -5083,15 +5083,15 @@ static int dsi_bind(struct device *dev, struct device *master, void *data)
 
 	snprintf(name, sizeof(name), "dsi%u_regs", dsi->module_id + 1);
 	dsi->debugfs.regs = dss_debugfs_create_file(dss, name,
-						    dsi_dump_dsi_regs, &dsi);
+						    dsi_dump_dsi_regs, dsi);
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
 	snprintf(name, sizeof(name), "dsi%u_irqs", dsi->module_id + 1);
 	dsi->debugfs.irqs = dss_debugfs_create_file(dss, name,
-						    dsi_dump_dsi_irqs, &dsi);
+						    dsi_dump_dsi_irqs, dsi);
 #endif
 	snprintf(name, sizeof(name), "dsi%u_clks", dsi->module_id + 1);
 	dsi->debugfs.clks = dss_debugfs_create_file(dss, name,
-						    dsi_dump_dsi_clocks, &dsi);
+						    dsi_dump_dsi_clocks, dsi);
 
 	return 0;
 }
-- 
2.19.1

[PATCH 4.20 137/171] drm/omap: dsi: Fix OF platform depopulate

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 0940c52742de0d2f70ba687bfd5fe8aa38c5f27d ]

Commit edb715dffdee ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.

Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/omapdrm/dss/dsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 277f9dd2ec8c..b5685018d830 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -5104,8 +5104,6 @@ static void dsi_unbind(struct device *dev, struct device *master, void *data)
 	dss_debugfs_remove_file(dsi->debugfs.irqs);
 	dss_debugfs_remove_file(dsi->debugfs.regs);
 
-	of_platform_depopulate(dev);
-
 	WARN_ON(dsi->scp_clk_refcount > 0);
 
 	dss_pll_unregister(&dsi->pll);
@@ -5457,6 +5455,8 @@ static int dsi_remove(struct platform_device *pdev)
 
 	dsi_uninit_output(dsi);
 
+	of_platform_depopulate(&pdev->dev);
+
 	pm_runtime_disable(&pdev->dev);
 
 	if (dsi->vdds_dsi_reg != NULL && dsi->vdds_dsi_enabled) {
-- 
2.19.1

[PATCH 4.20 138/171] drm/omap: dsi: Hack-fix DSI bus flags

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6297388e1eddd2f1345cea5892156223995bcf2d ]

Since commit b4935e3a3cfa ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.

To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.

Fixes: b4935e3a3cfa ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/omapdrm/dss/dsi.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index b5685018d830..64fb788b6647 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -4751,6 +4751,17 @@ static int dsi_set_config(struct omap_dss_device *dssdev,
 	dsi->vm.flags |= DISPLAY_FLAGS_HSYNC_HIGH;
 	dsi->vm.flags &= ~DISPLAY_FLAGS_VSYNC_LOW;
 	dsi->vm.flags |= DISPLAY_FLAGS_VSYNC_HIGH;
+	/*
+	 * HACK: These flags should be handled through the omap_dss_device bus
+	 * flags, but this will only be possible when the DSI encoder will be
+	 * converted to the omapdrm-managed encoder model.
+	 */
+	dsi->vm.flags &= ~DISPLAY_FLAGS_PIXDATA_NEGEDGE;
+	dsi->vm.flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE;
+	dsi->vm.flags &= ~DISPLAY_FLAGS_DE_LOW;
+	dsi->vm.flags |= DISPLAY_FLAGS_DE_HIGH;
+	dsi->vm.flags &= ~DISPLAY_FLAGS_SYNC_POSEDGE;
+	dsi->vm.flags |= DISPLAY_FLAGS_SYNC_NEGEDGE;
 
 	dss_mgr_set_timings(&dsi->output, &dsi->vm);
 
-- 
2.19.1

[PATCH 4.20 139/171] nvme: lock NS list changes while handling command effects

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e7ad43c3eda6a1690c4c3c341f95dc1c6898da83 ]

If a controller supports the NS Change Notification, the namespace
scan_work is automatically triggered after attaching a new namespace.

Occasionally the namespace scan_work may append the new namespace to the
list before the admin command effects handling is completed. The effects
handling unfreezes namespaces, but if it unfreezes the newly attached
namespace, its request_queue freeze depth will be off and we'll hit the
warning in blk_mq_unfreeze_queue().

On the next namespace add, we will fail to freeze that queue due to the
previous bad accounting and deadlock waiting for frozen.

Fix that by preventing scan work from altering the namespace list while
command effects handling needs to pair freeze with unfreeze.

Reported-by: Wen Xiong <wenxiong@us.ibm.com>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 8 +++++++-
 drivers/nvme/host/nvme.h | 1 +
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 5f9a5ef93969..21d7b646c73d 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1182,6 +1182,7 @@ static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 	 * effects say only one namespace is affected.
 	 */
 	if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) {
+		mutex_lock(&ctrl->scan_lock);
 		nvme_start_freeze(ctrl);
 		nvme_wait_freeze(ctrl);
 	}
@@ -1210,8 +1211,10 @@ static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects)
 	 */
 	if (effects & NVME_CMD_EFFECTS_LBCC)
 		nvme_update_formats(ctrl);
-	if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK))
+	if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) {
 		nvme_unfreeze(ctrl);
+		mutex_unlock(&ctrl->scan_lock);
+	}
 	if (effects & NVME_CMD_EFFECTS_CCC)
 		nvme_init_identify(ctrl);
 	if (effects & (NVME_CMD_EFFECTS_NIC | NVME_CMD_EFFECTS_NCC))
@@ -3300,6 +3303,7 @@ static void nvme_scan_work(struct work_struct *work)
 	if (nvme_identify_ctrl(ctrl, &id))
 		return;
 
+	mutex_lock(&ctrl->scan_lock);
 	nn = le32_to_cpu(id->nn);
 	if (ctrl->vs >= NVME_VS(1, 1, 0) &&
 	    !(ctrl->quirks & NVME_QUIRK_IDENTIFY_CNS)) {
@@ -3308,6 +3312,7 @@ static void nvme_scan_work(struct work_struct *work)
 	}
 	nvme_scan_ns_sequential(ctrl, nn);
 out_free_id:
+	mutex_unlock(&ctrl->scan_lock);
 	kfree(id);
 	down_write(&ctrl->namespaces_rwsem);
 	list_sort(NULL, &ctrl->namespaces, ns_cmp);
@@ -3550,6 +3555,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,
 
 	ctrl->state = NVME_CTRL_NEW;
 	spin_lock_init(&ctrl->lock);
+	mutex_init(&ctrl->scan_lock);
 	INIT_LIST_HEAD(&ctrl->namespaces);
 	init_rwsem(&ctrl->namespaces_rwsem);
 	ctrl->dev = dev;
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 6ffa99a10a60..5274881f9141 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -153,6 +153,7 @@ struct nvme_ctrl {
 	enum nvme_ctrl_state state;
 	bool identified;
 	spinlock_t lock;
+	struct mutex scan_lock;
 	const struct nvme_ctrl_ops *ops;
 	struct request_queue *admin_q;
 	struct request_queue *connect_q;
-- 
2.19.1

[PATCH 4.20 140/171] nvme-pci: fix rapid add remove sequence

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 5c959d73dba6495ec01d04c206ee679d61ccb2b0 ]

A surprise removal may fail to tear down request queues if it is racing
with the initial asynchronous probe. If that happens, the remove path
won't see the queue resources to tear down, and the controller reset
path may create a new request queue on a removed device, but will not
be able to make forward progress, deadlocking the pci removal.

Protect setting up non-blocking resources from a shutdown by holding the
same mutex, and transition to the CONNECTING state after these resources
are initialized so the probe path may see the dead controller state
before dispatching new IO.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202081
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index c0d01048ce4d..439b9f4eb246 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2280,16 +2280,7 @@ static void nvme_reset_work(struct work_struct *work)
 	if (dev->ctrl.ctrl_config & NVME_CC_ENABLE)
 		nvme_dev_disable(dev, false);
 
-	/*
-	 * Introduce CONNECTING state from nvme-fc/rdma transports to mark the
-	 * initializing procedure here.
-	 */
-	if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_CONNECTING)) {
-		dev_warn(dev->ctrl.device,
-			"failed to mark controller CONNECTING\n");
-		goto out;
-	}
-
+	mutex_lock(&dev->shutdown_lock);
 	result = nvme_pci_enable(dev);
 	if (result)
 		goto out;
@@ -2308,6 +2299,17 @@ static void nvme_reset_work(struct work_struct *work)
 	 */
 	dev->ctrl.max_hw_sectors = NVME_MAX_KB_SZ << 1;
 	dev->ctrl.max_segments = NVME_MAX_SEGS;
+	mutex_unlock(&dev->shutdown_lock);
+
+	/*
+	 * Introduce CONNECTING state from nvme-fc/rdma transports to mark the
+	 * initializing procedure here.
+	 */
+	if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_CONNECTING)) {
+		dev_warn(dev->ctrl.device,
+			"failed to mark controller CONNECTING\n");
+		goto out;
+	}
 
 	result = nvme_init_identify(&dev->ctrl);
 	if (result)
-- 
2.19.1

[PATCH 4.20 141/171] fs: ratelimit __find_get_block_slow() failure message.

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 43636c804df0126da669c261fc820fb22f62bfc2 ]

When something let __find_get_block_slow() hit all_mapped path, it calls
printk() for 100+ times per a second. But there is no need to print same
message with such high frequency; it is just asking for stall warning, or
at least bloating log files.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.873324][T15342] b_state=0x00000029, b_size=512
  [  399.878403][T15342] device loop0 blocksize: 4096
  [  399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.890400][T15342] b_state=0x00000029, b_size=512
  [  399.895595][T15342] device loop0 blocksize: 4096
  [  399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.907471][T15342] b_state=0x00000029, b_size=512
  [  399.912506][T15342] device loop0 blocksize: 4096

This patch reduces frequency to up to once per a second, in addition to
concatenating three lines into one.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/buffer.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index 1286c2b95498..72e33ffa00ff 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -200,6 +200,7 @@ __find_get_block_slow(struct block_device *bdev, sector_t block)
 	struct buffer_head *head;
 	struct page *page;
 	int all_mapped = 1;
+	static DEFINE_RATELIMIT_STATE(last_warned, HZ, 1);
 
 	index = block >> (PAGE_SHIFT - bd_inode->i_blkbits);
 	page = find_get_page_flags(bd_mapping, index, FGP_ACCESSED);
@@ -227,15 +228,15 @@ __find_get_block_slow(struct block_device *bdev, sector_t block)
 	 * file io on the block device and getblk.  It gets dealt with
 	 * elsewhere, don't buffer_error if we had some unmapped buffers
 	 */
-	if (all_mapped) {
-		printk("__find_get_block_slow() failed. "
-			"block=%llu, b_blocknr=%llu\n",
-			(unsigned long long)block,
-			(unsigned long long)bh->b_blocknr);
-		printk("b_state=0x%08lx, b_size=%zu\n",
-			bh->b_state, bh->b_size);
-		printk("device %pg blocksize: %d\n", bdev,
-			1 << bd_inode->i_blkbits);
+	ratelimit_set_flags(&last_warned, RATELIMIT_MSG_ON_RELEASE);
+	if (all_mapped && __ratelimit(&last_warned)) {
+		printk("__find_get_block_slow() failed. block=%llu, "
+		       "b_blocknr=%llu, b_state=0x%08lx, b_size=%zu, "
+		       "device %pg blocksize: %d\n",
+		       (unsigned long long)block,
+		       (unsigned long long)bh->b_blocknr,
+		       bh->b_state, bh->b_size, bdev,
+		       1 << bd_inode->i_blkbits);
 	}
 out_unlock:
 	spin_unlock(&bd_mapping->private_lock);
-- 
2.19.1

[PATCH 4.20 142/171] qed: Fix EQ full firmware assert.

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 660492bcf4a7561b5fdc13be0ae0b0c0a8c120be ]

When slowpath messages are sent with high rate, the resulting
events can lead to a FW assert in case they are not handled fast
enough (Event Queue Full assert). Attempt to send queued slowpath
messages only after the newly evacuated entries in the EQ ring
are indicated to FW.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_sp.h  |  1 +
 drivers/net/ethernet/qlogic/qed/qed_spq.c | 15 +++++++--------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp.h b/drivers/net/ethernet/qlogic/qed/qed_sp.h
index 3157c0d99441..dae2896e1d8e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp.h
@@ -380,6 +380,7 @@ void qed_consq_setup(struct qed_hwfn *p_hwfn);
  * @param p_hwfn
  */
 void qed_consq_free(struct qed_hwfn *p_hwfn);
+int qed_spq_pend_post(struct qed_hwfn *p_hwfn);
 
 /**
  * @file
diff --git a/drivers/net/ethernet/qlogic/qed/qed_spq.c b/drivers/net/ethernet/qlogic/qed/qed_spq.c
index 0a9c5bb0fa48..a721b9348b6c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_spq.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_spq.c
@@ -402,6 +402,11 @@ int qed_eq_completion(struct qed_hwfn *p_hwfn, void *cookie)
 
 	qed_eq_prod_update(p_hwfn, qed_chain_get_prod_idx(p_chain));
 
+	/* Attempt to post pending requests */
+	spin_lock_bh(&p_hwfn->p_spq->lock);
+	rc = qed_spq_pend_post(p_hwfn);
+	spin_unlock_bh(&p_hwfn->p_spq->lock);
+
 	return rc;
 }
 
@@ -744,7 +749,7 @@ static int qed_spq_post_list(struct qed_hwfn *p_hwfn,
 	return 0;
 }
 
-static int qed_spq_pend_post(struct qed_hwfn *p_hwfn)
+int qed_spq_pend_post(struct qed_hwfn *p_hwfn)
 {
 	struct qed_spq *p_spq = p_hwfn->p_spq;
 	struct qed_spq_entry *p_ent = NULL;
@@ -882,7 +887,6 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
 	struct qed_spq_entry	*p_ent = NULL;
 	struct qed_spq_entry	*tmp;
 	struct qed_spq_entry	*found = NULL;
-	int			rc;
 
 	if (!p_hwfn)
 		return -EINVAL;
@@ -940,12 +944,7 @@ int qed_spq_completion(struct qed_hwfn *p_hwfn,
 		 */
 		qed_spq_return_entry(p_hwfn, found);
 
-	/* Attempt to post pending requests */
-	spin_lock_bh(&p_spq->lock);
-	rc = qed_spq_pend_post(p_hwfn);
-	spin_unlock_bh(&p_spq->lock);
-
-	return rc;
+	return 0;
 }
 
 int qed_consq_alloc(struct qed_hwfn *p_hwfn)
-- 
2.19.1

[PATCH 4.20 143/171] qed: Consider TX tcs while deriving the max num_queues for PF.

