* FBdev updates.
@ 2003-02-20 1:09 James Simmons
2003-02-20 1:17 ` Jeff Garzik
` (2 more replies)
0 siblings, 3 replies; 37+ messages in thread
From: James Simmons @ 2003-02-20 1:09 UTC (permalink / raw)
To: Linux Kernel Mailing List; +Cc: Linux Fbdev development list
New updates to the fbdev layer. You can grab the diff from
http://phoenix.infradead.org/~jsimmons/fbdev.diff.gz
or do a pull
bk pull http://gkernel.bkbits.net/fbdev-2.5
This will update the following files:
drivers/video/maxinefb.h | 37
drivers/video/pm2fb.h | 218 ---
drivers/video/pm3fb.h | 1284 --------------------
drivers/video/pmag-ba-fb.h | 24
drivers/video/pmagb-b-fb.h | 32
drivers/video/sstfb.h | 355 -----
arch/mips64/Kconfig | 4
arch/ppc/syslib/prom.c | 3
arch/ppc/syslib/prom_init.c | 28
arch/ppc64/kernel/prom.c | 27
drivers/char/vt.c | 8
drivers/video/Kconfig | 17
drivers/video/Makefile | 3
drivers/video/aty/atyfb.h | 86 -
drivers/video/aty/atyfb_base.c | 1804 ++++++++++++++---------------
drivers/video/aty/mach64_accel.c | 51
drivers/video/aty/mach64_ct.c | 356 +++--
drivers/video/aty/mach64_cursor.c | 4
drivers/video/aty/mach64_gx.c | 18
drivers/video/aty128fb.c | 162 +-
drivers/video/cfbcopyarea.c | 42
drivers/video/cfbfillrect.c | 12
drivers/video/cfbimgblt.c | 100 -
drivers/video/console/fbcon.c | 333 -----
drivers/video/console/fbcon.h | 3
drivers/video/console/newport_con.c | 69 -
drivers/video/console/vgacon.c | 673 +++++-----
drivers/video/fbmem.c | 306 ++--
drivers/video/fbmon.c | 3
drivers/video/hgafb.c | 9
drivers/video/i810/i810.h | 9
drivers/video/i810/i810_accel.c | 150 +-
drivers/video/i810/i810_main.c | 486 ++-----
drivers/video/i810/i810_main.h | 14
drivers/video/logo/Kconfig | 67 +
drivers/video/logo/Makefile | 27
drivers/video/logo/logo.c | 100 +
drivers/video/logo/logo_dec_clut224.ppm | 1603 +++++++++++++++++++++++++
drivers/video/logo/logo_linux_clut224.ppm | 1603 +++++++++++++++++++++++++
drivers/video/logo/logo_linux_mono.pbm | 202 +++
drivers/video/logo/logo_linux_vga16.ppm | 1603 +++++++++++++++++++++++++
drivers/video/logo/logo_mac_clut224.ppm | 1603 +++++++++++++++++++++++++
drivers/video/logo/logo_parisc_clut224.ppm | 1603 +++++++++++++++++++++++++
drivers/video/logo/logo_sgi_clut224.ppm | 1603 +++++++++++++++++++++++++
drivers/video/logo/logo_sun_clut224.ppm | 1603 +++++++++++++++++++++++++
drivers/video/logo/logo_superh_clut224.ppm | 1603 +++++++++++++++++++++++++
drivers/video/logo/logo_superh_mono.pbm | 202 +++
drivers/video/logo/logo_superh_vga16.ppm | 1603 +++++++++++++++++++++++++
drivers/video/maxinefb.c | 2
drivers/video/modedb.c | 8
drivers/video/neofb.c | 81 -
drivers/video/pm2fb.c | 2
drivers/video/pm3fb.c | 3
drivers/video/pmag-ba-fb.c | 2
drivers/video/pmagb-b-fb.c | 2
drivers/video/radeonfb.c | 1
drivers/video/riva/fbdev.c | 323 ++---
drivers/video/riva/nv_driver.c | 156 ++
drivers/video/riva/rivafb.h | 2
drivers/video/sgivwfb.c | 192 ++-
drivers/video/skeletonfb.c | 6
drivers/video/sstfb.c | 14
drivers/video/tdfxfb.c | 6
drivers/video/tgafb.c | 2
drivers/video/tridentfb.c | 2
drivers/video/vga16fb.c | 127 +-
include/linux/fb.h | 19
include/linux/linux_logo.h | 1435 -----------------------
include/video/mach64.h | 61
include/video/maxinefb.h | 37
include/video/pm3fb.h | 1284 ++++++++++++++++++++
include/video/pmag-ba-fb.h | 24
include/video/pmagb-b-fb.h | 32
include/video/sgivw.h | 40
include/video/sstfb.h | 355 +++++
include/video/vga.h | 16
scripts/Makefile | 4
scripts/pnmtologo |binary
scripts/pnmtologo.c | 498 ++++++++
79 files changed, 20264 insertions(+), 6227 deletions(-)
through these ChangeSets:
<jsimmons@maxwell.earthlink.net> (03/02/19 1.913.1.3)
[FBDEEV] Need to add support to build pnmtologo.
<jsimmons@maxwell.earthlink.net> (03/02/19 1.913.1.1)
Removed obsolete functions in fbcon.c and re-enabled mapping console(s) to a framebuffer device. A few compile fixes for rivafb and using standard macros for vgacon.c.
<jsimmons@maxwell.earthlink.net> (03/02/16 1.913)
[FBDEV] Data in struct fb_image is now const.
[FBDEV] Updates to the logo code. We seperated it into two functions.
[I810 FBDEV] Updates to the driver. PCI hooks for PCI supsend and resume to save the AGP GART mapping during power saving.
[ATY 128] Add proper support for two graphics cards. Also added support for two more models of the Rage 128.
[SGIVW FBDEV] Updates for the SGI Visual Workstation framebuffer.
<jsimmons@maxwell.earthlink.net> (03/02/13 1.910)
[LOGO] New better logo code.
[FBDEV] Moved a few more header files.
<jsimmons@maxwell.earthlink.net> (03/02/11 1.909)
[FBCON] Removal of useless code.
<jsimmons@maxwell.earthlink.net> (03/02/11 1.906)
[ATY FBDEV] Reversed mobilty patches. They busted every other card.
<jsimmons@maxwell.earthlink.net> (03/02/09 1.900)
[ATY FBDEV] Updates to support Rage Mobility Chipstes.
<jsimmons@maxwell.earthlink.net> (03/01/30 1.899)
[RIVA FBDEV] SUpprot Directcolor mode. Needed for some cards.
<jsimmons@kozmo.(none)> (03/01/28 1.897)
[NEOMAGIC FBDEV] Fix to work with no 21xx versions of the chip.
<jsimmons@maxwell.earthlink.net> (03/01/28 1.889.52.3)
[RADEON FBDEV] Add cursor support. Now the cursor is back.
[RIVA FBDEV] Added support for interlace mode and are now using TRUECOLOR instead of DIRECTCOLOR. Setting the graphics card in DIRECTCOLOR confusses the X server.
<jsimmons@maxwell.earthlink.net> (03/01/26 1.889.52.2)
Accel rountines pass in constant data into each function. The reason being was some of the code in the upper layers depended on the data being passed to the low level function not be altered because the upper layers was altering the data themselves.
Pan display fix for fbcon.c. p->vrow needed to be updated.
PPC build fix for fbmon.c
I810 fbdev updates.
<jsimmons@maxwell.earthlink.net> (03/01/17 1.889.52.1)
[GENERIC ACCELERATION] Fixed the generic image drawing function tfor 64 bit machines.
[RIVA FBDEV] The cursor and imageblit functions have been fixed.
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: FBdev updates.
2003-02-20 1:09 FBdev updates James Simmons
@ 2003-02-20 1:17 ` Jeff Garzik
2003-02-20 1:22 ` James Simmons
2003-02-20 15:02 ` Dave Jones
2003-02-20 15:10 ` FBdev updates Ivan Kokshaysky
2 siblings, 1 reply; 37+ messages in thread
From: Jeff Garzik @ 2003-02-20 1:17 UTC (permalink / raw)
To: James Simmons; +Cc: Linux Kernel Mailing List, Linux Fbdev development list
James Simmons wrote:
> New updates to the fbdev layer. You can grab the diff from
>
> http://phoenix.infradead.org/~jsimmons/fbdev.diff.gz
>
> or do a pull
>
> bk pull http://gkernel.bkbits.net/fbdev-2.5
You need to fix your script...
I do not think you posted your BK repo at "gkernel" ;-)
Jeff
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: FBdev updates.
2003-02-20 1:09 FBdev updates James Simmons
2003-02-20 1:17 ` Jeff Garzik
@ 2003-02-20 15:02 ` Dave Jones
2003-02-20 15:07 ` James Simmons
2003-02-20 18:29 ` Petr Vandrovec
2003-02-20 15:10 ` FBdev updates Ivan Kokshaysky
2 siblings, 2 replies; 37+ messages in thread
From: Dave Jones @ 2003-02-20 15:02 UTC (permalink / raw)
To: James Simmons; +Cc: Linux Kernel Mailing List, Linux Fbdev development list
On Thu, Feb 20, 2003 at 01:09:33AM +0000, James Simmons wrote:
> New updates to the fbdev layer. You can grab the diff from
> http://phoenix.infradead.org/~jsimmons/fbdev.diff.gz
James,
Whats the current status with matroxfb ? Its been broken
for months now, and hasn't seen any progress wrt getting it
back on its feet.
