linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Regression with mainline kernel on rpi4
@ 2021-09-02  9:08 Sudip Mukherjee
  2021-09-03 16:03 ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Sudip Mukherjee @ 2021-09-02  9:08 UTC (permalink / raw)
  To: Emma Anholt, Maxime Ripard, David Airlie, Daniel Vetter, Philipp Zabel
  Cc: dri-devel, linux-kernel, Linus Torvalds

Hi All,

Our last night's test on rpi4 had a nasty trace. The test was with
7c636d4d20f8 ("Merge tag 'dt-5.15' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc"). Previous test
was on 9e9fb7655ed5 ("Merge tag 'net-next-5.15' of
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next") and it
did not have this trace.

[   40.975161] Unable to handle kernel access to user memory outside
uaccess routines at virtual address 0000000000000348
[   40.986187] Mem abort info:
[   40.989062]   ESR = 0x96000004
[   40.992233]   EC = 0x25: DABT (current EL), IL = 32 bits
[   40.997699]   SET = 0, FnV = 0
[   41.001205]   EA = 0, S1PTW = 0
[   41.004428]   FSC = 0x04: level 0 translation fault
[   41.009468] Data abort info:
[   41.012410]   ISV = 0, ISS = 0x00000004
[   41.016325]   CM = 0, WnR = 0
[   41.019358] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000042ae1000
[   41.025926] [0000000000000348] pgd=0000000000000000, p4d=0000000000000000
[   41.032845] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   41.038495] Modules linked in: overlay algif_hash algif_skcipher
af_alg bnep sch_fq_codel ppdev lp parport ip_tables x_tables autofs4
btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov
async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq
libcrc32c raid1 raid0 multipath linear uas usb_storage
snd_soc_hdmi_codec btsdio brcmfmac brcmutil hci_uart btqca btrtl
bcm2835_v4l2(C) btbcm crct10dif_ce bcm2835_mmal_vchiq(C) btintel
raspberrypi_hwmon videobuf2_vmalloc videobuf2_memops bluetooth
videobuf2_v4l2 videobuf2_common cfg80211 ecdh_generic ecc vc4
drm_kms_helper videodev dwc2 cec snd_bcm2835(C) i2c_brcmstb udc_core
roles drm xhci_pci mc pwm_bcm2835 xhci_pci_renesas snd_soc_core
ac97_bus snd_pcm_dmaengine snd_pcm phy_generic snd_timer
uio_pdrv_genirq snd fb_sys_fops syscopyarea sysfillrect sysimgblt uio
aes_neon_bs aes_neon_blk crypto_simd cryptd
[   41.116584] CPU: 0 PID: 1569 Comm: pulseaudio Tainted: G         C
      5.14.0-7c636d4d20f8 #1
[   41.125494] Hardware name: Raspberry Pi 4 Model B (DT)
[   41.130699] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   41.137756] pc : vc4_hdmi_audio_prepare+0x3c0/0xba4 [vc4]
[   41.143256] lr : vc4_hdmi_audio_prepare+0x308/0xba4 [vc4]
[   41.148747] sp : ffff800012f73a50
[   41.152099] x29: ffff800012f73a50 x28: ffff0000562ecc00 x27: 0000000000000000
[   41.159338] x26: 0000000000000000 x25: 000000000000ac44 x24: 0000000021002003
[   41.166574] x23: ffff800012f73b40 x22: 0000000000000003 x21: ffff000059400080
[   41.173811] x20: ffff0000594004c8 x19: 0005833333380600 x18: 0000000000000000
[   41.181047] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   41.188283] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000991
[   41.195520] x11: 0000000000000001 x10: 000000000001d4c0 x9 : ffff800009047838
[   41.202757] x8 : 0000000000000031 x7 : 000000000001d4c0 x6 : 0000000000000030
[   41.209993] x5 : ffff800012f73a98 x4 : ffff80000905bb60 x3 : 0000000010624dd3
[   41.217230] x2 : 00000000000003e8 x1 : 0000000000000000 x0 : 0000000000562200
[   41.224466] Call trace:
[   41.226939]  vc4_hdmi_audio_prepare+0x3c0/0xba4 [vc4]
[   41.232080]  hdmi_codec_prepare+0xe8/0x1b0 [snd_soc_hdmi_codec]
[   41.238083]  snd_soc_pcm_dai_prepare+0x5c/0x10c [snd_soc_core]
[   41.244038]  soc_pcm_prepare+0x5c/0x130 [snd_soc_core]
[   41.249276]  snd_pcm_prepare+0x150/0x1f0 [snd_pcm]
[   41.254149]  snd_pcm_common_ioctl+0x1644/0x1d14 [snd_pcm]
[   41.259635]  snd_pcm_ioctl+0x3c/0x5c [snd_pcm]
[   41.264152]  __arm64_sys_ioctl+0xb4/0x100
[   41.268216]  invoke_syscall+0x50/0x120
[   41.272014]  el0_svc_common+0x18c/0x1a4
[   41.275899]  do_el0_svc+0x34/0x9c
[   41.279254]  el0_svc+0x2c/0xc0
[   41.282348]  el0t_64_sync_handler+0xa4/0x12c
[   41.286673]  el0t_64_sync+0x1a4/0x1a8
[   41.290385] Code: 52807d02 72a20c43 f9400421 9ba37c13 (f941a423)
[   41.296563] ---[ end trace dcfe08f10aaf6873 ]---

You can see the complete dmesg at
https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8

-- 
Regards
Sudip

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-02  9:08 Regression with mainline kernel on rpi4 Sudip Mukherjee
@ 2021-09-03 16:03 ` Maxime Ripard
  2021-09-03 20:09   ` Sudip Mukherjee
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-03 16:03 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

[-- Attachment #1: Type: text/plain, Size: 4396 bytes --]

Hi Sudip,

On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> Hi All,
> 
> Our last night's test on rpi4 had a nasty trace. The test was with
> 7c636d4d20f8 ("Merge tag 'dt-5.15' of
> git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc"). Previous test
> was on 9e9fb7655ed5 ("Merge tag 'net-next-5.15' of
> git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next") and it
> did not have this trace.
> 
> [   40.975161] Unable to handle kernel access to user memory outside
> uaccess routines at virtual address 0000000000000348
> [   40.986187] Mem abort info:
> [   40.989062]   ESR = 0x96000004
> [   40.992233]   EC = 0x25: DABT (current EL), IL = 32 bits
> [   40.997699]   SET = 0, FnV = 0
> [   41.001205]   EA = 0, S1PTW = 0
> [   41.004428]   FSC = 0x04: level 0 translation fault
> [   41.009468] Data abort info:
> [   41.012410]   ISV = 0, ISS = 0x00000004
> [   41.016325]   CM = 0, WnR = 0
> [   41.019358] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000042ae1000
> [   41.025926] [0000000000000348] pgd=0000000000000000, p4d=0000000000000000
> [   41.032845] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [   41.038495] Modules linked in: overlay algif_hash algif_skcipher
> af_alg bnep sch_fq_codel ppdev lp parport ip_tables x_tables autofs4
> btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov
> async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq
> libcrc32c raid1 raid0 multipath linear uas usb_storage
> snd_soc_hdmi_codec btsdio brcmfmac brcmutil hci_uart btqca btrtl
> bcm2835_v4l2(C) btbcm crct10dif_ce bcm2835_mmal_vchiq(C) btintel
> raspberrypi_hwmon videobuf2_vmalloc videobuf2_memops bluetooth
> videobuf2_v4l2 videobuf2_common cfg80211 ecdh_generic ecc vc4
> drm_kms_helper videodev dwc2 cec snd_bcm2835(C) i2c_brcmstb udc_core
> roles drm xhci_pci mc pwm_bcm2835 xhci_pci_renesas snd_soc_core
> ac97_bus snd_pcm_dmaengine snd_pcm phy_generic snd_timer
> uio_pdrv_genirq snd fb_sys_fops syscopyarea sysfillrect sysimgblt uio
> aes_neon_bs aes_neon_blk crypto_simd cryptd
> [   41.116584] CPU: 0 PID: 1569 Comm: pulseaudio Tainted: G         C
>       5.14.0-7c636d4d20f8 #1
> [   41.125494] Hardware name: Raspberry Pi 4 Model B (DT)
> [   41.130699] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [   41.137756] pc : vc4_hdmi_audio_prepare+0x3c0/0xba4 [vc4]
> [   41.143256] lr : vc4_hdmi_audio_prepare+0x308/0xba4 [vc4]
> [   41.148747] sp : ffff800012f73a50
> [   41.152099] x29: ffff800012f73a50 x28: ffff0000562ecc00 x27: 0000000000000000
> [   41.159338] x26: 0000000000000000 x25: 000000000000ac44 x24: 0000000021002003
> [   41.166574] x23: ffff800012f73b40 x22: 0000000000000003 x21: ffff000059400080
> [   41.173811] x20: ffff0000594004c8 x19: 0005833333380600 x18: 0000000000000000
> [   41.181047] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
> [   41.188283] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000991
> [   41.195520] x11: 0000000000000001 x10: 000000000001d4c0 x9 : ffff800009047838
> [   41.202757] x8 : 0000000000000031 x7 : 000000000001d4c0 x6 : 0000000000000030
> [   41.209993] x5 : ffff800012f73a98 x4 : ffff80000905bb60 x3 : 0000000010624dd3
> [   41.217230] x2 : 00000000000003e8 x1 : 0000000000000000 x0 : 0000000000562200
> [   41.224466] Call trace:
> [   41.226939]  vc4_hdmi_audio_prepare+0x3c0/0xba4 [vc4]
> [   41.232080]  hdmi_codec_prepare+0xe8/0x1b0 [snd_soc_hdmi_codec]
> [   41.238083]  snd_soc_pcm_dai_prepare+0x5c/0x10c [snd_soc_core]
> [   41.244038]  soc_pcm_prepare+0x5c/0x130 [snd_soc_core]
> [   41.249276]  snd_pcm_prepare+0x150/0x1f0 [snd_pcm]
> [   41.254149]  snd_pcm_common_ioctl+0x1644/0x1d14 [snd_pcm]
> [   41.259635]  snd_pcm_ioctl+0x3c/0x5c [snd_pcm]
> [   41.264152]  __arm64_sys_ioctl+0xb4/0x100
> [   41.268216]  invoke_syscall+0x50/0x120
> [   41.272014]  el0_svc_common+0x18c/0x1a4
> [   41.275899]  do_el0_svc+0x34/0x9c
> [   41.279254]  el0_svc+0x2c/0xc0
> [   41.282348]  el0t_64_sync_handler+0xa4/0x12c
> [   41.286673]  el0t_64_sync+0x1a4/0x1a8
> [   41.290385] Code: 52807d02 72a20c43 f9400421 9ba37c13 (f941a423)
> [   41.296563] ---[ end trace dcfe08f10aaf6873 ]---
> 
> You can see the complete dmesg at
> https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8

What test were you running?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-03 16:03 ` Maxime Ripard
@ 2021-09-03 20:09   ` Sudip Mukherjee
  2021-09-04  9:10     ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Sudip Mukherjee @ 2021-09-03 20:09 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

Hi Maxime,

On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
>
> Hi Sudip,
>
> On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > Hi All,
> >
>

<snip>

>
> >
> > You can see the complete dmesg at
> > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
>
> What test were you running?

Nothing particular, its just a boot test that we do every night after
pulling from torvalds/linux.git


-- 
Regards
Sudip

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-03 20:09   ` Sudip Mukherjee
@ 2021-09-04  9:10     ` Maxime Ripard
  2021-09-04  9:40       ` Sudip Mukherjee
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-04  9:10 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

[-- Attachment #1: Type: text/plain, Size: 608 bytes --]

On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> Hi Maxime,
> 
> On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > Hi Sudip,
> >
> > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > Hi All,
> > >
> >
> 
> <snip>
> 
> >
> > >
> > > You can see the complete dmesg at
> > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> >
> > What test were you running?
> 
> Nothing particular, its just a boot test that we do every night after
> pulling from torvalds/linux.git

What are you booting to then?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-04  9:10     ` Maxime Ripard
@ 2021-09-04  9:40       ` Sudip Mukherjee
  2021-09-20 14:47         ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Sudip Mukherjee @ 2021-09-04  9:40 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

Hi Maxime,

On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > Hi Maxime,
> >
> > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > Hi Sudip,
> > >
> > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > Hi All,
> > > >
> > >
> >
> > <snip>
> >
> > >
> > > >
> > > > You can see the complete dmesg at
> > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > >
> > > What test were you running?
> >
> > Nothing particular, its just a boot test that we do every night after
> > pulling from torvalds/linux.git
>
> What are you booting to then?

I am not sure I understood the question.
Its an Ubuntu image. The desktop environment is gnome. And as
mentioned earlier, we use the HEAD of linus tree every night to boot
the rpi4 and test that we can login via desktop environment and that
there is no regression in dmesg.


-- 
Regards
Sudip

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-04  9:40       ` Sudip Mukherjee
@ 2021-09-20 14:47         ` Maxime Ripard
  2021-09-20 15:43           ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-20 14:47 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

[-- Attachment #1: Type: text/plain, Size: 1338 bytes --]

On Sat, Sep 04, 2021 at 10:40:29AM +0100, Sudip Mukherjee wrote:
> Hi Maxime,
> 
> On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > > Hi Maxime,
> > >
> > > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > Hi Sudip,
> > > >
> > > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > > Hi All,
> > > > >
> > > >
> > >
> > > <snip>
> > >
> > > >
> > > > >
> > > > > You can see the complete dmesg at
> > > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > > >
> > > > What test were you running?
> > >
> > > Nothing particular, its just a boot test that we do every night after
> > > pulling from torvalds/linux.git
> >
> > What are you booting to then?
> 
> I am not sure I understood the question.
> Its an Ubuntu image. The desktop environment is gnome. And as
> mentioned earlier, we use the HEAD of linus tree every night to boot
> the rpi4 and test that we can login via desktop environment and that
> there is no regression in dmesg.

Looking at the CI, this isn't from a RPi but from qemu?

What defconfig are you using? How did you generate the Ubuntu image?
Through debootstrap? Any additional package?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-20 14:47         ` Maxime Ripard
@ 2021-09-20 15:43           ` Maxime Ripard
  2021-09-20 15:53             ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-20 15:43 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

[-- Attachment #1: Type: text/plain, Size: 1911 bytes --]

On Mon, Sep 20, 2021 at 04:47:31PM +0200, Maxime Ripard wrote:
> On Sat, Sep 04, 2021 at 10:40:29AM +0100, Sudip Mukherjee wrote:
> > Hi Maxime,
> > 
> > On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > > > Hi Maxime,
> > > >
> > > > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > >
> > > > > Hi Sudip,
> > > > >
> > > > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > > > Hi All,
> > > > > >
> > > > >
> > > >
> > > > <snip>
> > > >
> > > > >
> > > > > >
> > > > > > You can see the complete dmesg at
> > > > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > > > >
> > > > > What test were you running?
> > > >
> > > > Nothing particular, its just a boot test that we do every night after
> > > > pulling from torvalds/linux.git
> > >
> > > What are you booting to then?
> > 
> > I am not sure I understood the question.
> > Its an Ubuntu image. The desktop environment is gnome. And as
> > mentioned earlier, we use the HEAD of linus tree every night to boot
> > the rpi4 and test that we can login via desktop environment and that
> > there is no regression in dmesg.
> 
> Looking at the CI, this isn't from a RPi but from qemu?
> 
> What defconfig are you using? How did you generate the Ubuntu image?
> Through debootstrap? Any additional package?

So qemu (at least on Fedora 34) doesn't seem to have an RPI4 target, nor
upstream:
https://github.com/qemu/qemu/blob/079b1252e9de384385c9da910262312ec2e574c8/hw/arm/raspi.c#L367

I've tested an Ubuntu 21.04 arm64 build (since it seems like it's what
you've been using), built using debootstrap + ubuntu-desktop, both with
and without a monitor attached, and up to the desktop once logged in.

I don't see any crash.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-20 15:43           ` Maxime Ripard
@ 2021-09-20 15:53             ` Maxime Ripard
  2021-09-20 16:35               ` Sudip Mukherjee
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-20 15:53 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

[-- Attachment #1: Type: text/plain, Size: 2117 bytes --]

On Mon, Sep 20, 2021 at 05:43:33PM +0200, Maxime Ripard wrote:
> On Mon, Sep 20, 2021 at 04:47:31PM +0200, Maxime Ripard wrote:
> > On Sat, Sep 04, 2021 at 10:40:29AM +0100, Sudip Mukherjee wrote:
> > > Hi Maxime,
> > > 
> > > On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > > > > Hi Maxime,
> > > > >
> > > > > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > >
> > > > > > Hi Sudip,
> > > > > >
> > > > > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > > > > Hi All,
> > > > > > >
> > > > > >
> > > > >
> > > > > <snip>
> > > > >
> > > > > >
> > > > > > >
> > > > > > > You can see the complete dmesg at
> > > > > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > > > > >
> > > > > > What test were you running?
> > > > >
> > > > > Nothing particular, its just a boot test that we do every night after
> > > > > pulling from torvalds/linux.git
> > > >
> > > > What are you booting to then?
> > > 
> > > I am not sure I understood the question.
> > > Its an Ubuntu image. The desktop environment is gnome. And as
> > > mentioned earlier, we use the HEAD of linus tree every night to boot
> > > the rpi4 and test that we can login via desktop environment and that
> > > there is no regression in dmesg.
> > 
> > Looking at the CI, this isn't from a RPi but from qemu?
> > 
> > What defconfig are you using? How did you generate the Ubuntu image?
> > Through debootstrap? Any additional package?
> 
> So qemu (at least on Fedora 34) doesn't seem to have an RPI4 target, nor
> upstream:
> https://github.com/qemu/qemu/blob/079b1252e9de384385c9da910262312ec2e574c8/hw/arm/raspi.c#L367
> 
> I've tested an Ubuntu 21.04 arm64 build (since it seems like it's what
> you've been using), built using debootstrap + ubuntu-desktop, both with
> and without a monitor attached, and up to the desktop once logged in.
> 
> I don't see any crash.

That was with arm64's defconfig.

Maxime


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-20 15:53             ` Maxime Ripard
@ 2021-09-20 16:35               ` Sudip Mukherjee
  2021-09-20 17:10                 ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Sudip Mukherjee @ 2021-09-20 16:35 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

On Mon, Sep 20, 2021 at 4:53 PM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Mon, Sep 20, 2021 at 05:43:33PM +0200, Maxime Ripard wrote:
> > On Mon, Sep 20, 2021 at 04:47:31PM +0200, Maxime Ripard wrote:
> > > On Sat, Sep 04, 2021 at 10:40:29AM +0100, Sudip Mukherjee wrote:
> > > > Hi Maxime,
> > > >
> > > > On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > >
> > > > > On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > > > > > Hi Maxime,
> > > > > >
> > > > > > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > >
> > > > > > > Hi Sudip,
> > > > > > >
> > > > > > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > > > > > Hi All,
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > > <snip>
> > > > > >
> > > > > > >
> > > > > > > >
> > > > > > > > You can see the complete dmesg at
> > > > > > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > > > > > >
> > > > > > > What test were you running?
> > > > > >
> > > > > > Nothing particular, its just a boot test that we do every night after
> > > > > > pulling from torvalds/linux.git
> > > > >
> > > > > What are you booting to then?
> > > >
> > > > I am not sure I understood the question.
> > > > Its an Ubuntu image. The desktop environment is gnome. And as
> > > > mentioned earlier, we use the HEAD of linus tree every night to boot
> > > > the rpi4 and test that we can login via desktop environment and that
> > > > there is no regression in dmesg.
> > >
> > > Looking at the CI, this isn't from a RPi but from qemu?

No, this is from rpi4 board (4GB), not qemu. The CI is a little
complicated here, lava boots the board with the new kernel and will
then trigger the openQA job. openQA will then connect to the board
using vnc to test the desktop. This is the last link that I sent to
Linus when he asked for it.
https://lava.qa.codethink.co.uk/scheduler/job/164#L1356

And this is the lava job for today -
https://lava.qa.codethink.co.uk/scheduler/job/173

> > >
> > > What defconfig are you using? How did you generate the Ubuntu image?
> > > Through debootstrap? Any additional package?

Its the default ubuntu config. I can send you the config if you want.

> >
> > So qemu (at least on Fedora 34) doesn't seem to have an RPI4 target, nor
> > upstream:
> > https://github.com/qemu/qemu/blob/079b1252e9de384385c9da910262312ec2e574c8/hw/arm/raspi.c#L367
> >

Like I said, its not on qemu.

> > I've tested an Ubuntu 21.04 arm64 build (since it seems like it's what
> > you've been using), built using debootstrap + ubuntu-desktop, both with
> > and without a monitor attached, and up to the desktop once logged in.

I am using the official ubuntu image downloaded from
https://cdimage.ubuntu.com/releases/21.04/release/ubuntu-21.04-preinstalled-desktop-arm64+raspi.img.xz


-- 
Regards
Sudip

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-20 16:35               ` Sudip Mukherjee
@ 2021-09-20 17:10                 ` Maxime Ripard
  2021-09-20 17:21                   ` Sudip Mukherjee
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-20 17:10 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

[-- Attachment #1: Type: text/plain, Size: 2558 bytes --]

On Mon, Sep 20, 2021 at 05:35:00PM +0100, Sudip Mukherjee wrote:
> On Mon, Sep 20, 2021 at 4:53 PM Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > On Mon, Sep 20, 2021 at 05:43:33PM +0200, Maxime Ripard wrote:
> > > On Mon, Sep 20, 2021 at 04:47:31PM +0200, Maxime Ripard wrote:
> > > > On Sat, Sep 04, 2021 at 10:40:29AM +0100, Sudip Mukherjee wrote:
> > > > > Hi Maxime,
> > > > >
> > > > > On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > >
> > > > > > On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > > > > > > Hi Maxime,
> > > > > > >
> > > > > > > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > >
> > > > > > > > Hi Sudip,
> > > > > > > >
> > > > > > > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > > > > > > Hi All,
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > > <snip>
> > > > > > >
> > > > > > > >
> > > > > > > > >
> > > > > > > > > You can see the complete dmesg at
> > > > > > > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > > > > > > >
> > > > > > > > What test were you running?
> > > > > > >
> > > > > > > Nothing particular, its just a boot test that we do every night after
> > > > > > > pulling from torvalds/linux.git
> > > > > >
> > > > > > What are you booting to then?
> > > > >
> > > > > I am not sure I understood the question.
> > > > > Its an Ubuntu image. The desktop environment is gnome. And as
> > > > > mentioned earlier, we use the HEAD of linus tree every night to boot
> > > > > the rpi4 and test that we can login via desktop environment and that
> > > > > there is no regression in dmesg.
> > > >
> > > > Looking at the CI, this isn't from a RPi but from qemu?
> 
> No, this is from rpi4 board (4GB), not qemu. The CI is a little
> complicated here, lava boots the board with the new kernel and will
> then trigger the openQA job. openQA will then connect to the board
> using vnc to test the desktop. This is the last link that I sent to
> Linus when he asked for it.
> https://lava.qa.codethink.co.uk/scheduler/job/164#L1356
> 
> And this is the lava job for today -
> https://lava.qa.codethink.co.uk/scheduler/job/173

Is it connected to a monitor then?

> > > >
> > > > What defconfig are you using? How did you generate the Ubuntu image?
> > > > Through debootstrap? Any additional package?
> 
> Its the default ubuntu config. I can send you the config if you want.

Yes, please.

