[PATCH v5 0/4] printk: replace ringbuffer

[PATCH v5 0/4] printk: replace ringbuffer

[John Ogness]

Hello,

Here is a v5 for the first series to rework the printk
subsystem. The v4 is here [0]. This first series
only replaces the existing ringbuffer implementation. No locking
is removed. The semantics/behavior of printk are kept the same
except for a minor optimization that is reverted (patch 3).

RFC patches for various userspace tools to dump the kernel log
are available: crash [1], makedumpfile [2], kexec-tools [3].

This series is based on v5.8-rc4.

The list of changes since v4:

printk_ringbuffer
=================

- added new prb_first_valid_seq() for readers to retrieve the
  oldest valid sequence number

- prb_first_seq(): now static

printk.c
========

- devkmsg_read(): fixed returning EPIPE on buffer wrap [4]

- setup_log_buf(): fixed printk conversion specifier [5]

- replace all prb_first_seq() usage with the new
  prb_first_valid_seq() (because that is what the readers are
  actually interested in)

[0] https://lkml.kernel.org/r/20200707145932.8752-1-john.ogness@linutronix.de
[1] https://github.com/Linutronix/crash.git (printk branch)
[2] https://github.com/Linutronix/makedumpfile.git (printk branch)
[3] https://github.com/Linutronix/kexec-tools.git (printk branch)
[4] https://lkml.kernel.org/r/87zh89kkek.fsf@jogness.linutronix.de
[5] https://lkml.kernel.org/r/87r1tmcfhf.fsf@jogness.linutronix.de

John Ogness (4):
  crash: add VMCOREINFO macro to define offset in a struct declared by
    typedef
  printk: add lockless ringbuffer
  Revert "printk: lock/unlock console only for new logbuf entries"
  printk: use the lockless ringbuffer

 include/linux/crash_core.h        |    3 +
 kernel/printk/Makefile            |    1 +
 kernel/printk/printk.c            |  950 ++++++++--------
 kernel/printk/printk_ringbuffer.c | 1687 +++++++++++++++++++++++++++++
 kernel/printk/printk_ringbuffer.h |  399 +++++++
 5 files changed, 2586 insertions(+), 454 deletions(-)
 create mode 100644 kernel/printk/printk_ringbuffer.c
 create mode 100644 kernel/printk/printk_ringbuffer.h

-- 
2.20.1

[PATCH v5 1/4] crash: add VMCOREINFO macro to define offset in a struct declared by typedef

[John Ogness]

The existing macro VMCOREINFO_OFFSET() can't be used for structures
declared via typedef because "struct" is not part of type definition.

Create another macro for this purpose.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 include/linux/crash_core.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/linux/crash_core.h b/include/linux/crash_core.h
index 525510a9f965..43b51c9df571 100644
--- a/include/linux/crash_core.h
+++ b/include/linux/crash_core.h
@@ -53,6 +53,9 @@ phys_addr_t paddr_vmcoreinfo_note(void);
 #define VMCOREINFO_OFFSET(name, field) \
 	vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \
 			      (unsigned long)offsetof(struct name, field))
+#define VMCOREINFO_TYPE_OFFSET(name, field) \
+	vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \
+			      (unsigned long)offsetof(name, field))
 #define VMCOREINFO_LENGTH(name, value) \
 	vmcoreinfo_append_str("LENGTH(%s)=%lu\n", #name, (unsigned long)value)
 #define VMCOREINFO_NUMBER(name) \
-- 
2.20.1

[PATCH v5 2/4] printk: add lockless ringbuffer

[John Ogness]

Introduce a multi-reader multi-writer lockless ringbuffer for storing
the kernel log messages. Readers and writers may use their API from
any context (including scheduler and NMI). This ringbuffer will make
it possible to decouple printk() callers from any context, locking,
or console constraints. It also makes it possible for readers to have
full access to the ringbuffer contents at any time and context (for
example from any panic situation).

The printk_ringbuffer is made up of 3 internal ringbuffers:

desc_ring:
A ring of descriptors. A descriptor contains all record meta data
(sequence number, timestamp, loglevel, etc.) as well as internal state
information about the record and logical positions specifying where in
the other ringbuffers the text and dictionary strings are located.

text_data_ring:
A ring of data blocks. A data block consists of an unsigned long
integer (ID) that maps to a desc_ring index followed by the text
string of the record.

dict_data_ring:
A ring of data blocks. A data block consists of an unsigned long
integer (ID) that maps to a desc_ring index followed by the dictionary
string of the record.

The internal state information of a descriptor is the key element to
allow readers and writers to locklessly synchronize access to the data.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Co-developed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
---
 kernel/printk/Makefile            |    1 +
 kernel/printk/printk_ringbuffer.c | 1687 +++++++++++++++++++++++++++++
 kernel/printk/printk_ringbuffer.h |  399 +++++++
 3 files changed, 2087 insertions(+)
 create mode 100644 kernel/printk/printk_ringbuffer.c
 create mode 100644 kernel/printk/printk_ringbuffer.h

