[PATCH 1/2] x86/boot/build: make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage

[PATCH 1/2] x86/boot/build: make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage

[Masahiro Yamada]

bzlilo is an installation target because it copies files to
$(INSTALL_PATH)/, then runs 'lilo'.

However, arch/x86/Makefile and arch/x86/boot/Makefile have it depend on
vmlinux, $(obj)/bzImage, respectively.

'make bzlilo' may update some build artifacts in the source tree.

As commit 19514fc665ff ("arm, kbuild: make "make install" not depend
on vmlinux") explained, it should not happen.

Make 'bzlilo' not depend on any build artifact.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 arch/x86/Makefile      | 6 +++---
 arch/x86/boot/Makefile | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 94df0868804b..a034d7787b7e 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -267,7 +267,7 @@ drivers-$(CONFIG_FB) += arch/x86/video/
 
 boot := arch/x86/boot
 
-BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
+BOOT_TARGETS = bzdisk fdimage fdimage144 fdimage288 isoimage
 
 PHONY += bzImage $(BOOT_TARGETS)
 
@@ -288,8 +288,8 @@ endif
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
-PHONY += install
-install:
+PHONY += install bzlilo
+install bzlilo:
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
 PHONY += vdso_install
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 050164ba3def..1b37746aab82 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -144,7 +144,7 @@ isoimage: $(obj)/bzImage
 	$(call cmd,genimage,isoimage,$(obj)/image.iso)
 	@$(kecho) 'Kernel: $(obj)/image.iso is ready'
 
-bzlilo: $(obj)/bzImage
+bzlilo:
 	if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
 	if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
 	cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz
-- 
2.17.1

[PATCH 2/2] x86/boot/build: add phony targets in arch/x86/boot/Makefile to PHONY

[Masahiro Yamada]

These targets are correctly added to PHONY in arch/x86/Makefile, but
you need do so in arch/x86/boot/Makefile, too.

Otherwise, if you have a file 'install' in the top directory,
'make install' does nothing.

  $ touch install
  $ make install
  make[1]: 'install' is up to date.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 arch/x86/boot/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 1b37746aab82..fc889bcfc2f8 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -127,6 +127,8 @@ quiet_cmd_genimage = GENIMAGE $3
 cmd_genimage = sh $(srctree)/$(src)/genimage.sh $2 $3 $(obj)/bzImage \
 			$(obj)/mtools.conf '$(image_cmdline)' $(FDINITRD)
 
+PHONY += bzdisk fdimage fdimage144 fdimage288 isoimage bzlilo install
+
 # This requires write access to /dev/fd0
 bzdisk: $(obj)/bzImage $(obj)/mtools.conf
 	$(call cmd,genimage,bzdisk,/dev/fd0)
-- 
2.17.1

[tip: x86/build] x86/boot/build: Add phony targets in arch/x86/boot/Makefile to PHONY

[tip-bot2 for Masahiro Yamada]

The following commit has been merged into the x86/build branch of tip:

Commit-ID:     675a59b7dec6e03c5fb060f18fc25b2e56be3c7a
Gitweb:        https://git.kernel.org/tip/675a59b7dec6e03c5fb060f18fc25b2e56be3c7a
Author:        Masahiro Yamada <masahiroy@kernel.org>
AuthorDate:    Sat, 15 Feb 2020 15:38:52 +09:00
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Tue, 21 Apr 2020 18:30:58 +02:00

x86/boot/build: Add phony targets in arch/x86/boot/Makefile to PHONY

These targets are correctly added to PHONY in arch/x86/Makefile, but
not in arch/x86/boot/Makefile. Thus, with a file 'install' in the top
directory, 'make install' does nothing:

  $ touch install
  $ make install
  make[1]: 'install' is up to date.

Add them to the PHONY targets in the boot Makefile too.

 [ bp: Massage. ]

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200215063852.8298-2-masahiroy@kernel.org
---
 arch/x86/boot/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index f1bf4a7..4c53556 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -128,6 +128,8 @@ quiet_cmd_genimage = GENIMAGE $3
 cmd_genimage = sh $(srctree)/$(src)/genimage.sh $2 $3 $(obj)/bzImage \
 			$(obj)/mtools.conf '$(image_cmdline)' $(FDINITRD)
 
+PHONY += bzdisk fdimage fdimage144 fdimage288 isoimage bzlilo install
+
 # This requires write access to /dev/fd0
 bzdisk: $(obj)/bzImage $(obj)/mtools.conf
 	$(call cmd,genimage,bzdisk,/dev/fd0)

