* [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3
[not found] <20220720122711.6174-1-pngliu@hotmail.com>
@ 2022-07-20 12:27 ` pngliu
2022-08-04 8:50 ` Peng Liu
2022-08-31 15:01 ` Jan Kiszka
2022-07-20 12:27 ` [PATCH 3/3] scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing pngliu
1 sibling, 2 replies; 12+ messages in thread
From: pngliu @ 2022-07-20 12:27 UTC (permalink / raw)
To: jan.kiszka, kbingham; +Cc: linux-kernel, Peng Liu
From: Peng Liu <liupeng17@lenovo.com>
Below incompatibilities between Python2 and Python3 made lx-timerlist
fail to run under Python3.
o xrange() is replaced by range() in Python3
o bytes and str are different types in Python3
o the return value of Inferior.read_memory() is memoryview object in
Python3
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
---
scripts/gdb/linux/timerlist.py | 4 +++-
scripts/gdb/linux/utils.py | 5 ++++-
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/scripts/gdb/linux/timerlist.py b/scripts/gdb/linux/timerlist.py
index 44e39dc3eb64..8281da068c5b 100644
--- a/scripts/gdb/linux/timerlist.py
+++ b/scripts/gdb/linux/timerlist.py
@@ -72,7 +72,7 @@ def print_cpu(hrtimer_bases, cpu, max_clock_bases):
ts = cpus.per_cpu(tick_sched_ptr, cpu)
text = "cpu: {}\n".format(cpu)
- for i in xrange(max_clock_bases):
+ for i in range(max_clock_bases):
text += " clock {}:\n".format(i)
text += print_base(cpu_base['clock_base'][i])
@@ -157,6 +157,8 @@ def pr_cpumask(mask):
num_bytes = (nr_cpu_ids + 7) / 8
buf = utils.read_memoryview(inf, bits, num_bytes).tobytes()
buf = binascii.b2a_hex(buf)
+ if type(buf) is not str:
+ buf=buf.decode()
chunks = []
i = num_bytes
diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py
index ff7c1799d588..db59f986c7fd 100644
--- a/scripts/gdb/linux/utils.py
+++ b/scripts/gdb/linux/utils.py
@@ -89,7 +89,10 @@ def get_target_endianness():
def read_memoryview(inf, start, length):
- return memoryview(inf.read_memory(start, length))
+ m = inf.read_memory(start, length)
+ if type(m) is memoryview:
+ return m
+ return memoryview(m)
def read_u16(buffer, offset):
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3
2022-07-20 12:27 ` [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3 pngliu
@ 2022-08-04 8:50 ` Peng Liu
2022-08-22 9:30 ` Peng Liu
2022-08-31 15:01 ` Jan Kiszka
1 sibling, 1 reply; 12+ messages in thread
From: Peng Liu @ 2022-08-04 8:50 UTC (permalink / raw)
To: jan.kiszka, kbingham; +Cc: linux-kernel, Peng Liu
ping
On 2022/7/20 20:27, pngliu@hotmail.com wrote:
> From: Peng Liu <liupeng17@lenovo.com>
>
> Below incompatibilities between Python2 and Python3 made lx-timerlist
> fail to run under Python3.