I understand Petr had some concerns with the new API, but
*something* needs to be done to get this back up and running.
I'd understand if this was a neglected hardly-used-by-anyone
driver, but there's an awful lot of matrox cards out there.
This was first reported broken way back in 2.5.53, but I believe
was broken even longer before that.
Dave
--
| Dave Jones. http://www.codemonkey.org.uk
| SuSE Labs
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: FBdev updates.
2003-02-20 15:02 ` Dave Jones
@ 2003-02-20 15:07 ` James Simmons
2003-02-20 18:29 ` Petr Vandrovec
1 sibling, 0 replies; 37+ messages in thread
From: James Simmons @ 2003-02-20 15:07 UTC (permalink / raw)
To: Dave Jones; +Cc: Linux Kernel Mailing List, Linux Fbdev development list
> James,
> Whats the current status with matroxfb ? Its been broken
> for months now, and hasn't seen any progress wrt getting it
> back on its feet.
>
> I understand Petr had some concerns with the new API, but
> *something* needs to be done to get this back up and runn
I have a newer driver but its not finished. The last month I
have focused on finding work instead.
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: FBdev updates.
2003-02-20 15:02 ` Dave Jones
2003-02-20 15:07 ` James Simmons
@ 2003-02-20 18:29 ` Petr Vandrovec
2003-02-20 19:03 ` Jurriaan
` (2 more replies)
1 sibling, 3 replies; 37+ messages in thread
From: Petr Vandrovec @ 2003-02-20 18:29 UTC (permalink / raw)
To: Dave Jones, James Simmons, Linux Kernel Mailing List,
Linux Fbdev development list
On Thu, Feb 20, 2003 at 03:02:01PM +0000, Dave Jones wrote:
> On Thu, Feb 20, 2003 at 01:09:33AM +0000, James Simmons wrote:
>
> > New updates to the fbdev layer. You can grab the diff from
> > http://phoenix.infradead.org/~jsimmons/fbdev.diff.gz
>
> James,
> Whats the current status with matroxfb ? Its been broken
> for months now, and hasn't seen any progress wrt getting it
> back on its feet.
>
> I understand Petr had some concerns with the new API, but
> *something* needs to be done to get this back up and running.
>
> I'd understand if this was a neglected hardly-used-by-anyone
> driver, but there's an awful lot of matrox cards out there.
>
> This was first reported broken way back in 2.5.53, but I believe
> was broken even longer before that.
Since 2.5.51, when rewrite came in...
You can get patch which reverts most of James's work at
ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.5.59.gz.
I was for five weeks in U.S., so I did not do anything with
matroxfb during that time. I plan to use fillrect and copyrect
from generic code (although it means unnecessary multiply on
generic side, and division in matroxfb, but well, if we gave
up on reasonable speed for fbdev long ago...). But I simply
want loadfont and putcs hooks for character painting. And if
fbdev maintainer does not want to give me them, well, then
matroxfb and fbdev are not compatible.
I refuse to remove features from matroxfb driver, and textmode
support is one of current features (needed and required to be
able to run VMware on fullscreen - and as main part of my
job happens in VMware...). So there is couple of choices:
(1) new maintainer, or
(2) remove matroxfb from kernel, or
(3) persuade me that I want to write matroxcon and forget about fbcon at all, or
(4) something else I do not know about.
Besides that with that strange additional copy in accel_putcs
I get much slower output than with 2.4.x... and although I
understand that for 2.6.x we'll all have faster computers than
we had for 2.4.x, I still think that speed should be primary
concern, and code extensibility and readability secondary.
But well, I told it dozens of time, so why I bother. I do
not want to end up as Larry.
Petr Vandrovec
vandrove@vc.cvut.cz
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: FBdev updates.
2003-02-20 18:29 ` Petr Vandrovec
@ 2003-02-20 19:03 ` Jurriaan
2003-02-20 19:58 ` James Simmons
2003-02-21 0:24 ` Antonino Daplas
2 siblings, 0 replies; 37+ messages in thread
From: Jurriaan @ 2003-02-20 19:03 UTC (permalink / raw)
To: linux-kernel
From: Petr Vandrovec <vandrove@vc.cvut.cz>
Date: Thu, Feb 20, 2003 at 10:29:41AM -0800
>
> You can get patch which reverts most of James's work at
> ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.5.59.gz.
>
For the record, this patch applies cleanly against 2.5.62, and I have a
very nice 1600x1200 framebuffer here right now. With the 12x22 font,
that means 133x54 - one of the biggest plusses of Linux for me.
Jurriaan
--
Perennial nuisance Charlton Heston pops up to declare that there are
"too many people on the Earth as it is" and one realizes instantly that as
president of the NRA, he is doing his best to correct that.
Tom Shales, The Washington Post
GNU/Linux 2.5.62 SMP/ReiserFS 2x2793 bogomips load av: 0.07 0.31 0.44
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: FBdev updates.
2003-02-20 18:29 ` Petr Vandrovec
2003-02-20 19:03 ` Jurriaan
@ 2003-02-20 19:58 ` James Simmons
2003-02-20 22:00 ` [Linux-fbdev-devel] " Antonino Daplas
2003-02-21 1:45 ` David S. Miller
2003-02-21 0:24 ` Antonino Daplas
2 siblings, 2 replies; 37+ messages in thread
From: James Simmons @ 2003-02-20 19:58 UTC (permalink / raw)
To: Petr Vandrovec
Cc: Dave Jones, Linux Kernel Mailing List, Linux Fbdev development list
> I was for five weeks in U.S., so I did not do anything with
> matroxfb during that time. I plan to use fillrect and copyrect
> from generic code
I have ported the accelerated functions to the new api. What is left is to
deal with the loadfont and putcs issue which I'm working on the code right
now.
> (although it means unnecessary multiply on
> generic side, and division in matroxfb,
????
> but well, if we gave
> up on reasonable speed for fbdev long ago...).
This is not true. Several benchmarks have shown a large performance
improvement in 2.5.X.
> But I simply
> want loadfont and putcs hooks for character painting. And if
> fbdev maintainer does not want to give me them, well, then
> matroxfb and fbdev are not compatible.
Working on it. I starting with Tony's tileblit patch but I plan to expand
it even more i.e texture maps to draw fonts.
> (3) persuade me that I want to write matroxcon and forget about fbcon at all, or
This is the best solution.
> Besides that with that strange additional copy in accel_putcs
> I get much slower output than with 2.4.x... and although I
Again not true.
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-02-20 19:58 ` James Simmons
@ 2003-02-20 22:00 ` Antonino Daplas
2003-02-21 9:09 ` Geert Uytterhoeven
2003-02-21 1:45 ` David S. Miller
1 sibling, 1 reply; 37+ messages in thread
From: Antonino Daplas @ 2003-02-20 22:00 UTC (permalink / raw)
To: James Simmons
Cc: Petr Vandrovec, Dave Jones, Linux Kernel Mailing List,
Linux Fbdev development list
On Fri, 2003-02-21 at 03:58, James Simmons wrote:
>
> > I was for five weeks in U.S., so I did not do anything with
> > matroxfb during that time. I plan to use fillrect and copyrect
> > from generic code
>
> I have ported the accelerated functions to the new api. What is left is to
> deal with the loadfont and putcs issue which I'm working on the code right
> now.
>
> > (although it means unnecessary multiply on
> > generic side, and division in matroxfb,
>
> ????
>
> > but well, if we gave
> > up on reasonable speed for fbdev long ago...).
>
> This is not true. Several benchmarks have shown a large performance
> improvement in 2.5.X.
>
2.5.x might be a bit slower with bpp8 but at higher color depths is
significantly faster. And this is done with a single generic color
exapnd function that replaces the entire fbcon-cfb*.c in 2.4. And it
will theoretically still draw correctly whatever the condition is (any
bpp from 1-32, unaligned origin, pitch, width, etc).
Drivers with accelerated color expansion, if done correctly, _should_
perform better whatever the color depth.
However, using fonts with widths not divisible by 8 will be several
folds slower. This should be helped if we add some form of tile/texture
blitting support to fbdev.
Note: I cannot test with 12x22 fonts in 2.4 because some/most drivers do
not support it.
Tony
no accel
scrollmode: yredraw
font: 8x16
visual: packed pixels
time cat /usr/src/linux/MAINTAINERS
linux-2.4.20
bpp8
----
real 0m2.499s
user 0m0.000s
sys 0m2.500s
bpp16
-----
real 0m8.324s
user 0m0.000s
sys 0m8.320s
bpp24
-----
real 0m12.364s
user 0m0.000s
sys 0m12.370s
bpp32
-----
real 0m16.274s
user 0m0.000s
sys 0m16.280s
linux-2.5.62
bpp8
----
real 0m2.557s
user 0m0.003s
sys 0m2.553s
bpp16
-----
real 0m4.051s
user 0m0.002s
sys 0m4.050s
bpp24
-----
real 0m9.520s
user 0m0.000s
sys 0m9.520s
bpp32
-----
real 0m7.496s
user 0m0.002s
sys 0m7.494s
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-02-20 22:00 ` [Linux-fbdev-devel] " Antonino Daplas
@ 2003-02-21 9:09 ` Geert Uytterhoeven
2003-02-21 10:46 ` Antonino Daplas
0 siblings, 1 reply; 37+ messages in thread
From: Geert Uytterhoeven @ 2003-02-21 9:09 UTC (permalink / raw)
To: Antonino Daplas
Cc: James Simmons, Petr Vandrovec, Dave Jones,
Linux Kernel Mailing List, Linux Fbdev development list
On 21 Feb 2003, Antonino Daplas wrote:
> Note: I cannot test with 12x22 fonts in 2.4 because some/most drivers do
> not support it.
Which specific drivers are you talking about? All drivers for popular cards
support fontwidth 12 (Matrox, ATI, nVidia, 3Dfx, Permedia, VESA, ...).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-02-21 9:09 ` Geert Uytterhoeven
@ 2003-02-21 10:46 ` Antonino Daplas
2003-02-21 11:02 ` Geert Uytterhoeven
0 siblings, 1 reply; 37+ messages in thread
From: Antonino Daplas @ 2003-02-21 10:46 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: James Simmons, Petr Vandrovec, Dave Jones,
Linux Kernel Mailing List, Linux Fbdev development list
On Fri, 2003-02-21 at 17:09, Geert Uytterhoeven wrote:
> On 21 Feb 2003, Antonino Daplas wrote:
> > Note: I cannot test with 12x22 fonts in 2.4 because some/most drivers do
> > not support it.
>
> Which specific drivers are you talking about? All drivers for popular cards
> support fontwidth 12 (Matrox, ATI, nVidia, 3Dfx, Permedia, VESA, ...).
>
>
You're absolutely correct, I'm wondering why I thought that :-) Here's
a benchmark for 12x22, and it's 2x slower than 8x16, 2.4.x or 2.5.x.
Still, the 2.5.x version is slower than 2.4.x.
Tony
no accel
scrollmode: yredraw
font: 12x22
visual: packed pixels
time cat /usr/src/linux/MAINTAINERS
linux 2.4.20
bpp8
----
real 0m4.984s
user 0m0.000s
sys 0m4.940s
bpp16
-----
real 0m9.188s
user 0m0.000s
sys 0m9.090s
bpp24
-----
real 0m14.574s
user 0m0.000s
sys 0m14.380s
bpp32
-----
real 0m18.578s
user 0m0.000s
sys 0m18.390s
linux-2.5.62
bpp8
----
real 0m5.247s
user 0m0.001s
sys 0m5.245s
bpp16
-----
real 0m9.640s
user 0m0.001s
sys 0m9.591s
bpp24
-----
real 0m15.943s
user 0m0.001s
sys 0m15.944s
bpp32
-----
real 0m19.653s
user 0m0.002s
sys 0m19.651s
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-02-21 10:46 ` Antonino Daplas
@ 2003-02-21 11:02 ` Geert Uytterhoeven
0 siblings, 0 replies; 37+ messages in thread
From: Geert Uytterhoeven @ 2003-02-21 11:02 UTC (permalink / raw)
To: Antonino Daplas
Cc: James Simmons, Petr Vandrovec, Dave Jones,
Linux Kernel Mailing List, Linux Fbdev development list
On 21 Feb 2003, Antonino Daplas wrote:
> On Fri, 2003-02-21 at 17:09, Geert Uytterhoeven wrote:
> > On 21 Feb 2003, Antonino Daplas wrote:
> > > Note: I cannot test with 12x22 fonts in 2.4 because some/most drivers do
> > > not support it.
> >
> > Which specific drivers are you talking about? All drivers for popular cards
> > support fontwidth 12 (Matrox, ATI, nVidia, 3Dfx, Permedia, VESA, ...).
> >
> You're absolutely correct, I'm wondering why I thought that :-) Here's
> a benchmark for 12x22, and it's 2x slower than 8x16, 2.4.x or 2.5.x.
> Still, the 2.5.x version is slower than 2.4.x.
Because accel_putcs() falls back to individual character drawing if the
fontwidth is not a multiple of 8. Using one fb_imageblit() for other fontwidths
too would speed this up a lot (but needs some additional coding first).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: FBdev updates.
2003-02-20 19:58 ` James Simmons
2003-02-20 22:00 ` [Linux-fbdev-devel] " Antonino Daplas
@ 2003-02-21 1:45 ` David S. Miller
2003-02-21 9:04 ` [Linux-fbdev-devel] " Geert Uytterhoeven
1 sibling, 1 reply; 37+ messages in thread
From: David S. Miller @ 2003-02-21 1:45 UTC (permalink / raw)
To: James Simmons
Cc: Petr Vandrovec, Dave Jones, Linux Kernel Mailing List,
Linux Fbdev development list
On Thu, 2003-02-20 at 11:58, James Simmons wrote:
> > (3) persuade me that I want to write matroxcon and forget about fbcon at all, or
>
> This is the best solution.
And then we will have sbuscon as well, thus two places where
putcs() is necessary.
I don't understand, but I do hope that at some point it will be
realized that maybe allowing fbcon to generically handle putcs()
hardware is beneficial.
I can dream. :-)
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-02-21 1:45 ` David S. Miller
@ 2003-02-21 9:04 ` Geert Uytterhoeven
0 siblings, 0 replies; 37+ messages in thread
From: Geert Uytterhoeven @ 2003-02-21 9:04 UTC (permalink / raw)
To: David S. Miller
Cc: James Simmons, Petr Vandrovec, Dave Jones,
Linux Kernel Mailing List, Linux Fbdev development list
On 20 Feb 2003, David S. Miller wrote:
> On Thu, 2003-02-20 at 11:58, James Simmons wrote:
> > > (3) persuade me that I want to write matroxcon and forget about fbcon at all, or
> >
> > This is the best solution.
Huh?
> And then we will have sbuscon as well, thus two places where
> putcs() is necessary.
>
> I don't understand, but I do hope that at some point it will be
> realized that maybe allowing fbcon to generically handle putcs()
> hardware is beneficial.
>
> I can dream. :-)
Don't worry, tile blitting will be there (eventually)...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-02-20 18:29 ` Petr Vandrovec
2003-02-20 19:03 ` Jurriaan
2003-02-20 19:58 ` James Simmons
@ 2003-02-21 0:24 ` Antonino Daplas
2003-03-03 20:35 ` Petr Vandrovec
2 siblings, 1 reply; 37+ messages in thread
From: Antonino Daplas @ 2003-02-21 0:24 UTC (permalink / raw)
To: Petr Vandrovec
Cc: Dave Jones, James Simmons, Linux Kernel Mailing List,
Linux Fbdev development list
On Fri, 2003-02-21 at 02:29, Petr Vandrovec wrote:
>
> I was for five weeks in U.S., so I did not do anything with
> matroxfb during that time. I plan to use fillrect and copyrect
> from generic code (although it means unnecessary multiply on
> generic side, and division in matroxfb, but well, if we gave
> up on reasonable speed for fbdev long ago...). But I simply
> want loadfont and putcs hooks for character painting. And if
> fbdev maintainer does not want to give me them, well, then
> matroxfb and fbdev are not compatible.
Petr,
I submitted the Tile Blitting patch to James some time ago, it has
tilefill, tilecopy and tileblit hooks. These hooks should eliminate the
"multiply in fbcon, divide in driver" bottleneck.
It should result in the same behavior as you would expect in the the 2.4
API, so you can use text mode with your matroxfb driver. These same
hooks will also help optimize drawing if we need to use fonts like
12x22.
Tony
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-02-21 0:24 ` Antonino Daplas
@ 2003-03-03 20:35 ` Petr Vandrovec
2003-03-03 21:25 ` Geert Uytterhoeven
` (4 more replies)
0 siblings, 5 replies; 37+ messages in thread
From: Petr Vandrovec @ 2003-03-03 20:35 UTC (permalink / raw)
To: Antonino Daplas
Cc: James Simmons, Linux Kernel Mailing List, Linux Fbdev development list
On Fri, Feb 21, 2003 at 08:24:17AM +0800, Antonino Daplas wrote:
> On Fri, 2003-02-21 at 02:29, Petr Vandrovec wrote:
> >
> > I was for five weeks in U.S., so I did not do anything with
> > matroxfb during that time. I plan to use fillrect and copyrect
> > from generic code (although it means unnecessary multiply on
> > generic side, and division in matroxfb, but well, if we gave
> > up on reasonable speed for fbdev long ago...). But I simply
> > want loadfont and putcs hooks for character painting. And if
> > fbdev maintainer does not want to give me them, well, then
> > matroxfb and fbdev are not compatible.
>
> Petr,
>
> I submitted the Tile Blitting patch to James some time ago, it has
> tilefill, tilecopy and tileblit hooks. These hooks should eliminate the
> "multiply in fbcon, divide in driver" bottleneck.
>
> It should result in the same behavior as you would expect in the the 2.4
> API, so you can use text mode with your matroxfb driver. These same
> hooks will also help optimize drawing if we need to use fonts like
> 12x22.
Hi,
while waiting on these updates I updated matroxfb a bit
(ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.5.63.gz),
so that it now uses fb_* for cfb modes, and putcs/... hooks for
text mode. I have still dozen of changes in fbcon.c which I have
to eliminate (mainly logo painting and cursor handling - for now
I still use revc method, mainly because of I did not make into it yet).
But main thing is that I'd like to apologize to James - character
painting is much faster for 8x16 fonts under 2.5.x than it was under 2.4.x,
8bpp unaccelerated 8x16 under 2.5.x is even faster than accelerated
under 2.4.x.
