netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [net-next 00/10] drivers/net organize Ethernet drivers (3rd series)
@ 2011-08-11 23:39 Jeff Kirsher
  2011-08-11 23:39 ` [net-next 01/10] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
                   ` (10 more replies)
  0 siblings, 11 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann

This is the third of seven 10 patch series to move the Ethernet
drivers into drivers/net/ethernet/

The following are changes since commit e7c379d2a0dcb8c30cb580184a0df11805464703:
  rtnetlink: remove initialization of dev->real_num_tx_queues
and are available in the git repository at:
  master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize master

Jeff Kirsher (10):
  pasemic_mac*: Move the PA Semi driver
  tehuti: Move the Tehuti driver
  stmmac: Move the STMicroelectronics driver
  bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers
  *sonic/natsemi/ns83829: Move the National Semi-conductor drivers
  xscale: Move the Intel XScale IXP drivers
  ftgmac100/ftmac100: Move the Faraday drivers
  8139*/atp/r8169/sc92031: Move the Realtek drivers
  de6*/dl2k/sundance: Move the D-Link drivers
  atl*: Move the Atheros drivers

 MAINTAINERS                                        |   18 +-
 drivers/net/Kconfig                                |  389 --------------------
 drivers/net/Makefile                               |   33 --
 drivers/net/arm/Kconfig                            |    8 -
 drivers/net/arm/Makefile                           |    1 -
 drivers/net/ethernet/8390/Kconfig                  |    7 +-
 drivers/net/ethernet/Kconfig                       |   12 +-
 drivers/net/ethernet/Makefile                      |   10 +
 drivers/net/ethernet/apple/Kconfig                 |   96 +++++
 drivers/net/ethernet/apple/Makefile                |    9 +
 drivers/net/{ => ethernet/apple}/bmac.c            |    0
 drivers/net/{ => ethernet/apple}/bmac.h            |    0
 drivers/net/{ => ethernet/apple}/cs89x0.c          |    0
 drivers/net/{ => ethernet/apple}/cs89x0.h          |    0
 drivers/net/{ => ethernet/apple}/mac89x0.c         |    0
 drivers/net/{ => ethernet/apple}/mace.c            |    0
 drivers/net/{ => ethernet/apple}/mace.h            |    0
 drivers/net/{ => ethernet/apple}/macmace.c         |    0
 drivers/net/ethernet/atheros/Kconfig               |   65 ++++
 drivers/net/ethernet/atheros/Makefile              |    8 +
 drivers/net/{ => ethernet/atheros}/atl1c/Makefile  |    0
 drivers/net/{ => ethernet/atheros}/atl1c/atl1c.h   |    0
 .../{ => ethernet/atheros}/atl1c/atl1c_ethtool.c   |    0
 .../net/{ => ethernet/atheros}/atl1c/atl1c_hw.c    |    0
 .../net/{ => ethernet/atheros}/atl1c/atl1c_hw.h    |    0
 .../net/{ => ethernet/atheros}/atl1c/atl1c_main.c  |    0
 drivers/net/{ => ethernet/atheros}/atl1e/Makefile  |    0
 drivers/net/{ => ethernet/atheros}/atl1e/atl1e.h   |    0
 .../{ => ethernet/atheros}/atl1e/atl1e_ethtool.c   |    0
 .../net/{ => ethernet/atheros}/atl1e/atl1e_hw.c    |    0
 .../net/{ => ethernet/atheros}/atl1e/atl1e_hw.h    |    0
 .../net/{ => ethernet/atheros}/atl1e/atl1e_main.c  |    0
 .../net/{ => ethernet/atheros}/atl1e/atl1e_param.c |    0
 drivers/net/{ => ethernet/atheros}/atlx/Makefile   |    0
 drivers/net/{ => ethernet/atheros}/atlx/atl1.c     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atl1.h     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atl2.c     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atl2.h     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atlx.c     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atlx.h     |    0
 drivers/net/ethernet/dlink/Kconfig                 |   84 +++++
 drivers/net/ethernet/dlink/Makefile                |    8 +
 drivers/net/{ => ethernet/dlink}/de600.c           |    0
 drivers/net/{ => ethernet/dlink}/de600.h           |    0
 drivers/net/{ => ethernet/dlink}/de620.c           |    0
 drivers/net/{ => ethernet/dlink}/de620.h           |    0
 drivers/net/{ => ethernet/dlink}/dl2k.c            |    0
 drivers/net/{ => ethernet/dlink}/dl2k.h            |    0
 drivers/net/{ => ethernet/dlink}/sundance.c        |    0
 drivers/net/ethernet/faraday/Kconfig               |   38 ++
 drivers/net/ethernet/faraday/Makefile              |    6 +
 drivers/net/{ => ethernet/faraday}/ftgmac100.c     |    0
 drivers/net/{ => ethernet/faraday}/ftgmac100.h     |    0
 drivers/net/{ => ethernet/faraday}/ftmac100.c      |    0
 drivers/net/{ => ethernet/faraday}/ftmac100.h      |    0
 drivers/net/ethernet/natsemi/Kconfig               |   82 ++++
 drivers/net/ethernet/natsemi/Makefile              |   10 +
 drivers/net/{ => ethernet/natsemi}/ibmlana.c       |    0
 drivers/net/{ => ethernet/natsemi}/ibmlana.h       |    0
 drivers/net/{ => ethernet/natsemi}/jazzsonic.c     |    0
 drivers/net/{ => ethernet/natsemi}/macsonic.c      |    0
 drivers/net/{ => ethernet/natsemi}/natsemi.c       |    0
 drivers/net/{ => ethernet/natsemi}/ns83820.c       |    0
 drivers/net/{ => ethernet/natsemi}/sonic.c         |    0
 drivers/net/{ => ethernet/natsemi}/sonic.h         |    0
 drivers/net/{ => ethernet/natsemi}/xtsonic.c       |    0
 drivers/net/ethernet/pasemi/Kconfig                |   29 ++
 drivers/net/ethernet/pasemi/Makefile               |    5 +
 drivers/net/{ => ethernet/pasemi}/pasemi_mac.c     |    0
 drivers/net/{ => ethernet/pasemi}/pasemi_mac.h     |    0
 .../net/{ => ethernet/pasemi}/pasemi_mac_ethtool.c |    0
 drivers/net/{ => ethernet/realtek}/8139cp.c        |    0
 drivers/net/{ => ethernet/realtek}/8139too.c       |    0
 drivers/net/ethernet/realtek/Kconfig               |  126 +++++++
 drivers/net/ethernet/realtek/Makefile              |    9 +
 drivers/net/{ => ethernet/realtek}/atp.c           |    0
 drivers/net/{ => ethernet/realtek}/atp.h           |    0
 drivers/net/{ => ethernet/realtek}/r8169.c         |    0
 drivers/net/{ => ethernet/realtek}/sc92031.c       |    0
 drivers/net/ethernet/stmicro/Kconfig               |   22 ++
 drivers/net/ethernet/stmicro/Makefile              |    5 +
 drivers/net/{ => ethernet/stmicro}/stmmac/Kconfig  |   14 +-
 drivers/net/{ => ethernet/stmicro}/stmmac/Makefile |    0
 drivers/net/{ => ethernet/stmicro}/stmmac/common.h |    0
 drivers/net/{ => ethernet/stmicro}/stmmac/descs.h  |    0
 .../net/{ => ethernet/stmicro}/stmmac/dwmac100.h   |    0
 .../net/{ => ethernet/stmicro}/stmmac/dwmac1000.h  |    0
 .../{ => ethernet/stmicro}/stmmac/dwmac1000_core.c |    0
 .../{ => ethernet/stmicro}/stmmac/dwmac1000_dma.c  |    0
 .../{ => ethernet/stmicro}/stmmac/dwmac100_core.c  |    0
 .../{ => ethernet/stmicro}/stmmac/dwmac100_dma.c   |    0
 .../net/{ => ethernet/stmicro}/stmmac/dwmac_dma.h  |    0
 .../net/{ => ethernet/stmicro}/stmmac/dwmac_lib.c  |    0
 .../net/{ => ethernet/stmicro}/stmmac/enh_desc.c   |    0
 .../net/{ => ethernet/stmicro}/stmmac/norm_desc.c  |    0
 drivers/net/{ => ethernet/stmicro}/stmmac/stmmac.h |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_ethtool.c |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_main.c    |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_mdio.c    |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_timer.c   |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_timer.h   |    0
 drivers/net/ethernet/tehuti/Kconfig                |   26 ++
 drivers/net/ethernet/tehuti/Makefile               |    5 +
 drivers/net/{ => ethernet/tehuti}/tehuti.c         |    0
 drivers/net/{ => ethernet/tehuti}/tehuti.h         |    0
 drivers/net/ethernet/xscale/Kconfig                |   31 ++
 drivers/net/ethernet/xscale/Makefile               |    6 +
 drivers/net/{ => ethernet/xscale}/ixp2000/Kconfig  |    2 +-
 drivers/net/{ => ethernet/xscale}/ixp2000/Makefile |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/caleb.c  |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/caleb.h  |    0
 .../net/{ => ethernet/xscale}/ixp2000/enp2611.c    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400-msf.c    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400-msf.h    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400_rx.uc    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400_rx.ucode |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400_tx.uc    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400_tx.ucode |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.c |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.h |    0
 .../{ => ethernet/xscale}/ixp2000/ixpdev_priv.h    |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.c |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.h |    0
 drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c  |    0
 124 files changed, 712 insertions(+), 452 deletions(-)
 create mode 100644 drivers/net/ethernet/apple/Kconfig
 create mode 100644 drivers/net/ethernet/apple/Makefile
 rename drivers/net/{ => ethernet/apple}/bmac.c (100%)
 rename drivers/net/{ => ethernet/apple}/bmac.h (100%)
 rename drivers/net/{ => ethernet/apple}/cs89x0.c (100%)
 rename drivers/net/{ => ethernet/apple}/cs89x0.h (100%)
 rename drivers/net/{ => ethernet/apple}/mac89x0.c (100%)
 rename drivers/net/{ => ethernet/apple}/mace.c (100%)
 rename drivers/net/{ => ethernet/apple}/mace.h (100%)
 rename drivers/net/{ => ethernet/apple}/macmace.c (100%)
 create mode 100644 drivers/net/ethernet/atheros/Kconfig
 create mode 100644 drivers/net/ethernet/atheros/Makefile
 rename drivers/net/{ => ethernet/atheros}/atl1c/Makefile (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_ethtool.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_hw.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_hw.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_main.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/Makefile (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_ethtool.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_hw.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_hw.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_main.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_param.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/Makefile (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atl1.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atl1.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atl2.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atl2.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atlx.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atlx.h (100%)
 create mode 100644 drivers/net/ethernet/dlink/Kconfig
 create mode 100644 drivers/net/ethernet/dlink/Makefile
 rename drivers/net/{ => ethernet/dlink}/de600.c (100%)
 rename drivers/net/{ => ethernet/dlink}/de600.h (100%)
 rename drivers/net/{ => ethernet/dlink}/de620.c (100%)
 rename drivers/net/{ => ethernet/dlink}/de620.h (100%)
 rename drivers/net/{ => ethernet/dlink}/dl2k.c (100%)
 rename drivers/net/{ => ethernet/dlink}/dl2k.h (100%)
 rename drivers/net/{ => ethernet/dlink}/sundance.c (100%)
 create mode 100644 drivers/net/ethernet/faraday/Kconfig
 create mode 100644 drivers/net/ethernet/faraday/Makefile
 rename drivers/net/{ => ethernet/faraday}/ftgmac100.c (100%)
 rename drivers/net/{ => ethernet/faraday}/ftgmac100.h (100%)
 rename drivers/net/{ => ethernet/faraday}/ftmac100.c (100%)
 rename drivers/net/{ => ethernet/faraday}/ftmac100.h (100%)
 create mode 100644 drivers/net/ethernet/natsemi/Kconfig
 create mode 100644 drivers/net/ethernet/natsemi/Makefile
 rename drivers/net/{ => ethernet/natsemi}/ibmlana.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/ibmlana.h (100%)
 rename drivers/net/{ => ethernet/natsemi}/jazzsonic.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/macsonic.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/natsemi.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/ns83820.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/sonic.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/sonic.h (100%)
 rename drivers/net/{ => ethernet/natsemi}/xtsonic.c (100%)
 create mode 100644 drivers/net/ethernet/pasemi/Kconfig
 create mode 100644 drivers/net/ethernet/pasemi/Makefile
 rename drivers/net/{ => ethernet/pasemi}/pasemi_mac.c (100%)
 rename drivers/net/{ => ethernet/pasemi}/pasemi_mac.h (100%)
 rename drivers/net/{ => ethernet/pasemi}/pasemi_mac_ethtool.c (100%)
 rename drivers/net/{ => ethernet/realtek}/8139cp.c (100%)
 rename drivers/net/{ => ethernet/realtek}/8139too.c (100%)
 create mode 100644 drivers/net/ethernet/realtek/Kconfig
 create mode 100644 drivers/net/ethernet/realtek/Makefile
 rename drivers/net/{ => ethernet/realtek}/atp.c (100%)
 rename drivers/net/{ => ethernet/realtek}/atp.h (100%)
 rename drivers/net/{ => ethernet/realtek}/r8169.c (100%)
 rename drivers/net/{ => ethernet/realtek}/sc92031.c (100%)
 create mode 100644 drivers/net/ethernet/stmicro/Kconfig
 create mode 100644 drivers/net/ethernet/stmicro/Makefile
 rename drivers/net/{ => ethernet/stmicro}/stmmac/Kconfig (93%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/Makefile (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/common.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/descs.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000_core.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000_dma.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100_core.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100_dma.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac_dma.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac_lib.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/enh_desc.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/norm_desc.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_ethtool.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_main.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_mdio.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_timer.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_timer.h (100%)
 create mode 100644 drivers/net/ethernet/tehuti/Kconfig
 create mode 100644 drivers/net/ethernet/tehuti/Makefile
 rename drivers/net/{ => ethernet/tehuti}/tehuti.c (100%)
 rename drivers/net/{ => ethernet/tehuti}/tehuti.h (100%)
 create mode 100644 drivers/net/ethernet/xscale/Kconfig
 create mode 100644 drivers/net/ethernet/xscale/Makefile
 rename drivers/net/{ => ethernet/xscale}/ixp2000/Kconfig (94%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/Makefile (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/caleb.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/caleb.h (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/enp2611.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400-msf.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400-msf.h (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_rx.uc (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_rx.ucode (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_tx.uc (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_tx.ucode (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.h (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev_priv.h (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.h (100%)
 rename drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c (100%)

-- 
1.7.6


^ permalink raw reply	[flat|nested] 13+ messages in thread
* [net-next 01/10] pasemic_mac*: Move the PA Semi driver
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-11 23:39 ` [net-next 02/10] tehuti: Move the Tehuti driver Jeff Kirsher
                   ` (9 subsequent siblings)
  10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Olof Johansson

Move the PA Semi driver into drivers/net/ethernet/pasemi/ and
make the necessary Kconfig and Makefile changes.