>
> o xrange() is replaced by range() in Python3
> o bytes and str are different types in Python3
> o the return value of Inferior.read_memory() is memoryview object in
> Python3
>
> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
> ---
> scripts/gdb/linux/timerlist.py | 4 +++-
> scripts/gdb/linux/utils.py | 5 ++++-
> 2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/scripts/gdb/linux/timerlist.py b/scripts/gdb/linux/timerlist.py
> index 44e39dc3eb64..8281da068c5b 100644
> --- a/scripts/gdb/linux/timerlist.py
> +++ b/scripts/gdb/linux/timerlist.py
> @@ -72,7 +72,7 @@ def print_cpu(hrtimer_bases, cpu, max_clock_bases):
> ts = cpus.per_cpu(tick_sched_ptr, cpu)
>
> text = "cpu: {}\n".format(cpu)
> - for i in xrange(max_clock_bases):
> + for i in range(max_clock_bases):
> text += " clock {}:\n".format(i)
> text += print_base(cpu_base['clock_base'][i])
>
> @@ -157,6 +157,8 @@ def pr_cpumask(mask):
> num_bytes = (nr_cpu_ids + 7) / 8
> buf = utils.read_memoryview(inf, bits, num_bytes).tobytes()
> buf = binascii.b2a_hex(buf)
> + if type(buf) is not str:
> + buf=buf.decode()
>
> chunks = []
> i = num_bytes
> diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py
> index ff7c1799d588..db59f986c7fd 100644
> --- a/scripts/gdb/linux/utils.py
> +++ b/scripts/gdb/linux/utils.py
> @@ -89,7 +89,10 @@ def get_target_endianness():
>
>
> def read_memoryview(inf, start, length):
> - return memoryview(inf.read_memory(start, length))
> + m = inf.read_memory(start, length)
> + if type(m) is memoryview:
> + return m
> + return memoryview(m)
>
>
> def read_u16(buffer, offset):
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3
2022-08-04 8:50 ` Peng Liu
@ 2022-08-22 9:30 ` Peng Liu
2022-08-31 2:02 ` Peng Liu
0 siblings, 1 reply; 12+ messages in thread
From: Peng Liu @ 2022-08-22 9:30 UTC (permalink / raw)
To: jan.kiszka; +Cc: kbingham, linux-kernel, Peng Liu
ping
On 2022/8/4 16:50, Peng Liu wrote:
> ping
>
> On 2022/7/20 20:27, pngliu@hotmail.com wrote:
>> From: Peng Liu <liupeng17@lenovo.com>
>>
>> Below incompatibilities between Python2 and Python3 made lx-timerlist
>> fail to run under Python3.
>>
>> o xrange() is replaced by range() in Python3
>> o bytes and str are different types in Python3
>> o the return value of Inferior.read_memory() is memoryview object in
>> Python3
>>
>> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
>> ---
>> scripts/gdb/linux/timerlist.py | 4 +++-
>> scripts/gdb/linux/utils.py | 5 ++++-
>> 2 files changed, 7 insertions(+), 2 deletions(-)
>>
>> diff --git a/scripts/gdb/linux/timerlist.py
>> b/scripts/gdb/linux/timerlist.py
>> index 44e39dc3eb64..8281da068c5b 100644
>> --- a/scripts/gdb/linux/timerlist.py
>> +++ b/scripts/gdb/linux/timerlist.py
>> @@ -72,7 +72,7 @@ def print_cpu(hrtimer_bases, cpu, max_clock_bases):
>> ts = cpus.per_cpu(tick_sched_ptr, cpu)
>> text = "cpu: {}\n".format(cpu)
>> - for i in xrange(max_clock_bases):
>> + for i in range(max_clock_bases):
>> text += " clock {}:\n".format(i)
>> text += print_base(cpu_base['clock_base'][i])
>> @@ -157,6 +157,8 @@ def pr_cpumask(mask):
>> num_bytes = (nr_cpu_ids + 7) / 8
>> buf = utils.read_memoryview(inf, bits, num_bytes).tobytes()
>> buf = binascii.b2a_hex(buf)
>> + if type(buf) is not str:
>> + buf=buf.decode()
>> chunks = []
>> i = num_bytes
>> diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py
>> index ff7c1799d588..db59f986c7fd 100644
>> --- a/scripts/gdb/linux/utils.py
>> +++ b/scripts/gdb/linux/utils.py
>> @@ -89,7 +89,10 @@ def get_target_endianness():
>> def read_memoryview(inf, start, length):
>> - return memoryview(inf.read_memory(start, length))
>> + m = inf.read_memory(start, length)
>> + if type(m) is memoryview:
>> + return m
>> + return memoryview(m)
>> def read_u16(buffer, offset):
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3
2022-08-22 9:30 ` Peng Liu
@ 2022-08-31 2:02 ` Peng Liu
0 siblings, 0 replies; 12+ messages in thread
From: Peng Liu @ 2022-08-31 2:02 UTC (permalink / raw)
To: kbingham; +Cc: jan.kiszka, linux-kernel, Peng Liu
ping
On 2022/8/22 17:30, Peng Liu wrote:
> ping
>
> On 2022/8/4 16:50, Peng Liu wrote:
>> ping
>>
>> On 2022/7/20 20:27, pngliu@hotmail.com wrote:
>>> From: Peng Liu <liupeng17@lenovo.com>
>>>
>>> Below incompatibilities between Python2 and Python3 made lx-timerlist
>>> fail to run under Python3.
>>>
>>> o xrange() is replaced by range() in Python3
>>> o bytes and str are different types in Python3
>>> o the return value of Inferior.read_memory() is memoryview object in
>>> Python3
>>>
>>> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
>>> ---
>>> scripts/gdb/linux/timerlist.py | 4 +++-
>>> scripts/gdb/linux/utils.py | 5 ++++-
>>> 2 files changed, 7 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/scripts/gdb/linux/timerlist.py
>>> b/scripts/gdb/linux/timerlist.py
>>> index 44e39dc3eb64..8281da068c5b 100644
>>> --- a/scripts/gdb/linux/timerlist.py
>>> +++ b/scripts/gdb/linux/timerlist.py
>>> @@ -72,7 +72,7 @@ def print_cpu(hrtimer_bases, cpu, max_clock_bases):
>>> ts = cpus.per_cpu(tick_sched_ptr, cpu)
>>> text = "cpu: {}\n".format(cpu)
>>> - for i in xrange(max_clock_bases):
>>> + for i in range(max_clock_bases):
>>> text += " clock {}:\n".format(i)
>>> text += print_base(cpu_base['clock_base'][i])
>>> @@ -157,6 +157,8 @@ def pr_cpumask(mask):
>>> num_bytes = (nr_cpu_ids + 7) / 8
>>> buf = utils.read_memoryview(inf, bits, num_bytes).tobytes()
>>> buf = binascii.b2a_hex(buf)
>>> + if type(buf) is not str:
>>> + buf=buf.decode()
>>> chunks = []
>>> i = num_bytes
>>> diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py
>>> index ff7c1799d588..db59f986c7fd 100644
>>> --- a/scripts/gdb/linux/utils.py
>>> +++ b/scripts/gdb/linux/utils.py
>>> @@ -89,7 +89,10 @@ def get_target_endianness():
>>> def read_memoryview(inf, start, length):
>>> - return memoryview(inf.read_memory(start, length))
>>> + m = inf.read_memory(start, length)
>>> + if type(m) is memoryview:
>>> + return m
>>> + return memoryview(m)
>>> def read_u16(buffer, offset):
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3
2022-07-20 12:27 ` [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3 pngliu
2022-08-04 8:50 ` Peng Liu
@ 2022-08-31 15:01 ` Jan Kiszka
2022-09-01 2:29 ` Peng Liu
1 sibling, 1 reply; 12+ messages in thread
From: Jan Kiszka @ 2022-08-31 15:01 UTC (permalink / raw)
To: pngliu, kbingham, Stephen Boyd; +Cc: linux-kernel, Peng Liu
On 20.07.22 14:27, pngliu@hotmail.com wrote:
> From: Peng Liu <liupeng17@lenovo.com>
>
> Below incompatibilities between Python2 and Python3 made lx-timerlist
> fail to run under Python3.
>
> o xrange() is replaced by range() in Python3
> o bytes and str are different types in Python3
> o the return value of Inferior.read_memory() is memoryview object in
> Python3
Means this only ever worked with Python2? And we now hard-switch it to
Python3? Not voting against this, just confused if it was like this so far.
