* [net-next 00/10] drivers/net organize Ethernet drivers (3rd series)
@ 2011-08-11 23:39 Jeff Kirsher
2011-08-11 23:39 ` [net-next 01/10] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
` (10 more replies)
0 siblings, 11 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann
This is the third of seven 10 patch series to move the Ethernet
drivers into drivers/net/ethernet/
The following are changes since commit e7c379d2a0dcb8c30cb580184a0df11805464703:
rtnetlink: remove initialization of dev->real_num_tx_queues
and are available in the git repository at:
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize master
Jeff Kirsher (10):
pasemic_mac*: Move the PA Semi driver
tehuti: Move the Tehuti driver
stmmac: Move the STMicroelectronics driver
bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers
*sonic/natsemi/ns83829: Move the National Semi-conductor drivers
xscale: Move the Intel XScale IXP drivers
ftgmac100/ftmac100: Move the Faraday drivers
8139*/atp/r8169/sc92031: Move the Realtek drivers
de6*/dl2k/sundance: Move the D-Link drivers
atl*: Move the Atheros drivers
MAINTAINERS | 18 +-
drivers/net/Kconfig | 389 --------------------
drivers/net/Makefile | 33 --
drivers/net/arm/Kconfig | 8 -
drivers/net/arm/Makefile | 1 -
drivers/net/ethernet/8390/Kconfig | 7 +-
drivers/net/ethernet/Kconfig | 12 +-
drivers/net/ethernet/Makefile | 10 +
drivers/net/ethernet/apple/Kconfig | 96 +++++
drivers/net/ethernet/apple/Makefile | 9 +
drivers/net/{ => ethernet/apple}/bmac.c | 0
drivers/net/{ => ethernet/apple}/bmac.h | 0
drivers/net/{ => ethernet/apple}/cs89x0.c | 0
drivers/net/{ => ethernet/apple}/cs89x0.h | 0
drivers/net/{ => ethernet/apple}/mac89x0.c | 0
drivers/net/{ => ethernet/apple}/mace.c | 0
drivers/net/{ => ethernet/apple}/mace.h | 0
drivers/net/{ => ethernet/apple}/macmace.c | 0
drivers/net/ethernet/atheros/Kconfig | 65 ++++
drivers/net/ethernet/atheros/Makefile | 8 +
drivers/net/{ => ethernet/atheros}/atl1c/Makefile | 0
drivers/net/{ => ethernet/atheros}/atl1c/atl1c.h | 0
.../{ => ethernet/atheros}/atl1c/atl1c_ethtool.c | 0
.../net/{ => ethernet/atheros}/atl1c/atl1c_hw.c | 0
.../net/{ => ethernet/atheros}/atl1c/atl1c_hw.h | 0
.../net/{ => ethernet/atheros}/atl1c/atl1c_main.c | 0
drivers/net/{ => ethernet/atheros}/atl1e/Makefile | 0
drivers/net/{ => ethernet/atheros}/atl1e/atl1e.h | 0
.../{ => ethernet/atheros}/atl1e/atl1e_ethtool.c | 0
.../net/{ => ethernet/atheros}/atl1e/atl1e_hw.c | 0
.../net/{ => ethernet/atheros}/atl1e/atl1e_hw.h | 0
.../net/{ => ethernet/atheros}/atl1e/atl1e_main.c | 0
.../net/{ => ethernet/atheros}/atl1e/atl1e_param.c | 0
drivers/net/{ => ethernet/atheros}/atlx/Makefile | 0
drivers/net/{ => ethernet/atheros}/atlx/atl1.c | 0
drivers/net/{ => ethernet/atheros}/atlx/atl1.h | 0
drivers/net/{ => ethernet/atheros}/atlx/atl2.c | 0
drivers/net/{ => ethernet/atheros}/atlx/atl2.h | 0
drivers/net/{ => ethernet/atheros}/atlx/atlx.c | 0
drivers/net/{ => ethernet/atheros}/atlx/atlx.h | 0
drivers/net/ethernet/dlink/Kconfig | 84 +++++
drivers/net/ethernet/dlink/Makefile | 8 +
drivers/net/{ => ethernet/dlink}/de600.c | 0
drivers/net/{ => ethernet/dlink}/de600.h | 0
drivers/net/{ => ethernet/dlink}/de620.c | 0
drivers/net/{ => ethernet/dlink}/de620.h | 0
drivers/net/{ => ethernet/dlink}/dl2k.c | 0
drivers/net/{ => ethernet/dlink}/dl2k.h | 0
drivers/net/{ => ethernet/dlink}/sundance.c | 0
drivers/net/ethernet/faraday/Kconfig | 38 ++
drivers/net/ethernet/faraday/Makefile | 6 +
drivers/net/{ => ethernet/faraday}/ftgmac100.c | 0
drivers/net/{ => ethernet/faraday}/ftgmac100.h | 0
drivers/net/{ => ethernet/faraday}/ftmac100.c | 0
drivers/net/{ => ethernet/faraday}/ftmac100.h | 0
drivers/net/ethernet/natsemi/Kconfig | 82 ++++
drivers/net/ethernet/natsemi/Makefile | 10 +
drivers/net/{ => ethernet/natsemi}/ibmlana.c | 0
drivers/net/{ => ethernet/natsemi}/ibmlana.h | 0
drivers/net/{ => ethernet/natsemi}/jazzsonic.c | 0
drivers/net/{ => ethernet/natsemi}/macsonic.c | 0
drivers/net/{ => ethernet/natsemi}/natsemi.c | 0
drivers/net/{ => ethernet/natsemi}/ns83820.c | 0
drivers/net/{ => ethernet/natsemi}/sonic.c | 0
drivers/net/{ => ethernet/natsemi}/sonic.h | 0
drivers/net/{ => ethernet/natsemi}/xtsonic.c | 0
drivers/net/ethernet/pasemi/Kconfig | 29 ++
drivers/net/ethernet/pasemi/Makefile | 5 +
drivers/net/{ => ethernet/pasemi}/pasemi_mac.c | 0
drivers/net/{ => ethernet/pasemi}/pasemi_mac.h | 0
.../net/{ => ethernet/pasemi}/pasemi_mac_ethtool.c | 0
drivers/net/{ => ethernet/realtek}/8139cp.c | 0
drivers/net/{ => ethernet/realtek}/8139too.c | 0
drivers/net/ethernet/realtek/Kconfig | 126 +++++++
drivers/net/ethernet/realtek/Makefile | 9 +
drivers/net/{ => ethernet/realtek}/atp.c | 0
drivers/net/{ => ethernet/realtek}/atp.h | 0
drivers/net/{ => ethernet/realtek}/r8169.c | 0
drivers/net/{ => ethernet/realtek}/sc92031.c | 0
drivers/net/ethernet/stmicro/Kconfig | 22 ++
drivers/net/ethernet/stmicro/Makefile | 5 +
drivers/net/{ => ethernet/stmicro}/stmmac/Kconfig | 14 +-
drivers/net/{ => ethernet/stmicro}/stmmac/Makefile | 0
drivers/net/{ => ethernet/stmicro}/stmmac/common.h | 0
drivers/net/{ => ethernet/stmicro}/stmmac/descs.h | 0
.../net/{ => ethernet/stmicro}/stmmac/dwmac100.h | 0
.../net/{ => ethernet/stmicro}/stmmac/dwmac1000.h | 0
.../{ => ethernet/stmicro}/stmmac/dwmac1000_core.c | 0
.../{ => ethernet/stmicro}/stmmac/dwmac1000_dma.c | 0
.../{ => ethernet/stmicro}/stmmac/dwmac100_core.c | 0
.../{ => ethernet/stmicro}/stmmac/dwmac100_dma.c | 0
.../net/{ => ethernet/stmicro}/stmmac/dwmac_dma.h | 0
.../net/{ => ethernet/stmicro}/stmmac/dwmac_lib.c | 0
.../net/{ => ethernet/stmicro}/stmmac/enh_desc.c | 0
.../net/{ => ethernet/stmicro}/stmmac/norm_desc.c | 0
drivers/net/{ => ethernet/stmicro}/stmmac/stmmac.h | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_ethtool.c | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_main.c | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_mdio.c | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_timer.c | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_timer.h | 0
drivers/net/ethernet/tehuti/Kconfig | 26 ++
drivers/net/ethernet/tehuti/Makefile | 5 +
drivers/net/{ => ethernet/tehuti}/tehuti.c | 0
drivers/net/{ => ethernet/tehuti}/tehuti.h | 0
drivers/net/ethernet/xscale/Kconfig | 31 ++
drivers/net/ethernet/xscale/Makefile | 6 +
drivers/net/{ => ethernet/xscale}/ixp2000/Kconfig | 2 +-
drivers/net/{ => ethernet/xscale}/ixp2000/Makefile | 0
drivers/net/{ => ethernet/xscale}/ixp2000/caleb.c | 0
drivers/net/{ => ethernet/xscale}/ixp2000/caleb.h | 0
.../net/{ => ethernet/xscale}/ixp2000/enp2611.c | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400-msf.c | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400-msf.h | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400_rx.uc | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400_rx.ucode | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400_tx.uc | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400_tx.ucode | 0
drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.c | 0
drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.h | 0
.../{ => ethernet/xscale}/ixp2000/ixpdev_priv.h | 0
drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.c | 0
drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.h | 0
drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c | 0
124 files changed, 712 insertions(+), 452 deletions(-)
create mode 100644 drivers/net/ethernet/apple/Kconfig
create mode 100644 drivers/net/ethernet/apple/Makefile
rename drivers/net/{ => ethernet/apple}/bmac.c (100%)
rename drivers/net/{ => ethernet/apple}/bmac.h (100%)
rename drivers/net/{ => ethernet/apple}/cs89x0.c (100%)
rename drivers/net/{ => ethernet/apple}/cs89x0.h (100%)
rename drivers/net/{ => ethernet/apple}/mac89x0.c (100%)
rename drivers/net/{ => ethernet/apple}/mace.c (100%)
rename drivers/net/{ => ethernet/apple}/mace.h (100%)
rename drivers/net/{ => ethernet/apple}/macmace.c (100%)
create mode 100644 drivers/net/ethernet/atheros/Kconfig
create mode 100644 drivers/net/ethernet/atheros/Makefile
rename drivers/net/{ => ethernet/atheros}/atl1c/Makefile (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c.h (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_ethtool.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_hw.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_hw.h (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_main.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/Makefile (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e.h (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_ethtool.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_hw.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_hw.h (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_main.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_param.c (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/Makefile (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atl1.c (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atl1.h (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atl2.c (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atl2.h (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atlx.c (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atlx.h (100%)
create mode 100644 drivers/net/ethernet/dlink/Kconfig
create mode 100644 drivers/net/ethernet/dlink/Makefile
rename drivers/net/{ => ethernet/dlink}/de600.c (100%)
rename drivers/net/{ => ethernet/dlink}/de600.h (100%)
rename drivers/net/{ => ethernet/dlink}/de620.c (100%)
rename drivers/net/{ => ethernet/dlink}/de620.h (100%)
rename drivers/net/{ => ethernet/dlink}/dl2k.c (100%)
rename drivers/net/{ => ethernet/dlink}/dl2k.h (100%)
rename drivers/net/{ => ethernet/dlink}/sundance.c (100%)
create mode 100644 drivers/net/ethernet/faraday/Kconfig
create mode 100644 drivers/net/ethernet/faraday/Makefile
rename drivers/net/{ => ethernet/faraday}/ftgmac100.c (100%)
rename drivers/net/{ => ethernet/faraday}/ftgmac100.h (100%)
rename drivers/net/{ => ethernet/faraday}/ftmac100.c (100%)
rename drivers/net/{ => ethernet/faraday}/ftmac100.h (100%)
create mode 100644 drivers/net/ethernet/natsemi/Kconfig
create mode 100644 drivers/net/ethernet/natsemi/Makefile
rename drivers/net/{ => ethernet/natsemi}/ibmlana.c (100%)
rename drivers/net/{ => ethernet/natsemi}/ibmlana.h (100%)
rename drivers/net/{ => ethernet/natsemi}/jazzsonic.c (100%)
rename drivers/net/{ => ethernet/natsemi}/macsonic.c (100%)
rename drivers/net/{ => ethernet/natsemi}/natsemi.c (100%)
rename drivers/net/{ => ethernet/natsemi}/ns83820.c (100%)
rename drivers/net/{ => ethernet/natsemi}/sonic.c (100%)
rename drivers/net/{ => ethernet/natsemi}/sonic.h (100%)
rename drivers/net/{ => ethernet/natsemi}/xtsonic.c (100%)
create mode 100644 drivers/net/ethernet/pasemi/Kconfig
create mode 100644 drivers/net/ethernet/pasemi/Makefile
rename drivers/net/{ => ethernet/pasemi}/pasemi_mac.c (100%)
rename drivers/net/{ => ethernet/pasemi}/pasemi_mac.h (100%)
rename drivers/net/{ => ethernet/pasemi}/pasemi_mac_ethtool.c (100%)
rename drivers/net/{ => ethernet/realtek}/8139cp.c (100%)
rename drivers/net/{ => ethernet/realtek}/8139too.c (100%)
create mode 100644 drivers/net/ethernet/realtek/Kconfig
create mode 100644 drivers/net/ethernet/realtek/Makefile
rename drivers/net/{ => ethernet/realtek}/atp.c (100%)
rename drivers/net/{ => ethernet/realtek}/atp.h (100%)
rename drivers/net/{ => ethernet/realtek}/r8169.c (100%)
rename drivers/net/{ => ethernet/realtek}/sc92031.c (100%)
create mode 100644 drivers/net/ethernet/stmicro/Kconfig
create mode 100644 drivers/net/ethernet/stmicro/Makefile
rename drivers/net/{ => ethernet/stmicro}/stmmac/Kconfig (93%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/Makefile (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/common.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/descs.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000_core.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000_dma.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100_core.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100_dma.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac_dma.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac_lib.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/enh_desc.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/norm_desc.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_ethtool.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_main.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_mdio.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_timer.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_timer.h (100%)
create mode 100644 drivers/net/ethernet/tehuti/Kconfig
create mode 100644 drivers/net/ethernet/tehuti/Makefile
rename drivers/net/{ => ethernet/tehuti}/tehuti.c (100%)
rename drivers/net/{ => ethernet/tehuti}/tehuti.h (100%)
create mode 100644 drivers/net/ethernet/xscale/Kconfig
create mode 100644 drivers/net/ethernet/xscale/Makefile
rename drivers/net/{ => ethernet/xscale}/ixp2000/Kconfig (94%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/Makefile (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/caleb.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/caleb.h (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/enp2611.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400-msf.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400-msf.h (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_rx.uc (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_rx.ucode (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_tx.uc (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_tx.ucode (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.h (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev_priv.h (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.h (100%)
rename drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c (100%)
--
1.7.6
^ permalink raw reply [flat|nested] 13+ messages in thread
* [net-next 01/10] pasemic_mac*: Move the PA Semi driver
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-11 23:39 ` [net-next 02/10] tehuti: Move the Tehuti driver Jeff Kirsher
` (9 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Olof Johansson
Move the PA Semi driver into drivers/net/ethernet/pasemi/ and
make the necessary Kconfig and Makefile changes.