Thanks
Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-20 17:10                 ` Maxime Ripard
@ 2021-09-20 17:21                   ` Sudip Mukherjee
  2021-09-22  9:57                     ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Sudip Mukherjee @ 2021-09-20 17:21 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

[-- Attachment #1: Type: text/plain, Size: 2873 bytes --]

On Mon, Sep 20, 2021 at 6:10 PM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Mon, Sep 20, 2021 at 05:35:00PM +0100, Sudip Mukherjee wrote:
> > On Mon, Sep 20, 2021 at 4:53 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > On Mon, Sep 20, 2021 at 05:43:33PM +0200, Maxime Ripard wrote:
> > > > On Mon, Sep 20, 2021 at 04:47:31PM +0200, Maxime Ripard wrote:
> > > > > On Sat, Sep 04, 2021 at 10:40:29AM +0100, Sudip Mukherjee wrote:
> > > > > > Hi Maxime,
> > > > > >
> > > > > > On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > >
> > > > > > > On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > > > > > > > Hi Maxime,
> > > > > > > >
> > > > > > > > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > > >
> > > > > > > > > Hi Sudip,
> > > > > > > > >
> > > > > > > > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > > > > > > > Hi All,
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > > <snip>
> > > > > > > >
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > You can see the complete dmesg at
> > > > > > > > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > > > > > > > >
> > > > > > > > > What test were you running?
> > > > > > > >
> > > > > > > > Nothing particular, its just a boot test that we do every night after
> > > > > > > > pulling from torvalds/linux.git
> > > > > > >
> > > > > > > What are you booting to then?
> > > > > >
> > > > > > I am not sure I understood the question.
> > > > > > Its an Ubuntu image. The desktop environment is gnome. And as
> > > > > > mentioned earlier, we use the HEAD of linus tree every night to boot
> > > > > > the rpi4 and test that we can login via desktop environment and that
> > > > > > there is no regression in dmesg.
> > > > >
> > > > > Looking at the CI, this isn't from a RPi but from qemu?
> >
> > No, this is from rpi4 board (4GB), not qemu. The CI is a little
> > complicated here, lava boots the board with the new kernel and will
> > then trigger the openQA job. openQA will then connect to the board
> > using vnc to test the desktop. This is the last link that I sent to
> > Linus when he asked for it.
> > https://lava.qa.codethink.co.uk/scheduler/job/164#L1356
> >
> > And this is the lava job for today -
> > https://lava.qa.codethink.co.uk/scheduler/job/173
>
> Is it connected to a monitor then?

Missed replying to this one earlier. I have a hdmi lilliput monitor
connected to it.

>
> > > > >
> > > > > What defconfig are you using? How did you generate the Ubuntu image?
> > > > > Through debootstrap? Any additional package?
> >
> > Its the default ubuntu config. I can send you the config if you want.
>
> Yes, please.

Attached.
My build script will copy this config as .config,  do olddefconfig
and then build.


-- 
Regards
Sudip

[-- Attachment #2: config-5.11.0-1009-raspi --]
[-- Type: application/octet-stream, Size: 227639 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 5.10.48-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="aarch64-linux-gcc (GCC) 11.1.1 20210702"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110101
CONFIG_LD_VERSION=236010000
CONFIG_CLANG_VERSION=0
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_IPI=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_SCHED_THERMAL_PRESSURE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_UCLAMP_TASK_GROUP is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_HAVE_FUTEX_CMPXCHG=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_LSM is not set
CONFIG_BPF_SYSCALL=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_USERMODE_DRIVER=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_MEMCG_SYSFS_ON=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_ARM64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARM64_PAGE_SHIFT=12
CONFIG_ARM64_CONT_PTE_SHIFT=4
CONFIG_ARM64_CONT_PMD_SHIFT=4
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_BITS_MAX=33
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SMP=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y

#
# Platform selection
#
# CONFIG_ARCH_ACTIONS is not set
# CONFIG_ARCH_AGILEX is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_ALPINE is not set
CONFIG_ARCH_BCM2835=y
# CONFIG_ARCH_BCM_IPROC is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_BITMAIN is not set
# CONFIG_ARCH_BRCMSTB is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SPARX5 is not set
# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_LG1K is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEEMBAY is not set
# CONFIG_ARCH_MEDIATEK is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_REALTEK is not set
# CONFIG_ARCH_RENESAS is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_S32 is not set
# CONFIG_ARCH_SEATTLE is not set
# CONFIG_ARCH_STRATIX10 is not set
# CONFIG_ARCH_SYNQUACER is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_SPRD is not set
# CONFIG_ARCH_THUNDER is not set
# CONFIG_ARCH_THUNDER2 is not set
# CONFIG_ARCH_UNIPHIER is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_VISCONTI is not set
# CONFIG_ARCH_XGENE is not set
# CONFIG_ARCH_ZX is not set
# CONFIG_ARCH_ZYNQMP is not set
# end of Platform selection

#
# Kernel Features
#

#
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
CONFIG_ARM64_ERRATUM_826319=y
CONFIG_ARM64_ERRATUM_827319=y
CONFIG_ARM64_ERRATUM_824069=y
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
# CONFIG_ARM64_ERRATUM_834220 is not set
CONFIG_ARM64_ERRATUM_845719=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_ARM64_ERRATUM_1024718=y
CONFIG_ARM64_ERRATUM_1418040=y
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
CONFIG_ARM64_ERRATUM_1165522=y
CONFIG_ARM64_ERRATUM_1319367=y
CONFIG_ARM64_ERRATUM_1530923=y
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
CONFIG_ARM64_ERRATUM_1286807=y
CONFIG_ARM64_ERRATUM_1463225=y
CONFIG_ARM64_ERRATUM_1542419=y
CONFIG_ARM64_ERRATUM_1508412=y
# CONFIG_CAVIUM_ERRATUM_22375 is not set
# CONFIG_CAVIUM_ERRATUM_23154 is not set
# CONFIG_CAVIUM_ERRATUM_27456 is not set
CONFIG_CAVIUM_ERRATUM_30115=y
# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
CONFIG_FUJITSU_ERRATUM_010001=y
CONFIG_HISILICON_ERRATUM_161600802=y
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
CONFIG_QCOM_FALKOR_ERRATUM_1009=y
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
CONFIG_SOCIONEXT_SYNQUACER_PREITS=y
# end of ARM errata workarounds via the alternatives framework

CONFIG_ARM64_4K_PAGES=y
# CONFIG_ARM64_16K_PAGES is not set
# CONFIG_ARM64_64K_PAGES is not set
# CONFIG_ARM64_VA_BITS_39 is not set
CONFIG_ARM64_VA_BITS_48=y
CONFIG_ARM64_VA_BITS=48
CONFIG_ARM64_PA_BITS_48=y
CONFIG_ARM64_PA_BITS=48
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_SMT is not set
CONFIG_NR_CPUS=256
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NUMA is not set
CONFIG_HOLES_IN_ZONE=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_SIG=y
CONFIG_KEXEC_IMAGE_VERIFY_SIG=y
CONFIG_CRASH_DUMP=y
# CONFIG_XEN is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_UNMAP_KERNEL_AT_EL0=y
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
CONFIG_ARM64_SW_TTBR0_PAN=y
CONFIG_ARM64_TAGGED_ADDR_ABI=y
CONFIG_COMPAT=y
CONFIG_KUSER_HELPERS=y
CONFIG_ARMV8_DEPRECATED=y
CONFIG_SWP_EMULATION=y
CONFIG_CP15_BARRIER_EMULATION=y
CONFIG_SETEND_EMULATION=y

#
# ARMv8.1 architectural features
#
CONFIG_ARM64_HW_AFDBM=y
CONFIG_ARM64_PAN=y
CONFIG_AS_HAS_LSE_ATOMICS=y
CONFIG_ARM64_LSE_ATOMICS=y
CONFIG_ARM64_USE_LSE_ATOMICS=y
CONFIG_ARM64_VHE=y
# end of ARMv8.1 architectural features

#
# ARMv8.2 architectural features
#
CONFIG_ARM64_UAO=y
CONFIG_ARM64_PMEM=y
# CONFIG_ARM64_RAS_EXTN is not set
CONFIG_ARM64_CNP=y
# end of ARMv8.2 architectural features

#
# ARMv8.3 architectural features
#
CONFIG_ARM64_PTR_AUTH=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET=y
CONFIG_CC_HAS_SIGN_RETURN_ADDRESS=y
CONFIG_AS_HAS_PAC=y
CONFIG_AS_HAS_CFI_NEGATE_RA_STATE=y
# end of ARMv8.3 architectural features

#
# ARMv8.4 architectural features
#
CONFIG_ARM64_AMU_EXTN=y
CONFIG_AS_HAS_ARMV8_4=y
CONFIG_ARM64_TLB_RANGE=y
# end of ARMv8.4 architectural features

#
# ARMv8.5 architectural features
#
CONFIG_ARM64_BTI=y
CONFIG_ARM64_BTI_KERNEL=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI=y
CONFIG_ARM64_E0PD=y
CONFIG_ARCH_RANDOM=y
CONFIG_ARM64_AS_HAS_MTE=y
CONFIG_ARM64_MTE=y
# end of ARMv8.5 architectural features

CONFIG_ARM64_SVE=y
CONFIG_ARM64_MODULE_PLTS=y
CONFIG_ARM64_PSEUDO_NMI=y
# CONFIG_ARM64_DEBUG_PRIORITY_MASKING is not set
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
CONFIG_STACKPROTECTOR_PER_TASK=y
# end of Kernel Features

#
# Boot options
#
CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
# CONFIG_CMDLINE_FORCE is not set
CONFIG_EFI_STUB=y
CONFIG_EFI=y
CONFIG_DMI=y
# end of Boot options

CONFIG_SYSVIPC_COMPAT=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y

#
# Power management options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# end of Power management options

#
# CPU Power Management
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_DT_IDLE_STATES=y

#
# ARM CPU Idle Drivers
#
CONFIG_ARM_CPUIDLE=y
# CONFIG_ARM_PSCI_CPUIDLE is not set
# end of ARM CPU Idle Drivers
# end of CPU Idle

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_ARM_SCPI_CPUFREQ=m
CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
# end of CPU Frequency scaling
# end of CPU Power Management

#
# Firmware Drivers
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCPI_PROTOCOL=m
CONFIG_ARM_SCPI_POWER_DOMAIN=m
# CONFIG_ARM_SDE_INTERFACE is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_PARAMS_FROM_FDT=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB=y
CONFIG_EFI_ARMSTUB_DTB_LOADER=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
CONFIG_EFI_BOOTLOADER_CONTROL=m
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support

CONFIG_EFI_EARLYCON=y
CONFIG_ARM_PSCI_FW=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
CONFIG_ARM_SMCCC_SOC_ID=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_ARCH_SUPPORTS_ACPI=y
# CONFIG_ACPI is not set
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
CONFIG_KVM_ARM_PMU=y
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA256_ARM64=m
CONFIG_CRYPTO_SHA512_ARM64=m
CONFIG_CRYPTO_SHA1_ARM64_CE=m
CONFIG_CRYPTO_SHA2_ARM64_CE=m
# CONFIG_CRYPTO_SHA512_ARM64_CE is not set
# CONFIG_CRYPTO_SHA3_ARM64 is not set
# CONFIG_CRYPTO_SM3_ARM64_CE is not set
# CONFIG_CRYPTO_SM4_ARM64_CE is not set
CONFIG_CRYPTO_GHASH_ARM64_CE=m
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64=m
CONFIG_CRYPTO_AES_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64_CE_CCM=m
CONFIG_CRYPTO_AES_ARM64_CE_BLK=m
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_POLY1305_NEON=m
# CONFIG_CRYPTO_NHPOLY1305_NEON is not set
CONFIG_CRYPTO_AES_ARM64_BS=m

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_SET_FS=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_COMPILER_H=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_RELR=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_CMDLINE_PARSER=y
CONFIG_BLK_WBT=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=m
CONFIG_IOSCHED_BFQ=m
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_HAVE_ELF_PROT=y
CONFIG_ARCH_USE_GNU_PROPERTY=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
# CONFIG_ZSWAP_DEFAULT_ON is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_HMM_MIRROR=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options

CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_INTERFACE=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=m
# CONFIG_SMC_DIAG is not set
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=m
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_LOG_NETDEV=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_FLOW_OFFLOAD=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NF_FLOW_TABLE_INET is not set
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_MH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
# CONFIG_NF_FLOW_TABLE_IPV4 is not set
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
# CONFIG_NF_FLOW_TABLE_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
# end of DECnet: Netfilter Configuration

CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_LOG_BRIDGE=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_BPFILTER=y
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
# end of DCCP CCIDs Configuration

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking

CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_8021Q=m
CONFIG_NET_DSA_TAG_AR9331=m
CONFIG_NET_DSA_TAG_BRCM_COMMON=m
CONFIG_NET_DSA_TAG_BRCM=m
CONFIG_NET_DSA_TAG_BRCM_PREPEND=m
CONFIG_NET_DSA_TAG_GSWIP=m
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
CONFIG_NET_DSA_TAG_MTK=m
CONFIG_NET_DSA_TAG_KSZ=m
CONFIG_NET_DSA_TAG_RTL4_A=m
CONFIG_NET_DSA_TAG_OCELOT=m
CONFIG_NET_DSA_TAG_QCA=m
CONFIG_NET_DSA_TAG_LAN9303=m
CONFIG_NET_DSA_TAG_SJA1105=m
CONFIG_NET_DSA_TAG_TRAILER=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_IPDDP is not set
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_PHONET=m
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
# CONFIG_6LOWPAN_GHC_UDP is not set
# CONFIG_6LOWPAN_GHC_ICMPV6 is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_TAPRIO=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_SKBPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_FQ_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_ETS=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_CT=m
CONFIG_NET_ACT_GATE=m
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUGFS is not set
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_SYSFS is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=m
CONFIG_HSR=m
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
CONFIG_QRTR_MHI=m
CONFIG_NET_NCSI=y
# CONFIG_NCSI_OEM_CMD_GET_MAC is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
# end of AX.25 network device drivers

CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
CONFIG_CAN_ISOTP=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_VXCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_FLEXCAN=m
CONFIG_CAN_GRCAN=m
# CONFIG_CAN_KVASER_PCIEFD is not set
# CONFIG_CAN_XILINXCAN is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
CONFIG_CAN_IFI_CANFD=m
CONFIG_CAN_M_CAN=m
# CONFIG_CAN_M_CAN_PLATFORM is not set
# CONFIG_CAN_M_CAN_TCAN4X5X is not set
CONFIG_CAN_PEAK_PCIEFD=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_EMS_PCMCIA is not set
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
# CONFIG_CAN_PEAK_PCMCIA is not set
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m
# CONFIG_CAN_SOFTING_CS is not set

#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=m
CONFIG_CAN_MCP251X=m
CONFIG_CAN_MCP251XFD=m
# CONFIG_CAN_MCP251XFD_SANITY is not set
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_MCBA_USB=m
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_UCAN=m
# end of CAN USB interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers

CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
# CONFIG_BT_HS is not set
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=m
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_QCA=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_MTKSDIO=m
CONFIG_BT_MTKUART=m
CONFIG_BT_HCIRSI=m
# end of Bluetooth device drivers

CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_IPV6=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
CONFIG_NFC_FDP=m
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN532_UART=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
CONFIG_NFC_MRVL_UART=m
CONFIG_NFC_MRVL_I2C=m
CONFIG_NFC_MRVL_SPI=m
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
CONFIG_NFC_ST_NCI_SPI=m
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
CONFIG_NFC_ST95HF=m
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCIE_XILINX=y
# CONFIG_PCI_XGENE is not set
# CONFIG_PCIE_ALTERA is not set
# CONFIG_PCI_HOST_THUNDER_PEM is not set
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
CONFIG_PCIE_BRCMSTB=y

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_HISI is not set
# CONFIG_PCIE_KIRIN is not set
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_AL is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_FW_LOADER_COMPRESS=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_I3C=m
CONFIG_REGMAP_SPI_AVMM=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_ARM_CCI=y
CONFIG_ARM_CCI400_COMMON=y
CONFIG_BRCMSTB_GISB_ARB=y
# CONFIG_MOXTET is not set
# CONFIG_SIMPLE_PM_BUS is not set
# CONFIG_VEXPRESS_CONFIG is not set
CONFIG_MHI_BUS=m
# CONFIG_MHI_BUS_DEBUG is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_GNSS=m
CONFIG_GNSS_SERIAL=m
CONFIG_GNSS_MTK_SERIAL=m
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_OF_PARTS=m
CONFIG_MTD_AFS_PARTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_PSTORE=m
CONFIG_MTD_SWAP=m
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
CONFIG_MTD_PCI=m
# CONFIG_MTD_PCMCIA is not set
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_MCHP23K256=m
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=m
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
CONFIG_MTD_RAW_NAND=m
CONFIG_MTD_NAND_ECC_SW_BCH=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_PCI=m
CONFIG_MTD_NAND_DENALI_DT=m
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_BRCMNAND=m
# CONFIG_MTD_NAND_MXIC is not set
CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_NAND_CADENCE=m
CONFIG_MTD_NAND_ARASAN=m

#
# Misc
#
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_SPI_NAND=m

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_HYPERBUS is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_PARPORT=m
CONFIG_PARPORT_AX88796=m
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_CDROM=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
CONFIG_ZRAM_WRITEBACK=y
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=256
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SKD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_RSXX=m
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=m
CONFIG_BLK_DEV_RNBD_SERVER=m

#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
# CONFIG_NVME_MULTIPATH is not set
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
CONFIG_NVME_TCP=m
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
# CONFIG_NVME_TARGET_FCLOOP is not set
CONFIG_NVME_TARGET_TCP=m
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_AD525X_DPOT_SPI=m
CONFIG_DUMMY_IRQ=m
CONFIG_PHANTOM=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_XILINX_SDFEC=m
CONFIG_MISC_RTSX=m
CONFIG_PVPANIC=m
CONFIG_HISI_HIKEY_USB=m
CONFIG_C2PORT=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=m
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=m
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_SPI=m
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=m
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=m
CONFIG_HABANA_AI=m
CONFIG_UACCE=m
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_HISI_SAS=m
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
# CONFIG_SCSI_UFSHCD_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_CDNS_PLATFORM=m
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_CRYPTO=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
# CONFIG_FCOE is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_FDOMAIN=m
CONFIG_SCSI_FDOMAIN_PCI=m
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support

CONFIG_HAVE_PATA_PLATFORM=y
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_CEVA=m
CONFIG_AHCI_QORIQ=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_DWC=m
CONFIG_SATA_DWC_OLD_DMA=y
# CONFIG_SATA_DWC_DEBUG is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PLATFORM=m
CONFIG_PATA_OF_PLATFORM=m
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
CONFIG_DM_EBS=m
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_MULTIPATH_HST=m
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_ZONED=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not set
CONFIG_EQUALIZER=m
# CONFIG_NET_FC is not set
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_BAREUDP=m
CONFIG_GTP=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NET_VRF=m
CONFIG_VSOCKMON=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_CAIF_DRIVERS=y
CONFIG_CAIF_TTY=m
CONFIG_CAIF_HSI=m
CONFIG_CAIF_VIRTIO=m

#
# Distributed Switch Architecture drivers
#
CONFIG_B53=m
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
CONFIG_B53_SERDES=m
CONFIG_NET_DSA_BCM_SF2=m
CONFIG_NET_DSA_LOOP=m
CONFIG_NET_DSA_LANTIQ_GSWIP=m
CONFIG_NET_DSA_MT7530=m
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m
CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
# CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C is not set
CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m
# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MSCC_FELIX=m
CONFIG_NET_DSA_MSCC_SEVILLE=m
CONFIG_NET_DSA_AR9331=m
CONFIG_NET_DSA_SJA1105=m
CONFIG_NET_DSA_SJA1105_PTP=y
# CONFIG_NET_DSA_SJA1105_TAS is not set
CONFIG_NET_DSA_QCA8K=m
CONFIG_NET_DSA_REALTEK_SMI=m
CONFIG_NET_DSA_SMSC_LAN9303=m
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
CONFIG_NET_DSA_VITESSE_VSC73XX=m
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
CONFIG_ALTERA_TSE=m
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_PCMCIA_NMCLAN=m
CONFIG_AMD_XGBE=m
# CONFIG_AMD_XGBE_DCB is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_AURORA=y
CONFIG_AURORA_NB8800=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCMGENET=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
CONFIG_SYSTEMPORT=m
# CONFIG_BNXT is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
# CONFIG_MACB_PCI is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_CAVIUM_PTP is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
CONFIG_DNET=m
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=m
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FSL_PQ_MDIO=m
CONFIG_FSL_XGMAC_MDIO=m
CONFIG_GIANFAR=m
CONFIG_FSL_ENETC=m
CONFIG_FSL_ENETC_VF=m
CONFIG_FSL_ENETC_MDIO=m
CONFIG_FSL_ENETC_PTP_CLOCK=m
CONFIG_FSL_ENETC_QOS=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_GVE=m
CONFIG_NET_VENDOR_HISILICON=y
CONFIG_HIX5HD2_GMAC=m
CONFIG_HISI_FEMAC=m
CONFIG_HIP04_ETH=m
CONFIG_HI13X1_GMAC=y
CONFIG_HNS_MDIO=m
CONFIG_HNS=m
CONFIG_HNS_DSAF=m
CONFIG_HNS_ENET=m
# CONFIG_HNS3 is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_OCTEONTX2_MBOX=m
# CONFIG_OCTEONTX2_AF is not set
CONFIG_OCTEONTX2_PF=m
CONFIG_OCTEONTX2_VF=m
CONFIG_PRESTERA=m
CONFIG_PRESTERA_PCI=m
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
CONFIG_MLXSW_CORE=m
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
# CONFIG_MLXSW_PCI is not set
CONFIG_MLXSW_I2C=m
CONFIG_MLXSW_MINIMAL=m
CONFIG_MLXFW=m
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ENCX24J600=m
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=m
CONFIG_MSCC_OCELOT_SWITCH=m
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
# CONFIG_NET_VENDOR_NETERION is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=m
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
# CONFIG_NE2K_PCI is not set
CONFIG_PCMCIA_PCNET=m
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
CONFIG_ETHOC=m
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=m
CONFIG_QCA7000_SPI=m
CONFIG_QCA7000_UART=m
CONFIG_QCOM_EMAC=m
CONFIG_RMNET=m
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=m
CONFIG_PCMCIA_SMC91C92=m
# CONFIG_EPIC100 is not set
CONFIG_SMSC911X=m
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_SELFTESTS is not set
CONFIG_STMMAC_PLATFORM=m
CONFIG_DWMAC_DWC_QOS_ETH=m
CONFIG_DWMAC_GENERIC=m
CONFIG_DWMAC_INTEL_PLAT=m
# CONFIG_STMMAC_PCI is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=m
# CONFIG_DWC_XLGMAC_PCI is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=m
# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLINK=m
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SFP=m

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_ADIN_PHY is not set
CONFIG_AQUANTIA_PHY=m
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=y
CONFIG_BCM54140_PHY=m
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM84881_PHY=m
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=y
CONFIG_CICADA_PHY=m
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_LXT_PHY=m
CONFIG_INTEL_XWAY_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_PHY=y
CONFIG_MICROCHIP_T1_PHY=m
CONFIG_MICROSEMI_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_NXP_TJA11XX_PHY=m
CONFIG_AT803X_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_RENESAS_PHY=m
CONFIG_ROCKCHIP_PHY=m
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=m
CONFIG_TERANETICS_PHY=m
CONFIG_DP83822_PHY=m
CONFIG_DP83TC811_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
CONFIG_DP83869_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=m
CONFIG_MICREL_KS8995MA=m
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_CAVIUM=m
CONFIG_MDIO_GPIO=m
CONFIG_MDIO_HISI_FEMAC=m
CONFIG_MDIO_I2C=m
CONFIG_MDIO_MVUSB=m
CONFIG_MDIO_MSCC_MIIM=m
CONFIG_MDIO_OCTEON=m
CONFIG_MDIO_IPQ4019=m
CONFIG_MDIO_IPQ8064=m
# CONFIG_MDIO_THUNDER is not set

#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=m
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=m
CONFIG_MDIO_BUS_MUX_MMIOREG=m

#
# PCS device drivers
#
CONFIG_PCS_XPCS=m
CONFIG_PCS_LYNX=m
# end of PCS device drivers

CONFIG_PLIP=m
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_USB_NET_AQC111=m
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_PCI is not set
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
# CONFIG_ATH9K_DYNACK is not set
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=m
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_ATH9K_HWRNG=y
CONFIG_ATH9K_COMMON_SPECTRAL=y
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
# CONFIG_CARL9170_DEBUGFS is not set
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_ATH6KL_TRACING is not set
CONFIG_AR5523=m
# CONFIG_WIL6210 is not set
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
# CONFIG_ATH10K_PCI is not set
CONFIG_ATH10K_SDIO=m
CONFIG_ATH10K_USB=m
# CONFIG_ATH10K_DEBUG is not set
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_SPECTRAL=y
CONFIG_ATH10K_TRACING=y
CONFIG_WCN36XX=m
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_ATH11K=m
CONFIG_ATH11K_AHB=m
CONFIG_ATH11K_PCI=m
# CONFIG_ATH11K_DEBUG is not set
# CONFIG_ATH11K_DEBUGFS is not set
# CONFIG_ATH11K_TRACING is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_SDIO is not set
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
# CONFIG_BRCM_TRACING is not set
CONFIG_BRCMDBG=y
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO_CS is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set

#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
# end of Debugging Options

CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HOSTAP_PCI is not set
# CONFIG_HOSTAP_CS is not set
# CONFIG_HERMES is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
# CONFIG_P54_PCI is not set
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_CS is not set
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
# CONFIG_MWIFIEX_PCIE is not set
CONFIG_MWIFIEX_USB=m
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=m
CONFIG_MT76_SDIO=m
CONFIG_MT76x02_LIB=m
CONFIG_MT76x02_USB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0U=m
# CONFIG_MT76x0E is not set
CONFIG_MT76x2_COMMON=m
# CONFIG_MT76x2E is not set
CONFIG_MT76x2U=m
# CONFIG_MT7603E is not set
CONFIG_MT7615_COMMON=m
# CONFIG_MT7615E is not set
CONFIG_MT7663_USB_SDIO_COMMON=m
CONFIG_MT7663U=m
CONFIG_MT7663S=m
CONFIG_MT7915E=m
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=m
CONFIG_WILC1000_SDIO=m
CONFIG_WILC1000_SPI=m
CONFIG_WILC1000_HW_OOB_INTR=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
# CONFIG_RT2800PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8XXXU=m
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=m
CONFIG_RTW88_CORE=m
CONFIG_RTW88_PCI=m
CONFIG_RTW88_8821C=m
# CONFIG_RTW88_8822BE is not set
# CONFIG_RTW88_8822CE is not set
# CONFIG_RTW88_8723DE is not set
CONFIG_RTW88_8821CE=m
CONFIG_RTW88_DEBUG=y
CONFIG_RTW88_DEBUGFS=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=m
CONFIG_RSI_USB=m
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_CW1200_WLAN_SPI=m
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SPI=m
CONFIG_WLCORE_SDIO=m
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_PCMCIA_RAYCS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_MAC80211_HWSIM=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_VIRT_WIFI=m

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# end of WiMAX Wireless Broadband devices

CONFIG_WAN=y
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
CONFIG_FSL_UCC_HDLC=m
# CONFIG_DLCI is not set
CONFIG_LAPBETHER=m
# CONFIG_X25_ASY is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_AT86RF230_DEBUGFS=y
CONFIG_IEEE802154_MRF24J40=m
CONFIG_IEEE802154_CC2520=m
CONFIG_IEEE802154_ATUSB=m
CONFIG_IEEE802154_ADF7242=m
CONFIG_IEEE802154_CA8210=m
CONFIG_IEEE802154_CA8210_DEBUGFS=y
CONFIG_IEEE802154_MCR20A=m
CONFIG_IEEE802154_HWSIM=m
# CONFIG_VMXNET3 is not set
CONFIG_USB4_NET=m
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
# CONFIG_MISDN_HFCPCI is not set
# CONFIG_MISDN_HFCMULTI is not set
CONFIG_MISDN_HFCUSB=m
# CONFIG_MISDN_AVMFRITZ is not set
# CONFIG_MISDN_SPEEDFAX is not set
# CONFIG_MISDN_INFINEON is not set
# CONFIG_MISDN_W6692 is not set
# CONFIG_MISDN_NETJET is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_ADP5520=m
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=m
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
CONFIG_KEYBOARD_DLINK_DIR685=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_STMPE=m
CONFIG_KEYBOARD_IQS62X=m
CONFIG_KEYBOARD_OMAP4=m
CONFIG_KEYBOARD_TC3589X=m
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
CONFIG_KEYBOARD_TWL4030=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_KEYBOARD_CAP11XX=m
CONFIG_KEYBOARD_BCM=m
CONFIG_KEYBOARD_MTK_PMIC=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADC=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=m
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_JOYSTICK_PSXPAD_SPI=m
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=m
# CONFIG_JOYSTICK_FSIA6B is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_88PM860X=m
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_AR1021_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_BU21029=m
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
CONFIG_TOUCHSCREEN_CY8CTMA140=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m
CONFIG_TOUCHSCREEN_DA9034=m
CONFIG_TOUCHSCREEN_DA9052=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
CONFIG_TOUCHSCREEN_EXC3000=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_HIDEEP=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_S6SY761=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_IMX6UL_TSC=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_WM831X=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_PCAP=m
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMFTS=m
CONFIG_TOUCHSCREEN_STMPE=m
CONFIG_TOUCHSCREEN_SUR40=m
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_TOUCHSCREEN_ZET6223=m
CONFIG_TOUCHSCREEN_ZFORCE=m
CONFIG_TOUCHSCREEN_COLIBRI_VF50=m
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_TOUCHSCREEN_IQS5XX=m
CONFIG_TOUCHSCREEN_ZINITIX=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=m
CONFIG_INPUT_88PM80X_ONKEY=m
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_ARIZONA_HAPTICS=m
CONFIG_INPUT_ATMEL_CAPTOUCH=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=m
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MAX8925_ONKEY=m
CONFIG_INPUT_MAX8997_HAPTIC=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_GPIO_BEEPER=m
CONFIG_INPUT_GPIO_DECODER=m
CONFIG_INPUT_GPIO_VIBRA=m
CONFIG_INPUT_CPCAP_PWRBUTTON=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_REGULATOR_HAPTIC=m
CONFIG_INPUT_RETU_PWRBUTTON=m
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
CONFIG_INPUT_TWL6040_VIBRA=m
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PALMAS_PWRBUTTON=m
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_PWM_VIBRA=m
CONFIG_INPUT_RK805_PWRKEY=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_DA9055_ONKEY=m
CONFIG_INPUT_DA9063_ONKEY=m
CONFIG_INPUT_WM831X_ON=m
CONFIG_INPUT_PCAP=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
CONFIG_INPUT_IMS_PCU=m
CONFIG_INPUT_IQS269A=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_DRV260X_HAPTICS=m
CONFIG_INPUT_DRV2665_HAPTICS=m
CONFIG_INPUT_DRV2667_HAPTICS=m
# CONFIG_INPUT_RAVE_SP_PWRBUTTON is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_AMBAKMI=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
CONFIG_SERIO_APBPS2=m
CONFIG_SERIO_GPIO_PS2=m
CONFIG_USERIO=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_MEN_MCB=m
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=0
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_ASPEED_VUART=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_DW=m
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=m
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y
CONFIG_SERIAL_KGDB_NMI=y
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SIFIVE=m
CONFIG_SERIAL_QE=m
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=m
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_XILINX_PS_UART=m
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=m
CONFIG_SERIAL_MEN_Z135=m
CONFIG_SERIAL_SPRD=m
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_NOZOMI is not set
CONFIG_NULL_TTY=m
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_DCC is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CAVIUM is not set
CONFIG_HW_RANDOM_CCTRNG=m
CONFIG_HW_RANDOM_XIPHERA=m
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
CONFIG_SCR24X=m
# CONFIG_IPWIRELESS is not set
# end of PCMCIA character devices

CONFIG_DEVMEM=y
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_VTPM_PROXY=m
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_TCG_TIS_ST33ZP24_SPI=m
CONFIG_XILLYBUS=m
# CONFIG_XILLYBUS_PCIE is not set
CONFIG_XILLYBUS_OF=m
# end of Character devices

CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_DEMUX_PINCTRL=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_BCM2835=y
CONFIG_I2C_BRCMSTB=m
# CONFIG_I2C_CADENCE is not set
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EMEV2=m
CONFIG_I2C_GPIO=m
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_NOMADIK=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_RK3X=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_THUNDERX is not set
CONFIG_I2C_XILINX=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_DLN2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=m
# CONFIG_I2C_FSI is not set
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
# CONFIG_I2C_SLAVE_TESTUNIT is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

CONFIG_I3C=m
# CONFIG_CDNS_I3C_MASTER is not set
# CONFIG_DW_I3C_MASTER is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_AXI_SPI_ENGINE=m
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
CONFIG_SPI_CADENCE_QUADSPI=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_DMA=y
# CONFIG_SPI_DW_PCI is not set
CONFIG_SPI_DW_MMIO=m
CONFIG_SPI_DLN2=m
CONFIG_SPI_FSI=m
# CONFIG_SPI_NXP_FLEXSPI is not set
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_OC_TINY=m
CONFIG_SPI_PL022=m
# CONFIG_SPI_PXA2XX is not set
CONFIG_SPI_ROCKCHIP=m
CONFIG_SPI_SC18IS602=m
# CONFIG_SPI_SIFIVE is not set
CONFIG_SPI_MXIC=m
# CONFIG_SPI_THUNDERX is not set
CONFIG_SPI_XCOMM=m
# CONFIG_SPI_XILINX is not set
CONFIG_SPI_ZYNQMP_GQSPI=m
CONFIG_SPI_AMD=m

#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=m

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=m
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=m
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=m
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_QORIQ=m
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_INES=m
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=m
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AXP209 is not set
CONFIG_PINCTRL_DA9062=m
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08_SPI=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_SX150X=y
# CONFIG_PINCTRL_STMFX is not set
CONFIG_PINCTRL_MAX77620=m
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_RK805=m
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_BCM2835=y

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_MADERA=m
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L92=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=m
CONFIG_GPIO_ALTERA=m
CONFIG_GPIO_RASPBERRYPI_EXP=y
# CONFIG_GPIO_CADENCE is not set
CONFIG_GPIO_DWAPB=m
# CONFIG_GPIO_FTGPIO010 is not set
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_GRGPIO=m
# CONFIG_GPIO_HLWD is not set
CONFIG_GPIO_LOGICVC=m
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_PL061=y
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
CONFIG_GPIO_SIFIVE=y
# CONFIG_GPIO_SIOX is not set
CONFIG_GPIO_SYSCON=m
CONFIG_GPIO_WCD934X=m
# CONFIG_GPIO_XGENE is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_ADNP=m
# CONFIG_GPIO_GW_PLD is not set
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_TPIC2810=m
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD70528=m
CONFIG_GPIO_BD71828=m
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_DA9052=m
CONFIG_GPIO_DA9055=m
CONFIG_GPIO_DLN2=m
CONFIG_GPIO_KEMPLD=m
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
# CONFIG_GPIO_LP87565 is not set
# CONFIG_GPIO_MADERA is not set
CONFIG_GPIO_MAX77620=m
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS65218=m
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=m
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_TWL6040=m
CONFIG_GPIO_UCB1400=m
CONFIG_GPIO_WM831X=m
CONFIG_GPIO_WM8350=m
CONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=m
CONFIG_GPIO_MAX3191X=m
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_PISOSR=m
CONFIG_GPIO_XRA1403=m
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders

CONFIG_GPIO_AGGREGATOR=m
CONFIG_GPIO_MOCKUP=m
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves

CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
# CONFIG_POWER_RESET_BRCMSTB is not set
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_RESTART=y
# CONFIG_POWER_RESET_XGENE is not set
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_REBOOT_MODE=m
CONFIG_SYSCON_REBOOT_MODE=m
CONFIG_NVMEM_REBOOT_MODE=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=m
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_MAX8925_POWER=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_88PM860X=m
CONFIG_CHARGER_ADP5061=m
CONFIG_BATTERY_ACT8945A=m
CONFIG_BATTERY_CPCAP=m
CONFIG_BATTERY_CW2015=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=m
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_DA9052=m
CONFIG_CHARGER_DA9150=m
CONFIG_BATTERY_DA9150=m
CONFIG_CHARGER_AXP20X=m
CONFIG_BATTERY_AXP20X=m
CONFIG_AXP20X_POWER=m
CONFIG_AXP288_FUEL_GAUGE=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_BATTERY_MAX1721X=m
CONFIG_BATTERY_TWL4030_MADC=m
CONFIG_CHARGER_88PM860X=m
CONFIG_CHARGER_PCF50633=m
CONFIG_BATTERY_RX51=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_TWL4030=m
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_LP8788=m
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_DETECTOR_MAX14656=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX8997=m
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_MP2629=m
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_BQ25980=m
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65090=m
CONFIG_CHARGER_TPS65217=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_RT5033=m
CONFIG_CHARGER_RT9455=m
CONFIG_CHARGER_CROS_USBPD=m
# CONFIG_CHARGER_UCS1002 is not set
# CONFIG_CHARGER_BD70528 is not set
CONFIG_CHARGER_BD99954=m
CONFIG_RN5T618_POWER=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1177=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_ARM_SCPI=m
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_CORSAIR_CPRO=m
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_GSC=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=m
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31722=m
CONFIG_SENSORS_MAX31730=m
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_MR75203=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_NPCM7XX=m
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_BEL_PFE=m
CONFIG_SENSORS_IBM_CFFPS=m
# CONFIG_SENSORS_INSPUR_IPSPS is not set
CONFIG_SENSORS_IR35221=m
# CONFIG_SENSORS_IR38064 is not set
CONFIG_SENSORS_IRPS5401=m
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31785=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MP2975=m
CONFIG_SENSORS_PXE1610=m
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_XDPE122=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
CONFIG_SENSORS_SHTC1=m
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_TMP513=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83773G=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=m
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_FREQ_THERMAL=y
CONFIG_CPU_IDLE_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
# CONFIG_THERMAL_MMIO is not set
CONFIG_MAX77620_THERMAL=m
CONFIG_DA9062_THERMAL=m

#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=y
CONFIG_BCM2835_THERMAL=y
# end of Broadcom thermal drivers

CONFIG_GENERIC_ADC_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=m
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_BD70528_WATCHDOG=m
CONFIG_DA9052_WATCHDOG=m
CONFIG_DA9055_WATCHDOG=m
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=m
CONFIG_GPIO_WATCHDOG=m
CONFIG_MENF21BMC_WATCHDOG=m
CONFIG_MENZ069_WATCHDOG=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_WM8350_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=m
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_RAVE_SP_WATCHDOG=m
CONFIG_ARM_SP805_WATCHDOG=m
# CONFIG_ARM_SBSA_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=m
CONFIG_DW_WATCHDOG=m
CONFIG_RN5T618_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=m
CONFIG_MAX77620_WATCHDOG=m
CONFIG_RETU_WATCHDOG=m
CONFIG_ARM_SMC_WATCHDOG=m
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_KEMPLD_WDT=m
CONFIG_BCM2835_WDT=y
CONFIG_MEN_A21_WDT=m

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=m
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=m
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
CONFIG_MFD_CROS_EC_DEV=m
CONFIG_MFD_MADERA=m
# CONFIG_MFD_MADERA_I2C is not set
CONFIG_MFD_MADERA_SPI=m
CONFIG_MFD_CS47L15=y
# CONFIG_MFD_CS47L35 is not set
# CONFIG_MFD_CS47L85 is not set
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=m
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=m
CONFIG_MFD_DLN2=m
CONFIG_MFD_GATEWORKS_GSC=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=m
CONFIG_MFD_HI6421_PMIC=m
CONFIG_HTC_PASIC3=m
CONFIG_HTC_I2CPLD=y
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
CONFIG_MFD_IQS62X=m
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=m
CONFIG_MFD_88PM800=m
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=m
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=m
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=m
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_UCB1400_CORE=m
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RT5033=m
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=m
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=m
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=m
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# end of STMicroelectronics STMPE Interface Drivers

CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=m
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=m
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TI_LP87565=m
CONFIG_MFD_TPS65218=m
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_ARIZONA_SPI=m
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=m
# CONFIG_MFD_ROHM_BD718XX is not set
CONFIG_MFD_ROHM_BD70528=m
CONFIG_MFD_ROHM_BD71828=m
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
CONFIG_MFD_WCD934X=m
CONFIG_RAVE_SP_CORE=m
CONFIG_MFD_INTEL_M10_BMC=m
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_88PM8607=m
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_ACT8945A=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_AAT2870=m
CONFIG_REGULATOR_AB3100=m
CONFIG_REGULATOR_ARIZONA_LDO1=m
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
CONFIG_REGULATOR_AS3711=m
CONFIG_REGULATOR_AS3722=m
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_BD70528=m
CONFIG_REGULATOR_BD71828=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_CPCAP=m
CONFIG_REGULATOR_CROS_EC=m
CONFIG_REGULATOR_DA903X=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_DA9055=m
CONFIG_REGULATOR_DA9062=m
CONFIG_REGULATOR_DA9063=m
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_FAN53880=m
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=m
CONFIG_REGULATOR_HI6421V530=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP873X=m
CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_LP87565 is not set
CONFIG_REGULATOR_LP8788=m
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX14577=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX77620=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8925=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=m
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MAX8998=m
CONFIG_REGULATOR_MAX77686=m
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_MAX77826=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
# CONFIG_REGULATOR_MCP16502 is not set
CONFIG_REGULATOR_MP5416=m
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MP886X=m
CONFIG_REGULATOR_MPQ7920=m
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6323=m
CONFIG_REGULATOR_MT6358=m
CONFIG_REGULATOR_MT6360=m
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PALMAS=m
CONFIG_REGULATOR_PCA9450=m
CONFIG_REGULATOR_PCAP=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
CONFIG_REGULATOR_PV88090=m
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_QCOM_USB_VBUS=m
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=m
CONFIG_REGULATOR_RC5T583=m
CONFIG_REGULATOR_RK808=m
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_ROHM=m
CONFIG_REGULATOR_RT4801=m
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_RTMV20=m
CONFIG_REGULATOR_S2MPA01=m
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_SKY81452=m
CONFIG_REGULATOR_SLG51000=m
# CONFIG_REGULATOR_SY8106A is not set
# CONFIG_REGULATOR_SY8824X is not set
CONFIG_REGULATOR_SY8827N=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65086=m
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_TPS65218=m
CONFIG_REGULATOR_TPS6524X=m
CONFIG_REGULATOR_TPS6586X=m
CONFIG_REGULATOR_TPS65910=m
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TPS80031=m
CONFIG_REGULATOR_TWL4030=m
CONFIG_REGULATOR_VCTRL=m
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8350=m
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_WM8994=m
CONFIG_REGULATOR_QCOM_LABIBB=m
CONFIG_RC_CORE=y
CONFIG_RC_MAP=m
CONFIG_LIRC=y
# CONFIG_BPF_LIRC_MODE2 is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_IR_IMON_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_HIX5HD2=m
CONFIG_IR_IMON=m
CONFIG_IR_IMON_RAW=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
# CONFIG_IR_SPI is not set
CONFIG_IR_STREAMZAP=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_IR_GPIO_TX=m
CONFIG_IR_PWM_TX=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SIR=m
CONFIG_RC_XBOX_DVD=m
CONFIG_IR_TOY=m
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y
CONFIG_MEDIA_CEC_RC=y
# CONFIG_CEC_PIN_ERROR_INJ is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
CONFIG_CEC_CROS_EC=m
CONFIG_CEC_GPIO=m
CONFIG_USB_PULSE8_CEC=m
CONFIG_USB_RAINSHADOW_CEC=m
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FLASH_LED_CLASS=m
CONFIG_V4L2_FWNODE=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_VMALLOC=m
# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y

#
# Please notice that the enabled Media controller Request API is EXPERIMENTAL
#
# end of Media controller options

#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#
CONFIG_TTPCI_EEPROM=m
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_ZD1301=m
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_AS102=m

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m

#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m
CONFIG_USB_MSI2500=m
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI476X=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
# CONFIG_RADIO_MAXIRADIO is not set
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
CONFIG_RADIO_WL128X=m
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
CONFIG_SMS_SIANO_DEBUGFS=y
CONFIG_VIDEO_V4L2_TPG=m
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_VIDEO_CADENCE=y
CONFIG_VIDEO_CADENCE_CSI2RX=m
CONFIG_VIDEO_CADENCE_CSI2TX=m
CONFIG_VIDEO_ASPEED=m
CONFIG_VIDEO_MUX=m
CONFIG_VIDEO_XILINX=m
CONFIG_VIDEO_XILINX_CSI2RXSS=m
CONFIG_VIDEO_XILINX_TPG=m
CONFIG_VIDEO_XILINX_VTC=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIMC=m
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_VIDEO_VIM2M=m
CONFIG_VIDEO_VICODEC=m
# CONFIG_DVB_TEST_DRIVERS is not set
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y

#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA1997X=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SONY_BTF_MPX=m
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV748X is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_ML86V7667 is not set
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
CONFIG_VIDEO_TC358743_CEC=y
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_TVP7002 is not set
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_MAX9286=m

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
CONFIG_VIDEO_CX25840=m
# end of Video decoders

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips

#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_ST_MIPID02 is not set
# end of Miscellaneous helper chips

#
# Camera sensor devices
#
CONFIG_VIDEO_HI556=m
# CONFIG_VIDEO_IMX214 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
CONFIG_VIDEO_IMX290=m
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX355 is not set
CONFIG_VIDEO_OV2640=m
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV5640 is not set
# CONFIG_VIDEO_OV5645 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV772X is not set
CONFIG_VIDEO_OV7640=m
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M032 is not set
CONFIG_VIDEO_MT9M111=m
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
CONFIG_VIDEO_MT9V011=m
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
CONFIG_VIDEO_RDACM20=m
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_SMIAPP is not set
# CONFIG_VIDEO_ET8EK8 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# end of Camera sensor devices

#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
CONFIG_VIDEO_DW9768=m
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices

#
# SPI helper chips
#
# CONFIG_VIDEO_GS1662 is not set
# end of SPI helper chips

#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
# CONFIG_MEDIA_TUNER_MT2131 is not set
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
# CONFIG_MEDIA_TUNER_MXL301RF is not set
CONFIG_MEDIA_TUNER_QM1D1C0042=m
# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
# CONFIG_DVB_STV0910 is not set
CONFIG_DVB_STV6110x=m
# CONFIG_DVB_STV6111 is not set
# CONFIG_DVB_MXL5XX is not set
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
# CONFIG_DVB_ZL10036 is not set
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
# CONFIG_DVB_TDA8083 is not set
CONFIG_DVB_TDA10086=m
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
# CONFIG_DVB_TUA6100 is not set
CONFIG_DVB_CX24116=m
# CONFIG_DVB_CX24117 is not set
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
CONFIG_DVB_CX22702=m
# CONFIG_DVB_S5H1432 is not set
CONFIG_DVB_DRXD=m
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
# CONFIG_DVB_STV0367 is not set
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_GP8PSK_FE=m
CONFIG_DVB_CXD2880=m

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
# CONFIG_DVB_MN88443X is not set

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
# CONFIG_DVB_LNBH25 is not set
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
# CONFIG_DVB_ISL6405 is not set
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
# CONFIG_DVB_TDA665x is not set
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
# CONFIG_DVB_HORUS3A is not set
# CONFIG_DVB_ASCOT2E is not set
# CONFIG_DVB_HELENE is not set

#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers

#
# Graphics support
#
# CONFIG_VGA_ARB is not set
CONFIG_DRM=m
CONFIG_DRM_MIPI_DBI=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_I2C_NXP_TDA9950=m
# end of I2C encoder or helper chips

#
# ARM devices
#
CONFIG_DRM_HDLCD=m
# CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set
CONFIG_DRM_MALI_DISPLAY=m
# CONFIG_DRM_KOMEDA is not set
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_VGEM=m
CONFIG_DRM_VKMS=m
CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_RCAR_DW_HDMI=m
# CONFIG_DRM_RCAR_LVDS is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=m
CONFIG_DRM_PANEL_BOE_HIMAX8279D=m
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
CONFIG_DRM_PANEL_LVDS=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_PANEL_ELIDA_KD35T133=m
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=m
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=m
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=m
CONFIG_DRM_PANEL_JDI_LT070ME05000=m
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=m
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=m
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=m
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
CONFIG_DRM_PANEL_LG_LG4573=m
# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
CONFIG_DRM_PANEL_NOVATEK_NT35510=m
# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
CONFIG_DRM_PANEL_RONBO_RB070D30=m
# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=m
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SITRONIX_ST7701=m
CONFIG_DRM_PANEL_SITRONIX_ST7703=m
CONFIG_DRM_PANEL_SITRONIX_ST7789V=m
CONFIG_DRM_PANEL_SONY_ACX424AKP=m
# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
CONFIG_DRM_PANEL_TPO_TPG110=m
# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
CONFIG_DRM_PANEL_VISIONOX_RM69299=m
CONFIG_DRM_PANEL_XINPENG_XPP055C272=m
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
CONFIG_DRM_CHRONTEL_CH7033=m
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_DRM_LONTIUM_LT9611=m
CONFIG_DRM_LVDS_CODEC=m
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=m
CONFIG_DRM_NWL_MIPI_DSI=m
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
CONFIG_DRM_PARADE_PS8640=m
CONFIG_DRM_SIL_SII8620=m
CONFIG_DRM_SII902X=m
CONFIG_DRM_SII9234=m
CONFIG_DRM_SIMPLE_BRIDGE=m
# CONFIG_DRM_THINE_THC63LVD1024 is not set
CONFIG_DRM_TOSHIBA_TC358762=m
# CONFIG_DRM_TOSHIBA_TC358764 is not set
CONFIG_DRM_TOSHIBA_TC358767=m
CONFIG_DRM_TOSHIBA_TC358768=m
CONFIG_DRM_TOSHIBA_TC358775=m
CONFIG_DRM_TI_TFP410=m
# CONFIG_DRM_TI_SN65DSI86 is not set
CONFIG_DRM_TI_TPD12S015=m
CONFIG_DRM_ANALOGIX_ANX6345=m
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_ANALOGIX_DP=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7511_CEC=y
CONFIG_DRM_CDNS_MHDP8546=m
CONFIG_DRM_DW_HDMI=m
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=m
# end of Display Interface Bridges