CC: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Olof Johansson <olof@lixom.net>
---
 MAINTAINERS                                        |    2 +-
 drivers/net/Kconfig                                |    9 ------
 drivers/net/Makefile                               |    2 -
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/pasemi/Kconfig                |   29 ++++++++++++++++++++
 drivers/net/ethernet/pasemi/Makefile               |    5 +++
 drivers/net/{ => ethernet/pasemi}/pasemi_mac.c     |    0
 drivers/net/{ => ethernet/pasemi}/pasemi_mac.h     |    0
 .../net/{ => ethernet/pasemi}/pasemi_mac_ethtool.c |    0
 10 files changed, 37 insertions(+), 12 deletions(-)
 create mode 100644 drivers/net/ethernet/pasemi/Kconfig
 create mode 100644 drivers/net/ethernet/pasemi/Makefile
 rename drivers/net/{ => ethernet/pasemi}/pasemi_mac.c (100%)
 rename drivers/net/{ => ethernet/pasemi}/pasemi_mac.h (100%)
 rename drivers/net/{ => ethernet/pasemi}/pasemi_mac_ethtool.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index c54e736..51ac08b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4785,7 +4785,7 @@ PA SEMI ETHERNET DRIVER
 M:	Olof Johansson <olof@lixom.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/pasemi_mac.*
+F:	drivers/net/ethernet/pasemi/*
 
 PA SEMI SMBUS DRIVER
 M:	Olof Johansson <olof@lixom.net>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 08ce280..69333fe 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1457,15 +1457,6 @@ if NETDEV_10000
 config MDIO
 	tristate
 
-config PASEMI_MAC
-	tristate "PA Semi 1/10Gbit MAC"
-	depends on PPC_PASEMI && PCI && INET
-	select PHYLIB
-	select INET_LRO
-	help
-	  This driver supports the on-chip 1/10Gbit Ethernet controller on
-	  PA Semi's PWRficient line of chips.
-
 config TEHUTI
 	tristate "Tehuti Networks 10G Ethernet"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index cf1d5a2..5dfa4c3 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -147,8 +147,6 @@ obj-$(CONFIG_R8169) += r8169.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
-pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 obj-$(CONFIG_ETHOC) += ethoc.o
 obj-$(CONFIG_GRETH) += greth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 18b634e..16c206e 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -25,6 +25,7 @@ source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/myricom/Kconfig"
+source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"
 source "drivers/net/ethernet/sfc/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 288179b..a52dc26 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
+obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
 obj-$(CONFIG_SFC) += sfc/
diff --git a/drivers/net/ethernet/pasemi/Kconfig b/drivers/net/ethernet/pasemi/Kconfig
new file mode 100644
index 0000000..ccb79b8
--- /dev/null
+++ b/drivers/net/ethernet/pasemi/Kconfig
@@ -0,0 +1,29 @@
+#
+# PA Semi network device configuration
+#
+
+config NET_VENDOR_PASEMI
+	bool "PA Semi devices"
+	depends on PPC_PASEMI && PCI && INET
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about PA Semi cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_PASEMI
+
+config PASEMI_MAC
+	tristate "PA Semi 1/10Gbit MAC"
+	depends on PPC_PASEMI && PCI && INET
+	select PHYLIB
+	select INET_LRO
+	---help---
+	  This driver supports the on-chip 1/10Gbit Ethernet controller on
+	  PA Semi's PWRficient line of chips.
+
+endif # NET_VENDOR_PASEMI
diff --git a/drivers/net/ethernet/pasemi/Makefile b/drivers/net/ethernet/pasemi/Makefile
new file mode 100644
index 0000000..05db543
--- /dev/null
+++ b/drivers/net/ethernet/pasemi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the A Semi network device drivers.
+#
+
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o pasemi_mac_ethtool.o
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
similarity index 100%
rename from drivers/net/pasemi_mac.c
rename to drivers/net/ethernet/pasemi/pasemi_mac.c
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/ethernet/pasemi/pasemi_mac.h
similarity index 100%
rename from drivers/net/pasemi_mac.h
rename to drivers/net/ethernet/pasemi/pasemi_mac.h
diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/ethernet/pasemi/pasemi_mac_ethtool.c
similarity index 100%
rename from drivers/net/pasemi_mac_ethtool.c
rename to drivers/net/ethernet/pasemi/pasemi_mac_ethtool.c
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [net-next 02/10] tehuti: Move the Tehuti driver
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
  2011-08-11 23:39 ` [net-next 01/10] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-11 23:39 ` [net-next 03/10] stmmac: Move the STMicroelectronics driver Jeff Kirsher
                   ` (8 subsequent siblings)
  10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem
  Cc: Jeff Kirsher, netdev, gospo, sassmann, Alexander Indenbaum,
	Andy Gospodarek

Move the Tehuti driver into drivers/net/ethernet/tehuti/ and
make the necessary Kconfig and Makefile changes.

CC: Alexander Indenbaum <baum@tehutinetworks.net>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                                |    2 +-
 drivers/net/Kconfig                        |    6 ------
 drivers/net/Makefile                       |    1 -
 drivers/net/ethernet/Kconfig               |    1 +
 drivers/net/ethernet/Makefile              |    1 +
 drivers/net/ethernet/tehuti/Kconfig        |   26 ++++++++++++++++++++++++++
 drivers/net/ethernet/tehuti/Makefile       |    5 +++++
 drivers/net/{ => ethernet/tehuti}/tehuti.c |    0
 drivers/net/{ => ethernet/tehuti}/tehuti.h |    0
 9 files changed, 34 insertions(+), 8 deletions(-)
 create mode 100644 drivers/net/ethernet/tehuti/Kconfig
 create mode 100644 drivers/net/ethernet/tehuti/Makefile
 rename drivers/net/{ => ethernet/tehuti}/tehuti.c (100%)
 rename drivers/net/{ => ethernet/tehuti}/tehuti.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 51ac08b..c789b6f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6360,7 +6360,7 @@ M:	Alexander Indenbaum <baum@tehutinetworks.net>
 M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/tehuti*
+F:	drivers/net/ethernet/tehuti/*
 
 Telecom Clock Driver for MCPL0010
 M:	Mark Gross <mark.gross@intel.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 69333fe..d3d2febe 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1457,12 +1457,6 @@ if NETDEV_10000
 config MDIO
 	tristate
 
-config TEHUTI
-	tristate "Tehuti Networks 10G Ethernet"
-	depends on PCI
-	help
-	  Tehuti Networks 10G Ethernet NIC
-
 endif # NETDEV_10000
 
 source "drivers/net/tokenring/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 5dfa4c3..8d2d677 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_ATL1E) += atl1e/
 obj-$(CONFIG_ATL1C) += atl1c/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
-obj-$(CONFIG_TEHUTI) += tehuti.o
 obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_VMXNET3) += vmxnet3/
 
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 16c206e..8375b8b 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -31,5 +31,6 @@ source "drivers/net/ethernet/racal/Kconfig"
 source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/sun/Kconfig"
+source "drivers/net/ethernet/tehuti/Kconfig"
 
 endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index a52dc26..26324a1 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
 obj-$(CONFIG_SFC) += sfc/
 obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
 obj-$(CONFIG_NET_VENDOR_SUN) += sun/
+obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
diff --git a/drivers/net/ethernet/tehuti/Kconfig b/drivers/net/ethernet/tehuti/Kconfig
new file mode 100644
index 0000000..914ad4059
--- /dev/null
+++ b/drivers/net/ethernet/tehuti/Kconfig
@@ -0,0 +1,26 @@
+#
+# Tehuti network device configuration
+#
+
+config NET_VENDOR_TEHUTI
+	bool "Tehuti devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Tehuti cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_TEHUTI
+
+config TEHUTI
+	tristate "Tehuti Networks 10G Ethernet"
+	depends on PCI
+	---help---
+	  Tehuti Networks 10G Ethernet NIC
+
+endif # NET_VENDOR_TEHUTI
diff --git a/drivers/net/ethernet/tehuti/Makefile b/drivers/net/ethernet/tehuti/Makefile
new file mode 100644
index 0000000..f995421
--- /dev/null
+++ b/drivers/net/ethernet/tehuti/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Tehuti network device drivers.
+#
+
+obj-$(CONFIG_TEHUTI) += tehuti.o
diff --git a/drivers/net/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
similarity index 100%
rename from drivers/net/tehuti.c
rename to drivers/net/ethernet/tehuti/tehuti.c
diff --git a/drivers/net/tehuti.h b/drivers/net/ethernet/tehuti/tehuti.h
similarity index 100%
rename from drivers/net/tehuti.h
rename to drivers/net/ethernet/tehuti/tehuti.h
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [net-next 03/10] stmmac: Move the STMicroelectronics driver
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
  2011-08-11 23:39 ` [net-next 01/10] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
  2011-08-11 23:39 ` [net-next 02/10] tehuti: Move the Tehuti driver Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-11 23:39 ` [net-next 04/10] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Jeff Kirsher
                   ` (7 subsequent siblings)
  10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Giuseppe Cavallaro

Move the STMicroelectronics driver into driver/net/ethernet/stmicro/ and
make the necessary Kconfig and Makefile changes.

CC: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                                        |    2 +-
 drivers/net/Kconfig                                |    2 -
 drivers/net/Makefile                               |    1 -
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/stmicro/Kconfig               |   22 ++++++++++++++++++++
 drivers/net/ethernet/stmicro/Makefile              |    5 ++++
 drivers/net/{ => ethernet/stmicro}/stmmac/Kconfig  |   14 ++++++------
 drivers/net/{ => ethernet/stmicro}/stmmac/Makefile |    0
 drivers/net/{ => ethernet/stmicro}/stmmac/common.h |    0
 drivers/net/{ => ethernet/stmicro}/stmmac/descs.h  |    0
 .../net/{ => ethernet/stmicro}/stmmac/dwmac100.h   |    0
 .../net/{ => ethernet/stmicro}/stmmac/dwmac1000.h  |    0
 .../{ => ethernet/stmicro}/stmmac/dwmac1000_core.c |    0
 .../{ => ethernet/stmicro}/stmmac/dwmac1000_dma.c  |    0
 .../{ => ethernet/stmicro}/stmmac/dwmac100_core.c  |    0
 .../{ => ethernet/stmicro}/stmmac/dwmac100_dma.c   |    0
 .../net/{ => ethernet/stmicro}/stmmac/dwmac_dma.h  |    0
 .../net/{ => ethernet/stmicro}/stmmac/dwmac_lib.c  |    0
 .../net/{ => ethernet/stmicro}/stmmac/enh_desc.c   |    0
 .../net/{ => ethernet/stmicro}/stmmac/norm_desc.c  |    0
 drivers/net/{ => ethernet/stmicro}/stmmac/stmmac.h |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_ethtool.c |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_main.c    |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_mdio.c    |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_timer.c   |    0
 .../{ => ethernet/stmicro}/stmmac/stmmac_timer.h   |    0
 27 files changed, 37 insertions(+), 11 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/Kconfig
 create mode 100644 drivers/net/ethernet/stmicro/Makefile
 rename drivers/net/{ => ethernet/stmicro}/stmmac/Kconfig (93%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/Makefile (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/common.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/descs.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000_core.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac1000_dma.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100_core.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac100_dma.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac_dma.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/dwmac_lib.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/enh_desc.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/norm_desc.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac.h (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_ethtool.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_main.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_mdio.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_timer.c (100%)
 rename drivers/net/{ => ethernet/stmicro}/stmmac/stmmac_timer.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index c789b6f..5dffc8e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2029,7 +2029,7 @@ M:	Giuseppe Cavallaro <peppe.cavallaro@st.com>
 L:	netdev@vger.kernel.org
 W:	http://www.stlinux.com
 S:	Supported
-F:	drivers/net/stmmac/
+F:	drivers/net/ethernet/stmicro/stmmac/
 
 CYBERPRO FB DRIVER
 M:	Russell King <linux@arm.linux.org.uk>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d3d2febe..a7ec50f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1406,8 +1406,6 @@ config S6GMAC
 	  To compile this driver as a module, choose M here. The module
 	  will be called s6gmac.
 