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit fb1faab74ddef9ec2d841d54e5d0912a097b3abe ]

Max supported queues is derived incorrectly in the case of multi-CoS.
Need to consider TCs while calculating num_queues for PF.

Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index e68ca83ae915..64ac95ca4df2 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -2216,7 +2216,7 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev,
 			u16 num_queues = 0;
 
 			/* Since the feature controls only queue-zones,
-			 * make sure we have the contexts [rx, tx, xdp] to
+			 * make sure we have the contexts [rx, xdp, tcs] to
 			 * match.
 			 */
 			for_each_hwfn(cdev, i) {
@@ -2226,7 +2226,8 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev,
 				u16 cids;
 
 				cids = hwfn->pf_params.eth_pf_params.num_cons;
-				num_queues += min_t(u16, l2_queues, cids / 3);
+				cids /= (2 + info->num_tc);
+				num_queues += min_t(u16, l2_queues, cids);
 			}
 
 			/* queues might theoretically be >256, but interrupts'
-- 
2.19.1

[PATCH 4.20 144/171] qede: Fix system crash on configuring channels.

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 0aa4febb420d91df5b56b1864a2465765da85f4b ]

Under heavy traffic load, when changing number of channels via
ethtool (ethtool -L) which will cause interface to be reloaded,
it was observed that some packets gets transmitted on old TX
channel/queue id which doesn't really exist after the channel
configuration leads to system crash.

Add a safeguard in the driver by validating queue id through
ndo_select_queue() which is called before the ndo_start_xmit().

Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede.h      |  3 +++
 drivers/net/ethernet/qlogic/qede/qede_fp.c   | 13 +++++++++++++
 drivers/net/ethernet/qlogic/qede/qede_main.c |  3 +++
 3 files changed, 19 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index de98a974673b..4b875f652ecd 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -489,6 +489,9 @@ struct qede_reload_args {
 
 /* Datapath functions definition */
 netdev_tx_t qede_start_xmit(struct sk_buff *skb, struct net_device *ndev);
+u16 qede_select_queue(struct net_device *dev, struct sk_buff *skb,
+		      struct net_device *sb_dev,
+		      select_queue_fallback_t fallback);
 netdev_features_t qede_features_check(struct sk_buff *skb,
 				      struct net_device *dev,
 				      netdev_features_t features);
diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c
index 1a78027de071..a96da16f3404 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -1695,6 +1695,19 @@ netdev_tx_t qede_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	return NETDEV_TX_OK;
 }
 
+u16 qede_select_queue(struct net_device *dev, struct sk_buff *skb,
+		      struct net_device *sb_dev,
+		      select_queue_fallback_t fallback)
+{
+	struct qede_dev *edev = netdev_priv(dev);
+	int total_txq;
+
+	total_txq = QEDE_TSS_COUNT(edev) * edev->dev_info.num_tc;
+
+	return QEDE_TSS_COUNT(edev) ?
+		fallback(dev, skb, NULL) % total_txq :  0;
+}
+
 /* 8B udp header + 8B base tunnel header + 32B option length */
 #define QEDE_MAX_TUN_HDR_LEN 48
 
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 46d0f2eaa0c0..f3d9c40c4115 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -631,6 +631,7 @@ static const struct net_device_ops qede_netdev_ops = {
 	.ndo_open = qede_open,
 	.ndo_stop = qede_close,
 	.ndo_start_xmit = qede_start_xmit,
+	.ndo_select_queue = qede_select_queue,
 	.ndo_set_rx_mode = qede_set_rx_mode,
 	.ndo_set_mac_address = qede_set_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,
@@ -666,6 +667,7 @@ static const struct net_device_ops qede_netdev_vf_ops = {
 	.ndo_open = qede_open,
 	.ndo_stop = qede_close,
 	.ndo_start_xmit = qede_start_xmit,
+	.ndo_select_queue = qede_select_queue,
 	.ndo_set_rx_mode = qede_set_rx_mode,
 	.ndo_set_mac_address = qede_set_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,
@@ -684,6 +686,7 @@ static const struct net_device_ops qede_netdev_vf_xdp_ops = {
 	.ndo_open = qede_open,
 	.ndo_stop = qede_close,
 	.ndo_start_xmit = qede_start_xmit,
+	.ndo_select_queue = qede_select_queue,
 	.ndo_set_rx_mode = qede_set_rx_mode,
 	.ndo_set_mac_address = qede_set_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,
-- 
2.19.1

[PATCH 4.20 145/171] blk-iolatency: fix IO hang due to negative inflight counter

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8c772a9bfc7c07c76f4a58b58910452fbb20843b ]

Our test reported the following stack, and vmcore showed that
->inflight counter is -1.

[ffffc9003fcc38d0] __schedule at ffffffff8173d95d
[ffffc9003fcc3958] schedule at ffffffff8173de26
[ffffc9003fcc3970] io_schedule at ffffffff810bb6b6
[ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb
[ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3
[ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a
[ffffc9003fcc3b08] generic_make_request at ffffffff81368b49
[ffffc9003fcc3b68] submit_bio at ffffffff81368d7d
[ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4]
[ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4]
[ffffc9003fcc3d68] do_writepages at ffffffff811c49ae
[ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188
[ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301
[ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4]
[ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b
[ffffc9003fcc3ee8] do_fsync at ffffffff81285abd
[ffffc9003fcc3f18] sys_fsync at ffffffff81285d50
[ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04
[ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e

The ->inflight counter may be negative (-1) if

1) blk-iolatency was disabled when the IO was issued,

2) blk-iolatency was enabled before this IO reached its endio,

3) the ->inflight counter is decreased from 0 to -1 in endio()

In fact the hang can be easily reproduced by the below script,

H=/sys/fs/cgroup/unified/
P=/sys/fs/cgroup/unified/test

echo "+io" > $H/cgroup.subtree_control
mkdir -p $P

echo $$ > $P/cgroup.procs

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

This fixes the problem by freezing the queue so that while
enabling/disabling iolatency, there is no inflight rq running.

Note that quiesce_queue is not needed as this only updating iolatency
configuration about which dispatching request_queue doesn't care.

Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-iolatency.c | 52 +++++++++++++++++++++++++++++++++++++------
 1 file changed, 45 insertions(+), 7 deletions(-)

diff --git a/block/blk-iolatency.c b/block/blk-iolatency.c
index 38c35c32aff2..c1c72b42dda0 100644
--- a/block/blk-iolatency.c
+++ b/block/blk-iolatency.c
@@ -72,6 +72,7 @@
 #include <linux/sched/loadavg.h>
 #include <linux/sched/signal.h>
 #include <trace/events/block.h>
+#include <linux/blk-mq.h>
 #include "blk-rq-qos.h"
 #include "blk-stat.h"
 
@@ -648,6 +649,9 @@ static void blkcg_iolatency_done_bio(struct rq_qos *rqos, struct bio *bio)
 		return;
 
 	enabled = blk_iolatency_enabled(iolat->blkiolat);
+	if (!enabled)
+		return;
+
 	while (blkg && blkg->parent) {
 		iolat = blkg_to_lat(blkg);
 		if (!iolat) {
@@ -657,7 +661,7 @@ static void blkcg_iolatency_done_bio(struct rq_qos *rqos, struct bio *bio)
 		rqw = &iolat->rq_wait;
 
 		atomic_dec(&rqw->inflight);
-		if (!enabled || iolat->min_lat_nsec == 0)
+		if (iolat->min_lat_nsec == 0)
 			goto next;
 		iolatency_record_time(iolat, &bio->bi_issue, now,
 				      issue_as_root);
@@ -801,10 +805,13 @@ int blk_iolatency_init(struct request_queue *q)
 	return 0;
 }
 
-static void iolatency_set_min_lat_nsec(struct blkcg_gq *blkg, u64 val)
+/*
+ * return 1 for enabling iolatency, return -1 for disabling iolatency, otherwise
+ * return 0.
+ */
+static int iolatency_set_min_lat_nsec(struct blkcg_gq *blkg, u64 val)
 {
 	struct iolatency_grp *iolat = blkg_to_lat(blkg);
-	struct blk_iolatency *blkiolat = iolat->blkiolat;
 	u64 oldval = iolat->min_lat_nsec;
 
 	iolat->min_lat_nsec = val;
@@ -813,9 +820,10 @@ static void iolatency_set_min_lat_nsec(struct blkcg_gq *blkg, u64 val)
 				    BLKIOLATENCY_MAX_WIN_SIZE);
 
 	if (!oldval && val)
-		atomic_inc(&blkiolat->enabled);
+		return 1;
 	if (oldval && !val)
-		atomic_dec(&blkiolat->enabled);
+		return -1;
+	return 0;
 }
 
 static void iolatency_clear_scaling(struct blkcg_gq *blkg)
@@ -847,6 +855,7 @@ static ssize_t iolatency_set_limit(struct kernfs_open_file *of, char *buf,
 	u64 lat_val = 0;
 	u64 oldval;
 	int ret;
+	int enable = 0;
 
 	ret = blkg_conf_prep(blkcg, &blkcg_policy_iolatency, buf, &ctx);
 	if (ret)
@@ -881,7 +890,12 @@ static ssize_t iolatency_set_limit(struct kernfs_open_file *of, char *buf,
 	blkg = ctx.blkg;
 	oldval = iolat->min_lat_nsec;
 
-	iolatency_set_min_lat_nsec(blkg, lat_val);
+	enable = iolatency_set_min_lat_nsec(blkg, lat_val);
+	if (enable) {
+		WARN_ON_ONCE(!blk_get_queue(blkg->q));
+		blkg_get(blkg);
+	}
+
 	if (oldval != iolat->min_lat_nsec) {
 		iolatency_clear_scaling(blkg);
 	}
@@ -889,6 +903,24 @@ static ssize_t iolatency_set_limit(struct kernfs_open_file *of, char *buf,
 	ret = 0;
 out:
 	blkg_conf_finish(&ctx);
+	if (ret == 0 && enable) {
+		struct iolatency_grp *tmp = blkg_to_lat(blkg);
+		struct blk_iolatency *blkiolat = tmp->blkiolat;
+
+		blk_mq_freeze_queue(blkg->q);
+
+		if (enable == 1)
+			atomic_inc(&blkiolat->enabled);
+		else if (enable == -1)
+			atomic_dec(&blkiolat->enabled);
+		else
+			WARN_ON_ONCE(1);
+
+		blk_mq_unfreeze_queue(blkg->q);
+
+		blkg_put(blkg);
+		blk_put_queue(blkg->q);
+	}
 	return ret ?: nbytes;
 }
 
@@ -1024,8 +1056,14 @@ static void iolatency_pd_offline(struct blkg_policy_data *pd)
 {
 	struct iolatency_grp *iolat = pd_to_lat(pd);
 	struct blkcg_gq *blkg = lat_to_blkg(iolat);
+	struct blk_iolatency *blkiolat = iolat->blkiolat;
+	int ret;
 
-	iolatency_set_min_lat_nsec(blkg, 0);
+	ret = iolatency_set_min_lat_nsec(blkg, 0);
+	if (ret == 1)
+		atomic_inc(&blkiolat->enabled);
+	if (ret == -1)
+		atomic_dec(&blkiolat->enabled);
 	iolatency_clear_scaling(blkg);
 }
 
-- 
2.19.1

[PATCH 4.20 146/171] nvme-pci: add missing unlock for reset error

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4726bcf30fad37cc555cd9dcd6c73f2b2668c879 ]

The reset work holds a mutex to prevent races with removal modifying the
same resources, but was unlocking only on success. Unlock on failure
too.

Fixes: 5c959d73dba64 ("nvme-pci: fix rapid add remove sequence")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 439b9f4eb246..5c58e0ffa3ac 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2283,15 +2283,15 @@ static void nvme_reset_work(struct work_struct *work)
 	mutex_lock(&dev->shutdown_lock);
 	result = nvme_pci_enable(dev);
 	if (result)
-		goto out;
+		goto out_unlock;
 
 	result = nvme_pci_configure_admin_queue(dev);
 	if (result)
-		goto out;
+		goto out_unlock;
 
 	result = nvme_alloc_admin_tags(dev);
 	if (result)
-		goto out;
+		goto out_unlock;
 
 	/*
 	 * Limit the max command size to prevent iod->sg allocations going
@@ -2374,6 +2374,8 @@ static void nvme_reset_work(struct work_struct *work)
 	nvme_start_ctrl(&dev->ctrl);
 	return;
 
+ out_unlock:
+	mutex_unlock(&dev->shutdown_lock);
  out:
 	nvme_remove_dead_ctrl(dev, result);
 }
-- 
2.19.1

[PATCH 4.20 147/171] netfilter: nf_tables: unbind set in rule from commit path

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f6ac8585897684374a19863fff21186a05805286 ]

Anonymous sets that are bound to rules from the same transaction trigger
a kernel splat from the abort path due to double set list removal and
double free.

This patch updates the logic to search for the transaction that is
responsible for creating the set and disable the set list removal and
release, given the rule is now responsible for this. Lookup is reverse
since the transaction that adds the set is likely to be at the tail of
the list.

