* [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings
@ 2021-07-13 6:30 Drew Fustini
2021-07-15 17:12 ` Rob Herring
2021-07-16 2:17 ` Bin Meng
0 siblings, 2 replies; 12+ messages in thread
From: Drew Fustini @ 2021-07-13 6:30 UTC (permalink / raw)
To: Rob Herring
Cc: Paul Walmsley, Palmer Dabbelt, Michael Zhu, Wei Fu, Jack Zhu,
Leyfoon Tan, Geert Uytterhoeven, Emil Renner Berthing,
devicetree, linux-riscv, linux-kernel, Drew Fustini
Add DT binding documentation for the StarFive JH7100 Soc [1] and the
BeagleV Starlight JH7100 board [2].
[1] https://github.com/starfive-tech/beaglev_doc
[2] https://github.com/beagleboard/beaglev-starlight
Signed-off-by: Drew Fustini <drew@beagleboard.org>
---
v4 changes:
- removed JH7100 SoC revision number after discussion with Geert
v3 changes:
- added revision number for the board and soc after question from Palmer
v2 changes:
- removed "items:" entry that only had "const: starfive,jh7100"
- correct typo in Description:
Results of running checks:
$ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \
DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml
CHKDT Documentation/devicetree/bindings/processed-schema-examples.json
DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts
SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json
DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml
$ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \
DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml
SYNC include/config/auto.conf.cmd
UPD include/config/kernel.release
SCHEMA Documentation/devicetree/bindings/processed-schema.json
DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb
DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml
DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml
CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml
CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml
CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml
The dts file is from vendor repo and is being cleaned up right now in
preperation for submitting to the mailing list:
https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive
.../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml
diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml
new file mode 100644
index 000000000000..5b36243fd674
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/starfive.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/starfive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive SoC-based boards
+
+maintainers:
+ - Michael Zhu <michael.zhu@starfivetech.com>
+ - Drew Fustini <drew@beagleboard.org>
+
+description:
+ StarFive SoC-based boards
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - const: beagle,beaglev-starlight-jh7100-r0
+ - const: starfive,jh7100
+
+additionalProperties: true
+
+...
--
2.27.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-07-13 6:30 [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings Drew Fustini @ 2021-07-15 17:12 ` Rob Herring 2021-07-16 2:17 ` Bin Meng 1 sibling, 0 replies; 12+ messages in thread From: Rob Herring @ 2021-07-15 17:12 UTC (permalink / raw) To: Drew Fustini Cc: Leyfoon Tan, Palmer Dabbelt, Rob Herring, linux-riscv, Emil Renner Berthing, linux-kernel, Jack Zhu, Geert Uytterhoeven, Paul Walmsley, Michael Zhu, devicetree, Wei Fu On Mon, 12 Jul 2021 23:30:18 -0700, Drew Fustini wrote: > Add DT binding documentation for the StarFive JH7100 Soc [1] and the > BeagleV Starlight JH7100 board [2]. > > [1] https://github.com/starfive-tech/beaglev_doc > [2] https://github.com/beagleboard/beaglev-starlight > > Signed-off-by: Drew Fustini <drew@beagleboard.org> > --- > v4 changes: > - removed JH7100 SoC revision number after discussion with Geert > > v3 changes: > - added revision number for the board and soc after question from Palmer > > v2 changes: > - removed "items:" entry that only had "const: starfive,jh7100" > - correct typo in Description: > > Results of running checks: > $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \ > DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > CHKDT Documentation/devicetree/bindings/processed-schema-examples.json > DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts > SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json > DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \ > DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > SYNC include/config/auto.conf.cmd > UPD include/config/kernel.release > SCHEMA Documentation/devicetree/bindings/processed-schema.json > DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb > DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > The dts file is from vendor repo and is being cleaned up right now in > preperation for submitting to the mailing list: > https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive > > .../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml > Reviewed-by: Rob Herring <robh@kernel.org> (I'm expecting the RiscV maintainers to take this.) ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-07-13 6:30 [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings Drew Fustini 2021-07-15 17:12 ` Rob Herring @ 2021-07-16 2:17 ` Bin Meng 2021-08-04 20:33 ` Palmer Dabbelt 1 sibling, 1 reply; 12+ messages in thread From: Bin Meng @ 2021-07-16 2:17 UTC (permalink / raw) To: Drew Fustini Cc: Rob Herring, Paul Walmsley, Palmer Dabbelt, Michael Zhu, Wei Fu, Jack Zhu, Leyfoon Tan, Geert Uytterhoeven, Emil Renner Berthing, devicetree, linux-riscv, linux-kernel On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew@beagleboard.org> wrote: > > Add DT binding documentation for the StarFive JH7100 Soc [1] and the > BeagleV Starlight JH7100 board [2]. > > [1] https://github.com/starfive-tech/beaglev_doc > [2] https://github.com/beagleboard/beaglev-starlight > > Signed-off-by: Drew Fustini <drew@beagleboard.org> > --- > v4 changes: > - removed JH7100 SoC revision number after discussion with Geert > > v3 changes: > - added revision number for the board and soc after question from Palmer > > v2 changes: > - removed "items:" entry that only had "const: starfive,jh7100" > - correct typo in Description: > > Results of running checks: > $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \ > DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > CHKDT