CC: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Olof Johansson <olof@lixom.net>
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 9 ------
drivers/net/Makefile | 2 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/pasemi/Kconfig | 29 ++++++++++++++++++++
drivers/net/ethernet/pasemi/Makefile | 5 +++
drivers/net/{ => ethernet/pasemi}/pasemi_mac.c | 0
drivers/net/{ => ethernet/pasemi}/pasemi_mac.h | 0
.../net/{ => ethernet/pasemi}/pasemi_mac_ethtool.c | 0
10 files changed, 37 insertions(+), 12 deletions(-)
create mode 100644 drivers/net/ethernet/pasemi/Kconfig
create mode 100644 drivers/net/ethernet/pasemi/Makefile
rename drivers/net/{ => ethernet/pasemi}/pasemi_mac.c (100%)
rename drivers/net/{ => ethernet/pasemi}/pasemi_mac.h (100%)
rename drivers/net/{ => ethernet/pasemi}/pasemi_mac_ethtool.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index c54e736..51ac08b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4785,7 +4785,7 @@ PA SEMI ETHERNET DRIVER
M: Olof Johansson <olof@lixom.net>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/pasemi_mac.*
+F: drivers/net/ethernet/pasemi/*
PA SEMI SMBUS DRIVER
M: Olof Johansson <olof@lixom.net>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 08ce280..69333fe 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1457,15 +1457,6 @@ if NETDEV_10000
config MDIO
tristate
-config PASEMI_MAC
- tristate "PA Semi 1/10Gbit MAC"
- depends on PPC_PASEMI && PCI && INET
- select PHYLIB
- select INET_LRO
- help
- This driver supports the on-chip 1/10Gbit Ethernet controller on
- PA Semi's PWRficient line of chips.
-
config TEHUTI
tristate "Tehuti Networks 10G Ethernet"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index cf1d5a2..5dfa4c3 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -147,8 +147,6 @@ obj-$(CONFIG_R8169) += r8169.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
-pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_GRETH) += greth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 18b634e..16c206e 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -25,6 +25,7 @@ source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
+source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 288179b..a52dc26 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
+obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_SFC) += sfc/
diff --git a/drivers/net/ethernet/pasemi/Kconfig b/drivers/net/ethernet/pasemi/Kconfig
new file mode 100644
index 0000000..ccb79b8
--- /dev/null
+++ b/drivers/net/ethernet/pasemi/Kconfig
@@ -0,0 +1,29 @@
+#
+# PA Semi network device configuration
+#
+
+config NET_VENDOR_PASEMI
+ bool "PA Semi devices"
+ depends on PPC_PASEMI && PCI && INET
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about PA Semi cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_PASEMI
+
+config PASEMI_MAC
+ tristate "PA Semi 1/10Gbit MAC"
+ depends on PPC_PASEMI && PCI && INET
+ select PHYLIB
+ select INET_LRO
+ ---help---
+ This driver supports the on-chip 1/10Gbit Ethernet controller on
+ PA Semi's PWRficient line of chips.
+
+endif # NET_VENDOR_PASEMI
diff --git a/drivers/net/ethernet/pasemi/Makefile b/drivers/net/ethernet/pasemi/Makefile
new file mode 100644
index 0000000..05db543
--- /dev/null
+++ b/drivers/net/ethernet/pasemi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the A Semi network device drivers.
+#
+
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o pasemi_mac_ethtool.o
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
similarity index 100%
rename from drivers/net/pasemi_mac.c
rename to drivers/net/ethernet/pasemi/pasemi_mac.c
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/ethernet/pasemi/pasemi_mac.h
similarity index 100%
rename from drivers/net/pasemi_mac.h
rename to drivers/net/ethernet/pasemi/pasemi_mac.h
diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/ethernet/pasemi/pasemi_mac_ethtool.c
similarity index 100%
rename from drivers/net/pasemi_mac_ethtool.c
rename to drivers/net/ethernet/pasemi/pasemi_mac_ethtool.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [net-next 02/10] tehuti: Move the Tehuti driver
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
2011-08-11 23:39 ` [net-next 01/10] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-11 23:39 ` [net-next 03/10] stmmac: Move the STMicroelectronics driver Jeff Kirsher
` (8 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann, Alexander Indenbaum,
Andy Gospodarek
Move the Tehuti driver into drivers/net/ethernet/tehuti/ and
make the necessary Kconfig and Makefile changes.
CC: Alexander Indenbaum <baum@tehutinetworks.net>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 6 ------
drivers/net/Makefile | 1 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/tehuti/Kconfig | 26 ++++++++++++++++++++++++++
drivers/net/ethernet/tehuti/Makefile | 5 +++++
drivers/net/{ => ethernet/tehuti}/tehuti.c | 0
drivers/net/{ => ethernet/tehuti}/tehuti.h | 0
9 files changed, 34 insertions(+), 8 deletions(-)
create mode 100644 drivers/net/ethernet/tehuti/Kconfig
create mode 100644 drivers/net/ethernet/tehuti/Makefile
rename drivers/net/{ => ethernet/tehuti}/tehuti.c (100%)
rename drivers/net/{ => ethernet/tehuti}/tehuti.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 51ac08b..c789b6f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6360,7 +6360,7 @@ M: Alexander Indenbaum <baum@tehutinetworks.net>
M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/tehuti*
+F: drivers/net/ethernet/tehuti/*
Telecom Clock Driver for MCPL0010
M: Mark Gross <mark.gross@intel.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 69333fe..d3d2febe 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1457,12 +1457,6 @@ if NETDEV_10000
config MDIO
tristate
-config TEHUTI
- tristate "Tehuti Networks 10G Ethernet"
- depends on PCI
- help
- Tehuti Networks 10G Ethernet NIC
-
endif # NETDEV_10000
source "drivers/net/tokenring/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 5dfa4c3..8d2d677 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_ATL1E) += atl1e/
obj-$(CONFIG_ATL1C) += atl1c/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
-obj-$(CONFIG_TEHUTI) += tehuti.o
obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_VMXNET3) += vmxnet3/
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 16c206e..8375b8b 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -31,5 +31,6 @@ source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
+source "drivers/net/ethernet/tehuti/Kconfig"
endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index a52dc26..26324a1 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_SFC) += sfc/
obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
+obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
diff --git a/drivers/net/ethernet/tehuti/Kconfig b/drivers/net/ethernet/tehuti/Kconfig
new file mode 100644
index 0000000..914ad4059
--- /dev/null
+++ b/drivers/net/ethernet/tehuti/Kconfig
@@ -0,0 +1,26 @@
+#
+# Tehuti network device configuration
+#
+
+config NET_VENDOR_TEHUTI
+ bool "Tehuti devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Tehuti cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_TEHUTI
+
+config TEHUTI
+ tristate "Tehuti Networks 10G Ethernet"
+ depends on PCI
+ ---help---
+ Tehuti Networks 10G Ethernet NIC
+
+endif # NET_VENDOR_TEHUTI
diff --git a/drivers/net/ethernet/tehuti/Makefile b/drivers/net/ethernet/tehuti/Makefile
new file mode 100644
index 0000000..f995421
--- /dev/null
+++ b/drivers/net/ethernet/tehuti/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Tehuti network device drivers.
+#
+
+obj-$(CONFIG_TEHUTI) += tehuti.o
diff --git a/drivers/net/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
similarity index 100%
rename from drivers/net/tehuti.c
rename to drivers/net/ethernet/tehuti/tehuti.c
diff --git a/drivers/net/tehuti.h b/drivers/net/ethernet/tehuti/tehuti.h
similarity index 100%
rename from drivers/net/tehuti.h
rename to drivers/net/ethernet/tehuti/tehuti.h
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [net-next 03/10] stmmac: Move the STMicroelectronics driver
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
2011-08-11 23:39 ` [net-next 01/10] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
2011-08-11 23:39 ` [net-next 02/10] tehuti: Move the Tehuti driver Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-11 23:39 ` [net-next 04/10] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Jeff Kirsher
` (7 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Giuseppe Cavallaro
Move the STMicroelectronics driver into driver/net/ethernet/stmicro/ and
make the necessary Kconfig and Makefile changes.
CC: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 2 -
drivers/net/Makefile | 1 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/stmicro/Kconfig | 22 ++++++++++++++++++++
drivers/net/ethernet/stmicro/Makefile | 5 ++++
drivers/net/{ => ethernet/stmicro}/stmmac/Kconfig | 14 ++++++------
drivers/net/{ => ethernet/stmicro}/stmmac/Makefile | 0
drivers/net/{ => ethernet/stmicro}/stmmac/common.h | 0
drivers/net/{ => ethernet/stmicro}/stmmac/descs.h | 0
.../net/{ => ethernet/stmicro}/stmmac/dwmac100.h | 0
.../net/{ => ethernet/stmicro}/stmmac/dwmac1000.h | 0
.../{ => ethernet/stmicro}/stmmac/dwmac1000_core.c | 0
.../{ => ethernet/stmicro}/stmmac/dwmac1000_dma.c | 0
.../{ => ethernet/stmicro}/stmmac/dwmac100_core.c | 0
.../{ => ethernet/stmicro}/stmmac/dwmac100_dma.c | 0
.../net/{ => ethernet/stmicro}/stmmac/dwmac_dma.h | 0
.../net/{ => ethernet/stmicro}/stmmac/dwmac_lib.c | 0
.../net/{ => ethernet/stmicro}/stmmac/enh_desc.c | 0
.../net/{ => ethernet/stmicro}/stmmac/norm_desc.c | 0
drivers/net/{ => ethernet/stmicro}/stmmac/stmmac.h | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_ethtool.c | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_main.c | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_mdio.c | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_timer.c | 0
.../{ => ethernet/stmicro}/stmmac/stmmac_timer.h | 0
27 files changed, 37 insertions(+), 11 deletions(-)
create mode 100644 drivers/net/ethernet/stmicro/Kconfig
create mode 100644 drivers/net/ethernet/stmicro/Makefile
rename drivers/net/{ => ethernet/stmicro}/stmmac/Kconfig (93%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/Makefile (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/common.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/descs.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000_core.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000_dma.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100_core.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100_dma.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac_dma.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac_lib.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/enh_desc.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/norm_desc.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac.h (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_ethtool.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_main.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_mdio.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_timer.c (100%)
rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_timer.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index c789b6f..5dffc8e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2029,7 +2029,7 @@ M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
L: netdev@vger.kernel.org
W: http://www.stlinux.com
S: Supported
-F: drivers/net/stmmac/
+F: drivers/net/ethernet/stmicro/stmmac/
CYBERPRO FB DRIVER
M: Russell King <linux@arm.linux.org.uk>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d3d2febe..a7ec50f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1406,8 +1406,6 @@ config S6GMAC
To compile this driver as a module, choose M here. The module
will be called s6gmac.
