From: Peter Robinson <pbrobinson@gmail.com>
To: Jeremy Linton <jeremy.linton@arm.com>
Cc: netdev@vger.kernel.org, opendmb@gmail.com, f.fainelli@gmail.com,
davem@davemloft.net, kuba@kernel.org,
bcm-kernel-feedback-list@broadcom.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] net: bcmgenet: Use stronger register read/writes to assure ordering
Date: Thu, 10 Mar 2022 17:29:22 +0000 [thread overview]
Message-ID: <CALeDE9OO8VfKbQ-Nz1LgPqZVUhvf-h3dRXSqXPJ=-LDUBR48Lw@mail.gmail.com> (raw)
In-Reply-To: <20220310045358.224350-1-jeremy.linton@arm.com>
On Thu, Mar 10, 2022 at 4:54 AM Jeremy Linton <jeremy.linton@arm.com> wrote:
>
> GCC12 appears to be much smarter about its dependency tracking and is
> aware that the relaxed variants are just normal loads and stores and
> this is causing problems like:
>
> [ 210.074549] ------------[ cut here ]------------
> [ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out
> [ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240
> [ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat]
> [ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110
> [ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58
> [ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters
> [ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022
> [ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 210.161358] pc : dev_watchdog+0x234/0x240
> [ 210.161364] lr : dev_watchdog+0x234/0x240
> [ 210.161368] sp : ffff8000080a3a40
> [ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20
> [ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08
> [ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000
> [ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff
> [ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a
> [ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0
> [ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c
> [ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000
> [ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000
> [ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044
> [ 210.269682] Call trace:
> [ 210.272133] dev_watchdog+0x234/0x240
> [ 210.275811] call_timer_fn+0x3c/0x15c
> [ 210.279489] __run_timers.part.0+0x288/0x310
> [ 210.283777] run_timer_softirq+0x48/0x80
> [ 210.287716] __do_softirq+0x128/0x360
> [ 210.291392] __irq_exit_rcu+0x138/0x140
> [ 210.295243] irq_exit_rcu+0x1c/0x30
> [ 210.298745] el1_interrupt+0x38/0x54
> [ 210.302334] el1h_64_irq_handler+0x18/0x24
> [ 210.306445] el1h_64_irq+0x7c/0x80
> [ 210.309857] arch_cpu_idle+0x18/0x2c
> [ 210.313445] default_idle_call+0x4c/0x140
> [ 210.317470] cpuidle_idle_call+0x14c/0x1a0
> [ 210.321584] do_idle+0xb0/0x100
> [ 210.324737] cpu_startup_entry+0x30/0x8c
> [ 210.328675] secondary_start_kernel+0xe4/0x110
> [ 210.333138] __secondary_switched+0x94/0x98
>
> The assumption when these were relaxed seems to be that device memory
> would be mapped non reordering, and that other constructs
> (spinlocks/etc) would provide the barriers to assure that packet data
> and in memory rings/queues were ordered with respect to device
> register reads/writes. This itself seems a bit sketchy, but the real
> problem with GCC12 is that it is moving the actual reads/writes around
> at will as though they were independent operations when in truth they
> are not, but the compiler can't know that. When looking at the
> assembly dumps for many of these routines its possible to see very
> clean, but not strictly in program order operations occurring as the
> compiler would be free to do if these weren't actually register
> reads/write operations.
>
> Its possible to suppress the timeout with a liberal bit of dma_mb()'s
> sprinkled around but the device still seems unable to reliably
> send/receive data. A better plan is to use the safer readl/writel
> everywhere.
>
> Since this partially reverts an older commit, which notes the use of
> the relaxed variants for performance reasons. I would suggest that
> any performance problems with this commit are targeted at relaxing only
> the performance critical code paths after assuring proper barriers.
>
> Fixes: 69d2ea9c79898 ("net: bcmgenet: Use correct I/O accessors")
> Reported-by: Peter Robinson <pbrobinson@gmail.com>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
This fixes the issue I'm seeing on Fedora.
> ---
> drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> index 87f1056e29ff..e907a2df299c 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> @@ -76,7 +76,7 @@ static inline void bcmgenet_writel(u32 value, void __iomem *offset)
> if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
> __raw_writel(value, offset);
> else
> - writel_relaxed(value, offset);
> + writel(value, offset);
> }
>
> static inline u32 bcmgenet_readl(void __iomem *offset)
> @@ -84,7 +84,7 @@ static inline u32 bcmgenet_readl(void __iomem *offset)
> if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
> return __raw_readl(offset);
> else
> - return readl_relaxed(offset);
> + return readl(offset);
> }
>
> static inline void dmadesc_set_length_status(struct bcmgenet_priv *priv,
> --
> 2.35.1
>
next prev parent reply other threads:[~2022-03-10 17:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-10 4:53 [PATCH] net: bcmgenet: Use stronger register read/writes to assure ordering Jeremy Linton
2022-03-10 17:29 ` Peter Robinson [this message]
2022-03-10 18:59 ` Florian Fainelli
2022-03-11 1:09 ` Jeremy Linton
2022-03-11 3:57 ` Florian Fainelli
2022-03-15 15:29 ` Peter Robinson
2022-03-18 19:01 ` Florian Fainelli
2022-03-18 19:20 ` Jakub Kicinski
2022-03-18 21:26 ` Florian Fainelli
2022-03-19 0:22 ` Jakub Kicinski
2022-03-18 19:04 ` Florian Fainelli
2022-03-21 21:26 ` Jakub Kicinski
2022-03-21 21:28 ` Florian Fainelli
2022-03-29 15:07 ` Peter Robinson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CALeDE9OO8VfKbQ-Nz1LgPqZVUhvf-h3dRXSqXPJ=-LDUBR48Lw@mail.gmail.com' \
--to=pbrobinson@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=jeremy.linton@arm.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=opendmb@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).