[PATCH net-next 1/4] net: ethernet: validate pause autoneg setting

From: Doug Berger <opendmb@gmail.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	bcm-kernel-feedback-list@broadcom.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, Doug Berger <opendmb@gmail.com>
Subject: [PATCH net-next 1/4] net: ethernet: validate pause autoneg setting
Date: Mon, 11 May 2020 17:24:07 -0700	[thread overview]
Message-ID: <1589243050-18217-2-git-send-email-opendmb@gmail.com> (raw)
In-Reply-To: <1589243050-18217-1-git-send-email-opendmb@gmail.com>

A comment in uapi/linux/ethtool.h states "Drivers should reject a
non-zero setting of @autoneg when autoneogotiation is disabled (or
not supported) for the link".

That check should be added to phy_validate_pause() to consolidate
the code where possible.

Fixes: 22b7d29926b5 ("net: ethernet: Add helper to determine if pause configuration is supported")
Signed-off-by: Doug Berger <opendmb@gmail.com>
---
 drivers/net/phy/phy_device.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index c3a107cf578e..5a9618ba232e 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2624,6 +2624,9 @@ EXPORT_SYMBOL(phy_set_asym_pause);
 bool phy_validate_pause(struct phy_device *phydev,
 			struct ethtool_pauseparam *pp)
 {
+	if (pp->autoneg && !phydev->autoneg)
+		return false;
+
 	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
 			       phydev->supported) && pp->rx_pause)
 		return false;
-- 
2.7.4

