* [PATCH 0/2] ACPI: Update DBG2 Serial Port Subtypes list @ 2021-07-14 21:43 Marcin Wojtas 2021-07-14 21:43 ` [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes Marcin Wojtas 2021-07-14 21:43 ` [PATCH 2/2] ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype Marcin Wojtas 0 siblings, 2 replies; 9+ messages in thread From: Marcin Wojtas @ 2021-07-14 21:43 UTC (permalink / raw) To: linux-kernel, linux-acpi, devel Cc: jaz, gjb, upstream, Samer.El-Haj-Mahmoud, jon, tn, rjw, lenb, robert.moore, Marcin Wojtas Hi, This short patchset adds support for the new 16550-compatible serial port subtype in the spcr.c driver, using the definition from updated ACPICA header. I'm looking forward to the comments or remarks. Best regards, Marcin Marcin Wojtas (2): ACPICA: Add new DBG2 Serial Port Subtypes ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype include/acpi/actbl1.h | 15 ++++++++++++++- drivers/acpi/spcr.c | 1 + 2 files changed, 15 insertions(+), 1 deletion(-) -- 2.29.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes 2021-07-14 21:43 [PATCH 0/2] ACPI: Update DBG2 Serial Port Subtypes list Marcin Wojtas @ 2021-07-14 21:43 ` Marcin Wojtas 2021-07-15 14:07 ` Moore, Robert 2021-07-14 21:43 ` [PATCH 2/2] ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype Marcin Wojtas 1 sibling, 1 reply; 9+ messages in thread From: Marcin Wojtas @ 2021-07-14 21:43 UTC (permalink / raw) To: linux-kernel, linux-acpi, devel Cc: jaz, gjb, upstream, Samer.El-Haj-Mahmoud, jon, tn, rjw, lenb, robert.moore, Marcin Wojtas ACPICA commit d95c7d206b5836c7770e8e9cd613859887fded8f The Microsoft Debug Port Table 2 (DBG2) specification revision September 21, 2020 comprises additional Serial Port Subtypes [1]. Reflect that in the actbl1.h header file. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table Link: https://github.com/acpica/acpica/commit/d95c7d20 Signed-off-by: Marcin Wojtas <mw@semihalf.com> --- include/acpi/actbl1.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index ef2872dea01c..7bbb3e2bd33f 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -482,7 +482,7 @@ struct acpi_csrt_descriptor { * DBG2 - Debug Port Table 2 * Version 0 (Both main table and subtables) * - * Conforms to "Microsoft Debug Port Table 2 (DBG2)", December 10, 2015 + * Conforms to "Microsoft Debug Port Table 2 (DBG2)", September 21, 2020 * ******************************************************************************/ @@ -532,11 +532,24 @@ struct acpi_dbg2_device { #define ACPI_DBG2_16550_COMPATIBLE 0x0000 #define ACPI_DBG2_16550_SUBSET 0x0001 +#define ACPI_DBG2_MAX311XE_SPI 0x0002 #define ACPI_DBG2_ARM_PL011 0x0003 +#define ACPI_DBG2_MSM8X60 0x0004 +#define ACPI_DBG2_16550_NVIDIA 0x0005 +#define ACPI_DBG2_TI_OMAP 0x0006 +#define ACPI_DBG2_APM88XXXX 0x0008 +#define ACPI_DBG2_MSM8974 0x0009 +#define ACPI_DBG2_SAM5250 0x000A +#define ACPI_DBG2_INTEL_USIF 0x000B +#define ACPI_DBG2_IMX6 0x000C #define ACPI_DBG2_ARM_SBSA_32BIT 0x000D #define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E #define ACPI_DBG2_ARM_DCC 0x000F #define ACPI_DBG2_BCM2835 0x0010 +#define ACPI_DBG2_SDM845_1_8432MHZ 0x0011 +#define ACPI_DBG2_16550_WITH_GAS 0x0012 +#define ACPI_DBG2_SDM845_7_372MHZ 0x0013 +#define ACPI_DBG2_INTEL_LPSS 0x0014 #define ACPI_DBG2_1394_STANDARD 0x0000 -- 2.29.