[PATCH AUTOSEL 5.2 001/249] ath10k: Check tx_stats before use it

[PATCH AUTOSEL 5.2 001/249] ath10k: Check tx_stats before use it

[Sasha Levin]

From: Yingying Tang <yintang@codeaurora.org>

[ Upstream commit 9e7251fa38978b85108c44743e1436d48e8d0d76 ]

tx_stats will be freed and set to NULL before debugfs_sta node is
removed in station disconnetion process. So if read the debugfs_sta
node there may be NULL pointer error. Add check for tx_stats before
use it to resove this issue.

Signed-off-by: Yingying Tang <yintang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index c704ae371c4d..42931a669b02 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -663,6 +663,13 @@ static ssize_t ath10k_dbg_sta_dump_tx_stats(struct file *file,
 
 	mutex_lock(&ar->conf_mutex);
 
+	if (!arsta->tx_stats) {
+		ath10k_warn(ar, "failed to get tx stats");
+		mutex_unlock(&ar->conf_mutex);
+		kfree(buf);
+		return 0;
+	}
+
 	spin_lock_bh(&ar->data_lock);
 	for (k = 0; k < ATH10K_STATS_TYPE_MAX; k++) {
 		for (j = 0; j < ATH10K_COUNTER_TYPE_MAX; j++) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 002/249] ath10k: htt: don't use txdone_fifo with SDIO

[Sasha Levin]

From: Alagu Sankar <alagusankar@silex-india.com>

[ Upstream commit e2a6b711282a371c5153239e0468a48254f17ca6 ]

HTT High Latency (ATH10K_DEV_TYPE_HL) does not use txdone_fifo at all, we don't
even initialise it by skipping ath10k_htt_tx_alloc_buf() in
ath10k_htt_tx_start(). Because of this using QCA6174 SDIO
ath10k_htt_rx_tx_compl_ind() will crash when it accesses unitialised
txdone_fifo. So skip txdone_fifo when using High Latency mode.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Co-developed-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 1acc622d2183..f22840bbc389 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2277,7 +2277,9 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
 		 *  Note that with only one concurrent reader and one concurrent
 		 *  writer, you don't need extra locking to use these macro.
 		 */
-		if (!kfifo_put(&htt->txdone_fifo, tx_done)) {
+		if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
+			ath10k_txrx_tx_unref(htt, &tx_done);
+		} else if (!kfifo_put(&htt->txdone_fifo, tx_done)) {
 			ath10k_warn(ar, "txdone fifo overrun, msdu_id %d status %d\n",
 				    tx_done.msdu_id, tx_done.status);
 			ath10k_txrx_tx_unref(htt, &tx_done);
-- 
2.20.1

[PATCH AUTOSEL 5.2 003/249] ath10k: fix incorrect multicast/broadcast rate setting

[Sasha Levin]

From: Pradeep kumar Chitrapu <pradeepc@codeaurora.org>

[ Upstream commit 93ee3d108fc77e19efeac3ec5aa7d5886711bfef ]

Invalid rate code is sent to firmware when multicast rate value of 0 is
sent to driver indicating disabled case, causing broken mesh path.
so fix that.

Tested on QCA9984 with firmware 10.4-3.6.1-00827

Sven tested on IPQ4019 with 10.4-3.5.3-00057 and QCA9888 with 10.4-3.5.3-00053
(ath10k-firmware) and 10.4-3.6-00140 (linux-firmware 2018-12-16-211de167).

Fixes: cd93b83ad92 ("ath10k: support for multicast rate control")
Co-developed-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Tested-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9c703d287333..e8997e22ceec 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5588,8 +5588,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 	struct cfg80211_chan_def def;
 	u32 vdev_param, pdev_param, slottime, preamble;
 	u16 bitrate, hw_value;
-	u8 rate, basic_rate_idx;
-	int rateidx, ret = 0, hw_rate_code;
+	u8 rate, basic_rate_idx, rateidx;
+	int ret = 0, hw_rate_code, mcast_rate;
 	enum nl80211_band band;
 	const struct ieee80211_supported_band *sband;
 
@@ -5776,7 +5776,11 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_MCAST_RATE &&
 	    !ath10k_mac_vif_chan(arvif->vif, &def)) {
 		band = def.chan->band;
-		rateidx = vif->bss_conf.mcast_rate[band] - 1;
+		mcast_rate = vif->bss_conf.mcast_rate[band];
+		if (mcast_rate > 0)
+			rateidx = mcast_rate - 1;
+		else
+			rateidx = ffs(vif->bss_conf.basic_rates) - 1;
 
 		if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
 			rateidx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
-- 
2.20.1

[PATCH AUTOSEL 5.2 004/249] ath9k: Don't trust TX status TID number when reporting airtime

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 389b72e58259336c2d56d58b660b79cf4b9e0dcb ]

As already noted a comment in ath_tx_complete_aggr(), the hardware will
occasionally send a TX status with the wrong tid number. If we trust the
value, airtime usage will be reported to the wrong AC, which can cause the
deficit on that AC to become very low, blocking subsequent attempts to
transmit.

To fix this, account airtime usage to the TID number from the original skb,
instead of the one in the hardware TX status report.

Reported-by: Miguel Catalan Cid <miguel.catalan@i2cat.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b17e1ca40995..3be0aeedb9b5 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -668,7 +668,8 @@ static bool bf_is_ampdu_not_probing(struct ath_buf *bf)
 static void ath_tx_count_airtime(struct ath_softc *sc,
 				 struct ieee80211_sta *sta,
 				 struct ath_buf *bf,
-				 struct ath_tx_status *ts)
+				 struct ath_tx_status *ts,
+				 u8 tid)
 {
 	u32 airtime = 0;
 	int i;
@@ -679,7 +680,7 @@ static void ath_tx_count_airtime(struct ath_softc *sc,
 		airtime += rate_dur * bf->rates[i].count;
 	}
 
-	ieee80211_sta_register_airtime(sta, ts->tid, airtime, 0);
+	ieee80211_sta_register_airtime(sta, tid, airtime, 0);
 }
 
 static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
@@ -709,7 +710,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
 	if (sta) {
 		struct ath_node *an = (struct ath_node *)sta->drv_priv;
 		tid = ath_get_skb_tid(sc, an, bf->bf_mpdu);
-		ath_tx_count_airtime(sc, sta, bf, ts);
+		ath_tx_count_airtime(sc, sta, bf, ts, tid->tidno);
 		if (ts->ts_status & (ATH9K_TXERR_FILT | ATH9K_TXERR_XRETRY))
 			tid->clear_ps_filter = true;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 005/249] wil6210: fix potential out-of-bounds read

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit bfabdd6997323adbedccb13a3fed1967fb8cf8f5 ]

Notice that *rc* can evaluate to up to 5, include/linux/netdevice.h:

enum gro_result {
        GRO_MERGED,
        GRO_MERGED_FREE,
        GRO_HELD,
        GRO_NORMAL,
        GRO_DROP,
        GRO_CONSUMED,
};
typedef enum gro_result gro_result_t;

In case *rc* evaluates to 5, we end up having an out-of-bounds read
at drivers/net/wireless/ath/wil6210/txrx.c:821:

	wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
		     len, gro_res_str[rc]);

Fix this by adding element "GRO_CONSUMED" to array gro_res_str.

Addresses-Coverity-ID: 1444666 ("Out-of-bounds read")
Fixes: 194b482b5055 ("wil6210: Debug print GRO Rx result")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 4ccfd1404458..d74837cce67f 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -750,6 +750,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 		[GRO_HELD]		= "GRO_HELD",
 		[GRO_NORMAL]		= "GRO_NORMAL",
 		[GRO_DROP]		= "GRO_DROP",
+		[GRO_CONSUMED]		= "GRO_CONSUMED",
 	};
 
 	wil->txrx_ops.get_netif_rx_params(skb, &cid, &security);
-- 
2.20.1

[PATCH AUTOSEL 5.2 006/249] ath10k: Do not send probe response template for mesh

[Sasha Levin]

From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ]

Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.

To avoid this failure, skip sending probe response template to
firmware for mesh point.

Tested HW: WCN3990/QCA6174/QCA9984

Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e8997e22ceec..b500fd427595 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1630,6 +1630,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
 	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
 		return 0;
 
+	 /* For mesh, probe response and beacon share the same template */
+	if (ieee80211_vif_is_mesh(vif))
+		return 0;
+
 	prb = ieee80211_proberesp_get(hw, vif);
 	if (!prb) {
 		ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
-- 
2.20.1

[PATCH AUTOSEL 5.2 008/249] ath9k: Check for errors when reading SREV register

[Sasha Levin]

From: Tim Schumacher <timschumi@gmx.de>

[ Upstream commit 2f90c7e5d09437a4d8d5546feaae9f1cf48cfbe1 ]

Right now, if an error is encountered during the SREV register
read (i.e. an EIO in ath9k_regread()), that error code gets
passed all the way to __ath9k_hw_init(), where it is visible
during the "Chip rev not supported" message.

    ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
    ath: phy2: Mac Chip Rev 0x0f.3 is not supported by this driver
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath9k_htc: Failed to initialize the device

Check for -EIO explicitly in ath9k_hw_read_revisions() and return
a boolean based on the success of the operation. Check for that in
__ath9k_hw_init() and abort with a more debugging-friendly message
if reading the revisions wasn't successful.

    ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
    ath: phy2: Failed to read SREV register
    ath: phy2: Could not read hardware revision
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath9k_htc: Failed to initialize the device

This helps when debugging by directly showing the first point of
failure and it could prevent possible errors if a 0x0f.3 revision
is ever supported.

Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hw.c | 32 +++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8581d917635a..b6773d613f0c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -252,8 +252,9 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah,
 /* Chip Revisions */
 /******************/
 
-static void ath9k_hw_read_revisions(struct ath_hw *ah)
+static bool ath9k_hw_read_revisions(struct ath_hw *ah)
 {
+	u32 srev;
 	u32 val;
 
 	if (ah->get_mac_revision)
@@ -269,25 +270,33 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
 			val = REG_READ(ah, AR_SREV);
 			ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
 		}
-		return;
+		return true;
 	case AR9300_DEVID_AR9340:
 		ah->hw_version.macVersion = AR_SREV_VERSION_9340;
-		return;
+		return true;
 	case AR9300_DEVID_QCA955X:
 		ah->hw_version.macVersion = AR_SREV_VERSION_9550;
-		return;
+		return true;
 	case AR9300_DEVID_AR953X:
 		ah->hw_version.macVersion = AR_SREV_VERSION_9531;
-		return;
+		return true;
 	case AR9300_DEVID_QCA956X:
 		ah->hw_version.macVersion = AR_SREV_VERSION_9561;
-		return;
+		return true;
 	}
 
-	val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+	srev = REG_READ(ah, AR_SREV);
+
+	if (srev == -EIO) {
+		ath_err(ath9k_hw_common(ah),
+			"Failed to read SREV register");
+		return false;
+	}
+
+	val = srev & AR_SREV_ID;
 
 	if (val == 0xFF) {
-		val = REG_READ(ah, AR_SREV);
+		val = srev;
 		ah->hw_version.macVersion =
 			(val & AR_SREV_VERSION2) >> AR_SREV_TYPE2_S;
 		ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
@@ -306,6 +315,8 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
 		if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE)
 			ah->is_pciexpress = true;
 	}
+
+	return true;
 }
 
 /************************************/
@@ -559,7 +570,10 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 	struct ath_common *common = ath9k_hw_common(ah);
 	int r = 0;
 
-	ath9k_hw_read_revisions(ah);
+	if (!ath9k_hw_read_revisions(ah)) {
+		ath_err(common, "Could not read hardware revisions");
+		return -EOPNOTSUPP;
+	}
 
 	switch (ah->hw_version.macVersion) {
 	case AR_SREV_VERSION_5416_PCI:
-- 
2.20.1

[PATCH AUTOSEL 5.2 009/249] ath10k: Fix the wrong value of enums for wmi tlv stats id

[Sasha Levin]

From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit 9280f4fc06f44d0b4dc9e831f72d97b3d7cd35d3 ]

The enum value for WMI_TLV_STAT_PDEV, WMI_TLV_STAT_VDEV
and WMI_TLV_STAT_PEER is wrong, due to which the vdev stats
are not received from firmware in wmi_update_stats event.

Fix the enum values for above stats to receive all stats
from firmware in WMI_TLV_UPDATE_STATS_EVENTID.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: f40a307eb92c ("ath10k: Fill rx duration for each peer in fw_stats for WCN3990)
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index e1c40bb69932..12f57f9adbba 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4535,9 +4535,10 @@ enum wmi_10_4_stats_id {
 };
 
 enum wmi_tlv_stats_id {
-	WMI_TLV_STAT_PDEV	= BIT(0),
-	WMI_TLV_STAT_VDEV	= BIT(1),
-	WMI_TLV_STAT_PEER	= BIT(2),
+	WMI_TLV_STAT_PEER	= BIT(0),
+	WMI_TLV_STAT_AP		= BIT(1),
+	WMI_TLV_STAT_PDEV	= BIT(2),
+	WMI_TLV_STAT_VDEV	= BIT(3),
 	WMI_TLV_STAT_PEER_EXTD  = BIT(10),
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 010/249] wil6210: fix missed MISC mbox interrupt

[Sasha Levin]

From: Maya Erez <merez@codeaurora.org>

[ Upstream commit 7441be71ba7e07791fd4fa2b07c932dff14ff4d9 ]

When MISC interrupt is triggered due to HALP bit, in parallel
to mbox events handling by the MISC threaded IRQ, new mbox
interrupt can be missed in the following scenario:
1. MISC ICR is read in the IRQ handler
2. Threaded IRQ is completed and all MISC interrupts are unmasked
3. mbox interrupt is set by FW
4. HALP is masked
The mbox interrupt in step 3 can be missed due to constant high level
of ICM.
Masking all MISC IRQs instead of masking only HALP bit in step 4
will guarantee that ICM will drop to 0 and interrupt will be triggered
once MISC interrupts will be unmasked.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/interrupt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 3f5bd177d55f..e41ba24011d8 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -580,7 +580,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
 			/* no need to handle HALP ICRs until next vote */
 			wil->halp.handle_icr = false;
 			wil_dbg_irq(wil, "irq_misc: HALP IRQ invoked\n");
-			wil6210_mask_halp(wil);
+			wil6210_mask_irq_misc(wil, true);
 			complete(&wil->halp.comp);
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 011/249] ath6kl: add some bounds checking

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 5d6751eaff672ea77642e74e92e6c0ac7f9709ab ]

The "ev->traffic_class" and "reply->ac" variables come from the network
and they're used as an offset into the wmi->stream_exist_for_ac[] array.
Those variables are u8 so they can be 0-255 but the stream_exist_for_ac[]
array only has WMM_NUM_AC (4) elements.  We need to add a couple bounds
checks to prevent array overflows.

I also modified one existing check from "if (traffic_class > 3) {" to
"if (traffic_class >= WMM_NUM_AC) {" just to make them all consistent.

Fixes: bdcd81707973 (" Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath6kl/wmi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 68854c45d0a4..9ab6aa9ded5c 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -1176,6 +1176,10 @@ static int ath6kl_wmi_pstream_timeout_event_rx(struct wmi *wmi, u8 *datap,
 		return -EINVAL;
 
 	ev = (struct wmi_pstream_timeout_event *) datap;
+	if (ev->traffic_class >= WMM_NUM_AC) {
+		ath6kl_err("invalid traffic class: %d\n", ev->traffic_class);
+		return -EINVAL;
+	}
 
 	/*
 	 * When the pstream (fat pipe == AC) timesout, it means there were
@@ -1517,6 +1521,10 @@ static int ath6kl_wmi_cac_event_rx(struct wmi *wmi, u8 *datap, int len,
 		return -EINVAL;
 
 	reply = (struct wmi_cac_event *) datap;
+	if (reply->ac >= WMM_NUM_AC) {
+		ath6kl_err("invalid AC: %d\n", reply->ac);
+		return -EINVAL;
+	}
 
 	if ((reply->cac_indication == CAC_INDICATION_ADMISSION_RESP) &&
 	    (reply->status_code != IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED)) {
@@ -2633,7 +2641,7 @@ int ath6kl_wmi_delete_pstream_cmd(struct wmi *wmi, u8 if_idx, u8 traffic_class,
 	u16 active_tsids = 0;
 	int ret;
 
-	if (traffic_class > 3) {
+	if (traffic_class >= WMM_NUM_AC) {
 		ath6kl_err("invalid traffic class: %d\n", traffic_class);
 		return -EINVAL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 012/249] ath10k: add peer id check in ath10k_peer_find_by_id

[Sasha Levin]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit 49ed34b835e231aa941257394716bc689bc98d9f ]

For some SDIO chip, the peer id is 65535 for MPDU with error status,
then test_bit will trigger buffer overflow for peer's memory, if kasan
enabled, it will report error.

Reason is when station is in disconnecting status, firmware do not delete
the peer info since it not disconnected completely, meanwhile some AP will
still send data packet to station, then hardware will receive the packet
and send to firmware, firmware's logic will report peer id of 65535 for
MPDU with error status.

Add check for overflow the size of peer's peer_ids will avoid the buffer
overflow access.

Call trace of kasan:
dump_backtrace+0x0/0x2ec
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0xc8/0xec
print_address_description+0x74/0x240
kasan_report+0x250/0x26c
__asan_report_load8_noabort+0x20/0x2c
ath10k_peer_find_by_id+0x180/0x1e4 [ath10k_core]
ath10k_htt_t2h_msg_handler+0x100c/0x2fd4 [ath10k_core]
ath10k_htt_htc_t2h_msg_handler+0x20/0x34 [ath10k_core]
ath10k_sdio_irq_handler+0xcc8/0x1678 [ath10k_sdio]
process_sdio_pending_irqs+0xec/0x370
sdio_run_irqs+0x68/0xe4
sdio_irq_work+0x1c/0x28
process_one_work+0x3d8/0x8b0
worker_thread+0x508/0x7cc
kthread+0x24c/0x264
ret_from_fork+0x10/0x18

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/txrx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index c5818d28f55a..4102df016931 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -150,6 +150,9 @@ struct ath10k_peer *ath10k_peer_find_by_id(struct ath10k *ar, int peer_id)
 {
 	struct ath10k_peer *peer;
 
+	if (peer_id >= BITS_PER_TYPE(peer->peer_ids))
+		return NULL;
+
 	lockdep_assert_held(&ar->data_lock);
 
 	list_for_each_entry(peer, &ar->peers, list)
-- 
2.20.1

[PATCH AUTOSEL 5.2 014/249] wil6210: fix spurious interrupts in 3-msi

[Sasha Levin]

From: Maya Erez <merez@codeaurora.org>

[ Upstream commit e10b0eddd5235aa5aef4e40b970e34e735611a80 ]

Interrupt is set in ICM (ICR & ~IMV) rising trigger.
As the driver masks the IRQ after clearing it, there can
be a race where an additional spurious interrupt is triggered
when the driver unmask the IRQ.
This can happen in case HW triggers an interrupt after the clear
and before the mask.

To prevent the second spurious interrupt the driver needs to mask the
IRQ before reading and clearing it.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/interrupt.c | 65 ++++++++++++--------
 1 file changed, 40 insertions(+), 25 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index e41ba24011d8..b00a13d6d530 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -296,21 +296,24 @@ void wil_configure_interrupt_moderation(struct wil6210_priv *wil)
 static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_DMA_EP_RX_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
 	bool need_unmask = true;
 
+	wil6210_mask_irq_rx(wil);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_DMA_EP_RX_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
+
 	trace_wil6210_irq_rx(isr);
 	wil_dbg_irq(wil, "ISR RX 0x%08x\n", isr);
 
 	if (unlikely(!isr)) {
 		wil_err_ratelimited(wil, "spurious IRQ: RX\n");
+		wil6210_unmask_irq_rx(wil);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_rx(wil);
-
 	/* RX_DONE and RX_HTRSH interrupts are the same if interrupt
 	 * moderation is not used. Interrupt moderation may cause RX
 	 * buffer overflow while RX_DONE is delayed. The required
@@ -355,21 +358,24 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
 static irqreturn_t wil6210_irq_rx_edma(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_INT_GEN_RX_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
 	bool need_unmask = true;
 
+	wil6210_mask_irq_rx_edma(wil);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_INT_GEN_RX_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
+
 	trace_wil6210_irq_rx(isr);
 	wil_dbg_irq(wil, "ISR RX 0x%08x\n", isr);
 
 	if (unlikely(!isr)) {
 		wil_err(wil, "spurious IRQ: RX\n");
+		wil6210_unmask_irq_rx_edma(wil);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_rx_edma(wil);
-
 	if (likely(isr & BIT_RX_STATUS_IRQ)) {
 		wil_dbg_irq(wil, "RX status ring\n");
 		isr &= ~BIT_RX_STATUS_IRQ;
@@ -403,21 +409,24 @@ static irqreturn_t wil6210_irq_rx_edma(int irq, void *cookie)
 static irqreturn_t wil6210_irq_tx_edma(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_INT_GEN_TX_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
 	bool need_unmask = true;
 
+	wil6210_mask_irq_tx_edma(wil);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_INT_GEN_TX_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
+
 	trace_wil6210_irq_tx(isr);
 	wil_dbg_irq(wil, "ISR TX 0x%08x\n", isr);
 
 	if (unlikely(!isr)) {
 		wil_err(wil, "spurious IRQ: TX\n");
+		wil6210_unmask_irq_tx_edma(wil);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_tx_edma(wil);
-
 	if (likely(isr & BIT_TX_STATUS_IRQ)) {
 		wil_dbg_irq(wil, "TX status ring\n");
 		isr &= ~BIT_TX_STATUS_IRQ;
@@ -446,21 +455,24 @@ static irqreturn_t wil6210_irq_tx_edma(int irq, void *cookie)
 static irqreturn_t wil6210_irq_tx(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_DMA_EP_TX_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
 	bool need_unmask = true;
 
+	wil6210_mask_irq_tx(wil);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_DMA_EP_TX_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
+
 	trace_wil6210_irq_tx(isr);
 	wil_dbg_irq(wil, "ISR TX 0x%08x\n", isr);
 
 	if (unlikely(!isr)) {
 		wil_err_ratelimited(wil, "spurious IRQ: TX\n");
+		wil6210_unmask_irq_tx(wil);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_tx(wil);
-
 	if (likely(isr & BIT_DMA_EP_TX_ICR_TX_DONE)) {
 		wil_dbg_irq(wil, "TX done\n");
 		isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE;
@@ -532,20 +544,23 @@ static bool wil_validate_mbox_regs(struct wil6210_priv *wil)
 static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_DMA_EP_MISC_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
+
+	wil6210_mask_irq_misc(wil, false);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
 
 	trace_wil6210_irq_misc(isr);
 	wil_dbg_irq(wil, "ISR MISC 0x%08x\n", isr);
 
 	if (!isr) {
 		wil_err(wil, "spurious IRQ: MISC\n");
+		wil6210_unmask_irq_misc(wil, false);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_misc(wil, false);
-
 	if (isr & ISR_MISC_FW_ERROR) {
 		u32 fw_assert_code = wil_r(wil, wil->rgf_fw_assert_code_addr);
 		u32 ucode_assert_code =
-- 
2.20.1

[PATCH AUTOSEL 5.2 015/249] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection

[Sasha Levin]

From: Anilkumar Kolli <akolli@codeaurora.org>

[ Upstream commit d8792393a783158cbb2c39939cb897dc5e5299b6 ]

Increase pulse width range from 1-2usec to 0-4usec.
During data traffic HW occasionally fails detecting radar pulses,
so that SW cannot get enough radar reports to achieve the success rate.

Tested ath10k hw and fw:
	* QCA9888(10.4-3.5.1-00052)
	* QCA4019(10.4-3.2.1.1-00017)
	* QCA9984(10.4-3.6-00104)
	* QCA988X(10.2.4-1.0-00041)

Tested ath9k hw: AR9300

Tested-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/dfs_pattern_detector.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index d52b31b45df7..a274eb0d1968 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -111,7 +111,7 @@ static const struct radar_detector_specs jp_radar_ref_types[] = {
 	JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 29, false),
 	JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 29, false),
 	JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, 50, false),
-	JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, 50, false),
+	JP_PATTERN(3, 0, 4, 4000, 4000, 1, 18, 50, false),
 	JP_PATTERN(4, 0, 5, 150, 230, 1, 23, 50, false),
 	JP_PATTERN(5, 6, 10, 200, 500, 1, 16, 50, false),
 	JP_PATTERN(6, 11, 20, 200, 500, 1, 12, 50, false),
-- 
2.20.1

[PATCH AUTOSEL 5.2 016/249] ath10k: Fix encoding for protected management frames

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit 42f1bc43e6a97b9ddbe976eba9bd05306c990c75 ]

Currently the protected management frames are
not appended with the MIC_LEN which results in
the protected management frames being encoded
incorrectly.

Add the extra space at the end of the protected
management frames to fix this encoding error for
the protected management frames.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 582fb11f648a..02709fc99034 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2840,8 +2840,10 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 	if ((ieee80211_is_action(hdr->frame_control) ||
 	     ieee80211_is_deauth(hdr->frame_control) ||
 	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control))
+	     ieee80211_has_protected(hdr->frame_control)) {
+		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
 		buf_len += IEEE80211_CCMP_MIC_LEN;
+	}
 
 	buf_len = min_t(u32, buf_len, WMI_TLV_MGMT_TX_FRAME_MAX_LEN);
 	buf_len = round_up(buf_len, 4);
-- 
2.20.1

[PATCH AUTOSEL 5.2 018/249] batman-adv: fix for leaked TVLV handler.

[Sasha Levin]

From: Jeremy Sowden <jeremy@azazel.net>

[ Upstream commit 17f78dd1bd624a4dd78ed5db3284a63ee807fcc3 ]

A handler for BATADV_TVLV_ROAM was being registered when the
translation-table was initialized, but not unregistered when the
translation-table was freed.  Unregister it.

Fixes: 122edaa05940 ("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets")
Reported-by: syzbot+d454a826e670502484b8@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/translation-table.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 1ddfd5e011ee..8a482c5ec67b 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -3813,6 +3813,8 @@ static void batadv_tt_purge(struct work_struct *work)
  */
 void batadv_tt_free(struct batadv_priv *bat_priv)
 {
+	batadv_tvlv_handler_unregister(bat_priv, BATADV_TVLV_ROAM, 1);
+
 	batadv_tvlv_container_unregister(bat_priv, BATADV_TVLV_TT, 1);
 	batadv_tvlv_handler_unregister(bat_priv, BATADV_TVLV_TT, 1);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 024/249] selftests/bpf: adjust verifier scale test

[Sasha Levin]

From: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit 7c0c6095d48dcd0e67c917aa73cdbb2715aafc36 ]

Adjust scale tests to check for new jmp sequence limit.

BPF_JGT had to be changed to BPF_JEQ because the verifier was
too smart. It tracked the known safe range of R0 values
and pruned the search earlier before hitting exact 8192 limit.
bpf_semi_rand_get() was too (un)?lucky.

k = 0; was missing in bpf_fill_scale2.
It was testing a bit shorter sequence of jumps than intended.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_verifier.c | 31 +++++++++++----------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 288cb740e005..6438d4dc8ae1 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -207,33 +207,35 @@ static void bpf_fill_rand_ld_dw(struct bpf_test *self)
 	self->retval = (uint32_t)res;
 }
 
-/* test the sequence of 1k jumps */
+#define MAX_JMP_SEQ 8192
+
+/* test the sequence of 8k jumps */
 static void bpf_fill_scale1(struct bpf_test *self)
 {
 	struct bpf_insn *insn = self->fill_insns;
 	int i = 0, k = 0;
 
 	insn[i++] = BPF_MOV64_REG(BPF_REG_6, BPF_REG_1);
-	/* test to check that the sequence of 1024 jumps is acceptable */
-	while (k++ < 1024) {
+	/* test to check that the long sequence of jumps is acceptable */
+	while (k++ < MAX_JMP_SEQ) {
 		insn[i++] = BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
 					 BPF_FUNC_get_prandom_u32);
-		insn[i++] = BPF_JMP_IMM(BPF_JGT, BPF_REG_0, bpf_semi_rand_get(), 2);
+		insn[i++] = BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, bpf_semi_rand_get(), 2);
 		insn[i++] = BPF_MOV64_REG(BPF_REG_1, BPF_REG_10);
 		insn[i++] = BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_6,
 					-8 * (k % 64 + 1));
 	}
-	/* every jump adds 1024 steps to insn_processed, so to stay exactly
-	 * within 1m limit add MAX_TEST_INSNS - 1025 MOVs and 1 EXIT
+	/* every jump adds 1 step to insn_processed, so to stay exactly
+	 * within 1m limit add MAX_TEST_INSNS - MAX_JMP_SEQ - 1 MOVs and 1 EXIT
 	 */
-	while (i < MAX_TEST_INSNS - 1025)
+	while (i < MAX_TEST_INSNS - MAX_JMP_SEQ - 1)
 		insn[i++] = BPF_ALU32_IMM(BPF_MOV, BPF_REG_0, 42);
 	insn[i] = BPF_EXIT_INSN();
 	self->prog_len = i + 1;
 	self->retval = 42;
 }
 
-/* test the sequence of 1k jumps in inner most function (function depth 8)*/
+/* test the sequence of 8k jumps in inner most function (function depth 8)*/
 static void bpf_fill_scale2(struct bpf_test *self)
 {
 	struct bpf_insn *insn = self->fill_insns;
@@ -245,19 +247,20 @@ static void bpf_fill_scale2(struct bpf_test *self)
 		insn[i++] = BPF_EXIT_INSN();
 	}
 	insn[i++] = BPF_MOV64_REG(BPF_REG_6, BPF_REG_1);
-	/* test to check that the sequence of 1024 jumps is acceptable */
-	while (k++ < 1024) {
+	/* test to check that the long sequence of jumps is acceptable */
+	k = 0;
+	while (k++ < MAX_JMP_SEQ) {
 		insn[i++] = BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
 					 BPF_FUNC_get_prandom_u32);
-		insn[i++] = BPF_JMP_IMM(BPF_JGT, BPF_REG_0, bpf_semi_rand_get(), 2);
+		insn[i++] = BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, bpf_semi_rand_get(), 2);
 		insn[i++] = BPF_MOV64_REG(BPF_REG_1, BPF_REG_10);
 		insn[i++] = BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_6,
 					-8 * (k % (64 - 4 * FUNC_NEST) + 1));
 	}
-	/* every jump adds 1024 steps to insn_processed, so to stay exactly
-	 * within 1m limit add MAX_TEST_INSNS - 1025 MOVs and 1 EXIT
+	/* every jump adds 1 step to insn_processed, so to stay exactly
+	 * within 1m limit add MAX_TEST_INSNS - MAX_JMP_SEQ - 1 MOVs and 1 EXIT
 	 */
-	while (i < MAX_TEST_INSNS - 1025)
+	while (i < MAX_TEST_INSNS - MAX_JMP_SEQ - 1)
 		insn[i++] = BPF_ALU32_IMM(BPF_MOV, BPF_REG_0, 42);
 	insn[i] = BPF_EXIT_INSN();
 	self->prog_len = i + 1;
-- 
2.20.1

[PATCH AUTOSEL 5.2 027/249] ice: Gracefully handle reset failure in ice_alloc_vfs()

[Sasha Levin]

From: Brett Creeley <brett.creeley@intel.com>

[ Upstream commit 72f9c2039859e6303550f202d6cc6b8d8af0178c ]

Currently if ice_reset_all_vfs() fails in ice_alloc_vfs() we fail to
free some resources, reset variables, and return an error value.
Fix this by adding another unroll case to free the pf->vf array, set
the pf->num_alloc_vfs to 0, and return an error code.

