* Re: [PATCH v1 1/1] scripts: dtc: mask flags bit when check i2c addr
2020-03-03 4:56 ` Rayagonda Kokatanur
@ 2020-03-03 16:12 ` Frank Rowand
2020-03-04 5:59 ` Rayagonda Kokatanur
2020-03-25 19:07 ` Rob Herring
2 siblings, 0 replies; 9+ messages in thread
From: Frank Rowand @ 2020-03-03 16:12 UTC (permalink / raw)
To: Rayagonda Kokatanur, Rob Herring
Cc: devicetree, linux-kernel, maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE
On 3/2/20 10:56 PM, Rayagonda Kokatanur wrote:
> On Fri, Feb 28, 2020 at 7:20 PM Rob Herring <robh+dt@kernel.org> wrote:
>>
>> On Fri, Feb 28, 2020 at 2:48 AM Rayagonda Kokatanur
>> <rayagonda.kokatanur@broadcom.com> wrote:
>>>
>>> Generally i2c addr should not be greater than 10-bit. The highest 2 bits
>>> are used for I2C_TEN_BIT_ADDRESS and I2C_OWN_SLAVE_ADDRESS. Need to mask
>>> these flags if check slave addr valid.
>>>
>>> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
>>> ---
>>> scripts/dtc/Makefile | 2 +-
>>> scripts/dtc/checks.c | 5 +++++
>>> 2 files changed, 6 insertions(+), 1 deletion(-)
>>
>> dtc changes must be submitted against upstream dtc.
>
> Please let me know link to clone the upstream dtc branch.
Info about the dtc upstream project:
https://elinux.org/Device_Tree_Reference#dtc_.28upstream_project.29
And the mail list to submit the patch to:
https://elinux.org/Device_Tree_Reference#Device-tree_Compiler_and_Tools_Mailing_List
-Frank
>>
>>
>>> diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
>>> index 3acbb410904c..c5e8d6a9e73c 100644
>>> --- a/scripts/dtc/Makefile
>>> +++ b/scripts/dtc/Makefile
>>> @@ -9,7 +9,7 @@ dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
>>> dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
>>>
>>> # Source files need to get at the userspace version of libfdt_env.h to compile
>>> -HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
>>> +HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt -I$(srctree)/tools/include
>>>
>>> ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
>>> ifneq ($(CHECK_DTBS),)
>>> diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
>>> index 756f0fa9203f..17c9ed4137b5 100644
>>> --- a/scripts/dtc/checks.c
>>> +++ b/scripts/dtc/checks.c
>>> @@ -3,6 +3,7 @@
>>> * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
>>> */
>>>
>>> +#include <linux/bits.h>
>>
>> Not a UAPI header not that that would be much better as dtc also builds on Mac.
>>
>>> #include "dtc.h"
>>> #include "srcpos.h"
>>>
>>> @@ -17,6 +18,9 @@
>>> #define TRACE(c, fmt, ...) do { } while (0)
>>> #endif
>>>
>>> +#define I2C_TEN_BIT_ADDRESS BIT(31)
>>> +#define I2C_OWN_SLAVE_ADDRESS BIT(30)
>>> +
>>> enum checkstatus {
>>> UNCHECKED = 0,
>>> PREREQ,
>>> @@ -1048,6 +1052,7 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
>>>
>>> for (len = prop->val.len; len > 0; len -= 4) {
>>> reg = fdt32_to_cpu(*(cells++));
>>> + reg &= ~(I2C_OWN_SLAVE_ADDRESS | I2C_TEN_BIT_ADDRESS);
>>
>> I'd just mask the top byte so we don't have to update on the next flag we add.
> Do you mean something like this, shown below ?