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* RE: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes 2021-07-14 21:43 ` [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes Marcin Wojtas @ 2021-07-15 14:07 ` Moore, Robert 2021-07-15 14:17 ` Marcin Wojtas 0 siblings, 1 reply; 9+ messages in thread From: Moore, Robert @ 2021-07-15 14:07 UTC (permalink / raw) To: Marcin Wojtas, linux-kernel, linux-acpi, devel Cc: jaz, gjb, upstream, Samer.El-Haj-Mahmoud, jon, tn, rjw, lenb This was already reported (with a patch that we've already merged) by semihalf-wojtas-marcin -----Original Message----- From: Marcin Wojtas <mw@semihalf.com> Sent: Wednesday, July 14, 2021 2:44 PM To: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; devel@acpica.org Cc: jaz@semihalf.com; gjb@semihalf.com; upstream@semihalf.com; Samer.El-Haj-Mahmoud@arm.com; jon@solid-run.com; tn@semihalf.com; rjw@rjwysocki.net; lenb@kernel.org; Moore, Robert <robert.moore@intel.com>; Marcin Wojtas <mw@semihalf.com> Subject: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes ACPICA commit d95c7d206b5836c7770e8e9cd613859887fded8f The Microsoft Debug Port Table 2 (DBG2) specification revision September 21, 2020 comprises additional Serial Port Subtypes [1]. Reflect that in the actbl1.h header file. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table Link: https://github.com/acpica/acpica/commit/d95c7d20 Signed-off-by: Marcin Wojtas <mw@semihalf.com> --- include/acpi/actbl1.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index ef2872dea01c..7bbb3e2bd33f 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -482,7 +482,7 @@ struct acpi_csrt_descriptor { * DBG2 - Debug Port Table 2 * Version 0 (Both main table and subtables) * - * Conforms to "Microsoft Debug Port Table 2 (DBG2)", December 10, 2015 + * Conforms to "Microsoft Debug Port Table 2 (DBG2)", September 21, + 2020 * ******************************************************************************/ @@ -532,11 +532,24 @@ struct acpi_dbg2_device { #define ACPI_DBG2_16550_COMPATIBLE 0x0000 #define ACPI_DBG2_16550_SUBSET 0x0001 +#define ACPI_DBG2_MAX311XE_SPI 0x0002 #define ACPI_DBG2_ARM_PL011 0x0003 +#define ACPI_DBG2_MSM8X60 0x0004 +#define ACPI_DBG2_16550_NVIDIA 0x0005 +#define ACPI_DBG2_TI_OMAP 0x0006 +#define ACPI_DBG2_APM88XXXX 0x0008 +#define ACPI_DBG2_MSM8974 0x0009 +#define ACPI_DBG2_SAM5250 0x000A +#define ACPI_DBG2_INTEL_USIF 0x000B +#define ACPI_DBG2_IMX6 0x000C #define ACPI_DBG2_ARM_SBSA_32BIT 0x000D #define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E #define ACPI_DBG2_ARM_DCC 0x000F #define ACPI_DBG2_BCM2835 0x0010 +#define ACPI_DBG2_SDM845_1_8432MHZ 0x0011 +#define ACPI_DBG2_16550_WITH_GAS 0x0012 +#define ACPI_DBG2_SDM845_7_372MHZ 0x0013 +#define ACPI_DBG2_INTEL_LPSS 0x0014 #define ACPI_DBG2_1394_STANDARD 0x0000 -- 2.29.0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes 2021-07-15 14:07 ` Moore, Robert @ 2021-07-15 14:17 ` Marcin Wojtas 2021-07-15 15:44 ` Moore, Robert 0 siblings, 1 reply; 9+ messages in thread From: Marcin Wojtas @ 2021-07-15 14:17 UTC (permalink / raw) To: Moore, Robert Cc: linux-kernel, linux-acpi, devel, jaz, gjb, upstream, Samer.El-Haj-Mahmoud, jon, tn, rjw, lenb Hi, czw., 15 lip 2021 o 16:07 Moore, Robert <robert.moore@intel.com> napisał(a): > > This was already reported (with a patch that we've already merged) by semihalf-wojtas-marcin > I'm not sure to be aware of the process. Reported where? Are you planning to import the upstream patch on your own and I should rebase the SPCR driver change on top once it lands? Best regards, Marcin > -----Original Message----- > From: Marcin Wojtas <mw@semihalf.com> > Sent: Wednesday, July 14, 2021 2:44 PM > To: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; devel@acpica.org > Cc: jaz@semihalf.com; gjb@semihalf.com; upstream@semihalf.com; Samer.El-Haj-Mahmoud@arm.com; jon@solid-run.com; tn@semihalf.com; rjw@rjwysocki.net; lenb@kernel.org; Moore, Robert <robert.moore@intel.com>; Marcin Wojtas <mw@semihalf.com> > Subject: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes > > ACPICA commit d95c7d206b5836c7770e8e9cd613859887fded8f > > The Microsoft Debug Port Table 2 (DBG2) specification revision September 21, 2020 comprises additional Serial Port Subtypes [1]. > Reflect that in the actbl1.h header file. > > [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table > > Link: https://github.com/acpica/acpica/commit/d95c7d20 > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > --- > include/acpi/actbl1.h | 15 ++++++++++++++- > 1 file changed, 14 insertions(+), 1 deletion(-) > > diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index ef2872dea01c..7bbb3e2bd33f 100644 > --- a/include/acpi/actbl1.h > +++ b/include/acpi/actbl1.h > @@ -482,7 +482,7 @@ struct acpi_csrt_descriptor { > * DBG2 - Debug Port Table 2 > * Version 0 (Both main table and subtables) > * > - * Conforms to "Microsoft Debug Port Table 2 (DBG2)", December 10, 2015 > + * Conforms to "Microsoft Debug Port Table 2 (DBG2)", September 21, > + 2020 > * > ******************************************************************************/ > > @@ -532,11 +532,24 @@ struct acpi_dbg2_device { > > #define ACPI_DBG2_16550_COMPATIBLE 0x0000 > #define ACPI_DBG2_16550_SUBSET 0x0001 > +#define ACPI_DBG2_MAX311XE_SPI 0x0002 > #define ACPI_DBG2_ARM_PL011 0x0003 > +#define ACPI_DBG2_MSM8X60 0x0004 > +#define ACPI_DBG2_16550_NVIDIA 0x0005 > +#define ACPI_DBG2_TI_OMAP 0x0006 > +#define ACPI_DBG2_APM88XXXX 0x0008 > +#define ACPI_DBG2_MSM8974 0x0009 > +#define ACPI_DBG2_SAM5250 0x000A > +#define ACPI_DBG2_INTEL_USIF 0x000B > +#define ACPI_DBG2_IMX6 0x000C > #define ACPI_DBG2_ARM_SBSA_32BIT 0x000D > #define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E > #define ACPI_DBG2_ARM_DCC 0x000F > #define ACPI_DBG2_BCM2835 0x0010 > +#define ACPI_DBG2_SDM845_1_8432MHZ 0x0011 > +#define ACPI_DBG2_16550_WITH_GAS 0x0012 > +#define ACPI_DBG2_SDM845_7_372MHZ 0x0013 > +#define ACPI_DBG2_INTEL_LPSS 0x0014 > > #define ACPI_DBG2_1394_STANDARD 0x0000 > > -- > 2.29.0 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes 2021-07-15 14:17 ` Marcin Wojtas @ 2021-07-15 15:44 ` Moore, Robert 2021-07-15 15:46 ` Marcin Wojtas 0 siblings, 1 reply; 9+ messages in thread From: Moore, Robert @ 2021-07-15 15:44 UTC (permalink / raw) To: Marcin Wojtas Cc: linux-kernel, linux-acpi, devel, jaz, gjb, upstream, Samer.El-Haj-Mahmoud, jon, tn, rjw, lenb The patch was posted as a pull request on our github site. The merged patch will be released as part of the normal ACPICA release process, which will then make it into Linux. You should then rebase. Bob -----Original Message----- From: Marcin Wojtas <mw@semihalf.com> Sent: Thursday, July 15, 2021 7:17 AM To: Moore, Robert <robert.moore@intel.com> Cc: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; devel@acpica.org; jaz@semihalf.com; gjb@semihalf.com; upstream@semihalf.com; Samer.El-Haj-Mahmoud@arm.com; jon@solid-run.com; tn@semihalf.com; rjw@rjwysocki.net; lenb@kernel.org Subject: Re: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes Hi, czw., 15 lip 2021 o 16:07 Moore, Robert <robert.moore@intel.com> napisał(a): > > This was already reported (with a patch that we've already merged) by > semihalf-wojtas-marcin > I'm not sure to be aware of the process. Reported where? Are you planning to import the upstream patch on your own and I should rebase the SPCR driver change on top once it lands? Best regards, Marcin > -----Original Message----- > From: Marcin Wojtas <mw@semihalf.com> > Sent: Wednesday, July 14, 2021 2:44 PM > To: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; > devel@acpica.org > Cc: jaz@semihalf.com; gjb@semihalf.com; upstream@semihalf.com; > Samer.El-Haj-Mahmoud@arm.com; jon@solid-run.com; tn@semihalf.com; > rjw@rjwysocki.net; lenb@kernel.org; Moore, Robert > <robert.moore@intel.com>; Marcin Wojtas <mw@semihalf.com> > Subject: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes > > ACPICA commit d95c7d206b5836c7770e8e9cd613859887fded8f > > The Microsoft Debug Port Table 2 (DBG2) specification revision September 21, 2020 comprises additional Serial Port Subtypes [1]. > Reflect that in the actbl1.h header file. > > [1] > https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi > -debug-port-table > > Link: https://github.com/acpica/acpica/commit/d95c7d20 > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > --- > include/acpi/actbl1.h | 15 ++++++++++++++- > 1 file changed, 14 insertions(+), 1 deletion(-) > > diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index > ef2872dea01c..7bbb3e2bd33f 100644 > --- a/include/acpi/actbl1.h > +++ b/include/acpi/actbl1.h > @@ -482,7 +482,7 @@ struct acpi_csrt_descriptor { > * DBG2 - Debug Port Table 2 > * Version 0 (Both main table and subtables) > * > - * Conforms to "Microsoft Debug Port Table 2 (DBG2)", December 10, > 2015 > + * Conforms to "Microsoft Debug Port Table 2 (DBG2)", September 21, > + 2020 > * > > ********************************************************************** > ********/ > > @@ -532,11 +532,24 @@ struct acpi_dbg2_device { > > #define ACPI_DBG2_16550_COMPATIBLE 0x0000 > #define ACPI_DBG2_16550_SUBSET 0x0001 > +#define ACPI_DBG2_MAX311XE_SPI 0x0002 > #define ACPI_DBG2_ARM_PL011 0x0003 > +#define ACPI_DBG2_MSM8X60 0x0004 > +#define ACPI_DBG2_16550_NVIDIA 0x0005 > +#define ACPI_DBG2_TI_OMAP 0x0006 > +#define ACPI_DBG2_APM88XXXX 0x0008 > +#define ACPI_DBG2_MSM8974 0x0009 > +#define ACPI_DBG2_SAM5250 0x000A > +#define ACPI_DBG2_INTEL_USIF 0x000B > +#define ACPI_DBG2_IMX6 0x000C > #define ACPI_DBG2_ARM_SBSA_32BIT 