Without this, if ice_reset_all_vfs() fails in ice_alloc_vfs() we will
not be able to do SRIOV without hard rebooting the system because
rmmod'ing the driver does not work.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index a805cbdd69be..81ea77978355 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -1134,7 +1134,7 @@ static int ice_alloc_vfs(struct ice_pf *pf, u16 num_alloc_vfs)
 			   GFP_KERNEL);
 	if (!vfs) {
 		ret = -ENOMEM;
-		goto err_unroll_sriov;
+		goto err_pci_disable_sriov;
 	}
 	pf->vf = vfs;
 
@@ -1154,12 +1154,19 @@ static int ice_alloc_vfs(struct ice_pf *pf, u16 num_alloc_vfs)
 	pf->num_alloc_vfs = num_alloc_vfs;
 
 	/* VF resources get allocated during reset */
-	if (!ice_reset_all_vfs(pf, true))
+	if (!ice_reset_all_vfs(pf, true)) {
+		ret = -EIO;
 		goto err_unroll_sriov;
+	}
 
 	goto err_unroll_intr;
 
 err_unroll_sriov:
+	pf->vf = NULL;
+	devm_kfree(&pf->pdev->dev, vfs);
+	vfs = NULL;
+	pf->num_alloc_vfs = 0;
+err_pci_disable_sriov:
 	pci_disable_sriov(pf->pdev);
 err_unroll_intr:
 	/* rearm interrupts here */
-- 
2.20.1

[PATCH AUTOSEL 5.2 030/249] net: stmmac: dwmac1000: Clear unused address entries

[Sasha Levin]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 9463c445590091202659cdfdd44b236acadfbd84 ]

In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.

Found out while running stmmac selftests.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 9fff81170163..54f4ffb36d60 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -206,6 +206,12 @@ static void dwmac1000_set_filter(struct mac_device_info *hw,
 					    GMAC_ADDR_LOW(reg));
 			reg++;
 		}
+
+		while (reg <= perfect_addr_number) {
+			writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+			writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+			reg++;
+		}
 	}
 
 #ifdef FRAME_FILTER_DEBUG
-- 
2.20.1

[PATCH AUTOSEL 5.2 031/249] net: stmmac: dwmac4/5: Clear unused address entries

[Sasha Levin]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 0620ec6c62a5a07625b65f699adc5d1b90394ee6 ]

In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.

Found out while running stmmac selftests.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 99d772517242..206170d0bf81 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -443,14 +443,20 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 		 * are required
 		 */
 		value |= GMAC_PACKET_FILTER_PR;
-	} else if (!netdev_uc_empty(dev)) {
-		int reg = 1;
+	} else {
 		struct netdev_hw_addr *ha;
+		int reg = 1;
 
 		netdev_for_each_uc_addr(ha, dev) {
 			dwmac4_set_umac_addr(hw, ha->addr, reg);
 			reg++;
 		}
+
+		while (reg <= GMAC_MAX_PERFECT_ADDRESSES) {
+			writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+			writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+			reg++;
+		}
 	}
 
 	writel(value, ioaddr + GMAC_PACKET_FILTER);
-- 
2.20.1

[PATCH AUTOSEL 5.2 032/249] net: stmmac: Prevent missing interrupts when running NAPI

[Sasha Levin]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit a976ca79e23f13bff79c14e7266cea4a0ea51e67 ]

When we trigger NAPI we are disabling interrupts but in case we receive
or send a packet in the meantime, as interrupts are disabled, we will
miss this event.

Trigger both NAPI instances (RX and TX) when at least one event happens
so that we don't miss any interrupts.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 06358fe5b245..dbee9b0113e3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2048,6 +2048,9 @@ static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan)
 						 &priv->xstats, chan);
 	struct stmmac_channel *ch = &priv->channel[chan];
 
+	if (status)
+		status |= handle_rx | handle_tx;
+
 	if ((status & handle_rx) && (chan < priv->plat->rx_queues_to_use)) {
 		stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
 		napi_schedule_irqoff(&ch->rx_napi);
-- 
2.20.1

[PATCH AUTOSEL 5.2 033/249] ice: Fix couple of issues in ice_vsi_release

[Sasha Levin]

From: Brett Creeley <brett.creeley@intel.com>

[ Upstream commit aa6ccf3f2d7042f94c4e91538956ce7051e7856e ]

Currently the driver is calling ice_napi_del() and then
unregister_netdev(). The call to unregister_netdev() will result in a
call to ice_stop() and then ice_vsi_close(). This is where we call
napi_disable() for all the MSI-X vectors. This flow is reversed so make
the changes to ensure napi_disable() happens prior to napi_del().

Before calling napi_del() and free_netdev() make sure
unregister_netdev() was called. This is done by making sure the
__ICE_DOWN bit is set in the vsi->state for the interested VSI.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice.h      |  1 -
 drivers/net/ethernet/intel/ice/ice_lib.c  | 24 ++++++++++++-----------
 drivers/net/ethernet/intel/ice/ice_main.c |  2 +-
 3 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 792e6e42030e..754c7080c3fc 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -451,7 +451,6 @@ int ice_set_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size);
 int ice_get_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size);
 void ice_fill_rss_lut(u8 *lut, u16 rss_table_size, u16 rss_size);
 void ice_print_link_msg(struct ice_vsi *vsi, bool isup);
-void ice_napi_del(struct ice_vsi *vsi);
 #ifdef CONFIG_DCB
 int ice_pf_ena_all_vsi(struct ice_pf *pf, bool locked);
 void ice_pf_dis_all_vsi(struct ice_pf *pf, bool locked);
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index fbf1eba0cc2a..f14fa51cc704 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -2754,19 +2754,14 @@ int ice_vsi_release(struct ice_vsi *vsi)
 
 	if (vsi->type == ICE_VSI_VF)
 		vf = &pf->vf[vsi->vf_id];
-	/* do not unregister and free netdevs while driver is in the reset
-	 * recovery pending state. Since reset/rebuild happens through PF
-	 * service task workqueue, its not a good idea to unregister netdev
-	 * that is associated to the PF that is running the work queue items
-	 * currently. This is done to avoid check_flush_dependency() warning
-	 * on this wq
+	/* do not unregister while driver is in the reset recovery pending
+	 * state. Since reset/rebuild happens through PF service task workqueue,
+	 * it's not a good idea to unregister netdev that is associated to the
+	 * PF that is running the work queue items currently. This is done to
+	 * avoid check_flush_dependency() warning on this wq
 	 */
-	if (vsi->netdev && !ice_is_reset_in_progress(pf->state)) {
-		ice_napi_del(vsi);
+	if (vsi->netdev && !ice_is_reset_in_progress(pf->state))
 		unregister_netdev(vsi->netdev);
-		free_netdev(vsi->netdev);
-		vsi->netdev = NULL;
-	}
 
 	if (test_bit(ICE_FLAG_RSS_ENA, pf->flags))
 		ice_rss_clean(vsi);
@@ -2799,6 +2794,13 @@ int ice_vsi_release(struct ice_vsi *vsi)
 	ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx);
 	ice_vsi_delete(vsi);
 	ice_vsi_free_q_vectors(vsi);
+
+	/* make sure unregister_netdev() was called by checking __ICE_DOWN */
+	if (vsi->netdev && test_bit(__ICE_DOWN, vsi->state)) {
+		free_netdev(vsi->netdev);
+		vsi->netdev = NULL;
+	}
+
 	ice_vsi_clear_rings(vsi);
 
 	ice_vsi_put_qs(vsi);
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 7843abf4d44d..dbf3d39ad8b1 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1667,7 +1667,7 @@ static int ice_req_irq_msix_misc(struct ice_pf *pf)
  * ice_napi_del - Remove NAPI handler for the VSI
  * @vsi: VSI for which NAPI handler is to be removed
  */
-void ice_napi_del(struct ice_vsi *vsi)
+static void ice_napi_del(struct ice_vsi *vsi)
 {
 	int v_idx;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 034/249] net: mvpp2: cls: Extract the RSS context when parsing the ethtool rule

[Sasha Levin]

From: Maxime Chevallier <maxime.chevallier@bootlin.com>

[ Upstream commit c561da68038a738f30eca21456534c2d1872d13d ]

ethtool_rx_flow_rule_create takes into parameter the ethtool flow spec,
which doesn't contain the rss context id. We therefore need to extract
it ourself before parsing the ethtool rule.

The FLOW_RSS flag is only set in info->fs.flow_type, and not
info->flow_type.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
index a57d17ab91f0..fb06c0aa620a 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
@@ -1242,6 +1242,12 @@ int mvpp2_ethtool_cls_rule_ins(struct mvpp2_port *port,
 
 	input.fs = &info->fs;
 
+	/* We need to manually set the rss_ctx, since this info isn't present
+	 * in info->fs
+	 */
+	if (info->fs.flow_type & FLOW_RSS)
+		input.rss_ctx = info->rss_context;
+
 	ethtool_rule = ethtool_rx_flow_rule_create(&input);
 	if (IS_ERR(ethtool_rule)) {
 		ret = PTR_ERR(ethtool_rule);
-- 
2.20.1

[PATCH AUTOSEL 5.2 035/249] net: hns3: initialize CPU reverse mapping

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit ffab9691bcb2fe2594f4c38bfceb4d9685b93b87 ]

Allocate CPU rmap and add entry for each irq. CPU rmap is
used in aRFS to get the queue number of the rx completion
interrupts.

In additional, remove the calling of
irq_set_affinity_notifier() in hns3_nic_init_irq(), because
we have registered notifier in irq_cpu_rmap_add() for each
vector, otherwise it may cause use-after-free issue.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 77 ++++++++++++-------
 1 file changed, 48 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index f326805543a4..cd59c0cc636a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -4,6 +4,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/etherdevice.h>
 #include <linux/interrupt.h>
+#ifdef CONFIG_RFS_ACCEL
+#include <linux/cpu_rmap.h>
+#endif
 #include <linux/if_vlan.h>
 #include <linux/ip.h>
 #include <linux/ipv6.h>
@@ -79,23 +82,6 @@ static irqreturn_t hns3_irq_handle(int irq, void *vector)
 	return IRQ_HANDLED;
 }
 
-/* This callback function is used to set affinity changes to the irq affinity
- * masks when the irq_set_affinity_notifier function is used.
- */
-static void hns3_nic_irq_affinity_notify(struct irq_affinity_notify *notify,
-					 const cpumask_t *mask)
-{
-	struct hns3_enet_tqp_vector *tqp_vectors =
-		container_of(notify, struct hns3_enet_tqp_vector,
-			     affinity_notify);
-
-	tqp_vectors->affinity_mask = *mask;
-}
-
-static void hns3_nic_irq_affinity_release(struct kref *ref)
-{
-}
-
 static void hns3_nic_uninit_irq(struct hns3_nic_priv *priv)
 {
 	struct hns3_enet_tqp_vector *tqp_vectors;
@@ -107,8 +93,7 @@ static void hns3_nic_uninit_irq(struct hns3_nic_priv *priv)
 		if (tqp_vectors->irq_init_flag != HNS3_VECTOR_INITED)
 			continue;
 
-		/* clear the affinity notifier and affinity mask */
-		irq_set_affinity_notifier(tqp_vectors->vector_irq, NULL);
+		/* clear the affinity mask */
 		irq_set_affinity_hint(tqp_vectors->vector_irq, NULL);
 
 		/* release the irq resource */
@@ -161,12 +146,6 @@ static int hns3_nic_init_irq(struct hns3_nic_priv *priv)
 			return ret;
 		}
 
-		tqp_vectors->affinity_notify.notify =
-					hns3_nic_irq_affinity_notify;
-		tqp_vectors->affinity_notify.release =
-					hns3_nic_irq_affinity_release;
-		irq_set_affinity_notifier(tqp_vectors->vector_irq,
-					  &tqp_vectors->affinity_notify);
 		irq_set_affinity_hint(tqp_vectors->vector_irq,
 				      &tqp_vectors->affinity_mask);
 
@@ -340,6 +319,40 @@ static void hns3_tqp_disable(struct hnae3_queue *tqp)
 	hns3_write_dev(tqp, HNS3_RING_EN_REG, rcb_reg);
 }
 
+static void hns3_free_rx_cpu_rmap(struct net_device *netdev)
+{
+#ifdef CONFIG_RFS_ACCEL
+	free_irq_cpu_rmap(netdev->rx_cpu_rmap);
+	netdev->rx_cpu_rmap = NULL;
+#endif
+}
+
+static int hns3_set_rx_cpu_rmap(struct net_device *netdev)
+{
+#ifdef CONFIG_RFS_ACCEL
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+	struct hns3_enet_tqp_vector *tqp_vector;
+	int i, ret;
+
+	if (!netdev->rx_cpu_rmap) {
+		netdev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->vector_num);
+		if (!netdev->rx_cpu_rmap)
+			return -ENOMEM;
+	}
+
+	for (i = 0; i < priv->vector_num; i++) {
+		tqp_vector = &priv->tqp_vector[i];
+		ret = irq_cpu_rmap_add(netdev->rx_cpu_rmap,
+				       tqp_vector->vector_irq);
+		if (ret) {
+			hns3_free_rx_cpu_rmap(netdev);
+			return ret;
+		}
+	}
+#endif
+	return 0;
+}
+
 static int hns3_nic_net_up(struct net_device *netdev)
 {
 	struct hns3_nic_priv *priv = netdev_priv(netdev);
@@ -351,11 +364,16 @@ static int hns3_nic_net_up(struct net_device *netdev)
 	if (ret)
 		return ret;
 
+	/* the device can work without cpu rmap, only aRFS needs it */
+	ret = hns3_set_rx_cpu_rmap(netdev);
+	if (ret)
+		netdev_warn(netdev, "set rx cpu rmap fail, ret=%d!\n", ret);
+
 	/* get irq resource for all vectors */
 	ret = hns3_nic_init_irq(priv);
 	if (ret) {
 		netdev_err(netdev, "hns init irq failed! ret=%d\n", ret);
-		return ret;
+		goto free_rmap;
 	}
 
 	clear_bit(HNS3_NIC_STATE_DOWN, &priv->state);
@@ -384,7 +402,8 @@ static int hns3_nic_net_up(struct net_device *netdev)
 		hns3_vector_disable(&priv->tqp_vector[j]);
 
 	hns3_nic_uninit_irq(priv);
-
+free_rmap:
+	hns3_free_rx_cpu_rmap(netdev);
 	return ret;
 }
 
@@ -467,6 +486,8 @@ static void hns3_nic_net_down(struct net_device *netdev)
 	if (ops->stop)
 		ops->stop(priv->ae_handle);
 
+	hns3_free_rx_cpu_rmap(netdev);
+
 	/* free irq resources */
 	hns3_nic_uninit_irq(priv);
 
@@ -3331,8 +3352,6 @@ static void hns3_nic_uninit_vector_data(struct hns3_nic_priv *priv)
 		hns3_free_vector_ring_chain(tqp_vector, &vector_ring_chain);
 
 		if (tqp_vector->irq_init_flag == HNS3_VECTOR_INITED) {
-			irq_set_affinity_notifier(tqp_vector->vector_irq,
-						  NULL);
 			irq_set_affinity_hint(tqp_vector->vector_irq, NULL);
 			free_irq(tqp_vector->vector_irq, tqp_vector);
 			tqp_vector->irq_init_flag = HNS3_VECTOR_NOT_INITED;
-- 
2.20.1

[PATCH AUTOSEL 5.2 036/249] net: hns3: fix for FEC configuration

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit f438bfe9d4fe2e491505abfbf04d7c506e00d146 ]

The FEC capbility may be changed with port speed changes. Driver
needs to read the active FEC mode, and update FEC capability
when port speed changes.

Fixes: 7e6ec9148a1d ("net: hns3: add support for FEC encoding control")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index d3b1f8cb1155..4d9bcad26f06 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2508,6 +2508,9 @@ static void hclge_update_link_status(struct hclge_dev *hdev)
 
 static void hclge_update_port_capability(struct hclge_mac *mac)
 {
+	/* update fec ability by speed */
+	hclge_convert_setting_fec(mac);
+
 	/* firmware can not identify back plane type, the media type
 	 * read from configuration can help deal it
 	 */
@@ -2580,6 +2583,10 @@ static int hclge_get_sfp_info(struct hclge_dev *hdev, struct hclge_mac *mac)
 		mac->speed_ability = le32_to_cpu(resp->speed_ability);
 		mac->autoneg = resp->autoneg;
 		mac->support_autoneg = resp->autoneg_ability;
+		if (!resp->active_fec)
+			mac->fec_mode = 0;
+		else
+			mac->fec_mode = BIT(resp->active_fec);
 	} else {
 		mac->speed_type = QUERY_SFP_SPEED;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 037/249] qed: Set the doorbell address correctly

[Sasha Levin]

From: Michal Kalderon <michal.kalderon@marvell.com>

[ Upstream commit 8366d520019f366fabd6c7a13032bdcd837e18d4 ]

In 100g mode the doorbell bar is united for both engines. Set
the correct offset in the hwfn so that the doorbell returned
for RoCE is in the affined hwfn.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Denis Bolotin <denis.bolotin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c  | 29 ++++++++++++++--------
 drivers/net/ethernet/qlogic/qed/qed_rdma.c |  2 +-
 2 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index fccdb06fc5c5..8c40739e0d1b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -3443,6 +3443,7 @@ static void qed_nvm_info_free(struct qed_hwfn *p_hwfn)
 static int qed_hw_prepare_single(struct qed_hwfn *p_hwfn,
 				 void __iomem *p_regview,
 				 void __iomem *p_doorbells,
+				 u64 db_phys_addr,
 				 enum qed_pci_personality personality)
 {
 	struct qed_dev *cdev = p_hwfn->cdev;
@@ -3451,6 +3452,7 @@ static int qed_hw_prepare_single(struct qed_hwfn *p_hwfn,
 	/* Split PCI bars evenly between hwfns */
 	p_hwfn->regview = p_regview;
 	p_hwfn->doorbells = p_doorbells;
+	p_hwfn->db_phys_addr = db_phys_addr;
 
 	if (IS_VF(p_hwfn->cdev))
 		return qed_vf_hw_prepare(p_hwfn);
@@ -3546,7 +3548,9 @@ int qed_hw_prepare(struct qed_dev *cdev,
 	/* Initialize the first hwfn - will learn number of hwfns */
 	rc = qed_hw_prepare_single(p_hwfn,
 				   cdev->regview,
-				   cdev->doorbells, personality);
+				   cdev->doorbells,
+				   cdev->db_phys_addr,
+				   personality);
 	if (rc)
 		return rc;
 
@@ -3555,22 +3559,25 @@ int qed_hw_prepare(struct qed_dev *cdev,
 	/* Initialize the rest of the hwfns */
 	if (cdev->num_hwfns > 1) {
 		void __iomem *p_regview, *p_doorbell;
-		u8 __iomem *addr;
+		u64 db_phys_addr;
+		u32 offset;
 
 		/* adjust bar offset for second engine */
-		addr = cdev->regview +
-		       qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
-				       BAR_ID_0) / 2;
-		p_regview = addr;
+		offset = qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
+					 BAR_ID_0) / 2;
+		p_regview = cdev->regview + offset;
 
-		addr = cdev->doorbells +
-		       qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
-				       BAR_ID_1) / 2;
-		p_doorbell = addr;
+		offset = qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
+					 BAR_ID_1) / 2;
+
+		p_doorbell = cdev->doorbells + offset;
+
+		db_phys_addr = cdev->db_phys_addr + offset;
 
 		/* prepare second hw function */
 		rc = qed_hw_prepare_single(&cdev->hwfns[1], p_regview,
-					   p_doorbell, personality);
+					   p_doorbell, db_phys_addr,
+					   personality);
 
 		/* in case of error, need to free the previously
 		 * initiliazed hwfn 0.
diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index 7873d6dfd91f..13802b825d65 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -803,7 +803,7 @@ static int qed_rdma_add_user(void *rdma_cxt,
 				     dpi_start_offset +
 				     ((out_params->dpi) * p_hwfn->dpi_size));
 
-	out_params->dpi_phys_addr = p_hwfn->cdev->db_phys_addr +
+	out_params->dpi_phys_addr = p_hwfn->db_phys_addr +
 				    dpi_start_offset +
 				    ((out_params->dpi) * p_hwfn->dpi_size);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 040/249] af_key: fix leaks in key_pol_get_resp and dump_sp.

[Sasha Levin]

From: Jeremy Sowden <jeremy@azazel.net>

[ Upstream commit 7c80eb1c7e2b8420477fbc998971d62a648035d9 ]

In both functions, if pfkey_xfrm_policy2msg failed we leaked the newly
allocated sk_buff.  Free it on error.

Fixes: 55569ce256ce ("Fix conversion between IPSEC_MODE_xxx and XFRM_MODE_xxx.")
Reported-by: syzbot+4f0529365f7f2208d9f0@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/key/af_key.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index a50dd6f34b91..fe5fc4bab7ee 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2438,8 +2438,10 @@ static int key_pol_get_resp(struct sock *sk, struct xfrm_policy *xp, const struc
 		goto out;
 	}
 	err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(out_skb);
 		goto out;
+	}
 
 	out_hdr = (struct sadb_msg *) out_skb->data;
 	out_hdr->sadb_msg_version = hdr->sadb_msg_version;
@@ -2690,8 +2692,10 @@ static int dump_sp(struct xfrm_policy *xp, int dir, int count, void *ptr)
 		return PTR_ERR(out_skb);
 
 	err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(out_skb);
 		return err;
+	}
 
 	out_hdr = (struct sadb_msg *) out_skb->data;
 	out_hdr->sadb_msg_version = pfk->dump.msg_version;
-- 
2.20.1

[PATCH AUTOSEL 5.2 041/249] xfrm: Fix xfrm sel prefix length validation

[Sasha Levin]

From: Anirudh Gupta <anirudhrudr@gmail.com>

[ Upstream commit b38ff4075a80b4da5cb2202d7965332ca0efb213 ]

Family of src/dst can be different from family of selector src/dst.
Use xfrm selector family to validate address prefix length,
while verifying new sa from userspace.

Validated patch with this command:
ip xfrm state add src 1.1.6.1 dst 1.1.6.2 proto esp spi 4260196 \
reqid 20004 mode tunnel aead "rfc4106(gcm(aes))" \
0x1111016400000000000000000000000044440001 128 \
sel src 1011:1:4::2/128 sel dst 1021:1:4::2/128 dev Port5

Fixes: 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.")
Signed-off-by: Anirudh Gupta <anirudh.gupta@sophos.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 173477211e40..76ad7e201626 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -151,6 +151,22 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 
 	err = -EINVAL;
 	switch (p->family) {
+	case AF_INET:
+		break;
+
+	case AF_INET6:
+#if IS_ENABLED(CONFIG_IPV6)
+		break;
+#else
+		err = -EAFNOSUPPORT;
+		goto out;
+#endif
+
+	default:
+		goto out;
+	}
+
+	switch (p->sel.family) {
 	case AF_INET:
 		if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
 			goto out;
-- 
2.20.1

[PATCH AUTOSEL 5.2 047/249] Revert "e1000e: fix cyclic resets at link up with active tx"

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit caff422ea81e144842bc44bab408d85ac449377b ]

This reverts commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61.

That change cased false-positive warning about hardware hang:

e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang:
   TDH                  <0>
   TDT                  <1>
   next_to_use          <1>
   next_to_clean        <0>
buffer_info[next_to_clean]:
   time_stamp           <fffba7a7>
   next_to_watch        <0>
   jiffies              <fffbb140>
   next_to_watch.status <0>
MAC Status             <40080080>
PHY Status             <7949>
PHY 1000BASE-T Status  <0>
PHY Extended Status    <3000>
PCI Status             <10>
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

Besides warning everything works fine.
Original issue will be fixed property in following patch.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Joseph Yasi <joe.yasi@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203175
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 0e09bede42a2..e21b2ffd1e92 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5308,13 +5308,8 @@ static void e1000_watchdog_task(struct work_struct *work)
 			/* 8000ES2LAN requires a Rx packet buffer work-around
 			 * on link down event; reset the controller to flush
 			 * the Rx packet buffer.
-			 *
-			 * If the link is lost the controller stops DMA, but
-			 * if there is queued Tx work it cannot be done.  So
-			 * reset the controller to flush the Tx packet buffers.
 			 */
-			if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
-			    e1000_desc_unused(tx_ring) + 1 < tx_ring->count)
+			if (adapter->flags & FLAG_RX_NEEDS_RESTART)
 				adapter->flags |= FLAG_RESTART_NOW;
 			else
 				pm_schedule_suspend(netdev->dev.parent,
@@ -5337,6 +5332,14 @@ static void e1000_watchdog_task(struct work_struct *work)
 	adapter->gotc_old = adapter->stats.gotc;
 	spin_unlock(&adapter->stats64_lock);
 
+	/* If the link is lost the controller stops DMA, but
+	 * if there is queued Tx work it cannot be done.  So
+	 * reset the controller to flush the Tx packet buffers.
+	 */
+	if (!netif_carrier_ok(netdev) &&
+	    (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
+		adapter->flags |= FLAG_RESTART_NOW;
+
 	/* If reset is necessary, do it outside of interrupt context. */
 	if (adapter->flags & FLAG_RESTART_NOW) {
 		schedule_work(&adapter->reset_task);
-- 
2.20.1

[PATCH AUTOSEL 5.2 048/249] e1000e: start network tx queue only when link is up

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit d17ba0f616a08f597d9348c372d89b8c0405ccf3 ]

Driver does not want to keep packets in Tx queue when link is lost.
But present code only reset NIC to flush them, but does not prevent
queuing new packets. Moreover reset sequence itself could generate
new packets via netconsole and NIC falls into endless reset loop.

This patch wakes Tx queue only when NIC is ready to send packets.

This is proper fix for problem addressed by commit 0f9e980bf5ee
("e1000e: fix cyclic resets at link up with active tx").

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index e21b2ffd1e92..b081a1ef6859 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4208,7 +4208,7 @@ void e1000e_up(struct e1000_adapter *adapter)
 		e1000_configure_msix(adapter);
 	e1000_irq_enable(adapter);
 
-	netif_start_queue(adapter->netdev);
+	/* Tx queue started by watchdog timer when link is up */
 
 	e1000e_trigger_lsc(adapter);
 }
@@ -4606,6 +4606,7 @@ int e1000e_open(struct net_device *netdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	netif_carrier_off(netdev);
+	netif_stop_queue(netdev);
 
 	/* allocate transmit descriptors */
 	err = e1000e_setup_tx_resources(adapter->tx_ring);
@@ -4666,7 +4667,6 @@ int e1000e_open(struct net_device *netdev)
 	e1000_irq_enable(adapter);
 
 	adapter->tx_hang_recheck = false;
-	netif_start_queue(netdev);
 
 	hw->mac.get_link_status = true;
 	pm_runtime_put(&pdev->dev);
@@ -5288,6 +5288,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			if (phy->ops.cfg_on_link_up)
 				phy->ops.cfg_on_link_up(hw);
 
+			netif_wake_queue(netdev);
 			netif_carrier_on(netdev);
 
 			if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -5301,6 +5302,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			/* Link status message must follow this format */
 			pr_info("%s NIC Link is Down\n", adapter->netdev->name);
 			netif_carrier_off(netdev);
+			netif_stop_queue(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
 				mod_timer(&adapter->phy_info_timer,
 					  round_jiffies(jiffies + 2 * HZ));
-- 
2.20.1

[PATCH AUTOSEL 5.2 049/249] ice: Check all VFs for MDD activity, don't disable

[Sasha Levin]

From: Mitch Williams <mitch.a.williams@intel.com>

[ Upstream commit 23c0112246b454e408fb0579b3f9089353d4d327 ]

Don't use the mdd_detected variable as an exit condition for this loop;
the first VF to NOT have an MDD event will cause the loop to terminate.

Instead just look at all of the VFs, but don't disable them. This
prevents proper release of resources if the VFs are rebooted or the VF
driver reloaded. Instead, just log a message and call out repeat
offenders.

