[PATCHv2 00/11] Nokia H4+ support

[PATCHv2 00/11] Nokia H4+ support

[Sebastian Reichel]

Hi,

This is the second revision from the Nokia H4+ bluetooth patchset. I fixed all
comments I received and verified that scanning for bluetooth devices still
works on N950.

The patchset is based upon 4.11-rc1 and is also available from
the following branch:

https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-n900.git nokia-bt-serdev-v2

-- Sebastian

Rob Herring (1):
  Bluetooth: hci_uart: add serdev driver support library

Sebastian Reichel (10):
  Bluetooth: hci_uart: add support for word alignment
  Bluetooth: hci_serdev: do not open device in hci open
  tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init
  serdev: add serdev_device_wait_until_sent
  serdev: implement get/set tiocm
  serdev: add helpers for cts and rts handling
  dt-bindings: net: bluetooth: Add nokia-bluetooth
  Bluetooth: add nokia driver
  ARM: dts: N900: Add bluetooth
  ARM: dts: N9/N950: add bluetooth

 .../devicetree/bindings/net/nokia-bluetooth.txt    |  51 ++
 arch/arm/boot/dts/omap3-n900.dts                   |  23 +-
 arch/arm/boot/dts/omap3-n950-n9.dtsi               |  32 +
 drivers/bluetooth/Kconfig                          |  12 +
 drivers/bluetooth/Makefile                         |   3 +
 drivers/bluetooth/hci_h4.c                         |  17 +
 drivers/bluetooth/hci_ldisc.c                      |   4 +
 drivers/bluetooth/hci_nokia.c                      | 819 +++++++++++++++++++++
 drivers/bluetooth/hci_serdev.c                     | 355 +++++++++
 drivers/bluetooth/hci_uart.h                       |   7 +
 drivers/tty/serdev/core.c                          |  33 +
 drivers/tty/serdev/serdev-ttyport.c                |  39 +-
 drivers/tty/serial/omap-serial.c                   |   3 +
 include/linux/serdev.h                             |  47 ++
 14 files changed, 1442 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/nokia-bluetooth.txt
 create mode 100644 drivers/bluetooth/hci_nokia.c
 create mode 100644 drivers/bluetooth/hci_serdev.c

-- 
2.11.0

[PATCHv2 01/11] Bluetooth: hci_uart: add support for word alignment

[Sebastian Reichel]

This will be used by Nokia's H4+ protocol, which
uses 2-byte aligned packets.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
Changes since PATCHv1:
 * use u8 instead of uint8_t
---
 drivers/bluetooth/hci_h4.c    | 17 +++++++++++++++++
 drivers/bluetooth/hci_ldisc.c |  4 ++++
 drivers/bluetooth/hci_uart.h  |  3 +++
 3 files changed, 24 insertions(+)

diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index 635597b6e168..82e5a32b87a4 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -171,9 +171,20 @@ struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
 			    const unsigned char *buffer, int count,
 			    const struct h4_recv_pkt *pkts, int pkts_count)
 {
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	u8 alignment = hu->alignment;
+
 	while (count) {
 		int i, len;
 
+		/* remove padding bytes from buffer */
+		for (; hu->padding && count > 0; hu->padding--) {
+			count--;
+			buffer++;
+		}
+		if (!count)
+			break;
+
 		if (!skb) {
 			for (i = 0; i < pkts_count; i++) {
 				if (buffer[0] != (&pkts[i])->type)
@@ -253,11 +264,17 @@ struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
 			}
 
 			if (!dlen) {
+				hu->padding = (skb->len - 1) % alignment;
+				hu->padding = (alignment - hu->padding) % alignment;
+
 				/* No more data, complete frame */
 				(&pkts[i])->recv(hdev, skb);
 				skb = NULL;
 			}
 		} else {
+			hu->padding = (skb->len - 1) % alignment;
+			hu->padding = (alignment - hu->padding) % alignment;
+
 			/* Complete frame */
 			(&pkts[i])->recv(hdev, skb);
 			skb = NULL;
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 9497c469efd2..0ec8a94bd712 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -459,6 +459,10 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	hu->tty = tty;
 	tty->receive_room = 65536;
 
+	/* disable alignment support by default */
+	hu->alignment = 1;
+	hu->padding = 0;
+
 	INIT_WORK(&hu->init_ready, hci_uart_init_work);
 	INIT_WORK(&hu->write_work, hci_uart_write_work);
 
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 070139513e65..4aff50960cac 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -92,6 +92,9 @@ struct hci_uart {
 
 	unsigned int init_speed;
 	unsigned int oper_speed;
+
+	u8			alignment;
+	u8			padding;
 };
 
 /* HCI_UART proto flag bits */
-- 
2.11.0

[PATCHv2 02/11] Bluetooth: hci_uart: add serdev driver support library

[Sebastian Reichel]

From: Rob Herring <robh@kernel.org>

This adds library functions for serdev based BT drivers. This is largely
copied from hci_ldisc.c and modified to use serdev calls. There's a little
bit of duplication, but I avoided intermixing this as the ldisc code should
eventually go away.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
[Fix style issues reported by Pavel]
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
Changes since PATCHv1:
 * Drop FSF address from license section
 * Add error message if hu->proto->set_baudrate fails
 * Remove useless label/goto in hci_uart_setup
 * Use proper kerneldoc for hci_uart_write_wakeup
 * Use proper kerneldoc for hci_uart_receive_buf
 * Wrap hci_uart_register_device define to get < 80 chars
 * Use do..while instead of goto restart in hci_uart_write_work
 * The file checkpatch clean now
---
 drivers/bluetooth/Makefile     |   1 +
 drivers/bluetooth/hci_serdev.c | 361 +++++++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/hci_uart.h   |   4 +
 3 files changed, 366 insertions(+)
 create mode 100644 drivers/bluetooth/hci_serdev.c

diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 80627187c8b6..fd571689eed6 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -29,6 +29,7 @@ btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
 
 hci_uart-y				:= hci_ldisc.o
+hci_uart-$(CONFIG_SERIAL_DEV_BUS)	+= hci_serdev.o
 hci_uart-$(CONFIG_BT_HCIUART_H4)	+= hci_h4.o
 hci_uart-$(CONFIG_BT_HCIUART_BCSP)	+= hci_bcsp.o
 hci_uart-$(CONFIG_BT_HCIUART_LL)	+= hci_ll.o
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
new file mode 100644
index 000000000000..f5ccb2c7ef92
--- /dev/null
+++ b/drivers/bluetooth/hci_serdev.c
@@ -0,0 +1,361 @@
+/*
+ *  Bluetooth HCI serdev driver lib
+ *
+ *  Copyright (C) 2017  Linaro, Ltd., Rob Herring <robh@kernel.org>
+ *
+ *  Based on hci_ldisc.c:
+ *
+ *  Copyright (C) 2000-2001  Qualcomm Incorporated
+ *  Copyright (C) 2002-2003  Maxim Krasnyansky <maxk@qualcomm.com>
+ *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/serdev.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+struct serdev_device_ops hci_serdev_client_ops;
+
+static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
+{
+	struct hci_dev *hdev = hu->hdev;
+
+	/* Update HCI stat counters */
+	switch (pkt_type) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+}
+
+static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
+{
+	struct sk_buff *skb = hu->tx_skb;
+
+	if (!skb)
+		skb = hu->proto->dequeue(hu);
+	else
+		hu->tx_skb = NULL;
+
+	return skb;
+}
+
+static void hci_uart_write_work(struct work_struct *work)
+{
+	struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
+	struct serdev_device *serdev = hu->serdev;
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+
+	/* REVISIT:
+	 * should we cope with bad skbs or ->write() returning an error value?
+	 */
+	do {
+		clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
+
+		while ((skb = hci_uart_dequeue(hu))) {
+			int len;
+
+			len = serdev_device_write_buf(serdev,
+						      skb->data, skb->len);
+			hdev->stat.byte_tx += len;
+
+			skb_pull(skb, len);
+			if (skb->len) {
+				hu->tx_skb = skb;
+				break;
+			}
+
+			hci_uart_tx_complete(hu, hci_skb_pkt_type(skb));
+			kfree_skb(skb);
+		}
+	} while(test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state));
+
+	clear_bit(HCI_UART_SENDING, &hu->tx_state);
+}
+
+/* ------- Interface to HCI layer ------ */
+
+/* Initialize device */
+static int hci_uart_open(struct hci_dev *hdev)
+{
+	struct hci_uart *hu  = hci_get_drvdata(hdev);
+
+	BT_DBG("%s %p", hdev->name, hdev);
+
+	serdev_device_set_client_ops(hu->serdev, &hci_serdev_client_ops);
+
+	return serdev_device_open(hu->serdev);
+}
+
+/* Reset device */
+static int hci_uart_flush(struct hci_dev *hdev)
+{
+	struct hci_uart *hu  = hci_get_drvdata(hdev);
+
+	BT_DBG("hdev %p serdev %p", hdev, hu->serdev);
+
+	if (hu->tx_skb) {
+		kfree_skb(hu->tx_skb); hu->tx_skb = NULL;
+	}
+
+	/* Flush any pending characters in the driver and discipline. */
+	serdev_device_write_flush(hu->serdev);
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		hu->proto->flush(hu);
+
+	return 0;
+}
+
+/* Close device */
+static int hci_uart_close(struct hci_dev *hdev)
+{
+	struct hci_uart *hu  = hci_get_drvdata(hdev);
+
+	BT_DBG("hdev %p", hdev);
+
+	hci_uart_flush(hdev);
+	hdev->flush = NULL;
+
+	serdev_device_close(hu->serdev);
+
+	return 0;
+}
+
+/* Send frames from HCI layer */
+static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb),
+	       skb->len);
+
+	hu->proto->enqueue(hu, skb);
+
+	hci_uart_tx_wakeup(hu);
+
+	return 0;
+}
+
+static int hci_uart_setup(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct hci_rp_read_local_version *ver;
+	struct sk_buff *skb;
+	unsigned int speed;
+	int err;
+
+	/* Init speed if any */
+	if (hu->init_speed)
+		speed = hu->init_speed;
+	else if (hu->proto->init_speed)
+		speed = hu->proto->init_speed;
+	else
+		speed = 0;
+
+	if (speed)
+		serdev_device_set_baudrate(hu->serdev, speed);
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (hu->proto->set_baudrate && speed) {
+		err = hu->proto->set_baudrate(hu, speed);
+		if (err)
+			BT_ERR("%s: failed to set baudrate", hdev->name);
+		else
+			serdev_device_set_baudrate(hu->serdev, speed);
+	}
+
+	if (hu->proto->setup)
+		return hu->proto->setup(hu);
+
+	if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags))
+		return 0;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Reading local version information failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return 0;
+	}
+
+	if (skb->len != sizeof(*ver)) {
+		BT_ERR("%s: Event length mismatch for version information",
+		       hdev->name);
+	}
+
+	kfree_skb(skb);
+	return 0;
+}
+
+/** hci_uart_write_wakeup - transmit buffer wakeup
+ * @serdev: serial device
+ *
+ * This function is called by the serdev framework when it accepts
+ * more data being sent.
+ */
+static void hci_uart_write_wakeup(struct serdev_device *serdev)
+{
+	struct hci_uart *hu = serdev_device_get_drvdata(serdev);
+
+	BT_DBG("");
+
+	if (!hu || serdev != hu->serdev) {
+		WARN_ON(1);
+		return;
+	}
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		hci_uart_tx_wakeup(hu);
+}
+
+/** hci_uart_receive_buf - receive buffer wakeup
+ * @serdev: serial device
+ * @data:   pointer to received data
+ * @count:  count of received data in bytes
+ *
+ * This function is called by the serdev framework when it received data
+ * in the RX buffer.
+ *
+ * Return: number of processed bytes
+ */
+static int hci_uart_receive_buf(struct serdev_device *serdev, const u8 *data,
+				   size_t count)
+{
+	struct hci_uart *hu = serdev_device_get_drvdata(serdev);
+
+	if (!hu || serdev != hu->serdev) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		return 0;
+
+	/* It does not need a lock here as it is already protected by a mutex in
+	 * tty caller
+	 */
+	hu->proto->recv(hu, data, count);
+
+	if (hu->hdev)
+		hu->hdev->stat.byte_rx += count;
+
+	return count;
+}
+
+struct serdev_device_ops hci_serdev_client_ops = {
+	.receive_buf = hci_uart_receive_buf,
+	.write_wakeup = hci_uart_write_wakeup,
+};
+
+int hci_uart_register_device(struct hci_uart *hu,
+			     const struct hci_uart_proto *p)
+{
+	int err;
+	struct hci_dev *hdev;
+
+	BT_DBG("");
+
+	err = p->open(hu);
+	if (err)
+		return err;
+
+	hu->proto = p;
+	set_bit(HCI_UART_PROTO_READY, &hu->flags);
+
+	/* Initialize and register HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		err = -ENOMEM;
+		goto err_alloc;
+	}
+
+	hu->hdev = hdev;
+
+	hdev->bus = HCI_UART;
+	hci_set_drvdata(hdev, hu);
+
+	INIT_WORK(&hu->write_work, hci_uart_write_work);
+
+	/* Only when vendor specific setup callback is provided, consider
+	 * the manufacturer information valid. This avoids filling in the
+	 * value for Ericsson when nothing is specified.
+	 */
+	if (hu->proto->setup)
+		hdev->manufacturer = hu->proto->manufacturer;
+
+	hdev->open  = hci_uart_open;
+	hdev->close = hci_uart_close;
+	hdev->flush = hci_uart_flush;
+	hdev->send  = hci_uart_send_frame;
+	hdev->setup = hci_uart_setup;
+	SET_HCIDEV_DEV(hdev, &hu->serdev->dev);
+
+	if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+	if (test_bit(HCI_UART_EXT_CONFIG, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks);
+
+	if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+	if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
+		hdev->dev_type = HCI_AMP;
+	else
+		hdev->dev_type = HCI_PRIMARY;
+
+	if (test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
+		return 0;
+
+	if (hci_register_dev(hdev) < 0) {
+		BT_ERR("Can't register HCI device");
+		err = -ENODEV;
+		goto err_register;
+	}
+
+	set_bit(HCI_UART_REGISTERED, &hu->flags);
+
+	return 0;
+
+err_register:
+	hci_free_dev(hdev);
+err_alloc:
+	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+	p->close(hu);
+	return err;
+}
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 4aff50960cac..1b41c661bbb8 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -58,6 +58,7 @@
 #define HCI_UART_VND_DETECT	5
 