0x000D > #define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E > #define ACPI_DBG2_ARM_DCC 0x000F > #define ACPI_DBG2_BCM2835 0x0010 > +#define ACPI_DBG2_SDM845_1_8432MHZ 0x0011 > +#define ACPI_DBG2_16550_WITH_GAS 0x0012 > +#define ACPI_DBG2_SDM845_7_372MHZ 0x0013 > +#define ACPI_DBG2_INTEL_LPSS 0x0014 > > #define ACPI_DBG2_1394_STANDARD 0x0000 > > -- > 2.29.0 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes 2021-07-15 15:44 ` Moore, Robert @ 2021-07-15 15:46 ` Marcin Wojtas 2021-07-16 14:08 ` Moore, Robert 0 siblings, 1 reply; 9+ messages in thread From: Marcin Wojtas @ 2021-07-15 15:46 UTC (permalink / raw) To: Moore, Robert Cc: linux-kernel, linux-acpi, devel, jaz, gjb, upstream, Samer.El-Haj-Mahmoud, jon, tn, rjw, lenb czw., 15 lip 2021 o 17:44 Moore, Robert <robert.moore@intel.com> napisał(a): > > The patch was posted as a pull request on our github site. > I'm aware of that, semihalf-wojtas-marcin is me :) > The merged patch will be released as part of the normal ACPICA release process, which will then make it into Linux. You should then rebase. Ok, thanks for explanation. When approximately can this happen? Best regards, Marcin > Bob > > > -----Original Message----- > From: Marcin Wojtas <mw@semihalf.com> > Sent: Thursday, July 15, 2021 7:17 AM > To: Moore, Robert <robert.moore@intel.com> > Cc: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; devel@acpica.org; jaz@semihalf.com; gjb@semihalf.com; upstream@semihalf.com; Samer.El-Haj-Mahmoud@arm.com; jon@solid-run.com; tn@semihalf.com; rjw@rjwysocki.net; lenb@kernel.org > Subject: Re: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes > > Hi, > > > czw., 15 lip 2021 o 16:07 Moore, Robert <robert.moore@intel.com> napisał(a): > > > > This was already reported (with a patch that we've already merged) by > > semihalf-wojtas-marcin > > > > I'm not sure to be aware of the process. Reported where? > Are you planning to import the upstream patch on your own and I should rebase the SPCR driver change on top once it lands? > > Best regards, > Marcin > > > -----Original Message----- > > From: Marcin Wojtas <mw@semihalf.com> > > Sent: Wednesday, July 14, 2021 2:44 PM > > To: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; > > devel@acpica.org > > Cc: jaz@semihalf.com; gjb@semihalf.com; upstream@semihalf.com; > > Samer.El-Haj-Mahmoud@arm.com; jon@solid-run.com; tn@semihalf.com; > > rjw@rjwysocki.net; lenb@kernel.org; Moore, Robert > > <robert.moore@intel.com>; Marcin Wojtas <mw@semihalf.com> > > Subject: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes > > > > ACPICA commit d95c7d206b5836c7770e8e9cd613859887fded8f > > > > The Microsoft Debug Port Table 2 (DBG2) specification revision September 21, 2020 comprises additional Serial Port Subtypes [1]. > > Reflect that in the actbl1.h header file. > > > > [1] > > https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi > > -debug-port-table > > > > Link: https://github.com/acpica/acpica/commit/d95c7d20 > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > --- > > include/acpi/actbl1.h | 15 ++++++++++++++- > > 1 file changed, 14 insertions(+), 1 deletion(-) > > > > diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index > > ef2872dea01c..7bbb3e2bd33f 100644 > > --- a/include/acpi/actbl1.h > > +++ b/include/acpi/actbl1.h > > @@ -482,7 +482,7 @@ struct acpi_csrt_descriptor { > > * DBG2 - Debug Port Table 2 > > * Version 0 (Both main table and subtables) > > * > > - * Conforms to "Microsoft Debug Port Table 2 (DBG2)", December 10, > > 2015 > > + * Conforms to "Microsoft Debug Port Table 2 (DBG2)", September 21, > > + 2020 > > * > > > > ********************************************************************** > > ********/ > > > > @@ -532,11 +532,24 @@ struct acpi_dbg2_device { > > > > #define ACPI_DBG2_16550_COMPATIBLE 0x0000 > > #define ACPI_DBG2_16550_SUBSET 0x0001 > > +#define ACPI_DBG2_MAX311XE_SPI 0x0002 > > #define ACPI_DBG2_ARM_PL011 0x0003 > > +#define ACPI_DBG2_MSM8X60 0x0004 > > +#define ACPI_DBG2_16550_NVIDIA 0x0005 > > +#define ACPI_DBG2_TI_OMAP 0x0006 > > +#define ACPI_DBG2_APM88XXXX 0x0008 > > +#define ACPI_DBG2_MSM8974 0x0009 > > +#define ACPI_DBG2_SAM5250 0x000A > > +#define ACPI_DBG2_INTEL_USIF 0x000B > > +#define ACPI_DBG2_IMX6 0x000C > > #define ACPI_DBG2_ARM_SBSA_32BIT 0x000D > > #define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E > > #define ACPI_DBG2_ARM_DCC 0x000F > > #define ACPI_DBG2_BCM2835 0x0010 > > +#define ACPI_DBG2_SDM845_1_8432MHZ 0x0011 > > +#define ACPI_DBG2_16550_WITH_GAS 0x0012 > > +#define ACPI_DBG2_SDM845_7_372MHZ 0x0013 > > +#define ACPI_DBG2_INTEL_LPSS 0x0014 > > > > #define ACPI_DBG2_1394_STANDARD 0x0000 > > > > -- > > 2.29.0 > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes 2021-07-15 15:46 ` Marcin Wojtas @ 2021-07-16 14:08 ` Moore, Robert 0 siblings, 0 replies; 9+ messages in thread From: Moore, Robert @ 2021-07-16 14:08 UTC (permalink / raw) To: Marcin Wojtas Cc: linux-kernel, linux-acpi, devel, jaz, gjb, upstream, Samer.El-Haj-Mahmoud, jon, tn, rjw, lenb -----Original Message----- From: Marcin Wojtas <mw@semihalf.com> Sent: Thursday, July 15, 2021 8:47 AM To: Moore, Robert <robert.moore@intel.com> Cc: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; devel@acpica.org; jaz@semihalf.com; gjb@semihalf.com; upstream@semihalf.com; Samer.El-Haj-Mahmoud@arm.com; jon@solid-run.com; tn@semihalf.com; rjw@rjwysocki.net; lenb@kernel.org Subject: Re: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes czw., 15 lip 2021 o 17:44 Moore, Robert <robert.moore@intel.com> napisał(a): > > The patch was posted as a pull request on our github site. > I'm aware of that, semihalf-wojtas-marcin is me :) > The merged patch will be released as part of the normal ACPICA release process, which will then make it into Linux. You should then rebase. Ok, thanks for explanation. When approximately can this happen? About the end of the month Bob Best regards, Marcin > Bob > > > -----Original Message----- > From: Marcin Wojtas <mw@semihalf.com> > Sent: Thursday, July 15, 2021 7:17 AM > To: Moore, Robert <robert.moore@intel.com> > Cc: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; > devel@acpica.org; jaz@semihalf.com; gjb@semihalf.com; > upstream@semihalf.com; Samer.El-Haj-Mahmoud@arm.com; > jon@solid-run.com; tn@semihalf.com; rjw@rjwysocki.net; lenb@kernel.org > Subject: Re: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes > > Hi, > > > czw., 15 