From: Bernd Eckenfels <usenet2001-12@lina.inka.de>
To: linux-kernel@vger.kernel.org
Subject: Re: Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help.
Date: Thu, 20 Dec 2001 20:49:28 +0100 [thread overview]
Message-ID: <E16H9C4-0005ST-00@sites.inka.de> (raw)
In-Reply-To: <200112201721.KAA05522@tstac.esa.lanl.gov>
In article <200112201721.KAA05522@tstac.esa.lanl.gov> you wrote:
> Eric has decided to follow the following standard:
> IEC 60027-2, Second edition, 2000-11,
> Letter symbols to be used in electrical technology -
> Part 2: Telecommunications and electronics.
> and has changed all the abbreviations for Kilobyte (KB) to KiB,
> Megabyte (MB) to MiB, etc, etc.
I did this for nettools (i.e. ifconfig), too:
RX bytes:2120660294 (1.9 GiB) TX bytes:341183013 (325.3 MiB)
man page:
Since net-tools 1.60-4 ifconfig is printing byte counters
with SI units. So 1 KiB are 2^10 byte. Note, the numbers
are truncated to one decimal (which can by quite a large
error if you consider 0.1 PiB is 112.589.990.684.262 bytes :)
...
SEE ALSO
route(8), netstat(8), arp(8), rarp(8), ipchains(8)
http://physics.nist.gov/cuu/Units/binary.html - Prefixes
for binary multiples
next prev parent reply other threads:[~2001-12-20 19:49 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-20 18:02 Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help Steven Cole
2001-12-20 18:16 ` Matt Bernstein
2001-12-20 18:42 ` Randolph Bentson
2001-12-20 19:00 ` Dave Jones
2001-12-20 19:07 ` Nicholas Knight
2001-12-20 18:47 ` Michael Dunsky
2001-12-20 19:00 ` Timothy Covell
2001-12-21 1:44 ` Stephen Satchell
2001-12-20 18:26 ` Robert Love
2001-12-20 18:52 ` Eric S. Raymond
2001-12-20 19:32 ` Steven Cole
2001-12-20 19:37 ` Eric S. Raymond
2001-12-20 20:40 ` Marc Schiffbauer
2001-12-20 20:32 ` Gábor Lénárt
2001-12-20 21:05 ` Richard B. Johnson
2001-12-20 21:14 ` Gábor Lénárt
2001-12-20 21:25 ` Andreas Dilger
2001-12-20 22:49 ` Mike Eldridge
2001-12-21 10:58 ` Mike Jagdis
2001-12-26 18:59 ` Riley Williams
2002-01-02 17:17 ` Jonathan Amery
2002-01-02 20:17 ` Timothy Covell
2002-01-03 4:23 ` Daniel Phillips
2002-01-03 15:46 ` Timothy Covell
2001-12-24 13:39 ` Lionel Bouton
2001-12-25 11:25 ` Pavel Machek
2001-12-25 20:14 ` Lionel Bouton
2001-12-20 19:49 ` Bernd Eckenfels [this message]
2001-12-22 10:24 ` Pozsar Balazs
2001-12-22 10:47 ` Phil Howard
2001-12-22 11:30 ` Bernd Eckenfels
2001-12-22 20:18 ` Pozsar Balazs
2001-12-23 5:39 ` Bernd Eckenfels
2001-12-24 13:21 ` Ian Molton
2001-12-22 16:03 ` Stephen Satchell
2001-12-23 10:43 ` David Woodhouse
2001-12-23 12:00 ` Vojtech Pavlik
2001-12-23 16:24 ` Stephen Satchell
2001-12-24 12:37 ` David Woodhouse
2001-12-28 10:25 ` Kai Henningsen
2001-12-20 19:13 Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.hel p Nicholas Knight
2001-12-20 19:41 ` Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help Mike Harrold
2001-12-21 16:59 ` Alan Cox
2001-12-21 17:50 ` Mike Harrold
2001-12-21 18:41 ` Kent Borg
2001-12-21 18:49 ` lk
2001-12-21 19:12 ` Kent Borg
2001-12-22 4:51 ` Albert D. Cahalan
2001-12-20 19:25 RaúlNúñez de Arenas Coronado
2001-12-20 21:41 ` Jamie Lokier
2001-12-21 23:05 ` Rob Landley
2001-12-21 11:44 Christian Groessler
2001-12-21 12:50 ` Rene Engelhard
2001-12-21 14:40 ` Reid Hekman
2001-12-21 14:48 ` Rene Engelhard
2001-12-26 19:04 ` Riley Williams
2001-12-21 15:48 ` Mike Jagdis
2001-12-21 16:07 ` Rene Engelhard
2001-12-21 17:43 ` Bob Glamm
2001-12-21 20:50 ` Andreas Ferber
2001-12-21 19:55 Per Jessen
[not found] ` <by>
2001-12-22 1:48 ` Timothy Covell
2001-12-22 4:32 ` H. Peter Anvin
2001-12-22 4:49 ` Timothy Covell
2001-12-22 7:57 ` Alan Cox
2001-12-22 18:22 ` Timothy Covell
2001-12-22 19:54 ` Derek Fawcus
2001-12-22 2:11 ` Timothy Covell
2001-12-22 4:44 ` H. Peter Anvin
2001-12-22 4:55 ` M. Edward (Ed) Borasky
2001-12-22 5:29 ` Ryan Cumming
2001-12-22 5:53 ` Timothy Covell
2001-12-22 22:41 ` Changing KB, MB, and GB to KiB, MiB, and GiB in?Configure.help Vojtech Pavlik
2001-12-22 10:53 ` Pekka Pietikäinen
2001-12-21 22:55 Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help Stuart Lynne
2001-12-22 2:51 Thomas Hood
2001-12-22 8:39 matthew david reuther
2002-01-08 21:18 ` Dr. Kelsey Hudson
2001-12-22 23:22 Per Jessen
2001-12-23 7:21 ` Nicholas Knight
2001-12-23 13:35 ` Alan Cox
2001-12-23 9:18 Per Jessen
2001-12-23 16:34 ` Stephen Satchell
2002-01-08 21:24 Changing KB, MB, and GB to KiB, MiB, and GiB =?iso-8859-1?q?in Configure=2Ehelp=2E?= Dr. Kelsey Hudson
2002-01-08 21:29 ` Changing KB, MB, and GB to KiB, MiB, and GiB in Configure.help H. Peter Anvin
2002-01-08 22:15 ` Dr. Kelsey Hudson
2002-01-08 23:03 ` Timothy Covell
2002-03-18 11:31 Nayyer Tiger
2002-03-18 16:12 ` Randy.Dunlap
2002-03-18 16:36 ` Richard B. Johnson
2002-03-18 13:53 ` Andreas Dilger
2002-03-18 17:38 ` Jakob Kemi
2002-03-18 18:24 ` H. Peter Anvin
2002-03-18 18:35 ` Rik van Riel
2002-03-18 19:00 ` Mike Dresser
2002-03-18 19:08 ` Rik van Riel
2002-03-18 19:31 ` Chris Friesen
2002-03-18 22:04 ` Mike Dresser
2002-03-18 22:12 ` Mike Dresser
2002-03-19 11:48 ` Remco Post
2002-03-18 17:04 ` Steven Cole
[not found] <Pine.LNX.4.33.0203181358540.25105-100000@router.windsormac hine.com>
2002-03-19 14:20 ` Pete Cervasio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E16H9C4-0005ST-00@sites.inka.de \
--to=usenet2001-12@lina.inka.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).