 struct hci_uart;
+struct serdev_device;
 
 struct hci_uart_proto {
 	unsigned int id;
@@ -77,6 +78,7 @@ struct hci_uart_proto {
 
 struct hci_uart {
 	struct tty_struct	*tty;
+	struct serdev_device	*serdev;
 	struct hci_dev		*hdev;
 	unsigned long		flags;
 	unsigned long		hdev_flags;
@@ -108,6 +110,8 @@ struct hci_uart {
 
 int hci_uart_register_proto(const struct hci_uart_proto *p);
 int hci_uart_unregister_proto(const struct hci_uart_proto *p);
+int hci_uart_register_device(struct hci_uart *hu, const struct hci_uart_proto *p);
+
 int hci_uart_tx_wakeup(struct hci_uart *hu);
 int hci_uart_init_ready(struct hci_uart *hu);
 void hci_uart_init_tty(struct hci_uart *hu);
-- 
2.11.0

Re: [PATCHv2 02/11] Bluetooth: hci_uart: add serdev driver support library

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 856 bytes --]

On Tue 2017-03-21 23:32:07, Sebastian Reichel wrote:
> From: Rob Herring <robh@kernel.org>
> 
> This adds library functions for serdev based BT drivers. This is largely
> copied from hci_ldisc.c and modified to use serdev calls. There's a little
> bit of duplication, but I avoided intermixing this as the ldisc code should
> eventually go away.
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Marcel Holtmann <marcel@holtmann.org>
> Cc: Gustavo Padovan <gustavo@padovan.org>
> Cc: Johan Hedberg <johan.hedberg@gmail.com>
> Cc: linux-bluetooth@vger.kernel.org
> [Fix style issues reported by Pavel]
> Signed-off-by: Sebastian Reichel <sre@kernel.org>

Acked-by: Pavel Machek <pavel@ucw.cz>

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

[PATCHv2 03/11] Bluetooth: hci_serdev: do not open device in hci open

[Sebastian Reichel]

The device driver may need to communicate with the UART
device while the Bluetooth device is closed (e.g. due
to interrupts).

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 drivers/bluetooth/hci_serdev.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index f5ccb2c7ef92..3b8ac0ece3fb 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -104,13 +104,9 @@ static void hci_uart_write_work(struct work_struct *work)
 /* Initialize device */
 static int hci_uart_open(struct hci_dev *hdev)
 {
-	struct hci_uart *hu  = hci_get_drvdata(hdev);
-
 	BT_DBG("%s %p", hdev->name, hdev);
 
-	serdev_device_set_client_ops(hu->serdev, &hci_serdev_client_ops);
-
-	return serdev_device_open(hu->serdev);
+	return 0;
 }
 
 /* Reset device */
@@ -136,15 +132,11 @@ static int hci_uart_flush(struct hci_dev *hdev)
 /* Close device */
 static int hci_uart_close(struct hci_dev *hdev)
 {
-	struct hci_uart *hu  = hci_get_drvdata(hdev);
-
 	BT_DBG("hdev %p", hdev);
 
 	hci_uart_flush(hdev);
 	hdev->flush = NULL;
 
-	serdev_device_close(hu->serdev);
-
 	return 0;
 }
 
@@ -289,6 +281,8 @@ int hci_uart_register_device(struct hci_uart *hu,
 
 	BT_DBG("");
 
+	serdev_device_set_client_ops(hu->serdev, &hci_serdev_client_ops);
+
 	err = p->open(hu);
 	if (err)
 		return err;
-- 
2.11.0

[PATCHv2 04/11] tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init

[Sebastian Reichel]

The UPF_BOOT_AUTOCONF flag is needed for proper
flow control support.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 drivers/tty/serial/omap-serial.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 6c6f82ad8d5c..a4734649a0f0 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1597,6 +1597,9 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
 
 	of_property_read_u32(dev->of_node, "clock-frequency",
 					 &omap_up_info->uartclk);
+
+	omap_up_info->flags = UPF_BOOT_AUTOCONF;
+
 	return omap_up_info;
 }
 
-- 
2.11.0

Re: [PATCHv2 04/11] tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 369 bytes --]

On Tue 2017-03-21 23:32:09, Sebastian Reichel wrote:
> The UPF_BOOT_AUTOCONF flag is needed for proper
> flow control support.
> 
> Signed-off-by: Sebastian Reichel <sre@kernel.org>

Acked-by: Pavel Machek <pavel@ucw.cz>

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

[PATCHv2 05/11] serdev: add serdev_device_wait_until_sent

[Sebastian Reichel]

Add method, which waits until the transmission buffer has been sent.
Note, that the change in ttyport_write_wakeup is related, since
tty_wait_until_sent will hang without that change.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 drivers/tty/serdev/core.c           | 11 +++++++++++
 drivers/tty/serdev/serdev-ttyport.c | 15 ++++++++++++++-
 include/linux/serdev.h              |  3 +++
 3 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index f4c6c90add78..a63b74031e22 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -173,6 +173,17 @@ void serdev_device_set_flow_control(struct serdev_device *serdev, bool enable)
 }
 EXPORT_SYMBOL_GPL(serdev_device_set_flow_control);
 
+void serdev_device_wait_until_sent(struct serdev_device *serdev, long timeout)
+{
+	struct serdev_controller *ctrl = serdev->ctrl;
+
+	if (!ctrl || !ctrl->ops->wait_until_sent)
+		return;
+
+	ctrl->ops->wait_until_sent(ctrl, timeout);
+}
+EXPORT_SYMBOL_GPL(serdev_device_wait_until_sent);
+
 static int serdev_drv_probe(struct device *dev)
 {
 	const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index d05393594f15..db2bc601e554 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -14,6 +14,7 @@
 #include <linux/serdev.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
+#include <linux/poll.h>
 