Documentation/devicetree/bindings/processed-schema-examples.json > DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts > SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json > DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \ > DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > SYNC include/config/auto.conf.cmd > UPD include/config/kernel.release > SCHEMA Documentation/devicetree/bindings/processed-schema.json > DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb > DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > The dts file is from vendor repo and is being cleaned up right now in > preperation for submitting to the mailing list: > https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive > > .../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-07-16 2:17 ` Bin Meng @ 2021-08-04 20:33 ` Palmer Dabbelt 2021-08-04 20:54 ` Atish Patra 0 siblings, 1 reply; 12+ messages in thread From: Palmer Dabbelt @ 2021-08-04 20:33 UTC (permalink / raw) To: bmeng.cn Cc: drew, robh+dt, Paul Walmsley, michael.zhu, tekkamanninja, jack.zhu, leyfoon.tan, geert, kernel, devicetree, linux-riscv, linux-kernel On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn@gmail.com wrote: > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew@beagleboard.org> wrote: >> >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the >> BeagleV Starlight JH7100 board [2]. >> >> [1] https://github.com/starfive-tech/beaglev_doc >> [2] https://github.com/beagleboard/beaglev-starlight >> >> Signed-off-by: Drew Fustini <drew@beagleboard.org> >> --- >> v4 changes: >> - removed JH7100 SoC revision number after discussion with Geert >> >> v3 changes: >> - added revision number for the board and soc after question from Palmer >> >> v2 changes: >> - removed "items:" entry that only had "const: starfive,jh7100" >> - correct typo in Description: >> >> Results of running checks: >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \ >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml >> CHKDT Documentation/devicetree/bindings/processed-schema-examples.json >> DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts >> SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json >> DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml >> CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \ >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml >> SYNC include/config/auto.conf.cmd >> UPD include/config/kernel.release >> SCHEMA Documentation/devicetree/bindings/processed-schema.json >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb >> DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml >> DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml >> CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml >> CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml >> CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml >> >> The dts file is from vendor repo and is being cleaned up right now in >> preperation for submitting to the mailing list: >> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive >> >> .../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++ >> 1 file changed, 27 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml >> > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Thanks. This is on for-next, as Rob suggested taking it via the RISC-V tree. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-08-04 20:33 ` Palmer Dabbelt @ 2021-08-04 20:54 ` Atish Patra 2021-08-04 21:13 ` Palmer Dabbelt 0 siblings, 1 reply; 12+ messages in thread From: Atish Patra @ 2021-08-04 20:54 UTC (permalink / raw) To: Palmer Dabbelt Cc: Bin Meng, Drew Fustini, Rob Herring, Paul Walmsley, michael.zhu, Wei Fu, jack.zhu, leyfoon.tan, Geert Uytterhoeven, Emil Renner Berhing, devicetree, linux-riscv, linux-kernel@vger.kernel.org List On Wed, Aug 4, 2021 at 1:33 PM Palmer Dabbelt <palmer@dabbelt.com> wrote: > > On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn@gmail.com wrote: > > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew@beagleboard.org> wrote: > >> > >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the > >> BeagleV Starlight JH7100 board [2]. > >> > >> [1] https://github.com/starfive-tech/beaglev_doc > >> [2] https://github.com/beagleboard/beaglev-starlight > >> > >> Signed-off-by: Drew Fustini <drew@beagleboard.org> > >> --- > >> v4 changes: > >> - removed JH7100 SoC revision number after discussion with Geert > >> > >> v3 changes: > >> - added revision number for the board and soc after question from Palmer > >> > >> v2 changes: > >> - removed "items:" entry that only had "const: starfive,jh7100" > >> - correct typo in Description: > >> > >> Results of running checks: > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \ > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > >> CHKDT Documentation/devicetree/bindings/processed-schema-examples.json > >> DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts > >> SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json > >> DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > >> CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \ > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > >> SYNC include/config/auto.conf.cmd > >> UPD include/config/kernel.release > >> SCHEMA Documentation/devicetree/bindings/processed-schema.json > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb > >> DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > >> DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > >> CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > >> CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > >> CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > >> > >> The dts file is from vendor repo and is being cleaned up right now in > >> preperation for submitting to the mailing list: > >> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive > >> > >> .../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++ > >> 1 file changed, 27 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml > >> > > > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> > > Thanks. This is on for-next, as Rob suggested taking it via the RISC-V > tree. > Given that beagleV starlight mass production is cancelled [1], are we still upstreaming the