diff --git a/kernel/printk/Makefile b/kernel/printk/Makefile
index 4d052fc6bcde..eee3dc9b60a9 100644
--- a/kernel/printk/Makefile
+++ b/kernel/printk/Makefile
@@ -2,3 +2,4 @@
 obj-y	= printk.o
 obj-$(CONFIG_PRINTK)	+= printk_safe.o
 obj-$(CONFIG_A11Y_BRAILLE_CONSOLE)	+= braille.o
+obj-$(CONFIG_PRINTK)	+= printk_ringbuffer.o
diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c
new file mode 100644
index 000000000000..7355ca99e852
--- /dev/null
+++ b/kernel/printk/printk_ringbuffer.c
@@ -0,0 +1,1687 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/bug.h>
+#include "printk_ringbuffer.h"
+
+/**
+ * DOC: printk_ringbuffer overview
+ *
+ * Data Structure
+ * --------------
+ * The printk_ringbuffer is made up of 3 internal ringbuffers:
+ *
+ *   desc_ring
+ *     A ring of descriptors. A descriptor contains all record meta data
+ *     (sequence number, timestamp, loglevel, etc.) as well as internal state
+ *     information about the record and logical positions specifying where in
+ *     the other ringbuffers the text and dictionary strings are located.
+ *
+ *   text_data_ring
+ *     A ring of data blocks. A data block consists of an unsigned long
+ *     integer (ID) that maps to a desc_ring index followed by the text
+ *     string of the record.
+ *
+ *   dict_data_ring
+ *     A ring of data blocks. A data block consists of an unsigned long
+ *     integer (ID) that maps to a desc_ring index followed by the dictionary
+ *     string of the record.
+ *
+ * The internal state information of a descriptor is the key element to allow
+ * readers and writers to locklessly synchronize access to the data.
+ *
+ * Implementation
+ * --------------
+ *
+ * Descriptor Ring
+ * ~~~~~~~~~~~~~~~
+ * The descriptor ring is an array of descriptors. A descriptor contains all
+ * the meta data of a printk record as well as blk_lpos structs pointing to
+ * associated text and dictionary data blocks (see "Data Rings" below). Each
+ * descriptor is assigned an ID that maps directly to index values of the
+ * descriptor array and has a state. The ID and the state are bitwise combined
+ * into a single descriptor field named @state_var, allowing ID and state to
+ * be synchronously and atomically updated.
+ *
+ * Descriptors have three states:
+ *
+ *   reserved
+ *     A writer is modifying the record.
+ *
+ *   committed
+ *     The record and all its data are complete and available for reading.
+ *
+ *   reusable
+ *     The record exists, but its text and/or dictionary data may no longer
+ *     be available.
+ *
+ * Querying the @state_var of a record requires providing the ID of the
+ * descriptor to query. This can yield a possible fourth (pseudo) state:
+ *
+ *   miss
+ *     The descriptor being queried has an unexpected ID.
+ *
+ * The descriptor ring has a @tail_id that contains the ID of the oldest
+ * descriptor and @head_id that contains the ID of the newest descriptor.
+ *
+ * When a new descriptor should be created (and the ring is full), the tail
+ * descriptor is invalidated by first transitioning to the reusable state and
+ * then invalidating all tail data blocks up to and including the data blocks
+ * associated with the tail descriptor (for text and dictionary rings). Then
+ * @tail_id is advanced, followed by advancing @head_id. And finally the
+ * @state_var of the new descriptor is initialized to the new ID and reserved
+ * state.
+ *
+ * The @tail_id can only be advanced if the new @tail_id would be in the
+ * committed or reusable queried state. This makes it possible that a valid
+ * sequence number of the tail is always available.
+ *
+ * Data Rings
+ * ~~~~~~~~~~
+ * The two data rings (text and dictionary) function identically. They exist
+ * separately so that their buffer sizes can be individually set and they do
+ * not affect one another.
+ *
+ * Data rings are byte arrays composed of data blocks. Data blocks are
+ * referenced by blk_lpos structs that point to the logical position of the
+ * beginning of a data block and the beginning of the next adjacent data
+ * block. Logical positions are mapped directly to index values of the byte
+ * array ringbuffer.
+ *
+ * Each data block consists of an ID followed by the writer data. The ID is
+ * the identifier of a descriptor that is associated with the data block. A
+ * given data block is considered valid if all of the following conditions
+ * are met:
+ *
+ *   1) The descriptor associated with the data block is in the committed
+ *      queried state.
+ *
+ *   2) The blk_lpos struct within the descriptor associated with the data
+ *      block references back to the same data block.
+ *
+ *   3) The data block is within the head/tail logical position range.
+ *
+ * If the writer data of a data block would extend beyond the end of the
+ * byte array, only the ID of the data block is stored at the logical
+ * position and the full data block (ID and writer data) is stored at the
+ * beginning of the byte array. The referencing blk_lpos will point to the
+ * ID before the wrap and the next data block will be at the logical
+ * position adjacent the full data block after the wrap.
+ *
+ * Data rings have a @tail_lpos that points to the beginning of the oldest
+ * data block and a @head_lpos that points to the logical position of the
+ * next (not yet existing) data block.
+ *
+ * When a new data block should be created (and the ring is full), tail data
+ * blocks will first be invalidated by putting their associated descriptors
+ * into the reusable state and then pushing the @tail_lpos forward beyond
+ * them. Then the @head_lpos is pushed forward and is associated with a new
+ * descriptor. If a data block is not valid, the @tail_lpos cannot be
+ * advanced beyond it.
+ *
+ * Usage
+ * -----
+ * Here are some simple examples demonstrating writers and readers. For the
+ * examples a global ringbuffer (test_rb) is available (which is not the
+ * actual ringbuffer used by printk)::
+ *
+ *	DEFINE_PRINTKRB(test_rb, 15, 5, 3);
+ *
+ * This ringbuffer allows up to 32768 records (2 ^ 15) and has a size of
+ * 1 MiB (2 ^ (15 + 5)) for text data and 256 KiB (2 ^ (15 + 3)) for
+ * dictionary data.
+ *
+ * Sample writer code::
+ *
+ *	const char *dictstr = "dictionary text";
+ *	const char *textstr = "message text";
+ *	struct prb_reserved_entry e;
+ *	struct printk_record r;
+ *
+ *	// specify how much to allocate
+ *	prb_rec_init_wr(&r, strlen(textstr) + 1, strlen(dictstr) + 1);
+ *
+ *	if (prb_reserve(&e, &test_rb, &r)) {
+ *		snprintf(r.text_buf, r.text_buf_size, "%s", textstr);
+ *
+ *		// dictionary allocation may have failed
+ *		if (r.dict_buf)
+ *			snprintf(r.dict_buf, r.dict_buf_size, "%s", dictstr);
+ *
+ *		r.info->ts_nsec = local_clock();
+ *
+ *		prb_commit(&e);
+ *	}
+ *
+ * Sample reader code::
+ *
+ *	struct printk_info info;
+ *	struct printk_record r;
+ *	char text_buf[32];
+ *	char dict_buf[32];
+ *	u64 seq;
+ *
+ *	prb_rec_init_rd(&r, &info, &text_buf[0], sizeof(text_buf),
+ *			&dict_buf[0], sizeof(dict_buf));
+ *
+ *	prb_for_each_record(0, &test_rb, &seq, &r) {
+ *		if (info.seq != seq)
+ *			pr_warn("lost %llu records\n", info.seq - seq);
+ *
+ *		if (info.text_len > r.text_buf_size) {
+ *			pr_warn("record %llu text truncated\n", info.seq);
+ *			text_buf[r.text_buf_size - 1] = 0;
+ *		}
+ *
+ *		if (info.dict_len > r.dict_buf_size) {
+ *			pr_warn("record %llu dict truncated\n", info.seq);
+ *			dict_buf[r.dict_buf_size - 1] = 0;
+ *		}
+ *
+ *		pr_info("%llu: %llu: %s;%s\n", info.seq, info.ts_nsec,
+ *			&text_buf[0], info.dict_len ? &dict_buf[0] : "");
+ *	}
+ *
+ * Note that additional less convenient reader functions are available to
+ * allow complex record access.
+ *
+ * ABA Issues
+ * ~~~~~~~~~~
+ * To help avoid ABA issues, descriptors are referenced by IDs (array index
+ * values combined with tagged bits counting array wraps) and data blocks are
+ * referenced by logical positions (array index values combined with tagged
+ * bits counting array wraps). However, on 32-bit systems the number of
+ * tagged bits is relatively small such that an ABA incident is (at least
+ * theoretically) possible. For example, if 4 million maximally sized (1KiB)
+ * printk messages were to occur in NMI context on a 32-bit system, the
+ * interrupted context would not be able to recognize that the 32-bit integer
+ * completely wrapped and thus represents a different data block than the one
+ * the interrupted context expects.
+ *
+ * To help combat this possibility, additional state checking is performed
+ * (such as using cmpxchg() even though set() would suffice). These extra
+ * checks are commented as such and will hopefully catch any ABA issue that
+ * a 32-bit system might experience.
+ *
+ * Memory Barriers
+ * ~~~~~~~~~~~~~~~
+ * Multiple memory barriers are used. To simplify proving correctness and
+ * generating litmus tests, lines of code related to memory barriers
+ * (loads, stores, and the associated memory barriers) are labeled::
+ *
+ *	LMM(function:letter)
+ *
+ * Comments reference the labels using only the "function:letter" part.
+ *
+ * The memory barrier pairs and their ordering are:
+ *
+ *   desc_reserve:D / desc_reserve:B
+ *     push descriptor tail (id), then push descriptor head (id)
+ *
+ *   desc_reserve:D / data_push_tail:B
+ *     push data tail (lpos), then set new descriptor reserved (state)
+ *
+ *   desc_reserve:D / desc_push_tail:C
+ *     push descriptor tail (id), then set new descriptor reserved (state)
+ *
+ *   desc_reserve:D / prb_first_seq:C
+ *     push descriptor tail (id), then set new descriptor reserved (state)
+ *
+ *   desc_reserve:F / desc_read:D
+ *     set new descriptor id and reserved (state), then allow writer changes
+ *
+ *   data_alloc:A / desc_read:D
+ *     set old descriptor reusable (state), then modify new data block area
+ *
+ *   data_alloc:A / data_push_tail:B
+ *     push data tail (lpos), then modify new data block area
+ *
+ *   prb_commit:B / desc_read:B
+ *     store writer changes, then set new descriptor committed (state)
+ *
+ *   data_push_tail:D / data_push_tail:A
+ *     set descriptor reusable (state), then push data tail (lpos)
+ *
+ *   desc_push_tail:B / desc_reserve:D
+ *     set descriptor reusable (state), then push descriptor tail (id)
+ */
+
+#define DATA_SIZE(data_ring)		_DATA_SIZE((data_ring)->size_bits)
+#define DATA_SIZE_MASK(data_ring)	(DATA_SIZE(data_ring) - 1)
+
+#define DESCS_COUNT(desc_ring)		_DESCS_COUNT((desc_ring)->count_bits)
+#define DESCS_COUNT_MASK(desc_ring)	(DESCS_COUNT(desc_ring) - 1)
+
+/* Determine the data array index from a logical position. */
+#define DATA_INDEX(data_ring, lpos)	((lpos) & DATA_SIZE_MASK(data_ring))
+
+/* Determine the desc array index from an ID or sequence number. */
+#define DESC_INDEX(desc_ring, n)	((n) & DESCS_COUNT_MASK(desc_ring))
+
+/* Determine how many times the data array has wrapped. */
+#define DATA_WRAPS(data_ring, lpos)	((lpos) >> (data_ring)->size_bits)
+
+/* Get the logical position at index 0 of the current wrap. */
+#define DATA_THIS_WRAP_START_LPOS(data_ring, lpos) \
+((lpos) & ~DATA_SIZE_MASK(data_ring))
+
+/* Get the ID for the same index of the previous wrap as the given ID. */
+#define DESC_ID_PREV_WRAP(desc_ring, id) \
+DESC_ID((id) - DESCS_COUNT(desc_ring))
+
+/*
+ * A data block: mapped directly to the beginning of the data block area
+ * specified as a logical position within the data ring.
+ *
+ * @id:   the ID of the associated descriptor
+ * @data: the writer data
+ *
+ * Note that the size of a data block is only known by its associated
+ * descriptor.
+ */
+struct prb_data_block {
+	unsigned long	id;
+	char		data[0];
+};
+
+/*
+ * Return the descriptor associated with @n. @n can be either a
+ * descriptor ID or a sequence number.
+ */
+static struct prb_desc *to_desc(struct prb_desc_ring *desc_ring, u64 n)
+{
+	return &desc_ring->descs[DESC_INDEX(desc_ring, n)];
+}
+
+static struct prb_data_block *to_block(struct prb_data_ring *data_ring,
+				       unsigned long begin_lpos)
+{
+	return (void *)&data_ring->data[DATA_INDEX(data_ring, begin_lpos)];
+}
+
+/*
+ * Increase the data size to account for data block meta data plus any
+ * padding so that the adjacent data block is aligned on the ID size.
+ */
+static unsigned int to_blk_size(unsigned int size)
+{
+	struct prb_data_block *db = NULL;
+
+	size += sizeof(*db);
+	size = ALIGN(size, sizeof(db->id));
+	return size;
+}
+
+/*
+ * Sanity checker for reserve size. The ringbuffer code assumes that a data
+ * block does not exceed the maximum possible size that could fit within the
+ * ringbuffer. This function provides that basic size check so that the
+ * assumption is safe.
+ *
+ * Writers are also not allowed to write 0-sized (data-less) records. Such
+ * records are used only internally by the ringbuffer.
+ */
+static bool data_check_size(struct prb_data_ring *data_ring, unsigned int size)
+{
+	struct prb_data_block *db = NULL;
+
+	/*
+	 * Writers are not allowed to write data-less records. Such records
+	 * are used only internally by the ringbuffer to denote records where
+	 * their data failed to allocate or have been lost.
+	 */
+	if (size == 0)
+		return false;
+
+	/*
+	 * Ensure the alignment padded size could possibly fit in the data
+	 * array. The largest possible data block must still leave room for
+	 * at least the ID of the next block.
+	 */
+	size = to_blk_size(size);
+	if (size > DATA_SIZE(data_ring) - sizeof(db->id))
+		return false;
+
+	return true;
+}
+
+/* The possible responses of a descriptor state-query. */
+enum desc_state {
+	desc_miss,	/* ID mismatch */
+	desc_reserved,	/* reserved, in use by writer */
+	desc_committed, /* committed, writer is done */
+	desc_reusable,	/* free, not yet used by any writer */
+};
+
+/* Query the state of a descriptor. */
+static enum desc_state get_desc_state(unsigned long id,
+				      unsigned long state_val)
+{
+	if (id != DESC_ID(state_val))
+		return desc_miss;
+
+	if (state_val & DESC_REUSE_MASK)
+		return desc_reusable;
+
+	if (state_val & DESC_COMMITTED_MASK)
+		return desc_committed;
+
+	return desc_reserved;
+}
+
+/*
+ * Get a copy of a specified descriptor and its queried state. A descriptor
+ * that is not in the committed or reusable state must be considered garbage
+ * by the reader.
+ */
+static enum desc_state desc_read(struct prb_desc_ring *desc_ring,
+				 unsigned long id, struct prb_desc *desc_out)
+{
+	struct prb_desc *desc = to_desc(desc_ring, id);
+	atomic_long_t *state_var = &desc->state_var;
+	enum desc_state d_state;
+	unsigned long state_val;
+
+	/* Check the descriptor state. */
+	state_val = atomic_long_read(state_var); /* LMM(desc_read:A) */
+	d_state = get_desc_state(id, state_val);
+	if (d_state != desc_committed && d_state != desc_reusable)
+		return d_state;
+
+	/*
+	 * Guarantee the state is loaded before copying the descriptor
+	 * content. This avoids copying obsolete descriptor content that might
+	 * not apply to the descriptor state. This pairs with prb_commit:B.
+	 *
+	 * Memory barrier involvement:
+	 *
+	 * If desc_read:A reads from prb_commit:B, then desc_read:C reads
+	 * from prb_commit:A.
+	 *
+	 * Relies on:
+	 *
+	 * WMB from prb_commit:A to prb_commit:B
+	 *    matching
+	 * RMB from desc_read:A to desc_read:C
+	 */
+	smp_rmb(); /* LMM(desc_read:B) */
+
+	/*
+	 * Copy the descriptor data. The data is not valid until the
+	 * state has been re-checked.
+	 */
+	memcpy(desc_out, desc, sizeof(*desc_out)); /* LMM(desc_read:C) */
+
+	/*
+	 * 1. Guarantee the descriptor content is loaded before re-checking
+	 *    the state. This avoids reading an obsolete descriptor state
+	 *    that may not apply to the copied content. This pairs with
+	 *    desc_reserve:F.
+	 *
+	 *    Memory barrier involvement:
+	 *
+	 *    If desc_read:C reads from desc_reserve:G, then desc_read:E
+	 *    reads from desc_reserve:F.
+	 *
+	 *    Relies on:
+	 *
+	 *    WMB from desc_reserve:F to desc_reserve:G
+	 *       matching
+	 *    RMB from desc_read:C to desc_read:E
+	 *
+	 * 2. Guarantee the record data is loaded before re-checking the
+	 *    state. This avoids reading an obsolete descriptor state that may
+	 *    not apply to the copied data. This pairs with data_alloc:A.
+	 *
+	 *    Memory barrier involvement:
+	 *
+	 *    If copy_data:A reads from data_alloc:B, then desc_read:E
+	 *    reads from desc_make_reusable:A.
+	 *
+	 *    Relies on:
+	 *
+	 *    MB from desc_make_reusable:A to data_alloc:B
+	 *       matching
+	 *    RMB from desc_read:C to desc_read:E
+	 *
+	 *    Note: desc_make_reusable:A and data_alloc:B can be different
+	 *          CPUs. However, the data_alloc:B CPU (which performs the
+	 *          full memory barrier) must have previously seen
+	 *          desc_make_reusable:A.
+	 */
+	smp_rmb(); /* LMM(desc_read:D) */
+
+	/* Re-check the descriptor state. */
+	state_val = atomic_long_read(state_var); /* LMM(desc_read:E) */
+	return get_desc_state(id, state_val);
+}
+
+/*
+ * Take a specified descriptor out of the committed state by attempting
+ * the transition from committed to reusable. Either this context or some
+ * other context will have been successful.
+ */
+static void desc_make_reusable(struct prb_desc_ring *desc_ring,
+			       unsigned long id)
+{
+	unsigned long val_committed = id | DESC_COMMITTED_MASK;
+	unsigned long val_reusable = val_committed | DESC_REUSE_MASK;
+	struct prb_desc *desc = to_desc(desc_ring, id);
+	atomic_long_t *state_var = &desc->state_var;
+
+	atomic_long_cmpxchg_relaxed(state_var, val_committed,
+				    val_reusable); /* LMM(desc_make_reusable:A) */
+}
+
+/*
+ * Given a data ring (text or dict), put the associated descriptor of each
+ * data block from @lpos_begin until @lpos_end into the reusable state.
+ *
+ * If there is any problem making the associated descriptor reusable, either
+ * the descriptor has not yet been committed or another writer context has
+ * already pushed the tail lpos past the problematic data block. Regardless,
+ * on error the caller can re-load the tail lpos to determine the situation.
+ */
+static bool data_make_reusable(struct printk_ringbuffer *rb,
+			       struct prb_data_ring *data_ring,
+			       unsigned long lpos_begin,
+			       unsigned long lpos_end,
+			       unsigned long *lpos_out)
+{
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
+	struct prb_data_blk_lpos *blk_lpos;
+	struct prb_data_block *blk;
+	enum desc_state d_state;
+	struct prb_desc desc;
+	unsigned long id;
+
+	/*
+	 * Using the provided @data_ring, point @blk_lpos to the correct
+	 * blk_lpos within the local copy of the descriptor.
+	 */
+	if (data_ring == &rb->text_data_ring)
+		blk_lpos = &desc.text_blk_lpos;
+	else
+		blk_lpos = &desc.dict_blk_lpos;
+
+	/* Loop until @lpos_begin has advanced to or beyond @lpos_end. */
+	while ((lpos_end - lpos_begin) - 1 < DATA_SIZE(data_ring)) {
+		blk = to_block(data_ring, lpos_begin);
+
+		/*
+		 * Load the block ID from the data block. This is a data race
+		 * against a writer that may have newly reserved this data
+		 * area. If the loaded value matches a valid descriptor ID,
+		 * the blk_lpos of that descriptor will be checked to make
+		 * sure it points back to this data block. If the check fails,
+		 * the data area has been recycled by another writer.
+		 */
+		id = blk->id; /* LMM(data_make_reusable:A) */
+
+		d_state = desc_read(desc_ring, id, &desc); /* LMM(data_make_reusable:B) */
+
+		switch (d_state) {
+		case desc_miss:
+			return false;
+		case desc_reserved:
+			return false;
+		case desc_committed:
+			/*
+			 * This data block is invalid if the descriptor
+			 * does not point back to it.
+			 */
+			if (blk_lpos->begin != lpos_begin)
+				return false;
+			desc_make_reusable(desc_ring, id);
+			break;
+		case desc_reusable:
+			/*
+			 * This data block is invalid if the descriptor
+			 * does not point back to it.
+			 */
+			if (blk_lpos->begin != lpos_begin)
+				return false;
+			break;
+		}
+
+		/* Advance @lpos_begin to the next data block. */
+		lpos_begin = blk_lpos->next;
+	}
+
+	*lpos_out = lpos_begin;
+	return true;
+}
+
+/*
+ * Advance the data ring tail to at least @lpos. This function puts
+ * descriptors into the reusable state if the tail is pushed beyond
+ * their associated data block.
+ */
+static bool data_push_tail(struct printk_ringbuffer *rb,
+			   struct prb_data_ring *data_ring,
+			   unsigned long lpos)
+{
+	unsigned long tail_lpos_new;
+	unsigned long tail_lpos;
+	unsigned long next_lpos;
+
+	/* If @lpos is not valid, there is nothing to do. */
+	if (lpos == INVALID_LPOS)
+		return true;
+
+	/*
+	 * Any descriptor states that have transitioned to reusable due to the
+	 * data tail being pushed to this loaded value will be visible to this
+	 * CPU. This pairs with data_push_tail:D.
+	 *
+	 * Memory barrier involvement:
+	 *
+	 * If data_push_tail:A reads from data_push_tail:D, then this CPU can
+	 * see desc_make_reusable:A.
+	 *
+	 * Relies on:
+	 *
+	 * MB from desc_make_reusable:A to data_push_tail:D
+	 *    matches
+	 * READFROM from data_push_tail:D to data_push_tail:A
+	 *    thus
+	 * READFROM from desc_make_reusable:A to this CPU
+	 */
+	tail_lpos = atomic_long_read(&data_ring->tail_lpos); /* LMM(data_push_tail:A) */
+
+	/*
+	 * Loop until the tail lpos is at or beyond @lpos. This condition
+	 * may already be satisfied, resulting in no full memory barrier
+	 * from data_push_tail:D being performed. However, since this CPU
+	 * sees the new tail lpos, any descriptor states that transitioned to
+	 * the reusable state must already be visible.
+	 */
+	while ((lpos - tail_lpos) - 1 < DATA_SIZE(data_ring)) {
+		/*
+		 * Make all descriptors reusable that are associated with
+		 * data blocks before @lpos.
+		 */
+		if (!data_make_reusable(rb, data_ring, tail_lpos, lpos,
+					&next_lpos)) {
+			/*
+			 * 1. Guarantee the block ID loaded in
+			 *    data_make_reusable() is performed before
+			 *    reloading the tail lpos. The failed
+			 *    data_make_reusable() may be due to a newly
+			 *    recycled data area causing the tail lpos to
+			 *    have been previously pushed. This pairs with
+			 *    data_alloc:A.
+			 *
+			 *    Memory barrier involvement:
+			 *
+			 *    If data_make_reusable:A reads from data_alloc:B,
+			 *    then data_push_tail:C reads from
+			 *    data_push_tail:D.
+			 *
+			 *    Relies on:
+			 *
+			 *    MB from data_push_tail:D to data_alloc:B
+			 *       matching
+			 *    RMB from data_make_reusable:A to
+			 *    data_push_tail:C
+			 *
+			 *    Note: data_push_tail:D and data_alloc:B can be
+			 *          different CPUs. However, the data_alloc:B
+			 *          CPU (which performs the full memory
+			 *          barrier) must have previously seen
+			 *          data_push_tail:D.
+			 *
+			 * 2. Guarantee the descriptor state loaded in
+			 *    data_make_reusable() is performed before
+			 *    reloading the tail lpos. The failed
+			 *    data_make_reusable() may be due to a newly
+			 *    recycled descriptor causing the tail lpos to
+			 *    have been previously pushed. This pairs with
+			 *    desc_reserve:D.
+			 *
+			 *    Memory barrier involvement:
+			 *
+			 *    If data_make_reusable:B reads from
+			 *    desc_reserve:F, then data_push_tail:C reads
+			 *    from data_push_tail:D.
+			 *
+			 *    Relies on:
+			 *
+			 *    MB from data_push_tail:D to desc_reserve:F
+			 *       matching
+			 *    RMB from data_make_reusable:B to
+			 *    data_push_tail:C
+			 *
+			 *    Note: data_push_tail:D and desc_reserve:F can
+			 *          be different CPUs. However, the
+			 *          desc_reserve:F CPU (which performs the
+			 *          full memory barrier) must have previously
+			 *          seen data_push_tail:D.
+			 */
+			smp_rmb(); /* LMM(data_push_tail:B) */
+
+			tail_lpos_new = atomic_long_read(&data_ring->tail_lpos
+							); /* LMM(data_push_tail:C) */
+			if (tail_lpos_new == tail_lpos)
+				return false;
+
+			/* Another CPU pushed the tail. Try again. */
+			tail_lpos = tail_lpos_new;
+			continue;
+		}
+
+		/*
+		 * Guarantee any descriptor states that have transitioned to
+		 * reusable are stored before pushing the tail lpos. A full
+		 * memory barrier is needed since other CPUs may have made
+		 * the descriptor states reusable. This pairs with
+		 * data_push_tail:A.
+		 */
+		if (atomic_long_try_cmpxchg(&data_ring->tail_lpos, &tail_lpos,
+					    next_lpos)) { /* LMM(data_push_tail:D) */
+			break;
+		}
+	}
+
+	return true;
+}
+
+/*
+ * Advance the desc ring tail. This function advances the tail by one
+ * descriptor, thus invalidating the oldest descriptor. Before advancing
+ * the tail, the tail descriptor is made reusable and all data blocks up to
+ * and including the descriptor's data block are invalidated (i.e. the data
+ * ring tail is pushed past the data block of the descriptor being made
+ * reusable).
+ */
+static bool desc_push_tail(struct printk_ringbuffer *rb,
+			   unsigned long tail_id)
+{
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
+	enum desc_state d_state;
+	struct prb_desc desc;
+
+	d_state = desc_read(desc_ring, tail_id, &desc);
+
+	switch (d_state) {
+	case desc_miss:
+		/*
+		 * If the ID is exactly 1 wrap behind the expected, it is
+		 * in the process of being reserved by another writer and
+		 * must be considered reserved.
+		 */
+		if (DESC_ID(atomic_long_read(&desc.state_var)) ==
+		    DESC_ID_PREV_WRAP(desc_ring, tail_id)) {
+			return false;
+		}
+
+		/*
+		 * The ID has changed. Another writer must have pushed the
+		 * tail and recycled the descriptor already. Success is
+		 * returned because the caller is only interested in the
+		 * specified tail being pushed, which it was.
+		 */
+		return true;
+	case desc_reserved:
+		return false;
+	case desc_committed:
+		desc_make_reusable(desc_ring, tail_id);
+		break;
+	case desc_reusable:
+		break;
+	}
+
+	/*
+	 * Data blocks must be invalidated before their associated
+	 * descriptor can be made available for recycling. Invalidating
+	 * them later is not possible because there is no way to trust
+	 * data blocks once their associated descriptor is gone.
+	 */
+
+	if (!data_push_tail(rb, &rb->text_data_ring, desc.text_blk_lpos.next))
+		return false;
+	if (!data_push_tail(rb, &rb->dict_data_ring, desc.dict_blk_lpos.next))
+		return false;
+
+	/*
+	 * Check the next descriptor after @tail_id before pushing the tail
+	 * to it because the tail must always be in a committed or reusable
+	 * state. The implementation of prb_first_seq() relies on this.
+	 *
+	 * A successful read implies that the next descriptor is less than or
+	 * equal to @head_id so there is no risk of pushing the tail past the
+	 * head.
+	 */
+	d_state = desc_read(desc_ring, DESC_ID(tail_id + 1), &desc); /* LMM(desc_push_tail:A) */
+
+	if (d_state == desc_committed || d_state == desc_reusable) {
+		/*
+		 * Guarantee any descriptor states that have transitioned to
+		 * reusable are stored before pushing the tail ID. This allows
+		 * verifying the recycled descriptor state. A full memory
+		 * barrier is needed since other CPUs may have made the
+		 * descriptor states reusable. This pairs with desc_reserve:D.
+		 */
+		atomic_long_cmpxchg(&desc_ring->tail_id, tail_id,
+				    DESC_ID(tail_id + 1)); /* LMM(desc_push_tail:B) */
+	} else {
+		/*
+		 * Guarantee the last state load from desc_read() is before
+		 * reloading @tail_id in order to see a new tail ID in the
+		 * case that the descriptor has been recycled. This pairs
+		 * with desc_reserve:D.
+		 *
+		 * Memory barrier involvement:
+		 *
+		 * If desc_push_tail:A reads from desc_reserve:F, then
+		 * desc_push_tail:D reads from desc_push_tail:B.
+		 *
+		 * Relies on:
+		 *
+		 * MB from desc_push_tail:B to desc_reserve:F
+		 *    matching
+		 * RMB from desc_push_tail:A to desc_push_tail:D
+		 *
+		 * Note: desc_push_tail:B and desc_reserve:F can be different
+		 *       CPUs. However, the desc_reserve:F CPU (which performs
+		 *       the full memory barrier) must have previously seen
+		 *       desc_push_tail:B.
+		 */
+		smp_rmb(); /* LMM(desc_push_tail:C) */
+
+		/*
+		 * Re-check the tail ID. The descriptor following @tail_id is
+		 * not in an allowed tail state. But if the tail has since
+		 * been moved by another CPU, then it does not matter.
+		 */
+		if (atomic_long_read(&desc_ring->tail_id) == tail_id) /* LMM(desc_push_tail:D) */
+			return false;
+	}
+
+	return true;
+}
+
+/* Reserve a new descriptor, invalidating the oldest if necessary. */
+static bool desc_reserve(struct printk_ringbuffer *rb, unsigned long *id_out)
+{
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
+	unsigned long prev_state_val;
+	unsigned long id_prev_wrap;
+	struct prb_desc *desc;
+	unsigned long head_id;
+	unsigned long id;
+
+	head_id = atomic_long_read(&desc_ring->head_id); /* LMM(desc_reserve:A) */
+
+	do {
+		desc = to_desc(desc_ring, head_id);
+
+		id = DESC_ID(head_id + 1);
+		id_prev_wrap = DESC_ID_PREV_WRAP(desc_ring, id);
+
+		/*
+		 * Guarantee the head ID is read before reading the tail ID.
+		 * Since the tail ID is updated before the head ID, this
+		 * guarantees that @id_prev_wrap is never ahead of the tail
+		 * ID. This pairs with desc_reserve:D.
+		 *
+		 * Memory barrier involvement:
+		 *
+		 * If desc_reserve:A reads from desc_reserve:D, then
+		 * desc_reserve:C reads from desc_push_tail:B.
+		 *
+		 * Relies on:
+		 *
+		 * MB from desc_push_tail:B to desc_reserve:D
+		 *    matching
+		 * RMB from desc_reserve:A to desc_reserve:C
+		 *
+		 * Note: desc_push_tail:B and desc_reserve:D can be different
+		 *       CPUs. However, the desc_reserve:D CPU (which performs
+		 *       the full memory barrier) must have previously seen
+		 *       desc_push_tail:B.
+		 */
+		smp_rmb(); /* LMM(desc_reserve:B) */
+
+		if (id_prev_wrap == atomic_long_read(&desc_ring->tail_id
+						    )) { /* LMM(desc_reserve:C) */
+			/*
+			 * Make space for the new descriptor by
+			 * advancing the tail.
+			 */
+			if (!desc_push_tail(rb, id_prev_wrap))
+				return false;
+		}
+
+		/*
+		 * 1. Guarantee the tail ID is read before validating the
+		 *    recycled descriptor state. A read memory barrier is
+		 *    sufficient for this. This pairs with desc_push_tail:B.
+		 *
+		 *    Memory barrier involvement:
+		 *
+		 *    If desc_reserve:C reads from desc_push_tail:B, then
+		 *    desc_reserve:E reads from desc_make_reusable:A.
+		 *
+		 *    Relies on:
+		 *
+		 *    MB from desc_make_reusable:A to desc_push_tail:B
+		 *       matching
+		 *    RMB from desc_reserve:C to desc_reserve:E
+		 *
+		 *    Note: desc_make_reusable:A and desc_push_tail:B can be
+		 *          different CPUs. However, the desc_push_tail:B CPU
+		 *          (which performs the full memory barrier) must have
+		 *          previously seen desc_make_reusable:A.
+		 *
+		 * 2. Guarantee the tail ID is stored before storing the head
+		 *    ID. This pairs with desc_reserve:B.
+		 *
+		 * 3. Guarantee any data ring tail changes are stored before
+		 *    recycling the descriptor. Data ring tail changes can
+		 *    happen via desc_push_tail()->data_push_tail(). A full
+		 *    memory barrier is needed since another CPU may have
+		 *    pushed the data ring tails. This pairs with
+		 *    data_push_tail:B.
+		 *
+		 * 4. Guarantee a new tail ID is stored before recycling the
+		 *    descriptor. A full memory barrier is needed since
+		 *    another CPU may have pushed the tail ID. This pairs
+		 *    with desc_push_tail:C and this also pairs with
+		 *    prb_first_seq:C.
+		 */
+	} while (!atomic_long_try_cmpxchg(&desc_ring->head_id, &head_id,
+					  id)); /* LMM(desc_reserve:D) */
+
+	desc = to_desc(desc_ring, id);
+
+	/*
+	 * If the descriptor has been recycled, verify the old state val.
+	 * See "ABA Issues" about why this verification is performed.
+	 */
+	prev_state_val = atomic_long_read(&desc->state_var); /* LMM(desc_reserve:E) */
+	if (prev_state_val &&
+	    prev_state_val != (id_prev_wrap | DESC_COMMITTED_MASK | DESC_REUSE_MASK)) {
+		WARN_ON_ONCE(1);
+		return false;
+	}
+
+	/*
+	 * Assign the descriptor a new ID and set its state to reserved.
+	 * See "ABA Issues" about why cmpxchg() instead of set() is used.
+	 *
+	 * Guarantee the new descriptor ID and state is stored before making
+	 * any other changes. A write memory barrier is sufficient for this.
+	 * This pairs with desc_read:D.
+	 */
+	if (!atomic_long_try_cmpxchg(&desc->state_var, &prev_state_val,
+				     id | 0)) { /* LMM(desc_reserve:F) */
+		WARN_ON_ONCE(1);
+		return false;
+	}
+
+	/* Now data in @desc can be modified: LMM(desc_reserve:G) */
+
+	*id_out = id;
+	return true;
+}
+
+/* Determine the end of a data block. */
+static unsigned long get_next_lpos(struct prb_data_ring *data_ring,
+				   unsigned long lpos, unsigned int size)
+{
+	unsigned long begin_lpos;
+	unsigned long next_lpos;
+
+	begin_lpos = lpos;
+	next_lpos = lpos + size;
+
+	/* First check if the data block does not wrap. */
+	if (DATA_WRAPS(data_ring, begin_lpos) == DATA_WRAPS(data_ring, next_lpos))
+		return next_lpos;
+
+	/* Wrapping data blocks store their data at the beginning. */
+	return (DATA_THIS_WRAP_START_LPOS(data_ring, next_lpos) + size);
+}
+
+/*
+ * Allocate a new data block, invalidating the oldest data block(s)
+ * if necessary. This function also associates the data block with
+ * a specified descriptor.
+ */
+static char *data_alloc(struct printk_ringbuffer *rb,
+			struct prb_data_ring *data_ring, unsigned int size,
+			struct prb_data_blk_lpos *blk_lpos, unsigned long id)
+{
+	struct prb_data_block *blk;
+	unsigned long begin_lpos;
+	unsigned long next_lpos;
+
+	if (size == 0) {
+		/* Specify a data-less block. */
+		blk_lpos->begin = INVALID_LPOS;
+		blk_lpos->next = INVALID_LPOS;
+		return NULL;
+	}
+
+	size = to_blk_size(size);
+
+	begin_lpos = atomic_long_read(&data_ring->head_lpos);
+
+	do {
+		next_lpos = get_next_lpos(data_ring, begin_lpos, size);
+
+		if (!data_push_tail(rb, data_ring, next_lpos - DATA_SIZE(data_ring))) {
+			/* Failed to allocate, specify a data-less block. */
+			blk_lpos->begin = INVALID_LPOS;
+			blk_lpos->next = INVALID_LPOS;
+			return NULL;
+		}
+
+		/*
+		 * 1. Guarantee any descriptor states that have transitioned
+		 *    to reusable are stored before modifying the newly
+		 *    allocated data area. A full memory barrier is needed
+		 *    since other CPUs may have made the descriptor states
+		 *    reusable. See data_push_tail:A about why the reusable
+		 *    states are visible. This pairs with desc_read:D.
+		 *
+		 * 2. Guarantee any updated tail lpos is stored before
+		 *    modifying the newly allocated data area. Another CPU may
+		 *    be in data_make_reusable() and is reading a block ID
+		 *    from this area. data_make_reusable() can handle reading
+		 *    a garbage block ID value, but then it must be able to
+		 *    load a new tail lpos. A full memory barrier is needed
+		 *    since other CPUs may have updated the tail lpos. This
+		 *    pairs with data_push_tail:B.
+		 */
+	} while (!atomic_long_try_cmpxchg(&data_ring->head_lpos, &begin_lpos,
+					  next_lpos)); /* LMM(data_alloc:A) */
+
+	blk = to_block(data_ring, begin_lpos);
+	blk->id = id; /* LMM(data_alloc:B) */
+
+	if (DATA_WRAPS(data_ring, begin_lpos) != DATA_WRAPS(data_ring, next_lpos)) {
+		/* Wrapping data blocks store their data at the beginning. */
+		blk = to_block(data_ring, 0);
+
+		/*
+		 * Store the ID on the wrapped block for consistency.
+		 * The printk_ringbuffer does not actually use it.
+		 */
+		blk->id = id;
+	}
+
+	blk_lpos->begin = begin_lpos;
+	blk_lpos->next = next_lpos;
+
+	return &blk->data[0];
+}
+
+/* Return the number of bytes used by a data block. */
+static unsigned int space_used(struct prb_data_ring *data_ring,
+			       struct prb_data_blk_lpos *blk_lpos)
+{
+	if (DATA_WRAPS(data_ring, blk_lpos->begin) == DATA_WRAPS(data_ring, blk_lpos->next)) {
+		/* Data block does not wrap. */
+		return (DATA_INDEX(data_ring, blk_lpos->next) -
+			DATA_INDEX(data_ring, blk_lpos->begin));
+	}
+
+	/*
+	 * For wrapping data blocks, the trailing (wasted) space is
+	 * also counted.
+	 */
+	return (DATA_INDEX(data_ring, blk_lpos->next) +
+		DATA_SIZE(data_ring) - DATA_INDEX(data_ring, blk_lpos->begin));
+}
+
+/**
+ * prb_reserve() - Reserve space in the ringbuffer.
+ *
+ * @e:  The entry structure to setup.
+ * @rb: The ringbuffer to reserve data in.
+ * @r:  The record structure to allocate buffers for.
+ *
+ * This is the public function available to writers to reserve data.
+ *
+ * The writer specifies the text and dict sizes to reserve by setting the
+ * @text_buf_size and @dict_buf_size fields of @r, respectively. Dictionaries
+ * are optional, so @dict_buf_size is allowed to be 0. To ensure proper
+ * initialization of @r, prb_rec_init_wr() should be used.
+ *
+ * Context: Any context. Disables local interrupts on success.
+ * Return: true if at least text data could be allocated, otherwise false.
+ *
+ * On success, the fields @info, @text_buf, @dict_buf of @r will be set by
+ * this function and should be filled in by the writer before committing. Also
+ * on success, prb_record_text_space() can be used on @e to query the actual
+ * space used for the text data block.
+ *
+ * If the function fails to reserve dictionary space (but all else succeeded),
+ * it will still report success. In that case @dict_buf is set to NULL and
+ * @dict_buf_size is set to 0. Writers must check this before writing to
+ * dictionary space.
+ *
+ * @info->text_len and @info->dict_len will already be set to @text_buf_size
+ * and @dict_buf_size, respectively. If dictionary space reservation fails,
+ * @info->dict_len is set to 0.
+ */
+bool prb_reserve(struct prb_reserved_entry *e, struct printk_ringbuffer *rb,
+		 struct printk_record *r)
+{
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
+	struct prb_desc *d;
+	unsigned long id;
+
+	if (!data_check_size(&rb->text_data_ring, r->text_buf_size))
+		goto fail;
+
+	/* Records are allowed to not have dictionaries. */
+	if (r->dict_buf_size) {
+		if (!data_check_size(&rb->dict_data_ring, r->dict_buf_size))
+			goto fail;
+	}
+
+	/*
+	 * Descriptors in the reserved state act as blockers to all further
+	 * reservations once the desc_ring has fully wrapped. Disable
+	 * interrupts during the reserve/commit window in order to minimize
+	 * the likelihood of this happening.
+	 */
+	local_irq_save(e->irqflags);
+
+	if (!desc_reserve(rb, &id)) {
+		/* Descriptor reservation failures are tracked. */
+		atomic_long_inc(&rb->fail);
+		local_irq_restore(e->irqflags);
+		goto fail;
+	}
+
+	d = to_desc(desc_ring, id);
+
+	/*
+	 * Set the @e fields here so that prb_commit() can be used if
+	 * text data allocation fails.
+	 */
+	e->rb = rb;
+	e->id = id;
+
+	/*
+	 * Initialize the sequence number if it has "never been set".
+	 * Otherwise just increment it by a full wrap.
+	 *
+	 * @seq is considered "never been set" if it has a value of 0,
+	 * _except_ for @descs[0], which was specially setup by the ringbuffer
+	 * initializer and therefore is always considered as set.
+	 *
+	 * See the "Bootstrap" comment block in printk_ringbuffer.h for
+	 * details about how the initializer bootstraps the descriptors.
+	 */
+	if (d->info.seq == 0 && DESC_INDEX(desc_ring, id) != 0)
+		d->info.seq = DESC_INDEX(desc_ring, id);
+	else
+		d->info.seq += DESCS_COUNT(desc_ring);
+
+	r->text_buf = data_alloc(rb, &rb->text_data_ring, r->text_buf_size,
+				 &d->text_blk_lpos, id);
+	/* If text data allocation fails, a data-less record is committed. */
+	if (r->text_buf_size && !r->text_buf) {
+		d->info.text_len = 0;
+		d->info.dict_len = 0;
+		prb_commit(e);
+		/* prb_commit() re-enabled interrupts. */
+		goto fail;
+	}
+
+	r->dict_buf = data_alloc(rb, &rb->dict_data_ring, r->dict_buf_size,
+				 &d->dict_blk_lpos, id);
+	/*
+	 * If dict data allocation fails, the caller can still commit
+	 * text. But dictionary information will not be available.
+	 */
+	if (r->dict_buf_size && !r->dict_buf)
+		r->dict_buf_size = 0;
+
+	r->info = &d->info;
+
+	/* Set default values for the sizes. */
+	d->info.text_len = r->text_buf_size;
+	d->info.dict_len = r->dict_buf_size;
+
+	/* Record full text space used by record. */
+	e->text_space = space_used(&rb->text_data_ring, &d->text_blk_lpos);
+
+	return true;
+fail:
+	/* Make it clear to the caller that the reserve failed. */
+	memset(r, 0, sizeof(*r));
+	return false;
+}
+
+/**
+ * prb_commit() - Commit (previously reserved) data to the ringbuffer.
+ *
+ * @e: The entry containing the reserved data information.
+ *
+ * This is the public function available to writers to commit data.
+ *
+ * Context: Any context. Enables local interrupts.
+ */
+void prb_commit(struct prb_reserved_entry *e)
+{
+	struct prb_desc_ring *desc_ring = &e->rb->desc_ring;
+	struct prb_desc *d = to_desc(desc_ring, e->id);
+	unsigned long prev_state_val = e->id | 0;
+
+	/* Now the writer has finished all writing: LMM(prb_commit:A) */
+
+	/*
+	 * Set the descriptor as committed. See "ABA Issues" about why
+	 * cmpxchg() instead of set() is used.
+	 *
+	 * Guarantee all record data is stored before the descriptor state
+	 * is stored as committed. A write memory barrier is sufficient for
+	 * this. This pairs with desc_read:B.
+	 */
+	if (!atomic_long_try_cmpxchg(&d->state_var, &prev_state_val,
+				     e->id | DESC_COMMITTED_MASK)) { /* LMM(prb_commit:B) */
+		WARN_ON_ONCE(1);
+	}
+
+	/* Restore interrupts, the reserve/commit window is finished. */
+	local_irq_restore(e->irqflags);
+}
+
+/*
+ * Given @blk_lpos, return a pointer to the writer data from the data block
+ * and calculate the size of the data part. A NULL pointer is returned if
+ * @blk_lpos specifies values that could never be legal.
+ *
+ * This function (used by readers) performs strict validation on the lpos
+ * values to possibly detect bugs in the writer code. A WARN_ON_ONCE() is
+ * triggered if an internal error is detected.
+ */
+static char *get_data(struct prb_data_ring *data_ring,
+		      struct prb_data_blk_lpos *blk_lpos,
+		      unsigned int *data_size)
+{
+	struct prb_data_block *db;
+
+	/* Data-less data block description. */
+	if (blk_lpos->begin == INVALID_LPOS &&
+	    blk_lpos->next == INVALID_LPOS) {
+		return NULL;
+	}
+
+	/* Regular data block: @begin less than @next and in same wrap. */
+	if (DATA_WRAPS(data_ring, blk_lpos->begin) == DATA_WRAPS(data_ring, blk_lpos->next) &&
+	    blk_lpos->begin < blk_lpos->next) {
+		db = to_block(data_ring, blk_lpos->begin);
+		*data_size = blk_lpos->next - blk_lpos->begin;
+
+	/* Wrapping data block: @begin is one wrap behind @next. */
+	} else if (DATA_WRAPS(data_ring, blk_lpos->begin + DATA_SIZE(data_ring)) ==
+		   DATA_WRAPS(data_ring, blk_lpos->next)) {
+		db = to_block(data_ring, 0);
+		*data_size = DATA_INDEX(data_ring, blk_lpos->next);
+
+	/* Illegal block description. */
+	} else {
+		WARN_ON_ONCE(1);
+		return NULL;
+	}
+
+	/* A valid data block will always be aligned to the ID size. */
+	if (WARN_ON_ONCE(blk_lpos->begin != ALIGN(blk_lpos->begin, sizeof(db->id))) ||
+	    WARN_ON_ONCE(blk_lpos->next != ALIGN(blk_lpos->next, sizeof(db->id)))) {
+		return NULL;
+	}
+
+	/* A valid data block will always have at least an ID. */
+	if (WARN_ON_ONCE(*data_size < sizeof(db->id)))
+		return NULL;
+
+	/* Subtract block ID space from size to reflect data size. */
+	*data_size -= sizeof(db->id);
+
+	return &db->data[0];
+}
+
+/*
+ * Count the number of lines in provided text. All text has at least 1 line
+ * (even if @text_size is 0). Each '\n' processed is counted as an additional
+ * line.
+ */
+static unsigned int count_lines(char *text, unsigned int text_size)
+{
+	unsigned int next_size = text_size;
+	unsigned int line_count = 1;
+	char *next = text;
+
+	while (next_size) {
+		next = memchr(next, '\n', next_size);
+		if (!next)
+			break;
+		line_count++;
+		next++;
+		next_size = text_size - (next - text);
+	}
+
+	return line_count;
+}
+
+/*
+ * Given @blk_lpos, copy an expected @len of data into the provided buffer.
+ * If @line_count is provided, count the number of lines in the data.
+ *
+ * This function (used by readers) performs strict validation on the data
+ * size to possibly detect bugs in the writer code. A WARN_ON_ONCE() is
+ * triggered if an internal error is detected.
+ */
+static bool copy_data(struct prb_data_ring *data_ring,
+		      struct prb_data_blk_lpos *blk_lpos, u16 len, char *buf,
+		      unsigned int buf_size, unsigned int *line_count)
+{
+	unsigned int data_size;
+	char *data;
+
+	/* Caller might not want any data. */
+	if ((!buf || !buf_size) && !line_count)
+		return true;
+
+	data = get_data(data_ring, blk_lpos, &data_size);
+	if (!data)
+		return false;
+
+	/*
+	 * Actual cannot be less than expected. It can be more than expected
+	 * because of the trailing alignment padding.
+	 */
+	if (WARN_ON_ONCE(data_size < (unsigned int)len)) {
+		pr_warn_once("wrong data size (%u, expecting %hu) for data: %.*s\n",
+			     data_size, len, data_size, data);
+		return false;
+	}
+
+	/* Caller interested in the line count? */
+	if (line_count)
+		*line_count = count_lines(data, data_size);
+
+	/* Caller interested in the data content? */
+	if (!buf || !buf_size)
+		return true;
+
+	data_size = min_t(u16, buf_size, len);
+
+	if (!WARN_ON_ONCE(!data_size))
+		memcpy(&buf[0], data, data_size); /* LMM(copy_data:A) */
+	return true;
+}
+
+/*
+ * This is an extended version of desc_read(). It gets a copy of a specified
+ * descriptor. However, it also verifies that the record is committed and has
+ * the sequence number @seq. On success, 0 is returned.
+ *
+ * Error return values:
+ * -EINVAL: A committed record with sequence number @seq does not exist.
+ * -ENOENT: A committed record with sequence number @seq exists, but its data
+ *          is not available. This is a valid record, so readers should
+ *          continue with the next record.
+ */
+static int desc_read_committed_seq(struct prb_desc_ring *desc_ring,
+				   unsigned long id, u64 seq,
+				   struct prb_desc *desc_out)
+{
+	struct prb_data_blk_lpos *blk_lpos = &desc_out->text_blk_lpos;
+	enum desc_state d_state;
+
+	d_state = desc_read(desc_ring, id, desc_out);
+
+	/*
+	 * An unexpected @id (desc_miss) or @seq mismatch means the record
+	 * does not exist. A descriptor in the reserved state means the
+	 * record does not yet exist for the reader.
+	 */
+	if (d_state == desc_miss ||
+	    d_state == desc_reserved ||
+	    desc_out->info.seq != seq) {
+		return -EINVAL;
+	}
+
+	/*
+	 * A descriptor in the reusable state may no longer have its data
+	 * available; report it as a data-less record. Or the record may
+	 * actually be a data-less record.
+	 */
+	if (d_state == desc_reusable ||
+	    (blk_lpos->begin == INVALID_LPOS && blk_lpos->next == INVALID_LPOS)) {
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+/*
+ * Copy the ringbuffer data from the record with @seq to the provided
+ * @r buffer. On success, 0 is returned.
+ *
+ * See desc_read_committed_seq() for error return values.
+ */
+static int prb_read(struct printk_ringbuffer *rb, u64 seq,
+		    struct printk_record *r, unsigned int *line_count)
+{
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
+	struct prb_desc *rdesc = to_desc(desc_ring, seq);
+	atomic_long_t *state_var = &rdesc->state_var;
+	struct prb_desc desc;
+	unsigned long id;
+	int err;
+
+	/* Extract the ID, used to specify the descriptor to read. */
+	id = DESC_ID(atomic_long_read(state_var));
+
+	/* Get a local copy of the correct descriptor (if available). */
+	err = desc_read_committed_seq(desc_ring, id, seq, &desc);
+
+	/*
+	 * If @r is NULL, the caller is only interested in the availability
+	 * of the record.
+	 */
+	if (err || !r)
+		return err;
+
+	/* If requested, copy meta data. */
+	if (r->info)
+		memcpy(r->info, &desc.info, sizeof(*(r->info)));
+
+	/* Copy text data. If it fails, this is a data-less record. */
+	if (!copy_data(&rb->text_data_ring, &desc.text_blk_lpos, desc.info.text_len,
+		       r->text_buf, r->text_buf_size, line_count)) {
+		return -ENOENT;
+	}
+
+	/*
+	 * Copy dict data. Although this should not fail, dict data is not
+	 * important. So if it fails, modify the copied meta data to report
+	 * that there is no dict data, thus silently dropping the dict data.
+	 */
+	if (!copy_data(&rb->dict_data_ring, &desc.dict_blk_lpos, desc.info.dict_len,
+		       r->dict_buf, r->dict_buf_size, NULL)) {
+		if (r->info)
+			r->info->dict_len = 0;
+	}
+
+	/* Ensure the record is still committed and has the same @seq. */
+	return desc_read_committed_seq(desc_ring, id, seq, &desc);
+}
+
+/* Get the sequence number of the tail descriptor. */
+static u64 prb_first_seq(struct printk_ringbuffer *rb)
+{
+	struct prb_desc_ring *desc_ring = &rb->desc_ring;
+	enum desc_state d_state;
+	struct prb_desc desc;
+	unsigned long id;
+
+	for (;;) {
+		id = atomic_long_read(&rb->desc_ring.tail_id); /* LMM(prb_first_seq:A) */
+
+		d_state = desc_read(desc_ring, id, &desc); /* LMM(prb_first_seq:B) */
+
+		/*
+		 * This loop will not be infinite because the tail is
+		 * _always_ in the committed or reusable state.
+		 */
+		if (d_state == desc_committed || d_state == desc_reusable)
+			break;
+
+		/*
+		 * Guarantee the last state load from desc_read() is before
+		 * reloading @tail_id in order to see a new tail in the case
+		 * that the descriptor has been recycled. This pairs with
+		 * desc_reserve:D.
+		 *
+		 * Memory barrier involvement:
+		 *
+		 * If prb_first_seq:B reads from desc_reserve:F, then
+		 * prb_first_seq:A reads from desc_push_tail:B.
+		 *
+		 * Relies on:
+		 *
+		 * MB from desc_push_tail:B to desc_reserve:F
+		 *    matching
+		 * RMB prb_first_seq:B to prb_first_seq:A
+		 */
+		smp_rmb(); /* LMM(prb_first_seq:C) */
+	}
+
+	return desc.info.seq;
+}
+
+/*
+ * Non-blocking read of a record. Updates @seq to the last committed record
+ * (which may have no data).
+ *
+ * See the description of prb_read_valid() and prb_read_valid_info()
+ * for details.
+ */
+static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
+			    struct printk_record *r, unsigned int *line_count)
+{
+	u64 tail_seq;
+	int err;
+
+	while ((err = prb_read(rb, *seq, r, line_count))) {
+		tail_seq = prb_first_seq(rb);
+
+		if (*seq < tail_seq) {
+			/*
+			 * Behind the tail. Catch up and try again. This
+			 * can happen for -ENOENT and -EINVAL cases.
+			 */
+			*seq = tail_seq;
+
+		} else if (err == -ENOENT) {
+			/* Record exists, but no data available. Skip. */
+			(*seq)++;
+
+		} else {
+			/* Non-existent/non-committed record. Must stop. */
+			return false;
+		}
+	}
+
+	return true;
+}
+
+/**
+ * prb_read_valid() - Non-blocking read of a requested record or (if gone)
+ *                    the next available record.
+ *
+ * @rb:  The ringbuffer to read from.
+ * @seq: The sequence number of the record to read.
+ * @r:   A record data buffer to store the read record to.
+ *
+ * This is the public function available to readers to read a record.
+ *
+ * The reader provides the @info, @text_buf, @dict_buf buffers of @r to be
+ * filled in. Any of the buffer pointers can be set to NULL if the reader
+ * is not interested in that data. To ensure proper initialization of @r,
+ * prb_rec_init_rd() should be used.
+ *
+ * Context: Any context.
+ * Return: true if a record was read, otherwise false.
+ *
+ * On success, the reader must check r->info.seq to see which record was
+ * actually read. This allows the reader to detect dropped records.
+ *
+ * Failure means @seq refers to a not yet written record.
+ */
+bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq,
+		    struct printk_record *r)
+{
+	return _prb_read_valid(rb, &seq, r, NULL);
+}
+
+/**
+ * prb_read_valid_info() - Non-blocking read of meta data for a requested
+ *                         record or (if gone) the next available record.
+ *
+ * @rb:         The ringbuffer to read from.
+ * @seq:        The sequence number of the record to read.
+ * @info:       A buffer to store the read record meta data to.
+ * @line_count: A buffer to store the number of lines in the record text.
+ *
+ * This is the public function available to readers to read only the
+ * meta data of a record.
+ *
+ * The reader provides the @info, @line_count buffers to be filled in.
+ * Either of the buffer pointers can be set to NULL if the reader is not
+ * interested in that data.
+ *
+ * Context: Any context.
+ * Return: true if a record's meta data was read, otherwise false.
+ *
+ * On success, the reader must check info->seq to see which record meta data
+ * was actually read. This allows the reader to detect dropped records.
+ *
+ * Failure means @seq refers to a not yet written record.
+ */
+bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq,
+			 struct printk_info *info, unsigned int *line_count)
+{
+	struct printk_record r;
+
+	prb_rec_init_rd(&r, info, NULL, 0, NULL, 0);
+
+	return _prb_read_valid(rb, &seq, &r, line_count);
+}
+
+/**
+ * prb_first_valid_seq() - Get the sequence number of the oldest available
+ *                         record.
+ *
+ * @rb: The ringbuffer to get the sequence number from.
+ *
+ * This is the public function available to readers to see what the
+ * first/oldest valid sequence number is.
+ *
+ * This provides readers a starting point to begin iterating the ringbuffer.
+ *
+ * Context: Any context.
+ * Return: The sequence number of the first/oldest record or, if the
+ *         ringbuffer is empty, 0 is returned.
+ */
+u64 prb_first_valid_seq(struct printk_ringbuffer *rb)
+{
+	u64 seq = 0;
+
+	if (!_prb_read_valid(rb, &seq, NULL, NULL))
+		return 0;
+
+	return seq;
+}
+
+/**
+ * prb_next_seq() - Get the sequence number after the last available record.
+ *
+ * @rb:  The ringbuffer to get the sequence number from.
+ *
+ * This is the public function available to readers to see what the next
+ * newest sequence number available to readers will be.
+ *
+ * This provides readers a sequence number to jump to if all currently
+ * available records should be skipped.
+ *
+ * Context: Any context.
+ * Return: The sequence number of the next newest (not yet available) record
+ *         for readers.
+ */
+u64 prb_next_seq(struct printk_ringbuffer *rb)
+{
+	u64 seq = 0;
+
+	/* Search forward from the oldest descriptor. */
+	while (_prb_read_valid(rb, &seq, NULL, NULL))
+		seq++;
+
+	return seq;
+}
+
+/**
+ * prb_init() - Initialize a ringbuffer to use provided external buffers.
+ *
+ * @rb:       The ringbuffer to initialize.
+ * @text_buf: The data buffer for text data.
+ * @textbits: The size of @text_buf as a power-of-2 value.
+ * @dict_buf: The data buffer for dictionary data.
+ * @dictbits: The size of @dict_buf as a power-of-2 value.
+ * @descs:    The descriptor buffer for ringbuffer records.
+ * @descbits: The count of @descs items as a power-of-2 value.
+ *
+ * This is the public function available to writers to setup a ringbuffer
+ * during runtime using provided buffers.
+ *
+ * This must match the initialization of DEFINE_PRINTKRB().
+ *
+ * Context: Any context.
+ */
+void prb_init(struct printk_ringbuffer *rb,
+	      char *text_buf, unsigned int textbits,
+	      char *dict_buf, unsigned int dictbits,
+	      struct prb_desc *descs, unsigned int descbits)
+{
+	memset(descs, 0, _DESCS_COUNT(descbits) * sizeof(descs[0]));
+
+	rb->desc_ring.count_bits = descbits;
+	rb->desc_ring.descs = descs;
+	atomic_long_set(&rb->desc_ring.head_id, DESC0_ID(descbits));
+	atomic_long_set(&rb->desc_ring.tail_id, DESC0_ID(descbits));
+
+	rb->text_data_ring.size_bits = textbits;
+	rb->text_data_ring.data = text_buf;
+	atomic_long_set(&rb->text_data_ring.head_lpos, BLK0_LPOS(textbits));
+	atomic_long_set(&rb->text_data_ring.tail_lpos, BLK0_LPOS(textbits));
+
+	rb->dict_data_ring.size_bits = dictbits;
+	rb->dict_data_ring.data = dict_buf;
+	atomic_long_set(&rb->dict_data_ring.head_lpos, BLK0_LPOS(dictbits));
+	atomic_long_set(&rb->dict_data_ring.tail_lpos, BLK0_LPOS(dictbits));
+
+	atomic_long_set(&rb->fail, 0);
+
+	descs[0].info.seq = -(u64)_DESCS_COUNT(descbits);
+
+	descs[_DESCS_COUNT(descbits) - 1].info.seq = 0;
+	atomic_long_set(&(descs[_DESCS_COUNT(descbits) - 1].state_var), DESC0_SV(descbits));
+	descs[_DESCS_COUNT(descbits) - 1].text_blk_lpos.begin = INVALID_LPOS;
+	descs[_DESCS_COUNT(descbits) - 1].text_blk_lpos.next = INVALID_LPOS;
+	descs[_DESCS_COUNT(descbits) - 1].dict_blk_lpos.begin = INVALID_LPOS;
+	descs[_DESCS_COUNT(descbits) - 1].dict_blk_lpos.next = INVALID_LPOS;
+}
+
+/**
+ * prb_record_text_space() - Query the full actual used ringbuffer space for
+ *                           the text data of a reserved entry.
+ *
+ * @e: The successfully reserved entry to query.
+ *
+ * This is the public function available to writers to see how much actual
+ * space is used in the ringbuffer to store the text data of the specified
+ * entry.
+ *
+ * This function is only valid if @e has been successfully reserved using
+ * prb_reserve().
+ *
+ * Context: Any context.
+ * Return: The size in bytes used by the text data of the associated record.
+ */
+unsigned int prb_record_text_space(struct prb_reserved_entry *e)
+{
+	return e->text_space;
+}
diff --git a/kernel/printk/printk_ringbuffer.h b/kernel/printk/printk_ringbuffer.h
new file mode 100644
index 000000000000..3e46a7423c13
--- /dev/null
+++ b/kernel/printk/printk_ringbuffer.h
@@ -0,0 +1,399 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _KERNEL_PRINTK_RINGBUFFER_H
+#define _KERNEL_PRINTK_RINGBUFFER_H
+
+#include <linux/atomic.h>
+
+/*
+ * Meta information about each stored message.
+ *
+ * All fields are set and used by the printk code except for
+ * @seq, @text_len, @dict_len, which are set and/or modified
+ * by the ringbuffer code.
+ */
+struct printk_info {
+	u64	seq;		/* sequence number */
+	u64	ts_nsec;	/* timestamp in nanoseconds */
+	u16	text_len;	/* length of text message */
+	u16	dict_len;	/* length of dictionary message */
+	u8	facility;	/* syslog facility */
+	u8	flags:5;	/* internal record flags */
+	u8	level:3;	/* syslog level */
+	u32	caller_id;	/* thread id or processor id */
+};
+
+/*
+ * A structure providing the buffers, used by writers and readers.
+ *
+ * Writers:
+ * Using prb_rec_init_wr(), a writer sets @text_buf_size and @dict_buf_size
+ * before calling prb_reserve(). On success, prb_reserve() sets @info,
+ * @text_buf, @dict_buf to buffers reserved for that writer.
+ *
+ * Readers:
+ * Using prb_rec_init_rd(), a reader sets all fields before calling
+ * prb_read_valid(). Note that the reader provides the @info, @text_buf,
+ * @dict_buf buffers. On success, the struct pointed to by @info will be
+ * filled and the char arrays pointed to by @text_buf and @dict_buf will
+ * be filled with text and dict data.
+ */
+struct printk_record {
+	struct printk_info	*info;
+	char			*text_buf;
+	char			*dict_buf;
+	unsigned int		text_buf_size;
+	unsigned int		dict_buf_size;
+};
+
+/* Specifies the logical position and span of a data block. */
+struct prb_data_blk_lpos {
+	unsigned long	begin;
+	unsigned long	next;
+};
+
+/*
+ * A descriptor: the complete meta-data for a record.
+ *
+ * @state_var: A bitwise combination of descriptor ID and descriptor state.
+ */
+struct prb_desc {
+	struct printk_info		info;
+	atomic_long_t			state_var;
+	struct prb_data_blk_lpos	text_blk_lpos;
+	struct prb_data_blk_lpos	dict_blk_lpos;
+};
+
+/* A ringbuffer of "ID + data" elements. */
+struct prb_data_ring {
+	unsigned int	size_bits;
+	char		*data;
+	atomic_long_t	head_lpos;
+	atomic_long_t	tail_lpos;
+};
+
+/* A ringbuffer of "struct prb_desc" elements. */
+struct prb_desc_ring {
+	unsigned int		count_bits;
+	struct prb_desc		*descs;
+	atomic_long_t		head_id;
+	atomic_long_t		tail_id;
+};
+
+/*
+ * The high level structure representing the printk ringbuffer.
+ *
+ * @fail: Count of failed prb_reserve() calls where not even a data-less
+ *        record was created.
+ */
+struct printk_ringbuffer {
+	struct prb_desc_ring	desc_ring;
+	struct prb_data_ring	text_data_ring;
+	struct prb_data_ring	dict_data_ring;
+	atomic_long_t		fail;
+};
+
+/*
+ * Used by writers as a reserve/commit handle.
+ *
+ * @rb:         Ringbuffer where the entry is reserved.
+ * @irqflags:   Saved irq flags to restore on entry commit.
+ * @id:         ID of the reserved descriptor.
+ * @text_space: Total occupied buffer space in the text data ring, including
+ *              ID, alignment padding, and wrapping data blocks.
+ *
+ * This structure is an opaque handle for writers. Its contents are only
+ * to be used by the ringbuffer implementation.
+ */
+struct prb_reserved_entry {
+	struct printk_ringbuffer	*rb;
+	unsigned long			irqflags;
+	unsigned long			id;
+	unsigned int			text_space;
+};
+
+#define _DATA_SIZE(sz_bits)		(1UL << (sz_bits))
+#define _DESCS_COUNT(ct_bits)		(1U << (ct_bits))
+#define DESC_SV_BITS			(sizeof(unsigned long) * 8)
+#define DESC_COMMITTED_MASK		(1UL << (DESC_SV_BITS - 1))
+#define DESC_REUSE_MASK			(1UL << (DESC_SV_BITS - 2))
+#define DESC_FLAGS_MASK			(DESC_COMMITTED_MASK | DESC_REUSE_MASK)
+#define DESC_ID_MASK			(~DESC_FLAGS_MASK)
+#define DESC_ID(sv)			((sv) & DESC_ID_MASK)
+#define INVALID_LPOS			1
+
+#define INVALID_BLK_LPOS	\
+{				\
+	.begin	= INVALID_LPOS,	\
+	.next	= INVALID_LPOS,	\
+}
+
+/*
+ * Descriptor Bootstrap
+ *
+ * The descriptor array is minimally initialized to allow immediate usage
+ * by readers and writers. The requirements that the descriptor array
+ * initialization must satisfy:
+ *
+ *   Req1
+ *     The tail must point to an existing (committed or reusable) descriptor.
+ *     This is required by the implementation of prb_first_seq().
+ *
+ *   Req2
+ *     Readers must see that the ringbuffer is initially empty.
+ *
+ *   Req3
+ *     The first record reserved by a writer is assigned sequence number 0.
+ *
+ * To satisfy Req1, the tail initially points to a descriptor that is
+ * minimally initialized (having no data block, i.e. data-less with the
+ * data block's lpos @begin and @next values set to INVALID_LPOS).
+ *
+ * To satisfy Req2, the initial tail descriptor is initialized to the
+ * reusable state. Readers recognize reusable descriptors as existing
+ * records, but skip over them.
+ *
+ * To satisfy Req3, the last descriptor in the array is used as the initial
+ * head (and tail) descriptor. This allows the first record reserved by a
+ * writer (head + 1) to be the first descriptor in the array. (Only the first
+ * descriptor in the array could have a valid sequence number of 0.)
+ *
+ * The first time a descriptor is reserved, it is assigned a sequence number
+ * with the value of the array index. A "first time reserved" descriptor can
+ * be recognized because it has a sequence number of 0 but does not have an
+ * index of 0. (Only the first descriptor in the array could have a valid
+ * sequence number of 0.) After the first reservation, all future reservations
+ * (recycling) simply involve incrementing the sequence number by the array
+ * count.
+ *
+ *   Hack #1
+ *     Only the first descriptor in the array is allowed to have the sequence
+ *     number 0. In this case it is not possible to recognize if it is being
+ *     reserved the first time (set to index value) or has been reserved
+ *     previously (increment by the array count). This is handled by _always_
+ *     incrementing the sequence number by the array count when reserving the
+ *     first descriptor in the array. In order to satisfy Req3, the sequence
+ *     number of the first descriptor in the array is initialized to minus
+ *     the array count. Then, upon the first reservation, it is incremented
+ *     to 0, thus satisfying Req3.
+ *
+ *   Hack #2
+ *     prb_first_seq() can be called at any time by readers to retrieve the
+ *     sequence number of the tail descriptor. However, due to Req2 and Req3,
+ *     initially there are no records to report the sequence number of
+ *     (sequence numbers are u64 and there is nothing less than 0). To handle
+ *     this, the sequence number of the initial tail descriptor is initialized
+ *     to 0. Technically this is incorrect, because there is no record with
+ *     sequence number 0 (yet) and the tail descriptor is not the first
+ *     descriptor in the array. But it allows prb_read_valid() to correctly
+ *     report the existence of a record for _any_ given sequence number at all
+ *     times. Bootstrapping is complete when the tail is pushed the first
+ *     time, thus finally pointing to the first descriptor reserved by a
+ *     writer, which has the assigned sequence number 0.
+ */
+
+/*
+ * Initiating Logical Value Overflows
+ *
+ * Both logical position (lpos) and ID values can be mapped to array indexes
+ * but may experience overflows during the lifetime of the system. To ensure
+ * that printk_ringbuffer can handle the overflows for these types, initial
+ * values are chosen that map to the correct initial array indexes, but will
+ * result in overflows soon.
+ *
+ *   BLK0_LPOS
+ *     The initial @head_lpos and @tail_lpos for data rings. It is at index
+ *     0 and the lpos value is such that it will overflow on the first wrap.
+ *
+ *   DESC0_ID
+ *     The initial @head_id and @tail_id for the desc ring. It is at the last
+ *     index of the descriptor array (see Req3 above) and the ID value is such
+ *     that it will overflow on the second wrap.
+ */
+#define BLK0_LPOS(sz_bits)	(-(_DATA_SIZE(sz_bits)))
+#define DESC0_ID(ct_bits)	DESC_ID(-(_DESCS_COUNT(ct_bits) + 1))
+#define DESC0_SV(ct_bits)	(DESC_COMMITTED_MASK | DESC_REUSE_MASK | DESC0_ID(ct_bits))
+
+/*
+ * Define a ringbuffer with an external text data buffer. The same as
+ * DEFINE_PRINTKRB() but requires specifying an external buffer for the
+ * text data.
+ *
+ * Note: The specified external buffer must be of the size:
+ *       2 ^ (descbits + avgtextbits)
+ */
+#define _DEFINE_PRINTKRB(name, descbits, avgtextbits, avgdictbits, text_buf)			\
+static char _##name##_dict[1U << ((avgdictbits) + (descbits))]					\
+			__aligned(__alignof__(unsigned long));					\
+static struct prb_desc _##name##_descs[_DESCS_COUNT(descbits)] = {				\
+	/* this will be the first record reserved by a writer */				\
+	[0] = {											\
+		.info = {									\
+			/* will be incremented to 0 on the first reservation */			\
+			.seq = -(u64)_DESCS_COUNT(descbits),					\
+		},										\
+	},											\
+	/* the initial head and tail */								\
+	[_DESCS_COUNT(descbits) - 1] = {							\
+		.info = {									\
+			/* reports the first seq value during the bootstrap phase */		\
+			.seq = 0,								\
+		},										\
+		/* reusable */									\
+		.state_var	= ATOMIC_INIT(DESC0_SV(descbits)),				\
+		/* no associated data block */							\
+		.text_blk_lpos	= INVALID_BLK_LPOS,						\
+		.dict_blk_lpos	= INVALID_BLK_LPOS,						\
+	},											\
+};												\
+static struct printk_ringbuffer name = {							\
+	.desc_ring = {										\
+		.count_bits	= descbits,							\
+		.descs		= &_##name##_descs[0],						\
+		.head_id	= ATOMIC_INIT(DESC0_ID(descbits)),				\
+		.tail_id	= ATOMIC_INIT(DESC0_ID(descbits)),				\
+	},											\
+	.text_data_ring = {									\
+		.size_bits	= (avgtextbits) + (descbits),					\
+		.data		= text_buf,							\
+		.head_lpos	= ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))),	\
+		.tail_lpos	= ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))),	\
+	},											\
+	.dict_data_ring = {									\
+		.size_bits	= (avgtextbits) + (descbits),					\
+		.data		= &_##name##_dict[0],						\
+		.head_lpos	= ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))),	\
+		.tail_lpos	= ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))),	\
+	},											\
+	.fail			= ATOMIC_LONG_INIT(0),						\
+}
+
+/**
+ * DEFINE_PRINTKRB() - Define a ringbuffer.
+ *
+ * @name:        The name of the ringbuffer variable.
+ * @descbits:    The number of descriptors as a power-of-2 value.
+ * @avgtextbits: The average text data size per record as a power-of-2 value.
+ * @avgdictbits: The average dictionary data size per record as a
+ *               power-of-2 value.
+ *
+ * This is a macro for defining a ringbuffer and all internal structures
+ * such that it is ready for immediate use. See _DEFINE_PRINTKRB() for a
+ * variant where the text data buffer can be specified externally.
+ */
+#define DEFINE_PRINTKRB(name, descbits, avgtextbits, avgdictbits)		\
+static char _##name##_text[1U << ((avgtextbits) + (descbits))]			\
+			__aligned(__alignof__(unsigned long));			\
+_DEFINE_PRINTKRB(name, descbits, avgtextbits, avgdictbits, &_##name##_text[0])
+
+/* Writer Interface */
+
+/**
+ * prb_rec_init_wd() - Initialize a buffer for writing records.
+ *
+ * @r:             The record to initialize.
+ * @text_buf_size: The needed text buffer size.
+ * @dict_buf_size: The needed dictionary buffer size.
+ *
+ * Initialize all the fields that a writer is interested in. If
+ * @dict_buf_size is 0, a dictionary buffer will not be reserved.
+ * @text_buf_size must be greater than 0.
+ *
+ * Note that although @dict_buf_size may be initialized to non-zero,
+ * its value must be rechecked after a successful call to prb_reserve()
+ * to verify a dictionary buffer was actually reserved. Dictionary buffer
+ * reservation is allowed to fail.
+ */
+static inline void prb_rec_init_wr(struct printk_record *r,
+				   unsigned int text_buf_size,
+				   unsigned int dict_buf_size)
+{
+	r->info = NULL;
+	r->text_buf = NULL;
+	r->dict_buf = NULL;
+	r->text_buf_size = text_buf_size;
+	r->dict_buf_size = dict_buf_size;
+}
+
+bool prb_reserve(struct prb_reserved_entry *e, struct printk_ringbuffer *rb,
+		 struct printk_record *r);
+void prb_commit(struct prb_reserved_entry *e);
+
+void prb_init(struct printk_ringbuffer *rb,
+	      char *text_buf, unsigned int text_buf_size,
+	      char *dict_buf, unsigned int dict_buf_size,
+	      struct prb_desc *descs, unsigned int descs_count_bits);
+unsigned int prb_record_text_space(struct prb_reserved_entry *e);
+
+/* Reader Interface */
+
+/**
+ * prb_rec_init_rd() - Initialize a buffer for reading records.
+ *
+ * @r:             The record to initialize.
+ * @info:          A buffer to store record meta-data.
+ * @text_buf:      A buffer to store text data.
+ * @text_buf_size: The size of @text_buf.
+ * @dict_buf:      A buffer to store dictionary data.
+ * @dict_buf_size: The size of @dict_buf.
+ *
+ * Initialize all the fields that a reader is interested in. All arguments
+ * (except @r) are optional. Only record data for arguments that are
+ * non-NULL or non-zero will be read.
+ */
+static inline void prb_rec_init_rd(struct printk_record *r,
+				   struct printk_info *info,
+				   char *text_buf, unsigned int text_buf_size,
+				   char *dict_buf, unsigned int dict_buf_size)
+{
+	r->info = info;
+	r->text_buf = text_buf;
+	r->dict_buf = dict_buf;
+	r->text_buf_size = text_buf_size;
+	r->dict_buf_size = dict_buf_size;
+}
+
+/**
+ * prb_for_each_record() - Iterate over the records of a ringbuffer.
+ *
+ * @from: The sequence number to begin with.
+ * @rb:   The ringbuffer to iterate over.
+ * @s:    A u64 to store the sequence number on each iteration.
+ * @r:    A printk_record to store the record on each iteration.
+ *
+ * This is a macro for conveniently iterating over a ringbuffer.
+ * Note that @s may not be the sequence number of the record on each
+ * iteration. For the sequence number, @r->info->seq should be checked.
+ *
+ * Context: Any context.
+ */
+#define prb_for_each_record(from, rb, s, r) \
+for ((s) = from; prb_read_valid(rb, s, r); (s) = (r)->info->seq + 1)
+
+/**
+ * prb_for_each_info() - Iterate over the meta data of a ringbuffer.
+ *
+ * @from: The sequence number to begin with.
+ * @rb:   The ringbuffer to iterate over.
+ * @s:    A u64 to store the sequence number on each iteration.
+ * @i:    A printk_info to store the record meta data on each iteration.
+ * @lc:   An unsigned int to store the text line count of each record.
+ *
+ * This is a macro for conveniently iterating over a ringbuffer.
+ * Note that @s may not be the sequence number of the record on each
+ * iteration. For the sequence number, @r->info->seq should be checked.
+ *
+ * Context: Any context.
+ */
+#define prb_for_each_info(from, rb, s, i, lc) \
+for ((s) = from; prb_read_valid_info(rb, s, i, lc); (s) = (i)->seq + 1)
+
+bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq,
+		    struct printk_record *r);
+bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq,
+			 struct printk_info *info, unsigned int *line_count);
+
+u64 prb_first_valid_seq(struct printk_ringbuffer *rb);
+u64 prb_next_seq(struct printk_ringbuffer *rb);
+
+#endif /* _KERNEL_PRINTK_RINGBUFFER_H */
-- 
2.20.1

