* [PATCH 0/3] Use mm_struct and switch_mm() instead of manually
@ 2017-12-17 0:05 Sai Praneeth Prakhya
2017-12-17 21:09 ` Bhupesh Sharma
0 siblings, 1 reply; 4+ messages in thread
From: Sai Praneeth Prakhya @ 2017-12-17 0:05 UTC (permalink / raw)
To: linux-efi, linux-kernel
Cc: Sai Praneeth, Lee, Chun-Yi, Borislav Petkov, Tony Luck,
Andy Lutomirski, Michael S. Tsirkin, Ricardo Neri, Matt Fleming,
Ard Biesheuvel, Ravi Shankar
From: Sai Praneeth <sai.praneeth.prakhya@intel.com>
Presently, in x86, to invoke any efi function like
efi_set_virtual_address_map() or any efi_runtime_service() the code path
typically involves read_cr3() (save previous pgd), write_cr3()
(write efi_pgd) and calling efi function. Likewise after returning from
efi function the code path typically involves read_cr3() (save efi_pgd),
write_cr3() (write previous pgd). We do this couple of times in efi
subsystem of Linux kernel, instead we can use helper function
efi_switch_mm() to do this. This improves readability and maintainability.
Also, instead of maintaining a separate struct "efi_scratch" to store/restore
efi_pgd, we can use mm_struct to do this.
I have tested this patch set against LUV (Linux UEFI Validation), so I
think I didn't break any existing configurations. I have tested this
patch set for
1. x86_64,
2. x86_32,
3. Mixed mode
with efi=old_map and for kexec kernel. Please let me know if I have
missed any other configurations.
Changes in V2:
1. Resolve mm_dropping() issue by not mm_dropping()/mm_grabbing() any mm,
as we are not losing/creating any references.
Changes in V3:
1. When CPUMASK_OFFSTACK is enabled, switch_mm_irqs_off() sets cpumask
by calling cpumask_set_cpu(). This panics kernel as efi_mm is not
initialized, therefore initialize efi_mm in efi_alloc_page_tables().
Note:
This patch set is based on Linus's tree v4.15-rc3
Sai Praneeth (3):
efi: Use efi_mm in x86 as well as ARM
x86/efi: Replace efi_pgd with efi_mm.pgd
x86/efi: Use efi_switch_mm() rather than manually twiddling with %cr3
arch/x86/include/asm/efi.h | 29 +++++++++---------
arch/x86/platform/efi/efi_64.c | 59 +++++++++++++++++++-----------------
arch/x86/platform/efi/efi_thunk_64.S | 2 +-
drivers/firmware/efi/arm-runtime.c | 9 ------
drivers/firmware/efi/efi.c | 9 ++++++
include/linux/efi.h | 2 ++
6 files changed, 57 insertions(+), 53 deletions(-)
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Lee, Chun-Yi <jlee@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
--
2.1.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 0/3] Use mm_struct and switch_mm() instead of manually
2017-12-17 0:05 [PATCH 0/3] Use mm_struct and switch_mm() instead of manually Sai Praneeth Prakhya
@ 2017-12-17 21:09 ` Bhupesh Sharma
2017-12-19 6:23 ` Prakhya, Sai Praneeth
0 siblings, 1 reply; 4+ messages in thread
From: Bhupesh Sharma @ 2017-12-17 21:09 UTC (permalink / raw)
To: Sai Praneeth Prakhya
Cc: linux-efi, linux-kernel, Lee, Chun-Yi, Borislav Petkov,
Tony Luck, Andy Lutomirski, Michael S. Tsirkin, Ricardo Neri,
Matt Fleming, Ard Biesheuvel, Ravi Shankar
Hi Sai,
On Sun, Dec 17, 2017 at 5:35 AM, Sai Praneeth Prakhya
<sai.praneeth.prakhya@intel.com> wrote:
> From: Sai Praneeth <sai.praneeth.prakhya@intel.com>
>
> Presently, in x86, to invoke any efi function like
> efi_set_virtual_address_map() or any efi_runtime_service() the code path
> typically involves read_cr3() (save previous pgd), write_cr3()
> (write efi_pgd) and calling efi function. Likewise after returning from
> efi function the code path typically involves read_cr3() (save efi_pgd),
> write_cr3() (write previous pgd). We do this couple of times in efi
> subsystem of Linux kernel, instead we can use helper function
> efi_switch_mm() to do this. This improves readability and maintainability.