Jan
>
> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
> ---
> scripts/gdb/linux/timerlist.py | 4 +++-
> scripts/gdb/linux/utils.py | 5 ++++-
> 2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/scripts/gdb/linux/timerlist.py b/scripts/gdb/linux/timerlist.py
> index 44e39dc3eb64..8281da068c5b 100644
> --- a/scripts/gdb/linux/timerlist.py
> +++ b/scripts/gdb/linux/timerlist.py
> @@ -72,7 +72,7 @@ def print_cpu(hrtimer_bases, cpu, max_clock_bases):
> ts = cpus.per_cpu(tick_sched_ptr, cpu)
>
> text = "cpu: {}\n".format(cpu)
> - for i in xrange(max_clock_bases):
> + for i in range(max_clock_bases):
> text += " clock {}:\n".format(i)
> text += print_base(cpu_base['clock_base'][i])
>
> @@ -157,6 +157,8 @@ def pr_cpumask(mask):
> num_bytes = (nr_cpu_ids + 7) / 8
> buf = utils.read_memoryview(inf, bits, num_bytes).tobytes()
> buf = binascii.b2a_hex(buf)
> + if type(buf) is not str:
> + buf=buf.decode()
>
> chunks = []
> i = num_bytes
> diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py
> index ff7c1799d588..db59f986c7fd 100644
> --- a/scripts/gdb/linux/utils.py
> +++ b/scripts/gdb/linux/utils.py
> @@ -89,7 +89,10 @@ def get_target_endianness():
>
>
> def read_memoryview(inf, start, length):
> - return memoryview(inf.read_memory(start, length))
> + m = inf.read_memory(start, length)
> + if type(m) is memoryview:
> + return m
> + return memoryview(m)
>
>
> def read_u16(buffer, offset):
--
Siemens AG, Technology
Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3
2022-08-31 15:01 ` Jan Kiszka
@ 2022-09-01 2:29 ` Peng Liu
0 siblings, 0 replies; 12+ messages in thread
From: Peng Liu @ 2022-09-01 2:29 UTC (permalink / raw)
To: Jan Kiszka, kbingham, Stephen Boyd; +Cc: linux-kernel, Peng Liu
On 2022/8/31 23:01, Jan Kiszka wrote:
> On 20.07.22 14:27, pngliu@hotmail.com wrote:
>> From: Peng Liu <liupeng17@lenovo.com>
>>
>> Below incompatibilities between Python2 and Python3 made lx-timerlist
>> fail to run under Python3.
>>
>> o xrange() is replaced by range() in Python3
>> o bytes and str are different types in Python3
>> o the return value of Inferior.read_memory() is memoryview object in
>> Python3
> Means this only ever worked with Python2? And we now hard-switch it to
> Python3? Not voting against this, just confused if it was like this so far.
>
> Jan
I think so. I tried the other gdb scripts and they worked for both python2
and python3. I guess timerlist.py was initially tested only with a gdb
with python2 support built in but not one with python3 support built in.
>> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
>> ---
>> scripts/gdb/linux/timerlist.py | 4 +++-
>> scripts/gdb/linux/utils.py | 5 ++++-
>> 2 files changed, 7 insertions(+), 2 deletions(-)
>>
>> diff --git a/scripts/gdb/linux/timerlist.py b/scripts/gdb/linux/timerlist.py
>> index 44e39dc3eb64..8281da068c5b 100644
>> --- a/scripts/gdb/linux/timerlist.py
>> +++ b/scripts/gdb/linux/timerlist.py
>> @@ -72,7 +72,7 @@ def print_cpu(hrtimer_bases, cpu, max_clock_bases):
>> ts = cpus.per_cpu(tick_sched_ptr, cpu)
>>
>> text = "cpu: {}\n".format(cpu)
>> - for i in xrange(max_clock_bases):
>> + for i in range(max_clock_bases):
>> text += " clock {}:\n".format(i)
>> text += print_base(cpu_base['clock_base'][i])
>>
>> @@ -157,6 +157,8 @@ def pr_cpumask(mask):
>> num_bytes = (nr_cpu_ids + 7) / 8
>> buf = utils.read_memoryview(inf, bits, num_bytes).tobytes()
>> buf = binascii.b2a_hex(buf)
>> + if type(buf) is not str:
>> + buf=buf.decode()
>>
>> chunks = []
>> i = num_bytes
>> diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py
>> index ff7c1799d588..db59f986c7fd 100644
>> --- a/scripts/gdb/linux/utils.py
>> +++ b/scripts/gdb/linux/utils.py
>> @@ -89,7 +89,10 @@ def get_target_endianness():
>>
>>
>> def read_memoryview(inf, start, length):
>> - return memoryview(inf.read_memory(start, length))
>> + m = inf.read_memory(start, length)
>> + if type(m) is memoryview:
>> + return m
>> + return memoryview(m)
>>
>>
>> def read_u16(buffer, offset):
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 3/3] scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing
[not found] <20220720122711.6174-1-pngliu@hotmail.com>
2022-07-20 12:27 ` [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3 pngliu
@ 2022-07-20 12:27 ` pngliu
2022-08-04 8:50 ` Peng Liu
2022-08-31 15:03 ` Jan Kiszka
1 sibling, 2 replies; 12+ messages in thread
From: pngliu @ 2022-07-20 12:27 UTC (permalink / raw)
To: jan.kiszka, kbingham; +Cc: linux-kernel, Peng Liu
From: Peng Liu <liupeng17@lenovo.com>
HRTIMER_MAX_CLOCK_BASES is of enum type hrtimer_base_type. To print
it as an integer, HRTIMER_MAX_CLOCK_BASES should be converted first.