Re: [PATCH v5 2/4] printk: add lockless ringbuffer

[Sergey Senozhatsky]

On (20/07/09 15:29), John Ogness wrote:
[..]
> +/*
> + * A data block: mapped directly to the beginning of the data block area
> + * specified as a logical position within the data ring.
> + *
> + * @id:   the ID of the associated descriptor
> + * @data: the writer data
> + *
> + * Note that the size of a data block is only known by its associated
> + * descriptor.
> + */
> +struct prb_data_block {
> +	unsigned long	id;
> +	char		data[0];
> +};

A nit: I think someone will send "Replace zero-length arrays with
flexible array member" soon enough:

-	char		data[0];
+	char		data[];

[..]
> +/*
> + * Sanity checker for reserve size. The ringbuffer code assumes that a data
> + * block does not exceed the maximum possible size that could fit within the
> + * ringbuffer. This function provides that basic size check so that the
> + * assumption is safe.
> + *
> + * Writers are also not allowed to write 0-sized (data-less) records. Such
> + * records are used only internally by the ringbuffer.
> + */
> +static bool data_check_size(struct prb_data_ring *data_ring, unsigned int size)
> +{
> +	struct prb_data_block *db = NULL;
> +
> +	/*
> +	 * Writers are not allowed to write data-less records. Such records
> +	 * are used only internally by the ringbuffer to denote records where
> +	 * their data failed to allocate or have been lost.
> +	 */

A nit: The same data-less records comment is some 5 lines earlier. But OK.

> +	if (size == 0)
> +		return false;

[..]

> +void prb_init(struct printk_ringbuffer *rb,
> +	      char *text_buf, unsigned int textbits,
> +	      char *dict_buf, unsigned int dictbits,
> +	      struct prb_desc *descs, unsigned int descbits)
> +{
> +	memset(descs, 0, _DESCS_COUNT(descbits) * sizeof(descs[0]));
> +
> +	rb->desc_ring.count_bits = descbits;
> +	rb->desc_ring.descs = descs;
> +	atomic_long_set(&rb->desc_ring.head_id, DESC0_ID(descbits));
> +	atomic_long_set(&rb->desc_ring.tail_id, DESC0_ID(descbits));
> +
> +	rb->text_data_ring.size_bits = textbits;
> +	rb->text_data_ring.data = text_buf;
> +	atomic_long_set(&rb->text_data_ring.head_lpos, BLK0_LPOS(textbits));
> +	atomic_long_set(&rb->text_data_ring.tail_lpos, BLK0_LPOS(textbits));
> +
> +	rb->dict_data_ring.size_bits = dictbits;
> +	rb->dict_data_ring.data = dict_buf;
> +	atomic_long_set(&rb->dict_data_ring.head_lpos, BLK0_LPOS(dictbits));
> +	atomic_long_set(&rb->dict_data_ring.tail_lpos, BLK0_LPOS(dictbits));
> +

Just a side note: some people want !CONFIG_PRINTK builds. I wonder
how many people will want !CONFIG_PRINTK_DICT. The core logbuf/dict
logbuf split is really cool.

	-ss

Re: [PATCH v5 2/4] printk: add lockless ringbuffer

[Sergey Senozhatsky]

On (20/07/10 17:43), Sergey Senozhatsky wrote:
> [..]
> 
> > +void prb_init(struct printk_ringbuffer *rb,
> > +	      char *text_buf, unsigned int textbits,
> > +	      char *dict_buf, unsigned int dictbits,
> > +	      struct prb_desc *descs, unsigned int descbits)
> > +{
> > +	memset(descs, 0, _DESCS_COUNT(descbits) * sizeof(descs[0]));
> > +
> > +	rb->desc_ring.count_bits = descbits;
> > +	rb->desc_ring.descs = descs;
> > +	atomic_long_set(&rb->desc_ring.head_id, DESC0_ID(descbits));
> > +	atomic_long_set(&rb->desc_ring.tail_id, DESC0_ID(descbits));
> > +
> > +	rb->text_data_ring.size_bits = textbits;
> > +	rb->text_data_ring.data = text_buf;
> > +	atomic_long_set(&rb->text_data_ring.head_lpos, BLK0_LPOS(textbits));
> > +	atomic_long_set(&rb->text_data_ring.tail_lpos, BLK0_LPOS(textbits));
> > +
> > +	rb->dict_data_ring.size_bits = dictbits;
> > +	rb->dict_data_ring.data = dict_buf;
> > +	atomic_long_set(&rb->dict_data_ring.head_lpos, BLK0_LPOS(dictbits));
> > +	atomic_long_set(&rb->dict_data_ring.tail_lpos, BLK0_LPOS(dictbits));
> > +
> 
> Just a side note: some people want !CONFIG_PRINTK builds. I wonder
> how many people will want !CONFIG_PRINTK_DICT. The core logbuf/dict
> logbuf split is really cool.

We also may be can add a dedicated logbuf for the user-space logs,
as opposed to current "user space can write to the kernel logbuf".
Some folks really dislike that systemd, for instance, can trash
the core kernel logbuf doing a lot of /dev/kmsg writes.

	-ss

[PATCH v5 3/4] Revert "printk: lock/unlock console only for new logbuf entries"

[John Ogness]

This reverts commit 3ac37a93fa9217e576bebfd4ba3e80edaaeb2289.

This optimization will not apply once the transition to a lockless
printk is complete. Rather than porting this optimization through
the transition only to remove it anyway, just revert it now to
simplify the transition.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 kernel/printk/printk.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index b71eaf5f5a86..1b41e1b98221 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1981,9 +1981,8 @@ asmlinkage int vprintk_emit(int facility, int level,
 			    const char *fmt, va_list args)
 {
 	int printed_len;
-	bool in_sched = false, pending_output;
+	bool in_sched = false;
 	unsigned long flags;
-	u64 curr_log_seq;
 
 	/* Suppress unimportant messages after panic happens */
 	if (unlikely(suppress_printk))
@@ -1999,13 +1998,11 @@ asmlinkage int vprintk_emit(int facility, int level,
 
 	/* This stops the holder of console_sem just where we want him */
 	logbuf_lock_irqsave(flags);
-	curr_log_seq = log_next_seq;
 	printed_len = vprintk_store(facility, level, dict, dictlen, fmt, args);
-	pending_output = (curr_log_seq != log_next_seq);
 	logbuf_unlock_irqrestore(flags);
 
 	/* If called from the scheduler, we can not call up(). */
-	if (!in_sched && pending_output) {
+	if (!in_sched) {
 		/*
 		 * Disable preemption to avoid being preempted while holding
 		 * console_sem which would prevent anyone from printing to
@@ -2022,8 +2019,7 @@ asmlinkage int vprintk_emit(int facility, int level,
 		preempt_enable();
 	}
 
-	if (pending_output)
-		wake_up_klogd();
+	wake_up_klogd();
 	return printed_len;
 }
 EXPORT_SYMBOL(vprintk_emit);
-- 
2.20.1

[PATCH v5 4/4] printk: use the lockless ringbuffer

[John Ogness]

Replace the existing ringbuffer usage and implementation with
lockless ringbuffer usage. Even though the new ringbuffer does not
require locking, all existing locking is left in place. Therefore,
this change is purely replacing the underlining ringbuffer.

Changes that exist due to the ringbuffer replacement:

- The VMCOREINFO has been updated for the new structures.

- Dictionary data is now stored in a separate data buffer from the
  human-readable messages. The dictionary data buffer is set to the
  same size as the message buffer. Therefore, the total required
  memory for both dictionary and message data is
  2 * (2 ^ CONFIG_LOG_BUF_SHIFT) for the initial static buffers and
  2 * log_buf_len (the kernel parameter) for the dynamic buffers.

- Record meta-data is now stored in a separate array of descriptors.
  This is an additional 72 * (2 ^ (CONFIG_LOG_BUF_SHIFT - 5)) bytes
  for the static array and 72 * (log_buf_len >> 5) bytes for the
  dynamic array.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
---
 kernel/printk/printk.c | 940 +++++++++++++++++++++--------------------
 1 file changed, 493 insertions(+), 447 deletions(-)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 1b41e1b98221..fec71229169e 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -55,6 +55,7 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/printk.h>
 
+#include "printk_ringbuffer.h"
 #include "console_cmdline.h"
 #include "braille.h"
 #include "internal.h"
@@ -294,30 +295,24 @@ enum con_msg_format_flags {
 static int console_msg_format = MSG_FORMAT_DEFAULT;
 
 /*
- * The printk log buffer consists of a chain of concatenated variable
- * length records. Every record starts with a record header, containing
- * the overall length of the record.
+ * The printk log buffer consists of a sequenced collection of records, each
+ * containing variable length message and dictionary text. Every record
+ * also contains its own meta-data (@info).
  *
- * The heads to the first and last entry in the buffer, as well as the
- * sequence numbers of these entries are maintained when messages are
- * stored.
+ * Every record meta-data carries the timestamp in microseconds, as well as
+ * the standard userspace syslog level and syslog facility. The usual kernel
+ * messages use LOG_KERN; userspace-injected messages always carry a matching
+ * syslog facility, by default LOG_USER. The origin of every message can be
+ * reliably determined that way.
  *
- * If the heads indicate available messages, the length in the header
- * tells the start next message. A length == 0 for the next message
- * indicates a wrap-around to the beginning of the buffer.
+ * The human readable log message of a record is available in @text, the
+ * length of the message text in @text_len. The stored message is not
+ * terminated.
  *
- * Every record carries the monotonic timestamp in microseconds, as well as
- * the standard userspace syslog level and syslog facility. The usual
- * kernel messages use LOG_KERN; userspace-injected messages always carry
- * a matching syslog facility, by default LOG_USER. The origin of every
- * message can be reliably determined that way.
- *
- * The human readable log message directly follows the message header. The
- * length of the message text is stored in the header, the stored message
- * is not terminated.
- *
- * Optionally, a message can carry a dictionary of properties (key/value pairs),
- * to provide userspace with a machine-readable message context.
+ * Optionally, a record can carry a dictionary of properties (key/value
+ * pairs), to provide userspace with a machine-readable message context. The
+ * length of the dictionary is available in @dict_len. The dictionary is not
+ * terminated.
  *
  * Examples for well-defined, commonly used property names are:
  *   DEVICE=b12:8               device identifier
@@ -331,21 +326,19 @@ static int console_msg_format = MSG_FORMAT_DEFAULT;
  * follows directly after a '=' character. Every property is terminated by
  * a '\0' character. The last property is not terminated.
  *
- * Example of a message structure:
- *   0000  ff 8f 00 00 00 00 00 00      monotonic time in nsec
- *   0008  34 00                        record is 52 bytes long
- *   000a        0b 00                  text is 11 bytes long
- *   000c              1f 00            dictionary is 23 bytes long
- *   000e                    03 00      LOG_KERN (facility) LOG_ERR (level)
- *   0010  69 74 27 73 20 61 20 6c      "it's a l"
- *         69 6e 65                     "ine"
- *   001b           44 45 56 49 43      "DEVIC"
- *         45 3d 62 38 3a 32 00 44      "E=b8:2\0D"
- *         52 49 56 45 52 3d 62 75      "RIVER=bu"
- *         67                           "g"
- *   0032     00 00 00                  padding to next message header
- *
- * The 'struct printk_log' buffer header must never be directly exported to
+ * Example of record values:
+ *   record.text_buf       = "it's a line" (unterminated)
+ *   record.dict_buf       = "DEVICE=b8:2\0DRIVER=bug" (unterminated)
+ *   record.info.seq       = 56
+ *   record.info.ts_nsec   = 36863
+ *   record.info.text_len  = 11
+ *   record.info.dict_len  = 22
+ *   record.info.facility  = 0 (LOG_KERN)
+ *   record.info.flags     = 0
+ *   record.info.level     = 3 (LOG_ERR)
+ *   record.info.caller_id = 299 (task 299)
+ *
+ * The 'struct printk_info' buffer must never be directly exported to
  * userspace, it is a kernel-private implementation detail that might
  * need to be changed in the future, when the requirements change.
  *
@@ -365,23 +358,6 @@ enum log_flags {
 	LOG_CONT	= 8,	/* text is a fragment of a continuation line */
 };
 
-struct printk_log {
-	u64 ts_nsec;		/* timestamp in nanoseconds */
-	u16 len;		/* length of entire record */
-	u16 text_len;		/* length of text buffer */
-	u16 dict_len;		/* length of dictionary buffer */
-	u8 facility;		/* syslog facility */
-	u8 flags:5;		/* internal record flags */
-	u8 level:3;		/* syslog level */
-#ifdef CONFIG_PRINTK_CALLER
-	u32 caller_id;            /* thread id or processor id */
-#endif
-}
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-__packed __aligned(4)
-#endif
-;
-
 /*
  * The logbuf_lock protects kmsg buffer, indices, counters.  This can be taken
  * within the scheduler's rq lock. It must be released before calling
@@ -421,26 +397,16 @@ DEFINE_RAW_SPINLOCK(logbuf_lock);
 DECLARE_WAIT_QUEUE_HEAD(log_wait);
 /* the next printk record to read by syslog(READ) or /proc/kmsg */
 static u64 syslog_seq;
-static u32 syslog_idx;
 static size_t syslog_partial;
 static bool syslog_time;
 