CONFIG_DRM_VC4=m
CONFIG_DRM_VC4_HDMI_CEC=y
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_ARCPGU=m
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_HISI_KIRIN is not set
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=m
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
CONFIG_TINYDRM_HX8357D=m
CONFIG_TINYDRM_ILI9225=m
CONFIG_TINYDRM_ILI9341=m
CONFIG_TINYDRM_ILI9486=m
CONFIG_TINYDRM_MI0283QT=m
CONFIG_TINYDRM_REPAPER=m
CONFIG_TINYDRM_ST7586=m
CONFIG_TINYDRM_ST7735R=m
CONFIG_DRM_PL111=m
CONFIG_DRM_LIMA=m
CONFIG_DRM_PANFROST=m
CONFIG_DRM_TIDSS=m
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_BACKLIGHT=m
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_ARMCLCD=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_UVESA=m
CONFIG_FB_EFI=y
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_SM501=m
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
# CONFIG_FB_MB862XX is not set
CONFIG_FB_SIMPLE=y
CONFIG_FB_SSD1307=m
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=m
CONFIG_LCD_HX8357=m
CONFIG_LCD_OTM3225A=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=m
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_DA903X=m
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_MAX8925=m
CONFIG_BACKLIGHT_QCOM_WLED=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_AAT2870=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_LP8788=m
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_SKY81452=m
CONFIG_BACKLIGHT_TPS65217=m
CONFIG_BACKLIGHT_AS3711=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
CONFIG_BACKLIGHT_ARCXCNN=m
# CONFIG_BACKLIGHT_RAVE_SP is not set
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support

CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_PCI is not set

#
# HD-Audio
#
# end of HD-Audio

CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
CONFIG_SND_ATMEL_SOC=m
# CONFIG_SND_SOC_MIKROE_PROTO is not set
CONFIG_SND_BCM2835_SOC_I2S=m
CONFIG_SND_BCM63XX_I2S_WHISTLER=m
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DESIGNWARE_PCM=y

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_MQS=m
CONFIG_SND_SOC_FSL_AUDMIX=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
CONFIG_SND_SOC_FSL_MICFIL=m
CONFIG_SND_SOC_FSL_EASRC=m
CONFIG_SND_SOC_IMX_AUDMUX=m
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=m
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=m
CONFIG_SND_SOC_IMG_I2S_OUT=m
CONFIG_SND_SOC_IMG_PARALLEL_OUT=m
CONFIG_SND_SOC_IMG_SPDIF_IN=m
CONFIG_SND_SOC_IMG_SPDIF_OUT=m
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=m
CONFIG_SND_SOC_MTK_BTCVSD=m
CONFIG_SND_SOC_SOF_TOPLEVEL=y
# CONFIG_SND_SOC_SOF_PCI is not set
# CONFIG_SND_SOC_SOF_OF is not set
# CONFIG_SND_SOC_SOF_DEBUG_PROBES is not set
# CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT is not set

#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support

CONFIG_SND_SOC_XILINX_I2S=m
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=m
CONFIG_SND_SOC_XILINX_SPDIF=m
CONFIG_SND_SOC_XTFPGA_I2S=m
CONFIG_ZX_TDM=m
CONFIG_SND_SOC_I2C_AND_SPI=m

#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4118=m
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_BD28623=m
CONFIG_SND_SOC_BT_SCO=m
# CONFIG_SND_SOC_CPCAP is not set
CONFIG_SND_SOC_CROS_EC_CODEC=m
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS4234=m
CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS4271_SPI=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
CONFIG_SND_SOC_CS4341=m
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS53L30=m
# CONFIG_SND_SOC_CX2072X is not set
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_INNO_RK3036=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=m
CONFIG_SND_SOC_MAX98927=m
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
CONFIG_SND_SOC_MAX98373_SDW=m
CONFIG_SND_SOC_MAX98390=m
CONFIG_SND_SOC_MAX9860=m
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM186X_SPI=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
CONFIG_SND_SOC_PCM3060_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM3168A_SPI=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x_SPI=m
CONFIG_SND_SOC_RK3328=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT1308_SDW=m
CONFIG_SND_SOC_RT5616=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2305=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_SPI=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_STA350=m
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
CONFIG_SND_SOC_TAS2562=m
CONFIG_SND_SOC_TAS2764=m
CONFIG_SND_SOC_TAS2770=m
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TAS5720=m
CONFIG_SND_SOC_TAS6424=m
CONFIG_SND_SOC_TDA7419=m
CONFIG_SND_SOC_TFA9879=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC23_SPI=m
CONFIG_SND_SOC_TLV320AIC31XX=m
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC32X4_SPI=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320ADCX140=m
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_TSCS42XX=m
CONFIG_SND_SOC_TSCS454=m
# CONFIG_SND_SOC_UDA1334 is not set
CONFIG_SND_SOC_WCD9335=m
CONFIG_SND_SOC_WCD934X=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8804_SPI=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_WSA881X=m
CONFIG_SND_SOC_ZL38060=m
CONFIG_SND_SOC_ZX_AUD96P22=m
CONFIG_SND_SOC_MAX9759=m
CONFIG_SND_SOC_MT6351=m
CONFIG_SND_SOC_MT6358=m
CONFIG_SND_SOC_MT6660=m
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8822=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_TPA6130A2=m
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD=m
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACCUTOUCH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
CONFIG_HID_BIGBEN_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_GLORIOUS=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_GOOGLE_HAMMER=m
CONFIG_HID_VIVALDI=m
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
CONFIG_HID_REDRAGON=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_RETRODE=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_U2FZERO=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
CONFIG_HID_MCP2221=m
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# end of USB HID Boot Protocol drivers
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID=m
# end of I2C HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=m
CONFIG_USB_XHCI_PCI_RENESAS=m
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_FSL=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_MAX3421_HCD=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VUDC=m
# CONFIG_USBIP_DEBUG is not set
# CONFIG_USB_CDNS3 is not set
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_GADGET is not set
# CONFIG_USB_MUSB_DUAL_ROLE is not set

#
# Platform Glue Layer
#

#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_ULPI=y
CONFIG_USB_DWC3_HOST=y
# CONFIG_USB_DWC3_GADGET is not set
# CONFIG_USB_DWC3_DUAL_ROLE is not set

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_HAPS=m
CONFIG_USB_DWC3_OF_SIMPLE=m
CONFIG_USB_DWC2=m
# CONFIG_USB_DWC2_HOST is not set

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
# CONFIG_USB_DWC2_PCI is not set
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=m
# CONFIG_USB_CHIPIDEA_UDC is not set
# CONFIG_USB_CHIPIDEA_HOST is not set
CONFIG_USB_CHIPIDEA_PCI=m
CONFIG_USB_CHIPIDEA_MSM=m
CONFIG_USB_CHIPIDEA_IMX=m
CONFIG_USB_CHIPIDEA_GENERIC=m
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
# CONFIG_USB_ISP1760_DUAL_ROLE is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_F8153X=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_APPLE_MFI_FASTCHARGE=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HUB_USB251XB=m
CONFIG_USB_HSIC_USB3503=m
CONFIG_USB_HSIC_USB4604=m
CONFIG_USB_LINK_LAYER_TEST=m
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_USB_GPIO_VBUS=m
CONFIG_TAHVO_USB=m
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=m
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
# CONFIG_U_SERIAL_CONSOLE is not set

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
CONFIG_USB_GR_UDC=m
CONFIG_USB_R8A66597=m
CONFIG_USB_PXA27X=m
CONFIG_USB_MV_UDC=m
CONFIG_USB_MV_U3D=m
# CONFIG_USB_SNP_UDC_PLAT is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
CONFIG_USB_NET2272=m
# CONFIG_USB_NET2272_DMA is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_GADGET_XILINX is not set
CONFIG_USB_MAX3420_UDC=m
# CONFIG_USB_DUMMY_HCD is not set
# end of USB Peripheral Controller

CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_PHONET=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_UAC2=m
CONFIG_USB_F_UVC=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_F_TCM=m
# CONFIG_USB_CONFIGFS is not set

#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
# CONFIG_GADGET_UAC1 is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_GADGET_TARGET=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_RNDIS=y
# CONFIG_USB_G_MULTI_CDC is not set
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=m
CONFIG_USB_RAW_GADGET=m
# end of USB Gadget precomposed configurations

CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_TCPCI=m
# CONFIG_TYPEC_RT1711H is not set
CONFIG_TYPEC_MT6360=m
CONFIG_TYPEC_TCPCI_MAXIM=m
CONFIG_TYPEC_FUSB302=m
CONFIG_TYPEC_UCSI=m
CONFIG_UCSI_CCG=m
CONFIG_TYPEC_HD3SS3220=m
CONFIG_TYPEC_TPS6598X=m
CONFIG_TYPEC_STUSB160X=m

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_PI3USB30532=m
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=m
CONFIG_TYPEC_NVIDIA_ALTMODE=m
# end of USB Type-C Alternate Mode drivers

CONFIG_USB_ROLE_SWITCH=m
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SD8787=m
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_STM32_SDMMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=m
# CONFIG_MMC_SDHCI_OF_ASPEED is not set
CONFIG_MMC_SDHCI_OF_AT91=m
# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
CONFIG_MMC_SDHCI_CADENCE=m
CONFIG_MMC_SDHCI_F_SDH30=m
CONFIG_MMC_SDHCI_MILBEAUT=m
CONFIG_MMC_SDHCI_IPROC=y
# CONFIG_MMC_ALCOR is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=m
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MMC_DW=m
CONFIG_MMC_DW_PLTFM=m
# CONFIG_MMC_DW_BLUEFIELD is not set
CONFIG_MMC_DW_EXYNOS=m
# CONFIG_MMC_DW_HI3798CV200 is not set
CONFIG_MMC_DW_K3=m
# CONFIG_MMC_DW_PCI is not set
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_CQHCI=m
CONFIG_MMC_HSQ=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_BCM2835 is not set
CONFIG_MMC_MTK=m
CONFIG_MMC_SDHCI_XENON=m
# CONFIG_MMC_SDHCI_OMAP is not set
# CONFIG_MMC_SDHCI_AM654 is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
# CONFIG_MEMSTICK_REALTEK_PCI is not set
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
CONFIG_LEDS_AAT1290=m
# CONFIG_LEDS_AN30259A is not set
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_AW2013=m
CONFIG_LEDS_BCM6328=m
CONFIG_LEDS_BCM6358=m
CONFIG_LEDS_CPCAP=m
# CONFIG_LEDS_CR0014114 is not set
CONFIG_LEDS_EL15203000=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
# CONFIG_LEDS_LM3692X is not set
CONFIG_LEDS_LM3601X=m
CONFIG_LEDS_MT6323=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
CONFIG_LEDS_LP8788=m
CONFIG_LEDS_LP8860=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA903X=m
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_MENF21BMC=m
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_IS31FL319X=m
CONFIG_LEDS_IS31FL32XX=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
# CONFIG_LEDS_SPI_BYTE is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
CONFIG_LEDS_TPS6105X=m
CONFIG_LEDS_SGM3140=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=m
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_EFA is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_HNS is not set
# CONFIG_INFINIBAND_BNXT_RE is not set
# CONFIG_RDMA_RXE is not set
# CONFIG_RDMA_SIW is not set
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_INFINIBAND_ISERT is not set
CONFIG_INFINIBAND_RTRS=m
CONFIG_INFINIBAND_RTRS_CLIENT=m
CONFIG_INFINIBAND_RTRS_SERVER=m
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_THUNDERX is not set
# CONFIG_EDAC_XGENE is not set
CONFIG_EDAC_DMC520=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=m
CONFIG_RTC_DRV_88PM80X=m
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_AS3722=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_LP8788=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_MAX8997=m
CONFIG_RTC_DRV_MAX77686=m
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_ISL12026 is not set
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_BD70528 is not set
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_PALMAS=m
CONFIG_RTC_DRV_TPS6586X=m
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_TPS80031=m
CONFIG_RTC_DRV_RC5T583=m
CONFIG_RTC_DRV_RC5T619=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3028=m
CONFIG_RTC_DRV_RV3032=m
CONFIG_RTC_DRV_RV8803=m
CONFIG_RTC_DRV_S5M=m
CONFIG_RTC_DRV_SD3078=m

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1302=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6916=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RX4581=m
CONFIG_RTC_DRV_RX6110=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_DA9055=m
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_EFI=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_AB3100=m
CONFIG_RTC_DRV_ZYNQMP=m
CONFIG_RTC_DRV_CROS_EC=m

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PL030=m
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_CADENCE=m
CONFIG_RTC_DRV_FTRTC010=m
CONFIG_RTC_DRV_PCAP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_MT6397=m
CONFIG_RTC_DRV_R7301=m
CONFIG_RTC_DRV_CPCAP=m

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=m
CONFIG_AMBA_PL08X=y
CONFIG_BCM_SBA_RAID=m
CONFIG_DMA_BCM2835=y
# CONFIG_DW_AXI_DMAC is not set
CONFIG_FSL_EDMA=m
CONFIG_FSL_QDMA=m
# CONFIG_HISI_DMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_MV_XOR_V2 is not set
CONFIG_PL330_DMA=m
CONFIG_PLX_DMA=m
# CONFIG_XILINX_DMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
CONFIG_XILINX_ZYNQMP_DPDMA=m
CONFIG_QCOM_HIDMA_MGMT=m
CONFIG_QCOM_HIDMA=m
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_SF_PDMA=m

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
CONFIG_DMABUF_HEAPS_CMA=y
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_HD44780=m
CONFIG_IMG_ASCII_LCD=m
CONFIG_HT16K33=m
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=m
CONFIG_CHARLCD=m
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_UIO_PRUSS=m
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PLATFORM is not set
CONFIG_VFIO_MDEV=m
# CONFIG_VFIO_MDEV_DEVICE is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_VDPA=m
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
CONFIG_VDPA=m
CONFIG_VDPA_SIM=m
CONFIG_IFCVF=m
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST_RING=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST_VDPA=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=m
CONFIG_GREYBUS_ES2=m
CONFIG_STAGING=y
CONFIG_PRISM2_USB=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
# CONFIG_COMEDI_ISA_DRIVERS is not set
# CONFIG_COMEDI_PCI_DRIVERS is not set
# CONFIG_COMEDI_PCMCIA_DRIVERS is not set
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_NI_USB6501=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_8255_SA=m
CONFIG_COMEDI_KCOMEDILIB=m
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
# CONFIG_RTL8192E is not set
CONFIG_RTL8723BS=m
CONFIG_R8712U=m
CONFIG_R8188EU=m
CONFIG_88EU_AP_MODE=y
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
CONFIG_VT6656=m

#
# IIO staging drivers
#

#
# Accelerometers
#
CONFIG_ADIS16203=m
CONFIG_ADIS16240=m
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD7816=m
CONFIG_AD7280=m
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m
# end of Analog digital bi-direction converters

#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7746=m
# end of Capacitance to digital converters

#
# Direct Digital Synthesis
#
CONFIG_AD9832=m
CONFIG_AD9834=m
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
# end of Network Analyzer, Impedance Converters

#
# Active energy metering IC
#
CONFIG_ADE7854=m
CONFIG_ADE7854_I2C=m
CONFIG_ADE7854_SPI=m
# end of Active energy metering IC

#
# Resolver to digital converters
#
CONFIG_AD2S1210=m
# end of Resolver to digital converters
# end of IIO staging drivers

# CONFIG_FB_SM750 is not set
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m

#
# Android
#
# CONFIG_ASHMEM is not set
# CONFIG_ION is not set
# end of Android

# CONFIG_STAGING_BOARD is not set
CONFIG_LTE_GDM724X=m
CONFIG_GS_FPGABOOT=m
CONFIG_UNISYSSPAR=y
CONFIG_FB_TFT=m
CONFIG_FB_TFT_AGM1264K_FL=m
CONFIG_FB_TFT_BD663474=m
CONFIG_FB_TFT_HX8340BN=m
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
CONFIG_FB_TFT_HX8357D=m
CONFIG_FB_TFT_ILI9163=m
CONFIG_FB_TFT_ILI9320=m
CONFIG_FB_TFT_ILI9325=m
CONFIG_FB_TFT_ILI9340=m
CONFIG_FB_TFT_ILI9341=m
CONFIG_FB_TFT_ILI9481=m
CONFIG_FB_TFT_ILI9486=m
CONFIG_FB_TFT_PCD8544=m
CONFIG_FB_TFT_RA8875=m
CONFIG_FB_TFT_S6D02A1=m
CONFIG_FB_TFT_S6D1121=m
CONFIG_FB_TFT_SEPS525=m
CONFIG_FB_TFT_SH1106=m
CONFIG_FB_TFT_SSD1289=m
CONFIG_FB_TFT_SSD1305=m
CONFIG_FB_TFT_SSD1306=m
CONFIG_FB_TFT_SSD1331=m
CONFIG_FB_TFT_SSD1351=m
CONFIG_FB_TFT_ST7735R=m
CONFIG_FB_TFT_ST7789V=m
CONFIG_FB_TFT_TINYLCD=m
CONFIG_FB_TFT_TLS8204=m
CONFIG_FB_TFT_UC1611=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
CONFIG_FB_TFT_WATTEROTT=m
CONFIG_MOST_COMPONENTS=m
CONFIG_MOST_NET=m
CONFIG_MOST_SOUND=m
CONFIG_MOST_VIDEO=m
# CONFIG_MOST_DIM2 is not set
CONFIG_MOST_I2C=m
CONFIG_KS7010=m
CONFIG_GREYBUS_AUDIO=m
CONFIG_GREYBUS_AUDIO_APB_CODEC=m
CONFIG_GREYBUS_BOOTROM=m
CONFIG_GREYBUS_FIRMWARE=m
CONFIG_GREYBUS_HID=m
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_POWER=m
CONFIG_GREYBUS_RAW=m
CONFIG_GREYBUS_VIBRATOR=m
CONFIG_GREYBUS_BRIDGED_PHY=m
CONFIG_GREYBUS_GPIO=m
CONFIG_GREYBUS_I2C=m
CONFIG_GREYBUS_PWM=m
CONFIG_GREYBUS_SDIO=m
CONFIG_GREYBUS_SPI=m
CONFIG_GREYBUS_UART=m
CONFIG_GREYBUS_USB=m
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=y
CONFIG_SND_BCM2835=m
CONFIG_VIDEO_BCM2835=m
CONFIG_BCM2835_VCHIQ_MMAL=m
CONFIG_PI433=m

#
# Gasket devices
#
# CONFIG_STAGING_GASKET_FRAMEWORK is not set
# end of Gasket devices

CONFIG_XIL_AXIS_FIFO=m
CONFIG_FIELDBUS_DEV=m
CONFIG_HMS_ANYBUSS_BUS=m
CONFIG_ARCX_ANYBUS_CONTROLLER=m
CONFIG_HMS_PROFINET=m
# CONFIG_KPC2000 is not set
# CONFIG_QLGE is not set
CONFIG_WFX=m
CONFIG_SPMI_HISI3670=m
CONFIG_MFD_HI6421_SPMI=m
CONFIG_REGULATOR_HI6421V600=m
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=m
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_RPMSG=m
CONFIG_CROS_EC_SPI=m
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LIGHTBAR=m
CONFIG_CROS_EC_VBC=m
CONFIG_CROS_EC_DEBUGFS=m
CONFIG_CROS_EC_SENSORHUB=m
CONFIG_CROS_EC_SYSFS=m
CONFIG_CROS_EC_TYPEC=m
CONFIG_CROS_USBPD_LOGGER=m
CONFIG_CROS_USBPD_NOTIFY=m
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=m
CONFIG_COMMON_CLK_MAX77686=m
CONFIG_COMMON_CLK_MAX9485=m
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_SCPI=m
# CONFIG_COMMON_CLK_SI5341 is not set
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_SI514=m
CONFIG_COMMON_CLK_SI544=m
CONFIG_COMMON_CLK_SI570=m
CONFIG_COMMON_CLK_CDCE706=m
CONFIG_COMMON_CLK_CDCE925=m
CONFIG_COMMON_CLK_CS2000_CP=m
CONFIG_COMMON_CLK_S2MPS11=m
CONFIG_CLK_TWL6040=m
# CONFIG_CLK_QORIQ is not set
CONFIG_COMMON_CLK_XGENE=y
CONFIG_COMMON_CLK_PALMAS=m
CONFIG_COMMON_CLK_PWM=m
CONFIG_COMMON_CLK_VC5=m
# CONFIG_COMMON_CLK_BD718XX is not set
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_BCM2711_DVP=y
CONFIG_CLK_BCM2835=y
CONFIG_CLK_RASPBERRYPI=y
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
CONFIG_FSL_ERRATUM_A008585=y
CONFIG_HISILICON_ERRATUM_161010101=y
CONFIG_ARM64_ERRATUM_858921=y
CONFIG_ARM_TIMER_SP804=y
CONFIG_MICROCHIP_PIT64B=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_ARM_MHU=m
CONFIG_PLATFORM_MHU=m
CONFIG_PL320_MBOX=y
CONFIG_ALTERA_MBOX=m
CONFIG_BCM2835_MBOX=y
CONFIG_MAILBOX_TEST=m
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
# CONFIG_ARM_SMMU is not set
# CONFIG_ARM_SMMU_V3 is not set
# CONFIG_VIRTIO_IOMMU is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=m

#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_QCOM=m

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers

#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_RASPBERRYPI_POWER=y
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_QUICC_ENGINE=y
CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_QE_TDM=y
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_QMI_HELPERS=m
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
CONFIG_XILINX_VCU=m
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_ARIZONA=m
# CONFIG_EXTCON_FSA9480 is not set
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_MAX77843=m
CONFIG_EXTCON_MAX8997=m
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_USBC_CROS_EC=m
CONFIG_MEMORY=y
CONFIG_ARM_PL172_MPMC=m
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m

#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16209=m
CONFIG_ADXL372=m
CONFIG_ADXL372_SPI=m
CONFIG_ADXL372_I2C=m
CONFIG_BMA220=m
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
CONFIG_DA280=m
CONFIG_DA311=m
CONFIG_DMARD06=m
CONFIG_DMARD09=m
CONFIG_DMARD10=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
CONFIG_KXSD9=m
CONFIG_KXSD9_SPI=m
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=m
CONFIG_MMA7660=m
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_SCA3000=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
CONFIG_AD7091R5=m
CONFIG_AD7124=m
CONFIG_AD7192=m
CONFIG_AD7266=m
CONFIG_AD7291=m
CONFIG_AD7292=m
CONFIG_AD7298=m
CONFIG_AD7476=m
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD7766=m
CONFIG_AD7768_1=m
CONFIG_AD7780=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
CONFIG_AD7949=m
CONFIG_AD799X=m
CONFIG_AD9467=m
CONFIG_ADI_AXI_ADC=m
CONFIG_AXP20X_ADC=m
CONFIG_AXP288_ADC=m
CONFIG_CC10001_ADC=m
CONFIG_CPCAP_ADC=m
CONFIG_DA9150_GPADC=m
CONFIG_DLN2_ADC=m
CONFIG_ENVELOPE_DETECTOR=m
CONFIG_HI8435=m
CONFIG_HX711=m
CONFIG_INA2XX_ADC=m
CONFIG_LP8788_ADC=m
CONFIG_LTC2471=m
CONFIG_LTC2485=m
CONFIG_LTC2496=m
CONFIG_LTC2497=m
CONFIG_MAX1027=m
CONFIG_MAX11100=m
CONFIG_MAX1118=m
CONFIG_MAX1241=m
CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP320X=m
CONFIG_MCP3422=m
CONFIG_MCP3911=m
CONFIG_MEN_Z188_ADC=m
CONFIG_MP2629_ADC=m
CONFIG_NAU7802=m
CONFIG_PALMAS_GPADC=m
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
CONFIG_QCOM_SPMI_ADC5=m
CONFIG_RN5T618_ADC=m
# CONFIG_SD_ADC_MODULATOR is not set
CONFIG_STMPE_ADC=m
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=m
CONFIG_TI_ADC084S021=m
CONFIG_TI_ADC12138=m
CONFIG_TI_ADC108S102=m
CONFIG_TI_ADC128S052=m
CONFIG_TI_ADC161S626=m
CONFIG_TI_ADS1015=m
CONFIG_TI_ADS7950=m
CONFIG_TI_ADS8344=m
CONFIG_TI_ADS8688=m
CONFIG_TI_ADS124S08=m
CONFIG_TI_AM335X_ADC=m
CONFIG_TI_TLC4541=m
CONFIG_TWL4030_MADC=m
CONFIG_TWL6030_GPADC=m
CONFIG_VF610_ADC=m
CONFIG_VIPERBOARD_ADC=m
# CONFIG_XILINX_XADC is not set
# end of Analog to digital converters