To make it clear what we are doing, use a differently-named variable in
the loop.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index dbf3d39ad8b1..1c803106e301 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1161,16 +1161,16 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
 		}
 	}
 
-	/* see if one of the VFs needs to be reset */
-	for (i = 0; i < pf->num_alloc_vfs && mdd_detected; i++) {
+	/* check to see if one of the VFs caused the MDD */
+	for (i = 0; i < pf->num_alloc_vfs; i++) {
 		struct ice_vf *vf = &pf->vf[i];
 
-		mdd_detected = false;
+		bool vf_mdd_detected = false;
 
 		reg = rd32(hw, VP_MDET_TX_PQM(i));
 		if (reg & VP_MDET_TX_PQM_VALID_M) {
 			wr32(hw, VP_MDET_TX_PQM(i), 0xFFFF);
-			mdd_detected = true;
+			vf_mdd_detected = true;
 			dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
 				 i);
 		}
@@ -1178,7 +1178,7 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
 		reg = rd32(hw, VP_MDET_TX_TCLAN(i));
 		if (reg & VP_MDET_TX_TCLAN_VALID_M) {
 			wr32(hw, VP_MDET_TX_TCLAN(i), 0xFFFF);
-			mdd_detected = true;
+			vf_mdd_detected = true;
 			dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
 				 i);
 		}
@@ -1186,7 +1186,7 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
 		reg = rd32(hw, VP_MDET_TX_TDPU(i));
 		if (reg & VP_MDET_TX_TDPU_VALID_M) {
 			wr32(hw, VP_MDET_TX_TDPU(i), 0xFFFF);
-			mdd_detected = true;
+			vf_mdd_detected = true;
 			dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
 				 i);
 		}
@@ -1194,19 +1194,18 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
 		reg = rd32(hw, VP_MDET_RX(i));
 		if (reg & VP_MDET_RX_VALID_M) {
 			wr32(hw, VP_MDET_RX(i), 0xFFFF);
-			mdd_detected = true;
+			vf_mdd_detected = true;
 			dev_info(&pf->pdev->dev, "RX driver issue detected on VF %d\n",
 				 i);
 		}
 
-		if (mdd_detected) {
+		if (vf_mdd_detected) {
 			vf->num_mdd_events++;
-			dev_info(&pf->pdev->dev,
-				 "Use PF Control I/F to re-enable the VF\n");
-			set_bit(ICE_VF_STATE_DIS, vf->vf_states);
+			if (vf->num_mdd_events > 1)
+				dev_info(&pf->pdev->dev, "VF %d has had %llu MDD events since last boot\n",
+					 i, vf->num_mdd_events);
 		}
 	}
-
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 5.2 054/249] net: phy: Check against net_device being NULL

[Sasha Levin]

From: Ioana Ciornei <ioana.ciornei@nxp.com>

[ Upstream commit 82c76aca81187b3d28a6fb3062f6916450ce955e ]

In general, we don't want MAC drivers calling phy_attach_direct with the
net_device being NULL. Add checks against this in all the functions
calling it: phy_attach() and phy_connect_direct().

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index dcc93a873174..a3f8740c6163 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -948,6 +948,9 @@ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
 {
 	int rc;
 
+	if (!dev)
+		return -EINVAL;
+
 	rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
 	if (rc)
 		return rc;
@@ -1290,6 +1293,9 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
 	struct device *d;
 	int rc;
 
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
 	/* Search the list of PHY devices on the mdio bus for the
 	 * PHY with the requested name
 	 */
-- 
2.20.1

[PATCH AUTOSEL 5.2 055/249] net: dsa: sja1105: Fix broken fixed-link interfaces on user ports

[Sasha Levin]

From: Vladimir Oltean <olteanv@gmail.com>

[ Upstream commit af7cd0366ee994e8b35985d407261dc0ed9dfb4d ]

PHYLIB and PHYLINK handle fixed-link interfaces differently. PHYLIB
wraps them in a software PHY ("pseudo fixed link") phydev construct such
that .adjust_link driver callbacks see an unified API. Whereas PHYLINK
simply creates a phylink_link_state structure and passes it to
.mac_config.

At the time the driver was introduced, DSA was using PHYLIB for the
CPU/cascade ports (the ones with no net devices) and PHYLINK for
everything else.

As explained below:

commit aab9c4067d2389d0adfc9c53806437df7b0fe3d5
Author: Florian Fainelli <f.fainelli@gmail.com>
Date:   Thu May 10 13:17:36 2018 -0700

  net: dsa: Plug in PHYLINK support

  Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2)
  will need to implement phylink_mac_ops from now on to preserve
  functionality, since PHYLINK *does not* create a phy_device instance
  for fixed links.

In the above patch, DSA guards the .phylink_mac_config callback against
a NULL phydev pointer.  Therefore, .adjust_link is not called in case of
a fixed-link user port.

This patch fixes the situation by converting the driver from using
.adjust_link to .phylink_mac_config.  This can be done now in a unified
fashion for both slave and CPU/cascade ports because DSA now uses
PHYLINK for all ports.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/sja1105/sja1105_main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 1c3959efebc4..844e038f3dc6 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -734,15 +734,16 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
 	return sja1105_clocking_setup_port(priv, port);
 }
 
-static void sja1105_adjust_link(struct dsa_switch *ds, int port,
-				struct phy_device *phydev)
+static void sja1105_mac_config(struct dsa_switch *ds, int port,
+			       unsigned int link_an_mode,
+			       const struct phylink_link_state *state)
 {
 	struct sja1105_private *priv = ds->priv;
 
-	if (!phydev->link)
+	if (!state->link)
 		sja1105_adjust_port_config(priv, port, 0, false);
 	else
-		sja1105_adjust_port_config(priv, port, phydev->speed, true);
+		sja1105_adjust_port_config(priv, port, state->speed, true);
 }
 
 static void sja1105_phylink_validate(struct dsa_switch *ds, int port,
@@ -1515,9 +1516,9 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds,
 static const struct dsa_switch_ops sja1105_switch_ops = {
 	.get_tag_protocol	= sja1105_get_tag_protocol,
 	.setup			= sja1105_setup,
-	.adjust_link		= sja1105_adjust_link,
 	.set_ageing_time	= sja1105_set_ageing_time,
 	.phylink_validate	= sja1105_phylink_validate,
+	.phylink_mac_config	= sja1105_mac_config,
 	.get_strings		= sja1105_get_strings,
 	.get_ethtool_stats	= sja1105_get_ethtool_stats,
 	.get_sset_count		= sja1105_get_sset_count,
-- 
2.20.1

[PATCH AUTOSEL 5.2 059/249] batman-adv: Fix duplicated OGMs on NETDEV_UP

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 9e6b5648bbc4cd48fab62cecbb81e9cc3c6e7e88 ]

The state of slave interfaces are handled differently depending on whether
the interface is up or not. All active interfaces (IFF_UP) will transmit
OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling
(low TTL) OGMs on active interfaces. The code which setups and schedules
the OGMs must therefore already be called when the interfaces gets added as
slave interface and the transmit function must then check whether it has to
send out the OGM or not on the specific slave interface.

But the commit f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule
API calls") moved the setup code from the enable function to the activate
function. The latter is called either when the added slave was already up
when batadv_hardif_enable_interface processed the new interface or when a
NETDEV_UP event was received for this slave interfac. As result, each
NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs
would be send a lot more than expected.

Fixes: f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule API calls")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_iv_ogm.c     | 4 ++--
 net/batman-adv/hard-interface.c | 3 +++
 net/batman-adv/types.h          | 3 +++
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index bd4138ddf7e0..240ed70912d6 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -2337,7 +2337,7 @@ batadv_iv_ogm_neigh_is_sob(struct batadv_neigh_node *neigh1,
 	return ret;
 }
 
-static void batadv_iv_iface_activate(struct batadv_hard_iface *hard_iface)
+static void batadv_iv_iface_enabled(struct batadv_hard_iface *hard_iface)
 {
 	/* begin scheduling originator messages on that interface */
 	batadv_iv_ogm_schedule(hard_iface);
@@ -2683,8 +2683,8 @@ static void batadv_iv_gw_dump(struct sk_buff *msg, struct netlink_callback *cb,
 static struct batadv_algo_ops batadv_batman_iv __read_mostly = {
 	.name = "BATMAN_IV",
 	.iface = {
-		.activate = batadv_iv_iface_activate,
 		.enable = batadv_iv_ogm_iface_enable,
+		.enabled = batadv_iv_iface_enabled,
 		.disable = batadv_iv_ogm_iface_disable,
 		.update_mac = batadv_iv_ogm_iface_update_mac,
 		.primary_set = batadv_iv_ogm_primary_iface_set,
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
index 79d1731b8306..3719cfd026f0 100644
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -795,6 +795,9 @@ int batadv_hardif_enable_interface(struct batadv_hard_iface *hard_iface,
 
 	batadv_hardif_recalc_extra_skbroom(soft_iface);
 
+	if (bat_priv->algo_ops->iface.enabled)
+		bat_priv->algo_ops->iface.enabled(hard_iface);
+
 out:
 	return 0;
 
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 74b644738a36..e0b25104cbfa 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -2129,6 +2129,9 @@ struct batadv_algo_iface_ops {
 	/** @enable: init routing info when hard-interface is enabled */
 	int (*enable)(struct batadv_hard_iface *hard_iface);
 
+	/** @enabled: notification when hard-interface was enabled (optional) */
+	void (*enabled)(struct batadv_hard_iface *hard_iface);
+
 	/** @disable: de-init routing info when hard-interface is disabled */
 	void (*disable)(struct batadv_hard_iface *hard_iface);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 064/249] net: hns3: add a check to pointer in error_detected and slot_reset

[Sasha Levin]

From: Weihang Li <liweihang@hisilicon.com>

[ Upstream commit 661262bc3e0ecc9a1aed39c6b2a99766da2c22e2 ]

If we add a VF without loading hclgevf.ko and then there is a RAS error
occurs, PCIe AER will call error_detected and slot_reset of all functions,
and will get a NULL pointer when we check ad_dev->ops->handle_hw_ras_error.
This will cause a call trace and failures on handling of follow-up RAS
errors.

This patch check ae_dev and ad_dev->ops at first to solve above issues.

Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index cd59c0cc636a..5611b990ac34 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1916,9 +1916,9 @@ static pci_ers_result_t hns3_error_detected(struct pci_dev *pdev,
 	if (state == pci_channel_io_perm_failure)
 		return PCI_ERS_RESULT_DISCONNECT;
 
-	if (!ae_dev) {
+	if (!ae_dev || !ae_dev->ops) {
 		dev_err(&pdev->dev,
-			"Can't recover - error happened during device init\n");
+			"Can't recover - error happened before device initialized\n");
 		return PCI_ERS_RESULT_NONE;
 	}
 
@@ -1937,6 +1937,9 @@ static pci_ers_result_t hns3_slot_reset(struct pci_dev *pdev)
 
 	dev_info(dev, "requesting reset due to PCI error\n");
 
+	if (!ae_dev || !ae_dev->ops)
+		return PCI_ERS_RESULT_NONE;
+
 	/* request the reset */
 	if (ae_dev->ops->reset_event) {
 		if (!ae_dev->override_pci_need_reset)
-- 
2.20.1

[PATCH AUTOSEL 5.2 065/249] net: hns3: set ops to null when unregister ad_dev

[Sasha Levin]

From: Weihang Li <liweihang@hisilicon.com>

[ Upstream commit 594a81b39525f0a17e92c2e0b167ae1400650380 ]

The hclge/hclgevf and hns3 module can be unloaded independently,
when hclge/hclgevf unloaded firstly, the ops of ae_dev should
be set to NULL, otherwise it will cause an use-after-free problem.

Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.c b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
index fa8b8506b120..738e01393b68 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
@@ -251,6 +251,7 @@ void hnae3_unregister_ae_algo(struct hnae3_ae_algo *ae_algo)
 
 		ae_algo->ops->uninit_ae_dev(ae_dev);
 		hnae3_set_bit(ae_dev->flag, HNAE3_DEV_INITED_B, 0);
+		ae_dev->ops = NULL;
 	}
 
 	list_del(&ae_algo->node);
@@ -351,6 +352,7 @@ void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev)
 
 		ae_algo->ops->uninit_ae_dev(ae_dev);
 		hnae3_set_bit(ae_dev->flag, HNAE3_DEV_INITED_B, 0);
+		ae_dev->ops = NULL;
 	}
 
 	list_del(&ae_dev->node);
-- 
2.20.1

[PATCH AUTOSEL 5.2 072/249] net: stmmac: dwmac4: fix flow control issue

[Sasha Levin]

From: Biao Huang <biao.huang@mediatek.com>

[ Upstream commit ee326fd01e79dfa42014d55931260b68b9fa3273 ]

Current dwmac4_flow_ctrl will not clear
GMAC_RX_FLOW_CTRL_RFE/GMAC_RX_FLOW_CTRL_RFE bits,
so MAC hw will keep flow control on although expecting
flow control off by ethtool. Add codes to fix it.

Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 206170d0bf81..e3850938cf2f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -474,8 +474,9 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
 	if (fc & FLOW_RX) {
 		pr_debug("\tReceive Flow-Control ON\n");
 		flow |= GMAC_RX_FLOW_CTRL_RFE;
-		writel(flow, ioaddr + GMAC_RX_FLOW_CTRL);
 	}
+	writel(flow, ioaddr + GMAC_RX_FLOW_CTRL);
+
 	if (fc & FLOW_TX) {
 		pr_debug("\tTransmit Flow-Control ON\n");
 
@@ -483,7 +484,7 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
 			pr_debug("\tduplex mode: PAUSE %d\n", pause_time);
 
 		for (queue = 0; queue < tx_cnt; queue++) {
-			flow |= GMAC_TX_FLOW_CTRL_TFE;
+			flow = GMAC_TX_FLOW_CTRL_TFE;
 
 			if (duplex)
 				flow |=
@@ -491,6 +492,9 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
 
 			writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(queue));
 		}
+	} else {
+		for (queue = 0; queue < tx_cnt; queue++)
+			writel(0, ioaddr + GMAC_QX_TX_FLOW_CTRL(queue));
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 073/249] net: stmmac: modify default value of tx-frames

[Sasha Levin]

From: Biao Huang <biao.huang@mediatek.com>

[ Upstream commit d2facb4b3983425f6776c24dd678a82dbe673773 ]

the default value of tx-frames is 25, it's too late when
passing tstamp to stack, then the ptp4l will fail:

ptp4l -i eth0 -f gPTP.cfg -m
ptp4l: selected /dev/ptp0 as PTP clock
ptp4l: port 1: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 0: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 1: link up
ptp4l: timed out while polling for tx timestamp
ptp4l: increasing tx_timestamp_timeout may correct this issue,
       but it is likely caused by a driver bug
ptp4l: port 1: send peer delay response failed
ptp4l: port 1: LISTENING to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED)

ptp4l tests pass when changing the tx-frames from 25 to 1 with
ethtool -C option.
It should be fine to set tx-frames default value to 1, so ptp4l will pass
by default.

Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index ceb0d23f5041..c265cc5770e8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -251,7 +251,7 @@ struct stmmac_safety_stats {
 #define STMMAC_COAL_TX_TIMER	1000
 #define STMMAC_MAX_COAL_TX_TICK	100000
 #define STMMAC_TX_MAX_FRAMES	256
-#define STMMAC_TX_FRAMES	25
+#define STMMAC_TX_FRAMES	1
 
 /* Packets types */
 enum packets_types {
-- 
2.20.1

[PATCH AUTOSEL 5.2 075/249] net: fec: Do not use netdev messages too early

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit a19a0582363b9a5f8ba812f34f1b8df394898780 ]

When a valid MAC address is not found the current messages
are shown:

fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: aa:9f:25:eb:7e:aa

Since the network device has not been registered at this point, it is better
to use dev_err()/dev_info() instead, which will provide cleaner log
messages like these:

fec 2188000.ethernet: Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet: Using random MAC address: aa:9f:25:eb:7e:aa

Tested on a imx6dl-pico-pi board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 38f10f7dcbc3..831bb709e783 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1689,10 +1689,10 @@ static void fec_get_mac(struct net_device *ndev)
 	 */
 	if (!is_valid_ether_addr(iap)) {
 		/* Report it and use a random ethernet address instead */
-		netdev_err(ndev, "Invalid MAC address: %pM\n", iap);
+		dev_err(&fep->pdev->dev, "Invalid MAC address: %pM\n", iap);
 		eth_hw_addr_random(ndev);
-		netdev_info(ndev, "Using random MAC address: %pM\n",
-			    ndev->dev_addr);
+		dev_info(&fep->pdev->dev, "Using random MAC address: %pM\n",
+			 ndev->dev_addr);
 		return;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 076/249] net: axienet: Fix race condition causing TX hang

[Sasha Levin]

From: Robert Hancock <hancock@sedsystems.ca>

[ Upstream commit 7de44285c1f69ccfbe8be1d6a16fcd956681fee6 ]

It is possible that the interrupt handler fires and frees up space in
the TX ring in between checking for sufficient TX ring space and
stopping the TX queue in axienet_start_xmit. If this happens, the
queue wake from the interrupt handler will occur before the queue is
stopped, causing a lost wakeup and the adapter's transmit hanging.

To avoid this, after stopping the queue, check again whether there is
sufficient space in the TX ring. If so, wake up the queue again.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 20 ++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 831967f6eff8..65c16772e589 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -615,6 +615,10 @@ static void axienet_start_xmit_done(struct net_device *ndev)
 
 	ndev->stats.tx_packets += packets;
 	ndev->stats.tx_bytes += size;
+
+	/* Matches barrier in axienet_start_xmit */
+	smp_mb();
+
 	netif_wake_queue(ndev);
 }
 
@@ -670,9 +674,19 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
 
 	if (axienet_check_tx_bd_space(lp, num_frag)) {
-		if (!netif_queue_stopped(ndev))
-			netif_stop_queue(ndev);
-		return NETDEV_TX_BUSY;
+		if (netif_queue_stopped(ndev))
+			return NETDEV_TX_BUSY;
+
+		netif_stop_queue(ndev);
+
+		/* Matches barrier in axienet_start_xmit_done */
+		smp_mb();
+
+		/* Space might have just been freed - check again */
+		if (axienet_check_tx_bd_space(lp, num_frag))
+			return NETDEV_TX_BUSY;
+
+		netif_wake_queue(ndev);
 	}
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 079/249] net: sfp: add mutex to prevent concurrent state checks

[Sasha Levin]

From: Robert Hancock <hancock@sedsystems.ca>

[ Upstream commit 2158e856f56bb762ef90f3ec244d41a519826f75 ]

sfp_check_state can potentially be called by both a threaded IRQ handler
and delayed work. If it is concurrently called, it could result in
incorrect state management. Add a st_mutex to protect the state - this
lock gets taken outside of code that checks and handle state changes, and
the existing sm_mutex nests inside of it.

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/sfp.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 71812be0ac64..b6efd2d41dce 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -186,10 +186,11 @@ struct sfp {
 	struct gpio_desc *gpio[GPIO_MAX];
 
 	bool attached;
+	struct mutex st_mutex;			/* Protects state */
 	unsigned int state;
 	struct delayed_work poll;
 	struct delayed_work timeout;
-	struct mutex sm_mutex;
+	struct mutex sm_mutex;			/* Protects state machine */
 	unsigned char sm_mod_state;
 	unsigned char sm_dev_state;
 	unsigned short sm_state;
@@ -1719,6 +1720,7 @@ static void sfp_check_state(struct sfp *sfp)
 {
 	unsigned int state, i, changed;
 
+	mutex_lock(&sfp->st_mutex);
 	state = sfp_get_state(sfp);
 	changed = state ^ sfp->state;
 	changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
@@ -1744,6 +1746,7 @@ static void sfp_check_state(struct sfp *sfp)
 		sfp_sm_event(sfp, state & SFP_F_LOS ?
 				SFP_E_LOS_HIGH : SFP_E_LOS_LOW);
 	rtnl_unlock();
+	mutex_unlock(&sfp->st_mutex);
 }
 
 static irqreturn_t sfp_irq(int irq, void *data)
@@ -1774,6 +1777,7 @@ static struct sfp *sfp_alloc(struct device *dev)
 	sfp->dev = dev;
 
 	mutex_init(&sfp->sm_mutex);
+	mutex_init(&sfp->st_mutex);
 	INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
 	INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 080/249] netfilter: ipset: fix a missing check of nla_parse

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit f4f5748bfec94cf418e49bf05f0c81a1b9ebc950 ]

When nla_parse fails, we should not use the results (the first
argument). The fix checks if it fails, and if so, returns its error code
upstream.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipset/ip_set_core.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 3cdf171cd468..16afa0df4004 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -1541,10 +1541,14 @@ call_ad(struct sock *ctnl, struct sk_buff *skb, struct ip_set *set,
 		memcpy(&errmsg->msg, nlh, nlh->nlmsg_len);
 		cmdattr = (void *)&errmsg->msg + min_len;
 
-		nla_parse_deprecated(cda, IPSET_ATTR_CMD_MAX, cmdattr,
-				     nlh->nlmsg_len - min_len,
-				     ip_set_adt_policy, NULL);
+		ret = nla_parse_deprecated(cda, IPSET_ATTR_CMD_MAX, cmdattr,
+					   nlh->nlmsg_len - min_len,
+					   ip_set_adt_policy, NULL);
 
+		if (ret) {
+			nlmsg_free(skb2);
+			return ret;
+		}
 		errline = nla_data(cda[IPSET_ATTR_LINENO]);
 
 		*errline = lineno;
-- 
2.20.1

[PATCH AUTOSEL 5.2 081/249] ipset: Fix memory accounting for hash types on resize

[Sasha Levin]

From: Stefano Brivio <sbrivio@redhat.com>

[ Upstream commit 11921796f4799ca9c61c4b22cc54d84aa69f8a35 ]

If a fresh array block is allocated during resize, the current in-memory
set size should be increased by the size of the block, not replaced by it.

Before the fix, adding entries to a hash set type, leading to a table
resize, caused an inconsistent memory size to be reported. This becomes
more obvious when swapping sets with similar sizes:

  # cat hash_ip_size.sh
  #!/bin/sh
  FAIL_RETRIES=10

  tries=0
  while [ ${tries} -lt ${FAIL_RETRIES} ]; do
  	ipset create t1 hash:ip
  	for i in `seq 1 4345`; do
  		ipset add t1 1.2.$((i / 255)).$((i % 255))
  	done
  	t1_init="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"

  	ipset create t2 hash:ip
  	for i in `seq 1 4360`; do
  		ipset add t2 1.2.$((i / 255)).$((i % 255))
  	done
  	t2_init="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"

  	ipset swap t1 t2
  	t1_swap="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"
  	t2_swap="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"

  	ipset destroy t1
  	ipset destroy t2
  	tries=$((tries + 1))

  	if [ ${t1_init} -lt 10000 ] || [ ${t2_init} -lt 10000 ]; then
  		echo "FAIL after ${tries} tries:"
  		echo "T1 size ${t1_init}, after swap ${t1_swap}"
  		echo "T2 size ${t2_init}, after swap ${t2_swap}"
  		exit 1
  	fi
  done
  echo "PASS"
  # echo -n 'func hash_ip4_resize +p' > /sys/kernel/debug/dynamic_debug/control
  # ./hash_ip_size.sh
  [ 2035.018673] attempt to resize set t1 from 10 to 11, t 00000000fe6551fa
  [ 2035.078583] set t1 resized from 10 (00000000fe6551fa) to 11 (00000000172a0163)
  [ 2035.080353] Table destroy by resize 00000000fe6551fa
  FAIL after 4 tries:
  T1 size 9064, after swap 71128
  T2 size 71128, after swap 9064

Reported-by: NOYB <JunkYardMail1@Frontier.com>
Fixes: 9e41f26a505c ("netfilter: ipset: Count non-static extension memory for userspace")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipset/ip_set_hash_gen.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h
index 10f619625abd..175f8fedcfaf 100644
--- a/net/netfilter/ipset/ip_set_hash_gen.h
+++ b/net/netfilter/ipset/ip_set_hash_gen.h
@@ -622,7 +622,7 @@ mtype_resize(struct ip_set *set, bool retried)
 					goto cleanup;
 				}
 				m->size = AHASH_INIT_SIZE;
-				extsize = ext_size(AHASH_INIT_SIZE, dsize);
+				extsize += ext_size(AHASH_INIT_SIZE, dsize);
 				RCU_INIT_POINTER(hbucket(t, key), m);
 			} else if (m->pos >= m->size) {
 				struct hbucket *ht;
-- 
2.20.1

[PATCH AUTOSEL 5.2 085/249] selftests/bpf : clean up feature/ when make clean

[Sasha Levin]

From: Hechao Li <hechaol@fb.com>

[ Upstream commit 89cceaa939171fafa153d4bf637b39e396bbd785 ]

An error "implicit declaration of function 'reallocarray'" can be thrown
with the following steps:

$ cd tools/testing/selftests/bpf
$ make clean && make CC=<Path to GCC 4.8.5>
$ make clean && make CC=<Path to GCC 7.x>

The cause is that the feature folder generated by GCC 4.8.5 is not
removed, leaving feature-reallocarray being 1, which causes reallocarray
not defined when re-compliing with GCC 7.x. This diff adds feature
folder to EXTRA_CLEAN to avoid this problem.

v2: Rephrase the commit message.

Signed-off-by: Hechao Li <hechaol@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index e36356e2377e..1c9511262947 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -275,4 +275,5 @@ $(OUTPUT)/verifier/tests.h: $(VERIFIER_TESTS_DIR) $(VERIFIER_TEST_FILES)
 		 ) > $(VERIFIER_TESTS_H))
 
 EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(ALU32_BUILD_DIR) \
-	$(VERIFIER_TESTS_H) $(PROG_TESTS_H) $(MAP_TESTS_H)
+	$(VERIFIER_TESTS_H) $(PROG_TESTS_H) $(MAP_TESTS_H) \
+	feature
-- 
2.20.1

[PATCH AUTOSEL 5.2 095/249] bpf: silence warning messages in core

[Sasha Levin]

From: Valdis Klētnieks <valdis.kletnieks@vt.edu>

[ Upstream commit aee450cbe482a8c2f6fa5b05b178ef8b8ff107ca ]

Compiling kernel/bpf/core.c with W=1 causes a flood of warnings:

kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init]
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~
kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]')
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~

98 copies of the above.

The attached patch silences the warnings, because we *know* we're overwriting
the default initializer. That leaves bpf/core.c with only 6 other warnings,
which become more visible in comparison.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/bpf/Makefile b/kernel/bpf/Makefile
index 4c2fa3ac56f6..29d781061cd5 100644
--- a/kernel/bpf/Makefile
+++ b/kernel/bpf/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y := core.o
+CFLAGS_core.o += $(call cc-disable-warning, override-init)
 
 obj-$(CONFIG_BPF_SYSCALL) += syscall.o verifier.o inode.o helpers.o tnum.o
 obj-$(CONFIG_BPF_SYSCALL) += hashtab.o arraymap.o percpu_freelist.o bpf_lru_list.o lpm_trie.o map_in_map.o
-- 
2.20.1

[PATCH AUTOSEL 5.2 104/249] qed: iWARP - Fix tc for MPA ll2 connection

[Sasha Levin]

From: Michal Kalderon <michal.kalderon@marvell.com>

[ Upstream commit cb94d52b93c74fe1f2595734fabeda9f8ae891ee ]

The driver needs to assign a lossless traffic class for the MPA ll2
connection to ensure no packets are dropped when returning from the
driver as they will never be re-transmitted by the peer.

Fixes: ae3488ff37dc ("qed: Add ll2 connection for processing unaligned MPA packets")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index ded556b7bab5..eeea8683d99b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -2708,6 +2708,8 @@ qed_iwarp_ll2_start(struct qed_hwfn *p_hwfn,
 	data.input.rx_num_desc = n_ooo_bufs * 2;
 	data.input.tx_num_desc = data.input.rx_num_desc;
 	data.input.tx_max_bds_per_packet = QED_IWARP_MAX_BDS_PER_FPDU;
+	data.input.tx_tc = PKT_LB_TC;
+	data.input.tx_dest = QED_LL2_TX_DEST_LB;
 	data.p_connection_handle = &iwarp_info->ll2_mpa_handle;
 	data.input.secondary_queue = true;
 	data.cbs = &cbs;
-- 
2.20.1

[PATCH AUTOSEL 5.2 105/249] net: hns3: fix for dereferencing before null checking

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 757188005f905664b0186b88cf26a7e844190a63 ]

The netdev is dereferenced before null checking in the function
hns3_setup_tc.

This patch moves the dereferencing after the null checking.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 5611b990ac34..d18ad7b48a31 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1514,12 +1514,12 @@ static void hns3_nic_get_stats64(struct net_device *netdev,
 static int hns3_setup_tc(struct net_device *netdev, void *type_data)
 {
 	struct tc_mqprio_qopt_offload *mqprio_qopt = type_data;
-	struct hnae3_handle *h = hns3_get_handle(netdev);
-	struct hnae3_knic_private_info *kinfo = &h->kinfo;
 	u8 *prio_tc = mqprio_qopt->qopt.prio_tc_map;
+	struct hnae3_knic_private_info *kinfo;
 	u8 tc = mqprio_qopt->qopt.num_tc;
 	u16 mode = mqprio_qopt->mode;
 	u8 hw = mqprio_qopt->qopt.hw;
+	struct hnae3_handle *h;
 
 	if (!((hw == TC_MQPRIO_HW_OFFLOAD_TCS &&
 	       mode == TC_MQPRIO_MODE_CHANNEL) || (!hw && tc == 0)))
@@ -1531,6 +1531,9 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data)
 	if (!netdev)
 		return -EINVAL;
 
+	h = hns3_get_handle(netdev);
+	kinfo = &h->kinfo;
+
 	return (kinfo->dcb_ops && kinfo->dcb_ops->setup_tc) ?
 		kinfo->dcb_ops->setup_tc(h, tc, prio_tc) : -EOPNOTSUPP;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 106/249] net: hns3: fix for skb leak when doing selftest

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 8f9eed1a8791b83eb1c54c261d68424717e4111e ]

If hns3_nic_net_xmit does not return NETDEV_TX_BUSY when doing
a loopback selftest, the skb is not freed in hns3_clean_tx_ring
or hns3_nic_net_xmit, which causes skb not freed problem.

This patch fixes it by freeing skb when hns3_nic_net_xmit does
not return NETDEV_TX_OK.

Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index d1588ea6132c..24fce343e7fc 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -243,11 +243,13 @@ static int hns3_lp_run_test(struct net_device *ndev, enum hnae3_loop mode)
 
 		skb_get(skb);
 		tx_ret = hns3_nic_net_xmit(skb, ndev);
-		if (tx_ret == NETDEV_TX_OK)
+		if (tx_ret == NETDEV_TX_OK) {
 			good_cnt++;
-		else
+		} else {
+			kfree_skb(skb);
 			netdev_err(ndev, "hns3_lb_run_test xmit failed: %d\n",
 				   tx_ret);
+		}
 	}
 	if (good_cnt != HNS3_NIC_LB_TEST_PKT_NUM) {
 		ret_val = HNS3_NIC_LB_TEST_TX_CNT_ERR;
-- 
2.20.1

[PATCH AUTOSEL 5.2 107/249] net: hns3: delay ring buffer clearing during reset

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 3a30964a2eef6aabd3ab18b979ea0eacf1147731 ]

The driver may not be able to disable the ring through firmware
when downing the netdev during reset process, which may cause
hardware accessing freed buffer problem.

This patch delays the ring buffer clearing to reset uninit
process because hardware will not access the ring buffer after
hardware reset is completed.

Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index d18ad7b48a31..e0d3e2f9801d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -28,7 +28,7 @@
 #define hns3_tx_bd_count(S)	DIV_ROUND_UP(S, HNS3_MAX_BD_SIZE)
 
 static void hns3_clear_all_ring(struct hnae3_handle *h);
-static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h);
+static void hns3_force_clear_all_ring(struct hnae3_handle *h);
 static void hns3_remove_hw_addr(struct net_device *netdev);
 
 static const char hns3_driver_name[] = "hns3";
@@ -491,7 +491,12 @@ static void hns3_nic_net_down(struct net_device *netdev)
 	/* free irq resources */
 	hns3_nic_uninit_irq(priv);
 
-	hns3_clear_all_ring(priv->ae_handle);
+	/* delay ring buffer clearing to hns3_reset_notify_uninit_enet
+	 * during reset process, because driver may not be able
+	 * to disable the ring through firmware when downing the netdev.
+	 */
+	if (!hns3_nic_resetting(netdev))
+		hns3_clear_all_ring(priv->ae_handle);
 }
 
 static int hns3_nic_net_stop(struct net_device *netdev)
@@ -3883,7 +3888,7 @@ static void hns3_client_uninit(struct hnae3_handle *handle, bool reset)
 
 	hns3_del_all_fd_rules(netdev, true);
 
-	hns3_force_clear_all_rx_ring(handle);
+	hns3_force_clear_all_ring(handle);
 
 	hns3_uninit_phy(netdev);
 
@@ -4055,7 +4060,7 @@ static void hns3_force_clear_rx_ring(struct hns3_enet_ring *ring)
 	}
 }
 
-static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h)
+static void hns3_force_clear_all_ring(struct hnae3_handle *h)
 {
 	struct net_device *ndev = h->kinfo.netdev;
 	struct hns3_nic_priv *priv = netdev_priv(ndev);
@@ -4063,6 +4068,9 @@ static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h)
 	u32 i;
 
 	for (i = 0; i < h->kinfo.num_tqps; i++) {
+		ring = priv->ring_data[i].ring;
+		hns3_clear_tx_ring(ring);
+
 		ring = priv->ring_data[i + h->kinfo.num_tqps].ring;
 		hns3_force_clear_rx_ring(ring);
 	}
@@ -4297,7 +4305,8 @@ static int hns3_reset_notify_uninit_enet(struct hnae3_handle *handle)
 		return 0;
 	}
 
-	hns3_force_clear_all_rx_ring(handle);
+	hns3_clear_all_ring(handle);
+	hns3_force_clear_all_ring(handle);
 
 	hns3_nic_uninit_vector_data(priv);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 110/249] xfrm: fix sa selector validation

[Sasha Levin]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit b8d6d0079757cbd1b69724cfd1c08e2171c68cee ]

After commit b38ff4075a80, the following command does not work anymore:
$ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \
  mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \
  'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4

In fact, the selector is not mandatory, allow the user to provide an empty
selector.

Fixes: b38ff4075a80 ("xfrm: Fix xfrm sel prefix length validation")
CC: Anirudh Gupta <anirudh.gupta@sophos.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 76ad7e201626..b88ba45ff1ac 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -167,6 +167,9 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 	}
 
 	switch (p->sel.family) {
+	case AF_UNSPEC:
+		break;
+
 	case AF_INET:
 		if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
 			goto out;
-- 
2.20.1

[PATCH AUTOSEL 5.2 119/249] vhost_net: disable zerocopy by default

[Sasha Levin]

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit 098eadce3c622c07b328d0a43dda379b38cf7c5e ]

Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.

It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.

[1] https://patchwork.kernel.org/patch/3787671/

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index d57ebdd616d9..247e5585af5d 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -35,7 +35,7 @@
 
 #include "vhost.h"
 
-static int experimental_zcopytx = 1;
+static int experimental_zcopytx = 0;
 module_param(experimental_zcopytx, int, 0444);
 MODULE_PARM_DESC(experimental_zcopytx, "Enable Zero Copy TX;"
 		                       " 1 -Enable; 0 - Disable");
-- 
2.20.1

[PATCH AUTOSEL 5.2 120/249] iavf: allow null RX descriptors

[Sasha Levin]

From: Mitch Williams <mitch.a.williams@intel.com>

[ Upstream commit efa14c3985828da3163f5372137cb64d992b0f79 ]

In some circumstances, the hardware can hand us a null receive
descriptor, with no data attached but otherwise valid. Unfortunately,
the driver was ill-equipped to handle such an event, and would stop
processing packets at that point.

To fix this, use the Descriptor Done bit instead of the size to
determine whether or not a descriptor is ready to be processed. Add some
checks to allow for unused buffers.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_txrx.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.c b/drivers/net/ethernet/intel/iavf/iavf_txrx.c
index 06d1509d57f7..c97b9ecf026a 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_txrx.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.c
@@ -1236,6 +1236,9 @@ static void iavf_add_rx_frag(struct iavf_ring *rx_ring,
 	unsigned int truesize = SKB_DATA_ALIGN(size + iavf_rx_offset(rx_ring));
 #endif
 
+	if (!size)
+		return;
+
 	skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page,
 			rx_buffer->page_offset, size, truesize);
 
@@ -1260,6 +1263,9 @@ static struct iavf_rx_buffer *iavf_get_rx_buffer(struct iavf_ring *rx_ring,
 {
 	struct iavf_rx_buffer *rx_buffer;
 
+	if (!size)
+		return NULL;
+
 	rx_buffer = &rx_ring->rx_bi[rx_ring->next_to_clean];
 	prefetchw(rx_buffer->page);
 
@@ -1299,6 +1305,8 @@ static struct sk_buff *iavf_construct_skb(struct iavf_ring *rx_ring,
 	unsigned int headlen;
 	struct sk_buff *skb;
 
+	if (!rx_buffer)
+		return NULL;
 	/* prefetch first cache line of first page */
 	prefetch(va);
 #if L1_CACHE_BYTES < 128
@@ -1363,6 +1371,8 @@ static struct sk_buff *iavf_build_skb(struct iavf_ring *rx_ring,
 #endif
 	struct sk_buff *skb;
 
+	if (!rx_buffer)
+		return NULL;
 	/* prefetch first cache line of first page */
 	prefetch(va);
 #if L1_CACHE_BYTES < 128
@@ -1398,6 +1408,9 @@ static struct sk_buff *iavf_build_skb(struct iavf_ring *rx_ring,
 static void iavf_put_rx_buffer(struct iavf_ring *rx_ring,
 			       struct iavf_rx_buffer *rx_buffer)
 {
+	if (!rx_buffer)
+		return;
+
 	if (iavf_can_reuse_rx_page(rx_buffer)) {
 		/* hand second half of page back to the ring */
 		iavf_reuse_rx_page(rx_ring, rx_buffer);
@@ -1496,11 +1509,12 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
 		 * verified the descriptor has been written back.
 		 */
 		dma_rmb();
+#define IAVF_RXD_DD BIT(IAVF_RX_DESC_STATUS_DD_SHIFT)
+		if (!iavf_test_staterr(rx_desc, IAVF_RXD_DD))
+			break;
 
 		size = (qword & IAVF_RXD_QW1_LENGTH_PBUF_MASK) >>
 		       IAVF_RXD_QW1_LENGTH_PBUF_SHIFT;
-		if (!size)
-			break;
 
 		iavf_trace(clean_rx_irq, rx_ring, rx_desc, skb);
 		rx_buffer = iavf_get_rx_buffer(rx_ring, size);
@@ -1516,7 +1530,8 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
 		/* exit if we failed to retrieve a buffer */
 		if (!skb) {
 			rx_ring->rx_stats.alloc_buff_failed++;
-			rx_buffer->pagecnt_bias++;
+			if (rx_buffer)
+				rx_buffer->pagecnt_bias++;
 			break;
 		}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 124/249] bpf: fix callees pruning callers

[Sasha Levin]

From: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit eea1c227b9e9bad295e8ef984004a9acf12bb68c ]

The commit 7640ead93924 partially resolved the issue of callees
incorrectly pruning the callers.
With introduction of bounded loops and jmps_processed heuristic
single verifier state may contain multiple branches and calls.
It's possible that new verifier state (for future pruning) will be
allocated inside callee. Then callee will exit (still within the same
verifier state). It will go back to the caller and there R6-R9 registers
will be read and will trigger mark_reg_read. But the reg->live for all frames
but the top frame is not set to LIVE_NONE. Hence mark_reg_read will fail
to propagate liveness into parent and future walking will incorrectly
conclude that the states are equivalent because LIVE_READ is not set.
In other words the rule for parent/live should be:
whenever register parentage chain is set the reg->live should be set to LIVE_NONE.
is_state_visited logic already follows this rule for spilled registers.

Fixes: 7640ead93924 ("bpf: verifier: make sure callees don't prune with caller differences")
Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index a5c369e60343..11528bdaa9dc 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6456,17 +6456,18 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
 	 * the state of the call instruction (with WRITTEN set), and r0 comes
 	 * from callee with its full parentage chain, anyway.
 	 */
-	for (j = 0; j <= cur->curframe; j++)
-		for (i = j < cur->curframe ? BPF_REG_6 : 0; i < BPF_REG_FP; i++)
-			cur->frame[j]->regs[i].parent = &new->frame[j]->regs[i];
 	/* clear write marks in current state: the writes we did are not writes
 	 * our child did, so they don't screen off its reads from us.
 	 * (There are no read marks in current state, because reads always mark
 	 * their parent and current state never has children yet.  Only
 	 * explored_states can get read marks.)
 	 */
-	for (i = 0; i < BPF_REG_FP; i++)
-		cur->frame[cur->curframe]->regs[i].live = REG_LIVE_NONE;
+	for (j = 0; j <= cur->curframe; j++) {
+		for (i = j < cur->curframe ? BPF_REG_6 : 0; i < BPF_REG_FP; i++)
+			cur->frame[j]->regs[i].parent = &new->frame[j]->regs[i];
+		for (i = 0; i < BPF_REG_FP; i++)
+			cur->frame[j]->regs[i].live = REG_LIVE_NONE;
+	}
 
 	/* all stack frames are accessible from callee, clear them all */
 	for (j = 0; j <= cur->curframe; j++) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 127/249] net: netsec: initialize tx ring on ndo_open

[Sasha Levin]

From: Ilias Apalodimas <ilias.apalodimas@linaro.org>

[ Upstream commit 39e3622edeffa63c2871153d8743c5825b139968 ]

Since we changed the Tx ring handling and now depends on bit31 to figure
out the owner of the descriptor, we should initialize this every time
the device goes down-up instead of doing it once on driver init. If the
value is not correctly initialized the device won't have any available
descriptors

Changes since v1:
- Typo fixes

Fixes: 35e07d234739 ("net: socionext: remove mmio reads on Tx")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/socionext/netsec.c | 32 ++++++++++++++-----------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index cba5881b2746..a10ef700f16d 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -1029,7 +1029,6 @@ static void netsec_free_dring(struct netsec_priv *priv, int id)
 static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
 {
 	struct netsec_desc_ring *dring = &priv->desc_ring[id];
-	int i;
 
 	dring->vaddr = dma_alloc_coherent(priv->dev, DESC_SZ * DESC_NUM,
 					  &dring->desc_dma, GFP_KERNEL);
@@ -1040,19 +1039,6 @@ static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
 	if (!dring->desc)
 		goto err;
 
-	if (id == NETSEC_RING_TX) {
-		for (i = 0; i < DESC_NUM; i++) {
-			struct netsec_de *de;
-
-			de = dring->vaddr + (DESC_SZ * i);
-			/* de->attr is not going to be accessed by the NIC
-			 * until netsec_set_tx_de() is called.
-			 * No need for a dma_wmb() here
-			 */
-			de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD;
-		}
-	}
-
 	return 0;
 err:
 	netsec_free_dring(priv, id);
@@ -1060,6 +1046,23 @@ static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
 	return -ENOMEM;
 }
 
+static void netsec_setup_tx_dring(struct netsec_priv *priv)
+{
+	struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_TX];
+	int i;
+
+	for (i = 0; i < DESC_NUM; i++) {
+		struct netsec_de *de;
+
+		de = dring->vaddr + (DESC_SZ * i);
+		/* de->attr is not going to be accessed by the NIC
+		 * until netsec_set_tx_de() is called.
+		 * No need for a dma_wmb() here
+		 */
+		de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD;
+	}
+}
+
 static int netsec_setup_rx_dring(struct netsec_priv *priv)
 {
 	struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_RX];
@@ -1361,6 +1364,7 @@ static int netsec_netdev_open(struct net_device *ndev)
 
 	pm_runtime_get_sync(priv->dev);
 
+	netsec_setup_tx_dring(priv);
 	ret = netsec_setup_rx_dring(priv);
 	if (ret) {
 		netif_err(priv, probe, priv->ndev,
-- 
2.20.1

[PATCH AUTOSEL 5.2 141/249] ipsec: select crypto ciphers for xfrm_algo

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 597179b0ba550bd83fab1a9d57c42a9343c58514 ]

kernelci.org reports failed builds on arc because of what looks
like an old missed 'select' statement:

net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs':
xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash'

I don't see this in randconfig builds on other architectures, but
it's fairly clear we want to select the hash code for it, like we
do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER
is also required even though it has not popped up in build tests.

Fixes: 17bc19702221 ("ipsec: Use skcipher and ahash when probing algorithms")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig
index c967fc3c38c8..51bb6018f3bf 100644
--- a/net/xfrm/Kconfig
+++ b/net/xfrm/Kconfig
@@ -15,6 +15,8 @@ config XFRM_ALGO
 	tristate
 	select XFRM
 	select CRYPTO
+	select CRYPTO_HASH
+	select CRYPTO_BLKCIPHER
 
 if INET
 config XFRM_USER
-- 
2.20.1

[PATCH AUTOSEL 5.2 143/249] ipvs: defer hook registration to avoid leaks

[Sasha Levin]

From: Julian Anastasov <ja@ssi.bg>

[ Upstream commit cf47a0b882a4e5f6b34c7949d7b293e9287f1972 ]

syzkaller reports for memory leak when registering hooks [1]

As we moved the nf_unregister_net_hooks() call into
__ip_vs_dev_cleanup(), defer the nf_register_net_hooks()
call, so that hooks are allocated and freed from same
pernet_operations (ipvs_core_dev_ops).

[1]
BUG: memory leak
unreferenced object 0xffff88810acd8a80 (size 96):
 comm "syz-executor073", pid 7254, jiffies 4294950560 (age 22.250s)
 hex dump (first 32 bytes):
   02 00 00 00 00 00 00 00 50 8b bb 82 ff ff ff ff  ........P.......
   00 00 00 00 00 00 00 00 00 77 bb 82 ff ff ff ff  .........w......
 backtrace:
   [<0000000013db61f1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
   [<0000000013db61f1>] slab_post_alloc_hook mm/slab.h:439 [inline]
   [<0000000013db61f1>] slab_alloc_node mm/slab.c:3269 [inline]
   [<0000000013db61f1>] kmem_cache_alloc_node_trace+0x15b/0x2a0 mm/slab.c:3597
   [<000000001a27307d>] __do_kmalloc_node mm/slab.c:3619 [inline]
   [<000000001a27307d>] __kmalloc_node+0x38/0x50 mm/slab.c:3627
   [<0000000025054add>] kmalloc_node include/linux/slab.h:590 [inline]
   [<0000000025054add>] kvmalloc_node+0x4a/0xd0 mm/util.c:431
   [<0000000050d1bc00>] kvmalloc include/linux/mm.h:637 [inline]
   [<0000000050d1bc00>] kvzalloc include/linux/mm.h:645 [inline]
   [<0000000050d1bc00>] allocate_hook_entries_size+0x3b/0x60 net/netfilter/core.c:61
   [<00000000e8abe142>] nf_hook_entries_grow+0xae/0x270 net/netfilter/core.c:128
   [<000000004b94797c>] __nf_register_net_hook+0x9a/0x170 net/netfilter/core.c:337
   [<00000000d1545cbc>] nf_register_net_hook+0x34/0xc0 net/netfilter/core.c:464
   [<00000000876c9b55>] nf_register_net_hooks+0x53/0xc0 net/netfilter/core.c:480
   [<000000002ea868e0>] __ip_vs_init+0xe8/0x170 net/netfilter/ipvs/ip_vs_core.c:2280
   [<000000002eb2d451>] ops_init+0x4c/0x140 net/core/net_namespace.c:130
   [<000000000284ec48>] setup_net+0xde/0x230 net/core/net_namespace.c:316
   [<00000000a70600fa>] copy_net_ns+0xf0/0x1e0 net/core/net_namespace.c:439
   [<00000000ff26c15e>] create_new_namespaces+0x141/0x2a0 kernel/nsproxy.c:107
   [<00000000b103dc79>] copy_namespaces+0xa1/0xe0 kernel/nsproxy.c:165
   [<000000007cc008a2>] copy_process.part.0+0x11fd/0x2150 kernel/fork.c:2035
   [<00000000c344af7c>] copy_process kernel/fork.c:1800 [inline]
   [<00000000c344af7c>] _do_fork+0x121/0x4f0 kernel/fork.c:2369

Reported-by: syzbot+722da59ccb264bc19910@syzkaller.appspotmail.com
Fixes: 719c7d563c17 ("ipvs: Fix use-after-free in ip_vs_in")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_core.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 7138556b206b..d5103a9eb302 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -2245,7 +2245,6 @@ static const struct nf_hook_ops ip_vs_ops[] = {
 static int __net_init __ip_vs_init(struct net *net)
 {
 	struct netns_ipvs *ipvs;
-	int ret;
 
 	ipvs = net_generic(net, ip_vs_net_id);
 	if (ipvs == NULL)
@@ -2277,17 +2276,11 @@ static int __net_init __ip_vs_init(struct net *net)
 	if (ip_vs_sync_net_init(ipvs) < 0)
 		goto sync_fail;
 
-	ret = nf_register_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
-	if (ret < 0)
-		goto hook_fail;
-
 	return 0;
 /*
  * Error handling
  */
 
-hook_fail:
-	ip_vs_sync_net_cleanup(ipvs);
 sync_fail:
 	ip_vs_conn_net_cleanup(ipvs);
 conn_fail:
@@ -2317,6 +2310,19 @@ static void __net_exit __ip_vs_cleanup(struct net *net)
 	net->ipvs = NULL;
 }
 
+static int __net_init __ip_vs_dev_init(struct net *net)
+{
+	int ret;
+
+	ret = nf_register_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
+	if (ret < 0)
+		goto hook_fail;
+	return 0;
+
+hook_fail:
+	return ret;
+}
+
 static void __net_exit __ip_vs_dev_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
@@ -2336,6 +2342,7 @@ static struct pernet_operations ipvs_core_ops = {
 };
 
 static struct pernet_operations ipvs_core_dev_ops = {
+	.init = __ip_vs_dev_init,
 	.exit = __ip_vs_dev_cleanup,
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 156/249] net: stmmac: sun8i: force select external PHY when no internal one

[Sasha Levin]

From: Icenowy Zheng <icenowy@aosc.io>

[ Upstream commit 0fec7e72ae1391bb2d7527efb54fe6ae88acabce ]

The PHY selection bit also exists on SoCs without an internal PHY; if it's
set to 1 (internal PHY, default value) then the MAC will not make use of
any PHY on such SoCs.

This problem appears when adapting for H6, which has no real internal PHY
(the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
connected via RMII interface at GPIO bank A).

Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
to address the problem of a wrong default value.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index a69c34f605b1..98a15ba8be9f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -884,6 +884,11 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 		 * address. No need to mask it again.
 		 */
 		reg |= 1 << H3_EPHY_ADDR_SHIFT;
+	} else {
+		/* For SoCs without internal PHY the PHY selection bit should be
+		 * set to 0 (external PHY).
+		 */
+		reg &= ~H3_EPHY_SELECT;
 	}
 
 	if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 157/249] rtlwifi: rtl8192cu: fix error handle when usb probe failed

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 6c0ed66f1a5b84e2a812c7c2d6571a5621bf3396 ]

rtl_usb_probe() must do error handle rtl_deinit_core() only if
rtl_init_core() is done, otherwise goto error_out2.

| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
| rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl8192cu: Chip version 0x10
| rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl_usb: Too few input end points found
| INFO: trying to register non-static key.
| the code is fine but needs lockdep annotation.
| turning off the locking correctness validator.
| CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
| Google 01/01/2011
| Workqueue: usb_hub_wq hub_event
| Call Trace:
|   __dump_stack lib/dump_stack.c:77 [inline]
|   dump_stack+0xe8/0x16e lib/dump_stack.c:113
|   assign_lock_key kernel/locking/lockdep.c:786 [inline]
|   register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095
|   __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582
|   lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211
|   __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
|   _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152
|   rtl_c2hcmd_launcher+0xd1/0x390
| drivers/net/wireless/realtek/rtlwifi/base.c:2344
|   rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574
|   rtl_usb_probe.cold+0x861/0xa70
| drivers/net/wireless/realtek/rtlwifi/usb.c:1093
|   usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361
|   really_probe+0x2da/0xb10 drivers/base/dd.c:509
|   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
|   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
|   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
|   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
|   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
|   device_add+0xad2/0x16e0 drivers/base/core.c:2106
|   usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021
|   generic_probe+0xa2/0xda drivers/usb/core/generic.c:210
|   usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266
|   really_probe+0x2da/0xb10 drivers/base/dd.c:509
|   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
|   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
|   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
|   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
|   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
|   device_add+0xad2/0x16e0 drivers/base/core.c:2106
|   usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534
|   hub_port_connect drivers/usb/core/hub.c:5089 [inline]
|   hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
|   port_event drivers/usb/core/hub.c:5350 [inline]
|   hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432
|   process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
|   worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
|   kthread+0x313/0x420 kernel/kthread.c:253
|   ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Reported-by: syzbot+1fcc5ef45175fc774231@syzkaller.appspotmail.com
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index e24fda5e9087..34d68dbf4b4c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1064,13 +1064,13 @@ int rtl_usb_probe(struct usb_interface *intf,
 	rtlpriv->cfg->ops->read_eeprom_info(hw);
 	err = _rtl_usb_init(hw);
 	if (err)
-		goto error_out;
+		goto error_out2;
 	rtl_usb_init_sw(hw);
 	/* Init mac80211 sw */
 	err = rtl_init_core(hw);
 	if (err) {
 		pr_err("Can't allocate sw for mac80211\n");
-		goto error_out;
+		goto error_out2;
 	}
 	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
 		pr_err("Can't init_sw_vars\n");
@@ -1091,6 +1091,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 
 error_out:
 	rtl_deinit_core(hw);
+error_out2:
 	_rtl_usb_io_handler_release(hw);
 	usb_put_dev(udev);
 	complete(&rtlpriv->firmware_loading_complete);
-- 
2.20.1

[PATCH AUTOSEL 5.2 158/249] mt7601u: do not schedule rx_tasklet when the device has been disconnected

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 4079e8ccabc3b6d1b503f2376123cb515d14921f ]

Do not schedule rx_tasklet when the usb dongle is disconnected.
Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb
can run concurrently with urb completion and we can unlink urbs from rx
ring in any order.
This patch fixes the common kernel warning reported when
the device is removed.

[   24.921354] usb 3-14: USB disconnect, device number 7
[   24.921593] ------------[ cut here ]------------
[   24.921594] RX urb mismatch
[   24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[   24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G           OE     4.19.31-041931-generic #201903231635
[   24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014
[   24.921782] Workqueue: usb_hub_wq hub_event
[   24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[   24.921800] RSP: 0018:ffff9bd9cfd03d08 EFLAGS: 00010086
[   24.921802] RAX: 0000000000000000 RBX: ffff9bd9bf043540 RCX: 0000000000000006
[   24.921803] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9bd9cfd16420
[   24.921804] RBP: ffff9bd9cfd03d28 R08: 0000000000000002 R09: 00000000000003a8
[   24.921805] R10: 0000002f485fca34 R11: 0000000000000000 R12: ffff9bd9bf043c1c
[   24.921806] R13: ffff9bd9c62fa3c0 R14: 0000000000000082 R15: 0000000000000000
[   24.921807] FS:  0000000000000000(0000) GS:ffff9bd9cfd00000(0000) knlGS:0000000000000000
[   24.921808] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.921808] CR2: 00007fb2648b0000 CR3: 0000000142c0a004 CR4: 00000000001606e0
[   24.921809] Call Trace:
[   24.921812]  <IRQ>
[   24.921819]  __usb_hcd_giveback_urb+0x8b/0x140
[   24.921821]  usb_hcd_giveback_urb+0xca/0xe0
[   24.921828]  xhci_giveback_urb_in_irq.isra.42+0x82/0xf0
[   24.921834]  handle_cmd_completion+0xe02/0x10d0
[   24.921837]  xhci_irq+0x274/0x4a0
[   24.921838]  xhci_msi_irq+0x11/0x20
[   24.921851]  __handle_irq_event_percpu+0x44/0x190
[   24.921856]  handle_irq_event_percpu+0x32/0x80
[   24.921861]  handle_irq_event+0x3b/0x5a
[   24.921867]  handle_edge_irq+0x80/0x190
[   24.921874]  handle_irq+0x20/0x30
[   24.921889]  do_IRQ+0x4e/0xe0
[   24.921891]  common_interrupt+0xf/0xf
[   24.921892]  </IRQ>
[   24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180
[   24.921354] usb 3-14: USB disconnect, device number 7

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt7601u/dma.c | 33 +++++++++++----------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index 66d60283e456..0faa3db6fde4 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -185,10 +185,23 @@ static void mt7601u_complete_rx(struct urb *urb)
 	struct mt7601u_rx_queue *q = &dev->rx_q;
 	unsigned long flags;
 
-	spin_lock_irqsave(&dev->rx_lock, flags);
+	/* do no schedule rx tasklet if urb has been unlinked
+	 * or the device has been removed
+	 */
+	switch (urb->status) {
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+	case -ENOENT:
+		return;
+	default:
+		dev_err_ratelimited(dev->dev, "rx urb failed: %d\n",
+				    urb->status);
+		/* fall through */
+	case 0:
+		break;
+	}
 
-	if (mt7601u_urb_has_error(urb))
-		dev_err(dev->dev, "Error: RX urb failed:%d\n", urb->status);
+	spin_lock_irqsave(&dev->rx_lock, flags);
 	if (WARN_ONCE(q->e[q->end].urb != urb, "RX urb mismatch"))
 		goto out;
 
@@ -355,19 +368,9 @@ int mt7601u_dma_enqueue_tx(struct mt7601u_dev *dev, struct sk_buff *skb,
 static void mt7601u_kill_rx(struct mt7601u_dev *dev)
 {
 	int i;
-	unsigned long flags;
 
-	spin_lock_irqsave(&dev->rx_lock, flags);
-
-	for (i = 0; i < dev->rx_q.entries; i++) {
-		int next = dev->rx_q.end;
-
-		spin_unlock_irqrestore(&dev->rx_lock, flags);
-		usb_poison_urb(dev->rx_q.e[next].urb);
-		spin_lock_irqsave(&dev->rx_lock, flags);
-	}
-
-	spin_unlock_irqrestore(&dev->rx_lock, flags);
+	for (i = 0; i < dev->rx_q.entries; i++)
+		usb_poison_urb(dev->rx_q.e[i].urb);
 }
 
 static int mt7601u_submit_rx_buf(struct mt7601u_dev *dev,
-- 
2.20.1

[PATCH AUTOSEL 5.2 160/249] mt7601u: fix possible memory leak when the device is disconnected

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 23377c200b2eb48a60d0f228b2a2e75ed6ee6060 ]

When the device is disconnected while passing traffic it is possible
to receive out of order urbs causing a memory leak since the skb linked
to the current tx urb is not removed. Fix the issue deallocating the skb
cleaning up the tx ring. Moreover this patch fixes the following kernel
warning