-/* index and sequence number of the first record stored in the buffer */
-static u64 log_first_seq;
-static u32 log_first_idx;
-
-/* index and sequence number of the next record to store in the buffer */
-static u64 log_next_seq;
-static u32 log_next_idx;
-
 /* the next printk record to write to the console */
 static u64 console_seq;
-static u32 console_idx;
 static u64 exclusive_console_stop_seq;
+static unsigned long console_dropped;
 
 /* the next printk record to read after the last 'clear' command */
 static u64 clear_seq;
-static u32 clear_idx;
 
 #ifdef CONFIG_PRINTK_CALLER
 #define PREFIX_MAX		48
@@ -453,13 +419,31 @@ static u32 clear_idx;
 #define LOG_FACILITY(v)		((v) >> 3 & 0xff)
 
 /* record buffer */
-#define LOG_ALIGN __alignof__(struct printk_log)
+#define LOG_ALIGN __alignof__(unsigned long)
 #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
 #define LOG_BUF_LEN_MAX (u32)(1 << 31)
 static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
 static char *log_buf = __log_buf;
 static u32 log_buf_len = __LOG_BUF_LEN;
 
+/*
+ * Define the average message size. This only affects the number of
+ * descriptors that will be available. Underestimating is better than
+ * overestimating (too many available descriptors is better than not enough).
+ * The dictionary buffer will be the same size as the text buffer.
+ */
+#define PRB_AVGBITS 5	/* 32 character average length */
+
+#if CONFIG_LOG_BUF_SHIFT <= PRB_AVGBITS
+#error CONFIG_LOG_BUF_SHIFT value too small.
+#endif
+_DEFINE_PRINTKRB(printk_rb_static, CONFIG_LOG_BUF_SHIFT - PRB_AVGBITS,
+		 PRB_AVGBITS, PRB_AVGBITS, &__log_buf[0]);
+
+static struct printk_ringbuffer printk_rb_dynamic;
+
+static struct printk_ringbuffer *prb = &printk_rb_static;
+
 /*
  * We cannot access per-CPU data (e.g. per-CPU flush irq_work) before
  * per_cpu_areas are initialised. This variable is set to true when
@@ -484,108 +468,6 @@ u32 log_buf_len_get(void)
 	return log_buf_len;
 }
 
-/* human readable text of the record */
-static char *log_text(const struct printk_log *msg)
-{
-	return (char *)msg + sizeof(struct printk_log);
-}
-
-/* optional key/value pair dictionary attached to the record */
-static char *log_dict(const struct printk_log *msg)
-{
-	return (char *)msg + sizeof(struct printk_log) + msg->text_len;
-}
-
-/* get record by index; idx must point to valid msg */
-static struct printk_log *log_from_idx(u32 idx)
-{
-	struct printk_log *msg = (struct printk_log *)(log_buf + idx);
-
-	/*
-	 * A length == 0 record is the end of buffer marker. Wrap around and
-	 * read the message at the start of the buffer.
-	 */
-	if (!msg->len)
-		return (struct printk_log *)log_buf;
-	return msg;
-}
-
-/* get next record; idx must point to valid msg */
-static u32 log_next(u32 idx)
-{
-	struct printk_log *msg = (struct printk_log *)(log_buf + idx);
-
-	/* length == 0 indicates the end of the buffer; wrap */
-	/*
-	 * A length == 0 record is the end of buffer marker. Wrap around and
-	 * read the message at the start of the buffer as *this* one, and
-	 * return the one after that.
-	 */
-	if (!msg->len) {
-		msg = (struct printk_log *)log_buf;
-		return msg->len;
-	}
-	return idx + msg->len;
-}
-
-/*
- * Check whether there is enough free space for the given message.
- *
- * The same values of first_idx and next_idx mean that the buffer
- * is either empty or full.
- *
- * If the buffer is empty, we must respect the position of the indexes.
- * They cannot be reset to the beginning of the buffer.
- */
-static int logbuf_has_space(u32 msg_size, bool empty)
-{
-	u32 free;
-
-	if (log_next_idx > log_first_idx || empty)
-		free = max(log_buf_len - log_next_idx, log_first_idx);
-	else
-		free = log_first_idx - log_next_idx;
-
-	/*
-	 * We need space also for an empty header that signalizes wrapping
-	 * of the buffer.
-	 */
-	return free >= msg_size + sizeof(struct printk_log);
-}
-
-static int log_make_free_space(u32 msg_size)
-{
-	while (log_first_seq < log_next_seq &&
-	       !logbuf_has_space(msg_size, false)) {
-		/* drop old messages until we have enough contiguous space */
-		log_first_idx = log_next(log_first_idx);
-		log_first_seq++;
-	}
-
-	if (clear_seq < log_first_seq) {
-		clear_seq = log_first_seq;
-		clear_idx = log_first_idx;
-	}
-
-	/* sequence numbers are equal, so the log buffer is empty */
-	if (logbuf_has_space(msg_size, log_first_seq == log_next_seq))
-		return 0;
-
-	return -ENOMEM;
-}
-
-/* compute the message size including the padding bytes */
-static u32 msg_used_size(u16 text_len, u16 dict_len, u32 *pad_len)
-{
-	u32 size;
-
-	size = sizeof(struct printk_log) + text_len + dict_len;
-	*pad_len = (-size) & (LOG_ALIGN - 1);
-	size += *pad_len;
-
-	return size;
-}
-
 /*
  * Define how much of the log buffer we could take at maximum. The value
  * must be greater than two. Note that only half of the buffer is available
@@ -594,22 +476,23 @@ static u32 msg_used_size(u16 text_len, u16 dict_len, u32 *pad_len)
 #define MAX_LOG_TAKE_PART 4
 static const char trunc_msg[] = "<truncated>";
 
-static u32 truncate_msg(u16 *text_len, u16 *trunc_msg_len,
-			u16 *dict_len, u32 *pad_len)
+static void truncate_msg(u16 *text_len, u16 *trunc_msg_len)
 {
 	/*
 	 * The message should not take the whole buffer. Otherwise, it might
 	 * get removed too soon.
 	 */
 	u32 max_text_len = log_buf_len / MAX_LOG_TAKE_PART;
+
 	if (*text_len > max_text_len)
 		*text_len = max_text_len;
-	/* enable the warning message */
+
+	/* enable the warning message (if there is room) */
 	*trunc_msg_len = strlen(trunc_msg);
-	/* disable the "dict" completely */
-	*dict_len = 0;
-	/* compute the size again, count also the warning message */
-	return msg_used_size(*text_len + *trunc_msg_len, 0, pad_len);
+	if (*text_len >= *trunc_msg_len)
+		*text_len -= *trunc_msg_len;
+	else
+		*trunc_msg_len = 0;
 }
 
 /* insert record into the buffer, discard old ones, update heads */
@@ -618,60 +501,40 @@ static int log_store(u32 caller_id, int facility, int level,
 		     const char *dict, u16 dict_len,
 		     const char *text, u16 text_len)
 {
-	struct printk_log *msg;
-	u32 size, pad_len;
+	struct prb_reserved_entry e;
+	struct printk_record r;
 	u16 trunc_msg_len = 0;
 
-	/* number of '\0' padding bytes to next message */
-	size = msg_used_size(text_len, dict_len, &pad_len);
+	prb_rec_init_wr(&r, text_len, dict_len);
 
-	if (log_make_free_space(size)) {
+	if (!prb_reserve(&e, prb, &r)) {
 		/* truncate the message if it is too long for empty buffer */
-		size = truncate_msg(&text_len, &trunc_msg_len,
-				    &dict_len, &pad_len);
+		truncate_msg(&text_len, &trunc_msg_len);
+		prb_rec_init_wr(&r, text_len + trunc_msg_len, dict_len);
 		/* survive when the log buffer is too small for trunc_msg */
-		if (log_make_free_space(size))
+		if (!prb_reserve(&e, prb, &r))
 			return 0;
 	}
 
-	if (log_next_idx + size + sizeof(struct printk_log) > log_buf_len) {
-		/*
-		 * This message + an additional empty header does not fit
-		 * at the end of the buffer. Add an empty header with len == 0
-		 * to signify a wrap around.
-		 */
-		memset(log_buf + log_next_idx, 0, sizeof(struct printk_log));
-		log_next_idx = 0;
-	}
-
 	/* fill message */
-	msg = (struct printk_log *)(log_buf + log_next_idx);
-	memcpy(log_text(msg), text, text_len);
-	msg->text_len = text_len;
-	if (trunc_msg_len) {
-		memcpy(log_text(msg) + text_len, trunc_msg, trunc_msg_len);
-		msg->text_len += trunc_msg_len;
-	}
-	memcpy(log_dict(msg), dict, dict_len);
-	msg->dict_len = dict_len;
-	msg->facility = facility;
-	msg->level = level & 7;
-	msg->flags = flags & 0x1f;
+	memcpy(&r.text_buf[0], text, text_len);
+	if (trunc_msg_len)
+		memcpy(&r.text_buf[text_len], trunc_msg, trunc_msg_len);
+	if (r.dict_buf)
+		memcpy(&r.dict_buf[0], dict, dict_len);
+	r.info->facility = facility;
+	r.info->level = level & 7;
+	r.info->flags = flags & 0x1f;
 	if (ts_nsec > 0)
-		msg->ts_nsec = ts_nsec;
+		r.info->ts_nsec = ts_nsec;
 	else
-		msg->ts_nsec = local_clock();
-#ifdef CONFIG_PRINTK_CALLER
-	msg->caller_id = caller_id;
-#endif
-	memset(log_dict(msg) + dict_len, 0, pad_len);
-	msg->len = size;
+		r.info->ts_nsec = local_clock();
+	r.info->caller_id = caller_id;
 
 	/* insert message */
-	log_next_idx += msg->len;
-	log_next_seq++;
+	prb_commit(&e);
 
-	return msg->text_len;
+	return (text_len + trunc_msg_len);
 }
 
 int dmesg_restrict = IS_ENABLED(CONFIG_SECURITY_DMESG_RESTRICT);
@@ -723,13 +586,13 @@ static void append_char(char **pp, char *e, char c)
 		*(*pp)++ = c;
 }
 
-static ssize_t msg_print_ext_header(char *buf, size_t size,
-				    struct printk_log *msg, u64 seq)
+static ssize_t info_print_ext_header(char *buf, size_t size,
+				     struct printk_info *info)
 {
-	u64 ts_usec = msg->ts_nsec;
+	u64 ts_usec = info->ts_nsec;
 	char caller[20];
 #ifdef CONFIG_PRINTK_CALLER
-	u32 id = msg->caller_id;
+	u32 id = info->caller_id;
 
 	snprintf(caller, sizeof(caller), ",caller=%c%u",
 		 id & 0x80000000 ? 'C' : 'T', id & ~0x80000000);
@@ -740,8 +603,8 @@ static ssize_t msg_print_ext_header(char *buf, size_t size,
 	do_div(ts_usec, 1000);
 
 	return scnprintf(buf, size, "%u,%llu,%llu,%c%s;",
-			 (msg->facility << 3) | msg->level, seq, ts_usec,
-			 msg->flags & LOG_CONT ? 'c' : '-', caller);
+			 (info->facility << 3) | info->level, info->seq,
+			 ts_usec, info->flags & LOG_CONT ? 'c' : '-', caller);
 }
 
 static ssize_t msg_print_ext_body(char *buf, size_t size,
@@ -795,10 +658,14 @@ static ssize_t msg_print_ext_body(char *buf, size_t size,
 /* /dev/kmsg - userspace message inject/listen interface */
 struct devkmsg_user {
 	u64 seq;
-	u32 idx;
 	struct ratelimit_state rs;
 	struct mutex lock;
 	char buf[CONSOLE_EXT_LOG_MAX];
+
+	struct printk_info info;
+	char text_buf[CONSOLE_EXT_LOG_MAX];
+	char dict_buf[CONSOLE_EXT_LOG_MAX];
+	struct printk_record record;
 };
 
 static __printf(3, 4) __cold
@@ -881,7 +748,7 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf,
 			    size_t count, loff_t *ppos)
 {
 	struct devkmsg_user *user = file->private_data;
-	struct printk_log *msg;
+	struct printk_record *r = &user->record;
 	size_t len;
 	ssize_t ret;
 
@@ -893,7 +760,7 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf,
 		return ret;
 
 	logbuf_lock_irq();
-	while (user->seq == log_next_seq) {
+	if (!prb_read_valid(prb, user->seq, r)) {
 		if (file->f_flags & O_NONBLOCK) {
 			ret = -EAGAIN;
 			logbuf_unlock_irq();
@@ -902,30 +769,26 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf,
 
 		logbuf_unlock_irq();
 		ret = wait_event_interruptible(log_wait,
-					       user->seq != log_next_seq);
+					prb_read_valid(prb, user->seq, r));
 		if (ret)
 			goto out;
 		logbuf_lock_irq();
 	}
 
-	if (user->seq < log_first_seq) {
+	if (user->seq < prb_first_valid_seq(prb)) {
 		/* our last seen message is gone, return error and reset */
-		user->idx = log_first_idx;
-		user->seq = log_first_seq;
+		user->seq = prb_first_valid_seq(prb);
 		ret = -EPIPE;
 		logbuf_unlock_irq();
 		goto out;
 	}
 
-	msg = log_from_idx(user->idx);
-	len = msg_print_ext_header(user->buf, sizeof(user->buf),
-				   msg, user->seq);
+	len = info_print_ext_header(user->buf, sizeof(user->buf), r->info);
 	len += msg_print_ext_body(user->buf + len, sizeof(user->buf) - len,
-				  log_dict(msg), msg->dict_len,
-				  log_text(msg), msg->text_len);
+				  &r->dict_buf[0], r->info->dict_len,
+				  &r->text_buf[0], r->info->text_len);
 
-	user->idx = log_next(user->idx);
-	user->seq++;
+	user->seq = r->info->seq + 1;
 	logbuf_unlock_irq();
 
 	if (len > count) {
@@ -957,8 +820,7 @@ static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence)
 	switch (whence) {
 	case SEEK_SET:
 		/* the first record */
-		user->idx = log_first_idx;
-		user->seq = log_first_seq;
+		user->seq = prb_first_valid_seq(prb);
 		break;
 	case SEEK_DATA:
 		/*
@@ -966,13 +828,11 @@ static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence)
 		 * like issued by 'dmesg -c'. Reading /dev/kmsg itself
 		 * changes no global state, and does not clear anything.
 		 */
-		user->idx = clear_idx;
 		user->seq = clear_seq;
 		break;
 	case SEEK_END:
 		/* after the last record */
-		user->idx = log_next_idx;
-		user->seq = log_next_seq;
+		user->seq = prb_next_seq(prb);
 		break;
 	default:
 		ret = -EINVAL;
@@ -992,9 +852,9 @@ static __poll_t devkmsg_poll(struct file *file, poll_table *wait)
 	poll_wait(file, &log_wait, wait);
 
 	logbuf_lock_irq();
-	if (user->seq < log_next_seq) {
+	if (prb_read_valid(prb, user->seq, NULL)) {
 		/* return error when data has vanished underneath us */
-		if (user->seq < log_first_seq)
+		if (user->seq < prb_first_valid_seq(prb))
 			ret = EPOLLIN|EPOLLRDNORM|EPOLLERR|EPOLLPRI;
 		else
 			ret = EPOLLIN|EPOLLRDNORM;
@@ -1029,9 +889,12 @@ static int devkmsg_open(struct inode *inode, struct file *file)
 
 	mutex_init(&user->lock);
 
+	prb_rec_init_rd(&user->record, &user->info,
+			&user->text_buf[0], sizeof(user->text_buf),
+			&user->dict_buf[0], sizeof(user->dict_buf));
+
 	logbuf_lock_irq();
-	user->idx = log_first_idx;
-	user->seq = log_first_seq;
+	user->seq = prb_first_valid_seq(prb);
 	logbuf_unlock_irq();
 
 	file->private_data = user;
@@ -1072,23 +935,52 @@ const struct file_operations kmsg_fops = {
  */
 void log_buf_vmcoreinfo_setup(void)
 {
-	VMCOREINFO_SYMBOL(log_buf);
-	VMCOREINFO_SYMBOL(log_buf_len);
-	VMCOREINFO_SYMBOL(log_first_idx);
-	VMCOREINFO_SYMBOL(clear_idx);
-	VMCOREINFO_SYMBOL(log_next_idx);
+	VMCOREINFO_SYMBOL(prb);
+	VMCOREINFO_SYMBOL(printk_rb_static);
+	VMCOREINFO_SYMBOL(clear_seq);
+
 	/*
-	 * Export struct printk_log size and field offsets. User space tools can
+	 * Export struct size and field offsets. User space tools can
 	 * parse it and detect any changes to structure down the line.
 	 */
-	VMCOREINFO_STRUCT_SIZE(printk_log);
-	VMCOREINFO_OFFSET(printk_log, ts_nsec);
-	VMCOREINFO_OFFSET(printk_log, len);
-	VMCOREINFO_OFFSET(printk_log, text_len);
-	VMCOREINFO_OFFSET(printk_log, dict_len);
-#ifdef CONFIG_PRINTK_CALLER
-	VMCOREINFO_OFFSET(printk_log, caller_id);
-#endif
+
+	VMCOREINFO_STRUCT_SIZE(printk_ringbuffer);
+	VMCOREINFO_OFFSET(printk_ringbuffer, desc_ring);
+	VMCOREINFO_OFFSET(printk_ringbuffer, text_data_ring);
+	VMCOREINFO_OFFSET(printk_ringbuffer, dict_data_ring);
+	VMCOREINFO_OFFSET(printk_ringbuffer, fail);
+
+	VMCOREINFO_STRUCT_SIZE(prb_desc_ring);
+	VMCOREINFO_OFFSET(prb_desc_ring, count_bits);
+	VMCOREINFO_OFFSET(prb_desc_ring, descs);
+	VMCOREINFO_OFFSET(prb_desc_ring, head_id);
+	VMCOREINFO_OFFSET(prb_desc_ring, tail_id);
+
+	VMCOREINFO_STRUCT_SIZE(prb_desc);
+	VMCOREINFO_OFFSET(prb_desc, info);
+	VMCOREINFO_OFFSET(prb_desc, state_var);
+	VMCOREINFO_OFFSET(prb_desc, text_blk_lpos);
+	VMCOREINFO_OFFSET(prb_desc, dict_blk_lpos);
+
+	VMCOREINFO_STRUCT_SIZE(prb_data_blk_lpos);
+	VMCOREINFO_OFFSET(prb_data_blk_lpos, begin);
+	VMCOREINFO_OFFSET(prb_data_blk_lpos, next);
+
+	VMCOREINFO_STRUCT_SIZE(printk_info);
+	VMCOREINFO_OFFSET(printk_info, seq);
+	VMCOREINFO_OFFSET(printk_info, ts_nsec);
+	VMCOREINFO_OFFSET(printk_info, text_len);
+	VMCOREINFO_OFFSET(printk_info, dict_len);
+	VMCOREINFO_OFFSET(printk_info, caller_id);
+
+	VMCOREINFO_STRUCT_SIZE(prb_data_ring);
+	VMCOREINFO_OFFSET(prb_data_ring, size_bits);
+	VMCOREINFO_OFFSET(prb_data_ring, data);
+	VMCOREINFO_OFFSET(prb_data_ring, head_lpos);
+	VMCOREINFO_OFFSET(prb_data_ring, tail_lpos);
+
+	VMCOREINFO_SIZE(atomic_long_t);
+	VMCOREINFO_TYPE_OFFSET(atomic_long_t, counter);
 }
 #endif
 
@@ -1166,11 +1058,48 @@ static void __init set_percpu_data_ready(void)
 	__printk_percpu_data_ready = true;
 }
 
+static unsigned int __init add_to_rb(struct printk_ringbuffer *rb,
+				     struct printk_record *r)
+{
+	struct prb_reserved_entry e;
+	struct printk_record dest_r;
+
+	prb_rec_init_wr(&dest_r, r->info->text_len, r->info->dict_len);
+
+	if (!prb_reserve(&e, rb, &dest_r))
+		return 0;
+
+	memcpy(&dest_r.text_buf[0], &r->text_buf[0], dest_r.text_buf_size);
+	if (dest_r.dict_buf) {
+		memcpy(&dest_r.dict_buf[0], &r->dict_buf[0],
+		       dest_r.dict_buf_size);
+	}
+	dest_r.info->facility = r->info->facility;
+	dest_r.info->level = r->info->level;
+	dest_r.info->flags = r->info->flags;
+	dest_r.info->ts_nsec = r->info->ts_nsec;
+	dest_r.info->caller_id = r->info->caller_id;
+
+	prb_commit(&e);
+
+	return prb_record_text_space(&e);
+}
+
+static char setup_text_buf[CONSOLE_EXT_LOG_MAX] __initdata;
+static char setup_dict_buf[CONSOLE_EXT_LOG_MAX] __initdata;
+
 void __init setup_log_buf(int early)
 {
+	unsigned int new_descs_count;
+	struct prb_desc *new_descs;
+	struct printk_info info;
+	struct printk_record r;
+	size_t new_descs_size;
 	unsigned long flags;
+	char *new_dict_buf;
 	char *new_log_buf;
 	unsigned int free;
+	u64 seq;
 
 	/*
 	 * Some archs call setup_log_buf() multiple times - first is very
@@ -1189,21 +1118,70 @@ void __init setup_log_buf(int early)
 	if (!new_log_buf_len)
 		return;
 
+	new_descs_count = new_log_buf_len >> PRB_AVGBITS;
+	if (new_descs_count == 0) {
+		pr_err("new_log_buf_len: %lu too small\n", new_log_buf_len);
+		return;
+	}
+
 	new_log_buf = memblock_alloc(new_log_buf_len, LOG_ALIGN);
 	if (unlikely(!new_log_buf)) {
-		pr_err("log_buf_len: %lu bytes not available\n",
-			new_log_buf_len);
+		pr_err("log_buf_len: %lu text bytes not available\n",
+		       new_log_buf_len);
 		return;
 	}
 
+	new_dict_buf = memblock_alloc(new_log_buf_len, LOG_ALIGN);
+	if (unlikely(!new_dict_buf)) {
+		pr_err("log_buf_len: %lu dict bytes not available\n",
+		       new_log_buf_len);
+		memblock_free(__pa(new_log_buf), new_log_buf_len);
+		return;
+	}
+
+	new_descs_size = new_descs_count * sizeof(struct prb_desc);
+	new_descs = memblock_alloc(new_descs_size, LOG_ALIGN);
+	if (unlikely(!new_descs)) {
+		pr_err("log_buf_len: %zu desc bytes not available\n",
+		       new_descs_size);
+		memblock_free(__pa(new_dict_buf), new_log_buf_len);
+		memblock_free(__pa(new_log_buf), new_log_buf_len);
+		return;
+	}
+
+	prb_rec_init_rd(&r, &info,
+			&setup_text_buf[0], sizeof(setup_text_buf),
+			&setup_dict_buf[0], sizeof(setup_dict_buf));
+
+	prb_init(&printk_rb_dynamic,
+		 new_log_buf, ilog2(new_log_buf_len),
+		 new_dict_buf, ilog2(new_log_buf_len),
+		 new_descs, ilog2(new_descs_count));
+
 	logbuf_lock_irqsave(flags);
+
 	log_buf_len = new_log_buf_len;
 	log_buf = new_log_buf;
 	new_log_buf_len = 0;
-	free = __LOG_BUF_LEN - log_next_idx;
-	memcpy(log_buf, __log_buf, __LOG_BUF_LEN);
+
+	free = __LOG_BUF_LEN;
+	prb_for_each_record(0, &printk_rb_static, seq, &r)
+		free -= add_to_rb(&printk_rb_dynamic, &r);
+
+	/*
+	 * This is early enough that everything is still running on the
+	 * boot CPU and interrupts are disabled. So no new messages will
+	 * appear during the transition to the dynamic buffer.
+	 */
+	prb = &printk_rb_dynamic;
+
 	logbuf_unlock_irqrestore(flags);
 
+	if (seq != prb_next_seq(&printk_rb_static)) {
+		pr_err("dropped %llu messages\n",
+		       prb_next_seq(&printk_rb_static) - seq);
+	}
+
 	pr_info("log_buf_len: %u bytes\n", log_buf_len);
 	pr_info("early log buf free: %u(%u%%)\n",
 		free, (free * 100) / __LOG_BUF_LEN);
@@ -1313,18 +1291,18 @@ static size_t print_caller(u32 id, char *buf)
 #define print_caller(id, buf) 0
 #endif
 
-static size_t print_prefix(const struct printk_log *msg, bool syslog,
-			   bool time, char *buf)
+static size_t info_print_prefix(const struct printk_info  *info, bool syslog,
+				bool time, char *buf)
 {
 	size_t len = 0;
 
 	if (syslog)
-		len = print_syslog((msg->facility << 3) | msg->level, buf);
+		len = print_syslog((info->facility << 3) | info->level, buf);
 
 	if (time)
-		len += print_time(msg->ts_nsec, buf + len);
+		len += print_time(info->ts_nsec, buf + len);
 
-	len += print_caller(msg->caller_id, buf + len);
+	len += print_caller(info->caller_id, buf + len);
 
 	if (IS_ENABLED(CONFIG_PRINTK_CALLER) || time) {
 		buf[len++] = ' ';
@@ -1334,72 +1312,143 @@ static size_t print_prefix(const struct printk_log *msg, bool syslog,
 	return len;
 }
 
-static size_t msg_print_text(const struct printk_log *msg, bool syslog,
-			     bool time, char *buf, size_t size)
+/*
+ * Prepare the record for printing. The text is shifted within the given
+ * buffer to avoid a need for another one. The following operations are
+ * done:
+ *
+ *   - Add prefix for each line.
+ *   - Add the trailing newline that has been removed in vprintk_store().
+ *   - Drop truncated lines that do not longer fit into the buffer.
+ *
+ * Return: The length of the updated/prepared text, including the added
+ * prefixes and the newline. The dropped line(s) are not counted.
+ */
+static size_t record_print_text(struct printk_record *r, bool syslog,
+				bool time)
 {
-	const char *text = log_text(msg);
-	size_t text_size = msg->text_len;
-	size_t len = 0;
+	size_t text_len = r->info->text_len;
+	size_t buf_size = r->text_buf_size;
+	char *text = r->text_buf;
 	char prefix[PREFIX_MAX];
-	const size_t prefix_len = print_prefix(msg, syslog, time, prefix);
+	bool truncated = false;
+	size_t prefix_len;
+	size_t line_len;
+	size_t len = 0;
+	char *next;
 
-	do {
-		const char *next = memchr(text, '\n', text_size);
-		size_t text_len;
+	prefix_len = info_print_prefix(r->info, syslog, time, prefix);
 
+	/*
+	 * @text_len: bytes of unprocessed text
+	 * @line_len: bytes of current line _without_ newline
+	 * @text:     pointer to beginning of current line
+	 * @len:      number of bytes prepared in r->text_buf
+	 */
+	for (;;) {
+		next = memchr(text, '\n', text_len);
 		if (next) {
-			text_len = next - text;
-			next++;
-			text_size -= next - text;
+			line_len = next - text;
 		} else {
-			text_len = text_size;
+			/* Drop truncated line(s). */
+			if (truncated)
+				break;
+			line_len = text_len;
 		}
 
-		if (buf) {
-			if (prefix_len + text_len + 1 >= size - len)
+		/*
+		 * Truncate the text if there is not enough space to add the
+		 * prefix and a trailing newline.
+		 */
+		if (len + prefix_len + text_len + 1 > buf_size) {
+			/* Drop even the current line if no space. */
+			if (len + prefix_len + line_len + 1 > buf_size)
 				break;
 
-			memcpy(buf + len, prefix, prefix_len);
-			len += prefix_len;
-			memcpy(buf + len, text, text_len);
-			len += text_len;
-			buf[len++] = '\n';
-		} else {
-			/* SYSLOG_ACTION_* buffer size only calculation */
-			len += prefix_len + text_len + 1;
+			text_len = buf_size - len - prefix_len - 1;
+			truncated = true;
 		}
 
-		text = next;
-	} while (text);
+		memmove(text + prefix_len, text, text_len);
+		memcpy(text, prefix, prefix_len);
+
+		len += prefix_len + line_len + 1;
+
+		if (text_len == line_len) {
+			/*
+			 * Add the trailing newline removed in
+			 * vprintk_store().
+			 */
+			text[prefix_len + line_len] = '\n';
+			break;
+		}
+
+		/*
+		 * Advance beyond the added prefix and the related line with
+		 * its newline.
+		 */
+		text += prefix_len + line_len + 1;
+
+		/*
+		 * The remaining text has only decreased by the line with its
+		 * newline.
+		 *
+		 * Note that @text_len can become zero. It happens when @text
+		 * ended with a newline (either due to truncation or the
+		 * original string ending with "\n\n"). The loop is correctly
+		 * repeated and (if not truncated) an empty line with a prefix
+		 * will be prepared.
+		 */
+		text_len -= line_len + 1;
+	}
 
 	return len;
 }
 
+static size_t get_record_print_text_size(struct printk_info *info,
+					 unsigned int line_count,
+					 bool syslog, bool time)
+{
+	char prefix[PREFIX_MAX];
+	size_t prefix_len;
+
+	prefix_len = info_print_prefix(info, syslog, time, prefix);
+
+	/*
+	 * Each line will be preceded with a prefix. The intermediate
+	 * newlines are already within the text, but a final trailing
+	 * newline will be added.
+	 */
+	return ((prefix_len * line_count) + info->text_len + 1);
+}
+
 static int syslog_print(char __user *buf, int size)
 {
+	struct printk_info info;
+	struct printk_record r;
 	char *text;
-	struct printk_log *msg;
 	int len = 0;
 
 	text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
 	if (!text)
 		return -ENOMEM;
 
+	prb_rec_init_rd(&r, &info, text, LOG_LINE_MAX + PREFIX_MAX, NULL, 0);
+
 	while (size > 0) {
 		size_t n;
 		size_t skip;
 
 		logbuf_lock_irq();
-		if (syslog_seq < log_first_seq) {
-			/* messages are gone, move to first one */
-			syslog_seq = log_first_seq;
-			syslog_idx = log_first_idx;
-			syslog_partial = 0;
-		}
-		if (syslog_seq == log_next_seq) {
+		if (!prb_read_valid(prb, syslog_seq, &r)) {
 			logbuf_unlock_irq();
 			break;
 		}
+		if (r.info->seq != syslog_seq) {
+			/* message is gone, move to next valid one */
+			syslog_seq = r.info->seq;
+			syslog_partial = 0;
+		}
 
 		/*
 		 * To keep reading/counting partial line consistent,
@@ -1409,13 +1458,10 @@ static int syslog_print(char __user *buf, int size)
 			syslog_time = printk_time;
 
 		skip = syslog_partial;
-		msg = log_from_idx(syslog_idx);
-		n = msg_print_text(msg, true, syslog_time, text,
-				   LOG_LINE_MAX + PREFIX_MAX);
+		n = record_print_text(&r, true, syslog_time);
 		if (n - syslog_partial <= size) {
 			/* message fits into buffer, move forward */
-			syslog_idx = log_next(syslog_idx);
-			syslog_seq++;
+			syslog_seq = r.info->seq + 1;
 			n -= syslog_partial;
 			syslog_partial = 0;
 		} else if (!len){
@@ -1446,11 +1492,12 @@ static int syslog_print(char __user *buf, int size)
 
 static int syslog_print_all(char __user *buf, int size, bool clear)
 {
+	struct printk_info info;
+	unsigned int line_count;
+	struct printk_record r;
 	char *text;
 	int len = 0;
-	u64 next_seq;
 	u64 seq;
-	u32 idx;
 	bool time;
 
 	text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
@@ -1463,38 +1510,28 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 	 * Find first record that fits, including all following records,
 	 * into the user-provided buffer for this dump.
 	 */
-	seq = clear_seq;
-	idx = clear_idx;
-	while (seq < log_next_seq) {
-		struct printk_log *msg = log_from_idx(idx);
-
-		len += msg_print_text(msg, true, time, NULL, 0);
-		idx = log_next(idx);
-		seq++;
-	}
+	prb_for_each_info(clear_seq, prb, seq, &info, &line_count)
+		len += get_record_print_text_size(&info, line_count, true, time);
 