-source "drivers/net/stmmac/Kconfig"
-
 config PCH_GBE
 	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 8d2d677..b54e308 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -67,7 +67,6 @@ obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
 obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_SH_ETH) += sh_eth.o
-obj-$(CONFIG_STMMAC_ETH) += stmmac/
 
 #
 # end link order section
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 8375b8b..c38e902 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -30,6 +30,7 @@ source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"
 source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"
+source "drivers/net/ethernet/stmicro/Kconfig"
 source "drivers/net/ethernet/sun/Kconfig"
 source "drivers/net/ethernet/tehuti/Kconfig"
 
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 26324a1..75d7a02 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -21,5 +21,6 @@ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
 obj-$(CONFIG_SFC) += sfc/
 obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
+obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
 obj-$(CONFIG_NET_VENDOR_SUN) += sun/
 obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
diff --git a/drivers/net/ethernet/stmicro/Kconfig b/drivers/net/ethernet/stmicro/Kconfig
new file mode 100644
index 0000000..e40df64
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/Kconfig
@@ -0,0 +1,22 @@
+#
+# STMicroelectronics device configuration
+#
+
+config NET_VENDOR_STMICRO
+	bool "STMicroelectronics devices"
+	depends on HAS_IOMEM
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about STMicroelectronics cards. If you say Y, you will
+	  be asked for your specific card in the following questions.
+
+if NET_VENDOR_STMICRO
+
+source "drivers/net/ethernet/stmicro/stmmac/Kconfig"
+
+endif # NET_VENDOR_STMICRO
diff --git a/drivers/net/ethernet/stmicro/Makefile b/drivers/net/ethernet/stmicro/Makefile
new file mode 100644
index 0000000..9b3bfdd
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the STMicroelectronics device drivers.
+#
+
+obj-$(CONFIG_STMMAC_ETH) += stmmac/
diff --git a/drivers/net/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
similarity index 93%
rename from drivers/net/stmmac/Kconfig
rename to drivers/net/ethernet/stmicro/stmmac/Kconfig
index 7df7df4..cda61e3 100644
--- a/drivers/net/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -1,10 +1,10 @@
 config STMMAC_ETH
 	tristate "STMicroelectronics 10/100/1000 Ethernet driver"
+	depends on HAS_IOMEM
 	select MII
 	select PHYLIB
 	select CRC32
-	depends on NETDEVICES && HAS_IOMEM
-	help
+	---help---
 	  This is the driver for the Ethernet IPs are built around a
 	  Synopsys IP Core and only tested on the STMicroelectronics
 	  platforms.
@@ -14,7 +14,7 @@ if STMMAC_ETH
 config STMMAC_DA
 	bool "STMMAC DMA arbitration scheme"
 	default n
-	help
+	---help---
 	  Selecting this option, rx has priority over Tx (only for Giga
 	  Ethernet device).
 	  By default, the DMA arbitration scheme is based on Round-robin
@@ -24,7 +24,7 @@ config STMMAC_DUAL_MAC
 	bool "STMMAC: dual mac support (EXPERIMENTAL)"
 	default n
         depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
-	help
+	---help---
 	  Some ST SoCs (for example the stx7141 and stx7200c2) have two
 	  Ethernet Controllers. This option turns on the second Ethernet
 	  device on this kind of platforms.
@@ -33,7 +33,7 @@ config STMMAC_TIMER
 	bool "STMMAC Timer optimisation"
 	default n
 	depends on RTC_HCTOSYS_DEVICE
-	help
+	---help---
 	  Use an external timer for mitigating the number of network
 	  interrupts. Currently, for SH architectures, it is possible
 	  to use the TMU channel 2 and the SH-RTC device.
@@ -45,12 +45,12 @@ choice
 config STMMAC_TMU_TIMER
         bool "TMU channel 2"
         depends on CPU_SH4
-	help
+	---help---
 
 config STMMAC_RTC_TIMER
         bool "Real time clock"
         depends on RTC_CLASS
-	help
+	---help---
 
 endchoice
 
diff --git a/drivers/net/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
similarity index 100%
rename from drivers/net/stmmac/Makefile
rename to drivers/net/ethernet/stmicro/stmmac/Makefile
diff --git a/drivers/net/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
similarity index 100%
rename from drivers/net/stmmac/common.h
rename to drivers/net/ethernet/stmicro/stmmac/common.h
diff --git a/drivers/net/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h
similarity index 100%
rename from drivers/net/stmmac/descs.h
rename to drivers/net/ethernet/stmicro/stmmac/descs.h
diff --git a/drivers/net/stmmac/dwmac100.h b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
similarity index 100%
rename from drivers/net/stmmac/dwmac100.h
rename to drivers/net/ethernet/stmicro/stmmac/dwmac100.h
diff --git a/drivers/net/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
similarity index 100%
rename from drivers/net/stmmac/dwmac1000.h
rename to drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
diff --git a/drivers/net/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
similarity index 100%
rename from drivers/net/stmmac/dwmac1000_core.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
diff --git a/drivers/net/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
similarity index 100%
rename from drivers/net/stmmac/dwmac1000_dma.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
diff --git a/drivers/net/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
similarity index 100%
rename from drivers/net/stmmac/dwmac100_core.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
diff --git a/drivers/net/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
similarity index 100%
rename from drivers/net/stmmac/dwmac100_dma.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
diff --git a/drivers/net/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
similarity index 100%
rename from drivers/net/stmmac/dwmac_dma.h
rename to drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
diff --git a/drivers/net/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
similarity index 100%
rename from drivers/net/stmmac/dwmac_lib.c
rename to drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
diff --git a/drivers/net/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
similarity index 100%
rename from drivers/net/stmmac/enh_desc.c
rename to drivers/net/ethernet/stmicro/stmmac/enh_desc.c
diff --git a/drivers/net/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
similarity index 100%
rename from drivers/net/stmmac/norm_desc.c
rename to drivers/net/ethernet/stmicro/stmmac/norm_desc.c
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
similarity index 100%
rename from drivers/net/stmmac/stmmac.h
rename to drivers/net/ethernet/stmicro/stmmac/stmmac.h
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
similarity index 100%
rename from drivers/net/stmmac/stmmac_ethtool.c
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
similarity index 100%
rename from drivers/net/stmmac/stmmac_main.c
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
similarity index 100%
rename from drivers/net/stmmac/stmmac_mdio.c
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c
similarity index 100%
rename from drivers/net/stmmac/stmmac_timer.c
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c
diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h
similarity index 100%
rename from drivers/net/stmmac/stmmac_timer.h
rename to drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [net-next 04/10] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
                   ` (2 preceding siblings ...)
  2011-08-11 23:39 ` [net-next 03/10] stmmac: Move the STMicroelectronics driver Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-11 23:39 ` [net-next 05/10] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Jeff Kirsher
                   ` (6 subsequent siblings)
  10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem
  Cc: Jeff Kirsher, netdev, gospo, sassmann, Paul Mackerras,
	Paul Mackerras, Russell Nelson

Move the Apple drivers into driver/net/ethernet/apple/ and make the
necessary Kconfig and Makefile changes.

CC: Paul Mackerras <paulus@samba.org>
CC: Paul Mackerras <paulus@au.ibm.com>
CC: Russell Nelson <nelson@crynwr.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/Kconfig                        |   75 ----------------------
 drivers/net/Makefile                       |    6 --
 drivers/net/ethernet/Kconfig               |    1 +
 drivers/net/ethernet/Makefile              |    1 +
 drivers/net/ethernet/apple/Kconfig         |   96 ++++++++++++++++++++++++++++
 drivers/net/ethernet/apple/Makefile        |    9 +++
 drivers/net/{ => ethernet/apple}/bmac.c    |    0
 drivers/net/{ => ethernet/apple}/bmac.h    |    0
 drivers/net/{ => ethernet/apple}/cs89x0.c  |    0
 drivers/net/{ => ethernet/apple}/cs89x0.h  |    0
 drivers/net/{ => ethernet/apple}/mac89x0.c |    0
 drivers/net/{ => ethernet/apple}/mace.c    |    0
 drivers/net/{ => ethernet/apple}/mace.h    |    0
 drivers/net/{ => ethernet/apple}/macmace.c |    0
 14 files changed, 107 insertions(+), 81 deletions(-)
 create mode 100644 drivers/net/ethernet/apple/Kconfig
 create mode 100644 drivers/net/ethernet/apple/Makefile
 rename drivers/net/{ => ethernet/apple}/bmac.c (100%)
 rename drivers/net/{ => ethernet/apple}/bmac.h (100%)
 rename drivers/net/{ => ethernet/apple}/cs89x0.c (100%)
 rename drivers/net/{ => ethernet/apple}/cs89x0.h (100%)
 rename drivers/net/{ => ethernet/apple}/mac89x0.c (100%)
 rename drivers/net/{ => ethernet/apple}/mace.c (100%)
 rename drivers/net/{ => ethernet/apple}/mace.h (100%)
 rename drivers/net/{ => ethernet/apple}/macmace.c (100%)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a7ec50f..d81f8f9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -237,52 +237,6 @@ config MACB
 
 source "drivers/net/arm/Kconfig"
 
-config MACE
-	tristate "MACE (Power Mac ethernet) support"
-	depends on PPC_PMAC && PPC32
-	select CRC32
-	help
-	  Power Macintoshes and clones with Ethernet built-in on the
-	  motherboard will usually use a MACE (Medium Access Control for
-	  Ethernet) interface. Say Y to include support for the MACE chip.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called mace.
-
-config MACE_AAUI_PORT
-	bool "Use AAUI port instead of TP by default"
-	depends on MACE
-	help
-	  Some Apple machines (notably the Apple Network Server) which use the
-	  MACE ethernet chip have an Apple AUI port (small 15-pin connector),
-	  instead of an 8-pin RJ45 connector for twisted-pair ethernet.  Say
-	  Y here if you have such a machine.  If unsure, say N.
-	  The driver will default to AAUI on ANS anyway, and if you use it as
-	  a module, you can provide the port_aaui=0|1 to force the driver.
-
-config BMAC
-	tristate "BMAC (G3 ethernet) support"
-	depends on PPC_PMAC && PPC32
-	select CRC32
-	help
-	  Say Y for support of BMAC Ethernet interfaces. These are used on G3
-	  computers.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called bmac.
-
-config MAC89x0
-	tristate "Macintosh CS89x0 based ethernet cards"
-	depends on MAC
-	---help---
-	  Support for CS89x0 chipset based Ethernet cards.  If you have a
-	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. This module will
-	  be called mac89x0.
-
 config MACSONIC
 	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
 	depends on MAC
@@ -296,16 +250,6 @@ config MACSONIC
 	  To compile this driver as a module, choose M here. This module will
 	  be called macsonic.
 
-config MACMACE
-	bool "Macintosh (AV) onboard MACE ethernet"
-	depends on MAC
-	select CRC32
-	help
-	  Support for the onboard AMD 79C940 MACE Ethernet controller used in
-	  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
-	  say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
 config KORINA
 	tristate "Korina (IDT RC32434) Ethernet support"
 	depends on NET_ETHERNET && MIKROTIK_RB532
@@ -677,25 +621,6 @@ config FORCEDETH
 	  To compile this driver as a module, choose M here. The module
 	  will be called forcedeth.
 