-source "drivers/net/stmmac/Kconfig"
-
config PCH_GBE
tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 8d2d677..b54e308 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -67,7 +67,6 @@ obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_SH_ETH) += sh_eth.o
-obj-$(CONFIG_STMMAC_ETH) += stmmac/
#
# end link order section
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 8375b8b..c38e902 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -30,6 +30,7 @@ source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
+source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 26324a1..75d7a02 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -21,5 +21,6 @@ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_SFC) += sfc/
obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
+obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
diff --git a/drivers/net/ethernet/stmicro/Kconfig b/drivers/net/ethernet/stmicro/Kconfig
new file mode 100644
index 0000000..e40df64
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/Kconfig
@@ -0,0 +1,22 @@
+#
+# STMicroelectronics device configuration
+#
+
+config NET_VENDOR_STMICRO
+ bool "STMicroelectronics devices"
+ depends on HAS_IOMEM
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about STMicroelectronics cards. If you say Y, you will
+ be asked for your specific card in the following questions.
+
+if NET_VENDOR_STMICRO
+
+source "drivers/net/ethernet/stmicro/stmmac/Kconfig"
+
+endif # NET_VENDOR_STMICRO
diff --git a/drivers/net/ethernet/stmicro/Makefile b/drivers/net/ethernet/stmicro/Makefile
new file mode 100644
index 0000000..9b3bfdd
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the STMicroelectronics device drivers.
+#
+
+obj-$(CONFIG_STMMAC_ETH) += stmmac/
diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
similarity index 93%
rename from drivers/net/stmmac/Kconfig
rename to drivers/net/ethernet/stmicro/stmmac/Kconfig
index 7df7df4..cda61e3 100644
--- a/drivers/net/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -1,10 +1,10 @@
config STMMAC_ETH
tristate "STMicroelectronics 10/100/1000 Ethernet driver"
+ depends on HAS_IOMEM
select MII
select PHYLIB
select CRC32
- depends on NETDEVICES && HAS_IOMEM
- help
+ ---help---
This is the driver for the Ethernet IPs are built around a
Synopsys IP Core and only tested on the STMicroelectronics
platforms.
@@ -14,7 +14,7 @@ if STMMAC_ETH
config STMMAC_DA
bool "STMMAC DMA arbitration scheme"
default n
- help
+ ---help---
Selecting this option, rx has priority over Tx (only for Giga
Ethernet device).
By default, the DMA arbitration scheme is based on Round-robin
@@ -24,7 +24,7 @@ config STMMAC_DUAL_MAC
bool "STMMAC: dual mac support (EXPERIMENTAL)"
default n
depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
- help
+ ---help---
Some ST SoCs (for example the stx7141 and stx7200c2) have two
Ethernet Controllers. This option turns on the second Ethernet
device on this kind of platforms.
@@ -33,7 +33,7 @@ config STMMAC_TIMER
bool "STMMAC Timer optimisation"
default n
depends on RTC_HCTOSYS_DEVICE
- help
+ ---help---
Use an external timer for mitigating the number of network
interrupts. Currently, for SH architectures, it is possible
to use the TMU channel 2 and the SH-RTC device.
@@ -45,12 +45,12 @@ choice
config STMMAC_TMU_TIMER
bool "TMU channel 2"
depends on CPU_SH4
- help
+ ---help---
config STMMAC_RTC_TIMER
bool "Real time clock"
depends on RTC_CLASS
- help
+ ---help---
endchoice
diff --git a/drivers/net/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
similarity index 100%
rename from drivers/net/stmmac/Makefile
rename to drivers/net/ethernet/stmicro/stmmac/Makefile
diff --git a/drivers/net/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
similarity index 100%
rename from drivers/net/stmmac/common.h
rename to drivers/net/ethernet/stmicro/stmmac/common.h
diff --git a/drivers/net/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h
similarity index 100%
rename from drivers/net/stmmac/descs.h
rename to drivers/net/ethernet/stmicro/stmmac/descs.h
diff --git a/drivers/net/stmmac/dwmac100.h b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
similarity index 100%
rename from drivers/net/stmmac/dwmac100.h
rename to drivers/net/ethernet/stmicro/stmmac/dwmac100.h
diff --git a/drivers/net/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
similarity index 100%
rename from drivers/net/stmmac/dwmac1000.h
rename to drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
similarity index 100%
rename from drivers/net/stmmac/dwmac1000_core.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
diff --git a/drivers/net/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
similarity index 100%
rename from drivers/net/stmmac/dwmac1000_dma.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
diff --git a/drivers/net/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
similarity index 100%
rename from drivers/net/stmmac/dwmac100_core.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
diff --git a/drivers/net/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
similarity index 100%
rename from drivers/net/stmmac/dwmac100_dma.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
diff --git a/drivers/net/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
similarity index 100%
rename from drivers/net/stmmac/dwmac_dma.h
rename to drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
diff --git a/drivers/net/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
similarity index 100%
rename from drivers/net/stmmac/dwmac_lib.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
diff --git a/drivers/net/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
similarity index 100%
rename from drivers/net/stmmac/enh_desc.c
rename to drivers/net/ethernet/stmicro/stmmac/enh_desc.c
diff --git a/drivers/net/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
similarity index 100%
rename from drivers/net/stmmac/norm_desc.c
rename to drivers/net/ethernet/stmicro/stmmac/norm_desc.c
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
similarity index 100%
rename from drivers/net/stmmac/stmmac.h
rename to drivers/net/ethernet/stmicro/stmmac/stmmac.h
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
similarity index 100%
rename from drivers/net/stmmac/stmmac_ethtool.c
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
similarity index 100%
rename from drivers/net/stmmac/stmmac_main.c
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
similarity index 100%
rename from drivers/net/stmmac/stmmac_mdio.c
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c
similarity index 100%
rename from drivers/net/stmmac/stmmac_timer.c
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c
diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h
similarity index 100%
rename from drivers/net/stmmac/stmmac_timer.h
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [net-next 04/10] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
` (2 preceding siblings ...)
2011-08-11 23:39 ` [net-next 03/10] stmmac: Move the STMicroelectronics driver Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-11 23:39 ` [net-next 05/10] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Jeff Kirsher
` (6 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann, Paul Mackerras,
Paul Mackerras, Russell Nelson
Move the Apple drivers into driver/net/ethernet/apple/ and make the
necessary Kconfig and Makefile changes.
CC: Paul Mackerras <paulus@samba.org>
CC: Paul Mackerras <paulus@au.ibm.com>
CC: Russell Nelson <nelson@crynwr.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/Kconfig | 75 ----------------------
drivers/net/Makefile | 6 --
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/apple/Kconfig | 96 ++++++++++++++++++++++++++++
drivers/net/ethernet/apple/Makefile | 9 +++
drivers/net/{ => ethernet/apple}/bmac.c | 0
drivers/net/{ => ethernet/apple}/bmac.h | 0
drivers/net/{ => ethernet/apple}/cs89x0.c | 0
drivers/net/{ => ethernet/apple}/cs89x0.h | 0
drivers/net/{ => ethernet/apple}/mac89x0.c | 0
drivers/net/{ => ethernet/apple}/mace.c | 0
drivers/net/{ => ethernet/apple}/mace.h | 0
drivers/net/{ => ethernet/apple}/macmace.c | 0
14 files changed, 107 insertions(+), 81 deletions(-)
create mode 100644 drivers/net/ethernet/apple/Kconfig
create mode 100644 drivers/net/ethernet/apple/Makefile
rename drivers/net/{ => ethernet/apple}/bmac.c (100%)
rename drivers/net/{ => ethernet/apple}/bmac.h (100%)
rename drivers/net/{ => ethernet/apple}/cs89x0.c (100%)
rename drivers/net/{ => ethernet/apple}/cs89x0.h (100%)
rename drivers/net/{ => ethernet/apple}/mac89x0.c (100%)
rename drivers/net/{ => ethernet/apple}/mace.c (100%)
rename drivers/net/{ => ethernet/apple}/mace.h (100%)
rename drivers/net/{ => ethernet/apple}/macmace.c (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a7ec50f..d81f8f9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -237,52 +237,6 @@ config MACB
source "drivers/net/arm/Kconfig"
-config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on PPC_PMAC && PPC32
- select CRC32
- help
- Power Macintoshes and clones with Ethernet built-in on the
- motherboard will usually use a MACE (Medium Access Control for
- Ethernet) interface. Say Y to include support for the MACE chip.
-
- To compile this driver as a module, choose M here: the module
- will be called mace.
-
-config MACE_AAUI_PORT
- bool "Use AAUI port instead of TP by default"
- depends on MACE
- help
- Some Apple machines (notably the Apple Network Server) which use the
- MACE ethernet chip have an Apple AUI port (small 15-pin connector),
- instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
- Y here if you have such a machine. If unsure, say N.
- The driver will default to AAUI on ANS anyway, and if you use it as
- a module, you can provide the port_aaui=0|1 to force the driver.
-
-config BMAC
- tristate "BMAC (G3 ethernet) support"
- depends on PPC_PMAC && PPC32
- select CRC32
- help
- Say Y for support of BMAC Ethernet interfaces. These are used on G3
- computers.
-
- To compile this driver as a module, choose M here: the module
- will be called bmac.
-
-config MAC89x0
- tristate "Macintosh CS89x0 based ethernet cards"
- depends on MAC
- ---help---
- Support for CS89x0 chipset based Ethernet cards. If you have a
- Nubus or LC-PDS network (Ethernet) card of this type, say Y and
- read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. This module will
- be called mac89x0.
-
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
depends on MAC
@@ -296,16 +250,6 @@ config MACSONIC
To compile this driver as a module, choose M here. This module will
be called macsonic.
-config MACMACE
- bool "Macintosh (AV) onboard MACE ethernet"
- depends on MAC
- select CRC32
- help
- Support for the onboard AMD 79C940 MACE Ethernet controller used in
- the 660AV and 840AV Macintosh. If you have one of these Macintoshes
- say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on NET_ETHERNET && MIKROTIK_RB532
@@ -677,25 +621,6 @@ config FORCEDETH
To compile this driver as a module, choose M here. The module
will be called forcedeth.
-config CS89x0
- tristate "CS89x0 support"
- depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
- ---help---
- Support for CS89x0 chipset based Ethernet cards. If you have a
- network (Ethernet) card of this type, say Y and read the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto> as well as
- <file:Documentation/networking/cs89x0.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called cs89x0.
-
-config CS89x0_NONISA_IRQ
- def_bool y
- depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
-
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
depends on NET_PCI && PCI && MIPS
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index b54e308..79f93f0 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -38,9 +38,6 @@ obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_ROADRUNNER) += rrunner.o
-obj-$(CONFIG_MACE) += mace.o
-obj-$(CONFIG_BMAC) += bmac.o
-
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
@@ -133,10 +130,7 @@ obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_CS89x0) += cs89x0.o
obj-$(CONFIG_MACSONIC) += macsonic.o
-obj-$(CONFIG_MACMACE) += macmace.o
-obj-$(CONFIG_MAC89x0) += mac89x0.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index c38e902..c3c415d 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -14,6 +14,7 @@ if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
+source "drivers/net/ethernet/apple/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 75d7a02..b67b88d 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
+obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig
new file mode 100644
index 0000000..fc796bc
--- /dev/null
+++ b/drivers/net/ethernet/apple/Kconfig
@@ -0,0 +1,96 @@
+#
+# Apple device configuration
+#
+
+config NET_VENDOR_APPLE
+ bool "Apple devices"
+ depends on (PPC_PMAC && PPC32) || MAC || ISA || EISA || MACH_IXDP2351 \
+ || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about IBM devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_APPLE
+
+config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on PPC_PMAC && PPC32
+ select CRC32
+ ---help---
+ Power Macintoshes and clones with Ethernet built-in on the
+ motherboard will usually use a MACE (Medium Access Control for
+ Ethernet) interface. Say Y to include support for the MACE chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mace.
