From: "Rafael J. Wysocki" <firstname.lastname@example.org> To: Kristian Klausen <email@example.com> Cc: "Rafael J. Wysocki" <firstname.lastname@example.org>, Linux ACPI <email@example.com>, Linux PM <firstname.lastname@example.org>, LKML <email@example.com>, Zhang Rui <firstname.lastname@example.org>, Rajneesh Bhardwaj <email@example.com>, Andy Shevchenko <firstname.lastname@example.org>, Mario Limonciello <email@example.com>, Kai-Heng Feng <firstname.lastname@example.org> Subject: Re: [PATCH v3 0/8] PM / ACPI: sleep: Additional changes related to suspend-to-idle Date: Mon, 19 Aug 2019 22:41:09 +0200 [thread overview] Message-ID: <CAJZ5v0gw1Dw8FUgKmkeq5TCa=OqvFUVTq6aHgFw-D9O4YiiCKw@mail.gmail.com> (raw) In-Reply-To: <email@example.com> On Mon, Aug 19, 2019 at 5:47 PM Kristian Klausen <firstname.lastname@example.org> wrote: > > On 19.08.2019 11.05, Rafael J. Wysocki wrote: > > On Monday, August 19, 2019 9:59:02 AM CEST Rafael J. Wysocki wrote: > >> On Fri, Aug 16, 2019 at 10:26 PM Kristian Klausen <email@example.com> wrote: > >>> On 02.08.2019 12.33, Rafael J. Wysocki wrote: > >>>> Hi All, > >>>> > >>>>>> On top of the "Simplify the suspend-to-idle control flow" patch series > >>>>>> posted previously: > >>>>>> > >>>>>> https://lore.kernel.org/lkml/71085220.z6FKkvYQPX@kreacher/ > >>>>>> > >>>>>> sanitize the suspend-to-idle flow even further. > >>>>>> > >>>>>> First off, decouple EC wakeup from the LPS0 _DSM processing (patch 1). > >>>>>> > >>>>>> Next, reorder the code to invoke LPS0 _DSM Functions 5 and 6 in the > >>>>>> specification-compliant order with respect to suspending and resuming > >>>>>> devices (patch 2). > >>>>>> > >>>>>> Finally, rearrange lps0_device_attach() (patch 3) and add a command line > >>>>>> switch to prevent the LPS0 _DSM from being used. > >>>>> The v2 is because I found a (minor) bug in patch 1, decided to use a module > >>>>> parameter instead of a kernel command line option in patch 4. Also, there > >>>>> are 4 new patches: > >>>>> > >>>>> Patch 5: Switch the EC over to polling during "noirq" suspend and back > >>>>> during "noirq" resume. > >>>>> > >>>>> Patch 6: Eliminate acpi_sleep_no_ec_events(). > >>>>> > >>>>> Patch 7: Consolidate some EC code depending on PM_SLEEP. > >>>>> > >>>>> Patch 8: Add EC GPE dispatching debug message. > >>>> The v3 is just a rearranged v2 so as to move the post sensitive patch (previous patch 2) > >>>> to the end of the series. [After applying the full series the code is the same as before.] > >>>> > >>>> For easier testing, the series (along with some previous patches depended on by it) > >>>> is available in the pm-s2idle-testing branch of the linux-pm.git tree at kernel.org: > >>>> > >>>> https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/log/?h=pm-s2idle-testing > >>> It was just testing this patch series(461fc1caed55), to see if it would > >>> fix my charging issue > >>> (https://bugzilla.kernel.org/show_bug.cgi?id=201307), which it didn't. > >> It is unlikely to help in that case. > Do you have any idea what the issue could be? Basically, there are two possibilities: either the OS is expected to handle the AC/battery switching events, or the platform firmware should take care of them. In the former case, the EC should generate events to be handled by the OS and in the latter one there needs to be a way to let the platform firmware that it needs to take care of those events going forward. In either case there may be a platform-specific action to be carried out during suspend and resume to set this up as expected which may be missing. > >> > >>> I did however notice that my laptop (ASUS Zenbook UX430UNR/i7-8550U) > >>> won't wake when opening the lid or pressing a key, the only way to wake > >>> the laptop is pressing the power button. > >>> > >>> I also tested mainline (5.3.0-rc4 b7e7c85dc7b0) and 5.2.8 and the laptop > >>> wakes without issue when the lid is opened or a key is presed. > >>>> Please refer to the changelogs for details. > >> Thanks for your report. > >> > >> I seem to see a similar issue with respect to the lid on one of my > >> test machines, looking into it right now. > > Well, my lid issue seems to be unrelated as it doesn't result from any patches in the > > series in question. > > > > First off, please clone 5.3-rc5 from kernel.org and double check if the issue is not > > present in that one. > > > > If that's not the case, merge the pm-s2idle-rework branch from my tree on top of it > > and retest. > > > > If you still see the issue then, apply the appended patch (on top of the pm-s2idle-reqork > > branch ) and, after starting the kernel, do > > > > # echo 1 > /sys/power/pm_debug_messages > > > > suspend the system and try to wake it up through all of the ways that stopped working. > > > > Then, wake it up with the power button, save the output of dmesg and send it to me. > > > > Thanks! > > With 5.3-rc5 the laptops wakes up without any issue when pressing a key > or opening