 #define SERPORT_ACTIVE		1
 
@@ -47,10 +48,13 @@ static void ttyport_write_wakeup(struct tty_port *port)
 	struct serport *serport = serdev_controller_get_drvdata(ctrl);
 
 	if (!test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &port->tty->flags))
-		return;
+		goto out;
 
 	if (test_bit(SERPORT_ACTIVE, &serport->flags))
 		serdev_controller_write_wakeup(ctrl);
+
+out:
+	wake_up_interruptible_poll(&port->tty->write_wait, POLLOUT);
 }
 
 static const struct tty_port_client_operations client_ops = {
@@ -167,6 +171,14 @@ static void ttyport_set_flow_control(struct serdev_controller *ctrl, bool enable
 	tty_set_termios(tty, &ktermios);
 }
 
+static void ttyport_wait_until_sent(struct serdev_controller *ctrl, long timeout)
+{
+	struct serport *serport = serdev_controller_get_drvdata(ctrl);
+	struct tty_struct *tty = serport->tty;
+
+	tty_wait_until_sent(tty, timeout);
+}
+
 static const struct serdev_controller_ops ctrl_ops = {
 	.write_buf = ttyport_write_buf,
 	.write_flush = ttyport_write_flush,
@@ -175,6 +187,7 @@ static const struct serdev_controller_ops ctrl_ops = {
 	.close = ttyport_close,
 	.set_flow_control = ttyport_set_flow_control,
 	.set_baudrate = ttyport_set_baudrate,
+	.wait_until_sent = ttyport_wait_until_sent,
 };
 
 struct device *serdev_tty_port_register(struct tty_port *port,
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index 9519da6253a8..a308b206d204 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -81,6 +81,7 @@ struct serdev_controller_ops {
 	void (*close)(struct serdev_controller *);
 	void (*set_flow_control)(struct serdev_controller *, bool);
 	unsigned int (*set_baudrate)(struct serdev_controller *, unsigned int);
+	void (*wait_until_sent)(struct serdev_controller *, long);
 };
 
 /**
@@ -186,6 +187,7 @@ int serdev_device_open(struct serdev_device *);
 void serdev_device_close(struct serdev_device *);
 unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
 void serdev_device_set_flow_control(struct serdev_device *, bool);
+void serdev_device_wait_until_sent(struct serdev_device *, long);
 int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
 void serdev_device_write_flush(struct serdev_device *);
 int serdev_device_write_room(struct serdev_device *);
@@ -223,6 +225,7 @@ static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev
 	return 0;
 }
 static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {}
+static inline void serdev_device_wait_until_sent(struct serdev_device *sdev, long timeout) {}
 static inline int serdev_device_write_buf(struct serdev_device *sdev, const unsigned char *buf, size_t count)
 {
 	return -ENODEV;
-- 
2.11.0

Re: [PATCHv2 05/11] serdev: add serdev_device_wait_until_sent

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 677 bytes --]

Hi!

> @@ -47,10 +48,13 @@ static void ttyport_write_wakeup(struct tty_port *port)
>  	struct serport *serport = serdev_controller_get_drvdata(ctrl);
>  
>  	if (!test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &port->tty->flags))
> -		return;
> +		goto out;
>  
>  	if (test_bit(SERPORT_ACTIVE, &serport->flags))
>  		serdev_controller_write_wakeup(ctrl);
> +
> +out:

I'd do "if (test_and_clear_bit() && test_bit()) serdev_()"
here. Otherwise it looks fine.

Acked-by: Pavel Machek <pavel@ucw.cz>

									Pavel
									
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

[PATCHv2 06/11] serdev: implement get/set tiocm

[Sebastian Reichel]

Add method for getting and setting tiocm.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 drivers/tty/serdev/core.c           | 22 ++++++++++++++++++++++
 drivers/tty/serdev/serdev-ttyport.c | 24 ++++++++++++++++++++++++
 include/linux/serdev.h              | 13 +++++++++++++
 3 files changed, 59 insertions(+)

diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index a63b74031e22..1e1cbae3a0ea 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -184,6 +184,28 @@ void serdev_device_wait_until_sent(struct serdev_device *serdev, long timeout)
 }
 EXPORT_SYMBOL_GPL(serdev_device_wait_until_sent);
 
+int serdev_device_get_tiocm(struct serdev_device *serdev)
+{
+	struct serdev_controller *ctrl = serdev->ctrl;
+
+	if (!ctrl || !ctrl->ops->get_tiocm)
+		return -ENOTSUPP;
+
+	return ctrl->ops->get_tiocm(ctrl);
+}
+EXPORT_SYMBOL_GPL(serdev_device_get_tiocm);
+
+int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear)
+{
+	struct serdev_controller *ctrl = serdev->ctrl;
+
+	if (!ctrl || !ctrl->ops->set_tiocm)
+		return -ENOTSUPP;
+
+	return ctrl->ops->set_tiocm(ctrl, set, clear);
+}
+EXPORT_SYMBOL_GPL(serdev_device_set_tiocm);
+
 static int serdev_drv_probe(struct device *dev)
 {
 	const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index db2bc601e554..c5bdb901ff11 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -179,6 +179,28 @@ static void ttyport_wait_until_sent(struct serdev_controller *ctrl, long timeout
 	tty_wait_until_sent(tty, timeout);
 }
 
+static int ttyport_get_tiocm(struct serdev_controller *ctrl)
+{
+	struct serport *serport = serdev_controller_get_drvdata(ctrl);
+	struct tty_struct *tty = serport->tty;
+
+	if (!tty->ops->tiocmget)
+		return -ENOTSUPP;
+
+	return tty->driver->ops->tiocmget(tty);
+}
+
+static int ttyport_set_tiocm(struct serdev_controller *ctrl, unsigned int set, unsigned int clear)
+{
+	struct serport *serport = serdev_controller_get_drvdata(ctrl);
+	struct tty_struct *tty = serport->tty;
+
+	if (!tty->ops->tiocmset)
+		return -ENOTSUPP;
+
+	return tty->driver->ops->tiocmset(tty, set, clear);
+}
+
 static const struct serdev_controller_ops ctrl_ops = {
 	.write_buf = ttyport_write_buf,
 	.write_flush = ttyport_write_flush,
@@ -188,6 +210,8 @@ static const struct serdev_controller_ops ctrl_ops = {
 	.set_flow_control = ttyport_set_flow_control,
 	.set_baudrate = ttyport_set_baudrate,
 	.wait_until_sent = ttyport_wait_until_sent,
+	.get_tiocm = ttyport_get_tiocm,
+	.set_tiocm = ttyport_set_tiocm,
 };
 
 struct device *serdev_tty_port_register(struct tty_port *port,
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index a308b206d204..3ad1d695f947 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -15,6 +15,7 @@
 
 #include <linux/types.h>
 #include <linux/device.h>
+#include <asm-generic/termios.h>
 
 struct serdev_controller;
 struct serdev_device;
@@ -82,6 +83,8 @@ struct serdev_controller_ops {
 	void (*set_flow_control)(struct serdev_controller *, bool);
 	unsigned int (*set_baudrate)(struct serdev_controller *, unsigned int);
 	void (*wait_until_sent)(struct serdev_controller *, long);
+	int (*get_tiocm)(struct serdev_controller *);
+	int (*set_tiocm)(struct serdev_controller *, unsigned int, unsigned int);
 };
 
 /**
@@ -188,6 +191,8 @@ void serdev_device_close(struct serdev_device *);
 unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
 void serdev_device_set_flow_control(struct serdev_device *, bool);
 void serdev_device_wait_until_sent(struct serdev_device *, long);
+int serdev_device_get_tiocm(struct serdev_device *);
+int serdev_device_set_tiocm(struct serdev_device *, int, int);
 int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
 void serdev_device_write_flush(struct serdev_device *);
 int serdev_device_write_room(struct serdev_device *);
@@ -226,6 +231,14 @@ static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev
 }
 static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {}
 static inline void serdev_device_wait_until_sent(struct serdev_device *sdev, long timeout) {}
+static inline int serdev_device_get_tiocm(struct serdev_device *serdev)
+{
+	return -ENOTSUPP;
+}
+static inline int serdev_device_set_tiocm(struct serdev_controller *serdev, int set, int clear)
+{
+	return -ENOTSUPP;
+}
 static inline int serdev_device_write_buf(struct serdev_device *sdev, const unsigned char *buf, size_t count)
 {
 	return -ENODEV;
-- 
2.11.0

[PATCHv2.1] serdev: implement get/set tiocm

[Sebastian Reichel]

Add method for getting and setting tiocm.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
Changes since PATCHv2:
 * fix serdev_device_set_tiocm inline definition for disabled SERDEV
 * use <linux/termios.h> instead of <asm-generic/termios.h>
---
 drivers/tty/serdev/core.c           | 22 ++++++++++++++++++++++
 drivers/tty/serdev/serdev-ttyport.c | 24 ++++++++++++++++++++++++
 include/linux/serdev.h              | 13 +++++++++++++
 3 files changed, 59 insertions(+)

diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index a63b74031e22..1e1cbae3a0ea 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -184,6 +184,28 @@ void serdev_device_wait_until_sent(struct serdev_device *serdev, long timeout)
 }
 EXPORT_SYMBOL_GPL(serdev_device_wait_until_sent);
 
+int serdev_device_get_tiocm(struct serdev_device *serdev)
+{
+	struct serdev_controller *ctrl = serdev->ctrl;
+
+	if (!ctrl || !ctrl->ops->get_tiocm)
+		return -ENOTSUPP;
+
+	return ctrl->ops->get_tiocm(ctrl);
+}
+EXPORT_SYMBOL_GPL(serdev_device_get_tiocm);
+
+int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear)
+{
+	struct serdev_controller *ctrl = serdev->ctrl;
+
+	if (!ctrl || !ctrl->ops->set_tiocm)
+		return -ENOTSUPP;
+
+	return ctrl->ops->set_tiocm(ctrl, set, clear);
+}
+EXPORT_SYMBOL_GPL(serdev_device_set_tiocm);
+
 static int serdev_drv_probe(struct device *dev)
 {
 	const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index db2bc601e554..c5bdb901ff11 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -179,6 +179,28 @@ static void ttyport_wait_until_sent(struct serdev_controller *ctrl, long timeout
 	tty_wait_until_sent(tty, timeout);
 }
 
