[PATCH net-next v3 1/1] net: fec: Fix RMON registers on imx6

[Jim Baxter <jim_baxter@mentor.com>]

commit 38ae92d "fec: Add support for reading
RMON registers" causes the imx6Q to crash.

This fixes it by only enabling the RMON registers, the
registers are already cleared by the MAC being reset.

Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
---
Change v1 to v2
Removed per processor change and just set bit 31 to 0.
Change v2 to v3
Fixed comment to describe operation correctly.

 drivers/net/ethernet/freescale/fec_main.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index ed6180e..68834c3 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -605,11 +605,8 @@ fec_restart(struct net_device *ndev, int duplex)
 		ecntl |= (1 << 4);
 
 #ifndef CONFIG_M5272
-	/* Disable, clear, and enable the MIB */
-	writel(1 << 31, fep->hwp + FEC_MIB_CTRLSTAT);
-	for (i = RMON_T_DROP; i < IEEE_R_OCTETS_OK; i++)
-		writel(0, fep->hwp + i);
-	writel(0, fep->hwp + FEC_MIB_CTRLSTAT);
+	/* Enable the MIB statistic event counters */
+	writel(0 << 31, fep->hwp + FEC_MIB_CTRLSTAT);
 #endif
 
 	/* And last, enable the transmit and receive processing */
-- 
1.7.10.4