Re: [PATCH 1/2] x86/boot/build: make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage

[Masahiro Yamada]

Hi

On Sat, Feb 15, 2020 at 3:39 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> bzlilo is an installation target because it copies files to
> $(INSTALL_PATH)/, then runs 'lilo'.
>
> However, arch/x86/Makefile and arch/x86/boot/Makefile have it depend on
> vmlinux, $(obj)/bzImage, respectively.
>
> 'make bzlilo' may update some build artifacts in the source tree.
>
> As commit 19514fc665ff ("arm, kbuild: make "make install" not depend
> on vmlinux") explained, it should not happen.
>
> Make 'bzlilo' not depend on any build artifact.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>


Ping.
Can you pick up this series?

Thanks.


> ---
>
>  arch/x86/Makefile      | 6 +++---
>  arch/x86/boot/Makefile | 2 +-
>  2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/x86/Makefile b/arch/x86/Makefile
> index 94df0868804b..a034d7787b7e 100644
> --- a/arch/x86/Makefile
> +++ b/arch/x86/Makefile
> @@ -267,7 +267,7 @@ drivers-$(CONFIG_FB) += arch/x86/video/
>
>  boot := arch/x86/boot
>
> -BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
> +BOOT_TARGETS = bzdisk fdimage fdimage144 fdimage288 isoimage
>
>  PHONY += bzImage $(BOOT_TARGETS)
>
> @@ -288,8 +288,8 @@ endif
>  $(BOOT_TARGETS): vmlinux
>         $(Q)$(MAKE) $(build)=$(boot) $@
>
> -PHONY += install
> -install:
> +PHONY += install bzlilo
> +install bzlilo:
>         $(Q)$(MAKE) $(build)=$(boot) $@
>
>  PHONY += vdso_install
> diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
> index 050164ba3def..1b37746aab82 100644
> --- a/arch/x86/boot/Makefile
> +++ b/arch/x86/boot/Makefile
> @@ -144,7 +144,7 @@ isoimage: $(obj)/bzImage
>         $(call cmd,genimage,isoimage,$(obj)/image.iso)
>         @$(kecho) 'Kernel: $(obj)/image.iso is ready'
>
> -bzlilo: $(obj)/bzImage
> +bzlilo:
>         if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
>         if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
>         cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz
> --
> 2.17.1
>


-- 
Best Regards
Masahiro Yamada

[tip: x86/build] x86/boot/build: Make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage

[tip-bot2 for Masahiro Yamada]

The following commit has been merged into the x86/build branch of tip:

Commit-ID:     30ce434e44d7e142e7a36c6b3eb2545adf692c67
Gitweb:        https://git.kernel.org/tip/30ce434e44d7e142e7a36c6b3eb2545adf692c67
Author:        Masahiro Yamada <masahiroy@kernel.org>
AuthorDate:    Sat, 15 Feb 2020 15:38:51 +09:00
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Tue, 21 Apr 2020 18:10:28 +02:00

x86/boot/build: Make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage

bzlilo is an installation target because it copies files to
$(INSTALL_PATH)/, then runs 'lilo'. However, arch/x86/Makefile and
arch/x86/boot/Makefile have it depend on vmlinux and $(obj)/bzImage,
respectively.

'make bzlilo' may update some build artifacts in the source tree.

As commit

  19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux")

explained, this should not happen.

Make 'bzlilo' not depend on any build artifact.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200215063852.8298-1-masahiroy@kernel.org
---
 arch/x86/Makefile      | 6 +++---
 arch/x86/boot/Makefile | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index b65ec63..00e378d 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -246,7 +246,7 @@ drivers-$(CONFIG_FB) += arch/x86/video/
 
 boot := arch/x86/boot
 
-BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
+BOOT_TARGETS = bzdisk fdimage fdimage144 fdimage288 isoimage
 
 PHONY += bzImage $(BOOT_TARGETS)
 
@@ -267,8 +267,8 @@ endif
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
-PHONY += install
-install:
+PHONY += install bzlilo
+install bzlilo:
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
 PHONY += vdso_install
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 02c8d1c..f1bf4a7 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -145,7 +145,7 @@ isoimage: $(obj)/bzImage
 	$(call cmd,genimage,isoimage,$(obj)/image.iso)
 	@$(kecho) 'Kernel: $(obj)/image.iso is ready'
 
-bzlilo: $(obj)/bzImage
+bzlilo:
 	if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
 	if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
 	cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz