[PATCH] pinctrl: tegra: Use noirq suspend/resume callbacks

[PATCH] pinctrl: tegra: Use noirq suspend/resume callbacks

[Vidya Sagar]

Use noirq suspend/resume callbacks as other drivers which implement
noirq suspend/resume callbacks (Ex:- PCIe) depend on pinctrl driver to
configure the signals used by their respective devices in the noirq phase.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
 drivers/pinctrl/tegra/pinctrl-tegra.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
index 21661f6490d6..195cfe557511 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
@@ -731,8 +731,8 @@ static int tegra_pinctrl_resume(struct device *dev)
 }
 
 const struct dev_pm_ops tegra_pinctrl_pm = {
-	.suspend = &tegra_pinctrl_suspend,
-	.resume = &tegra_pinctrl_resume
+	.suspend_noirq = &tegra_pinctrl_suspend,
+	.resume_noirq = &tegra_pinctrl_resume
 };
 
 static bool tegra_pinctrl_gpio_node_has_range(struct tegra_pmx *pmx)
-- 
2.17.1

Re: [PATCH] pinctrl: tegra: Use noirq suspend/resume callbacks

[Dmitry Osipenko]

04.06.2020 20:49, Vidya Sagar пишет:
> Use noirq suspend/resume callbacks as other drivers which implement
> noirq suspend/resume callbacks (Ex:- PCIe) depend on pinctrl driver to
> configure the signals used by their respective devices in the noirq phase.
> 
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
>  drivers/pinctrl/tegra/pinctrl-tegra.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
> index 21661f6490d6..195cfe557511 100644
> --- a/drivers/pinctrl/tegra/pinctrl-tegra.c
> +++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
> @@ -731,8 +731,8 @@ static int tegra_pinctrl_resume(struct device *dev)
>  }
>  
>  const struct dev_pm_ops tegra_pinctrl_pm = {
> -	.suspend = &tegra_pinctrl_suspend,
> -	.resume = &tegra_pinctrl_resume
> +	.suspend_noirq = &tegra_pinctrl_suspend,
> +	.resume_noirq = &tegra_pinctrl_resume
>  };
>  
>  static bool tegra_pinctrl_gpio_node_has_range(struct tegra_pmx *pmx)
> 

That's a good catch! Perhaps I2C on later Tegra SoCs also should suffer
similarly to the PCIe.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>

Re: [PATCH] pinctrl: tegra: Use noirq suspend/resume callbacks

[Linus Walleij]

On Thu, Jun 4, 2020 at 7:49 PM Vidya Sagar <vidyas@nvidia.com> wrote:

> Use noirq suspend/resume callbacks as other drivers which implement
> noirq suspend/resume callbacks (Ex:- PCIe) depend on pinctrl driver to
> configure the signals used by their respective devices in the noirq phase.
>
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>

Patch applied for fixes.

Yours,
Linus Walleij