+static int ttyport_get_tiocm(struct serdev_controller *ctrl)
+{
+	struct serport *serport = serdev_controller_get_drvdata(ctrl);
+	struct tty_struct *tty = serport->tty;
+
+	if (!tty->ops->tiocmget)
+		return -ENOTSUPP;
+
+	return tty->driver->ops->tiocmget(tty);
+}
+
+static int ttyport_set_tiocm(struct serdev_controller *ctrl, unsigned int set, unsigned int clear)
+{
+	struct serport *serport = serdev_controller_get_drvdata(ctrl);
+	struct tty_struct *tty = serport->tty;
+
+	if (!tty->ops->tiocmset)
+		return -ENOTSUPP;
+
+	return tty->driver->ops->tiocmset(tty, set, clear);
+}
+
 static const struct serdev_controller_ops ctrl_ops = {
 	.write_buf = ttyport_write_buf,
 	.write_flush = ttyport_write_flush,
@@ -188,6 +210,8 @@ static const struct serdev_controller_ops ctrl_ops = {
 	.set_flow_control = ttyport_set_flow_control,
 	.set_baudrate = ttyport_set_baudrate,
 	.wait_until_sent = ttyport_wait_until_sent,
+	.get_tiocm = ttyport_get_tiocm,
+	.set_tiocm = ttyport_set_tiocm,
 };
 
 struct device *serdev_tty_port_register(struct tty_port *port,
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index a308b206d204..e29a270f603c 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -15,6 +15,7 @@
 
 #include <linux/types.h>
 #include <linux/device.h>
+#include <linux/termios.h>
 
 struct serdev_controller;
 struct serdev_device;
@@ -82,6 +83,8 @@ struct serdev_controller_ops {
 	void (*set_flow_control)(struct serdev_controller *, bool);
 	unsigned int (*set_baudrate)(struct serdev_controller *, unsigned int);
 	void (*wait_until_sent)(struct serdev_controller *, long);
+	int (*get_tiocm)(struct serdev_controller *);
+	int (*set_tiocm)(struct serdev_controller *, unsigned int, unsigned int);
 };
 
 /**
@@ -188,6 +191,8 @@ void serdev_device_close(struct serdev_device *);
 unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
 void serdev_device_set_flow_control(struct serdev_device *, bool);
 void serdev_device_wait_until_sent(struct serdev_device *, long);
+int serdev_device_get_tiocm(struct serdev_device *);
+int serdev_device_set_tiocm(struct serdev_device *, int, int);
 int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
 void serdev_device_write_flush(struct serdev_device *);
 int serdev_device_write_room(struct serdev_device *);
@@ -226,6 +231,14 @@ static inline unsigned int serdev_device_set_baudrate(struct serdev_device *sdev
 }
 static inline void serdev_device_set_flow_control(struct serdev_device *sdev, bool enable) {}
 static inline void serdev_device_wait_until_sent(struct serdev_device *sdev, long timeout) {}
+static inline int serdev_device_get_tiocm(struct serdev_device *serdev)
+{
+	return -ENOTSUPP;
+}
+static inline int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear)
+{
+	return -ENOTSUPP;
+}
 static inline int serdev_device_write_buf(struct serdev_device *sdev, const unsigned char *buf, size_t count)
 {
 	return -ENODEV;
-- 
2.11.0

Re: [PATCHv2.1] serdev: implement get/set tiocm

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 338 bytes --]

On Wed 2017-03-22 01:58:37, Sebastian Reichel wrote:
> Add method for getting and setting tiocm.
> 
> Signed-off-by: Sebastian Reichel <sre@kernel.org>

Acked-by: Pavel Machek <pavel@ucw.cz>

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCHv2.1] serdev: implement get/set tiocm

[Rob Herring]

On Tue, Mar 21, 2017 at 7:58 PM, Sebastian Reichel <sre@kernel.org> wrote:
> Add method for getting and setting tiocm.
>
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> ---
> Changes since PATCHv2:
>  * fix serdev_device_set_tiocm inline definition for disabled SERDEV
>  * use <linux/termios.h> instead of <asm-generic/termios.h>
> ---
>  drivers/tty/serdev/core.c           | 22 ++++++++++++++++++++++
>  drivers/tty/serdev/serdev-ttyport.c | 24 ++++++++++++++++++++++++
>  include/linux/serdev.h              | 13 +++++++++++++
>  3 files changed, 59 insertions(+)

I'm not that big of a fan of {set,get}_tiocm, but I guess it is fine.

Acked-by: Rob Herring <robh@kernel.org>

Rob

[PATCHv2 07/11] serdev: add helpers for cts and rts handling

[Sebastian Reichel]

Add serdev helper functions for handling of cts and rts
lines using the serdev's tiocm functions.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
 include/linux/serdev.h | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index 3ad1d695f947..8cdce2ea0d51 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -16,6 +16,7 @@
 #include <linux/types.h>
 #include <linux/device.h>
 #include <asm-generic/termios.h>
+#include <linux/delay.h>
 
 struct serdev_controller;
 struct serdev_device;
@@ -254,6 +255,36 @@ static inline int serdev_device_write_room(struct serdev_device *sdev)
 
 #endif /* CONFIG_SERIAL_DEV_BUS */
 
+static inline bool serdev_device_get_cts(struct serdev_device *serdev)
+{
+	int status = serdev_device_get_tiocm(serdev);
+	return !!(status & TIOCM_CTS);
+}
+
+static inline int serdev_device_wait_for_cts(struct serdev_device *serdev, bool state, int timeout_ms)
+{
+	unsigned long timeout;
+	bool signal;
+
+	timeout = jiffies + msecs_to_jiffies(timeout_ms);
+	while (!time_after(jiffies, timeout)) {
+		signal = serdev_device_get_cts(serdev);
+		if (signal == state)
+			return 0;
+		usleep_range(1000, 2000);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static inline int serdev_device_set_rts(struct serdev_device *serdev, bool enable)
+{
+	if (enable)
+		return serdev_device_set_tiocm(serdev, TIOCM_OUT2 | TIOCM_RTS, 0);
+	else
+		return serdev_device_set_tiocm(serdev, 0, TIOCM_OUT2 | TIOCM_RTS);
+}
+
 /*
  * serdev hooks into TTY core
  */
-- 
2.11.0

Re: [PATCHv2 07/11] serdev: add helpers for cts and rts handling

[Rob Herring]

On Tue, Mar 21, 2017 at 5:32 PM, Sebastian Reichel <sre@kernel.org> wrote:
> Add serdev helper functions for handling of cts and rts
> lines using the serdev's tiocm functions.
>
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> ---
>  include/linux/serdev.h | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>
> diff --git a/include/linux/serdev.h b/include/linux/serdev.h
> index 3ad1d695f947..8cdce2ea0d51 100644
> --- a/include/linux/serdev.h
> +++ b/include/linux/serdev.h
> @@ -16,6 +16,7 @@
>  #include <linux/types.h>
>  #include <linux/device.h>
>  #include <asm-generic/termios.h>
> +#include <linux/delay.h>
>
>  struct serdev_controller;
>  struct serdev_device;
> @@ -254,6 +255,36 @@ static inline int serdev_device_write_room(struct serdev_device *sdev)
>
>  #endif /* CONFIG_SERIAL_DEV_BUS */
>
> +static inline bool serdev_device_get_cts(struct serdev_device *serdev)
> +{
> +       int status = serdev_device_get_tiocm(serdev);
> +       return !!(status & TIOCM_CTS);
> +}
> +
> +static inline int serdev_device_wait_for_cts(struct serdev_device *serdev, bool state, int timeout_ms)
> +{
> +       unsigned long timeout;
> +       bool signal;
> +
> +       timeout = jiffies + msecs_to_jiffies(timeout_ms);
> +       while (!time_after(jiffies, timeout)) {

You can use time_is_after_jiffies(timeout) instead of !time_after.

> +               signal = serdev_device_get_cts(serdev);
> +               if (signal == state)
> +                       return 0;
> +               usleep_range(1000, 2000);
> +       }
> +
> +       return -ETIMEDOUT;
> +}
> +
> +static inline int serdev_device_set_rts(struct serdev_device *serdev, bool enable)
> +{
> +       if (enable)
> +               return serdev_device_set_tiocm(serdev, TIOCM_OUT2 | TIOCM_RTS, 0);

Perhaps a comment why we're messing with OUT2.

With those,

Acked-by: Rob Herring <robh@kernel.org>

> +       else
> +               return serdev_device_set_tiocm(serdev, 0, TIOCM_OUT2 | TIOCM_RTS);
> +}
> +
>  /*
>   * serdev hooks into TTY core
>   */
> --
> 2.11.0
>

[PATCHv2 08/11] dt-bindings: net: bluetooth: Add nokia-bluetooth

[Sebastian Reichel]

Add binding document for serial bluetooth chips using
Nokia H4+ protocol.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
Changes since PATCHv1:
 * change compatible strings
 * mention active high/low state for GPIOs
---
 .../devicetree/bindings/net/nokia-bluetooth.txt    | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/nokia-bluetooth.txt

diff --git a/Documentation/devicetree/bindings/net/nokia-bluetooth.txt b/Documentation/devicetree/bindings/net/nokia-bluetooth.txt
new file mode 100644
index 000000000000..42be7dc9a70b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nokia-bluetooth.txt
@@ -0,0 +1,51 @@
+Nokia Bluetooth Chips
+---------------------
+
+Nokia phones often come with UART connected bluetooth chips from different
+vendors and modified device API. Those devices speak a protocol named H4+
+(also known as h4p) by Nokia, which is similar to the H4 protocol from the
+Bluetooth standard. In addition to the H4 protocol it specifies two more
+UART status lines for wakeup of UART transceivers to improve power management
+and a few new packet types used to negotiate uart speed.
+
+Required properties:
+
+ - compatible: should contain "nokia,h4p-bluetooth" as well as one of the following:
+   * "brcm,bcm2048-nokia"
+   * "ti,wl1271-bluetooth-nokia"
+ - reset-gpios: GPIO specifier, used to reset the BT module (active low)
+ - bluetooth-wakeup-gpios: GPIO specifier, used to wakeup the BT module (active high)
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor (active high)
+ - clock-names: should be "sysclk"
+ - clocks: should contain a clock specifier for every name in clock-names
+
+Optional properties:
+
+ - None
+
+Example:
+
+/ {
+       /* controlled (enabled/disabled) directly by BT module */
+       bluetooth_clk: vctcxo {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <38400000>;
+       };
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+
+       bluetooth {
+               compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
+
+               reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* gpio26 */
+               host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+               bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio37 */
+
+               clocks = <&bluetooth_clk>;
+               clock-names = "sysclk";
+       };
+};
-- 
2.11.0