+
+config MACE_AAUI_PORT
+ bool "Use AAUI port instead of TP by default"
+ depends on MACE
+ ---help---
+ Some Apple machines (notably the Apple Network Server) which use the
+ MACE ethernet chip have an Apple AUI port (small 15-pin connector),
+ instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
+ Y here if you have such a machine. If unsure, say N.
+ The driver will default to AAUI on ANS anyway, and if you use it as
+ a module, you can provide the port_aaui=0|1 to force the driver.
+
+config BMAC
+ tristate "BMAC (G3 ethernet) support"
+ depends on PPC_PMAC && PPC32
+ select CRC32
+ ---help---
+ Say Y for support of BMAC Ethernet interfaces. These are used on G3
+ computers.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bmac.
+
+config MAC89x0
+ tristate "Macintosh CS89x0 based ethernet cards"
+ depends on MAC
+ ---help---
+ Support for CS89x0 chipset based Ethernet cards. If you have a
+ Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. This module will
+ be called mac89x0.
+
+config MACMACE
+ bool "Macintosh (AV) onboard MACE ethernet"
+ depends on MAC
+ select CRC32
+ ---help---
+ Support for the onboard AMD 79C940 MACE Ethernet controller used in
+ the 660AV and 840AV Macintosh. If you have one of these Macintoshes
+ say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config CS89x0
+ tristate "CS89x0 support"
+ depends on (ISA || EISA || MACH_IXDP2351 \
+ || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
+ ---help---
+ Support for CS89x0 chipset based Ethernet cards. If you have a
+ network (Ethernet) card of this type, say Y and read the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto> as well as
+ <file:Documentation/networking/cs89x0.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called cs89x0.
+
+config CS89x0_NONISA_IRQ
+ def_bool y
+ depends on CS89x0 != n
+ depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+
+endif # NET_VENDOR_APPLE
diff --git a/drivers/net/ethernet/apple/Makefile b/drivers/net/ethernet/apple/Makefile
new file mode 100644
index 0000000..9d30086
--- /dev/null
+++ b/drivers/net/ethernet/apple/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Apple network device drivers.
+#
+
+obj-$(CONFIG_MACE) += mace.o
+obj-$(CONFIG_BMAC) += bmac.o
+obj-$(CONFIG_MAC89x0) += mac89x0.o
+obj-$(CONFIG_CS89x0) += cs89x0.o
+obj-$(CONFIG_MACMACE) += macmace.o
diff --git a/drivers/net/bmac.c b/drivers/net/ethernet/apple/bmac.c
similarity index 100%
rename from drivers/net/bmac.c
rename to drivers/net/ethernet/apple/bmac.c
diff --git a/drivers/net/bmac.h b/drivers/net/ethernet/apple/bmac.h
similarity index 100%
rename from drivers/net/bmac.h
rename to drivers/net/ethernet/apple/bmac.h
diff --git a/drivers/net/cs89x0.c b/drivers/net/ethernet/apple/cs89x0.c
similarity index 100%
rename from drivers/net/cs89x0.c
rename to drivers/net/ethernet/apple/cs89x0.c
diff --git a/drivers/net/cs89x0.h b/drivers/net/ethernet/apple/cs89x0.h
similarity index 100%
rename from drivers/net/cs89x0.h
rename to drivers/net/ethernet/apple/cs89x0.h
diff --git a/drivers/net/mac89x0.c b/drivers/net/ethernet/apple/mac89x0.c
similarity index 100%
rename from drivers/net/mac89x0.c
rename to drivers/net/ethernet/apple/mac89x0.c
diff --git a/drivers/net/mace.c b/drivers/net/ethernet/apple/mace.c
similarity index 100%
rename from drivers/net/mace.c
rename to drivers/net/ethernet/apple/mace.c
diff --git a/drivers/net/mace.h b/drivers/net/ethernet/apple/mace.h
similarity index 100%
rename from drivers/net/mace.h
rename to drivers/net/ethernet/apple/mace.h
diff --git a/drivers/net/macmace.c b/drivers/net/ethernet/apple/macmace.c
similarity index 100%
rename from drivers/net/macmace.c
rename to drivers/net/ethernet/apple/macmace.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [net-next 05/10] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
` (3 preceding siblings ...)
2011-08-11 23:39 ` [net-next 04/10] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-11 23:39 ` [net-next 06/10] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
` (5 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann, Alfred Arnold,
Thomas Bogendoerfer, Harald Welte, Tim Hockin, linux-ns83820,
Kevin Chea, Marc Gauthier, Chris Zankel
Move the National Semi-conductor drivers into drivers/net/ethernet/natsemi/
and make the necessary Kconfig and Makefile changes. Also moved the 8390
(National Semi-conductor) devices as a sub-menu of National Semi-conductor
devices.
- moved the ibmlana driver as well into this directory since it is a
"SONIC" driver
CC: Alfred Arnold <alfred.arnold@lancom.de>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CC: Harald Welte <laforge@gnumonks.org>
CC: Tim Hockin <thockin@hockin.org>
CC: <linux-ns83820@kvack.org>
CC: Kevin Chea <kchea@yahoo.com>
CC: Marc Gauthier <marc@linux-xtensa.org>
CC: Chris Zankel <chris@zankel.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Marc Gauthier <marc@tensilica.com>
---
MAINTAINERS | 4 +-
drivers/net/Kconfig | 62 ------------------
drivers/net/Makefile | 7 --
drivers/net/ethernet/8390/Kconfig | 7 +-
drivers/net/ethernet/Kconfig | 3 +-
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/natsemi/Kconfig | 82 ++++++++++++++++++++++++
drivers/net/ethernet/natsemi/Makefile | 10 +++
drivers/net/{ => ethernet/natsemi}/ibmlana.c | 0
drivers/net/{ => ethernet/natsemi}/ibmlana.h | 0
drivers/net/{ => ethernet/natsemi}/jazzsonic.c | 0
drivers/net/{ => ethernet/natsemi}/macsonic.c | 0
drivers/net/{ => ethernet/natsemi}/natsemi.c | 0
drivers/net/{ => ethernet/natsemi}/ns83820.c | 0
drivers/net/{ => ethernet/natsemi}/sonic.c | 0
drivers/net/{ => ethernet/natsemi}/sonic.h | 0
drivers/net/{ => ethernet/natsemi}/xtsonic.c | 0
17 files changed, 101 insertions(+), 75 deletions(-)
create mode 100644 drivers/net/ethernet/natsemi/Kconfig
create mode 100644 drivers/net/ethernet/natsemi/Makefile
rename drivers/net/{ => ethernet/natsemi}/ibmlana.c (100%)
rename drivers/net/{ => ethernet/natsemi}/ibmlana.h (100%)
rename drivers/net/{ => ethernet/natsemi}/jazzsonic.c (100%)
rename drivers/net/{ => ethernet/natsemi}/macsonic.c (100%)
rename drivers/net/{ => ethernet/natsemi}/natsemi.c (100%)
rename drivers/net/{ => ethernet/natsemi}/ns83820.c (100%)
rename drivers/net/{ => ethernet/natsemi}/sonic.c (100%)
rename drivers/net/{ => ethernet/natsemi}/sonic.h (100%)
rename drivers/net/{ => ethernet/natsemi}/xtsonic.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dffc8e..554529d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4340,7 +4340,7 @@ F: drivers/net/ethernet/myricom/myri10ge/
NATSEMI ETHERNET DRIVER (DP8381x)
M: Tim Hockin <thockin@hockin.org>
S: Maintained
-F: drivers/net/natsemi.c
+F: drivers/net/ethernet/natsemi/natsemi.c
NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
M: Daniel Mack <zonque@gmail.com>
@@ -5943,7 +5943,7 @@ SONIC NETWORK DRIVER
M: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/sonic.*
+F: drivers/net/ethernet/natsemi/sonic.*
SONICS SILICON BACKPLANE DRIVER (SSB)
M: Michael Buesch <m@bues.ch>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d81f8f9..8b1fae8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -237,19 +237,6 @@ config MACB
source "drivers/net/arm/Kconfig"
-config MACSONIC
- tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
- depends on MAC
- ---help---
- Support for NatSemi SONIC based Ethernet devices. This includes
- the onboard Ethernet in many Quadras as well as some LC-PDS,
- a few Nubus and all known Comm Slot Ethernet cards. If you have
- one of these say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. This module will
- be called macsonic.
-
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on NET_ETHERNET && MIKROTIK_RB532
@@ -257,19 +244,6 @@ config KORINA
If you have a Mikrotik RouterBoard 500 or IDT RC32434
based system say Y. Otherwise say N.
-config MIPS_JAZZ_SONIC
- tristate "MIPS JAZZ onboard SONIC Ethernet support"
- depends on MACH_JAZZ
- help
- This is the driver for the onboard card of MIPS Magnum 4000,
- Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
-
-config XTENSA_XT2000_SONIC
- tristate "Xtensa XT2000 onboard SONIC Ethernet support"
- depends on XTENSA_PLATFORM_XT2000
- help
- This is the driver for the onboard card of the Xtensa XT2000 board.
-
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
@@ -556,21 +530,6 @@ config SEEQ8005
To compile this driver as a module, choose M here. The module
will be called seeq8005.
-config IBMLANA
- tristate "IBM LAN Adapter/A support"
- depends on MCA
- ---help---
- This is a Micro Channel Ethernet adapter. You need to set
- CONFIG_MCA to use this driver. It is both available as an in-kernel
- driver and as a module.
-
- To compile this driver as a module, choose M here. The only
- currently supported card is the IBM LAN Adapter/A for Ethernet. It
- will both support 16K and 32K memory windows, however a 32K window
- gives a better security against packet losses. Usage of multiple
- boards with this driver should be possible, but has not been tested
- up to now due to lack of hardware.
-
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
depends on ISA || EISA || PCI
@@ -635,17 +594,6 @@ config FEALNX
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
cards. <http://www.myson.com.tw/>
-config NATSEMI
- tristate "National Semiconductor DP8381x series PCI Ethernet support"
- depends on NET_PCI && PCI
- select CRC32
- help
- This driver is for the National Semiconductor DP83810 series,
- which is used in cards from PureData, NetGear, Linksys
- and others, including the 83815 chip.
- More specific information and updates are available from
- <http://www.scyld.com/network/natsemi.html>.
-
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
@@ -1043,16 +991,6 @@ config IP1000
source "drivers/net/ixp2000/Kconfig"
-config NS83820
- tristate "National Semiconductor DP83820 support"
- depends on PCI
- help
- This is a driver for the National Semiconductor DP83820 series
- of gigabit ethernet MACs. Cards using this chipset include
- the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
- SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
- zero copy.
-
config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 79f93f0..843edb3 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -43,8 +43,6 @@ obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-obj-$(CONFIG_NATSEMI) += natsemi.o
-obj-$(CONFIG_NS83820) += ns83820.o
obj-$(CONFIG_FEALNX) += fealnx.o
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o ethernet/sun/sungem_phy.o
@@ -116,7 +114,6 @@ obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_IBMLANA) += ibmlana.o
obj-$(CONFIG_8139CP) += 8139cp.o
obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_CPMAC) += cpmac.o
@@ -127,10 +124,8 @@ obj-$(CONFIG_SC92031) += sc92031.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
-obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_MACSONIC) += macsonic.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
@@ -144,8 +139,6 @@ obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_GRETH) += greth.o
obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
-
obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_S6GMAC) += s6gmac.o
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index f1b9bdd..5d21698 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -4,9 +4,10 @@
config NET_VENDOR_8390
bool "National Semi-conductor 8390 devices"
- depends on AMIGA_PCMCIA || PCI || SUPERH || ISA || MCA || EISA || \
- MAC || M32R || MACH_TX49XX || MCA_LEGACY || H8300 || \
- ARM || MIPS || ZORRO || PCMCIA || EXPERIMENTAL
+ depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
+ ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \
+ MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \
+ EXPERIMENTAL)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index c3c415d..efc3665 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -12,7 +12,6 @@ menuconfig ETHERNET
if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
-source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
@@ -26,6 +25,8 @@ source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
+source "drivers/net/ethernet/natsemi/Kconfig"
+source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index b67b88d..668ca92 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
+obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig
new file mode 100644
index 0000000..1e5c1e1
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/Kconfig
@@ -0,0 +1,82 @@
+#
+# National Semi-conductor device configuration
+#
+
+config NET_VENDOR_NATSEMI
+ bool "National Semi-conductor devices"
+ depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about National Semi-conductor devices. If you say Y,
+ you will be asked for your specific card in the following questions.