 	/* move first record forward until length fits into the buffer */
-	seq = clear_seq;
-	idx = clear_idx;
-	while (len > size && seq < log_next_seq) {
-		struct printk_log *msg = log_from_idx(idx);
-
-		len -= msg_print_text(msg, true, time, NULL, 0);
-		idx = log_next(idx);
-		seq++;
+	prb_for_each_info(clear_seq, prb, seq, &info, &line_count) {
+		if (len <= size)
+			break;
+		len -= get_record_print_text_size(&info, line_count, true, time);
 	}
 
-	/* last message fitting into this dump */
-	next_seq = log_next_seq;
+	prb_rec_init_rd(&r, &info, text, LOG_LINE_MAX + PREFIX_MAX, NULL, 0);
 
 	len = 0;
-	while (len >= 0 && seq < next_seq) {
-		struct printk_log *msg = log_from_idx(idx);
-		int textlen = msg_print_text(msg, true, time, text,
-					     LOG_LINE_MAX + PREFIX_MAX);
+	prb_for_each_record(seq, prb, seq, &r) {
+		int textlen;
 
-		idx = log_next(idx);
-		seq++;
+		textlen = record_print_text(&r, true, time);
+
+		if (len + textlen > size) {
+			seq--;
+			break;
+		}
 
 		logbuf_unlock_irq();
 		if (copy_to_user(buf + len, text, textlen))
@@ -1503,17 +1540,12 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 			len += textlen;
 		logbuf_lock_irq();
 
-		if (seq < log_first_seq) {
-			/* messages are gone, move to next one */
-			seq = log_first_seq;
-			idx = log_first_idx;
-		}
+		if (len < 0)
+			break;
 	}
 
-	if (clear) {
-		clear_seq = log_next_seq;
-		clear_idx = log_next_idx;
-	}
+	if (clear)
+		clear_seq = seq;
 	logbuf_unlock_irq();
 
 	kfree(text);
@@ -1523,8 +1555,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
 static void syslog_clear(void)
 {
 	logbuf_lock_irq();
-	clear_seq = log_next_seq;
-	clear_idx = log_next_idx;
+	clear_seq = prb_next_seq(prb);
 	logbuf_unlock_irq();
 }
 
@@ -1551,7 +1582,7 @@ int do_syslog(int type, char __user *buf, int len, int source)
 		if (!access_ok(buf, len))
 			return -EFAULT;
 		error = wait_event_interruptible(log_wait,
-						 syslog_seq != log_next_seq);
+				prb_read_valid(prb, syslog_seq, NULL));
 		if (error)
 			return error;
 		error = syslog_print(buf, len);
@@ -1600,10 +1631,9 @@ int do_syslog(int type, char __user *buf, int len, int source)
 	/* Number of chars in the log buffer */
 	case SYSLOG_ACTION_SIZE_UNREAD:
 		logbuf_lock_irq();
-		if (syslog_seq < log_first_seq) {
+		if (syslog_seq < prb_first_valid_seq(prb)) {
 			/* messages are gone, move to first one */
-			syslog_seq = log_first_seq;
-			syslog_idx = log_first_idx;
+			syslog_seq = prb_first_valid_seq(prb);
 			syslog_partial = 0;
 		}
 		if (source == SYSLOG_FROM_PROC) {
@@ -1612,20 +1642,18 @@ int do_syslog(int type, char __user *buf, int len, int source)
 			 * for pending data, not the size; return the count of
 			 * records, not the length.
 			 */
-			error = log_next_seq - syslog_seq;
+			error = prb_next_seq(prb) - syslog_seq;
 		} else {
-			u64 seq = syslog_seq;
-			u32 idx = syslog_idx;
 			bool time = syslog_partial ? syslog_time : printk_time;
-
-			while (seq < log_next_seq) {
-				struct printk_log *msg = log_from_idx(idx);
-
-				error += msg_print_text(msg, true, time, NULL,
-							0);
+			struct printk_info info;
+			unsigned int line_count;
+			u64 seq;
+
+			prb_for_each_info(syslog_seq, prb, seq, &info,
+					  &line_count) {
+				error += get_record_print_text_size(&info, line_count,
+								    true, time);
 				time = printk_time;
-				idx = log_next(idx);
-				seq++;
 			}
 			error -= syslog_partial;
 		}
@@ -1796,10 +1824,22 @@ static int console_trylock_spinning(void)
 static void call_console_drivers(const char *ext_text, size_t ext_len,
 				 const char *text, size_t len)
 {
+	static char dropped_text[64];
+	size_t dropped_len = 0;
 	struct console *con;
 
 	trace_console_rcuidle(text, len);
 
+	if (!console_drivers)
+		return;
+
+	if (console_dropped) {
+		dropped_len = snprintf(dropped_text, sizeof(dropped_text),
+				       "** %lu printk messages dropped **\n",
+				       console_dropped);
+		console_dropped = 0;
+	}
+
 	for_each_console(con) {
 		if (exclusive_console && con != exclusive_console)
 			continue;
@@ -1812,8 +1852,11 @@ static void call_console_drivers(const char *ext_text, size_t ext_len,
 			continue;
 		if (con->flags & CON_EXTENDED)
 			con->write(con, ext_text, ext_len);
-		else
+		else {
+			if (dropped_len)
+				con->write(con, dropped_text, dropped_len);
 			con->write(con, text, len);
+		}
 	}
 }
 
@@ -2076,21 +2119,24 @@ EXPORT_SYMBOL(printk);
 #define PREFIX_MAX		0
 #define printk_time		false
 
+#define prb_read_valid(rb, seq, r)	false
+#define prb_first_valid_seq(rb)		0
+
 static u64 syslog_seq;
-static u32 syslog_idx;
 static u64 console_seq;
-static u32 console_idx;
 static u64 exclusive_console_stop_seq;
-static u64 log_first_seq;
-static u32 log_first_idx;
-static u64 log_next_seq;
-static char *log_text(const struct printk_log *msg) { return NULL; }
-static char *log_dict(const struct printk_log *msg) { return NULL; }
-static struct printk_log *log_from_idx(u32 idx) { return NULL; }
-static u32 log_next(u32 idx) { return 0; }
-static ssize_t msg_print_ext_header(char *buf, size_t size,
-				    struct printk_log *msg,
-				    u64 seq) { return 0; }
+static unsigned long console_dropped;
+
+static size_t record_print_text(const struct printk_record *r,
+				bool syslog, bool time)
+{
+	return 0;
+}
+static ssize_t info_print_ext_header(char *buf, size_t size,
+				     struct printk_info *info)
+{
+	return 0;
+}
 static ssize_t msg_print_ext_body(char *buf, size_t size,
 				  char *dict, size_t dict_len,
 				  char *text, size_t text_len) { return 0; }
@@ -2098,8 +2144,6 @@ static void console_lock_spinning_enable(void) { }
 static int console_lock_spinning_disable_and_check(void) { return 0; }
 static void call_console_drivers(const char *ext_text, size_t ext_len,
 				 const char *text, size_t len) {}
-static size_t msg_print_text(const struct printk_log *msg, bool syslog,
-			     bool time, char *buf, size_t size) { return 0; }
 static bool suppress_message_printing(int level) { return false; }
 
 #endif /* CONFIG_PRINTK */
@@ -2384,14 +2428,19 @@ void console_unlock(void)
 {
 	static char ext_text[CONSOLE_EXT_LOG_MAX];
 	static char text[LOG_LINE_MAX + PREFIX_MAX];
+	static char dict[LOG_LINE_MAX];
 	unsigned long flags;
 	bool do_cond_resched, retry;
+	struct printk_info info;
+	struct printk_record r;
 
 	if (console_suspended) {
 		up_console_sem();
 		return;
 	}
 
+	prb_rec_init_rd(&r, &info, text, sizeof(text), dict, sizeof(dict));
+
 	/*
 	 * Console drivers are called with interrupts disabled, so
 	 * @console_may_schedule should be cleared before; however, we may
@@ -2422,35 +2471,26 @@ void console_unlock(void)
 	}
 
 	for (;;) {
-		struct printk_log *msg;
 		size_t ext_len = 0;
 		size_t len;
 
 		printk_safe_enter_irqsave(flags);
 		raw_spin_lock(&logbuf_lock);
-		if (console_seq < log_first_seq) {
-			len = snprintf(text, sizeof(text),
-				       "** %llu printk messages dropped **\n",
-				       log_first_seq - console_seq);
-
-			/* messages are gone, move to first one */
-			console_seq = log_first_seq;
-			console_idx = log_first_idx;
-		} else {
-			len = 0;
-		}
 skip:
-		if (console_seq == log_next_seq)
+		if (!prb_read_valid(prb, console_seq, &r))
 			break;
 
-		msg = log_from_idx(console_idx);
-		if (suppress_message_printing(msg->level)) {
+		if (console_seq != r.info->seq) {
+			console_dropped += r.info->seq - console_seq;
+			console_seq = r.info->seq;
+		}
+
+		if (suppress_message_printing(r.info->level)) {
 			/*
 			 * Skip record we have buffered and already printed
 			 * directly to the console when we received it, and
 			 * record that has level above the console loglevel.
 			 */
-			console_idx = log_next(console_idx);
 			console_seq++;
 			goto skip;
 		}
@@ -2461,19 +2501,24 @@ void console_unlock(void)
 			exclusive_console = NULL;
 		}
 
-		len += msg_print_text(msg,
-				console_msg_format & MSG_FORMAT_SYSLOG,
-				printk_time, text + len, sizeof(text) - len);
+		/*
+		 * Handle extended console text first because later
+		 * record_print_text() will modify the record buffer in-place.
+		 */
 		if (nr_ext_console_drivers) {
-			ext_len = msg_print_ext_header(ext_text,
+			ext_len = info_print_ext_header(ext_text,
 						sizeof(ext_text),
-						msg, console_seq);
+						r.info);
 			ext_len += msg_print_ext_body(ext_text + ext_len,
 						sizeof(ext_text) - ext_len,
-						log_dict(msg), msg->dict_len,
-						log_text(msg), msg->text_len);
+						&r.dict_buf[0],
+						r.info->dict_len,
+						&r.text_buf[0],
+						r.info->text_len);
 		}
-		console_idx = log_next(console_idx);
+		len = record_print_text(&r,
+				console_msg_format & MSG_FORMAT_SYSLOG,
+				printk_time);
 		console_seq++;
 		raw_spin_unlock(&logbuf_lock);
 
@@ -2513,7 +2558,7 @@ void console_unlock(void)
 	 * flush, no worries.
 	 */
 	raw_spin_lock(&logbuf_lock);
-	retry = console_seq != log_next_seq;
+	retry = prb_read_valid(prb, console_seq, NULL);
 	raw_spin_unlock(&logbuf_lock);
 	printk_safe_exit_irqrestore(flags);
 
@@ -2582,8 +2627,7 @@ void console_flush_on_panic(enum con_flush_mode mode)
 		unsigned long flags;
 
 		logbuf_lock_irqsave(flags);
-		console_seq = log_first_seq;
-		console_idx = log_first_idx;
+		console_seq = prb_first_valid_seq(prb);
 		logbuf_unlock_irqrestore(flags);
 	}
 	console_unlock();
@@ -2826,7 +2870,6 @@ void register_console(struct console *newcon)
 		exclusive_console = newcon;
 		exclusive_console_stop_seq = console_seq;
 		console_seq = syslog_seq;
-		console_idx = syslog_idx;
 		logbuf_unlock_irqrestore(flags);
 	}
 	console_unlock();
@@ -3215,9 +3258,7 @@ void kmsg_dump(enum kmsg_dump_reason reason)
 
 		logbuf_lock_irqsave(flags);
 		dumper->cur_seq = clear_seq;
-		dumper->cur_idx = clear_idx;
-		dumper->next_seq = log_next_seq;
-		dumper->next_idx = log_next_idx;
+		dumper->next_seq = prb_next_seq(prb);
 		logbuf_unlock_irqrestore(flags);
 
 		/* invoke dumper which will iterate over records */
@@ -3251,28 +3292,33 @@ void kmsg_dump(enum kmsg_dump_reason reason)
 bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
 			       char *line, size_t size, size_t *len)
 {
-	struct printk_log *msg;
+	struct printk_info info;
+	unsigned int line_count;
+	struct printk_record r;
 	size_t l = 0;
 	bool ret = false;
 
+	prb_rec_init_rd(&r, &info, line, size, NULL, 0);
+
 	if (!dumper->active)
 		goto out;
 
-	if (dumper->cur_seq < log_first_seq) {
-		/* messages are gone, move to first available one */
-		dumper->cur_seq = log_first_seq;
-		dumper->cur_idx = log_first_idx;
-	}
-
-	/* last entry */
-	if (dumper->cur_seq >= log_next_seq)
-		goto out;
+	/* Read text or count text lines? */
+	if (line) {
+		if (!prb_read_valid(prb, dumper->cur_seq, &r))
+			goto out;
+		l = record_print_text(&r, syslog, printk_time);
+	} else {
+		if (!prb_read_valid_info(prb, dumper->cur_seq,
+					 &info, &line_count)) {
+			goto out;
+		}
+		l = get_record_print_text_size(&info, line_count, syslog,
+					       printk_time);
 
-	msg = log_from_idx(dumper->cur_idx);
-	l = msg_print_text(msg, syslog, printk_time, line, size);
+	}
 
-	dumper->cur_idx = log_next(dumper->cur_idx);
-	dumper->cur_seq++;
+	dumper->cur_seq = r.info->seq + 1;
 	ret = true;
 out:
 	if (len)
@@ -3333,23 +3379,25 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
 bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
 			  char *buf, size_t size, size_t *len)
 {
+	struct printk_info info;
+	unsigned int line_count;
+	struct printk_record r;
 	unsigned long flags;
 	u64 seq;
-	u32 idx;
 	u64 next_seq;
-	u32 next_idx;
 	size_t l = 0;
 	bool ret = false;
 	bool time = printk_time;
 
-	if (!dumper->active)
+	prb_rec_init_rd(&r, &info, buf, size, NULL, 0);
+
+	if (!dumper->active || !buf || !size)
 		goto out;
 
 	logbuf_lock_irqsave(flags);
-	if (dumper->cur_seq < log_first_seq) {
+	if (dumper->cur_seq < prb_first_valid_seq(prb)) {
 		/* messages are gone, move to first available one */
-		dumper->cur_seq = log_first_seq;
-		dumper->cur_idx = log_first_idx;
+		dumper->cur_seq = prb_first_valid_seq(prb);
 	}
 
 	/* last entry */
@@ -3360,41 +3408,41 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
 
 	/* calculate length of entire buffer */
 	seq = dumper->cur_seq;
-	idx = dumper->cur_idx;
-	while (seq < dumper->next_seq) {
-		struct printk_log *msg = log_from_idx(idx);
-
-		l += msg_print_text(msg, true, time, NULL, 0);
-		idx = log_next(idx);
-		seq++;
+	while (prb_read_valid_info(prb, seq, &info, &line_count)) {
+		if (r.info->seq >= dumper->next_seq)
+			break;
+		l += get_record_print_text_size(&info, line_count, true, time);
+		seq = r.info->seq + 1;
 	}
 
 	/* move first record forward until length fits into the buffer */
 	seq = dumper->cur_seq;
-	idx = dumper->cur_idx;
-	while (l >= size && seq < dumper->next_seq) {
-		struct printk_log *msg = log_from_idx(idx);
-
-		l -= msg_print_text(msg, true, time, NULL, 0);
-		idx = log_next(idx);
-		seq++;
+	while (l >= size && prb_read_valid_info(prb, seq,
+						&info, &line_count)) {
+		if (r.info->seq >= dumper->next_seq)
+			break;
+		l -= get_record_print_text_size(&info, line_count, true, time);
+		seq = r.info->seq + 1;
 	}
 
 	/* last message in next interation */
 	next_seq = seq;
-	next_idx = idx;
 
+	/* actually read text into the buffer now */
 	l = 0;
-	while (seq < dumper->next_seq) {
-		struct printk_log *msg = log_from_idx(idx);
+	while (prb_read_valid(prb, seq, &r)) {
+		if (r.info->seq >= dumper->next_seq)
+			break;
+
+		l += record_print_text(&r, syslog, time);
+
+		/* adjust record to store to remaining buffer space */
+		prb_rec_init_rd(&r, &info, buf + l, size - l, NULL, 0);
 
-		l += msg_print_text(msg, syslog, time, buf + l, size - l);
-		idx = log_next(idx);
-		seq++;
+		seq = r.info->seq + 1;
 	}
 
 	dumper->next_seq = next_seq;
-	dumper->next_idx = next_idx;
 	ret = true;
 	logbuf_unlock_irqrestore(flags);
 out:
@@ -3417,9 +3465,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
 void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
 {
 	dumper->cur_seq = clear_seq;
-	dumper->cur_idx = clear_idx;
-	dumper->next_seq = log_next_seq;
-	dumper->next_idx = log_next_idx;
+	dumper->next_seq = prb_next_seq(prb);
 }
 
 /**
-- 
2.20.1

[printk] 96d5c61b1f: stress-ng.timerfd.ops_per_sec 8.3% improvement

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 36898 bytes --]

Greeting,

FYI, we noticed a 8.3% improvement of stress-ng.timerfd.ops_per_sec due to commit:


commit: 96d5c61b1fff364edfae607e2bf2a66ee9616ff2 ("[PATCH v5 4/4] printk: use the lockless ringbuffer")
url: https://github.com/0day-ci/linux/commits/John-Ogness/printk-replace-ringbuffer/20200709-212623
base: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git 9ebcfadb0610322ac537dd7aa5d9cbc2b2894c68

in testcase: stress-ng
on test machine: 96 threads Intel(R) Xeon(R) Gold 6252 CPU @ 2.10GHz with 256G memory
with following parameters:

	nr_threads: 100%
	disk: 1HDD
	testtime: 30s
	class: interrupt
	cpufreq_governor: performance
	ucode: 0x5002f01






Details are as below:
-------------------------------------------------------------------------------------------------->


To reproduce:

        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp install job.yaml  # job file is attached in this email
        bin/lkp run     job.yaml

=========================================================================================
class/compiler/cpufreq_governor/disk/kconfig/nr_threads/rootfs/tbox_group/testcase/testtime/ucode:
  interrupt/gcc-9/performance/1HDD/x86_64-rhel-8.3/100%/debian-10.4-x86_64-20200603.cgz/lkp-csl-2sp6/stress-ng/30s/0x5002f01

commit: 
  72621a0b10 ("Revert "printk: lock/unlock console only for new logbuf entries"")
  96d5c61b1f ("printk: use the lockless ringbuffer")