#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_AD8366=m
CONFIG_HMC425=m
# end of Amplifiers

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
CONFIG_ATLAS_EZO_SENSOR=m
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_BME680_SPI=m
CONFIG_CCS811=m
CONFIG_IAQCORE=m
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=m
CONFIG_SCD30_I2C=m
CONFIG_SCD30_SERIAL=m
CONFIG_SENSIRION_SGP30=m
CONFIG_SPS30=m
CONFIG_VZ89X=m
# end of Chemical Sensors

CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
# CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE is not set

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=m

#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=m
CONFIG_IIO_SSP_SENSORHUB=m
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=m
CONFIG_AD5592R_BASE=m
CONFIG_AD5592R=m
CONFIG_AD5593R=m
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
CONFIG_AD5686=m
CONFIG_AD5686_SPI=m
CONFIG_AD5696_I2C=m
CONFIG_AD5755=m
CONFIG_AD5758=m
CONFIG_AD5761=m
CONFIG_AD5764=m
CONFIG_AD5770R=m
CONFIG_AD5791=m
CONFIG_AD7303=m
CONFIG_AD8801=m
CONFIG_DPOT_DAC=m
CONFIG_DS4424=m
CONFIG_LTC1660=m
CONFIG_LTC2632=m
CONFIG_M62332=m
CONFIG_MAX517=m
CONFIG_MAX5821=m
CONFIG_MCP4725=m
CONFIG_MCP4922=m
CONFIG_TI_DAC082S085=m
CONFIG_TI_DAC5571=m
CONFIG_TI_DAC7311=m
CONFIG_TI_DAC7612=m
CONFIG_VF610_DAC=m
# end of Digital to analog converters

#
# IIO dummy driver
#
CONFIG_IIO_SIMPLE_DUMMY=m
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
# end of IIO dummy driver

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m
# CONFIG_ADF4371 is not set
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
CONFIG_ADIS16260=m
CONFIG_ADXRS290=m
CONFIG_ADXRS450=m
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
CONFIG_ITG3200=m
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4403=m
CONFIG_AFE4404=m
CONFIG_MAX30100=m
CONFIG_MAX30102=m
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=m
CONFIG_DHT11=m
CONFIG_HDC100X=m
CONFIG_HDC2010=m
CONFIG_HID_SENSOR_HUMIDITY=m
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
CONFIG_HTU21=m
CONFIG_SI7005=m
CONFIG_SI7020=m
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_ADIS16400=m
# CONFIG_ADIS16460 is not set
CONFIG_ADIS16475=m
CONFIG_ADIS16480=m
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_FXOS8700_SPI=m
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
CONFIG_INV_ICM42600_SPI=m
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_INV_MPU6050_SPI=m
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
CONFIG_IIO_ST_LSM6DSX_I3C=m
# end of Inertial measurement units

CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=m
CONFIG_AL3010=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_APDS9960=m
CONFIG_AS73211=m
CONFIG_BH1750=m
CONFIG_BH1780=m
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
CONFIG_CM3605=m
CONFIG_CM36651=m
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_GP2AP002=m
CONFIG_GP2AP020A00F=m
CONFIG_IQS621_ALS=m
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=m
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
CONFIG_LV0104CS=m
CONFIG_MAX44000=m
CONFIG_MAX44009=m
# CONFIG_NOA1305 is not set
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_SI1133=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
CONFIG_TSL2772=m
CONFIG_TSL4531=m
CONFIG_US5182D=m
CONFIG_VCNL4000=m
CONFIG_VCNL4035=m
CONFIG_VEML6030=m
CONFIG_VEML6070=m
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8974=m
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=m
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
CONFIG_SENSORS_RM3100_SPI=m
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=m
# end of Multiplexers

#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone

#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=m
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5272=m
CONFIG_DS1803=m
# CONFIG_MAX5432 is not set
CONFIG_MAX5481=m
CONFIG_MAX5487=m
CONFIG_MCP4018=m
CONFIG_MCP4131=m
CONFIG_MCP4531=m
CONFIG_MCP41010=m
CONFIG_TPL0102=m
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_IIO_CROS_EC_BARO=m
CONFIG_DLHL60D=m
# CONFIG_DPS310 is not set
CONFIG_HID_SENSOR_PRESS=m
CONFIG_HP03=m
CONFIG_ICP10100=m
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
CONFIG_MPL115_SPI=m
CONFIG_MPL3115=m
CONFIG_MS5611=m
CONFIG_MS5611_I2C=m
CONFIG_MS5611_SPI=m
CONFIG_MS5637=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_T5403=m
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=m
# end of Pressure sensors

#
# Lightning sensors
#
CONFIG_AS3935=m
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_ISL29501=m
CONFIG_LIDAR_LITE_V2=m
CONFIG_MB1232=m
CONFIG_PING=m
CONFIG_RFD77402=m
CONFIG_SRF04=m
CONFIG_SX9310=m
CONFIG_SX9500=m
CONFIG_SRF08=m
CONFIG_VCNL3020=m
CONFIG_VL53L0X_I2C=m
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
CONFIG_AD2S90=m
CONFIG_AD2S1200=m
# end of Resolver to digital converters

#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=m
CONFIG_LTC2983=m
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_HID_SENSOR_TEMP=m
CONFIG_MLX90614=m
CONFIG_MLX90632=m
CONFIG_TMP006=m
CONFIG_TMP007=m
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
CONFIG_MAX31856=m
# end of Temperature sensors

# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
CONFIG_PWM_ATMEL_HLCDC_PWM=m
CONFIG_PWM_BCM2835=m
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_FSL_FTM=m
CONFIG_PWM_IQS620A=m
CONFIG_PWM_LP3943=m
CONFIG_PWM_PCA9685=m
CONFIG_PWM_STMPE=y
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
# CONFIG_AL_FIC is not set
CONFIG_MADERA_IRQ=m
CONFIG_PARTITION_PERCPU=y
# end of IRQ chip support

CONFIG_IPACK_BUS=m
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_INTEL_GW=y
CONFIG_RESET_RASPBERRYPI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_TI_SYSCON=m

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_XGENE is not set
CONFIG_BCM_KONA_USB2_PHY=m
CONFIG_PHY_CADENCE_TORRENT=m
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
CONFIG_PHY_CADENCE_SALVO=m
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=m
CONFIG_PHY_CPCAP_USB=m
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
# CONFIG_PHY_OCELOT_SERDES is not set
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_PHY_TUSB1210=m
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_IDLE_INJECT=y
CONFIG_MCB=m
# CONFIG_MCB_PCI is not set
CONFIG_MCB_LPC=m

#
# Performance monitor support
#
CONFIG_ARM_CCI_PMU=y
CONFIG_ARM_CCI400_PMU=y
CONFIG_ARM_CCI5xx_PMU=y
CONFIG_ARM_CCN=y
CONFIG_ARM_CMN=m
CONFIG_ARM_PMU=y
# CONFIG_ARM_DSU_PMU is not set
CONFIG_ARM_SPE_PMU=m
# end of Performance monitor support

CONFIG_RAS=y
CONFIG_USB4=m
# CONFIG_USB4_DEBUGFS_WRITE is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_OF_PMEM=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_SPMI_SDAM=m
CONFIG_RAVE_SP_EEPROM=m

#
# HW tracing support
#
CONFIG_STM=m
CONFIG_STM_PROTO_BASIC=m
CONFIG_STM_PROTO_SYS_T=m
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

CONFIG_FPGA=m
CONFIG_ALTERA_PR_IP_CORE=m
# CONFIG_ALTERA_PR_IP_CORE_PLAT is not set
CONFIG_FPGA_MGR_ALTERA_PS_SPI=m
# CONFIG_FPGA_MGR_ALTERA_CVP is not set
CONFIG_FPGA_MGR_XILINX_SPI=m
CONFIG_FPGA_MGR_ICE40_SPI=m
CONFIG_FPGA_MGR_MACHXO2_SPI=m
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
# CONFIG_OF_FPGA_REGION is not set
CONFIG_FPGA_DFL=m
# CONFIG_FPGA_DFL_FME is not set
# CONFIG_FPGA_DFL_AFU is not set
# CONFIG_FPGA_DFL_PCI is not set
CONFIG_FSI=m
# CONFIG_FSI_NEW_DEV_NODE is not set
CONFIG_FSI_MASTER_GPIO=m
CONFIG_FSI_MASTER_HUB=m
CONFIG_FSI_MASTER_ASPEED=m
CONFIG_FSI_SCOM=m
# CONFIG_FSI_SBEFIFO is not set
CONFIG_TEE=m

#
# TEE drivers
#
# CONFIG_OPTEE is not set
# end of TEE drivers

CONFIG_MULTIPLEXER=m

#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
# CONFIG_MUX_ADGS1408 is not set
# CONFIG_MUX_GPIO is not set
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=m
# CONFIG_SIOX_BUS_GPIO is not set
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
# CONFIG_INTERCONNECT is not set
CONFIG_COUNTER=m
CONFIG_FTM_QUADDEC=m
CONFIG_MICROCHIP_TCB_CAPTURE=m
CONFIG_MOST=m
CONFIG_MOST_USB_HDM=m
CONFIG_MOST_CDEV=m
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_ZONEFS_FS=m
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
CONFIG_OVERLAY_FS_XINO_AUTO=y
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=m
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
# CONFIG_JFFS2_CMODE_PRIORITY is not set
# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_UBIFS_FS_AUTHENTICATION=y
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_CRAMFS_MTD=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
CONFIG_PSTORE_ZONE=m
CONFIG_PSTORE_BLK=m
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_PSTORE_BLK_CONSOLE_SIZE=64
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EROFS_FS=m
# CONFIG_EROFS_FS_DEBUG is not set
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
# CONFIG_EROFS_FS_SECURITY is not set
# CONFIG_EROFS_FS_ZIP is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_2_INTER_SSC=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB_DIRECT is not set
CONFIG_CIFS_FSCACHE=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
# CONFIG_AFS_DEBUG_CURSOR is not set
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_INFINIBAND is not set
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=0
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_SMACK_BRINGUP=y
CONFIG_SECURITY_SMACK_NETFILTER=y
CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY is not set
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_EVM_EXTRA_SMACK_XATTRS=y
CONFIG_EVM_ADD_XATTRS=y
# CONFIG_EVM_LOAD_X509 is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="yama,integrity,apparmor"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_ENGINE=m

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECRDSA=m
CONFIG_CRYPTO_SM2=m
CONFIG_CRYPTO_CURVE25519=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_AEGIS128_SIMD=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_NHPOLY1305=m
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_BLAKE2S=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=m
CONFIG_CRYPTO_STREEBOG=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
CONFIG_CRYPTO_STATS=y
CONFIG_CRYPTO_HASH_INFO=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=m
CONFIG_CRYPTO_LIB_BLAKE2S=m
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
CONFIG_CRYPTO_DEV_CCREE=m
# CONFIG_CRYPTO_DEV_HISI_SEC is not set
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_TPM_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=m
CONFIG_SIGNED_PE_FILE_VERIFICATION=y

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
# CONFIG_INDIRECT_PIO is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
CONFIG_CRC4=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_AUDIT_COMPAT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_REMAP=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=5
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
# CONFIG_FONT_MINI_4x6 is not set
CONFIG_FONT_6x10=y
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_TER16x32 is not set
# CONFIG_FONT_6x8 is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_BTF is not set
CONFIG_GDB_SCRIPTS=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_HONOUR_BLOCKLIST=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
# CONFIG_PAGE_POISONING_ZERO is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_HAVE_DEBUG_BUGVERBOSE=y

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
CONFIG_TRACE_EVENT_INJECT=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set

#
# arm64 Debugging
#
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_EFI is not set
CONFIG_ARM64_RELOC_TEST=m
# CONFIG_CORESIGHT is not set
# end of arm64 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
CONFIG_TEST_LKM=m
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
# end of Kernel hacking

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-20 17:21                   ` Sudip Mukherjee
@ 2021-09-22  9:57                     ` Maxime Ripard
  2021-09-22 10:10                       ` Sudip Mukherjee
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-22  9:57 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

[-- Attachment #1: Type: text/plain, Size: 3329 bytes --]

On Mon, Sep 20, 2021 at 06:21:42PM +0100, Sudip Mukherjee wrote:
> On Mon, Sep 20, 2021 at 6:10 PM Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > On Mon, Sep 20, 2021 at 05:35:00PM +0100, Sudip Mukherjee wrote:
> > > On Mon, Sep 20, 2021 at 4:53 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > On Mon, Sep 20, 2021 at 05:43:33PM +0200, Maxime Ripard wrote:
> > > > > On Mon, Sep 20, 2021 at 04:47:31PM +0200, Maxime Ripard wrote:
> > > > > > On Sat, Sep 04, 2021 at 10:40:29AM +0100, Sudip Mukherjee wrote:
> > > > > > > Hi Maxime,
> > > > > > >
> > > > > > > On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > >
> > > > > > > > On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > > > > > > > > Hi Maxime,
> > > > > > > > >
> > > > > > > > > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > > > >
> > > > > > > > > > Hi Sudip,
> > > > > > > > > >
> > > > > > > > > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > > > > > > > > Hi All,
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > <snip>
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > You can see the complete dmesg at
> > > > > > > > > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > > > > > > > > >
> > > > > > > > > > What test were you running?
> > > > > > > > >
> > > > > > > > > Nothing particular, its just a boot test that we do every night after
> > > > > > > > > pulling from torvalds/linux.git
> > > > > > > >
> > > > > > > > What are you booting to then?
> > > > > > >
> > > > > > > I am not sure I understood the question.
> > > > > > > Its an Ubuntu image. The desktop environment is gnome. And as
> > > > > > > mentioned earlier, we use the HEAD of linus tree every night to boot
> > > > > > > the rpi4 and test that we can login via desktop environment and that
> > > > > > > there is no regression in dmesg.
> > > > > >
> > > > > > Looking at the CI, this isn't from a RPi but from qemu?
> > >
> > > No, this is from rpi4 board (4GB), not qemu. The CI is a little
> > > complicated here, lava boots the board with the new kernel and will
> > > then trigger the openQA job. openQA will then connect to the board
> > > using vnc to test the desktop. This is the last link that I sent to
> > > Linus when he asked for it.
> > > https://lava.qa.codethink.co.uk/scheduler/job/164#L1356
> > >
> > > And this is the lava job for today -
> > > https://lava.qa.codethink.co.uk/scheduler/job/173
> >
> > Is it connected to a monitor then?
> 
> Missed replying to this one earlier. I have a hdmi lilliput monitor
> connected to it.
> 
> >
> > > > > >
> > > > > > What defconfig are you using? How did you generate the Ubuntu image?
> > > > > > Through debootstrap? Any additional package?
> > >
> > > Its the default ubuntu config. I can send you the config if you want.
> >
> > Yes, please.
> 
> Attached.
> My build script will copy this config as .config,  do olddefconfig
> and then build.

I still can't reproduce it.

What other customisations did you do to that image? It looks like
there's some customs scripts in there (test-mainline.sh), what are they
doing?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-22  9:57                     ` Maxime Ripard
@ 2021-09-22 10:10                       ` Sudip Mukherjee
  2021-09-22 11:28                         ` Maxime Ripard
  2021-09-22 15:22                         ` Linus Torvalds
  0 siblings, 2 replies; 27+ messages in thread
From: Sudip Mukherjee @ 2021-09-22 10:10 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

On Wed, Sep 22, 2021 at 10:57 AM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Mon, Sep 20, 2021 at 06:21:42PM +0100, Sudip Mukherjee wrote:
> > On Mon, Sep 20, 2021 at 6:10 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > On Mon, Sep 20, 2021 at 05:35:00PM +0100, Sudip Mukherjee wrote:
> > > > On Mon, Sep 20, 2021 at 4:53 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > >
> > > > > On Mon, Sep 20, 2021 at 05:43:33PM +0200, Maxime Ripard wrote:
> > > > > > On Mon, Sep 20, 2021 at 04:47:31PM +0200, Maxime Ripard wrote:
> > > > > > > On Sat, Sep 04, 2021 at 10:40:29AM +0100, Sudip Mukherjee wrote:
> > > > > > > > Hi Maxime,
> > > > > > > >
> > > > > > > > On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > > >
> > > > > > > > > On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > > > > > > > > > Hi Maxime,
> > > > > > > > > >
> > > > > > > > > > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > > > > >
> > > > > > > > > > > Hi Sudip,
> > > > > > > > > > >
> > > > > > > > > > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > > > > > > > > > Hi All,
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > <snip>
> > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > You can see the complete dmesg at
> > > > > > > > > > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > > > > > > > > > >
> > > > > > > > > > > What test were you running?
> > > > > > > > > >
> > > > > > > > > > Nothing particular, its just a boot test that we do every night after
> > > > > > > > > > pulling from torvalds/linux.git
> > > > > > > > >
> > > > > > > > > What are you booting to then?
> > > > > > > >
> > > > > > > > I am not sure I understood the question.
> > > > > > > > Its an Ubuntu image. The desktop environment is gnome. And as
> > > > > > > > mentioned earlier, we use the HEAD of linus tree every night to boot
> > > > > > > > the rpi4 and test that we can login via desktop environment and that
> > > > > > > > there is no regression in dmesg.
> > > > > > >
> > > > > > > Looking at the CI, this isn't from a RPi but from qemu?
> > > >
> > > > No, this is from rpi4 board (4GB), not qemu. The CI is a little
> > > > complicated here, lava boots the board with the new kernel and will
> > > > then trigger the openQA job. openQA will then connect to the board
> > > > using vnc to test the desktop. This is the last link that I sent to
> > > > Linus when he asked for it.
> > > > https://lava.qa.codethink.co.uk/scheduler/job/164#L1356
> > > >
> > > > And this is the lava job for today -
> > > > https://lava.qa.codethink.co.uk/scheduler/job/173
> > >
> > > Is it connected to a monitor then?
> >
> > Missed replying to this one earlier. I have a hdmi lilliput monitor
> > connected to it.
> >
> > >
> > > > > > >
> > > > > > > What defconfig are you using? How did you generate the Ubuntu image?
> > > > > > > Through debootstrap? Any additional package?
> > > >
> > > > Its the default ubuntu config. I can send you the config if you want.
> > >
> > > Yes, please.
> >
> > Attached.
> > My build script will copy this config as .config,  do olddefconfig
> > and then build.
>
> I still can't reproduce it.
>
> What other customisations did you do to that image? It looks like
> there's some customs scripts in there (test-mainline.sh), what are they
> doing?

That test script is triggering the openqa job, but its running only
after lava is able to login. The trace is appearing before the login
prompt even, so test_mainline.sh should not matter here.
The only customization done to the default ubuntu image is the initrd.
Can you please try with the initrd from
https://elisa-builder-00.iol.unh.edu/kernel/mainline/rpi4/initrd.gz..
I will check with another board also.


-- 
Regards
Sudip

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-22 10:10                       ` Sudip Mukherjee
@ 2021-09-22 11:28                         ` Maxime Ripard
  2021-09-22 17:18                           ` Sudip Mukherjee
  2021-09-22 15:22                         ` Linus Torvalds
  1 sibling, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-22 11:28 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

[-- Attachment #1: Type: text/plain, Size: 5061 bytes --]

On Wed, Sep 22, 2021 at 11:10:34AM +0100, Sudip Mukherjee wrote:
> On Wed, Sep 22, 2021 at 10:57 AM Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > On Mon, Sep 20, 2021 at 06:21:42PM +0100, Sudip Mukherjee wrote:
> > > On Mon, Sep 20, 2021 at 6:10 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > On Mon, Sep 20, 2021 at 05:35:00PM +0100, Sudip Mukherjee wrote:
> > > > > On Mon, Sep 20, 2021 at 4:53 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > >
> > > > > > On Mon, Sep 20, 2021 at 05:43:33PM +0200, Maxime Ripard wrote:
> > > > > > > On Mon, Sep 20, 2021 at 04:47:31PM +0200, Maxime Ripard wrote:
> > > > > > > > On Sat, Sep 04, 2021 at 10:40:29AM +0100, Sudip Mukherjee wrote:
> > > > > > > > > Hi Maxime,
> > > > > > > > >
> > > > > > > > > On Sat, Sep 4, 2021 at 10:10 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > > > >
> > > > > > > > > > On Fri, Sep 03, 2021 at 09:09:50PM +0100, Sudip Mukherjee wrote:
> > > > > > > > > > > Hi Maxime,
> > > > > > > > > > >
> > > > > > > > > > > On Fri, Sep 3, 2021 at 5:03 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > Hi Sudip,
> > > > > > > > > > > >
> > > > > > > > > > > > On Thu, Sep 02, 2021 at 10:08:19AM +0100, Sudip Mukherjee wrote:
> > > > > > > > > > > > > Hi All,
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > <snip>
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > You can see the complete dmesg at
> > > > > > > > > > > > > https://openqa.qa.codethink.co.uk/tests/76#step/dmesg/8
> > > > > > > > > > > >
> > > > > > > > > > > > What test were you running?
> > > > > > > > > > >
> > > > > > > > > > > Nothing particular, its just a boot test that we do every night after
> > > > > > > > > > > pulling from torvalds/linux.git
> > > > > > > > > >
> > > > > > > > > > What are you booting to then?
> > > > > > > > >
> > > > > > > > > I am not sure I understood the question.
> > > > > > > > > Its an Ubuntu image. The desktop environment is gnome. And as
> > > > > > > > > mentioned earlier, we use the HEAD of linus tree every night to boot
> > > > > > > > > the rpi4 and test that we can login via desktop environment and that
> > > > > > > > > there is no regression in dmesg.
> > > > > > > >
> > > > > > > > Looking at the CI, this isn't from a RPi but from qemu?
> > > > >
> > > > > No, this is from rpi4 board (4GB), not qemu. The CI is a little
> > > > > complicated here, lava boots the board with the new kernel and will
> > > > > then trigger the openQA job. openQA will then connect to the board
> > > > > using vnc to test the desktop. This is the last link that I sent to
> > > > > Linus when he asked for it.
> > > > > https://lava.qa.codethink.co.uk/scheduler/job/164#L1356
> > > > >
> > > > > And this is the lava job for today -
> > > > > https://lava.qa.codethink.co.uk/scheduler/job/173
> > > >
> > > > Is it connected to a monitor then?
> > >
> > > Missed replying to this one earlier. I have a hdmi lilliput monitor
> > > connected to it.
> > >
> > > >
> > > > > > > >
> > > > > > > > What defconfig are you using? How did you generate the Ubuntu image?
> > > > > > > > Through debootstrap? Any additional package?
> > > > >
> > > > > Its the default ubuntu config. I can send you the config if you want.
> > > >
> > > > Yes, please.
> > >
> > > Attached.
> > > My build script will copy this config as .config,  do olddefconfig
> > > and then build.
> >
> > I still can't reproduce it.
> >
> > What other customisations did you do to that image? It looks like
> > there's some customs scripts in there (test-mainline.sh), what are they
> > doing?
> 
> That test script is triggering the openqa job, but its running only
> after lava is able to login. The trace is appearing before the login
> prompt even, so test_mainline.sh should not matter here.
> The only customization done to the default ubuntu image is the initrd.
> Can you please try with the initrd from
> https://elisa-builder-00.iol.unh.edu/kernel/mainline/rpi4/initrd.gz..
> I will check with another board also.

Still works fine (and it required some mangling of the kernel command line).

If we summarize:

  - You initially just dumped a panic and a link to your QA, without any
    more context:

  - Then stating that you're not doing any test, really;

  - Well, except for booting Ubuntu, but no other modification

  - But you're not booting the standard image

  - And with a custom initrd

  - And that QA link states that you're booting from QEMU, but you're
    not.

Please provide a full documentation on what you're doing to generate
that image, from scratch, in order to get that panic you reported
previously.