+
+if NET_VENDOR_NATSEMI
+
+config IBMLANA
+ tristate "IBM LAN Adapter/A support"
+ depends on MCA
+ ---help---
+ This is a Micro Channel Ethernet adapter. You need to set
+ CONFIG_MCA to use this driver. It is both available as an in-kernel
+ driver and as a module.
+
+ To compile this driver as a module, choose M here. The only
+ currently supported card is the IBM LAN Adapter/A for Ethernet. It
+ will both support 16K and 32K memory windows, however a 32K window
+ gives a better security against packet losses. Usage of multiple
+ boards with this driver should be possible, but has not been tested
+ up to now due to lack of hardware.
+
+config MACSONIC
+ tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
+ depends on MAC
+ ---help---
+ Support for NatSemi SONIC based Ethernet devices. This includes
+ the onboard Ethernet in many Quadras as well as some LC-PDS,
+ a few Nubus and all known Comm Slot Ethernet cards. If you have
+ one of these say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. This module will
+ be called macsonic.
+
+config MIPS_JAZZ_SONIC
+ tristate "MIPS JAZZ onboard SONIC Ethernet support"
+ depends on MACH_JAZZ
+ ---help---
+ This is the driver for the onboard card of MIPS Magnum 4000,
+ Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
+
+config NATSEMI
+ tristate "National Semiconductor DP8381x series PCI Ethernet support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver is for the National Semiconductor DP83810 series,
+ which is used in cards from PureData, NetGear, Linksys
+ and others, including the 83815 chip.
+ More specific information and updates are available from
+ <http://www.scyld.com/network/natsemi.html>.
+
+config NS83820
+ tristate "National Semiconductor DP83820 support"
+ depends on PCI
+ ---help---
+ This is a driver for the National Semiconductor DP83820 series
+ of gigabit ethernet MACs. Cards using this chipset include
+ the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
+ SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
+ zero copy.
+
+config XTENSA_XT2000_SONIC
+ tristate "Xtensa XT2000 onboard SONIC Ethernet support"
+ depends on XTENSA_PLATFORM_XT2000
+ ---help---
+ This is the driver for the onboard card of the Xtensa XT2000 board.
+
+endif # NET_VENDOR_NATSEMI
diff --git a/drivers/net/ethernet/natsemi/Makefile b/drivers/net/ethernet/natsemi/Makefile
new file mode 100644
index 0000000..9aa5dea
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the National Semi-conductor Sonic devices.
+#
+
+obj-$(CONFIG_IBMLANA) += ibmlana.o
+obj-$(CONFIG_MACSONIC) += macsonic.o
+obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+obj-$(CONFIG_NATSEMI) += natsemi.o
+obj-$(CONFIG_NS83820) += ns83820.o
+obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
diff --git a/drivers/net/ibmlana.c b/drivers/net/ethernet/natsemi/ibmlana.c
similarity index 100%
rename from drivers/net/ibmlana.c
rename to drivers/net/ethernet/natsemi/ibmlana.c
diff --git a/drivers/net/ibmlana.h b/drivers/net/ethernet/natsemi/ibmlana.h
similarity index 100%
rename from drivers/net/ibmlana.h
rename to drivers/net/ethernet/natsemi/ibmlana.h
diff --git a/drivers/net/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
similarity index 100%
rename from drivers/net/jazzsonic.c
rename to drivers/net/ethernet/natsemi/jazzsonic.c
diff --git a/drivers/net/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c
similarity index 100%
rename from drivers/net/macsonic.c
rename to drivers/net/ethernet/natsemi/macsonic.c
diff --git a/drivers/net/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c
similarity index 100%
rename from drivers/net/natsemi.c
rename to drivers/net/ethernet/natsemi/natsemi.c
diff --git a/drivers/net/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
similarity index 100%
rename from drivers/net/ns83820.c
rename to drivers/net/ethernet/natsemi/ns83820.c
diff --git a/drivers/net/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
similarity index 100%
rename from drivers/net/sonic.c
rename to drivers/net/ethernet/natsemi/sonic.c
diff --git a/drivers/net/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
similarity index 100%
rename from drivers/net/sonic.h
rename to drivers/net/ethernet/natsemi/sonic.h
diff --git a/drivers/net/xtsonic.c b/drivers/net/ethernet/natsemi/xtsonic.c
similarity index 100%
rename from drivers/net/xtsonic.c
rename to drivers/net/ethernet/natsemi/xtsonic.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [net-next 06/10] xscale: Move the Intel XScale IXP drivers
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
` (4 preceding siblings ...)
2011-08-11 23:39 ` [net-next 05/10] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-14 20:25 ` Krzysztof Halasa
2011-08-11 23:39 ` [net-next 07/10] ftgmac100/ftmac100: Move the Faraday drivers Jeff Kirsher
` (4 subsequent siblings)
10 siblings, 1 reply; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann, Krzysztof Halasa,
Lennert Buytenhek
Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
and make the necessary Kconfig and Makefile changes.
CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 4 +-
drivers/net/Kconfig | 2 -
drivers/net/Makefile | 1 -
drivers/net/arm/Kconfig | 8 -----
drivers/net/arm/Makefile | 1 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/xscale/Kconfig | 31 ++++++++++++++++++++
drivers/net/ethernet/xscale/Makefile | 6 ++++
drivers/net/{ => ethernet/xscale}/ixp2000/Kconfig | 2 +-
drivers/net/{ => ethernet/xscale}/ixp2000/Makefile | 0
drivers/net/{ => ethernet/xscale}/ixp2000/caleb.c | 0
drivers/net/{ => ethernet/xscale}/ixp2000/caleb.h | 0
.../net/{ => ethernet/xscale}/ixp2000/enp2611.c | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400-msf.c | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400-msf.h | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400_rx.uc | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400_rx.ucode | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400_tx.uc | 0
.../{ => ethernet/xscale}/ixp2000/ixp2400_tx.ucode | 0
drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.c | 0
drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.h | 0
.../{ => ethernet/xscale}/ixp2000/ixpdev_priv.h | 0
drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.c | 0
drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.h | 0
drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c | 0
26 files changed, 42 insertions(+), 15 deletions(-)
create mode 100644 drivers/net/ethernet/xscale/Kconfig
create mode 100644 drivers/net/ethernet/xscale/Makefile
rename drivers/net/{ => ethernet/xscale}/ixp2000/Kconfig (94%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/Makefile (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/caleb.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/caleb.h (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/enp2611.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400-msf.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400-msf.h (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_rx.uc (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_rx.ucode (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_tx.uc (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_tx.ucode (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.h (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev_priv.h (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.c (100%)
rename drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.h (100%)
rename drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 554529d..39607a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3319,7 +3319,7 @@ F: arch/arm/mach-ixp4xx/include/mach/qmgr.h
F: arch/arm/mach-ixp4xx/include/mach/npe.h
F: arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
F: arch/arm/mach-ixp4xx/ixp4xx_npe.c
-F: drivers/net/arm/ixp4xx_eth.c
+F: drivers/net/ethernet/xscale/ixp4xx_eth.c
F: drivers/net/wan/ixp4xx_hss.c
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
@@ -3331,7 +3331,7 @@ INTEL IXP2000 ETHERNET DRIVER
M: Lennert Buytenhek <kernel@wantstofly.org>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/ixp2000/
+F: drivers/net/ethernet/xscale/ixp2000/
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8b1fae8..7f09cd5 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -989,8 +989,6 @@ config IP1000
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
-source "drivers/net/ixp2000/Kconfig"
-
config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 843edb3..ffcb609 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -166,7 +166,6 @@ obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
-obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
obj-$(CONFIG_NETCONSOLE) += netconsole.o
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 7848b5f..4320e88 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -34,14 +34,6 @@ config EP93XX_ETH
This is a driver for the ethernet hardware included in EP93xx CPUs.
Say Y if you are building a kernel for EP93xx based devices.
-config IXP4XX_ETH
- tristate "Intel IXP4xx Ethernet support"
- depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
- select PHYLIB
- help
- Say Y here if you want to use built-in Ethernet ports
- on IXP4xx processor.
-
config W90P910_ETH
tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 6cca728..5a0f141 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -7,5 +7,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
-obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index efc3665..45d3eff 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -23,6 +23,7 @@ source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
+source "drivers/net/ethernet/xscale/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
source "drivers/net/ethernet/natsemi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 668ca92..09536de 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
+obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
new file mode 100644
index 0000000..6bbcc54
--- /dev/null
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -0,0 +1,31 @@
+#
+# Intel XScale IXP device configuration
+#
+
+config NET_VENDOR_XSCALE
+ bool "Intel XScale IXP devices"
+ depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \
+ IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question does not directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about XSacle IXP devices. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+if NET_VENDOR_XSCALE
+
+config IXP4XX_ETH
+ tristate "Intel IXP4xx Ethernet support"
+ depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+ select PHYLIB
+ ---help---
+ Say Y here if you want to use built-in Ethernet ports
+ on IXP4xx processor.
+
+source "drivers/net/ethernet/xscale/ixp2000/Kconfig"
+
+endif # NET_VENDOR_XSCALE
diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile
new file mode 100644
index 0000000..b195b9d
--- /dev/null
+++ b/drivers/net/ethernet/xscale/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Intel XScale IXP device drivers.
+#
+
+obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
diff --git a/drivers/net/ixp2000/Kconfig b/drivers/net/ethernet/xscale/ixp2000/Kconfig
similarity index 94%
rename from drivers/net/ixp2000/Kconfig
rename to drivers/net/ethernet/xscale/ixp2000/Kconfig
index 2fec241..58dbc5b 100644
--- a/drivers/net/ixp2000/Kconfig
+++ b/drivers/net/ethernet/xscale/ixp2000/Kconfig
@@ -1,6 +1,6 @@
config ENP2611_MSF_NET
tristate "Radisys ENP2611 MSF network interface support"
depends on ARCH_ENP2611
- help
+ ---help---
This is a driver for the MSF network interface unit in
the IXP2400 on the Radisys ENP2611 platform.
diff --git a/drivers/net/ixp2000/Makefile b/drivers/net/ethernet/xscale/ixp2000/Makefile
similarity index 100%
rename from drivers/net/ixp2000/Makefile
rename to drivers/net/ethernet/xscale/ixp2000/Makefile
diff --git a/drivers/net/ixp2000/caleb.c b/drivers/net/ethernet/xscale/ixp2000/caleb.c
similarity index 100%
rename from drivers/net/ixp2000/caleb.c
rename to drivers/net/ethernet/xscale/ixp2000/caleb.c
diff --git a/drivers/net/ixp2000/caleb.h b/drivers/net/ethernet/xscale/ixp2000/caleb.h
similarity index 100%
rename from drivers/net/ixp2000/caleb.h
rename to drivers/net/ethernet/xscale/ixp2000/caleb.h
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ethernet/xscale/ixp2000/enp2611.c
similarity index 100%
rename from drivers/net/ixp2000/enp2611.c
rename to drivers/net/ethernet/xscale/ixp2000/enp2611.c
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c
similarity index 100%
rename from drivers/net/ixp2000/ixp2400-msf.c
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c
diff --git a/drivers/net/ixp2000/ixp2400-msf.h b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
similarity index 100%
rename from drivers/net/ixp2000/ixp2400-msf.h
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
diff --git a/drivers/net/ixp2000/ixp2400_rx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc
similarity index 100%
rename from drivers/net/ixp2000/ixp2400_rx.uc
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc
diff --git a/drivers/net/ixp2000/ixp2400_rx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode
similarity index 100%
rename from drivers/net/ixp2000/ixp2400_rx.ucode
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode
diff --git a/drivers/net/ixp2000/ixp2400_tx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
similarity index 100%
rename from drivers/net/ixp2000/ixp2400_tx.uc
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
diff --git a/drivers/net/ixp2000/ixp2400_tx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode
similarity index 100%
rename from drivers/net/ixp2000/ixp2400_tx.ucode
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ethernet/xscale/ixp2000/ixpdev.c
similarity index 100%
rename from drivers/net/ixp2000/ixpdev.c
rename to drivers/net/ethernet/xscale/ixp2000/ixpdev.c
diff --git a/drivers/net/ixp2000/ixpdev.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev.h
similarity index 100%
rename from drivers/net/ixp2000/ixpdev.h
rename to drivers/net/ethernet/xscale/ixp2000/ixpdev.h
diff --git a/drivers/net/ixp2000/ixpdev_priv.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h
similarity index 100%
rename from drivers/net/ixp2000/ixpdev_priv.h
rename to drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ethernet/xscale/ixp2000/pm3386.c
similarity index 100%
rename from drivers/net/ixp2000/pm3386.c
rename to drivers/net/ethernet/xscale/ixp2000/pm3386.c
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ethernet/xscale/ixp2000/pm3386.h
similarity index 100%
rename from drivers/net/ixp2000/pm3386.h
rename to drivers/net/ethernet/xscale/ixp2000/pm3386.h
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
similarity index 100%
rename from drivers/net/arm/ixp4xx_eth.c
rename to drivers/net/ethernet/xscale/ixp4xx_eth.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [net-next 07/10] ftgmac100/ftmac100: Move the Faraday drivers
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
` (5 preceding siblings ...)
