* [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie @ 2022-11-25 9:44 Owen Yang 2022-11-25 9:44 ` [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie Owen Yang ` (3 more replies) 0 siblings, 4 replies; 7+ messages in thread From: Owen Yang @ 2022-11-25 9:44 UTC (permalink / raw) To: LKML Cc: Abner Yen, Gavin Lee, Harvey, Matthias Kaehlcke, Stephen Boyd, Bob Moragues, Owen Yang, Andy Gross, Bjorn Andersson, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm Add an entry in the device tree binding for sc7280-zombie. Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com> --- (no changes since v1) Documentation/devicetree/bindings/arm/qcom.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 1b5ac6b02bc5..46ec61e3dec3 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -595,6 +595,16 @@ properties: - const: google,villager-sku512 - const: qcom,sc7280 + - description: Google Zombie (newest rev) + items: + - const: google,zombie + - const: qcom,sc7280 + + - description: Google Zombie with LTE (newest rev) + items: + - const: google,zombie-sku512 + - const: qcom,sc7280 + - items: - enum: - lenovo,flex-5g -- 2.17.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie 2022-11-25 9:44 [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie Owen Yang @ 2022-11-25 9:44 ` Owen Yang 2022-11-28 16:55 ` Matthias Kaehlcke 2022-11-28 16:58 ` Doug Anderson 2022-11-25 10:13 ` [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie Krzysztof Kozlowski ` (2 subsequent siblings) 3 siblings, 2 replies; 7+ messages in thread From: Owen Yang @ 2022-11-25 9:44 UTC (permalink / raw) To: LKML Cc: Abner Yen, Gavin Lee, Harvey, Matthias Kaehlcke, Stephen Boyd, Bob Moragues, Owen Yang, Andy Gross, Bjorn Andersson, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm Add DT for sc7280-herobrine-zombie Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com> --- Changes in v5: - Overwrite pm8350c_pwm_backlight setting in sc7280-herobrine-zombie.dtsi for chrome zombie. v5. - Dropping the redundant 'DT binding for' as requested by Krzysztof. v4. - Adding an empty line here before "/dts-v1/;" in "sc7280-herobrine-zombie-lte.dts", "sc7280-herobrine-zombie.dts" as requested by Matthias. v4. - Deleteing "/dts-v1/;" in "sc7280-herobrine-zombie.dtsi" as requested by Matthias. v4. - Droping changing file path in description. v3. as requested by Matthias. v3. - Changing Patch order, binding patch first and dt file second, as requested by Douglas. v2. - Adding "arm64: dts: qcom: sc7280:" in dt patch ${SUBJECT}, as requested by Douglas. v2. - Adding "dt-bindings: arm: qcom:" in bind patch ${SUBJECT}, as requested by Douglas. v2. - Adding '#include "sc7280-herobrine-wifi-sku.dtsi"' in sc7280-herobrine-zombie.dts, as requested by Douglas. v2. - Adding "(newest rev)" for zombie entry description in qcom.yaml, as requested by Douglas. v2. - Adding "post-power-on-delay-ms = <100>;" for trackpad in "sc7280-herobrine-zombie.dtsi". v2 - Changing "vcc-supply" to "vdd-supply" for trackpad in "sc7280-herobrine-zombie.dtsi", as requested by Douglas. v2. arch/arm64/boot/dts/qcom/Makefile | 2 + .../dts/qcom/sc7280-herobrine-zombie-lte.dts | 16 + .../boot/dts/qcom/sc7280-herobrine-zombie.dts | 16 + .../dts/qcom/sc7280-herobrine-zombie.dtsi | 313 ++++++++++++++++++ 4 files changed, 347 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d7669a7cee9f..84237ebd76f4 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -109,6 +109,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts new file mode 100644 index 000000000000..c9fe64529555 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-zombie.