-config CS89x0
-	tristate "CS89x0 support"
-	depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
-		|| ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
-	---help---
-	  Support for CS89x0 chipset based Ethernet cards. If you have a
-	  network (Ethernet) card of this type, say Y and read the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto> as well as
-	  <file:Documentation/networking/cs89x0.txt>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called cs89x0.
-
-config CS89x0_NONISA_IRQ
-	def_bool y
-	depends on CS89x0 != n
-	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
-
 config TC35815
 	tristate "TOSHIBA TC35815 Ethernet support"
 	depends on NET_PCI && PCI && MIPS
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index b54e308..79f93f0 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -38,9 +38,6 @@ obj-$(CONFIG_PLIP) += plip.o
 
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
 
-obj-$(CONFIG_MACE) += mace.o
-obj-$(CONFIG_BMAC) += bmac.o
-
 obj-$(CONFIG_TLAN) += tlan.o
 obj-$(CONFIG_SIS190) += sis190.o
 obj-$(CONFIG_SIS900) += sis900.o
@@ -133,10 +130,7 @@ obj-$(CONFIG_KORINA) += korina.o
 obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
 obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
 obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_CS89x0) += cs89x0.o
 obj-$(CONFIG_MACSONIC) += macsonic.o
-obj-$(CONFIG_MACMACE) += macmace.o
-obj-$(CONFIG_MAC89x0) += mac89x0.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index c38e902..c3c415d 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -14,6 +14,7 @@ if ETHERNET
 source "drivers/net/ethernet/3com/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/amd/Kconfig"
+source "drivers/net/ethernet/apple/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 75d7a02..b67b88d 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
 obj-$(CONFIG_NET_VENDOR_8390) += 8390/
 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
+obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig
new file mode 100644
index 0000000..fc796bc
--- /dev/null
+++ b/drivers/net/ethernet/apple/Kconfig
@@ -0,0 +1,96 @@
+#
+# Apple device configuration
+#
+
+config NET_VENDOR_APPLE
+	bool "Apple devices"
+	depends on (PPC_PMAC && PPC32) || MAC || ISA || EISA || MACH_IXDP2351 \
+		   || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about IBM devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_APPLE
+
+config MACE
+	tristate "MACE (Power Mac ethernet) support"
+	depends on PPC_PMAC && PPC32
+	select CRC32
+	---help---
+	  Power Macintoshes and clones with Ethernet built-in on the
+	  motherboard will usually use a MACE (Medium Access Control for
+	  Ethernet) interface. Say Y to include support for the MACE chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mace.
+
+config MACE_AAUI_PORT
+	bool "Use AAUI port instead of TP by default"
+	depends on MACE
+	---help---
+	  Some Apple machines (notably the Apple Network Server) which use the
+	  MACE ethernet chip have an Apple AUI port (small 15-pin connector),
+	  instead of an 8-pin RJ45 connector for twisted-pair ethernet.  Say
+	  Y here if you have such a machine.  If unsure, say N.
+	  The driver will default to AAUI on ANS anyway, and if you use it as
+	  a module, you can provide the port_aaui=0|1 to force the driver.
+
+config BMAC
+	tristate "BMAC (G3 ethernet) support"
+	depends on PPC_PMAC && PPC32
+	select CRC32
+	---help---
+	  Say Y for support of BMAC Ethernet interfaces. These are used on G3
+	  computers.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bmac.
+
+config MAC89x0
+	tristate "Macintosh CS89x0 based ethernet cards"
+	depends on MAC
+	---help---
+	  Support for CS89x0 chipset based Ethernet cards.  If you have a
+	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. This module will
+	  be called mac89x0.
+
+config MACMACE
+	bool "Macintosh (AV) onboard MACE ethernet"
+	depends on MAC
+	select CRC32
+	---help---
+	  Support for the onboard AMD 79C940 MACE Ethernet controller used in
+	  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
+	  say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config CS89x0
+	tristate "CS89x0 support"
+	depends on (ISA || EISA || MACH_IXDP2351 \
+		|| ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
+	---help---
+	  Support for CS89x0 chipset based Ethernet cards. If you have a
+	  network (Ethernet) card of this type, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto> as well as
+	  <file:Documentation/networking/cs89x0.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called cs89x0.
+
+config CS89x0_NONISA_IRQ
+	def_bool y
+	depends on CS89x0 != n
+	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+
+endif # NET_VENDOR_APPLE
diff --git a/drivers/net/ethernet/apple/Makefile b/drivers/net/ethernet/apple/Makefile
new file mode 100644
index 0000000..9d30086
--- /dev/null
+++ b/drivers/net/ethernet/apple/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Apple network device drivers.
+#
+
+obj-$(CONFIG_MACE) += mace.o
+obj-$(CONFIG_BMAC) += bmac.o
+obj-$(CONFIG_MAC89x0) += mac89x0.o
+obj-$(CONFIG_CS89x0) += cs89x0.o
+obj-$(CONFIG_MACMACE) += macmace.o
diff --git a/drivers/net/bmac.c b/drivers/net/ethernet/apple/bmac.c
similarity index 100%
rename from drivers/net/bmac.c
rename to drivers/net/ethernet/apple/bmac.c
diff --git a/drivers/net/bmac.h b/drivers/net/ethernet/apple/bmac.h
similarity index 100%
rename from drivers/net/bmac.h
rename to drivers/net/ethernet/apple/bmac.h
diff --git a/drivers/net/cs89x0.c b/drivers/net/ethernet/apple/cs89x0.c
similarity index 100%
rename from drivers/net/cs89x0.c
rename to drivers/net/ethernet/apple/cs89x0.c
diff --git a/drivers/net/cs89x0.h b/drivers/net/ethernet/apple/cs89x0.h
similarity index 100%
rename from drivers/net/cs89x0.h
rename to drivers/net/ethernet/apple/cs89x0.h
diff --git a/drivers/net/mac89x0.c b/drivers/net/ethernet/apple/mac89x0.c
similarity index 100%
rename from drivers/net/mac89x0.c
rename to drivers/net/ethernet/apple/mac89x0.c
diff --git a/drivers/net/mace.c b/drivers/net/ethernet/apple/mace.c
similarity index 100%
rename from drivers/net/mace.c
rename to drivers/net/ethernet/apple/mace.c
diff --git a/drivers/net/mace.h b/drivers/net/ethernet/apple/mace.h
similarity index 100%
rename from drivers/net/mace.h
rename to drivers/net/ethernet/apple/mace.h
diff --git a/drivers/net/macmace.c b/drivers/net/ethernet/apple/macmace.c
similarity index 100%
rename from drivers/net/macmace.c
rename to drivers/net/ethernet/apple/macmace.c
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [net-next 05/10] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
                   ` (3 preceding siblings ...)
  2011-08-11 23:39 ` [net-next 04/10] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-11 23:39 ` [net-next 06/10] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
                   ` (5 subsequent siblings)
  10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem
  Cc: Jeff Kirsher, netdev, gospo, sassmann, Alfred Arnold,
	Thomas Bogendoerfer, Harald Welte, Tim Hockin, linux-ns83820,
	Kevin Chea, Marc Gauthier, Chris Zankel

Move the National Semi-conductor drivers into drivers/net/ethernet/natsemi/
and make the necessary Kconfig and Makefile changes.  Also moved the 8390
(National Semi-conductor) devices as a sub-menu of National Semi-conductor
devices.

- moved the ibmlana driver as well into this directory since it is a
  "SONIC" driver

CC: Alfred Arnold <alfred.arnold@lancom.de>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CC: Harald Welte <laforge@gnumonks.org>
CC: Tim Hockin <thockin@hockin.org>
CC: <linux-ns83820@kvack.org>
CC: Kevin Chea <kchea@yahoo.com>
CC: Marc Gauthier <marc@linux-xtensa.org>
CC: Chris Zankel <chris@zankel.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Marc Gauthier <marc@tensilica.com>
---
 MAINTAINERS                                    |    4 +-
 drivers/net/Kconfig                            |   62 ------------------
 drivers/net/Makefile                           |    7 --
 drivers/net/ethernet/8390/Kconfig              |    7 +-
 drivers/net/ethernet/Kconfig                   |    3 +-
 drivers/net/ethernet/Makefile                  |    1 +
 drivers/net/ethernet/natsemi/Kconfig           |   82 ++++++++++++++++++++++++
 drivers/net/ethernet/natsemi/Makefile          |   10 +++
 drivers/net/{ => ethernet/natsemi}/ibmlana.c   |    0
 drivers/net/{ => ethernet/natsemi}/ibmlana.h   |    0
 drivers/net/{ => ethernet/natsemi}/jazzsonic.c |    0
 drivers/net/{ => ethernet/natsemi}/macsonic.c  |    0
 drivers/net/{ => ethernet/natsemi}/natsemi.c   |    0
 drivers/net/{ => ethernet/natsemi}/ns83820.c   |    0
 drivers/net/{ => ethernet/natsemi}/sonic.c     |    0
 drivers/net/{ => ethernet/natsemi}/sonic.h     |    0
 drivers/net/{ => ethernet/natsemi}/xtsonic.c   |    0
 17 files changed, 101 insertions(+), 75 deletions(-)
 create mode 100644 drivers/net/ethernet/natsemi/Kconfig
 create mode 100644 drivers/net/ethernet/natsemi/Makefile
 rename drivers/net/{ => ethernet/natsemi}/ibmlana.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/ibmlana.h (100%)
 rename drivers/net/{ => ethernet/natsemi}/jazzsonic.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/macsonic.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/natsemi.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/ns83820.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/sonic.c (100%)
 rename drivers/net/{ => ethernet/natsemi}/sonic.h (100%)
 rename drivers/net/{ => ethernet/natsemi}/xtsonic.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 5dffc8e..554529d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4340,7 +4340,7 @@ F:	drivers/net/ethernet/myricom/myri10ge/
 NATSEMI ETHERNET DRIVER (DP8381x)
 M:	Tim Hockin <thockin@hockin.org>
 S:	Maintained
-F:	drivers/net/natsemi.c
+F:	drivers/net/ethernet/natsemi/natsemi.c
 
 NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
 M:	Daniel Mack <zonque@gmail.com>
@@ -5943,7 +5943,7 @@ SONIC NETWORK DRIVER
 M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/sonic.*
+F:	drivers/net/ethernet/natsemi/sonic.*
 
 SONICS SILICON BACKPLANE DRIVER (SSB)
 M:	Michael Buesch <m@bues.ch>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d81f8f9..8b1fae8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -237,19 +237,6 @@ config MACB
 
 source "drivers/net/arm/Kconfig"
 
-config MACSONIC
-	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
-	depends on MAC
-	---help---
-	  Support for NatSemi SONIC based Ethernet devices.  This includes
-	  the onboard Ethernet in many Quadras as well as some LC-PDS,
-	  a few Nubus and all known Comm Slot Ethernet cards.  If you have
-	  one of these say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. This module will
-	  be called macsonic.
-
 config KORINA
 	tristate "Korina (IDT RC32434) Ethernet support"
 	depends on NET_ETHERNET && MIKROTIK_RB532
@@ -257,19 +244,6 @@ config KORINA
 	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
 	  based system say Y. Otherwise say N.
 
-config MIPS_JAZZ_SONIC
-	tristate "MIPS JAZZ onboard SONIC Ethernet support"
-	depends on MACH_JAZZ
-	help
-	  This is the driver for the onboard card of MIPS Magnum 4000,
-	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
-
-config XTENSA_XT2000_SONIC
-	tristate "Xtensa XT2000 onboard SONIC Ethernet support"
-	depends on XTENSA_PLATFORM_XT2000
-	help
-	  This is the driver for the onboard card of the Xtensa XT2000 board.
-
 config SGI_IOC3_ETH
 	bool "SGI IOC3 Ethernet"
 	depends on PCI && SGI_IP27
@@ -556,21 +530,6 @@ config SEEQ8005
 	  To compile this driver as a module, choose M here. The module
 	  will be called seeq8005.
 
-config IBMLANA
-	tristate "IBM LAN Adapter/A support"
-	depends on MCA
-	---help---
-	  This is a Micro Channel Ethernet adapter.  You need to set
-	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
-	  driver and as a module.
-
-	  To compile this driver as a module, choose M here. The only
-	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
-	  will both support 16K and 32K memory windows, however a 32K window
-	  gives a better security against packet losses.  Usage of multiple
-	  boards with this driver should be possible, but has not been tested
-	  up to now due to lack of hardware.
-
 config NET_PCI
 	bool "EISA, VLB, PCI and on board controllers"
 	depends on ISA || EISA || PCI
@@ -635,17 +594,6 @@ config FEALNX
 	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 
 	  cards. <http://www.myson.com.tw/>
 
-config NATSEMI
-	tristate "National Semiconductor DP8381x series PCI Ethernet support"
-	depends on NET_PCI && PCI
-	select CRC32
-	help
-	  This driver is for the National Semiconductor DP83810 series,
-	  which is used in cards from PureData, NetGear, Linksys
-	  and others, including the 83815 chip.
-	  More specific information and updates are available from
-	  <http://www.scyld.com/network/natsemi.html>.
-
 config 8139CP
 	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
 	depends on NET_PCI && PCI && EXPERIMENTAL
@@ -1043,16 +991,6 @@ config IP1000
 
 source "drivers/net/ixp2000/Kconfig"
 
-config NS83820
-	tristate "National Semiconductor DP83820 support"
-	depends on PCI
-	help
-	  This is a driver for the National Semiconductor DP83820 series
-	  of gigabit ethernet MACs.  Cards using this chipset include
-	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
-	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
-	  zero copy.
-
 config HAMACHI
 	tristate "Packet Engines Hamachi GNIC-II support"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 79f93f0..843edb3 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -43,8 +43,6 @@ obj-$(CONFIG_SIS190) += sis190.o
 obj-$(CONFIG_SIS900) += sis900.o
 obj-$(CONFIG_R6040) += r6040.o
 obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-obj-$(CONFIG_NATSEMI) += natsemi.o
-obj-$(CONFIG_NS83820) += ns83820.o
 obj-$(CONFIG_FEALNX) += fealnx.o
 spidernet-y += spider_net.o spider_net_ethtool.o
 obj-$(CONFIG_SPIDER_NET) += spidernet.o ethernet/sun/sungem_phy.o
@@ -116,7 +114,6 @@ obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_SGISEEQ) += sgiseeq.o
 obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
 obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_IBMLANA) += ibmlana.o
 obj-$(CONFIG_8139CP) += 8139cp.o
 obj-$(CONFIG_8139TOO) += 8139too.o
 obj-$(CONFIG_CPMAC) += cpmac.o
@@ -127,10 +124,8 @@ obj-$(CONFIG_SC92031) += sc92031.o
 obj-$(CONFIG_ETH16I) += eth16i.o
 obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_KORINA) += korina.o
-obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
 obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
 obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_MACSONIC) += macsonic.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
@@ -144,8 +139,6 @@ obj-$(CONFIG_ETHOC) += ethoc.o
 obj-$(CONFIG_GRETH) += greth.o
 obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
 
-obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
-
 obj-$(CONFIG_DNET) += dnet.o
 obj-$(CONFIG_MACB) += macb.o
 obj-$(CONFIG_S6GMAC) += s6gmac.o
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index f1b9bdd..5d21698 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -4,9 +4,10 @@
 
 config NET_VENDOR_8390
 	bool "National Semi-conductor 8390 devices"
-	depends on AMIGA_PCMCIA || PCI || SUPERH || ISA || MCA || EISA ||  \
-		   MAC || M32R || MACH_TX49XX || MCA_LEGACY || H8300 ||  \
-		   ARM || MIPS || ZORRO || PCMCIA || EXPERIMENTAL
+	depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
+		   ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \
+		   MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \
+		   EXPERIMENTAL)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index c3c415d..efc3665 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -12,7 +12,6 @@ menuconfig ETHERNET
 if ETHERNET
 
 source "drivers/net/ethernet/3com/Kconfig"
-source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/apple/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
@@ -26,6 +25,8 @@ source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/myricom/Kconfig"
+source "drivers/net/ethernet/natsemi/Kconfig"
+source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index b67b88d..668ca92 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
+obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
 obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig
new file mode 100644
index 0000000..1e5c1e1
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/Kconfig
@@ -0,0 +1,82 @@
+#
+# National Semi-conductor device configuration
+#
+
+config NET_VENDOR_NATSEMI
+	bool "National Semi-conductor devices"
+	depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about National Semi-conductor devices. If you say Y,
+	  you will be asked for your specific card in the following questions.
+
+if NET_VENDOR_NATSEMI
+
+config IBMLANA
+	tristate "IBM LAN Adapter/A support"
+	depends on MCA
+	---help---
+	  This is a Micro Channel Ethernet adapter.  You need to set
+	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
+	  driver and as a module.
+
+	  To compile this driver as a module, choose M here. The only
+	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
+	  will both support 16K and 32K memory windows, however a 32K window
+	  gives a better security against packet losses.  Usage of multiple
+	  boards with this driver should be possible, but has not been tested
+	  up to now due to lack of hardware.
+
+config MACSONIC
+	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
+	depends on MAC
+	---help---
+	  Support for NatSemi SONIC based Ethernet devices.  This includes
+	  the onboard Ethernet in many Quadras as well as some LC-PDS,
+	  a few Nubus and all known Comm Slot Ethernet cards.  If you have
+	  one of these say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. This module will
+	  be called macsonic.
+
+config MIPS_JAZZ_SONIC
+	tristate "MIPS JAZZ onboard SONIC Ethernet support"
+	depends on MACH_JAZZ
+	---help---
+	  This is the driver for the onboard card of MIPS Magnum 4000,
+	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
+
+config NATSEMI
+	tristate "National Semiconductor DP8381x series PCI Ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver is for the National Semiconductor DP83810 series,
+	  which is used in cards from PureData, NetGear, Linksys
+	  and others, including the 83815 chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/natsemi.html>.
+
+config NS83820
+	tristate "National Semiconductor DP83820 support"
+	depends on PCI
+	---help---
+	  This is a driver for the National Semiconductor DP83820 series
+	  of gigabit ethernet MACs.  Cards using this chipset include
+	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
+	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
+	  zero copy.
+
+config XTENSA_XT2000_SONIC
+	tristate "Xtensa XT2000 onboard SONIC Ethernet support"
+	depends on XTENSA_PLATFORM_XT2000
+	---help---
+	  This is the driver for the onboard card of the Xtensa XT2000 board.
+
+endif # NET_VENDOR_NATSEMI
diff --git a/drivers/net/ethernet/natsemi/Makefile b/drivers/net/ethernet/natsemi/Makefile
new file mode 100644
index 0000000..9aa5dea
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the National Semi-conductor Sonic devices.
+#
+
+obj-$(CONFIG_IBMLANA) += ibmlana.o
+obj-$(CONFIG_MACSONIC) += macsonic.o
+obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+obj-$(CONFIG_NATSEMI) += natsemi.o
+obj-$(CONFIG_NS83820) += ns83820.o
+obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
diff --git a/drivers/net/ibmlana.c b/drivers/net/ethernet/natsemi/ibmlana.c
similarity index 100%
rename from drivers/net/ibmlana.c
rename to drivers/net/ethernet/natsemi/ibmlana.c
diff --git a/drivers/net/ibmlana.h b/drivers/net/ethernet/natsemi/ibmlana.h
similarity index 100%
rename from drivers/net/ibmlana.h
rename to drivers/net/ethernet/natsemi/ibmlana.h
diff --git a/drivers/net/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
similarity index 100%
rename from drivers/net/jazzsonic.c
rename to drivers/net/ethernet/natsemi/jazzsonic.c
diff --git a/drivers/net/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c
similarity index 100%
rename from drivers/net/macsonic.c
rename to drivers/net/ethernet/natsemi/macsonic.c
diff --git a/drivers/net/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c
similarity index 100%
rename from drivers/net/natsemi.c
rename to drivers/net/ethernet/natsemi/natsemi.c
diff --git a/drivers/net/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
similarity index 100%
rename from drivers/net/ns83820.c
rename to drivers/net/ethernet/natsemi/ns83820.c
diff --git a/drivers/net/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
similarity index 100%
rename from drivers/net/sonic.c
rename to drivers/net/ethernet/natsemi/sonic.c
diff --git a/drivers/net/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
similarity index 100%
rename from drivers/net/sonic.h
rename to drivers/net/ethernet/natsemi/sonic.h
diff --git a/drivers/net/xtsonic.c b/drivers/net/ethernet/natsemi/xtsonic.c
similarity index 100%
rename from drivers/net/xtsonic.c
rename to drivers/net/ethernet/natsemi/xtsonic.c
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [net-next 06/10] xscale: Move the Intel XScale IXP drivers
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
                   ` (4 preceding siblings ...)
  2011-08-11 23:39 ` [net-next 05/10] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-14 20:25   ` Krzysztof Halasa
  2011-08-11 23:39 ` [net-next 07/10] ftgmac100/ftmac100: Move the Faraday drivers Jeff Kirsher
                   ` (4 subsequent siblings)
  10 siblings, 1 reply; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem
  Cc: Jeff Kirsher, netdev, gospo, sassmann, Krzysztof Halasa,
	Lennert Buytenhek

Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
and make the necessary Kconfig and Makefile changes.

CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                                        |    4 +-
 drivers/net/Kconfig                                |    2 -
 drivers/net/Makefile                               |    1 -
 drivers/net/arm/Kconfig                            |    8 -----
 drivers/net/arm/Makefile                           |    1 -
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/xscale/Kconfig                |   31 ++++++++++++++++++++
 drivers/net/ethernet/xscale/Makefile               |    6 ++++
 drivers/net/{ => ethernet/xscale}/ixp2000/Kconfig  |    2 +-
 drivers/net/{ => ethernet/xscale}/ixp2000/Makefile |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/caleb.c  |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/caleb.h  |    0
 .../net/{ => ethernet/xscale}/ixp2000/enp2611.c    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400-msf.c    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400-msf.h    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400_rx.uc    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400_rx.ucode |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400_tx.uc    |    0
 .../{ => ethernet/xscale}/ixp2000/ixp2400_tx.ucode |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.c |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.h |    0
 .../{ => ethernet/xscale}/ixp2000/ixpdev_priv.h    |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.c |    0
 drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.h |    0
 drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c  |    0
 26 files changed, 42 insertions(+), 15 deletions(-)
 create mode 100644 drivers/net/ethernet/xscale/Kconfig
 create mode 100644 drivers/net/ethernet/xscale/Makefile
 rename drivers/net/{ => ethernet/xscale}/ixp2000/Kconfig (94%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/Makefile (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/caleb.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/caleb.h (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/enp2611.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400-msf.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400-msf.h (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_rx.uc (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_rx.ucode (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_tx.uc (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixp2400_tx.ucode (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev.h (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/ixpdev_priv.h (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.c (100%)
 rename drivers/net/{ => ethernet/xscale}/ixp2000/pm3386.h (100%)
 rename drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 554529d..39607a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3319,7 +3319,7 @@ F:	arch/arm/mach-ixp4xx/include/mach/qmgr.h
 F:	arch/arm/mach-ixp4xx/include/mach/npe.h
 F:	arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
 F:	arch/arm/mach-ixp4xx/ixp4xx_npe.c
-F:	drivers/net/arm/ixp4xx_eth.c
+F:	drivers/net/ethernet/xscale/ixp4xx_eth.c
 F:	drivers/net/wan/ixp4xx_hss.c
 
 INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
@@ -3331,7 +3331,7 @@ INTEL IXP2000 ETHERNET DRIVER
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ixp2000/
+F:	drivers/net/ethernet/xscale/ixp2000/
 
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8b1fae8..7f09cd5 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -989,8 +989,6 @@ config IP1000
 	  To compile this driver as a module, choose M here: the module
 	  will be called ipg.  This is recommended.
 
-source "drivers/net/ixp2000/Kconfig"
-
 config HAMACHI
 	tristate "Packet Engines Hamachi GNIC-II support"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 843edb3..ffcb609 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -166,7 +166,6 @@ obj-$(CONFIG_NET_TULIP) += tulip/
 obj-$(CONFIG_HAMRADIO) += hamradio/
 obj-$(CONFIG_IRDA) += irda/
 obj-$(CONFIG_ETRAX_ETHERNET) += cris/
-obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
 
 obj-$(CONFIG_NETCONSOLE) += netconsole.o
 
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 7848b5f..4320e88 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -34,14 +34,6 @@ config EP93XX_ETH
 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
 	  Say Y if you are building a kernel for EP93xx based devices.
 
-config IXP4XX_ETH
-	tristate "Intel IXP4xx Ethernet support"
-	depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
-	select PHYLIB
-	help
-	  Say Y here if you want to use built-in Ethernet ports
-	  on IXP4xx processor.
-
 config W90P910_ETH
 	tristate "Nuvoton w90p910 Ethernet support"
 	depends on ARM && ARCH_W90X900
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 6cca728..5a0f141 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -7,5 +7,4 @@ obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
 obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
 obj-$(CONFIG_ARM_KS8695_ETHER)	+= ks8695net.o
 obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o
-obj-$(CONFIG_IXP4XX_ETH)	+= ixp4xx_eth.o
 obj-$(CONFIG_W90P910_ETH)	+= w90p910_ether.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index efc3665..45d3eff 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -23,6 +23,7 @@ source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
+source "drivers/net/ethernet/xscale/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/myricom/Kconfig"
 source "drivers/net/ethernet/natsemi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 668ca92..09536de 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
 obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
+obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
 obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
new file mode 100644
index 0000000..6bbcc54
--- /dev/null
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -0,0 +1,31 @@
+#
+# Intel XScale IXP device configuration
+#
+
+config NET_VENDOR_XSCALE
+	bool "Intel XScale IXP devices"
+	depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \
+		   IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question does not directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about XSacle IXP devices. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_VENDOR_XSCALE
+
+config IXP4XX_ETH
+	tristate "Intel IXP4xx Ethernet support"
+	depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+	select PHYLIB
+	---help---
+	  Say Y here if you want to use built-in Ethernet ports
+	  on IXP4xx processor.
+
+source "drivers/net/ethernet/xscale/ixp2000/Kconfig"
+
+endif # NET_VENDOR_XSCALE
diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile
new file mode 100644
index 0000000..b195b9d
--- /dev/null
+++ b/drivers/net/ethernet/xscale/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Intel XScale IXP device drivers.
+#
+
+obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
diff --git a/drivers/net/ixp2000/Kconfig b/drivers/net/ethernet/xscale/ixp2000/Kconfig
similarity index 94%
rename from drivers/net/ixp2000/Kconfig
rename to drivers/net/ethernet/xscale/ixp2000/Kconfig
index 2fec241..58dbc5b 100644
--- a/drivers/net/ixp2000/Kconfig
+++ b/drivers/net/ethernet/xscale/ixp2000/Kconfig
@@ -1,6 +1,6 @@
 config ENP2611_MSF_NET
 	tristate "Radisys ENP2611 MSF network interface support"
 	depends on ARCH_ENP2611
-	help
+	---help---
 	  This is a driver for the MSF network interface unit in
 	  the IXP2400 on the Radisys ENP2611 platform.
diff --git a/drivers/net/ixp2000/Makefile b/drivers/net/ethernet/xscale/ixp2000/Makefile
similarity index 100%
rename from drivers/net/ixp2000/Makefile
rename to drivers/net/ethernet/xscale/ixp2000/Makefile
diff --git a/drivers/net/ixp2000/caleb.c b/drivers/net/ethernet/xscale/ixp2000/caleb.c
similarity index 100%
rename from drivers/net/ixp2000/caleb.c
rename to drivers/net/ethernet/xscale/ixp2000/caleb.c
diff --git a/drivers/net/ixp2000/caleb.h b/drivers/net/ethernet/xscale/ixp2000/caleb.h
similarity index 100%
rename from drivers/net/ixp2000/caleb.h
rename to drivers/net/ethernet/xscale/ixp2000/caleb.h
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ethernet/xscale/ixp2000/enp2611.c
similarity index 100%
rename from drivers/net/ixp2000/enp2611.c
rename to drivers/net/ethernet/xscale/ixp2000/enp2611.c
diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c
similarity index 100%
rename from drivers/net/ixp2000/ixp2400-msf.c
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c
diff --git a/drivers/net/ixp2000/ixp2400-msf.h b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
similarity index 100%
rename from drivers/net/ixp2000/ixp2400-msf.h
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h
diff --git a/drivers/net/ixp2000/ixp2400_rx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc
similarity index 100%
rename from drivers/net/ixp2000/ixp2400_rx.uc
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc
diff --git a/drivers/net/ixp2000/ixp2400_rx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode
similarity index 100%
rename from drivers/net/ixp2000/ixp2400_rx.ucode
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode
diff --git a/drivers/net/ixp2000/ixp2400_tx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
similarity index 100%
rename from drivers/net/ixp2000/ixp2400_tx.uc
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
diff --git a/drivers/net/ixp2000/ixp2400_tx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode
similarity index 100%
rename from drivers/net/ixp2000/ixp2400_tx.ucode
rename to drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ethernet/xscale/ixp2000/ixpdev.c
similarity index 100%
rename from drivers/net/ixp2000/ixpdev.c
rename to drivers/net/ethernet/xscale/ixp2000/ixpdev.c
diff --git a/drivers/net/ixp2000/ixpdev.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev.h
similarity index 100%
rename from drivers/net/ixp2000/ixpdev.h
rename to drivers/net/ethernet/xscale/ixp2000/ixpdev.h
diff --git a/drivers/net/ixp2000/ixpdev_priv.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h
similarity index 100%
rename from drivers/net/ixp2000/ixpdev_priv.h
rename to drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ethernet/xscale/ixp2000/pm3386.c
similarity index 100%
rename from drivers/net/ixp2000/pm3386.c
rename to drivers/net/ethernet/xscale/ixp2000/pm3386.c
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ethernet/xscale/ixp2000/pm3386.h
similarity index 100%
rename from drivers/net/ixp2000/pm3386.h
rename to drivers/net/ethernet/xscale/ixp2000/pm3386.h
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
similarity index 100%
rename from drivers/net/arm/ixp4xx_eth.c
rename to drivers/net/ethernet/xscale/ixp4xx_eth.c
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [net-next 07/10] ftgmac100/ftmac100: Move the Faraday drivers
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
                   ` (5 preceding siblings ...)
  2011-08-11 23:39 ` [net-next 06/10] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-11 23:39 ` [net-next 08/10] 8139*/atp/r8169/sc92031: Move the Realtek drivers Jeff Kirsher
                   ` (3 subsequent siblings)
  10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Po-Yu Chuang

