From: Johan Hovold <email@example.com> To: Marc Zyngier <firstname.lastname@example.org> Cc: Johan Hovold <email@example.com>, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, Linus Walleij <email@example.com>, Bartosz Golaszewski <firstname.lastname@example.org>, Greg Kroah-Hartman <email@example.com>, firstname.lastname@example.org Subject: Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes Date: Mon, 7 Dec 2020 16:08:05 +0100 [thread overview] Message-ID: <X85FVc07Hc7LQQU8@localhost> (raw) In-Reply-To: <email@example.com> On Mon, Dec 07, 2020 at 02:41:03PM +0000, Marc Zyngier wrote: > On 2020-12-07 14:01, Johan Hovold wrote: > > On Fri, Dec 04, 2020 at 04:47:35PM +0000, Marc Zyngier wrote: > >> Having recently tried to use the CBUS GPIOs that come thanks to the > >> ftdio_sio driver, it occurred to me that the driver has a couple of > >> usability issues: > >> > >> - it advertises potential GPIOs that are reserved to other uses (LED > >> control, or something else) > > > > Consider the alternative, that the gpio offsets (for CBUS0, CBUS1, > > CBUS2 > > or CBUS4) varies depending on how the pins have been muxed. Hardly very > > user friendly. > > That's not what I suggest. If you want fixed GPIO offsets, fine by me. > But telling the user "these are GPIOs you can use", and then > "on second though, you can't" is not exactly consistent. It's really no different from any other gpio chip which registers all its lines, including those which may have been muxed for other purposes. > >> - it returns an odd error (-ENODEV), instead of the expected -EINVAL > >> when a line is unavailable, leading to a difficult diagnostic > > > > Hmm, maybe. Several gpio driver return -ENODEV when trying to request > > reserved pins. Even gpiolib returns -ENODEV when a pins is not yet > > available due to probe deferal. > > -ENODEV really means "no GPIOchip" in this context. The fact that > other drivers return -ENODEV for reserved pins looks like a bug to me. No, the chip is there. The -ENODEV is what you get when requesting the line, because the line isn't available. > > -EBUSY could also be an alternative, but that's used to indicate that a > > line is already in use as a gpio. > > Or something else. Which is exactly the case, as it's been allocated > to another function. Right, there are invalid requests (e.g. requesting line five of a four line chip), lines that are already in use, and lines not available due to muxing. And then there's the question of whether to use the same or distinct errnos for these. I believe using distinct errnos provides more feedback, but we can certainly pick another errno for this if it's really that confusing. > >> We address the issues in a number of ways: > >> > >> - Stop reporting invalid GPIO lines as valid to userspace. It > >> definitely seems odd to do so. Instead, report the line as being > >> used, making the userspace interface a bit more consistent. > >> > >> - Implement the init_valid_mask() callback in the ftdi_sio driver, > >> allowing it to report which lines are actually valid. > >> > >> - As suggested by Linus, give an indication to the user of why some of > >> the GPIO lines are unavailable, and point them to a useful tool > >> (once per boot). It is a bit sad that there next to no documentation > >> on how to use these CBUS pins. > > > > Don't be sad, Marc; write some documentation. ;) > > I sure will, right after I have fixed the rest of the kernel bugs > I have introduced. With a bit of luck, that's right after I finally > kick the bucket. Hear, hear. Johan
next prev parent reply other threads:[~2020-12-07 15:08 UTC|newest] Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-04 16:47 Marc Zyngier 2020-12-04 16:47 ` [PATCH 1/4] gpiolib: cdev: Flag invalid GPIOs as used Marc Zyngier 2020-12-07 14:16 ` Johan Hovold 2020-12-07 14:59 ` Marc Zyngier 2020-12-09 9:25 ` Linus Walleij 2020-12-04 16:47 ` [PATCH 2/4] USB: serial: ftdi_sio: Report the valid GPIO lines to gpiolib Marc Zyngier 2020-12-09 9:28 ` Linus Walleij 2020-12-04 16:47 ` [PATCH 3/4] USB: serial: ftdi_sio: Log the CBUS GPIO validity Marc Zyngier 2020-12-07 14:29 ` Johan Hovold 2020-12-07 15:00 ` Marc Zyngier 2020-12-07 15:19 ` Johan Hovold 2020-12-09 9:35 ` Linus Walleij 2020-12-09 17:05 ` Johan Hovold 2020-12-09 17:39 ` Johan Hovold 2020-12-04 16:47 ` [PATCH 4/4] USB: serial: ftdi_sio: Drop GPIO line checking dead code Marc Zyngier 2020-12-07 9:55 ` [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes Andy Shevchenko 2020-12-07 14:01 ` Johan Hovold 2020-12-07 14:41 ` Marc Zyngier 2020-12-07 15:08 ` Johan Hovold [this message] 2020-12-07 15:34 ` Marc Zyngier 2020-12-07 15:49 ` Johan Hovold 2020-12-09 9:20 ` Linus Walleij 2020-12-09 15:42 ` Johan Hovold
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=X85FVc07Hc7LQQU8@localhost \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --subject='Re: [PATCH 0/4] USB: ftdio_sio: GPIO validity fixes' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).