2011-08-11 23:39 ` [net-next 06/10] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-11 23:39 ` [net-next 08/10] 8139*/atp/r8169/sc92031: Move the Realtek drivers Jeff Kirsher
` (3 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Po-Yu Chuang
Move the Faraday driver into drivers/net/ethernet/faraday/ and
make the necessary Kconfig and Makefile changes.
CC: "Po-Yu Chuang" <ratbert@faraday-tech.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Po-Yu Chuang <ratbert@faraday-tech.com>
---
drivers/net/Kconfig | 18 -----------
drivers/net/Makefile | 2 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/faraday/Kconfig | 38 ++++++++++++++++++++++++
drivers/net/ethernet/faraday/Makefile | 6 ++++
drivers/net/{ => ethernet/faraday}/ftgmac100.c | 0
drivers/net/{ => ethernet/faraday}/ftgmac100.h | 0
drivers/net/{ => ethernet/faraday}/ftmac100.c | 0
drivers/net/{ => ethernet/faraday}/ftmac100.h | 0
10 files changed, 46 insertions(+), 20 deletions(-)
create mode 100644 drivers/net/ethernet/faraday/Kconfig
create mode 100644 drivers/net/ethernet/faraday/Makefile
rename drivers/net/{ => ethernet/faraday}/ftgmac100.c (100%)
rename drivers/net/{ => ethernet/faraday}/ftgmac100.h (100%)
rename drivers/net/{ => ethernet/faraday}/ftmac100.c (100%)
rename drivers/net/{ => ethernet/faraday}/ftmac100.h (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7f09cd5..8da9f96 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -922,15 +922,6 @@ config XILINX_EMACLITE
help
This driver supports the 10/100 Ethernet Lite from Xilinx.
-config FTMAC100
- tristate "Faraday FTMAC100 10/100 Ethernet support"
- depends on ARM
- select MII
- help
- This driver supports the FTMAC100 10/100 Ethernet controller
- from Faraday. It is used on Faraday A320, Andes AG101 and some
- other ARM/NDS32 SoC's.
-
config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
@@ -1286,15 +1277,6 @@ config PCH_GBE
ML7223 is companion chip for Intel Atom E6xx series.
ML7223 is completely compatible for Intel EG20T PCH.
-config FTGMAC100
- tristate "Faraday FTGMAC100 Gigabit Ethernet support"
- depends on ARM
- select PHYLIB
- help
- This driver supports the FTGMAC100 Gigabit Ethernet controller
- from Faraday. It is used on Faraday A369, Andes AG102 and some
- other ARM/NDS32 SoC's.
-
endif # NETDEV_1000
#
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ffcb609..0b341dc 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -79,8 +79,6 @@ ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
endif
obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_FTGMAC100) += ftgmac100.o
-obj-$(CONFIG_FTMAC100) += ftmac100.o
obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 45d3eff..110071e 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -20,6 +20,7 @@ source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
+source "drivers/net/ethernet/faraday/Kconfig"
source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 09536de..4a6edf7 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
+obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
new file mode 100644
index 0000000..b0d76f0
--- /dev/null
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -0,0 +1,38 @@
+#
+# Faraday device configuration
+#
+
+config NET_VENDOR_FARADAY
+ bool "Faraday devices"
+ depends on ARM
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Faraday cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_FARADAY
+
+config FTMAC100
+ tristate "Faraday FTMAC100 10/100 Ethernet support"
+ depends on ARM
+ select MII
+ ---help---
+ This driver supports the FTMAC100 10/100 Ethernet controller
+ from Faraday. It is used on Faraday A320, Andes AG101 and some
+ other ARM/NDS32 SoC's.
+
+config FTGMAC100
+ tristate "Faraday FTGMAC100 Gigabit Ethernet support"
+ depends on ARM
+ select PHYLIB
+ ---help---
+ This driver supports the FTGMAC100 Gigabit Ethernet controller
+ from Faraday. It is used on Faraday A369, Andes AG102 and some
+ other ARM/NDS32 SoC's.
+
+endif # NET_VENDOR_FARADAY
diff --git a/drivers/net/ethernet/faraday/Makefile b/drivers/net/ethernet/faraday/Makefile
new file mode 100644
index 0000000..408b539
--- /dev/null
+++ b/drivers/net/ethernet/faraday/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Faraday device drivers.
+#
+
+obj-$(CONFIG_FTGMAC100) += ftgmac100.o
+obj-$(CONFIG_FTMAC100) += ftmac100.o
diff --git a/drivers/net/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
similarity index 100%
rename from drivers/net/ftgmac100.c
rename to drivers/net/ethernet/faraday/ftgmac100.c
diff --git a/drivers/net/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
similarity index 100%
rename from drivers/net/ftgmac100.h
rename to drivers/net/ethernet/faraday/ftgmac100.h
diff --git a/drivers/net/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c
similarity index 100%
rename from drivers/net/ftmac100.c
rename to drivers/net/ethernet/faraday/ftmac100.c
diff --git a/drivers/net/ftmac100.h b/drivers/net/ethernet/faraday/ftmac100.h
similarity index 100%
rename from drivers/net/ftmac100.h
rename to drivers/net/ethernet/faraday/ftmac100.h
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [net-next 08/10] 8139*/atp/r8169/sc92031: Move the Realtek drivers
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
` (6 preceding siblings ...)
2011-08-11 23:39 ` [net-next 07/10] ftgmac100/ftmac100: Move the Faraday drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-11 23:39 ` [net-next 09/10] de6*/dl2k/sundance: Move the D-Link drivers Jeff Kirsher
` (2 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann,
Realtek linux nic maintainers, Francois Romieu, Jeff Garzik,
Donald Becker
Move the Realtek drivers into drivers/net/ethernet/realtek/ and make
the necessary Kconfig and Makefile changes.
CC: Realtek linux nic maintainers <nic_swsd@realtek.com>
CC: Francois Romieu <romieu@fr.zoreil.com>
CC: Jeff Garzik <jgarzik@pobox.com>
CC: Donald Becker <becker@scyld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 106 ----------------------
drivers/net/Makefile | 5 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/{ => ethernet/realtek}/8139cp.c | 0
drivers/net/{ => ethernet/realtek}/8139too.c | 0
drivers/net/ethernet/realtek/Kconfig | 126 ++++++++++++++++++++++++++
drivers/net/ethernet/realtek/Makefile | 9 ++
drivers/net/{ => ethernet/realtek}/atp.c | 0
drivers/net/{ => ethernet/realtek}/atp.h | 0
drivers/net/{ => ethernet/realtek}/r8169.c | 0
drivers/net/{ => ethernet/realtek}/sc92031.c | 0
13 files changed, 138 insertions(+), 112 deletions(-)
rename drivers/net/{ => ethernet/realtek}/8139cp.c (100%)
rename drivers/net/{ => ethernet/realtek}/8139too.c (100%)
create mode 100644 drivers/net/ethernet/realtek/Kconfig
create mode 100644 drivers/net/ethernet/realtek/Makefile
rename drivers/net/{ => ethernet/realtek}/atp.c (100%)
rename drivers/net/{ => ethernet/realtek}/atp.h (100%)
rename drivers/net/{ => ethernet/realtek}/r8169.c (100%)
rename drivers/net/{ => ethernet/realtek}/sc92031.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 39607a9..88ff9ef 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -156,7 +156,7 @@ M: Realtek linux nic maintainers <nic_swsd@realtek.com>
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/r8169.c
+F: drivers/net/ethernet/realtek/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
M: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8da9f96..42408d7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -594,73 +594,6 @@ config FEALNX
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
cards. <http://www.myson.com.tw/>
-config 8139CP
- tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
- depends on NET_PCI && PCI && EXPERIMENTAL
- select CRC32
- select MII
- help
- This is a driver for the Fast Ethernet PCI network cards based on
- the RTL8139C+ chips. If you have one of those, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the module
- will be called 8139cp. This is recommended.
-
-config 8139TOO
- tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- ---help---
- This is a driver for the Fast Ethernet PCI network cards based on
- the RTL 8129/8130/8139 chips. If you have one of those, say Y and
- read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the module
- will be called 8139too. This is recommended.
-
-config 8139TOO_PIO
- bool "Use PIO instead of MMIO"
- default y
- depends on 8139TOO
- help
- This instructs the driver to use programmed I/O ports (PIO) instead
- of PCI shared memory (MMIO). This can possibly solve some problems
- in case your mainboard has memory consistency issues. If unsure,
- say N.
-
-config 8139TOO_TUNE_TWISTER
- bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
- depends on 8139TOO
- help
- This implements a function which might come in handy in case you
- are using low quality on long cabling. It is required for RealTek
- RTL-8139 revision K boards, and totally unused otherwise. It tries
- to match the transceiver to the cable characteristics. This is
- experimental since hardly documented by the manufacturer.
- If unsure, say Y.
-
-config 8139TOO_8129
- bool "Support for older RTL-8129/8130 boards"
- depends on 8139TOO
- help
- This enables support for the older and uncommon RTL-8129 and
- RTL-8130 chips, which support MII via an external transceiver,
- instead of an internal one. Disabling this option will save some
- memory by making the code size smaller. If unsure, say Y.
-
-config 8139_OLD_RX_RESET
- bool "Use older RX-reset method"
- depends on 8139TOO
- help
- The 8139too driver was recently updated to contain a more rapid
- reset sequence, in the face of severe receive errors. This "new"
- RX-reset method should be adequate for all boards. But if you
- experience problems, you can enable this option to restore the
- old RX-reset behavior. If unsure, say N.
-
config R6040
tristate "RDC R6040 Fast Ethernet Adapter support"
depends on NET_PCI && PCI
@@ -776,18 +709,6 @@ config VIA_RHINE_MMIO
If unsure, say Y.
-config SC92031
- tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
- depends on NET_PCI && PCI && EXPERIMENTAL
- select CRC32
- ---help---
- This is a driver for the Fast Ethernet PCI network cards based on
- the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
- have one of these, say Y here.
-
- To compile this driver as a module, choose M here: the module
- will be called sc92031. This is recommended.
-
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
depends on NET_ETHERNET && EXPERIMENTAL && AR7
@@ -819,21 +740,6 @@ config NET_POCKET
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config ATP
- tristate "AT-LAN-TEC/RealTek pocket adapter support"
- depends on NET_POCKET && PARPORT && X86
- select CRC32
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>, if you
- want to use this. If you intend to use this driver, you should have
- said N to the "Parallel printer support", because the two drivers
- don't like each other.
-
- To compile this driver as a module, choose M here: the module
- will be called atp.
-
config DE600
tristate "D-Link DE600 pocket adapter support"
depends on NET_POCKET && PARPORT
@@ -1006,18 +912,6 @@ config YELLOWFIN
To compile this driver as a module, choose M here: the module
will be called yellowfin. This is recommended.
-config R8169
- tristate "Realtek 8169 gigabit ethernet support"
- depends on PCI
- select FW_LOADER
- select CRC32
- select MII
- ---help---
- Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
-
- To compile this driver as a module, choose M here: the module
- will be called r8169. This is recommended.
