* [PATCH v2 00/30] arm: dts: extend mt7623 support @ 2017-04-26 9:25 sean.wang 2017-04-26 9:25 ` [PATCH v2 01/30] pinctrl: mediatek: Add missing pinctrl bindings for mt7623 sean.wang ` (30 more replies) 0 siblings, 31 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Changes since v1: Continue the upstream journey based on the previous John Crispin's good work. - add fixes for the v1 suggestion - fix typo in the commit log - add missing pinctrl bindings for mt7623 - reuse pinctrl driver for mt7623 - enhance existing nodes since the way for binding is changed e.g USB - add more nodes which already gets support from the latest tree e.g MT7530 DSA - add the dts file for Bananapi R2 (BPI-R2) board This series extends the dts files used for booting mt7623 base boards. Since support for mt7623 was added around v4.6, many new drivers have been accepted upstream. The contained patches add several of these to the devicetree. Additionally the series does a bit of refactoring. Mediatek pointed out that the evaluation board is infact a reference design and asked the the evb files be renamed to rfb. As with all of the current ARM bases MTK silicon, these boards also have a PMIC. Instead of adding the nodes to all of the dts files, we add an intermediate dtsi file that contains the required nodes. This allows us to reduce the size of the top most dts files. The RFB comes in various versions and asiarf has even done a crowdfunder to sell them. We should try to reduce the duplication. This series adds a common dtsi file for these boards. This results in the topmost dts files only needing to specify the compatible string, MTD nodes and ethernet setup. John Crispin (14): arm: dts: mt7623: add clock controller device nodes arm: dts: mt7623: add subsystem clock controller device nodes arm: dts: mt7623: add power domain controller device node arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file arm: dts: mt7623: add pmic wrapper nodes to the mt7623 dtsi file arm: dts: mt7623: add i2c nodes to the mt7623.dtsi file arm: dts: mt7623: add nand nodes to the mt7623.dtsi file arm: dts: mt7623: add mmc nodes to the mt7623.dtsi file arm: dts: mt7623: add usb nodes to the mt7623.dtsi file arm: dts: mt7623: add mt7623-mt6323.dtsi file arm: dts: mt7623: cleanup the mt7623n rfb uart nodes arm: dts: mt7623: enable the usb device on the mt7623n rfb arm: dts: mt7623: enable the nand device on the mt7623n nand rfb Sean Wang (16): pinctrl: mediatek: Add missing pinctrl bindings for mt7623 pinctrl: mediatek: reuse pinctrl driver for mt7623 arm: dts: mt7623: add spi nodes to the mt7623.dtsi file arm: dts: mt7623: add pwm nodes to the mt7623.dtsi file arm: dts: mt7623: add ethernet nodes to the mt7623.dtsi file arm: dts: mt7623: add crypto engine nodes to the mt7623.dtsi file arm: dts: mt7623: add ir nodes to the mt7623.dtsi file arm: dts: mt7623: add afe nodes to the mt7623.dtsi file arm: dts: mt7623: add rng nodes to the mt7623.dtsi file arm: dts: mt7623: add auxadc nodes to the mt7623.dtsi file arm: dts: mt7623: add efuse nodes to the mt7623.dtsi file arm: dts: mt7623: add thermal nodes to the mt7623.dtsi file arm: dts: mt7623: add Sean as one of authors for mt7623.dtsi files arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi dt-bindings: add vendor prefix for bananapi arm: dts: mt7623: add dts file for Bananapi R2 (BPI-R2) board Documentation/devicetree/bindings/arm/mediatek.txt | 8 +- .../devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 1 - .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/mt7623-evb.dts | 33 - arch/arm/boot/dts/mt7623-mt6323.dtsi | 269 +++ arch/arm/boot/dts/mt7623.dtsi | 556 +++++- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 478 +++++ arch/arm/boot/dts/mt7623n-rfb-nand.dts | 109 ++ arch/arm/boot/dts/mt7623n-rfb.dtsi | 61 + arch/arm/mach-mediatek/mediatek.c | 4 +- arch/arm/mach-mediatek/platsmp.c | 2 +- drivers/pinctrl/mediatek/Kconfig | 9 +- drivers/pinctrl/mediatek/Makefile | 1 - drivers/pinctrl/mediatek/pinctrl-mt7623.c | 379 ---- drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h | 1936 -------------------- include/dt-bindings/pinctrl/mt7623-pinfunc.h | 30 +- 17 files changed, 1497 insertions(+), 2383 deletions(-) delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi delete mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7623.c delete mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h -- 1.9.1 ^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v2 01/30] pinctrl: mediatek: Add missing pinctrl bindings for mt7623 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-28 7:55 ` Linus Walleij 2017-04-26 9:25 ` [PATCH v2 02/30] pinctrl: mediatek: reuse pinctrl driver " sean.wang ` (29 subsequent siblings) 30 siblings, 1 reply; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add missing pinctrl binding these which would be used in devicetree related files. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- include/dt-bindings/pinctrl/mt7623-pinfunc.h | 30 ++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/include/dt-bindings/pinctrl/mt7623-pinfunc.h b/include/dt-bindings/pinctrl/mt7623-pinfunc.h index 2f00bdc..436a87b 100644 --- a/include/dt-bindings/pinctrl/mt7623-pinfunc.h +++ b/include/dt-bindings/pinctrl/mt7623-pinfunc.h @@ -185,6 +185,12 @@ #define MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO (MTK_PIN_NO(56) | 1) #define MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MI (MTK_PIN_NO(56) | 2) +#define MT7623_PIN_57_SDA1_FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT7623_PIN_57_SDA1_FUNC_SDA1 (MTK_PIN_NO(57) | 1) + +#define MT7623_PIN_58_SCL1_FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT7623_PIN_58_SCL1_FUNC_SCL1 (MTK_PIN_NO(58) | 1) + #define MT7623_PIN_60_WB_RSTB_FUNC_GPIO60 (MTK_PIN_NO(60) | 0) #define MT7623_PIN_60_WB_RSTB_FUNC_WB_RSTB (MTK_PIN_NO(60) | 1) @@ -244,6 +250,22 @@ #define MT7623_PIN_76_SCL0_FUNC_GPIO76 (MTK_PIN_NO(76) | 0) #define MT7623_PIN_76_SCL0_FUNC_SCL0 (MTK_PIN_NO(76) | 1) +#define MT7623_PIN_79_URXD0_FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT7623_PIN_79_URXD0_FUNC_URXD0 (MTK_PIN_NO(79) | 1) +#define MT7623_PIN_79_URXD0_FUNC_UTXD0 (MTK_PIN_NO(79) | 2) + +#define MT7623_PIN_80_UTXD0_FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT7623_PIN_80_UTXD0_FUNC_UTXD0 (MTK_PIN_NO(80) | 1) +#define MT7623_PIN_80_UTXD0_FUNC_URXD0 (MTK_PIN_NO(80) | 2) + +#define MT7623_PIN_81_URXD1_FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT7623_PIN_81_URXD1_FUNC_URXD1 (MTK_PIN_NO(81) | 1) +#define MT7623_PIN_81_URXD1_FUNC_UTXD1 (MTK_PIN_NO(81) | 2) + +#define MT7623_PIN_82_UTXD1_FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT7623_PIN_82_UTXD1_FUNC_UTXD1 (MTK_PIN_NO(82) | 1) +#define MT7623_PIN_82_UTXD1_FUNC_URXD1 (MTK_PIN_NO(82) | 2) + #define MT7623_PIN_83_LCM_RST_FUNC_GPIO83 (MTK_PIN_NO(83) | 0) #define MT7623_PIN_83_LCM_RST_FUNC_LCM_RST (MTK_PIN_NO(83) | 1) @@ -351,10 +373,10 @@ #define MT7623_PIN_122_GPIO122_FUNC_SDA2 (MTK_PIN_NO(122) | 4) #define MT7623_PIN_122_GPIO122_FUNC_URXD0 (MTK_PIN_NO(122) | 5) -#define MT7623_PIN_123_GPIO123_FUNC_GPIO123 (MTK_PIN_NO(123) | 0) -#define MT7623_PIN_123_GPIO123_FUNC_TEST (MTK_PIN_NO(123) | 1) -#define MT7623_PIN_123_GPIO123_FUNC_SCL2 (MTK_PIN_NO(123) | 4) -#define MT7623_PIN_123_GPIO123_FUNC_UTXD0 (MTK_PIN_NO(123) | 5) +#define MT7623_PIN_123_HTPLG_FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT7623_PIN_123_HTPLG_FUNC_HTPLG (MTK_PIN_NO(123) | 1) +#define MT7623_PIN_123_HTPLG_FUNC_SCL2 (MTK_PIN_NO(123) | 4) +#define MT7623_PIN_123_HTPLG_FUNC_UTXD0 (MTK_PIN_NO(123) | 5) #define MT7623_PIN_124_GPIO124_FUNC_GPIO124 (MTK_PIN_NO(124) | 0) #define MT7623_PIN_124_GPIO124_FUNC_TEST (MTK_PIN_NO(124) | 1) -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH v2 01/30] pinctrl: mediatek: Add missing pinctrl bindings for mt7623 2017-04-26 9:25 ` [PATCH v2 01/30] pinctrl: mediatek: Add missing pinctrl bindings for mt7623 sean.wang @ 2017-04-28 7:55 ` Linus Walleij 0 siblings, 0 replies; 46+ messages in thread From: Linus Walleij @ 2017-04-28 7:55 UTC (permalink / raw) To: sean.wang Cc: Rob Herring, Matthias Brugger, John Crispin, Mark Rutland, Russell King, devicetree, moderated list:ARM/Mediatek SoC support, linux-arm-kernel, linux-gpio, linux-kernel On Wed, Apr 26, 2017 at 11:25 AM, <sean.wang@mediatek.com> wrote: > From: Sean Wang <sean.wang@mediatek.com> > > Add missing pinctrl binding these which would be used in > devicetree related files. > > Signed-off-by: Sean Wang <sean.wang@mediatek.com> Patch applied. This way we avoid subsystem noise in the next merge window. Yours, Linus Walleij ^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v2 02/30] pinctrl: mediatek: reuse pinctrl driver for mt7623 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang 2017-04-26 9:25 ` [PATCH v2 01/30] pinctrl: mediatek: Add missing pinctrl bindings for mt7623 sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-28 8:01 ` Linus Walleij 2017-04-26 9:25 ` [PATCH v2 03/30] arm: dts: mt7623: add clock controller device nodes sean.wang ` (28 subsequent siblings) 30 siblings, 1 reply; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> mt7623 pinctrl driver can be compatible with mt2701 one, so the patch reuses the driver and deletes those redundant ones. Cc: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- .../devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 1 - drivers/pinctrl/mediatek/Kconfig | 9 +- drivers/pinctrl/mediatek/Makefile | 1 - drivers/pinctrl/mediatek/pinctrl-mt7623.c | 379 ---- drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h | 1936 -------------------- 5 files changed, 1 insertion(+), 2325 deletions(-) delete mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7623.c delete mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 17631d0..9ffb0b2 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -6,7 +6,6 @@ Required properties: - compatible: value should be one of the following. "mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl. "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl. - "mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl. "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl. "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl. "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl. diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig index 80fe3b4..fac9866 100644 --- a/drivers/pinctrl/mediatek/Kconfig +++ b/drivers/pinctrl/mediatek/Kconfig @@ -11,18 +11,11 @@ config PINCTRL_MTK # For ARMv7 SoCs config PINCTRL_MT2701 bool "Mediatek MT2701 pin control" - depends on MACH_MT2701 || COMPILE_TEST + depends on MACH_MT7623 || MACH_MT2701 || COMPILE_TEST depends on OF default MACH_MT2701 select PINCTRL_MTK -config PINCTRL_MT7623 - bool "Mediatek MT7623 pin control" - depends on MACH_MT7623 || COMPILE_TEST - depends on OF - default MACH_MT7623 - select PINCTRL_MTK_COMMON - config PINCTRL_MT8135 bool "Mediatek MT8135 pin control" depends on MACH_MT8135 || COMPILE_TEST diff --git a/drivers/pinctrl/mediatek/Makefile b/drivers/pinctrl/mediatek/Makefile index 3e3390a..e59c613 100644 --- a/drivers/pinctrl/mediatek/Makefile +++ b/drivers/pinctrl/mediatek/Makefile @@ -3,7 +3,6 @@ obj-y += pinctrl-mtk-common.o # SoC Drivers obj-$(CONFIG_PINCTRL_MT2701) += pinctrl-mt2701.o -obj-$(CONFIG_PINCTRL_MT7623) += pinctrl-mt7623.o obj-$(CONFIG_PINCTRL_MT8135) += pinctrl-mt8135.o obj-$(CONFIG_PINCTRL_MT8127) += pinctrl-mt8127.o obj-$(CONFIG_PINCTRL_MT8173) += pinctrl-mt8173.o diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7623.c b/drivers/pinctrl/mediatek/pinctrl-mt7623.c deleted file mode 100644 index fa28dd6..0000000 --- a/drivers/pinctrl/mediatek/pinctrl-mt7623.c +++ /dev/null @@ -1,379 +0,0 @@ -/* - * Copyright (c) 2016 John Crispin <john@phrozen.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <dt-bindings/pinctrl/mt65xx.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/regmap.h> - -#include "pinctrl-mtk-common.h" -#include "pinctrl-mtk-mt7623.h" - -static const struct mtk_drv_group_desc mt7623_drv_grp[] = { - /* 0E4E8SR 4/8/12/16 */ - MTK_DRV_GRP(4, 16, 1, 2, 4), - /* 0E2E4SR 2/4/6/8 */ - MTK_DRV_GRP(2, 8, 1, 2, 2), - /* E8E4E2 2/4/6/8/10/12/14/16 */ - MTK_DRV_GRP(2, 16, 0, 2, 2) -}; - -#define DRV_SEL0 0xf50 -#define DRV_SEL1 0xf60 -#define DRV_SEL2 0xf70 -#define DRV_SEL3 0xf80 -#define DRV_SEL4 0xf90 -#define DRV_SEL5 0xfa0 -#define DRV_SEL6 0xfb0 -#define DRV_SEL7 0xfe0 -#define DRV_SEL8 0xfd0 -#define DRV_SEL9 0xff0 -#define DRV_SEL10 0xf00 - -#define MSDC0_CTRL0 0xcc0 -#define MSDC0_CTRL1 0xcd0 -#define MSDC0_CTRL2 0xce0 -#define MSDC0_CTRL3 0xcf0 -#define MSDC0_CTRL4 0xd00 -#define MSDC0_CTRL5 0xd10 -#define MSDC0_CTRL6 0xd20 -#define MSDC1_CTRL0 0xd30 -#define MSDC1_CTRL1 0xd40 -#define MSDC1_CTRL2 0xd50 -#define MSDC1_CTRL3 0xd60 -#define MSDC1_CTRL4 0xd70 -#define MSDC1_CTRL5 0xd80 -#define MSDC1_CTRL6 0xd90 - -#define IES_EN0 0xb20 -#define IES_EN1 0xb30 -#define IES_EN2 0xb40 - -#define SMT_EN0 0xb50 -#define SMT_EN1 0xb60 -#define SMT_EN2 0xb70 - -static const struct mtk_pin_drv_grp mt7623_pin_drv[] = { - MTK_PIN_DRV_GRP(0, DRV_SEL0, 0, 1), - MTK_PIN_DRV_GRP(1, DRV_SEL0, 0, 1), - MTK_PIN_DRV_GRP(2, DRV_SEL0, 0, 1), - MTK_PIN_DRV_GRP(3, DRV_SEL0, 0, 1), - MTK_PIN_DRV_GRP(4, DRV_SEL0, 0, 1), - MTK_PIN_DRV_GRP(5, DRV_SEL0, 0, 1), - MTK_PIN_DRV_GRP(6, DRV_SEL0, 0, 1), - MTK_PIN_DRV_GRP(7, DRV_SEL0, 4, 1), - MTK_PIN_DRV_GRP(8, DRV_SEL0, 4, 1), - MTK_PIN_DRV_GRP(9, DRV_SEL0, 4, 1), - MTK_PIN_DRV_GRP(10, DRV_SEL0, 8, 1), - MTK_PIN_DRV_GRP(11, DRV_SEL0, 8, 1), - MTK_PIN_DRV_GRP(12, DRV_SEL0, 8, 1), - MTK_PIN_DRV_GRP(13, DRV_SEL0, 8, 1), - MTK_PIN_DRV_GRP(14, DRV_SEL0, 12, 0), - MTK_PIN_DRV_GRP(15, DRV_SEL0, 12, 0), - MTK_PIN_DRV_GRP(18, DRV_SEL1, 4, 0), - MTK_PIN_DRV_GRP(19, DRV_SEL1, 4, 0), - MTK_PIN_DRV_GRP(20, DRV_SEL1, 4, 0), - MTK_PIN_DRV_GRP(21, DRV_SEL1, 4, 0), - MTK_PIN_DRV_GRP(22, DRV_SEL1, 8, 0), - MTK_PIN_DRV_GRP(23, DRV_SEL1, 8, 0), - MTK_PIN_DRV_GRP(24, DRV_SEL1, 8, 0), - MTK_PIN_DRV_GRP(25, DRV_SEL1, 8, 0), - MTK_PIN_DRV_GRP(26, DRV_SEL1, 8, 0), - MTK_PIN_DRV_GRP(27, DRV_SEL1, 12, 0), - MTK_PIN_DRV_GRP(28, DRV_SEL1, 12, 0), - MTK_PIN_DRV_GRP(29, DRV_SEL1, 12, 0), - MTK_PIN_DRV_GRP(33, DRV_SEL2, 0, 0), - MTK_PIN_DRV_GRP(34, DRV_SEL2, 0, 0), - MTK_PIN_DRV_GRP(35, DRV_SEL2, 0, 0), - MTK_PIN_DRV_GRP(36, DRV_SEL2, 0, 0), - MTK_PIN_DRV_GRP(37, DRV_SEL2, 0, 0), - MTK_PIN_DRV_GRP(39, DRV_SEL2, 8, 1), - MTK_PIN_DRV_GRP(40, DRV_SEL2, 8, 1), - MTK_PIN_DRV_GRP(41, DRV_SEL2, 8, 1), - MTK_PIN_DRV_GRP(42, DRV_SEL2, 8, 1), - MTK_PIN_DRV_GRP(43, DRV_SEL2, 12, 0), - MTK_PIN_DRV_GRP(44, DRV_SEL2, 12, 0), - MTK_PIN_DRV_GRP(45, DRV_SEL2, 12, 0), - MTK_PIN_DRV_GRP(47, DRV_SEL3, 0, 0), - MTK_PIN_DRV_GRP(48, DRV_SEL3, 0, 0), - MTK_PIN_DRV_GRP(49, DRV_SEL3, 4, 0), - MTK_PIN_DRV_GRP(53, DRV_SEL3, 12, 0), - MTK_PIN_DRV_GRP(54, DRV_SEL3, 12, 0), - MTK_PIN_DRV_GRP(55, DRV_SEL3, 12, 0), - MTK_PIN_DRV_GRP(56, DRV_SEL3, 12, 0), - MTK_PIN_DRV_GRP(60, DRV_SEL4, 8, 1), - MTK_PIN_DRV_GRP(61, DRV_SEL4, 8, 1), - MTK_PIN_DRV_GRP(62, DRV_SEL4, 8, 1), - MTK_PIN_DRV_GRP(63, DRV_SEL4, 12, 1), - MTK_PIN_DRV_GRP(64, DRV_SEL4, 12, 1), - MTK_PIN_DRV_GRP(65, DRV_SEL4, 12, 1), - MTK_PIN_DRV_GRP(66, DRV_SEL5, 0, 1), - MTK_PIN_DRV_GRP(67, DRV_SEL5, 0, 1), - MTK_PIN_DRV_GRP(68, DRV_SEL5, 0, 1), - MTK_PIN_DRV_GRP(69, DRV_SEL5, 0, 1), - MTK_PIN_DRV_GRP(70, DRV_SEL5, 0, 1), - MTK_PIN_DRV_GRP(71, DRV_SEL5, 0, 1), - MTK_PIN_DRV_GRP(72, DRV_SEL3, 4, 0), - MTK_PIN_DRV_GRP(73, DRV_SEL3, 4, 0), - MTK_PIN_DRV_GRP(74, DRV_SEL3, 4, 0), - MTK_PIN_DRV_GRP(83, DRV_SEL5, 0, 1), - MTK_PIN_DRV_GRP(84, DRV_SEL5, 0, 1), - MTK_PIN_DRV_GRP(105, MSDC1_CTRL1, 0, 1), - MTK_PIN_DRV_GRP(106, MSDC1_CTRL0, 0, 1), - MTK_PIN_DRV_GRP(107, MSDC1_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(108, MSDC1_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(109, MSDC1_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(110, MSDC1_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(111, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(112, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(113, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(114, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(115, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(116, MSDC0_CTRL1, 0, 1), - MTK_PIN_DRV_GRP(117, MSDC0_CTRL0, 0, 1), - MTK_PIN_DRV_GRP(118, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(119, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(120, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(121, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(126, DRV_SEL3, 4, 0), - MTK_PIN_DRV_GRP(199, DRV_SEL0, 4, 1), - MTK_PIN_DRV_GRP(200, DRV_SEL8, 0, 0), - MTK_PIN_DRV_GRP(201, DRV_SEL8, 0, 0), - MTK_PIN_DRV_GRP(203, DRV_SEL8, 4, 0), - MTK_PIN_DRV_GRP(204, DRV_SEL8, 4, 0), - MTK_PIN_DRV_GRP(205, DRV_SEL8, 4, 0), - MTK_PIN_DRV_GRP(206, DRV_SEL8, 4, 0), - MTK_PIN_DRV_GRP(207, DRV_SEL8, 4, 0), - MTK_PIN_DRV_GRP(208, DRV_SEL8, 8, 0), - MTK_PIN_DRV_GRP(209, DRV_SEL8, 8, 0), - MTK_PIN_DRV_GRP(236, DRV_SEL9, 4, 0), - MTK_PIN_DRV_GRP(237, DRV_SEL9, 4, 0), - MTK_PIN_DRV_GRP(238, DRV_SEL9, 4, 0), - MTK_PIN_DRV_GRP(239, DRV_SEL9, 4, 0), - MTK_PIN_DRV_GRP(240, DRV_SEL9, 4, 0), - MTK_PIN_DRV_GRP(241, DRV_SEL9, 4, 0), - MTK_PIN_DRV_GRP(242, DRV_SEL9, 8, 0), - MTK_PIN_DRV_GRP(243, DRV_SEL9, 8, 0), - MTK_PIN_DRV_GRP(257, MSDC0_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(261, MSDC1_CTRL2, 0, 1), - MTK_PIN_DRV_GRP(262, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(263, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(264, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(265, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(266, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(267, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(268, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(269, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(270, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(271, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(272, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(274, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(275, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(276, DRV_SEL10, 8, 0), - MTK_PIN_DRV_GRP(278, DRV_SEL2, 8, 1), -}; - -static const struct mtk_pin_spec_pupd_set_samereg mt7623_spec_pupd[] = { - MTK_PIN_PUPD_SPEC_SR(105, MSDC1_CTRL1, 8, 9, 10), - MTK_PIN_PUPD_SPEC_SR(106, MSDC1_CTRL0, 8, 9, 10), - MTK_PIN_PUPD_SPEC_SR(107, MSDC1_CTRL3, 0, 1, 2), - MTK_PIN_PUPD_SPEC_SR(108, MSDC1_CTRL3, 4, 5, 6), - MTK_PIN_PUPD_SPEC_SR(109, MSDC1_CTRL3, 8, 9, 10), - MTK_PIN_PUPD_SPEC_SR(110, MSDC1_CTRL3, 12, 13, 14), - MTK_PIN_PUPD_SPEC_SR(111, MSDC0_CTRL4, 12, 13, 14), - MTK_PIN_PUPD_SPEC_SR(112, MSDC0_CTRL4, 8, 9, 10), - MTK_PIN_PUPD_SPEC_SR(113, MSDC0_CTRL4, 4, 5, 6), - MTK_PIN_PUPD_SPEC_SR(114, MSDC0_CTRL4, 0, 1, 2), - MTK_PIN_PUPD_SPEC_SR(115, MSDC0_CTRL5, 0, 1, 2), - MTK_PIN_PUPD_SPEC_SR(116, MSDC0_CTRL1, 8, 9, 10), - MTK_PIN_PUPD_SPEC_SR(117, MSDC0_CTRL0, 8, 9, 10), - MTK_PIN_PUPD_SPEC_SR(118, MSDC0_CTRL3, 12, 13, 14), - MTK_PIN_PUPD_SPEC_SR(119, MSDC0_CTRL3, 8, 9, 10), - MTK_PIN_PUPD_SPEC_SR(120, MSDC0_CTRL3, 4, 5, 6), - MTK_PIN_PUPD_SPEC_SR(121, MSDC0_CTRL3, 0, 1, 