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + model = "Google Zombie with LTE"; + compatible = "google,zombie-sku512", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts new file mode 100644 index 000000000000..0246c12b2f40 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine-zombie.dtsi" +#include "sc7280-herobrine-wifi-sku.dtsi" + +/ { + model = "Google Zombie"; + compatible = "google,zombie", "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi new file mode 100644 index 000000000000..d10362ecdafb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Zombie board device tree source + * + * Copyright 2022 Google LLC. + */ + +#include "sc7280-herobrine.dtsi" +#include "sc7280-herobrine-audio-rt5682.dtsi" + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + clock-frequency = <400000>; + status = "okay"; + + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x01>; + vdd-supply = <&pp3300_z1>; + post-power-on-delay-ms = <100>; + + wakeup-source; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&pm8350c_pwm_backlight{ + pwms = <&pm8350c_pwm 3 200000>; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "US_EURO_HS_SEL", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie 2022-11-25 9:44 ` [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie Owen Yang @ 2022-11-28 16:55 ` Matthias Kaehlcke 2022-11-28 16:58 ` Doug Anderson 1 sibling, 0 replies; 7+ messages in thread From: Matthias Kaehlcke @ 2022-11-28 16:55 UTC (permalink / raw) To: Owen Yang Cc: LKML, Abner Yen, Gavin Lee, Harvey, Stephen Boyd, Bob Moragues, Andy Gross, Bjorn Andersson, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm Hi Owen, On Fri, Nov 25, 2022 at 05:44:25PM +0800, Owen Yang wrote: > Add DT for sc7280-herobrine-zombie > > Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com> > Changes in v5: > - Overwrite pm8350c_pwm_backlight setting in sc7280-herobrine-zombie.dtsi for chrome zombie. v5. > - Dropping the redundant 'DT binding for' as requested by Krzysztof. v4. > - Adding an empty line here before "/dts-v1/;" in "sc7280-herobrine-zombie-lte.dts", "sc7280-herobrine-zombie.dts" as requested by Matthias. v4. > - Deleteing "/dts-v1/;" in "sc7280-herobrine-zombie.dtsi" as requested by Matthias. v4. > - Droping changing file path in description. v3. as requested by Matthias. v3. > - Changing Patch order, binding patch first and dt file second, as requested by Douglas. v2. > - Adding "arm64: dts: qcom: sc7280:" in dt patch ${SUBJECT}, as requested by Douglas. v2. > - Adding "dt-bindings: arm: qcom:" in bind patch ${SUBJECT}, as requested by Douglas. v2. > - Adding '#include "sc7280-herobrine-wifi-sku.dtsi"' in sc7280-herobrine-zombie.dts, as requested by Douglas. v2. > - Adding "(newest rev)" for zombie entry description in qcom.yaml, as requested by Douglas. v2. > - Adding "post-power-on-delay-ms = <100>;" for trackpad in "sc7280-herobrine-zombie.dtsi". v2 > - Changing "vcc-supply" to "vdd-supply" for trackpad in "sc7280-herobrine-zombie.dtsi", as requested by Douglas. v2. For future patches please better organize the change log like this: Changes in v5: - Overwrite pm8350c_pwm_backlight setting in sc7280-herobrine-zombie.dtsi for chrome zombie Changes in v4: - Dropping the redundant 'DT binding for' as requested by Krzysztof - Adding an empty line here before "/dts-v1/;" in "sc7280-herobrine-zombie-lte.dts", "sc7280-herobrine-zombie.dts" as requested by Matthias - Deleteing "/dts-v1/;" in "sc7280-herobrine-zombie.dtsi" as requested by Matthias ... If you are using patman you can keep the existing 'Commit-changes: vN' entries from the previous versions and just add a new entry for the current version. No need to re-spin the patches just for change log. > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi > new file mode 100644 > index 000000000000..d10362ecdafb > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi > > ... > > +&pm8350c_pwm_backlight{ > + pwms = <&pm8350c_pwm 3 200000>; > +}; Why is this change needed? ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie 2022-11-25 9:44 ` [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie Owen Yang 2022-11-28 16:55 ` Matthias Kaehlcke @ 2022-11-28 16:58 ` Doug Anderson 1 sibling, 0 replies; 7+ messages in thread From: Doug Anderson @ 2022-11-28 16:58 UTC (permalink / raw) To: Owen Yang Cc: LKML, Abner Yen, Gavin Lee, Harvey, Matthias Kaehlcke, Stephen Boyd, Bob Moragues, Andy Gross, Bjorn Andersson, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm Hi, On Fri, Nov 25, 2022 at 1:45 AM Owen Yang <ecs.taipeikernel@gmail.com> wrote: > > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi > new file mode 100644 > index 000000000000..d10362ecdafb > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi > @@ -0,0 +1,313 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Google Zombie board device tree source > + * > + * Copyright 2022 Google LLC. > + */ > + > +#include "sc7280-herobrine.dtsi" > +#include "sc7280-herobrine-audio-rt5682.dtsi" > + > +/* > + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES > + * > + * Sort order matches the order in the parent files (parents before children). > + */ > + > +&pp3300_codec { > + status = "okay"; > +}; > + > +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ > + > +ap_tp_i2c: &i2c0 { > + clock-frequency = <400000>; > + status = "okay"; > + > + trackpad: trackpad@15 { > + compatible = "hid-over-i2c"; > + reg = <0x15>; > + pinctrl-names = "default"; > + pinctrl-0 = <&tp_int_odl>; > + > + interrupt-parent = <&tlmm>; > + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; > + > + hid-descr-addr = <0x01>; > + vdd-supply = <&pp3300_z1>; > + post-power-on-delay-ms = <100>; Do you have any documentation pointing to 100 ms really being needed here? I know that leaving this number off is rarely a good idea, but arbitrarily picking 100 isn't great either. It could either be much too big or much too small. > + wakeup-source; > + }; > +}; > + > +&ap_sar_sensor_i2c { > + status = "okay"; > +}; > + > +&ap_sar_sensor0 { > + status = "okay"; > +}; > + > +&ap_sar_sensor1 { > + status = "okay"; > +}; > + > +&mdss_edp { > + status = "okay"; > +}; > + > +&mdss_edp_phy { > + status = "okay"; > +}; > + > +/* For nvme */ > +&pcie1 { > + status = "okay"; > +}; > + > +/* For nvme */ > +&pcie1_phy { > + status = "okay"; > +}; > + > +&pwmleds { > + status = "okay"; > +}; > + > +/* For eMMC */ > +&sdhc_1 { > + status = "okay"; > +}; > + > +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ > + > +&ts_rst_conn { > + bias-disable; > +}; > + > +/* PINCTRL - BOARD-SPECIFIC */ > + > +/* > + * Methodology for gpio-line-names: > + * - If a pin goes to herobrine board and is named it gets that name. > + * - If a pin goes to herobrine board and is not named, it gets no name. > + * - If a pin is totally internal to Qcard then it gets Qcard name. > + * - If a pin is not hooked up on Qcard, it gets no name. > + */ > + > +&pm8350c_gpios { > + gpio-line-names = "FLASH_STROBE_1", /* 1 */ > + "AP_SUSPEND", > + "PM8008_1_RST_N", > + "", > + "", > + "", > + "PMIC_EDP_BL_EN", > + "PMIC_EDP_BL_PWM", > + ""; > +}; > + > +&pm8350c_pwm_backlight{ > + pwms = <&pm8350c_pwm 3 200000>; > +}; This is not a pinctrl update so it doesn't belong in the "PINCTRL" section. Please move this above right before the "pwmleds" node. Having a comment like "Set the PWM period to 200 microseconds (5kHz duty cycle") wouldn't hurt either. > +&tlmm { > + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ > + "AP_TP_I2C_SCL", > + "SSD_RST_L", > + "PE_WAKE_ODL", > + "AP_SAR_SDA", > + "AP_SAR_SCL", > + "PRB_SC_GPIO_6", > + "TP_INT_ODL", > + "HP_I2C_SDA", > + "HP_I2C_SCL", > + > + "GNSS_L1_EN", /* 10 */ > + "GNSS_L5_EN", > + "SPI_AP_MOSI", > + "SPI_AP_MISO", > + "SPI_AP_CLK", > + "SPI_AP_CS0_L", > + /* > + * AP_FLASH_WP is crossystem ABI. Schematics > + * call it BIOS_FLASH_WP_OD. > + */ > + "AP_FLASH_WP", > + "", > + "AP_EC_INT_L", > + "", > + > + "UF_CAM_RST_L", /* 20 */ > + "WF_CAM_RST_L", > + "UART_AP_TX_DBG_RX", > + "UART_DBG_TX_AP_RX", > + "", > + "PM8008_IRQ_1", > + "HOST2WLAN_SOL", > + "WLAN2HOST_SOL", > + "MOS_BT_UART_CTS", > + "MOS_BT_UART_RFR", > + > + "MOS_BT_UART_TX", /* 30 */ > + "MOS_BT_UART_RX", > + "PRB_SC_GPIO_32", > + "HUB_RST_L", > + "", > + "", > + "AP_SPI_FP_MISO", > + "AP_SPI_FP_MOSI", > + "AP_SPI_FP_CLK", > + "AP_SPI_FP_CS_L", > + > + "AP_EC_SPI_MISO", /* 40 */ > + "AP_EC_SPI_MOSI", > + "AP_EC_SPI_CLK", > + "AP_EC_SPI_CS_L", > + "LCM_RST_L", > + "EARLY_EUD_N", > + "", > + "DP_HOT_PLUG_DET", > + "IO_BRD_MLB_ID0", > + "IO_BRD_MLB_ID1", > + > + "IO_BRD_MLB_ID2", /* 50 */ > + "SSD_EN", > + "TS_I2C_SDA_CONN", > + "TS_I2C_CLK_CONN", > + "TS_RST_CONN", > + "TS_INT_CONN", > + "AP_I2C_TPM_SDA", > + "AP_I2C_TPM_SCL", > + "PRB_SC_GPIO_58", > + "PRB_SC_GPIO_59", > + > + "EDP_HOT_PLUG_DET_N", /* 60 */ > + "FP_TO_AP_IRQ_L", > + "", > + "AMP_EN", > + "CAM0_MCLK_GPIO_64", > + "CAM1_MCLK_GPIO_65", > + "WF_CAM_MCLK", > + "PRB_SC_GPIO_67", > + "FPMCU_BOOT0", > + "UF_CAM_SDA", > + > + "UF_CAM_SCL", /* 70 */ > + "", > + "", > + "WF_CAM_SDA", > + "WF_CAM_SCL", > + "", > + "", > + "EN_FP_RAILS", > + "FP_RST_L", > + "PCIE1_CLKREQ_ODL", > + > + "EN_PP3300_DX_EDP", /* 80 */ > + "US_EURO_HS_SEL", > + "FORCED_USB_BOOT", > + "WCD_RESET_N", > + "MOS_WLAN_EN", > + "MOS_BT_EN", > + "MOS_SW_CTRL", > + "MOS_PCIE0_RST", > + "MOS_PCIE0_CLKREQ_N", > + "MOS_PCIE0_WAKE_N", > + > + "MOS_LAA_AS_EN", /* 90 */ > + "SD_CD_ODL", > + "", > + "", > + "MOS_BT_WLAN_SLIMBUS_CLK", > + "MOS_BT_WLAN_SLIMBUS_DAT0", > + "HP_MCLK", > + "HP_BCLK", > + "HP_DOUT", > + "HP_DIN", > + > + "HP_LRCLK", /* 100 */ > + "HP_IRQ", > + "", > + "", > + "GSC_AP_INT_ODL", > + "EN_PP3300_CODEC", > + "AMP_BCLK", > + "AMP_DIN", > + "AMP_LRCLK", > + "UIM1_DATA_GPIO_109", > + > + "UIM1_CLK_GPIO_110", /* 110 */ > + "UIM1_RESET_GPIO_111", > + "PRB_SC_GPIO_112", > + "UIM0_DATA", > + "UIM0_CLK", > + "UIM0_RST", > + "UIM0_PRESENT_ODL", > + "SDM_RFFE0_CLK", > + "SDM_RFFE0_DATA", > + "WF_CAM_EN", > + > + "FASTBOOT_SEL_0", /* 120 */ > + "SC_GPIO_121", > + "FASTBOOT_SEL_1", > + "SC_GPIO_123", > + "FASTBOOT_SEL_2", > + "SM_RFFE4_CLK_GRFC_8", > + "SM_RFFE4_DATA_GRFC_9", > + "WLAN_COEX_UART1_RX", > + "WLAN_COEX_UART1_TX", > + "PRB_SC_GPIO_129", > + > + "LCM_ID0", /* 130 */ > + "LCM_ID1", > + "", > + "SDR_QLINK_REQ", > + "SDR_QLINK_EN", > + "QLINK0_WMSS_RESET_N", > + "SMR526_QLINK1_REQ", > + "SMR526_QLINK1_EN", > + "SMR526_QLINK1_WMSS_RESET_N", > + "PRB_SC_GPIO_139", > + > + "SAR1_IRQ_ODL", /* 140 */ > + "SAR0_IRQ_ODL", > + "PRB_SC_GPIO_142", > + "", > + "WCD_SWR_TX_CLK", > + "WCD_SWR_TX_DATA0", > + "WCD_SWR_TX_DATA1", > + "WCD_SWR_RX_CLK", > + "WCD_SWR_RX_DATA0", > + "WCD_SWR_RX_DATA1", > + > + "DMIC01_CLK", /* 150 */ > + "DMIC01_DATA", > + "DMIC23_CLK", > + "DMIC23_DATA", > + "", > + "", > + "EC_IN_RW_ODL", > + "HUB_EN", > + "WCD_SWR_TX_DATA2", > + "", > + > + "", /* 160 */ > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + > + "", /* 170 */ > + "MOS_BLE_UART_TX", > + "MOS_BLE_UART_RX", > + "", > + "", > + ""; There is still one extra entry in "gpio-line-names". Said another way, the max GPIO number on sc7280 is GPIO 174. As you can see above, GPIO 170 is unnamed (it has a blank string). GPIO 171 has the name "MOS_BLE_UART_TX", GPIO 172 has "MOS_BLE_UART_RX", and then you have blank names for GPIO 173, 174, and 175. ...but there is no GPIO 175. So, simply put, please remove one of the lines after the line with "MOS_BLE_UART_RX" -Doug ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie 2022-11-25 9:44 [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie Owen Yang 2022-11-25 9:44 ` [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie Owen Yang @ 2022-11-25 10:13 ` Krzysztof Kozlowski 2022-11-28 16:58 ` Doug Anderson 2022-11-28 17:16 ` Matthias Kaehlcke 3 siblings, 0 replies; 7+ messages in thread From: Krzysztof Kozlowski @ 2022-11-25 10:13 UTC (permalink / raw) To: Owen Yang, LKML Cc: Abner Yen, Gavin Lee, Harvey, Matthias Kaehlcke, Stephen Boyd, Bob Moragues, Andy Gross, Bjorn Andersson, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm On 25/11/2022 10:44, Owen Yang wrote: > Add an entry in the device tree binding for sc7280-zombie. > > Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com> > --- This is a friendly reminder during the review process. It looks like you received a tag and forgot to add it. If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540 If a tag was not added on purpose, please state why and what changed. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie 2022-11-25 9:44 [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie Owen Yang 2022-11-25 9:44 ` [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie Owen Yang 2022-11-25 10:13 ` [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie Krzysztof Kozlowski @ 2022-11-28 16:58 ` Doug Anderson 2022-11-28 17:16 ` Matthias Kaehlcke 3 siblings, 0 replies; 7+ messages in thread From: Doug Anderson @ 2022-11-28 16:58 UTC (permalink / raw) To: Owen Yang Cc: LKML, Abner Yen, Gavin Lee, Harvey, Matthias Kaehlcke, Stephen Boyd, Bob Moragues, Andy Gross, Bjorn Andersson, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm Hi, On Fri, Nov 25, 2022 at 1:44 AM Owen Yang <ecs.taipeikernel@gmail.com> wrote: > > Add an entry in the device tree binding for sc7280-zombie. Probably not worth spinning the patch for, but previously [0] Matthias requested that you say "Add entries" instead of "Add an entry". Please don't ignore reviewer feedback. > Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com> > --- > > (no changes since v1) Also not worth spinning the patch for, but your version history is lacking for this patch. The way patman works is that each patch should have its own version history. Thus in patch #1 you could have had: Series-changes: 2 - Adding "(newest rev)" for zombie entry description in qcom.yaml, as requested by Douglas. - Adding "dt-bindings: arm: qcom:" in bind patch ${SUBJECT}, as requested by Douglas - Changing Patch order, binding patch first and dt file second, as requested by Douglas Series-changes: 3 - Droping changing file path in description. v3. as requested by Matthias Series-changes: 4 - Dropping the redundant 'DT binding for' as requested by Krzysztof In patch #2 you would have done similar things but describe the things that happened to _that_ patch. Make sense? Note that "Series-changes" is different from some of the other tags in patman. Series-version should only be listed in one patch. I believe Series-to and Series-cc can be listed in multiple patches but they are all glommed together into one list. > Documentation/devicetree/bindings/arm/qcom.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) Reviewed-by: Douglas Anderson <dianders@chromium.org> [0] https://lore.kernel.org/r/Y3zZWWCJ8aYphD7f@google.com/ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie 2022-11-25 9:44 [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie Owen Yang ` (2 preceding siblings ...) 2022-11-28 16:58 ` Doug Anderson @ 2022-11-28 17:16 ` Matthias Kaehlcke 3 siblings, 0 replies; 7+ messages in thread From: Matthias Kaehlcke @ 2022-11-28 17:16 UTC (permalink / raw) To: Owen Yang Cc: LKML, Abner Yen, Gavin Lee, Harvey, Stephen Boyd, Bob Moragues, Andy Gross, Bjorn Andersson, Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm On Fri, Nov 25, 2022 at 05:44:24PM +0800, Owen Yang wrote: > Add an entry in the device tree binding for sc7280-zombie. > > Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com> > --- > > (no changes since v1) That is not correct. As far as I recall there were at least changes in the position at which the new entries are inserted and some changes in the commit message too. It's not super important for a trivial patch like this, but please make it a habit to post an accurate change log for each version. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-11-28 17:16 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-11-25 9:44 [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie Owen Yang 2022-11-25 9:44 ` [PATCH v5 2/2] arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie Owen Yang 2022-11-28 16:55 ` Matthias Kaehlcke 2022-11-28 16:58 ` Doug Anderson 2022-11-25 10:13 ` [PATCH v5 1/2] dt-bindings: arm: qcom: Add zombie Krzysztof Kozlowski 2022-11-28 16:58 ` Doug Anderson 2022-11-28 17:16 ` Matthias Kaehlcke
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).