Algorithm for obtaining times was same as described in
Documentation/fb/matroxfb.txt, with two differences: (1) hardware is
G550 in P4/1.6GHz, and (2) there was 30MBps video stream feed to
secondary G550 head of G550 during 2.4.19-pre6 tests, so I made 2.5.x
tests twice, once with fbtv running and once without.
My main concern now is 12x22 font... Accelerator setup
is so costly for each separate painted character that for 8bpp
accelerated version is even slower than unaccelerated one :-(
(and almost twice as slow when compared with 2.4.x).
And one (or two...) generic questions: why is not pseudo_palette
u32* pseudo_palette, or even directly u32 pseudo_palette[17] ?
And why we do not fill this pseudo_palette with
i * 0x01010101U for 8bpp pseudocolor and i * 0x11111111U for 4bpp
pseudocolor? This allowed me to remove couple of switches and tests
from acceleration fastpaths (and from cfb_imageblit and cfb_fillrect,
but I did not changed these two in my benchmarks below).
Best regards,
Petr Vandrovec
vandrove@vc.cvut.cz
NOACCEL, 8x16
2.4.19+fbtv 2.5.63+fbtv 2.5.63
8bpp 10.02 6.96 5.62
16bpp 20.05 13.25 10.62
24bpp 30.03 19.05 15.13
32bpp 45.00 25.74 20.54
ACCEL, 8x16
2.4.19+fbtv 2.5.63+fbtv 2.5.63
8bpp 7.48 3.38 3.00
16bpp 7.50 3.38 3.01
24bpp 7.53 3.56 3.53
32bpp 8.95 4.37 4.33
NOACCEL, 12x22
2.4.19+fbtv 2.5.63+fbtv 2.5.63
8bpp 11.54 13.35 10.93
16bpp 20.00 22.02 18.03
24bpp 30.03 35.83 29.53
32bpp 40.12 44.48 36.75
ACCEL, 12x22
2.4.19+fbtv 2.5.63+fbtv 2.5.63
8bpp 8.57 14.87 12.90
16bpp 8.57 14.93 12.92
24bpp 8.56 15.13 13.10
32bpp 8.56 15.52 13.76
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-03 20:35 ` Petr Vandrovec
@ 2003-03-03 21:25 ` Geert Uytterhoeven
2003-03-03 21:32 ` Antonino Daplas
` (3 subsequent siblings)
4 siblings, 0 replies; 37+ messages in thread
From: Geert Uytterhoeven @ 2003-03-03 21:25 UTC (permalink / raw)
To: Petr Vandrovec
Cc: Antonino Daplas, James Simmons, Linux Kernel Mailing List,
Linux Fbdev development list
On Mon, 3 Mar 2003, Petr Vandrovec wrote:
> My main concern now is 12x22 font... Accelerator setup
> is so costly for each separate painted character that for 8bpp
> accelerated version is even slower than unaccelerated one :-(
> (and almost twice as slow when compared with 2.4.x).
Have you already tried Antonino's patches to use one imageblit for multiple
characters with (fontwidth % 8) != 0? It should help.
BTW, I still have to try it with amifb.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-03 20:35 ` Petr Vandrovec
2003-03-03 21:25 ` Geert Uytterhoeven
@ 2003-03-03 21:32 ` Antonino Daplas
2003-03-05 20:23 ` James Simmons
2003-03-04 21:29 ` Jurriaan
` (2 subsequent siblings)
4 siblings, 1 reply; 37+ messages in thread
From: Antonino Daplas @ 2003-03-03 21:32 UTC (permalink / raw)
To: Petr Vandrovec
Cc: James Simmons, Linux Kernel Mailing List, Linux Fbdev development list
On Tue, 2003-03-04 at 04:35, Petr Vandrovec wrote:
> My main concern now is 12x22 font... Accelerator setup
> is so costly for each separate painted character that for 8bpp
> accelerated version is even slower than unaccelerated one :-(
> (and almost twice as slow when compared with 2.4.x).
I submitted a patch to James, which he already applied to his tree, that
addresses this problem. It conglomerates the series of bitmaps into 1,
so only one fb_imageblit is necessary. It should give faster painting
than the original 2.5.x code, hopefully faster than 2.4.x code, but
slower than 8x16 painting because of the additional packing.
>
> And one (or two...) generic questions: why is not pseudo_palette
> u32* pseudo_palette, or even directly u32 pseudo_palette[17] ?
Yes, all drivers should treat the pseudo_palette as u32* anyway, so why
not change pseudo-palette from void* to u32*?
> And why we do not fill this pseudo_palette with
> i * 0x01010101U for 8bpp pseudocolor and i * 0x11111111U for 4bpp
> pseudocolor? This allowed me to remove couple of switches and tests
> from acceleration fastpaths (and from cfb_imageblit and cfb_fillrect,
> but I did not changed these two in my benchmarks below).
I also agree for a different reason. Cards with unconventional formats
(such as monochrome at 8 bpp - 0 for black , 0xff for white) will not
work with the current code.
Tony
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-03 21:32 ` Antonino Daplas
@ 2003-03-05 20:23 ` James Simmons
2003-03-06 1:18 ` Antonino Daplas
0 siblings, 1 reply; 37+ messages in thread
From: James Simmons @ 2003-03-05 20:23 UTC (permalink / raw)
To: Antonino Daplas
Cc: Petr Vandrovec, Linux Kernel Mailing List, Linux Fbdev development list
> > And one (or two...) generic questions: why is not pseudo_palette
> > u32* pseudo_palette, or even directly u32 pseudo_palette[17] ?
>
> Yes, all drivers should treat the pseudo_palette as u32* anyway, so why
> not change pseudo-palette from void* to u32*?
See other email.
> > And why we do not fill this pseudo_palette with
> > i * 0x01010101U for 8bpp pseudocolor and i * 0x11111111U for 4bpp
> > pseudocolor? This allowed me to remove couple of switches and tests
> > from acceleration fastpaths (and from cfb_imageblit and cfb_fillrect,
> > but I did not changed these two in my benchmarks below).
>
> I also agree for a different reason. Cards with unconventional formats
> (such as monochrome at 8 bpp - 0 for black , 0xff for white) will not
> work with the current code.
Isn't that the job of setcolreg?
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-05 20:23 ` James Simmons
@ 2003-03-06 1:18 ` Antonino Daplas
0 siblings, 0 replies; 37+ messages in thread
From: Antonino Daplas @ 2003-03-06 1:18 UTC (permalink / raw)
To: James Simmons
Cc: Petr Vandrovec, Linux Kernel Mailing List, Linux Fbdev development list
On Thu, 2003-03-06 at 04:23, James Simmons wrote:
>
> > > And one (or two...) generic questions: why is not pseudo_palette
> > > u32* pseudo_palette, or even directly u32 pseudo_palette[17] ?
> >
> > Yes, all drivers should treat the pseudo_palette as u32* anyway, so why
> > not change pseudo-palette from void* to u32*?
>
> See other email.
>
> > > And why we do not fill this pseudo_palette with
> > > i * 0x01010101U for 8bpp pseudocolor and i * 0x11111111U for 4bpp
> > > pseudocolor? This allowed me to remove couple of switches and tests
> > > from acceleration fastpaths (and from cfb_imageblit and cfb_fillrect,
> > > but I did not changed these two in my benchmarks below).
> >
> > I also agree for a different reason. Cards with unconventional formats
> > (such as monochrome at 8 bpp - 0 for black , 0xff for white) will not
> > work with the current code.
>
> Isn't that the job of setcolreg?
>
setcolreg does that for directcolor and truecolor modes, because they're
the only ones that uses the pseudo_palette. See all driver codes, the
pseudo_palette is never initialized if in pseudo_color.
The purpose of the pseudo_palette is to enable to write pixels to the
framebuffer without knowing the color format at all. So, if you have
monochrome, then black is 0 and white is 1. But for monochrome 8bpp,
black is 0 and white is 0xff.
fbcon will send 0's and 1's, thus 0 and 1 will be written to the
framebuffer. If the drawing functions referred to the pseudo_palette,
whatever the visual format, then 0 and 0xff will be written, as it
should be.
Tony
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger
> for complex code. Debugging C/C++ programs can leave you feeling lost and
> disoriented. TotalView can help you find your way. Available on major UNIX
> and Linux platforms. Try it free. www.etnus.com
> _______________________________________________
> Linux-fbdev-devel mailing list
> Linux-fbdev-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-03 20:35 ` Petr Vandrovec
2003-03-03 21:25 ` Geert Uytterhoeven
2003-03-03 21:32 ` Antonino Daplas
@ 2003-03-04 21:29 ` Jurriaan
2003-03-04 21:46 ` Petr Vandrovec
2003-03-09 21:29 ` Petr Vandrovec
2003-03-05 20:22 ` James Simmons
2003-03-28 14:19 ` 2.5.66 fbdev performance (was Re: Re: FBdev updates) Petr Vandrovec
4 siblings, 2 replies; 37+ messages in thread
From: Jurriaan @ 2003-03-04 21:29 UTC (permalink / raw)
To: Petr Vandrovec
Cc: Antonino Daplas, James Simmons, Linux Kernel Mailing List,
Linux Fbdev development list
From: Petr Vandrovec <vandrove@vc.cvut.cz>
Date: Mon, Mar 03, 2003 at 09:35:00PM +0100
> On Fri, Feb 21, 2003 at 08:24:17AM +0800, Antonino Daplas wrote:
> > On Fri, 2003-02-21 at 02:29, Petr Vandrovec wrote:
> > >
> > > I was for five weeks in U.S., so I did not do anything with
> > > matroxfb during that time. I plan to use fillrect and copyrect
> > > from generic code (although it means unnecessary multiply on
> > > generic side, and division in matroxfb, but well, if we gave
> > > up on reasonable speed for fbdev long ago...). But I simply
> > > want loadfont and putcs hooks for character painting. And if
> > > fbdev maintainer does not want to give me them, well, then
> > > matroxfb and fbdev are not compatible.