Re: [PATCHv2 08/11] dt-bindings: net: bluetooth: Add nokia-bluetooth

[Rob Herring]

On Tue, Mar 21, 2017 at 5:32 PM, Sebastian Reichel <sre@kernel.org> wrote:
> Add binding document for serial bluetooth chips using
> Nokia H4+ protocol.
>
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> ---
> Changes since PATCHv1:
>  * change compatible strings
>  * mention active high/low state for GPIOs
> ---
>  .../devicetree/bindings/net/nokia-bluetooth.txt    | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/nokia-bluetooth.txt

Acked-by: Rob Herring <robh@kernel.org>

[PATCHv2 09/11] Bluetooth: add nokia driver

[Sebastian Reichel]

This adds a driver for the Nokia H4+ protocol, which is used
at least on the Nokia N9, N900 & N950.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
Changes since PATCHv1:
 * replace __u8 and uint8_t with u8
 * replace __u16 and uint16_t with u16
 * drop BT_BAUDRATE_DIVIDER and use btdev->sysclk_speed * 10 instead
 * fix wording of a sentence
 * fix error path of negotation & alive package receive functions
 * replaced nokia_wait_for_cts with newly introduced serdev function
 * use "nokia,h4p-bluetooth" as compatible string
---
 drivers/bluetooth/Kconfig     |  12 +
 drivers/bluetooth/Makefile    |   2 +
 drivers/bluetooth/hci_nokia.c | 819 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 833 insertions(+)
 create mode 100644 drivers/bluetooth/hci_nokia.c

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index c2c14a12713b..2e3e4d3547ad 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -86,6 +86,18 @@ config BT_HCIUART_H4
 
 	  Say Y here to compile support for HCI UART (H4) protocol.
 
+config BT_HCIUART_NOKIA
+	tristate "UART Nokia H4+ protocol support"
+	depends on BT_HCIUART
+	depends on SERIAL_DEV_BUS
+	depends on PM
+	help
+	  Nokia H4+ is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for Bluetooth devices
+	  with UART interface in Nokia devices.
+
+	  Say Y here to compile support for Nokia's H4+ protocol.
+
 config BT_HCIUART_BCSP
 	bool "BCSP protocol support"
 	depends on BT_HCIUART
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index fd571689eed6..a7f237320f4b 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -25,6 +25,8 @@ obj-$(CONFIG_BT_BCM)		+= btbcm.o
 obj-$(CONFIG_BT_RTL)		+= btrtl.o
 obj-$(CONFIG_BT_QCA)		+= btqca.o
 
+obj-$(CONFIG_BT_HCIUART_NOKIA)	+= hci_nokia.o
+
 btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
 