2), -}; - -static int mt7623_spec_pull_set(struct regmap *regmap, unsigned int pin, - unsigned char align, bool isup, unsigned int r1r0) -{ - return mtk_pctrl_spec_pull_set_samereg(regmap, mt7623_spec_pupd, - ARRAY_SIZE(mt7623_spec_pupd), pin, align, isup, r1r0); -} - -static const struct mtk_pin_ies_smt_set mt7623_ies_set[] = { - MTK_PIN_IES_SMT_SPEC(0, 6, IES_EN0, 0), - MTK_PIN_IES_SMT_SPEC(7, 9, IES_EN0, 1), - MTK_PIN_IES_SMT_SPEC(10, 13, IES_EN0, 2), - MTK_PIN_IES_SMT_SPEC(14, 15, IES_EN0, 3), - MTK_PIN_IES_SMT_SPEC(18, 21, IES_EN0, 5), - MTK_PIN_IES_SMT_SPEC(22, 26, IES_EN0, 6), - MTK_PIN_IES_SMT_SPEC(27, 29, IES_EN0, 7), - MTK_PIN_IES_SMT_SPEC(33, 37, IES_EN0, 8), - MTK_PIN_IES_SMT_SPEC(39, 42, IES_EN0, 9), - MTK_PIN_IES_SMT_SPEC(43, 45, IES_EN0, 10), - MTK_PIN_IES_SMT_SPEC(47, 48, IES_EN0, 11), - MTK_PIN_IES_SMT_SPEC(49, 49, IES_EN0, 12), - MTK_PIN_IES_SMT_SPEC(53, 56, IES_EN0, 14), - MTK_PIN_IES_SMT_SPEC(60, 62, IES_EN1, 0), - MTK_PIN_IES_SMT_SPEC(63, 65, IES_EN1, 1), - MTK_PIN_IES_SMT_SPEC(66, 71, IES_EN1, 2), - MTK_PIN_IES_SMT_SPEC(72, 74, IES_EN0, 12), - MTK_PIN_IES_SMT_SPEC(75, 76, IES_EN1, 3), - MTK_PIN_IES_SMT_SPEC(83, 84, IES_EN1, 2), - MTK_PIN_IES_SMT_SPEC(105, 121, MSDC1_CTRL1, 4), - MTK_PIN_IES_SMT_SPEC(122, 125, IES_EN1, 7), - MTK_PIN_IES_SMT_SPEC(126, 126, IES_EN0, 12), - MTK_PIN_IES_SMT_SPEC(199, 201, IES_EN0, 1), - MTK_PIN_IES_SMT_SPEC(203, 207, IES_EN2, 2), - MTK_PIN_IES_SMT_SPEC(208, 209, IES_EN2, 3), - MTK_PIN_IES_SMT_SPEC(236, 241, IES_EN2, 6), - MTK_PIN_IES_SMT_SPEC(242, 243, IES_EN2, 7), - MTK_PIN_IES_SMT_SPEC(261, 261, MSDC1_CTRL2, 4), - MTK_PIN_IES_SMT_SPEC(262, 272, IES_EN2, 12), - MTK_PIN_IES_SMT_SPEC(274, 276, IES_EN2, 12), - MTK_PIN_IES_SMT_SPEC(278, 278, IES_EN2, 13), -}; - -static const struct mtk_pin_ies_smt_set mt7623_smt_set[] = { - MTK_PIN_IES_SMT_SPEC(0, 6, SMT_EN0, 0), - MTK_PIN_IES_SMT_SPEC(7, 9, SMT_EN0, 1), - MTK_PIN_IES_SMT_SPEC(10, 13, SMT_EN0, 2), - MTK_PIN_IES_SMT_SPEC(14, 15, SMT_EN0, 3), - MTK_PIN_IES_SMT_SPEC(18, 21, SMT_EN0, 5), - MTK_PIN_IES_SMT_SPEC(22, 26, SMT_EN0, 6), - MTK_PIN_IES_SMT_SPEC(27, 29, SMT_EN0, 7), - MTK_PIN_IES_SMT_SPEC(33, 37, SMT_EN0, 8), - MTK_PIN_IES_SMT_SPEC(39, 42, SMT_EN0, 9), - MTK_PIN_IES_SMT_SPEC(43, 45, SMT_EN0, 10), - MTK_PIN_IES_SMT_SPEC(47, 48, SMT_EN0, 11), - MTK_PIN_IES_SMT_SPEC(49, 49, SMT_EN0, 12), - MTK_PIN_IES_SMT_SPEC(53, 56, SMT_EN0, 14), - MTK_PIN_IES_SMT_SPEC(60, 62, SMT_EN1, 0), - MTK_PIN_IES_SMT_SPEC(63, 65, SMT_EN1, 1), - MTK_PIN_IES_SMT_SPEC(66, 71, SMT_EN1, 2), - MTK_PIN_IES_SMT_SPEC(72, 74, SMT_EN0, 12), - MTK_PIN_IES_SMT_SPEC(75, 76, SMT_EN1, 3), - MTK_PIN_IES_SMT_SPEC(83, 84, SMT_EN1, 2), - MTK_PIN_IES_SMT_SPEC(105, 106, MSDC1_CTRL1, 11), - MTK_PIN_IES_SMT_SPEC(107, 107, MSDC1_CTRL3, 3), - MTK_PIN_IES_SMT_SPEC(108, 108, MSDC1_CTRL3, 7), - MTK_PIN_IES_SMT_SPEC(109, 109, MSDC1_CTRL3, 11), - MTK_PIN_IES_SMT_SPEC(110, 111, MSDC1_CTRL3, 15), - MTK_PIN_IES_SMT_SPEC(112, 112, MSDC0_CTRL4, 11), - MTK_PIN_IES_SMT_SPEC(113, 113, MSDC0_CTRL4, 7), - MTK_PIN_IES_SMT_SPEC(114, 115, MSDC0_CTRL4, 3), - MTK_PIN_IES_SMT_SPEC(116, 117, MSDC0_CTRL1, 11), - MTK_PIN_IES_SMT_SPEC(118, 118, MSDC0_CTRL3, 15), - MTK_PIN_IES_SMT_SPEC(119, 119, MSDC0_CTRL3, 11), - MTK_PIN_IES_SMT_SPEC(120, 120, MSDC0_CTRL3, 7), - MTK_PIN_IES_SMT_SPEC(121, 121, MSDC0_CTRL3, 3), - MTK_PIN_IES_SMT_SPEC(122, 125, SMT_EN1, 7), - MTK_PIN_IES_SMT_SPEC(126, 126, SMT_EN0, 12), - MTK_PIN_IES_SMT_SPEC(199, 201, SMT_EN0, 1), - MTK_PIN_IES_SMT_SPEC(203, 207, SMT_EN2, 2), - MTK_PIN_IES_SMT_SPEC(208, 209, SMT_EN2, 3), - MTK_PIN_IES_SMT_SPEC(236, 241, SMT_EN2, 6), - MTK_PIN_IES_SMT_SPEC(242, 243, SMT_EN2, 7), - MTK_PIN_IES_SMT_SPEC(261, 261, MSDC1_CTRL6, 3), - MTK_PIN_IES_SMT_SPEC(262, 272, SMT_EN2, 12), - MTK_PIN_IES_SMT_SPEC(274, 276, SMT_EN2, 12), - MTK_PIN_IES_SMT_SPEC(278, 278, SMT_EN2, 13), -}; - -static int mt7623_ies_smt_set(struct regmap *regmap, unsigned int pin, - unsigned char align, int value, enum pin_config_param arg) -{ - if (arg == PIN_CONFIG_INPUT_ENABLE) - return mtk_pconf_spec_set_ies_smt_range(regmap, mt7623_ies_set, - ARRAY_SIZE(mt7623_ies_set), pin, align, value); - else if (arg == PIN_CONFIG_INPUT_SCHMITT_ENABLE) - return mtk_pconf_spec_set_ies_smt_range(regmap, mt7623_smt_set, - ARRAY_SIZE(mt7623_smt_set), pin, align, value); - return -EINVAL; -} - -static const struct mtk_pinctrl_devdata mt7623_pinctrl_data = { - .pins = mtk_pins_mt7623, - .npins = ARRAY_SIZE(mtk_pins_mt7623), - .grp_desc = mt7623_drv_grp, - .n_grp_cls = ARRAY_SIZE(mt7623_drv_grp), - .pin_drv_grp = mt7623_pin_drv, - .n_pin_drv_grps = ARRAY_SIZE(mt7623_pin_drv), - .spec_pull_set = mt7623_spec_pull_set, - .spec_ies_smt_set = mt7623_ies_smt_set, - .dir_offset = 0x0000, - .pullen_offset = 0x0150, - .pullsel_offset = 0x0280, - .dout_offset = 0x0500, - .din_offset = 0x0630, - .pinmux_offset = 0x0760, - .type1_start = 280, - .type1_end = 280, - .port_shf = 4, - .port_mask = 0x1f, - .port_align = 4, - .eint_offsets = { - .name = "mt7623_eint", - .stat = 0x000, - .ack = 0x040, - .mask = 0x080, - .mask_set = 0x0c0, - .mask_clr = 0x100, - .sens = 0x140, - .sens_set = 0x180, - .sens_clr = 0x1c0, - .soft = 0x200, - .soft_set = 0x240, - .soft_clr = 0x280, - .pol = 0x300, - .pol_set = 0x340, - .pol_clr = 0x380, - .dom_en = 0x400, - .dbnc_ctrl = 0x500, - .dbnc_set = 0x600, - .dbnc_clr = 0x700, - .port_mask = 6, - .ports = 6, - }, - .ap_num = 169, - .db_cnt = 16, -}; - -static int mt7623_pinctrl_probe(struct platform_device *pdev) -{ - return mtk_pctrl_init(pdev, &mt7623_pinctrl_data, NULL); -} - -static const struct of_device_id mt7623_pctrl_match[] = { - { .compatible = "mediatek,mt7623-pinctrl", }, - {} -}; -MODULE_DEVICE_TABLE(of, mt7623_pctrl_match); - -static struct platform_driver mtk_pinctrl_driver = { - .probe = mt7623_pinctrl_probe, - .driver = { - .name = "mediatek-mt7623-pinctrl", - .of_match_table = mt7623_pctrl_match, - }, -}; - -static int __init mtk_pinctrl_init(void) -{ - return platform_driver_register(&mtk_pinctrl_driver); -} - -arch_initcall(mtk_pinctrl_init); diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h b/drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h deleted file mode 100644 index e06cfc4..0000000 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h +++ /dev/null @@ -1,1936 +0,0 @@ -/* - * Copyright (c) 2016 John Crispin <john@phrozen.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __PINCTRL_MTK_MT7623_H -#define __PINCTRL_MTK_MT7623_H - -#include <linux/pinctrl/pinctrl.h> -#include "pinctrl-mtk-common.h" - -static const struct mtk_desc_pin mtk_pins_mt7623[] = { - MTK_PIN( - PINCTRL_PIN(0, "PWRAP_SPI0_MI"), - "J20", "mt7623", - MTK_EINT_FUNCTION(0, 148), - MTK_FUNCTION(0, "GPIO0"), - MTK_FUNCTION(1, "PWRAP_SPIDO"), - MTK_FUNCTION(2, "PWRAP_SPIDI") - ), - MTK_PIN( - PINCTRL_PIN(1, "PWRAP_SPI0_MO"), - "D10", "mt7623", - MTK_EINT_FUNCTION(0, 149), - MTK_FUNCTION(0, "GPIO1"), - MTK_FUNCTION(1, "PWRAP_SPIDI"), - MTK_FUNCTION(2, "PWRAP_SPIDO") - ), - MTK_PIN( - PINCTRL_PIN(2, "PWRAP_INT"), - "E11", "mt7623", - MTK_EINT_FUNCTION(0, 150), - MTK_FUNCTION(0, "GPIO2"), - MTK_FUNCTION(1, "PWRAP_INT") - ), - MTK_PIN( - PINCTRL_PIN(3, "PWRAP_SPI0_CK"), - "H12", "mt7623", - MTK_EINT_FUNCTION(0, 151), - MTK_FUNCTION(0, "GPIO3"), - MTK_FUNCTION(1, "PWRAP_SPICK_I") - ), - MTK_PIN( - PINCTRL_PIN(4, "PWRAP_SPI0_CSN"), - "E12", "mt7623", - MTK_EINT_FUNCTION(0, 152), - MTK_FUNCTION(0, "GPIO4"), - MTK_FUNCTION(1, "PWRAP_SPICS_B_I") - ), - MTK_PIN( - PINCTRL_PIN(5, "PWRAP_SPI0_CK2"), - "H11", "mt7623", - MTK_EINT_FUNCTION(0, 155), - MTK_FUNCTION(0, "GPIO5"), - MTK_FUNCTION(1, "PWRAP_SPICK2_I") - ), - MTK_PIN( - PINCTRL_PIN(6, "PWRAP_SPI0_CSN2"), - "G11", "mt7623", - MTK_EINT_FUNCTION(0, 156), - MTK_FUNCTION(0, "GPIO6"), - MTK_FUNCTION(1, "PWRAP_SPICS2_B_I") - ), - MTK_PIN( - PINCTRL_PIN(7, "SPI1_CSN"), - "G19", "mt7623", - MTK_EINT_FUNCTION(0, 153), - MTK_FUNCTION(0, "GPIO7"), - MTK_FUNCTION(1, "SPI1_CS") - ), - MTK_PIN( - PINCTRL_PIN(8, "SPI1_MI"), - "F19", "mt7623", - MTK_EINT_FUNCTION(0, 154), - MTK_FUNCTION(0, "GPIO8"), - MTK_FUNCTION(1, "SPI1_MI"), - MTK_FUNCTION(2, "SPI1_MO") - ), - MTK_PIN( - PINCTRL_PIN(9, "SPI1_MO"), - "G20", "mt7623", - MTK_EINT_FUNCTION(0, 157), - MTK_FUNCTION(0, "GPIO9"), - MTK_FUNCTION(1, "SPI1_MO"), - MTK_FUNCTION(2, "SPI1_MI") - ), - MTK_PIN( - PINCTRL_PIN(10, "RTC32K_CK"), - "A13", "mt7623", - MTK_EINT_FUNCTION(0, 158), - MTK_FUNCTION(0, "GPIO10"), - MTK_FUNCTION(1, "RTC32K_CK") - ), - MTK_PIN( - PINCTRL_PIN(11, "WATCHDOG"), - "D14", "mt7623", - MTK_EINT_FUNCTION(0, 159), - MTK_FUNCTION(0, "GPIO11"), - MTK_FUNCTION(1, "WATCHDOG") - ), - MTK_PIN( - PINCTRL_PIN(12, "SRCLKENA"), - "C13", "mt7623", - MTK_EINT_FUNCTION(0, 169), - MTK_FUNCTION(0, "GPIO12"), - MTK_FUNCTION(1, "SRCLKENA") - ), - MTK_PIN( - PINCTRL_PIN(13, "SRCLKENAI"), - "B13", "mt7623", - MTK_EINT_FUNCTION(0, 161), - MTK_FUNCTION(0, "GPIO13"), - MTK_FUNCTION(1, "SRCLKENAI") - ), - MTK_PIN( - PINCTRL_PIN(14, "GPIO14"), - "E18", "mt7623", - MTK_EINT_FUNCTION(0, 162), - MTK_FUNCTION(0, "GPIO14"), - MTK_FUNCTION(1, "URXD2"), - MTK_FUNCTION(2, "UTXD2") - ), - MTK_PIN( - PINCTRL_PIN(15, "GPIO15"), - "E17", "mt7623", - MTK_EINT_FUNCTION(0, 163), - MTK_FUNCTION(0, "GPIO15"), - MTK_FUNCTION(1, "UTXD2"), - MTK_FUNCTION(2, "URXD2") - ), - MTK_PIN( - PINCTRL_PIN(16, "GPIO16"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO16") - ), - MTK_PIN( - PINCTRL_PIN(17, "GPIO17"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO17") - ), - MTK_PIN( - PINCTRL_PIN(18, "PCM_CLK"), - "C19", "mt7623", - MTK_EINT_FUNCTION(0, 166), - MTK_FUNCTION(0, "GPIO18"), - MTK_FUNCTION(1, "PCM_CLK0"), - MTK_FUNCTION(6, "AP_PCM_CLKO") - ), - MTK_PIN( - PINCTRL_PIN(19, "PCM_SYNC"), - "D19", "mt7623", - MTK_EINT_FUNCTION(0, 167), - MTK_FUNCTION(0, "GPIO19"), - MTK_FUNCTION(1, "PCM_SYNC"), - MTK_FUNCTION(6, "AP_PCM_SYNC") - ), - MTK_PIN( - PINCTRL_PIN(20, "PCM_RX"), - "D18", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO20"), - MTK_FUNCTION(1, "PCM_RX"), - MTK_FUNCTION(4, "PCM_TX"), - MTK_FUNCTION(6, "AP_PCM_RX") - ), - MTK_PIN( - PINCTRL_PIN(21, "PCM_TX"), - "C18", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO21"), - MTK_FUNCTION(1, "PCM_TX"), - MTK_FUNCTION(4, "PCM_RX"), - MTK_FUNCTION(6, "AP_PCM_TX") - ), - MTK_PIN( - PINCTRL_PIN(22, "EINT0"), - "H15", "mt7623", - MTK_EINT_FUNCTION(0, 0), - MTK_FUNCTION(0, "GPIO22"), - MTK_FUNCTION(1, "UCTS0"), - MTK_FUNCTION(2, "PCIE0_PERST_N") - ), - MTK_PIN( - PINCTRL_PIN(23, "EINT1"), - "J16", "mt7623", - MTK_EINT_FUNCTION(0, 1), - MTK_FUNCTION(0, "GPIO23"), - MTK_FUNCTION(1, "URTS0"), - MTK_FUNCTION(2, "PCIE1_PERST_N") - ), - MTK_PIN( - PINCTRL_PIN(24, "EINT2"), - "H16", "mt7623", - MTK_EINT_FUNCTION(0, 2), - MTK_FUNCTION(0, "GPIO24"), - MTK_FUNCTION(1, "UCTS1"), - MTK_FUNCTION(2, "PCIE2_PERST_N") - ), - MTK_PIN( - PINCTRL_PIN(25, "EINT3"), - "K15", "mt7623", - MTK_EINT_FUNCTION(0, 3), - MTK_FUNCTION(0, "GPIO25"), - MTK_FUNCTION(1, "URTS1") - ), - MTK_PIN( - PINCTRL_PIN(26, "EINT4"), - "G15", "mt7623", - MTK_EINT_FUNCTION(0, 4), - MTK_FUNCTION(0, "GPIO26"), - MTK_FUNCTION(1, "UCTS3"), - MTK_FUNCTION(6, "PCIE2_WAKE_N") - ), - MTK_PIN( - PINCTRL_PIN(27, "EINT5"), - "F15", "mt7623", - MTK_EINT_FUNCTION(0, 5), - MTK_FUNCTION(0, "GPIO27"), - MTK_FUNCTION(1, "URTS3"), - MTK_FUNCTION(6, "PCIE1_WAKE_N") - ), - MTK_PIN( - PINCTRL_PIN(28, "EINT6"), - "J15", "mt7623", - MTK_EINT_FUNCTION(0, 6), - MTK_FUNCTION(0, "GPIO28"), - MTK_FUNCTION(1, "DRV_VBUS"), - MTK_FUNCTION(6, "PCIE0_WAKE_N") - ), - MTK_PIN( - PINCTRL_PIN(29, "EINT7"), - "E15", "mt7623", - MTK_EINT_FUNCTION(0, 7), - MTK_FUNCTION(0, "GPIO29"), - MTK_FUNCTION(1, "IDDIG"), - MTK_FUNCTION(2, "MSDC1_WP"), - MTK_FUNCTION(6, "PCIE2_PERST_N") - ), - MTK_PIN( - PINCTRL_PIN(30, "GPIO30"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO30") - ), - MTK_PIN( - PINCTRL_PIN(31, "GPIO31"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO31") - ), - MTK_PIN( - PINCTRL_PIN(32, "GPIO32"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO32") - ), - MTK_PIN( - PINCTRL_PIN(33, "I2S1_DATA"), - "Y18", "mt7623", - MTK_EINT_FUNCTION(0, 15), - MTK_FUNCTION(0, "GPIO33"), - MTK_FUNCTION(1, "I2S1_DATA"), - MTK_FUNCTION(3, "PCM_TX"), - MTK_FUNCTION(6, "AP_PCM_TX") - ), - MTK_PIN( - PINCTRL_PIN(34, "I2S1_DATA_IN"), - "Y17", "mt7623", - MTK_EINT_FUNCTION(0, 16), - MTK_FUNCTION(0, "GPIO34"), - MTK_FUNCTION(1, "I2S1_DATA_IN"), - MTK_FUNCTION(3, "PCM_RX"), - MTK_FUNCTION(6, "AP_PCM_RX") - ), - MTK_PIN( - PINCTRL_PIN(35, "I2S1_BCK"), - "V17", "mt7623", - MTK_EINT_FUNCTION(0, 17), - MTK_FUNCTION(0, "GPIO35"), - MTK_FUNCTION(1, "I2S1_BCK"), - MTK_FUNCTION(3, "PCM_CLK0"), - MTK_FUNCTION(6, "AP_PCM_CLKO") - ), - MTK_PIN( - PINCTRL_PIN(36, "I2S1_LRCK"), - "W17", "mt7623", - MTK_EINT_FUNCTION(0, 18), - MTK_FUNCTION(0, "GPIO36"), - MTK_FUNCTION(1, "I2S1_LRCK"), - MTK_FUNCTION(3, "PCM_SYNC"), - MTK_FUNCTION(6, "AP_PCM_SYNC") - ), - MTK_PIN( - PINCTRL_PIN(37, "I2S1_MCLK"), - "AA18", "mt7623", - MTK_EINT_FUNCTION(0, 19), - MTK_FUNCTION(0, "GPIO37"), - MTK_FUNCTION(1, "I2S1_MCLK") - ), - MTK_PIN( - PINCTRL_PIN(38, "GPIO38"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO38") - ), - MTK_PIN( - PINCTRL_PIN(39, "JTMS"), - "G21", "mt7623", - MTK_EINT_FUNCTION(0, 21), - MTK_FUNCTION(0, "GPIO39"), - MTK_FUNCTION(1, "JTMS") - ), - MTK_PIN( - PINCTRL_PIN(40, "GPIO40"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO40") - ), - MTK_PIN( - PINCTRL_PIN(41, "JTDI"), - "H22", "mt7623", - MTK_EINT_FUNCTION(0, 23), - MTK_FUNCTION(0, "GPIO41"), - MTK_FUNCTION(1, "JTDI") - ), - MTK_PIN( - PINCTRL_PIN(42, "JTDO"), - "H21", "mt7623", - MTK_EINT_FUNCTION(0, 24), - MTK_FUNCTION(0, "GPIO42"), - MTK_FUNCTION(1, "JTDO") - ), - MTK_PIN( - PINCTRL_PIN(43, "NCLE"), - "C7", "mt7623", - MTK_EINT_FUNCTION(0, 25), - MTK_FUNCTION(0, "GPIO43"), - MTK_FUNCTION(1, "NCLE"), - MTK_FUNCTION(2, "EXT_XCS2") - ), - MTK_PIN( - PINCTRL_PIN(44, "NCEB1"), - "C6", "mt7623", - MTK_EINT_FUNCTION(0, 26), - MTK_FUNCTION(0, "GPIO44"), - MTK_FUNCTION(1, "NCEB1"), - MTK_FUNCTION(2, "IDDIG") - ), - MTK_PIN( - PINCTRL_PIN(45, "NCEB0"), - "D7", "mt7623", - MTK_EINT_FUNCTION(0, 27), - MTK_FUNCTION(0, "GPIO45"), - MTK_FUNCTION(1, "NCEB0"), - MTK_FUNCTION(2, "DRV_VBUS") - ), - MTK_PIN( - PINCTRL_PIN(46, "IR"), - "D15", "mt7623", - MTK_EINT_FUNCTION(0, 28), - MTK_FUNCTION(0, "GPIO46"), - MTK_FUNCTION(1, "IR") - ), - MTK_PIN( - PINCTRL_PIN(47, "NREB"), - "A6", "mt7623", - MTK_EINT_FUNCTION(0, 29), - MTK_FUNCTION(0, "GPIO47"), - MTK_FUNCTION(1, "NREB") - ), - MTK_PIN( - PINCTRL_PIN(48, "NRNB"), - "B6", "mt7623", - MTK_EINT_FUNCTION(0, 30), - MTK_FUNCTION(0, "GPIO48"), - MTK_FUNCTION(1, "NRNB") - ), - MTK_PIN( - PINCTRL_PIN(49, "I2S0_DATA"), - "AB18", "mt7623", - MTK_EINT_FUNCTION(0, 31), - MTK_FUNCTION(0, "GPIO49"), - MTK_FUNCTION(1, "I2S0_DATA"), - MTK_FUNCTION(3, "PCM_TX"), - MTK_FUNCTION(6, "AP_I2S_DO") - ), - MTK_PIN( - PINCTRL_PIN(50, "GPIO50"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO50") - ), - MTK_PIN( - PINCTRL_PIN(51, "GPIO51"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO51") - ), - MTK_PIN( - PINCTRL_PIN(52, "GPIO52"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO52") - ), - MTK_PIN( - PINCTRL_PIN(53, "SPI0_CSN"), - "E7", "mt7623", - MTK_EINT_FUNCTION(0, 35), - MTK_FUNCTION(0, "GPIO53"), - MTK_FUNCTION(1, "SPI0_CS"), - MTK_FUNCTION(5, "PWM1") - ), - MTK_PIN( - PINCTRL_PIN(54, "SPI0_CK"), - "F7", "mt7623", - MTK_EINT_FUNCTION(0, 36), - MTK_FUNCTION(0, "GPIO54"), - MTK_FUNCTION(1, "SPI0_CK") - ), - MTK_PIN( - PINCTRL_PIN(55, "SPI0_MI"), - "E6", "mt7623", - MTK_EINT_FUNCTION(0, 37), - MTK_FUNCTION(0, "GPIO55"), - MTK_FUNCTION(1, "SPI0_MI"), - MTK_FUNCTION(2, "SPI0_MO"), - MTK_FUNCTION(3, "MSDC1_WP"), - MTK_FUNCTION(5, "PWM2") - ), - MTK_PIN( - PINCTRL_PIN(56, "SPI0_MO"), - "G7", "mt7623", - MTK_EINT_FUNCTION(0, 38), - MTK_FUNCTION(0, "GPIO56"), - MTK_FUNCTION(1, "SPI0_MO"), - MTK_FUNCTION(2, "SPI0_MI") - ), - MTK_PIN( - PINCTRL_PIN(57, "GPIO57"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO57") - ), - MTK_PIN( - PINCTRL_PIN(58, "GPIO58"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO58") - ), - MTK_PIN( - PINCTRL_PIN(59, "GPIO59"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO59") - ), - MTK_PIN( - PINCTRL_PIN(60, "WB_RSTB"), - "Y21", "mt7623", - MTK_EINT_FUNCTION(0, 41), - MTK_FUNCTION(0, "GPIO60"), - MTK_FUNCTION(1, "WB_RSTB") - ), - MTK_PIN( - PINCTRL_PIN(61, "GPIO61"), - "AA21", "mt7623", - MTK_EINT_FUNCTION(0, 42), - MTK_FUNCTION(0, "GPIO61"), - MTK_FUNCTION(1, "TEST_FD") - ), - MTK_PIN( - PINCTRL_PIN(62, "GPIO62"), - "AB22", "mt7623", - MTK_EINT_FUNCTION(0, 43), - MTK_FUNCTION(0, "GPIO62"), - MTK_FUNCTION(1, "TEST_FC") - ), - MTK_PIN( - PINCTRL_PIN(63, "WB_SCLK"), - "AC23", "mt7623", - MTK_EINT_FUNCTION(0, 44), - MTK_FUNCTION(0, "GPIO63"), - MTK_FUNCTION(1, "WB_SCLK") - ), - MTK_PIN( - PINCTRL_PIN(64, "WB_SDATA"), - "AB21", "mt7623", - MTK_EINT_FUNCTION(0, 45), - MTK_FUNCTION(0, "GPIO64"), - MTK_FUNCTION(1, "WB_SDATA") - ), - MTK_PIN( - PINCTRL_PIN(65, "WB_SEN"), - "AB24", "mt7623", - MTK_EINT_FUNCTION(0, 46), - MTK_FUNCTION(0, "GPIO65"), - MTK_FUNCTION(1, "WB_SEN") - ), - MTK_PIN( - PINCTRL_PIN(66, "WB_CRTL0"), - "AB20", "mt7623", - MTK_EINT_FUNCTION(0, 47), - MTK_FUNCTION(0, "GPIO66"), - MTK_FUNCTION(1, "WB_CRTL0") - ), - MTK_PIN( - PINCTRL_PIN(67, "WB_CRTL1"), - "AC20", "mt7623", - MTK_EINT_FUNCTION(0, 48), - MTK_FUNCTION(0, "GPIO67"), - MTK_FUNCTION(1, "WB_CRTL1") - ), - MTK_PIN( - PINCTRL_PIN(68, "WB_CRTL2"), - "AB19", "mt7623", - MTK_EINT_FUNCTION(0, 49), - MTK_FUNCTION(0, "GPIO68"), - MTK_FUNCTION(1, "WB_CRTL2") - ), - MTK_PIN( - PINCTRL_PIN(69, "WB_CRTL3"), - "AC19", "mt7623", - MTK_EINT_FUNCTION(0, 50), - MTK_FUNCTION(0, "GPIO69"), - MTK_FUNCTION(1, "WB_CRTL3") - ), - MTK_PIN( - PINCTRL_PIN(70, "WB_CRTL4"), - "AD19", "mt7623", - MTK_EINT_FUNCTION(0, 51), - MTK_FUNCTION(0, "GPIO70"), - MTK_FUNCTION(1, "WB_CRTL4") - ), - MTK_PIN( - PINCTRL_PIN(71, "WB_CRTL5"), - "AE19", "mt7623", - MTK_EINT_FUNCTION(0, 52), - MTK_FUNCTION(0, "GPIO71"), - MTK_FUNCTION(1, "WB_CRTL5") - ), - MTK_PIN( - PINCTRL_PIN(72, "I2S0_DATA_IN"), - "AA20", "mt7623", - MTK_EINT_FUNCTION(0, 53), - MTK_FUNCTION(0, "GPIO72"), - MTK_FUNCTION(1, "I2S0_DATA_IN"), - MTK_FUNCTION(3, "PCM_RX"), - MTK_FUNCTION(4, "PWM0"), - MTK_FUNCTION(5, "DISP_PWM"), - MTK_FUNCTION(6, "AP_I2S_DI") - ), - MTK_PIN( - PINCTRL_PIN(73, "I2S0_LRCK"), - "Y20", "mt7623", - MTK_EINT_FUNCTION(0, 54), - MTK_FUNCTION(0, "GPIO73"), - MTK_FUNCTION(1, "I2S0_LRCK"), - MTK_FUNCTION(3, "PCM_SYNC"), - MTK_FUNCTION(6, "AP_I2S_LRCK") - ), - MTK_PIN( - PINCTRL_PIN(74, "I2S0_BCK"), - "Y19", "mt7623", - MTK_EINT_FUNCTION(0, 55), - MTK_FUNCTION(0, "GPIO74"), - MTK_FUNCTION(1, "I2S0_BCK"), - MTK_FUNCTION(3, "PCM_CLK0"), - MTK_FUNCTION(6, "AP_I2S_BCK") - ), - MTK_PIN( - PINCTRL_PIN(75, "SDA0"), - "K19", "mt7623", - MTK_EINT_FUNCTION(0, 56), - MTK_FUNCTION(0, "GPIO75"), - MTK_FUNCTION(1, "SDA0") - ), - MTK_PIN( - PINCTRL_PIN(76, "SCL0"), - "K20", "mt7623", - MTK_EINT_FUNCTION(0, 