> >
> > Petr,
> >
> > I submitted the Tile Blitting patch to James some time ago, it has
> > tilefill, tilecopy and tileblit hooks. These hooks should eliminate the
> > "multiply in fbcon, divide in driver" bottleneck.
> >
> > It should result in the same behavior as you would expect in the the 2.4
> > API, so you can use text mode with your matroxfb driver. These same
> > hooks will also help optimize drawing if we need to use fonts like
> > 12x22.
>
> Hi,
> while waiting on these updates I updated matroxfb a bit
> (ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.5.63.gz),
> so that it now uses fb_* for cfb modes, and putcs/... hooks for
> text mode.
There is a regression here: I boot my kernel like this:
kernel /boot/vmlinuz-2563matrox root=/dev/hda7 video=matrox:vesa:0x11E,fv:80,sgram hdc=scsi apm=smp apm=power-off nosmp=1
and have the following .config:
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_AGP=y
CONFIG_AGP_VIA=y
CONFIG_DRM=y
CONFIG_DRM_MGA=y
CONFIG_RAW_DRIVER=y
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FBCON_ADVANCED=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONTS=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_G450=y
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
CONFIG_FBCON_ACCEL=y
matroxfb: Matrox G400 (AGP) detected
matroxfb: MTRR's turned on
matroxfb: 1600x1200x16bpp (virtual: 1600x5241)
matroxfb: framebuffer at 0xD4000000, mapped to 0xe0805000, size 33554432
Console: switching to colour frame buffer device 133x54
fb0: MATROX VGA frame buffer device
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 266T chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] Initialized mga 3.1.0 20021029 on minor 0
I see a continuous strip of alternating blocks, of sub-character size,
at the extreme right end of my screen. The colors seem linked to the
color of the line with the cursor in some way.
After leaving XFRee, a piece of chbg's background picture is shown for a
short while, then the blocks return.
Kind regards,
Jurriaan
--
But the threat of disapproval had terrified me
No more my soul will I reveal
Wargasm - Chameleon
GNU/Linux 2.5.63 SMP/ReiserFS 1x2793 bogomips load av: 1.18 0.46 0.17
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-04 21:29 ` Jurriaan
@ 2003-03-04 21:46 ` Petr Vandrovec
2003-03-09 21:29 ` Petr Vandrovec
1 sibling, 0 replies; 37+ messages in thread
From: Petr Vandrovec @ 2003-03-04 21:46 UTC (permalink / raw)
To: Jurriaan
Cc: Antonino Daplas, James Simmons, Linux Kernel Mailing List,
Linux Fbdev development list
On Tue, Mar 04, 2003 at 10:29:06PM +0100, Jurriaan wrote:
> > text mode.
>
> There is a regression here: I boot my kernel like this:
>
> kernel /boot/vmlinuz-2563matrox root=/dev/hda7 video=matrox:vesa:0x11E,fv:80,sgram hdc=scsi apm=smp apm=power-off nosmp=1
>
> I see a continuous strip of alternating blocks, of sub-character size,
> at the extreme right end of my screen. The colors seem linked to the
> color of the line with the cursor in some way.
>
> After leaving XFRee, a piece of chbg's background picture is shown for a
> short while, then the blocks return.
Reproduced. Try this (untested) (it is against clean tree, so you'll
get some line offsets if you had applied my matroxfb patch). Or set
xres to odd value, even values do not work...
Petr Vandrovec
--- linux/drivers/video/console/fbcon.c 2003-03-03 18:42:37.000000000 +0100
+++ linux/drivers/video/console/fbcon.c 2003-03-04 22:44:05.000000000 +0100
@@ -456,7 +456,7 @@
region.color = attr_bgcol_ec(p, vc);
region.rop = ROP_COPY;
- if (rw & !bottom_only) {
+ if (rw && !bottom_only) {
region.dx = info->var.xoffset + rs;
region.dy = 0;
region.width = rw;
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-04 21:29 ` Jurriaan
2003-03-04 21:46 ` Petr Vandrovec
@ 2003-03-09 21:29 ` Petr Vandrovec
2003-03-09 22:27 ` Antonino Daplas
2003-03-11 15:31 ` James Simmons
1 sibling, 2 replies; 37+ messages in thread
From: Petr Vandrovec @ 2003-03-09 21:29 UTC (permalink / raw)
To: jsimmons
Cc: Antonino Daplas, Linux Kernel Mailing List, Linux Fbdev development list
Hi James,
I tried to use fb_cursor and I have quite a lot problems with
it:
(1) it uses global variables for storing last cursor value -
- but there is no global hardware, so after switching from
one fbdev to another you can have cursor with wrong shape,
wrong color and so on...
(2) callback from timer for cursor blinking may set almost any
FB_CUR_* bits. But in this case fb_cursor callback may be
called from interrupt context, while accelerator is busy
and so on... Did I miss some synchronization? Best for me
would be disabling blinking code in fbcon completely:
in VGA mode cursor blinks automatically, and in graphics mode
more lightweight only 'flash' callback is more appropriate
for me. But then there is problem with
(3) cursor_undrawn... I have no idea how is this supposed to work
if fbdev provides hardware cursor... And HZ/50 delay after
putcs makes orientation on screen very complicated, as there
is no cursor while new characters are appearing on screen.
Thanks,
Petr Vandrovec
vandrove@vc.cvut.cz
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-09 21:29 ` Petr Vandrovec
@ 2003-03-09 22:27 ` Antonino Daplas
2003-03-09 22:54 ` Petr Vandrovec
2003-03-11 15:31 ` James Simmons
1 sibling, 1 reply; 37+ messages in thread
From: Antonino Daplas @ 2003-03-09 22:27 UTC (permalink / raw)
To: Petr Vandrovec
Cc: James Simmons, Linux Kernel Mailing List, Linux Fbdev development list
On Mon, 2003-03-10 at 05:29, Petr Vandrovec wrote:
> Hi James,
> I tried to use fb_cursor and I have quite a lot problems with
> it:
> (1) it uses global variables for storing last cursor value -
> - but there is no global hardware, so after switching from
> one fbdev to another you can have cursor with wrong shape,
> wrong color and so on...
> (2) callback from timer for cursor blinking may set almost any
> FB_CUR_* bits. But in this case fb_cursor callback may be
> called from interrupt context, while accelerator is busy
> and so on... Did I miss some synchronization? Best for me
> would be disabling blinking code in fbcon completely:
> in VGA mode cursor blinks automatically, and in graphics mode
> more lightweight only 'flash' callback is more appropriate
> for me. But then there is problem with
I've also noticed problems with 1 and 2, and I submitted a patch to
James that allocates resources on a per device basis instead of being
global and statically allocated. This includes the cursor data
structures, cursor timer/vbl interrupt service, putcs buffer, and
optionally the softback buffer. The last is probably not very important
for the present setup but may become useful later on (ie, multiple
active consoles).
As for synchronization, I was meaning to ask some pointers on that. The
setup currently works like this:
(blink)
fbcon_cursor fbcon_vbl_handler (interrupt or timer)
| |
-----------------------
|
accel_cursor
|
-----------------------
| |
hardware soft_cursor accel_putcs accel_putc
| | |
-------------- -----------------
|
fb_get_buffer_offset
|
xxxfb_imageblit
|
-------------------
| |
hardware software
I was thinking of placing locks in accel_cursor and
fb_get_buffer_offset, but I'm not sure.
> (3) cursor_undrawn... I have no idea how is this supposed to work
In the present cursor api, the driver just needs to draw/undraw the
cursor whether by software or hardware. So the problem here is with
cursors that does it's own blinking, such as text modes.
> if fbdev provides hardware cursor... And HZ/50 delay after
> putcs makes orientation on screen very complicated, as there
> is no cursor while new characters are appearing on screen.
The delay is only for the blinking. After drawing a character/stream of
characters, an explicit "draw cursor" command immediately follows (I
think) via fbcon_cursor.
Tony
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-09 22:27 ` Antonino Daplas
@ 2003-03-09 22:54 ` Petr Vandrovec
2003-03-09 23:44 ` Antonino Daplas
0 siblings, 1 reply; 37+ messages in thread
From: Petr Vandrovec @ 2003-03-09 22:54 UTC (permalink / raw)
To: Antonino Daplas
Cc: James Simmons, Linux Kernel Mailing List, Linux Fbdev development list
On Mon, Mar 10, 2003 at 06:27:14AM +0800, Antonino Daplas wrote:
> On Mon, 2003-03-10 at 05:29, Petr Vandrovec wrote:
>
> As for synchronization, I was meaning to ask some pointers on that. The
> setup currently works like this:
>
> (blink)
> fbcon_cursor fbcon_vbl_handler (interrupt or timer)
> | |
> -----------------------
> |
> accel_cursor
> |
> -----------------------
> | |
> hardware soft_cursor accel_putcs accel_putc
> | | |
> -------------- -----------------
> |
> fb_get_buffer_offset
> |
> xxxfb_imageblit
> |
> -------------------
> | |
> hardware software
>
>
> I was thinking of placing locks in accel_cursor and
> fb_get_buffer_offset, but I'm not sure.