> reg &= 0xFFFF_FC000;
>
>>
>> Rob
>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v1 1/1] scripts: dtc: mask flags bit when check i2c addr
2020-03-03 4:56 ` Rayagonda Kokatanur
2020-03-03 16:12 ` Frank Rowand
@ 2020-03-04 5:59 ` Rayagonda Kokatanur
2020-03-24 5:41 ` Rayagonda Kokatanur
2020-03-25 19:07 ` Rob Herring
2 siblings, 1 reply; 9+ messages in thread
From: Rayagonda Kokatanur @ 2020-03-04 5:59 UTC (permalink / raw)
To: Rob Herring
Cc: Frank Rowand, devicetree, linux-kernel,
maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE
On Tue, Mar 3, 2020 at 10:26 AM Rayagonda Kokatanur
<rayagonda.kokatanur@broadcom.com> wrote:
>
> On Fri, Feb 28, 2020 at 7:20 PM Rob Herring <robh+dt@kernel.org> wrote:
> >
> > On Fri, Feb 28, 2020 at 2:48 AM Rayagonda Kokatanur
> > <rayagonda.kokatanur@broadcom.com> wrote:
> > >
> > > Generally i2c addr should not be greater than 10-bit. The highest 2 bits
> > > are used for I2C_TEN_BIT_ADDRESS and I2C_OWN_SLAVE_ADDRESS. Need to mask
> > > these flags if check slave addr valid.
> > >
> > > Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> > > ---
> > > scripts/dtc/Makefile | 2 +-
> > > scripts/dtc/checks.c | 5 +++++
> > > 2 files changed, 6 insertions(+), 1 deletion(-)
> >
> > dtc changes must be submitted against upstream dtc.
>
> Please let me know link to clone the upstream dtc branch.
> >
> >
> > > diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
> > > index 3acbb410904c..c5e8d6a9e73c 100644
> > > --- a/scripts/dtc/Makefile
> > > +++ b/scripts/dtc/Makefile
> > > @@ -9,7 +9,7 @@ dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
> > > dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
> > >
> > > # Source files need to get at the userspace version of libfdt_env.h to compile
> > > -HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
> > > +HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt -I$(srctree)/tools/include
> > >
> > > ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
> > > ifneq ($(CHECK_DTBS),)
> > > diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
> > > index 756f0fa9203f..17c9ed4137b5 100644
> > > --- a/scripts/dtc/checks.c
> > > +++ b/scripts/dtc/checks.c
> > > @@ -3,6 +3,7 @@
> > > * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
> > > */
> > >
> > > +#include <linux/bits.h>
> >
> > Not a UAPI header not that that would be much better as dtc also builds on Mac.
> >
> > > #include "dtc.h"
> > > #include "srcpos.h"
> > >
> > > @@ -17,6 +18,9 @@
> > > #define TRACE(c, fmt, ...) do { } while (0)
> > > #endif
> > >
> > > +#define I2C_TEN_BIT_ADDRESS BIT(31)
> > > +#define I2C_OWN_SLAVE_ADDRESS BIT(30)
> > > +
> > > enum checkstatus {
> > > UNCHECKED = 0,
> > > PREREQ,
> > > @@ -1048,6 +1052,7 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
> > >
> > > for (len = prop->val.len; len > 0; len -= 4) {
> > > reg = fdt32_to_cpu(*(cells++));
> > > + reg &= ~(I2C_OWN_SLAVE_ADDRESS | I2C_TEN_BIT_ADDRESS);
> >
> > I'd just mask the top byte so we don't have to update on the next flag we add.
> Do you mean something like this, shown below ?
> reg &= 0xFFFF_FC000;
Hi Rob, waiting for your answer.