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
---
scripts/gdb/linux/timerlist.py | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/scripts/gdb/linux/timerlist.py b/scripts/gdb/linux/timerlist.py
index 8281da068c5b..249f0e804b24 100644
--- a/scripts/gdb/linux/timerlist.py
+++ b/scripts/gdb/linux/timerlist.py
@@ -188,7 +188,8 @@ class LxTimerList(gdb.Command):
max_clock_bases = gdb.parse_and_eval("HRTIMER_MAX_CLOCK_BASES")
text = "Timer List Version: gdb scripts\n"
- text += "HRTIMER_MAX_CLOCK_BASES: {}\n".format(max_clock_bases)
+ text += "HRTIMER_MAX_CLOCK_BASES: {}\n".format(
+ max_clock_bases.type.fields()[max_clock_bases].enumval)
text += "now at {} nsecs\n".format(ktime_get())
for cpu in cpus.each_online_cpu():
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing
2022-07-20 12:27 ` [PATCH 3/3] scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing pngliu
@ 2022-08-04 8:50 ` Peng Liu
2022-08-22 9:30 ` Peng Liu
2022-08-31 15:03 ` Jan Kiszka
1 sibling, 1 reply; 12+ messages in thread
From: Peng Liu @ 2022-08-04 8:50 UTC (permalink / raw)
To: jan.kiszka, kbingham; +Cc: linux-kernel, Peng Liu
On 2022/7/20 20:27, pngliu@hotmail.com wrote:
> From: Peng Liu <liupeng17@lenovo.com>
>
> HRTIMER_MAX_CLOCK_BASES is of enum type hrtimer_base_type. To print
> it as an integer, HRTIMER_MAX_CLOCK_BASES should be converted first.
>
> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
> ---
> scripts/gdb/linux/timerlist.py | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/scripts/gdb/linux/timerlist.py b/scripts/gdb/linux/timerlist.py
> index 8281da068c5b..249f0e804b24 100644
> --- a/scripts/gdb/linux/timerlist.py
> +++ b/scripts/gdb/linux/timerlist.py
> @@ -188,7 +188,8 @@ class LxTimerList(gdb.Command):
> max_clock_bases = gdb.parse_and_eval("HRTIMER_MAX_CLOCK_BASES")
>
> text = "Timer List Version: gdb scripts\n"
> - text += "HRTIMER_MAX_CLOCK_BASES: {}\n".format(max_clock_bases)
> + text += "HRTIMER_MAX_CLOCK_BASES: {}\n".format(
> + max_clock_bases.type.fields()[max_clock_bases].enumval)
> text += "now at {} nsecs\n".format(ktime_get())
>
> for cpu in cpus.each_online_cpu():
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing
2022-08-04 8:50 ` Peng Liu
@ 2022-08-22 9:30 ` Peng Liu
2022-08-31 2:02 ` Peng Liu
0 siblings, 1 reply; 12+ messages in thread
From: Peng Liu @ 2022-08-22 9:30 UTC (permalink / raw)
To: jan.kiszka; +Cc: kbingham, linux-kernel, Peng Liu
ping
On 2022/8/4 16:50, Peng Liu wrote:
>
> On 2022/7/20 20:27, pngliu@hotmail.com wrote:
>> From: Peng Liu <liupeng17@lenovo.com>
>>
>> HRTIMER_MAX_CLOCK_BASES is of enum type hrtimer_base_type. To print
>> it as an integer, HRTIMER_MAX_CLOCK_BASES should be converted first.