Moreover, this patch adds the unbind step to deliver the event from the
commit path.  This should not be done from the worker thread, since we
have no guarantees of in-order delivery to the listener.

This patch removes the assumption that both activate and deactivate
callbacks need to be provided.

Fixes: cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase")
Reported-by: Mikhail Morfikov <mmorfikov@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_tables.h | 17 +++++--
 net/netfilter/nf_tables_api.c     | 85 +++++++++++++++----------------
 net/netfilter/nft_compat.c        |  6 ++-
 net/netfilter/nft_dynset.c        | 18 +++----
 net/netfilter/nft_immediate.c     |  6 ++-
 net/netfilter/nft_lookup.c        | 18 +++----
 net/netfilter/nft_objref.c        | 18 +++----
 7 files changed, 85 insertions(+), 83 deletions(-)

diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index 841835a387e1..b4984bbbe157 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -469,9 +469,7 @@ struct nft_set_binding {
 int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set,
 		       struct nft_set_binding *binding);
 void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
-			  struct nft_set_binding *binding);
-void nf_tables_rebind_set(const struct nft_ctx *ctx, struct nft_set *set,
-			  struct nft_set_binding *binding);
+			  struct nft_set_binding *binding, bool commit);
 void nf_tables_destroy_set(const struct nft_ctx *ctx, struct nft_set *set);
 
 /**
@@ -721,6 +719,13 @@ struct nft_expr_type {
 #define NFT_EXPR_STATEFUL		0x1
 #define NFT_EXPR_GC			0x2
 
+enum nft_trans_phase {
+	NFT_TRANS_PREPARE,
+	NFT_TRANS_ABORT,
+	NFT_TRANS_COMMIT,
+	NFT_TRANS_RELEASE
+};
+
 /**
  *	struct nft_expr_ops - nf_tables expression operations
  *
@@ -750,7 +755,8 @@ struct nft_expr_ops {
 	void				(*activate)(const struct nft_ctx *ctx,
 						    const struct nft_expr *expr);
 	void				(*deactivate)(const struct nft_ctx *ctx,
-						      const struct nft_expr *expr);
+						      const struct nft_expr *expr,
+						      enum nft_trans_phase phase);
 	void				(*destroy)(const struct nft_ctx *ctx,
 						   const struct nft_expr *expr);
 	void				(*destroy_clone)(const struct nft_ctx *ctx,
@@ -1323,12 +1329,15 @@ struct nft_trans_rule {
 struct nft_trans_set {
 	struct nft_set			*set;
 	u32				set_id;
+	bool				bound;
 };
 
 #define nft_trans_set(trans)	\
 	(((struct nft_trans_set *)trans->data)->set)
 #define nft_trans_set_id(trans)	\
 	(((struct nft_trans_set *)trans->data)->set_id)
+#define nft_trans_set_bound(trans)	\
+	(((struct nft_trans_set *)trans->data)->bound)
 
 struct nft_trans_chain {
 	bool				update;
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 5114a0d2a41e..36d4717fee3b 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -116,6 +116,23 @@ static void nft_trans_destroy(struct nft_trans *trans)
 	kfree(trans);
 }
 
+static void nft_set_trans_bind(const struct nft_ctx *ctx, struct nft_set *set)
+{
+	struct net *net = ctx->net;
+	struct nft_trans *trans;
+
+	if (!nft_set_is_anonymous(set))
+		return;
+
+	list_for_each_entry_reverse(trans, &net->nft.commit_list, list) {
+		if (trans->msg_type == NFT_MSG_NEWSET &&
+		    nft_trans_set(trans) == set) {
+			nft_trans_set_bound(trans) = true;
+			break;
+		}
+	}
+}
+
 static int nf_tables_register_hook(struct net *net,
 				   const struct nft_table *table,
 				   struct nft_chain *chain)
@@ -211,18 +228,6 @@ static int nft_delchain(struct nft_ctx *ctx)
 	return err;
 }
 
-/* either expr ops provide both activate/deactivate, or neither */
-static bool nft_expr_check_ops(const struct nft_expr_ops *ops)
-{
-	if (!ops)
-		return true;
-
-	if (WARN_ON_ONCE((!ops->activate ^ !ops->deactivate)))
-		return false;
-
-	return true;
-}
-
 static void nft_rule_expr_activate(const struct nft_ctx *ctx,
 				   struct nft_rule *rule)
 {
@@ -238,14 +243,15 @@ static void nft_rule_expr_activate(const struct nft_ctx *ctx,
 }
 
 static void nft_rule_expr_deactivate(const struct nft_ctx *ctx,
-				     struct nft_rule *rule)
+				     struct nft_rule *rule,
+				     enum nft_trans_phase phase)
 {
 	struct nft_expr *expr;
 
 	expr = nft_expr_first(rule);
 	while (expr != nft_expr_last(rule) && expr->ops) {
 		if (expr->ops->deactivate)
-			expr->ops->deactivate(ctx, expr);
+			expr->ops->deactivate(ctx, expr, phase);
 
 		expr = nft_expr_next(expr);
 	}
@@ -296,7 +302,7 @@ static int nft_delrule(struct nft_ctx *ctx, struct nft_rule *rule)
 		nft_trans_destroy(trans);
 		return err;
 	}
-	nft_rule_expr_deactivate(ctx, rule);
+	nft_rule_expr_deactivate(ctx, rule, NFT_TRANS_PREPARE);
 
 	return 0;
 }
@@ -1932,9 +1938,6 @@ static int nf_tables_delchain(struct net *net, struct sock *nlsk,
  */
 int nft_register_expr(struct nft_expr_type *type)
 {
-	if (!nft_expr_check_ops(type->ops))
-		return -EINVAL;
-
 	nfnl_lock(NFNL_SUBSYS_NFTABLES);
 	if (type->family == NFPROTO_UNSPEC)
 		list_add_tail_rcu(&type->list, &nf_tables_expressions);
@@ -2082,10 +2085,6 @@ static int nf_tables_expr_parse(const struct nft_ctx *ctx,
 			err = PTR_ERR(ops);
 			goto err1;
 		}
-		if (!nft_expr_check_ops(ops)) {
-			err = -EINVAL;
-			goto err1;
-		}
 	} else
 		ops = type->ops;
 
@@ -2482,7 +2481,7 @@ static void nf_tables_rule_destroy(const struct nft_ctx *ctx,
 static void nf_tables_rule_release(const struct nft_ctx *ctx,
 				   struct nft_rule *rule)
 {
-	nft_rule_expr_deactivate(ctx, rule);
+	nft_rule_expr_deactivate(ctx, rule, NFT_TRANS_RELEASE);
 	nf_tables_rule_destroy(ctx, rule);
 }
 
@@ -3679,39 +3678,30 @@ int nf_tables_bind_set(const struct nft_ctx *ctx, struct nft_set *set,
 bind:
 	binding->chain = ctx->chain;
 	list_add_tail_rcu(&binding->list, &set->bindings);
+	nft_set_trans_bind(ctx, set);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(nf_tables_bind_set);
 
-void nf_tables_rebind_set(const struct nft_ctx *ctx, struct nft_set *set,
-			  struct nft_set_binding *binding)
-{
-	if (list_empty(&set->bindings) && nft_set_is_anonymous(set) &&
-	    nft_is_active(ctx->net, set))
-		list_add_tail_rcu(&set->list, &ctx->table->sets);
-
-	list_add_tail_rcu(&binding->list, &set->bindings);
-}
-EXPORT_SYMBOL_GPL(nf_tables_rebind_set);
-
 void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set,
-		          struct nft_set_binding *binding)
+			  struct nft_set_binding *binding, bool event)
 {
 	list_del_rcu(&binding->list);
 
-	if (list_empty(&set->bindings) && nft_set_is_anonymous(set) &&
-	    nft_is_active(ctx->net, set))
+	if (list_empty(&set->bindings) && nft_set_is_anonymous(set)) {
 		list_del_rcu(&set->list);
+		if (event)
+			nf_tables_set_notify(ctx, set, NFT_MSG_DELSET,
+					     GFP_KERNEL);
+	}
 }
 EXPORT_SYMBOL_GPL(nf_tables_unbind_set);
 
 void nf_tables_destroy_set(const struct nft_ctx *ctx, struct nft_set *set)
 {
-	if (list_empty(&set->bindings) && nft_set_is_anonymous(set) &&
-	    nft_is_active(ctx->net, set)) {
-		nf_tables_set_notify(ctx, set, NFT_MSG_DELSET, GFP_ATOMIC);
+	if (list_empty(&set->bindings) && nft_set_is_anonymous(set))
 		nft_set_destroy(set);
-	}
 }
 EXPORT_SYMBOL_GPL(nf_tables_destroy_set);
 
@@ -6504,6 +6494,9 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb)
 			nf_tables_rule_notify(&trans->ctx,
 					      nft_trans_rule(trans),
 					      NFT_MSG_DELRULE);
+			nft_rule_expr_deactivate(&trans->ctx,
+						 nft_trans_rule(trans),
+						 NFT_TRANS_COMMIT);
 			break;
 		case NFT_MSG_NEWSET:
 			nft_clear(net, nft_trans_set(trans));
@@ -6590,7 +6583,8 @@ static void nf_tables_abort_release(struct nft_trans *trans)
 		nf_tables_rule_destroy(&trans->ctx, nft_trans_rule(trans));
 		break;
 	case NFT_MSG_NEWSET:
-		nft_set_destroy(nft_trans_set(trans));
+		if (!nft_trans_set_bound(trans))
+			nft_set_destroy(nft_trans_set(trans));
 		break;
 	case NFT_MSG_NEWSETELEM:
 		nft_set_elem_destroy(nft_trans_elem_set(trans),
@@ -6651,7 +6645,9 @@ static int __nf_tables_abort(struct net *net)
 		case NFT_MSG_NEWRULE:
 			trans->ctx.chain->use--;
 			list_del_rcu(&nft_trans_rule(trans)->list);
-			nft_rule_expr_deactivate(&trans->ctx, nft_trans_rule(trans));
+			nft_rule_expr_deactivate(&trans->ctx,
+						 nft_trans_rule(trans),
+						 NFT_TRANS_ABORT);
 			break;
 		case NFT_MSG_DELRULE:
 			trans->ctx.chain->use++;
@@ -6661,7 +6657,8 @@ static int __nf_tables_abort(struct net *net)
 			break;
 		case NFT_MSG_NEWSET:
 			trans->ctx.table->use--;
-			list_del_rcu(&nft_trans_set(trans)->list);
+			if (!nft_trans_set_bound(trans))
+				list_del_rcu(&nft_trans_set(trans)->list);
 			break;
 		case NFT_MSG_DELSET:
 			trans->ctx.table->use++;
diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index a354e9771697..5fd94f7fdb94 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -588,10 +588,14 @@ static void nft_compat_activate_tg(const struct nft_ctx *ctx,
 }
 
 static void nft_compat_deactivate(const struct nft_ctx *ctx,
-				  const struct nft_expr *expr)
+				  const struct nft_expr *expr,
+				  enum nft_trans_phase phase)
 {
 	struct nft_xt *xt = container_of(expr->ops, struct nft_xt, ops);
 
+	if (phase == NFT_TRANS_COMMIT)
+		return;
+
 	if (--xt->listcnt == 0)
 		list_del_init(&xt->head);
 }
diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c
index 07d4efd3d851..f1172f99752b 100644
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -235,20 +235,17 @@ static int nft_dynset_init(const struct nft_ctx *ctx,
 	return err;
 }
 
-static void nft_dynset_activate(const struct nft_ctx *ctx,
-				const struct nft_expr *expr)
-{
-	struct nft_dynset *priv = nft_expr_priv(expr);
-
-	nf_tables_rebind_set(ctx, priv->set, &priv->binding);
-}
-
 static void nft_dynset_deactivate(const struct nft_ctx *ctx,
-				  const struct nft_expr *expr)
+				  const struct nft_expr *expr,
+				  enum nft_trans_phase phase)
 {
 	struct nft_dynset *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+	if (phase == NFT_TRANS_PREPARE)
+		return;
+
+	nf_tables_unbind_set(ctx, priv->set, &priv->binding,
+			     phase == NFT_TRANS_COMMIT);
 }
 
 static void nft_dynset_destroy(const struct nft_ctx *ctx,
@@ -296,7 +293,6 @@ static const struct nft_expr_ops nft_dynset_ops = {
 	.eval		= nft_dynset_eval,
 	.init		= nft_dynset_init,
 	.destroy	= nft_dynset_destroy,
-	.activate	= nft_dynset_activate,
 	.deactivate	= nft_dynset_deactivate,
 	.dump		= nft_dynset_dump,
 };
diff --git a/net/netfilter/nft_immediate.c b/net/netfilter/nft_immediate.c
index 0777a93211e2..3f6d1d2a6281 100644
--- a/net/netfilter/nft_immediate.c
+++ b/net/netfilter/nft_immediate.c
@@ -72,10 +72,14 @@ static void nft_immediate_activate(const struct nft_ctx *ctx,
 }
 
 static void nft_immediate_deactivate(const struct nft_ctx *ctx,
-				     const struct nft_expr *expr)
+				     const struct nft_expr *expr,
+				     enum nft_trans_phase phase)
 {
 	const struct nft_immediate_expr *priv = nft_expr_priv(expr);
 
+	if (phase == NFT_TRANS_COMMIT)
+		return;
+
 	return nft_data_release(&priv->data, nft_dreg_to_type(priv->dreg));
 }
 
diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c
index 227b2b15a19c..14496da5141d 100644
--- a/net/netfilter/nft_lookup.c
+++ b/net/netfilter/nft_lookup.c
@@ -121,20 +121,17 @@ static int nft_lookup_init(const struct nft_ctx *ctx,
 	return 0;
 }
 