>
> >
> > Rob
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v1 1/1] scripts: dtc: mask flags bit when check i2c addr
2020-03-04 5:59 ` Rayagonda Kokatanur
@ 2020-03-24 5:41 ` Rayagonda Kokatanur
0 siblings, 0 replies; 9+ messages in thread
From: Rayagonda Kokatanur @ 2020-03-24 5:41 UTC (permalink / raw)
To: Rob Herring
Cc: Frank Rowand, devicetree, linux-kernel,
maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE
On Wed, Mar 4, 2020 at 11:29 AM Rayagonda Kokatanur
<rayagonda.kokatanur@broadcom.com> wrote:
>
> On Tue, Mar 3, 2020 at 10:26 AM Rayagonda Kokatanur
> <rayagonda.kokatanur@broadcom.com> wrote:
> >
> > On Fri, Feb 28, 2020 at 7:20 PM Rob Herring <robh+dt@kernel.org> wrote:
> > >
> > > On Fri, Feb 28, 2020 at 2:48 AM Rayagonda Kokatanur
> > > <rayagonda.kokatanur@broadcom.com> wrote:
> > > >
> > > > Generally i2c addr should not be greater than 10-bit. The highest 2 bits
> > > > are used for I2C_TEN_BIT_ADDRESS and I2C_OWN_SLAVE_ADDRESS. Need to mask
> > > > these flags if check slave addr valid.
> > > >
> > > > Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> > > > ---
> > > > scripts/dtc/Makefile | 2 +-
> > > > scripts/dtc/checks.c | 5 +++++
> > > > 2 files changed, 6 insertions(+), 1 deletion(-)
> > >
> > > dtc changes must be submitted against upstream dtc.
> >
> > Please let me know link to clone the upstream dtc branch.
> > >
> > >
> > > > diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
> > > > index 3acbb410904c..c5e8d6a9e73c 100644
> > > > --- a/scripts/dtc/Makefile
> > > > +++ b/scripts/dtc/Makefile
> > > > @@ -9,7 +9,7 @@ dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
> > > > dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
> > > >
> > > > # Source files need to get at the userspace version of libfdt_env.h to compile
> > > > -HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
> > > > +HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt -I$(srctree)/tools/include
> > > >
> > > > ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
> > > > ifneq ($(CHECK_DTBS),)
> > > > diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
> > > > index 756f0fa9203f..17c9ed4137b5 100644
> > > > --- a/scripts/dtc/checks.c
> > > > +++ b/scripts/dtc/checks.c
> > > > @@ -3,6 +3,7 @@
> > > > * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
> > > > */
> > > >
> > > > +#include <linux/bits.h>
> > >
> > > Not a UAPI header not that that would be much better as dtc also builds on Mac.
> > >
> > > > #include "dtc.h"
> > > > #include "srcpos.h"
> > > >
> > > > @@ -17,6 +18,9 @@
> > > > #define TRACE(c, fmt, ...) do { } while (0)
> > > > #endif
> > > >
> > > > +#define I2C_TEN_BIT_ADDRESS BIT(31)
> > > > +#define I2C_OWN_SLAVE_ADDRESS BIT(30)
> > > > +
> > > > enum checkstatus {
> > > > UNCHECKED = 0,
> > > > PREREQ,
> > > > @@ -1048,6 +1052,7 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
> > > >
> > > > for (len = prop->val.len; len > 0; len -= 4) {
> > > > reg = fdt32_to_cpu(*(cells++));
> > > > + reg &= ~(I2C_OWN_SLAVE_ADDRESS | I2C_TEN_BIT_ADDRESS);
> > >
> > > I'd just mask the top byte so we don't have to update on the next flag we add.
> > Do you mean something like this, shown below ?
> > reg &= 0xFFFF_FC000;
>
> Hi Rob, waiting for your answer.
Hi Rob,
Waiting for your answer.