72621a0b1077a8ad 96d5c61b1fff364edfae607e2bf 
---------------- --------------------------- 
         %stddev     %change         %stddev
             \          |                \  
 2.274e+08           +18.6%  2.697e+08        stress-ng.sigq.ops
   7580582           +18.6%    8991276        stress-ng.sigq.ops_per_sec
 1.513e+08 ±  5%      -8.3%  1.387e+08 ±  2%  stress-ng.time.involuntary_context_switches
 3.768e+08 ±  3%      -5.9%  3.544e+08 ±  2%  stress-ng.time.voluntary_context_switches
 1.598e+09 ±  2%      +8.3%   1.73e+09        stress-ng.timerfd.ops
  53265971 ±  2%      +8.3%   57674750        stress-ng.timerfd.ops_per_sec
 3.716e+08 ±  2%     +10.7%  4.115e+08 ±  3%  cpuidle.C1.time
    174505 ± 10%     -14.5%     149157 ± 13%  numa-meminfo.node0.AnonHugePages
     32959            +2.1%      33668        proc-vmstat.nr_slab_reclaimable
     90647 ± 43%     -60.2%      36039 ±124%  numa-vmstat.node0.numa_other
     71315 ± 55%     +76.4%     125804 ± 35%  numa-vmstat.node1.numa_other
   1075081 ±  3%      -5.6%    1014755        vmstat.system.cs
   3762322            +4.7%    3940838        vmstat.system.in
     61530 ±  3%     -12.1%      54104 ±  4%  slabinfo.Acpi-State.active_objs
      1209 ±  3%     -11.9%       1065 ±  4%  slabinfo.Acpi-State.active_slabs
     61710 ±  3%     -11.9%      54359 ±  4%  slabinfo.Acpi-State.num_objs
      1209 ±  3%     -11.9%       1065 ±  4%  slabinfo.Acpi-State.num_slabs
     47136 ±  5%      +6.0%      49962 ±  6%  softirqs.CPU11.SCHED
     45028 ±  2%     +22.3%      55067 ± 10%  softirqs.CPU16.SCHED
     44744 ±  2%     +22.1%      54634 ±  5%  softirqs.CPU19.SCHED
     45345 ±  2%     +20.7%      54736 ±  8%  softirqs.CPU23.SCHED
     51163 ±  8%     -10.2%      45932        softirqs.CPU30.SCHED
     50701 ±  9%     -10.2%      45552        softirqs.CPU36.SCHED
     50848 ±  3%     -11.0%      45253        softirqs.CPU41.SCHED
     46949 ±  6%     +17.2%      55030 ±  4%  softirqs.CPU51.SCHED
     45567 ±  2%     +15.4%      52589 ± 11%  softirqs.CPU55.SCHED
     45734           +13.5%      51922 ±  9%  softirqs.CPU64.SCHED
     45342           +15.4%      52344 ±  5%  softirqs.CPU67.SCHED
     45901           +13.4%      52030 ±  9%  softirqs.CPU68.SCHED
     45578           +16.8%      53235 ±  7%  softirqs.CPU69.SCHED
     50784 ±  8%      -9.3%      46080        softirqs.CPU77.SCHED
   1187223 ± 26%     -47.3%     626108 ± 43%  sched_debug.cfs_rq:/.MIN_vruntime.avg
     44095 ± 13%     -37.3%      27628 ± 16%  sched_debug.cfs_rq:/.load.avg
     87004 ±  2%     -24.3%      65828 ± 13%  sched_debug.cfs_rq:/.load.stddev
   1187223 ± 26%     -47.3%     626108 ± 43%  sched_debug.cfs_rq:/.max_vruntime.avg
     87.24 ± 10%     -17.7%      71.80 ±  7%  sched_debug.cfs_rq:/.nr_spread_over.avg
     10.92 ±  8%     -25.6%       8.12 ± 10%  sched_debug.cfs_rq:/.nr_spread_over.min
     95.86 ± 12%     -15.1%      81.42 ±  9%  sched_debug.cfs_rq:/.nr_spread_over.stddev
    133.70 ± 30%     -81.5%      24.68 ±173%  sched_debug.cfs_rq:/.removed.load_avg.max
     58.28 ± 25%     -80.1%      11.62 ±173%  sched_debug.cfs_rq:/.removed.runnable_avg.max
      6.81 ± 25%     -77.8%       1.51 ±173%  sched_debug.cfs_rq:/.removed.runnable_avg.stddev
    744305 ± 35%     -57.0%     319901 ± 93%  sched_debug.cfs_rq:/.spread0.avg
     27562 ±  8%     -48.5%      14191 ± 13%  sched_debug.cpu.curr->pid.avg
     35526 ±  5%     -42.5%      20423 ± 11%  sched_debug.cpu.curr->pid.max
     14383 ± 47%     -55.9%       6346 ± 36%  sched_debug.cpu.curr->pid.min
     39.65 ±  4%     +16.5%      46.19 ±  7%  sched_debug.cpu.nr_running.avg
      1.17 ± 25%     -76.2%       0.28 ±163%  sched_debug.cpu.nr_uninterruptible.avg
   3769782 ±  4%      -8.4%    3451639 ±  3%  sched_debug.cpu.sched_count.max
      0.00       +2.2e+104%     216.75 ±138%  interrupts.102:PCI-MSI.31981635-edge.i40e-eth0-TxRx-66
   8246728 ±  4%      +7.0%    8826785        interrupts.CAL:Function_call_interrupts
     65853 ±  7%     +35.4%      89155 ± 18%  interrupts.CPU19.CAL:Function_call_interrupts
    133669 ±  7%     +79.6%     240043 ± 33%  interrupts.CPU19.RES:Rescheduling_interrupts
     85710 ±  6%     +13.6%      97401        interrupts.CPU32.CAL:Function_call_interrupts
    201257 ±  3%     -12.8%     175586 ±  4%  interrupts.CPU42.RES:Rescheduling_interrupts
      7732           -38.0%       4798 ± 34%  interrupts.CPU45.NMI:Non-maskable_interrupts
      7732           -38.0%       4798 ± 34%  interrupts.CPU45.PMI:Performance_monitoring_interrupts
    197808 ±  4%      -7.1%     183824 ±  6%  interrupts.CPU46.RES:Rescheduling_interrupts
    149600 ± 16%     +70.4%     254923 ± 25%  interrupts.CPU54.RES:Rescheduling_interrupts
    150479 ± 16%     +64.7%     247795 ± 37%  interrupts.CPU57.RES:Rescheduling_interrupts
    150695 ± 16%     +48.9%     224356 ± 22%  interrupts.CPU60.RES:Rescheduling_interrupts
     60718 ±  6%     +18.7%      72058 ±  3%  interrupts.CPU62.CAL:Function_call_interrupts
     68390 ±  4%     +20.6%      82506 ± 10%  interrupts.CPU63.CAL:Function_call_interrupts
      0.00       +2.2e+104%     216.25 ±138%  interrupts.CPU66.102:PCI-MSI.31981635-edge.i40e-eth0-TxRx-66
     62888 ±  4%     +22.3%      76902 ±  8%  interrupts.CPU7.CAL:Function_call_interrupts
     62071 ± 10%     +29.5%      80355 ± 10%  interrupts.CPU71.CAL:Function_call_interrupts
    231484 ± 21%     -25.0%     173696 ±  3%  interrupts.CPU75.RES:Rescheduling_interrupts
    234587 ± 12%     -17.0%     194613 ± 13%  interrupts.CPU77.RES:Rescheduling_interrupts
    209574 ±  3%     -15.0%     178038 ±  4%  interrupts.CPU83.RES:Rescheduling_interrupts
     87531 ±  4%     +31.1%     114721 ±  7%  interrupts.CPU88.CAL:Function_call_interrupts
      7732           -37.8%       4806 ± 34%  interrupts.CPU89.NMI:Non-maskable_interrupts
      7732           -37.8%       4806 ± 34%  interrupts.CPU89.PMI:Performance_monitoring_interrupts
     94766 ±  7%     +19.1%     112844 ± 10%  interrupts.CPU91.CAL:Function_call_interrupts
     91308 ±  6%     +22.9%     112175 ±  8%  interrupts.CPU92.CAL:Function_call_interrupts
     87571 ± 11%     +31.6%     115238 ± 14%  interrupts.CPU94.CAL:Function_call_interrupts
      7.54           +13.5%       8.56 ± 19%  perf-stat.i.MPKI
 1.312e+10            -2.8%  1.276e+10        perf-stat.i.branch-instructions
 1.246e+08            -1.4%  1.228e+08        perf-stat.i.branch-misses
  71092689 ±  3%     -19.7%   57085156 ±  2%  perf-stat.i.cache-misses
 2.672e+08           -10.2%    2.4e+08        perf-stat.i.cache-references
    100471            -4.4%      96054        perf-stat.i.cpu-clock
 2.436e+11            -5.8%  2.295e+11        perf-stat.i.cpu-cycles
     28918 ±  2%      +8.8%      31448 ±  2%  perf-stat.i.cycles-between-cache-misses
      0.03 ±  5%      +0.0        0.05 ± 68%  perf-stat.i.dTLB-load-miss-rate%
   3585193 ±  5%     -17.4%    2960337 ±  3%  perf-stat.i.dTLB-load-misses
      0.06            +0.0        0.06 ± 11%  perf-stat.i.dTLB-store-miss-rate%
   6767973            -6.1%    6356168 ±  2%  perf-stat.i.dTLB-store-misses
  1.05e+10            -1.4%  1.036e+10        perf-stat.i.dTLB-stores
   7143251 ±  4%      -7.7%    6593711 ±  2%  perf-stat.i.iTLB-loads
 6.422e+10            -2.4%  6.265e+10        perf-stat.i.instructions
      2.55            -2.7%       2.48        perf-stat.i.metric.GHz
      0.63 ±  3%     +10.7%       0.70 ±  5%  perf-stat.i.metric.K/sec
     92744            -3.1%      89912        perf-stat.i.minor-faults
     87.88            -1.4       86.43        perf-stat.i.node-load-miss-rate%
   8868728 ± 13%     -46.6%    4739379 ±  3%  perf-stat.i.node-loads
     94.74            -3.0       91.76 ±  2%  perf-stat.i.node-store-miss-rate%
   2508354 ± 11%     -33.3%    1673742        perf-stat.i.node-stores
    691526            -1.6%     680596        perf-stat.i.page-faults
     99599            -3.6%      96043        perf-stat.i.task-clock
      4.23            -4.5%       4.04        perf-stat.overall.MPKI
      0.95            +0.0        0.96        perf-stat.overall.branch-miss-rate%
      3.84            -2.4%       3.74        perf-stat.overall.cpi
      0.02 ±  3%      -0.0        0.02 ±  2%  perf-stat.overall.dTLB-load-miss-rate%
      0.06            -0.0        0.06 ±  2%  perf-stat.overall.dTLB-store-miss-rate%
      0.26            +2.5%       0.27        perf-stat.overall.ipc
     47.96            +4.3       52.28 ±  3%  perf-stat.overall.node-load-miss-rate%
     70.13            +2.3       72.43 ±  2%  perf-stat.overall.node-store-miss-rate%
 1.232e+10            +2.0%  1.257e+10        perf-stat.ps.branch-instructions
 1.166e+08            +3.3%  1.205e+08        perf-stat.ps.branch-misses
  67786783            -5.2%   64234227 ±  4%  perf-stat.ps.cache-misses
   1078561 ±  3%      -5.5%    1019000        perf-stat.ps.context-switches
 1.714e+10            +2.3%  1.753e+10        perf-stat.ps.dTLB-loads
 9.794e+09            +2.6%  1.005e+10        perf-stat.ps.dTLB-stores
  87676758            +4.4%   91553262        perf-stat.ps.iTLB-load-misses
  6.02e+10            +2.2%   6.15e+10        perf-stat.ps.instructions
   9026151           -12.8%    7873090 ± 10%  perf-stat.ps.node-loads
   2511686            -9.8%    2265767 ±  6%  perf-stat.ps.node-stores
    642630            +1.6%     652856        perf-stat.ps.page-faults
  3.27e+13            +2.2%  3.341e+13        perf-stat.total.instructions
     26.27 ±  2%      -2.7       23.56 ±  2%  perf-profile.calltrace.cycles-pp.security_task_kill.group_send_sig_info.kill_pid_info.do_rt_sigqueueinfo.__x64_sys_rt_sigqueueinfo
     26.23 ±  2%      -2.7       23.52 ±  2%  perf-profile.calltrace.cycles-pp.apparmor_task_kill.security_task_kill.group_send_sig_info.kill_pid_info.do_rt_sigqueueinfo
     26.45 ±  2%      -2.7       23.74 ±  2%  perf-profile.calltrace.cycles-pp.group_send_sig_info.kill_pid_info.do_rt_sigqueueinfo.__x64_sys_rt_sigqueueinfo.do_syscall_64
     13.52 ±  2%      -2.4       11.11 ±  2%  perf-profile.calltrace.cycles-pp.aa_get_task_label.apparmor_task_kill.security_task_kill.group_send_sig_info.kill_pid_info
     47.08            -2.4       44.67        perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe
     47.16            -2.4       44.76        perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe
     46.12            -2.3       43.82        perf-profile.calltrace.cycles-pp.kill_pid_info.do_rt_sigqueueinfo.__x64_sys_rt_sigqueueinfo.do_syscall_64.entry_SYSCALL_64_after_hwframe
     46.36            -2.3       44.07        perf-profile.calltrace.cycles-pp.do_rt_sigqueueinfo.__x64_sys_rt_sigqueueinfo.do_syscall_64.entry_SYSCALL_64_after_hwframe
     46.71            -2.3       44.43        perf-profile.calltrace.cycles-pp.__x64_sys_rt_sigqueueinfo.do_syscall_64.entry_SYSCALL_64_after_hwframe
      2.99 ± 14%      -1.0        1.98 ± 14%  perf-profile.calltrace.cycles-pp.__lll_unlock_wake
      2.83 ± 14%      -1.0        1.83 ± 15%  perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.__lll_unlock_wake
      2.80 ± 14%      -1.0        1.81 ± 15%  perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.__lll_unlock_wake
      2.67 ± 14%      -0.9        1.73 ± 15%  perf-profile.calltrace.cycles-pp.__x64_sys_futex.do_syscall_64.entry_SYSCALL_64_after_hwframe.__lll_unlock_wake
      2.63 ± 14%      -0.9        1.70 ± 15%  perf-profile.calltrace.cycles-pp.do_futex.__x64_sys_futex.do_syscall_64.entry_SYSCALL_64_after_hwframe.__lll_unlock_wake
      7.36 ±  3%      -0.7        6.70 ±  2%  perf-profile.calltrace.cycles-pp.__lll_lock_wait
      6.73 ±  3%      -0.6        6.14 ±  2%  perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.__lll_lock_wait
      6.71 ±  3%      -0.6        6.13 ±  2%  perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.__lll_lock_wait
      4.23 ±  4%      -0.5        3.77 ±  3%  perf-profile.calltrace.cycles-pp.__x64_sys_futex.do_syscall_64.entry_SYSCALL_64_after_hwframe.__lll_lock_wait
      4.19 ±  4%      -0.5        3.74 ±  3%  perf-profile.calltrace.cycles-pp.do_futex.__x64_sys_futex.do_syscall_64.entry_SYSCALL_64_after_hwframe.__lll_lock_wait
      5.59 ±  2%      -0.4        5.22 ±  2%  perf-profile.calltrace.cycles-pp.futex_wait.do_futex.__x64_sys_futex.do_syscall_64.entry_SYSCALL_64_after_hwframe
      4.78 ±  2%      -0.3        4.47 ±  2%  perf-profile.calltrace.cycles-pp.futex_wait_queue_me.futex_wait.do_futex.__x64_sys_futex.do_syscall_64
      0.52 ±  2%      -0.3        0.25 ±100%  perf-profile.calltrace.cycles-pp.__lock_task_sighand.do_send_sig_info.kill_pid_info.do_rt_sigqueueinfo.__x64_sys_rt_sigqueueinfo
      4.12 ±  2%      -0.2        3.88 ±  2%  perf-profile.calltrace.cycles-pp.schedule.futex_wait_queue_me.futex_wait.do_futex.__x64_sys_futex
      4.06 ±  2%      -0.2        3.81 ±  2%  perf-profile.calltrace.cycles-pp.__sched_text_start.schedule.futex_wait_queue_me.futex_wait.do_futex
      0.76 ±  4%      -0.1        0.62 ±  6%  perf-profile.calltrace.cycles-pp._raw_spin_lock.__sched_text_start.schedule.futex_wait_queue_me.futex_wait
      0.69 ±  4%      -0.1        0.56 ±  6%  perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock.__sched_text_start.schedule.futex_wait_queue_me
      1.08 ±  3%      -0.1        0.99        perf-profile.calltrace.cycles-pp.get_signal.do_signal.__prepare_exit_to_usermode.do_syscall_64.entry_SYSCALL_64_after_hwframe
      1.32 ±  2%      -0.1        1.24        perf-profile.calltrace.cycles-pp.stack_trace_save_tsk.__account_scheduler_latency.update_stats_enqueue_sleeper.enqueue_entity.enqueue_task_fair
      0.75 ±  4%      -0.1        0.68 ±  3%  perf-profile.calltrace.cycles-pp.dequeue_signal.get_signal.do_signal.__prepare_exit_to_usermode.do_syscall_64
      0.96 ±  3%      -0.1        0.90        perf-profile.calltrace.cycles-pp.generic_file_buffered_read.new_sync_read.vfs_read.ksys_pread64.do_syscall_64
      1.08 ±  3%      -0.1        1.02        perf-profile.calltrace.cycles-pp.new_sync_read.vfs_read.ksys_pread64.do_syscall_64.entry_SYSCALL_64_after_hwframe
      0.77            -0.1        0.71        perf-profile.calltrace.cycles-pp.__pthread_mutex_lock
      0.73 ±  2%      -0.0        0.68 ±  3%  perf-profile.calltrace.cycles-pp.dequeue_task_fair.__sched_text_start.schedule.futex_wait_queue_me.futex_wait
      0.55            +0.0        0.56        perf-profile.calltrace.cycles-pp.select_idle_sibling.select_task_rq_fair.try_to_wake_up.signal_wake_up_state.__send_signal
      0.64 ±  2%      +0.1        0.70 ±  2%  perf-profile.calltrace.cycles-pp.aa_may_signal.apparmor_task_kill.security_task_kill.group_send_sig_info.kill_pid_info
      1.47            +0.1        1.55        perf-profile.calltrace.cycles-pp.__x64_sys_futex.do_syscall_64.entry_SYSCALL_64_after_hwframe.pthread_cond_timedwait@@GLIBC_2.3.2
      1.43            +0.1        1.51        perf-profile.calltrace.cycles-pp.do_futex.__x64_sys_futex.do_syscall_64.entry_SYSCALL_64_after_hwframe.pthread_cond_timedwait@@GLIBC_2.3.2
      1.56            +0.1        1.65        perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.pthread_cond_timedwait@@GLIBC_2.3.2
      1.58            +0.1        1.67        perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.pthread_cond_timedwait@@GLIBC_2.3.2
      1.79            +0.1        1.88        perf-profile.calltrace.cycles-pp.pthread_cond_timedwait@@GLIBC_2.3.2
      0.74 ±  9%      +0.2        0.98 ±  4%  perf-profile.calltrace.cycles-pp.enqueue_entity.enqueue_task_fair.activate_task.ttwu_do_activate.sched_ttwu_pending
      0.76 ±  8%      +0.2        1.00 ±  4%  perf-profile.calltrace.cycles-pp.ttwu_do_activate.sched_ttwu_pending.__sysvec_call_function_single.asm_call_on_stack.sysvec_call_function_single
      0.76 ±  8%      +0.2        1.00 ±  4%  perf-profile.calltrace.cycles-pp.activate_task.ttwu_do_activate.sched_ttwu_pending.__sysvec_call_function_single.asm_call_on_stack
      0.76 ±  8%      +0.2        1.00 ±  4%  perf-profile.calltrace.cycles-pp.enqueue_task_fair.activate_task.ttwu_do_activate.sched_ttwu_pending.__sysvec_call_function_single
      0.81 ±  8%      +0.3        1.07 ±  4%  perf-profile.calltrace.cycles-pp.sched_ttwu_pending.__sysvec_call_function_single.asm_call_on_stack.sysvec_call_function_single.asm_sysvec_call_function_single
      0.84 ±  8%      +0.3        1.09 ±  4%  perf-profile.calltrace.cycles-pp.asm_call_on_stack.sysvec_call_function_single.asm_sysvec_call_function_single.finish_task_switch.__sched_text_start
      0.85 ±  7%      +0.3        1.11 ±  4%  perf-profile.calltrace.cycles-pp.sysvec_call_function_single.asm_sysvec_call_function_single.finish_task_switch.__sched_text_start.schedule_idle
      0.83 ±  8%      +0.3        1.09 ±  4%  perf-profile.calltrace.cycles-pp.__sysvec_call_function_single.asm_call_on_stack.sysvec_call_function_single.asm_sysvec_call_function_single.finish_task_switch
      0.91 ±  7%      +0.3        1.18 ±  4%  perf-profile.calltrace.cycles-pp.finish_task_switch.__sched_text_start.schedule_idle.do_idle.cpu_startup_entry
      0.88 ±  7%      +0.3        1.15 ±  4%  perf-profile.calltrace.cycles-pp.asm_sysvec_call_function_single.finish_task_switch.__sched_text_start.schedule_idle.do_idle
      1.57 ± 10%      +0.4        1.95 ±  5%  perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock.try_to_wake_up.wake_up_q.futex_wake
      1.60 ± 10%      +0.4        1.98 ±  5%  perf-profile.calltrace.cycles-pp._raw_spin_lock.try_to_wake_up.wake_up_q.futex_wake.do_futex
      4.32 ±  7%      +0.7        5.00 ±  3%  perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock.__sched_text_start.schedule_idle.do_idle
      4.38 ±  6%      +0.7        5.06 ±  3%  perf-profile.calltrace.cycles-pp._raw_spin_lock.__sched_text_start.schedule_idle.do_idle.cpu_startup_entry
      6.08 ±  6%      +1.0        7.08 ±  3%  perf-profile.calltrace.cycles-pp.__sched_text_start.schedule_idle.do_idle.cpu_startup_entry.start_secondary
      6.10 ±  6%      +1.0        7.10 ±  3%  perf-profile.calltrace.cycles-pp.schedule_idle.do_idle.cpu_startup_entry.start_secondary.secondary_startup_64
      5.92 ±  6%      +1.1        7.03 ±  3%  perf-profile.calltrace.cycles-pp.do_futex.__x64_sys_futex.do_syscall_64.entry_SYSCALL_64_after_hwframe.pthread_cond_signal@@GLIBC_2.3.2
      5.94 ±  6%      +1.1        7.05 ±  3%  perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.pthread_cond_signal@@GLIBC_2.3.2
      5.95 ±  6%      +1.1        7.07 ±  3%  perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.pthread_cond_signal@@GLIBC_2.3.2
      5.93 ±  6%      +1.1        7.04 ±  3%  perf-profile.calltrace.cycles-pp.__x64_sys_futex.do_syscall_64.entry_SYSCALL_64_after_hwframe.pthread_cond_signal@@GLIBC_2.3.2
      6.08 ±  6%      +1.1        7.20 ±  3%  perf-profile.calltrace.cycles-pp.pthread_cond_signal@@GLIBC_2.3.2
      9.26 ±  7%      +1.8       11.02 ±  3%  perf-profile.calltrace.cycles-pp.intel_idle.cpuidle_enter_state.cpuidle_enter.do_idle.cpu_startup_entry
      9.55 ±  7%      +1.8       11.38 ±  3%  perf-profile.calltrace.cycles-pp.cpuidle_enter_state.cpuidle_enter.do_idle.cpu_startup_entry.start_secondary
      9.56 ±  7%      +1.8       11.40 ±  3%  perf-profile.calltrace.cycles-pp.cpuidle_enter.do_idle.cpu_startup_entry.start_secondary.secondary_startup_64
     16.74 ±  6%      +3.0       19.71 ±  3%  perf-profile.calltrace.cycles-pp.do_idle.cpu_startup_entry.start_secondary.secondary_startup_64
     16.75 ±  6%      +3.0       19.73 ±  3%  perf-profile.calltrace.cycles-pp.cpu_startup_entry.start_secondary.secondary_startup_64
     16.75 ±  6%      +3.0       19.73 ±  3%  perf-profile.calltrace.cycles-pp.start_secondary.secondary_startup_64
     16.90 ±  6%      +3.0       19.93 ±  3%  perf-profile.calltrace.cycles-pp.secondary_startup_64
     76.06            -2.9       73.12        perf-profile.children.cycles-pp.do_syscall_64
     76.41            -2.9       73.48        perf-profile.children.cycles-pp.entry_SYSCALL_64_after_hwframe
     26.27 ±  2%      -2.7       23.56 ±  2%  perf-profile.children.cycles-pp.security_task_kill
     26.25 ±  2%      -2.7       23.54 ±  2%  perf-profile.children.cycles-pp.apparmor_task_kill
     26.45 ±  2%      -2.7       23.75 ±  2%  perf-profile.children.cycles-pp.group_send_sig_info
     13.53 ±  2%      -2.4       11.12 ±  2%  perf-profile.children.cycles-pp.aa_get_task_label
     46.12            -2.3       43.83        perf-profile.children.cycles-pp.kill_pid_info
     46.36            -2.3       44.07        perf-profile.children.cycles-pp.do_rt_sigqueueinfo
     46.72            -2.3       44.44        perf-profile.children.cycles-pp.__x64_sys_rt_sigqueueinfo
      3.02 ± 14%      -1.0        2.01 ± 14%  perf-profile.children.cycles-pp.__lll_unlock_wake
      7.39 ±  3%      -0.7        6.73 ±  2%  perf-profile.children.cycles-pp.__lll_lock_wait
      5.47 ±  3%      -0.4        5.04 ±  3%  perf-profile.children.cycles-pp.schedule
      5.59 ±  2%      -0.4        5.22 ±  2%  perf-profile.children.cycles-pp.futex_wait
      4.30 ±  5%      -0.4        3.94 ±  2%  perf-profile.children.cycles-pp.__prepare_exit_to_usermode
      4.79 ±  2%      -0.3        4.48 ±  2%  perf-profile.children.cycles-pp.futex_wait_queue_me
      1.53 ±  3%      -0.1        1.41        perf-profile.children.cycles-pp.get_signal
      0.66 ±  5%      -0.1        0.56 ±  3%  perf-profile.children.cycles-pp.switch_mm_irqs_off
      1.09 ±  3%      -0.1        0.99 ±  2%  perf-profile.children.cycles-pp.dequeue_signal
      0.62 ±  4%      -0.1        0.54 ±  4%  perf-profile.children.cycles-pp.__task_rq_lock
      0.89 ±  4%      -0.1        0.80 ±  2%  perf-profile.children.cycles-pp.__set_current_blocked
      0.53 ±  5%      -0.1        0.45 ±  3%  perf-profile.children.cycles-pp.recalc_sigpending
      0.67 ±  5%      -0.1        0.60 ±  3%  perf-profile.children.cycles-pp.__switch_to
      0.52 ±  4%      -0.1        0.45 ±  5%  perf-profile.children.cycles-pp.futex_wait_setup
      1.09 ±  2%      -0.1        1.03        perf-profile.children.cycles-pp.new_sync_read
      0.97 ±  3%      -0.1        0.91        perf-profile.children.cycles-pp.generic_file_buffered_read
      0.65 ±  4%      -0.1        0.59 ±  2%  perf-profile.children.cycles-pp._raw_spin_lock_irq
      0.20 ±  5%      -0.0        0.15 ±  3%  perf-profile.children.cycles-pp.put_task_stack
      0.51 ±  3%      -0.0        0.46 ±  2%  perf-profile.children.cycles-pp.__sigqueue_free
      0.77            -0.0        0.72        perf-profile.children.cycles-pp.__pthread_mutex_lock
      0.41 ±  4%      -0.0        0.36 ±  2%  perf-profile.children.cycles-pp.__set_task_blocked
      0.64 ±  2%      -0.0        0.60        perf-profile.children.cycles-pp.pagecache_get_page
      0.30 ±  5%      -0.0        0.26 ±  4%  perf-profile.children.cycles-pp.fpregs_mark_activate
      0.13 ±  9%      -0.0        0.10 ±  7%  perf-profile.children.cycles-pp.switch_fpu_return
      0.24 ±  4%      -0.0        0.21 ±  3%  perf-profile.children.cycles-pp.kmem_cache_free
      0.52 ±  2%      -0.0        0.49 ±  2%  perf-profile.children.cycles-pp.__lock_task_sighand
      0.46 ±  2%      -0.0        0.44 ±  2%  perf-profile.children.cycles-pp.signal_setup_done
      0.26            -0.0        0.23 ±  2%  perf-profile.children.cycles-pp.mark_wake_futex
      0.20 ±  2%      -0.0        0.18 ±  2%  perf-profile.children.cycles-pp.file_remove_privs
      0.15            -0.0        0.13 ±  3%  perf-profile.children.cycles-pp.dentry_needs_remove_privs
      0.14 ±  3%      -0.0        0.12        perf-profile.children.cycles-pp.__unwind_start
      0.07 ±  5%      -0.0        0.06 ±  7%  perf-profile.children.cycles-pp.clockevents_program_event
      0.12 ±  4%      -0.0        0.11        perf-profile.children.cycles-pp.security_inode_need_killpriv
      0.07 ±  7%      -0.0        0.05        perf-profile.children.cycles-pp.__vfs_getxattr
      0.18 ±  2%      -0.0        0.17 ±  4%  perf-profile.children.cycles-pp.__orc_find
      0.08            +0.0        0.09        perf-profile.children.cycles-pp.task_curr
      0.10 ±  4%      +0.0        0.11        perf-profile.children.cycles-pp.hrtimer_cancel
      0.15            +0.0        0.16 ±  2%  perf-profile.children.cycles-pp.check_kill_permission
      0.06 ±  7%      +0.0        0.07        perf-profile.children.cycles-pp.set_next_task_idle
      0.15 ±  4%      +0.0        0.17 ±  3%  perf-profile.children.cycles-pp.__might_sleep
      0.08 ±  5%      +0.0        0.10 ±  4%  perf-profile.children.cycles-pp.__next_timer_interrupt
      0.13 ±  3%      +0.0        0.15 ±  2%  perf-profile.children.cycles-pp._find_next_bit
      0.81            +0.0        0.82        perf-profile.children.cycles-pp.select_idle_sibling
      0.28            +0.0        0.30        perf-profile.children.cycles-pp.__copy_siginfo_from_user
      0.73            +0.0        0.75        perf-profile.children.cycles-pp.getuid
      0.41            +0.0        0.43        perf-profile.children.cycles-pp.available_idle_cpu
      0.43 ±  2%      +0.0        0.46        perf-profile.children.cycles-pp._copy_from_user
      0.93            +0.0        0.97        perf-profile.children.cycles-pp.dequeue_entity
      0.42            +0.0        0.46        perf-profile.children.cycles-pp.menu_select
      0.11 ±  6%      +0.0        0.16 ±  5%  perf-profile.children.cycles-pp.flush_smp_call_function_from_idle
      0.64 ±  2%      +0.1        0.70 ±  2%  perf-profile.children.cycles-pp.aa_may_signal
      1.79            +0.1        1.89        perf-profile.children.cycles-pp.pthread_cond_timedwait@@GLIBC_2.3.2
      1.83 ±  3%      +0.3        2.11        perf-profile.children.cycles-pp.finish_task_switch
      2.64 ±  3%      +0.3        2.98 ±  2%  perf-profile.children.cycles-pp.asm_call_on_stack
      2.03 ±  4%      +0.4        2.39 ±  2%  perf-profile.children.cycles-pp.sysvec_call_function_single
      1.99 ±  4%      +0.4        2.35 ±  2%  perf-profile.children.cycles-pp.__sysvec_call_function_single
      2.09 ±  4%      +0.4        2.46 ±  2%  perf-profile.children.cycles-pp.asm_sysvec_call_function_single
      2.04 ±  4%      +0.4        2.45 ±  2%  perf-profile.children.cycles-pp.sched_ttwu_pending
     11.57            +0.6       12.15        perf-profile.children.cycles-pp.__sched_text_start
     17.81            +0.6       18.45        perf-profile.children.cycles-pp.enqueue_task_fair
     17.83            +0.6       18.47        perf-profile.children.cycles-pp.activate_task
     17.83            +0.6       18.48        perf-profile.children.cycles-pp.ttwu_do_activate
     16.12            +0.6       16.77        perf-profile.children.cycles-pp.update_stats_enqueue_sleeper
     16.08            +0.6       16.72        perf-profile.children.cycles-pp.__account_scheduler_latency
     17.16            +0.7       17.84        perf-profile.children.cycles-pp.enqueue_entity
     25.29            +0.7       26.00        perf-profile.children.cycles-pp.try_to_wake_up
     14.49            +0.7       15.20        perf-profile.children.cycles-pp._raw_spin_lock_irqsave
     13.01 ±  4%      +0.9       13.90        perf-profile.children.cycles-pp._raw_spin_lock
      6.16 ±  6%      +1.0        7.18 ±  3%  perf-profile.children.cycles-pp.schedule_idle
      6.09 ±  6%      +1.1        7.20 ±  3%  perf-profile.children.cycles-pp.pthread_cond_signal@@GLIBC_2.3.2
     25.45 ±  3%      +1.7       27.18        perf-profile.children.cycles-pp.native_queued_spin_lock_slowpath
      9.33 ±  7%      +1.8       11.12 ±  3%  perf-profile.children.cycles-pp.intel_idle
      9.64 ±  7%      +1.9       11.50 ±  3%  perf-profile.children.cycles-pp.cpuidle_enter_state
      9.64 ±  7%      +1.9       11.50 ±  3%  perf-profile.children.cycles-pp.cpuidle_enter
     16.75 ±  6%      +3.0       19.73 ±  3%  perf-profile.children.cycles-pp.start_secondary
     16.90 ±  6%      +3.0       19.93 ±  3%  perf-profile.children.cycles-pp.secondary_startup_64
     16.90 ±  6%      +3.0       19.93 ±  3%  perf-profile.children.cycles-pp.cpu_startup_entry
     16.89 ±  6%      +3.0       19.91 ±  3%  perf-profile.children.cycles-pp.do_idle
     13.42 ±  2%      -2.4       11.04 ±  2%  perf-profile.self.cycles-pp.aa_get_task_label
      0.88 ±  4%      -0.1        0.77        perf-profile.self.cycles-pp._raw_spin_lock
      0.51 ±  5%      -0.1        0.41 ±  3%  perf-profile.self.cycles-pp.switch_mm_irqs_off
      0.43 ±  5%      -0.1        0.35 ±  4%  perf-profile.self.cycles-pp.futex_wait_queue_me
      0.44 ±  6%      -0.1        0.37 ±  3%  perf-profile.self.cycles-pp.recalc_sigpending
      0.63 ±  5%      -0.1        0.56 ±  3%  perf-profile.self.cycles-pp.__switch_to
      0.52 ±  4%      -0.1        0.45 ±  2%  perf-profile.self.cycles-pp._raw_spin_lock_irq
      0.73            -0.1        0.67        perf-profile.self.cycles-pp.__pthread_mutex_lock
      0.20 ±  5%      -0.0        0.15 ±  3%  perf-profile.self.cycles-pp.put_task_stack
      0.51 ±  3%      -0.0        0.46 ±  2%  perf-profile.self.cycles-pp.__sigqueue_free
      0.30 ±  3%      -0.0        0.26 ±  9%  perf-profile.self.cycles-pp.futex_wait_setup
      0.21 ±  3%      -0.0        0.17 ±  4%  perf-profile.self.cycles-pp.pagecache_get_page
      0.29 ±  4%      -0.0        0.25 ±  4%  perf-profile.self.cycles-pp.__lll_lock_wait
      0.29 ±  5%      -0.0        0.25 ±  4%  perf-profile.self.cycles-pp.fpregs_mark_activate
      0.35 ±  3%      -0.0        0.32        perf-profile.self.cycles-pp.generic_file_buffered_read
      0.13 ±  8%      -0.0        0.10 ±  8%  perf-profile.self.cycles-pp.switch_fpu_return
      0.18            -0.0        0.16 ±  4%  perf-profile.self.cycles-pp.simple_write_end
      0.12 ±  3%      -0.0        0.10 ±  8%  perf-profile.self.cycles-pp.ktime_get
      0.10 ± 10%      -0.0        0.08 ±  5%  perf-profile.self.cycles-pp.wake_up_q
      0.15 ±  3%      -0.0        0.13        perf-profile.self.cycles-pp.select_task_rq_fair
      0.08            -0.0        0.07 ±  7%  perf-profile.self.cycles-pp.generic_file_write_iter
      0.18 ±  2%      -0.0        0.17 ±  4%  perf-profile.self.cycles-pp.__orc_find
      0.11 ±  3%      -0.0        0.10        perf-profile.self.cycles-pp.__unqueue_futex
      0.08            -0.0        0.07        perf-profile.self.cycles-pp.arch_stack_walk
      0.08            +0.0        0.09        perf-profile.self.cycles-pp.task_curr
      0.19 ±  2%      +0.0        0.21 ±  2%  perf-profile.self.cycles-pp.prepare_signal
      0.13 ±  3%      +0.0        0.15 ±  3%  perf-profile.self.cycles-pp.__dequeue_signal
      0.13 ±  3%      +0.0        0.14 ±  3%  perf-profile.self.cycles-pp._find_next_bit
      0.09 ±  4%      +0.0        0.11        perf-profile.self.cycles-pp.menu_select
      0.41            +0.0        0.42 ±  2%  perf-profile.self.cycles-pp.available_idle_cpu
      0.63 ±  3%      +0.1        0.70 ±  2%  perf-profile.self.cycles-pp.aa_may_signal
     25.44 ±  3%      +1.7       27.17        perf-profile.self.cycles-pp.native_queued_spin_lock_slowpath
      9.33 ±  7%      +1.8       11.12 ±  3%  perf-profile.self.cycles-pp.intel_idle


                                                                                
                                  stress-ng.sigq.ops                            
                                                                                
    3e+08 +-----------------------------------------------------------------+   
          |  O O  O O    O  O O  O O  O O  O  O O  O O  O O  O O    O  O O  |   
  2.5e+08 |-+                                                     O         |   
          |..+.+..+.+..+.+.. .+..         .+..+.+..+.+..+                   |   
          |                 +    +.+..+.+.                                  |   
    2e+08 |-+                                                               |   
          |                                                                 |   
  1.5e+08 |-+                                                               |   
          |                                                                 |   
    1e+08 |-+                                                               |   
          |                                                                 |   
          |                                                                 |   
    5e+07 |-+                                                               |   
          |                                                                 |   
        0 +-----------------------------------------------------------------+   
                                                                                
                                                                                                                                                                
                             stress-ng.sigq.ops_per_sec                         
                                                                                
  1e+07 +-------------------------------------------------------------------+   
  9e+06 |-+O O  O O     O O  O  O O  O O  O  O O  O O  O  O O  O    O  O O  |   
        |                                                         O         |   
  8e+06 |..+.+..+.+..+..+.  .+..         .+..+.+..+.+..+                    |   
  7e+06 |-+               +.    +.+..+.+.                                   |   
        |                                                                   |   
  6e+06 |-+                                                                 |   
  5e+06 |-+                                                                 |   
  4e+06 |-+                                                                 |   
        |                                                                   |   
  3e+06 |-+                                                                 |   
  2e+06 |-+                                                                 |   
        |                                                                   |   
  1e+06 |-+                                                                 |   
      0 +-------------------------------------------------------------------+   
                                                                                
                                                                                
[*] bisect-good sample
[O] bisect-bad  sample



Disclaimer:
Results have been estimated based on internal Intel analysis and are provided
for informational purposes only. Any difference in system hardware or software
design or configuration may affect actual performance.


Thanks,
Rong Chen


[-- Attachment #2: config-5.8.0-rc3-00004-g96d5c61b1fff3 --]
[-- Type: text/plain, Size: 158352 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.8.0-rc3 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-9 (Debian 9.3.0-14) 9.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90300
CONFIG_LD_VERSION=234000000
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
# CONFIG_SCHED_THERMAL_PRESSURE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_LSM is not set
CONFIG_BPF_SYSCALL=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
# CONFIG_XEN_PV is not set
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=m
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features

CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=y
CONFIG_DPTF_POWER=m
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
CONFIG_PMIC_OPREGION=y
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_AMD_SEV=y
CONFIG_KVM_MMU_AUDIT=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
CONFIG_BLK_WBT=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
# CONFIG_ZSWAP_DEFAULT_ON is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_PGTABLE_MAPPING is not set
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
# end of Memory Management options

CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_SMC is not set
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
CONFIG_NETLABEL=y
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_LOG_NETDEV=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not set
CONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_LOG_BRIDGE=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_MEDIA_IB is not set
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers

CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_MTKSDIO is not set
# end of Bluetooth device drivers

# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
# CONFIG_NET_9P_RDMA is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_BW is not set
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_VMD=y
CONFIG_PCI_HYPERV_INTERFACE=m

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_PM_QOS_KUNIT_TEST is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_KUNIT_DRIVER_PE_TEST=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=m
# CONFIG_NVME_RDMA is not set
CONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_LOOP=m
# CONFIG_NVME_TARGET_RDMA is not set
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
CONFIG_PVPANIC=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC & related support
#
# CONFIG_INTEL_MIC_BUS is not set
# CONFIG_SCIF_BUS is not set
# CONFIG_VOP_BUS is not set
# end of Intel MIC & related support

# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=m
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
# end of Misc devices

CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
# CONFIG_DM_ZONED is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set

#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not set
CONFIG_IXGBE_IPSEC=y
# CONFIG_IXGBEVF is not set
CONFIG_I40E=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_MSCC_OCELOT_SWITCH is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_THUNDER is not set
# CONFIG_MDIO_XPCS is not set
CONFIG_PHYLIB=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_ADIN_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
# CONFIG_USB_VL600 is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
# CONFIG_MT7663U is not set
# CONFIG_MT7915E is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set
CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_HYPERV_NET is not set
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
CONFIG_NVM=y
# CONFIG_NVM_PBLK is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=64
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
# CONFIG_TRACE_SINK is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
CONFIG_NVRAM=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# end of Character devices

# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_INTEL=m
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
CONFIG_PINCTRL_GEMINILAKE=m
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_SUNRISEPOINT=m
# CONFIG_PINCTRL_TIGERLAKE is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
# end of USB GPIO expanders

# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
# CONFIG_SENSORS_AMD_ENERGY is not set
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
# CONFIG_INT3406_THERMAL is not set
CONFIG_PROC_THERMAL_MMIO_RAPL=y
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_PCH_THERMAL=m
# end of Intel thermal drivers

CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_MCE_KBD_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_IR_IMON_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
CONFIG_IR_ENE=m
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SIR=m
# CONFIG_RC_XBOX_DVD is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_TTM_DMA_PAGE_POOL=y
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
CONFIG_DRM_I915_GVT_KVMGT=m
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_XEN is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID=m
# end of I2C HID support

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS3 is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers

# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_EFA is not set
# CONFIG_INFINIBAND_I40IW is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_USNIC is not set
# CONFIG_INFINIBAND_BNXT_RE is not set
# CONFIG_INFINIBAND_RDMAVT is not set
CONFIG_RDMA_RXE=m
CONFIG_RDMA_SIW=m
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_INFINIBAND_ISERT is not set
# CONFIG_INFINIBAND_RTRS_CLIENT is not set
# CONFIG_INFINIBAND_RTRS_SERVER is not set
# CONFIG_INFINIBAND_OPA_VNIC is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
# CONFIG_EDAC_I10NM is not set
CONFIG_EDAC_PND2=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IDXD is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_UIO_HV_GENERIC=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=m
CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MEM=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
# end of Microsoft Hyper-V guest support

#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not set
CONFIG_XEN_DEV_EVTCHN=m
# CONFIG_XEN_BACKEND is not set
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
# CONFIG_XEN_GRANT_DMA_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
# CONFIG_XEN_PVCALLS_FRONTEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
# end of Xen driver support

# CONFIG_GREYBUS is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_HUAWEI_WMI is not set
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
CONFIG_INTEL_WMI_THUNDERBOLT=m
CONFIG_MXM_WMI=m
# CONFIG_PEAQ_WMI is not set
# CONFIG_XIAOMI_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACER_WMI=m
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
CONFIG_DCDBAS=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_SMBIOS_WMI=y
# CONFIG_DELL_SMBIOS_SMM is not set
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_RBTN=m
CONFIG_DELL_RBU=m
CONFIG_DELL_SMO8800=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_DESCRIPTOR=m
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_WMI_LED=m
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_GPD_POCKET_FAN is not set
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
# CONFIG_IBM_RTL is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SENSORS_HDAPS=m
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_INTEL_ATOMISP2_PM is not set
CONFIG_INTEL_HID_EVENT=m
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_INTEL_OAKTRAIL=m
CONFIG_INTEL_VBTN=m
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
# CONFIG_PCENGINES_APU2 is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_COMPAL_LAPTOP=m
# CONFIG_LG_LAPTOP is not set
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
# CONFIG_SYSTEM76_ACPI is not set
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_I2C_MULTI_INSTANTIATE is not set
CONFIG_MLX_PLATFORM=m
CONFIG_INTEL_IPS=m
CONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set

#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support

CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
CONFIG_INTEL_PMC_CORE=m
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
CONFIG_PMC_ATOM=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
# CONFIG_MLXREG_IO is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_EMMC is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID is not set
# end of Android

CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_DEV_DAX_PMEM_COMPAT=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y

#
# HW tracing support
#
CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
# CONFIG_ZONEFS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB_DIRECT is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_SECURITY_INFINIBAND is not set
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_APPARMOR_KUNIT_TEST is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_DES3_EDE_X86_64=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=y
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
# CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE is not set
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_DMA_VIRT_OPS=y
CONFIG_SWIOTLB=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_KASAN_STACK=1
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=m
CONFIG_RCU_PERF_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_MMIOTRACE is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set