57), - MTK_FUNCTION(0, "GPIO76"), - MTK_FUNCTION(1, "SCL0") - ), - MTK_PIN( - PINCTRL_PIN(77, "GPIO77"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO77") - ), - MTK_PIN( - PINCTRL_PIN(78, "GPIO78"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO78") - ), - MTK_PIN( - PINCTRL_PIN(79, "GPIO79"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO79") - ), - MTK_PIN( - PINCTRL_PIN(80, "GPIO80"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO80") - ), - MTK_PIN( - PINCTRL_PIN(81, "GPIO81"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO81") - ), - MTK_PIN( - PINCTRL_PIN(82, "GPIO82"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO82") - ), - MTK_PIN( - PINCTRL_PIN(83, "LCM_RST"), - "V16", "mt7623", - MTK_EINT_FUNCTION(0, 64), - MTK_FUNCTION(0, "GPIO83"), - MTK_FUNCTION(1, "LCM_RST") - ), - MTK_PIN( - PINCTRL_PIN(84, "DSI_TE"), - "V14", "mt7623", - MTK_EINT_FUNCTION(0, 65), - MTK_FUNCTION(0, "GPIO84"), - MTK_FUNCTION(1, "DSI_TE") - ), - MTK_PIN( - PINCTRL_PIN(85, "GPIO85"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO85") - ), - MTK_PIN( - PINCTRL_PIN(86, "GPIO86"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO86") - ), - MTK_PIN( - PINCTRL_PIN(87, "GPIO87"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO87") - ), - MTK_PIN( - PINCTRL_PIN(88, "GPIO88"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO88") - ), - MTK_PIN( - PINCTRL_PIN(89, "GPIO89"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO89") - ), - MTK_PIN( - PINCTRL_PIN(90, "GPIO90"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO90") - ), - MTK_PIN( - PINCTRL_PIN(91, "GPIO91"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO91") - ), - MTK_PIN( - PINCTRL_PIN(92, "GPIO92"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO92") - ), - MTK_PIN( - PINCTRL_PIN(93, "GPIO93"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO93") - ), - MTK_PIN( - PINCTRL_PIN(94, "GPIO94"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO94") - ), - MTK_PIN( - PINCTRL_PIN(95, "MIPI_TCN"), - "AB14", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO95"), - MTK_FUNCTION(1, "TCN") - ), - MTK_PIN( - PINCTRL_PIN(96, "MIPI_TCP"), - "AC14", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO96"), - MTK_FUNCTION(1, "TCP") - ), - MTK_PIN( - PINCTRL_PIN(97, "MIPI_TDN1"), - "AE15", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO97"), - MTK_FUNCTION(1, "TDN1") - ), - MTK_PIN( - PINCTRL_PIN(98, "MIPI_TDP1"), - "AD15", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO98"), - MTK_FUNCTION(1, "TDP1") - ), - MTK_PIN( - PINCTRL_PIN(99, "MIPI_TDN0"), - "AB15", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO99"), - MTK_FUNCTION(1, "TDN0") - ), - MTK_PIN( - PINCTRL_PIN(100, "MIPI_TDP0"), - "AC15", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO100"), - MTK_FUNCTION(1, "TDP0") - ), - MTK_PIN( - PINCTRL_PIN(101, "GPIO101"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO101") - ), - MTK_PIN( - PINCTRL_PIN(102, "GPIO102"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO102") - ), - MTK_PIN( - PINCTRL_PIN(103, "GPIO103"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO103") - ), - MTK_PIN( - PINCTRL_PIN(104, "GPIO104"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO104") - ), - MTK_PIN( - PINCTRL_PIN(105, "MSDC1_CMD"), - "AD2", "mt7623", - MTK_EINT_FUNCTION(0, 78), - MTK_FUNCTION(0, "GPIO105"), - MTK_FUNCTION(1, "MSDC1_CMD"), - MTK_FUNCTION(3, "SDA1"), - MTK_FUNCTION(6, "I2SOUT_BCK") - ), - MTK_PIN( - PINCTRL_PIN(106, "MSDC1_CLK"), - "AD3", "mt7623", - MTK_EINT_FUNCTION(0, 79), - MTK_FUNCTION(0, "GPIO106"), - MTK_FUNCTION(1, "MSDC1_CLK"), - MTK_FUNCTION(3, "SCL1"), - MTK_FUNCTION(6, "I2SOUT_LRCK") - ), - MTK_PIN( - PINCTRL_PIN(107, "MSDC1_DAT0"), - "AE2", "mt7623", - MTK_EINT_FUNCTION(0, 80), - MTK_FUNCTION(0, "GPIO107"), - MTK_FUNCTION(1, "MSDC1_DAT0"), - MTK_FUNCTION(5, "UTXD0"), - MTK_FUNCTION(6, "I2SOUT_DATA_OUT") - ), - MTK_PIN( - PINCTRL_PIN(108, "MSDC1_DAT1"), - "AC1", "mt7623", - MTK_EINT_FUNCTION(0, 81), - MTK_FUNCTION(0, "GPIO108"), - MTK_FUNCTION(1, "MSDC1_DAT1"), - MTK_FUNCTION(3, "PWM0"), - MTK_FUNCTION(5, "URXD0"), - MTK_FUNCTION(6, "PWM1") - ), - MTK_PIN( - PINCTRL_PIN(109, "MSDC1_DAT2"), - "AC3", "mt7623", - MTK_EINT_FUNCTION(0, 82), - MTK_FUNCTION(0, "GPIO109"), - MTK_FUNCTION(1, "MSDC1_DAT2"), - MTK_FUNCTION(3, "SDA2"), - MTK_FUNCTION(5, "UTXD1"), - MTK_FUNCTION(6, "PWM2") - ), - MTK_PIN( - PINCTRL_PIN(110, "MSDC1_DAT3"), - "AC4", "mt7623", - MTK_EINT_FUNCTION(0, 83), - MTK_FUNCTION(0, "GPIO110"), - MTK_FUNCTION(1, "MSDC1_DAT3"), - MTK_FUNCTION(3, "SCL2"), - MTK_FUNCTION(5, "URXD1"), - MTK_FUNCTION(6, "PWM3") - ), - MTK_PIN( - PINCTRL_PIN(111, "MSDC0_DAT7"), - "A2", "mt7623", - MTK_EINT_FUNCTION(0, 84), - MTK_FUNCTION(0, "GPIO111"), - MTK_FUNCTION(1, "MSDC0_DAT7"), - MTK_FUNCTION(4, "NLD7") - ), - MTK_PIN( - PINCTRL_PIN(112, "MSDC0_DAT6"), - "B3", "mt7623", - MTK_EINT_FUNCTION(0, 85), - MTK_FUNCTION(0, "GPIO112"), - MTK_FUNCTION(1, "MSDC0_DAT6"), - MTK_FUNCTION(4, "NLD6") - ), - MTK_PIN( - PINCTRL_PIN(113, "MSDC0_DAT5"), - "C4", "mt7623", - MTK_EINT_FUNCTION(0, 86), - MTK_FUNCTION(0, "GPIO113"), - MTK_FUNCTION(1, "MSDC0_DAT5"), - MTK_FUNCTION(4, "NLD5") - ), - MTK_PIN( - PINCTRL_PIN(114, "MSDC0_DAT4"), - "A4", "mt7623", - MTK_EINT_FUNCTION(0, 87), - MTK_FUNCTION(0, "GPIO114"), - MTK_FUNCTION(1, "MSDC0_DAT4"), - MTK_FUNCTION(4, "NLD4") - ), - MTK_PIN( - PINCTRL_PIN(115, "MSDC0_RSTB"), - "C5", "mt7623", - MTK_EINT_FUNCTION(0, 88), - MTK_FUNCTION(0, "GPIO115"), - MTK_FUNCTION(1, "MSDC0_RSTB"), - MTK_FUNCTION(4, "NLD8") - ), - MTK_PIN( - PINCTRL_PIN(116, "MSDC0_CMD"), - "D5", "mt7623", - MTK_EINT_FUNCTION(0, 89), - MTK_FUNCTION(0, "GPIO116"), - MTK_FUNCTION(1, "MSDC0_CMD"), - MTK_FUNCTION(4, "NALE") - ), - MTK_PIN( - PINCTRL_PIN(117, "MSDC0_CLK"), - "B1", "mt7623", - MTK_EINT_FUNCTION(0, 90), - MTK_FUNCTION(0, "GPIO117"), - MTK_FUNCTION(1, "MSDC0_CLK"), - MTK_FUNCTION(4, "NWEB") - ), - MTK_PIN( - PINCTRL_PIN(118, "MSDC0_DAT3"), - "D6", "mt7623", - MTK_EINT_FUNCTION(0, 91), - MTK_FUNCTION(0, "GPIO118"), - MTK_FUNCTION(1, "MSDC0_DAT3"), - MTK_FUNCTION(4, "NLD3") - ), - MTK_PIN( - PINCTRL_PIN(119, "MSDC0_DAT2"), - "B2", "mt7623", - MTK_EINT_FUNCTION(0, 92), - MTK_FUNCTION(0, "GPIO119"), - MTK_FUNCTION(1, "MSDC0_DAT2"), - MTK_FUNCTION(4, "NLD2") - ), - MTK_PIN( - PINCTRL_PIN(120, "MSDC0_DAT1"), - "A3", "mt7623", - MTK_EINT_FUNCTION(0, 93), - MTK_FUNCTION(0, "GPIO120"), - MTK_FUNCTION(1, "MSDC0_DAT1"), - MTK_FUNCTION(4, "NLD1") - ), - MTK_PIN( - PINCTRL_PIN(121, "MSDC0_DAT0"), - "B4", "mt7623", - MTK_EINT_FUNCTION(0, 94), - MTK_FUNCTION(0, "GPIO121"), - MTK_FUNCTION(1, "MSDC0_DAT0"), - MTK_FUNCTION(4, "NLD0"), - MTK_FUNCTION(5, "WATCHDOG") - ), - MTK_PIN( - PINCTRL_PIN(122, "GPIO122"), - "H17", "mt7623", - MTK_EINT_FUNCTION(0, 95), - MTK_FUNCTION(0, "GPIO122"), - MTK_FUNCTION(1, "TEST"), - MTK_FUNCTION(4, "SDA2"), - MTK_FUNCTION(5, "URXD0") - ), - MTK_PIN( - PINCTRL_PIN(123, "GPIO123"), - "F17", "mt7623", - MTK_EINT_FUNCTION(0, 96), - MTK_FUNCTION(0, "GPIO123"), - MTK_FUNCTION(1, "TEST"), - MTK_FUNCTION(4, "SCL2"), - MTK_FUNCTION(5, "UTXD0") - ), - MTK_PIN( - PINCTRL_PIN(124, "GPIO124"), - "H18", "mt7623", - MTK_EINT_FUNCTION(0, 97), - MTK_FUNCTION(0, "GPIO124"), - MTK_FUNCTION(1, "TEST"), - MTK_FUNCTION(4, "SDA1"), - MTK_FUNCTION(5, "PWM3") - ), - MTK_PIN( - PINCTRL_PIN(125, "GPIO125"), - "G17", "mt7623", - MTK_EINT_FUNCTION(0, 98), - MTK_FUNCTION(0, "GPIO125"), - MTK_FUNCTION(1, "TEST"), - MTK_FUNCTION(4, "SCL1"), - MTK_FUNCTION(5, "PWM4") - ), - MTK_PIN( - PINCTRL_PIN(126, "I2S0_MCLK"), - "AA19", "mt7623", - MTK_EINT_FUNCTION(0, 99), - MTK_FUNCTION(0, "GPIO126"), - MTK_FUNCTION(1, "I2S0_MCLK"), - MTK_FUNCTION(6, "AP_I2S_MCLK") - ), - MTK_PIN( - PINCTRL_PIN(127, "GPIO127"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO127") - ), - MTK_PIN( - PINCTRL_PIN(128, "GPIO128"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO128") - ), - MTK_PIN( - PINCTRL_PIN(129, "GPIO129"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO129") - ), - MTK_PIN( - PINCTRL_PIN(130, "GPIO130"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO130") - ), - MTK_PIN( - PINCTRL_PIN(131, "GPIO131"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO131") - ), - MTK_PIN( - PINCTRL_PIN(132, "GPIO132"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO132") - ), - MTK_PIN( - PINCTRL_PIN(133, "GPIO133"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO133") - ), - MTK_PIN( - PINCTRL_PIN(134, "GPIO134"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO134") - ), - MTK_PIN( - PINCTRL_PIN(135, "GPIO135"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO135") - ), - MTK_PIN( - PINCTRL_PIN(136, "GPIO136"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO136") - ), - MTK_PIN( - PINCTRL_PIN(137, "GPIO137"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO137") - ), - MTK_PIN( - PINCTRL_PIN(138, "GPIO138"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO138") - ), - MTK_PIN( - PINCTRL_PIN(139, "GPIO139"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO139") - ), - MTK_PIN( - PINCTRL_PIN(140, "GPIO140"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO140") - ), - MTK_PIN( - PINCTRL_PIN(141, "GPIO141"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO141") - ), - MTK_PIN( - PINCTRL_PIN(142, "GPIO142"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO142") - ), - MTK_PIN( - PINCTRL_PIN(143, "GPIO143"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO143") - ), - MTK_PIN( - PINCTRL_PIN(144, "GPIO144"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO144") - ), - MTK_PIN( - PINCTRL_PIN(145, "GPIO145"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO145") - ), - MTK_PIN( - PINCTRL_PIN(146, "GPIO146"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO146") - ), - MTK_PIN( - PINCTRL_PIN(147, "GPIO147"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO147") - ), - MTK_PIN( - PINCTRL_PIN(148, "GPIO148"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO148") - ), - MTK_PIN( - PINCTRL_PIN(149, "GPIO149"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO149") - ), - MTK_PIN( - PINCTRL_PIN(150, "GPIO150"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO150") - ), - MTK_PIN( - PINCTRL_PIN(151, "GPIO151"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO151") - ), - MTK_PIN( - PINCTRL_PIN(152, "GPIO152"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO152") - ), - MTK_PIN( - PINCTRL_PIN(153, "GPIO153"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO153") - ), - MTK_PIN( - PINCTRL_PIN(154, "GPIO154"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO154") - ), - MTK_PIN( - PINCTRL_PIN(155, "GPIO155"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO155") - ), - MTK_PIN( - PINCTRL_PIN(156, "GPIO156"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO156") - ), - MTK_PIN( - PINCTRL_PIN(157, "GPIO157"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO157") - ), - MTK_PIN( - PINCTRL_PIN(158, "GPIO158"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO158") - ), - MTK_PIN( - PINCTRL_PIN(159, "GPIO159"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO159") - ), - MTK_PIN( - PINCTRL_PIN(160, "GPIO160"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO160") - ), - MTK_PIN( - PINCTRL_PIN(161, "GPIO161"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO161") - ), - MTK_PIN( - PINCTRL_PIN(162, "GPIO162"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO162") - ), - MTK_PIN( - PINCTRL_PIN(163, "GPIO163"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO163") - ), - MTK_PIN( - PINCTRL_PIN(164, "GPIO164"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO164") - ), - MTK_PIN( - PINCTRL_PIN(165, "GPIO165"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO165") - ), - MTK_PIN( - PINCTRL_PIN(166, "GPIO166"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO166") - ), - MTK_PIN( - PINCTRL_PIN(167, "GPIO167"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO167") - ), - MTK_PIN( - PINCTRL_PIN(168, "GPIO168"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO168") - ), - MTK_PIN( - PINCTRL_PIN(169, "GPIO169"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO169") - ), - MTK_PIN( - PINCTRL_PIN(170, "GPIO170"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO170") - ), - MTK_PIN( - PINCTRL_PIN(171, "GPIO171"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO171") - ), - MTK_PIN( - PINCTRL_PIN(172, "GPIO172"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO172") - ), - MTK_PIN( - PINCTRL_PIN(173, "GPIO173"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO173") - ), - MTK_PIN( - PINCTRL_PIN(174, "GPIO174"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO174") - ), - MTK_PIN( - PINCTRL_PIN(175, "GPIO175"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO175") - ), - MTK_PIN( - PINCTRL_PIN(176, "GPIO176"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO176") - ), - MTK_PIN( - PINCTRL_PIN(177, "GPIO177"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO177") - ), - MTK_PIN( - PINCTRL_PIN(178, "GPIO178"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO178") - ), - MTK_PIN( - PINCTRL_PIN(179, "GPIO179"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO179") - ), - MTK_PIN( - PINCTRL_PIN(180, "GPIO180"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO180") - ), - MTK_PIN( - PINCTRL_PIN(181, "GPIO181"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO181") - ), - MTK_PIN( - PINCTRL_PIN(182, "GPIO182"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO182") - ), - MTK_PIN( - PINCTRL_PIN(183, "GPIO183"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO183") - ), - MTK_PIN( - PINCTRL_PIN(184, "GPIO184"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO184") - ), - MTK_PIN( - PINCTRL_PIN(185, "GPIO185"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO185") - ), - MTK_PIN( - PINCTRL_PIN(186, "GPIO186"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO186") - ), - MTK_PIN( - PINCTRL_PIN(187, "GPIO187"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO187") - ), - MTK_PIN( - PINCTRL_PIN(188, "GPIO188"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO188") - ), - MTK_PIN( - PINCTRL_PIN(189, "GPIO189"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO189") - ), - MTK_PIN( - PINCTRL_PIN(190, "GPIO190"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO190") - ), - MTK_PIN( - PINCTRL_PIN(191, "GPIO191"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO191") - ), - MTK_PIN( - PINCTRL_PIN(192, "GPIO192"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO192") - ), - MTK_PIN( - PINCTRL_PIN(193, "GPIO193"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO193") - ), - MTK_PIN( - PINCTRL_PIN(194, "GPIO194"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO194") - ), - MTK_PIN( - PINCTRL_PIN(195, "GPIO195"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO195") - ), - MTK_PIN( - PINCTRL_PIN(196, "GPIO196"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO196") - ), - MTK_PIN( - PINCTRL_PIN(197, "GPIO197"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO197") - ), - MTK_PIN( - PINCTRL_PIN(198, "GPIO198"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO198") - ), - MTK_PIN( - PINCTRL_PIN(199, "SPI1_CK"), - "E19", "mt7623", - MTK_EINT_FUNCTION(0, 111), - MTK_FUNCTION(0, "GPIO199"), - MTK_FUNCTION(1, "SPI1_CK") - ), - MTK_PIN( - PINCTRL_PIN(200, "URXD2"), - "K18", "mt7623", - MTK_EINT_FUNCTION(0, 112), - MTK_FUNCTION(0, "GPIO200"), - MTK_FUNCTION(6, "URXD2") - ), - MTK_PIN( - PINCTRL_PIN(201, "UTXD2"), - "L18", "mt7623", - MTK_EINT_FUNCTION(0, 113), - MTK_FUNCTION(0, "GPIO201"), - MTK_FUNCTION(6, "UTXD2") - ), - MTK_PIN( - PINCTRL_PIN(202, "GPIO202"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO202") - ), - MTK_PIN( - PINCTRL_PIN(203, "PWM0"), - "AA16", "mt7623", - MTK_EINT_FUNCTION(0, 115), - MTK_FUNCTION(0, "GPIO203"), - MTK_FUNCTION(1, "PWM0"), - MTK_FUNCTION(2, "DISP_PWM") - ), - MTK_PIN( - PINCTRL_PIN(204, "PWM1"), - "Y16", "mt7623", - MTK_EINT_FUNCTION(0, 116), - MTK_FUNCTION(0, "GPIO204"), - MTK_FUNCTION(1, "PWM1") - ), - MTK_PIN( - PINCTRL_PIN(205, "PWM2"), - "AA15", "mt7623", - MTK_EINT_FUNCTION(0, 117), - MTK_FUNCTION(0, "GPIO205"), - MTK_FUNCTION(1, "PWM2") - ), - MTK_PIN( - PINCTRL_PIN(206, "PWM3"), - "AA17", "mt7623", - MTK_EINT_FUNCTION(0, 118), - MTK_FUNCTION(0, "GPIO206"), - MTK_FUNCTION(1, "PWM3") - ), - MTK_PIN( - PINCTRL_PIN(207, "PWM4"), - "Y15", "mt7623", - MTK_EINT_FUNCTION(0, 119), - MTK_FUNCTION(0, "GPIO207"), - MTK_FUNCTION(1, "PWM4") - ), - MTK_PIN( - PINCTRL_PIN(208, "AUD_EXT_CK1"), - "W14", "mt7623", - MTK_EINT_FUNCTION(0, 120), - MTK_FUNCTION(0, "GPIO208"), - MTK_FUNCTION(1, "AUD_EXT_CK1"), - MTK_FUNCTION(2, "PWM0"), - MTK_FUNCTION(3, "PCIE0_PERST_N"), - MTK_FUNCTION(5, "DISP_PWM") - ), - MTK_PIN( - PINCTRL_PIN(209, "AUD_EXT_CK2"), - "V15", "mt7623", - MTK_EINT_FUNCTION(0, 121), - MTK_FUNCTION(0, "GPIO209"), - MTK_FUNCTION(1, "AUD_EXT_CK2"), - MTK_FUNCTION(2, "MSDC1_WP"), - MTK_FUNCTION(3, "PCIE1_PERST_N"), - MTK_FUNCTION(5, "PWM1") - ), - MTK_PIN( - PINCTRL_PIN(210, "GPIO210"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO210") - ), - MTK_PIN( - PINCTRL_PIN(211, "GPIO211"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO211") - ), - MTK_PIN( - PINCTRL_PIN(212, "GPIO212"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO212") - ), - MTK_PIN( - PINCTRL_PIN(213, "GPIO213"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO213") - ), - MTK_PIN( - PINCTRL_PIN(214, "GPIO214"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO214") - ), - MTK_PIN( - PINCTRL_PIN(215, "GPIO215"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO215") - ), - MTK_PIN( - PINCTRL_PIN(216, "GPIO216"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO216") - ), - MTK_PIN( - PINCTRL_PIN(217, "GPIO217"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO217") - ), - MTK_PIN( - PINCTRL_PIN(218, "GPIO218"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO218") - ), - MTK_PIN( - PINCTRL_PIN(219, "GPIO219"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO219") - ), - MTK_PIN( - PINCTRL_PIN(220, "GPIO220"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO220") - ), - MTK_PIN( - PINCTRL_PIN(221, "GPIO221"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO221") - ), - MTK_PIN( - PINCTRL_PIN(222, "GPIO222"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO222") - ), - MTK_PIN( - PINCTRL_PIN(223, "GPIO223"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO223") - ), - MTK_PIN( - PINCTRL_PIN(224, "GPIO224"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO224") - ), - MTK_PIN( - PINCTRL_PIN(225, "GPIO225"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO225") - ), - MTK_PIN( - PINCTRL_PIN(226, "GPIO226"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO226") - ), - MTK_PIN( - PINCTRL_PIN(227, "GPIO227"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO227") - ), - MTK_PIN( - PINCTRL_PIN(228, "GPIO228"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO228") - ), - MTK_PIN( - PINCTRL_PIN(229, "GPIO229"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO229") - ), - MTK_PIN( - PINCTRL_PIN(230, "GPIO230"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO230") - ), - MTK_PIN( - PINCTRL_PIN(231, "GPIO231"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO231") - ), - MTK_PIN( - PINCTRL_PIN(232, "GPIO232"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO232") - ), - MTK_PIN( - PINCTRL_PIN(233, "GPIO233"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO233") - ), - MTK_PIN( - PINCTRL_PIN(234, "GPIO234"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO234") - ), - MTK_PIN( - PINCTRL_PIN(235, "GPIO235"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO235") - ), - MTK_PIN( - PINCTRL_PIN(236, "EXT_SDIO3"), - "A8", "mt7623", - MTK_EINT_FUNCTION(0, 