From: "Maciej W. Rozycki" <macro@ds2.pg.gda.pl>
To: Andries Brouwer <aebr@win.tue.nl>
Cc: Vojtech Pavlik <vojtech@suse.cz>,
Jamie Lokier <jamie@shareable.org>,
Neil Brown <neilb@cse.unsw.edu.au>,
linux-kernel@vger.kernel.org
Subject: Re: Input issues - key down with no key up
Date: Thu, 21 Aug 2003 17:03:33 +0200 (MET DST) [thread overview]
Message-ID: <Pine.GSO.3.96.1030821164926.2489M-100000@delta.ds2.pg.gda.pl> (raw)
In-Reply-To: <20030821164435.B3518@pclin040.win.tue.nl>
On Thu, 21 Aug 2003, Andries Brouwer wrote:
> > Hmm, that would make some sense, but how does it work when an external
> > keyboard is attached?
>
> Usually the keyboard and mouse commands are sent to all attached
> keyboards resp. mice. Thus, with an internal keyboard that only
> knows about Set 2 and an external keyboard that also knows about
> Set 3 you can change the kbds to Set 3. Now the internal one is
> dead, but the external one functions.
I meant: how does the translation work if there is only a single onboard
controller that does scanning of the embedded keyboard and presents set #1
of codes directly? But after a bit of thinking I suppose it does support
translation for an external keyboard (which presents set #2 by default and
a lot of PC software expects set #1) and probably a pass-through mode for
it as well.
What the big fault of all these limited implementations is, there is no
reliable way to query what is supported. If a device does not support
mode switching or a particular mode, it should NAK a command that does it,
or at least report the original mode if queried afterwards. Another
possibility is to return a different device ID -- IBM chose a single value
of 256 possible for its PS/2 keyboards -- why couldn't the incompatible
others have chosen something different, sigh?...
--
+ Maciej W. Rozycki, Technical University of Gdansk, Poland +
+--------------------------------------------------------------+
+ e-mail: macro@ds2.pg.gda.pl, PGP key available +
next prev parent reply other threads:[~2003-08-21 15:03 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-15 5:16 Input issues - key down with no key up Neil Brown
2003-08-15 7:46 ` Andries Brouwer
2003-08-15 10:58 ` Vojtech Pavlik
2003-08-15 12:36 ` Andries Brouwer
2003-08-15 12:43 ` Vojtech Pavlik
2003-08-15 13:27 ` Jamie Lokier
2003-08-15 13:52 ` Vojtech Pavlik
2003-08-15 14:02 ` Jamie Lokier
2003-08-15 15:05 ` Jason Lunz
2003-08-15 13:04 ` Jamie Lokier
2003-08-15 13:10 ` Vojtech Pavlik
2003-08-15 13:33 ` Jamie Lokier
2003-08-15 13:53 ` Vojtech Pavlik
2003-08-16 13:02 ` Maciej W. Rozycki
2003-08-16 14:09 ` Jamie Lokier
2003-08-17 21:54 ` Vojtech Pavlik
2003-08-18 12:22 ` Maciej W. Rozycki
2003-08-18 10:29 ` Andries Brouwer
2003-08-19 13:04 ` Maciej W. Rozycki
2003-08-19 17:48 ` Andries Brouwer
2003-08-21 11:37 ` Maciej W. Rozycki
2003-08-21 12:44 ` Andries Brouwer
2003-08-21 13:45 ` Maciej W. Rozycki
2003-08-21 14:28 ` Andries Brouwer
2003-08-21 14:38 ` Maciej W. Rozycki
2003-08-21 13:48 ` Jamie Lokier
2003-08-21 14:08 ` Maciej W. Rozycki
2003-08-21 14:14 ` Vojtech Pavlik
2003-08-21 14:33 ` Maciej W. Rozycki
2003-08-21 14:44 ` Andries Brouwer
2003-08-21 15:03 ` Maciej W. Rozycki [this message]
2003-08-21 15:29 ` Vojtech Pavlik
2003-08-16 13:01 ` Maciej W. Rozycki
2003-08-15 12:46 ` Neil Brown
2003-08-15 12:54 ` Vojtech Pavlik
2003-08-15 13:52 ` Andries Brouwer
2003-08-15 14:13 ` Vojtech Pavlik
2003-08-16 7:57 ` Neil Brown
2003-08-18 16:01 ` Vojtech Pavlik
2003-08-19 11:40 ` Neil Brown
2003-08-19 11:50 ` Vojtech Pavlik
2003-08-19 23:59 ` Neil Brown
2003-08-20 22:36 ` Andries Brouwer
2003-08-20 22:58 ` Jamie Lokier
2003-08-20 23:52 ` Andries Brouwer
2003-08-21 0:03 ` Jamie Lokier
2003-08-21 0:33 ` Andries Brouwer
2003-08-21 1:36 ` Jamie Lokier
2003-08-21 8:08 ` Vojtech Pavlik
2003-08-21 8:06 ` Vojtech Pavlik
2003-08-21 11:40 ` Maciej W. Rozycki
2003-08-21 12:48 ` Andries Brouwer
2003-08-21 13:22 ` Jamie Lokier
2003-08-21 13:29 ` Maciej W. Rozycki
2003-08-21 8:01 ` Vojtech Pavlik
2003-08-22 0:27 ` Andries Brouwer
2003-08-22 7:33 ` Vojtech Pavlik
2003-08-25 4:22 ` Jamie Lokier
2003-08-25 8:22 ` Vojtech Pavlik
2003-08-25 19:36 ` Jamie Lokier
2003-09-03 8:06 ` Pavel Machek
2003-08-22 13:35 ` Maciej W. Rozycki
2003-08-16 15:15 John Bradford
2003-08-18 11:53 ` Maciej W. Rozycki
2003-08-19 19:37 John Bradford
2003-08-19 23:58 ` Jamie Lokier
2003-08-20 5:59 John Bradford
2003-08-20 15:17 ` Jamie Lokier
2003-08-21 12:11 John Bradford
2003-08-21 12:26 ` Vojtech Pavlik
2003-08-23 12:30 Norman Diamond
2003-08-25 4:24 ` Jamie Lokier
2003-08-25 12:15 ` Norman Diamond
2003-08-25 8:45 John Bradford
2003-08-25 12:47 John Bradford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.GSO.3.96.1030821164926.2489M-100000@delta.ds2.pg.gda.pl \
--to=macro@ds2.pg.gda.pl \
--cc=aebr@win.tue.nl \
--cc=jamie@shareable.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@cse.unsw.edu.au \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).