[   57.480771] usb 1-1: USB disconnect, device number 2
[   57.483451] ------------[ cut here ]------------
[   57.483462] TX urb mismatch
[   57.483481] WARNING: CPU: 1 PID: 32 at drivers/net/wireless/mediatek/mt7601u/dma.c:245 mt7601u_complete_tx+0x165/00
[   57.483483] Modules linked in:
[   57.483496] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.2.0-rc1+ #72
[   57.483498] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[   57.483502] Workqueue: usb_hub_wq hub_event
[   57.483507] RIP: 0010:mt7601u_complete_tx+0x165/0x1e0
[   57.483510] Code: 8b b5 10 04 00 00 8b 8d 14 04 00 00 eb 8b 80 3d b1 cb e1 00 00 75 9e 48 c7 c7 a4 ea 05 82 c6 05 f
[   57.483513] RSP: 0000:ffffc900000a0d28 EFLAGS: 00010092
[   57.483516] RAX: 000000000000000f RBX: ffff88802c0a62c0 RCX: ffffc900000a0c2c
[   57.483518] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff810a8371
[   57.483520] RBP: ffff88803ced6858 R08: 0000000000000000 R09: 0000000000000001
[   57.483540] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000046
[   57.483542] R13: ffff88802c0a6c88 R14: ffff88803baab540 R15: ffff88803a0cc078
[   57.483548] FS:  0000000000000000(0000) GS:ffff88803eb00000(0000) knlGS:0000000000000000
[   57.483550] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   57.483552] CR2: 000055e7f6780100 CR3: 0000000028c86000 CR4: 00000000000006a0
[   57.483554] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   57.483556] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   57.483559] Call Trace:
[   57.483561]  <IRQ>
[   57.483565]  __usb_hcd_giveback_urb+0x77/0xe0
[   57.483570]  xhci_giveback_urb_in_irq.isra.0+0x8b/0x140
[   57.483574]  handle_cmd_completion+0xf5b/0x12c0
[   57.483577]  xhci_irq+0x1f6/0x1810
[   57.483581]  ? lockdep_hardirqs_on+0x9e/0x180
[   57.483584]  ? _raw_spin_unlock_irq+0x24/0x30
[   57.483588]  __handle_irq_event_percpu+0x3a/0x260
[   57.483592]  handle_irq_event_percpu+0x1c/0x60
[   57.483595]  handle_irq_event+0x2f/0x4c
[   57.483599]  handle_edge_irq+0x7e/0x1a0
[   57.483603]  handle_irq+0x17/0x20
[   57.483607]  do_IRQ+0x54/0x110
[   57.483610]  common_interrupt+0xf/0xf
[   57.483612]  </IRQ>

Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt7601u/dma.c | 21 ++++++++++++++++-----
 drivers/net/wireless/mediatek/mt7601u/tx.c  |  4 ++--
 2 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index 0faa3db6fde4..f6a0454abe04 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -233,14 +233,25 @@ static void mt7601u_complete_tx(struct urb *urb)
 	struct sk_buff *skb;
 	unsigned long flags;
 
-	spin_lock_irqsave(&dev->tx_lock, flags);
+	switch (urb->status) {
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+	case -ENOENT:
+		return;
+	default:
+		dev_err_ratelimited(dev->dev, "tx urb failed: %d\n",
+				    urb->status);
+		/* fall through */
+	case 0:
+		break;
+	}
 
-	if (mt7601u_urb_has_error(urb))
-		dev_err(dev->dev, "Error: TX urb failed:%d\n", urb->status);
+	spin_lock_irqsave(&dev->tx_lock, flags);
 	if (WARN_ONCE(q->e[q->start].urb != urb, "TX urb mismatch"))
 		goto out;
 
 	skb = q->e[q->start].skb;
+	q->e[q->start].skb = NULL;
 	trace_mt_tx_dma_done(dev, skb);
 
 	__skb_queue_tail(&dev->tx_skb_done, skb);
@@ -440,10 +451,10 @@ static void mt7601u_free_tx_queue(struct mt7601u_tx_queue *q)
 {
 	int i;
 
-	WARN_ON(q->used);
-
 	for (i = 0; i < q->entries; i++)  {
 		usb_poison_urb(q->e[i].urb);
+		if (q->e[i].skb)
+			mt7601u_tx_status(q->dev, q->e[i].skb);
 		usb_free_urb(q->e[i].urb);
 	}
 }
diff --git a/drivers/net/wireless/mediatek/mt7601u/tx.c b/drivers/net/wireless/mediatek/mt7601u/tx.c
index 906e19c5f628..f3dff8319a4c 100644
--- a/drivers/net/wireless/mediatek/mt7601u/tx.c
+++ b/drivers/net/wireless/mediatek/mt7601u/tx.c
@@ -109,9 +109,9 @@ void mt7601u_tx_status(struct mt7601u_dev *dev, struct sk_buff *skb)
 	info->status.rates[0].idx = -1;
 	info->flags |= IEEE80211_TX_STAT_ACK;
 
-	spin_lock(&dev->mac_lock);
+	spin_lock_bh(&dev->mac_lock);
 	ieee80211_tx_status(dev->hw, skb);
-	spin_unlock(&dev->mac_lock);
+	spin_unlock_bh(&dev->mac_lock);
 }
 
 static int mt7601u_skb_rooms(struct mt7601u_dev *dev, struct sk_buff *skb)
-- 
2.20.1

[PATCH AUTOSEL 5.2 161/249] ipvs: fix tinfo memory leak in start_sync_thread

[Sasha Levin]

From: Julian Anastasov <ja@ssi.bg>

[ Upstream commit 5db7c8b9f9fc2aeec671ae3ca6375752c162e0e7 ]

syzkaller reports for memory leak in start_sync_thread [1]

As Eric points out, kthread may start and stop before the
threadfn function is called, so there is no chance the
data (tinfo in our case) to be released in thread.

Fix this by releasing tinfo in the controlling code instead.

[1]
BUG: memory leak
unreferenced object 0xffff8881206bf700 (size 32):
 comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s)
 hex dump (first 32 bytes):
   00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff  .@|......E.!....
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 backtrace:
   [<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
   [<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline]
   [<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline]
   [<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
   [<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline]
   [<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862
   [<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402
   [<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
   [<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115
   [<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline]
   [<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238
   [<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
   [<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
   [<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
   [<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline]
   [<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline]
   [<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
   [<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
   [<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 998e7a76804b ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ip_vs.h             |   6 +-
 net/netfilter/ipvs/ip_vs_ctl.c  |   4 -
 net/netfilter/ipvs/ip_vs_sync.c | 134 +++++++++++++++++---------------
 3 files changed, 76 insertions(+), 68 deletions(-)

diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 2ac40135b576..b36a1df93e7c 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -808,11 +808,12 @@ struct ipvs_master_sync_state {
 	struct ip_vs_sync_buff	*sync_buff;
 	unsigned long		sync_queue_len;
 	unsigned int		sync_queue_delay;
-	struct task_struct	*master_thread;
 	struct delayed_work	master_wakeup_work;
 	struct netns_ipvs	*ipvs;
 };
 
+struct ip_vs_sync_thread_data;
+
 /* How much time to keep dests in trash */
 #define IP_VS_DEST_TRASH_PERIOD		(120 * HZ)
 
@@ -943,7 +944,8 @@ struct netns_ipvs {
 	spinlock_t		sync_lock;
 	struct ipvs_master_sync_state *ms;
 	spinlock_t		sync_buff_lock;
-	struct task_struct	**backup_threads;
+	struct ip_vs_sync_thread_data *master_tinfo;
+	struct ip_vs_sync_thread_data *backup_tinfo;
 	int			threads_mask;
 	volatile int		sync_state;
 	struct mutex		sync_mutex;
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 776c87ed4813..741d91aa4a8d 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2396,9 +2396,7 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 			cfg.syncid = dm->syncid;
 			ret = start_sync_thread(ipvs, &cfg, dm->state);
 		} else {
-			mutex_lock(&ipvs->sync_mutex);
 			ret = stop_sync_thread(ipvs, dm->state);
-			mutex_unlock(&ipvs->sync_mutex);
 		}
 		goto out_dec;
 	}
@@ -3515,10 +3513,8 @@ static int ip_vs_genl_del_daemon(struct netns_ipvs *ipvs, struct nlattr **attrs)
 	if (!attrs[IPVS_DAEMON_ATTR_STATE])
 		return -EINVAL;
 
-	mutex_lock(&ipvs->sync_mutex);
 	ret = stop_sync_thread(ipvs,
 			       nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]));
-	mutex_unlock(&ipvs->sync_mutex);
 	return ret;
 }
 
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 2526be6b3d90..a4a78c4b06de 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -195,6 +195,7 @@ union ip_vs_sync_conn {
 #define IPVS_OPT_F_PARAM	(1 << (IPVS_OPT_PARAM-1))
 
 struct ip_vs_sync_thread_data {
+	struct task_struct *task;
 	struct netns_ipvs *ipvs;
 	struct socket *sock;
 	char *buf;
@@ -374,8 +375,11 @@ static inline void sb_queue_tail(struct netns_ipvs *ipvs,
 					      max(IPVS_SYNC_SEND_DELAY, 1));
 		ms->sync_queue_len++;
 		list_add_tail(&sb->list, &ms->sync_queue);
-		if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE)
-			wake_up_process(ms->master_thread);
+		if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE) {
+			int id = (int)(ms - ipvs->ms);
+
+			wake_up_process(ipvs->master_tinfo[id].task);
+		}
 	} else
 		ip_vs_sync_buff_release(sb);
 	spin_unlock(&ipvs->sync_lock);
@@ -1636,8 +1640,10 @@ static void master_wakeup_work_handler(struct work_struct *work)
 	spin_lock_bh(&ipvs->sync_lock);
 	if (ms->sync_queue_len &&
 	    ms->sync_queue_delay < IPVS_SYNC_WAKEUP_RATE) {
+		int id = (int)(ms - ipvs->ms);
+
 		ms->sync_queue_delay = IPVS_SYNC_WAKEUP_RATE;
-		wake_up_process(ms->master_thread);
+		wake_up_process(ipvs->master_tinfo[id].task);
 	}
 	spin_unlock_bh(&ipvs->sync_lock);
 }
@@ -1703,10 +1709,6 @@ static int sync_thread_master(void *data)
 	if (sb)
 		ip_vs_sync_buff_release(sb);
 
-	/* release the sending multicast socket */
-	sock_release(tinfo->sock);
-	kfree(tinfo);
-
 	return 0;
 }
 
@@ -1740,11 +1742,6 @@ static int sync_thread_backup(void *data)
 		}
 	}
 
-	/* release the sending multicast socket */
-	sock_release(tinfo->sock);
-	kfree(tinfo->buf);
-	kfree(tinfo);
-
 	return 0;
 }
 
@@ -1752,8 +1749,8 @@ static int sync_thread_backup(void *data)
 int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 		      int state)
 {
-	struct ip_vs_sync_thread_data *tinfo = NULL;
-	struct task_struct **array = NULL, *task;
+	struct ip_vs_sync_thread_data *ti = NULL, *tinfo;
+	struct task_struct *task;
 	struct net_device *dev;
 	char *name;
 	int (*threadfn)(void *data);
@@ -1822,7 +1819,7 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 		threadfn = sync_thread_master;
 	} else if (state == IP_VS_STATE_BACKUP) {
 		result = -EEXIST;
-		if (ipvs->backup_threads)
+		if (ipvs->backup_tinfo)
 			goto out_early;
 
 		ipvs->bcfg = *c;
@@ -1849,28 +1846,22 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 					  master_wakeup_work_handler);
 			ms->ipvs = ipvs;
 		}
-	} else {
-		array = kcalloc(count, sizeof(struct task_struct *),
-				GFP_KERNEL);
-		result = -ENOMEM;
-		if (!array)
-			goto out;
 	}
+	result = -ENOMEM;
+	ti = kcalloc(count, sizeof(struct ip_vs_sync_thread_data),
+		     GFP_KERNEL);
+	if (!ti)
+		goto out;
 
 	for (id = 0; id < count; id++) {
-		result = -ENOMEM;
-		tinfo = kmalloc(sizeof(*tinfo), GFP_KERNEL);
-		if (!tinfo)
-			goto out;
+		tinfo = &ti[id];
 		tinfo->ipvs = ipvs;
-		tinfo->sock = NULL;
 		if (state == IP_VS_STATE_BACKUP) {
+			result = -ENOMEM;
 			tinfo->buf = kmalloc(ipvs->bcfg.sync_maxlen,
 					     GFP_KERNEL);
 			if (!tinfo->buf)
 				goto out;
-		} else {
-			tinfo->buf = NULL;
 		}
 		tinfo->id = id;
 		if (state == IP_VS_STATE_MASTER)
@@ -1885,17 +1876,15 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 			result = PTR_ERR(task);
 			goto out;
 		}
-		tinfo = NULL;
-		if (state == IP_VS_STATE_MASTER)
-			ipvs->ms[id].master_thread = task;
-		else
-			array[id] = task;
+		tinfo->task = task;
 	}
 
 	/* mark as active */
 
-	if (state == IP_VS_STATE_BACKUP)
-		ipvs->backup_threads = array;
+	if (state == IP_VS_STATE_MASTER)
+		ipvs->master_tinfo = ti;
+	else
+		ipvs->backup_tinfo = ti;
 	spin_lock_bh(&ipvs->sync_buff_lock);
 	ipvs->sync_state |= state;
 	spin_unlock_bh(&ipvs->sync_buff_lock);
@@ -1910,29 +1899,31 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 
 out:
 	/* We do not need RTNL lock anymore, release it here so that
-	 * sock_release below and in the kthreads can use rtnl_lock
-	 * to leave the mcast group.
+	 * sock_release below can use rtnl_lock to leave the mcast group.
 	 */
 	rtnl_unlock();
-	count = id;
-	while (count-- > 0) {
-		if (state == IP_VS_STATE_MASTER)
-			kthread_stop(ipvs->ms[count].master_thread);
-		else
-			kthread_stop(array[count]);
+	id = min(id, count - 1);
+	if (ti) {
+		for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+			if (tinfo->task)
+				kthread_stop(tinfo->task);
+		}
 	}
 	if (!(ipvs->sync_state & IP_VS_STATE_MASTER)) {
 		kfree(ipvs->ms);
 		ipvs->ms = NULL;
 	}
 	mutex_unlock(&ipvs->sync_mutex);
-	if (tinfo) {
-		if (tinfo->sock)
-			sock_release(tinfo->sock);
-		kfree(tinfo->buf);
-		kfree(tinfo);
+
+	/* No more mutexes, release socks */
+	if (ti) {
+		for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+			if (tinfo->sock)
+				sock_release(tinfo->sock);
+			kfree(tinfo->buf);
+		}
+		kfree(ti);
 	}
-	kfree(array);
 	return result;
 
 out_early:
@@ -1944,15 +1935,18 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 
 int stop_sync_thread(struct netns_ipvs *ipvs, int state)
 {
-	struct task_struct **array;
+	struct ip_vs_sync_thread_data *ti, *tinfo;
 	int id;
 	int retc = -EINVAL;
 
 	IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
 
+	mutex_lock(&ipvs->sync_mutex);
 	if (state == IP_VS_STATE_MASTER) {
+		retc = -ESRCH;
 		if (!ipvs->ms)
-			return -ESRCH;
+			goto err;
+		ti = ipvs->master_tinfo;
 
 		/*
 		 * The lock synchronizes with sb_queue_tail(), so that we don't
@@ -1971,38 +1965,56 @@ int stop_sync_thread(struct netns_ipvs *ipvs, int state)
 			struct ipvs_master_sync_state *ms = &ipvs->ms[id];
 			int ret;
 
+			tinfo = &ti[id];
 			pr_info("stopping master sync thread %d ...\n",
-				task_pid_nr(ms->master_thread));
+				task_pid_nr(tinfo->task));
 			cancel_delayed_work_sync(&ms->master_wakeup_work);
-			ret = kthread_stop(ms->master_thread);
+			ret = kthread_stop(tinfo->task);
 			if (retc >= 0)
 				retc = ret;
 		}
 		kfree(ipvs->ms);
 		ipvs->ms = NULL;
+		ipvs->master_tinfo = NULL;
 	} else if (state == IP_VS_STATE_BACKUP) {
-		if (!ipvs->backup_threads)
-			return -ESRCH;
+		retc = -ESRCH;
+		if (!ipvs->backup_tinfo)
+			goto err;
+		ti = ipvs->backup_tinfo;
 
 		ipvs->sync_state &= ~IP_VS_STATE_BACKUP;
-		array = ipvs->backup_threads;
 		retc = 0;
 		for (id = ipvs->threads_mask; id >= 0; id--) {
 			int ret;
 
+			tinfo = &ti[id];
 			pr_info("stopping backup sync thread %d ...\n",
-				task_pid_nr(array[id]));
-			ret = kthread_stop(array[id]);
+				task_pid_nr(tinfo->task));
+			ret = kthread_stop(tinfo->task);
 			if (retc >= 0)
 				retc = ret;
 		}
-		kfree(array);
-		ipvs->backup_threads = NULL;
+		ipvs->backup_tinfo = NULL;
+	} else {
+		goto err;
 	}
+	id = ipvs->threads_mask;
+	mutex_unlock(&ipvs->sync_mutex);
+
+	/* No more mutexes, release socks */
+	for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+		if (tinfo->sock)
+			sock_release(tinfo->sock);
+		kfree(tinfo->buf);
+	}
+	kfree(ti);
 
 	/* decrease the module use count */
 	ip_vs_use_count_dec();
+	return retc;
 
+err:
+	mutex_unlock(&ipvs->sync_mutex);
 	return retc;
 }
 
@@ -2021,7 +2033,6 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
 {
 	int retc;
 
-	mutex_lock(&ipvs->sync_mutex);
 	retc = stop_sync_thread(ipvs, IP_VS_STATE_MASTER);
 	if (retc && retc != -ESRCH)
 		pr_err("Failed to stop Master Daemon\n");
@@ -2029,5 +2040,4 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
 	retc = stop_sync_thread(ipvs, IP_VS_STATE_BACKUP);
 	if (retc && retc != -ESRCH)
 		pr_err("Failed to stop Backup Daemon\n");
-	mutex_unlock(&ipvs->sync_mutex);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 162/249] mt76: mt7615: do not process rx packets if the device is not initialized

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 2dcb79cde6129d948a237ef7b48a73a0c82f1e01 ]

Fix following crash that occurs when the driver is processing rx packets
while the device is not initialized yet

$ rmmod mt7615e
[   67.210261] mt7615e 0000:01:00.0: Message -239 (seq 2) timeout
$ modprobe mt7615e
[   72.406937] bus=0x1, slot = 0x0, irq=0x16
[   72.436590] CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc == 8eec4240, ra == 8eec41e0
[   72.450291] mt7615e 0000:01:00.0: Firmware is not ready for download
[   72.457724] Oops[#1]:
[   72.470494] mt7615e: probe of 0000:01:00.0 failed with error -5
[   72.474829] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.114 #0
[   72.498702] task: 805769e0 task.stack: 80564000
[   72.507709] $ 0   : 00000000 00000001 00000000 00000001
[   72.518106] $ 4   : 8f704dbc 00000000 00000000 8f7046c0
[   72.528500] $ 8   : 00000024 8045e98c 81210008 11000000
[   72.538895] $12   : 8fc09f60 00000008 00000019 00000033
[   72.549289] $16   : 8f704d80 e00000ff 8f0c7800 3c182406
[   72.559684] $20   : 00000006 8ee615a0 4e000108 00000000
[   72.570078] $24   : 0000004c 8000cf94
[   72.580474] $28   : 80564000 8fc09e38 00000001 8eec41e0
[   72.590869] Hi    : 00000001
[   72.596582] Lo    : 00000000
[   72.602319] epc   : 8eec4240 mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[   72.614953] ra    : 8eec41e0 mt7615_mac_fill_rx+0x4c/0x494 [mt7615e]
[   72.627580] Status: 11008403 KERNEL EXL IE
[   72.635899] Cause : 40800008 (ExcCode 02)
[   72.643860] BadVA : 00000004
[   72.649573] PrId  : 0001992f (MIPS 1004Kc)
[   72.657704] Modules linked in: mt7615e pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_mu]
[   72.792717] Process swapper/0 (pid: 0, threadinfo=80564000, task=805769e0, tls=00000000)
[   72.808799] Stack : 8f0c7800 00000800 8f0c7800 8032b874 00000000 40000000 8f704d80 8ee615a0
[   72.825428]         8dc88010 00000001 8ee615e0 8eec09b0 8dc88010 8032b914 8f3aee80 80567d20
[   72.842055]         00000000 8ee615e0 40000000 8f0c7800 00000108 8eec9944 00000000 00000000
[   72.858682]         80508f10 80510000 00000001 80567d20 8ee615a0 00000000 00000000 8ee61c00
[   72.875308]         8ee61c40 00000040 80610000 80580000 00000000 8ee615dc 8ee61a68 00000001
[   72.891936]         ...
[   72.896793] Call Trace:
[   72.901649] [<8eec4240>] mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[   72.913602] [<8eec09b0>] mt7615_queue_rx_skb+0xe4/0x12c [mt7615e]
[   72.925734] [<8eec9944>] mt76_dma_cleanup+0x390/0x42c [mt76]
[   72.936988] Code: ae020018  8ea20004  24030001 <94420004> a602002a  8ea20004  90420000  14430003  a2020034
[   72.956390]
[   72.959676] ---[ end trace f176967739edb19f ]---

Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index b8f48d10f27a..a27bc6791aa7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -96,6 +96,9 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb)
 	bool unicast, remove_pad, insert_ccmp_hdr = false;
 	int i, idx;
 
+	if (!test_bit(MT76_STATE_RUNNING, &dev->mt76.state))
+		return -EINVAL;
+
 	memset(status, 0, sizeof(*status));
 
 	unicast = (rxd1 & MT_RXD1_NORMAL_ADDR_TYPE) == MT_RXD1_NORMAL_U2M;
-- 
2.20.1

[PATCH AUTOSEL 5.2 163/249] ath10k: add missing error handling

[Sasha Levin]

From: Claire Chang <tientzu@chromium.org>

[ Upstream commit 4b553f3ca4cbde67399aa3a756c37eb92145b8a1 ]

In function ath10k_sdio_mbox_rx_alloc() [sdio.c],
ath10k_sdio_mbox_alloc_rx_pkt() is called without handling the error cases.
This will make the driver think the allocation for skb is successful and
try to access the skb. If we enable failslab, system will easily crash with
NULL pointer dereferencing.

Call trace of CONFIG_FAILSLAB:
ath10k_sdio_irq_handler+0x570/0xa88 [ath10k_sdio]
process_sdio_pending_irqs+0x4c/0x174
sdio_run_irqs+0x3c/0x64
sdio_irq_work+0x1c/0x28

Fixes: d96db25d2025 ("ath10k: add initial SDIO support")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index fae56c67766f..73ef3e75d199 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -602,6 +602,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 						    full_len,
 						    last_in_bundle,
 						    last_in_bundle);
+		if (ret) {
+			ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
+			goto err;
+		}
 	}
 
 	ar_sdio->n_rx_pkts = i;
-- 
2.20.1

[PATCH AUTOSEL 5.2 164/249] ath10k: fix fw crash by moving chip reset after napi disabled

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 08d80e4cd27ba19f9bee9e5f788f9a9fc440a22f ]

On SMP platform, when continuously running wifi up/down, the napi
poll can be scheduled during chip reset, which will call
ath10k_pci_has_fw_crashed() to check the fw status. But in the reset
period, the value from FW_INDICATOR_ADDRESS register will return
0xdeadbeef, which also be treated as fw crash. Fix the issue by
moving chip reset after napi disabled.

ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6)
ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16
ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16
ath10k_pci 0000:01:00.0: Copy Engine register dump:
ath10k_pci 0000:01:00.0: [00]: 0x0004a000   0   0   0   0
ath10k_pci 0000:01:00.0: [01]: 0x0004a400   0   0   0   0
ath10k_pci 0000:01:00.0: [02]: 0x0004a800   0   0   0   0
ath10k_pci 0000:01:00.0: [03]: 0x0004ac00   0   0   0   0
ath10k_pci 0000:01:00.0: [04]: 0x0004b000   0   0   0   0
ath10k_pci 0000:01:00.0: [05]: 0x0004b400   0   0   0   0
ath10k_pci 0000:01:00.0: [06]: 0x0004b800   0   0   0   0
ath10k_pci 0000:01:00.0: [07]: 0x0004bc00   1   0   1   0
ath10k_pci 0000:01:00.0: [08]: 0x0004c000   0   0   0   0
ath10k_pci 0000:01:00.0: [09]: 0x0004c400   0   0   0   0
ath10k_pci 0000:01:00.0: [10]: 0x0004c800   0   0   0   0
ath10k_pci 0000:01:00.0: [11]: 0x0004cc00   0   0   0   0

Tested HW: QCA9984,QCA9887,WCN3990

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/pci.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 2c27f407a851..6e5f7ae00253 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2059,6 +2059,11 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
 
+	ath10k_pci_irq_disable(ar);
+	ath10k_pci_irq_sync(ar);
+	napi_synchronize(&ar->napi);
+	napi_disable(&ar->napi);
+
 	/* Most likely the device has HTT Rx ring configured. The only way to
 	 * prevent the device from accessing (and possible corrupting) host
 	 * memory is to reset the chip now.
@@ -2072,10 +2077,6 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	 */
 	ath10k_pci_safe_chip_reset(ar);
 
-	ath10k_pci_irq_disable(ar);
-	ath10k_pci_irq_sync(ar);
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
 	ath10k_pci_flush(ar);
 
 	spin_lock_irqsave(&ar_pci->ps_lock, flags);
-- 
2.20.1

[PATCH AUTOSEL 5.2 165/249] ath10k: fix PCIE device wake up failed

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ]

Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"

The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake

Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.

But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.

Tested HW: QCA9984

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index ad082b7d7643..b242085c3c16 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -158,7 +158,7 @@ const struct ath10k_hw_values qca6174_values = {
 };
 
 const struct ath10k_hw_values qca99x0_values = {
-	.rtc_state_val_on		= 5,
+	.rtc_state_val_on		= 7,
 	.ce_count			= 12,
 	.msi_assign_ce_max		= 12,
 	.num_target_ce_config_wlan	= 10,
-- 
2.20.1

[PATCH AUTOSEL 5.2 174/249] netfilter: ctnetlink: Fix regression in conntrack entry deletion

[Sasha Levin]

From: Felix Kaechele <felix@kaechele.ca>

[ Upstream commit e7600865db32b69deb0109b8254244dca592adcf ]

Commit f8e608982022 ("netfilter: ctnetlink: Resolve conntrack
L3-protocol flush regression") introduced a regression in which deletion
of conntrack entries would fail because the L3 protocol information
is replaced by AF_UNSPEC. As a result the search for the entry to be
deleted would turn up empty due to the tuple used to perform the search
is now different from the tuple used to initially set up the entry.

For flushing the conntrack table we do however want to keep the option
for nfgenmsg->version to have a non-zero value to allow for newer
user-space tools to request treatment under the new behavior. With that
it is possible to independently flush tables for a defined L3 protocol.
This was introduced with the enhancements in in commit 59c08c69c278
("netfilter: ctnetlink: Support L3 protocol-filter on flush").

Older user-space tools will retain the behavior of flushing all tables
regardless of defined L3 protocol.

Fixes: f8e608982022 ("netfilter: ctnetlink: Resolve conntrack L3-protocol flush regression")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_netlink.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 7db79c1b8084..1b77444d5b52 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1256,7 +1256,6 @@ static int ctnetlink_del_conntrack(struct net *net, struct sock *ctnl,
 	struct nf_conntrack_tuple tuple;
 	struct nf_conn *ct;
 	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
-	u_int8_t u3 = nfmsg->version ? nfmsg->nfgen_family : AF_UNSPEC;
 	struct nf_conntrack_zone zone;
 	int err;
 
@@ -1266,11 +1265,13 @@ static int ctnetlink_del_conntrack(struct net *net, struct sock *ctnl,
 
 	if (cda[CTA_TUPLE_ORIG])
 		err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_ORIG,
-					    u3, &zone);
+					    nfmsg->nfgen_family, &zone);
 	else if (cda[CTA_TUPLE_REPLY])
 		err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_REPLY,
-					    u3, &zone);
+					    nfmsg->nfgen_family, &zone);
 	else {
+		u_int8_t u3 = nfmsg->version ? nfmsg->nfgen_family : AF_UNSPEC;
+
 		return ctnetlink_flush_conntrack(net, cda,
 						 NETLINK_CB(skb).portid,
 						 nlmsg_report(nlh), u3);
-- 
2.20.1

[PATCH AUTOSEL 5.2 175/249] xsk: Properly terminate assignment in xskq_produce_flush_desc

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit f7019b7b0ad14bde732b8953161994edfc384953 ]

Clang warns:

In file included from net/xdp/xsk_queue.c:10:
net/xdp/xsk_queue.h:292:2: warning: expression result unused
[-Wunused-value]
        WRITE_ONCE(q->ring->producer, q->prod_tail);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:284:6: note: expanded from macro 'WRITE_ONCE'
        __u.__val;                                      \
        ~~~ ^~~~~
1 warning generated.

The q->prod_tail assignment has a comma at the end, not a semi-colon.
Fix that so clang no longer warns and everything works as expected.

Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support")
Link: https://github.com/ClangBuiltLinux/linux/issues/544
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xdp/xsk_queue.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h
index 88b9ae24658d..cba4a640d5e8 100644
--- a/net/xdp/xsk_queue.h
+++ b/net/xdp/xsk_queue.h
@@ -288,7 +288,7 @@ static inline void xskq_produce_flush_desc(struct xsk_queue *q)
 	/* Order producer and data */
 	smp_wmb(); /* B, matches C */
 
-	q->prod_tail = q->prod_head,
+	q->prod_tail = q->prod_head;
 	WRITE_ONCE(q->ring->producer, q->prod_tail);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 177/249] bpf: fix BPF_ALU32 | BPF_ARSH on BE arches

[Sasha Levin]

From: Jiong Wang <jiong.wang@netronome.com>

[ Upstream commit 75672dda27bd00109a84cd975c17949ad9c45663 ]

Yauheni reported the following code do not work correctly on BE arches:

       ALU_ARSH_X:
               DST = (u64) (u32) ((*(s32 *) &DST) >> SRC);
               CONT;
       ALU_ARSH_K:
               DST = (u64) (u32) ((*(s32 *) &DST) >> IMM);
               CONT;

and are causing failure of test_verifier test 'arsh32 on imm 2' on BE
arches.

The code is taking address and interpreting memory directly, so is not
endianness neutral. We should instead perform standard C type casting on
the variable. A u64 to s32 conversion will drop the high 32-bit and reserve
the low 32-bit as signed integer, this is all we want.