122), - MTK_FUNCTION(0, "GPIO236"), - MTK_FUNCTION(1, "EXT_SDIO3"), - MTK_FUNCTION(2, "IDDIG") - ), - MTK_PIN( - PINCTRL_PIN(237, "EXT_SDIO2"), - "D8", "mt7623", - MTK_EINT_FUNCTION(0, 123), - MTK_FUNCTION(0, "GPIO237"), - MTK_FUNCTION(1, "EXT_SDIO2"), - MTK_FUNCTION(2, "DRV_VBUS") - ), - MTK_PIN( - PINCTRL_PIN(238, "EXT_SDIO1"), - "D9", "mt7623", - MTK_EINT_FUNCTION(0, 124), - MTK_FUNCTION(0, "GPIO238"), - MTK_FUNCTION(1, "EXT_SDIO1") - ), - MTK_PIN( - PINCTRL_PIN(239, "EXT_SDIO0"), - "B8", "mt7623", - MTK_EINT_FUNCTION(0, 125), - MTK_FUNCTION(0, "GPIO239"), - MTK_FUNCTION(1, "EXT_SDIO0") - ), - MTK_PIN( - PINCTRL_PIN(240, "EXT_XCS"), - "C9", "mt7623", - MTK_EINT_FUNCTION(0, 126), - MTK_FUNCTION(0, "GPIO240"), - MTK_FUNCTION(1, "EXT_XCS") - ), - MTK_PIN( - PINCTRL_PIN(241, "EXT_SCK"), - "C8", "mt7623", - MTK_EINT_FUNCTION(0, 127), - MTK_FUNCTION(0, "GPIO241"), - MTK_FUNCTION(1, "EXT_SCK") - ), - MTK_PIN( - PINCTRL_PIN(242, "URTS2"), - "G18", "mt7623", - MTK_EINT_FUNCTION(0, 128), - MTK_FUNCTION(0, "GPIO242"), - MTK_FUNCTION(1, "URTS2"), - MTK_FUNCTION(2, "UTXD3"), - MTK_FUNCTION(3, "URXD3"), - MTK_FUNCTION(4, "SCL1") - ), - MTK_PIN( - PINCTRL_PIN(243, "UCTS2"), - "H19", "mt7623", - MTK_EINT_FUNCTION(0, 129), - MTK_FUNCTION(0, "GPIO243"), - MTK_FUNCTION(1, "UCTS2"), - MTK_FUNCTION(2, "URXD3"), - MTK_FUNCTION(3, "UTXD3"), - MTK_FUNCTION(4, "SDA1") - ), - MTK_PIN( - PINCTRL_PIN(244, "GPIO244"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO244") - ), - MTK_PIN( - PINCTRL_PIN(245, "GPIO245"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO245") - ), - MTK_PIN( - PINCTRL_PIN(246, "GPIO246"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO246") - ), - MTK_PIN( - PINCTRL_PIN(247, "GPIO247"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO247") - ), - MTK_PIN( - PINCTRL_PIN(248, "GPIO248"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO248") - ), - MTK_PIN( - PINCTRL_PIN(249, "GPIO249"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO249") - ), - MTK_PIN( - PINCTRL_PIN(250, "GPIO250"), - "A15", "mt7623", - MTK_EINT_FUNCTION(0, 135), - MTK_FUNCTION(0, "GPIO250"), - MTK_FUNCTION(1, "TEST_MD7"), - MTK_FUNCTION(6, "PCIE0_CLKREQ_N") - ), - MTK_PIN( - PINCTRL_PIN(251, "GPIO251"), - "B15", "mt7623", - MTK_EINT_FUNCTION(0, 136), - MTK_FUNCTION(0, "GPIO251"), - MTK_FUNCTION(1, "TEST_MD6"), - MTK_FUNCTION(6, "PCIE0_WAKE_N") - ), - MTK_PIN( - PINCTRL_PIN(252, "GPIO252"), - "C16", "mt7623", - MTK_EINT_FUNCTION(0, 137), - MTK_FUNCTION(0, "GPIO252"), - MTK_FUNCTION(1, "TEST_MD5"), - MTK_FUNCTION(6, "PCIE1_CLKREQ_N") - ), - MTK_PIN( - PINCTRL_PIN(253, "GPIO253"), - "D17", "mt7623", - MTK_EINT_FUNCTION(0, 138), - MTK_FUNCTION(0, "GPIO253"), - MTK_FUNCTION(1, "TEST_MD4"), - MTK_FUNCTION(6, "PCIE1_WAKE_N") - ), - MTK_PIN( - PINCTRL_PIN(254, "GPIO254"), - "D16", "mt7623", - MTK_EINT_FUNCTION(0, 139), - MTK_FUNCTION(0, "GPIO254"), - MTK_FUNCTION(1, "TEST_MD3"), - MTK_FUNCTION(6, "PCIE2_CLKREQ_N") - ), - MTK_PIN( - PINCTRL_PIN(255, "GPIO255"), - "C17", "mt7623", - MTK_EINT_FUNCTION(0, 140), - MTK_FUNCTION(0, "GPIO255"), - MTK_FUNCTION(1, "TEST_MD2"), - MTK_FUNCTION(6, "PCIE2_WAKE_N") - ), - MTK_PIN( - PINCTRL_PIN(256, "GPIO256"), - "B17", "mt7623", - MTK_EINT_FUNCTION(0, 141), - MTK_FUNCTION(0, "GPIO256"), - MTK_FUNCTION(1, "TEST_MD1") - ), - MTK_PIN( - PINCTRL_PIN(257, "GPIO257"), - "C15", "mt7623", - MTK_EINT_FUNCTION(0, 142), - MTK_FUNCTION(0, "GPIO257"), - MTK_FUNCTION(1, "TEST_MD0") - ), - MTK_PIN( - PINCTRL_PIN(258, "GPIO258"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO258") - ), - MTK_PIN( - PINCTRL_PIN(259, "GPIO259"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO259") - ), - MTK_PIN( - PINCTRL_PIN(260, "GPIO260"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO260") - ), - MTK_PIN( - PINCTRL_PIN(261, "MSDC1_INS"), - "AD1", "mt7623", - MTK_EINT_FUNCTION(0, 146), - MTK_FUNCTION(0, "GPIO261"), - MTK_FUNCTION(1, "MSDC1_INS") - ), - MTK_PIN( - PINCTRL_PIN(262, "G2_TXEN"), - "A23", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO262"), - MTK_FUNCTION(1, "G2_TXEN") - ), - MTK_PIN( - PINCTRL_PIN(263, "G2_TXD3"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO263"), - MTK_FUNCTION(1, "G2_TXD3") - ), - MTK_PIN( - PINCTRL_PIN(264, "G2_TXD2"), - "C24", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO264"), - MTK_FUNCTION(1, "G2_TXD2") - ), - MTK_PIN( - PINCTRL_PIN(265, "G2_TXD1"), - "B25", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO265"), - MTK_FUNCTION(1, "G2_TXD1") - ), - MTK_PIN( - PINCTRL_PIN(266, "G2_TXD0"), - "A24", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO266"), - MTK_FUNCTION(1, "G2_TXD0") - ), - MTK_PIN( - PINCTRL_PIN(267, "G2_TXCLK"), - "C23", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO267"), - MTK_FUNCTION(1, "G2_TXC") - ), - MTK_PIN( - PINCTRL_PIN(268, "G2_RXCLK"), - "B23", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO268"), - MTK_FUNCTION(1, "G2_RXC") - ), - MTK_PIN( - PINCTRL_PIN(269, "G2_RXD0"), - "D21", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO269"), - MTK_FUNCTION(1, "G2_RXD0") - ), - MTK_PIN( - PINCTRL_PIN(270, "G2_RXD1"), - "B22", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO270"), - MTK_FUNCTION(1, "G2_RXD1") - ), - MTK_PIN( - PINCTRL_PIN(271, "G2_RXD2"), - "A22", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO271"), - MTK_FUNCTION(1, "G2_RXD2") - ), - MTK_PIN( - PINCTRL_PIN(272, "G2_RXD3"), - "C22", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO272"), - MTK_FUNCTION(1, "G2_RXD3") - ), - MTK_PIN( - PINCTRL_PIN(273, "GPIO273"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO273") - ), - MTK_PIN( - PINCTRL_PIN(274, "G2_RXDV"), - "C21", "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO274"), - MTK_FUNCTION(1, "G2_RXDV") - ), - MTK_PIN( - PINCTRL_PIN(275, "G2_MDC"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO275"), - MTK_FUNCTION(1, "MDC") - ), - MTK_PIN( - PINCTRL_PIN(276, "G2_MDIO"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO276"), - MTK_FUNCTION(1, "MDIO") - ), - MTK_PIN( - PINCTRL_PIN(277, "GPIO277"), - NULL, "mt7623", - MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT), - MTK_FUNCTION(0, "GPIO277") - ), - MTK_PIN( - PINCTRL_PIN(278, "JTAG_RESET"), - "H20", "mt7623", - MTK_EINT_FUNCTION(0, 147), - MTK_FUNCTION(0, "GPIO278"), - MTK_FUNCTION(1, "JTAG_RESET") - ), -}; - -#endif /* __PINCTRL_MTK_MT7623_H */ -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH v2 02/30] pinctrl: mediatek: reuse pinctrl driver for mt7623 2017-04-26 9:25 ` [PATCH v2 02/30] pinctrl: mediatek: reuse pinctrl driver " sean.wang @ 2017-04-28 8:01 ` Linus Walleij 2017-05-01 6:44 ` Sean Wang 0 siblings, 1 reply; 46+ messages in thread From: Linus Walleij @ 2017-04-28 8:01 UTC (permalink / raw) To: sean.wang Cc: Rob Herring, Matthias Brugger, John Crispin, Mark Rutland, Russell King, devicetree, moderated list:ARM/Mediatek SoC support, linux-arm-kernel, linux-gpio, linux-kernel On Wed, Apr 26, 2017 at 11:25 AM, <sean.wang@mediatek.com> wrote: > From: Sean Wang <sean.wang@mediatek.com> > > mt7623 pinctrl driver can be compatible with mt2701 one, > so the patch reuses the driver and deletes those redundant > ones. > > Cc: John Crispin <john@phrozen.org> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> Partly correct. > "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl. > - "mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl. NO don't do this. "compatible" means exactly this: this hardware is compatible with this driver. That is why we have it! So instead of mt7623 pretending to be mt2701, let the mt2701 driver list that it is compatible with mt7623, simple. So patch pinctrl-mt2701.c mt2701_pctrl_match[] instead. Yours, Linus Walleij ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 02/30] pinctrl: mediatek: reuse pinctrl driver for mt7623 2017-04-28 8:01 ` Linus Walleij @ 2017-05-01 6:44 ` Sean Wang 0 siblings, 0 replies; 46+ messages in thread From: Sean Wang @ 2017-05-01 6:44 UTC (permalink / raw) To: Linus Walleij Cc: Rob Herring, Matthias Brugger, John Crispin, Mark Rutland, Russell King, devicetree, moderated list:ARM/Mediatek SoC support, linux-arm-kernel, linux-gpio, linux-kernel On Fri, 2017-04-28 at 10:01 +0200, Linus Walleij wrote: > On Wed, Apr 26, 2017 at 11:25 AM, <sean.wang@mediatek.com> wrote: > > > From: Sean Wang <sean.wang@mediatek.com> > > > > mt7623 pinctrl driver can be compatible with mt2701 one, > > so the patch reuses the driver and deletes those redundant > > ones. > > > > Cc: John Crispin <john@phrozen.org> > > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > > Partly correct. > > > "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl. > > - "mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl. > > NO don't do this. > > "compatible" means exactly this: this hardware is compatible with > this driver. That is why we have it! > > So instead of mt7623 pretending to be mt2701, let the mt2701 driver > list that it is compatible with mt7623, simple. > > So patch pinctrl-mt2701.c mt2701_pctrl_match[] instead. > Hi Linus, really appreciate your clear guidance and reviewing on this I will fix it up in the next version Sean > Yours, > Linus Walleij ^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v2 03/30] arm: dts: mt7623: add clock controller device nodes 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang 2017-04-26 9:25 ` [PATCH v2 01/30] pinctrl: mediatek: Add missing pinctrl bindings for mt7623 sean.wang 2017-04-26 9:25 ` [PATCH v2 02/30] pinctrl: mediatek: reuse pinctrl driver " sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 04/30] arm: dts: mt7623: add subsystem " sean.wang ` (27 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Add clock controller nodes for MT7623, including topckgen, infracfg, pericfg and apmixedsys. This patch also cleans up two oscillators that provide clocks for MT7623. Switch the uart clocks to the real ones while at it. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 64 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 55 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 402579a..b97b2ba 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/mt2701-clk.h> +#include <dt-bindings/reset/mt2701-resets.h> #include "skeleton64.dtsi" / { @@ -53,16 +55,18 @@ #clock-cells = <0>; }; - rtc_clk: dummy32k { + rtc32k: oscillator@1 { compatible = "fixed-clock"; - clock-frequency = <32000>; #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "rtc32k"; }; - uart_clk: dummy26m { + clk26m: oscillator@0 { compatible = "fixed-clock"; - clock-frequency = <26000000>; #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; }; timer { @@ -74,6 +78,32 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + topckgen: syscon@10000000 { + compatible = "mediatek,mt7623-topckgen", + "mediatek,mt2701-topckgen", + "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt7623-infracfg", + "mediatek,mt2701-infracfg", + "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt7623-pericfg", + "mediatek,mt2701-pericfg", + "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt7623-wdt", "mediatek,mt6589-wdt"; @@ -85,7 +115,7 @@ "mediatek,mt6577-timer"; reg = <0 0x10008000 0 0x80>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>; - clocks = <&system_clk>, <&rtc_clk>; + clocks = <&system_clk>, <&rtc32k>; clock-names = "system-clk", "rtc-clk"; }; @@ -98,6 +128,14 @@ reg = <0 0x10200100 0 0x1c>; }; + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt7623-apmixedsys", + "mediatek,mt2701-apmixedsys", + "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; @@ -114,7 +152,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART0_SEL>, + <&pericfg CLK_PERI_UART0>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -123,7 +163,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, + <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -132,7 +174,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART2_SEL>, + <&pericfg CLK_PERI_UART2>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -141,7 +185,9 @@ "mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART3_SEL>, + <&pericfg CLK_PERI_UART3>; + clock-names = "baud", "bus"; status = "disabled"; }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 04/30] arm: dts: mt7623: add subsystem clock controller device nodes 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (2 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 03/30] arm: dts: mt7623: add clock controller device nodes sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 05/30] arm: dts: mt7623: add power domain controller device node sean.wang ` (26 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Add MT7623 subsystem clock controllers for hifsys and ethsys. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index b97b2ba..54cff6a 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -190,4 +190,20 @@ clock-names = "baud", "bus"; status = "disabled"; }; + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + ethsys: syscon@1b000000 { + compatible = "mediatek,mt7623-ethsys", + "mediatek,mt2701-ethsys", + "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 05/30] arm: dts: mt7623: add power domain controller device node 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (3 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 04/30] arm: dts: mt7623: add subsystem " sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 06/30] arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi sean.wang ` (25 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Add power domain controller node (scpsys) for MT7623. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 54cff6a..adb2393 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mt2701-clk.h> +#include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/reset/mt2701-resets.h> #include "skeleton64.dtsi" @@ -104,6 +105,19 @@ #reset-cells = <1>; }; + scpsys: scpsys@10006000 { + compatible = "mediatek,mt7623-scpsys", + "mediatek,mt2701-scpsys", + "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + infracfg = <&infracfg>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MFG_SEL>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "mm", "mfg", "ethif"; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt7623-wdt", "mediatek,mt6589-wdt"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 06/30] arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (4 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 05/30] arm: dts: mt7623: add power domain controller device node sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 07/30] arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file sean.wang ` (24 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> We need to tell the driver what the timers frequency is and that the core has not be configured by the bootrom. Not doing so makes the unit not boot. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index adb2393..3cc0a3a 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -77,6 +77,8 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; }; topckgen: syscon@10000000 { -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 07/30] arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (5 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 06/30] arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-28 8:03 ` Linus Walleij 2017-04-26 9:25 ` [PATCH v2 08/30] arm: dts: mt7623: add pmic wrapper " sean.wang ` (23 subsequent siblings) 30 siblings, 1 reply; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Add pin controller node to the mt7623.dtsi file Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 3cc0a3a..1942bc7 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -15,7 +15,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mt2701-clk.h> +#include <dt-bindings/pinctrl/mt7623-pinfunc.h> #include <dt-bindings/power/mt2701-power.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/reset/mt2701-resets.h> #include "skeleton64.dtsi" @@ -107,6 +110,26 @@ #reset-cells = <1>; }; + pio: pinctrl@10005000 { + compatible = "mediatek,mt7623-pinctrl", + "mediatek,mt2701-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + + syscfg_pctl_a: syscfg@10005000 { + compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + scpsys: scpsys@10006000 { compatible = "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys", -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH v2 07/30] arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file 2017-04-26 9:25 ` [PATCH v2 07/30] arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file sean.wang @ 2017-04-28 8:03 ` Linus Walleij 0 siblings, 0 replies; 46+ messages in thread From: Linus Walleij @ 2017-04-28 8:03 UTC (permalink / raw) To: sean.wang Cc: Rob Herring, Matthias Brugger, John Crispin, Mark Rutland, Russell King, devicetree, moderated list:ARM/Mediatek SoC support, linux-arm-kernel, linux-gpio, linux-kernel On Wed, Apr 26, 2017 at 11:25 AM, <sean.wang@mediatek.com> wrote: > From: John Crispin <john@phrozen.org> > > Add pin controller node to the mt7623.dtsi file > > Signed-off-by: John Crispin <john@phrozen.org> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> (...) > + pio: pinctrl@10005000 { > + compatible = "mediatek,mt7623-pinctrl", > + "mediatek,mt2701-pinctrl"; This looks right. And that is why we should not delete that compatible string. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v2 08/30] arm: dts: mt7623: add pmic wrapper nodes to the mt7623 dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (6 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 07/30] arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 09/30] arm: dts: mt7623: add i2c nodes to the mt7623.dtsi file sean.wang ` (22 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Add PMIC wrapper node to the mt7623.dtsi file which is necessary for the control of PMIC from Mediatek. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 1942bc7..6adc21d 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -158,6 +158,19 @@ clock-names = "system-clk", "rtc-clk"; }; + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt7623-pwrap", + "mediatek,mt2701-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>; + reset-names = "pwrap"; + clocks = <&infracfg CLK_INFRA_PMICSPI>, + <&infracfg CLK_INFRA_PMICWRAP>; + clock-names = "spi", "wrap"; + }; + sysirq: interrupt-controller@10200100 { compatible = "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 09/30] arm: dts: mt7623: add i2c nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (7 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 08/30] arm: dts: mt7623: add pmic wrapper " sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 10/30] arm: dts: mt7623: add spi " sean.wang ` (21 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Add I2C nodes to the mt7623.dtsi file. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 45 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 6adc21d..adb4793 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -243,6 +243,51 @@ status = "disabled"; }; + i2c0: i2c@11007000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11007000 0 0x70>, + <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11008000 0 0x70>, + <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt7623-i2c", + "mediatek,mt6577-i2c"; + reg = <0 0x11009000 0 0x70>, + <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 10/30] arm: dts: mt7623: add spi nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (8 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 09/30] arm: dts: mt7623: add i2c nodes to the mt7623.dtsi file sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 11/30] arm: dts: mt7623: add nand " sean.wang ` (20 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add spi controller nodes to the mt7623.dtsi file Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index adb4793..131808c 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -288,6 +288,48 @@ status = "disabled"; }; + spi0: spi@1100a000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI0_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11016000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11016000 0 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI1_SEL>, + <&pericfg CLK_PERI_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11017000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt2701-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11017000 0 0x1000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI2_SEL>, + <&pericfg CLK_PERI_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 11/30] arm: dts: mt7623: add nand nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (9 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 10/30] arm: dts: mt7623: add spi " sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 12/30] arm: dts: mt7623: add mmc " sean.wang ` (19 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Add NAND/EEC nodes to the mt7623.dtsi file. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 131808c..f15d65a 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -330,6 +330,31 @@ status = "disabled"; }; + nandc: nfi@1100d000 { + compatible = "mediatek,mt7623-nfc", + "mediatek,mt2701-nfc"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + clocks = <&pericfg CLK_PERI_NFI>, + <&pericfg CLK_PERI_NFI_PAD>; + clock-names = "nfi_clk", "pad_clk"; + status = "disabled"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt7623-ecc", + "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 12/30] arm: dts: mt7623: add mmc nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (10 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 11/30] arm: dts: mt7623: add nand " sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 13/30] arm: dts: mt7623: add usb " sean.wang ` (18 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Add e/MMC nodes to the mt7623.dtsi file. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index f15d65a..1ea9b18 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -355,6 +355,28 @@ status = "disabled"; }; + mmc0: mmc@11230000 { + compatible = "mediatek,mt7623-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11230000 0 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_0>, + <&topckgen CLK_TOP_MSDC30_0_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt7623-mmc", + "mediatek,mt8135-mmc"; + reg = <0 0x11240000 0 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_1>, + <&topckgen CLK_TOP_MSDC30_1_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 13/30] arm: dts: mt7623: add usb nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (11 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 12/30] arm: dts: mt7623: add mmc " sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 14/30] arm: dts: mt7623: add pwm " sean.wang ` (17 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Add USB nodes to the mt7623.dtsi file. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 77 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 1ea9b18..56da5ba 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -377,12 +377,89 @@ status = "disabled"; }; + usb1: usb@1a1c0000 { + compatible = "mediatek,mt7623-xhci", + "mediatek,mt8173-xhci"; + reg = <0 0x1a1c0000 0 0x1000>, + <0 0x1a1c4700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>; + clocks = <&hifsys CLK_HIFSYS_USB0PHY>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "sys_ck", "free_ck"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; + status = "disabled"; + }; + + u3phy1: usb-phy@1a1c4000 { + compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; + reg = <0 0x1a1c4000 0 0x0700>; + clocks = <&clk26m>; + clock-names = "u3phya_ref"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port0: usb-phy@1a1c4800 { + reg = <0 0x1a1c4800 0 0x0100>; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@1a1c4900 { + reg = <0 0x1a1c4900 0 0x0700>; + #phy-cells = <1>; + status = "okay"; + }; + }; + + usb2: usb@1a240000 { + compatible = "mediatek,mt7623-xhci", + "mediatek,mt8173-xhci"; + reg = <0 0x1a240000 0 0x1000>, + <0 0x1a244700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>; + clocks = <&hifsys CLK_HIFSYS_USB1PHY>, + <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "sys_ck", "free_ck"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>; + status = "disabled"; + }; + + u3phy2: usb-phy@1a244000 { + compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy"; + reg = <0 0x1a244000 0 0x0700>; + clocks = <&clk26m>; + clock-names = "u3phya_ref"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port1: usb-phy@1a244800 { + reg = <0 0x1a244800 0 0x0100>; + #phy-cells = <1>; + status = "okay"; + }; + + u3port1: usb-phy@1a244900 { + reg = <0 0x1a244900 0 0x0700>; + #phy-cells = <1>; + status = "okay"; + }; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; ethsys: syscon@1b000000 { -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 14/30] arm: dts: mt7623: add pwm nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (12 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 13/30] arm: dts: mt7623: add usb " sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:25 ` [PATCH v2 15/30] arm: dts: mt7623: add ethernet " sean.wang ` (16 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add PWM nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 56da5ba..cfafaea 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -243,6 +243,22 @@ status = "disabled"; }; + pwm: pwm@11006000 { + compatible = "mediatek,mt7623-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM>, + <&pericfg CLK_PERI_PWM1>, + <&pericfg CLK_PERI_PWM2>, + <&pericfg CLK_PERI_PWM3>, + <&pericfg CLK_PERI_PWM4>, + <&pericfg CLK_PERI_PWM5>; + clock-names = "top", "main", "pwm1", "pwm2", + "pwm3", "pwm4", "pwm5"; + status = "disabled"; + }; + i2c0: i2c@11007000 { compatible = "mediatek,mt7623-i2c", "mediatek,mt6577-i2c"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 15/30] arm: dts: mt7623: add ethernet nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (13 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 14/30] arm: dts: mt7623: add pwm " sean.wang @ 2017-04-26 9:25 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 16/30] arm: dts: mt7623: add crypto engine " sean.wang ` (15 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:25 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add ethernet nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index cfafaea..c4be7a5 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -485,4 +485,24 @@ reg = <0 0x1b000000 0 0x1000>; #clock-cells = <1>; }; + + eth: ethernet@1b100000 { + compatible = "mediatek,mt2701-eth", "syscon"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_ESW>, + <ðsys CLK_ETHSYS_GP1>, + <ðsys CLK_ETHSYS_GP2>, + <&apmixedsys CLK_APMIXED_TRGPLL>; + clock-names = "ethif", "esw", "gp1", "gp2", "trgpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + mediatek,ethsys = <ðsys>; + mediatek,pctl = <&syscfg_pctl_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 16/30] arm: dts: mt7623: add crypto engine nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (14 preceding siblings ...) 2017-04-26 9:25 ` [PATCH v2 15/30] arm: dts: mt7623: add ethernet " sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 17/30] arm: dts: mt7623: add ir " sean.wang ` (14 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add crypto engine nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index c4be7a5..ad7c50a 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -505,4 +505,19 @@ #size-cells = <0>; status = "disabled"; }; + + crypto: crypto@1b240000 { + compatible = "mediatek,mt7623-crypto"; + reg = <0 0x1b240000 0 0x20000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <ðsys CLK_ETHSYS_CRYPTO>; + clock-names = "ethif","cryp"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + status = "disabled"; + }; }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 17/30] arm: dts: mt7623: add ir nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (15 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 16/30] arm: dts: mt7623: add crypto engine " sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 18/30] arm: dts: mt7623: add afe " sean.wang ` (13 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add ir nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index ad7c50a..76e0840 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -171,6 +171,15 @@ clock-names = "spi", "wrap"; }; + cir: cir@0x10013000 { + compatible = "mediatek,mt7623-cir"; + reg = <0 0x10013000 0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_IRRX>; + clock-names = "clk"; + status = "disabled"; + }; + sysirq: interrupt-controller@10200100 { compatible = "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 18/30] arm: dts: mt7623: add afe nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (16 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 17/30] arm: dts: mt7623: add ir " sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 19/30] arm: dts: mt7623: add rng " sean.wang ` (12 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add afe nodes to the mt7623.dtsi file. Which is the necessary node for I2S audio in/out. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 99 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 76e0840..a2b6238 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -380,6 +380,105 @@ status = "disabled"; }; + afe: audio-controller@11220000 { + compatible = "mediatek,mt7623-audio", + "mediatek,mt2701-audio"; + reg = <0 0x11220000 0 0x2000>, + <0 0x112a0000 0 0x20000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUDPLL_MUX_SEL>, + <&topckgen CLK_TOP_APLL_SEL>, + <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>, + <&topckgen CLK_TOP_HADDS2PLL_98M>, + <&topckgen CLK_TOP_HADDS2PLL_294M>, + <&topckgen CLK_TOP_AUDPLL>, + <&topckgen CLK_TOP_AUDPLL_D4>, + <&topckgen CLK_TOP_AUDPLL_D8>, + <&topckgen CLK_TOP_AUDPLL_D16>, + <&topckgen CLK_TOP_AUDPLL_D24>, + <&topckgen CLK_TOP_AUDINTBUS_SEL>, + <&clk26m>, + <&topckgen CLK_TOP_SYSPLL1_D4>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K5_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K6_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K5_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K6_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&topckgen CLK_TOP_AUD_I2S5_MCLK>, + <&topckgen CLK_TOP_AUD_I2S6_MCLK>, + <&topckgen CLK_TOP_ASM_M_SEL>, + <&topckgen CLK_TOP_ASM_H_SEL>, + <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_UNIVPLL2_D2>, + <&topckgen CLK_TOP_SYSPLL_D5>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_mux1_div", + "top_audio_mux2_div", + "top_audio_48k_timing", + "top_audio_44k_timing", + "top_audpll_mux_sel", + "top_apll_sel", + "top_aud1_pll_98M", + "top_aud2_pll_90M", + "top_hadds2_pll_98M", + "top_hadds2_pll_294M", + "top_audpll", + "top_audpll_d4", + "top_audpll_d8", + "top_audpll_d16", + "top_audpll_d24", + "top_audintbus_sel", + "clk_26m", + "top_syspll1_d4", + "top_aud_k1_src_sel", + "top_aud_k2_src_sel", + "top_aud_k3_src_sel", + "top_aud_k4_src_sel", + "top_aud_k5_src_sel", + "top_aud_k6_src_sel", + "top_aud_k1_src_div", + "top_aud_k2_src_div", + "top_aud_k3_src_div", + "top_aud_k4_src_div", + "top_aud_k5_src_div", + "top_aud_k6_src_div", + "top_aud_i2s1_mclk", + "top_aud_i2s2_mclk", + "top_aud_i2s3_mclk", + "top_aud_i2s4_mclk", + "top_aud_i2s5_mclk", + "top_aud_i2s6_mclk", + "top_asm_m_sel", + "top_asm_h_sel", + "top_univpll2_d4", + "top_univpll2_d2", + "top_syspll_d5"; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt7623-mmc", "mediatek,mt8135-mmc"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 19/30] arm: dts: mt7623: add rng nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (17 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 18/30] arm: dts: mt7623: add afe " sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 20/30] arm: dts: mt7623: add auxadc " sean.wang ` (11 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add rng nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index a2b6238..707f0e5 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -197,6 +197,13 @@ #clock-cells = <1>; }; + rng: rng@1020f000 { + compatible = "mediatek,mt7623-rng"; + reg = <0 0x1020f000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_TRNG>; + clock-names = "rng"; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 20/30] arm: dts: mt7623: add auxadc nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (18 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 19/30] arm: dts: mt7623: add rng " sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 21/30] arm: dts: mt7623: add efuse " sean.wang ` (10 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add auxadc nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 707f0e5..0f82e1a 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -215,6 +215,15 @@ <0 0x10216000 0 0x2000>; }; + auxadc: adc@11001000 { + compatible = "mediatek,mt7623-auxadc", + "mediatek,mt2701-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + }; + uart0: serial@11002000 { compatible = "mediatek,mt7623-uart", "mediatek,mt6577-uart"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 21/30] arm: dts: mt7623: add efuse nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (19 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 20/30] arm: dts: mt7623: add auxadc " sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 22/30] arm: dts: mt7623: add thermal " sean.wang ` (9 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add efuse nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 0f82e1a..2289232 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -189,6 +189,17 @@ reg = <0 0x10200100 0 0x1c>; }; + efuse: efuse@10206000 { + compatible = "mediatek,mt7623-efuse", + "mediatek,mt8173-efuse"; + reg = <0 0x10206000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + thermal_calibration_data: calib@424 { + reg = <0x424 0xc>; + }; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys", -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 22/30] arm: dts: mt7623: add thermal nodes to the mt7623.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (20 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 21/30] arm: dts: mt7623: add efuse " sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 23/30] arm: dts: mt7623: add Sean as one of authors for mt7623.dtsi files sean.wang ` (8 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add thermal nodes to the mt7623.dtsi file. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 2289232..d33d535 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -354,6 +354,22 @@ status = "disabled"; }; + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt7623-thermal", + "mediatek,mt2701-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT2701_PERI_THERM_SW_RST>; + reset-names = "therm"; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration_data>; + nvmem-cell-names = "calibration-data"; + }; + spi1: spi@11016000 { compatible = "mediatek,mt7623-spi", "mediatek,mt2701-spi"; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 23/30] arm: dts: mt7623: add Sean as one of authors for mt7623.dtsi files 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (21 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 22/30] arm: dts: mt7623: add thermal " sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 24/30] arm: dts: mt7623: add mt7623-mt6323.dtsi file sean.wang ` (7 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add Sean as one of the authors for the mt7623.dtsi Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index d33d535..d81158b2 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -1,6 +1,7 @@ /* - * Copyright (c) 2016 MediaTek Inc. + * Copyright (c) 2017 MediaTek Inc. * Author: John Crispin <john@phrozen.org> + * Sean Wang <sean.wang@mediatek.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 24/30] arm: dts: mt7623: add mt7623-mt6323.dtsi file 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (22 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 23/30] arm: dts: mt7623: add Sean as one of authors for mt7623.dtsi files sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 25/30] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi sean.wang ` (6 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> MediaTek produces various PMICs. Which one is used depends on the actual circuit design. Instead of adding the correct PMIC node to every dts file we instead add a new intermediate dtsi file which adds the PMIC node. Additionally we also add the phandles for the regulators to various nodes. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623-evb.dts | 2 +- arch/arm/boot/dts/mt7623-mt6323.dtsi | 269 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/mt7623.dtsi | 8 +- 3 files changed, 274 insertions(+), 5 deletions(-) create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts index b60b41c..a769149 100644 --- a/arch/arm/boot/dts/mt7623-evb.dts +++ b/arch/arm/boot/dts/mt7623-evb.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -#include "mt7623.dtsi" +#include "mt7623-mt6323.dtsi" / { model = "MediaTek MT7623 evaluation board"; diff --git a/arch/arm/boot/dts/mt7623-mt6323.dtsi b/arch/arm/boot/dts/mt7623-mt6323.dtsi new file mode 100644 index 0000000..93d3f71 --- /dev/null +++ b/arch/arm/boot/dts/mt7623-mt6323.dtsi @@ -0,0 +1,269 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: John Crispin <john@phrozen.