-
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0b341dc..d142fc5 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -112,12 +112,8 @@ obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_8139CP) += 8139cp.o
-obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_EWRK3) += ewrk3.o
-obj-$(CONFIG_ATP) += atp.o
-obj-$(CONFIG_SC92031) += sc92031.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_EQUALIZER) += eql.o
@@ -128,7 +124,6 @@ obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_DL2K) += dl2k.o
-obj-$(CONFIG_R8169) += r8169.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 110071e..fecac79 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -32,6 +32,7 @@ source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
+source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/stmicro/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 4a6edf7..0092c30 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
+obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SFC) += sfc/
obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
diff --git a/drivers/net/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
similarity index 100%
rename from drivers/net/8139cp.c
rename to drivers/net/ethernet/realtek/8139cp.c
diff --git a/drivers/net/8139too.c b/drivers/net/ethernet/realtek/8139too.c
similarity index 100%
rename from drivers/net/8139too.c
rename to drivers/net/ethernet/realtek/8139too.c
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
new file mode 100644
index 0000000..a5f67a09
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -0,0 +1,126 @@
+#
+# Realtek device configuration
+#
+
+config NET_VENDOR_REALTEK
+ bool "Realtek devices"
+ depends on PCI || (PARPORT && X86)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Realtek devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_REALTEK
+
+config ATP
+ tristate "AT-LAN-TEC/RealTek pocket adapter support"
+ depends on PARPORT && X86
+ select CRC32
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>, if you
+ want to use this. If you intend to use this driver, you should have
+ said N to the "Parallel printer support", because the two drivers
+ don't like each other.
+
+ To compile this driver as a module, choose M here: the module
+ will be called atp.
+
+config 8139CP
+ tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ select MII
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the RTL8139C+ chips. If you have one of those, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8139cp. This is recommended.
+
+config 8139TOO
+ tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+ read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8139too. This is recommended.
+
+config 8139TOO_PIO
+ bool "Use PIO instead of MMIO"
+ default y
+ depends on 8139TOO
+ ---help---
+ This instructs the driver to use programmed I/O ports (PIO) instead
+ of PCI shared memory (MMIO). This can possibly solve some problems
+ in case your mainboard has memory consistency issues. If unsure,
+ say N.
+
+config 8139TOO_TUNE_TWISTER
+ bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
+ depends on 8139TOO
+ ---help---
+ This implements a function which might come in handy in case you
+ are using low quality on long cabling. It is required for RealTek
+ RTL-8139 revision K boards, and totally unused otherwise. It tries
+ to match the transceiver to the cable characteristics. This is
+ experimental since hardly documented by the manufacturer.
+ If unsure, say Y.
+
+config 8139TOO_8129
+ bool "Support for older RTL-8129/8130 boards"
+ depends on 8139TOO
+ ---help---
+ This enables support for the older and uncommon RTL-8129 and
+ RTL-8130 chips, which support MII via an external transceiver,
+ instead of an internal one. Disabling this option will save some
+ memory by making the code size smaller. If unsure, say Y.
+
+config 8139_OLD_RX_RESET
+ bool "Use older RX-reset method"
+ depends on 8139TOO
+ ---help---
+ The 8139too driver was recently updated to contain a more rapid
+ reset sequence, in the face of severe receive errors. This "new"
+ RX-reset method should be adequate for all boards. But if you
+ experience problems, you can enable this option to restore the
+ old RX-reset behavior. If unsure, say N.
+
+config R8169
+ tristate "Realtek 8169 gigabit ethernet support"
+ depends on PCI
+ select FW_LOADER
+ select CRC32
+ select MII
+ ---help---
+ Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+
+ To compile this driver as a module, choose M here: the module
+ will be called r8169. This is recommended.
+
+config SC92031
+ tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+ have one of these, say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sc92031. This is recommended.
+
+endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
new file mode 100644
index 0000000..e48cfb6
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Realtek network device drivers.
+#
+
+obj-$(CONFIG_8139CP) += 8139cp.o
+obj-$(CONFIG_8139TOO) += 8139too.o
+obj-$(CONFIG_ATP) += atp.o
+obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/atp.c b/drivers/net/ethernet/realtek/atp.c
similarity index 100%
rename from drivers/net/atp.c
rename to drivers/net/ethernet/realtek/atp.c
diff --git a/drivers/net/atp.h b/drivers/net/ethernet/realtek/atp.h
similarity index 100%
rename from drivers/net/atp.h
rename to drivers/net/ethernet/realtek/atp.h
diff --git a/drivers/net/r8169.c b/drivers/net/ethernet/realtek/r8169.c
similarity index 100%
rename from drivers/net/r8169.c
rename to drivers/net/ethernet/realtek/r8169.c
diff --git a/drivers/net/sc92031.c b/drivers/net/ethernet/realtek/sc92031.c
similarity index 100%
rename from drivers/net/sc92031.c
rename to drivers/net/ethernet/realtek/sc92031.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [net-next 09/10] de6*/dl2k/sundance: Move the D-Link drivers
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
` (7 preceding siblings ...)
2011-08-11 23:39 ` [net-next 08/10] 8139*/atp/r8169/sc92031: Move the Realtek drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-11 23:39 ` [net-next 10/10] atl*: Move the Atheros drivers Jeff Kirsher
2011-08-12 0:54 ` [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) David Miller
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann, Bjorn Ekwall,
Donald Becker, Edward Peng
Move the D-Link drivers into drivers/net/ethernet/dlink/ and
make the necessary Kconfig and Makefile changes.
CC: Bjorn Ekwall <bj0rn@blox.se>
CC: Donald Becker <becker@scyld.com>
CC: Edward Peng <edward_peng@dlink.com.tw>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/Kconfig | 64 --------------------
drivers/net/Makefile | 4 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/dlink/Kconfig | 84 +++++++++++++++++++++++++++
drivers/net/ethernet/dlink/Makefile | 8 +++
drivers/net/{ => ethernet/dlink}/de600.c | 0
drivers/net/{ => ethernet/dlink}/de600.h | 0
drivers/net/{ => ethernet/dlink}/de620.c | 0
drivers/net/{ => ethernet/dlink}/de620.h | 0
drivers/net/{ => ethernet/dlink}/dl2k.c | 0
drivers/net/{ => ethernet/dlink}/dl2k.h | 0
drivers/net/{ => ethernet/dlink}/sundance.c | 0
13 files changed, 94 insertions(+), 68 deletions(-)
create mode 100644 drivers/net/ethernet/dlink/Kconfig
create mode 100644 drivers/net/ethernet/dlink/Makefile
rename drivers/net/{ => ethernet/dlink}/de600.c (100%)
rename drivers/net/{ => ethernet/dlink}/de600.h (100%)
rename drivers/net/{ => ethernet/dlink}/de620.c (100%)
rename drivers/net/{ => ethernet/dlink}/de620.h (100%)
rename drivers/net/{ => ethernet/dlink}/dl2k.c (100%)
rename drivers/net/{ => ethernet/dlink}/dl2k.h (100%)
rename drivers/net/{ => ethernet/dlink}/sundance.c (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 42408d7..8799caf 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -623,26 +623,6 @@ config SIS900
To compile this driver as a module, choose M here: the module
will be called sis900. This is recommended.
-config SUNDANCE
- tristate "Sundance Alta support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- This driver is for the Sundance "Alta" chip.
- More specific information and updates are available from
- <http://www.scyld.com/network/sundance.html>.
-
-config SUNDANCE_MMIO
- bool "Use MMIO instead of PIO"
- depends on SUNDANCE
- help
- Enable memory-mapped I/O for interaction with Sundance NIC registers.
- Do NOT enable this by default, PIO (enabled when MMIO is disabled)
- is known to solve bugs on certain chips.
-
- If unsure, say N.
-
config TLAN
tristate "TI ThunderLAN support"
depends on NET_PCI && (PCI || EISA)
@@ -740,36 +720,6 @@ config NET_POCKET
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config DE600
- tristate "D-Link DE600 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de600.
-
-config DE620
- tristate "D-Link DE620 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de620.
-
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
depends on SGI_HAS_SEEQ
@@ -862,20 +812,6 @@ menuconfig NETDEV_1000
if NETDEV_1000
-config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
- depends on PCI
- select CRC32
- help
- This driver supports DL2000/TC902x-based Gigabit ethernet cards,
- which includes
- D-Link DGE-550T Gigabit Ethernet Adapter.
- D-Link DL2000-based Gigabit Ethernet Adapter.
- Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
-
- To compile this driver as a module, choose M here: the
- module will be called dl2k.
-
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d142fc5..ecd8c9f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -67,7 +67,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
# end link order section
#
-obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
@@ -106,8 +105,6 @@ obj-$(CONFIG_DUMMY) += dummy.o
obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
@@ -123,7 +120,6 @@ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index fecac79..8007e20 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -18,6 +18,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/dlink/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/faraday/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 0092c30..22ef380 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
new file mode 100644
index 0000000..9fdb66b
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -0,0 +1,84 @@
+#
+# D-Link device configuration
+#
+
+config NET_VENDOR_DLINK
+ bool "D-Link devices"
+ depends on PCI || PARPORT
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about D-Link devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_DLINK
+
+config DE600
+ tristate "D-Link DE600 pocket adapter support"
+ depends on PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de600.
+
+config DE620
+ tristate "D-Link DE620 pocket adapter support"
+ depends on PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de620.
+
+config DL2K
+ tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+ which includes
+ D-Link DGE-550T Gigabit Ethernet Adapter.
+ D-Link DL2000-based Gigabit Ethernet Adapter.
+ Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dl2k.
+
+config SUNDANCE
+ tristate "Sundance Alta support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver is for the Sundance "Alta" chip.
+ More specific information and updates are available from
+ <http://www.scyld.com/network/sundance.html>.
+
+config SUNDANCE_MMIO
+ bool "Use MMIO instead of PIO"
+ depends on SUNDANCE
+ ---help---
+ Enable memory-mapped I/O for interaction with Sundance NIC registers.
+ Do NOT enable this by default, PIO (enabled when MMIO is disabled)
+ is known to solve bugs on certain chips.
+
+ If unsure, say N.
+
+endif # NET_VENDOR_DLINK
diff --git a/drivers/net/ethernet/dlink/Makefile b/drivers/net/ethernet/dlink/Makefile
new file mode 100644
index 0000000..c705eaa
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the D-Link network device drivers.
+#
+
+obj-$(CONFIG_DE600) += de600.o
+obj-$(CONFIG_DE620) += de620.o
+obj-$(CONFIG_DL2K) += dl2k.o
+obj-$(CONFIG_SUNDANCE) += sundance.o
diff --git a/drivers/net/de600.c b/drivers/net/ethernet/dlink/de600.c
similarity index 100%
rename from drivers/net/de600.c
rename to drivers/net/ethernet/dlink/de600.c
diff --git a/drivers/net/de600.h b/drivers/net/ethernet/dlink/de600.h
similarity index 100%
rename from drivers/net/de600.h
rename to drivers/net/ethernet/dlink/de600.h
diff --git a/drivers/net/de620.c b/drivers/net/ethernet/dlink/de620.c
similarity index 100%
rename from drivers/net/de620.c
rename to drivers/net/ethernet/dlink/de620.c
diff --git a/drivers/net/de620.h b/drivers/net/ethernet/dlink/de620.h
similarity index 100%
rename from drivers/net/de620.h
rename to drivers/net/ethernet/dlink/de620.h
diff --git a/drivers/net/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
similarity index 100%
rename from drivers/net/dl2k.c
rename to drivers/net/ethernet/dlink/dl2k.c
diff --git a/drivers/net/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
similarity index 100%
rename from drivers/net/dl2k.h
rename to drivers/net/ethernet/dlink/dl2k.h
diff --git a/drivers/net/sundance.c b/drivers/net/ethernet/dlink/sundance.c
similarity index 100%
rename from drivers/net/sundance.c
rename to drivers/net/ethernet/dlink/sundance.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [net-next 10/10] atl*: Move the Atheros drivers
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
` (8 preceding siblings ...)
2011-08-11 23:39 ` [net-next 09/10] de6*/dl2k/sundance: Move the D-Link drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
2011-08-12 0:54 ` [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) David Miller
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann, Jay Cliburn, Chris Snook,
Jie Yang
Move the Atheros drivers into drivers/net/ethernet/atheros/ and
make the necessary Kconfig and Makefile changes.