-static void nft_lookup_activate(const struct nft_ctx *ctx,
-				const struct nft_expr *expr)
-{
-	struct nft_lookup *priv = nft_expr_priv(expr);
-
-	nf_tables_rebind_set(ctx, priv->set, &priv->binding);
-}
-
 static void nft_lookup_deactivate(const struct nft_ctx *ctx,
-				  const struct nft_expr *expr)
+				  const struct nft_expr *expr,
+				  enum nft_trans_phase phase)
 {
 	struct nft_lookup *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+	if (phase == NFT_TRANS_PREPARE)
+		return;
+
+	nf_tables_unbind_set(ctx, priv->set, &priv->binding,
+			     phase == NFT_TRANS_COMMIT);
 }
 
 static void nft_lookup_destroy(const struct nft_ctx *ctx,
@@ -225,7 +222,6 @@ static const struct nft_expr_ops nft_lookup_ops = {
 	.size		= NFT_EXPR_SIZE(sizeof(struct nft_lookup)),
 	.eval		= nft_lookup_eval,
 	.init		= nft_lookup_init,
-	.activate	= nft_lookup_activate,
 	.deactivate	= nft_lookup_deactivate,
 	.destroy	= nft_lookup_destroy,
 	.dump		= nft_lookup_dump,
diff --git a/net/netfilter/nft_objref.c b/net/netfilter/nft_objref.c
index a3185ca2a3a9..ae178e914486 100644
--- a/net/netfilter/nft_objref.c
+++ b/net/netfilter/nft_objref.c
@@ -155,20 +155,17 @@ static int nft_objref_map_dump(struct sk_buff *skb, const struct nft_expr *expr)
 	return -1;
 }
 
-static void nft_objref_map_activate(const struct nft_ctx *ctx,
-				    const struct nft_expr *expr)
-{
-	struct nft_objref_map *priv = nft_expr_priv(expr);
-
-	nf_tables_rebind_set(ctx, priv->set, &priv->binding);
-}
-
 static void nft_objref_map_deactivate(const struct nft_ctx *ctx,
-				      const struct nft_expr *expr)
+				      const struct nft_expr *expr,
+				      enum nft_trans_phase phase)
 {
 	struct nft_objref_map *priv = nft_expr_priv(expr);
 
-	nf_tables_unbind_set(ctx, priv->set, &priv->binding);
+	if (phase == NFT_TRANS_PREPARE)
+		return;
+
+	nf_tables_unbind_set(ctx, priv->set, &priv->binding,
+			     phase == NFT_TRANS_COMMIT);
 }
 
 static void nft_objref_map_destroy(const struct nft_ctx *ctx,
@@ -185,7 +182,6 @@ static const struct nft_expr_ops nft_objref_map_ops = {
 	.size		= NFT_EXPR_SIZE(sizeof(struct nft_objref_map)),
 	.eval		= nft_objref_map_eval,
 	.init		= nft_objref_map_init,
-	.activate	= nft_objref_map_activate,
 	.deactivate	= nft_objref_map_deactivate,
 	.destroy	= nft_objref_map_destroy,
 	.dump		= nft_objref_map_dump,
-- 
2.19.1

[PATCH 4.20 148/171] netfilter: nft_compat: dont use refcount_inc on newly allocated entry

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 947e492c0fc2132ae5fca081a9c2952ccaab0404 ]

When I moved the refcount to refcount_t type I missed the fact that
refcount_inc() will result in use-after-free warning with
CONFIG_REFCOUNT_FULL=y builds.

The correct fix would be to init the reference count to 1 at allocation
time, but, unfortunately we cannot do this, as we can't undo that
in case something else fails later in the batch.

So only solution I see is to special-case the 'new entry' condition
and replace refcount_inc() with a "delayed" refcount_set(1) in this case,
as done here.

The .activate callback can be removed to simplify things, we only
need to make sure that deactivate() decrements/unlinks the entry
from the list at end of transaction phase (commit or abort).

Fixes: 12c44aba6618 ("netfilter: nft_compat: use refcnt_t type for nft_xt reference count")
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_compat.c | 62 ++++++++++++++------------------------
 1 file changed, 23 insertions(+), 39 deletions(-)

diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index 5fd94f7fdb94..0a4bad55a8aa 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -61,6 +61,21 @@ static struct nft_compat_net *nft_compat_pernet(struct net *net)
 	return net_generic(net, nft_compat_net_id);
 }
 
+static void nft_xt_get(struct nft_xt *xt)
+{
+	/* refcount_inc() warns on 0 -> 1 transition, but we can't
+	 * init the reference count to 1 in .select_ops -- we can't
+	 * undo such an increase when another expression inside the same
+	 * rule fails afterwards.
+	 */
+	if (xt->listcnt == 0)
+		refcount_set(&xt->refcnt, 1);
+	else
+		refcount_inc(&xt->refcnt);
+
+	xt->listcnt++;
+}
+
 static bool nft_xt_put(struct nft_xt *xt)
 {
 	if (refcount_dec_and_test(&xt->refcnt)) {
@@ -291,7 +306,7 @@ nft_target_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		return -EINVAL;
 
 	nft_xt = container_of(expr->ops, struct nft_xt, ops);
-	refcount_inc(&nft_xt->refcnt);
+	nft_xt_get(nft_xt);
 	return 0;
 }
 
@@ -505,7 +520,7 @@ __nft_match_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		return ret;
 
 	nft_xt = container_of(expr->ops, struct nft_xt, ops);
-	refcount_inc(&nft_xt->refcnt);
+	nft_xt_get(nft_xt);
 	return 0;
 }
 
@@ -559,45 +574,16 @@ nft_match_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr)
 	__nft_match_destroy(ctx, expr, nft_expr_priv(expr));
 }
 
-static void nft_compat_activate(const struct nft_ctx *ctx,
-				const struct nft_expr *expr,
-				struct list_head *h)
-{
-	struct nft_xt *xt = container_of(expr->ops, struct nft_xt, ops);
-
-	if (xt->listcnt == 0)
-		list_add(&xt->head, h);
-
-	xt->listcnt++;
-}
-
-static void nft_compat_activate_mt(const struct nft_ctx *ctx,
-				   const struct nft_expr *expr)
-{
-	struct nft_compat_net *cn = nft_compat_pernet(ctx->net);
-
-	nft_compat_activate(ctx, expr, &cn->nft_match_list);
-}
-
-static void nft_compat_activate_tg(const struct nft_ctx *ctx,
-				   const struct nft_expr *expr)
-{
-	struct nft_compat_net *cn = nft_compat_pernet(ctx->net);
-
-	nft_compat_activate(ctx, expr, &cn->nft_target_list);
-}
-
 static void nft_compat_deactivate(const struct nft_ctx *ctx,
 				  const struct nft_expr *expr,
 				  enum nft_trans_phase phase)
 {
 	struct nft_xt *xt = container_of(expr->ops, struct nft_xt, ops);
 
-	if (phase == NFT_TRANS_COMMIT)
-		return;
-
-	if (--xt->listcnt == 0)
-		list_del_init(&xt->head);
+	if (phase == NFT_TRANS_ABORT || phase == NFT_TRANS_COMMIT) {
+		if (--xt->listcnt == 0)
+			list_del_init(&xt->head);
+	}
 }
 
 static void
@@ -853,7 +839,6 @@ nft_match_select_ops(const struct nft_ctx *ctx,
 	nft_match->ops.eval = nft_match_eval;
 	nft_match->ops.init = nft_match_init;
 	nft_match->ops.destroy = nft_match_destroy;
-	nft_match->ops.activate = nft_compat_activate_mt;
 	nft_match->ops.deactivate = nft_compat_deactivate;
 	nft_match->ops.dump = nft_match_dump;
 	nft_match->ops.validate = nft_match_validate;
@@ -871,7 +856,7 @@ nft_match_select_ops(const struct nft_ctx *ctx,
 
 	nft_match->ops.size = matchsize;
 
-	nft_match->listcnt = 1;
+	nft_match->listcnt = 0;
 	list_add(&nft_match->head, &cn->nft_match_list);
 
 	return &nft_match->ops;
@@ -958,7 +943,6 @@ nft_target_select_ops(const struct nft_ctx *ctx,
 	nft_target->ops.size = NFT_EXPR_SIZE(XT_ALIGN(target->targetsize));
 	nft_target->ops.init = nft_target_init;
 	nft_target->ops.destroy = nft_target_destroy;
-	nft_target->ops.activate = nft_compat_activate_tg;
 	nft_target->ops.deactivate = nft_compat_deactivate;
 	nft_target->ops.dump = nft_target_dump;
 	nft_target->ops.validate = nft_target_validate;
@@ -969,7 +953,7 @@ nft_target_select_ops(const struct nft_ctx *ctx,
 	else
 		nft_target->ops.eval = nft_target_eval_xt;
 
-	nft_target->listcnt = 1;
+	nft_target->listcnt = 0;
 	list_add(&nft_target->head, &cn->nft_target_list);
 
 	return &nft_target->ops;
-- 
2.19.1

[PATCH 4.20 149/171] Input: wacom_serial4 - add support for Wacom ArtPad II tablet

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Gerecke <jason.gerecke@wacom.com>

commit 44fc95e218a09d7966a9d448941fdb003f6bb69f upstream.

Tablet initially begins communicating at 9600 baud, so this command
should be used to connect to the device:

    $ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0

https://github.com/linuxwacom/xf86-input-wacom/issues/40

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/tablet/wacom_serial4.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/input/tablet/wacom_serial4.c
+++ b/drivers/input/tablet/wacom_serial4.c
@@ -187,6 +187,7 @@ enum {
 	MODEL_DIGITIZER_II	= 0x5544, /* UD */
 	MODEL_GRAPHIRE		= 0x4554, /* ET */
 	MODEL_PENPARTNER	= 0x4354, /* CT */
+	MODEL_ARTPAD_II		= 0x4B54, /* KT */
 };
 
 static void wacom_handle_model_response(struct wacom *wacom)
@@ -245,6 +246,7 @@ static void wacom_handle_model_response(
 		wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
 		break;
 
+	case MODEL_ARTPAD_II:
 	case MODEL_DIGITIZER_II:
 		wacom->dev->name = "Wacom Digitizer II";
 		wacom->dev->id.version = MODEL_DIGITIZER_II;

[PATCH 4.20 150/171] Input: elan_i2c - add id for touchpad found in Lenovo s21e-20

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vincent Batts <vbatts@hashbangbash.com>

commit e154ab69321ce2c54f19863d75c77b4e2dc9d365 upstream.

Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad.

Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/mouse/elan_i2c_core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1337,6 +1337,7 @@ static const struct acpi_device_id elan_
 	{ "ELAN0000", 0 },
 	{ "ELAN0100", 0 },
 	{ "ELAN0600", 0 },
+	{ "ELAN0601", 0 },
 	{ "ELAN0602", 0 },
 	{ "ELAN0605", 0 },
 	{ "ELAN0608", 0 },

[PATCH 4.20 151/171] iscsi_ibft: Fix missing break in switch statement

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit df997abeebadaa4824271009e2d2b526a70a11cb upstream.

Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firmware/iscsi_ibft.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -542,6 +542,7 @@ static umode_t __init ibft_check_tgt_for
 	case ISCSI_BOOT_TGT_NIC_ASSOC:
 	case ISCSI_BOOT_TGT_CHAP_TYPE:
 		rc = S_IRUGO;
+		break;
 	case ISCSI_BOOT_TGT_NAME:
 		if (tgt->tgt_name_len)
 			rc = S_IRUGO;

[PATCH 4.20 152/171] scsi: aacraid: Fix missing break in switch statement

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 5e420fe635813e5746b296cfc8fff4853ae205a2 upstream.

Add missing break statement and fix identation issue.

This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.

Fixes: 9cb62fa24e0d ("aacraid: Log firmware AIF messages")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/aacraid/commsup.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1304,8 +1304,9 @@ static void aac_handle_aif(struct aac_de
 				  ADD : DELETE;
 				break;
 			}
-			case AifBuManagerEvent:
-				aac_handle_aif_bu(dev, aifcmd);
+			break;
+		case AifBuManagerEvent:
+			aac_handle_aif_bu(dev, aifcmd);
 			break;
 		}
 

[PATCH 4.20 153/171] x86/PCI: Fixup RTIT_BAR of Intel Denverton Trace Hub

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Shishkin <alexander.shishkin@linux.intel.com>

commit 2e095ce7b6ecce2f3e2ff330527f12056ed1e1a1 upstream.

On Denverton's integration of the Intel(R) Trace Hub (for a reference and
overview see Documentation/trace/intel_th.rst) the reported size of one of
its resources (RTIT_BAR) doesn't match its actual size, which leads to
overlaps with other devices' resources.

In practice, it overlaps with XHCI MMIO space, which results in the xhci
driver bailing out after seeing its registers as 0xffffffff, and perceived
disappearance of all USB devices:

  intel_th_pci 0000:00:1f.7: enabling device (0004 -> 0006)
  xhci_hcd 0000:00:15.0: xHCI host controller not responding, assume dead
  xhci_hcd 0000:00:15.0: xHC not responding in xhci_irq, assume controller is dead
  xhci_hcd 0000:00:15.0: HC died; cleaning up
  usb 1-1: USB disconnect, device number 2

For this reason, we need to resize the RTIT_BAR on Denverton to its actual
size, which in this case is 4MB.  The corresponding erratum is DNV36 at the
link below:

  DNV36.       Processor Host Root Complex May Incorrectly Route Memory
               Accesses to Intel® Trace Hub

  Problem:     The Intel® Trace Hub RTIT_BAR (B0:D31:F7 offset 20h) is
	       reported as a 2KB memory range.  Due to this erratum, the
	       processor Host Root Complex will forward addresses from
	       RTIT_BAR to RTIT_BAR + 4MB -1 to Intel® Trace Hub.

  Implication: Devices assigned within the RTIT_BAR to RTIT_BAR + 4MB -1
               space may not function correctly.