Maybe just auditing code is enough: cursor_on should be zero while
we are inside accel_putc/putcs (or inside any other fb function), and
if cursor_on is zero, fbcon_vbl_handler should do nothing. So just making
sure that fbcon_vbl_handler is not running on other CPU while we set
cursor_on = 0 should be enough.
> > if fbdev provides hardware cursor... And HZ/50 delay after
> > putcs makes orientation on screen very complicated, as there
> > is no cursor while new characters are appearing on screen.
>
> The delay is only for the blinking. After drawing a character/stream of
> characters, an explicit "draw cursor" command immediately follows (I
> think) via fbcon_cursor.
Why we schedule cursor painting at all then? While we are inside putcs,
we cannot paint cursor anyway (as we are busy with painting characters
at cursor position...) and fbcon_cursor(CM_DRAW) should restart timer interval
anyway (so you see cursor while you type characters, and not like Solaris
where cursor appears after you stop typing characters) (unfortunately when
I tried to verify how it behaves on secondary head of matrox (which does not
have hardware cursor), I made a typo and ...
Unable to handle kernel NULL pointer dereference at virtual address 00000196
printing eip:
c02f9258
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0060:[<c02f9258>] Tainted: PFS
EFLAGS: 00010202
EIP is at fb_open+0x28/0xf0
eax: c6ed2c30 ebx: 00000020 ecx: 00000001 edx: c04848e0
esi: 00000002 edi: 00000000 ebp: c6ed2c30 esp: c4bb3f18
ds: 007b es: 007b ss: 0068
Process con2fb (pid: 18180, threadinfo=c4bb2000 task=d874d940)
Stack: 00000006 c8a8aae4 c4bb2000 00000000 c8a8aae4 c01669ea c6ed2c30 c8a8aae4
dffe6830 c01435e3 c8a8aae4 c6ed2c30 dffe6830 00000000 c015af91 c6ed2c30
c8a8aae4 00000002 bffffe7a dcaa5000 c4bb2000 c015adb7 ca74978c dffe6830
Call Trace:
[<c01669ea>] chrdev_open+0xaa/0x110
[<c01435e3>] file_ra_state_init+0x23/0x40
[<c015af91>] dentry_open+0x1d1/0x1f0
[<c015adb7>] filp_open+0x67/0x70
[<c015b26b>] sys_open+0x5b/0x90
[<c0109983>] syscall_call+0x7/0xb
Code: 8b 86 94 01 00 00 b9 01 00 00 00 8b 10 85 d2 74 1c b8 00 e0
so I'll have to check it tomorrow on real dualhead system...)
Petr Vandrovec
vandrove@vc.cvut.cz
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-09 22:54 ` Petr Vandrovec
@ 2003-03-09 23:44 ` Antonino Daplas
0 siblings, 0 replies; 37+ messages in thread
From: Antonino Daplas @ 2003-03-09 23:44 UTC (permalink / raw)
To: Petr Vandrovec
Cc: James Simmons, Linux Kernel Mailing List, Linux Fbdev development list
On Mon, 2003-03-10 at 06:54, Petr Vandrovec wrote:
> On Mon, Mar 10, 2003 at 06:27:14AM +0800, Antonino Daplas wrote:
> > On Mon, 2003-03-10 at 05:29, Petr Vandrovec wrote:
> >
> > As for synchronization, I was meaning to ask some pointers on that. The
> > setup currently works like this:
> >
> > (blink)
> > fbcon_cursor fbcon_vbl_handler (interrupt or timer)
> > | |
> > -----------------------
> > |
> > accel_cursor
> > |
> > -----------------------
> > | |
> > hardware soft_cursor accel_putcs accel_putc
> > | | |
> > -------------- -----------------
> > |
> > fb_get_buffer_offset
> > |
> > xxxfb_imageblit
> > |
> > -------------------
> > | |
> > hardware software
> >
> >
> > I was thinking of placing locks in accel_cursor and
> > fb_get_buffer_offset, but I'm not sure.
>
> Maybe just auditing code is enough: cursor_on should be zero while
> we are inside accel_putc/putcs (or inside any other fb function), and
> if cursor_on is zero, fbcon_vbl_handler should do nothing. So just making
> sure that fbcon_vbl_handler is not running on other CPU while we set
> cursor_on = 0 should be enough.
I think that's what happens. cursor_on is set to 0 at the beginning of
fbcon_cursor(), and it remains 0 until the next fbcon_cursor() is
CM_DRAW or CM_MOVE. And while cursor_on is 0, fbcon_vbl_handler just
exits immediately. Yes, it's basically the code in 2.4, but instead of
using revc, it uses imageblit, and instead of allowing the drivers to do
the blinking, fbcon does it entirely, whether a hardware or software
cursor method is installed.
>
> > > if fbdev provides hardware cursor... And HZ/50 delay after
> > > putcs makes orientation on screen very complicated, as there
> > > is no cursor while new characters are appearing on screen.
> >
> > The delay is only for the blinking. After drawing a character/stream of
> > characters, an explicit "draw cursor" command immediately follows (I
> > think) via fbcon_cursor.
>
> Why we schedule cursor painting at all then? While we are inside putcs,
> we cannot paint cursor anyway (as we are busy with painting characters
I don't think any cursor painting is done while doing putcs, if the
CM_ERASE, putc/putcs, CM_DRAW/CM_MOVE sequence is followed. Note that I
haven't verified if that particular sequence is followed, I just assume
the console layer does.
Tony
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-09 21:29 ` Petr Vandrovec
2003-03-09 22:27 ` Antonino Daplas
@ 2003-03-11 15:31 ` James Simmons
1 sibling, 0 replies; 37+ messages in thread
From: James Simmons @ 2003-03-11 15:31 UTC (permalink / raw)
To: Petr Vandrovec
Cc: Antonino Daplas, Linux Kernel Mailing List, Linux Fbdev development list
> Hi James,
> I tried to use fb_cursor and I have quite a lot problems with
> it:
I'm working on the code today. I just finished the final touchs on the
pixmap buffer code. The next step is to make the pixmaps have flag for
static data versus dynamic data. You can then use fastfonst with static
buffer. This comes with the tile code. But first the cursor code today.
P.S
You can grab my latest work on the matroxfb driver at
http://phoenix.infradead.org/~jsimmons/matroxfb.diff.gz
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-03 20:35 ` Petr Vandrovec
` (2 preceding siblings ...)
2003-03-04 21:29 ` Jurriaan
@ 2003-03-05 20:22 ` James Simmons
2003-03-06 7:35 ` Sven Luther
2003-03-28 14:19 ` 2.5.66 fbdev performance (was Re: Re: FBdev updates) Petr Vandrovec
4 siblings, 1 reply; 37+ messages in thread
From: James Simmons @ 2003-03-05 20:22 UTC (permalink / raw)
To: Petr Vandrovec
Cc: Antonino Daplas, Linux Kernel Mailing List, Linux Fbdev development list
> Hi,
> while waiting on these updates I updated matroxfb a bit
> (ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.5.63.gz),
> so that it now uses fb_* for cfb modes, and putcs/... hooks for
> text mode. I have still dozen of changes in fbcon.c which I have
> to eliminate (mainly logo painting and cursor handling - for now
> I still use revc method, mainly because of I did not make into it yet).
I grabbed your latest patch and started to merge it with my latest work on
the matrox driver. As soon as I'm done merging my matrox changes I will
send you a patch right away.
> My main concern now is 12x22 font... Accelerator setup
> is so costly for each separate painted character that for 8bpp
> accelerated version is even slower than unaccelerated one :-(
> (and almost twice as slow when compared with 2.4.x).
Try the latest patch I released.
> And one (or two...) generic questions: why is not pseudo_palette
> u32* pseudo_palette, or even directly u32 pseudo_palette[17] ?
pseudo_palette was originally designed to be a pointer to some kind of
data for color register programming. For example many PPC graphics cards
have a color register region. Now you could have that point to
pseudo_palette. Note pseudo_palette is only visiable in fbmem.c for the
logo drawing code. Personally I liek to see that hidden.
> And why we do not fill this pseudo_palette with
> i * 0x01010101U for 8bpp pseudocolor and i * 0x11111111U for 4bpp
> pseudocolor? This allowed me to remove couple of switches and tests
> from acceleration fastpaths (and from cfb_imageblit and cfb_fillrect,
> but I did not changed these two in my benchmarks below).
??? Does your accel engine require these kinds of values?
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-05 20:22 ` James Simmons
@ 2003-03-06 7:35 ` Sven Luther
2003-03-06 8:05 ` Antonino Daplas
0 siblings, 1 reply; 37+ messages in thread
From: Sven Luther @ 2003-03-06 7:35 UTC (permalink / raw)
To: James Simmons
Cc: Petr Vandrovec, Antonino Daplas, Linux Kernel Mailing List,
Linux Fbdev development list
On Wed, Mar 05, 2003 at 08:22:26PM +0000, James Simmons wrote:
>
> > Hi,
> > while waiting on these updates I updated matroxfb a bit
> > (ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.5.63.gz),
> > so that it now uses fb_* for cfb modes, and putcs/... hooks for
> > text mode. I have still dozen of changes in fbcon.c which I have
> > to eliminate (mainly logo painting and cursor handling - for now
> > I still use revc method, mainly because of I did not make into it yet).