Move the Faraday driver into drivers/net/ethernet/faraday/ and
make the necessary Kconfig and Makefile changes.

CC: "Po-Yu Chuang" <ratbert@faraday-tech.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Po-Yu Chuang <ratbert@faraday-tech.com>
---
 drivers/net/Kconfig                            |   18 -----------
 drivers/net/Makefile                           |    2 -
 drivers/net/ethernet/Kconfig                   |    1 +
 drivers/net/ethernet/Makefile                  |    1 +
 drivers/net/ethernet/faraday/Kconfig           |   38 ++++++++++++++++++++++++
 drivers/net/ethernet/faraday/Makefile          |    6 ++++
 drivers/net/{ => ethernet/faraday}/ftgmac100.c |    0
 drivers/net/{ => ethernet/faraday}/ftgmac100.h |    0
 drivers/net/{ => ethernet/faraday}/ftmac100.c  |    0
 drivers/net/{ => ethernet/faraday}/ftmac100.h  |    0
 10 files changed, 46 insertions(+), 20 deletions(-)
 create mode 100644 drivers/net/ethernet/faraday/Kconfig
 create mode 100644 drivers/net/ethernet/faraday/Makefile
 rename drivers/net/{ => ethernet/faraday}/ftgmac100.c (100%)
 rename drivers/net/{ => ethernet/faraday}/ftgmac100.h (100%)
 rename drivers/net/{ => ethernet/faraday}/ftmac100.c (100%)
 rename drivers/net/{ => ethernet/faraday}/ftmac100.h (100%)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7f09cd5..8da9f96 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -922,15 +922,6 @@ config XILINX_EMACLITE
 	help
 	  This driver supports the 10/100 Ethernet Lite from Xilinx.
 
-config FTMAC100
-	tristate "Faraday FTMAC100 10/100 Ethernet support"
-	depends on ARM
-	select MII
-	help
-	  This driver supports the FTMAC100 10/100 Ethernet controller
-	  from Faraday. It is used on Faraday A320, Andes AG101 and some
-	  other ARM/NDS32 SoC's.
-
 config LANTIQ_ETOP
 	tristate "Lantiq SoC ETOP driver"
 	depends on SOC_TYPE_XWAY
@@ -1286,15 +1277,6 @@ config PCH_GBE
 	  ML7223 is companion chip for Intel Atom E6xx series.
 	  ML7223 is completely compatible for Intel EG20T PCH.
 
-config FTGMAC100
-	tristate "Faraday FTGMAC100 Gigabit Ethernet support"
-	depends on ARM
-	select PHYLIB
-	help
-	  This driver supports the FTGMAC100 Gigabit Ethernet controller
-	  from Faraday. It is used on Faraday A369, Andes AG102 and some
-	  other ARM/NDS32 SoC's.
-
 endif # NETDEV_1000
 
 #
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ffcb609..0b341dc 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -79,8 +79,6 @@ ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
 	obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
 endif
 obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_FTGMAC100) += ftgmac100.o
-obj-$(CONFIG_FTMAC100) += ftmac100.o
 
 obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 45d3eff..110071e 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -20,6 +20,7 @@ source "drivers/net/ethernet/chelsio/Kconfig"
 source "drivers/net/ethernet/cisco/Kconfig"
 source "drivers/net/ethernet/emulex/Kconfig"
 source "drivers/net/ethernet/neterion/Kconfig"
+source "drivers/net/ethernet/faraday/Kconfig"
 source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 09536de..4a6edf7 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
 obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
 obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
 obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
+obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
 obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
new file mode 100644
index 0000000..b0d76f0
--- /dev/null
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -0,0 +1,38 @@
+#
+# Faraday device configuration
+#
+
+config NET_VENDOR_FARADAY
+	bool "Faraday devices"
+	depends on ARM
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Faraday cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_FARADAY
+
+config FTMAC100
+	tristate "Faraday FTMAC100 10/100 Ethernet support"
+	depends on ARM
+	select MII
+	---help---
+	  This driver supports the FTMAC100 10/100 Ethernet controller
+	  from Faraday. It is used on Faraday A320, Andes AG101 and some
+	  other ARM/NDS32 SoC's.
+
+config FTGMAC100
+	tristate "Faraday FTGMAC100 Gigabit Ethernet support"
+	depends on ARM
+	select PHYLIB
+	---help---
+	  This driver supports the FTGMAC100 Gigabit Ethernet controller
+	  from Faraday. It is used on Faraday A369, Andes AG102 and some
+	  other ARM/NDS32 SoC's.
+
+endif # NET_VENDOR_FARADAY
diff --git a/drivers/net/ethernet/faraday/Makefile b/drivers/net/ethernet/faraday/Makefile
new file mode 100644
index 0000000..408b539
--- /dev/null
+++ b/drivers/net/ethernet/faraday/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Faraday device drivers.
+#
+
+obj-$(CONFIG_FTGMAC100) += ftgmac100.o
+obj-$(CONFIG_FTMAC100) += ftmac100.o
diff --git a/drivers/net/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
similarity index 100%
rename from drivers/net/ftgmac100.c
rename to drivers/net/ethernet/faraday/ftgmac100.c
diff --git a/drivers/net/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
similarity index 100%
rename from drivers/net/ftgmac100.h
rename to drivers/net/ethernet/faraday/ftgmac100.h
diff --git a/drivers/net/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c
similarity index 100%
rename from drivers/net/ftmac100.c
rename to drivers/net/ethernet/faraday/ftmac100.c
diff --git a/drivers/net/ftmac100.h b/drivers/net/ethernet/faraday/ftmac100.h
similarity index 100%
rename from drivers/net/ftmac100.h
rename to drivers/net/ethernet/faraday/ftmac100.h
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [net-next 08/10] 8139*/atp/r8169/sc92031: Move the Realtek drivers
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
                   ` (6 preceding siblings ...)
  2011-08-11 23:39 ` [net-next 07/10] ftgmac100/ftmac100: Move the Faraday drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-11 23:39 ` [net-next 09/10] de6*/dl2k/sundance: Move the D-Link drivers Jeff Kirsher
                   ` (2 subsequent siblings)
  10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem
  Cc: Jeff Kirsher, netdev, gospo, sassmann,
	Realtek linux nic maintainers, Francois Romieu, Jeff Garzik,
	Donald Becker

Move the Realtek drivers into drivers/net/ethernet/realtek/ and make
the necessary Kconfig and Makefile changes.

CC: Realtek linux nic maintainers <nic_swsd@realtek.com>
CC: Francois Romieu <romieu@fr.zoreil.com>
CC: Jeff Garzik <jgarzik@pobox.com>
CC: Donald Becker <becker@scyld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                                  |    2 +-
 drivers/net/Kconfig                          |  106 ----------------------
 drivers/net/Makefile                         |    5 -
 drivers/net/ethernet/Kconfig                 |    1 +
 drivers/net/ethernet/Makefile                |    1 +
 drivers/net/{ => ethernet/realtek}/8139cp.c  |    0
 drivers/net/{ => ethernet/realtek}/8139too.c |    0
 drivers/net/ethernet/realtek/Kconfig         |  126 ++++++++++++++++++++++++++
 drivers/net/ethernet/realtek/Makefile        |    9 ++
 drivers/net/{ => ethernet/realtek}/atp.c     |    0
 drivers/net/{ => ethernet/realtek}/atp.h     |    0
 drivers/net/{ => ethernet/realtek}/r8169.c   |    0
 drivers/net/{ => ethernet/realtek}/sc92031.c |    0
 13 files changed, 138 insertions(+), 112 deletions(-)
 rename drivers/net/{ => ethernet/realtek}/8139cp.c (100%)
 rename drivers/net/{ => ethernet/realtek}/8139too.c (100%)
 create mode 100644 drivers/net/ethernet/realtek/Kconfig
 create mode 100644 drivers/net/ethernet/realtek/Makefile
 rename drivers/net/{ => ethernet/realtek}/atp.c (100%)
 rename drivers/net/{ => ethernet/realtek}/atp.h (100%)
 rename drivers/net/{ => ethernet/realtek}/r8169.c (100%)
 rename drivers/net/{ => ethernet/realtek}/sc92031.c (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 39607a9..88ff9ef 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -156,7 +156,7 @@ M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/r8169.c
+F:	drivers/net/ethernet/realtek/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8da9f96..42408d7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -594,73 +594,6 @@ config FEALNX
 	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 
 	  cards. <http://www.myson.com.tw/>
 
-config 8139CP
-	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL8139C+ chips. If you have one of those, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8139cp.  This is recommended.
-
-config 8139TOO
-	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
-	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8139too.  This is recommended.
-
-config 8139TOO_PIO
-	bool "Use PIO instead of MMIO"
-	default y
-	depends on 8139TOO
-	help
-	  This instructs the driver to use programmed I/O ports (PIO) instead
-	  of PCI shared memory (MMIO).  This can possibly solve some problems
-	  in case your mainboard has memory consistency issues.  If unsure,
-	  say N.
-
-config 8139TOO_TUNE_TWISTER
-	bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
-	depends on 8139TOO
-	help
-	  This implements a function which might come in handy in case you
-	  are using low quality on long cabling. It is required for RealTek
-	  RTL-8139 revision K boards, and totally unused otherwise.  It tries
-	  to match the transceiver to the cable characteristics. This is
-	  experimental since hardly documented by the manufacturer.
-	  If unsure, say Y.
-
-config 8139TOO_8129
-	bool "Support for older RTL-8129/8130 boards"
-	depends on 8139TOO
-	help
-	  This enables support for the older and uncommon RTL-8129 and
-	  RTL-8130 chips, which support MII via an external transceiver,
-	  instead of an internal one.  Disabling this option will save some
-	  memory by making the code size smaller.  If unsure, say Y.
-
-config 8139_OLD_RX_RESET
-	bool "Use older RX-reset method"
-	depends on 8139TOO
-	help
-	  The 8139too driver was recently updated to contain a more rapid
-	  reset sequence, in the face of severe receive errors.  This "new"
-	  RX-reset method should be adequate for all boards.  But if you
-	  experience problems, you can enable this option to restore the
-	  old RX-reset behavior.  If unsure, say N.
-
 config R6040
 	tristate "RDC R6040 Fast Ethernet Adapter support"
 	depends on NET_PCI && PCI
@@ -776,18 +709,6 @@ config VIA_RHINE_MMIO
 
 	  If unsure, say Y.
 
-config SC92031
-	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
-	select CRC32
-	---help---
-	  This is a driver for the Fast Ethernet PCI network cards based on
-	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
-	  have one of these, say Y here.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sc92031.  This is recommended.
-
 config CPMAC
 	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
 	depends on NET_ETHERNET && EXPERIMENTAL && AR7
@@ -819,21 +740,6 @@ config NET_POCKET
 	  the questions about this class of network devices. If you say Y, you
 	  will be asked for your specific device in the following questions.
 
-config ATP
-	tristate "AT-LAN-TEC/RealTek pocket adapter support"
-	depends on NET_POCKET && PARPORT && X86
-	select CRC32
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>, if you
-	  want to use this.  If you intend to use this driver, you should have
-	  said N to the "Parallel printer support", because the two drivers
-	  don't like each other.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called atp.
-
 config DE600
 	tristate "D-Link DE600 pocket adapter support"
 	depends on NET_POCKET && PARPORT
@@ -1006,18 +912,6 @@ config YELLOWFIN
 	  To compile this driver as a module, choose M here: the module
 	  will be called yellowfin.  This is recommended.
 