diff --git a/drivers/bluetooth/hci_nokia.c b/drivers/bluetooth/hci_nokia.c
new file mode 100644
index 000000000000..c77f04af01bf
--- /dev/null
+++ b/drivers/bluetooth/hci_nokia.c
@@ -0,0 +1,819 @@
+/*
+ *  Bluetooth HCI UART H4 driver with Nokia Extensions AKA Nokia H4+
+ *
+ *  Copyright (C) 2015 Marcel Holtmann <marcel@holtmann.org>
+ *  Copyright (C) 2015-2017 Sebastian Reichel <sre@kernel.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/gpio/consumer.h>
+#include <linux/unaligned/le_struct.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <linux/serdev.h>
+
+#include "hci_uart.h"
+#include "btbcm.h"
+
+#define NOKIA_ID_BCM2048	0x04
+#define NOKIA_ID_TI1271		0x31
+
+#define FIRMWARE_BCM2048	"nokia/bcmfw.bin"
+#define FIRMWARE_TI1271		"nokia/ti1273.bin"
+
+#define HCI_NOKIA_NEG_PKT	0x06
+#define HCI_NOKIA_ALIVE_PKT	0x07
+#define HCI_NOKIA_RADIO_PKT	0x08
+
+#define HCI_NOKIA_NEG_HDR_SIZE		1
+#define HCI_NOKIA_MAX_NEG_SIZE		255
+#define HCI_NOKIA_ALIVE_HDR_SIZE	1
+#define HCI_NOKIA_MAX_ALIVE_SIZE	255
+#define HCI_NOKIA_RADIO_HDR_SIZE	2
+#define HCI_NOKIA_MAX_RADIO_SIZE	255
+
+#define NOKIA_PROTO_PKT		0x44
+#define NOKIA_PROTO_BYTE	0x4c
+
+#define NOKIA_NEG_REQ		0x00
+#define NOKIA_NEG_ACK		0x20
+#define NOKIA_NEG_NAK		0x40
+
+#define H4_TYPE_SIZE		1
+
+#define NOKIA_RECV_ALIVE \
+	.type = HCI_NOKIA_ALIVE_PKT, \
+	.hlen = HCI_NOKIA_ALIVE_HDR_SIZE, \
+	.loff = 0, \
+	.lsize = 1, \
+	.maxlen = HCI_NOKIA_MAX_ALIVE_SIZE \
+
+#define NOKIA_RECV_NEG \
+	.type = HCI_NOKIA_NEG_PKT, \
+	.hlen = HCI_NOKIA_NEG_HDR_SIZE, \
+	.loff = 0, \
+	.lsize = 1, \
+	.maxlen = HCI_NOKIA_MAX_NEG_SIZE \
+
+#define NOKIA_RECV_RADIO \
+	.type = HCI_NOKIA_RADIO_PKT, \
+	.hlen = HCI_NOKIA_RADIO_HDR_SIZE, \
+	.loff = 1, \
+	.lsize = 1, \
+	.maxlen = HCI_NOKIA_MAX_RADIO_SIZE \
+
+struct hci_nokia_neg_hdr {
+	u8	dlen;
+} __packed;
+
+struct hci_nokia_neg_cmd {
+	u8	ack;
+	u16	baud;
+	u16	unused1;
+	u8	proto;
+	u16	sys_clk;
+	u16	unused2;
+} __packed;
+
+#define NOKIA_ALIVE_REQ   0x55
+#define NOKIA_ALIVE_RESP  0xcc
+
+struct hci_nokia_alive_hdr {
+	u8	dlen;
+} __packed;
+
+struct hci_nokia_alive_pkt {
+	u8	mid;
+	u8	unused;
+} __packed;
+
+struct hci_nokia_neg_evt {
+	u8	ack;
+	u16	baud;
+	u16	unused1;
+	u8	proto;
+	u16	sys_clk;
+	u16	unused2;
+	u8	man_id;
+	u8	ver_id;
+} __packed;
+
+#define MAX_BAUD_RATE		3692300
+#define SETUP_BAUD_RATE		921600
+#define INIT_BAUD_RATE		120000
+
+struct hci_nokia_radio_hdr {
+	u8	evt;
+	u8	dlen;
+} __packed;
+
+struct nokia_bt_dev {
+	struct hci_uart hu;
+	struct serdev_device *serdev;
+
+	struct gpio_desc *reset;
+	struct gpio_desc *wakeup_host;
+	struct gpio_desc *wakeup_bt;
+	unsigned long sysclk_speed;
+
+	int wake_irq;
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	bdaddr_t bdaddr;
+
+	int init_error;
+	struct completion init_completion;
+
+	u8 man_id;
+	u8 ver_id;
+
+	bool initialized;
+	bool tx_enabled;
+	bool rx_enabled;
+};
+
+static int nokia_enqueue(struct hci_uart *hu, struct sk_buff *skb);
+
+static void nokia_flow_control(struct serdev_device *serdev, bool enable)
+{
+	if (enable) {
+		serdev_device_set_rts(serdev, true);
+		serdev_device_set_flow_control(serdev, true);
+	} else {
+		serdev_device_set_flow_control(serdev, false);
+		serdev_device_set_rts(serdev, false);
+	}
+}
+
+static irqreturn_t wakeup_handler(int irq, void *data)
+{
+	struct nokia_bt_dev *btdev = data;
+	struct device *dev = &btdev->serdev->dev;
+	int wake_state = gpiod_get_value(btdev->wakeup_host);
+
+	if (btdev->rx_enabled == wake_state)
+		return IRQ_HANDLED;
+
+	if (wake_state)
+		pm_runtime_get(dev);
+	else
+		pm_runtime_put(dev);
+
+	btdev->rx_enabled = wake_state;
+
+	return IRQ_HANDLED;
+}
+
+static int nokia_reset(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	int err;
+
+	/* reset routine */
+	gpiod_set_value_cansleep(btdev->reset, 1);
+	gpiod_set_value_cansleep(btdev->wakeup_bt, 1);
+
+	msleep(100);
+
+	/* safety check */
+	err = gpiod_get_value_cansleep(btdev->wakeup_host);
+	if (err == 1) {
+		dev_err(dev, "reset: host wakeup not low!");
+		return -EPROTO;
+	}
+
+	/* flush queue */
+	serdev_device_write_flush(btdev->serdev);
+
+	/* init uart */
+	nokia_flow_control(btdev->serdev, false);
+	serdev_device_set_baudrate(btdev->serdev, INIT_BAUD_RATE);
+
+	gpiod_set_value_cansleep(btdev->reset, 0);
+
+	/* wait for cts */
+	err = serdev_device_wait_for_cts(btdev->serdev, true, 200);
+	if (err < 0) {
+		dev_err(dev, "CTS not received: %d", err);
+		return err;
+	}
+
+	nokia_flow_control(btdev->serdev, true);
+
+	return 0;
+}
+
+static int nokia_send_alive_packet(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct hci_nokia_alive_hdr *hdr;
+	struct hci_nokia_alive_pkt *pkt;
+	struct sk_buff *skb;
+	int len;
+
+	init_completion(&btdev->init_completion);
+
+	len = H4_TYPE_SIZE + sizeof(*hdr) + sizeof(*pkt);
+	skb = bt_skb_alloc(len, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hci_skb_pkt_type(skb) = HCI_NOKIA_ALIVE_PKT;
+	memset(skb->data, 0x00, len);
+
+	hdr = (struct hci_nokia_alive_hdr *)skb_put(skb, sizeof(*hdr));
+	hdr->dlen = sizeof(*pkt);
+	pkt = (struct hci_nokia_alive_pkt *)skb_put(skb, sizeof(*pkt));
+	pkt->mid = NOKIA_ALIVE_REQ;
+
+	nokia_enqueue(hu, skb);
+	hci_uart_tx_wakeup(hu);
+
+	dev_dbg(dev, "Alive sent");
+
+	if (!wait_for_completion_interruptible_timeout(&btdev->init_completion,
+		msecs_to_jiffies(1000))) {
+		return -ETIMEDOUT;
+	}
+
+	if (btdev->init_error < 0)
+		return btdev->init_error;
+
+	return 0;
+}
+
+static int nokia_send_negotiation(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct hci_nokia_neg_cmd *neg_cmd;
+	struct hci_nokia_neg_hdr *neg_hdr;
+	struct sk_buff *skb;
+	int len, err;
+	u16 baud = DIV_ROUND_CLOSEST(btdev->sysclk_speed * 10, SETUP_BAUD_RATE);
+	int sysclk = btdev->sysclk_speed / 1000;
+
+	len = H4_TYPE_SIZE + sizeof(*neg_hdr) + sizeof(*neg_cmd);
+	skb = bt_skb_alloc(len, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hci_skb_pkt_type(skb) = HCI_NOKIA_NEG_PKT;
+
+	neg_hdr = (struct hci_nokia_neg_hdr *)skb_put(skb, sizeof(*neg_hdr));
+	neg_hdr->dlen = sizeof(*neg_cmd);
+
+	neg_cmd = (struct hci_nokia_neg_cmd *)skb_put(skb, sizeof(*neg_cmd));
+	neg_cmd->ack = NOKIA_NEG_REQ;
+	neg_cmd->baud = cpu_to_le16(baud);
+	neg_cmd->unused1 = 0x0000;
+	neg_cmd->proto = NOKIA_PROTO_BYTE;
+	neg_cmd->sys_clk = cpu_to_le16(sysclk);
+	neg_cmd->unused2 = 0x0000;
+
+	btdev->init_error = 0;
+	init_completion(&btdev->init_completion);
+
+	nokia_enqueue(hu, skb);
+	hci_uart_tx_wakeup(hu);
+
+	dev_dbg(dev, "Negotiation sent");
+
+	if (!wait_for_completion_interruptible_timeout(&btdev->init_completion,
+		msecs_to_jiffies(10000))) {
+		return -ETIMEDOUT;
+	}
+
+	if (btdev->init_error < 0)
+		return btdev->init_error;
+
+	/* Change to previously negotiated speed. Flow Control
+	 * is disabled until bluetooth adapter is ready to avoid
+	 * broken bytes being received.
+	 */
+	nokia_flow_control(btdev->serdev, false);
+	serdev_device_set_baudrate(btdev->serdev, SETUP_BAUD_RATE);
+	err = serdev_device_wait_for_cts(btdev->serdev, true, 200);
+	if (err < 0) {
+		dev_err(dev, "CTS not received: %d", err);
+		return err;
+	}
+	nokia_flow_control(btdev->serdev, true);
+
+	dev_dbg(dev, "Negotiation successful");
+
+	return 0;
+}
+
+static int nokia_setup_fw(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	const char *fwname;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	size_t fw_size;
+	int err;
+
+	dev_dbg(dev, "setup firmware");
+
+	if (btdev->man_id == NOKIA_ID_BCM2048) {
+		fwname = FIRMWARE_BCM2048;
+	} else if (btdev->man_id == NOKIA_ID_TI1271) {
+		fwname = FIRMWARE_TI1271;
+	} else {
+		dev_err(dev, "Unsupported bluetooth device!");
+		return -ENODEV;
+	}
+
+	err = request_firmware(&fw, fwname, dev);
+	if (err < 0) {
+		dev_err(dev, "%s: Failed to load Nokia firmware file (%d)",
+			hu->hdev->name, err);
+		return err;
+	}
+
+	fw_ptr = fw->data;
+	fw_size = fw->size;
+
+	while (fw_size >= 4) {
+		u16 pkt_size = get_unaligned_le16(fw_ptr);
+		u8 pkt_type = fw_ptr[2];
+		const struct hci_command_hdr *cmd;
+		u16 opcode;
+		struct sk_buff *skb;
+
+		switch (pkt_type) {
+		case HCI_COMMAND_PKT:
+			cmd = (struct hci_command_hdr *)(fw_ptr + 3);
+			opcode = le16_to_cpu(cmd->opcode);
+
+			skb = __hci_cmd_sync(hu->hdev, opcode, cmd->plen,
+					     fw_ptr + 3 + HCI_COMMAND_HDR_SIZE,
+					     HCI_INIT_TIMEOUT);
+			if (IS_ERR(skb)) {
+				err = PTR_ERR(skb);
+				dev_err(dev, "%s: FW command %04x failed (%d)",
+				       hu->hdev->name, opcode, err);
+				goto done;
+			}
+			kfree_skb(skb);
+			break;
+		case HCI_NOKIA_RADIO_PKT:
+		case HCI_NOKIA_NEG_PKT:
+		case HCI_NOKIA_ALIVE_PKT:
+			break;
+		}
+
+		fw_ptr += pkt_size + 2;
+		fw_size -= pkt_size + 2;
+	}
+
+done:
+	release_firmware(fw);
+	return err;
+}
+
+static int nokia_setup(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	int err;
+
+	btdev->initialized = false;
+
+	nokia_flow_control(btdev->serdev, false);
+
+	pm_runtime_get_sync(dev);
+
+	if (btdev->tx_enabled) {
+		gpiod_set_value_cansleep(btdev->wakeup_bt, 0);
+		pm_runtime_put(&btdev->serdev->dev);
+		btdev->tx_enabled = false;
+	}
+
+	dev_dbg(dev, "protocol setup");
+
+	/* 0. reset connection */
+	err = nokia_reset(hu);
+	if (err < 0) {
+		dev_err(dev, "Reset failed: %d", err);
+		goto out;
+	}
+
+	/* 1. negotiate speed etc */
+	err = nokia_send_negotiation(hu);
+	if (err < 0) {
+		dev_err(dev, "Negotiation failed: %d", err);
+		goto out;
+	}
+
+	/* 2. verify correct setup using alive packet */
+	err = nokia_send_alive_packet(hu);
+	if (err < 0) {
+		dev_err(dev, "Alive check failed: %d", err);
+		goto out;
+	}
+
+	/* 3. send firmware */
+	err = nokia_setup_fw(hu);
+	if (err < 0) {
+		dev_err(dev, "Could not setup FW: %d", err);
+		goto out;
+	}
+
+	nokia_flow_control(btdev->serdev, false);
+	serdev_device_set_baudrate(btdev->serdev, MAX_BAUD_RATE);
+	nokia_flow_control(btdev->serdev, true);
+
+	if (btdev->man_id == NOKIA_ID_BCM2048) {
+		hu->hdev->set_bdaddr = btbcm_set_bdaddr;
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hu->hdev->quirks);
+		dev_dbg(dev, "bcm2048 has invalid bluetooth address!");
+	}
+
+	dev_dbg(dev, "protocol setup done!");
+
+	gpiod_set_value_cansleep(btdev->wakeup_bt, 0);
+	pm_runtime_put(dev);
+	btdev->tx_enabled = false;
+	btdev->initialized = true;
+
+	return 0;
+out:
+	pm_runtime_put(dev);
+
+	return err;
+}
+
+static int nokia_open(struct hci_uart *hu)
+{
+	struct device *dev = &hu->serdev->dev;
+
+	dev_dbg(dev, "protocol open");
+
+	serdev_device_open(hu->serdev);
+
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static int nokia_flush(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+
+	dev_dbg(&btdev->serdev->dev, "flush device");
+
+	skb_queue_purge(&btdev->txq);
+
+	return 0;
+}
+
+static int nokia_close(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+
+	dev_dbg(dev, "close device");
+
+	btdev->initialized = false;
+
+	skb_queue_purge(&btdev->txq);
+
+	kfree_skb(btdev->rx_skb);
+
+	/* disable module */
+	gpiod_set_value(btdev->reset, 1);
+	gpiod_set_value(btdev->wakeup_bt, 0);
+
+	pm_runtime_disable(&btdev->serdev->dev);
+	serdev_device_close(btdev->serdev);
+
+	return 0;
+}
+
+/* Enqueue frame for transmittion (padding, crc, etc) */
+static int nokia_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	int err;
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+
+	/* Packets must be word aligned */
+	if (skb->len % 2) {
+		err = skb_pad(skb, 1);
+		if (err)
+			return err;
+		*skb_put(skb, 1) = 0x00;
+	}
+
+	skb_queue_tail(&btdev->txq, skb);
+
+	return 0;
+}
+
+static int nokia_recv_negotiation_packet(struct hci_dev *hdev,
+					 struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct hci_nokia_neg_hdr *hdr;
+	struct hci_nokia_neg_evt *evt;
+	int ret = 0;
+
+	hdr = (struct hci_nokia_neg_hdr *)skb->data;
+	if (hdr->dlen != sizeof(*evt)) {
+		btdev->init_error = -EIO;
+		ret = -EIO;
+		goto finish_neg;
+	}
+
+	evt = (struct hci_nokia_neg_evt *)skb_pull(skb, sizeof(*hdr));
+
+	if (evt->ack != NOKIA_NEG_ACK) {
+		dev_err(dev, "Negotiation received: wrong reply");
+		btdev->init_error = -EINVAL;
+		ret = -EINVAL;
+		goto finish_neg;
+	}
+
+	btdev->man_id = evt->man_id;
+	btdev->ver_id = evt->ver_id;
+
+	dev_dbg(dev, "Negotiation received: baud=%u:clk=%u:manu=%u:vers=%u",
+		evt->baud, evt->sys_clk, evt->man_id, evt->ver_id);
+
+finish_neg:
+	complete(&btdev->init_completion);
+	kfree_skb(skb);
+	return ret;
+}
+
+static int nokia_recv_alive_packet(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct hci_nokia_alive_hdr *hdr;
+	struct hci_nokia_alive_pkt *pkt;
+	int ret = 0;
+
+	hdr = (struct hci_nokia_alive_hdr *)skb->data;
+	if (hdr->dlen != sizeof(*pkt)) {
+		dev_err(dev, "Corrupted alive message");
+		btdev->init_error = -EIO;
+		ret = -EIO;
+		goto finish_alive;
+	}
+
+	pkt = (struct hci_nokia_alive_pkt *)skb_pull(skb, sizeof(*hdr));
+
+	if (pkt->mid != NOKIA_ALIVE_RESP) {
+		dev_err(dev, "Alive received: invalid response: 0x%02x!",
+			pkt->mid);
+		btdev->init_error = -EINVAL;
+		ret = -EINVAL;
+		goto finish_alive;
+	}
+
+	dev_dbg(dev, "Alive received");
+
+finish_alive:
+	complete(&btdev->init_completion);
+	kfree_skb(skb);
+	return ret;
+}
+
+static int nokia_recv_radio(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	/* Packets received on the dedicated radio channel are
+	 * HCI events and so feed them back into the core.
+	 */
+	hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+	return hci_recv_frame(hdev, skb);
+}
+
+/* Recv data */
+static const struct h4_recv_pkt nokia_recv_pkts[] = {
+	{ H4_RECV_ACL,		.recv = hci_recv_frame },
+	{ H4_RECV_SCO,		.recv = hci_recv_frame },
+	{ H4_RECV_EVENT,	.recv = hci_recv_frame },
+	{ NOKIA_RECV_ALIVE,	.recv = nokia_recv_alive_packet },
+	{ NOKIA_RECV_NEG,	.recv = nokia_recv_negotiation_packet },
+	{ NOKIA_RECV_RADIO,	.recv = nokia_recv_radio },
+};
+
+static int nokia_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	int err;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	btdev->rx_skb = h4_recv_buf(hu->hdev, btdev->rx_skb, data, count,
+				  nokia_recv_pkts, ARRAY_SIZE(nokia_recv_pkts));
+	if (IS_ERR(btdev->rx_skb)) {
+		err = PTR_ERR(btdev->rx_skb);
+		dev_err(dev, "Frame reassembly failed (%d)", err);
+		btdev->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static struct sk_buff *nokia_dequeue(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct sk_buff *result = skb_dequeue(&btdev->txq);
+
+	if (!btdev->initialized)
+		return result;
+
+	if (btdev->tx_enabled == !!result)
+		return result;
+
+	if (result) {
+		pm_runtime_get_sync(dev);
+		gpiod_set_value_cansleep(btdev->wakeup_bt, 1);
+	} else {
+		serdev_device_wait_until_sent(btdev->serdev, 0);
+		gpiod_set_value_cansleep(btdev->wakeup_bt, 0);
+		pm_runtime_put(dev);
+	}
+
+	btdev->tx_enabled = !!result;
+
+	return result;
+}
+
+static const struct hci_uart_proto nokia_proto = {
+	.id		= HCI_UART_NOKIA,
+	.name		= "Nokia",
+	.open		= nokia_open,
+	.close		= nokia_close,
+	.recv		= nokia_recv,
+	.enqueue	= nokia_enqueue,
+	.dequeue	= nokia_dequeue,
+	.flush		= nokia_flush,
+	.setup		= nokia_setup,
+	.manufacturer	= 1,
+};
+
+static int nokia_bluetooth_serdev_probe(struct serdev_device *serdev)
+{
+	struct device *dev = &serdev->dev;
+	struct nokia_bt_dev *btdev;
+	struct clk *sysclk;
+	int err = 0;
+
+	btdev = devm_kzalloc(dev, sizeof(*btdev), GFP_KERNEL);
+	if (!btdev)
+		return -ENOMEM;
+
+	btdev->hu.serdev = btdev->serdev = serdev;
+	serdev_device_set_drvdata(serdev, btdev);
+
+	btdev->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(btdev->reset)) {
+		err = PTR_ERR(btdev->reset);
+		dev_err(dev, "could not get reset gpio: %d", err);
+		return err;
+	}
+
+	btdev->wakeup_host = devm_gpiod_get(dev, "host-wakeup", GPIOD_IN);
+	if (IS_ERR(btdev->wakeup_host)) {
+		err = PTR_ERR(btdev->wakeup_host);
+		dev_err(dev, "could not get host wakeup gpio: %d", err);
+		return err;
+	}
+
+	btdev->wake_irq = gpiod_to_irq(btdev->wakeup_host);
+
+	err = devm_request_threaded_irq(dev, btdev->wake_irq, NULL,
+		wakeup_handler,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+		"wakeup", btdev);
+	if (err) {
+		dev_err(dev, "could request wakeup irq: %d", err);
+		return err;
+	}
+
+	btdev->wakeup_bt = devm_gpiod_get(dev, "bluetooth-wakeup",
+					   GPIOD_OUT_LOW);
+	if (IS_ERR(btdev->wakeup_bt)) {
+		err = PTR_ERR(btdev->wakeup_bt);
+		dev_err(dev, "could not get BT wakeup gpio: %d", err);
+		return err;
+	}
+
+	sysclk = devm_clk_get(dev, "sysclk");
+	if (IS_ERR(sysclk)) {
+		err = PTR_ERR(sysclk);
+		dev_err(dev, "could not get sysclk: %d", err);
+		return err;
+	}
+
+	clk_prepare_enable(sysclk);
+	btdev->sysclk_speed = clk_get_rate(sysclk);
+	clk_disable_unprepare(sysclk);
+
+	skb_queue_head_init(&btdev->txq);
+
+	btdev->hu.priv = btdev;
+	btdev->hu.alignment = 2; /* Nokia H4+ is word aligned */
+
+	err = hci_uart_register_device(&btdev->hu, &nokia_proto);
+	if (err) {
+		dev_err(dev, "could not register bluetooth uart: %d", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void nokia_bluetooth_serdev_remove(struct serdev_device *serdev)
+{
+	struct nokia_bt_dev *btdev = serdev_device_get_drvdata(serdev);
+	struct hci_uart *hu = &btdev->hu;
+	struct hci_dev *hdev = hu->hdev;
+
+	cancel_work_sync(&hu->write_work);
+
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+	hu->proto->close(hu);
+
+	pm_runtime_disable(&btdev->serdev->dev);
+}
+
+static int nokia_bluetooth_runtime_suspend(struct device *dev)
+{
+	struct serdev_device *serdev = to_serdev_device(dev);
+
+	nokia_flow_control(serdev, false);
+	return 0;
+}
+
+static int nokia_bluetooth_runtime_resume(struct device *dev)
+{
+	struct serdev_device *serdev = to_serdev_device(dev);
+
+	nokia_flow_control(serdev, true);
+	return 0;
+}
+
+static const struct dev_pm_ops nokia_bluetooth_pm_ops = {
+	SET_RUNTIME_PM_OPS(nokia_bluetooth_runtime_suspend,
+			   nokia_bluetooth_runtime_resume,
+			   NULL)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id nokia_bluetooth_of_match[] = {
+	{ .compatible = "nokia,h4p-bluetooth", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, nokia_bluetooth_of_match);
+#endif
+
+static struct serdev_device_driver nokia_bluetooth_serdev_driver = {
+	.probe = nokia_bluetooth_serdev_probe,
+	.remove = nokia_bluetooth_serdev_remove,
+	.driver = {
+		.name = "nokia-bluetooth",
+		.pm = &nokia_bluetooth_pm_ops,
+		.of_match_table = of_match_ptr(nokia_bluetooth_of_match),
+	},
+};
+
+module_serdev_device_driver(nokia_bluetooth_serdev_driver);
-- 
2.11.0