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7623.dtsi" + +&cpu0 { + proc-supply = <&mt6323_vproc_reg>; +}; + +&cpu1 { + proc-supply = <&mt6323_vproc_reg>; +}; + +&cpu2 { + proc-supply = <&mt6323_vproc_reg>; +}; + +&cpu3 { + proc-supply = <&mt6323_vproc_reg>; +}; + +&pwrap { + pmic: mt6323 { + compatible = "mediatek,mt6323"; + interrupt-parent = <&pio>; + interrupts = <150 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + mt6323regulator: mt6323regulator{ + compatible = "mediatek,mt6323-regulator"; + + mt6323_vproc_reg: buck_vproc{ + regulator-name = "vproc"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vsys_reg: buck_vsys{ + regulator-name = "vsys"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2987500>; + regulator-ramp-delay = <25000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vpa_reg: buck_vpa{ + regulator-name = "vpa"; + regulator-min-microvolt = < 500000>; + regulator-max-microvolt = <3650000>; + }; + + mt6323_vtcxo_reg: ldo_vtcxo{ + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcn28_reg: ldo_vcn28{ + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_bt_reg: ldo_vcn33_bt{ + regulator-name = "vcn33_bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{ + regulator-name = "vcn33_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3600000>; + regulator-enable-ramp-delay = <185>; + }; + + mt6323_va_reg: ldo_va{ + regulator-name = "va"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcama_reg: ldo_vcama{ + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vio28_reg: ldo_vio28{ + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vusb_reg: ldo_vusb{ + regulator-name = "vusb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + regulator-boot-on; + }; + + mt6323_vmc_reg: ldo_vmc{ + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vmch_reg: ldo_vmch{ + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vemc3v3_reg: ldo_vemc3v3{ + regulator-name = "vemc3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + regulator-boot-on; + }; + + mt6323_vgp1_reg: ldo_vgp1{ + regulator-name = "vgp1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp2_reg: ldo_vgp2{ + regulator-name = "vgp2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vgp3_reg: ldo_vgp3{ + regulator-name = "vgp3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcn18_reg: ldo_vcn18{ + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim1_reg: ldo_vsim1{ + regulator-name = "vsim1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vsim2_reg: ldo_vsim2{ + regulator-name = "vsim2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vrtc_reg: ldo_vrtc{ + regulator-name = "vrtc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamaf_reg: ldo_vcamaf{ + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vibr_reg: ldo_vibr{ + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <36>; + }; + + mt6323_vrf18_reg: ldo_vrf18{ + regulator-name = "vrf18"; + regulator-min-microvolt = <1825000>; + regulator-max-microvolt = <1825000>; + regulator-enable-ramp-delay = <187>; + }; + + mt6323_vm_reg: ldo_vm{ + regulator-name = "vm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vio18_reg: ldo_vio18{ + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + regulator-always-on; + regulator-boot-on; + }; + + mt6323_vcamd_reg: ldo_vcamd{ + regulator-name = "vcamd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + + mt6323_vcamio_reg: ldo_vcamio{ + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <216>; + }; + }; + }; +}; + +&mmc0 { + vmmc-supply = <&mt6323_vemc3v3_reg>; + vqmmc-supply = <&mt6323_vio18_reg>; +}; + +&mmc1 { + vmmc-supply = <&mt6323_vmch_reg>; + vqmmc-supply = <&mt6323_vmc_reg>; +}; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index d81158b2..e9e0974 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -32,22 +32,22 @@ #size-cells = <0>; enable-method = "mediatek,mt6589-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x1>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x2>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x3>; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 25/30] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (23 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 24/30] arm: dts: mt7623: add mt7623-mt6323.dtsi file sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-28 20:30 ` Rob Herring 2017-04-26 9:26 ` [PATCH v2 26/30] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes sean.wang ` (5 subsequent siblings) 30 siblings, 1 reply; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> There are 2 versions of the SoC. MT7623N is almost identical to MT7623A but has some additional multimedia features. The reference boards are available as NAND or MMC and might have a different ethernet setup. In order to reduce the duplication of devicetree code we add an intermediate dtsi file for these reference boards. Additionally Mediatek pointed out, that the EVB is yet another board and the board in question is infact the RFB. Take this into account while renaming the files. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- Documentation/devicetree/bindings/arm/mediatek.txt | 6 ++-- arch/arm/boot/dts/Makefile | 2 +- arch/arm/boot/dts/mt7623-evb.dts | 33 ---------------------- arch/arm/boot/dts/mt7623n-rfb-nand.dts | 21 ++++++++++++++ arch/arm/boot/dts/mt7623n-rfb.dtsi | 29 +++++++++++++++++++ arch/arm/mach-mediatek/mediatek.c | 4 +-- arch/arm/mach-mediatek/platsmp.c | 2 +- 7 files changed, 57 insertions(+), 40 deletions(-) delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index c860b24..7f7c804 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -12,7 +12,7 @@ compatible: Must contain one of "mediatek,mt6592" "mediatek,mt6755" "mediatek,mt6795" - "mediatek,mt7623" + "mediatek,mt7623n" "mediatek,mt8127" "mediatek,mt8135" "mediatek,mt8173" @@ -38,9 +38,9 @@ Supported boards: - Evaluation board for MT6795(Helio X10): Required root node properties: - compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; -- Evaluation board for MT7623: +- Reference board for MT7623N with NAND: Required root node properties: - - compatible = "mediatek,mt7623-evb", "mediatek,mt7623"; + - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623n"; - MTK mt8127 tablet moose EVB: Required root node properties: - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0118084..5249d24 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1003,7 +1003,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6580-evbp1.dtb \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ - mt7623-evb.dtb \ + mt7623n-rfb-nand.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts deleted file mode 100644 index a769149..0000000 --- a/arch/arm/boot/dts/mt7623-evb.dts +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (c) 2016 MediaTek Inc. - * Author: John Crispin <john@phrozen.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/dts-v1/; -#include "mt7623-mt6323.dtsi" - -/ { - model = "MediaTek MT7623 evaluation board"; - compatible = "mediatek,mt7623-evb", "mediatek,mt7623"; - - chosen { - stdout-path = &uart2; - }; - - memory { - reg = <0 0x80000000 0 0x40000000>; - }; -}; - -&uart2 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts new file mode 100644 index 0000000..07b3953 --- /dev/null +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts @@ -0,0 +1,21 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt7623n-rfb.dtsi" + +/ { + model = "MediaTek MT7623N NAND reference board"; + compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623n"; +}; diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi new file mode 100644 index 0000000..c526116 --- /dev/null +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi @@ -0,0 +1,29 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7623-mt6323.dtsi" + +/ { + chosen { + stdout-path = &uart2; + }; + + memory@80000000 { + reg = <0 0x80000000 0 0x40000000>; + }; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index a6e3c98..602211d 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -29,7 +29,7 @@ static void __init mediatek_timer_init(void) void __iomem *gpt_base; if (of_machine_is_compatible("mediatek,mt6589") || - of_machine_is_compatible("mediatek,mt7623") || + of_machine_is_compatible("mediatek,mt7623n") || of_machine_is_compatible("mediatek,mt8135") || of_machine_is_compatible("mediatek,mt8127")) { /* turn on GPT6 which ungates arch timer clocks */ @@ -48,7 +48,7 @@ static void __init mediatek_timer_init(void) "mediatek,mt2701", "mediatek,mt6589", "mediatek,mt6592", - "mediatek,mt7623", + "mediatek,mt7623n", "mediatek,mt8127", "mediatek,mt8135", NULL, diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c index 726eb69..2dfa1cd 100644 --- a/arch/arm/mach-mediatek/platsmp.c +++ b/arch/arm/mach-mediatek/platsmp.c @@ -58,7 +58,7 @@ struct mtk_smp_boot_info { static const struct of_device_id mtk_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot }, - { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot }, + { .compatible = "mediatek,mt7623n", .data = &mtk_mt7623_boot }, }; static void __iomem *mtk_smp_base; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH v2 25/30] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi 2017-04-26 9:26 ` [PATCH v2 25/30] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi sean.wang @ 2017-04-28 20:30 ` Rob Herring 2017-05-01 7:06 ` Sean Wang 0 siblings, 1 reply; 46+ messages in thread From: Rob Herring @ 2017-04-28 20:30 UTC (permalink / raw) To: sean.wang Cc: matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek, linux-arm-kernel, linux-gpio, linux-kernel On Wed, Apr 26, 2017 at 05:26:09PM +0800, sean.wang@mediatek.com wrote: > From: Sean Wang <sean.wang@mediatek.com> > > There are 2 versions of the SoC. MT7623N is almost identical to MT7623A > but has some additional multimedia features. The reference boards are > available as NAND or MMC and might have a different ethernet setup. In > order to reduce the duplication of devicetree code we add an intermediate > dtsi file for these reference boards. Additionally Mediatek pointed out, > that the EVB is yet another board and the board in question is infact the > RFB. Take this into account while renaming the files. You are breaking compatibility with existing DTs. Just document which flavor you want "mediatek,mt7623" to refer to and add the new one. Or just add 2 new strings but keep the old one. > > Signed-off-by: John Crispin <john@phrozen.org> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > > --- > Documentation/devicetree/bindings/arm/mediatek.txt | 6 ++-- > arch/arm/boot/dts/Makefile | 2 +- > arch/arm/boot/dts/mt7623-evb.dts | 33 ---------------------- > arch/arm/boot/dts/mt7623n-rfb-nand.dts | 21 ++++++++++++++ > arch/arm/boot/dts/mt7623n-rfb.dtsi | 29 +++++++++++++++++++ > arch/arm/mach-mediatek/mediatek.c | 4 +-- > arch/arm/mach-mediatek/platsmp.c | 2 +- > 7 files changed, 57 insertions(+), 40 deletions(-) > delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts > create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts > create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi > > diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt > index c860b24..7f7c804 100644 > --- a/Documentation/devicetree/bindings/arm/mediatek.txt > +++ b/Documentation/devicetree/bindings/arm/mediatek.txt > @@ -12,7 +12,7 @@ compatible: Must contain one of > "mediatek,mt6592" > "mediatek,mt6755" > "mediatek,mt6795" > - "mediatek,mt7623" > + "mediatek,mt7623n" > "mediatek,mt8127" > "mediatek,mt8135" > "mediatek,mt8173" ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 25/30] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi 2017-04-28 20:30 ` Rob Herring @ 2017-05-01 7:06 ` Sean Wang 0 siblings, 0 replies; 46+ messages in thread From: Sean Wang @ 2017-05-01 7:06 UTC (permalink / raw) To: Rob Herring Cc: matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek, linux-arm-kernel, linux-gpio, linux-kernel On Fri, 2017-04-28 at 15:30 -0500, Rob Herring wrote: > On Wed, Apr 26, 2017 at 05:26:09PM +0800, sean.wang@mediatek.com wrote: > > From: Sean Wang <sean.wang@mediatek.com> > > > > There are 2 versions of the SoC. MT7623N is almost identical to MT7623A > > but has some additional multimedia features. The reference boards are > > available as NAND or MMC and might have a different ethernet setup. In > > order to reduce the duplication of devicetree code we add an intermediate > > dtsi file for these reference boards. Additionally Mediatek pointed out, > > that the EVB is yet another board and the board in question is infact the > > RFB. Take this into account while renaming the files. > > You are breaking compatibility with existing DTs. Just document which > flavor you want "mediatek,mt7623" to refer to and add the new one. Or > just add 2 new strings but keep the old one. > Hi Rob, really appreciate your patient guidance. I prefer to using the way one you suggest: the old one is kept and refers to mt7623n SoC and new one will be added for mt7623a Soc. Sean > > > > Signed-off-by: John Crispin <john@phrozen.org> > > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > > > > --- > > Documentation/devicetree/bindings/arm/mediatek.txt | 6 ++-- > > arch/arm/boot/dts/Makefile | 2 +- > > arch/arm/boot/dts/mt7623-evb.dts | 33 ---------------------- > > arch/arm/boot/dts/mt7623n-rfb-nand.dts | 21 ++++++++++++++ > > arch/arm/boot/dts/mt7623n-rfb.dtsi | 29 +++++++++++++++++++ > > arch/arm/mach-mediatek/mediatek.c | 4 +-- > > arch/arm/mach-mediatek/platsmp.c | 2 +- > > 7 files changed, 57 insertions(+), 40 deletions(-) > > delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts > > create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts > > create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi > > > > diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt > > index c860b24..7f7c804 100644 > > --- a/Documentation/devicetree/bindings/arm/mediatek.txt > > +++ b/Documentation/devicetree/bindings/arm/mediatek.txt > > @@ -12,7 +12,7 @@ compatible: Must contain one of > > "mediatek,mt6592" > > "mediatek,mt6755" > > "mediatek,mt6795" > > - "mediatek,mt7623" > > + "mediatek,mt7623n" > > "mediatek,mt8127" > > "mediatek,mt8135" > > "mediatek,mt8173" ^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v2 26/30] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (24 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 25/30] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 27/30] arm: dts: mt7623: enable the usb device on the mt7623n rfb sean.wang ` (4 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> This patch does a cleanup of the uart nodes in the dts file of the RFB. It adds aliases, enables 2 more uarts and explicitly sets the uart mode of the console. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623n-rfb.dtsi | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi index c526116..4963e6a 100644 --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi @@ -16,12 +16,26 @@ / { chosen { - stdout-path = &uart2; + stdout-path = "serial2:115200n8"; }; memory@80000000 { reg = <0 0x80000000 0 0x40000000>; }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; }; &uart2 { -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 27/30] arm: dts: mt7623: enable the usb device on the mt7623n rfb 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (25 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 26/30] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 28/30] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb sean.wang ` (3 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> All versions of the mt7623n RFB have an USB port so enable the device. There is a gpio that gets used to power up the port supply. Add support for this gpio using the fixed-regulator driver. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623n-rfb.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi index 4963e6a..2964b4c 100644 --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi @@ -28,6 +28,15 @@ serial1 = &uart1; serial2 = &uart2; }; + + usb_p1_vbus: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &uart0 { @@ -41,3 +50,12 @@ &uart2 { status = "okay"; }; + +&usb1 { + vbus-supply = <&usb_p1_vbus>; + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 28/30] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (26 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 27/30] arm: dts: mt7623: enable the usb device on the mt7623n rfb sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-26 9:26 ` [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi sean.wang ` (2 subsequent siblings) 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: John Crispin <john@phrozen.org> Enable the nand device and setup pinmux on the mt7632m rfb with nand support. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm/boot/dts/mt7623n-rfb-nand.dts | 88 ++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts index 07b3953..06a76fa 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts @@ -19,3 +19,91 @@ model = "MediaTek MT7623N NAND reference board"; compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623n"; }; + +&pio { + nand_pins_default: nanddefault { + pins_dat { + pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>, + <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>, + <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>, + <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>, + <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>, + <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>, + <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>, + <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>, + <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up; + }; + + pins_we { + pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_ale { + pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; +}; + +&nandc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_default>; + nand@0 { + reg = <0>; + spare_per_sector = <64>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <12>; + nand-ecc-step-size = <1024>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "preloader"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + + partition@C0000 { + label = "uboot-env"; + reg = <0xC0000 0x40000>; + }; + + partition@140000 { + label = "bootimg"; + reg = <0x140000 0x2000000>; + }; + + partition@2140000 { + label = "recovery"; + reg = <0x2140000 0x2000000>; + }; + + partition@4140000 { + label = "rootfs"; + reg = <0x4140000 0x1000000>; + }; + + partition@5140000 { + label = "usrdata"; + reg = <0x5140000 0x1000000>; + }; + }; + }; +}; + +&bch { + status = "okay"; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (27 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 28/30] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-04-28 20:37 ` Rob Herring 2017-04-26 9:26 ` [PATCH v2 30/30] arm: dts: mt7623: add dts file for Bananapi R2 (BPI-R2) board sean.wang 2017-05-10 9:58 ` [PATCH v2 00/30] arm: dts: extend mt7623 support Matthias Brugger 30 siblings, 1 reply; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Banana Pi team in Sinovoip Co., Limited which are dedicated to design and manufacture open hardware product. Website: http://www.banana-pi.org/ Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ec0bfb9..8ca0f3c 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -44,6 +44,7 @@ avia avia semiconductor avic Shanghai AVIC Optoelectronics Co., Ltd. axentia Axentia Technologies AB axis Axis Communications AB +bananapi Banana Pi SINOVOP CO., LIMITED boe BOE Technology Group Co., Ltd. bosch Bosch Sensortec GmbH boundary Boundary Devices Inc. -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi 2017-04-26 9:26 ` [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi sean.wang @ 2017-04-28 20:37 ` Rob Herring 2017-05-01 6:58 ` Sean Wang 0 siblings, 1 reply; 46+ messages in thread From: Rob Herring @ 2017-04-28 20:37 UTC (permalink / raw) To: sean.wang Cc: matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek, linux-arm-kernel, linux-gpio, linux-kernel On Wed, Apr 26, 2017 at 05:26:13PM +0800, sean.wang@mediatek.com wrote: > From: Sean Wang <sean.wang@mediatek.com> > > Banana Pi team in Sinovoip Co., Limited which are dedicated to > design and manufacture open hardware product. > > Website: http://www.banana-pi.org/ > > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index ec0bfb9..8ca0f3c 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -44,6 +44,7 @@ avia avia semiconductor > avic Shanghai AVIC Optoelectronics Co., Ltd. > axentia Axentia Technologies AB > axis Axis Communications AB > +bananapi Banana Pi SINOVOP CO., LIMITED s/SINOVOP/SINOVOIP/ > boe BOE Technology Group Co., Ltd. > bosch Bosch Sensortec GmbH > boundary Boundary Devices Inc. > -- > 1.9.1 > ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi 2017-04-28 20:37 ` Rob Herring @ 2017-05-01 6:58 ` Sean Wang 2017-05-02 13:52 ` Rob Herring 2017-05-09 8:03 ` Chen-Yu Tsai 0 siblings, 2 replies; 46+ messages in thread From: Sean Wang @ 2017-05-01 6:58 UTC (permalink / raw) To: Rob Herring Cc: matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek, linux-arm-kernel, linux-gpio, linux-kernel On Fri, 2017-04-28 at 15:37 -0500, Rob Herring wrote: > On Wed, Apr 26, 2017 at 05:26:13PM +0800, sean.wang@mediatek.com wrote: > > From: Sean Wang <sean.wang@mediatek.com> > > > > Banana Pi team in Sinovoip Co., Limited which are dedicated to > > design and manufacture open hardware product. > > > > Website: http://www.banana-pi.org/ > > > > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > > --- > > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > > index ec0bfb9..8ca0f3c 100644 > > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > > @@ -44,6 +44,7 @@ avia avia semiconductor > > avic Shanghai AVIC Optoelectronics Co., Ltd. > > axentia Axentia Technologies AB > > axis Axis Communications AB > > +bananapi Banana Pi SINOVOP CO., LIMITED > > s/SINOVOP/SINOVOIP/ Hi Rob, thanks for your careful reviewing , i will correct it in the next version. BTW, Could those related dts changes go through your tree if everything looks good? Because I find Matthias have been inactive for a while and the latest branch in his tree seems still staying on 4.10. Sean > > > boe BOE Technology Group Co., Ltd. > > bosch Bosch Sensortec GmbH > > boundary Boundary Devices Inc. > > -- > > 1.9.1 > > ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi 2017-05-01 6:58 ` Sean Wang @ 2017-05-02 13:52 ` Rob Herring 2017-05-08 9:53 ` Sean Wang 2017-05-09 8:03 ` Chen-Yu Tsai 1 sibling, 1 reply; 46+ messages in thread From: Rob Herring @ 2017-05-02 13:52 UTC (permalink / raw) To: Sean Wang, arm Cc: Matthias Brugger, John Crispin, Mark Rutland, Russell King, Linus Walleij, devicetree, linux-mediatek, linux-arm-kernel, linux-gpio, linux-kernel +arm-soc On Mon, May 1, 2017 at 1:58 AM, Sean Wang <sean.wang@mediatek.com> wrote: > On Fri, 2017-04-28 at 15:37 -0500, Rob Herring wrote: >> On Wed, Apr 26, 2017 at 05:26:13PM +0800, sean.wang@mediatek.com wrote: >> > From: Sean Wang <sean.wang@mediatek.com> >> > >> > Banana Pi team in Sinovoip Co., Limited which are dedicated to >> > design and manufacture open hardware product. >> > >> > Website: http://www.banana-pi.org/ >> > >> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> >> > --- >> > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >> > 1 file changed, 1 insertion(+) >> > >> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt >> > index ec0bfb9..8ca0f3c 100644 >> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt >> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt >> > @@ -44,6 +44,7 @@ avia avia semiconductor >> > avic Shanghai AVIC Optoelectronics Co., Ltd. >> > axentia Axentia Technologies AB >> > axis Axis Communications AB >> > +bananapi Banana Pi SINOVOP CO., LIMITED >> >> s/SINOVOP/SINOVOIP/ > > Hi Rob, > > thanks for your careful reviewing , i will correct it in the next > version. > > BTW, Could those related dts changes go through your tree if everything > looks good? Because I find Matthias have been inactive for a while and > the latest branch in his tree seems still staying on 4.10. Happy to take binding doc changes, but I don't take dts changes because those go thru arm-soc. If the platform maintainer is not responsive, then we should replace or add maintainers. Rob ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi 2017-05-02 13:52 ` Rob Herring @ 2017-05-08 9:53 ` Sean Wang 2017-05-08 11:36 ` Arnd Bergmann 0 siblings, 1 reply; 46+ messages in thread From: Sean Wang @ 2017-05-08 9:53 UTC (permalink / raw) To: arnd, olof, RobHerring Cc: arm, Matthias Brugger, John Crispin, Mark Rutland, Russell King, Linus Walleij, devicetree, linux-mediatek, linux-arm-kernel, linux-gpio, linux-kernel Hi Rob, thanks for helping me looping in the right group Hi Arnd and Olof I found Matthias is inactive for a while (his branch in his tree seemed to stop at 4.10 since the end of February) maybe he was busy at other things. Is there a good way to break the stuck situation and keeping linux-mediatek moving on? I have the willing to fork his tree, prepare dt-for-4.12 and send pull-requests to you. But I am worried in that way violating the reviewing process if Matthias no reads it. Sean On Tue, 2017-05-02 at 08:52 -0500, Rob Herring wrote: > +arm-soc > > On Mon, May 1, 2017 at 1:58 AM, Sean Wang <sean.wang@mediatek.com> wrote: > > On Fri, 2017-04-28 at 15:37 -0500, Rob Herring wrote: > >> On Wed, Apr 26, 2017 at 05:26:13PM +0800, sean.wang@mediatek.com wrote: > >> > From: Sean Wang <sean.wang@mediatek.com> > >> > > >> > Banana Pi team in Sinovoip Co., Limited which are dedicated to > >> > design and manufacture open hardware product. > >> > > >> > Website: http://www.banana-pi.org/ > >> > > >> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > >> > --- > >> > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > >> > 1 file changed, 1 insertion(+) > >> > > >> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > >> > index ec0bfb9..8ca0f3c 100644 > >> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > >> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > >> > @@ -44,6 +44,7 @@ avia avia semiconductor > >> > avic Shanghai AVIC Optoelectronics Co., Ltd. > >> > axentia Axentia Technologies AB > >> > axis Axis Communications AB > >> > +bananapi Banana Pi SINOVOP CO., LIMITED > >> > >> s/SINOVOP/SINOVOIP/ > > > > Hi Rob, > > > > thanks for your careful reviewing , i will correct it in the next > > version. > > > > BTW, Could those related dts changes go through your tree if everything > > looks good? Because I find Matthias have been inactive for a while and > > the latest branch in his tree seems still staying on 4.10. > > Happy to take binding doc changes, but I don't take dts changes > because those go thru arm-soc. If the platform maintainer is not > responsive, then we should replace or add maintainers. > > Rob ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi 2017-05-08 9:53 ` Sean Wang @ 2017-05-08 11:36 ` Arnd Bergmann 2017-05-09 7:49 ` Matthias Brugger 0 siblings, 1 reply; 46+ messages in thread From: Arnd Bergmann @ 2017-05-08 11:36 UTC (permalink / raw) To: Sean Wang Cc: Olof Johansson, RobHerring, arm, Matthias Brugger, John Crispin, Mark Rutland, Russell King, Linus Walleij, devicetree, linux-mediatek, linux-arm-kernel, linux-gpio, linux-kernel, Matthias Brugger On Mon, May 8, 2017 at 11:53 AM, Sean Wang <sean.wang@mediatek.com> wrote: > Hi Rob, > > thanks for helping me looping in the right group > > > Hi Arnd and Olof > > I found Matthias is inactive for a while (his branch in his tree seemed > to stop at 4.10 since the end of February) maybe he was busy at other > things. Is there a good way to break the stuck situation and keeping > linux-mediatek moving on? > > I have the willing to fork his tree, prepare dt-for-4.12 and send > pull-requests to you. Hi Sean, Thanks for offering to help out. I've added Matthias' other email address to Cc here, let's see if he notices the discussion now. Ideally any important platform should have multiple maintainers so there is always a backup person when the primary contact is unavailable for any reason. I'm not sure how much we can still do for 4.12, if you can prepare a branch now we can definitely have a look and see what we can realistically take for a late merge, but as we are in the second half of the merge window already, we would normally put new features into a 4.13 branch and only take bug fixes for 4.12. If there are some entirely new files for additional boards, or only small changes to the existing files, we might make an exception this time. > But I am worried in that way violating the reviewing process if > Matthias no reads it. Don't worry about that at the moment, if Matthias cannot be reached at all, we have to find an alternative way to get patches in. Arnd > On Tue, 2017-05-02 at 08:52 -0500, Rob Herring wrote: >> +arm-soc >> >> On Mon, May 1, 2017 at 1:58 AM, Sean Wang <sean.wang@mediatek.com> wrote: >> > On Fri, 2017-04-28 at 15:37 -0500, Rob Herring wrote: >> >> On Wed, Apr 26, 2017 at 05:26:13PM +0800, sean.wang@mediatek.com wrote: >> >> > From: Sean Wang <sean.wang@mediatek.com> >> >> > >> >> > Banana Pi team in Sinovoip Co., Limited which are dedicated to >> >> > design and manufacture open hardware product. >> >> > >> >> > Website: http://www.banana-pi.org/ >> >> > >> >> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> >> >> > --- >> >> > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >> >> > 1 file changed, 1 insertion(+) >> >> > >> >> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt >> >> > index ec0bfb9..8ca0f3c 100644 >> >> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt >> >> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt >> >> > @@ -44,6 +44,7 @@ avia avia semiconductor >> >> > avic Shanghai AVIC Optoelectronics Co., Ltd. >> >> > axentia Axentia Technologies AB >> >> > axis Axis Communications AB >> >> > +bananapi Banana Pi SINOVOP CO., LIMITED >> >> >> >> s/SINOVOP/SINOVOIP/ >> > >> > Hi Rob, >> > >> > thanks for your careful reviewing , i will correct it in the next >> > version. >> > >> > BTW, Could those related dts changes go through your tree if everything >> > looks good? Because I find Matthias have been inactive for a while and >> > the latest branch in his tree seems still staying on 4.10. >> >> Happy to take binding doc changes, but I don't take dts changes >> because those go thru arm-soc. If the platform maintainer is not >> responsive, then we should replace or add maintainers. >> >> Rob ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi 2017-05-08 11:36 ` Arnd Bergmann @ 2017-05-09 7:49 ` Matthias Brugger 0 siblings, 0 replies; 46+ messages in thread From: Matthias Brugger @ 2017-05-09 7:49 UTC (permalink / raw) To: Arnd Bergmann Cc: Sean Wang, Olof Johansson, RobHerring, arm, John Crispin, Mark Rutland, Russell King, Linus Walleij, devicetree, moderated list:ARM/Mediatek SoC..., linux-arm-kernel, linux-gpio, linux-kernel, Matthias Brugger, Eddie Huang (黃智傑) Hi Sean, Hi Arnd, +Eddie who pinged me about this in a private mail. 2017-05-08 13:36 GMT+02:00 Arnd Bergmann <arnd@arndb.de>: > On Mon, May 8, 2017 at 11:53 AM, Sean Wang <sean.wang@mediatek.com> wrote: >> Hi Rob, >> >> thanks for helping me looping in the right group >> >> >> Hi Arnd and Olof >> >> I found Matthias is inactive for a while (his branch in his tree seemed >> to stop at 4.10 since the end of February) maybe he was busy at other >> things. Is there a good way to break the stuck situation and keeping >> linux-mediatek moving on? >> >> I have the willing to fork his tree, prepare dt-for-4.12 and send >> pull-requests to you. > > Hi Sean, > > Thanks for offering to help out. I've added Matthias' other email address > to Cc here, let's see if he notices the discussion now. Ideally any > important platform should have multiple maintainers so there is > always a backup person when the primary contact is unavailable > for any reason. > > I'm not sure how much we can still do for 4.12, if you can prepare a > branch now we can definitely have a look and see what we can > realistically take for a late merge, but as we are in the second half > of the merge window already, we would normally put new features > into a 4.13 branch and only take bug fixes for 4.12. If there are > some entirely new files for additional boards, or only small changes > to the existing files, we might make an exception this time. > >> But I am worried in that way violating the reviewing process if >> Matthias no reads it. > > Don't worry about that at the moment, if Matthias cannot be reached > at all, we have to find an alternative way to get patches in. > I'm very sorry for the situation. Actually I was struggling lately to do my maintainer work in an acceptable manner. And this merge window I definitely wasn't able to follow the discussions. I hope that this will change in the very near future. I would propose to send a merge request or a summary with the relevant patches now and I will look at it today and forward them to Arnd. For the future we should start to think about who could step-in as co-maintainer to avoid situation like this. Once again, sorry for the inconvenience, Matthias > Arnd > >> On Tue, 2017-05-02 at 08:52 -0500, Rob Herring wrote: >>> +arm-soc >>> >>> On Mon, May 1, 2017 at 1:58 AM, Sean Wang <sean.wang@mediatek.com> wrote: >>> > On Fri, 2017-04-28 at 15:37 -0500, Rob Herring wrote: >>> >> On Wed, Apr 26, 2017 at 05:26:13PM +0800, sean.wang@mediatek.com wrote: >>> >> > From: Sean Wang <sean.wang@mediatek.com> >>> >> > >>> >> > Banana Pi team in Sinovoip Co., Limited which are dedicated to >>> >> > design and manufacture open hardware product. >>> >> > >>> >> > Website: http://www.banana-pi.org/ >>> >> > >>> >> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> >>> >> > --- >>> >> > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >>> >> > 1 file changed, 1 insertion(+) >>> >> > >>> >> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt >>> >> > index ec0bfb9..8ca0f3c 100644 >>> >> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt >>> >> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt >>> >> > @@ -44,6 +44,7 @@ avia avia semiconductor >>> >> > avic Shanghai AVIC Optoelectronics Co., Ltd. >>> >> > axentia Axentia Technologies AB >>> >> > axis Axis Communications AB >>> >> > +bananapi Banana Pi SINOVOP CO., LIMITED >>> >> >>> >> s/SINOVOP/SINOVOIP/ >>> > >>> > Hi Rob, >>> > >>> > thanks for your careful reviewing , i will correct it in the next >>> > version. >>> > >>> > BTW, Could those related dts changes go through your tree if everything >>> > looks good? Because I find Matthias have been inactive for a while and >>> > the latest branch in his tree seems still staying on 4.10. >>> >>> Happy to take binding doc changes, but I don't take dts changes >>> because those go thru arm-soc. If the platform maintainer is not >>> responsive, then we should replace or add maintainers. >>> >>> Rob -- motzblog.wordpress.com ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi 2017-05-01 6:58 ` Sean Wang 2017-05-02 13:52 ` Rob Herring @ 2017-05-09 8:03 ` Chen-Yu Tsai 2017-05-09 9:40 ` Sean Wang 1 sibling, 1 reply; 46+ messages in thread From: Chen-Yu Tsai @ 2017-05-09 8:03 UTC (permalink / raw) To: Sean Wang Cc: Rob Herring, Mark Rutland, devicetree, Linus Walleij, Russell King, linux-kernel, linux-gpio, moderated list:ARM/Mediatek SoC..., John Crispin, Matthias Brugger, linux-arm-kernel Hi, On Mon, May 1, 2017 at 2:58 PM, Sean Wang <sean.wang@mediatek.com> wrote: > On Fri, 2017-04-28 at 15:37 -0500, Rob Herring wrote: >> On Wed, Apr 26, 2017 at 05:26:13PM +0800, sean.wang@mediatek.com wrote: >> > From: Sean Wang <sean.wang@mediatek.com> >> > >> > Banana Pi team in Sinovoip Co., Limited which are dedicated to >> > design and manufacture open hardware product. >> > >> > Website: http://www.banana-pi.org/ >> > >> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> >> > --- >> > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + >> > 1 file changed, 1 insertion(+) >> > >> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt >> > index ec0bfb9..8ca0f3c 100644 >> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt >> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt >> > @@ -44,6 +44,7 @@ avia avia semiconductor >> > avic Shanghai AVIC Optoelectronics Co., Ltd. >> > axentia Axentia Technologies AB >> > axis Axis Communications AB >> > +bananapi Banana Pi SINOVOP CO., LIMITED >> >> s/SINOVOP/SINOVOIP/ > > Hi Rob, > > thanks for your careful reviewing , i will correct it in the next > version. > > BTW, Could those related dts changes go through your tree if everything > looks good? Because I find Matthias have been inactive for a while and > the latest branch in his tree seems still staying on 4.10. Chiming in from the linux-sunxi side. We've been using the "lemaker" prefix for the original Banana Pi, and the "sinovoip" prefix for all the later ones by SINOVOIP. Both prefixes are still undocumented. Given the complicated history behind the Banana Pi brand, do we know what prefix they prefer, and what company should be tied to it? Thanks ChenYu > > Sean > >> >> > boe BOE Technology Group Co., Ltd. >> > bosch Bosch Sensortec GmbH >> > boundary Boundary Devices Inc. >> > -- >> > 1.9.1 >> > > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi 2017-05-09 8:03 ` Chen-Yu Tsai @ 2017-05-09 9:40 ` Sean Wang 0 siblings, 0 replies; 46+ messages in thread From: Sean Wang @ 2017-05-09 9:40 UTC (permalink / raw) To: Chen-Yu Tsai Cc: Rob Herring, Mark Rutland, devicetree, Linus Walleij, Russell King, linux-kernel, linux-gpio, moderated list:ARM/Mediatek SoC..., John Crispin, Matthias Brugger, linux-arm-kernel On Tue, 2017-05-09 at 16:03 +0800, Chen-Yu Tsai wrote: > Hi, > > On Mon, May 1, 2017 at 2:58 PM, Sean Wang <sean.wang@mediatek.com> wrote: > > On Fri, 2017-04-28 at 15:37 -0500, Rob Herring wrote: > >> On Wed, Apr 26, 2017 at 05:26:13PM +0800, sean.wang@mediatek.com wrote: > >> > From: Sean Wang <sean.wang@mediatek.com> > >> > > >> > Banana Pi team in Sinovoip Co., Limited which are dedicated to > >> > design and manufacture open hardware product. > >> > > >> > Website: http://www.banana-pi.org/ > >> > > >> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > >> > --- > >> > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > >> > 1 file changed, 1 insertion(+) > >> > > >> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > >> > index ec0bfb9..8ca0f3c 100644 > >> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > >> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > >> > @@ -44,6 +44,7 @@ avia avia semiconductor > >> > avic Shanghai AVIC Optoelectronics Co., Ltd. > >> > axentia Axentia Technologies AB > >> > axis Axis Communications AB > >> > +bananapi Banana Pi SINOVOP CO., LIMITED > >> > >> s/SINOVOP/SINOVOIP/ > > > > Hi Rob, > > > > thanks for your careful reviewing , i will correct it in the next > > version. > > > > BTW, Could those related dts changes go through your tree if everything > > looks good? Because I find Matthias have been inactive for a while and > > the latest branch in his tree seems still staying on 4.10. > > Chiming in from the linux-sunxi side. > > We've been using the "lemaker" prefix for the original Banana Pi, and > the "sinovoip" prefix for all the later ones by SINOVOIP. Both prefixes > are still undocumented. > > Given the complicated history behind the Banana Pi brand, do we know > what prefix they prefer, and what company should be tied to it? > > Thanks > ChenYu I knew there are some litigation issues between them Finally, Bananapi brand is owned by BIPAI KEJI and registered has been registered in more than 20 countries. So Lemaker can no longer use bananapi brand. I will update prefix naming with bananpi, BIPAI KEJI LIMITED for real bananapi boards that is confirmed by BIPAI KEJI > > > > Sean > > > >> > >> > boe BOE Technology Group Co., Ltd. > >> > bosch Bosch Sensortec GmbH > >> > boundary Boundary Devices Inc. > >> > -- > >> > 1.9.1 > >> > > > > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v2 30/30] arm: dts: mt7623: add dts file for Bananapi R2 (BPI-R2) board 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (28 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi sean.wang @ 2017-04-26 9:26 ` sean.wang 2017-05-10 9:58 ` [PATCH v2 00/30] arm: dts: extend mt7623 support Matthias Brugger 30 siblings, 0 replies; 46+ messages in thread From: sean.wang @ 2017-04-26 9:26 UTC (permalink / raw) To: robh+dt, matthias.bgg, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> Add support for the Bananapi R2 (BPI-R2) development board from Sinovoip. Detailed hardware information for BPI-R2 which could be found on http://www.banana-pi.org/r2.html The patch currently only adds Mediatek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART, SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing hardware and peripherals, they would be added and integrated continuously. Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- Documentation/devicetree/bindings/arm/mediatek.txt | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 478 +++++++++++++++++++++ 3 files changed, 481 insertions(+) create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index 7f7c804..234c1dc 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -41,6 +41,8 @@ Supported boards: - Reference board for MT7623N with NAND: Required root node properties: - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623n"; +- Bananapi BPI-R2 board: + - compatible = "bananapi,bpi-r2", "mediatek,mt7623n"; - MTK mt8127 tablet moose EVB: Required root node properties: - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5249d24..2831069 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1004,6 +1004,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ mt7623n-rfb-nand.dtb \ + mt7623n-bananapi-bpi-r2.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts new file mode 100644 index 0000000..a06bf0c --- /dev/null +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -0,0 +1,478 @@ +/* + * Copyright 2017 Sean Wang <sean.wang@mediatek.com> + * + * Sean Wang <sean.wang@mediatek.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "mt7623-mt6323.dtsi" + +/ { + model = "Bananapi BPI-R2"; + compatible = "bananapi,bpi-r2", "mediatek,mt7623n"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_a>; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 256 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 257 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_a>; + + red { + label = "bpi-r2:pio:red"; + gpios = <&pio 239 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green { + label = "bpi-r2:pio:green"; + gpios = <&pio 240 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue { + label = "bpi-r2:pio:blue"; + gpios = <&pio 241 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + memory@80000000 { + reg = <0 0x80000000 0 0x40000000>; + }; + + sound:sound { + compatible = "mediatek,mt2701-wm8960-machine"; + mediatek,platform = <&afe>; + audio-routing = + "Headphone", "HP_L", + "Headphone", "HP_R", + "LINPUT1", "AMIC", + "RINPUT1", "AMIC"; + mediatek,audio-codec = <&wm8960>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_pins_a>; + }; +}; + +&pio { + cir_pins_a:cir@0 { + pins_cir { + pinmux = <MT7623_PIN_46_IR_FUNC_IR>; + bias-disable; + }; + }; + + i2c0_pins_a: i2c@0 { + pins_i2c0 { + pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>, + <MT7623_PIN_76_SCL0_FUNC_SCL0>; + bias-disable; + }; + }; + + i2c1_pins_a: i2c@1 { + pin_i2c1 { + pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>, + <MT7623_PIN_58_SCL1_FUNC_SCL1>; + bias-disable; + }; + }; + + i2s0_pins_a: i2s@0 { + pin_i2s0 { + pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>, + <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>, + <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>, + <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>, + <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>; + drive-strength = <MTK_DRIVE_12mA>; + bias-pull-down; + }; + }; + + i2s1_pins_a: i2s@1 { + pin_i2s1 { + pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>, + <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>, + <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>, + <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>, + <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>; + drive-strength = <MTK_DRIVE_12mA>; + bias-pull-down; + }; + }; + + key_pins_a: keys@0 { + pins_keys { + pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>, + <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ; + input-enable; + }; + }; + + led_pins_a: leds@0 { + pins_leds { + pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>, + <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>, + <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>; + }; + }; + + mmc0_pins_default: mmc0default { + pins_cmd_dat { + pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, + <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, + <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, + <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>, + <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>, + <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>, + <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>, + <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, + <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; + input-enable; + bias-pull-up; + }; + + pins_clk { + pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; + bias-pull-down; + }; + + pins_rst { + pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc0_pins_uhs: mmc0 { + pins_cmd_dat { + pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, + <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, + <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, + <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>, + <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>, + <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>, + <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>, + <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, + <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_2mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_2mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_rst { + pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1default { + pins_cmd_dat { + pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, + <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, + <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, + <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, + <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; + bias-pull-down; + drive-strength = <MTK_DRIVE_4mA>; + }; + }; + + mmc1_pins_uhs: mmc1 { + pins_cmd_dat { + pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, + <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, + <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, + <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, + <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_clk { + pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + spi0_pins_a: spi@0 { + pins_spi { + pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>, + <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>, + <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>, + <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>; + bias-disable; + }; + }; + + pwm_pins_a: pwm@0 { + pins_pwm { + pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>, + <MT7623_PIN_204_PWM1_FUNC_PWM1>, + <MT7623_PIN_205_PWM2_FUNC_PWM2>, + <MT7623_PIN_206_PWM3_FUNC_PWM3>, + <MT7623_PIN_207_PWM4_FUNC_PWM4>; + }; + }; + + uart0_pins_a: uart@0 { + pins_dat { + pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>, + <MT7623_PIN_80_UTXD0_FUNC_UTXD0>; + }; + }; + + uart1_pins_a: uart@1 { + pins_dat { + pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>, + <MT7623_PIN_82_UTXD1_FUNC_UTXD1>; + }; + }; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&cir_pins_a>; + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "trgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + switch@0 { + compatible = "mediatek,mt7530"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + pinctrl-names = "default"; + reset-gpios = <&pio 33 0>; + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&pwrap { + mt6323 { + mt6323led: led { + compatible = "mediatek,mt6323-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "bpi-r2:isink:green"; + default-state = "off"; + }; + led@1 { + reg = <1>; + label = "bpi-r2:isink:red"; + default-state = "off"; + }; + led@2 { + reg = <2>; + label = "bpi-r2:isink:blue"; + default-state = "off"; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + wm8960: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins_a>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + status = "disabled"; +}; + +&uart2 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&usb1 { + vusb33-supply = <&mt6323_vusb_reg>; + status = "okay"; +}; + +&usb2 { + vusb33-supply = <&mt6323_vusb_reg>; + status = "okay"; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH v2 00/30] arm: dts: extend mt7623 support 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang ` (29 preceding siblings ...) 2017-04-26 9:26 ` [PATCH v2 30/30] arm: dts: mt7623: add dts file for Bananapi R2 (BPI-R2) board sean.wang @ 2017-05-10 9:58 ` Matthias Brugger 30 siblings, 0 replies; 46+ messages in thread From: Matthias Brugger @ 2017-05-10 9:58 UTC (permalink / raw) To: sean.wang, robh+dt, john, mark.rutland, linux, linus.walleij, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-gpio, linux-kernel Hi Sean, I queued patch 03/30 to 23/30 of this series in v4.11-next/dts32 Please resend the rest taking into account the comment from Rob. Thanks and sorry for the delay. Matthias On 26/04/17 11:25, sean.wang@mediatek.com wrote: > From: Sean Wang <sean.wang@mediatek.com> > > Changes since v1: > Continue the upstream journey based on the previous John Crispin's good work. > - add fixes for the v1 suggestion > - fix typo in the commit log > - add missing pinctrl bindings for mt7623 > - reuse pinctrl driver for mt7623 > - enhance existing nodes since the way for binding is changed e.g USB > - add more nodes which already gets support from the latest tree e.g MT7530 DSA > - add the dts file for Bananapi R2 (BPI-R2) board > > This series extends the dts files used for booting mt7623 base boards. > Since support for mt7623 was added around v4.6, many new drivers have > been accepted upstream. The contained patches add several of these to > the devicetree. > > Additionally the series does a bit of refactoring. Mediatek pointed out > that the evaluation board is infact a reference design and asked the the > evb files be renamed to rfb. > > As with all of the current ARM bases MTK silicon, these boards also have > a PMIC. Instead of adding the nodes to all of the dts files, we add an > intermediate dtsi file that contains the required nodes. This allows us > to reduce the size of the top most dts files. > > The RFB comes in various versions and asiarf has even done a crowdfunder > to sell them. We should try to reduce the duplication. This series adds > a common dtsi file for these boards. This results in the topmost dts files > only needing to specify the compatible string, MTD nodes and ethernet setup. > > John Crispin (14): > arm: dts: mt7623: add clock controller device nodes > arm: dts: mt7623: add subsystem clock controller device nodes > arm: dts: mt7623: add power domain controller device node > arm: dts: mt7623: add clock-frequency to the a7 timer node to > mt7623.dtsi > arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file > arm: dts: mt7623: add pmic wrapper nodes to the mt7623 dtsi file > arm: dts: mt7623: add i2c nodes to the mt7623.dtsi file > arm: dts: mt7623: add nand nodes to the mt7623.dtsi file > arm: dts: mt7623: add mmc nodes to the mt7623.dtsi file > arm: dts: mt7623: add usb nodes to the mt7623.dtsi file > arm: dts: mt7623: add mt7623-mt6323.dtsi file > arm: dts: mt7623: cleanup the mt7623n rfb uart nodes > arm: dts: mt7623: enable the usb device on the mt7623n rfb > arm: dts: mt7623: enable the nand device on the mt7623n nand rfb > > Sean Wang (16): > pinctrl: mediatek: Add missing pinctrl bindings for mt7623 > pinctrl: mediatek: reuse pinctrl driver for mt7623 > arm: dts: mt7623: add spi nodes to the mt7623.dtsi file > arm: dts: mt7623: add pwm nodes to the mt7623.dtsi file > arm: dts: mt7623: add ethernet nodes to the mt7623.dtsi file > arm: dts: mt7623: add crypto engine nodes to the mt7623.dtsi file > arm: dts: mt7623: add ir nodes to the mt7623.dtsi file > arm: dts: mt7623: add afe nodes to the mt7623.dtsi file > arm: dts: mt7623: add rng nodes to the mt7623.dtsi file > arm: dts: mt7623: add auxadc nodes to the mt7623.dtsi file > arm: dts: mt7623: add efuse nodes to the mt7623.dtsi file > arm: dts: mt7623: add thermal nodes to the mt7623.dtsi file > arm: dts: mt7623: add Sean as one of authors for mt7623.dtsi files > arm: dts: mt7623: rename mt7623-evb.dts to > arch/arm/boot/dts/mt7623n-rfb.dtsi > dt-bindings: add vendor prefix for bananapi > arm: dts: mt7623: add dts file for Bananapi R2 (BPI-R2) board > > Documentation/devicetree/bindings/arm/mediatek.txt | 8 +- > .../devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 1 - > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/mt7623-evb.dts | 33 - > arch/arm/boot/dts/mt7623-mt6323.dtsi | 269 +++ > arch/arm/boot/dts/mt7623.dtsi | 556 +++++- > arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 478 +++++ > arch/arm/boot/dts/mt7623n-rfb-nand.dts | 109 ++ > arch/arm/boot/dts/mt7623n-rfb.dtsi | 61 + > arch/arm/mach-mediatek/mediatek.c | 4 +- > arch/arm/mach-mediatek/platsmp.c | 2 +- > drivers/pinctrl/mediatek/Kconfig | 9 +- > drivers/pinctrl/mediatek/Makefile | 1 - > drivers/pinctrl/mediatek/pinctrl-mt7623.c | 379 ---- > drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h | 1936 -------------------- > include/dt-bindings/pinctrl/mt7623-pinfunc.h | 30 +- > 17 files changed, 1497 insertions(+), 2383 deletions(-) > delete mode 100644 arch/arm/boot/dts/mt7623-evb.dts > create mode 100644 arch/arm/boot/dts/mt7623-mt6323.dtsi > create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > create mode 100644 arch/arm/boot/dts/mt7623n-rfb-nand.dts > create mode 100644 arch/arm/boot/dts/mt7623n-rfb.dtsi > delete mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7623.c > delete mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h > ^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2017-05-10 9:58 UTC | newest] Thread overview: 46+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-04-26 9:25 [PATCH v2 00/30] arm: dts: extend mt7623 support sean.wang 2017-04-26 9:25 ` [PATCH v2 01/30] pinctrl: mediatek: Add missing pinctrl bindings for mt7623 sean.wang 2017-04-28 7:55 ` Linus Walleij 2017-04-26 9:25 ` [PATCH v2 02/30] pinctrl: mediatek: reuse pinctrl driver " sean.wang 2017-04-28 8:01 ` Linus Walleij 2017-05-01 6:44 ` Sean Wang 2017-04-26 9:25 ` [PATCH v2 03/30] arm: dts: mt7623: add clock controller device nodes sean.wang 2017-04-26 9:25 ` [PATCH v2 04/30] arm: dts: mt7623: add subsystem " sean.wang 2017-04-26 9:25 ` [PATCH v2 05/30] arm: dts: mt7623: add power domain controller device node sean.wang 2017-04-26 9:25 ` [PATCH v2 06/30] arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi sean.wang 2017-04-26 9:25 ` [PATCH v2 07/30] arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file sean.wang 2017-04-28 8:03 ` Linus Walleij 2017-04-26 9:25 ` [PATCH v2 08/30] arm: dts: mt7623: add pmic wrapper " sean.wang 2017-04-26 9:25 ` [PATCH v2 09/30] arm: dts: mt7623: add i2c nodes to the mt7623.dtsi file sean.wang 2017-04-26 9:25 ` [PATCH v2 10/30] arm: dts: mt7623: add spi " sean.wang 2017-04-26 9:25 ` [PATCH v2 11/30] arm: dts: mt7623: add nand " sean.wang 2017-04-26 9:25 ` [PATCH v2 12/30] arm: dts: mt7623: add mmc " sean.wang 2017-04-26 9:25 ` [PATCH v2 13/30] arm: dts: mt7623: add usb " sean.wang 2017-04-26 9:25 ` [PATCH v2 14/30] arm: dts: mt7623: add pwm " sean.wang 2017-04-26 9:25 ` [PATCH v2 15/30] arm: dts: mt7623: add ethernet " sean.wang 2017-04-26 9:26 ` [PATCH v2 16/30] arm: dts: mt7623: add crypto engine " sean.wang 2017-04-26 9:26 ` [PATCH v2 17/30] arm: dts: mt7623: add ir " sean.wang 2017-04-26 9:26 ` [PATCH v2 18/30] arm: dts: mt7623: add afe " sean.wang 2017-04-26 9:26 ` [PATCH v2 19/30] arm: dts: mt7623: add rng " sean.wang 2017-04-26 9:26 ` [PATCH v2 20/30] arm: dts: mt7623: add auxadc " sean.wang 2017-04-26 9:26 ` [PATCH v2 21/30] arm: dts: mt7623: add efuse " sean.wang 2017-04-26 9:26 ` [PATCH v2 22/30] arm: dts: mt7623: add thermal " sean.wang 2017-04-26 9:26 ` [PATCH v2 23/30] arm: dts: mt7623: add Sean as one of authors for mt7623.dtsi files sean.wang 2017-04-26 9:26 ` [PATCH v2 24/30] arm: dts: mt7623: add mt7623-mt6323.dtsi file sean.wang 2017-04-26 9:26 ` [PATCH v2 25/30] arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi sean.wang 2017-04-28 20:30 ` Rob Herring 2017-05-01 7:06 ` Sean Wang 2017-04-26 9:26 ` [PATCH v2 26/30] arm: dts: mt7623: cleanup the mt7623n rfb uart nodes sean.wang 2017-04-26 9:26 ` [PATCH v2 27/30] arm: dts: mt7623: enable the usb device on the mt7623n rfb sean.wang 2017-04-26 9:26 ` [PATCH v2 28/30] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb sean.wang 2017-04-26 9:26 ` [PATCH v2 29/30] dt-bindings: add vendor prefix for bananapi sean.wang 2017-04-28 20:37 ` Rob Herring 2017-05-01 6:58 ` Sean Wang 2017-05-02 13:52 ` Rob Herring 2017-05-08 9:53 ` Sean Wang 2017-05-08 11:36 ` Arnd Bergmann 2017-05-09 7:49 ` Matthias Brugger 2017-05-09 8:03 ` Chen-Yu Tsai 2017-05-09 9:40 ` Sean Wang 2017-04-26 9:26 ` [PATCH v2 30/30] arm: dts: mt7623: add dts file for Bananapi R2 (BPI-R2) board sean.wang 2017-05-10 9:58 ` [PATCH v2 00/30] arm: dts: extend mt7623 support Matthias Brugger
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).