Fixes: 2dc6b100f928 ("bpf: interpreter support BPF_ALU | BPF_ARSH")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 080e2bb644cc..f2148db91439 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -1364,10 +1364,10 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack)
 		insn++;
 		CONT;
 	ALU_ARSH_X:
-		DST = (u64) (u32) ((*(s32 *) &DST) >> SRC);
+		DST = (u64) (u32) (((s32) DST) >> SRC);
 		CONT;
 	ALU_ARSH_K:
-		DST = (u64) (u32) ((*(s32 *) &DST) >> IMM);
+		DST = (u64) (u32) (((s32) DST) >> IMM);
 		CONT;
 	ALU64_ARSH_X:
 		(*(s64 *) &DST) >>= SRC;
-- 
2.20.1

[PATCH AUTOSEL 5.2 180/249] net: hns3: restore the MAC autoneg state after reset

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit d736fc6c68a5f76e89a6c2c4100e3678706003a3 ]

When doing global reset, the MAC autoneg state of fibre
port is set to default, which may cause user configuration
lost. This patch fixes it by restore the MAC autoneg state
after reset.

Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 4d9bcad26f06..645b9b3e0256 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2389,6 +2389,15 @@ static int hclge_mac_init(struct hclge_dev *hdev)
 		return ret;
 	}
 
+	if (hdev->hw.mac.support_autoneg) {
+		ret = hclge_set_autoneg_en(hdev, hdev->hw.mac.autoneg);
+		if (ret) {
+			dev_err(&hdev->pdev->dev,
+				"Config mac autoneg fail ret=%d\n", ret);
+			return ret;
+		}
+	}
+
 	mac->link = 0;
 
 	if (mac->user_fec_mode & BIT(HNAE3_FEC_USER_DEF)) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 181/249] net/mlx5: Get vport ACL namespace by vport index

[Sasha Levin]

From: Jianbo Liu <jianbol@mellanox.com>

[ Upstream commit f53297d67800feb5fafd94abd926c889aefee690 ]

The ingress and egress ACL root namespaces are created per vport and
stored into arrays. However, the vport number is not the same as the
index. Passing the array index, instead of vport number, to get the
correct ingress and egress acl namespace.

Fixes: 9b93ab981e3b ("net/mlx5: Separate ingress/egress namespaces for each vport")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 6a921e24cd5e..acab26b88261 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -939,7 +939,7 @@ int esw_vport_enable_egress_acl(struct mlx5_eswitch *esw,
 		  vport->vport, MLX5_CAP_ESW_EGRESS_ACL(dev, log_max_ft_size));
 
 	root_ns = mlx5_get_flow_vport_acl_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_EGRESS,
-						    vport->vport);
+			mlx5_eswitch_vport_num_to_index(esw, vport->vport));
 	if (!root_ns) {
 		esw_warn(dev, "Failed to get E-Switch egress flow namespace for vport (%d)\n", vport->vport);
 		return -EOPNOTSUPP;
@@ -1057,7 +1057,7 @@ int esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw,
 		  vport->vport, MLX5_CAP_ESW_INGRESS_ACL(dev, log_max_ft_size));
 
 	root_ns = mlx5_get_flow_vport_acl_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_INGRESS,
-						    vport->vport);
+			mlx5_eswitch_vport_num_to_index(esw, vport->vport));
 	if (!root_ns) {
 		esw_warn(dev, "Failed to get E-Switch ingress flow namespace for vport (%d)\n", vport->vport);
 		return -EOPNOTSUPP;
-- 
2.20.1

[PATCH AUTOSEL 5.2 182/249] ixgbe: Check DDM existence in transceiver before access

[Sasha Levin]

From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>

[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ]

Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.

Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:

ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.

Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 ++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h     | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index acba067cc15a..7c52ae8ac005 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3226,7 +3226,8 @@ static int ixgbe_get_module_info(struct net_device *dev,
 		page_swap = true;
 	}
 
-	if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) {
+	if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap ||
+	    !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) {
 		/* We have a SFP, but it does not support SFF-8472 */
 		modinfo->type = ETH_MODULE_SFF_8079;
 		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 214b01085718..6544c4539c0d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -45,6 +45,7 @@
 #define IXGBE_SFF_SOFT_RS_SELECT_10G		0x8
 #define IXGBE_SFF_SOFT_RS_SELECT_1G		0x0
 #define IXGBE_SFF_ADDRESSING_MODE		0x4
+#define IXGBE_SFF_DDM_IMPLEMENTED		0x40
 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE		0x1
 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE		0x8
 #define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE	0x23
-- 
2.20.1

[PATCH AUTOSEL 5.2 186/249] ath9k: correctly handle short radar pulses

[Sasha Levin]

From: Zefir Kurtisi <zefir.kurtisi@neratec.com>

[ Upstream commit df5c4150501ee7e86383be88f6490d970adcf157 ]

In commit 3c0efb745a17 ("ath9k: discard undersized packets")
the lower bound of RX packets was set to 10 (min ACK size) to
filter those that would otherwise be treated as invalid at
mac80211.

Alas, short radar pulses are reported as PHY_ERROR frames
with length set to 3. Therefore their detection stopped
working after that commit.

NOTE: ath9k drivers built thereafter will not pass DFS
certification.

This extends the criteria for short packets to explicitly
handle PHY_ERROR frames.

Fixes: 3c0efb745a17 ("ath9k: discard undersized packets")
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/recv.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 4e97f7f3b2a3..06e660858766 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -815,6 +815,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_hdr *hdr;
 	bool discard_current = sc->rx.discard_next;
+	bool is_phyerr;
 
 	/*
 	 * Discard corrupt descriptors which are marked in
@@ -827,8 +828,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 
 	/*
 	 * Discard zero-length packets and packets smaller than an ACK
+	 * which are not PHY_ERROR (short radar pulses have a length of 3)
 	 */
-	if (rx_stats->rs_datalen < 10) {
+	is_phyerr = rx_stats->rs_status & ATH9K_RXERR_PHY;
+	if (!rx_stats->rs_datalen ||
+	    (rx_stats->rs_datalen < 10 && !is_phyerr)) {
 		RX_STAT_INC(sc, rx_len_err);
 		goto corrupt;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 187/249] wil6210: drop old event after wmi_call timeout

[Sasha Levin]

From: Ahmad Masri <amasri@codeaurora.org>

[ Upstream commit 1a276003111c0404f6bfeffe924c5a21f482428b ]

This change fixes a rare race condition of handling WMI events after
wmi_call expires.

wmi_recv_cmd immediately handles an event when reply_buf is defined and
a wmi_call is waiting for the event.
However, in case the wmi_call has already timed-out, there will be no
waiting/running wmi_call and the event will be queued in WMI queue and
will be handled later in wmi_event_handle.
Meanwhile, a new similar wmi_call for the same command and event may
be issued. In this case, when handling the queued event we got WARN_ON
printed.

Fixing this case as a valid timeout and drop the unexpected event.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index d89cd41e78ac..89a75ff29410 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -3220,7 +3220,18 @@ static void wmi_event_handle(struct wil6210_priv *wil,
 		/* check if someone waits for this event */
 		if (wil->reply_id && wil->reply_id == id &&
 		    wil->reply_mid == mid) {
-			WARN_ON(wil->reply_buf);
+			if (wil->reply_buf) {
+				/* event received while wmi_call is waiting
+				 * with a buffer. Such event should be handled
+				 * in wmi_recv_cmd function. Handling the event
+				 * here means a previous wmi_call was timeout.
+				 * Drop the event and do not handle it.
+				 */
+				wil_err(wil,
+					"Old event (%d, %s) while wmi_call is waiting. Drop it and Continue waiting\n",
+					id, eventid2name(id));
+				return;
+			}
 
 			wmi_evt_call_handler(vif, id, evt_data,
 					     len - sizeof(*wmi));
-- 
2.20.1

[PATCH AUTOSEL 5.2 189/249] net/mlx5e: Attach/detach XDP program safely

[Sasha Levin]

From: Maxim Mikityanskiy <maximmi@mellanox.com>

[ Upstream commit e18953240de8b46360a67090c87ee1ef8160b35d ]

When an XDP program is set, a full reopen of all channels happens in two
cases:

1. When there was no program set, and a new one is being set.

2. When there was a program set, but it's being unset.

The full reopen is necessary, because the channel parameters may change
if XDP is enabled or disabled. However, it's performed in an unsafe way:
if the new channels fail to open, the old ones are already closed, and
the interface goes down. Use the safe way to switch channels instead.
The same way is already used for other configuration changes.

Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/en_main.c | 31 ++++++++++++-------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index a8e8350b38aa..8db9fdbc03ea 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4192,8 +4192,6 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
 	/* no need for full reset when exchanging programs */
 	reset = (!priv->channels.params.xdp_prog || !prog);
 
-	if (was_opened && reset)
-		mlx5e_close_locked(netdev);
 	if (was_opened && !reset) {
 		/* num_channels is invariant here, so we can take the
 		 * batched reference right upfront.
@@ -4205,20 +4203,31 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
 		}
 	}
 
-	/* exchange programs, extra prog reference we got from caller
-	 * as long as we don't fail from this point onwards.
-	 */
-	old_prog = xchg(&priv->channels.params.xdp_prog, prog);
+	if (was_opened && reset) {
+		struct mlx5e_channels new_channels = {};
+
+		new_channels.params = priv->channels.params;
+		new_channels.params.xdp_prog = prog;
+		mlx5e_set_rq_type(priv->mdev, &new_channels.params);
+		old_prog = priv->channels.params.xdp_prog;
+
+		err = mlx5e_safe_switch_channels(priv, &new_channels, NULL);
+		if (err)
+			goto unlock;
+	} else {
+		/* exchange programs, extra prog reference we got from caller
+		 * as long as we don't fail from this point onwards.
+		 */
+		old_prog = xchg(&priv->channels.params.xdp_prog, prog);
+	}
+
 	if (old_prog)
 		bpf_prog_put(old_prog);
 
-	if (reset) /* change RQ type according to priv->xdp_prog */
+	if (!was_opened && reset) /* change RQ type according to priv->xdp_prog */
 		mlx5e_set_rq_type(priv->mdev, &priv->channels.params);
 
-	if (was_opened && reset)
-		err = mlx5e_open_locked(netdev);
-
-	if (!test_bit(MLX5E_STATE_OPENED, &priv->state) || reset)
+	if (!was_opened || reset)
 		goto unlock;
 
 	/* exchanging programs w/o reset, we update ref counts on behalf
-- 
2.20.1

[PATCH AUTOSEL 5.2 199/249] net: hns3: fix a -Wformat-nonliteral compile warning

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 18d219b783da61a6cc77581f55fc4af2fa16bc36 ]

When setting -Wformat=2, there is a compiler warning like this:

hclge_main.c:xxx:x: warning: format not a string literal and no
format arguments [-Wformat-nonliteral]
strs[i].desc);
^~~~

This patch adds missing format parameter "%s" to snprintf() to
fix it.

Fixes: 46a3df9f9718 ("Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 645b9b3e0256..f661281de36b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -552,8 +552,7 @@ static u8 *hclge_comm_get_strings(u32 stringset,
 		return buff;
 
 	for (i = 0; i < size; i++) {
-		snprintf(buff, ETH_GSTRING_LEN,
-			 strs[i].desc);
+		snprintf(buff, ETH_GSTRING_LEN, "%s", strs[i].desc);
 		buff = buff + ETH_GSTRING_LEN;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 200/249] net: hns3: add some error checking in hclge_tm module

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 04f25edb48c441fc278ecc154c270f16966cbb90 ]

When hdev->tx_sch_mode is HCLGE_FLAG_VNET_BASE_SCH_MODE, the
hclge_tm_schd_mode_vnet_base_cfg calls hclge_tm_pri_schd_mode_cfg
with vport->vport_id as pri_id, which is used as index for
hdev->tm_info.tc_info, it will cause out of bound access issue
if vport_id is equal to or larger than HNAE3_MAX_TC.

Also hardware only support maximum speed of HCLGE_ETHER_MAX_RATE.

So this patch adds two checks for above cases.

Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index a7bbb6d3091a..0d53062f7bb5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -54,7 +54,8 @@ static int hclge_shaper_para_calc(u32 ir, u8 shaper_level,
 	u32 tick;
 
 	/* Calc tick */
-	if (shaper_level >= HCLGE_SHAPER_LVL_CNT)
+	if (shaper_level >= HCLGE_SHAPER_LVL_CNT ||
+	    ir > HCLGE_ETHER_MAX_RATE)
 		return -EINVAL;
 
 	tick = tick_array[shaper_level];
@@ -1124,6 +1125,9 @@ static int hclge_tm_schd_mode_vnet_base_cfg(struct hclge_vport *vport)
 	int ret;
 	u8 i;
 
+	if (vport->vport_id >= HNAE3_MAX_TC)
+		return -EINVAL;
+
 	ret = hclge_tm_pri_schd_mode_cfg(hdev, vport->vport_id);
 	if (ret)
 		return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.2 201/249] ath10k: Fix memory leak in qmi

[Sasha Levin]

From: Dundi Raviteja <dundi@codeaurora.org>

[ Upstream commit c709df58832c5f575f0255bea4b09ad477fc62ea ]

Currently the memory allocated for qmi handle is
not being freed during de-init which leads to memory leak.

Free the allocated qmi memory in qmi deinit
to avoid memory leak.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: fda6fee0001e ("ath10k: add QMI message handshake for wcn3990 client")
Signed-off-by: Dundi Raviteja <dundi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/qmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index a7bc2c70d076..8f8f717a23ee 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -1002,6 +1002,7 @@ int ath10k_qmi_deinit(struct ath10k *ar)
 	qmi_handle_release(&qmi->qmi_hdl);
 	cancel_work_sync(&qmi->event_work);
 	destroy_workqueue(qmi->event_wq);
+	kfree(qmi);
 	ar_snoc->qmi = NULL;
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.2 202/249] ath10k: destroy sdio workqueue while remove sdio module

[Sasha Levin]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit 3ed39f8e747a7aafeec07bb244f2c3a1bdca5730 ]

The workqueue need to flush and destory while remove sdio module,
otherwise it will have thread which is not destory after remove
sdio modules.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 73ef3e75d199..28bdf0212538 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2081,6 +2081,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
 	cancel_work_sync(&ar_sdio->wr_async_work);
 	ath10k_core_unregister(ar);
 	ath10k_core_destroy(ar);
+
+	flush_workqueue(ar_sdio->workqueue);
+	destroy_workqueue(ar_sdio->workqueue);
 }
 
 static const struct sdio_device_id ath10k_sdio_devices[] = {
-- 
2.20.1

[PATCH AUTOSEL 5.2 203/249] net: mvpp2: prs: Don't override the sign bit in SRAM parser shift

[Sasha Levin]

From: Maxime Chevallier <maxime.chevallier@bootlin.com>

[ Upstream commit 8ec3ede559956f8ad58db7b57d25ac724bab69e9 ]

The Header Parser allows identifying various fields in the packet
headers, used for various kind of filtering and classification
steps.

This is a re-entrant process, where the offset in the packet header
depends on the previous lookup results. This offset is represented in
the SRAM results of the TCAM, as a shift to be operated.

This shift can be negative in some cases, such as in IPv6 parsing.

This commit prevents overriding the sign bit when setting the shift
value, which could cause instabilities when parsing IPv6 flows.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Suggested-by: Alan Winkowski <walan@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index ae2240074d8e..5692c6087bbb 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -312,7 +312,8 @@ static void mvpp2_prs_sram_shift_set(struct mvpp2_prs_entry *pe, int shift,
 	}
 
 	/* Set value */
-	pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] = shift & MVPP2_PRS_SRAM_SHIFT_MASK;
+	pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] |=
+		shift & MVPP2_PRS_SRAM_SHIFT_MASK;
 
 	/* Reset and set operation */
 	mvpp2_prs_sram_bits_clear(pe, MVPP2_PRS_SRAM_OP_SEL_SHIFT_OFFS,
-- 
2.20.1

[PATCH AUTOSEL 5.2 204/249] igb: clear out skb->tstamp after reading the txtime

[Sasha Levin]

From: Vedang Patel <vedang.patel@intel.com>

[ Upstream commit 1e08511d5d01884a3c9070afd52a47799312074a ]

If a packet which is utilizing the launchtime feature (via SO_TXTIME socket
option) also requests the hardware transmit timestamp, the hardware
timestamp is not delivered to the userspace. This is because the value in
skb->tstamp is mistaken as the software timestamp.

Applications, like ptp4l, request a hardware timestamp by setting the
SOF_TIMESTAMPING_TX_HARDWARE socket option. Whenever a new timestamp is
detected by the driver (this work is done in igb_ptp_tx_work() which calls
igb_ptp_tx_hwtstamps() in igb_ptp.c[1]), it will queue the timestamp in the
ERR_QUEUE for the userspace to read. When the userspace is ready, it will
issue a recvmsg() call to collect this timestamp.  The problem is in this
recvmsg() call. If the skb->tstamp is not cleared out, it will be
interpreted as a software timestamp and the hardware tx timestamp will not
be successfully sent to the userspace. Look at skb_is_swtx_tstamp() and the
callee function __sock_recv_timestamp() in net/socket.c for more details.

Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 39f33afc479c..005c1693efc8 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -5687,6 +5687,7 @@ static void igb_tx_ctxtdesc(struct igb_ring *tx_ring,
 	 */
 	if (tx_ring->launchtime_enable) {
 		ts = ns_to_timespec64(first->skb->tstamp);
+		first->skb->tstamp = 0;
 		context_desc->seqnum_seed = cpu_to_le32(ts.tv_nsec / 32);
 	} else {
 		context_desc->seqnum_seed = 0;
-- 
2.20.1

[PATCH AUTOSEL 5.2 205/249] net: hns3: add Asym Pause support to fix autoneg problem

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit bc3781edcea017aa1a29abd953b776cdba298ce2 ]

Local device and link partner config auto-negotiation on both,
local device config pause frame use as: rx on/tx off,
link partner config pause frame use as: rx off/tx on.

We except the result is:
Local device:
Autonegotiate:  on
RX:             on
TX:             off
RX negotiated:  on
TX negotiated:  off

Link partner:
Autonegotiate:  on
RX:             off
TX:             on
RX negotiated:  off
TX negotiated:  on

But actually, the result of Local device and link partner is both:
Autonegotiate:  on
RX:             off
TX:             off
RX negotiated:  off
TX negotiated:  off

The root cause is that the supported flag is has only Pause,
reference to the function genphy_config_advert():
static int genphy_config_advert(struct phy_device *phydev)
{
	...
	linkmode_and(phydev->advertising, phydev->advertising,
		     phydev->supported);
	...
}
The pause frame use of link partner is rx off/tx on, so its
advertising only set the bit Asym_Pause, and the supported is
only set the bit Pause, so the result of linkmode_and(), is
rx off/tx off.

This patch adds Asym_Pause to the supported flag to fix it.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 7 +++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index f661281de36b..bab04d2d674a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1057,6 +1057,7 @@ static void hclge_parse_copper_link_mode(struct hclge_dev *hdev,
 	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
 	linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
 	linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
 }
 
 static void hclge_parse_link_mode(struct hclge_dev *hdev, u8 speed_ability)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 1e8134892d77..32d6a59b731a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -224,6 +224,13 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle)
 	linkmode_and(phydev->supported, phydev->supported, mask);
 	linkmode_copy(phydev->advertising, phydev->supported);
 
+	/* supported flag is Pause and Asym Pause, but default advertising
+	 * should be rx on, tx on, so need clear Asym Pause in advertising
+	 * flag
+	 */
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+			   phydev->advertising);
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 206/249] net: ethernet: ti: cpsw: Assign OF node to slave devices

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 337d1727a3895775b5e5ef67d3ca0fea2e2ae768 ]

Assign OF node to CPSW slave devices, otherwise it is not possible to
bind e.g. DSA switch to them. Without this patch, the DSA code tries
to find the ethernet device by OF match, but fails to do so because
the slave device has NULL OF node.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpsw.c      | 3 +++
 drivers/net/ethernet/ti/cpsw_priv.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 634fc484a0b3..4e3026f9abed 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2179,6 +2179,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 			return ret;
 		}
 
+		slave_data->slave_node = slave_node;
 		slave_data->phy_node = of_parse_phandle(slave_node,
 							"phy-handle", 0);
 		parp = of_get_property(slave_node, "phy_id", &lenp);
@@ -2330,6 +2331,7 @@ static int cpsw_probe_dual_emac(struct cpsw_priv *priv)
 
 	/* register the network device */
 	SET_NETDEV_DEV(ndev, cpsw->dev);
+	ndev->dev.of_node = cpsw->slaves[1].data->slave_node;
 	ret = register_netdev(ndev);
 	if (ret)
 		dev_err(cpsw->dev, "cpsw: error registering net device\n");
@@ -2507,6 +2509,7 @@ static int cpsw_probe(struct platform_device *pdev)
 
 	/* register the network device */
 	SET_NETDEV_DEV(ndev, dev);
+	ndev->dev.of_node = cpsw->slaves[0].data->slave_node;
 	ret = register_netdev(ndev);
 	if (ret) {
 		dev_err(dev, "error registering net device\n");
diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h
index 04795b97ee71..e32f11da2dce 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.h
+++ b/drivers/net/ethernet/ti/cpsw_priv.h
@@ -272,6 +272,7 @@ struct cpsw_host_regs {
 };
 
 struct cpsw_slave_data {
+	struct device_node *slave_node;
 	struct device_node *phy_node;
 	char		phy_id[MII_BUS_ID_SIZE];
 	int		phy_if;
-- 
2.20.1

[PATCH AUTOSEL 5.2 207/249] ixgbe: Avoid NULL pointer dereference with VF on non-IPsec hw

[Sasha Levin]

From: Dann Frazier <dann.frazier@canonical.com>

[ Upstream commit 92924064106e410cdc015f1dbfc0499309f9f5b1 ]

An ipsec structure will not be allocated if the hardware does not support
offload. Fixes the following Oops:

[  191.045452] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  191.054232] Mem abort info:
[  191.057014]   ESR = 0x96000004
[  191.060057]   Exception class = DABT (current EL), IL = 32 bits
[  191.065963]   SET = 0, FnV = 0
[  191.069004]   EA = 0, S1PTW = 0
[  191.072132] Data abort info:
[  191.074999]   ISV = 0, ISS = 0x00000004
[  191.078822]   CM = 0, WnR = 0
[  191.081780] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000043d9e467
[  191.088382] [0000000000000000] pgd=0000000000000000
[  191.093252] Internal error: Oops: 96000004 [#1] SMP
[  191.098119] Modules linked in: vhost_net vhost tap vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter devlink ebtables ip6table_filter ip6_tables iptable_filter bpfilter ipmi_ssif nls_iso8859_1 input_leds joydev ipmi_si hns_roce_hw_v2 ipmi_devintf hns_roce ipmi_msghandler cppc_cpufreq sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 ses enclosure btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_generic usbhid hid raid6_pq libcrc32c raid1 raid0 multipath linear ixgbevf hibmc_drm ttm
[  191.168607]  drm_kms_helper aes_ce_blk aes_ce_cipher syscopyarea crct10dif_ce sysfillrect ghash_ce qla2xxx sysimgblt sha2_ce sha256_arm64 hisi_sas_v3_hw fb_sys_fops sha1_ce uas nvme_fc mpt3sas ixgbe drm hisi_sas_main nvme_fabrics usb_storage hclge scsi_transport_fc ahci libsas hnae3 raid_class libahci xfrm_algo scsi_transport_sas mdio aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64
[  191.202952] CPU: 94 PID: 0 Comm: swapper/94 Not tainted 4.19.0-rc1+ #11
[  191.209553] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.20.01 04/26/2019
[  191.218064] pstate: 20400089 (nzCv daIf +PAN -UAO)
[  191.222873] pc : ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe]
[  191.228093] lr : ixgbe_msg_task+0x2d0/0x1088 [ixgbe]
[  191.233044] sp : ffff000009b3bcd0
[  191.236346] x29: ffff000009b3bcd0 x28: 0000000000000000
[  191.241647] x27: ffff000009628000 x26: 0000000000000000
[  191.246946] x25: ffff803f652d7600 x24: 0000000000000004
[  191.252246] x23: ffff803f6a718900 x22: 0000000000000000
[  191.257546] x21: 0000000000000000 x20: 0000000000000000
[  191.262845] x19: 0000000000000000 x18: 0000000000000000
[  191.268144] x17: 0000000000000000 x16: 0000000000000000
[  191.273443] x15: 0000000000000000 x14: 0000000100000026
[  191.278742] x13: 0000000100000025 x12: ffff8a5f7fbe0df0
[  191.284042] x11: 000000010000000b x10: 0000000000000040
[  191.289341] x9 : 0000000000001100 x8 : ffff803f6a824fd8
[  191.294640] x7 : ffff803f6a825098 x6 : 0000000000000001
[  191.299939] x5 : ffff000000f0ffc0 x4 : 0000000000000000
[  191.305238] x3 : ffff000028c00000 x2 : ffff803f652d7600
[  191.310538] x1 : 0000000000000000 x0 : ffff000000f205f0
[  191.315838] Process swapper/94 (pid: 0, stack limit = 0x00000000addfed5a)
[  191.322613] Call trace:
[  191.325055]  ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe]
[  191.329927]  ixgbe_msg_task+0x2d0/0x1088 [ixgbe]
[  191.334536]  ixgbe_msix_other+0x274/0x330 [ixgbe]
[  191.339233]  __handle_irq_event_percpu+0x78/0x270
[  191.343924]  handle_irq_event_percpu+0x40/0x98
[  191.348355]  handle_irq_event+0x50/0xa8
[  191.352180]  handle_fasteoi_irq+0xbc/0x148
[  191.356263]  generic_handle_irq+0x34/0x50
[  191.360259]  __handle_domain_irq+0x68/0xc0
[  191.364343]  gic_handle_irq+0x84/0x180
[  191.368079]  el1_irq+0xe8/0x180
[  191.371208]  arch_cpu_idle+0x30/0x1a8
[  191.374860]  do_idle+0x1dc/0x2a0
[  191.378077]  cpu_startup_entry+0x2c/0x30
[  191.381988]  secondary_start_kernel+0x150/0x1e0
[  191.386506] Code: 6b15003f 54000320 f1404a9f 54000060 (79400260)

Fixes: eda0333ac2930 ("ixgbe: add VF IPsec management")
Signed-off-by: Dann Frazier <dann.frazier@canonical.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index ff85ce5791a3..31629fc7e820 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -842,6 +842,9 @@ void ixgbe_ipsec_vf_clear(struct ixgbe_adapter *adapter, u32 vf)
 	struct ixgbe_ipsec *ipsec = adapter->ipsec;
 	int i;
 
+	if (!ipsec)
+		return;
+
 	/* search rx sa table */
 	for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT && ipsec->num_rx_sa; i++) {
 		if (!ipsec->rx_tbl[i].used)
-- 
2.20.1

[PATCH AUTOSEL 5.2 208/249] iwlwifi: mvm: Drop large non sta frames

[Sasha Levin]

From: Andrei Otcheretianski <andrei.otcheretianski@intel.com>

[ Upstream commit ac70499ee97231a418dc1a4d6c9dc102e8f64631 ]

In some buggy scenarios we could possible attempt to transmit frames larger
than maximum MSDU size. Since our devices don't know how to handle this,
it may result in asserts, hangs etc.
This can happen, for example, when we receive a large multicast frame
and try to transmit it back to the air in AP mode.
Since in a legal scenario this should never happen, drop such frames and
warn about it.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index 0c2aabc842f9..96f8d38ea321 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -726,6 +726,9 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb)
 
 	memcpy(&info, skb->cb, sizeof(info));
 
+	if (WARN_ON_ONCE(skb->len > IEEE80211_MAX_DATA_LEN + hdrlen))
+		return -1;
+
 	if (WARN_ON_ONCE(info.flags & IEEE80211_TX_CTL_AMPDU))
 		return -1;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 209/249] bpf: fix uapi bpf_prog_info fields alignment

[Sasha Levin]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit 0472301a28f6cf53a6bc5783e48a2d0bbff4682f ]

Merge commit 1c8c5a9d38f60 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next") undid the
fix from commit 36f9814a494 ("bpf: fix uapi hole for 32 bit compat
applications") by taking the gpl_compatible 1-bit field definition from
commit b85fab0e67b162 ("bpf: Add gpl_compatible flag to struct
bpf_prog_info") as is. That breaks architectures with 16-bit alignment
like m68k. Add 31-bit pad after gpl_compatible to restore alignment of
following fields.

Thanks to Dmitry V. Levin his analysis of this bug history.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/bpf.h       | 1 +
 tools/include/uapi/linux/bpf.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index a8b823c30b43..29a5bc3d5c66 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -3143,6 +3143,7 @@ struct bpf_prog_info {
 	char name[BPF_OBJ_NAME_LEN];
 	__u32 ifindex;
 	__u32 gpl_compatible:1;
+	__u32 :31; /* alignment pad */
 	__u64 netns_dev;
 	__u64 netns_ino;
 	__u32 nr_jited_ksyms;
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index a8b823c30b43..29a5bc3d5c66 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -3143,6 +3143,7 @@ struct bpf_prog_info {
 	char name[BPF_OBJ_NAME_LEN];
 	__u32 ifindex;
 	__u32 gpl_compatible:1;
+	__u32 :31; /* alignment pad */
 	__u64 netns_dev;
 	__u64 netns_ino;
 	__u32 nr_jited_ksyms;
-- 
2.20.1

[PATCH AUTOSEL 5.2 210/249] netfilter: Fix remainder of pseudo-header protocol 0

[Sasha Levin]

From: He Zhe <zhe.he@windriver.com>

[ Upstream commit 5d1549847c76b1ffcf8e388ef4d0f229bdd1d7e8 ]

Since v5.1-rc1, some types of packets do not get unreachable reply with the
following iptables setting. Fox example,

$ iptables -A INPUT -p icmp --icmp-type 8 -j REJECT
$ ping 127.0.0.1 -c 1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
— 127.0.0.1 ping statistics —
1 packets transmitted, 0 received, 100% packet loss, time 0ms

We should have got the following reply from command line, but we did not.
From 127.0.0.1 icmp_seq=1 Destination Port Unreachable

Yi Zhao reported it and narrowed it down to:
7fc38225363d ("netfilter: reject: skip csum verification for protocols that don't support it"),

This is because nf_ip_checksum still expects pseudo-header protocol type 0 for
packets that are of neither TCP or UDP, and thus ICMP packets are mistakenly
treated as TCP/UDP.