support for this ? [1] https://www.cnx-software.com/2021/07/31/beaglev-starlight-sbc-wont-be-mass-manufactured-redesigned-beaglev-risc-v-sbc-expected-in-q1-2022/ > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv -- Regards, Atish ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-08-04 20:54 ` Atish Patra @ 2021-08-04 21:13 ` Palmer Dabbelt 2021-08-05 2:30 ` Drew Fustini 0 siblings, 1 reply; 12+ messages in thread From: Palmer Dabbelt @ 2021-08-04 21:13 UTC (permalink / raw) To: atishp, drew Cc: bmeng.cn, robh+dt, Paul Walmsley, michael.zhu, tekkamanninja, jack.zhu, leyfoon.tan, geert, kernel, devicetree, linux-riscv, linux-kernel On Wed, 04 Aug 2021 13:54:16 PDT (-0700), atishp@atishpatra.org wrote: > On Wed, Aug 4, 2021 at 1:33 PM Palmer Dabbelt <palmer@dabbelt.com> wrote: >> >> On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn@gmail.com wrote: >> > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew@beagleboard.org> wrote: >> >> >> >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the >> >> BeagleV Starlight JH7100 board [2]. >> >> >> >> [1] https://github.com/starfive-tech/beaglev_doc >> >> [2] https://github.com/beagleboard/beaglev-starlight >> >> >> >> Signed-off-by: Drew Fustini <drew@beagleboard.org> >> >> --- >> >> v4 changes: >> >> - removed JH7100 SoC revision number after discussion with Geert >> >> >> >> v3 changes: >> >> - added revision number for the board and soc after question from Palmer >> >> >> >> v2 changes: >> >> - removed "items:" entry that only had "const: starfive,jh7100" >> >> - correct typo in Description: >> >> >> >> Results of running checks: >> >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \ >> >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml >> >> CHKDT Documentation/devicetree/bindings/processed-schema-examples.json >> >> DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts >> >> SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json >> >> DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml >> >> CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml >> >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \ >> >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml >> >> SYNC include/config/auto.conf.cmd >> >> UPD include/config/kernel.release >> >> SCHEMA Documentation/devicetree/bindings/processed-schema.json >> >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb >> >> DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml >> >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml >> >> DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml >> >> CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml >> >> CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml >> >> CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml >> >> >> >> The dts file is from vendor repo and is being cleaned up right now in >> >> preperation for submitting to the mailing list: >> >> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive >> >> >> >> .../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++ >> >> 1 file changed, 27 insertions(+) >> >> create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml >> >> >> > >> > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> >> >> Thanks. This is on for-next, as Rob suggested taking it via the RISC-V >> tree. >> > Given that beagleV starlight mass production is cancelled [1], are we > still upstreaming the support for this ? I'm not sure, but I wasn't quite sure where to have that discussion. I figured that the boards exist so there's no reason to shoot this down, given that it's just the vendor DT list. At a bare minimum there's out of tree support for this, so having the DT strings defined seems sane as that's a defacto interface with bootloaders. Maybe this is more of a question for Drew: I think we were all OK working through the issues with the first-run chip when there was going to be a lot of them, but with such a small number produced I'm not sure if there's going to be enough interested to take on all that effort. I'm not quite sure where we stand on support for this: at some point there were some ideas floating around as to a way to support it without major software changes (allocating into the non-caching regions). If that pans out then I'm fine handling this, at least from the RISC-V side, but if we're going to have to go through all the ISA/SBI stuff then it's probably not worth it. Also not sure if there are a bunch of starfive-specific drivers that would be needed to make this boot, in which case it's probably best to wait for whatever comes next. > > [1] https://www.cnx-software.com/2021/07/31/beaglev-starlight-sbc-wont-be-mass-manufactured-redesigned-beaglev-risc-v-sbc-expected-in-q1-2022/ >> _______________________________________________ >> linux-riscv mailing list >> linux-riscv@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-08-04 21:13 ` Palmer Dabbelt @ 2021-08-05 2:30 ` Drew Fustini 2021-08-05 8:13 ` Andreas Schwab 2021-08-05 8:13 ` Emil Renner Berthing 0 siblings, 2 replies; 12+ messages in thread From: Drew Fustini @ 2021-08-05 2:30 UTC (permalink / raw) To: Palmer Dabbelt Cc: atishp, drew, bmeng.cn, robh+dt, Paul Walmsley, michael.zhu, tekkamanninja, jack.zhu, leyfoon.tan, geert, kernel, devicetree, linux-riscv, linux-kernel On Wed, Aug 04, 2021 at 02:13:47PM -0700, Palmer Dabbelt wrote: > On Wed, 04 Aug 2021 13:54:16 PDT (-0700), atishp@atishpatra.org wrote: > > On Wed, Aug 4, 2021 at 1:33 PM Palmer Dabbelt <palmer@dabbelt.com> wrote: > > > > > > On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn@gmail.com wrote: > > > > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew@beagleboard.org> wrote: > > > >> > > > >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the > > > >> BeagleV Starlight JH7100 board [2]. > > > >> > > > >> [1] https://github.com/starfive-tech/beaglev_doc > > > >> [2] https://github.com/beagleboard/beaglev-starlight > > > >> > > > >> Signed-off-by: Drew Fustini <drew@beagleboard.org> > > > >> --- > > > >> v4 changes: > > > >> - removed JH7100 SoC revision number after discussion with Geert > > > >> > > > >> v3 changes: > > > >> - added revision number for the board and soc after question from Palmer > > > >> > > > >> v2 changes: > > > >> - removed "items:" entry