the lid. > With v5.3-rc5+pm-s2idle-testing I can only wake the laptop by pressing > the power button. OK, thanks for verifying. So it is unclear to me how the series can cause an issue like that to appear. > dmesg with pm_debug_messages=1 and your patch: > [ 55.646109] PM: suspend entry (s2idle) > [ 55.698559] Filesystems sync: 0.052 seconds > [ 55.698561] PM: Preparing system for sleep (s2idle) > [ 55.700661] Freezing user space processes ... (elapsed 0.210 seconds) > done. > [ 55.911494] OOM killer disabled. > [ 55.911495] Freezing remaining freezable tasks ... (elapsed 0.001 > seconds) done. > [ 55.913192] PM: Suspending system (s2idle) > [ 55.913195] printk: Suspending console(s) (use no_console_suspend to > debug) > [ 55.914778] [drm] CT: disabled > [ 55.916057] wlan0: deauthenticating from 64:70:02:a5:fd:02 by local > choice (Reason: 3=DEAUTH_LEAVING) > [ 56.045634] sd 2:0:0:0: [sda] Synchronizing SCSI cache > [ 56.046650] sd 2:0:0:0: [sda] Stopping disk > [ 56.287622] PM: suspend of devices complete after 371.285 msecs > [ 56.287627] PM: start suspend of devices complete after 373.684 msecs > [ 56.307155] PM: late suspend of devices complete after 19.477 msecs > [ 56.312479] ACPI: EC: interrupt blocked > [ 56.352761] PM: noirq suspend of devices complete after 45.205 msecs > [ 56.352770] ACPI: \_PR_.PR00: LPI: Device not power manageable > [ 56.352774] ACPI: \_PR_.PR01: LPI: Device not power manageable > [ 56.352776] ACPI: \_PR_.PR02: LPI: Device not power manageable > [ 56.352779] ACPI: \_PR_.PR03: LPI: Device not power manageable > [ 56.352782] ACPI: \_PR_.PR04: LPI: Device not power manageable > [ 56.352785] ACPI: \_PR_.PR05: LPI: Device not power manageable > [ 56.352788] ACPI: \_PR_.PR06: LPI: Device not power manageable > [ 56.352790] ACPI: \_PR_.PR07: LPI: Device not power manageable > [ 56.352793] ACPI: \_SB_.PCI0.GFX0: LPI: Device not power manageable > [ 56.352800] ACPI: \_SB_.PCI0.RP06.PXSX: LPI: Device not power manageable > [ 56.357057] PM: suspend-to-idle > [ 69.338656] PM: Timekeeping suspended for 12.178 seconds > [ 69.338701] PM: irq_pm_check_wakeup: IRQ 9 > [ 69.338704] PM: IRQ wakeup: IRQ 9 This clearly is the power button event causing the system to wake up. The other actions, whatever they were, didn't cause any interrupts to be triggered. I suspect that the issue is related to the EC, so please try to revert commit fcd0a04267ac ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend and see if that makes any difference (should revert cleanly). If that doesn't make any difference, please also try to revert commits (on top of the above revert) 11f26633cccb PM: suspend: Fix platform_suspend_prepare_noirq() ac9eafbe930a ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices (in this order) and retest.
next prev parent reply other threads:[~2019-08-19 20:41 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-02 10:33 Rafael J. Wysocki 2019-08-02 10:38 ` [PATCH v3 1/8] ACPI: PM: Set up EC GPE for system wakeup from drivers that need it Rafael J. Wysocki 2019-08-02 10:38 ` [PATCH v3 2/8] ACPI: PM: s2idle: Rearrange lps0_device_attach() Rafael J. Wysocki 2019-08-02 10:38 ` [PATCH v3 3/8] ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter Rafael J. Wysocki 2019-08-02 10:40 ` [PATCH v3 4/8] ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend Rafael J. Wysocki 2019-08-02 10:41 ` [PATCH v3 5/8] ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events() Rafael J. Wysocki 2019-08-02 10:43 ` [PATCH v3 6/8] ACPI: EC: PM: Consolidate some code depending on PM_SLEEP Rafael J. Wysocki 2019-08-02 10:44 ` [PATCH v3 7/8] ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message Rafael J. Wysocki 2019-08-02 10:45 ` [PATCH v3 8/8] ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices Rafael J. Wysocki [not found] ` <CGME20190809120052eucas1p11b56806662ef4f4efb82a152ad651481@eucas1p1.samsung.com> 2019-08-09 12:00 ` Marek Szyprowski 2019-08-09 12:15 ` Rafael J. Wysocki 2019-08-10 11:24 ` [PATCH] PM: suspend: Fix platform_suspend_prepare_noirq() Rafael J. Wysocki 2019-08-05 16:25 ` [PATCH v3 0/8] PM / ACPI: sleep: Additional changes related to suspend-to-idle Kai-Heng Feng 2019-08-12 13:55 ` Bhardwaj, Rajneesh 2019-08-12 21:32 ` Rafael J. Wysocki 2019-08-16 20:20 ` Kristian Klausen 2019-08-19 7:59 ` Rafael J. Wysocki 2019-08-19 9:05 ` Rafael J. Wysocki 2019-08-19 15:45 ` Kristian Klausen 2019-08-19 20:41 ` Rafael J. Wysocki [this message] 2019-08-20 13:10 ` Kristian Klausen 2019-08-20 13:29 ` Rafael J. Wysocki 2019-08-20 21:38 ` Rafael J. Wysocki 2019-08-20 22:47 ` Kristian Klausen 2019-08-21 7:30 ` Rafael J. Wysocki
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CAJZ5v0gw1Dw8FUgKmkeq5TCa=OqvFUVTq6aHgFw-D9O4YiiCKw@mail.gmail.com' \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --subject='Re: [PATCH v3 0/8] PM / ACPI: sleep: Additional changes related to suspend-to-idle' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).