lip 2021 o 16:07 Moore, Robert <robert.moore@intel.com> napisał(a): > > > > This was already reported (with a patch that we've already merged) > > by semihalf-wojtas-marcin > > > > I'm not sure to be aware of the process. Reported where? > Are you planning to import the upstream patch on your own and I should rebase the SPCR driver change on top once it lands? > > Best regards, > Marcin > > > -----Original Message----- > > From: Marcin Wojtas <mw@semihalf.com> > > Sent: Wednesday, July 14, 2021 2:44 PM > > To: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; > > devel@acpica.org > > Cc: jaz@semihalf.com; gjb@semihalf.com; upstream@semihalf.com; > > Samer.El-Haj-Mahmoud@arm.com; jon@solid-run.com; tn@semihalf.com; > > rjw@rjwysocki.net; lenb@kernel.org; Moore, Robert > > <robert.moore@intel.com>; Marcin Wojtas <mw@semihalf.com> > > Subject: [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes > > > > ACPICA commit d95c7d206b5836c7770e8e9cd613859887fded8f > > > > The Microsoft Debug Port Table 2 (DBG2) specification revision September 21, 2020 comprises additional Serial Port Subtypes [1]. > > Reflect that in the actbl1.h header file. > > > > [1] > > https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/ac > > pi > > -debug-port-table > > > > Link: https://github.com/acpica/acpica/commit/d95c7d20 > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > --- > > include/acpi/actbl1.h | 15 ++++++++++++++- > > 1 file changed, 14 insertions(+), 1 deletion(-) > > > > diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index > > ef2872dea01c..7bbb3e2bd33f 100644 > > --- a/include/acpi/actbl1.h > > +++ b/include/acpi/actbl1.h > > @@ -482,7 +482,7 @@ struct acpi_csrt_descriptor { > > * DBG2 - Debug Port Table 2 > > * Version 0 (Both main table and subtables) > > * > > - * Conforms to "Microsoft Debug Port Table 2 (DBG2)", December 10, > > 2015 > > + * Conforms to "Microsoft Debug Port Table 2 (DBG2)", September 21, > > + 2020 > > * > > > > ******************************************************************** > > ** > > ********/ > > > > @@ -532,11 +532,24 @@ struct acpi_dbg2_device { > > > > #define ACPI_DBG2_16550_COMPATIBLE 0x0000 > > #define ACPI_DBG2_16550_SUBSET 0x0001 > > +#define ACPI_DBG2_MAX311XE_SPI 0x0002 > > #define ACPI_DBG2_ARM_PL011 0x0003 > > +#define ACPI_DBG2_MSM8X60 0x0004 > > +#define ACPI_DBG2_16550_NVIDIA 0x0005 > > +#define ACPI_DBG2_TI_OMAP 0x0006 > > +#define ACPI_DBG2_APM88XXXX 0x0008 > > +#define ACPI_DBG2_MSM8974 0x0009 > > +#define ACPI_DBG2_SAM5250 0x000A > > +#define ACPI_DBG2_INTEL_USIF 0x000B > > +#define ACPI_DBG2_IMX6 0x000C > > #define ACPI_DBG2_ARM_SBSA_32BIT 0x000D > > #define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E > > #define ACPI_DBG2_ARM_DCC 0x000F > > #define ACPI_DBG2_BCM2835 0x0010 > > +#define ACPI_DBG2_SDM845_1_8432MHZ 0x0011 > > +#define ACPI_DBG2_16550_WITH_GAS 0x0012 > > +#define ACPI_DBG2_SDM845_7_372MHZ 0x0013 > > +#define ACPI_DBG2_INTEL_LPSS 0x0014 > > > > #define ACPI_DBG2_1394_STANDARD 0x0000 > > > > -- > > 2.29.0 > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 2/2] ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype 2021-07-14 21:43 [PATCH 0/2] ACPI: Update DBG2 Serial Port