>>
>> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
>> ---
>> scripts/gdb/linux/timerlist.py | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/scripts/gdb/linux/timerlist.py
>> b/scripts/gdb/linux/timerlist.py
>> index 8281da068c5b..249f0e804b24 100644
>> --- a/scripts/gdb/linux/timerlist.py
>> +++ b/scripts/gdb/linux/timerlist.py
>> @@ -188,7 +188,8 @@ class LxTimerList(gdb.Command):
>> max_clock_bases =
>> gdb.parse_and_eval("HRTIMER_MAX_CLOCK_BASES")
>> text = "Timer List Version: gdb scripts\n"
>> - text += "HRTIMER_MAX_CLOCK_BASES: {}\n".format(max_clock_bases)
>> + text += "HRTIMER_MAX_CLOCK_BASES: {}\n".format(
>> + max_clock_bases.type.fields()[max_clock_bases].enumval)
>> text += "now at {} nsecs\n".format(ktime_get())
>> for cpu in cpus.each_online_cpu():
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing
2022-08-22 9:30 ` Peng Liu
@ 2022-08-31 2:02 ` Peng Liu
0 siblings, 0 replies; 12+ messages in thread
From: Peng Liu @ 2022-08-31 2:02 UTC (permalink / raw)
To: kbingham; +Cc: jan.kiszka, linux-kernel, Peng Liu
ping
On 2022/8/22 17:30, Peng Liu wrote:
> ping
>
> On 2022/8/4 16:50, Peng Liu wrote:
>>
>> On 2022/7/20 20:27, pngliu@hotmail.com wrote:
>>> From: Peng Liu <liupeng17@lenovo.com>
>>>
>>> HRTIMER_MAX_CLOCK_BASES is of enum type hrtimer_base_type. To print
>>> it as an integer, HRTIMER_MAX_CLOCK_BASES should be converted first.
>>>
>>> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
>>> ---
>>> scripts/gdb/linux/timerlist.py | 3 ++-
>>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/scripts/gdb/linux/timerlist.py
>>> b/scripts/gdb/linux/timerlist.py
>>> index 8281da068c5b..249f0e804b24 100644
>>> --- a/scripts/gdb/linux/timerlist.py
>>> +++ b/scripts/gdb/linux/timerlist.py
>>> @@ -188,7 +188,8 @@ class LxTimerList(gdb.Command):
>>> max_clock_bases =
>>> gdb.parse_and_eval("HRTIMER_MAX_CLOCK_BASES")
>>> text = "Timer List Version: gdb scripts\n"
>>> - text += "HRTIMER_MAX_CLOCK_BASES:
>>> {}\n".format(max_clock_bases)
>>> + text += "HRTIMER_MAX_CLOCK_BASES: {}\n".format(
>>> + max_clock_bases.type.fields()[max_clock_bases].enumval)
>>> text += "now at {} nsecs\n".format(ktime_get())
>>> for cpu in cpus.each_online_cpu():
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing
2022-07-20 12:27 ` [PATCH 3/3] scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing pngliu
2022-08-04 8:50 ` Peng Liu
@ 2022-08-31 15:03 ` Jan Kiszka
1 sibling, 0 replies; 12+ messages in thread
From: Jan Kiszka @ 2022-08-31 15:03 UTC (permalink / raw)
To: pngliu, kbingham, Andrew Morton; +Cc: linux-kernel, Peng Liu, Stephen Boyd
On 20.07.22 14:27, pngliu@hotmail.com wrote:
> From: Peng Liu <liupeng17@lenovo.com>
>
> HRTIMER_MAX_CLOCK_BASES is of enum type hrtimer_base_type. To print
> it as an integer, HRTIMER_MAX_CLOCK_BASES should be converted first.