This patch corrects the conditions in nf_ip_checksum and all other places that
still call it with protocol 0.

Fixes: 7fc38225363d ("netfilter: reject: skip csum verification for protocols that don't support it")
Reported-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_proto_icmp.c | 2 +-
 net/netfilter/nf_nat_proto.c            | 2 +-
 net/netfilter/utils.c                   | 5 +++--
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/nf_conntrack_proto_icmp.c b/net/netfilter/nf_conntrack_proto_icmp.c
index a824367ed518..dd53e2b20f6b 100644
--- a/net/netfilter/nf_conntrack_proto_icmp.c
+++ b/net/netfilter/nf_conntrack_proto_icmp.c
@@ -218,7 +218,7 @@ int nf_conntrack_icmpv4_error(struct nf_conn *tmpl,
 	/* See ip_conntrack_proto_tcp.c */
 	if (state->net->ct.sysctl_checksum &&
 	    state->hook == NF_INET_PRE_ROUTING &&
-	    nf_ip_checksum(skb, state->hook, dataoff, 0)) {
+	    nf_ip_checksum(skb, state->hook, dataoff, IPPROTO_ICMP)) {
 		icmp_error_log(skb, state, "bad hw icmp checksum");
 		return -NF_ACCEPT;
 	}
diff --git a/net/netfilter/nf_nat_proto.c b/net/netfilter/nf_nat_proto.c
index 07da07788f6b..83a24cc5753b 100644
--- a/net/netfilter/nf_nat_proto.c
+++ b/net/netfilter/nf_nat_proto.c
@@ -564,7 +564,7 @@ int nf_nat_icmp_reply_translation(struct sk_buff *skb,
 
 	if (!skb_make_writable(skb, hdrlen + sizeof(*inside)))
 		return 0;
-	if (nf_ip_checksum(skb, hooknum, hdrlen, 0))
+	if (nf_ip_checksum(skb, hooknum, hdrlen, IPPROTO_ICMP))
 		return 0;
 
 	inside = (void *)skb->data + hdrlen;
diff --git a/net/netfilter/utils.c b/net/netfilter/utils.c
index 06dc55590441..51b454d8fa9c 100644
--- a/net/netfilter/utils.c
+++ b/net/netfilter/utils.c
@@ -17,7 +17,8 @@ __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
 	case CHECKSUM_COMPLETE:
 		if (hook != NF_INET_PRE_ROUTING && hook != NF_INET_LOCAL_IN)
 			break;
-		if ((protocol == 0 && !csum_fold(skb->csum)) ||
+		if ((protocol != IPPROTO_TCP && protocol != IPPROTO_UDP &&
+		    !csum_fold(skb->csum)) ||
 		    !csum_tcpudp_magic(iph->saddr, iph->daddr,
 				       skb->len - dataoff, protocol,
 				       skb->csum)) {
@@ -26,7 +27,7 @@ __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
 		}
 		/* fall through */
 	case CHECKSUM_NONE:
-		if (protocol == 0)
+		if (protocol != IPPROTO_TCP && protocol != IPPROTO_UDP)
 			skb->csum = 0;
 		else
 			skb->csum = csum_tcpudp_nofold(iph->saddr, iph->daddr,
-- 
2.20.1

[PATCH AUTOSEL 5.2 211/249] iwlwifi: dbg: fix debug monitor stop and restart delays

[Sasha Levin]

From: Shahar S Matityahu <shahar.s.matityahu@intel.com>

[ Upstream commit fc838c775f35e272e5cc7ef43853f0b55babbe37 ]

The driver should delay only in recording stop flow between writing to
DBGC_IN_SAMPLE register and DBGC_OUT_CTRL register. Any other delay is
not needed.

Change the following:
1. Remove any unnecessary delays in the flow
2. Increase the delay in the stop recording flow since 100 micro is
   not enough
3. Use usleep_range instead of delay since the driver is allowed to
   sleep in this flow.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Fixes: 5cfe79c8d92a ("iwlwifi: fw: stop and start debugging using host command")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 2 --
 drivers/net/wireless/intel/iwlwifi/fw/dbg.h | 6 ++++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
index 33d7bc5500db..c875e173771c 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
@@ -2303,8 +2303,6 @@ void iwl_fw_dbg_collect_sync(struct iwl_fw_runtime *fwrt)
 	/* start recording again if the firmware is not crashed */
 	if (!test_bit(STATUS_FW_ERROR, &fwrt->trans->status) &&
 	    fwrt->fw->dbg.dest_tlv) {
-		/* wait before we collect the data till the DBGC stop */
-		udelay(500);
 		iwl_fw_dbg_restart_recording(fwrt, &params);
 	}
 }
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.h b/drivers/net/wireless/intel/iwlwifi/fw/dbg.h
index fd0ad220e961..c5c015a66106 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.h
@@ -294,7 +294,10 @@ _iwl_fw_dbg_stop_recording(struct iwl_trans *trans,
 	}
 
 	iwl_write_umac_prph(trans, DBGC_IN_SAMPLE, 0);
-	udelay(100);
+	/* wait for the DBGC to finish writing the internal buffer to DRAM to
+	 * avoid halting the HW while writing
+	 */
+	usleep_range(700, 1000);
 	iwl_write_umac_prph(trans, DBGC_OUT_CTRL, 0);
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 	trans->dbg_rec_on = false;
@@ -324,7 +327,6 @@ _iwl_fw_dbg_restart_recording(struct iwl_trans *trans,
 		iwl_set_bits_prph(trans, MON_BUFF_SAMPLE_CTL, 0x1);
 	} else {
 		iwl_write_umac_prph(trans, DBGC_IN_SAMPLE, params->in_sample);
-		udelay(100);
 		iwl_write_umac_prph(trans, DBGC_OUT_CTRL, params->out_ctrl);
 	}
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 212/249] bnxt_en: Disable bus master during PCI shutdown and driver unload.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit c20dc142dd7b2884b8570eeab323bcd4a84294fa ]

Some chips with older firmware can continue to perform DMA read from
context memory even after the memory has been freed.  In the PCI shutdown
method, we need to call pci_disable_device() to shutdown DMA to prevent
this DMA before we put the device into D3hot.  DMA memory request in
D3hot state will generate PCI fatal error.  Similarly, in the driver
remove method, the context memory should only be freed after DMA has
been shutdown for correctness.

Fixes: 98f04cf0f1fc ("bnxt_en: Check context memory requirements from firmware.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index f758b2e0591f..b9bc829aa9da 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10262,10 +10262,10 @@ static void bnxt_remove_one(struct pci_dev *pdev)
 	bnxt_dcb_free(bp);
 	kfree(bp->edev);
 	bp->edev = NULL;
+	bnxt_cleanup_pci(bp);
 	bnxt_free_ctx_mem(bp);
 	kfree(bp->ctx);
 	bp->ctx = NULL;
-	bnxt_cleanup_pci(bp);
 	bnxt_free_port_stats(bp);
 	free_netdev(dev);
 }
@@ -10859,6 +10859,7 @@ static void bnxt_shutdown(struct pci_dev *pdev)
 
 	if (system_state == SYSTEM_POWER_OFF) {
 		bnxt_clear_int_mode(bp);
+		pci_disable_device(pdev);
 		pci_wake_from_d3(pdev, bp->wol);
 		pci_set_power_state(pdev, PCI_D3hot);
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 213/249] bnxt_en: Fix statistics context reservation logic for RDMA driver.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit d77b1ad8e87dc5a6cd0d9158b097a4817946ca3b ]

The current logic assumes that the RDMA driver uses one statistics
context adjacent to the ones used by the network driver.  This
assumption is not true and the statistics context used by the
RDMA driver is tied to its MSIX base vector.  This wrong assumption
can cause RDMA driver failure after changing ethtool rings on the
network side.  Fix the statistics reservation logic accordingly.

Fixes: 780baad44f0f ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b9bc829aa9da..9090c79387c1 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5508,7 +5508,16 @@ static int bnxt_cp_rings_in_use(struct bnxt *bp)
 
 static int bnxt_get_func_stat_ctxs(struct bnxt *bp)
 {
-	return bp->cp_nr_rings + bnxt_get_ulp_stat_ctxs(bp);
+	int ulp_stat = bnxt_get_ulp_stat_ctxs(bp);
+	int cp = bp->cp_nr_rings;
+
+	if (!ulp_stat)
+		return cp;
+
+	if (bnxt_nq_rings_in_use(bp) > cp + bnxt_get_ulp_msix_num(bp))
+		return bnxt_get_ulp_msix_base(bp) + ulp_stat;
+
+	return cp + ulp_stat;
 }
 
 static bool bnxt_need_reserve_rings(struct bnxt *bp)
@@ -7477,11 +7486,7 @@ unsigned int bnxt_get_avail_cp_rings_for_en(struct bnxt *bp)
 
 unsigned int bnxt_get_avail_stat_ctxs_for_en(struct bnxt *bp)
 {
-	unsigned int stat;
-
-	stat = bnxt_get_max_func_stat_ctxs(bp) - bnxt_get_ulp_stat_ctxs(bp);
-	stat -= bp->cp_nr_rings;
-	return stat;
+	return bnxt_get_max_func_stat_ctxs(bp) - bnxt_get_func_stat_ctxs(bp);
 }
 
 int bnxt_get_avail_msix(struct bnxt *bp, int num)
-- 
2.20.1

[PATCH AUTOSEL 5.2 214/249] bnxt_en: Cap the returned MSIX vectors to the RDMA driver.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 1dbc59fa4bbaa108b641cd65a54f662b75e4ed36 ]

In an earlier commit to improve NQ reservations on 57500 chips, we
set the resv_irqs on the 57500 VFs to the fixed value assigned by
the PF regardless of how many are actually used.  The current
code assumes that resv_irqs minus the ones used by the network driver
must be the ones for the RDMA driver.  This is no longer true and
we may return more MSIX vectors than requested, causing inconsistency.
Fix it by capping the value.

Fixes: 01989c6b69d9 ("bnxt_en: Improve NQ reservations.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
index bfa342a98d08..fc77caf0a076 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
@@ -157,8 +157,10 @@ static int bnxt_req_msix_vecs(struct bnxt_en_dev *edev, int ulp_id,
 
 	if (BNXT_NEW_RM(bp)) {
 		struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
+		int resv_msix;
 
-		avail_msix = hw_resc->resv_irqs - bp->cp_nr_rings;
+		resv_msix = hw_resc->resv_irqs - bp->cp_nr_rings;
+		avail_msix = min_t(int, resv_msix, avail_msix);
 		edev->ulp_tbl[ulp_id].msix_requested = avail_msix;
 	}
 	bnxt_fill_msix_vecs(bp, ent);
-- 
2.20.1

[PATCH AUTOSEL 5.2 220/249] vxlan: do not destroy fdb if register_netdevice() is failed

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 7c31e54aeee517d1318dfc0bde9fa7de75893dc6 ]

__vxlan_dev_create() destroys FDB using specific pointer which indicates
a fdb when error occurs.
But that pointer should not be used when register_netdevice() fails because
register_netdevice() internally destroys fdb when error occurs.

This patch makes vxlan_fdb_create() to do not link fdb entry to vxlan dev
internally.
Instead, a new function vxlan_fdb_insert() is added to link fdb to vxlan
dev.

vxlan_fdb_insert() is called after calling register_netdevice().
This routine can avoid situation that ->ndo_uninit() destroys fdb entry
in error path of register_netdevice().
Hence, error path of __vxlan_dev_create() routine can have an opportunity
to destroy default fdb entry by hand.

Test command
    ip link add bonding_masters type vxlan id 0 group 239.1.1.1 \
	    dev enp0s9 dstport 4789

Splat looks like:
[  213.392816] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  213.401257] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  213.402178] CPU: 0 PID: 1414 Comm: ip Not tainted 5.2.0-rc5+ #256
[  213.402178] RIP: 0010:vxlan_fdb_destroy+0x120/0x220 [vxlan]
[  213.402178] Code: df 48 8b 2b 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 06 01 00 00 4c 8b 63 08 48 b8 00 00 00 00 00 fc d
[  213.402178] RSP: 0018:ffff88810cb9f0a0 EFLAGS: 00010202
[  213.402178] RAX: dffffc0000000000 RBX: ffff888101d4a8c8 RCX: 0000000000000000
[  213.402178] RDX: 1bd5a00000000040 RSI: ffff888101d4a8c8 RDI: ffff888101d4a8d0
[  213.402178] RBP: 0000000000000000 R08: fffffbfff22b72d9 R09: 0000000000000000
[  213.402178] R10: 00000000ffffffef R11: 0000000000000000 R12: dead000000000200
[  213.402178] R13: ffff88810cb9f1f8 R14: ffff88810efccda0 R15: ffff88810efccda0
[  213.402178] FS:  00007f7f6621a0c0(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
[  213.402178] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  213.402178] CR2: 000055746f0807d0 CR3: 00000001123e0000 CR4: 00000000001006f0
[  213.402178] Call Trace:
[  213.402178]  __vxlan_dev_create+0x3a9/0x7d0 [vxlan]
[  213.402178]  ? vxlan_changelink+0x740/0x740 [vxlan]
[  213.402178]  ? rcu_read_unlock+0x60/0x60 [vxlan]
[  213.402178]  ? __kasan_kmalloc.constprop.3+0xa0/0xd0
[  213.402178]  vxlan_newlink+0x8d/0xc0 [vxlan]
[  213.402178]  ? __vxlan_dev_create+0x7d0/0x7d0 [vxlan]
[  213.554119]  ? __netlink_ns_capable+0xc3/0xf0
[  213.554119]  __rtnl_newlink+0xb75/0x1180
[  213.554119]  ? rtnl_link_unregister+0x230/0x230
[ ... ]

Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 37 +++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 083f3f0bf37f..b4283f52a09d 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -804,6 +804,14 @@ static struct vxlan_fdb *vxlan_fdb_alloc(struct vxlan_dev *vxlan,
 	return f;
 }
 
+static void vxlan_fdb_insert(struct vxlan_dev *vxlan, const u8 *mac,
+			     __be32 src_vni, struct vxlan_fdb *f)
+{
+	++vxlan->addrcnt;
+	hlist_add_head_rcu(&f->hlist,
+			   vxlan_fdb_head(vxlan, mac, src_vni));
+}
+
 static int vxlan_fdb_create(struct vxlan_dev *vxlan,
 			    const u8 *mac, union vxlan_addr *ip,
 			    __u16 state, __be16 port, __be32 src_vni,
@@ -829,18 +837,13 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan,
 		return rc;
 	}
 
-	++vxlan->addrcnt;
-	hlist_add_head_rcu(&f->hlist,
-			   vxlan_fdb_head(vxlan, mac, src_vni));
-
 	*fdb = f;
 
 	return 0;
 }
 
-static void vxlan_fdb_free(struct rcu_head *head)
+static void __vxlan_fdb_free(struct vxlan_fdb *f)
 {
-	struct vxlan_fdb *f = container_of(head, struct vxlan_fdb, rcu);
 	struct vxlan_rdst *rd, *nd;
 
 	list_for_each_entry_safe(rd, nd, &f->remotes, list) {
@@ -850,6 +853,13 @@ static void vxlan_fdb_free(struct rcu_head *head)
 	kfree(f);
 }
 
+static void vxlan_fdb_free(struct rcu_head *head)
+{
+	struct vxlan_fdb *f = container_of(head, struct vxlan_fdb, rcu);
+
+	__vxlan_fdb_free(f);
+}
+
 static void vxlan_fdb_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f,
 			      bool do_notify, bool swdev_notify)
 {
@@ -977,6 +987,7 @@ static int vxlan_fdb_update_create(struct vxlan_dev *vxlan,
 	if (rc < 0)
 		return rc;
 
+	vxlan_fdb_insert(vxlan, mac, src_vni, f);
 	rc = vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_NEWNEIGH,
 			      swdev_notify, extack);
 	if (rc)
@@ -3571,12 +3582,17 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
 	if (err)
 		goto errout;
 
-	/* notify default fdb entry */
 	if (f) {
+		vxlan_fdb_insert(vxlan, all_zeros_mac,
+				 vxlan->default_dst.remote_vni, f);
+
+		/* notify default fdb entry */
 		err = vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f),
 				       RTM_NEWNEIGH, true, extack);
-		if (err)
-			goto errout;
+		if (err) {
+			vxlan_fdb_destroy(vxlan, f, false, false);
+			goto unregister;
+		}
 	}
 
 	list_add(&vxlan->next, &vn->vxlan_list);
@@ -3588,7 +3604,8 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
 	 * destroy the entry by hand here.
 	 */
 	if (f)
-		vxlan_fdb_destroy(vxlan, f, false, false);
+		__vxlan_fdb_free(f);
+unregister:
 	if (unregister)
 		unregister_netdevice(dev);
 	return err;
-- 
2.20.1

[PATCH AUTOSEL 5.2 221/249] bnx2x: Prevent ptp_task to be rescheduled indefinitely

[Sasha Levin]

From: "Guilherme G. Piccoli" <gpiccoli@canonical.com>

[ Upstream commit 3c91f25c2f72ba6001775a5932857c1d2131c531 ]

Currently bnx2x ptp worker tries to read a register with timestamp
information in case of TX packet timestamping and in case it fails,
the routine reschedules itself indefinitely. This was reported as a
kworker always at 100% of CPU usage, which was narrowed down to be
bnx2x ptp_task.

By following the ioctl handler, we could narrow down the problem to
an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with
RX filter zeroed; this isn't reproducible for example with ptp4l
(from linuxptp) since this tool requests a supported RX filter.
It seems NIC FW timestamp mechanism cannot work well with
RX_FILTER_NONE - driver's PTP filter init routine skips a register
write to the adapter if there's not a supported filter request.

This patch addresses the problem of bnx2x ptp thread's everlasting
reschedule by retrying the register read 10 times; between the read
attempts the thread sleeps for an increasing amount of time starting
in 1ms to give FW some time to perform the timestamping. If it still
fails after all retries, we bail out in order to prevent an unbound
resource consumption from bnx2x.

The patch also adds an ethtool statistic for accounting the skipped
TX timestamp packets and it reduces the priority of timestamping
error messages to prevent log flooding. The code was tested using
both linuxptp and chrony.

Reported-and-tested-by: Przemyslaw Hausman <przemyslaw.hausman@canonical.com>
Suggested-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c   |  5 ++-
 .../ethernet/broadcom/bnx2x/bnx2x_ethtool.c   |  4 ++-
 .../net/ethernet/broadcom/bnx2x/bnx2x_main.c  | 33 ++++++++++++++-----
 .../net/ethernet/broadcom/bnx2x/bnx2x_stats.h |  3 ++
 4 files changed, 34 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 008ad0ca89ba..c12c1bab0fe4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3857,9 +3857,12 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
 		if (!(bp->flags & TX_TIMESTAMPING_EN)) {
+			bp->eth_stats.ptp_skip_tx_ts++;
 			BNX2X_ERR("Tx timestamping was not enabled, this packet will not be timestamped\n");
 		} else if (bp->ptp_tx_skb) {
-			BNX2X_ERR("The device supports only a single outstanding packet to timestamp, this packet will not be timestamped\n");
+			bp->eth_stats.ptp_skip_tx_ts++;
+			netdev_err_once(bp->dev,
+					"Device supports only a single outstanding packet to timestamp, this packet won't be timestamped\n");
 		} else {
 			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 			/* schedule check for Tx timestamp */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 51fc845de31a..4a0ba6801c9e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -182,7 +182,9 @@ static const struct {
 	{ STATS_OFFSET32(driver_filtered_tx_pkt),
 				4, false, "driver_filtered_tx_pkt" },
 	{ STATS_OFFSET32(eee_tx_lpi),
-				4, true, "Tx LPI entry count"}
+				4, true, "Tx LPI entry count"},
+	{ STATS_OFFSET32(ptp_skip_tx_ts),
+				4, false, "ptp_skipped_tx_tstamp" },
 };
 
 #define BNX2X_NUM_STATS		ARRAY_SIZE(bnx2x_stats_arr)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 03ac10b1cd1e..2cc14db8f0ec 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -15214,11 +15214,24 @@ static void bnx2x_ptp_task(struct work_struct *work)
 	u32 val_seq;
 	u64 timestamp, ns;
 	struct skb_shared_hwtstamps shhwtstamps;
+	bool bail = true;
+	int i;
+
+	/* FW may take a while to complete timestamping; try a bit and if it's
+	 * still not complete, may indicate an error state - bail out then.
+	 */
+	for (i = 0; i < 10; i++) {
+		/* Read Tx timestamp registers */
+		val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
+				 NIG_REG_P0_TLLH_PTP_BUF_SEQID);
+		if (val_seq & 0x10000) {
+			bail = false;
+			break;
+		}
+		msleep(1 << i);
+	}
 
-	/* Read Tx timestamp registers */
-	val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
-			 NIG_REG_P0_TLLH_PTP_BUF_SEQID);
-	if (val_seq & 0x10000) {
+	if (!bail) {
 		/* There is a valid timestamp value */
 		timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB :
 				   NIG_REG_P0_TLLH_PTP_BUF_TS_MSB);
@@ -15233,16 +15246,18 @@ static void bnx2x_ptp_task(struct work_struct *work)
 		memset(&shhwtstamps, 0, sizeof(shhwtstamps));
 		shhwtstamps.hwtstamp = ns_to_ktime(ns);
 		skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps);
-		dev_kfree_skb_any(bp->ptp_tx_skb);
-		bp->ptp_tx_skb = NULL;
 
 		DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n",
 		   timestamp, ns);
 	} else {
-		DP(BNX2X_MSG_PTP, "There is no valid Tx timestamp yet\n");
-		/* Reschedule to keep checking for a valid timestamp value */
-		schedule_work(&bp->ptp_task);
+		DP(BNX2X_MSG_PTP,
+		   "Tx timestamp is not recorded (register read=%u)\n",
+		   val_seq);
+		bp->eth_stats.ptp_skip_tx_ts++;
 	}
+
+	dev_kfree_skb_any(bp->ptp_tx_skb);
+	bp->ptp_tx_skb = NULL;
 }
 
 void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
index b2644ed13d06..d55e63692cf3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
@@ -207,6 +207,9 @@ struct bnx2x_eth_stats {
 	u32 driver_filtered_tx_pkt;
 	/* src: Clear-on-Read register; Will not survive PMF Migration */
 	u32 eee_tx_lpi;
+
+	/* PTP */
+	u32 ptp_skip_tx_ts;
 };
 
 struct bnx2x_eth_q_stats {
-- 
2.20.1

[PATCH AUTOSEL 5.2 222/249] net: usb: asix: init MAC address buffers

[Sasha Levin]

From: Phong Tran <tranmanphong@gmail.com>

[ Upstream commit 78226f6eaac80bf30256a33a4926c194ceefdf36 ]

This is for fixing bug KMSAN: uninit-value in ax88772_bind

Tested by
https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ

Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com

syzbot found the following crash on:

HEAD commit:    f75e4cfe kmsan: use kmsan_handle_urb() in urb.c
git tree:       kmsan
console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000
kernel config:
https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a
dashboard link:
https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e
compiler:       clang version 9.0.0 (/home/glider/llvm/clang
06d00afa61eef8f7f501ebdb4e8612ea43ec2d78)
syz repro:
https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000
C reproducer:   https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000

==================================================================
BUG: KMSAN: uninit-value in is_valid_ether_addr
include/linux/etherdevice.h:200 [inline]
BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr
drivers/net/usb/asix_devices.c:73 [inline]
BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0
drivers/net/usb/asix_devices.c:724
CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x191/0x1f0 lib/dump_stack.c:113
  kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
  __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
  is_valid_ether_addr include/linux/etherdevice.h:200 [inline]
  asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline]
  ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724
  usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728
  usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361
  really_probe+0xdae/0x1d80 drivers/base/dd.c:513
  driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
  __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
  bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
  __device_attach+0x454/0x730 drivers/base/dd.c:844
  device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
  bus_probe_device+0x137/0x390 drivers/base/bus.c:514
  device_add+0x288d/0x30e0 drivers/base/core.c:2106
  usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027
  generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210
  usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266
  really_probe+0xdae/0x1d80 drivers/base/dd.c:513
  driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
  __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
  bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
  __device_attach+0x454/0x730 drivers/base/dd.c:844
  device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
  bus_probe_device+0x137/0x390 drivers/base/bus.c:514
  device_add+0x288d/0x30e0 drivers/base/core.c:2106
  usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534
  hub_port_connect drivers/usb/core/hub.c:5089 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
  port_event drivers/usb/core/hub.c:5350 [inline]
  hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432
  process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269
  process_scheduled_works kernel/workqueue.c:2331 [inline]
  worker_thread+0x189c/0x2460 kernel/workqueue.c:2417
  kthread+0x4b5/0x4f0 kernel/kthread.c:254
  ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/asix_devices.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index c9bc96310ed4..ef548beba684 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -226,7 +226,7 @@ static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
-	u8 buf[ETH_ALEN];
+	u8 buf[ETH_ALEN] = {0};
 	int i;
 	unsigned long gpio_bits = dev->driver_info->data;
 
@@ -677,7 +677,7 @@ static int asix_resume(struct usb_interface *intf)
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret, i;
-	u8 buf[ETH_ALEN], chipcode = 0;
+	u8 buf[ETH_ALEN] = {0}, chipcode = 0;
 	u32 phyid;
 	struct asix_common_private *priv;
 
@@ -1061,7 +1061,7 @@ static const struct net_device_ops ax88178_netdev_ops = {
 static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret;
-	u8 buf[ETH_ALEN];
+	u8 buf[ETH_ALEN] = {0};
 
 	usbnet_get_endpoints(dev,intf);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 224/249] libbpf: fix GCC8 warning for strncpy

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit cdfc7f888c2a355b01308e97c6df108f1c2b64e8 ]

GCC8 started emitting warning about using strncpy with number of bytes
exactly equal destination size, which is generally unsafe, as can lead
to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number
of bytes to ensure name is always zero-terminated.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/xsk.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index 38667b62f1fe..8a7a05bc657d 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -337,7 +337,8 @@ static int xsk_get_max_queues(struct xsk_socket *xsk)
 
 	channels.cmd = ETHTOOL_GCHANNELS;
 	ifr.ifr_data = (void *)&channels;
-	strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ);
+	strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1);
+	ifr.ifr_name[IFNAMSIZ - 1] = '\0';
 	err = ioctl(fd, SIOCETHTOOL, &ifr);
 	if (err && errno != EOPNOTSUPP) {
 		ret = -errno;
-- 
2.20.1

[PATCH AUTOSEL 5.2 225/249] bpf, libbpf, smatch: Fix potential NULL pointer dereference

[Sasha Levin]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit 33bae185f74d49a0d7b1bfaafb8e959efce0f243 ]

Based on the following report from Smatch, fix the potential NULL
pointer dereference check:

  tools/lib/bpf/libbpf.c:3493
  bpf_prog_load_xattr() warn: variable dereferenced before check 'attr'
  (see line 3483)

  3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
  3480                         struct bpf_object **pobj, int *prog_fd)
  3481 {
  3482         struct bpf_object_open_attr open_attr = {
  3483                 .file           = attr->file,
  3484                 .prog_type      = attr->prog_type,
                                         ^^^^^^
  3485         };

At the head of function, it directly access 'attr' without checking
if it's NULL pointer. This patch moves the values assignment after
validating 'attr' and 'attr->file'.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 151f7ac1882e..3865a5d27251 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3487,10 +3487,7 @@ int bpf_prog_load(const char *file, enum bpf_prog_type type,
 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
 			struct bpf_object **pobj, int *prog_fd)
 {
-	struct bpf_object_open_attr open_attr = {
-		.file		= attr->file,
-		.prog_type	= attr->prog_type,
-	};
+	struct bpf_object_open_attr open_attr = {};
 	struct bpf_program *prog, *first_prog = NULL;
 	enum bpf_attach_type expected_attach_type;
 	enum bpf_prog_type prog_type;
@@ -3503,6 +3500,9 @@ int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
 	if (!attr->file)
 		return -EINVAL;
 
+	open_attr.file = attr->file;
+	open_attr.prog_type = attr->prog_type;
+
 	obj = bpf_object__open_xattr(&open_attr);
 	if (IS_ERR_OR_NULL(obj))
 		return -ENOENT;
-- 
2.20.1

[PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Sasha Levin]

From: Jiri Benc <jbenc@redhat.com>

[ Upstream commit 11aca65ec4db09527d3e9b6b41a0615b7da4386b ]

Selftests are reporting this failure in test_lwt_seg6local.sh:

+ ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2
Error fetching program/map!
Failed to parse eBPF program: Operation not permitted

The problem is __attribute__((always_inline)) alone is not enough to prevent
clang from inserting those functions in .text. In that case, .text is not
marked as relocateable.

See the output of objdump -h test_lwt_seg6local.o:

Idx Name          Size      VMA               LMA               File off  Algn
  0 .text         00003530  0000000000000000  0000000000000000  00000040  2**3
                  CONTENTS, ALLOC, LOAD, READONLY, CODE

This causes the iproute bpf loader to fail in bpf_fetch_prog_sec:
bpf_has_call_data returns true but bpf_fetch_prog_relo fails as there's no
relocateable .text section in the file.