>
> >
> > >
> > > Rob
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v1 1/1] scripts: dtc: mask flags bit when check i2c addr
2020-03-03 4:56 ` Rayagonda Kokatanur
2020-03-03 16:12 ` Frank Rowand
2020-03-04 5:59 ` Rayagonda Kokatanur
@ 2020-03-25 19:07 ` Rob Herring
2020-03-26 4:34 ` Rayagonda Kokatanur
2 siblings, 1 reply; 9+ messages in thread
From: Rob Herring @ 2020-03-25 19:07 UTC (permalink / raw)
To: Rayagonda Kokatanur
Cc: Frank Rowand, devicetree, linux-kernel,
maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE
On Mon, Mar 2, 2020 at 9:56 PM Rayagonda Kokatanur
<rayagonda.kokatanur@broadcom.com> wrote:
>
> On Fri, Feb 28, 2020 at 7:20 PM Rob Herring <robh+dt@kernel.org> wrote:
> >
> > On Fri, Feb 28, 2020 at 2:48 AM Rayagonda Kokatanur
> > <rayagonda.kokatanur@broadcom.com> wrote:
> > >
> > > Generally i2c addr should not be greater than 10-bit. The highest 2 bits
> > > are used for I2C_TEN_BIT_ADDRESS and I2C_OWN_SLAVE_ADDRESS. Need to mask
> > > these flags if check slave addr valid.
> > >
> > > Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> > > ---
> > > scripts/dtc/Makefile | 2 +-
> > > scripts/dtc/checks.c | 5 +++++
> > > 2 files changed, 6 insertions(+), 1 deletion(-)
> >
> > dtc changes must be submitted against upstream dtc.
>
> Please let me know link to clone the upstream dtc branch.
> >
> >
> > > diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
> > > index 3acbb410904c..c5e8d6a9e73c 100644
> > > --- a/scripts/dtc/Makefile
> > > +++ b/scripts/dtc/Makefile
> > > @@ -9,7 +9,7 @@ dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
> > > dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
> > >
> > > # Source files need to get at the userspace version of libfdt_env.h to compile
> > > -HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
> > > +HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt -I$(srctree)/tools/include
> > >
> > > ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
> > > ifneq ($(CHECK_DTBS),)
> > > diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
> > > index 756f0fa9203f..17c9ed4137b5 100644
> > > --- a/scripts/dtc/checks.c
> > > +++ b/scripts/dtc/checks.c
> > > @@ -3,6 +3,7 @@
> > > * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
> > > */
> > >
> > > +#include <linux/bits.h>
> >
> > Not a UAPI header not that that would be much better as dtc also builds on Mac.
> >
> > > #include "dtc.h"
> > > #include "srcpos.h"
> > >
> > > @@ -17,6 +18,9 @@
> > > #define TRACE(c, fmt, ...) do { } while (0)
> > > #endif
> > >
> > > +#define I2C_TEN_BIT_ADDRESS BIT(31)
> > > +#define I2C_OWN_SLAVE_ADDRESS BIT(30)
> > > +
> > > enum checkstatus {
> > > UNCHECKED = 0,
> > > PREREQ,
> > > @@ -1048,6 +1052,7 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
> > >
> > > for (len = prop->val.len; len > 0; len -= 4) {
> > > reg = fdt32_to_cpu(*(cells++));
> > > + reg &= ~(I2C_OWN_SLAVE_ADDRESS | I2C_TEN_BIT_ADDRESS);
> >
> > I'd just mask the top byte so we don't have to update on the next flag we add.
> Do you mean something like this, shown below ?
> reg &= 0xFFFF_FC000;
Yes, but as I said, the 'top byte', so 0xFF000000.