  Workaround:  A BIOS code change has been identified and may be
               implemented as a workaround for this erratum.

  Status:      No Fix.

Note that 5118ccd34780 ("intel_th: pci: Add Denverton SOC support") updates
the Trace Hub driver so it claims the Denverton device, but the resource
overlap exists regardless of whether that driver is loaded or that commit
is included.

Link: https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/atom-c3000-family-spec-update.pdf
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[bhelgaas: include erratum text, clarify relationship with 5118ccd34780]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/pci/fixup.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -635,6 +635,22 @@ static void quirk_no_aersid(struct pci_d
 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
 			      PCI_CLASS_BRIDGE_PCI, 8, quirk_no_aersid);
 
+static void quirk_intel_th_dnv(struct pci_dev *dev)
+{
+	struct resource *r = &dev->resource[4];
+
+	/*
+	 * Denverton reports 2k of RTIT_BAR (intel_th resource 4), which
+	 * appears to be 4 MB in reality.
+	 */
+	if (r->end == r->start + 0x7ff) {
+		r->start = 0;
+		r->end   = 0x3fffff;
+		r->flags |= IORESOURCE_UNSET;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x19e1, quirk_intel_th_dnv);
+
 #ifdef CONFIG_PHYS_ADDR_T_64BIT
 
 #define AMD_141b_MMIO_BASE(x)	(0x80 + (x) * 0x8)

[PATCH 4.20 154/171] arm64: dts: zcu100-revC: Give wifi some time after power-on

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kiszka <jan.kiszka@siemens.com>

commit 35a4f89cd4731ac6ec985cd29ddc1630903006b7 upstream.

Somewhere along recent changes to power control of the wl1831, power-on
became very unreliable on the Ultra96, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms,
Ultra96 is already happy with 10 ms.

Fixes: 5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -101,6 +101,7 @@
 	sdio_pwrseq: sdio_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		post-power-on-delay-ms = <10>;
 	};
 };
 

[PATCH 4.20 155/171] arm64: dts: hikey: Give wifi some time after power-on

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kiszka <jan.kiszka@siemens.com>

commit 83b944174ad79825ae84a47af1a0354485b24602 upstream.

Somewhere along recent changes to power control of the wl1835, power-on
became very unreliable on the hikey, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms, the
hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
like on the Ultra96.

Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
Cc: <stable@vger.kernel.org> #4.12+
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -118,6 +118,7 @@
 		reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 		clocks = <&pmic>;
 		clock-names = "ext_clock";
+		post-power-on-delay-ms = <10>;
 		power-off-delay-us = <10>;
 	};
 

[PATCH 4.20 156/171] arm64: dts: hikey: Revert "Enable HS200 mode on eMMC"

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alistair Strachan <astrachan@google.com>

commit 8d26c1390aec795d492b8de5e4437751e8805a1d upstream.

This reverts commit abd7d0972a192ee653efc7b151a6af69db58f2bb. This
change was already partially reverted by John Stultz in
commit 9c6d26df1fae ("arm64: dts: hikey: Fix eMMC corruption regression").

This change appears to cause controller resets and block read failures
which prevents successful booting on some hikey boards.

Cc: Ryan Grachek <ryan@edited.us>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: stable <stable@vger.kernel.org> #4.17+
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -301,7 +301,6 @@
 
 		dwmmc_0: dwmmc0@f723d000 {
 			cap-mmc-highspeed;
-			mmc-hs200-1_8v;
 			non-removable;
 			bus-width = <0x8>;
 			vmmc-supply = <&ldo19>;

[PATCH 4.20 157/171] ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.

Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for
exynos4412-odroid-common") added MMC power sequence for eMMC card of
Odroid X2/U3. It reused generic sd1_cd pin control configuration node
and only disabled pull-up. However that time the pinctrl configuration
was not applied during MMC power sequence driver initialization. This
has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to
proper platform device").

It turned out then, that the provided pinctrl configuration is not
correct, because the eMMC_RTSN line is being re-configured as 'special
function/card detect function for mmc1 controller' not the simple
'output', thus the power sequence driver doesn't really set the pin
value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this
by providing separate node with eMMC_RTSN pin configuration.

Cc: <stable@vger.kernel.org>
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -49,7 +49,7 @@
 	};
 
 	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&sd1_cd>;
+		pinctrl-0 = <&emmc_rstn>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
@@ -161,12 +161,6 @@
 	cpu0-supply = <&buck2_reg>;
 };
 
-/* RSTN signal for eMMC */
-&sd1_cd {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
@@ -184,6 +178,11 @@
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
+
+	emmc_rstn: emmc-rstn {
+		samsung,pins = "gpk1-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &ehci {

[PATCH 4.20 158/171] ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit a66352e005488ecb4b534ba1af58a9f671eba9b8 upstream.

Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250
PMU node. This fixes the following warning on boot:

exynos_clkout_init: failed to register clkout clock

Fixes: d19bb397e19e ("ARM: dts: exynos: Update PMU node with CLKOUT related data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos3250.dtsi |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -168,6 +168,9 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+			clock-names = "clkout8";
+			clocks = <&cmu CLK_FIN_PLL>;
+			#clock-cells = <1>;
 		};
 
 		mipi_phy: video-phy {

[PATCH 4.20 159/171] ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit a3238924a820c1d7c977b632b769f3b5690cba09 upstream.

The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is
set too low. Increase it to the 2000mV as specified on the board schematic.
So far the board worked fine, because of the bug in the PMIC driver, which
used incorrect step value for that regulator. It interpreted the voltage
value set by the bootloader as 1225mV and kept it unchanged. The regulator
driver has been however fixed recently in the commit 56b5d4ea778c
("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results
in reading the proper buck8 value and forcing it to 1500mV on boot. This
is not enough for proper board operation and results in eMMC errors during
heavy IO traffic. Increasing maximum voltage value for buck8 restores
original driver behavior and fixes eMMC issues.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 86a2d2ac5e5d ("ARM: dts: Add dts file for Odroid XU3 board")
Fixes: 56b5d4ea778c ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -467,7 +467,7 @@
 			buck8_reg: BUCK8 {
 				regulator-name = "vdd_1.8v_ldo";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
+				regulator-max-microvolt = <2000000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};

[PATCH 4.20 160/171] drm: disable uncached DMA optimization for ARM and arm64

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e02f5c1bb2283cfcee68f2f0feddcc06150f13aa ]

The DRM driver stack is designed to work with cache coherent devices
only, but permits an optimization to be enabled in some cases, where
for some buffers, both the CPU and the GPU use uncached mappings,
removing the need for DMA snooping and allocation in the CPU caches.

The use of uncached GPU mappings relies on the correct implementation
of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU
will use cached mappings nonetheless. On x86 platforms, this does not
seem to matter, as uncached CPU mappings will snoop the caches in any
case. However, on ARM and arm64, enabling this optimization on a
platform where NoSnoop is ignored results in loss of coherency, which
breaks correct operation of the device. Since we have no way of
detecting whether NoSnoop works or not, just disable this
optimization entirely for ARM and arm64.

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Zhou <David1.Zhou@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Michel Daenzer <michel.daenzer@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: amd-gfx list <amd-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Reported-by: Carsten Haitzler <Carsten.Haitzler@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.kernel.org/patch/10778815/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_cache.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/include/drm/drm_cache.h b/include/drm/drm_cache.h
index bfe1639df02d..97fc498dc767 100644
--- a/include/drm/drm_cache.h
+++ b/include/drm/drm_cache.h
@@ -47,6 +47,24 @@ static inline bool drm_arch_can_wc_memory(void)
 	return false;
 #elif defined(CONFIG_MIPS) && defined(CONFIG_CPU_LOONGSON3)
 	return false;
+#elif defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+	/*
+	 * The DRM driver stack is designed to work with cache coherent devices
+	 * only, but permits an optimization to be enabled in some cases, where
+	 * for some buffers, both the CPU and the GPU use uncached mappings,
+	 * removing the need for DMA snooping and allocation in the CPU caches.
+	 *
+	 * The use of uncached GPU mappings relies on the correct implementation
+	 * of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU
+	 * will use cached mappings nonetheless. On x86 platforms, this does not
+	 * seem to matter, as uncached CPU mappings will snoop the caches in any
+	 * case. However, on ARM and arm64, enabling this optimization on a
+	 * platform where NoSnoop is ignored results in loss of coherency, which
+	 * breaks correct operation of the device. Since we have no way of
+	 * detecting whether NoSnoop works or not, just disable this
+	 * optimization entirely for ARM and arm64.
+	 */
+	return false;
 #else
 	return true;
 #endif
-- 
2.19.1

[PATCH 4.20 161/171] media: Revert "media: rc: some events are dropped by userspace"

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Young <sean@mess.org>

commit 05f0edadcc5fccdfc0676825b3e70e75dc0a8a84 upstream.

When an rc device is created, we do not know what key codes it will
support, since a new keymap might be loaded at some later point. So,
we set all keybit in the input device.

The uevent for the input device includes all the key codes, of which
there are now 768. This overflows the size of the uevent
(UEVENT_BUFFER_SIZE) and no event is generated.

Revert for now until we figure out a different solution.

This reverts commit fec225a04330d0f222d24feb5bea045526031675.

Cc: <stable@vger.kernel.org> # 4.20+
Reported-by: Christian Holpert <christian@holpert.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/rc/rc-main.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -274,6 +274,7 @@ static unsigned int ir_update_mapping(st
 				      unsigned int new_keycode)
 {
 	int old_keycode = rc_map->scan[index].keycode;
+	int i;
 
 	/* Did the user wish to remove the mapping? */
 	if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
@@ -288,9 +289,20 @@ static unsigned int ir_update_mapping(st
 			old_keycode == KEY_RESERVED ? "New" : "Replacing",
 			rc_map->scan[index].scancode, new_keycode);
 		rc_map->scan[index].keycode = new_keycode;
+		__set_bit(new_keycode, dev->input_dev->keybit);
 	}
 
 	if (old_keycode != KEY_RESERVED) {
+		/* A previous mapping was updated... */
+		__clear_bit(old_keycode, dev->input_dev->keybit);
+		/* ... but another scancode might use the same keycode */
+		for (i = 0; i < rc_map->len; i++) {
+			if (rc_map->scan[i].keycode == old_keycode) {
+				__set_bit(old_keycode, dev->input_dev->keybit);
+				break;
+			}
+		}
+
 		/* Possibly shrink the keytable, failure is not a problem */
 		ir_resize_table(dev, rc_map, GFP_ATOMIC);
 	}
@@ -1750,7 +1762,6 @@ static int rc_prepare_rx_device(struct r
 	set_bit(EV_REP, dev->input_dev->evbit);
 	set_bit(EV_MSC, dev->input_dev->evbit);
 	set_bit(MSC_SCAN, dev->input_dev->mscbit);
-	bitmap_fill(dev->input_dev->keybit, KEY_CNT);
 
 	/* Pointer/mouse events */
 	set_bit(EV_REL, dev->input_dev->evbit);

[PATCH 4.20 162/171] Revert "PCI/PME: Implement runtime PM callbacks"

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit c528f7bd362b097eeeafa6fbbeccd9750b79c7ba upstream.

This reverts commit 0e157e52860441cb26051f131dd0b5ae3187a07b.

Heiner reported that the commit in question prevents his network adapter
from triggering PME and waking up when network cable is plugged.

The commit tried to prevent root port waking up from D3cold immediately but
looks like disabing root port PME interrupt is not the right way to fix
that issue so revert it now.  The patch following proposes an alternative
solution to that issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202103
Fixes: 0e157e528604 ("PCI/PME: Implement runtime PM callbacks")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org	# v4.20+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pcie/pme.c |   27 ---------------------------
 1 file changed, 27 deletions(-)

--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -432,31 +432,6 @@ static void pcie_pme_remove(struct pcie_
 	kfree(get_service_data(srv));
 }
 
-static int pcie_pme_runtime_suspend(struct pcie_device *srv)
-{
-	struct pcie_pme_service_data *data = get_service_data(srv);
-
-	spin_lock_irq(&data->lock);
-	pcie_pme_interrupt_enable(srv->port, false);
-	pcie_clear_root_pme_status(srv->port);
-	data->noirq = true;
-	spin_unlock_irq(&data->lock);
-
-	return 0;
-}
-
-static int pcie_pme_runtime_resume(struct pcie_device *srv)
-{
-	struct pcie_pme_service_data *data = get_service_data(srv);
-
-	spin_lock_irq(&data->lock);
-	pcie_pme_interrupt_enable(srv->port, true);
-	data->noirq = false;
-	spin_unlock_irq(&data->lock);
-
-	return 0;
-}
-
 static struct pcie_port_service_driver pcie_pme_driver = {
 	.name		= "pcie_pme",
 	.port_type	= PCI_EXP_TYPE_ROOT_PORT,
@@ -464,8 +439,6 @@ static struct pcie_port_service_driver p
 
 	.probe		= pcie_pme_probe,
 	.suspend	= pcie_pme_suspend,
-	.runtime_suspend = pcie_pme_runtime_suspend,
-	.runtime_resume	= pcie_pme_runtime_resume,
 	.resume		= pcie_pme_resume,
 	.remove		= pcie_pme_remove,
 };

[PATCH 4.20 163/171] sk_msg: Always cancel strp work before freeing the psock

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jakub Sitnicki <jakub@cloudflare.com>

commit 1d79895aef18fa05789995d86d523c9b2ee58a02 upstream.