#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
# CONFIG_KUNIT_DEBUGFS is not set
CONFIG_KUNIT_TEST=m
CONFIG_KUNIT_EXAMPLE_TEST=m
# CONFIG_KUNIT_ALL_TESTS is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_FUTEX is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAIL_FUNCTION is not set
# CONFIG_FAIL_MMC_REQUEST is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_BITFIELD is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
CONFIG_SYSCTL_KUNIT_TEST=m
CONFIG_LIST_KUNIT_TEST=m
# CONFIG_LINEAR_RANGES_TEST is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_LIVEPATCH is not set
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_HMM is not set
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 7709 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='stress-ng'
	export testcase='stress-ng'
	export category='benchmark'
	export nr_threads=96
	export timeout='30m'
	export testtime=30
	export job_origin='/lkp-src/allot/cyclic:p1:linux-devel:devel-hourly/lkp-csl-2sp6/stress-ng.yaml'
	export queue_cmdline_keys='branch
commit
queue_at_least_once'
	export queue='validate'
	export testbox='lkp-csl-2sp6'
	export tbox_group='lkp-csl-2sp6'
	export kconfig='x86_64-rhel-8.3'
	export submit_id='5f0b3eb4204f951f67e5b66e'
	export job_file='/lkp/jobs/scheduled/lkp-csl-2sp6/stress-ng-interrupt-performance-1HDD-100%-30s-ucode=0x5002f01-debian-10.4-x86_64-20200603.cgz-96d5c61b1fff364edfae607e2bf2a66ee9-20200713-8039-88njh9-2.yaml'
	export id='f3a19c9d0e56d10f290907b7e52b927bdd55e07e'
	export queuer_version='/lkp-src'
	export model='Cascade Lake'
	export nr_node=2
	export nr_cpu=96
	export memory='256G'
	export nr_hdd_partitions=1
	export hdd_partitions='/dev/disk/by-id/ata-WDC_WD10EZEX-75ZF5A0_WD-WCC1S1302268-part5'
	export ssd_partitions='/dev/disk/by-id/ata-INTEL_SSDSC2BB800G4_PHWL4204001B800RGN-part1'
	export swap_partitions=
	export rootfs_partition='/dev/disk/by-id/ata-WDC_WD10EZEX-75ZF5A0_WD-WCC1S1302268-part4'
	export brand='Intel(R) Xeon(R) Gold 6252 CPU @ 2.10GHz'
	export need_kconfig='CONFIG_BLK_DEV_SD
CONFIG_SCSI
CONFIG_BLOCK=y
CONFIG_SATA_AHCI
CONFIG_SATA_AHCI_PLATFORM
CONFIG_ATA
CONFIG_PCI=y
CONFIG_SECURITY_APPARMOR=y'
	export commit='96d5c61b1fff364edfae607e2bf2a66ee9616ff2'
	export ucode='0x5002f01'
	export need_kconfig_hw='CONFIG_I40E=y
CONFIG_SATA_AHCI'
	export enqueue_time='2020-07-13 00:47:49 +0800'
	export _id='5f0b3eb4204f951f67e5b66e'
	export _rt='/result/stress-ng/interrupt-performance-1HDD-100%-30s-ucode=0x5002f01/lkp-csl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2'
	export user='lkp'
	export compiler='gcc-9'
	export head_commit='cf86a8ab401a447152187a4266fbc62d940dad88'
	export base_commit='dcb7fd82c75ee2d6e6f9d8cc71c52519ed52e258'
	export branch='linux-review/John-Ogness/printk-replace-ringbuffer/20200709-212623'
	export rootfs='debian-10.4-x86_64-20200603.cgz'
	export result_root='/result/stress-ng/interrupt-performance-1HDD-100%-30s-ucode=0x5002f01/lkp-csl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/3'
	export scheduler_version='/lkp/lkp/.src-20200711-000512'
	export LKP_SERVER='inn'
	export arch='x86_64'
	export max_uptime=1800
	export initrd='/osimage/debian/debian-10.4-x86_64-20200603.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/jobs/scheduled/lkp-csl-2sp6/stress-ng-interrupt-performance-1HDD-100%-30s-ucode=0x5002f01-debian-10.4-x86_64-20200603.cgz-96d5c61b1fff364edfae607e2bf2a66ee9-20200713-8039-88njh9-2.yaml
ARCH=x86_64
kconfig=x86_64-rhel-8.3
branch=linux-review/John-Ogness/printk-replace-ringbuffer/20200709-212623
commit=96d5c61b1fff364edfae607e2bf2a66ee9616ff2
BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/vmlinuz-5.8.0-rc3-00004-g96d5c61b1fff3
max_uptime=1800
RESULT_ROOT=/result/stress-ng/interrupt-performance-1HDD-100%-30s-ucode=0x5002f01/lkp-csl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/3
LKP_SERVER=inn
nokaslr
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/modules.cgz'
	export bm_initrd='/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20200709.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/stress-ng_20200619.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/stress-ng-x86_64-0.11-06_20200619.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/perf_20200702.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/sar-x86_64-34c92ae-1_20200702.cgz'
	export ucode_initrd='/osimage/ucode/intel-ucode-20200610.cgz'
	export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export last_kernel='5.8.0-rc4'
	export repeat_to=4
	export schedule_notify_address=
	export queue_at_least_once=1
	export kernel='/pkg/linux/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/vmlinuz-5.8.0-rc3-00004-g96d5c61b1fff3'
	export dequeue_time='2020-07-13 01:45:38 +0800'
	export job_initrd='/lkp/jobs/scheduled/lkp-csl-2sp6/stress-ng-interrupt-performance-1HDD-100%-30s-ucode=0x5002f01-debian-10.4-x86_64-20200603.cgz-96d5c61b1fff364edfae607e2bf2a66ee9-20200713-8039-88njh9-2.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_setup nr_hdd=1 $LKP_SRC/setup/disk

	run_setup $LKP_SRC/setup/cpufreq_governor 'performance'

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
	run_monitor $LKP_SRC/monitors/wrapper iostat
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-numastat
	run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
	run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
	run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
	run_monitor $LKP_SRC/monitors/wrapper proc-stat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper slabinfo
	run_monitor $LKP_SRC/monitors/wrapper interrupts
	run_monitor $LKP_SRC/monitors/wrapper lock_stat
	run_monitor $LKP_SRC/monitors/wrapper latency_stats
	run_monitor $LKP_SRC/monitors/wrapper softirqs
	run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
	run_monitor $LKP_SRC/monitors/wrapper diskstats
	run_monitor $LKP_SRC/monitors/wrapper nfsstat
	run_monitor $LKP_SRC/monitors/wrapper cpuidle
	run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
	run_monitor $LKP_SRC/monitors/wrapper sched_debug
	run_monitor $LKP_SRC/monitors/wrapper perf-stat
	run_monitor $LKP_SRC/monitors/wrapper mpstat
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper perf-profile
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test class='interrupt' $LKP_SRC/tests/wrapper stress-ng
}

extract_stats()
{
	export stats_part_begin=
	export stats_part_end=

	$LKP_SRC/stats/wrapper stress-ng
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper boot-time
	$LKP_SRC/stats/wrapper iostat
	$LKP_SRC/stats/wrapper vmstat
	$LKP_SRC/stats/wrapper numa-numastat
	$LKP_SRC/stats/wrapper numa-vmstat
	$LKP_SRC/stats/wrapper numa-meminfo
	$LKP_SRC/stats/wrapper proc-vmstat
	$LKP_SRC/stats/wrapper meminfo
	$LKP_SRC/stats/wrapper slabinfo
	$LKP_SRC/stats/wrapper interrupts
	$LKP_SRC/stats/wrapper lock_stat
	$LKP_SRC/stats/wrapper latency_stats
	$LKP_SRC/stats/wrapper softirqs
	$LKP_SRC/stats/wrapper diskstats
	$LKP_SRC/stats/wrapper nfsstat
	$LKP_SRC/stats/wrapper cpuidle
	$LKP_SRC/stats/wrapper sched_debug
	$LKP_SRC/stats/wrapper perf-stat
	$LKP_SRC/stats/wrapper mpstat
	$LKP_SRC/stats/wrapper perf-profile

	$LKP_SRC/stats/wrapper time stress-ng.time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper last_state
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper time
}

"$@"

[-- Attachment #4: job.yaml --]
[-- Type: text/plain, Size: 5246 bytes --]

---

#! jobs/stress-ng.yaml
suite: stress-ng
testcase: stress-ng
category: benchmark
nr_threads: 100%
timeout: 30m
disk: 1HDD
testtime: 30s
stress-ng:
  class: interrupt
job_origin: "/lkp-src/allot/cyclic:p1:linux-devel:devel-hourly/lkp-csl-2sp6/stress-ng.yaml"

#! queue options
queue_cmdline_keys:
- branch
- commit
- queue_at_least_once
queue: bisect
testbox: lkp-csl-2sp6
tbox_group: lkp-csl-2sp6
kconfig: x86_64-rhel-8.3
submit_id: 5f0b189c204f951bb14d0af8
job_file: "/lkp/jobs/scheduled/lkp-csl-2sp6/stress-ng-interrupt-performance-1HDD-100%-30s-ucode=0x5002f01-debian-10.4-x86_64-20200603.cgz-96d5c61b1fff364edfae607e2bf2a66ee9-20200712-7089-17r5lh8-1.yaml"
id: 04a4f1bd28f3e02ebb4d8a057c25980574e63a8f
queuer_version: "/lkp-src"

#! hosts/lkp-csl-2sp6
model: Cascade Lake
nr_node: 2
nr_cpu: 96
memory: 256G
nr_hdd_partitions: 1
hdd_partitions: "/dev/disk/by-id/ata-WDC_WD10EZEX-75ZF5A0_WD-WCC1S1302268-part5"
ssd_partitions: "/dev/disk/by-id/ata-INTEL_SSDSC2BB800G4_PHWL4204001B800RGN-part1"
swap_partitions: 
rootfs_partition: "/dev/disk/by-id/ata-WDC_WD10EZEX-75ZF5A0_WD-WCC1S1302268-part4"
brand: Intel(R) Xeon(R) Gold 6252 CPU @ 2.10GHz

#! include/category/benchmark
kmsg: 
boot-time: 
iostat: 
heartbeat: 
vmstat: 
numa-numastat: 
numa-vmstat: 
numa-meminfo: 
proc-vmstat: 
proc-stat: 
meminfo: 
slabinfo: 
interrupts: 
lock_stat: 
latency_stats: 
softirqs: 
bdi_dev_mapping: 
diskstats: 
nfsstat: 
cpuidle: 
cpufreq-stats: 
sched_debug: 
perf-stat: 
mpstat: 
perf-profile: 

#! include/category/ALL
cpufreq_governor: performance

#! include/disk/nr_hdd
need_kconfig:
- CONFIG_BLK_DEV_SD
- CONFIG_SCSI
- CONFIG_BLOCK=y
- CONFIG_SATA_AHCI
- CONFIG_SATA_AHCI_PLATFORM
- CONFIG_ATA
- CONFIG_PCI=y
- CONFIG_SECURITY_APPARMOR=y

#! include/stress-ng

#! include/queue/cyclic
commit: 96d5c61b1fff364edfae607e2bf2a66ee9616ff2

#! include/testbox/lkp-csl-2sp6
ucode: '0x5002f01'
need_kconfig_hw:
- CONFIG_I40E=y
- CONFIG_SATA_AHCI
enqueue_time: 2020-07-12 22:05:16.338919997 +08:00
_id: 5f0b189f204f951bb14d0af9
_rt: "/result/stress-ng/interrupt-performance-1HDD-100%-30s-ucode=0x5002f01/lkp-csl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2"

#! schedule options
user: lkp
compiler: gcc-9
head_commit: cf86a8ab401a447152187a4266fbc62d940dad88
base_commit: dcb7fd82c75ee2d6e6f9d8cc71c52519ed52e258
branch: linux-devel/devel-hourly-2020071017
rootfs: debian-10.4-x86_64-20200603.cgz
result_root: "/result/stress-ng/interrupt-performance-1HDD-100%-30s-ucode=0x5002f01/lkp-csl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/0"
scheduler_version: "/lkp/lkp/.src-20200711-000512"
LKP_SERVER: inn
arch: x86_64
max_uptime: 1800
initrd: "/osimage/debian/debian-10.4-x86_64-20200603.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/jobs/scheduled/lkp-csl-2sp6/stress-ng-interrupt-performance-1HDD-100%-30s-ucode=0x5002f01-debian-10.4-x86_64-20200603.cgz-96d5c61b1fff364edfae607e2bf2a66ee9-20200712-7089-17r5lh8-1.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-8.3
- branch=linux-devel/devel-hourly-2020071017
- commit=96d5c61b1fff364edfae607e2bf2a66ee9616ff2
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/vmlinuz-5.8.0-rc3-00004-g96d5c61b1fff3
- max_uptime=1800
- RESULT_ROOT=/result/stress-ng/interrupt-performance-1HDD-100%-30s-ucode=0x5002f01/lkp-csl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/0
- LKP_SERVER=inn
- nokaslr
- selinux=0
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- console=tty0
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- vga=normal
- rw
modules_initrd: "/pkg/linux/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/modules.cgz"
bm_initrd: "/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20200709.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/stress-ng_20200619.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/stress-ng-x86_64-0.11-06_20200619.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/perf_20200702.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/sar-x86_64-34c92ae-1_20200702.cgz"
ucode_initrd: "/osimage/ucode/intel-ucode-20200610.cgz"
lkp_initrd: "/osimage/user/lkp/lkp-x86_64.cgz"
site: inn

#! /lkp/lkp/.src-20200711-000512/include/site/inn
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer: 
watchdog: 

#! runtime status
last_kernel: 5.8.0-rc3-00003-g9f7243f4d60e91
repeat_to: 2
schedule_notify_address: 

#! user overrides
queue_at_least_once: 0
kernel: "/pkg/linux/x86_64-rhel-8.3/gcc-9/96d5c61b1fff364edfae607e2bf2a66ee9616ff2/vmlinuz-5.8.0-rc3-00004-g96d5c61b1fff3"
dequeue_time: 2020-07-12 22:06:18.122665445 +08:00
job_state: failed
loadavg: 5872.79 3815.33 1511.39 1/724 30634
start_time: '1594562530'
end_time: '1594563073'
version: "/lkp/lkp/.src-20200711-000546:aecf13d8:c71432e12"

[-- Attachment #5: reproduce --]
[-- Type: text/plain, Size: 463 bytes --]


for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
do
	online_file="$cpu_dir"/online
	[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue

	file="$cpu_dir"/cpufreq/scaling_governor
	[ -f "$file" ] && echo "performance" > "$file"
done

 "mkdir" "-p" "/mnt/stress-ng"
 "mount" "/dev/sdb5" "/mnt/stress-ng"
 "stress-ng" "--timeout" "30" "--times" "--verify" "--metrics-brief" "--sequential" "96" "--class" "interrupt" "--exclude" "spawn,exec,swap"

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Marco Elver]

On Thu, Jul 09, 2020 at 03:29PM +0206, John Ogness wrote:
> Replace the existing ringbuffer usage and implementation with
> lockless ringbuffer usage. Even though the new ringbuffer does not
> require locking, all existing locking is left in place. Therefore,
> this change is purely replacing the underlining ringbuffer.
> 
> Changes that exist due to the ringbuffer replacement:
> 
> - The VMCOREINFO has been updated for the new structures.
> 
> - Dictionary data is now stored in a separate data buffer from the
>   human-readable messages. The dictionary data buffer is set to the
>   same size as the message buffer. Therefore, the total required
>   memory for both dictionary and message data is
>   2 * (2 ^ CONFIG_LOG_BUF_SHIFT) for the initial static buffers and
>   2 * log_buf_len (the kernel parameter) for the dynamic buffers.
> 
> - Record meta-data is now stored in a separate array of descriptors.
>   This is an additional 72 * (2 ^ (CONFIG_LOG_BUF_SHIFT - 5)) bytes
>   for the static array and 72 * (log_buf_len >> 5) bytes for the
>   dynamic array.
> 
> Signed-off-by: John Ogness <john.ogness@linutronix.de>
> Reviewed-by: Petr Mladek <pmladek@suse.com>

It seems this causes a regression observed at least with newline-only
printks. I noticed this during -next testing because various debugging
tools (K*SAN, lockdep, etc.) use e.g. pr_{err,warn,info}("\n") to format
reports.

Without wanting to wait for a report from one of these debugging tools,
a simple reproducer is below. Without this patch, the expected newline
is printed.

Thanks,
-- Marco

------ >8 ------

--- a/init/main.c
+++ b/init/main.c
@@ -1039,6 +1039,10 @@ asmlinkage __visible void __init start_kernel(void)
 	sfi_init_late();
 	kcsan_init();
 
+	pr_info("EXPECT BLANK LINE --vv\n");
+	pr_info("\n");
+	pr_info("EXPECT BLANK LINE --^^\n");
+
 	/* Do the rest non-__init'ed, we're now alive */
 	arch_call_rest_init();
 

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Sergey Senozhatsky]

Hi Marco,

On (20/07/18 14:10), Marco Elver wrote:
> 
> It seems this causes a regression observed at least with newline-only
> printks. I noticed this during -next testing because various debugging
> tools (K*SAN, lockdep, etc.) use e.g. pr_{err,warn,info}("\n") to format
> reports.
> 
> Without wanting to wait for a report from one of these debugging tools,
> a simple reproducer is below. Without this patch, the expected newline
> is printed.

Empty/blank lines carry no valuable payload, could you please explain
why do you consider this to be a regression?

	-ss

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Marco Elver]

On Sun, Jul 19, 2020 at 12:43PM +0900, Sergey Senozhatsky wrote:
> Hi Marco,
> 
> On (20/07/18 14:10), Marco Elver wrote:
> > 
> > It seems this causes a regression observed at least with newline-only
> > printks. I noticed this during -next testing because various debugging
> > tools (K*SAN, lockdep, etc.) use e.g. pr_{err,warn,info}("\n") to format
> > reports.
> > 
> > Without wanting to wait for a report from one of these debugging tools,
> > a simple reproducer is below. Without this patch, the expected newline
> > is printed.
> 
> Empty/blank lines carry no valuable payload, could you please explain
> why do you consider this to be a regression?

Empty/blank lines are visually valuable.

Did I miss a discussion somewhere that this change is acceptable?
Unfortunately, I can't find it mentioned in the commit message, and
therefore assumed it's a regression.

As I said, a number of debugging tools use them to format reports to be
more readable (visually separate title and report body, and separate
parts of the report). Also, such reports are often parsed by CI systems,
and by changing the reports, these CI systems may break. But those are
just the usecases I'm acutely aware of -- please see a full list of
newline-print users below.

Breaking the observable behaviour of a widely used interface such as
printk doesn't seem right. Where the newline-print is inappropriate,
wouldn't removing that newline-print be more appropriate (instead of
forcing this behaviour on everyone)?

Thanks,
-- Marco

------ >8 ------

$> git grep -En '\<(printk|pr_err|pr_warn|pr_info)\>\("\\n"\)'
arch/alpha/kernel/core_wildfire.c:650:	printk("\n");
arch/alpha/kernel/core_wildfire.c:658:	printk("\n");
arch/alpha/kernel/traps.c:120:	printk("\n");
arch/arm/mach-footbridge/dc21285.c:168:		printk("\n");
arch/arm/mach-footbridge/dc21285.c:185:	printk("\n");
arch/arm/mach-footbridge/dc21285.c:214:	printk("\n");
arch/arm/mach-footbridge/dc21285.c:229:	printk("\n");
arch/arm/plat-orion/mpp.c:44:	printk("\n");
arch/arm/plat-orion/mpp.c:81:	printk("\n");
arch/arm/probes/kprobes/test-core.c:576:	pr_info("\n");
arch/c6x/kernel/traps.c:30:	pr_err("\n");
arch/h8300/kernel/process.c:101:		printk("\n");
arch/h8300/kernel/traps.c:84:	pr_info("\n");
arch/h8300/kernel/traps.c:93:	pr_info("\n");
arch/ia64/kernel/acpi.c:514:		printk("\n");
arch/ia64/kernel/process.c:105:	printk("\n");
arch/ia64/kernel/sal.c:173:	printk("\n");
arch/ia64/kernel/time.c:306:		printk("\n");
arch/ia64/kernel/unaligned.c:48:	printk("\n");
arch/m68k/mm/kmap.c:283:	printk("\n");
arch/m68k/mm/motorola.c:383:	printk("\n");
arch/microblaze/pci/xilinx_pci.c:109:			pr_info("\n");
arch/mips/jazz/jazzdma.c:170:		printk("\n");
arch/mips/jazz/jazzdma.c:276:		printk("\n");
arch/mips/jazz/jazzdma.c:345:	printk("\n");
arch/mips/jazz/jazzdma.c:351:	printk("\n");
arch/mips/kernel/sysrq.c:31:	pr_info("\n");
arch/mips/kernel/sysrq.c:33:	pr_info("\n");
arch/mips/kernel/traps.c:378:	printk("\n");
arch/mips/kernel/traps.c:1588:		pr_info("\n");
arch/mips/kvm/tlb.c:81:	pr_info("\n");
arch/mips/lib/dump_tlb.c:187:	printk("\n");
arch/mips/lib/r3k_dump_tlb.c:67:	printk("\n");
arch/mips/math-emu/ieee754d.c:58:	printk("\n");
arch/mips/math-emu/ieee754d.c:97:	printk("\n");
arch/mips/mm/cerr-sb1.c:74:	printk("\n");
arch/mips/mm/cerr-sb1.c:85:	printk("\n");
arch/mips/mm/cerr-sb1.c:126:	printk("\n");
arch/mips/mm/cerr-sb1.c:416:			printk("\n");
arch/mips/mm/cerr-sb1.c:561:			printk("\n");
arch/mips/netlogic/xlr/fmn-config.c:64:	pr_info("\n");
arch/mips/netlogic/xlr/fmn-config.c:78:	pr_info("\n");
arch/mips/sni/setup.c:106:			printk("\n");
arch/openrisc/kernel/traps.c:120:	printk("\n");
arch/openrisc/kernel/traps.c:168:	printk("\n");
arch/openrisc/kernel/traps.c:183:	printk("\n");
arch/openrisc/kernel/traps.c:196:	printk("\n");
arch/parisc/kernel/drivers.c:1007:	pr_info("\n");
arch/parisc/kernel/pci-dma.c:70:	printk("\n");
arch/parisc/kernel/traps.c:452:	printk("\n");
arch/parisc/mm/fault.c:245:	pr_warn("\n");
arch/powerpc/kernel/traps.c:213:	printk("\n");
arch/powerpc/math-emu/fabs.c:15:	printk("\n");
arch/powerpc/math-emu/fctiw.c:24:	printk("\n");
arch/powerpc/math-emu/fctiwz.c:31:	printk("\n");
arch/powerpc/math-emu/fmr.c:15:	printk("\n");
arch/powerpc/math-emu/fnabs.c:15:	printk("\n");
arch/powerpc/math-emu/fneg.c:15:	printk("\n");
arch/powerpc/math-emu/lfd.c:17:	printk("\n");
arch/powerpc/math-emu/stfd.c:13:	printk("\n");
arch/powerpc/mm/book3s64/slb.c:271:			pr_err("\n");
arch/powerpc/mm/nohash/44x.c:194:			printk("\n");
arch/powerpc/platforms/52xx/efika.c:111:	printk("\n");
arch/powerpc/platforms/chrp/pci.c:257:		printk("\n");
arch/powerpc/platforms/embedded6xx/ls_uart.c:53:	printk("\n");
arch/powerpc/platforms/powermac/pfunc_core.c:88:	printk("\n");
arch/powerpc/platforms/ps3/setup.c:100:	printk("\n");
arch/powerpc/platforms/ps3/setup.c:103:	printk("\n");
arch/sh/drivers/pci/common.c:137:		printk("\n");
arch/sh/drivers/pci/common.c:146:		printk("\n");
arch/sh/drivers/pci/pci-sh7780.c:151:	printk("\n");
arch/sh/kernel/disassemble.c:567:		printk("\n");
arch/sh/kernel/disassemble.c:570:	printk("\n");
arch/sh/kernel/process_32.c:33:	printk("\n");
arch/sh/kernel/process_32.c:44:	printk("\n");
arch/sparc/kernel/perf_event.c:1602:	pr_info("\n");
arch/sparc/kernel/setup_32.c:383:	printk("\n");
arch/sparc/kernel/traps_32.c:44:	printk("\n");
arch/sparc/kernel/traps_64.c:2435:	printk("\n");
arch/sparc/kernel/traps_64.c:2452:	printk("\n");
arch/um/drivers/daemon_kern.c:39:	printk("\n");
arch/um/drivers/slirp_kern.c:44:	printk("\n");
arch/um/drivers/vde_kern.c:36:	printk("\n");
arch/um/os-Linux/skas/mem.c:101:			printk("\n");
arch/x86/events/core.c:1428:		pr_info("\n");
arch/x86/kernel/apm_32.c:2305:		printk("\n");
arch/x86/kernel/cpu/mtrr/cleanup.c:768:				pr_info("\n");
arch/x86/um/sysrq_32.c:17:        printk("\n");
arch/x86/um/sysrq_64.c:18:	printk("\n");
block/genhd.c:1115:				printk("\n");
drivers/ata/pata_marvell.c:50:	printk("\n");
drivers/ata/sata_mv.c:1258:		printk("\n");
drivers/ata/sata_mv.c:1275:		printk("\n");
drivers/atm/eni.c:1723:		printk("\n");
drivers/atm/eni.c:1734:			printk("\n");
drivers/atm/idt77252.c:543:	printk("\n");
drivers/atm/idt77252.c:1281:			printk("\n");
drivers/atm/idt77252.c:3494:	printk("\n");
drivers/atm/iphase.c:1347:          printk("\n");)
drivers/atm/iphase.c:2413:        printk("\n");  
drivers/atm/iphase.c:3001:        printk("\n");)
drivers/block/floppy.c:1830:	pr_info("\n");
drivers/block/floppy.c:1867:	pr_info("\n");
drivers/block/paride/bpck.c:340:	    printk("\n");
drivers/block/paride/pcd.c:590:		printk("\n");
drivers/block/paride/pd.c:294:	printk("\n");
drivers/block/paride/pf.c:585:		printk("\n");
drivers/block/paride/pg.c:349:		printk("\n");
drivers/block/paride/pg.c:415:		printk("\n");
drivers/block/paride/pt.c:477:		printk("\n");
drivers/block/umem.c:200:		printk("\n");
drivers/block/umem.c:226:	printk("\n");
drivers/block/xsysace.c:384:		printk("\n");
drivers/bluetooth/dtl1_cs.c:188:	printk("\n");
drivers/char/applicom.c:333:				printk("\n");
drivers/char/applicom.c:420:		printk("\n");
drivers/char/applicom.c:533:		printk("\n");
drivers/char/applicom.c:820:				printk("\n");
drivers/char/dtlk.c:457:				printk("\n");
drivers/char/dtlk.c:460:				printk("\n");
drivers/char/dtlk.c:483:				printk("\n");
drivers/char/dtlk.c:486:				printk("\n");
drivers/char/dtlk.c:530:	   printk("\n");
drivers/char/pcmcia/synclink_cs.c:3825:		printk("\n");
drivers/crypto/hifn_795x.c:1833:			pr_info("\n");
drivers/gpu/drm/i915/gvt/cmd_parser.c:698:	pr_err("\n");
drivers/i2c/busses/i2c-viapro.c:116:		printk("\n");
drivers/i2c/busses/scx200_acb.c:358:	printk("\n");
drivers/ide/cmd640.c:376:	printk("\n");
drivers/infiniband/hw/mlx4/qp.c:3245:		pr_err("\n");
drivers/infiniband/hw/mthca/mthca_cmd.c:1802:					printk("\n");
drivers/infiniband/hw/mthca/mthca_cmd.c:1819:					printk("\n");
drivers/infiniband/hw/mthca/mthca_eq.c:614:				printk("\n");
drivers/infiniband/hw/mthca/mthca_mr.c:487:				printk("\n");
drivers/input/keyboard/lkkbd.c:380:		printk("\n");
drivers/input/mouse/appletouch.c:225:		printk("\n");						\
drivers/iommu/iommu-debugfs.c:35:		pr_warn("\n");
drivers/isdn/hardware/mISDN/hfcmulti.c:2338:				printk("\n");
drivers/isdn/hardware/mISDN/hfcsusb.c:900:					printk("\n");
drivers/isdn/hardware/mISDN/hfcsusb.c:924:					printk("\n");
drivers/isdn/hardware/mISDN/hfcsusb.c:1025:				printk("\n");
drivers/isdn/hardware/mISDN/hfcsusb.c:1119:		printk("\n");
drivers/isdn/hardware/mISDN/hfcsusb.c:1331:					printk("\n");
drivers/isdn/mISDN/dsp_cmx.c:174:		printk("\n");
drivers/macintosh/adb-iop.c:120:	printk("\n");
drivers/macintosh/adb-iop.c:181:	printk("\n");
drivers/macintosh/adb.c:120:        printk("\n");
drivers/macintosh/therm_windtunnel.c:395:	printk("\n");
drivers/media/dvb-frontends/mt312.c:78:		printk("\n");
drivers/media/dvb-frontends/mt312.c:102:		printk("\n");
drivers/media/pci/bt8xx/dst.c:550:	pr_err("\n");
drivers/media/tuners/mt2060.c:25:#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2060: " args); printk("\n"); }} while (0)
drivers/media/tuners/mt2266.c:45:#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2266: " args); printk("\n"); }} while (0)
drivers/message/fusion/mptdebug.h:158:	printk("\n");
drivers/message/fusion/mptdebug.h:175:			printk("\n");
drivers/message/fusion/mptdebug.h:178:	printk("\n");
drivers/message/fusion/mptdebug.h:192:	printk("\n");
drivers/message/fusion/mptdebug.h:205:			printk("\n");
drivers/message/fusion/mptdebug.h:208:	printk("\n");
drivers/message/fusion/mptdebug.h:222:	printk("\n");
drivers/message/fusion/mptdebug.h:236:	printk("\n");
drivers/message/fusion/mptdebug.h:250:			printk("\n");
drivers/message/fusion/mptdebug.h:253:	printk("\n");
drivers/message/fusion/mptdebug.h:267:			printk("\n");
drivers/message/fusion/mptdebug.h:270:	printk("\n");
drivers/message/fusion/mptsas.c:953:	dsaswideprintk(ioc, printk("\n"));
drivers/mfd/wm8350-core.c:42:	printk("\n"); \
drivers/mmc/host/wbsd.c:1718:	printk("\n");
drivers/mtd/nand/raw/diskonchip.c:317:		printk("\n");
drivers/mtd/nand/raw/diskonchip.c:467:		printk("\n");
drivers/mtd/nand/raw/diskonchip.c:500:		printk("\n");
drivers/mtd/tests/nandbiterrs.c:332:	printk("\n");
drivers/mtd/tests/subpagetest.c:113:		printk("\n");
drivers/mtd/tests/torturetest.c:442:		printk("\n");
drivers/net/appletalk/ltpc.c:322:		printk("\n");
drivers/net/appletalk/ltpc.c:583:					printk("\n");
drivers/net/appletalk/ltpc.c:911:		printk("\n");
drivers/net/appletalk/ltpc.c:921:		printk("\n");
drivers/net/ethernet/amd/7990.c:563:				printk("\n");
drivers/net/ethernet/amd/ni65.c:909:				printk("\n");
drivers/net/ethernet/amd/ni65.c:1144:	printk("\n");
drivers/net/ethernet/amd/pcnet32.c:2469:		printk("\n");
drivers/net/ethernet/apple/bmac.c:1351:	printk("\n");
drivers/net/ethernet/apple/mace.c:616:	printk("\n");
drivers/net/ethernet/dec/tulip/de4x5.c:5012:	    printk("\n");
drivers/net/ethernet/dec/tulip/de4x5.c:5349:	  printk("\n");
drivers/net/ethernet/dlink/sundance.c:1474:					printk("\n");
drivers/net/ethernet/dnet.c:500:	printk("\n");
drivers/net/ethernet/i825xx/sun3_82586.c:1185:			printk("\n");
drivers/net/ethernet/i825xx/sun3_82586.c:1187:	printk("\n");
drivers/net/ethernet/packetengines/hamachi.c:1691:					printk("\n");
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:812:			pr_info("\n");
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:815:	pr_info("\n");
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:820:			pr_info("\n");
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:823:	pr_info("\n");
drivers/net/ethernet/realtek/atp.c:291:		printk("\n");
drivers/net/ethernet/seeq/ether3.c:255:				printk("\n");
drivers/net/ethernet/stmicro/stmmac/enh_desc.c:437:	pr_info("\n");
drivers/net/ethernet/stmicro/stmmac/norm_desc.c:289:	pr_info("\n");
drivers/net/ethernet/sun/sungem.c:2792:		printk("\n");
drivers/net/ethernet/ti/cpmac.c:220:				printk("\n");
drivers/net/ethernet/ti/cpmac.c:225:	printk("\n");
drivers/net/ethernet/ti/cpmac.c:235:	printk("\n");
drivers/net/ethernet/ti/cpmac.c:257:				printk("\n");
drivers/net/ethernet/ti/cpmac.c:262:	printk("\n");
drivers/net/ethernet/toshiba/tc35815.c:905:		printk("\n");
drivers/net/ethernet/toshiba/tc35815.c:1065:	printk("\n");
drivers/net/ethernet/toshiba/tc35815.c:1086:	printk("\n");
drivers/net/ethernet/toshiba/tc35815.c:1105:	printk("\n");
drivers/net/ethernet/toshiba/tc35815.c:1355:	printk("\n");
drivers/net/ethernet/via/via-velocity.h:1328:	printk("\n");\
drivers/net/ethernet/xscale/ixp4xx_eth.c:594:	printk("\n");
drivers/net/hamradio/scc.c:1476:	printk("\n");
drivers/net/hippi/rrunner.c:1286:				printk("\n");
drivers/net/hippi/rrunner.c:1289:		printk("\n");
drivers/net/hippi/rrunner.c:1303:				printk("\n");
drivers/net/hippi/rrunner.c:1306:		printk("\n");
drivers/net/sb1000.c:725:			printk("\n");
drivers/net/wan/ixp4xx_hss.c:566:	printk("\n");
drivers/net/wireless/broadcom/b43/main.c:1139:		printk("\n");
drivers/net/wireless/broadcom/b43/main.c:1934:				printk("\n");
drivers/net/wireless/broadcom/b43/main.c:1938:		printk("\n");
drivers/net/wireless/intersil/hostap/hostap_80211_rx.c:45:		printk("\n");
drivers/net/wireless/intersil/hostap/hostap_80211_rx.c:57:	printk("\n");
drivers/net/wireless/intersil/hostap/hostap_80211_tx.c:42:		printk("\n");
drivers/net/wireless/intersil/hostap/hostap_80211_tx.c:54:	printk("\n");
drivers/net/wireless/intersil/hostap/hostap_hw.c:2152:	printk("\n");
drivers/net/wireless/intersil/orinoco/orinoco_plx.c:151:	printk("\n");
drivers/net/wireless/intersil/prism54/islpci_mgt.c:46:	printk("\n");
drivers/net/wireless/marvell/libertas/defs.h:97:					printk("\n");
drivers/net/wireless/marvell/libertas/defs.h:103:		printk("\n");
drivers/net/wireless/ray_cs.c:648:		printk("\n");
drivers/net/wireless/ray_cs.c:2347:		printk("\n");
drivers/net/wireless/st/cw1200/cw1200_spi.c:105:	printk("\n");
drivers/net/wireless/st/cw1200/cw1200_spi.c:170:	printk("\n");
drivers/parisc/gsc.c:225:	printk("\n");
drivers/parisc/iosapic.c:633:	printk("\n");
drivers/parisc/iosapic.c:645:printk("\n");
drivers/parisc/lba_pci.c:1379:	printk("\n");
drivers/pcmcia/i82365.c:680:    if (base == 0) printk("\n");
drivers/scsi/53c700.c:832:		printk("\n");
drivers/scsi/53c700.c:863:	printk("\n");
drivers/scsi/53c700.c:917:		printk("\n");
drivers/scsi/NCR5380.c:2098:		printk("\n");
drivers/scsi/advansys.c:2489:		printk("\n");
drivers/scsi/aha152x.c:1739:					printk("\n");
drivers/scsi/aha1740.c:344:	printk("\n");
drivers/scsi/aha1740.c:439:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:2731:		printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:3953:					printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9611:		printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9722:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9766:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9776:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9786:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9797:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9806:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9833:			printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9843:			printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9864:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9876:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9880:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c:9934:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c:793:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c:1821:			printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c:1942:						printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c:1945:				printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c:2165:	printk("\n");
drivers/scsi/aic7xxx/aic79xx_pci.c:614:		printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7067:		printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7165:		printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7184:	printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7194:	printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7204:	printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7214:	printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7224:	printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7236:	printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7256:	printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7265:	printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c:7279:		printk("\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c:1745:			printk("\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c:1849:						printk("\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c:1852:				printk("\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c:2062:	printk("\n");
drivers/scsi/arm/acornscsi.c:248:	printk("\n");
drivers/scsi/arm/acornscsi.c:538:	printk("\n");
drivers/scsi/arm/acornscsi.c:1395:    printk("\n");
drivers/scsi/arm/acornscsi.c:1476:    printk("\n");
drivers/scsi/arm/acornscsi.c:1870:    printk("\n");
drivers/scsi/arm/fas216.c:330:	printk("\n");
drivers/scsi/arm/fas216.c:344:	printk("\n");
drivers/scsi/arm/fas216.c:388:			printk("\n");
drivers/scsi/arm/fas216.c:391:		printk("\n");
drivers/scsi/arm/fas216.c:399:	printk("\n");
drivers/scsi/arm/fas216.c:1043:	printk("\n");
drivers/scsi/arm/fas216.c:1147:	printk("\n");
drivers/scsi/arm/fas216.c:1264:		printk("\n");
drivers/scsi/arm/fas216.c:1702:		printk("\n");
drivers/scsi/arm/fas216.c:2021://{ int i; for (i = 0; i < 32; i++) printk("%02x ", SCpnt->sense_buffer[i]); printk("\n"); }
drivers/scsi/atp870u.c:337:			printk("\n");
drivers/scsi/atp870u.c:746:	printk("\n");
drivers/scsi/dc395x.c:2197:				printk("\n");
drivers/scsi/dc395x.c:2393:				printk("\n");
drivers/scsi/dc395x.c:3447:	printk("\n");
drivers/scsi/dc395x.c:4194:		printk("\n");
drivers/scsi/dpt_i2o.c:3160:	 printk("\n");
drivers/scsi/gdth.c:2720:        printk("\n");
drivers/scsi/gdth.c:3107:            printk("\n");
drivers/scsi/lpfc/lpfc_debugfs.c:5827:		pr_err("\n");
drivers/scsi/lpfc/lpfc_debugfs.c:5855:		pr_err("\n");
drivers/scsi/mesh.c:258:		printk("\n");
drivers/scsi/mesh.c:283:		printk("\n");
drivers/scsi/mesh.c:720:			printk("\n");
drivers/scsi/mesh.c:1170:		printk("\n");
drivers/scsi/mesh.c:1249:	printk("\n");
drivers/scsi/mpt3sas/mpt3sas_debug.h:165:	pr_info("\n");
drivers/scsi/mpt3sas/mpt3sas_debug.h:184:	pr_info("\n");
drivers/scsi/mpt3sas/mpt3sas_debug.h:203:	pr_info("\n");
drivers/scsi/ncr53c8xx.c:3672:	printk("\n");
drivers/scsi/nsp32_debug.c:137:	printk("\n");
drivers/scsi/nsp32_debug.c:225:	printk("\n");
drivers/scsi/nsp32_debug.c:254:	printk("\n");
drivers/scsi/nsp32_debug.c:259:		printk("\n");
drivers/scsi/pcmcia/nsp_debug.c:138:	printk("\n");
drivers/scsi/pcmcia/nsp_debug.c:212:	printk("\n");
drivers/scsi/pcmcia/sym53c500_cs.c:556:	VDEB(printk("\n"));
drivers/scsi/qla1280.c:3928:	printk("\n");
drivers/scsi/qla1280.c:3950:			printk("\n");
drivers/scsi/qla1280.c:3955:		printk("\n");
drivers/scsi/qla4xxx/ql4_83xx.c:1423:	DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c:1434:	DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c:1445:	DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c:1456:	DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c:1474:	DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c:1492:	DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_dbg.c:25:			printk("\n");
drivers/scsi/wd33c93.c:2048:	printk("\n");
drivers/staging/rtl8192u/ieee80211/ieee80211.h:464:					printk("\n");                          \
drivers/staging/rtl8192u/ieee80211/ieee80211.h:466:			printk("\n");                                          \
drivers/staging/rtl8192u/r8192U.h:120:					printk("\n");			\
drivers/staging/rtl8192u/r8192U.h:122:			printk("\n");					\
drivers/staging/rtl8723bs/core/rtw_mlme.c:2387:			printk("\n");
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:2189:		printk("\n");
drivers/staging/rtl8723bs/hal/hal_com.c:1651:			printk("\n");
drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c:1686:					printk("\n");
drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c:1708:					printk("\n");
drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c:1728:					printk("\n");
drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c:1747:					printk("\n");
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:901:			printk("\n");
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:904:	printk("\n");
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:972:			printk("\n");
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:975:	printk("\n");
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:251:				printk("\n");
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:579:						printk("\n");*/
drivers/staging/wlan-ng/p80211netdev.c:989:		/* printk("\n"); */
drivers/staging/wlan-ng/p80211netdev.c:1031:		/* printk("\n"); */
drivers/tty/hvc/hvsi.c:203:	printk("\n");
drivers/tty/n_r3964.c:273:	printk("\n");
drivers/tty/serial/zs.c:203:		printk("\n");
drivers/tty/synclink.c:7437:		printk("\n");
drivers/tty/synclink_gt.c:568:		printk("\n");
drivers/tty/synclinkmp.c:5446:		printk("\n");
drivers/usb/atm/speedtch.c:625:		printk("\n");
drivers/usb/host/isp116x.h:572:		printk("\n");
drivers/usb/host/isp116x.h:584:		printk("\n");
drivers/usb/host/isp1362.h:903:				printk("\n");
drivers/usb/host/isp1362.h:913:			printk("\n");
drivers/usb/storage/sddr09.c:1478:		printk("\n");
drivers/video/fbdev/intelfb/intelfbhw.c:827:	printk("\n");
drivers/video/fbdev/intelfb/intelfbhw.c:834:	printk("\n");
drivers/video/fbdev/vesafb.c:343:			printk("\n");
drivers/w1/masters/ds2490.c:225:	pr_info("\n");
drivers/w1/masters/ds2490.c:347:		printk("\n");
drivers/w1/masters/ds2490.c:436:			printk("\n");
drivers/xen/xenbus/xenbus_probe_frontend.c:328:		printk("\n");
fs/btrfs/check-integrity.c:1689:		pr_info("\n");
fs/btrfs/check-integrity.c:2486:		printk("\n");
fs/cachefiles/internal.h:322:		pr_err("\n");						\
fs/cachefiles/internal.h:331:		pr_err("\n");						\
fs/cachefiles/internal.h:342:		pr_err("\n");						\
fs/cachefiles/internal.h:351:		pr_err("\n");						\
fs/cachefiles/namei.c:121:		pr_err("\n");
fs/cachefiles/namei.c:187:		pr_err("\n");
fs/cachefiles/namei.c:233:			pr_err("\n");
fs/dlm/dlm_internal.h:99:    printk("\n"); \
fs/ext2/xattr.c:79:		printk("\n"); \
fs/ext2/xattr.c:85:		printk("\n"); \
fs/fscache/internal.h:446:		pr_err("\n");					\
fs/fscache/internal.h:455:		pr_err("\n");					\
fs/fscache/internal.h:466:		pr_err("\n");					\
fs/fscache/internal.h:475:		pr_err("\n");					\
fs/jffs2/debug.c:428:	printk("\n");
fs/jffs2/debug.c:756:				printk("\n");
fs/jffs2/debug.c:766:	printk("\n");
fs/reiserfs/item_ops.c:617:	printk("\n");
fs/reiserfs/prints.c:471:			printk("\n");
fs/reiserfs/prints.c:473:	printk("\n");
fs/ubifs/debug.c:926:	pr_err("\n");
include/linux/hdlc.h:85:	printk("\n");
init/do_mounts.c:472:	printk("\n");
kernel/kcsan/report.c:314:	pr_err("\n");
kernel/kcsan/report.c:379:	pr_err("\n");
kernel/kcsan/report.c:397:		pr_err("\n");
kernel/kcsan/report.c:420:	pr_err("\n");
kernel/locking/lockdep.c:1644:	pr_warn("\n");
kernel/locking/lockdep.c:1974:		printk("\n");
kernel/locking/lockdep.c:2057:	pr_warn("\n");
kernel/locking/lockdep.c:2375:	pr_warn("\n");
kernel/locking/lockdep.c:2947:		printk("\n");
kernel/locking/lockdep.c:2955:	pr_warn("\n");
kernel/locking/lockdep.c:3323:	pr_warn("\n");
kernel/locking/lockdep.c:3384:	pr_warn("\n");
kernel/locking/lockdep.c:4053:	pr_warn("\n");
kernel/locking/lockdep.c:4240:	pr_warn("\n");
kernel/locking/lockdep.c:4456:	pr_warn("\n");
kernel/locking/lockdep.c:5107:	pr_warn("\n");
kernel/locking/lockdep.c:5736:	pr_warn("\n");
kernel/locking/lockdep.c:5794:	pr_warn("\n");
kernel/locking/lockdep.c:5833:	pr_warn("\n");
kernel/locking/lockdep.c:5860:		pr_warn("\n");
kernel/locking/lockdep.c:5882:	pr_warn("\n");
kernel/locking/rtmutex-debug.c:56:		printk("\n");
kernel/locking/rtmutex-debug.c:106:	pr_warn("\n");
kernel/sched/topology.c:49:			printk("\n");
kernel/trace/trace.c:3158:	pr_warn("\n");
mm/kasan/report.c:177:		pr_err("\n");
mm/kasan/report.c:181:			pr_err("\n");
mm/kasan/report.c:188:			pr_err("\n");
mm/kasan/report.c:193:			pr_err("\n");
mm/kasan/report.c:267:	pr_err("\n");
mm/kasan/report.c:368:	pr_err("\n");
mm/kasan/report.c:384:	pr_err("\n");
mm/kasan/report.c:476:	pr_err("\n");
mm/kasan/report.c:478:	pr_err("\n");
mm/kasan/report.c:510:	pr_err("\n");
mm/kasan/report.c:514:		pr_err("\n");
net/atm/lec.c:1185:	pr_info("\n");

