From: Eric Schwarz <eas@sw-optimization.com>
To: Alan Tull <atull@kernel.org>
Cc: Anatolij Gustschin <agust@denx.de>,
Lee Jones <lee.jones@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Moritz Fischer <moritz.fischer@ettus.com>,
linux-gpio@vger.kernel.org, linux-fpga@vger.kernel.org,
linux-usb@vger.kernel.org,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-fpga-owner@vger.kernel.org
Subject: Re: [PATCH 0/3] FPGA Manager support for FPP via FT232H FT245-FIFO
Date: Wed, 02 Aug 2017 17:30:36 +0200 [thread overview]
Message-ID: <ff3124e052defa1cc562847b6a65df37@sw-optimization.com> (raw)
In-Reply-To: <CANk1AXRJJ1seMv0eJmgTrcax+Y-vFyw=XfrQH+8Dd3TGG+jZ0g@mail.gmail.com>
Hello Alan,
many thanks for your response.
Well, I am following the whole discussion from the very start and for my
taste it is too superficial - don't know whether this is the right
wording. Please get me right. We need some kind of implementation
specification or a sample way on how to implement stuff. At some point I
honestly lost track, thus I was asking for a summary so in the end the
result is what we want. If it is clear to everyone what shall be done it
should not be kind of a big deal to quickly sum it up which I/we would
highly appreciate.
Many thanks
Eric
Am 02.08.2017 16:16, schrieb Alan Tull:
> On Wed, Aug 2, 2017 at 6:36 AM, Eric Schwarz <eas@sw-optimization.com>
> wrote:
>
>> Dear all,
>>
>> DENX Software Engineering develops and brings this driver to mainline
>> on
>> behalf of us (ARRI*).
>>
>> Since there was a lot of discussion around this patch series I would
>> highly
>> appreciate if someone could sum up what needs to be changed in detail
>> in
>> order to get this driver into the mainline as I am used it from the
>> other
>> "line-by-line" reviews. I understood that the approach is not generic
>> enough
>> - please correct me if I am wrong on that point. We somehow need a
>> commitment that if we change it to another way that the whole
>> discussion
>> does not start from scratch.
>>
>> Many thanks
>> Eric
>
> Hi Eric,
>
> Patchwork collects all email response to patchsets posted on this
> mailing list [1] so that could be helpful for you here.
>
> Alan
>
> [1] https://patchwork.kernel.org/project/linux-fpga/list/?submitter=769
>
> * I am just writing from my private e-mail address since Outlook
> obviously
> renders all my mails as HTML despite what I am configuring.
>
> [1]... http://www.arri.com
>
> Am 06.07.2017 22:49, schrieb Anatolij Gustschin:
>
> This series adds support for fast passive parallel (FPP) Altera
> FPGA configuration using FTDI FT232H chip in FT245-FIFO mode.
> It has been used to configure Arria 10 FPGAs.
>
> Patch 1 adds an FT232H MFD driver with common functions that
> can be used for FT232H USB-GPIO/I2C/SPI master adapter drivers.
> Currently it is used for FT232H GPIO support (in patch 2) and
> for FT245 FIFO transfers in FPP FPGA manager driver in patch 3.
> Driver support for FT232H USB-I2C/SPI master adapters can be
> added later.
>
> Patch 2 adds a simple GPIO driver supporting four FT232H CBUS GPIOs.
>
> Patch 3 adds an FPGA Manager driver for Altera FPP FPGA configuration
> via FT232H FT245-FIFO interface.
>
> Anatolij Gustschin (3):
> mfd: Add support for FTDI FT232H devices
> gpio: Add FT232H CBUS GPIO driver
> fpga manager: Add FT232H driver for Altera FPP
>
> drivers/fpga/Kconfig | 7 +
> drivers/fpga/Makefile | 1 +
> drivers/fpga/ftdi-fifo-fpp.c | 569
> ++++++++++++++++++++++++++++++++++++++++++
> drivers/gpio/Kconfig | 11 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-ftdi-cbus.c | 251 +++++++++++++++++++
> drivers/mfd/Kconfig | 9 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/ftdi-ft232h.c | 470 ++++++++++++++++++++++++++++++++++
> include/linux/mfd/ftdi/ftdi.h | 71 ++++++
> 10 files changed, 1391 insertions(+)
> create mode 100644 drivers/fpga/ftdi-fifo-fpp.c
> create mode 100644 drivers/gpio/gpio-ftdi-cbus.c
> create mode 100644 drivers/mfd/ftdi-ft232h.c
> create mode 100644 include/linux/mfd/ftdi/ftdi.h
next prev parent reply other threads:[~2017-08-02 15:30 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-06 20:49 [PATCH 0/3] FPGA Manager support for FPP via FT232H FT245-FIFO Anatolij Gustschin
2017-07-06 20:49 ` [PATCH 1/3] mfd: Add support for FTDI FT232H devices Anatolij Gustschin
2017-07-07 7:48 ` Bjørn Mork
2017-07-07 9:53 ` Anatolij Gustschin
2017-07-10 12:34 ` Johan Hovold
2017-07-11 6:52 ` Anatolij Gustschin
2017-07-12 8:50 ` Johan Hovold
2017-07-12 9:11 ` Bjørn Mork
2017-07-19 13:29 ` Anatolij Gustschin
2017-07-19 13:39 ` David Laight
2017-07-19 15:03 ` Anatolij Gustschin
2017-07-13 16:32 ` Anatolij Gustschin
2017-07-10 12:52 ` Johan Hovold
2017-07-19 8:59 ` Johan Hovold
2017-07-19 12:59 ` Anatolij Gustschin
2017-07-25 11:52 ` Johan Hovold
2017-07-25 12:14 ` Anatolij Gustschin
2017-07-19 11:58 ` Anatolij Gustschin
2017-07-25 11:49 ` Johan Hovold
2017-07-25 12:34 ` Anatolij Gustschin
2017-07-06 20:49 ` [PATCH 2/3] gpio: Add FT232H CBUS GPIO driver Anatolij Gustschin
2017-08-01 6:49 ` Linus Walleij
2017-08-01 9:24 ` Johan Hovold
2017-08-07 9:24 ` Linus Walleij
2017-07-06 20:49 ` [PATCH 3/3] fpga manager: Add FT232H driver for Altera FPP Anatolij Gustschin
2017-07-07 9:34 ` David Laight
2017-08-02 11:36 ` [PATCH 0/3] FPGA Manager support for FPP via FT232H FT245-FIFO Eric Schwarz
2017-08-02 14:16 ` Alan Tull
2017-08-02 15:30 ` Eric Schwarz [this message]
2017-08-02 16:06 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ff3124e052defa1cc562847b6a65df37@sw-optimization.com \
--to=eas@sw-optimization.com \
--cc=agust@denx.de \
--cc=atull@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-fpga-owner@vger.kernel.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=moritz.fischer@ettus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).