> Also, instead of maintaining a separate struct "efi_scratch" to store/restore
> efi_pgd, we can use mm_struct to do this.
>
> I have tested this patch set against LUV (Linux UEFI Validation), so I
> think I didn't break any existing configurations. I have tested this
> patch set for
> 1. x86_64,
> 2. x86_32,
> 3. Mixed mode
> with efi=old_map and for kexec kernel. Please let me know if I have
> missed any other configurations.
>
> Changes in V2:
> 1. Resolve mm_dropping() issue by not mm_dropping()/mm_grabbing() any mm,
> as we are not losing/creating any references.
>
> Changes in V3:
> 1. When CPUMASK_OFFSTACK is enabled, switch_mm_irqs_off() sets cpumask
> by calling cpumask_set_cpu(). This panics kernel as efi_mm is not
> initialized, therefore initialize efi_mm in efi_alloc_page_tables().
Thanks for the v3.
I confirmed that the issue I saw with the v2 when I enabled
'efi=debug' on the sgi-uv 300 machine (i.e the NULL pointer access
while accessing mm_cpumask(next), in the function call
'switch_mm_irqs_off') is fixed in the v3.
Also as I noted during the v2 review, introducing the 'efi_switch_mm()
' helper instead of manually
twiddling with %cr3 seems more cleaner (having personally debugged
this leg several times on the underlying x86 EFI machines).
So in addition to me testing this on the sgi-uv300 and Dell Optiplex
EFI enabled machine, please feel free to add:
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Thanks,
Bhupesh
> Note:
> This patch set is based on Linus's tree v4.15-rc3
>
> Sai Praneeth (3):
> efi: Use efi_mm in x86 as well as ARM
> x86/efi: Replace efi_pgd with efi_mm.pgd
> x86/efi: Use efi_switch_mm() rather than manually twiddling with %cr3
>
> arch/x86/include/asm/efi.h | 29 +++++++++---------
> arch/x86/platform/efi/efi_64.c | 59 +++++++++++++++++++-----------------
> arch/x86/platform/efi/efi_thunk_64.S | 2 +-
> drivers/firmware/efi/arm-runtime.c | 9 ------
> drivers/firmware/efi/efi.c | 9 ++++++
> include/linux/efi.h | 2 ++
> 6 files changed, 57 insertions(+), 53 deletions(-)
>
> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
> Cc: Lee, Chun-Yi <jlee@suse.com>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: Tony Luck <tony.luck@intel.com>
> Cc: Andy Lutomirski <luto@kernel.org>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Ricardo Neri <ricardo.neri@intel.com>
> Cc: Matt Fleming <matt@codeblueprint.co.uk>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Ravi Shankar <ravi.v.shankar@intel.com>
> Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
>
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-efi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH 0/3] Use mm_struct and switch_mm() instead of manually
2017-12-17 21:09 ` Bhupesh Sharma
@ 2017-12-19 6:23 ` Prakhya, Sai Praneeth
0 siblings, 0 replies; 4+ messages in thread
From: Prakhya, Sai Praneeth @ 2017-12-19 6:23 UTC (permalink / raw)
To: Bhupesh Sharma
Cc: linux-efi, linux-kernel, Lee, Chun-Yi, Borislav Petkov, Luck,
Tony, Andy Lutomirski, Michael S. Tsirkin, Neri, Ricardo,
Matt Fleming, Ard Biesheuvel, Shankar, Ravi V
> > Changes in V3:
> > 1. When CPUMASK_OFFSTACK is enabled, switch_mm_irqs_off() sets cpumask
> > by calling cpumask_set_cpu(). This panics kernel as efi_mm is not
> > initialized, therefore initialize efi_mm in efi_alloc_page_tables().