Despite having stopped the parser, we still need to deinitialize it
by calling strp_done so that it cancels its work. Otherwise the worker
thread can run after we have freed the parser, and attempt to access
its workqueue resulting in a use-after-free:

==================================================================
BUG: KASAN: use-after-free in pwq_activate_delayed_work+0x1b/0x1d0
Read of size 8 at addr ffff888069975240 by task kworker/u2:2/93

CPU: 0 PID: 93 Comm: kworker/u2:2 Not tainted 5.0.0-rc2-00335-g28f9d1a3d4fe-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
Workqueue:            (null) (kstrp)
Call Trace:
 print_address_description+0x6e/0x2b0
 ? pwq_activate_delayed_work+0x1b/0x1d0
 kasan_report+0xfd/0x177
 ? pwq_activate_delayed_work+0x1b/0x1d0
 ? pwq_activate_delayed_work+0x1b/0x1d0
 pwq_activate_delayed_work+0x1b/0x1d0
 ? process_one_work+0x4aa/0x660
 pwq_dec_nr_in_flight+0x9b/0x100
 worker_thread+0x82/0x680
 ? process_one_work+0x660/0x660
 kthread+0x1b9/0x1e0
 ? __kthread_create_on_node+0x250/0x250
 ret_from_fork+0x1f/0x30

Allocated by task 111:
 sk_psock_init+0x3c/0x1b0
 sock_map_link.isra.2+0x103/0x4b0
 sock_map_update_common+0x94/0x270
 sock_map_update_elem+0x145/0x160
 __se_sys_bpf+0x152e/0x1e10
 do_syscall_64+0xb2/0x3e0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 112:
 kfree+0x7f/0x140
 process_one_work+0x40b/0x660
 worker_thread+0x82/0x680
 kthread+0x1b9/0x1e0
 ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff888069975180
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 192 bytes inside of
 512-byte region [ffff888069975180, ffff888069975380)
The buggy address belongs to the page:
page:ffffea0001a65d00 count:1 mapcount:0 mapping:ffff88806d401280 index:0x0 compound_mapcount: 0
flags: 0x4000000000010200(slab|head)
raw: 4000000000010200 dead000000000100 dead000000000200 ffff88806d401280
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888069975100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff888069975180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888069975200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                           ^
 ffff888069975280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888069975300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Reported-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/netdev/CAJPywTLwgXNEZ2dZVoa=udiZmtrWJ0q5SuBW64aYs0Y1khXX3A@mail.gmail.com
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/skmsg.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -545,8 +545,7 @@ static void sk_psock_destroy_deferred(st
 	struct sk_psock *psock = container_of(gc, struct sk_psock, gc);
 
 	/* No sk_callback_lock since already detached. */
-	if (psock->parser.enabled)
-		strp_done(&psock->parser.strp);
+	strp_done(&psock->parser.strp);
 
 	cancel_work_sync(&psock->work);
 

[PATCH 4.20 164/171] bpf: Stop the psock parser before canceling its work

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jakub Sitnicki <jakub@cloudflare.com>

commit e8e3437762ad938880dd48a3c52d702e7cf3c124 upstream.

We might have never enabled (started) the psock's parser, in which case it
will not get stopped when destroying the psock. This leads to a warning
when trying to cancel parser's work from psock's deferred destructor:

[  405.325769] WARNING: CPU: 1 PID: 3216 at net/strparser/strparser.c:526 strp_done+0x3c/0x40
[  405.326712] Modules linked in: [last unloaded: test_bpf]
[  405.327359] CPU: 1 PID: 3216 Comm: kworker/1:164 Tainted: G        W         5.0.0 #42
[  405.328294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014
[  405.329712] Workqueue: events sk_psock_destroy_deferred
[  405.330254] RIP: 0010:strp_done+0x3c/0x40
[  405.330706] Code: 28 e8 b8 d5 6b ff 48 8d bb 80 00 00 00 e8 9c d5 6b ff 48 8b 7b 18 48 85 ff 74 0d e8 1e a5 e8 ff 48 c7 43 18 00 00 00 00 5b c3 <0f> 0b eb cf 66 66 66 66 90 55 89 f5 53 48 89 fb 48 83 c7 28 e8 0b
[  405.332862] RSP: 0018:ffffc900026bbe50 EFLAGS: 00010246
[  405.333482] RAX: ffffffff819323e0 RBX: ffff88812cb83640 RCX: ffff88812cb829e8
[  405.334228] RDX: 0000000000000001 RSI: ffff88812cb837e8 RDI: ffff88812cb83640
[  405.335366] RBP: ffff88813fd22680 R08: 0000000000000000 R09: 000073746e657665
[  405.336472] R10: 8080808080808080 R11: 0000000000000001 R12: ffff88812cb83600
[  405.337760] R13: 0000000000000000 R14: ffff88811f401780 R15: ffff88812cb837e8
[  405.338777] FS:  0000000000000000(0000) GS:ffff88813fd00000(0000) knlGS:0000000000000000
[  405.339903] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  405.340821] CR2: 00007fb11489a6b8 CR3: 000000012d4d6000 CR4: 00000000000406e0
[  405.341981] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  405.343131] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  405.344415] Call Trace:
[  405.344821]  sk_psock_destroy_deferred+0x23/0x1b0
[  405.345585]  process_one_work+0x1ae/0x3e0
[  405.346110]  worker_thread+0x3c/0x3b0
[  405.346576]  ? pwq_unbound_release_workfn+0xd0/0xd0
[  405.347187]  kthread+0x11d/0x140
[  405.347601]  ? __kthread_parkme+0x80/0x80
[  405.348108]  ret_from_fork+0x35/0x40
[  405.348566] ---[ end trace a4a3af4026a327d4 ]---

Stop psock's parser just before canceling its work.

Fixes: 1d79895aef18 ("sk_msg: Always cancel strp work before freeing the psock")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/skmsg.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -545,6 +545,7 @@ static void sk_psock_destroy_deferred(st
 	struct sk_psock *psock = container_of(gc, struct sk_psock, gc);
 
 	/* No sk_callback_lock since already detached. */
+	strp_stop(&psock->parser.strp);
 	strp_done(&psock->parser.strp);
 
 	cancel_work_sync(&psock->work);

[PATCH 4.20 165/171] gfs2: Fix missed wakeups in find_insert_glock

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Gruenbacher <agruenba@redhat.com>

commit 605b0487f0bc1ae9963bf52ece0f5c8055186f81 upstream.

Mark Syms has reported seeing tasks that are stuck waiting in
find_insert_glock.  It turns out that struct lm_lockname contains four padding
bytes on 64-bit architectures that function glock_waitqueue doesn't skip when
hashing the glock name.  As a result, we can end up waking up the wrong
waitqueue, and the waiting tasks may be stuck forever.

Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for
the key length.

Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/gfs2/glock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -107,7 +107,7 @@ static int glock_wake_function(wait_queu
 
 static wait_queue_head_t *glock_waitqueue(struct lm_lockname *name)
 {
-	u32 hash = jhash2((u32 *)name, sizeof(*name) / 4, 0);
+	u32 hash = jhash2((u32 *)name, ht_parms.key_len / 4, 0);
 
 	return glock_wait_table + hash_32(hash, GLOCK_WAIT_TABLE_BITS);
 }

[PATCH 4.20 166/171] staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gao Xiang <gaoxiang25@huawei.com>

commit 419d6efc50e94bcf5d6b35cd8c71f79edadec564 upstream.

As Al pointed out, "
... and while we are at it, what happens to
	unsigned int nameoff = le16_to_cpu(de[mid].nameoff);
	unsigned int matched = min(startprfx, endprfx);

	struct qstr dname = QSTR_INIT(data + nameoff,
		unlikely(mid >= ndirents - 1) ?
			maxsize - nameoff :
			le16_to_cpu(de[mid + 1].nameoff) - nameoff);

	/* string comparison without already matched prefix */
	int ret = dirnamecmp(name, &dname, &matched);
if le16_to_cpu(de[...].nameoff) is not monotonically increasing?  I.e.
what's to prevent e.g. (unsigned)-1 ending up in dname.len?

Corrupted fs image shouldn't oops the kernel.. "

Revisit the related lookup flow to address the issue.

Fixes: d72d1ce60174 ("staging: erofs: add namei functions")
Cc: <stable@vger.kernel.org> # 4.19+
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/staging/erofs/namei.c |  183 ++++++++++++++++++++++--------------------
 1 file changed, 97 insertions(+), 86 deletions(-)

--- a/drivers/staging/erofs/namei.c
+++ b/drivers/staging/erofs/namei.c
@@ -15,74 +15,77 @@
 
 #include <trace/events/erofs.h>
 
-/* based on the value of qn->len is accurate */
-static inline int dirnamecmp(struct qstr *qn,
-	struct qstr *qd, unsigned int *matched)
+struct erofs_qstr {
+	const unsigned char *name;
+	const unsigned char *end;
+};
+
+/* based on the end of qn is accurate and it must have the trailing '\0' */
+static inline int dirnamecmp(const struct erofs_qstr *qn,
+			     const struct erofs_qstr *qd,
+			     unsigned int *matched)
 {
-	unsigned int i = *matched, len = min(qn->len, qd->len);
-loop:
-	if (unlikely(i >= len)) {
-		*matched = i;
-		if (qn->len < qd->len) {
-			/*
-			 * actually (qn->len == qd->len)
-			 * when qd->name[i] == '\0'
-			 */
-			return qd->name[i] == '\0' ? 0 : -1;
-		}
-		return (qn->len > qd->len);
-	}
+	unsigned int i = *matched;
 
-	if (qn->name[i] != qd->name[i]) {
-		*matched = i;
-		return qn->name[i] > qd->name[i] ? 1 : -1;
+	/*
+	 * on-disk error, let's only BUG_ON in the debugging mode.
+	 * otherwise, it will return 1 to just skip the invalid name
+	 * and go on (in consideration of the lookup performance).
+	 */
+	DBG_BUGON(qd->name > qd->end);
+
+	/* qd could not have trailing '\0' */
+	/* However it is absolutely safe if < qd->end */
+	while (qd->name + i < qd->end && qd->name[i] != '\0') {
+		if (qn->name[i] != qd->name[i]) {
+			*matched = i;
+			return qn->name[i] > qd->name[i] ? 1 : -1;
+		}
+		++i;
 	}
-
-	++i;
-	goto loop;
+	*matched = i;
+	/* See comments in __d_alloc on the terminating NUL character */
+	return qn->name[i] == '\0' ? 0 : 1;
 }
 
-static struct erofs_dirent *find_target_dirent(
-	struct qstr *name,
-	u8 *data, int maxsize)
+#define nameoff_from_disk(off, sz)	(le16_to_cpu(off) & ((sz) - 1))
+
+static struct erofs_dirent *find_target_dirent(struct erofs_qstr *name,
+					       u8 *data,
+					       unsigned int dirblksize,
+					       const int ndirents)
 {
-	unsigned int ndirents, head, back;
+	int head, back;
 	unsigned int startprfx, endprfx;
 	struct erofs_dirent *const de = (struct erofs_dirent *)data;
 
-	/* make sure that maxsize is valid */
-	BUG_ON(maxsize < sizeof(struct erofs_dirent));
-
-	ndirents = le16_to_cpu(de->nameoff) / sizeof(*de);
-
-	/* corrupted dir (may be unnecessary...) */
-	BUG_ON(!ndirents);
-
-	head = 0;
+	/* since the 1st dirent has been evaluated previously */
+	head = 1;
 	back = ndirents - 1;
 	startprfx = endprfx = 0;
 
 	while (head <= back) {
-		unsigned int mid = head + (back - head) / 2;
-		unsigned int nameoff = le16_to_cpu(de[mid].nameoff);
+		const int mid = head + (back - head) / 2;
+		const int nameoff = nameoff_from_disk(de[mid].nameoff,
+						      dirblksize);
 		unsigned int matched = min(startprfx, endprfx);
-
-		struct qstr dname = QSTR_INIT(data + nameoff,
-			unlikely(mid >= ndirents - 1) ?
-				maxsize - nameoff :
-				le16_to_cpu(de[mid + 1].nameoff) - nameoff);
+		struct erofs_qstr dname = {
+			.name = data + nameoff,
+			.end = unlikely(mid >= ndirents - 1) ?
+				data + dirblksize :
+				data + nameoff_from_disk(de[mid + 1].nameoff,
+							 dirblksize)
+		};
 
 		/* string comparison without already matched prefix */
 		int ret = dirnamecmp(name, &dname, &matched);
 
-		if (unlikely(!ret))
+		if (unlikely(!ret)) {
 			return de + mid;
-		else if (ret > 0) {
+		} else if (ret > 0) {
 			head = mid + 1;
 			startprfx = matched;
-		} else if (unlikely(mid < 1))	/* fix "mid" overflow */
-			break;
-		else {
+		} else {
 			back = mid - 1;
 			endprfx = matched;
 		}
@@ -91,12 +94,12 @@ static struct erofs_dirent *find_target_
 	return ERR_PTR(-ENOENT);
 }
 
-static struct page *find_target_block_classic(
-	struct inode *dir,
-	struct qstr *name, int *_diff)
+static struct page *find_target_block_classic(struct inode *dir,
+					      struct erofs_qstr *name,
+					      int *_ndirents)
 {
 	unsigned int startprfx, endprfx;
-	unsigned int head, back;
+	int head, back;
 	struct address_space *const mapping = dir->i_mapping;
 	struct page *candidate = ERR_PTR(-ENOENT);
 
@@ -105,41 +108,43 @@ static struct page *find_target_block_cl
 	back = inode_datablocks(dir) - 1;
 
 	while (head <= back) {
-		unsigned int mid = head + (back - head) / 2;
+		const int mid = head + (back - head) / 2;
 		struct page *page = read_mapping_page(mapping, mid, NULL);
 
-		if (IS_ERR(page)) {
-exact_out:
-			if (!IS_ERR(candidate)) /* valid candidate */
-				put_page(candidate);
-			return page;
-		} else {
-			int diff;
-			unsigned int ndirents, matched;
-			struct qstr dname;
+		if (!IS_ERR(page)) {
 			struct erofs_dirent *de = kmap_atomic(page);
-			unsigned int nameoff = le16_to_cpu(de->nameoff);
-
-			ndirents = nameoff / sizeof(*de);
+			const int nameoff = nameoff_from_disk(de->nameoff,
+							      EROFS_BLKSIZ);
+			const int ndirents = nameoff / sizeof(*de);
+			int diff;
+			unsigned int matched;
+			struct erofs_qstr dname;
 