I've spent an entire day trying to make sense of what you're doing
exactly to get into that situation. I have other things to work on and I
don't plan on figuring out any random CI system.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-22 10:10                       ` Sudip Mukherjee
  2021-09-22 11:28                         ` Maxime Ripard
@ 2021-09-22 15:22                         ` Linus Torvalds
  2021-09-22 17:02                           ` Sudip Mukherjee
  1 sibling, 1 reply; 27+ messages in thread
From: Linus Torvalds @ 2021-09-22 15:22 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Maxime Ripard, Emma Anholt, David Airlie, Daniel Vetter,
	Philipp Zabel, dri-devel, linux-kernel

On Wed, Sep 22, 2021 at 3:11 AM Sudip Mukherjee
<sudipm.mukherjee@gmail.com> wrote:
>
> That test script is triggering the openqa job, but its running only
> after lava is able to login. The trace is appearing before the login
> prompt even, so test_mainline.sh should not matter here.

Side note: the traces might be more legible if you have debug info in
the kernel, and run the dmesg through the script in

  scripts/decode_stacktrace.sh

which should give line numbers and inlining information.

That often makes it much easier to see which access it is that hits a
NULL pointer dereference.

On x86-64, generally just decode the instruction stream, and look at
the instruction patterns and try to figure out where an oops is coming
from, but that's much less useful on arm64 (partly because I'm not as
used to it, but because the arm64 oopses don't print out much of the
instructions so there's often little to go by).

         Linus

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-22 15:22                         ` Linus Torvalds
@ 2021-09-22 17:02                           ` Sudip Mukherjee
  2021-09-22 18:23                             ` Linus Torvalds
  0 siblings, 1 reply; 27+ messages in thread
From: Sudip Mukherjee @ 2021-09-22 17:02 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Maxime Ripard, Emma Anholt, David Airlie, Daniel Vetter,
	Philipp Zabel, dri-devel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 810 bytes --]

On Wed, Sep 22, 2021 at 4:25 PM Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> On Wed, Sep 22, 2021 at 3:11 AM Sudip Mukherjee
> <sudipm.mukherjee@gmail.com> wrote:
> >
> > That test script is triggering the openqa job, but its running only
> > after lava is able to login. The trace is appearing before the login
> > prompt even, so test_mainline.sh should not matter here.
>
> Side note: the traces might be more legible if you have debug info in
> the kernel, and run the dmesg through the script in
>
>   scripts/decode_stacktrace.sh
>
> which should give line numbers and inlining information.

Attached is a complete dmesg and also the decoded trace.
This is done on 4357f03d6611 ("Merge tag 'pm-5.15-rc2' of
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm")


-- 
Regards
Sudip

[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 41362 bytes --]

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.15.0-rc1-4357f03d6611 (smukherjee@db7e030c489f) (aarch64-linux-gcc (GCC) 11.2.1 20210911, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Wed Sep 22 15:18:16 UTC 2021
[    0.000000] Machine model: Raspberry Pi 4 Model B
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000032800000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[    0.000000] percpu: Embedded 29 pages/cpu s80344 r8192 d30248 u118784
[    0.000000] pcpu-alloc: s80344 r8192 d30248 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v3a
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 996912
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:BC:4B:41 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 root=LABEL=writable1 rootfstype=ext4 elevator=deadline rootwait fixrtc loglevel=7 ip=dhcp
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Unknown command line parameters: fixrtc
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x000000002e800000-0x0000000032800000] (64MB)
[    0.000000] Memory: 3742168K/4050944K available (12928K kernel code, 1960K rwdata, 4868K rodata, 4352K init, 843K bss, 243240K reserved, 65536K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x4e0 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 40527 entries in 159 pages
[    0.000000] ftrace: allocated 159 pages with 6 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000189] Console: colour dummy device 80x25
[    0.000266] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000294] pid_max: default: 32768 minimum: 301
[    0.000485] LSM: Security Framework initializing
[    0.000549] Yama: becoming mindful.
[    0.000663] AppArmor: AppArmor initialized
[    0.000862] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000932] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.003978] rcu: Hierarchical SRCU implementation.
[    0.005401] EFI services will not be available.
[    0.006275] smp: Bringing up secondary CPUs ...
[    0.007352] Detected PIPT I-cache on CPU1
[    0.007421] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.008690] Detected PIPT I-cache on CPU2
[    0.008738] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.009888] Detected PIPT I-cache on CPU3
[    0.009936] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.010094] smp: Brought up 1 node, 4 CPUs
[    0.010141] SMP: Total of 4 processors activated.
[    0.010156] CPU features: detected: 32-bit EL0 Support
[    0.010169] CPU features: detected: 32-bit EL1 Support
[    0.010186] CPU features: detected: CRC32 instructions
[    0.010360] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.039406] CPU: All CPU(s) started at EL2
[    0.039488] alternatives: patching kernel code
[    0.041223] devtmpfs: initialized
[    0.048114] Registered cp15_barrier emulation handler
[    0.048155] Registered setend emulation handler
[    0.048177] KASLR disabled due to lack of seed
[    0.048401] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.048436] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.050556] pinctrl core: initialized pinctrl subsystem
[    0.051252] DMI not present or invalid.
[    0.051882] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.055013] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.055312] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.056131] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.056201] audit: initializing netlink subsys (disabled)
[    0.056457] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1
[    0.057011] thermal_sys: Registered thermal governor 'fair_share'
[    0.057024] thermal_sys: Registered thermal governor 'bang_bang'
[    0.057040] thermal_sys: Registered thermal governor 'step_wise'
[    0.057054] thermal_sys: Registered thermal governor 'user_space'
[    0.057312] cpuidle: using governor ladder
[    0.057373] cpuidle: using governor menu
[    0.057708] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.057884] ASID allocator initialised with 65536 entries
[    0.058100] Serial: AMBA PL011 UART driver
[    0.118568] iommu: Default domain type: Translated 
[    0.118596] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.119843] SCSI subsystem initialized
[    0.120097] libata version 3.00 loaded.
[    0.120277] usbcore: registered new interface driver usbfs
[    0.120331] usbcore: registered new interface driver hub
[    0.120401] usbcore: registered new device driver usb
[    0.120756] pps_core: LinuxPPS API ver. 1 registered
[    0.120772] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.120808] PTP clock support registered
[    0.121183] EDAC MC: Ver: 3.0.0
[    0.122568] NetLabel: Initializing
[    0.122588] NetLabel:  domain hash size = 128
[    0.122603] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.122691] NetLabel:  unlabeled traffic allowed by default
[    0.123642] clocksource: Switched to clocksource arch_sys_counter
[    0.212886] VFS: Disk quotas dquot_6.6.0
[    0.212993] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.213738] AppArmor: AppArmor Filesystem Enabled
[    0.214091] simple-framebuffer 3e843000.framebuffer: framebuffer at 0x3e843000, 0x384000 bytes
[    0.214117] simple-framebuffer 3e843000.framebuffer: format=a8r8g8b8, mode=1280x720x32, linelength=5120
[    0.224129] Console: switching to colour frame buffer device 160x45
[    0.232869] simple-framebuffer 3e843000.framebuffer: fb0: simplefb registered!
[    0.243193] NET: Registered PF_INET protocol family
[    0.243712] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.246755] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.246812] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.247102] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.247591] TCP: Hash tables configured (established 32768 bind 32768)
[    0.248090] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.248217] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.248278] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.248994] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.249036] NET: Registered PF_XDP protocol family
[    0.249062] PCI: CLS 0 bytes, default 64
[    0.249369] Trying to unpack rootfs image as initramfs...
[    0.250924] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.251114] kvm [1]: IPA Size Limit: 44 bits
[    0.252497] kvm [1]: vgic interrupt IRQ9
[    0.252947] kvm [1]: Hyp mode initialized successfully
[    0.255165] Initialise system trusted keyrings
[    0.255241] Key type blacklist registered
[    0.255522] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.261911] zbud: loaded
[    0.263735] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.264656] fuse: init (API version 7.34)
[    0.330459] Key type asymmetric registered
[    0.330492] Asymmetric key parser 'x509' registered
[    0.330620] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.330833] io scheduler mq-deadline registered
[    0.336685] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    0.336731] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    0.336809] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[    0.336884] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
[    0.339510] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    0.339892] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    0.339916] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.339939] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[    0.340020] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    0.340248] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.343158] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    0.343290] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0000fff 64bit]
[    0.343782] pci 0000:01:00.0: PME# supported from D0 D3cold
[    0.346548] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
[    0.346581] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    0.346623] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.346647] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    0.347225] pcieport 0000:00:00.0: PME: Signaling with IRQ 63
[    0.347696] pcieport 0000:00:00.0: AER: enabled with IRQ 63
[    0.417545] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.419939] printk: console [ttyS0] disabled
[    0.420064] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 27, base_baud = 62499999) is a 16550
[    1.478480] printk: console [ttyS0] enabled
[    1.485274] iproc-rng200 fe104000.rng: hwrng registered
[    1.491376] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.791731] loop: module loaded
[    1.795901] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.807885] libphy: Fixed MDIO Bus: probed
[    1.812559] tun: Universal TUN/TAP device driver, 1.6
[    1.818500] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.835704] libphy: bcmgenet MII bus: probed
[    6.421505] Freeing initrd memory: 71492K
[    6.459775] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    6.466867] PPP generic driver version 2.4.2
[    6.471487] usbcore: registered new interface driver lan78xx
[    6.477308] usbcore: registered new interface driver smsc95xx
[    6.483179] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.489836] ehci-pci: EHCI PCI platform driver
[    6.494414] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.500715] ohci-pci: OHCI PCI platform driver
[    6.505276] uhci_hcd: USB Universal Host Controller Interface driver
[    6.512127] mousedev: PS/2 mouse device common for all mice
[    6.518336] i2c_dev: i2c /dev entries driver
[    6.527829] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    6.534368] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    6.546884] device-mapper: uevent: version 1.0.3
[    6.551867] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    6.561307] sdhci: Secure Digital Host Controller Interface driver
[    6.567596] sdhci: Copyright(c) Pierre Ossman
[    6.572026] sdhci-pltfm: SDHCI platform and OF driver helper
[    6.579164] ledtrig-cpu: registered to indicate activity on CPUs
[    6.585835] hid: raw HID events driver (C) Jiri Kosina
[    6.591999] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    6.598427] drop_monitor: Initializing network drop monitor service
[    6.605570] NET: Registered PF_INET6 protocol family
[    6.654195] Segment Routing with IPv6
[    6.657959] RPL Segment Routing with IPv6
[    6.662108] In-situ OAM (IOAM) with IPv6
[    6.666207] NET: Registered PF_PACKET protocol family
[    6.671580] Key type dns_resolver registered
[    6.677026] registered taskstats version 1
[    6.681291] Loading compiled-in X.509 certificates
[    6.686443] zswap: loaded using pool lzo/zbud
[    6.691484] Key type ._fscrypt registered
[    6.695584] Key type .fscrypt registered
[    6.699577] Key type fscrypt-provisioning registered
[    6.717170] cryptd: max_cpu_qlen set to 1000
[    6.740554] Key type encrypted registered
[    6.744700] AppArmor: AppArmor sha1 policy hashing enabled
[    6.750320] ima: No TPM chip found, activating TPM-bypass!
[    6.755932] ima: Allocated hash algorithm: sha1
[    6.760579] ima: No architecture policies found
[    6.765282] evm: Initialising EVM extended attributes:
[    6.770512] evm: security.selinux
[    6.773888] evm: security.SMACK64
[    6.777263] evm: security.SMACK64EXEC
[    6.780990] evm: security.SMACK64TRANSMUTE
[    6.785157] evm: security.SMACK64MMAP
[    6.788883] evm: security.apparmor
[    6.792345] evm: security.ima
[    6.795357] evm: security.capability
[    6.798994] evm: HMAC attrs: 0x1
[    6.809956] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 25, base_baud = 0) is a PL011 rev2
[    6.819297] serial serial0: tty port ttyAMA0 registered
[    6.830060] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-25T12:10:40
[    7.040443] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq
[    7.106478] mmc0: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO
[    7.149504] mmc1: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[    7.159062] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[    7.167629] random: fast init done
[    7.171242] bcmgenet fd580000.ethernet eth0: Link is Down
[    7.208025] mmc0: new high speed SDIO card at address 0001
[    7.258682] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
[    7.265805] mmcblk1: mmc1:aaaa SL32G 29.7 GiB 
[    7.275988]  mmcblk1: p1 p2
[   11.267944] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   11.276314] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.291637] Sending DHCP requests ., OK
[   12.307705] IP-Config: Got DHCP answer from 172.16.103.252, my address is 172.16.100.82
[   12.315873] IP-Config: Complete:
[   12.319152]      device=eth0, hwaddr=dc:a6:32:bc:4b:41, ipaddr=172.16.100.82, mask=255.255.252.0, gw=172.16.103.254
[   12.329747]      host=172.16.100.82, domain=guest.codethink.co.uk, nis-domain=(none)
[   12.337603]      bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
[   12.337609]      nameserver0=172.16.103.254
[   12.374261] Freeing unused kernel memory: 4352K
[   12.408414] Checked W+X mappings: passed, no W+X pages found
[   12.414199] Run /init as init process
[   12.417933]   with arguments:
[   12.417939]     /init
[   12.417943]     fixrtc
[   12.417948]   with environment:
[   12.417952]     HOME=/
[   12.417956]     TERM=linux
[   13.077872] usb_phy_generic phy: supply vcc not found, using dummy regulator
[   13.156717] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[   13.168329] mc: Linux media interface: v0.10
[   13.174302] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   13.179751] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[   13.180087] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   13.187903] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
[   13.199194] videodev: Linux video capture interface: v2.00
[   13.203750] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[   13.217083] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.224677] usb usb1: Product: xHCI Host Controller
[   13.229710] usb usb1: Manufacturer: Linux 5.15.0-rc1-4357f03d6611 xhci-hcd
[   13.237174] usb usb1: SerialNumber: 0000:01:00.0
[   13.242585] hub 1-0:1.0: USB hub found
[   13.244736] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
[   13.246501] hub 1-0:1.0: 1 port detected
[   13.257693] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
[   13.259208] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   13.265249] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   13.275392] Registered IR keymap rc-cec
[   13.276773] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[   13.280532] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   13.284615] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.288647] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[   13.295541] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[   13.295874] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   13.296002] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   13.296014] cfg80211: failed to load regulatory.db
[   13.302865] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[   13.317208] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[   13.323165] bcm2835_audio bcm2835_audio: card created with 8 channels
[   13.334068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.339180] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[   13.344894] usb usb2: Product: xHCI Host Controller
[   13.359741] Bluetooth: Core ver 2.22
[   13.365896] usb usb2: Manufacturer: Linux 5.15.0-rc1-4357f03d6611 xhci-hcd
[   13.374666] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   13.378168] usb usb2: SerialNumber: 0000:01:00.0
[   13.381152] hub 2-0:1.0: USB hub found
[   13.392258] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   13.405907] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   13.409933] brcmfmac: F1 signature read @0x18000000=0x15264345
[   13.421398] hub 2-0:1.0: 4 ports detected
[   13.425779] NET: Registered PF_BLUETOOTH protocol family
[   13.432676] Registered IR keymap rc-cec
[   13.438308] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   13.445042] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input1
[   13.462296] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[   13.479667] Bluetooth: HCI device and connection manager initialized
[   13.494692] Bluetooth: HCI socket layer initialized
[   13.506187] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   13.521013] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   13.522139] Registered IR keymap rc-cec
[   13.527049] Bluetooth: L2CAP socket layer initialized
[   13.527096] Bluetooth: SCO socket layer initialized
[   13.527671] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[   13.570398] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[   13.573791] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   13.582446] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2
[   13.594277] usbcore: registered new interface driver brcmfmac
[   13.605176] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input2
[   13.634737] Bluetooth: HCI UART driver ver 2.3
[   13.659691] Bluetooth: HCI UART protocol H4 registered
[   13.678347] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[   13.687105] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   13.696507] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   13.697127] usb 1-1: Product: USB2.0 Hub
[   13.714108] hub 1-1:1.0: USB hub found
[   13.718360] Registered IR keymap rc-cec
[   13.719260] hub 1-1:1.0: 4 ports detected
[   13.722454] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   13.735321] Bluetooth: HCI UART protocol BCSP registered
[   13.735473] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input3
[   13.778237] Bluetooth: HCI UART protocol LL registered
[   13.783675] Bluetooth: HCI UART protocol ATH3K registered
[   13.808030] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[   13.819837] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   13.830762] Bluetooth: HCI UART protocol Intel registered
[   13.841137] usb 2-1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[   13.842705] Bluetooth: HCI UART protocol Broadcom registered
[   13.849766] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   13.852871] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[   13.853018] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[   13.856232] Bluetooth: HCI UART protocol QCA registered
[   13.862712] usb 2-1: Product:  SanDisk 3.2Gen1
[   13.870351] Bluetooth: HCI UART protocol AG6XX registered
[   13.881668] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   13.883178] usb 2-1: Manufacturer:  USB
[   13.884785] Bluetooth: HCI UART protocol Marvell registered
[   13.900730] Registered IR keymap rc-cec
[   13.905216] usb 2-1: SerialNumber: 03003015122520104943
[   13.909264] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   13.926997] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input4
[   13.976371] uart-pl011 fe201000.serial: no DMA platform data
[   14.006091] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   14.021620] Registered IR keymap rc-cec
[   14.023676] usb 1-1.4: new low-speed USB device number 3 using xhci_hcd
[   14.025768] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   14.042892] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input5
[   14.110295] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   14.123088] Registered IR keymap rc-cec
[   14.127354] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   14.136658] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input6
[   14.156238] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[   14.165036] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   14.173555] usb 1-1.4: Product: USB Optical Mouse
[   14.179052] usb 1-1.4: Manufacturer: Logitech
[   14.190227] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   14.211735] Registered IR keymap rc-cec
[   14.215875] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   14.220507] Bluetooth: hci0: BCM: chip id 107
[   14.225033] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input7
[   14.227315] Bluetooth: hci0: BCM: features 0x2f
[   14.240275] Bluetooth: hci0: BCM4345C0
[   14.244160] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[   14.250358] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[   14.257116] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
[   14.262423] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
[   14.595816] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   14.607713] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   14.609791] Registered IR keymap rc-cec
[   14.620059] usb-storage 2-1:1.0: USB Mass Storage device detected
[   14.620616] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   14.632960] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input8
[   14.641280] scsi host0: usb-storage 2-1:1.0
[   14.642499] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[   14.646307] usbcore: registered new interface driver usb-storage
[   14.652668] usbcore: registered new interface driver usbhid
[   14.664163] usbhid: USB HID core driver
[   14.664493] Registered IR keymap rc-cec
[   14.664593] usbcore: registered new interface driver uas
[   14.677582] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[   14.677996] input: Logitech USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C077.0001/input/input10
[   14.684226] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input9
[   14.700798] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-1.4/input0
[   14.721601] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[   14.728409] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[   14.734977] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.742367] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.749663] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.756901] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.764212] checking generic (3e843000 384000) vs hw (0 ffffffffffffffff)
[   14.764220] fb0: switching to vc4 from simple
[   14.768864] Console: switching to colour dummy device 80x25
[   14.796714] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[   14.879293] Console: switching to colour frame buffer device 160x45
[   14.902964] vc4-drm gpu: [drm] fb0: vc4 frame buffer device
[   15.652547] scsi 0:0:0:0: Direct-Access      USB      SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
[   15.661871] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   15.667682] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[   15.676590] sd 0:0:0:0: [sda] Write Protect is off
[   15.681473] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[   15.682060] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   15.726843]  sda: sda1 sda2
[   15.733192] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   16.059643] raid6: neonx8   gen()  3316 MB/s
[   16.131635] raid6: neonx8   xor()  2613 MB/s
[   16.203640] raid6: neonx4   gen()  4048 MB/s
[   16.275639] raid6: neonx4   xor()  2726 MB/s
[   16.347642] raid6: neonx2   gen()  3534 MB/s
[   16.419635] raid6: neonx2   xor()  2540 MB/s
[   16.491637] raid6: neonx1   gen()  2726 MB/s
[   16.559640] raid6: neonx1   xor()  2073 MB/s
[   16.631645] raid6: int64x8  gen()  2427 MB/s
[   16.703642] raid6: int64x8  xor()  1387 MB/s
[   16.775647] raid6: int64x4  gen()  2569 MB/s
[   16.847641] raid6: int64x4  xor()  1429 MB/s
[   16.919639] raid6: int64x2  gen()  2393 MB/s
[   16.991642] raid6: int64x2  xor()  1272 MB/s
[   17.063636] raid6: int64x1  gen()  1826 MB/s
[   17.135637] raid6: int64x1  xor()   947 MB/s
[   17.139972] raid6: using algorithm neonx4 gen() 4048 MB/s
[   17.145447] raid6: .... xor() 2726 MB/s, rmw enabled
[   17.150493] raid6: using neon recovery algorithm
[   17.156307] xor: measuring software checksum speed
[   17.162773]    8regs           :  6305 MB/sec
[   17.168602]    32regs          :  7259 MB/sec
[   17.176181]    arm64_neon      :  3128 MB/sec
[   17.180600] xor: using function: 32regs (7259 MB/sec)
[   17.186330] async_tx: api initialized (async)
[   17.331341] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no
[   17.644079] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[   17.651181] EXT4-fs (sda2): write access will be enabled during recovery
[   18.009584] EXT4-fs (sda2): recovery complete
[   18.015896] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   21.340468] systemd[1]: Inserted module 'autofs4'
[   21.375103] systemd[1]: systemd 247.3-3ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   21.399497] systemd[1]: Detected architecture arm64.
[   21.465160] systemd[1]: Set hostname to <kerneltest-desktop>.
[   21.849993] random: lvmconfig: uninitialized urandom read (4 bytes read)
[   22.044576] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[   22.356802] systemd[1]: Queued start job for default target Graphical Interface.
[   22.365474] random: systemd: uninitialized urandom read (16 bytes read)
[   22.426761] systemd[1]: Created slice system-modprobe.slice.
[   22.447814] random: systemd: uninitialized urandom read (16 bytes read)
[   22.461611] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   22.490003] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   22.522664] systemd[1]: Created slice system-systemd\x2dgrowfs.slice.
[   22.554556] systemd[1]: Created slice User and Session Slice.
[   22.576494] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   22.605147] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   22.632288] systemd[1]: Reached target Remote File Systems.
[   22.655816] systemd[1]: Reached target Slices.
[   22.676235] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   22.700459] systemd[1]: Listening on LVM2 poll daemon socket.
[   22.724399] systemd[1]: Listening on Syslog Socket.
[   22.744309] systemd[1]: Listening on fsck to fsckd communication Socket.
[   22.768146] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   22.792773] systemd[1]: Listening on Journal Audit Socket.
[   22.816312] systemd[1]: Listening on Journal Socket (/dev/log).
[   22.840421] systemd[1]: Listening on Journal Socket.
[   22.864702] systemd[1]: Listening on udev Control Socket.
[   22.888275] systemd[1]: Listening on udev Kernel Socket.
[   22.912301] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[   22.927383] systemd[1]: Mounting POSIX Message Queue File System...
[   22.961682] systemd[1]: Mounting Kernel Debug File System...
[   22.993578] systemd[1]: Mounting Kernel Trace File System...
[   23.029740] systemd[1]: Starting Journal Service...
[   23.048780] systemd[1]: Finished Availability of block devices.
[   23.076513] random: crng init done
[   23.078489] systemd[1]: Starting Set the console keyboard layout...
[   23.079989] random: 7 urandom warning(s) missed due to ratelimiting
[   23.115334] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   23.149339] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   23.184093] systemd[1]: Starting Load Kernel Module configfs...
[   23.211684] systemd[1]: Starting Load Kernel Module drm...
[   23.243905] systemd[1]: Starting Load Kernel Module fuse...
[   23.270339] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   23.287137] systemd[1]: Starting Load Kernel Modules...
[   23.311327] lp: driver loaded but no devices found
[   23.313250] systemd[1]: Starting Remount Root and Kernel File Systems...
[   23.329339] ppdev: user-space parallel port driver
[   23.338374] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.
[   23.350722] systemd[1]: Starting Coldplug All udev Devices...
[   23.377033] systemd[1]: Starting Uncomplicated firewall...
[   23.407288] systemd[1]: Started Journal Service.
[   23.745714] Adding 1048572k swap on /swapfile.  Priority:-2 extents:3 across:5660696k FS
[   23.812625] EXT4-fs (sda2): resizing filesystem from 3688110 to 3688110 blocks
[   23.842068] systemd-journald[986]: Received client request to flush runtime journal.
[   23.867781] systemd-journald[986]: File /var/log/journal/94d1c25fd5ff400f86348b0f36fb2b44/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   24.347314] loop0: detected capacity change from 0 to 8
[   24.373215] loop1: detected capacity change from 0 to 100160
[   24.414511] loop2: detected capacity change from 0 to 100152
[   24.434595] loop3: detected capacity change from 0 to 404848
[   24.452485] loop4: detected capacity change from 0 to 404624
[   24.487413] loop5: detected capacity change from 0 to 133320
[   24.511447] loop6: detected capacity change from 0 to 133552
[   24.540373] loop7: detected capacity change from 0 to 98960
[   24.577924] loop8: detected capacity change from 0 to 98864
[   24.606915] loop9: detected capacity change from 0 to 57496
[   24.630328] loop10: detected capacity change from 0 to 57496
[   34.742540] audit: type=1400 audit(1632323186.167:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1238 comm="apparmor_parser"
[   34.746157] audit: type=1400 audit(1632323186.171:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1240 comm="apparmor_parser"
[   34.758071] audit: type=1400 audit(1632323186.183:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1241 comm="apparmor_parser"
[   34.794604] audit: type=1400 audit(1632323186.219:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1245 comm="apparmor_parser"
[   34.795052] audit: type=1400 audit(1632323186.219:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1245 comm="apparmor_parser"
[   34.813838] audit: type=1400 audit(1632323186.239:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1249 comm="apparmor_parser"
[   34.817710] audit: type=1400 audit(1632323186.243:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1246 comm="apparmor_parser"
[   34.817740] audit: type=1400 audit(1632323186.243:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1246 comm="apparmor_parser"
[   34.817753] audit: type=1400 audit(1632323186.243:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1246 comm="apparmor_parser"
[   34.833667] audit: type=1400 audit(1632323186.259:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1251 comm="apparmor_parser"
[   37.277692] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.277712] Bluetooth: BNEP filters: protocol multicast
[   37.277726] Bluetooth: BNEP socket layer initialized
[   37.294532] NET: Registered PF_ALG protocol family
[   39.558433] loop11: detected capacity change from 0 to 8
[   40.736798] systemd-journald[986]: File /var/log/journal/94d1c25fd5ff400f86348b0f36fb2b44/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   41.248311] kauditd_printk_skb: 29 callbacks suppressed
[   41.248326] audit: type=1400 audit(1632323192.675:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1612 comm="apparmor_parser"
[   44.332578] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000348
[   44.344243] Mem abort info:
[   44.347109]   ESR = 0x96000004
[   44.350265]   EC = 0x25: DABT (current EL), IL = 32 bits
[   44.355708]   SET = 0, FnV = 0
[   44.358833]   EA = 0, S1PTW = 0
[   44.362077]   FSC = 0x04: level 0 translation fault
[   44.367061] Data abort info:
[   44.370007]   ISV = 0, ISS = 0x00000004
[   44.373925]   CM = 0, WnR = 0
[   44.376969] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048dcf000
[   44.383584] [0000000000000348] pgd=0000000000000000, p4d=0000000000000000
[   44.390580] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   44.396238] Modules linked in: overlay algif_hash algif_skcipher af_alg bnep sch_fq_codel ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic uas usbhid usb_storage snd_soc_hdmi_codec hci_uart btsdio btqca btrtl btbcm btintel bcm2835_v4l2(C) bcm2835_mmal_vchiq(C) videobuf2_vmalloc brcmfmac brcmutil videobuf2_memops videobuf2_v4l2 crct10dif_ce dwc2 bluetooth videobuf2_common raspberrypi_hwmon cfg80211 snd_bcm2835(C) ecdh_generic i2c_brcmstb videodev udc_core ecc roles vc4 xhci_pci xhci_pci_renesas mc pwm_bcm2835 drm_kms_helper cec drm snd_soc_core ac97_bus phy_generic snd_pcm_dmaengine snd_pcm snd_timer snd uio_pdrv_genirq fb_sys_fops uio syscopyarea sysfillrect sysimgblt aes_neon_bs aes_neon_blk crypto_simd cryptd
[   44.475990] CPU: 0 PID: 1587 Comm: pulseaudio Tainted: G         C        5.15.0-rc1-4357f03d6611 #1
[   44.485252] Hardware name: Raspberry Pi 4 Model B (DT)
[   44.490456] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   44.497513] pc : vc4_hdmi_audio_prepare+0x3c0/0xba4 [vc4]
[   44.503013] lr : vc4_hdmi_audio_prepare+0x308/0xba4 [vc4]
[   44.508501] sp : ffff800012673a60
[   44.511854] x29: ffff800012673a60 x28: ffff0000570bc400 x27: 0000000000000000
[   44.519091] x26: 0000000000000000 x25: 000000000000ac44 x24: 0000000021002003
[   44.526328] x23: ffff800012673b50 x22: 0000000000000003 x21: ffff000057fb8080
[   44.533563] x20: ffff000057fb84c8 x19: 0005833333380600 x18: 0000000000000000
[   44.540799] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   44.548034] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000991
[   44.555269] x11: 0000000000000001 x10: 000000000001d4c0 x9 : ffff800008f66838
[   44.562506] x8 : 0000000000000031 x7 : 000000000001d4c0 x6 : 0000000000000030
[   44.569741] x5 : ffff800012673aa8 x4 : ffff800008f7ab60 x3 : 0000000010624dd3
[   44.576976] x2 : 00000000000003e8 x1 : 0000000000000000 x0 : 0000000000562200
[   44.584213] Call trace:
[   44.586684]  vc4_hdmi_audio_prepare+0x3c0/0xba4 [vc4]
[   44.591820]  hdmi_codec_prepare+0xe8/0x1b0 [snd_soc_hdmi_codec]
[   44.597821]  snd_soc_pcm_dai_prepare+0x5c/0x10c [snd_soc_core]
[   44.603780]  soc_pcm_prepare+0x5c/0x130 [snd_soc_core]
[   44.609017]  snd_pcm_prepare+0x150/0x1f0 [snd_pcm]
[   44.613891]  snd_pcm_common_ioctl+0x1644/0x1d14 [snd_pcm]
[   44.619378]  snd_pcm_ioctl+0x3c/0x5c [snd_pcm]
[   44.623895]  __arm64_sys_ioctl+0xb4/0x100
[   44.627958]  invoke_syscall+0x50/0x120
[   44.631756]  el0_svc_common.constprop.0+0x180/0x1a0
[   44.636699]  do_el0_svc+0x34/0xa0
[   44.640055]  el0_svc+0x2c/0xc0
[   44.643148]  el0t_64_sync_handler+0xa4/0x12c
[   44.647473]  el0t_64_sync+0x1a4/0x1a8
[   44.651182] Code: 52807d02 72a20c43 f9400421 9ba37c13 (f941a423) 
[   44.657358] ---[ end trace 964de1cdb7c80434 ]---
[   46.250964] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   46.265791] Bridge firewalling registered
[   47.001727] Initializing XFRM netlink socket
[   56.341437] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   57.062829] rfkill: input handler disabled