Subtypes list Marcin Wojtas 2021-07-14 21:43 ` [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes Marcin Wojtas @ 2021-07-14 21:43 ` Marcin Wojtas 2021-08-16 16:39 ` Rafael J. Wysocki 1 sibling, 1 reply; 9+ messages in thread From: Marcin Wojtas @ 2021-07-14 21:43 UTC (permalink / raw) To: linux-kernel, linux-acpi, devel Cc: jaz, gjb, upstream, Samer.El-Haj-Mahmoud, jon, tn, rjw, lenb, robert.moore, Marcin Wojtas The Microsoft Debug Port Table 2 (DBG2) specification revision May 31, 2017 added definition of the 16550-compatible Serial Port Subtype with parameters defined in Generic Address Structure (GAS) [1] Add its support in the SPCR table parsing routine. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table Signed-off-by: Marcin Wojtas <mw@semihalf.com> --- drivers/acpi/spcr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c index 88460bacd5ae..25c2d0be953e 100644 --- a/drivers/acpi/spcr.c +++ b/drivers/acpi/spcr.c @@ -136,6 +136,7 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console) break; case ACPI_DBG2_16550_COMPATIBLE: case ACPI_DBG2_16550_SUBSET: + case ACPI_DBG2_16550_WITH_GAS: uart = "uart"; break; default: -- 2.29.0 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype 2021-07-14 21:43 ` [PATCH 2/2] ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype Marcin Wojtas @ 2021-08-16 16:39 ` Rafael J. Wysocki 0 siblings, 0 replies; 9+ messages in thread From: Rafael J. Wysocki @ 2021-08-16 16:39 UTC (permalink / raw) To: Marcin Wojtas Cc: Linux Kernel Mailing List, ACPI Devel Maling List, open list:ACPI COMPONENT ARCHITECTURE (ACPICA), Grzegorz Jaszczyk, Grzegorz Bernacki, upstream, Samer El-Haj-Mahmoud, Jon, Tomasz Nowicki, Rafael J. Wysocki, Len Brown, Robert Moore On Wed, Jul 14, 2021 at 11:46 PM Marcin Wojtas <mw@semihalf.com> wrote: > > The Microsoft Debug Port Table 2 (DBG2) specification revision > May 31, 2017 added definition of the 16550-compatible Serial Port > Subtype with parameters defined in Generic Address Structure (GAS) [1] > > Add its support in the SPCR table parsing routine. > > [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > --- > drivers/acpi/spcr.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c > index 88460bacd5ae..25c2d0be953e 100644 > --- a/drivers/acpi/spcr.c > +++ b/drivers/acpi/spcr.c > @@ -136,6 +136,7 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console) > break; > case ACPI_DBG2_16550_COMPATIBLE: > case ACPI_DBG2_16550_SUBSET: > + case ACPI_DBG2_16550_WITH_GAS: > uart = "uart"; > break; > default: > -- Applied as 5.15 material, thanks! ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-08-16 16:39 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-07-14 21:43 [PATCH 0/2] ACPI: Update DBG2 Serial Port Subtypes list Marcin Wojtas 2021-07-14 21:43 ` [PATCH 1/2] ACPICA: Add new DBG2 Serial Port Subtypes Marcin Wojtas 2021-07-15 14:07 ` Moore, Robert 2021-07-15 14:17 ` Marcin Wojtas 2021-07-15 15:44 ` Moore, Robert 2021-07-15 15:46 ` Marcin Wojtas 2021-07-16 14:08 ` Moore, Robert 2021-07-14 21:43 ` [PATCH 2/2] ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype Marcin Wojtas 2021-08-16 16:39 ` Rafael J. Wysocki
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).