-			/* corrupted dir (should have one entry at least) */
-			BUG_ON(!ndirents || nameoff > PAGE_SIZE);
+			if (unlikely(!ndirents)) {
+				DBG_BUGON(1);
+				kunmap_atomic(de);
+				put_page(page);
+				page = ERR_PTR(-EIO);
+				goto out;
+			}
 
 			matched = min(startprfx, endprfx);
 
 			dname.name = (u8 *)de + nameoff;
-			dname.len = ndirents == 1 ?
-				/* since the rest of the last page is 0 */
-				EROFS_BLKSIZ - nameoff
-				: le16_to_cpu(de[1].nameoff) - nameoff;
+			if (ndirents == 1)
+				dname.end = (u8 *)de + EROFS_BLKSIZ;
+			else
+				dname.end = (u8 *)de +
+					nameoff_from_disk(de[1].nameoff,
+							  EROFS_BLKSIZ);
 
 			/* string comparison without already matched prefix */
 			diff = dirnamecmp(name, &dname, &matched);
 			kunmap_atomic(de);
 
 			if (unlikely(!diff)) {
-				*_diff = 0;
-				goto exact_out;
+				*_ndirents = 0;
+				goto out;
 			} else if (diff > 0) {
 				head = mid + 1;
 				startprfx = matched;
@@ -147,45 +152,51 @@ exact_out:
 				if (likely(!IS_ERR(candidate)))
 					put_page(candidate);
 				candidate = page;
+				*_ndirents = ndirents;
 			} else {
 				put_page(page);
 
-				if (unlikely(mid < 1))	/* fix "mid" overflow */
-					break;
-
 				back = mid - 1;
 				endprfx = matched;
 			}
+			continue;
 		}
+out:		/* free if the candidate is valid */
+		if (!IS_ERR(candidate))
+			put_page(candidate);
+		return page;
 	}
-	*_diff = 1;
 	return candidate;
 }
 
 int erofs_namei(struct inode *dir,
-	struct qstr *name,
-	erofs_nid_t *nid, unsigned int *d_type)
+		struct qstr *name,
+		erofs_nid_t *nid, unsigned int *d_type)
 {
-	int diff;
+	int ndirents;
 	struct page *page;
-	u8 *data;
+	void *data;
 	struct erofs_dirent *de;
+	struct erofs_qstr qn;
 
 	if (unlikely(!dir->i_size))
 		return -ENOENT;
 
-	diff = 1;
-	page = find_target_block_classic(dir, name, &diff);
+	qn.name = name->name;
+	qn.end = name->name + name->len;
+
+	ndirents = 0;
+	page = find_target_block_classic(dir, &qn, &ndirents);
 
 	if (unlikely(IS_ERR(page)))
 		return PTR_ERR(page);
 
 	data = kmap_atomic(page);
 	/* the target page has been mapped */
-	de = likely(diff) ?
-		/* since the rest of the last page is 0 */
-		find_target_dirent(name, data, EROFS_BLKSIZ) :
-		(struct erofs_dirent *)data;
+	if (ndirents)
+		de = find_target_dirent(&qn, data, EROFS_BLKSIZ, ndirents);
+	else
+		de = (struct erofs_dirent *)data;
 
 	if (likely(!IS_ERR(de))) {
 		*nid = le64_to_cpu(de->nid);

[PATCH 4.20 167/171] ath9k: Avoid OF no-EEPROM quirks without qca,no-eeprom

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel F. Dickinson <cshored@thecshore.com>

commit ce938231bd3b1d7af3cbd8836f084801090470e1 upstream.

ath9k_of_init() function[0] was initially written on the assumption that
if someone had an explicit ath9k OF node that "there must be something
wrong, why would someone add an OF node if everything is fine"[1]
(Quoting Martin Blumenstingl <martin.blumenstingl@googlemail.com>)

"it turns out it's not that simple. with your requirements I'm now aware
of two use-cases where the current code in ath9k_of_init() doesn't work
without modifications"[1]

The "your requirements" Martin speaks of is the result of the fact that I
have a device (PowerCloud Systems CR5000) has some kind of default - not
unique mac address - set and requires to set the correct MAC address via
mac-address devicetree property, however:

"some cards come with a physical EEPROM chip [or OTP] so "qca,no-eeprom"
should not be set (your use-case). in this case AH_USE_EEPROM should be
set (which is the default when there is no OF node)"[1]

The other use case is:

the firmware on some PowerMac G5 seems to add a OF node for the ath9k
card automatically. depending on the EEPROM on the card AH_NO_EEP_SWAP
should be unset (which is the default when there is no OF node). see [3]

After this patch to ath9k_of_init() the new behavior will be:

    if there's no OF node then everything is the same as before
    if there's an empty OF node then ath9k will use the hardware EEPROM
      (before ath9k would fail to initialize because no EEPROM data was
      provided by userspace)
    if there's an OF node with only a MAC address then ath9k will use
      the MAC address and the hardware EEPROM (see the case above)
    with "qca,no-eeprom" EEPROM data from userspace will be requested.
      the behavior here will not change
[1]

Martin provides additional background on EEPROM swapping[1].

Thanks to Christian Lamparter <chunkeey@gmail.com> for all his help on
troubleshooting this issue and the basis for this patch.

[0]https://elixir.bootlin.com/linux/v4.20-rc7/source/drivers/net/wireless/ath/ath9k/init.c#L615
[1]https://github.com/openwrt/openwrt/pull/1645#issuecomment-448027058
[2]https://github.com/openwrt/openwrt/pull/1613
[3]https://patchwork.kernel.org/patch/10241731/

Fixes: 138b41253d9c ("ath9k: parse the device configuration from an OF node")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/init.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -636,15 +636,15 @@ static int ath9k_of_init(struct ath_soft
 		ret = ath9k_eeprom_request(sc, eeprom_name);
 		if (ret)
 			return ret;
+
+		ah->ah_flags &= ~AH_USE_EEPROM;
+		ah->ah_flags |= AH_NO_EEP_SWAP;
 	}
 
 	mac = of_get_mac_address(np);
 	if (mac)
 		ether_addr_copy(common->macaddr, mac);
 
-	ah->ah_flags &= ~AH_USE_EEPROM;
-	ah->ah_flags |= AH_NO_EEP_SWAP;
-
 	return 0;
 }
 

[PATCH 4.20 168/171] perf/x86/intel: Make cpuc allocations consistent

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Peter Zijlstra (Intel)" <peterz@infradead.org>

commit d01b1f96a82e5dd7841a1d39db3abfdaf95f70ab upstream

The cpuc data structure allocation is different between fake and real
cpuc's; use the same code to init/free both.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/core.c       |   13 +++++--------
 arch/x86/events/intel/core.c |   29 ++++++++++++++++++-----------
 arch/x86/events/perf_event.h |   11 ++++++++---
 3 files changed, 31 insertions(+), 22 deletions(-)

--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -1995,7 +1995,7 @@ static int x86_pmu_commit_txn(struct pmu
  */
 static void free_fake_cpuc(struct cpu_hw_events *cpuc)
 {
-	kfree(cpuc->shared_regs);
+	intel_cpuc_finish(cpuc);
 	kfree(cpuc);
 }
 
@@ -2007,14 +2007,11 @@ static struct cpu_hw_events *allocate_fa
 	cpuc = kzalloc(sizeof(*cpuc), GFP_KERNEL);
 	if (!cpuc)
 		return ERR_PTR(-ENOMEM);
-
-	/* only needed, if we have extra_regs */
-	if (x86_pmu.extra_regs) {
-		cpuc->shared_regs = allocate_shared_regs(cpu);
-		if (!cpuc->shared_regs)
-			goto error;
-	}
 	cpuc->is_fake = 1;
+
+	if (intel_cpuc_prepare(cpuc, cpu))
+		goto error;
+
 	return cpuc;
 error:
 	free_fake_cpuc(cpuc);
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3398,7 +3398,7 @@ ssize_t intel_event_sysfs_show(char *pag
 	return x86_event_sysfs_show(page, config, event);
 }
 
-struct intel_shared_regs *allocate_shared_regs(int cpu)
+static struct intel_shared_regs *allocate_shared_regs(int cpu)
 {
 	struct intel_shared_regs *regs;
 	int i;
@@ -3430,10 +3430,9 @@ static struct intel_excl_cntrs *allocate
 	return c;
 }
 
-static int intel_pmu_cpu_prepare(int cpu)
-{
-	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
 
+int intel_cpuc_prepare(struct cpu_hw_events *cpuc, int cpu)
+{
 	if (x86_pmu.extra_regs || x86_pmu.lbr_sel_map) {
 		cpuc->shared_regs = allocate_shared_regs(cpu);
 		if (!cpuc->shared_regs)
@@ -3443,7 +3442,7 @@ static int intel_pmu_cpu_prepare(int cpu
 	if (x86_pmu.flags & PMU_FL_EXCL_CNTRS) {
 		size_t sz = X86_PMC_IDX_MAX * sizeof(struct event_constraint);
 
-		cpuc->constraint_list = kzalloc(sz, GFP_KERNEL);
+		cpuc->constraint_list = kzalloc_node(sz, GFP_KERNEL, cpu_to_node(cpu));
 		if (!cpuc->constraint_list)
 			goto err_shared_regs;
 
@@ -3468,6 +3467,11 @@ err:
 	return -ENOMEM;
 }
 
+static int intel_pmu_cpu_prepare(int cpu)
+{
+	return intel_cpuc_prepare(&per_cpu(cpu_hw_events, cpu), cpu);
+}
+
 static void flip_smm_bit(void *data)
 {
 	unsigned long set = *(unsigned long *)data;
@@ -3542,9 +3546,8 @@ static void intel_pmu_cpu_starting(int c
 	}
 }
 
-static void free_excl_cntrs(int cpu)
+static void free_excl_cntrs(struct cpu_hw_events *cpuc)
 {
-	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
 	struct intel_excl_cntrs *c;
 
 	c = cpuc->excl_cntrs;
@@ -3565,9 +3568,8 @@ static void intel_pmu_cpu_dying(int cpu)
 		disable_counter_freeze();
 }
 
-static void intel_pmu_cpu_dead(int cpu)
+void intel_cpuc_finish(struct cpu_hw_events *cpuc)
 {
-	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
 	struct intel_shared_regs *pc;
 
 	pc = cpuc->shared_regs;
@@ -3577,7 +3579,12 @@ static void intel_pmu_cpu_dead(int cpu)
 		cpuc->shared_regs = NULL;
 	}
 
-	free_excl_cntrs(cpu);
+	free_excl_cntrs(cpuc);
+}
+
+static void intel_pmu_cpu_dead(int cpu)
+{
+	intel_cpuc_finish(&per_cpu(cpu_hw_events, cpu));
 }
 
 static void intel_pmu_sched_task(struct perf_event_context *ctx,
@@ -4715,7 +4722,7 @@ static __init int fixup_ht_bug(void)
 	hardlockup_detector_perf_restart();
 
 	for_each_online_cpu(c)
-		free_excl_cntrs(c);
+		free_excl_cntrs(&per_cpu(cpu_hw_events, c));
 
 	cpus_read_unlock();
 	pr_info("PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off\n");
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -889,7 +889,8 @@ struct event_constraint *
 x86_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
 			  struct perf_event *event);
 
-struct intel_shared_regs *allocate_shared_regs(int cpu);
+extern int intel_cpuc_prepare(struct cpu_hw_events *cpuc, int cpu);
+extern void intel_cpuc_finish(struct cpu_hw_events *cpuc);
 
 int intel_pmu_init(void);
 
@@ -1025,9 +1026,13 @@ static inline int intel_pmu_init(void)
 	return 0;
 }
 
-static inline struct intel_shared_regs *allocate_shared_regs(int cpu)
+static inline int intel_cpuc_prepare(struct cpu_hw_event *cpuc, int cpu)
+{
+	return 0;
+}
+
+static inline void intel_cpuc_finish(struct cpu_hw_event *cpuc)
 {
-	return NULL;
 }
 
 static inline int is_ht_workaround_enabled(void)

[PATCH 4.20 169/171] perf/x86/intel: Generalize dynamic constraint creation

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Peter Zijlstra (Intel)" <peterz@infradead.org>

commit 11f8b2d65ca9029591c8df26bb6bd063c312b7fe upstream

Such that we can re-use it.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/intel/core.c |   51 +++++++++++++++++++++++++------------------
 1 file changed, 30 insertions(+), 21 deletions(-)

--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2769,6 +2769,35 @@ intel_stop_scheduling(struct cpu_hw_even
 }
 
 static struct event_constraint *
+dyn_constraint(struct cpu_hw_events *cpuc, struct event_constraint *c, int idx)
+{
+	WARN_ON_ONCE(!cpuc->constraint_list);
+
+	if (!(c->flags & PERF_X86_EVENT_DYNAMIC)) {
+		struct event_constraint *cx;
+
+		/*
+		 * grab pre-allocated constraint entry
+		 */
+		cx = &cpuc->constraint_list[idx];
+
+		/*
+		 * initialize dynamic constraint
+		 * with static constraint
+		 */
+		*cx = *c;
+
+		/*
+		 * mark constraint as dynamic
+		 */
+		cx->flags |= PERF_X86_EVENT_DYNAMIC;
+		c = cx;
+	}
+
+	return c;
+}
+
+static struct event_constraint *
 intel_get_excl_constraints(struct cpu_hw_events *cpuc, struct perf_event *event,
 			   int idx, struct event_constraint *c)
 {
@@ -2798,27 +2827,7 @@ intel_get_excl_constraints(struct cpu_hw
 	 * only needed when constraint has not yet
 	 * been cloned (marked dynamic)
 	 */
-	if (!(c->flags & PERF_X86_EVENT_DYNAMIC)) {
-		struct event_constraint *cx;
-
-		/*
-		 * grab pre-allocated constraint entry
-		 */
-		cx = &cpuc->constraint_list[idx];
-
-		/*
-		 * initialize dynamic constraint
-		 * with static constraint
-		 */
-		*cx = *c;
-
-		/*
-		 * mark constraint as dynamic, so we
-		 * can free it later on
-		 */
-		cx->flags |= PERF_X86_EVENT_DYNAMIC;
-		c = cx;
-	}
+	c = dyn_constraint(cpuc, c, idx);
 
 	/*
 	 * From here on, the constraint is dynamic.

[PATCH 4.20 170/171] x86: Add TSX Force Abort CPUID/MSR

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Peter Zijlstra (Intel)" <peterz@infradead.org>

commit 52f64909409c17adf54fcf5f9751e0544ca3a6b4 upstream

Skylake systems will receive a microcode update to address a TSX
errata. This microcode will (by default) clobber PMC3 when TSX
instructions are (speculatively or not) executed.

It also provides an MSR to cause all TSX transaction to abort and
preserve PMC3.

Add the CPUID enumeration and MSR definition.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/cpufeatures.h |    1 +
 arch/x86/include/asm/msr-index.h   |    6 ++++++
 2 files changed, 7 insertions(+)

--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -342,6 +342,7 @@
 /* Intel-defined CPU features, CPUID level 0x00000007:0 (EDX), word 18 */
 #define X86_FEATURE_AVX512_4VNNIW	(18*32+ 2) /* AVX-512 Neural Network Instructions */
 #define X86_FEATURE_AVX512_4FMAPS	(18*32+ 3) /* AVX-512 Multiply Accumulation Single precision */
+#define X86_FEATURE_TSX_FORCE_ABORT	(18*32+13) /* "" TSX_FORCE_ABORT */
 #define X86_FEATURE_PCONFIG		(18*32+18) /* Intel PCONFIG */
 #define X86_FEATURE_SPEC_CTRL		(18*32+26) /* "" Speculation Control (IBRS + IBPB) */
 #define X86_FEATURE_INTEL_STIBP		(18*32+27) /* "" Single Thread Indirect Branch Predictors */
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -630,6 +630,12 @@
 
 #define MSR_IA32_TSC_DEADLINE		0x000006E0
 
+
+#define MSR_TSX_FORCE_ABORT		0x0000010F
+
+#define MSR_TFA_RTM_FORCE_ABORT_BIT	0
+#define MSR_TFA_RTM_FORCE_ABORT		BIT_ULL(MSR_TFA_RTM_FORCE_ABORT_BIT)
+
 /* P4/Xeon+ specific */
 #define MSR_IA32_MCG_EAX		0x00000180
 #define MSR_IA32_MCG_EBX		0x00000181

[PATCH 4.20 171/171] perf/x86/intel: Implement support for TSX Force Abort

[Greg Kroah-Hartman]

4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Peter Zijlstra (Intel)" <peterz@infradead.org>

commit 400816f60c543153656ac74eaf7f36f6b7202378 upstream

Skylake (and later) will receive a microcode update to address a TSX
errata. This microcode will, on execution of a TSX instruction
(speculative or not) use (clobber) PMC3. This update will also provide
a new MSR to change this behaviour along with a CPUID bit to enumerate
the presence of this new MSR.

When the MSR gets set; the microcode will no longer use PMC3 but will
Force Abort every TSX transaction (upon executing COMMIT).

When TSX Force Abort (TFA) is allowed (default); the MSR gets set when
PMC3 gets scheduled and cleared when, after scheduling, PMC3 is
unused.

When TFA is not allowed; clear PMC3 from all constraints such that it
will not get used.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/intel/core.c |   74 +++++++++++++++++++++++++++++++++++++++++--
 arch/x86/events/perf_event.h |    6 +++
 2 files changed, 77 insertions(+), 3 deletions(-)

--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -1999,6 +1999,39 @@ static void intel_pmu_nhm_enable_all(int
 	intel_pmu_enable_all(added);
 }
 
+static void intel_set_tfa(struct cpu_hw_events *cpuc, bool on)
+{
+	u64 val = on ? MSR_TFA_RTM_FORCE_ABORT : 0;
+
+	if (cpuc->tfa_shadow != val) {
+		cpuc->tfa_shadow = val;
+		wrmsrl(MSR_TSX_FORCE_ABORT, val);
+	}
+}
+
+static void intel_tfa_commit_scheduling(struct cpu_hw_events *cpuc, int idx, int cntr)
+{
+	/*
+	 * We're going to use PMC3, make sure TFA is set before we touch it.
+	 */
+	if (cntr == 3 && !cpuc->is_fake)
+		intel_set_tfa(cpuc, true);
+}
+
+static void intel_tfa_pmu_enable_all(int added)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	/*
+	 * If we find PMC3 is no longer used when we enable the PMU, we can
+	 * clear TFA.
+	 */
+	if (!test_bit(3, cpuc->active_mask))
+		intel_set_tfa(cpuc, false);
+
+	intel_pmu_enable_all(added);
+}
+
 static void enable_counter_freeze(void)
 {
 	update_debugctlmsr(get_debugctlmsr() |
@@ -3354,6 +3387,26 @@ glp_get_event_constraints(struct cpu_hw_
 	return c;
 }
 
+static bool allow_tsx_force_abort = true;
+
+static struct event_constraint *
+tfa_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
+			  struct perf_event *event)
+{
+	struct event_constraint *c = hsw_get_event_constraints(cpuc, idx, event);
+
+	/*
+	 * Without TFA we must not use PMC3.
+	 */
+	if (!allow_tsx_force_abort && test_bit(3, c->idxmsk)) {
+		c = dyn_constraint(cpuc, c, idx);
+		c->idxmsk64 &= ~(1ULL << 3);
+		c->weight--;
+	}
+
+	return c;
+}
+
 /*
  * Broadwell:
  *
@@ -3448,13 +3501,15 @@ int intel_cpuc_prepare(struct cpu_hw_eve
 			goto err;
 	}
 
-	if (x86_pmu.flags & PMU_FL_EXCL_CNTRS) {
+	if (x86_pmu.flags & (PMU_FL_EXCL_CNTRS | PMU_FL_TFA)) {
 		size_t sz = X86_PMC_IDX_MAX * sizeof(struct event_constraint);
 
 		cpuc->constraint_list = kzalloc_node(sz, GFP_KERNEL, cpu_to_node(cpu));
 		if (!cpuc->constraint_list)
 			goto err_shared_regs;
+	}
 
+	if (x86_pmu.flags & PMU_FL_EXCL_CNTRS) {
 		cpuc->excl_cntrs = allocate_excl_cntrs(cpu);
 		if (!cpuc->excl_cntrs)
 			goto err_constraint_list;
@@ -3564,9 +3619,10 @@ static void free_excl_cntrs(struct cpu_h
 		if (c->core_id == -1 || --c->refcnt == 0)
 			kfree(c);
 		cpuc->excl_cntrs = NULL;
-		kfree(cpuc->constraint_list);
-		cpuc->constraint_list = NULL;
 	}
+
+	kfree(cpuc->constraint_list);
+	cpuc->constraint_list = NULL;
 }
 
 static void intel_pmu_cpu_dying(int cpu)
@@ -4086,8 +4142,11 @@ static struct attribute *intel_pmu_caps_
        NULL
 };
 
+DEVICE_BOOL_ATTR(allow_tsx_force_abort, 0644, allow_tsx_force_abort);
+
 static struct attribute *intel_pmu_attrs[] = {
 	&dev_attr_freeze_on_smi.attr,
+	NULL, /* &dev_attr_allow_tsx_force_abort.attr.attr */
 	NULL,
 };
 
@@ -4580,6 +4639,15 @@ __init int intel_pmu_init(void)
 		tsx_attr = hsw_tsx_events_attrs;
 		intel_pmu_pebs_data_source_skl(
 			boot_cpu_data.x86_model == INTEL_FAM6_SKYLAKE_X);
+
+		if (boot_cpu_has(X86_FEATURE_TSX_FORCE_ABORT)) {
+			x86_pmu.flags |= PMU_FL_TFA;
+			x86_pmu.get_event_constraints = tfa_get_event_constraints;
+			x86_pmu.enable_all = intel_tfa_pmu_enable_all;
+			x86_pmu.commit_scheduling = intel_tfa_commit_scheduling;
+			intel_pmu_attrs[1] = &dev_attr_allow_tsx_force_abort.attr.attr;
+		}
+
 		pr_cont("Skylake events, ");
 		name = "skylake";
 		break;
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -243,6 +243,11 @@ struct cpu_hw_events {
 	int excl_thread_id; /* 0 or 1 */
 
 	/*
+	 * SKL TSX_FORCE_ABORT shadow
+	 */
+	u64				tfa_shadow;
+
+	/*
 	 * AMD specific bits
 	 */
 	struct amd_nb			*amd_nb;
@@ -681,6 +686,7 @@ do {									\
 #define PMU_FL_EXCL_CNTRS	0x4 /* has exclusive counter requirements  */
 #define PMU_FL_EXCL_ENABLED	0x8 /* exclusive counter active */
 #define PMU_FL_PEBS_ALL		0x10 /* all events are valid PEBS events */
+#define PMU_FL_TFA		0x20 /* deal with TSX force abort */
 
 #define EVENT_VAR(_id)  event_attr_##_id
 #define EVENT_PTR(_id) &event_attr_##_id.attr.attr

Re: [PATCH 4.20 000/171] 4.20.16-stable review

[Naresh Kamboju]

On Tue, 12 Mar 2019 at 22:42, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.20.16 release.
> There are 171 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Mar 14 17:02:23 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.16-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.20.16-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.20.y
git commit: dcd2fdc8ae00bd293344e99ba5de929e565ac4f2
git describe: v4.20.15-172-gdcd2fdc8ae00
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.20-oe/build/v4.20.15-172-gdcd2fdc8ae00

No regressions (compared to build v4.20.15)

No fixes (compared to build v4.20.15)

Ran 15192 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm

Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* ltp-fs-tests
* ltp-open-posix-tests

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.20 000/171] 4.20.16-stable review

[Jon Hunter]

On 12/03/2019 17:06, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.20.16 release.
> There are 171 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Mar 14 17:02:23 UTC 2019.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.16-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.20:
    11 builds:	11 pass, 0 fail
    22 boots:	22 pass, 0 fail
    28 tests:	28 pass, 0 fail

Linux version:	4.20.16-rc1-gdcd2fdc
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.20 000/171] 4.20.16-stable review

[Guenter Roeck]

On Tue, Mar 12, 2019 at 10:06:20AM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.20.16 release.
> There are 171 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Mar 14 17:02:23 UTC 2019.
> Anything received after that time might be too late.
> 
Build results:
	total: 159 pass: 159 fail: 0
Qemu test results:
	total: 345 pass: 345 fail: 0

Guenter

Re: [PATCH 4.20 000/171] 4.20.16-stable review

[Greg Kroah-Hartman]

On Wed, Mar 13, 2019 at 05:36:36PM +0000, Jon Hunter wrote:
> 
> On 12/03/2019 17:06, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.20.16 release.
> > There are 171 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu Mar 14 17:02:23 UTC 2019.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.16-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> 
> All tests passing for Tegra ...
> 
> Test results for stable-v4.20:
>     11 builds:	11 pass, 0 fail
>     22 boots:	22 pass, 0 fail
>     28 tests:	28 pass, 0 fail
> 
> Linux version:	4.20.16-rc1-gdcd2fdc
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra30-cardhu-a04
> 

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.20 000/171] 4.20.16-stable review

[Greg Kroah-Hartman]

On Wed, Mar 13, 2019 at 05:24:09PM +0530, Naresh Kamboju wrote:
> On Tue, 12 Mar 2019 at 22:42, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 4.20.16 release.
> > There are 171 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Mar 14 17:02:23 UTC 2019.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.16-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.20 105/171] net: stmmac: Send TSO packets always from Queue 0

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2565 bytes --]

On Tue, 2019-03-12 at 10:08 -0700, Greg Kroah-Hartman wrote:
> 4.20-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> [ Upstream commit c5acdbee22a1b200dde07effd26fd1f649e9ab8a ]
> 
> The number of TSO enabled channels in HW can be different than the
> number of total channels. There is no way to determined, at runtime, the
> number of TSO capable channels and its safe to assume that if TSO is
> enabled then at least channel 0 will be TSO capable.
> 
> Lets always send TSO packets from Queue 0.
> 
> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> Cc: Joao Pinto <jpinto@synopsys.com>
> Cc: David S. Miller <davem@davemloft.net>
> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> Cc: Alexandre Torgue <alexandre.torgue@st.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 5d83d6a7694b..f76f6ae3fa87 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -3033,8 +3033,17 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
>  
>  	/* Manage oversized TCP frames for GMAC4 device */
>  	if (skb_is_gso(skb) && priv->tso) {
> -		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))
> +		if (skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
> +			/*
> +			 * There is no way to determine the number of TSO
> +			 * capable Queues. Let's use always the Queue 0
> +			 * because if TSO is supported then at least this
> +			 * one will be capable.
> +			 */
> +			skb_set_queue_mapping(skb, 0);

This is the wrong place to change the queue mapping.  stmmac_xmit() is
called with a specific TX queue locked, and accessing a different TX
queue results in a data race for all of that queue's state.

I think this commit should be reverted upstream and in all stable
branches.  Instead, the driver should implement the ndo_select_queue
operation and override the queue mapping there.

Ben.

>  			return stmmac_tso_xmit(skb, dev);
> +		}
>  	}
>  
>  	if (unlikely(stmmac_tx_avail(priv, queue) < nfrags + 1)) {
-- 
Ben Hutchings
If God had intended Man to program,
we'd have been born with serial I/O ports.



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]