-config R8169
-	tristate "Realtek 8169 gigabit ethernet support"
-	depends on PCI
-	select FW_LOADER
-	select CRC32
-	select MII
-	---help---
-	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called r8169.  This is recommended.
-
 config SIS190
 	tristate "SiS190/SiS191 gigabit ethernet support"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0b341dc..d142fc5 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -112,12 +112,8 @@ obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_SGISEEQ) += sgiseeq.o
 obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
 obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_8139CP) += 8139cp.o
-obj-$(CONFIG_8139TOO) += 8139too.o
 obj-$(CONFIG_CPMAC) += cpmac.o
 obj-$(CONFIG_EWRK3) += ewrk3.o
-obj-$(CONFIG_ATP) += atp.o
-obj-$(CONFIG_SC92031) += sc92031.o
 
 obj-$(CONFIG_ETH16I) += eth16i.o
 obj-$(CONFIG_EQUALIZER) += eql.o
@@ -128,7 +124,6 @@ obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DL2K) += dl2k.o
-obj-$(CONFIG_R8169) += r8169.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 110071e..fecac79 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -32,6 +32,7 @@ source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"
+source "drivers/net/ethernet/realtek/Kconfig"
 source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/stmicro/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 4a6edf7..0092c30 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
 obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
+obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
 obj-$(CONFIG_SFC) += sfc/
 obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
 obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
diff --git a/drivers/net/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
similarity index 100%
rename from drivers/net/8139cp.c
rename to drivers/net/ethernet/realtek/8139cp.c
diff --git a/drivers/net/8139too.c b/drivers/net/ethernet/realtek/8139too.c
similarity index 100%
rename from drivers/net/8139too.c
rename to drivers/net/ethernet/realtek/8139too.c
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
new file mode 100644
index 0000000..a5f67a09
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -0,0 +1,126 @@
+#
+# Realtek device configuration
+#
+
+config NET_VENDOR_REALTEK
+	bool "Realtek devices"
+	depends on PCI || (PARPORT && X86)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Realtek devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_REALTEK
+
+config ATP
+	tristate "AT-LAN-TEC/RealTek pocket adapter support"
+	depends on PARPORT && X86
+	select CRC32
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>, if you
+	  want to use this.  If you intend to use this driver, you should have
+	  said N to the "Parallel printer support", because the two drivers
+	  don't like each other.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called atp.
+
+config 8139CP
+	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL8139C+ chips. If you have one of those, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139cp.  This is recommended.
+
+config 8139TOO
+	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139too.  This is recommended.
+
+config 8139TOO_PIO
+	bool "Use PIO instead of MMIO"
+	default y
+	depends on 8139TOO
+	---help---
+	  This instructs the driver to use programmed I/O ports (PIO) instead
+	  of PCI shared memory (MMIO).  This can possibly solve some problems
+	  in case your mainboard has memory consistency issues.  If unsure,
+	  say N.
+
+config 8139TOO_TUNE_TWISTER
+	bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
+	depends on 8139TOO
+	---help---
+	  This implements a function which might come in handy in case you
+	  are using low quality on long cabling. It is required for RealTek
+	  RTL-8139 revision K boards, and totally unused otherwise.  It tries
+	  to match the transceiver to the cable characteristics. This is
+	  experimental since hardly documented by the manufacturer.
+	  If unsure, say Y.
+
+config 8139TOO_8129
+	bool "Support for older RTL-8129/8130 boards"
+	depends on 8139TOO
+	---help---
+	  This enables support for the older and uncommon RTL-8129 and
+	  RTL-8130 chips, which support MII via an external transceiver,
+	  instead of an internal one.  Disabling this option will save some
+	  memory by making the code size smaller.  If unsure, say Y.
+
+config 8139_OLD_RX_RESET
+	bool "Use older RX-reset method"
+	depends on 8139TOO
+	---help---
+	  The 8139too driver was recently updated to contain a more rapid
+	  reset sequence, in the face of severe receive errors.  This "new"
+	  RX-reset method should be adequate for all boards.  But if you
+	  experience problems, you can enable this option to restore the
+	  old RX-reset behavior.  If unsure, say N.
+
+config R8169
+	tristate "Realtek 8169 gigabit ethernet support"
+	depends on PCI
+	select FW_LOADER
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called r8169.  This is recommended.
+
+config SC92031
+	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+	  have one of these, say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sc92031.  This is recommended.
+
+endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
new file mode 100644
index 0000000..e48cfb6
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Realtek network device drivers.
+#
+
+obj-$(CONFIG_8139CP) += 8139cp.o
+obj-$(CONFIG_8139TOO) += 8139too.o
+obj-$(CONFIG_ATP) += atp.o
+obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/atp.c b/drivers/net/ethernet/realtek/atp.c
similarity index 100%
rename from drivers/net/atp.c
rename to drivers/net/ethernet/realtek/atp.c
diff --git a/drivers/net/atp.h b/drivers/net/ethernet/realtek/atp.h
similarity index 100%
rename from drivers/net/atp.h
rename to drivers/net/ethernet/realtek/atp.h
diff --git a/drivers/net/r8169.c b/drivers/net/ethernet/realtek/r8169.c
similarity index 100%
rename from drivers/net/r8169.c
rename to drivers/net/ethernet/realtek/r8169.c
diff --git a/drivers/net/sc92031.c b/drivers/net/ethernet/realtek/sc92031.c
similarity index 100%
rename from drivers/net/sc92031.c
rename to drivers/net/ethernet/realtek/sc92031.c
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [net-next 09/10] de6*/dl2k/sundance: Move the D-Link drivers
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
                   ` (7 preceding siblings ...)
  2011-08-11 23:39 ` [net-next 08/10] 8139*/atp/r8169/sc92031: Move the Realtek drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-11 23:39 ` [net-next 10/10] atl*: Move the Atheros drivers Jeff Kirsher
  2011-08-12  0:54 ` [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) David Miller
  10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem
  Cc: Jeff Kirsher, netdev, gospo, sassmann, Bjorn Ekwall,
	Donald Becker, Edward Peng

Move the D-Link drivers into drivers/net/ethernet/dlink/ and
make the necessary Kconfig and Makefile changes.

CC: Bjorn Ekwall <bj0rn@blox.se>
CC: Donald Becker <becker@scyld.com>
CC: Edward Peng <edward_peng@dlink.com.tw>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/Kconfig                         |   64 --------------------
 drivers/net/Makefile                        |    4 -
 drivers/net/ethernet/Kconfig                |    1 +
 drivers/net/ethernet/Makefile               |    1 +
 drivers/net/ethernet/dlink/Kconfig          |   84 +++++++++++++++++++++++++++
 drivers/net/ethernet/dlink/Makefile         |    8 +++
 drivers/net/{ => ethernet/dlink}/de600.c    |    0
 drivers/net/{ => ethernet/dlink}/de600.h    |    0
 drivers/net/{ => ethernet/dlink}/de620.c    |    0
 drivers/net/{ => ethernet/dlink}/de620.h    |    0
 drivers/net/{ => ethernet/dlink}/dl2k.c     |    0
 drivers/net/{ => ethernet/dlink}/dl2k.h     |    0
 drivers/net/{ => ethernet/dlink}/sundance.c |    0
 13 files changed, 94 insertions(+), 68 deletions(-)
 create mode 100644 drivers/net/ethernet/dlink/Kconfig
 create mode 100644 drivers/net/ethernet/dlink/Makefile
 rename drivers/net/{ => ethernet/dlink}/de600.c (100%)
 rename drivers/net/{ => ethernet/dlink}/de600.h (100%)
 rename drivers/net/{ => ethernet/dlink}/de620.c (100%)
 rename drivers/net/{ => ethernet/dlink}/de620.h (100%)
 rename drivers/net/{ => ethernet/dlink}/dl2k.c (100%)
 rename drivers/net/{ => ethernet/dlink}/dl2k.h (100%)
 rename drivers/net/{ => ethernet/dlink}/sundance.c (100%)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 42408d7..8799caf 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -623,26 +623,6 @@ config SIS900
 	  To compile this driver as a module, choose M here: the module
 	  will be called sis900.  This is recommended.
 
-config SUNDANCE
-	tristate "Sundance Alta support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  This driver is for the Sundance "Alta" chip.
-	  More specific information and updates are available from
-	  <http://www.scyld.com/network/sundance.html>.
-
-config SUNDANCE_MMIO
-	bool "Use MMIO instead of PIO"
-	depends on SUNDANCE
-	help
-	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
-	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
-	  is known to solve bugs on certain chips.
-
-	  If unsure, say N.
-
 config TLAN
 	tristate "TI ThunderLAN support"
 	depends on NET_PCI && (PCI || EISA)
@@ -740,36 +720,6 @@ config NET_POCKET
 	  the questions about this class of network devices. If you say Y, you
 	  will be asked for your specific device in the following questions.
 
-config DE600
-	tristate "D-Link DE600 pocket adapter support"
-	depends on NET_POCKET && PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de600.
-
-config DE620
-	tristate "D-Link DE620 pocket adapter support"
-	depends on NET_POCKET && PARPORT
-	---help---
-	  This is a network (Ethernet) device which attaches to your parallel
-	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-	  Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, if you want to use
-	  this. It is possible to have several devices share a single parallel
-	  port and it is safe to compile the corresponding drivers into the
-	  kernel.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called de620.
-
 config SGISEEQ
 	tristate "SGI Seeq ethernet controller support"
 	depends on SGI_HAS_SEEQ
@@ -862,20 +812,6 @@ menuconfig NETDEV_1000
 
 if NETDEV_1000
 
-config DL2K
-	tristate "DL2000/TC902x-based Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	help
-	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
-	  which includes
-	  D-Link DGE-550T Gigabit Ethernet Adapter.
-	  D-Link DL2000-based Gigabit Ethernet Adapter.
-	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dl2k.
-
 config IP1000
 	tristate "IP1000 Gigabit Ethernet support"
 	depends on PCI && EXPERIMENTAL
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d142fc5..ecd8c9f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -67,7 +67,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
 # end link order section
 #
 
-obj-$(CONFIG_SUNDANCE) += sundance.o
 obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_SEEQ8005) += seeq8005.o
@@ -106,8 +105,6 @@ obj-$(CONFIG_DUMMY) += dummy.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
 obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_SGISEEQ) += sgiseeq.o
 obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
@@ -123,7 +120,6 @@ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index fecac79..8007e20 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -18,6 +18,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
 source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/dlink/Kconfig"
 source "drivers/net/ethernet/emulex/Kconfig"
 source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/faraday/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 0092c30..22ef380 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
 obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
 obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
 obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
 obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
new file mode 100644
index 0000000..9fdb66b
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -0,0 +1,84 @@
+#
+# D-Link device configuration
+#
+
+config NET_VENDOR_DLINK
+	bool "D-Link devices"
+	depends on PCI || PARPORT
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about D-Link devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_DLINK
+
+config DE600
+	tristate "D-Link DE600 pocket adapter support"
+	depends on PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de600.
+
+config DE620
+	tristate "D-Link DE620 pocket adapter support"
+	depends on PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de620.
+
+config DL2K
+	tristate "DL2000/TC902x-based Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+	  which includes
+	  D-Link DGE-550T Gigabit Ethernet Adapter.
+	  D-Link DL2000-based Gigabit Ethernet Adapter.
+	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dl2k.
+
+config SUNDANCE
+	tristate "Sundance Alta support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver is for the Sundance "Alta" chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/sundance.html>.
+
+config SUNDANCE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on SUNDANCE
+	---help---
+	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
+	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
+	  is known to solve bugs on certain chips.
+
+	  If unsure, say N.
+
+endif # NET_VENDOR_DLINK
diff --git a/drivers/net/ethernet/dlink/Makefile b/drivers/net/ethernet/dlink/Makefile
new file mode 100644
index 0000000..c705eaa
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the D-Link network device drivers.
+#
+
+obj-$(CONFIG_DE600) += de600.o
+obj-$(CONFIG_DE620) += de620.o
+obj-$(CONFIG_DL2K) += dl2k.o
+obj-$(CONFIG_SUNDANCE) += sundance.o
diff --git a/drivers/net/de600.c b/drivers/net/ethernet/dlink/de600.c
similarity index 100%
rename from drivers/net/de600.c
rename to drivers/net/ethernet/dlink/de600.c
diff --git a/drivers/net/de600.h b/drivers/net/ethernet/dlink/de600.h
similarity index 100%
rename from drivers/net/de600.h
rename to drivers/net/ethernet/dlink/de600.h
diff --git a/drivers/net/de620.c b/drivers/net/ethernet/dlink/de620.c
similarity index 100%
rename from drivers/net/de620.c
rename to drivers/net/ethernet/dlink/de620.c
diff --git a/drivers/net/de620.h b/drivers/net/ethernet/dlink/de620.h
similarity index 100%
rename from drivers/net/de620.h
rename to drivers/net/ethernet/dlink/de620.h
diff --git a/drivers/net/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
similarity index 100%
rename from drivers/net/dl2k.c
rename to drivers/net/ethernet/dlink/dl2k.c
diff --git a/drivers/net/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
similarity index 100%
rename from drivers/net/dl2k.h
rename to drivers/net/ethernet/dlink/dl2k.h
diff --git a/drivers/net/sundance.c b/drivers/net/ethernet/dlink/sundance.c
similarity index 100%
rename from drivers/net/sundance.c
rename to drivers/net/ethernet/dlink/sundance.c
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [net-next 10/10] atl*: Move the Atheros drivers
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
                   ` (8 preceding siblings ...)
  2011-08-11 23:39 ` [net-next 09/10] de6*/dl2k/sundance: Move the D-Link drivers Jeff Kirsher
@ 2011-08-11 23:39 ` Jeff Kirsher
  2011-08-12  0:54 ` [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) David Miller
  10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-11 23:39 UTC (permalink / raw)
  To: davem
  Cc: Jeff Kirsher, netdev, gospo, sassmann, Jay Cliburn, Chris Snook,
	Jie Yang

Move the Atheros drivers into drivers/net/ethernet/atheros/ and
make the necessary Kconfig and Makefile changes.