that only had "const: starfive,jh7100" > > > >> - correct typo in Description: > > > >> > > > >> Results of running checks: > > > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \ > > > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > > > >> CHKDT Documentation/devicetree/bindings/processed-schema-examples.json > > > >> DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts > > > >> SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json > > > >> DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > > > >> CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > > > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \ > > > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > > > >> SYNC include/config/auto.conf.cmd > > > >> UPD include/config/kernel.release > > > >> SCHEMA Documentation/devicetree/bindings/processed-schema.json > > > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb > > > >> DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > > > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > > >> DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > > > >> CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > > > >> CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > > > >> CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > > >> > > > >> The dts file is from vendor repo and is being cleaned up right now in > > > >> preperation for submitting to the mailing list: > > > >> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive > > > >> > > > >> .../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++ > > > >> 1 file changed, 27 insertions(+) > > > >> create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml > > > >> > > > > > > > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> > > > > > > Thanks. This is on for-next, as Rob suggested taking it via the RISC-V > > > tree. > > > > > Given that beagleV starlight mass production is cancelled [1], are we > > still upstreaming the support for this ? > > I'm not sure, but I wasn't quite sure where to have that discussion. I > figured that the boards exist so there's no reason to shoot this down, given > that it's just the vendor DT list. At a bare minimum there's out of tree > support for this, so having the DT strings defined seems sane as that's a > defacto interface with bootloaders. > > Maybe this is more of a question for Drew: I think we were all OK working > through the issues with the first-run chip when there was going to be a lot > of them, but with such a small number produced I'm not sure if there's going > to be enough interested to take on all that effort. > > I'm not quite sure where we stand on support for this: at some point there > were some ideas floating around as to a way to support it without major > software changes (allocating into the non-caching regions). If that pans > out then I'm fine handling this, at least from the RISC-V side, but if we're > going to have to go through all the ISA/SBI stuff then it's probably not > worth it. Also not sure if there are a bunch of starfive-specific drivers > that would be needed to make this boot, in which case it's probably best to > wait for whatever comes next. I think that the discontinued beta prototype could be useful as a native build host for those of you that have it and don't have an Unmatched. The arch_sync_dma RFC from Atish [1] is key to the board running mainline. Most of the peripherals (USB, SD card, ethernet) are already supported by upstream Cadence and Synopsys drivers. However, the vendor kernel used ifdef's to flush the L2 cache at several points in those drivers and subsystem cores because the peripherals are on a non-cache coherent interconnect. Without the proposed solution from Atish that uses the non-cached DDR alias, then only serial console would work on mainline (assuming the system is running from a ramdisk that the vendor uboot loaded). Thanks, Drew [1] https://lore.kernel.org/linux-riscv/CAOnJCU+ip1ccc9CrREi3c+15ue4Grcq+ENbQ+z_gh3CH249aAg@mail.gmail.com/T/#md422e9de172a179f8625c5bb595cf40e5942db67 ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-08-05 2:30 ` Drew Fustini @ 2021-08-05 8:13 ` Andreas Schwab 2021-08-05 8:13 ` Emil Renner Berthing 1 sibling, 0 replies; 12+ messages in thread From: Andreas Schwab @ 2021-08-05 8:13 UTC (permalink / raw) To: Drew Fustini Cc: Palmer Dabbelt, atishp, drew, bmeng.cn, robh+dt, Paul Walmsley, michael.zhu, tekkamanninja, jack.zhu, leyfoon.tan, geert, kernel, devicetree, linux-riscv, linux-kernel On Aug 04 2021, Drew Fustini wrote: > The arch_sync_dma RFC from Atish [1] is key to the board running > mainline. It still has issues, though. https://github.com/starfive-tech/linux/issues/1#issuecomment-879910372 Andreas. -- Andreas Schwab, schwab@linux-m68k.org GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1 "And now for something completely different." ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-08-05 2:30 ` Drew Fustini 2021-08-05 8:13 ` Andreas Schwab @ 2021-08-05 8:13 ` Emil Renner Berthing 2021-08-05 18:09 ` Atish Patra 1 sibling, 1 reply; 12+ messages in thread From: Emil Renner Berthing @ 2021-08-05 8:13 UTC (permalink / raw) To: Drew Fustini Cc: Palmer Dabbelt, Atish Patra, Drew Fustini, Bin Meng, Rob Herring, Paul Walmsley, Michael Zhu, Fu Wei, jack.zhu, leyfoon.tan, Geert Uytterhoeven, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, linux-riscv, Linux Kernel Mailing List On Thu, 5 Aug 2021 at 04:30, Drew Fustini <drew@pdp7.com> wrote: > On Wed, Aug 04, 2021 at 02:13:47PM -0700, Palmer Dabbelt wrote: > > On Wed, 04 Aug 2021 13:54:16 PDT (-0700), atishp@atishpatra.org wrote: > > > On Wed, Aug 4, 2021 at 1:33 PM Palmer Dabbelt <palmer@dabbelt.com> wrote: > > > > > > > > On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn@gmail.com wrote: > > > > > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew@beagleboard.org> wrote: > > > > >> > > > > >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the > > > > >> BeagleV Starlight JH7100 board [2]. > > > > >> > > > > >> [1] https://github.com/starfive-tech/beaglev_doc > > > > >> [2] https://github.com/beagleboard/beaglev-starlight > > > > >> > > > > >> Signed-off-by: Drew Fustini <drew@beagleboard.org> > > > > >> --- > > > > >> v4 changes: > > > > >> - removed JH7100 SoC revision number after discussion with Geert > > > > >> > > > > >> v3 changes: > > > > >> - added revision number for the board and soc after question from Palmer > > > > >> > > > > >> v2 changes: > > > > >> - removed "items:" entry that only had "const: starfive,jh7100" > > > > >> - correct typo in Description: > > > > >> > > > > >> Results of running checks: > > > > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \ > > > > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > > > > >> CHKDT Documentation/devicetree/bindings/processed-schema-examples.json > > > > >> DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts > > > > >> SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json > > > > >> DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > > > > >> CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > > > > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \ > > > > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > > > > >> SYNC include/config/auto.conf.cmd > > > > >> UPD include/config/kernel.release > > > > >> SCHEMA Documentation/devicetree/bindings/processed-schema.json > > > > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb > > > > >> DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > > > > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > > > >> DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > > > > >> CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > > > > >> CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > > > > >> CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > > > >> > > > > >> The dts file is from vendor repo and is being cleaned up right now in > > > > >> preperation for submitting to the mailing list: > > > > >> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive > > > > >> > > > > >> .../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++ > > > > >> 1 file changed, 27 insertions(+) > > > > >> create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml > > > > >> > > > > > > > > > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> > > > > > > > > Thanks. This is on for-next, as Rob suggested taking it via the RISC-V > > > > tree. > > > > > > > Given that beagleV starlight mass production is cancelled [1], are we > > > still upstreaming the support for this ? > > > > I'm not sure, but I wasn't quite sure where to have that discussion. I > > figured that the boards exist so there's no reason to shoot this down, given > > that it's just the vendor DT list. At a bare minimum there's out of tree > > support for this, so having the DT strings defined seems sane as that's a > > defacto interface with bootloaders. > > > > Maybe this is more of a question for Drew: I think we were all OK working > > through the issues with the first-run chip when there was going to be a lot > > of them, but with such a small number produced I'm not sure if there's going > > to be enough interested to take on all that effort. > > > > I'm not quite sure where we stand on support for this: at some point there > > were some ideas floating around as to a way to support it without major > > software changes (allocating into the non-caching regions). If that pans > > out then I'm fine handling this, at least from the RISC-V side, but if we're > > going to have to go through all the ISA/SBI stuff then it's probably not > > worth it. Also not sure if there are a bunch of starfive-specific drivers > > that would be needed to make this boot, in which case it's probably best to > > wait for whatever comes next. > > I think that the discontinued beta prototype could be useful as a native > build host for those of you that have it and don't have an Unmatched. Also according to this statement [1], they're still planning on producing new boards with the JH7100 (same chip as on the BeagleV prototype) at the end of Q3 and the JH7110 further in the future, so I still think it'd make sense to support those. [1]: https://www.design-reuse.com/news/50402/starfive-open-source-single-board-platform-q3-2021.html > The arch_sync_dma RFC from Atish [1] is key to the board running > mainline. Most of the peripherals (USB, SD card, ethernet) are already > supported by upstream Cadence and Synopsys drivers. However, the vendor > kernel used ifdef's to flush the L2 cache at several points in those > drivers and subsystem cores because the peripherals are on a non-cache > coherent interconnect. > > Without the proposed solution from Atish that uses the non-cached DDR > alias, then only serial console would work on mainline (assuming the > system is running from a ramdisk that the vendor uboot loaded). > > Thanks, > Drew > > [1] https://lore.kernel.org/linux-riscv/CAOnJCU+ip1ccc9CrREi3c+15ue4Grcq+ENbQ+z_gh3CH249aAg@mail.gmail.com/T/#md422e9de172a179f8625c5bb595cf40e5942db67 ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-08-05 8:13 ` Emil Renner Berthing @ 2021-08-05 18:09 ` Atish Patra 2021-08-05 18:28 ` Drew Fustini 2021-08-09 10:59 ` Geert Uytterhoeven 0 siblings, 2 replies; 12+ messages in thread From: Atish Patra @ 2021-08-05 18:09 UTC (permalink / raw) To: Emil Renner Berthing Cc: Drew Fustini, Palmer Dabbelt, Drew Fustini, Bin Meng, Rob Herring, Paul Walmsley, Michael Zhu, Fu Wei, jack.zhu, leyfoon.tan, Geert Uytterhoeven, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, linux-riscv, Linux Kernel Mailing List On Thu, Aug 5, 2021 at 1:13 AM Emil Renner Berthing <kernel@esmil.dk> wrote: > > On Thu, 5 Aug 2021 at 04:30, Drew Fustini <drew@pdp7.com> wrote: > > On Wed, Aug 04, 2021 at 02:13:47PM -0700, Palmer Dabbelt wrote: > > > On Wed, 04 Aug 2021 13:54:16 PDT (-0700), atishp@atishpatra.org wrote: > > > > On Wed, Aug 4, 2021 at 1:33 PM Palmer Dabbelt <palmer@dabbelt.com> wrote: > > > > > > > > > > On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn@gmail.com wrote: > > > > > > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew@beagleboard.org> wrote: > > > > > >> > > > > > >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the > > > > > >> BeagleV Starlight JH7100 board [2]. > > > > > >> > > > > > >> [1] https://github.com/starfive-tech/beaglev_doc > > > > > >> [2] https://github.com/beagleboard/beaglev-starlight > > > > > >> > > > > > >> Signed-off-by: Drew Fustini <drew@beagleboard.org> > > > > > >> --- > > > > > >> v4 changes: > > > > > >> - removed JH7100 SoC revision number after discussion with Geert > > > > > >> > > > > > >> v3 changes: > > > > > >> - added revision number for the board and soc after question from Palmer > > > > > >> > > > > > >> v2 changes: > > > > > >> - removed "items:" entry that only had "const: starfive,jh7100" > > > > > >> - correct typo in Description: > > > > > >> > > > > > >> Results of running checks: > > > > > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \ > > > > > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > > > > > >> CHKDT Documentation/devicetree/bindings/processed-schema-examples.json > > > > > >> DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts > > > > > >> SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json > > > > > >> DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > > > > > >> CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > > > > > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \ > > > > > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > > > > > >> SYNC include/config/auto.conf.cmd > > > > > >> UPD include/config/kernel.release > > > > > >> SCHEMA Documentation/devicetree/bindings/processed-schema.json > > > > > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb > > > > > >> DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > > > > > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > > > > >> DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > > > > > >> CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > > > > > >> CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > > > > > >> CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > > > > >> > > > > > >> The dts file is from vendor repo and is being cleaned up right now in > > > > > >> preperation for submitting to the mailing list: > > > > > >> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive > > > > > >> > > > > > >> .../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++ > > > > > >> 1 file changed, 27 insertions(+) > > > > > >> create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml > > > > > >> > > > > > > > > > > > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> > > > > > > > > > > Thanks. This is on for-next, as Rob suggested taking it via the RISC-V > > > > > tree. > > > > > > > > > Given that beagleV starlight mass production is cancelled [1], are we > > > > still upstreaming the support for this ? > > > > > > I'm not sure, but I wasn't quite sure where to have that discussion. I > > > figured that the boards exist so there's no reason to shoot this down, given > > > that it's just the vendor DT list. At a bare minimum there's out of tree > > > support for this, so having the DT strings defined seems sane as that's a > > > defacto interface with bootloaders. > > > > > > Maybe this is more of a question for Drew: I think we were all OK working > > > through the issues with the first-run chip when there was going to be a lot > > > of them, but with such a small number produced I'm not sure if there's going > > > to be enough interested to take on all that effort. > > > > > > I'm not quite sure where we stand on support for this: at some point there > > > were some ideas floating around as to a way to support it without major > > > software changes (allocating into the non-caching regions). If that pans > > > out then I'm fine handling this, at least from the RISC-V side, but if we're > > > going to have to go through all the ISA/SBI stuff then it's probably not > > > worth it. Also not sure if there are a bunch of starfive-specific drivers > > > that would be needed to make this boot, in which case it's probably best to > > > wait for whatever comes next. > > > > I think that the discontinued beta prototype could be useful as a native > > build host for those of you that have it and don't have an Unmatched. > > Also according to this statement [1], they're still planning on > producing new boards with the JH7100 (same chip as on the BeagleV > prototype) at the end of Q3 and the JH7110 further in the future, so I > still think it'd make sense to support those. > > [1]: https://www.design-reuse.com/news/50402/starfive-open-source-single-board-platform-q3-2021.html > > > The arch_sync_dma RFC from Atish [1] is key to the board running > > mainline. Most of the peripherals (USB, SD card, ethernet) are already > > supported by upstream Cadence and Synopsys drivers. However, the vendor > > kernel used ifdef's to flush the L2 cache at several points in those > > drivers and subsystem cores because the peripherals are on a non-cache > > coherent interconnect. > > > > Without the proposed solution from Atish that uses the non-cached DDR > > alias, then only serial console would work on mainline (assuming the > > system is running from a ramdisk that the vendor uboot loaded). > > We need the clock patches as well. If there is an agreed effort to upstream the clock patches and other bare minimum patches, I am happy to revise the DMA patches as well. However, I am not sure all the patches should be beagleV or starfive/starlight given the new announcement from StarFive. Does anybody know if they are going to mass produce the exact same SBC (JH7100) or some variant of it ? Maybe we should defer upstreaming until we see the new board ? We probably don't want two different versions of upstreaming support for the same board! > > Thanks, > > Drew > > > > [1] https://lore.kernel.org/linux-riscv/CAOnJCU+ip1ccc9CrREi3c+15ue4Grcq+ENbQ+z_gh3CH249aAg@mail.gmail.com/T/#md422e9de172a179f8625c5bb595cf40e5942db67 -- Regards, Atish ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-08-05 18:09 ` Atish Patra @ 2021-08-05 18:28 ` Drew Fustini 2021-08-09 10:59 ` Geert Uytterhoeven 1 sibling, 0 replies; 12+ messages in thread From: Drew Fustini @ 2021-08-05 18:28 UTC (permalink / raw) To: Atish Patra Cc: Emil Renner Berthing, Palmer Dabbelt, Drew Fustini, Bin Meng, Rob Herring, Paul Walmsley, Michael Zhu, Fu Wei, jack.zhu, leyfoon.tan, Geert Uytterhoeven, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, linux-riscv, Linux Kernel Mailing List On Thu, Aug 05, 2021 at 11:09:36AM -0700, Atish Patra wrote: > On Thu, Aug 5, 2021 at 1:13 AM Emil Renner Berthing <kernel@esmil.dk> wrote: > > > > On Thu, 5 Aug 2021 at 04:30, Drew Fustini <drew@pdp7.com> wrote: > > > On Wed, Aug 04, 2021 at 02:13:47PM -0700, Palmer Dabbelt wrote: > > > > On Wed, 04 Aug 2021 13:54:16 PDT (-0700), atishp@atishpatra.org wrote: > > > > > On Wed, Aug 4, 2021 at 1:33 PM Palmer Dabbelt <palmer@dabbelt.com> wrote: > > > > > > > > > > > > On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn@gmail.com wrote: > > > > > > > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew@beagleboard.org> wrote: > > > > > > >> > > > > > > >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the > > > > > > >> BeagleV Starlight JH7100 board [2]. > > > > > > >> > > > > > > >> [1] https://github.com/starfive-tech/beaglev_doc > > > > > > >> [2] https://github.com/beagleboard/beaglev-starlight > > > > > > >> > > > > > > >> Signed-off-by: Drew Fustini <drew@beagleboard.org> > > > > > > >> --- > > > > > > >> v4 changes: > > > > > > >> - removed JH7100 SoC revision number after discussion with Geert > > > > > > >> > > > > > > >> v3 changes: > > > > > > >> - added revision number for the board and soc after question from Palmer > > > > > > >> > > > > > > >> v2 changes: > > > > > > >> - removed "items:" entry that only had "const: starfive,jh7100" > > > > > > >> - correct typo in Description: > > > > > > >> > > > > > > >> Results of running checks: > > > > > > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check \ > > > > > > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > > > > > > >> CHKDT Documentation/devicetree/bindings/processed-schema-examples.json > > > > > > >> DTEX Documentation/devicetree/bindings/riscv/starfive.example.dts > > > > > > >> SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json > > > > > > >> DTC Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > > > > > > >> CHECK Documentation/devicetree/bindings/riscv/starfive.example.dt.yaml > > > > > > >> $ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check \ > > > > > > >> DT_SCHEMA_FILES=Documentation/devicetree/bindings/riscv/starfive.yaml > > > > > > >> SYNC include/config/auto.conf.cmd > > > > > > >> UPD include/config/kernel.release > > > > > > >> SCHEMA Documentation/devicetree/bindings/processed-schema.json > > > > > > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dtb > > > > > > >> DTC arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > > > > > > >> DTC arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > > > > > >> DTC arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > > > > > > >> CHECK arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dt.yaml > > > > > > >> CHECK arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml > > > > > > >> CHECK arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dt.yaml > > > > > > >> > > > > > > >> The dts file is from vendor repo and is being cleaned up right now in > > > > > > >> preperation for submitting to the mailing list: > > > > > > >> https://github.com/starfive-tech/linux/tree/beaglev/arch/riscv/boot/dts/starfive > > > > > > >> > > > > > > >> .../devicetree/bindings/riscv/starfive.yaml | 27 +++++++++++++++++++ > > > > > > >> 1 file changed, 27 insertions(+) > > > > > > >> create mode 100644 Documentation/devicetree/bindings/riscv/starfive.yaml > > > > > > >> > > > > > > > > > > > > > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> > > > > > > > > > > > > Thanks. This is on for-next, as Rob suggested taking it via the RISC-V > > > > > > tree. > > > > > > > > > > > Given that beagleV starlight mass production is cancelled [1], are we > > > > > still upstreaming the support for this ? > > > > > > > > I'm not sure, but I wasn't quite sure where to have that discussion. I > > > > figured that the boards exist so there's no reason to shoot this down, given > > > > that it's just the vendor DT list. At a bare minimum there's out of tree > > > > support for this, so having the DT strings defined seems sane as that's a > > > > defacto interface with bootloaders. > > > > > > > > Maybe this is more of a question for Drew: I think we were all OK working > > > > through the issues with the first-run chip when there was going to be a lot > > > > of them, but with such a small number produced I'm not sure if there's going > > > > to be enough interested to take on all that effort. > > > > > > > > I'm not quite sure where we stand on support for this: at some point there > > > > were some ideas floating around as to a way to support it without major > > > > software changes (allocating into the non-caching regions). If that pans > > > > out then I'm fine handling this, at least from the RISC-V side, but if we're > > > > going to have to go through all the ISA/SBI stuff then it's probably not > > > > worth it. Also not sure if there are a bunch of starfive-specific drivers > > > > that would be needed to make this boot, in which case it's probably best to > > > > wait for whatever comes next. > > > > > > I think that the discontinued beta prototype could be useful as a native > > > build host for those of you that have it and don't have an Unmatched. > > > > Also according to this statement [1], they're still planning on > > producing new boards with the JH7100 (same chip as on the BeagleV > > prototype) at the end of Q3 and the JH7110 further in the future, so I > > still think it'd make sense to support those. > > > > [1]: https://www.design-reuse.com/news/50402/starfive-open-source-single-board-platform-q3-2021.html > > > > > > > > The arch_sync_dma RFC from Atish [1] is key to the board running > > > mainline. Most of the peripherals (USB, SD card, ethernet) are already > > > supported by upstream Cadence and Synopsys drivers. However, the vendor > > > kernel used ifdef's to flush the L2 cache at several points in those > > > drivers and subsystem cores because the peripherals are on a non-cache > > > coherent interconnect. > > > > > > Without the proposed solution from Atish that uses the non-cached DDR > > > alias, then only serial console would work on mainline (assuming the > > > system is running from a ramdisk that the vendor uboot loaded). > > > > > We need the clock patches as well. If there is an agreed effort to > upstream the clock patches > and other bare minimum patches, I am happy to revise