[-- Attachment #3: converted_trace --]
[-- Type: application/octet-stream, Size: 5142 bytes --]

[   44.332578] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000348
[   44.344243] Mem abort info:
[   44.347109]   ESR = 0x96000004
[   44.350265]   EC = 0x25: DABT (current EL), IL = 32 bits
[   44.355708]   SET = 0, FnV = 0
[   44.358833]   EA = 0, S1PTW = 0
[   44.362077]   FSC = 0x04: level 0 translation fault
[   44.367061] Data abort info:
[   44.370007]   ISV = 0, ISS = 0x00000004
[   44.373925]   CM = 0, WnR = 0
[   44.376969] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048dcf000
[   44.383584] [0000000000000348] pgd=0000000000000000, p4d=0000000000000000
[   44.390580] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   44.396238] Modules linked in: overlay algif_hash algif_skcipher af_alg bnep sch_fq_codel ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic uas usbhid usb_storage snd_soc_hdmi_codec hci_uart btsdio btqca btrtl btbcm btintel bcm2835_v4l2(C) bcm2835_mmal_vchiq(C) videobuf2_vmalloc brcmfmac brcmutil videobuf2_memops videobuf2_v4l2 crct10dif_ce dwc2 bluetooth videobuf2_common raspberrypi_hwmon cfg80211 snd_bcm2835(C) ecdh_generic i2c_brcmstb videodev udc_core ecc roles vc4 xhci_pci xhci_pci_renesas mc pwm_bcm2835 drm_kms_helper cec drm snd_soc_core ac97_bus phy_generic snd_pcm_dmaengine snd_pcm snd_timer snd uio_pdrv_genirq fb_sys_fops uio syscopyarea sysfillrect sysimgblt aes_neon_bs aes_neon_blk crypto_simd cryptd
[   44.475990] CPU: 0 PID: 1587 Comm: pulseaudio Tainted: G         C        5.15.0-rc1-4357f03d6611 #1
[   44.485252] Hardware name: Raspberry Pi 4 Model B (DT)
[   44.490456] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   44.497513] pc : vc4_hdmi_audio_prepare (/src/linuxtest/drivers/gpu/drm/vc4/vc4_hdmi.c:1214 /src/linuxtest/drivers/gpu/drm/vc4/vc4_hdmi.c:1398) vc4
[   44.503013] lr : vc4_hdmi_audio_prepare (/src/linuxtest/drivers/gpu/drm/vc4/vc4_hdmi_regs.h:438 /src/linuxtest/drivers/gpu/drm/vc4/vc4_hdmi.c:1396) vc4
[   44.508501] sp : ffff800012673a60
[   44.511854] x29: ffff800012673a60 x28: ffff0000570bc400 x27: 0000000000000000
[   44.519091] x26: 0000000000000000 x25: 000000000000ac44 x24: 0000000021002003
[   44.526328] x23: ffff800012673b50 x22: 0000000000000003 x21: ffff000057fb8080
[   44.533563] x20: ffff000057fb84c8 x19: 0005833333380600 x18: 0000000000000000
[   44.540799] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   44.548034] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000991
[   44.555269] x11: 0000000000000001 x10: 000000000001d4c0 x9 : ffff800008f66838
[   44.562506] x8 : 0000000000000031 x7 : 000000000001d4c0 x6 : 0000000000000030
[   44.569741] x5 : ffff800012673aa8 x4 : ffff800008f7ab60 x3 : 0000000010624dd3
[   44.576976] x2 : 00000000000003e8 x1 : 0000000000000000 x0 : 0000000000562200
[   44.584213] Call trace:
[   44.586684] vc4_hdmi_audio_prepare (/src/linuxtest/drivers/gpu/drm/vc4/vc4_hdmi.c:1214 /src/linuxtest/drivers/gpu/drm/vc4/vc4_hdmi.c:1398) vc4
[   44.591820] hdmi_codec_prepare (/src/linuxtest/sound/soc/codecs/hdmi-codec.c:597) snd_soc_hdmi_codec
[   44.597821] snd_soc_pcm_dai_prepare (/src/linuxtest/sound/soc/soc-dai.c:620) snd_soc_core
[   44.603780] soc_pcm_prepare (/src/linuxtest/sound/soc/soc-pcm.c:835) snd_soc_core
[   44.609017] snd_pcm_prepare (/src/linuxtest/sound/core/pcm_native.c:1887 /src/linuxtest/sound/core/pcm_native.c:1227 /src/linuxtest/sound/core/pcm_native.c:1343 /src/linuxtest/sound/core/pcm_native.c:1935) snd_pcm
[   44.613891] snd_pcm_common_ioctl (/src/linuxtest/sound/core/pcm_native.c:3258) snd_pcm
[   44.619378] snd_pcm_ioctl (/src/linuxtest/sound/core/pcm_native.c:3327) snd_pcm
[   44.623895] __arm64_sys_ioctl (/src/linuxtest/fs/ioctl.c:52 /src/linuxtest/fs/ioctl.c:874 /src/linuxtest/fs/ioctl.c:860 /src/linuxtest/fs/ioctl.c:860) 
[   44.627958] invoke_syscall (/src/linuxtest/./arch/arm64/include/asm/current.h:19 /src/linuxtest/arch/arm64/kernel/syscall.c:57) 
[   44.631756] el0_svc_common.constprop.0 (/src/linuxtest/arch/arm64/kernel/syscall.c:158) 
[   44.636699] do_el0_svc (/src/linuxtest/arch/arm64/kernel/syscall.c:182) 
[   44.640055] el0_svc (/src/linuxtest/./arch/arm64/include/asm/daifflags.h:28 /src/linuxtest/arch/arm64/kernel/entry-common.c:129 /src/linuxtest/arch/arm64/kernel/entry-common.c:138 /src/linuxtest/arch/arm64/kernel/entry-common.c:596) 
[   44.643148] el0t_64_sync_handler (/src/linuxtest/arch/arm64/kernel/entry-common.c:614) 
[   44.647473] el0t_64_sync (/src/linuxtest/arch/arm64/kernel/entry.S:572) 
[ 44.651182] Code: 52807d02 72a20c43 f9400421 9ba37c13 (f941a423)
All code
========
   0:	52807d02 	.word	0x52807d02
   4:	72a20c43 	.word	0x72a20c43
   8:	f9400421 	.word	0xf9400421
   c:	9ba37c13 	.word	0x9ba37c13
  10:*	f941a423 	.word	0xf941a423		<-- trapping instruction

Code starting with the faulting instruction
===========================================
   0:	f941a423 	.word	0xf941a423
[   44.657358] ---[ end trace 964de1cdb7c80434 ]---

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-22 11:28                         ` Maxime Ripard
@ 2021-09-22 17:18                           ` Sudip Mukherjee
  0 siblings, 0 replies; 27+ messages in thread
From: Sudip Mukherjee @ 2021-09-22 17:18 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Emma Anholt, David Airlie, Daniel Vetter, Philipp Zabel,
	dri-devel, linux-kernel, Linus Torvalds

On Wed, Sep 22, 2021 at 12:28 PM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Wed, Sep 22, 2021 at 11:10:34AM +0100, Sudip Mukherjee wrote:
> > On Wed, Sep 22, 2021 at 10:57 AM Maxime Ripard <maxime@cerno.tech> wrote:
> > >

<snip>

>
> Still works fine (and it required some mangling of the kernel command line).
>
> If we summarize:
>
>   - You initially just dumped a panic and a link to your QA, without any
>     more context:

The SHA was also given, and I didn't know what else you would need.
The openQA link was given to show the dmesg.

>
>   - Then stating that you're not doing any test, really;

Yes, and I still say that, its just a boot test.

>
>   - Well, except for booting Ubuntu, but no other modification
>
>   - But you're not booting the standard image
>
>   - And with a custom initrd

yes, something which has always worked in boot-testing LTS kernel or
mainline kernel.

>
>   - And that QA link states that you're booting from QEMU, but you're
>     not.

I only found that the "WORKER_CLASS" has the name "qemu_rpi4", that is
a name which I choose to give as that worker laptop is connected to
rpi4 and also running qemu tests. If you want I can change the name of
the WORKER_CLASS. :)
iiuc, dmesg shows if its booting in a qemu or on a real hardware.

>
> Please provide a full documentation on what you're doing to generate
> that image, from scratch, in order to get that panic you reported
> previously.

I have now ordered another rpi4 board and will create the image from
scratch and give you the steps.

>
> I've spent an entire day trying to make sense of what you're doing
> exactly to get into that situation. I have other things to work on and I
> don't plan on figuring out any random CI system.

I am not really sure why you are trying to figure out a random CI
system. I can reproduce the problem in our setup everytime I test with
that reverted commit and I have already said I am happy to test with a
debug patch or anything else.


-- 
Regards
Sudip

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-22 17:02                           ` Sudip Mukherjee
@ 2021-09-22 18:23                             ` Linus Torvalds
  2021-09-22 20:19                               ` Sudip Mukherjee
  0 siblings, 1 reply; 27+ messages in thread
From: Linus Torvalds @ 2021-09-22 18:23 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Maxime Ripard, Emma Anholt, David Airlie, Daniel Vetter,
	Philipp Zabel, dri-devel, linux-kernel

On Wed, Sep 22, 2021 at 10:02 AM Sudip Mukherjee
<sudipm.mukherjee@gmail.com> wrote:
>
>
> Attached is a complete dmesg and also the decoded trace.
> This is done on 4357f03d6611 ("Merge tag 'pm-5.15-rc2' of
> git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm")

drivers/gpu/drm/vc4/vc4_hdmi.c:1214 is

        tmp = (u64)(mode->clock * 1000) * n;

in vc4_hdmi_set_n_cts(), which has apparently been inlined from
vc4_hdmi_audio_prepare() in vc4_hdmi.c:1398.

So it looks like 'mode' is some offset off a NULL pointer.

Which looks not impossible:

  1207          struct drm_connector *connector = &vc4_hdmi->connector;
  1208          struct drm_crtc *crtc = connector->state->crtc;
  1209          const struct drm_display_mode *mode =
&crtc->state->adjusted_mode;

looks like crtc->state perhaps might be NULL.

Although it's entirely possible that it's 'crtc' itself that is NULL
or one of the earlier indirection accesses.

The exact line information from the debug info is very useful and
mostly correct, but at the same time should always be taken with a
small pinch of salt.

Compiler optimizations means that code gets munged and moved around,
and since this is the first access to 'mode', I would not be surprised
if some of the calculations and accesses to get 'mode' might be moved
around to it.

               Linus

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-22 18:23                             ` Linus Torvalds
@ 2021-09-22 20:19                               ` Sudip Mukherjee
  2021-09-22 20:25                                 ` Linus Torvalds
  0 siblings, 1 reply; 27+ messages in thread
From: Sudip Mukherjee @ 2021-09-22 20:19 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Maxime Ripard, Emma Anholt, David Airlie, Daniel Vetter,
	Philipp Zabel, dri-devel, linux-kernel

On Wed, Sep 22, 2021 at 7:23 PM Linus Torvalds
<torvalds@linux-foundation.org> wrote:
>
> On Wed, Sep 22, 2021 at 10:02 AM Sudip Mukherjee
> <sudipm.mukherjee@gmail.com> wrote:
> >
> >
> > Attached is a complete dmesg and also the decoded trace.
> > This is done on 4357f03d6611 ("Merge tag 'pm-5.15-rc2' of
> > git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm")
>
> drivers/gpu/drm/vc4/vc4_hdmi.c:1214 is
>
>         tmp = (u64)(mode->clock * 1000) * n;
>
> in vc4_hdmi_set_n_cts(), which has apparently been inlined from
> vc4_hdmi_audio_prepare() in vc4_hdmi.c:1398.
>
> So it looks like 'mode' is some offset off a NULL pointer.
>
> Which looks not impossible:
>
>   1207          struct drm_connector *connector = &vc4_hdmi->connector;
>   1208          struct drm_crtc *crtc = connector->state->crtc;
>   1209          const struct drm_display_mode *mode =
> &crtc->state->adjusted_mode;
>
> looks like crtc->state perhaps might be NULL.

I added some debugs to print the addresses, and I am getting:
[   38.813809] sudip crtc 0000000000000000

This is from struct drm_crtc *crtc = connector->state->crtc;

connector and connector->state had valid addresses.
[   38.805302] sudip connector ffff000040bac578
[   38.809779] sudip state ffff000057eb5400

This is the diff of the debug I added:
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 4a1115043114..2a8f06948094 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1205,11 +1205,20 @@ static void
vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi,
 static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi, unsigned
int samplerate)
 {
        struct drm_connector *connector = &vc4_hdmi->connector;
-       struct drm_crtc *crtc = connector->state->crtc;
-       const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+       struct drm_crtc *crtc;
+       struct drm_display_mode *mode;
        u32 n, cts;
        u64 tmp;

+
+       pr_err("sudip connector %px\n", connector);
+       pr_err("sudip state %px\n", connector->state);
+       crtc = connector->state->crtc;
+
+       pr_err("sudip crtc %px\n", crtc);
+       pr_err("sudip state %px\n", crtc->state);
+       pr_err("state mode %px\n", &crtc->state->adjusted_mode);
+       mode = &crtc->state->adjusted_mode;
        n = 128 * samplerate / 1000;
        tmp = (u64)(mode->clock * 1000) * n;
        do_div(tmp, 128 * samplerate);


-- 
Regards
Sudip

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-22 20:19                               ` Sudip Mukherjee
@ 2021-09-22 20:25                                 ` Linus Torvalds
  2021-09-24 13:30                                   ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Linus Torvalds @ 2021-09-22 20:25 UTC (permalink / raw)
  To: Sudip Mukherjee
  Cc: Maxime Ripard, Emma Anholt, David Airlie, Daniel Vetter,
	Philipp Zabel, dri-devel, linux-kernel

On Wed, Sep 22, 2021 at 1:19 PM Sudip Mukherjee
<sudipm.mukherjee@gmail.com> wrote:
>
> I added some debugs to print the addresses, and I am getting:
> [   38.813809] sudip crtc 0000000000000000
>
> This is from struct drm_crtc *crtc = connector->state->crtc;

Yeah, that was my personal suspicion, because while the line number
implied "crtc->state" being NULL, the drm data structure documentation
and other drivers both imply that "crtc" was the more likely one.

I suspect a simple

        if (!crtc)
                return;

in vc4_hdmi_set_n_cts() is at least part of the fix for this all, but
I didn't check if there is possibly something else that needs to be
done too.

                Linus

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-22 20:25                                 ` Linus Torvalds
@ 2021-09-24 13:30                                   ` Maxime Ripard
  2021-09-24 22:50                                     ` Daniel Vetter
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-24 13:30 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Sudip Mukherjee, Emma Anholt, David Airlie, Daniel Vetter,
	Philipp Zabel, dri-devel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2548 bytes --]

On Wed, Sep 22, 2021 at 01:25:21PM -0700, Linus Torvalds wrote:
> On Wed, Sep 22, 2021 at 1:19 PM Sudip Mukherjee
> <sudipm.mukherjee@gmail.com> wrote:
> >
> > I added some debugs to print the addresses, and I am getting:
> > [   38.813809] sudip crtc 0000000000000000
> >
> > This is from struct drm_crtc *crtc = connector->state->crtc;
> 
> Yeah, that was my personal suspicion, because while the line number
> implied "crtc->state" being NULL, the drm data structure documentation
> and other drivers both imply that "crtc" was the more likely one.
> 
> I suspect a simple
> 
>         if (!crtc)
>                 return;
> 
> in vc4_hdmi_set_n_cts() is at least part of the fix for this all, but
> I didn't check if there is possibly something else that needs to be
> done too.

Thanks for the decode_stacktrace.sh and the follow-up

Yeah, it looks like we have several things wrong here:

  * we only check that connector->state is set, and not
    connector->state->crtc indeed.

  * We also check only in startup(), so at open() and not later on when
    the sound streaming actually start. This has been there for a while,
    so I guess it's never really been causing a practical issue before.

I'm still not entirely sure how we can end up in that situation though.
The only case I could think of is that:

  * The firmware enables the HDMI controller, then boots Linux

  * The driver starts, registers its audio card. connector->state is
    NULL then, and if the HDMI monitor is actually an HDMI monitor (vs a
    DVI monitor), the VC4_HDMI_RAM_PACKET_ENABLE bit that we test in
    startup will be set.

  * The driver will create the connector->state (through a call to
    drm_mode_config_reset in vc4_kms_load), connector->state isn't NULL
    anymore, VC4_HDMI_RAM_PACKET_ENABLE is still set.

  * The driver then disables the HDMI controller (in
    vc4_crtc_disable_at_boot) but never clears the
    VC4_HDMI_RAM_PACKET_ENABLE bit.

  * Pulseaudio opens the audio device, startup succeeds because both
    conditions we test succeed.

  * However, since we either never enabled the HDMI connector (or if it
    was disabled at some point), connector->state->crtc is NULL and we
    get our NULL pointer dereference.

    The Ubuntu configuration has the framebuffer emulation and the
    framebuffer console enabled, so it's likely to be enabled and
    something (X.org?) comes along and disables the connector right when
    pulseaudio calls prepare().