CC: Jay Cliburn <jcliburn@gmail.com>
CC: Chris Snook <chris.snook@gmail.com>
CC: Jie Yang <jie.yang@atheros.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 MAINTAINERS                                        |    2 +-
 drivers/net/Kconfig                                |   45 --------------
 drivers/net/Makefile                               |    4 -
 drivers/net/ethernet/Kconfig                       |    1 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/atheros/Kconfig               |   65 ++++++++++++++++++++
 drivers/net/ethernet/atheros/Makefile              |    8 +++
 drivers/net/{ => ethernet/atheros}/atl1c/Makefile  |    0
 drivers/net/{ => ethernet/atheros}/atl1c/atl1c.h   |    0
 .../{ => ethernet/atheros}/atl1c/atl1c_ethtool.c   |    0
 .../net/{ => ethernet/atheros}/atl1c/atl1c_hw.c    |    0
 .../net/{ => ethernet/atheros}/atl1c/atl1c_hw.h    |    0
 .../net/{ => ethernet/atheros}/atl1c/atl1c_main.c  |    0
 drivers/net/{ => ethernet/atheros}/atl1e/Makefile  |    0
 drivers/net/{ => ethernet/atheros}/atl1e/atl1e.h   |    0
 .../{ => ethernet/atheros}/atl1e/atl1e_ethtool.c   |    0
 .../net/{ => ethernet/atheros}/atl1e/atl1e_hw.c    |    0
 .../net/{ => ethernet/atheros}/atl1e/atl1e_hw.h    |    0
 .../net/{ => ethernet/atheros}/atl1e/atl1e_main.c  |    0
 .../net/{ => ethernet/atheros}/atl1e/atl1e_param.c |    0
 drivers/net/{ => ethernet/atheros}/atlx/Makefile   |    0
 drivers/net/{ => ethernet/atheros}/atlx/atl1.c     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atl1.h     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atl2.c     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atl2.h     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atlx.c     |    0
 drivers/net/{ => ethernet/atheros}/atlx/atlx.h     |    0
 27 files changed, 76 insertions(+), 50 deletions(-)
 create mode 100644 drivers/net/ethernet/atheros/Kconfig
 create mode 100644 drivers/net/ethernet/atheros/Makefile
 rename drivers/net/{ => ethernet/atheros}/atl1c/Makefile (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_ethtool.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_hw.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_hw.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1c/atl1c_main.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/Makefile (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_ethtool.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_hw.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_hw.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_main.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atl1e/atl1e_param.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/Makefile (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atl1.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atl1.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atl2.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atl2.h (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atlx.c (100%)
 rename drivers/net/{ => ethernet/atheros}/atlx/atlx.h (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 88ff9ef..26fa497 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1282,7 +1282,7 @@ L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
 S:	Maintained
-F:	drivers/net/atlx/
+F:	drivers/net/ethernet/atheros/
 
 ATM
 M:	Chas Williams <chas@cmf.nrl.navy.mil>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8799caf..e6be7123 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -760,17 +760,6 @@ config FEC_MPC52xx_MDIO
 	  If not sure, enable.
 	  If compiled as module, it will be called fec_mpc52xx_phy.
 
-config ATL2
-	tristate "Atheros L2 Fast Ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros L2 fast ethernet adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl2.
-
 config XILINX_EMACLITE
 	tristate "Xilinx 10/100 Ethernet Lite support"
 	depends on PPC32 || MICROBLAZE
@@ -1031,40 +1020,6 @@ config XILINX_LL_TEMAC
 	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
 	  core used in Xilinx Spartan and Virtex FPGAs
 
-config ATL1
-	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros/Attansic L1 gigabit ethernet
-	  adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl1.
-
-config ATL1E
-	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros L1E gigabit ethernet adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl1e.
-
-config ATL1C
-	tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select CRC32
-	select MII
-	help
-	  This driver supports the Atheros L1C gigabit ethernet adapter.
-
-	  To compile this driver as a module, choose M here.  The module
-	  will be called atl1c.
-
 config JME
 	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ecd8c9f..d151075 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,10 +13,6 @@ obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
 obj-$(CONFIG_IP1000) += ipg.o
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_ATL1) += atlx/
-obj-$(CONFIG_ATL2) += atlx/
-obj-$(CONFIG_ATL1E) += atl1e/
-obj-$(CONFIG_ATL1C) += atl1c/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
 obj-$(CONFIG_JME) += jme.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 8007e20..9410f20 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -14,6 +14,7 @@ if ETHERNET
 source "drivers/net/ethernet/3com/Kconfig"
 source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/apple/Kconfig"
+source "drivers/net/ethernet/atheros/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 22ef380..5d89fd9 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
 obj-$(CONFIG_NET_VENDOR_8390) += 8390/
 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
+obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig
new file mode 100644
index 0000000..966c6c7
--- /dev/null
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -0,0 +1,65 @@
+#
+# Atheros device configuration
+#
+
+config NET_VENDOR_ATHEROS
+	bool "Atheros devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Atheros devices. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_ATHEROS
+
+config ATL2
+	tristate "Atheros L2 Fast Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the Atheros L2 fast ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl2.
+
+config ATL1
+	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the Atheros/Attansic L1 gigabit ethernet
+	  adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1.
+
+config ATL1E
+	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the Atheros L1E gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1e.
+
+config ATL1C
+	tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the Atheros L1C gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1c.
+
+endif # NET_VENDOR_ATHEROS
diff --git a/drivers/net/ethernet/atheros/Makefile b/drivers/net/ethernet/atheros/Makefile
new file mode 100644
index 0000000..e7e76fb
--- /dev/null
+++ b/drivers/net/ethernet/atheros/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Atheros network device drivers.
+#
+
+obj-$(CONFIG_ATL1) += atlx/
+obj-$(CONFIG_ATL2) += atlx/
+obj-$(CONFIG_ATL1E) += atl1e/
+obj-$(CONFIG_ATL1C) += atl1c/
diff --git a/drivers/net/atl1c/Makefile b/drivers/net/ethernet/atheros/atl1c/Makefile
similarity index 100%
rename from drivers/net/atl1c/Makefile
rename to drivers/net/ethernet/atheros/atl1c/Makefile
diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/ethernet/atheros/atl1c/atl1c.h
similarity index 100%
rename from drivers/net/atl1c/atl1c.h
rename to drivers/net/ethernet/atheros/atl1c/atl1c.h
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c
similarity index 100%
rename from drivers/net/atl1c/atl1c_ethtool.c
rename to drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c
diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
similarity index 100%
rename from drivers/net/atl1c/atl1c_hw.c
rename to drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
similarity index 100%
rename from drivers/net/atl1c/atl1c_hw.h
rename to drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
similarity index 100%
rename from drivers/net/atl1c/atl1c_main.c
rename to drivers/net/ethernet/atheros/atl1c/atl1c_main.c
diff --git a/drivers/net/atl1e/Makefile b/drivers/net/ethernet/atheros/atl1e/Makefile
similarity index 100%
rename from drivers/net/atl1e/Makefile
rename to drivers/net/ethernet/atheros/atl1e/Makefile
diff --git a/drivers/net/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h
similarity index 100%
rename from drivers/net/atl1e/atl1e.h
rename to drivers/net/ethernet/atheros/atl1e/atl1e.h
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c
similarity index 100%
rename from drivers/net/atl1e/atl1e_ethtool.c
rename to drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c
diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
similarity index 100%
rename from drivers/net/atl1e/atl1e_hw.c
rename to drivers/net/ethernet/atheros/atl1e/atl1e_hw.c
diff --git a/drivers/net/atl1e/atl1e_hw.h b/drivers/net/ethernet/atheros/atl1e/atl1e_hw.h
similarity index 100%
rename from drivers/net/atl1e/atl1e_hw.h
rename to drivers/net/ethernet/atheros/atl1e/atl1e_hw.h
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
similarity index 100%
rename from drivers/net/atl1e/atl1e_main.c
rename to drivers/net/ethernet/atheros/atl1e/atl1e_main.c
diff --git a/drivers/net/atl1e/atl1e_param.c b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c
similarity index 100%
rename from drivers/net/atl1e/atl1e_param.c
rename to drivers/net/ethernet/atheros/atl1e/atl1e_param.c
diff --git a/drivers/net/atlx/Makefile b/drivers/net/ethernet/atheros/atlx/Makefile
similarity index 100%
rename from drivers/net/atlx/Makefile
rename to drivers/net/ethernet/atheros/atlx/Makefile
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
similarity index 100%
rename from drivers/net/atlx/atl1.c
rename to drivers/net/ethernet/atheros/atlx/atl1.c
diff --git a/drivers/net/atlx/atl1.h b/drivers/net/ethernet/atheros/atlx/atl1.h
similarity index 100%
rename from drivers/net/atlx/atl1.h
rename to drivers/net/ethernet/atheros/atlx/atl1.h
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
similarity index 100%
rename from drivers/net/atlx/atl2.c
rename to drivers/net/ethernet/atheros/atlx/atl2.c
diff --git a/drivers/net/atlx/atl2.h b/drivers/net/ethernet/atheros/atlx/atl2.h
similarity index 100%
rename from drivers/net/atlx/atl2.h
rename to drivers/net/ethernet/atheros/atlx/atl2.h
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/ethernet/atheros/atlx/atlx.c
similarity index 100%
rename from drivers/net/atlx/atlx.c
rename to drivers/net/ethernet/atheros/atlx/atlx.c
diff --git a/drivers/net/atlx/atlx.h b/drivers/net/ethernet/atheros/atlx/atlx.h
similarity index 100%
rename from drivers/net/atlx/atlx.h
rename to drivers/net/ethernet/atheros/atlx/atlx.h
-- 
1.7.6


^ permalink raw reply related	[flat|nested] 13+ messages in thread
* Re: [net-next 00/10] drivers/net organize Ethernet drivers (3rd series)
  2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
                   ` (9 preceding siblings ...)
  2011-08-11 23:39 ` [net-next 10/10] atl*: Move the Atheros drivers Jeff Kirsher
@ 2011-08-12  0:54 ` David Miller
  10 siblings, 0 replies; 13+ messages in thread
From: David Miller @ 2011-08-12  0:54 UTC (permalink / raw)
  To: jeffrey.t.kirsher; +Cc: netdev, gospo, sassmann

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 11 Aug 2011 16:39:48 -0700

> This is the third of seven 10 patch series to move the Ethernet
> drivers into drivers/net/ethernet/
> 
> The following are changes since commit e7c379d2a0dcb8c30cb580184a0df11805464703:
>   rtnetlink: remove initialization of dev->real_num_tx_queues
> and are available in the git repository at:
>   master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize master

Pulled, thanks Jeff.

^ permalink raw reply	[flat|nested] 13+ messages in thread
* Re: [net-next 06/10] xscale: Move the Intel XScale IXP drivers
  2011-08-11 23:39 ` [net-next 06/10] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
@ 2011-08-14 20:25   ` Krzysztof Halasa
  0 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Halasa @ 2011-08-14 20:25 UTC (permalink / raw)
  To: Jeff Kirsher; +Cc: davem, netdev, gospo, sassmann, Lennert Buytenhek

Jeff Kirsher <jeffrey.t.kirsher@intel.com> writes:

> Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
> and make the necessary Kconfig and Makefile changes.

>  rename drivers/net/{arm => ethernet/xscale}/ixp4xx_eth.c (100%)

To be honest I don't care if the driver is in the old or new dir.

If this changes anything:

Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
-- 
Krzysztof Halasa

^ permalink raw reply	[flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-08-14 20:25 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-11 23:39 [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) Jeff Kirsher
2011-08-11 23:39 ` [net-next 01/10] pasemic_mac*: Move the PA Semi driver Jeff Kirsher
2011-08-11 23:39 ` [net-next 02/10] tehuti: Move the Tehuti driver Jeff Kirsher
2011-08-11 23:39 ` [net-next 03/10] stmmac: Move the STMicroelectronics driver Jeff Kirsher
2011-08-11 23:39 ` [net-next 04/10] bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 05/10] *sonic/natsemi/ns83829: Move the National Semi-conductor drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 06/10] xscale: Move the Intel XScale IXP drivers Jeff Kirsher
2011-08-14 20:25   ` Krzysztof Halasa
2011-08-11 23:39 ` [net-next 07/10] ftgmac100/ftmac100: Move the Faraday drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 08/10] 8139*/atp/r8169/sc92031: Move the Realtek drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 09/10] de6*/dl2k/sundance: Move the D-Link drivers Jeff Kirsher
2011-08-11 23:39 ` [net-next 10/10] atl*: Move the Atheros drivers Jeff Kirsher
2011-08-12  0:54 ` [net-next 00/10] drivers/net organize Ethernet drivers (3rd series) David Miller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).