Re: [PATCHv2 09/11] Bluetooth: add nokia driver

[Rob Herring]

On Tue, Mar 21, 2017 at 5:32 PM, Sebastian Reichel <sre@kernel.org> wrote:
> This adds a driver for the Nokia H4+ protocol, which is used
> at least on the Nokia N9, N900 & N950.
>
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> ---

> +       btdev->wakeup_host = devm_gpiod_get(dev, "host-wakeup", GPIOD_IN);
> +       if (IS_ERR(btdev->wakeup_host)) {
> +               err = PTR_ERR(btdev->wakeup_host);
> +               dev_err(dev, "could not get host wakeup gpio: %d", err);
> +               return err;
> +       }
> +
> +       btdev->wake_irq = gpiod_to_irq(btdev->wakeup_host);

Missed this in the binding review, but generally, we make these
interrupts rather than gpios in the binding.

> +
> +       err = devm_request_threaded_irq(dev, btdev->wake_irq, NULL,
> +               wakeup_handler,
> +               IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +               "wakeup", btdev);
> +       if (err) {
> +               dev_err(dev, "could request wakeup irq: %d", err);
> +               return err;
> +       }

Re: [PATCHv2 09/11] Bluetooth: add nokia driver

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1346 bytes --]

Hi,

On Wed, Mar 22, 2017 at 04:26:28PM -0500, Rob Herring wrote:
> On Tue, Mar 21, 2017 at 5:32 PM, Sebastian Reichel <sre@kernel.org> wrote:
> > This adds a driver for the Nokia H4+ protocol, which is used
> > at least on the Nokia N9, N900 & N950.
> >
> > Signed-off-by: Sebastian Reichel <sre@kernel.org>
> > ---
> 
> > +       btdev->wakeup_host = devm_gpiod_get(dev, "host-wakeup", GPIOD_IN);
> > +       if (IS_ERR(btdev->wakeup_host)) {
> > +               err = PTR_ERR(btdev->wakeup_host);
> > +               dev_err(dev, "could not get host wakeup gpio: %d", err);
> > +               return err;
> > +       }
> > +
> > +       btdev->wake_irq = gpiod_to_irq(btdev->wakeup_host);
> 
> Missed this in the binding review, but generally, we make these
> interrupts rather than gpios in the binding.

I also read the state of the GPIO. AFAIK it's not possible to read
the state of an IRQ, so I can't switch to IRQ.