Rob
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v1 1/1] scripts: dtc: mask flags bit when check i2c addr
2020-03-25 19:07 ` Rob Herring
@ 2020-03-26 4:34 ` Rayagonda Kokatanur
2020-03-26 5:53 ` Rayagonda Kokatanur
0 siblings, 1 reply; 9+ messages in thread
From: Rayagonda Kokatanur @ 2020-03-26 4:34 UTC (permalink / raw)
To: Rob Herring
Cc: Frank Rowand, devicetree, linux-kernel,
maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE
On Thu, Mar 26, 2020 at 12:37 AM Rob Herring <robh+dt@kernel.org> wrote:
>
> On Mon, Mar 2, 2020 at 9:56 PM Rayagonda Kokatanur
> <rayagonda.kokatanur@broadcom.com> wrote:
> >
> > On Fri, Feb 28, 2020 at 7:20 PM Rob Herring <robh+dt@kernel.org> wrote:
> > >
> > > On Fri, Feb 28, 2020 at 2:48 AM Rayagonda Kokatanur
> > > <rayagonda.kokatanur@broadcom.com> wrote:
> > > >
> > > > Generally i2c addr should not be greater than 10-bit. The highest 2 bits
> > > > are used for I2C_TEN_BIT_ADDRESS and I2C_OWN_SLAVE_ADDRESS. Need to mask
> > > > these flags if check slave addr valid.
> > > >
> > > > Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> > > > ---
> > > > scripts/dtc/Makefile | 2 +-
> > > > scripts/dtc/checks.c | 5 +++++
> > > > 2 files changed, 6 insertions(+), 1 deletion(-)
> > >
> > > dtc changes must be submitted against upstream dtc.
> >
> > Please let me know link to clone the upstream dtc branch.
> > >
> > >
> > > > diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
> > > > index 3acbb410904c..c5e8d6a9e73c 100644
> > > > --- a/scripts/dtc/Makefile
> > > > +++ b/scripts/dtc/Makefile
> > > > @@ -9,7 +9,7 @@ dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
> > > > dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
> > > >
> > > > # Source files need to get at the userspace version of libfdt_env.h to compile
> > > > -HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
> > > > +HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt -I$(srctree)/tools/include
> > > >
> > > > ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
> > > > ifneq ($(CHECK_DTBS),)
> > > > diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
> > > > index 756f0fa9203f..17c9ed4137b5 100644
> > > > --- a/scripts/dtc/checks.c
> > > > +++ b/scripts/dtc/checks.c
> > > > @@ -3,6 +3,7 @@
> > > > * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
> > > > */
> > > >
> > > > +#include <linux/bits.h>
> > >
> > > Not a UAPI header not that that would be much better as dtc also builds on Mac.
> > >
> > > > #include "dtc.h"
> > > > #include "srcpos.h"
> > > >
> > > > @@ -17,6 +18,9 @@
> > > > #define TRACE(c, fmt, ...) do { } while (0)
> > > > #endif
> > > >
> > > > +#define I2C_TEN_BIT_ADDRESS BIT(31)
> > > > +#define I2C_OWN_SLAVE_ADDRESS BIT(30)
> > > > +
> > > > enum checkstatus {
> > > > UNCHECKED = 0,
> > > > PREREQ,
> > > > @@ -1048,6 +1052,7 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
> > > >
> > > > for (len = prop->val.len; len > 0; len -= 4) {
> > > > reg = fdt32_to_cpu(*(cells++));
> > > > + reg &= ~(I2C_OWN_SLAVE_ADDRESS | I2C_TEN_BIT_ADDRESS);
> > >
> > > I'd just mask the top byte so we don't have to update on the next flag we add.
> > Do you mean something like this, shown below ?
> > reg &= 0xFFFF_FC000;
>
> Yes, but as I said, the 'top byte', so 0xFF000000.
Thank you, will do as per your suggestion and send v2.