the DMA patches as well. > > However, I am not sure all the patches should be beagleV or > starfive/starlight given the new announcement > from StarFive. Does anybody know if they are going to mass produce the > exact same SBC (JH7100) or some variant of it ? > > Maybe we should defer upstreaming until we see the new board ? We > probably don't want two different versions of upstreaming support > for the same board! The JH7100 was produced through MPW (multi-project wafer) runs and not as a full mask set for mass production. I don't know what quantity will exist beyond the 300 used on the beaglev starlight beta prototypes. Thanks, Drew ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings 2021-08-05 18:09 ` Atish Patra 2021-08-05 18:28 ` Drew Fustini @ 2021-08-09 10:59 ` Geert Uytterhoeven 1 sibling, 0 replies; 12+ messages in thread From: Geert Uytterhoeven @ 2021-08-09 10:59 UTC (permalink / raw) To: Atish Patra Cc: Emil Renner Berthing, Drew Fustini, Palmer Dabbelt, Drew Fustini, Bin Meng, Rob Herring, Paul Walmsley, Michael Zhu, Fu Wei, Jack Zhu, Leyfoon Tan, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, linux-riscv, Linux Kernel Mailing List On Thu, Aug 5, 2021 at 8:09 PM Atish Patra <atishp@atishpatra.org> wrote: > On Thu, Aug 5, 2021 at 1:13 AM Emil Renner Berthing <kernel@esmil.dk> wrote: > > On Thu, 5 Aug 2021 at 04:30, Drew Fustini <drew@pdp7.com> wrote: > > > On Wed, Aug 04, 2021 at 02:13:47PM -0700, Palmer Dabbelt wrote: > > > > On Wed, 04 Aug 2021 13:54:16 PDT (-0700), atishp@atishpatra.org wrote: > > > > > On Wed, Aug 4, 2021 at 1:33 PM Palmer Dabbelt <palmer@dabbelt.com> wrote: > > > > > > On Thu, 15 Jul 2021 19:17:23 PDT (-0700), bmeng.cn@gmail.com wrote: > > > > > > > On Tue, Jul 13, 2021 at 2:34 PM Drew Fustini <drew@beagleboard.org> wrote: > > > > > > >> Add DT binding documentation for the StarFive JH7100 Soc [1] and the > > > > > > >> BeagleV Starlight JH7100 board [2]. > > > > > > >> > > > > > > >> [1] https://github.com/starfive-tech/beaglev_doc > > > > > > >> [2] https://github.com/beagleboard/beaglev-starlight > > > > > > >> > > > > > > >> Signed-off-by: Drew Fustini <drew@beagleboard.org> > > > > > Given that beagleV starlight mass production is cancelled [1], are we > > > > > still upstreaming the support for this ? > > > > > > > > I'm not sure, but I wasn't quite sure where to have that discussion. I > > > > figured that the boards exist so there's no reason to shoot this down, given > > > > that it's just the vendor DT list. At a bare minimum there's out of tree > > > > support for this, so having the DT strings defined seems sane as that's a > > > > defacto interface with bootloaders. > > > > > > > > Maybe this is more of a question for Drew: I think we were all OK working > > > > through the issues with the first-run chip when there was going to be a lot > > > > of them, but with such a small number produced I'm not sure if there's going > > > > to be enough interested to take on all that effort. > > > > > > > > I'm not quite sure where we stand on support for this: at some point there > > > > were some ideas floating around as to a way to support it without major > > > > software changes (allocating into the non-caching regions). If that pans > > > > out then I'm fine handling this, at least from the RISC-V side, but if we're > > > > going to have to go through all the ISA/SBI stuff then it's probably not > > > > worth it. Also not sure if there are a bunch of starfive-specific drivers > > > > that would be needed to make this boot, in which case it's probably best to > > > > wait for whatever comes next. > > > > > > I think that the discontinued beta prototype could be useful as a native > > > build host for those of you that have it and don't have an Unmatched. Exactly. And there are ca. 300 boards out there (many more than some other platforms supported by Linux), which won't disappear with the blimp of an eye (unlike "proprietary" boards that tend to get mass-destroyed when a project is cancelled). > > Also according to this statement [1], they're still planning on > > producing new boards with the JH7100 (same chip as on the BeagleV > > prototype) at the end of Q3 and the JH7110 further in the future, so I > > still think it'd make sense to support those. > > > > [1]: https://www.design-reuse.com/news/50402/starfive-open-source-single-board-platform-q3-2021.html > > > > The arch_sync_dma RFC from Atish [1] is key to the board running > > > mainline. Most of the peripherals (USB, SD card, ethernet) are already > > > supported by upstream Cadence and Synopsys drivers. However, the vendor > > > kernel used ifdef's to flush the L2 cache at several points in those > > > drivers and subsystem cores because the peripherals are on a non-cache > > > coherent interconnect. > > > > > > Without the proposed solution from Atish that uses the non-cached DDR > > > alias, then only serial console would work on mainline (assuming the > > > system is running from a ramdisk that the vendor uboot loaded). > > We need the clock patches as well. If there is an agreed effort to > upstream the clock patches > and other bare minimum patches, I am happy to revise the DMA patches as well. The main issue with the clock driver is that we do not have complete documentation about the clock tree, so the tree implemented by the driver is a bit ad-hoc. However, I do think we already have a good separation between DT bindings (incl. definitions) and clock driver. Hence we can upstream the DT and clock driver, and fill in the missing and correct the existing parts of the clock driver later, without needing further changes to the DT bindings. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-08-09 11:00 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-07-13 6:30 [PATCH v4] dt-bindings: riscv: add starfive jh7100 bindings Drew Fustini 2021-07-15 17:12 ` Rob Herring 2021-07-16 2:17 ` Bin Meng 2021-08-04 20:33 ` Palmer Dabbelt 2021-08-04 20:54 ` Atish Patra 2021-08-04 21:13 ` Palmer Dabbelt 2021-08-05 2:30 ` Drew Fustini 2021-08-05 8:13 ` Andreas Schwab 2021-08-05 8:13 ` Emil Renner Berthing 2021-08-05 18:09 ` Atish Patra 2021-08-05 18:28 ` Drew Fustini 2021-08-09 10:59 ` Geert Uytterhoeven
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).