>
> I grabbed your latest patch and started to merge it with my latest work on
> the matrox driver. As soon as I'm done merging my matrox changes I will
> send you a patch right away.
>
> > My main concern now is 12x22 font... Accelerator setup
> > is so costly for each separate painted character that for 8bpp
> > accelerated version is even slower than unaccelerated one :-(
> > (and almost twice as slow when compared with 2.4.x).
>
> Try the latest patch I released.
>
> > And one (or two...) generic questions: why is not pseudo_palette
> > u32* pseudo_palette, or even directly u32 pseudo_palette[17] ?
>
> pseudo_palette was originally designed to be a pointer to some kind of
> data for color register programming. For example many PPC graphics cards
> have a color register region. Now you could have that point to
Does this correspond to the LUT i have in my boards ?
BTW, what is the point in having a pseudo_palette if you can store
the colors in the onchip LUT table.
Friendly,
Sven Luther
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-06 7:35 ` Sven Luther
@ 2003-03-06 8:05 ` Antonino Daplas
2003-03-06 8:25 ` Sven Luther
0 siblings, 1 reply; 37+ messages in thread
From: Antonino Daplas @ 2003-03-06 8:05 UTC (permalink / raw)
To: Sven Luther
Cc: James Simmons, Petr Vandrovec, Linux Kernel Mailing List,
Linux Fbdev development list
On Thu, 2003-03-06 at 15:35, Sven Luther wrote:
> >
> > > And one (or two...) generic questions: why is not pseudo_palette
> > > u32* pseudo_palette, or even directly u32 pseudo_palette[17] ?
> >
> > pseudo_palette was originally designed to be a pointer to some kind of
> > data for color register programming. For example many PPC graphics cards
> > have a color register region. Now you could have that point to
>
> Does this correspond to the LUT i have in my boards ?
>
> BTW, what is the point in having a pseudo_palette if you can store
> the colors in the onchip LUT table.
>
The hardware clut typically stores each color channel separately. In
software terms, this is akin to struct fb_cmap. The pseudo_palette, on
the other hand, is a pixel LUT, the contents of which can be directly
written to the framebuffer without it ever knowing the format at all, ie
it does not matter if it's RGB or YUV. This makes the upper layer
independent of the low-lever driver (at least in terms of colorspace
formats).
Tony
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
2003-03-06 8:05 ` Antonino Daplas
@ 2003-03-06 8:25 ` Sven Luther
0 siblings, 0 replies; 37+ messages in thread
From: Sven Luther @ 2003-03-06 8:25 UTC (permalink / raw)
To: Antonino Daplas
Cc: Sven Luther, James Simmons, Petr Vandrovec,
Linux Kernel Mailing List, Linux Fbdev development list
On Thu, Mar 06, 2003 at 04:05:32PM +0800, Antonino Daplas wrote:
> On Thu, 2003-03-06 at 15:35, Sven Luther wrote:
> > >
> > > > And one (or two...) generic questions: why is not pseudo_palette
> > > > u32* pseudo_palette, or even directly u32 pseudo_palette[17] ?
> > >
> > > pseudo_palette was originally designed to be a pointer to some kind of
> > > data for color register programming. For example many PPC graphics cards
> > > have a color register region. Now you could have that point to
> >
> > Does this correspond to the LUT i have in my boards ?
> >
> > BTW, what is the point in having a pseudo_palette if you can store
> > the colors in the onchip LUT table.
> >
>
> The hardware clut typically stores each color channel separately. In
> software terms, this is akin to struct fb_cmap. The pseudo_palette, on
> the other hand, is a pixel LUT, the contents of which can be directly
> written to the framebuffer without it ever knowing the format at all, ie
> it does not matter if it's RGB or YUV. This makes the upper layer
> independent of the low-lever driver (at least in terms of colorspace
> formats).
Ok, thanks, ...
Friendly,
Sven Luther
^ permalink raw reply [flat|nested] 37+ messages in thread
* 2.5.66 fbdev performance (was Re: Re: FBdev updates)
2003-03-03 20:35 ` Petr Vandrovec
` (3 preceding siblings ...)
2003-03-05 20:22 ` James Simmons
@ 2003-03-28 14:19 ` Petr Vandrovec
2003-03-28 18:50 ` [Linux-fbdev-devel] " Antonino Daplas
4 siblings, 1 reply; 37+ messages in thread
From: Petr Vandrovec @ 2003-03-28 14:19 UTC (permalink / raw)
To: Antonino Daplas
Cc: James Simmons, Linux Kernel Mailing List, Linux Fbdev development list
Hello,
I see a problem with new pixmap based code...
There is 25% slowdown for 8x16 8bpp videomode
after upgrading from 2.5.63 to 2.5.66 :-(
Setup as usual, 1024x768, 100Hz, secondary
head doing nothing (i.e. no fbtv...), CPU
doing nothing except running this test.
P4 1.6GHz, MGA G550. Shown value is system
time in seconds needed to repaint screen 1000
times (avg. from 3 tests) (you can treat it
as time in milliseconds needed to repaint
screen once).
Although speedup for 12x22 font is very nice,
it looks to me that we paid too much for it.
Problem is in the new pixmap handling, especially
pixbuf.output - so now instead of memcpy we
call some function for copying each byte from
font to temporary buffer. As you can see,
"constant" portion of time, independent of
color depth, increased by 1sec for unaccelerated
and by 0.75sec for accelerated putcs.
It is 5% to 25% slowdown (5% for 32bpp unaccelerated,
25% for 8bpp accelerated).
And while we are still faster than 2.4.x, we were
even better...
Petr
NOACCEL, 8x16
2.4.19+fbtv 2.5.63+fbtv 2.5.63 2.5.66
8bpp 10.02 6.96 5.62 6.62
16bpp 20.05 13.25 10.62 11.63
24bpp 30.03 19.05 15.13 16.07
32bpp 45.00 25.74 20.54 21.62
ACCEL, 8x16
2.4.19+fbtv 2.5.63+fbtv 2.5.63 2.5.66
8bpp 7.48 3.38 3.00 3.75
16bpp 7.50 3.38 3.01 3.76
24bpp 7.53 3.56 3.53 4.23
32bpp 8.95 4.37 4.33 5.05
NOACCEL, 12x22
2.4.19+fbtv 2.5.63+fbtv 2.5.63 2.5.66
8bpp 11.54 13.35 10.93 8.96
16bpp 20.00 22.02 18.03 13.61
24bpp 30.03 35.83 29.53 18.07
32bpp 40.12 44.48 36.75 23.22
ACCEL, 12x22
2.4.19+fbtv 2.5.63+fbtv 2.5.63 2.5.66
8bpp 8.57 14.87 12.90 5.72
16bpp 8.57 14.93 12.92 5.72
24bpp 8.56 15.13 13.10 6.20
32bpp 8.56 15.52 13.76 6.98
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] 2.5.66 fbdev performance (was Re: Re: FBdev updates)
2003-03-28 14:19 ` 2.5.66 fbdev performance (was Re: Re: FBdev updates) Petr Vandrovec
@ 2003-03-28 18:50 ` Antonino Daplas
0 siblings, 0 replies; 37+ messages in thread
From: Antonino Daplas @ 2003-03-28 18:50 UTC (permalink / raw)
To: Petr Vandrovec
Cc: James Simmons, Linux Kernel Mailing List, Linux Fbdev development list
On Fri, 2003-03-28 at 22:19, Petr Vandrovec wrote:
>
> Problem is in the new pixmap handling, especially
> pixbuf.output - so now instead of memcpy we
> call some function for copying each byte from
> font to temporary buffer. As you can see,
> "constant" portion of time, independent of
> color depth, increased by 1sec for unaccelerated
> and by 0.75sec for accelerated putcs.
> It is 5% to 25% slowdown (5% for 32bpp unaccelerated,
> 25% for 8bpp accelerated).
>
Actually, the slowdown is caused not just by the overhead of the
read/write methods, but also due to the extra work padding and aligning
the bitmaps according to requirements of the hardware. This was because
James wanted support for buffers located not just in system memory but
also graphics/dma memory.
The result is that unaccelerated imageblit will slow down while properly
written accelerated imageblit will experience some speed up (not much,
probably around 5%).
We can:
1. partially reverse the code so it behaves similarly to 2.5.63.
Support for writing to graphics/dma memory will go away.
2. split the code path: one will go to the '2.5.63' path, the other
will go to the '2.5.66' path, depending on the setting of info->pixmap.
3. keep the code as is
Personally, I prefer #1, but it's up to James/Geert.
Tony
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: FBdev updates.
2003-02-20 1:09 FBdev updates James Simmons
2003-02-20 1:17 ` Jeff Garzik
2003-02-20 15:02 ` Dave Jones
@ 2003-02-20 15:10 ` Ivan Kokshaysky
2 siblings, 0 replies; 37+ messages in thread
From: Ivan Kokshaysky @ 2003-02-20 15:10 UTC (permalink / raw)
To: James Simmons; +Cc: Linux Kernel Mailing List, Linux Fbdev development list
On Thu, Feb 20, 2003 at 01:09:33AM +0000, James Simmons wrote:
> <jsimmons@maxwell.earthlink.net> (03/02/19 1.913.1.1)
...
> using standard macros for vgacon.c.
Unfortunately, this makes vgacon on non-legacy platforms where
the I/O port address doesn't fit in unsigned short almost
unfixable. :-(
Ivan.
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: [Linux-fbdev-devel] Re: FBdev updates.