CC: Jay Cliburn <jcliburn@gmail.com>
CC: Chris Snook <chris.snook@gmail.com>
CC: Jie Yang <jie.yang@atheros.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 45 --------------
drivers/net/Makefile | 4 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/atheros/Kconfig | 65 ++++++++++++++++++++
drivers/net/ethernet/atheros/Makefile | 8 +++
drivers/net/{ => ethernet/atheros}/atl1c/Makefile | 0
drivers/net/{ => ethernet/atheros}/atl1c/atl1c.h | 0
.../{ => ethernet/atheros}/atl1c/atl1c_ethtool.c | 0
.../net/{ => ethernet/atheros}/atl1c/atl1c_hw.c | 0
.../net/{ => ethernet/atheros}/atl1c/atl1c_hw.h | 0
.../net/{ => ethernet/atheros}/atl1c/atl1c_main.c | 0
drivers/net/{ => ethernet/atheros}/atl1e/Makefile | 0
drivers/net/{ => ethernet/atheros}/atl1e/atl1e.h | 0
.../{ => ethernet/atheros}/atl1e/atl1e_ethtool.c | 0
.../net/{ => ethernet/atheros}/atl1e/atl1e_hw.c | 0
.../net/{ => ethernet/atheros}/atl1e/atl1e_hw.h | 0
.../net/{ => ethernet/atheros}/atl1e/atl1e_main.c | 0
.../net/{ => ethernet/atheros}/atl1e/atl1e_param.c | 0
drivers/net/{ => ethernet/atheros}/atlx/Makefile | 0
drivers/net/{ => ethernet/atheros}/atlx/atl1.c | 0
drivers/net/{ => ethernet/atheros}/atlx/atl1.h | 0
drivers/net/{ => ethernet/atheros}/atlx/atl2.c | 0
drivers/net/{ => ethernet/atheros}/atlx/atl2.h | 0
drivers/net/{ => ethernet/atheros}/atlx/atlx.c | 0
drivers/net/{ => ethernet/atheros}/atlx/atlx.h | 0
27 files changed, 76 insertions(+), 50 deletions(-)
create mode 100644 drivers/net/ethernet/atheros/Kconfig
create mode 100644 drivers/net/ethernet/atheros/Makefile
rename drivers/net/{ => ethernet/atheros}/atl1c/Makefile (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c.h (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_ethtool.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_hw.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_hw.h (100%)
rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_main.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/Makefile (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e.h (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_ethtool.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_hw.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_hw.h (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_main.c (100%)
rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_param.c (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/Makefile (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atl1.c (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atl1.h (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atl2.c (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atl2.h (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atlx.c (100%)
rename drivers/net/{ => ethernet/atheros}/atlx/atlx.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 88ff9ef..26fa497 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1282,7 +1282,7 @@ L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
S: Maintained
-F: drivers/net/atlx/
+F: drivers/net/ethernet/atheros/
ATM
M: Chas Williams <chas@cmf.nrl.navy.mil>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8799caf..e6be7123 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -760,17 +760,6 @@ config FEC_MPC52xx_MDIO
If not sure, enable.
If compiled as module, it will be called fec_mpc52xx_phy.
-config ATL2
- tristate "Atheros L2 Fast Ethernet support"
- depends on PCI
- select CRC32
- select MII
- help
- This driver supports the Atheros L2 fast ethernet adapter.
-
- To compile this driver as a module, choose M here. The module
- will be called atl2.
-
config XILINX_EMACLITE
tristate "Xilinx 10/100 Ethernet Lite support"
depends on PPC32 || MICROBLAZE
@@ -1031,40 +1020,6 @@ config XILINX_LL_TEMAC
This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
core used in Xilinx Spartan and Virtex FPGAs
-config ATL1
- tristate "Atheros/Attansic L1 Gigabit Ethernet support"
- depends on PCI
- select CRC32
- select MII
- help
- This driver supports the Atheros/Attansic L1 gigabit ethernet
- adapter.
-
- To compile this driver as a module, choose M here. The module
- will be called atl1.
-
-config ATL1E
- tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
- select CRC32
- select MII
- help
- This driver supports the Atheros L1E gigabit ethernet adapter.
-
- To compile this driver as a module, choose M here. The module
- will be called atl1e.
-
-config ATL1C
- tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
- select CRC32
- select MII
- help
- This driver supports the Atheros L1C gigabit ethernet adapter.
-
- To compile this driver as a module, choose M here. The module
- will be called atl1c.
-
config JME
tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ecd8c9f..d151075 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,10 +13,6 @@ obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_ATL1) += atlx/
-obj-$(CONFIG_ATL2) += atlx/
-obj-$(CONFIG_ATL1E) += atl1e/
-obj-$(CONFIG_ATL1C) += atl1c/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
obj-$(CONFIG_JME) += jme.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 8007e20..9410f20 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -14,6 +14,7 @@ if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
+source "drivers/net/ethernet/atheros/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 22ef380..5d89fd9 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
+obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig
new file mode 100644
index 0000000..966c6c7
--- /dev/null
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -0,0 +1,65 @@
+#
+# Atheros device configuration
+#
+
+config NET_VENDOR_ATHEROS
+ bool "Atheros devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Atheros devices. If you say Y, you will be asked
+ for your specific card in the following questions.
+
+if NET_VENDOR_ATHEROS
+
+config ATL2
+ tristate "Atheros L2 Fast Ethernet support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver supports the Atheros L2 fast ethernet adapter.
+
+ To compile this driver as a module, choose M here. The module
+ will be called atl2.
+
+config ATL1
+ tristate "Atheros/Attansic L1 Gigabit Ethernet support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver supports the Atheros/Attansic L1 gigabit ethernet
+ adapter.
+
+ To compile this driver as a module, choose M here. The module
+ will be called atl1.
+
+config ATL1E
+ tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ select MII
+ ---help---
+ This driver supports the Atheros L1E gigabit ethernet adapter.
+
+ To compile this driver as a module, choose M here. The module
+ will be called atl1e.
+
+config ATL1C
+ tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ select MII
+ ---help---
+ This driver supports the Atheros L1C gigabit ethernet adapter.
+
+ To compile this driver as a module, choose M here. The module
+ will be called atl1c.
+
+endif # NET_VENDOR_ATHEROS
diff --git a/drivers/net/ethernet/atheros/Makefile b/drivers/net/ethernet/atheros/Makefile
new file mode 100644
index 0000000..e7e76fb
--- /dev/null
+++ b/drivers/net/ethernet/atheros/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Atheros network device drivers.
+#
+
+obj-$(CONFIG_ATL1) += atlx/
+obj-$(CONFIG_ATL2) += atlx/
+obj-$(CONFIG_ATL1E) += atl1e/
+obj-$(CONFIG_ATL1C) += atl1c/
diff --git a/drivers/net/atl1c/Makefile b/drivers/net/ethernet/atheros/atl1c/Makefile
similarity index 100%
rename from drivers/net/atl1c/Makefile
rename to drivers/net/ethernet/atheros/atl1c/Makefile
diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/ethernet/atheros/atl1c/atl1c.h
similarity index 100%
rename from drivers/net/atl1c/atl1c.h
rename to drivers/net/ethernet/atheros/atl1c/atl1c.h
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c
similarity index 100%
rename from drivers/net/atl1c/atl1c_ethtool.c
rename to drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c
diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
similarity index 100%
rename from drivers/net/atl1c/atl1c_hw.c
rename to drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
similarity index 100%
rename from drivers/net/atl1c/atl1c_hw.h
rename to drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
similarity index 100%
rename from drivers/net/atl1c/atl1c_main.c
rename to drivers/net/ethernet/atheros/atl1c/atl1c_main.c
diff --git a/drivers/net/atl1e/Makefile b/drivers/net/ethernet/atheros/atl1e/Makefile
similarity index 100%
rename from drivers/net/atl1e/Makefile
rename to drivers/net/ethernet/atheros/atl1e/Makefile
diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h
similarity index 100%
rename from drivers/net/atl1e/atl1e.h
rename to drivers/net/ethernet/atheros/atl1e/atl1e.h
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c
similarity index 100%
rename from drivers/net/atl1e/atl1e_ethtool.c
rename to drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c
diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
similarity index 100%
rename from drivers/net/atl1e/atl1e_hw.c
rename to drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
diff --git a/drivers/net/atl1e/atl1e_hw.h b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.h
similarity index 100%
rename from drivers/net/atl1e/atl1e_hw.h
rename to drivers/net/ethernet/atheros/atl1e/atl1e_hw.h
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
similarity index 100%
rename from drivers/net/atl1e/atl1e_main.c
rename to drivers/net/ethernet/atheros/atl1e/atl1e_main.c
diff --git a/drivers/net/atl1e/atl1e_param.c b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c
similarity index 100%
rename from drivers/net/atl1e/atl1e_param.c
rename to drivers/net/ethernet/atheros/atl1e/atl1e_param.c
diff --git a/drivers/net/atlx/Makefile b/drivers/net/ethernet/atheros/atlx/Makefile
similarity index 100%
rename from drivers/net/atlx/Makefile
rename to drivers/net/ethernet/atheros/atlx/Makefile
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
similarity index 100%
rename from drivers/net/atlx/atl1.c
rename to drivers/net/ethernet/atheros/atlx/atl1.c
diff --git a/drivers/net/atlx/atl1.h b/drivers/net/ethernet/atheros/atlx/atl1.h
similarity index 100%
rename from drivers/net/atlx/atl1.h
rename to drivers/net/ethernet/atheros/atlx/atl1.h
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
similarity index 100%
rename from drivers/net/atlx/atl2.c
rename to drivers/net/ethernet/atheros/atlx/atl2.c
diff --git a/drivers/net/atlx/atl2.h b/drivers/net/ethernet/atheros/atlx/atl2.h
similarity index 100%
rename from drivers/net/atlx/atl2.h
rename to drivers/net/ethernet/atheros/atlx/atl2.h
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/ethernet/atheros/atlx/atlx.c
similarity index 100%
rename from drivers/net/atlx/atlx.c
rename to drivers/net/ethernet/atheros/atlx/atlx.c
diff --git a/drivers/net/atlx/atlx.h b/drivers/net/ethernet/atheros/atlx/atlx.h
similarity index 100%
rename from drivers/net/atlx/atlx.h
rename to drivers/net/ethernet/atheros/atlx/atlx.h
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [net-next 00/10] drivers/net organize Ethernet drivers (3rd series)
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
` (9 preceding siblings ...)
2011-08-11 23:39 ` [net-next 10/10] atl*: Move the Atheros drivers Jeff Kirsher
@ 2011-08-12 0:54 ` David Miller
10 siblings, 0 replies; 13+ messages in thread
From: David Miller @ 2011-08-12 0:54 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: netdev, gospo, sassmann
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 11 Aug 2011 16:39:48 -0700
> This is the third of seven 10 patch series to move the Ethernet
> drivers into drivers/net/ethernet/
>
> The following are changes since commit e7c379d2a0dcb8c30cb580184a0df11805464703:
> rtnetlink: remove initialization of dev->real_num_tx_queues
> and are available in the git repository at:
> master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize master
Pulled, thanks Jeff.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [net-next 06/10] xscale: Move the Intel XScale IXP drivers
2011-08-11 23:39 ` [net-next 06/10] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
@ 2011-08-14 20:25 ` Krzysztof Halasa
0 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Halasa @ 2011-08-14 20:25 UTC (permalink / raw)
To: Jeff Kirsher; +Cc: davem, netdev, gospo, sassmann, Lennert Buytenhek
Jeff Kirsher <jeffrey.t.kirsher@intel.com> writes:
> Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
> and make the necessary Kconfig and Makefile changes.
> rename drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c (100%)
To be honest I don't care if the driver is in the old or new dir.
If this changes anything:
Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
--
Krzysztof Halasa
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-08-14 20:25 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
2011-08-11 23:39 ` [net-next 01/10] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
2011-08-11 23:39 ` [net-next 02/10] tehuti: Move the Tehuti driver Jeff Kirsher
2011-08-11 23:39 ` [net-next 03/10] stmmac: Move the STMicroelectronics driver Jeff Kirsher
2011-08-11 23:39 ` [net-next 04/10] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 05/10] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 06/10] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
2011-08-14 20:25 ` Krzysztof Halasa
2011-08-11 23:39 ` [net-next 07/10] ftgmac100/ftmac100: Move the Faraday drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 08/10] 8139*/atp/r8169/sc92031: Move the Realtek drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 09/10] de6*/dl2k/sundance: Move the D-Link drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 10/10] atl*: Move the Atheros drivers Jeff Kirsher
2011-08-12 0:54 ` [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).