>
> Thanks for the v3.
>
> I confirmed that the issue I saw with the v2 when I enabled 'efi=debug' on the
> sgi-uv 300 machine (i.e the NULL pointer access while accessing
> mm_cpumask(next), in the function call
> 'switch_mm_irqs_off') is fixed in the v3.
>
> Also as I noted during the v2 review, introducing the 'efi_switch_mm() ' helper
> instead of manually twiddling with %cr3 seems more cleaner (having personally
> debugged this leg several times on the underlying x86 EFI machines).
>
> So in addition to me testing this on the sgi-uv300 and Dell Optiplex EFI enabled
> machine, please feel free to add:
>
> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
>
Hi Bhupesh,
Thanks for the review and re-iterating the usefulness of this patch set.
Regards,
Sai
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 0/3] Use mm_struct and switch_mm() instead of manually
@ 2017-08-15 19:18 Sai Praneeth Prakhya
0 siblings, 0 replies; 4+ messages in thread
From: Sai Praneeth Prakhya @ 2017-08-15 19:18 UTC (permalink / raw)
To: linux-efi, linux-kernel
Cc: jlee, bp, luto, mst, ricardo.neri, matt, ard.biesheuvel,
ravi.v.shankar, Sai Praneeth
From: Sai Praneeth <sai.praneeth.prakhya@intel.com>
Presently, in x86, to invoke any efi function like
efi_set_virtual_address_map() or any efi_runtime_service() the code path
typically involves read_cr3() (save previous pgd), write_cr3()
(write efi_pgd) and calling efi function. Likewise after returning from
efi function the code path typically involves read_cr3() (save efi_pgd),
write_cr3() (write previous pgd). We do this couple of times in efi
subsystem of Linux kernel, so we can use a function (efi_switch_mm())
to do this. This improves readability and maintainability. Also, instead
of maintaining a separate struct "efi_scratch" to store/restore efi_pgd,
we can use mm_struct to do this.
I have tested this patch set against LUV, so I think I didn't break
any existing configurations. I have tested this patch set for
1. x86_64,
2. x86_32,
3. Mixed mode
with efi=old_map and for kexec kernel. Please let me know if I have
missed any other configurations.
Special thanks to Matt for his initial review.
Matt,
I have implemented efi_switch_mm() in "arch/x86/platform/efi/efi_64.c"
because it's used only by x86_64. Please let me know if you think it
should be in "drivers/firmware/efi/efi.c"
Andy and Michael,
As I am twiddling with memory management for the first time and I think
you are mm experts, could you please review efi_switch_mm() function
in "x86/efi: Use efi_switch_mm() rather than manually twiddling with cr3"
Sai Praneeth (3):
efi: Use efi_mm in x86 as well as ARM
x86/efi: Replace efi_pgd with efi_mm.pgd
x86/efi: Use efi_switch_mm() rather than manually twiddling with cr3
arch/x86/include/asm/efi.h | 30 +++++++++----------
arch/x86/platform/efi/efi_64.c | 57 ++++++++++++++++++++++--------------
arch/x86/platform/efi/efi_thunk_64.S | 2 +-
drivers/firmware/efi/arm-runtime.c | 9 ------
drivers/firmware/efi/efi.c | 9 ++++++
include/linux/efi.h | 2 ++
6 files changed, 62 insertions(+), 47 deletions(-)
--
2.1.4
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-12-19 6:23 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-17 0:05 [PATCH 0/3] Use mm_struct and switch_mm() instead of manually Sai Praneeth Prakhya
2017-12-17 21:09 ` Bhupesh Sharma
2017-12-19 6:23 ` Prakhya, Sai Praneeth
-- strict thread matches above, loose matches on Subject: below --
2017-08-15 19:18 Sai Praneeth Prakhya
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).