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Andy Shevchenko]

On Mon, Jul 20, 2020 at 9:45 AM Marco Elver <elver@google.com> wrote:
> On Sun, Jul 19, 2020 at 12:43PM +0900, Sergey Senozhatsky wrote:
> > On (20/07/18 14:10), Marco Elver wrote:
> > >
> > > It seems this causes a regression observed at least with newline-only
> > > printks. I noticed this during -next testing because various debugging
> > > tools (K*SAN, lockdep, etc.) use e.g. pr_{err,warn,info}("\n") to format
> > > reports.
> > >
> > > Without wanting to wait for a report from one of these debugging tools,
> > > a simple reproducer is below. Without this patch, the expected newline
> > > is printed.
> >
> > Empty/blank lines carry no valuable payload, could you please explain
> > why do you consider this to be a regression?
>
> Empty/blank lines are visually valuable.
>
> Did I miss a discussion somewhere that this change is acceptable?
> Unfortunately, I can't find it mentioned in the commit message, and
> therefore assumed it's a regression.
>
> As I said, a number of debugging tools use them to format reports to be
> more readable (visually separate title and report body, and separate
> parts of the report).

While I can find it useful in some cases, though messages can be
interleaved, ...

> Also, such reports are often parsed by CI systems,
> and by changing the reports, these CI systems may break. But those are
> just the usecases I'm acutely aware of -- please see a full list of
> newline-print users below.

...but this is a weak argument. If your CI relies on message rather on
the ABI, you earn the breakage.
Go and fix your CI to do sane things instead.

> Breaking the observable behaviour of a widely used interface such as
> printk doesn't seem right. Where the newline-print is inappropriate,
> wouldn't removing that newline-print be more appropriate (instead of
> forcing this behaviour on everyone)?

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Sergey Senozhatsky]

On (20/07/20 08:43), Marco Elver wrote:
[..]
> please see a full list of newline-print users below.
[..]
> $> git grep -En '\<(printk|pr_err|pr_warn|pr_info)\>\("\\n"\)'
> arch/alpha/kernel/core_wildfire.c:650:	printk("\n");
> arch/alpha/kernel/core_wildfire.c:658:	printk("\n");
> arch/alpha/kernel/traps.c:120:	printk("\n");
[..]

In many cases printk("\n") is not for "print a blank line", but
rather for "flush pr_cont buffer".

	-ss

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Sergey Senozhatsky]

On (20/07/20 08:43), Marco Elver wrote:
> On Sun, Jul 19, 2020 at 12:43PM +0900, Sergey Senozhatsky wrote:
> 
> As I said, a number of debugging tools use them to format reports to be
> more readable (visually separate title and report body, and separate
> parts of the report). Also, such reports are often parsed by CI systems,
> and by changing the reports, these CI systems may break. But those are
> just the usecases I'm acutely aware of

Can you give example of such CI systems? // that's a real question //

	-ss

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Marco Elver]

On Mon, 20 Jul 2020 at 10:41, Sergey Senozhatsky
<sergey.senozhatsky@gmail.com> wrote:
>
> On (20/07/20 08:43), Marco Elver wrote:
> > On Sun, Jul 19, 2020 at 12:43PM +0900, Sergey Senozhatsky wrote:
> >
> > As I said, a number of debugging tools use them to format reports to be
> > more readable (visually separate title and report body, and separate
> > parts of the report). Also, such reports are often parsed by CI systems,
> > and by changing the reports, these CI systems may break. But those are
> > just the usecases I'm acutely aware of
>
> Can you give example of such CI systems? // that's a real question //

None of ours should break; I agree the CI system is brittle if it
relies on newlines. Parsed and displayed reports are changing, however
-- what irks me is now all the reports sent to the LKML look ugly.

Some random KASAN reports (just compare formatting):
next (ugly): https://lore.kernel.org/lkml/000000000000c87b7305aadb6dba@google.com/
mainline (normal):
https://lore.kernel.org/lkml/000000000000f4ef6a05aa92ec6c@google.com/

The same problem exists with lockdep reports, KCSAN reports, ... If
newline-printks to insert blank lines are now banned, what are we to
do? Send dozens of patches to switch everyone to printk(" \n")? Or
some better suggestion? I cannot yet see how that is an improvement.
(And if the behaviour is not reverted, please document the new
behaviour.)

That also doesn't yet address the ~400 other newline-printk users, and
somebody needs to do the due diligence to understand if it's just a
flush, or an intentional blank line.

Thanks,
-- Marco

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Dmitry Vyukov]

On Mon, Jul 20, 2020 at 11:41 AM Marco Elver <elver@google.com> wrote:
>
> On Mon, 20 Jul 2020 at 10:41, Sergey Senozhatsky
> <sergey.senozhatsky@gmail.com> wrote:
> >
> > On (20/07/20 08:43), Marco Elver wrote:
> > > On Sun, Jul 19, 2020 at 12:43PM +0900, Sergey Senozhatsky wrote:
> > >
> > > As I said, a number of debugging tools use them to format reports to be
> > > more readable (visually separate title and report body, and separate
> > > parts of the report). Also, such reports are often parsed by CI systems,
> > > and by changing the reports, these CI systems may break. But those are
> > > just the usecases I'm acutely aware of
> >
> > Can you give example of such CI systems? // that's a real question //
>
> None of ours should break; I agree the CI system is brittle if it
> relies on newlines. Parsed and displayed reports are changing, however
> -- what irks me is now all the reports sent to the LKML look ugly.
>
> Some random KASAN reports (just compare formatting):
> next (ugly): https://lore.kernel.org/lkml/000000000000c87b7305aadb6dba@google.com/
> mainline (normal):
> https://lore.kernel.org/lkml/000000000000f4ef6a05aa92ec6c@google.com/
>
> The same problem exists with lockdep reports, KCSAN reports, ... If
> newline-printks to insert blank lines are now banned, what are we to
> do? Send dozens of patches to switch everyone to printk(" \n")? Or
> some better suggestion? I cannot yet see how that is an improvement.
> (And if the behaviour is not reverted, please document the new
> behaviour.)
>
> That also doesn't yet address the ~400 other newline-printk users, and
> somebody needs to do the due diligence to understand if it's just a
> flush, or an intentional blank line.


Empty lines improve readability of long crash reports significantly.
New lines in sanitizer reports originated in Go race reports 7 years
ago and then spread to user-space ASAN/MSAN/TSAN b/c that was an
improvement and then were specifically added to kernel sanitizers.
This is even more important now that we have up to 5 stacks in KASAN
reports.
Please keep them.

Also having lots of printk("\n") sprinkled in kernel code and turning
them into no-op separately does not look like the right solution.
These printk("\n") are confusing and add clutter. A better solution
would be to remove these printk("\n") from the code. But this also
naturally allows selective removal. Say, keeping for sanitizers and
some other cases, but removing some that are not useful.

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[John Ogness]

On 2020-07-18, Marco Elver <elver@google.com> wrote:
> It seems this causes a regression observed at least with newline-only
> printks.
> [...]
> ------ >8 ------
>
> --- a/init/main.c
> +++ b/init/main.c
> @@ -1039,6 +1039,10 @@ asmlinkage __visible void __init start_kernel(void)
>  	sfi_init_late();
>  	kcsan_init();
>  
> +	pr_info("EXPECT BLANK LINE --vv\n");
> +	pr_info("\n");
> +	pr_info("EXPECT BLANK LINE --^^\n");
> +
>  	/* Do the rest non-__init'ed, we're now alive */
>  	arch_call_rest_init();

Thanks for the example. This is an unintentional regression in the
series. I will submit a patch to fix this.

Note that this regression does not exist when the followup series [0]
(reimplementing LOG_CONT) is applied. All the more reason that the 1st
series should be fixed before pushing the 2nd series to linux-next.

John Ogness

[0] https://lkml.kernel.org/r/20200717234818.8622-1-john.ogness@linutronix.de

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Marco Elver]

On Mon, 20 Jul 2020 at 12:20, John Ogness <john.ogness@linutronix.de> wrote:
>
> On 2020-07-18, Marco Elver <elver@google.com> wrote:
> > It seems this causes a regression observed at least with newline-only
> > printks.
> > [...]
> > ------ >8 ------
> >
> > --- a/init/main.c
> > +++ b/init/main.c
> > @@ -1039,6 +1039,10 @@ asmlinkage __visible void __init start_kernel(void)
> >       sfi_init_late();
> >       kcsan_init();
> >
> > +     pr_info("EXPECT BLANK LINE --vv\n");
> > +     pr_info("\n");
> > +     pr_info("EXPECT BLANK LINE --^^\n");
> > +
> >       /* Do the rest non-__init'ed, we're now alive */
> >       arch_call_rest_init();
>
> Thanks for the example. This is an unintentional regression in the
> series. I will submit a patch to fix this.
>
> Note that this regression does not exist when the followup series [0]
> (reimplementing LOG_CONT) is applied. All the more reason that the 1st
> series should be fixed before pushing the 2nd series to linux-next.

Great, thank you for clarifying! :-)

-- Marco

> John Ogness
>
> [0] https://lkml.kernel.org/r/20200717234818.8622-1-john.ogness@linutronix.de

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[Nick Desaulniers]

From what I can tell, I think this patch ("printk: use the lockless
ringbuffer") breaks lx-dmesg in CONFIG_GDB_SCRIPTS.

(gdb) lx-dmesg
Python Exception <class 'gdb.error'> No symbol "log_first_idx" in specified context.: 
Error occurred in Python: No symbol "log_first_idx" in specified context.

This command is used to dump the printk log buffer.

It looks like the only places left in the kernel that reference are:

- Documentation/admin-guide/kdump/gdbmacros.txt
- Documentation/admin-guide/kdump/vmcoreinfo.rst
- scripts/gdb/linux/dmesg.py

I believe this commit removed log_first_idx, so all of the above probably need
to be fixed up, too.

~ Nick

Re: [PATCH v5 4/4] printk: use the lockless ringbuffer

[John Ogness]

On 2020-08-11, Nick Desaulniers <ndesaulniers@google.com> wrote:
> From what I can tell, I think this patch ("printk: use the lockless
> ringbuffer") breaks lx-dmesg in CONFIG_GDB_SCRIPTS.
>
> (gdb) lx-dmesg
> Python Exception <class 'gdb.error'> No symbol "log_first_idx" in specified context.: 
> Error occurred in Python: No symbol "log_first_idx" in specified context.
>
> This command is used to dump the printk log buffer.
>
> It looks like the only places left in the kernel that reference are:
>
> - Documentation/admin-guide/kdump/gdbmacros.txt
> - Documentation/admin-guide/kdump/vmcoreinfo.rst
> - scripts/gdb/linux/dmesg.py
>
> I believe this commit removed log_first_idx, so all of the above
> probably need to be fixed up, too.

Thanks for pointing this out! I will get to work on a patch for this.

John Ogness

Issue in dmesg time with lockless ring buffer

[J. Avila]

Hello,

When doing some internal testing on a 5.10.4 kernel, we found that the
time taken for dmesg seemed to increase from the order of milliseconds to
the order of seconds when the dmesg size approached the ~1.2MB limit. After
doing some digging, we found that by reverting all of the patches in printk/
up to and including 896fbe20b4e2333fb55cc9b9b783ebcc49eee7c7 ("use the
lockless ringbuffer"), we were able to once more see normal dmesg times.

This kernel had no meaningful diffs in the printk/ dir when compared to
Linus' tree. This behavior was consistently reproducible using the
following steps:

1) In one shell, run "time dmesg > /dev/null"
2) In another, constantly write to /dev/kmsg

Within ~5 minutes, we saw that dmesg times increased to 1 second, only
increasing further from there. Is this a known issue?

Thank you,

Avila

Re: Issue in dmesg time with lockless ring buffer

[John Ogness]

On 2021-01-22, "J. Avila" <elavila@google.com> wrote:
> When doing some internal testing on a 5.10.4 kernel, we found that the
> time taken for dmesg seemed to increase from the order of milliseconds
> to the order of seconds when the dmesg size approached the ~1.2MB
> limit. After doing some digging, we found that by reverting all of the
> patches in printk/ up to and including
> 896fbe20b4e2333fb55cc9b9b783ebcc49eee7c7 ("use the lockless
> ringbuffer"), we were able to once more see normal dmesg times.
>
> This kernel had no meaningful diffs in the printk/ dir when compared
> to Linus' tree. This behavior was consistently reproducible using the
> following steps:
>
> 1) In one shell, run "time dmesg > /dev/null"
> 2) In another, constantly write to /dev/kmsg
>
> Within ~5 minutes, we saw that dmesg times increased to 1 second, only
> increasing further from there. Is this a known issue?

The last couple days I have tried to reproduce this issue with no
success.

Is your dmesg using /dev/kmsg or syslog() to read the buffer?

Are there any syslog daemons or systemd running? Perhaps you can run
your test within an initrd to see if this effect is still visible?

John Ogness

Re: Issue in dmesg time with lockless ring buffer

[J. Avila]

Hello,

This dmesg uses /dev/kmsg; we've verified that we don't see this long
dmesg time when reading from syslog (via dmesg -S).

We've also tried testing this with logging daemons disabled as well as
within initrd - both result in similar behavior.

If it's relevant, this was done on a toybox shell.

Thanks,

Avila

On Mon, Jan 25, 2021 at 5:32 AM John Ogness <john.ogness@linutronix.de> wrote:
>
> On 2021-01-22, "J. Avila" <elavila@google.com> wrote:
> > When doing some internal testing on a 5.10.4 kernel, we found that the
> > time taken for dmesg seemed to increase from the order of milliseconds
> > to the order of seconds when the dmesg size approached the ~1.2MB
> > limit. After doing some digging, we found that by reverting all of the
> > patches in printk/ up to and including
> > 896fbe20b4e2333fb55cc9b9b783ebcc49eee7c7 ("use the lockless
> > ringbuffer"), we were able to once more see normal dmesg times.
> >
> > This kernel had no meaningful diffs in the printk/ dir when compared
> > to Linus' tree. This behavior was consistently reproducible using the
> > following steps:
> >
> > 1) In one shell, run "time dmesg > /dev/null"
> > 2) In another, constantly write to /dev/kmsg
> >
> > Within ~5 minutes, we saw that dmesg times increased to 1 second, only
> > increasing further from there. Is this a known issue?
>
> The last couple days I have tried to reproduce this issue with no
> success.
>
> Is your dmesg using /dev/kmsg or syslog() to read the buffer?
>
> Are there any syslog daemons or systemd running? Perhaps you can run
> your test within an initrd to see if this effect is still visible?
>
> John Ogness

Re: Issue in dmesg time with lockless ring buffer

[J. Avila]

Hello John,

I’ve done some additional digging on my end. I tested using a 5.10.11
kernel and observed the following:

1) With the default of CONFIG_LOG_BUF_SHIFT=17, I was not able to reproduce
   the issue.
2) With CONFIG_LOG_BUF_SHIFT=20, I was able to reproduce the behavior
   mentioned before.
3) With (2) + reverting up to and including 896fbe20b4e2 (printk: use the
   lockless ringbuffer), I saw short dmesg times again.

It seems that this issue may only exist with a sufficiently big log buffer
size. Despite 1MB being a relatively uncommon size for linux kernel log
buffers, this still indicates a potential issue in the code; do you think
it's worth investigation?

Thanks,

Avila

On Mon, Jan 25, 2021 at 4:00 PM J. Avila <elavila@google.com> wrote:
>
> Hello,
>
> This dmesg uses /dev/kmsg; we've verified that we don't see this long
> dmesg time when reading from syslog (via dmesg -S).
>
> We've also tried testing this with logging daemons disabled as well as
> within initrd - both result in similar behavior.
>
> If it's relevant, this was done on a toybox shell.
>
> Thanks,
>
> Avila
>
> On Mon, Jan 25, 2021 at 5:32 AM John Ogness <john.ogness@linutronix.de> wrote:
> >
> > On 2021-01-22, "J. Avila" <elavila@google.com> wrote:
> > > When doing some internal testing on a 5.10.4 kernel, we found that the
> > > time taken for dmesg seemed to increase from the order of milliseconds
> > > to the order of seconds when the dmesg size approached the ~1.2MB
> > > limit. After doing some digging, we found that by reverting all of the
> > > patches in printk/ up to and including
> > > 896fbe20b4e2333fb55cc9b9b783ebcc49eee7c7 ("use the lockless
> > > ringbuffer"), we were able to once more see normal dmesg times.
> > >
> > > This kernel had no meaningful diffs in the printk/ dir when compared
> > > to Linus' tree. This behavior was consistently reproducible using the
> > > following steps:
> > >
> > > 1) In one shell, run "time dmesg > /dev/null"
> > > 2) In another, constantly write to /dev/kmsg
> > >
> > > Within ~5 minutes, we saw that dmesg times increased to 1 second, only
> > > increasing further from there. Is this a known issue?
> >
> > The last couple days I have tried to reproduce this issue with no
> > success.
> >
> > Is your dmesg using /dev/kmsg or syslog() to read the buffer?
> >
> > Are there any syslog daemons or systemd running? Perhaps you can run
> > your test within an initrd to see if this effect is still visible?
> >
> > John Ogness

Re: [PATCH v5 0/4] printk: replace ringbuffer

[Petr Mladek]

On Thu 2020-07-09 15:29:40, John Ogness wrote:
> Hello,
> 
> Here is a v5 for the first series to rework the printk
> subsystem. The v4 is here [0]. This first series
> only replaces the existing ringbuffer implementation. No locking
> is removed. The semantics/behavior of printk are kept the same
> except for a minor optimization that is reverted (patch 3).
> 
> John Ogness (4):
>   crash: add VMCOREINFO macro to define offset in a struct declared by
>     typedef
>   printk: add lockless ringbuffer
>   Revert "printk: lock/unlock console only for new logbuf entries"
>   printk: use the lockless ringbuffer

The patchset is committed in printk/linux.git, branch printk-rework.

I did not add any target kernel version into the topic branch name.
We could use it for the entire rework. The pieces would go into
mainline when we and linux-next are happy.

Best Regards,
Petr

Re: [PATCH v5 0/4] printk: replace ringbuffer

[Sergey Senozhatsky]

On (20/07/10 10:28), Petr Mladek wrote:
> On Thu 2020-07-09 15:29:40, John Ogness wrote:
> > Hello,
> > 
> > Here is a v5 for the first series to rework the printk
> > subsystem. The v4 is here [0]. This first series
> > only replaces the existing ringbuffer implementation. No locking
> > is removed. The semantics/behavior of printk are kept the same
> > except for a minor optimization that is reverted (patch 3).
> > 
> > John Ogness (4):
> >   crash: add VMCOREINFO macro to define offset in a struct declared by
> >     typedef
> >   printk: add lockless ringbuffer
> >   Revert "printk: lock/unlock console only for new logbuf entries"
> >   printk: use the lockless ringbuffer
> 
> The patchset is committed in printk/linux.git, branch printk-rework.

FWIW,
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

Thank you.

	-ss