>
> Rob
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v1 1/1] scripts: dtc: mask flags bit when check i2c addr
2020-03-26 4:34 ` Rayagonda Kokatanur
@ 2020-03-26 5:53 ` Rayagonda Kokatanur
0 siblings, 0 replies; 9+ messages in thread
From: Rayagonda Kokatanur @ 2020-03-26 5:53 UTC (permalink / raw)
To: Rob Herring
Cc: Frank Rowand, devicetree, linux-kernel,
maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE
On Thu, Mar 26, 2020 at 10:04 AM Rayagonda Kokatanur
<rayagonda.kokatanur@broadcom.com> wrote:
>
> On Thu, Mar 26, 2020 at 12:37 AM Rob Herring <robh+dt@kernel.org> wrote:
> >
> > On Mon, Mar 2, 2020 at 9:56 PM Rayagonda Kokatanur
> > <rayagonda.kokatanur@broadcom.com> wrote:
> > >
> > > On Fri, Feb 28, 2020 at 7:20 PM Rob Herring <robh+dt@kernel.org> wrote:
> > > >
> > > > On Fri, Feb 28, 2020 at 2:48 AM Rayagonda Kokatanur
> > > > <rayagonda.kokatanur@broadcom.com> wrote:
> > > > >
> > > > > Generally i2c addr should not be greater than 10-bit. The highest 2 bits
> > > > > are used for I2C_TEN_BIT_ADDRESS and I2C_OWN_SLAVE_ADDRESS. Need to mask
> > > > > these flags if check slave addr valid.
> > > > >
> > > > > Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
> > > > > ---
> > > > > scripts/dtc/Makefile | 2 +-
> > > > > scripts/dtc/checks.c | 5 +++++
> > > > > 2 files changed, 6 insertions(+), 1 deletion(-)
> > > >
> > > > dtc changes must be submitted against upstream dtc.
> > >
> > > Please let me know link to clone the upstream dtc branch.
> > > >
> > > >
> > > > > diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
> > > > > index 3acbb410904c..c5e8d6a9e73c 100644
> > > > > --- a/scripts/dtc/Makefile
> > > > > +++ b/scripts/dtc/Makefile
> > > > > @@ -9,7 +9,7 @@ dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
> > > > > dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
> > > > >
> > > > > # Source files need to get at the userspace version of libfdt_env.h to compile
> > > > > -HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt
> > > > > +HOST_EXTRACFLAGS := -I $(srctree)/$(src)/libfdt -I$(srctree)/tools/include
> > > > >
> > > > > ifeq ($(shell pkg-config --exists yaml-0.1 2>/dev/null && echo yes),)
> > > > > ifneq ($(CHECK_DTBS),)
> > > > > diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
> > > > > index 756f0fa9203f..17c9ed4137b5 100644
> > > > > --- a/scripts/dtc/checks.c
> > > > > +++ b/scripts/dtc/checks.c
> > > > > @@ -3,6 +3,7 @@
> > > > > * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
> > > > > */
> > > > >
> > > > > +#include <linux/bits.h>
> > > >
> > > > Not a UAPI header not that that would be much better as dtc also builds on Mac.
> > > >
> > > > > #include "dtc.h"
> > > > > #include "srcpos.h"
> > > > >
> > > > > @@ -17,6 +18,9 @@
> > > > > #define TRACE(c, fmt, ...) do { } while (0)
> > > > > #endif
> > > > >
> > > > > +#define I2C_TEN_BIT_ADDRESS BIT(31)
> > > > > +#define I2C_OWN_SLAVE_ADDRESS BIT(30)
> > > > > +
> > > > > enum checkstatus {
> > > > > UNCHECKED = 0,
> > > > > PREREQ,
> > > > > @@ -1048,6 +1052,7 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
> > > > >
> > > > > for (len = prop->val.len; len > 0; len -= 4) {
> > > > > reg = fdt32_to_cpu(*(cells++));
> > > > > + reg &= ~(I2C_OWN_SLAVE_ADDRESS | I2C_TEN_BIT_ADDRESS);
> > > >
> > > > I'd just mask the top byte so we don't have to update on the next flag we add.
> > > Do you mean something like this, shown below ?
> > > reg &= 0xFFFF_FC000;
> >
> > Yes, but as I said, the 'top byte', so 0xFF000000.
> Thank you, will do as per your suggestion and send v2.
Hi Rob,
I have pushed separate patch which is prepared against dtc master branch.
Please review.
> >
> > Rob
^ permalink raw reply [flat|nested] 9+ messages in thread