@ 2003-03-05 20:31 Petr Vandrovec
0 siblings, 0 replies; 37+ messages in thread
From: Petr Vandrovec @ 2003-03-05 20:31 UTC (permalink / raw)
To: James Simmons; +Cc: Antonino Daplas, linux-kernel, Linux Fbdev development list
On 5 Mar 03 at 20:22, James Simmons wrote:
>
> > And one (or two...) generic questions: why is not pseudo_palette
> > u32* pseudo_palette, or even directly u32 pseudo_palette[17] ?
>
> pseudo_palette was originally designed to be a pointer to some kind of
> data for color register programming. For example many PPC graphics cards
> have a color register region. Now you could have that point to
> pseudo_palette. Note pseudo_palette is only visiable in fbmem.c for the
> logo drawing code. Personally I liek to see that hidden.
cfbfillrect? cfbimageblit? Both use pseudo_palette, and both convert
it to u32*.
> > And why we do not fill this pseudo_palette with
> > i * 0x01010101U for 8bpp pseudocolor and i * 0x11111111U for 4bpp
> > pseudocolor? This allowed me to remove couple of switches and tests
> > from acceleration fastpaths (and from cfb_imageblit and cfb_fillrect,
> > but I did not changed these two in my benchmarks below).
>
> ??? Does your accel engine require these kinds of values?
Yes. It is 32bit engine, and so it wants 32bit value. And even if
not, code doing
if (p->fix.visual == FB_VISUAL_TRUECOLOR ||
p->fix.visual == FB_VISUAL_DIRECTCOLOR)
fg = p->pseudo_palette[rect->color];
else
fg = rect->color;
is horrible. Two conditional jumps on each rectangle. If you'll do
always lookup through pseudo_palette, not only that you get rid of
these jumps, you can also remove calls to pixel_to_pat32 (and accompanying
tables & lookups), as you do this expansion at set_var time,
instead of at blit/clear time.
Best regards,
Petr Vandrovec
vandrove@vc.cvut.cz
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: FBdev updates.
@ 2003-03-04 21:53 Petr Vandrovec
0 siblings, 0 replies; 37+ messages in thread
From: Petr Vandrovec @ 2003-03-04 21:53 UTC (permalink / raw)
To: thunder7
Cc: Antonino Daplas, James Simmons, Linux Kernel Mailing List, Linux,
Fbdev, development, list <linux-fbdev-
On 4 Mar 03 at 22:46, Petr Vandrovec wrote:
> On Tue, Mar 04, 2003 at 10:29:06PM +0100, Jurriaan wrote:
> > > text mode.
> >
> > There is a regression here: I boot my kernel like this:
> >
> > kernel /boot/vmlinuz-2563matrox root=/dev/hda7 video=matrox:vesa:0x11E,fv:80,sgram hdc=scsi apm=smp apm=power-off nosmp=1
> >
> > I see a continuous strip of alternating blocks, of sub-character size,
> > at the extreme right end of my screen. The colors seem linked to the
> > color of the line with the cursor in some way.
> >
> > After leaving XFRee, a piece of chbg's background picture is shown for a
> > short while, then the blocks return.
>
> Reproduced. Try this (untested) (it is against clean tree, so you'll
> get some line offsets if you had applied my matroxfb patch). Or set
> xres to odd value, even values do not work...
> Petr Vandrovec
>
>
> --- linux/drivers/video/console/fbcon.c 2003-03-03 18:42:37.000000000 +0100
> +++ linux/drivers/video/console/fbcon.c 2003-03-04 22:44:05.000000000 +0100
> @@ -456,7 +456,7 @@
> region.color = attr_bgcol_ec(p, vc);
> region.rop = ROP_COPY;
>
> - if (rw & !bottom_only) {
> + if (rw && !bottom_only) {
> region.dx = info->var.xoffset + rs;
> region.dy = 0;
> region.width = rw;
> -
It will not solve problem that you'll get non-black edge if your
background color is not black... I'll try to invent some solution,
like ROP_ZERO...
Petr
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: fbdev updates.
@ 2002-06-05 16:50 Russell King
2002-06-05 17:21 ` [Linux-fbdev-devel] " James Simmons
0 siblings, 1 reply; 37+ messages in thread
From: Russell King @ 2002-06-05 16:50 UTC (permalink / raw)
To: James Simmons; +Cc: Linux Fbdev development list, Linux Kernel Mailing List
On Wed, Jun 05, 2002 at 09:39:48AM -0700, James Simmons wrote:
> Since no one has complianed for some time I like to push the next set of
> changes to Linus. Anyone with objections please give a yell.
A small suggestion - could you post diffstat -p1 output with your patch
announcements please?
--
Russell King (rmk@arm.linux.org.uk) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
^ permalink raw reply [flat|nested] 37+ messages in thread* Re: [Linux-fbdev-devel] Re: fbdev updates.
2002-06-05 16:50 fbdev updates Russell King
@ 2002-06-05 17:21 ` James Simmons
0 siblings, 0 replies; 37+ messages in thread
From: James Simmons @ 2002-06-05 17:21 UTC (permalink / raw)
To: Russell King; +Cc: Linux Fbdev development list, Linux Kernel Mailing List
> On Wed, Jun 05, 2002 at 09:39:48AM -0700, James Simmons wrote:
> > Since no one has complianed for some time I like to push the next set of
> > changes to Linus. Anyone with objections please give a yell.
>
> A small suggestion - could you post diffstat -p1 output with your patch
> announcements please?
Patch at http://www.transvirtual.com/~jsimmons/fbdev.diff.gz
diffstat results:
drivers/video/Config.in | 40
drivers/video/Makefile | 28
drivers/video/anakinfb.c | 4
drivers/video/aty128fb.c | 5
drivers/video/cfbcopyarea.c | 4
drivers/video/cfbimgblt.c | 10
drivers/video/clps711xfb.c | 3
drivers/video/cyber2000fb.c | 5
drivers/video/dn_accel.h | 9
drivers/video/dn_cfb4.c | 492 -----
drivers/video/dn_cfb8.c | 540 ------
drivers/video/dnfb.c | 535 +-----
drivers/video/fbcmap.c | 2
drivers/video/fbmem.c | 3
drivers/video/maxinefb.c | 290 ---
drivers/video/neofb.c | 3639 ++++++++++++++++++++------------------------
drivers/video/neofb.h | 291 ---
drivers/video/pm2fb.c | 745 ++++++---
drivers/video/pmag-ba-fb.c | 343 ----
drivers/video/pmagb-b-fb.c | 344 ----
drivers/video/skeletonfb.c | 2
drivers/video/tdfxfb.c | 2434 ++++++++---------------------
drivers/video/tx3912fb.c | 566 ++----
drivers/video/tx3912fb.h | 128 -
drivers/video/vfb.c | 4
include/video/neomagic.h | 264 +++
include/video/pm2fb.h | 222 ++
include/video/tx3912.h | 62
28 files changed, 4034 insertions(+), 6980 deletions(-)
^ permalink raw reply [flat|nested] 37+ messages in thread
end of thread, other threads:[~2003-03-28 18:58 UTC | newest]
Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-02-20 1:09 FBdev updates James Simmons
2003-02-20 1:17 ` Jeff Garzik
2003-02-20 1:22 ` James Simmons
2003-02-20 15:02 ` Dave Jones
2003-02-20 15:07 ` James Simmons
2003-02-20 18:29 ` Petr Vandrovec
2003-02-20 19:03 ` Jurriaan
2003-02-20 19:58 ` James Simmons
2003-02-20 22:00 ` [Linux-fbdev-devel] " Antonino Daplas
2003-02-21 9:09 ` Geert Uytterhoeven
2003-02-21 10:46 ` Antonino Daplas
2003-02-21 11:02 ` Geert Uytterhoeven
2003-02-21 1:45 ` David S. Miller
2003-02-21 9:04 ` [Linux-fbdev-devel] " Geert Uytterhoeven
2003-02-21 0:24 ` Antonino Daplas
2003-03-03 20:35 ` Petr Vandrovec
2003-03-03 21:25 ` Geert Uytterhoeven
2003-03-03 21:32 ` Antonino Daplas
2003-03-05 20:23 ` James Simmons
2003-03-06 1:18 ` Antonino Daplas
2003-03-04 21:29 ` Jurriaan
2003-03-04 21:46 ` Petr Vandrovec
2003-03-09 21:29 ` Petr Vandrovec
2003-03-09 22:27 ` Antonino Daplas
2003-03-09 22:54 ` Petr Vandrovec
2003-03-09 23:44 ` Antonino Daplas
2003-03-11 15:31 ` James Simmons
2003-03-05 20:22 ` James Simmons
2003-03-06 7:35 ` Sven Luther
2003-03-06 8:05 ` Antonino Daplas
2003-03-06 8:25 ` Sven Luther
2003-03-28 14:19 ` 2.5.66 fbdev performance (was Re: Re: FBdev updates) Petr Vandrovec
2003-03-28 18:50 ` [Linux-fbdev-devel] " Antonino Daplas
2003-02-20 15:10 ` FBdev updates Ivan Kokshaysky
-- strict thread matches above, loose matches on Subject: below --
2003-03-05 20:31 [Linux-fbdev-devel] " Petr Vandrovec
2003-03-04 21:53 Petr Vandrovec
2002-06-05 16:50 fbdev updates Russell King
2002-06-05 17:21 ` [Linux-fbdev-devel] " James Simmons
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).