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-24 13:30                                   ` Maxime Ripard
@ 2021-09-24 22:50                                     ` Daniel Vetter
  2021-09-28  8:34                                       ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Daniel Vetter @ 2021-09-24 22:50 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Linus Torvalds, Sudip Mukherjee, Emma Anholt, David Airlie,
	Philipp Zabel, dri-devel, linux-kernel

On Fri, Sep 24, 2021 at 3:30 PM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Wed, Sep 22, 2021 at 01:25:21PM -0700, Linus Torvalds wrote:
> > On Wed, Sep 22, 2021 at 1:19 PM Sudip Mukherjee
> > <sudipm.mukherjee@gmail.com> wrote:
> > >
> > > I added some debugs to print the addresses, and I am getting:
> > > [   38.813809] sudip crtc 0000000000000000
> > >
> > > This is from struct drm_crtc *crtc = connector->state->crtc;
> >
> > Yeah, that was my personal suspicion, because while the line number
> > implied "crtc->state" being NULL, the drm data structure documentation
> > and other drivers both imply that "crtc" was the more likely one.
> >
> > I suspect a simple
> >
> >         if (!crtc)
> >                 return;
> >
> > in vc4_hdmi_set_n_cts() is at least part of the fix for this all, but
> > I didn't check if there is possibly something else that needs to be
> > done too.
>
> Thanks for the decode_stacktrace.sh and the follow-up
>
> Yeah, it looks like we have several things wrong here:
>
>   * we only check that connector->state is set, and not
>     connector->state->crtc indeed.
>
>   * We also check only in startup(), so at open() and not later on when
>     the sound streaming actually start. This has been there for a while,
>     so I guess it's never really been causing a practical issue before.

You also have no locking, plus looking at ->state objects outside of
atomic commit machinery makes no sense because you're not actually in
sync with the hw state. Relevant bits need to be copied over at commit
time, protected by some spinlock (and that spinlock also needs to be
held over whatever other stuff you're setting to make sure we don't
get a funny out-of-sync state anywhere).

Liberally sprinkling a few NULL checks here doesn't fix much at all,
it only papers over design bugs in the code.
-Daniel


> I'm still not entirely sure how we can end up in that situation though.
> The only case I could think of is that:
>
>   * The firmware enables the HDMI controller, then boots Linux
>
>   * The driver starts, registers its audio card. connector->state is
>     NULL then, and if the HDMI monitor is actually an HDMI monitor (vs a
>     DVI monitor), the VC4_HDMI_RAM_PACKET_ENABLE bit that we test in
>     startup will be set.
>
>   * The driver will create the connector->state (through a call to
>     drm_mode_config_reset in vc4_kms_load), connector->state isn't NULL
>     anymore, VC4_HDMI_RAM_PACKET_ENABLE is still set.
>
>   * The driver then disables the HDMI controller (in
>     vc4_crtc_disable_at_boot) but never clears the
>     VC4_HDMI_RAM_PACKET_ENABLE bit.
>
>   * Pulseaudio opens the audio device, startup succeeds because both
>     conditions we test succeed.
>
>   * However, since we either never enabled the HDMI connector (or if it
>     was disabled at some point), connector->state->crtc is NULL and we
>     get our NULL pointer dereference.
>
>     The Ubuntu configuration has the framebuffer emulation and the
>     framebuffer console enabled, so it's likely to be enabled and
>     something (X.org?) comes along and disables the connector right when
>     pulseaudio calls prepare().
>
> Maxime



-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-24 22:50                                     ` Daniel Vetter
@ 2021-09-28  8:34                                       ` Maxime Ripard
  2021-09-30  9:19                                         ` Daniel Vetter
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-09-28  8:34 UTC (permalink / raw)
  To: Daniel Vetter
  Cc: Linus Torvalds, Sudip Mukherjee, Emma Anholt, David Airlie,
	Philipp Zabel, dri-devel, linux-kernel

Hi Daniel,

On Sat, Sep 25, 2021 at 12:50:17AM +0200, Daniel Vetter wrote:
> On Fri, Sep 24, 2021 at 3:30 PM Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > On Wed, Sep 22, 2021 at 01:25:21PM -0700, Linus Torvalds wrote:
> > > On Wed, Sep 22, 2021 at 1:19 PM Sudip Mukherjee
> > > <sudipm.mukherjee@gmail.com> wrote:
> > > >
> > > > I added some debugs to print the addresses, and I am getting:
> > > > [   38.813809] sudip crtc 0000000000000000
> > > >
> > > > This is from struct drm_crtc *crtc = connector->state->crtc;
> > >
> > > Yeah, that was my personal suspicion, because while the line number
> > > implied "crtc->state" being NULL, the drm data structure documentation
> > > and other drivers both imply that "crtc" was the more likely one.
> > >
> > > I suspect a simple
> > >
> > >         if (!crtc)
> > >                 return;
> > >
> > > in vc4_hdmi_set_n_cts() is at least part of the fix for this all, but
> > > I didn't check if there is possibly something else that needs to be
> > > done too.
> >
> > Thanks for the decode_stacktrace.sh and the follow-up
> >
> > Yeah, it looks like we have several things wrong here:
> >
> >   * we only check that connector->state is set, and not
> >     connector->state->crtc indeed.
> >
> >   * We also check only in startup(), so at open() and not later on when
> >     the sound streaming actually start. This has been there for a while,
> >     so I guess it's never really been causing a practical issue before.
> 
> You also have no locking

Indeed. Do we just need locking to prevent a concurrent audio setup and
modeset, or do you have another corner case in mind?

Also, generally, what locks should we make sure we have locked when
accessing the connector and CRTC state? drm_mode_config.connection_mutex
and drm_mode_config.mutex, respectively?

> plus looking at ->state objects outside of atomic commit machinery
> makes no sense because you're not actually in sync with the hw state.
> Relevant bits need to be copied over at commit time, protected by some
> spinlock (and that spinlock also needs to be held over whatever other
> stuff you're setting to make sure we don't get a funny out-of-sync
> state anywhere).

If we already have a lock protecting against having both an ASoC and KMS
function running, it's not clear to me what the spinlock would prevent
here?

Maxime

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-28  8:34                                       ` Maxime Ripard
@ 2021-09-30  9:19                                         ` Daniel Vetter
  2021-10-13 15:01                                           ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Daniel Vetter @ 2021-09-30  9:19 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Daniel Vetter, Linus Torvalds, Sudip Mukherjee, Emma Anholt,
	David Airlie, Philipp Zabel, dri-devel, linux-kernel

On Tue, Sep 28, 2021 at 10:34:46AM +0200, Maxime Ripard wrote:
> Hi Daniel,
> 
> On Sat, Sep 25, 2021 at 12:50:17AM +0200, Daniel Vetter wrote:
> > On Fri, Sep 24, 2021 at 3:30 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > >
> > > On Wed, Sep 22, 2021 at 01:25:21PM -0700, Linus Torvalds wrote:
> > > > On Wed, Sep 22, 2021 at 1:19 PM Sudip Mukherjee
> > > > <sudipm.mukherjee@gmail.com> wrote:
> > > > >
> > > > > I added some debugs to print the addresses, and I am getting:
> > > > > [   38.813809] sudip crtc 0000000000000000
> > > > >
> > > > > This is from struct drm_crtc *crtc = connector->state->crtc;
> > > >
> > > > Yeah, that was my personal suspicion, because while the line number
> > > > implied "crtc->state" being NULL, the drm data structure documentation
> > > > and other drivers both imply that "crtc" was the more likely one.
> > > >
> > > > I suspect a simple
> > > >
> > > >         if (!crtc)
> > > >                 return;
> > > >
> > > > in vc4_hdmi_set_n_cts() is at least part of the fix for this all, but
> > > > I didn't check if there is possibly something else that needs to be
> > > > done too.
> > >
> > > Thanks for the decode_stacktrace.sh and the follow-up
> > >
> > > Yeah, it looks like we have several things wrong here:
> > >
> > >   * we only check that connector->state is set, and not
> > >     connector->state->crtc indeed.
> > >
> > >   * We also check only in startup(), so at open() and not later on when
> > >     the sound streaming actually start. This has been there for a while,
> > >     so I guess it's never really been causing a practical issue before.
> > 
> > You also have no locking
> 
> Indeed. Do we just need locking to prevent a concurrent audio setup and
> modeset, or do you have another corner case in mind?
> 
> Also, generally, what locks should we make sure we have locked when
> accessing the connector and CRTC state? drm_mode_config.connection_mutex
> and drm_mode_config.mutex, respectively?
> 
> > plus looking at ->state objects outside of atomic commit machinery
> > makes no sense because you're not actually in sync with the hw state.
> > Relevant bits need to be copied over at commit time, protected by some
> > spinlock (and that spinlock also needs to be held over whatever other
> > stuff you're setting to make sure we don't get a funny out-of-sync
> > state anywhere).
> 
> If we already have a lock protecting against having both an ASoC and KMS
> function running, it's not clear to me what the spinlock would prevent
> here?

Replicating the irc chat here. With

commit 6c5ed5ae353cdf156f9ac4db17e15db56b4de880
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Thu Apr 6 20:55:20 2017 +0200

    drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.

this is already taken care of for drivers and should be all good from a
locking pov.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-09-30  9:19                                         ` Daniel Vetter
@ 2021-10-13 15:01                                           ` Maxime Ripard
  2021-10-14 13:15                                             ` Daniel Vetter
  0 siblings, 1 reply; 27+ messages in thread
From: Maxime Ripard @ 2021-10-13 15:01 UTC (permalink / raw)
  To: Linus Torvalds, Sudip Mukherjee, Emma Anholt, David Airlie,
	Philipp Zabel, dri-devel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3382 bytes --]

On Thu, Sep 30, 2021 at 11:19:59AM +0200, Daniel Vetter wrote:
> On Tue, Sep 28, 2021 at 10:34:46AM +0200, Maxime Ripard wrote:
> > Hi Daniel,
> > 
> > On Sat, Sep 25, 2021 at 12:50:17AM +0200, Daniel Vetter wrote:
> > > On Fri, Sep 24, 2021 at 3:30 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > >
> > > > On Wed, Sep 22, 2021 at 01:25:21PM -0700, Linus Torvalds wrote:
> > > > > On Wed, Sep 22, 2021 at 1:19 PM Sudip Mukherjee
> > > > > <sudipm.mukherjee@gmail.com> wrote:
> > > > > >
> > > > > > I added some debugs to print the addresses, and I am getting:
> > > > > > [   38.813809] sudip crtc 0000000000000000
> > > > > >
> > > > > > This is from struct drm_crtc *crtc = connector->state->crtc;
> > > > >
> > > > > Yeah, that was my personal suspicion, because while the line number
> > > > > implied "crtc->state" being NULL, the drm data structure documentation
> > > > > and other drivers both imply that "crtc" was the more likely one.
> > > > >
> > > > > I suspect a simple
> > > > >
> > > > >         if (!crtc)
> > > > >                 return;
> > > > >
> > > > > in vc4_hdmi_set_n_cts() is at least part of the fix for this all, but
> > > > > I didn't check if there is possibly something else that needs to be
> > > > > done too.
> > > >
> > > > Thanks for the decode_stacktrace.sh and the follow-up
> > > >
> > > > Yeah, it looks like we have several things wrong here:
> > > >
> > > >   * we only check that connector->state is set, and not
> > > >     connector->state->crtc indeed.
> > > >
> > > >   * We also check only in startup(), so at open() and not later on when
> > > >     the sound streaming actually start. This has been there for a while,
> > > >     so I guess it's never really been causing a practical issue before.
> > > 
> > > You also have no locking
> > 
> > Indeed. Do we just need locking to prevent a concurrent audio setup and
> > modeset, or do you have another corner case in mind?
> > 
> > Also, generally, what locks should we make sure we have locked when
> > accessing the connector and CRTC state? drm_mode_config.connection_mutex
> > and drm_mode_config.mutex, respectively?
> > 
> > > plus looking at ->state objects outside of atomic commit machinery
> > > makes no sense because you're not actually in sync with the hw state.
> > > Relevant bits need to be copied over at commit time, protected by some
> > > spinlock (and that spinlock also needs to be held over whatever other
> > > stuff you're setting to make sure we don't get a funny out-of-sync
> > > state anywhere).
> > 
> > If we already have a lock protecting against having both an ASoC and KMS
> > function running, it's not clear to me what the spinlock would prevent
> > here?
> 
> Replicating the irc chat here. With
> 
> commit 6c5ed5ae353cdf156f9ac4db17e15db56b4de880
> Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Date:   Thu Apr 6 20:55:20 2017 +0200
> 
>     drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.
> 
> this is already taken care of for drivers and should be all good from a
> locking pov.

So, if I understand this properly, this superseeds your comment on the
spinlock for the hw state, but not the comment that we need some locking
to synchronize between the audio and KMS path (and CEC?). Right?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-10-13 15:01                                           ` Maxime Ripard
@ 2021-10-14 13:15                                             ` Daniel Vetter
  2021-10-25 14:15                                               ` Maxime Ripard
  0 siblings, 1 reply; 27+ messages in thread
From: Daniel Vetter @ 2021-10-14 13:15 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Linus Torvalds, Sudip Mukherjee, Emma Anholt, David Airlie,
	Philipp Zabel, dri-devel, linux-kernel

On Wed, Oct 13, 2021 at 05:01:03PM +0200, Maxime Ripard wrote:
> On Thu, Sep 30, 2021 at 11:19:59AM +0200, Daniel Vetter wrote:
> > On Tue, Sep 28, 2021 at 10:34:46AM +0200, Maxime Ripard wrote:
> > > Hi Daniel,
> > > 
> > > On Sat, Sep 25, 2021 at 12:50:17AM +0200, Daniel Vetter wrote:
> > > > On Fri, Sep 24, 2021 at 3:30 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > >
> > > > > On Wed, Sep 22, 2021 at 01:25:21PM -0700, Linus Torvalds wrote:
> > > > > > On Wed, Sep 22, 2021 at 1:19 PM Sudip Mukherjee
> > > > > > <sudipm.mukherjee@gmail.com> wrote:
> > > > > > >
> > > > > > > I added some debugs to print the addresses, and I am getting:
> > > > > > > [   38.813809] sudip crtc 0000000000000000
> > > > > > >
> > > > > > > This is from struct drm_crtc *crtc = connector->state->crtc;
> > > > > >
> > > > > > Yeah, that was my personal suspicion, because while the line number
> > > > > > implied "crtc->state" being NULL, the drm data structure documentation
> > > > > > and other drivers both imply that "crtc" was the more likely one.
> > > > > >
> > > > > > I suspect a simple
> > > > > >
> > > > > >         if (!crtc)
> > > > > >                 return;
> > > > > >
> > > > > > in vc4_hdmi_set_n_cts() is at least part of the fix for this all, but
> > > > > > I didn't check if there is possibly something else that needs to be
> > > > > > done too.
> > > > >
> > > > > Thanks for the decode_stacktrace.sh and the follow-up
> > > > >
> > > > > Yeah, it looks like we have several things wrong here:
> > > > >
> > > > >   * we only check that connector->state is set, and not
> > > > >     connector->state->crtc indeed.
> > > > >
> > > > >   * We also check only in startup(), so at open() and not later on when
> > > > >     the sound streaming actually start. This has been there for a while,
> > > > >     so I guess it's never really been causing a practical issue before.
> > > > 
> > > > You also have no locking
> > > 
> > > Indeed. Do we just need locking to prevent a concurrent audio setup and
> > > modeset, or do you have another corner case in mind?
> > > 
> > > Also, generally, what locks should we make sure we have locked when
> > > accessing the connector and CRTC state? drm_mode_config.connection_mutex
> > > and drm_mode_config.mutex, respectively?
> > > 
> > > > plus looking at ->state objects outside of atomic commit machinery
> > > > makes no sense because you're not actually in sync with the hw state.
> > > > Relevant bits need to be copied over at commit time, protected by some
> > > > spinlock (and that spinlock also needs to be held over whatever other
> > > > stuff you're setting to make sure we don't get a funny out-of-sync
> > > > state anywhere).
> > > 
> > > If we already have a lock protecting against having both an ASoC and KMS
> > > function running, it's not clear to me what the spinlock would prevent
> > > here?
> > 
> > Replicating the irc chat here. With
> > 
> > commit 6c5ed5ae353cdf156f9ac4db17e15db56b4de880
> > Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Date:   Thu Apr 6 20:55:20 2017 +0200
> > 
> >     drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.
> > 
> > this is already taken care of for drivers and should be all good from a
> > locking pov.
> 
> So, if I understand this properly, this superseeds your comment on the
> spinlock for the hw state, but not the comment that we need some locking
> to synchronize between the audio and KMS path (and CEC?). Right?

Other way round. There's 3 things involved here:
1. kms output probe code
2. kms atomic commit code
3. calls from asoc side

The above referenced commit makes sure 1&2 are synchronized. The problem
is that 2&3 are not synchonronized, and from 3, no matter how much locking
you have, you cannot look at kms state. I.e. not allowed to look at
crtc->state for example, irrespective of whether you're holding
drm_modeset_lock or not. This is because the atomic nonblocking commit is
done without holding any locks, protection is purely down to ownership
rules of state structures and ordering (through drm_crtc_commit) of
in-flight nonblocking atomic commits.

That's why you need a sperate lock _and_ copy state, so taht 2&3 stay in
sync.

In practice you only care about modeset changes from 2 vs anything from 3,
and most userspace does modeset atomic commits as blocking commits, which
means you won't notice that your locking has gaps.

btw same problem exists between atomic and (vblank) irq handler. There you
need a irqsafe spinlock and you also have to copy (because the irq handler
just cannot access ->state in any safe way, because it doesn't own that
structure).

This is maybe a bit the confusing thing with atomic commit: ->state isn't
protected by locks, but through ownership rules. Only for atomic check is
->state protected by locks, but once we're committed we switch over to
ownership rules for protection. swap_states() is that point of no return.

Cheers, Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: Regression with mainline kernel on rpi4
  2021-10-14 13:15                                             ` Daniel Vetter
@ 2021-10-25 14:15                                               ` Maxime Ripard
  0 siblings, 0 replies; 27+ messages in thread
From: Maxime Ripard @ 2021-10-25 14:15 UTC (permalink / raw)
  To: Linus Torvalds, Sudip Mukherjee, Emma Anholt, David Airlie,
	Philipp Zabel, dri-devel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 5550 bytes --]

Hi,

On Thu, Oct 14, 2021 at 03:15:36PM +0200, Daniel Vetter wrote:
> On Wed, Oct 13, 2021 at 05:01:03PM +0200, Maxime Ripard wrote:
> > On Thu, Sep 30, 2021 at 11:19:59AM +0200, Daniel Vetter wrote:
> > > On Tue, Sep 28, 2021 at 10:34:46AM +0200, Maxime Ripard wrote:
> > > > Hi Daniel,
> > > > 
> > > > On Sat, Sep 25, 2021 at 12:50:17AM +0200, Daniel Vetter wrote:
> > > > > On Fri, Sep 24, 2021 at 3:30 PM Maxime Ripard <maxime@cerno.tech> wrote:
> > > > > >
> > > > > > On Wed, Sep 22, 2021 at 01:25:21PM -0700, Linus Torvalds wrote:
> > > > > > > On Wed, Sep 22, 2021 at 1:19 PM Sudip Mukherjee
> > > > > > > <sudipm.mukherjee@gmail.com> wrote:
> > > > > > > >
> > > > > > > > I added some debugs to print the addresses, and I am getting:
> > > > > > > > [   38.813809] sudip crtc 0000000000000000
> > > > > > > >
> > > > > > > > This is from struct drm_crtc *crtc = connector->state->crtc;
> > > > > > >
> > > > > > > Yeah, that was my personal suspicion, because while the line number
> > > > > > > implied "crtc->state" being NULL, the drm data structure documentation
> > > > > > > and other drivers both imply that "crtc" was the more likely one.
> > > > > > >
> > > > > > > I suspect a simple
> > > > > > >
> > > > > > >         if (!crtc)
> > > > > > >                 return;
> > > > > > >
> > > > > > > in vc4_hdmi_set_n_cts() is at least part of the fix for this all, but
> > > > > > > I didn't check if there is possibly something else that needs to be
> > > > > > > done too.
> > > > > >
> > > > > > Thanks for the decode_stacktrace.sh and the follow-up
> > > > > >
> > > > > > Yeah, it looks like we have several things wrong here:
> > > > > >
> > > > > >   * we only check that connector->state is set, and not
> > > > > >     connector->state->crtc indeed.
> > > > > >
> > > > > >   * We also check only in startup(), so at open() and not later on when
> > > > > >     the sound streaming actually start. This has been there for a while,
> > > > > >     so I guess it's never really been causing a practical issue before.
> > > > > 
> > > > > You also have no locking
> > > > 
> > > > Indeed. Do we just need locking to prevent a concurrent audio setup and
> > > > modeset, or do you have another corner case in mind?
> > > > 
> > > > Also, generally, what locks should we make sure we have locked when
> > > > accessing the connector and CRTC state? drm_mode_config.connection_mutex
> > > > and drm_mode_config.mutex, respectively?
> > > > 
> > > > > plus looking at ->state objects outside of atomic commit machinery
> > > > > makes no sense because you're not actually in sync with the hw state.
> > > > > Relevant bits need to be copied over at commit time, protected by some
> > > > > spinlock (and that spinlock also needs to be held over whatever other
> > > > > stuff you're setting to make sure we don't get a funny out-of-sync
> > > > > state anywhere).
> > > > 
> > > > If we already have a lock protecting against having both an ASoC and KMS
> > > > function running, it's not clear to me what the spinlock would prevent
> > > > here?
> > > 
> > > Replicating the irc chat here. With
> > > 
> > > commit 6c5ed5ae353cdf156f9ac4db17e15db56b4de880
> > > Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > > Date:   Thu Apr 6 20:55:20 2017 +0200
> > > 
> > >     drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.
> > > 
> > > this is already taken care of for drivers and should be all good from a
> > > locking pov.
> > 
> > So, if I understand this properly, this superseeds your comment on the
> > spinlock for the hw state, but not the comment that we need some locking
> > to synchronize between the audio and KMS path (and CEC?). Right?
> 
> Other way round. There's 3 things involved here:
> 1. kms output probe code
> 2. kms atomic commit code
> 3. calls from asoc side
> 
> The above referenced commit makes sure 1&2 are synchronized. The problem
> is that 2&3 are not synchonronized, and from 3, no matter how much locking
> you have, you cannot look at kms state. I.e. not allowed to look at
> crtc->state for example, irrespective of whether you're holding
> drm_modeset_lock or not. This is because the atomic nonblocking commit is
> done without holding any locks, protection is purely down to ownership
> rules of state structures and ordering (through drm_crtc_commit) of
> in-flight nonblocking atomic commits.
> 
> That's why you need a sperate lock _and_ copy state, so taht 2&3 stay in
> sync.
> 
> In practice you only care about modeset changes from 2 vs anything from 3,
> and most userspace does modeset atomic commits as blocking commits, which
> means you won't notice that your locking has gaps.
> 
> btw same problem exists between atomic and (vblank) irq handler. There you
> need a irqsafe spinlock and you also have to copy (because the irq handler
> just cannot access ->state in any safe way, because it doesn't own that
> structure).
> 
> This is maybe a bit the confusing thing with atomic commit: ->state isn't
> protected by locks, but through ownership rules. Only for atomic check is
> ->state protected by locks, but once we're committed we switch over to
> ownership rules for protection. swap_states() is that point of no return.

Thanks for the clarifications, I just posted a series that should be
implementing this here:
https://lore.kernel.org/dri-devel/20211025141113.702757-1-maxime@cerno.tech/

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 27+ messages in thread

end of thread, other threads:[~2021-10-25 14:15 UTC | newest]

Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-02  9:08 Regression with mainline kernel on rpi4 Sudip Mukherjee
2021-09-03 16:03 ` Maxime Ripard
2021-09-03 20:09   ` Sudip Mukherjee
2021-09-04  9:10     ` Maxime Ripard
2021-09-04  9:40       ` Sudip Mukherjee
2021-09-20 14:47         ` Maxime Ripard
2021-09-20 15:43           ` Maxime Ripard
2021-09-20 15:53             ` Maxime Ripard
2021-09-20 16:35               ` Sudip Mukherjee
2021-09-20 17:10                 ` Maxime Ripard
2021-09-20 17:21                   ` Sudip Mukherjee
2021-09-22  9:57                     ` Maxime Ripard
2021-09-22 10:10                       ` Sudip Mukherjee
2021-09-22 11:28                         ` Maxime Ripard
2021-09-22 17:18                           ` Sudip Mukherjee
2021-09-22 15:22                         ` Linus Torvalds
2021-09-22 17:02                           ` Sudip Mukherjee
2021-09-22 18:23                             ` Linus Torvalds
2021-09-22 20:19                               ` Sudip Mukherjee
2021-09-22 20:25                                 ` Linus Torvalds
2021-09-24 13:30                                   ` Maxime Ripard
2021-09-24 22:50                                     ` Daniel Vetter
2021-09-28  8:34                                       ` Maxime Ripard
2021-09-30  9:19                                         ` Daniel Vetter
2021-10-13 15:01                                           ` Maxime Ripard
2021-10-14 13:15                                             ` Daniel Vetter
2021-10-25 14:15                                               ` Maxime Ripard

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).