> > +
> > +       err = devm_request_threaded_irq(dev, btdev->wake_irq, NULL,
> > +               wakeup_handler,
> > +               IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > +               "wakeup", btdev);
> > +       if (err) {
> > +               dev_err(dev, "could request wakeup irq: %d", err);
> > +               return err;
> > +       }

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCHv2 09/11] Bluetooth: add nokia driver

[Frédéric Danis]

Hello Sebastian,

Le 21/03/2017 à 23:32, Sebastian Reichel a écrit :
> This adds a driver for the Nokia H4+ protocol, which is used
> at least on the Nokia N9, N900 & N950.
>
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> ---
> Changes since PATCHv1:
>   * replace __u8 and uint8_t with u8
>   * replace __u16 and uint16_t with u16
>   * drop BT_BAUDRATE_DIVIDER and use btdev->sysclk_speed * 10 instead
>   * fix wording of a sentence
>   * fix error path of negotation & alive package receive functions
>   * replaced nokia_wait_for_cts with newly introduced serdev function
>   * use "nokia,h4p-bluetooth" as compatible string
> ---
>   drivers/bluetooth/Kconfig     |  12 +
>   drivers/bluetooth/Makefile    |   2 +
>   drivers/bluetooth/hci_nokia.c | 819 ++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 833 insertions(+)
>   create mode 100644 drivers/bluetooth/hci_nokia.c
>
> diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
> index c2c14a12713b..2e3e4d3547ad 100644
> --- a/drivers/bluetooth/Kconfig
> +++ b/drivers/bluetooth/Kconfig
> @@ -86,6 +86,18 @@ config BT_HCIUART_H4
>   
>   	  Say Y here to compile support for HCI UART (H4) protocol.
>   
> +config BT_HCIUART_NOKIA
> +	tristate "UART Nokia H4+ protocol support"
> +	depends on BT_HCIUART
> +	depends on SERIAL_DEV_BUS
> +	depends on PM
> +	help
> +	  Nokia H4+ is serial protocol for communication between Bluetooth
> +	  device and host. This protocol is required for Bluetooth devices
> +	  with UART interface in Nokia devices.
> +
> +	  Say Y here to compile support for Nokia's H4+ protocol.
> +
>   config BT_HCIUART_BCSP
>   	bool "BCSP protocol support"
>   	depends on BT_HCIUART
> diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
> index fd571689eed6..a7f237320f4b 100644
> --- a/drivers/bluetooth/Makefile
> +++ b/drivers/bluetooth/Makefile
> @@ -25,6 +25,8 @@ obj-$(CONFIG_BT_BCM)		+= btbcm.o
>   obj-$(CONFIG_BT_RTL)		+= btrtl.o
>   obj-$(CONFIG_BT_QCA)		+= btqca.o
>   
> +obj-$(CONFIG_BT_HCIUART_NOKIA)	+= hci_nokia.o
> +
>   btmrvl-y			:= btmrvl_main.o
>   btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o

This does not build as module with following error:
ERROR: "hci_uart_tx_wakeup" [drivers/bluetooth/hci_nokia.ko] undefined!
ERROR: "hci_uart_register_device" [drivers/bluetooth/hci_nokia.ko] 
undefined!

Should not hci_nokia be part of the hci_uart module?

Regards,

Fred

Re: [PATCHv2 09/11] Bluetooth: add nokia driver

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 3029 bytes --]

Hi,

On Thu, Mar 23, 2017 at 08:50:42AM +0100, Frédéric Danis wrote:
> Le 21/03/2017 à 23:32, Sebastian Reichel a écrit :
> > This adds a driver for the Nokia H4+ protocol, which is used
> > at least on the Nokia N9, N900 & N950.
> > 
> > Signed-off-by: Sebastian Reichel <sre@kernel.org>
> > ---
> > Changes since PATCHv1:
> >   * replace __u8 and uint8_t with u8
> >   * replace __u16 and uint16_t with u16
> >   * drop BT_BAUDRATE_DIVIDER and use btdev->sysclk_speed * 10 instead
> >   * fix wording of a sentence
> >   * fix error path of negotation & alive package receive functions
> >   * replaced nokia_wait_for_cts with newly introduced serdev function
> >   * use "nokia,h4p-bluetooth" as compatible string
> > ---
> >   drivers/bluetooth/Kconfig     |  12 +
> >   drivers/bluetooth/Makefile    |   2 +
> >   drivers/bluetooth/hci_nokia.c | 819 ++++++++++++++++++++++++++++++++++++++++++
> >   3 files changed, 833 insertions(+)
> >   create mode 100644 drivers/bluetooth/hci_nokia.c
> > 
> > diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
> > index c2c14a12713b..2e3e4d3547ad 100644
> > --- a/drivers/bluetooth/Kconfig
> > +++ b/drivers/bluetooth/Kconfig
> > @@ -86,6 +86,18 @@ config BT_HCIUART_H4
> >   	  Say Y here to compile support for HCI UART (H4) protocol.
> > +config BT_HCIUART_NOKIA
> > +	tristate "UART Nokia H4+ protocol support"
> > +	depends on BT_HCIUART
> > +	depends on SERIAL_DEV_BUS
> > +	depends on PM
> > +	help
> > +	  Nokia H4+ is serial protocol for communication between Bluetooth
> > +	  device and host. This protocol is required for Bluetooth devices
> > +	  with UART interface in Nokia devices.
> > +
> > +	  Say Y here to compile support for Nokia's H4+ protocol.
> > +
> >   config BT_HCIUART_BCSP
> >   	bool "BCSP protocol support"
> >   	depends on BT_HCIUART
> > diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
> > index fd571689eed6..a7f237320f4b 100644
> > --- a/drivers/bluetooth/Makefile
> > +++ b/drivers/bluetooth/Makefile
> > @@ -25,6 +25,8 @@ obj-$(CONFIG_BT_BCM)		+= btbcm.o
> >   obj-$(CONFIG_BT_RTL)		+= btrtl.o
> >   obj-$(CONFIG_BT_QCA)		+= btqca.o
> > +obj-$(CONFIG_BT_HCIUART_NOKIA)	+= hci_nokia.o
> > +
> >   btmrvl-y			:= btmrvl_main.o
> >   btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
> 
> This does not build as module with following error:
> ERROR: "hci_uart_tx_wakeup" [drivers/bluetooth/hci_nokia.ko] undefined!
> ERROR: "hci_uart_register_device" [drivers/bluetooth/hci_nokia.ko]
> undefined!
> 
> Should not hci_nokia be part of the hci_uart module?

Yeah, I also received that from kbuild test robot after sending the
patchset. I intentionally did not add this to hci_uart, so that I can
use module_serdev_device_driver(). I think at least for serdev-only
based bluetooth drivers it makes sense to have them in their own module.
I already have added EXPORT_SYMBOL_GPL for those functions in the next
version of this patchset.

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCHv2 10/11] ARM: dts: N900: Add bluetooth

[Sebastian Reichel]

Add bcm2048 node and its system clock to the N900 device tree file.
Apart from that a reference to the new clock has been added to
wl1251 (which uses it, too).

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
Changes since PATCHv1:
 - update compatible string
---
 arch/arm/boot/dts/omap3-n900.dts | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b64cfda8dbb7..49f37084e435 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -155,6 +155,13 @@
 		compatible = "nokia,n900-ir";
 		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
 	};
+
+	/* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
+	vctcxo: vctcxo {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
 };
 
 &omap3_pmx_core {
@@ -162,8 +169,10 @@
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts */
 			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
 		>;
 	};
 
@@ -920,6 +929,8 @@
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+		clocks = <&vctcxo>;
 	};
 };
 
@@ -937,9 +948,17 @@
 };
 
 &uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
+
+	bcm2048: bluetooth {
+		compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
+		reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
+		host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+		bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+		clocks = <&vctcxo>;
+		clock-names = "sysclk";
+	};
 };
 
 &uart3 {
-- 
2.11.0

Re: [PATCHv2 10/11] ARM: dts: N900: Add bluetooth

[Rob Herring]

On Tue, Mar 21, 2017 at 5:32 PM, Sebastian Reichel <sre@kernel.org> wrote:
> Add bcm2048 node and its system clock to the N900 device tree file.
> Apart from that a reference to the new clock has been added to
> wl1251 (which uses it, too).
>
> Acked-by: Pavel Machek <pavel@ucw.cz>
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> ---
> Changes since PATCHv1:
>  - update compatible string
> ---
>  arch/arm/boot/dts/omap3-n900.dts | 23 +++++++++++++++++++++--
>  1 file changed, 21 insertions(+), 2 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCHv2 10/11] ARM: dts: N900: Add bluetooth

[Tony Lindgren]

* Rob Herring <robh+dt@kernel.org> [170322 14:09]:
> On Tue, Mar 21, 2017 at 5:32 PM, Sebastian Reichel <sre@kernel.org> wrote:
> > Add bcm2048 node and its system clock to the N900 device tree file.
> > Apart from that a reference to the new clock has been added to
> > wl1251 (which uses it, too).
> >
> > Acked-by: Pavel Machek <pavel@ucw.cz>
> > Signed-off-by: Sebastian Reichel <sre@kernel.org>
> > ---
> > Changes since PATCHv1:
> >  - update compatible string
> > ---
> >  arch/arm/boot/dts/omap3-n900.dts | 23 +++++++++++++++++++++--
> >  1 file changed, 21 insertions(+), 2 deletions(-)
> 
> Acked-by: Rob Herring <robh@kernel.org>

Picking patches 10 and 11 into omap-for-v4.12/dt-v2.

Regards,

Tony

[PATCHv2 11/11] ARM: dts: N9/N950: add bluetooth

[Sebastian Reichel]

The Nokia N950 and N9 have a wl1271 (with nokia bootloader) bluetooth
module connected to second UART.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
Changes since PATCHv1:
 - update compatible string
---
 arch/arm/boot/dts/omap3-n950-n9.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 5d8c4b4a4205..df3366fa5409 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -58,6 +58,13 @@
 			pinctrl-0 = <&debug_leds>;
 		};
 	};
+
+	/* controlled (enabled/disabled) directly by wl1271 */
+	vctcxo: vctcxo {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
 };
 
 &omap3_pmx_core {
@@ -125,6 +132,15 @@
 			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4)            /* gpio_93 (cmt_apeslpx) */
 		>;
 	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -435,3 +451,19 @@
 &ssi_port2 {
 	status = "disabled";
 };
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
+
+		reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */
+		host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+		bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+
+		clocks = <&vctcxo>;
+		clock-names = "sysclk";
+	};
+};
-- 
2.11.0

Re: [PATCHv2 11/11] ARM: dts: N9/N950: add bluetooth

[Rob Herring]

On Tue, Mar 21, 2017 at 5:32 PM, Sebastian Reichel <sre@kernel.org> wrote:
> The Nokia N950 and N9 have a wl1271 (with nokia bootloader) bluetooth
> module connected to second UART.
>
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> ---
> Changes since PATCHv1:
>  - update compatible string
> ---
>  arch/arm/boot/dts/omap3-n950-n9.dtsi | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>