linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: "Johnson CH Chen (陳昭勳)" <JohnsonCH.Chen@moxa.com>
Cc: "claudiu.manoil@nxp.com" <claudiu.manoil@nxp.com>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"zero19850401@gmail.com" <zero19850401@gmail.com>
Subject: Re: [PATCH] gianfar: Solve ethernet TX/RX problems for ls1021a
Date: Tue, 7 Jan 2020 17:49:12 +0200	[thread overview]
Message-ID: <CA+h21hpERd-yko+X9G-D9eFwu3LVq625qDUYvNGtEA8Ere_vYw@mail.gmail.com> (raw)
In-Reply-To: <HK0PR01MB3521C806FE109E04FA72858CFA3F0@HK0PR01MB3521.apcprd01.prod.exchangelabs.com>

Hi Chen,

On Tue, 7 Jan 2020 at 12:37, Johnson CH Chen (陳昭勳)
<JohnsonCH.Chen@moxa.com> wrote:
>
> Add dma_endian_le to solve ethernet TX/RX problems for freescale ls1021a. Without this, it will result in
> rx-busy-errors by ethtool, and transmit queue timeout in ls1021a's platforms.
>
> Signed-off-by: Johnson Chen <johnsonch.chen@moxa.com>
> ---

This patch is not valid. The endianness configuration in
eTSECx_DMACTRL is reserved and not applicable.
What is the value of SCFG_ETSECDMAMCR bits ETSEC_BD and ETSEC_FR_DATA
on your board? Typically this is configured by the bootloader.

>  drivers/net/ethernet/freescale/gianfar.c | 3 +++
>  drivers/net/ethernet/freescale/gianfar.h | 4 ++++
>  2 files changed, 7 insertions(+)
>
> diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
> index 72868a28b621..ab4e45199df9 100644
> --- a/drivers/net/ethernet/freescale/gianfar.c
> +++ b/drivers/net/ethernet/freescale/gianfar.c
> @@ -833,6 +833,7 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
>
>         /* Find the TBI PHY.  If it's not there, we don't support SGMII */
>         priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
> +       priv->dma_endian_le = of_property_read_bool(np, "fsl,dma-endian-le");
>
>         return 0;
>
> @@ -1209,6 +1210,8 @@ static void gfar_start(struct gfar_private *priv)
>         /* Initialize DMACTRL to have WWR and WOP */
>         tempval = gfar_read(&regs->dmactrl);
>         tempval |= DMACTRL_INIT_SETTINGS;
> +       if (priv->dma_endian_le)
> +               tempval |= DMACTRL_LE;
>         gfar_write(&regs->dmactrl, tempval);
>
>         /* Make sure we aren't stopped */
> diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
> index 432c6a818ae5..aae07db5206b 100644
> --- a/drivers/net/ethernet/freescale/gianfar.h
> +++ b/drivers/net/ethernet/freescale/gianfar.h
> @@ -215,6 +215,7 @@ extern const char gfar_driver_version[];
>  #define DMACTRL_INIT_SETTINGS   0x000000c3
>  #define DMACTRL_GRS             0x00000010
>  #define DMACTRL_GTS             0x00000008
> +#define DMACTRL_LE             0x00008000
>
>  #define TSTAT_CLEAR_THALT_ALL  0xFF000000
>  #define TSTAT_CLEAR_THALT      0x80000000
> @@ -1140,6 +1141,9 @@ struct gfar_private {
>                 tx_pause_en:1,
>                 rx_pause_en:1;
>
> +       /* little endian dma buffer and descriptor host interface */
> +       unsigned int dma_endian_le;
> +
>         /* The total tx and rx ring size for the enabled queues */
>         unsigned int total_tx_ring_size;
>         unsigned int total_rx_ring_size;
> --
> 2.11.0
>
> Best regards,
> Johnson

Regards,
-Vladimir

  parent reply	other threads:[~2020-01-07 15:49 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07 10:36 [PATCH] gianfar: Solve ethernet TX/RX problems for ls1021a Johnson CH Chen (陳昭勳)
2020-01-07 13:21 ` Andrew Lunn
2020-01-07 14:17   ` Fabio Estevam
2020-01-08  5:26     ` Johnson CH Chen (陳昭勳)
2020-01-07 15:49 ` Vladimir Oltean [this message]
2020-01-08  7:15   ` Johnson CH Chen (陳昭勳)
2020-01-08 16:30     ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA+h21hpERd-yko+X9G-D9eFwu3LVq625qDUYvNGtEA8Ere_vYw@mail.gmail.com \
    --to=olteanv@gmail.com \
    --cc=JohnsonCH.Chen@moxa.com \
    --cc=claudiu.manoil@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=zero19850401@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).