>
> Signed-off-by: Peng Liu <liupeng17@lenovo.com>
> ---
> scripts/gdb/linux/timerlist.py | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/scripts/gdb/linux/timerlist.py b/scripts/gdb/linux/timerlist.py
> index 8281da068c5b..249f0e804b24 100644
> --- a/scripts/gdb/linux/timerlist.py
> +++ b/scripts/gdb/linux/timerlist.py
> @@ -188,7 +188,8 @@ class LxTimerList(gdb.Command):
> max_clock_bases = gdb.parse_and_eval("HRTIMER_MAX_CLOCK_BASES")
>
> text = "Timer List Version: gdb scripts\n"
> - text += "HRTIMER_MAX_CLOCK_BASES: {}\n".format(max_clock_bases)
> + text += "HRTIMER_MAX_CLOCK_BASES: {}\n".format(
> + max_clock_bases.type.fields()[max_clock_bases].enumval)
> text += "now at {} nsecs\n".format(ktime_get())
>
> for cpu in cpus.each_online_cpu():
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Jan
--
Siemens AG, Technology
Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3
@ 2023-03-21 6:19 Peng Liu
0 siblings, 0 replies; 12+ messages in thread
From: Peng Liu @ 2023-03-21 6:19 UTC (permalink / raw)
Cc: jan.kiszka, kbingham, akpm, linux-kernel, liupeng17
From: Peng Liu <liupeng17@lenovo.com>
Below incompatibilities between Python2 and Python3 made lx-timerlist
fail to run under Python3.
o xrange() is replaced by range() in Python3
o bytes and str are different types in Python3
o the return value of Inferior.read_memory() is memoryview object in
Python3
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
---
scripts/gdb/linux/timerlist.py | 4 +++-
scripts/gdb/linux/utils.py | 5 ++++-
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/scripts/gdb/linux/timerlist.py b/scripts/gdb/linux/timerlist.py
index 44e39dc3eb64..8281da068c5b 100644
--- a/scripts/gdb/linux/timerlist.py
+++ b/scripts/gdb/linux/timerlist.py
@@ -72,7 +72,7 @@ def print_cpu(hrtimer_bases, cpu, max_clock_bases):
ts = cpus.per_cpu(tick_sched_ptr, cpu)
text = "cpu: {}\n".format(cpu)
- for i in xrange(max_clock_bases):
+ for i in range(max_clock_bases):
text += " clock {}:\n".format(i)
text += print_base(cpu_base['clock_base'][i])
@@ -157,6 +157,8 @@ def pr_cpumask(mask):
num_bytes = (nr_cpu_ids + 7) / 8
buf = utils.read_memoryview(inf, bits, num_bytes).tobytes()
buf = binascii.b2a_hex(buf)
+ if type(buf) is not str:
+ buf=buf.decode()
chunks = []
i = num_bytes
diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py
index 1553f68716cc..7f36aee32ac6 100644
--- a/scripts/gdb/linux/utils.py
+++ b/scripts/gdb/linux/utils.py
@@ -88,7 +88,10 @@ def get_target_endianness():
def read_memoryview(inf, start, length):
- return memoryview(inf.read_memory(start, length))
+ m = inf.read_memory(start, length)
+ if type(m) is memoryview:
+ return m
+ return memoryview(m)
def read_u16(buffer, offset):
--
2.34.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
end of thread, other threads:[~2023-03-21 6:19 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20220720122711.6174-1-pngliu@hotmail.com>
2022-07-20 12:27 ` [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3 pngliu
2022-08-04 8:50 ` Peng Liu
2022-08-22 9:30 ` Peng Liu
2022-08-31 2:02 ` Peng Liu
2022-08-31 15:01 ` Jan Kiszka
2022-09-01 2:29 ` Peng Liu
2022-07-20 12:27 ` [PATCH 3/3] scripts/gdb: fix lx-timerlist for HRTIMER_MAX_CLOCK_BASES printing pngliu
2022-08-04 8:50 ` Peng Liu
2022-08-22 9:30 ` Peng Liu
2022-08-31 2:02 ` Peng Liu
2022-08-31 15:03 ` Jan Kiszka
2023-03-21 6:19 [PATCH 2/3] scripts/gdb: fix lx-timerlist for Python3 Peng Liu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).