To fix this, convert to 'static __always_inline'.

v2: Use 'static __always_inline' instead of 'static inline
    __attribute__((always_inline))'

Fixes: c99a84eac026 ("selftests/bpf: test for seg6local End.BPF action")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../testing/selftests/bpf/progs/test_lwt_seg6local.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/test_lwt_seg6local.c b/tools/testing/selftests/bpf/progs/test_lwt_seg6local.c
index 0575751bc1bc..e2f6ed0a583d 100644
--- a/tools/testing/selftests/bpf/progs/test_lwt_seg6local.c
+++ b/tools/testing/selftests/bpf/progs/test_lwt_seg6local.c
@@ -61,7 +61,7 @@ struct sr6_tlv_t {
 	unsigned char value[0];
 } BPF_PACKET_HEADER;
 
-__attribute__((always_inline)) struct ip6_srh_t *get_srh(struct __sk_buff *skb)
+static __always_inline struct ip6_srh_t *get_srh(struct __sk_buff *skb)
 {
 	void *cursor, *data_end;
 	struct ip6_srh_t *srh;
@@ -95,7 +95,7 @@ __attribute__((always_inline)) struct ip6_srh_t *get_srh(struct __sk_buff *skb)
 	return srh;
 }
 
-__attribute__((always_inline))
+static __always_inline
 int update_tlv_pad(struct __sk_buff *skb, uint32_t new_pad,
 		   uint32_t old_pad, uint32_t pad_off)
 {
@@ -125,7 +125,7 @@ int update_tlv_pad(struct __sk_buff *skb, uint32_t new_pad,
 	return 0;
 }
 
-__attribute__((always_inline))
+static __always_inline
 int is_valid_tlv_boundary(struct __sk_buff *skb, struct ip6_srh_t *srh,
 			  uint32_t *tlv_off, uint32_t *pad_size,
 			  uint32_t *pad_off)
@@ -184,7 +184,7 @@ int is_valid_tlv_boundary(struct __sk_buff *skb, struct ip6_srh_t *srh,
 	return 0;
 }
 
-__attribute__((always_inline))
+static __always_inline
 int add_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh, uint32_t tlv_off,
 	    struct sr6_tlv_t *itlv, uint8_t tlv_size)
 {
@@ -228,7 +228,7 @@ int add_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh, uint32_t tlv_off,
 	return update_tlv_pad(skb, new_pad, pad_size, pad_off);
 }
 
-__attribute__((always_inline))
+static __always_inline
 int delete_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh,
 	       uint32_t tlv_off)
 {
@@ -266,7 +266,7 @@ int delete_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh,
 	return update_tlv_pad(skb, new_pad, pad_size, pad_off);
 }
 
-__attribute__((always_inline))
+static __always_inline
 int has_egr_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh)
 {
 	int tlv_offset = sizeof(struct ip6_t) + sizeof(struct ip6_srh_t) +
-- 
2.20.1

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Jiri Benc]

On Mon, 15 Jul 2019 09:46:31 -0400, Sasha Levin wrote:
> From: Jiri Benc <jbenc@redhat.com>
> 
> [ Upstream commit 11aca65ec4db09527d3e9b6b41a0615b7da4386b ]
> 
> Selftests are reporting this failure in test_lwt_seg6local.sh:

I don't think this is critical in any way and I don't think this is a
stable material. How was this selected?

 Jiri

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Sasha Levin]

On Wed, Jul 17, 2019 at 11:43:34AM +0200, Jiri Benc wrote:
>On Mon, 15 Jul 2019 09:46:31 -0400, Sasha Levin wrote:
>> From: Jiri Benc <jbenc@redhat.com>
>>
>> [ Upstream commit 11aca65ec4db09527d3e9b6b41a0615b7da4386b ]
>>
>> Selftests are reporting this failure in test_lwt_seg6local.sh:
>
>I don't think this is critical in any way and I don't think this is a
>stable material. How was this selected?

It fixes a bug, right?

--
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Jiri Benc]

On Wed, 17 Jul 2019 19:47:57 -0400, Sasha Levin wrote:
> It fixes a bug, right?

A bug in selftests. And quite likely, it probably happens only with
some compiler versions.

I don't think patches only touching tools/testing/selftests/ qualify
for stable in general. They don't affect the end users.

 Jiri

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[David Miller]

From: Jiri Benc <jbenc@redhat.com>
Date: Thu, 18 Jul 2019 09:36:54 +0200

> On Wed, 17 Jul 2019 19:47:57 -0400, Sasha Levin wrote:
>> It fixes a bug, right?
> 
> A bug in selftests. And quite likely, it probably happens only with
> some compiler versions.
> 
> I don't think patches only touching tools/testing/selftests/ qualify
> for stable in general. They don't affect the end users.

It has a significant impact on automated testing which lots of
individuals and entities perform, therefore I think it very much is
-stable material.

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Jiri Benc]

On Thu, 18 Jul 2019 11:55:34 -0700 (PDT), David Miller wrote:
> It has a significant impact on automated testing which lots of
> individuals and entities perform, therefore I think it very much is
> -stable material.

Okay.

Thanks,

 Jiri

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Sasha Levin]

On Thu, Jul 18, 2019 at 09:36:54AM +0200, Jiri Benc wrote:
>On Wed, 17 Jul 2019 19:47:57 -0400, Sasha Levin wrote:
>> It fixes a bug, right?
>
>A bug in selftests. And quite likely, it probably happens only with
>some compiler versions.
>
>I don't think patches only touching tools/testing/selftests/ qualify
>for stable in general. They don't affect the end users.

I'd argue that a bug in your tests is just as (if not even more) worse
than a bug in the code.

--
Thanks,
Sasha

[PATCH AUTOSEL 5.2 227/249] bonding: validate ip header before check IPPROTO_IGMP

[Sasha Levin]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 9d1bc24b52fb8c5d859f9a47084bf1179470e04c ]

bond_xmit_roundrobin() checks for IGMP packets but it parses
the IP header even before checking skb->protocol.

We should validate the IP header with pskb_may_pull() before
using iph->protocol.

Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com
Fixes: a2fd940f4cff ("bonding: fix broken multicast with round-robin mode")
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 37 ++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 14 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 799fc38c5c34..b0aab3a0a1bf 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3866,8 +3866,8 @@ static netdev_tx_t bond_xmit_roundrobin(struct sk_buff *skb,
 					struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
-	struct iphdr *iph = ip_hdr(skb);
 	struct slave *slave;
+	int slave_cnt;
 	u32 slave_id;
 
 	/* Start with the curr_active_slave that joined the bond as the
@@ -3876,23 +3876,32 @@ static netdev_tx_t bond_xmit_roundrobin(struct sk_buff *skb,
 	 * send the join/membership reports.  The curr_active_slave found
 	 * will send all of this type of traffic.
 	 */
-	if (iph->protocol == IPPROTO_IGMP && skb->protocol == htons(ETH_P_IP)) {
-		slave = rcu_dereference(bond->curr_active_slave);
-		if (slave)
-			bond_dev_queue_xmit(bond, skb, slave->dev);
-		else
-			bond_xmit_slave_id(bond, skb, 0);
-	} else {
-		int slave_cnt = READ_ONCE(bond->slave_cnt);
+	if (skb->protocol == htons(ETH_P_IP)) {
+		int noff = skb_network_offset(skb);
+		struct iphdr *iph;
 
-		if (likely(slave_cnt)) {
-			slave_id = bond_rr_gen_slave_id(bond);
-			bond_xmit_slave_id(bond, skb, slave_id % slave_cnt);
-		} else {
-			bond_tx_drop(bond_dev, skb);
+		if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph))))
+			goto non_igmp;
+
+		iph = ip_hdr(skb);
+		if (iph->protocol == IPPROTO_IGMP) {
+			slave = rcu_dereference(bond->curr_active_slave);
+			if (slave)
+				bond_dev_queue_xmit(bond, skb, slave->dev);
+			else
+				bond_xmit_slave_id(bond, skb, 0);
+			return NETDEV_TX_OK;
 		}
 	}
 
+non_igmp:
+	slave_cnt = READ_ONCE(bond->slave_cnt);
+	if (likely(slave_cnt)) {
+		slave_id = bond_rr_gen_slave_id(bond);
+		bond_xmit_slave_id(bond, skb, slave_id % slave_cnt);
+	} else {
+		bond_tx_drop(bond_dev, skb);
+	}
 	return NETDEV_TX_OK;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 231/249] tools: bpftool: Fix json dump crash on powerpc

[Sasha Levin]

From: Jiri Olsa <jolsa@redhat.com>

[ Upstream commit aa52bcbe0e72fac36b1862db08b9c09c4caefae3 ]

Michael reported crash with by bpf program in json mode on powerpc:

  # bpftool prog -p dump jited id 14
  [{
        "name": "0xd00000000a9aa760",
        "insns": [{
                "pc": "0x0",
                "operation": "nop",
                "operands": [null
                ]
            },{
                "pc": "0x4",
                "operation": "nop",
                "operands": [null
                ]
            },{
                "pc": "0x8",
                "operation": "mflr",
  Segmentation fault (core dumped)

The code is assuming char pointers in format, which is not always
true at least for powerpc. Fixing this by dumping the whole string
into buffer based on its format.

Please note that libopcodes code does not check return values from
fprintf callback, but as per Jakub suggestion returning -1 on allocation
failure so we do the best effort to propagate the error.

Fixes: 107f041212c1 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/jit_disasm.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/tools/bpf/bpftool/jit_disasm.c b/tools/bpf/bpftool/jit_disasm.c
index 3ef3093560ba..bfed711258ce 100644
--- a/tools/bpf/bpftool/jit_disasm.c
+++ b/tools/bpf/bpftool/jit_disasm.c
@@ -11,6 +11,8 @@
  * Licensed under the GNU General Public License, version 2.0 (GPLv2)
  */
 
+#define _GNU_SOURCE
+#include <stdio.h>
 #include <stdarg.h>
 #include <stdint.h>
 #include <stdio.h>
@@ -44,11 +46,13 @@ static int fprintf_json(void *out, const char *fmt, ...)
 	char *s;
 
 	va_start(ap, fmt);
+	if (vasprintf(&s, fmt, ap) < 0)
+		return -1;
+	va_end(ap);
+
 	if (!oper_count) {
 		int i;
 
-		s = va_arg(ap, char *);
-
 		/* Strip trailing spaces */
 		i = strlen(s) - 1;
 		while (s[i] == ' ')
@@ -61,11 +65,10 @@ static int fprintf_json(void *out, const char *fmt, ...)
 	} else if (!strcmp(fmt, ",")) {
 		   /* Skip */
 	} else {
-		s = va_arg(ap, char *);
 		jsonw_string(json_wtr, s);
 		oper_count++;
 	}
-	va_end(ap);
+	free(s);
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 232/249] net: hns3: enable broadcast promisc mode when initializing VF

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 2d5066fc175ea77a733d84df9ef414b34f311641 ]

For revision 0x20, the broadcast promisc is enabled by firmware,
it's unnecessary to enable it when initializing VF.

For revision 0x21, it's necessary to enable broadcast promisc mode
when initializing or re-initializing VF, otherwise, it will be
unable to send and receive promisc packets.

Fixes: f01f5559cac8 ("net: hns3: don't allow vf to enable promisc mode")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 5d53467ee2d2..3b02745605d4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2512,6 +2512,12 @@ static int hclgevf_reset_hdev(struct hclgevf_dev *hdev)
 		return ret;
 	}
 
+	if (pdev->revision >= 0x21) {
+		ret = hclgevf_set_promisc_mode(hdev, true);
+		if (ret)
+			return ret;
+	}
+
 	dev_info(&hdev->pdev->dev, "Reset done\n");
 
 	return 0;
@@ -2591,9 +2597,11 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
 	 * firmware makes sure broadcast packets can be accepted.
 	 * For revision 0x21, default to enable broadcast promisc mode.
 	 */
-	ret = hclgevf_set_promisc_mode(hdev, true);
-	if (ret)
-		goto err_config;
+	if (pdev->revision >= 0x21) {
+		ret = hclgevf_set_promisc_mode(hdev, true);
+		if (ret)
+			goto err_config;
+	}
 
 	/* Initialize RSS for this VF */
 	ret = hclgevf_rss_init_hw(hdev);
-- 
2.20.1

[PATCH AUTOSEL 5.2 233/249] net: hns3: fix port capbility updating issue

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 49b1255603de5183c5e377200be3b3afe0dcdb86 ]

Currently, the driver queries the media port information, and
updates the port capability periodically. But it sets an error
mac->speed_type value, which stops update port capability.

Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index bab04d2d674a..f2bffc05e902 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2592,6 +2592,7 @@ static int hclge_get_sfp_info(struct hclge_dev *hdev, struct hclge_mac *mac)
 		mac->speed_ability = le32_to_cpu(resp->speed_ability);
 		mac->autoneg = resp->autoneg;
 		mac->support_autoneg = resp->autoneg_ability;
+		mac->speed_type = QUERY_ACTIVE_SPEED;
 		if (!resp->active_fec)
 			mac->fec_mode = 0;
 		else
-- 
2.20.1

[PATCH AUTOSEL 5.2 237/249] Bluetooth: 6lowpan: search for destination address in all peers

[Sasha Levin]

From: Josua Mayer <josua.mayer@jm0.eu>

[ Upstream commit b188b03270b7f8568fc714101ce82fbf5e811c5a ]

Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.

For one peer, no checks are performed to see if it is meant to receive
packets for a given address.

As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.

Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/6lowpan.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index 1555b0c6f7ec..9001bf331d56 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -180,10 +180,16 @@ static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev,
 	}
 
 	if (!rt) {
-		nexthop = &lowpan_cb(skb)->gw;
-
-		if (ipv6_addr_any(nexthop))
-			return NULL;
+		if (ipv6_addr_any(&lowpan_cb(skb)->gw)) {
+			/* There is neither route nor gateway,
+			 * probably the destination is a direct peer.
+			 */
+			nexthop = daddr;
+		} else {
+			/* There is a known gateway
+			 */
+			nexthop = &lowpan_cb(skb)->gw;
+		}
 	} else {
 		nexthop = rt6_nexthop(rt, daddr);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 240/249] Bluetooth: Check state in l2cap_disconnect_rsp

[Sasha Levin]

From: Matias Karhumaa <matias.karhumaa@gmail.com>

[ Upstream commit 28261da8a26f4915aa257d12d506c6ba179d961f ]

Because of both sides doing L2CAP disconnection at the same time, it
was possible to receive L2CAP Disconnection Response with CID that was
already freed. That caused problems if CID was already reused and L2CAP
Connection Request with same CID was sent out. Before this patch kernel
deleted channel context regardless of the state of the channel.

Example where leftover Disconnection Response (frame #402) causes local
device to delete L2CAP channel which was not yet connected. This in
turn confuses remote device's stack because same CID is re-used without
properly disconnecting.

Btmon capture before patch:
** snip **
> ACL Data RX: Handle 43 flags 0x02 dlen 8                #394 [hci1] 10.748949
      Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
      RFCOMM: Disconnect (DISC) (0x43)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x53 poll/final 1
         Length: 0
         FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8                #395 [hci1] 10.749062
      Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
      RFCOMM: Unnumbered Ack (UA) (0x63)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x73 poll/final 1
         Length: 0
         FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12               #396 [hci1] 10.749073
      L2CAP: Disconnection Request (0x06) ident 17 len 4
        Destination CID: 65
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5    #397 [hci1] 10.752391
        Num handles: 1
        Handle: 43
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5    #398 [hci1] 10.753394
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12               #399 [hci1] 10.756499
      L2CAP: Disconnection Request (0x06) ident 26 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12               #400 [hci1] 10.756548
      L2CAP: Disconnection Response (0x07) ident 26 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12               #401 [hci1] 10.757459
      L2CAP: Connection Request (0x02) ident 18 len 4
        PSM: 1 (0x0001)
        Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12               #402 [hci1] 10.759148
      L2CAP: Disconnection Response (0x07) ident 17 len 4
        Destination CID: 65
        Source CID: 65
= bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o..   10.759447
> HCI Event: Number of Completed Packets (0x13) plen 5    #403 [hci1] 10.759386
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12               #404 [hci1] 10.760397
      L2CAP: Connection Request (0x02) ident 27 len 4
        PSM: 3 (0x0003)
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16               #405 [hci1] 10.760441
      L2CAP: Connection Response (0x03) ident 27 len 8
        Destination CID: 65
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27               #406 [hci1] 10.760449
      L2CAP: Configure Request (0x04) ident 19 len 19
        Destination CID: 65
        Flags: 0x0000
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1013
        Option: Retransmission and Flow Control (0x04) [mandatory]
          Mode: Basic (0x00)
          TX window size: 0
          Max transmit: 0
          Retransmission timeout: 0
          Monitor timeout: 0
          Maximum PDU size: 0
> HCI Event: Number of Completed Packets (0x13) plen 5    #407 [hci1] 10.761399
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 16               #408 [hci1] 10.762942
      L2CAP: Connection Response (0x03) ident 18 len 8
        Destination CID: 66
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
*snip*

Similar case after the patch:
*snip*
> ACL Data RX: Handle 43 flags 0x02 dlen 8            #22702 [hci0] 1664.411056
      Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
      RFCOMM: Disconnect (DISC) (0x43)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x53 poll/final 1
         Length: 0
         FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8            #22703 [hci0] 1664.411136
      Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
      RFCOMM: Unnumbered Ack (UA) (0x63)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x73 poll/final 1
         Length: 0
         FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12           #22704 [hci0] 1664.411143
      L2CAP: Disconnection Request (0x06) ident 11 len 4
        Destination CID: 65
        Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22705 [hci0] 1664.414009
        Num handles: 1
        Handle: 43
        Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22706 [hci0] 1664.415007
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12           #22707 [hci0] 1664.418674
      L2CAP: Disconnection Request (0x06) ident 17 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12           #22708 [hci0] 1664.418762
      L2CAP: Disconnection Response (0x07) ident 17 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12           #22709 [hci0] 1664.421073
      L2CAP: Connection Request (0x02) ident 12 len 4
        PSM: 1 (0x0001)
        Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12           #22710 [hci0] 1664.421371
      L2CAP: Disconnection Response (0x07) ident 11 len 4
        Destination CID: 65
        Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22711 [hci0] 1664.424082
        Num handles: 1
        Handle: 43
        Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22712 [hci0] 1664.425040
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12           #22713 [hci0] 1664.426103
      L2CAP: Connection Request (0x02) ident 18 len 4
        PSM: 3 (0x0003)
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16           #22714 [hci0] 1664.426186
      L2CAP: Connection Response (0x03) ident 18 len 8
        Destination CID: 66
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27           #22715 [hci0] 1664.426196
      L2CAP: Configure Request (0x04) ident 13 len 19
        Destination CID: 65
        Flags: 0x0000
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1013
        Option: Retransmission and Flow Control (0x04) [mandatory]
          Mode: Basic (0x00)
          TX window size: 0
          Max transmit: 0
          Retransmission timeout: 0
          Monitor timeout: 0
          Maximum PDU size: 0
> ACL Data RX: Handle 43 flags 0x02 dlen 16           #22716 [hci0] 1664.428804
      L2CAP: Connection Response (0x03) ident 12 len 8
        Destination CID: 66
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
*snip*

Fix is to check that channel is in state BT_DISCONN before deleting the
channel.

This bug was found while fuzzing Bluez's OBEX implementation using
Synopsys Defensics.

Reported-by: Matti Kamunen <matti.kamunen@synopsys.com>
Reported-by: Ari Timonen <ari.timonen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 5406d7cd46ad..771e3e17bb6a 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4394,6 +4394,12 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
 
 	l2cap_chan_lock(chan);
 
+	if (chan->state != BT_DISCONN) {
+		l2cap_chan_unlock(chan);
+		mutex_unlock(&conn->chan_lock);
+		return 0;
+	}
+
 	l2cap_chan_hold(chan);
 	l2cap_chan_del(chan, 0);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 241/249] Bluetooth: hidp: NUL terminate a string in the compat ioctl

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit dcae9052ebb0c5b2614de620323d615fcbfda7f8 ]

This change is similar to commit a1616a5ac99e ("Bluetooth: hidp: fix
buffer overflow") but for the compat ioctl.  We take a string from the
user and forgot to ensure that it's NUL terminated.

I have also changed the strncpy() in to strscpy() in hidp_setup_hid().
The difference is the strncpy() doesn't necessarily NUL terminate the
destination string.  Either change would fix the problem but it's nice
to take a belt and suspenders approach and do both.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hidp/core.c | 2 +-
 net/bluetooth/hidp/sock.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index a442e21f3894..5abd423b55fa 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -775,7 +775,7 @@ static int hidp_setup_hid(struct hidp_session *session,
 	hid->version = req->version;
 	hid->country = req->country;
 
-	strncpy(hid->name, req->name, sizeof(hid->name));
+	strscpy(hid->name, req->name, sizeof(hid->name));
 
 	snprintf(hid->phys, sizeof(hid->phys), "%pMR",
 		 &l2cap_pi(session->ctrl_sock->sk)->chan->src);
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 2151913892ce..03be6a4baef3 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -192,6 +192,7 @@ static int hidp_sock_compat_ioctl(struct socket *sock, unsigned int cmd, unsigne
 		ca.version = ca32.version;
 		ca.flags = ca32.flags;
 		ca.idle_to = ca32.idle_to;
+		ca32.name[sizeof(ca32.name) - 1] = '\0';
 		memcpy(ca.name, ca32.name, 128);
 
 		csock = sockfd_lookup(ca.ctrl_sock, &err);
-- 
2.20.1

[PATCH AUTOSEL 5.2 242/249] gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit e30155fd23c9c141cbe7d99b786e10a83a328837 ]

If an invalid role is sent from user space, gtp_encap_enable() will fail.
Then, it should call gtp_encap_disable_sock() but current code doesn't.
It makes memory leak.

Fixes: 91ed81f9abc7 ("gtp: support SGSN-side tunnels")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index fc45b749db46..01fc51892e48 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -843,8 +843,13 @@ static int gtp_encap_enable(struct gtp_dev *gtp, struct nlattr *data[])
 
 	if (data[IFLA_GTP_ROLE]) {
 		role = nla_get_u32(data[IFLA_GTP_ROLE]);
-		if (role > GTP_ROLE_SGSN)
+		if (role > GTP_ROLE_SGSN) {
+			if (sk0)
+				gtp_encap_disable_sock(sk0);
+			if (sk1u)
+				gtp_encap_disable_sock(sk1u);
 			return -EINVAL;
+		}
 	}
 
 	gtp->sk0 = sk0;
-- 
2.20.1

[PATCH AUTOSEL 5.2 243/249] Bluetooth: validate BLE connection interval updates

[Sasha Levin]

From: csonsino <csonsino@gmail.com>

[ Upstream commit c49a8682fc5d298d44e8d911f4fa14690ea9485e ]

Problem: The Linux Bluetooth stack yields complete control over the BLE
connection interval to the remote device.

The Linux Bluetooth stack provides access to the BLE connection interval
min and max values through /sys/kernel/debug/bluetooth/hci0/
conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval.
These values are used for initial BLE connections, but the remote device
has the ability to request a connection parameter update. In the event
that the remote side requests to change the connection interval, the Linux
kernel currently only validates that the desired value is within the
acceptable range in the Bluetooth specification (6 - 3200, corresponding to
7.5ms - 4000ms). There is currently no validation that the desired value
requested by the remote device is within the min/max limits specified in
the conn_min_interval/conn_max_interval configurations. This essentially
leads to Linux yielding complete control over the connection interval to
the remote device.

The proposed patch adds a verification step to the connection parameter
update mechanism, ensuring that the desired value is within the min/max
bounds of the current connection. If the desired value is outside of the
current connection min/max values, then the connection parameter update
request is rejected and the negative response is returned to the remote
device. Recall that the initial connection is established using the local
conn_min_interval/conn_max_interval values, so this allows the Linux
administrator to retain control over the BLE connection interval.

The one downside that I see is that the current default Linux values for
conn_min_interval and conn_max_interval typically correspond to 30ms and
50ms respectively. If this change were accepted, then it is feasible that
some devices would no longer be able to negotiate to their desired
connection interval values. This might be remedied by setting the default
Linux conn_min_interval and conn_max_interval values to the widest
supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same
behavior as the current implementation, where the remote device could
request to change the connection interval value to any value that is
permitted by the Bluetooth specification, and Linux would accept the
desired value.

Signed-off-by: Carey Sonsino <csonsino@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c  | 5 +++++
 net/bluetooth/l2cap_core.c | 9 ++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 9e4fcf406d9c..17c50a98e7f7 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5588,6 +5588,11 @@ static void hci_le_remote_conn_param_req_evt(struct hci_dev *hdev,
 		return send_conn_param_neg_reply(hdev, handle,
 						 HCI_ERROR_UNKNOWN_CONN_ID);
 
+	if (min < hcon->le_conn_min_interval ||
+	    max > hcon->le_conn_max_interval)
+		return send_conn_param_neg_reply(hdev, handle,
+						 HCI_ERROR_INVALID_LL_PARAMS);
+
 	if (hci_check_conn_params(min, max, latency, timeout))
 		return send_conn_param_neg_reply(hdev, handle,
 						 HCI_ERROR_INVALID_LL_PARAMS);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 771e3e17bb6a..32d2be9d6858 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -5297,7 +5297,14 @@ static inline int l2cap_conn_param_update_req(struct l2cap_conn *conn,
 
 	memset(&rsp, 0, sizeof(rsp));
 
-	err = hci_check_conn_params(min, max, latency, to_multiplier);
+	if (min < hcon->le_conn_min_interval ||
+	    max > hcon->le_conn_max_interval) {
+		BT_DBG("requested connection interval exceeds current bounds.");
+		err = -EINVAL;
+	} else {
+		err = hci_check_conn_params(min, max, latency, to_multiplier);
+	}
+
 	if (err)
 		rsp.result = cpu_to_le16(L2CAP_CONN_PARAM_REJECTED);
 	else
-- 
2.20.1

[PATCH AUTOSEL 5.2 244/249] gtp: fix suspicious RCU usage

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit e198987e7dd7d3645a53875151cd6f8fc425b706 ]

gtp_encap_enable_socket() and gtp_encap_destroy() are not protected
by rcu_read_lock(). and it's not safe to write sk->sk_user_data.
This patch make these functions to use lock_sock() instead of
rcu_dereference_sk_user_data().

Test commands:
    gtp-link add gtp1

Splat looks like:
[   83.238315] =============================
[   83.239127] WARNING: suspicious RCU usage
[   83.239702] 5.2.0-rc6+ #49 Not tainted
[   83.240268] -----------------------------
[   83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage!
[   83.243828]
[   83.243828] other info that might help us debug this:
[   83.243828]
[   83.246325]
[   83.246325] rcu_scheduler_active = 2, debug_locks = 1
[   83.247314] 1 lock held by gtp-link/1008:
[   83.248523]  #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0
[   83.251503]
[   83.251503] stack backtrace:
[   83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49
[   83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   83.254562] Call Trace:
[   83.254995]  dump_stack+0x7c/0xbb
[   83.255567]  gtp_encap_enable_socket+0x2df/0x360 [gtp]
[   83.256415]  ? gtp_find_dev+0x1a0/0x1a0 [gtp]
[   83.257161]  ? memset+0x1f/0x40
[   83.257843]  gtp_newlink+0x90/0xa21 [gtp]
[   83.258497]  ? __netlink_ns_capable+0xc3/0xf0
[   83.259260]  __rtnl_newlink+0xb9f/0x11b0
[   83.260022]  ? rtnl_link_unregister+0x230/0x230
[ ... ]

Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 01fc51892e48..61f19e66be55 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -289,12 +289,14 @@ static void gtp_encap_destroy(struct sock *sk)
 {
 	struct gtp_dev *gtp;
 
-	gtp = rcu_dereference_sk_user_data(sk);
+	lock_sock(sk);
+	gtp = sk->sk_user_data;
 	if (gtp) {
 		udp_sk(sk)->encap_type = 0;
 		rcu_assign_sk_user_data(sk, NULL);
 		sock_put(sk);
 	}
+	release_sock(sk);
 }
 
 static void gtp_encap_disable_sock(struct sock *sk)
@@ -796,7 +798,8 @@ static struct sock *gtp_encap_enable_socket(int fd, int type,
 		goto out_sock;
 	}
 
-	if (rcu_dereference_sk_user_data(sock->sk)) {
+	lock_sock(sock->sk);
+	if (sock->sk->sk_user_data) {
 		sk = ERR_PTR(-EBUSY);
 		goto out_sock;
 	}
@@ -812,6 +815,7 @@ static struct sock *gtp_encap_enable_socket(int fd, int type,
 	setup_udp_tunnel_sock(sock_net(sock->sk), sock, &tuncfg);
 
 out_sock:
+	release_sock(sock->sk);
 	sockfd_put(sock);
 	return sk;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 245/249] gtp: fix Illegal context switch in RCU read-side critical section.

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 3f167e1921865b379a9becf03828e7202c7b4917 ]

ipv4_pdp_add() is called in RCU read-side critical section.
So GFP_KERNEL should not be used in the function.
This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL.

Test commands:
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2

Splat looks like:
[  130.618881] =============================
[  130.626382] WARNING: suspicious RCU usage
[  130.626994] 5.2.0-rc6+ #50 Not tainted
[  130.627622] -----------------------------
[  130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section!
[  130.629684]
[  130.629684] other info that might help us debug this:
[  130.629684]
[  130.631022]
[  130.631022] rcu_scheduler_active = 2, debug_locks = 1
[  130.632136] 4 locks held by gtp-tunnel/1025:
[  130.632925]  #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40
[  130.634159]  #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130
[  130.635487]  #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp]
[  130.636936]  #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp]
[  130.638348]
[  130.638348] stack backtrace:
[  130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50
[  130.641318] Call Trace:
[  130.641707]  dump_stack+0x7c/0xbb
[  130.642252]  ___might_sleep+0x2c0/0x3b0
[  130.642862]  kmem_cache_alloc_trace+0x1cd/0x2b0
[  130.643591]  gtp_genl_new_pdp+0x6c5/0x1150 [gtp]
[  130.644371]  genl_family_rcv_msg+0x63a/0x1030
[  130.645074]  ? mutex_lock_io_nested+0x1090/0x1090
[  130.645845]  ? genl_unregister_family+0x630/0x630
[  130.646592]  ? debug_show_all_locks+0x2d0/0x2d0
[  130.647293]  ? check_flags.part.40+0x440/0x440
[  130.648099]  genl_rcv_msg+0xa3/0x130
[ ... ]

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 61f19e66be55..b770335c03c1 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -954,7 +954,7 @@ static int ipv4_pdp_add(struct gtp_dev *gtp, struct sock *sk,
 
 	}
 
-	pctx = kmalloc(sizeof(struct pdp_ctx), GFP_KERNEL);
+	pctx = kmalloc(sizeof(*pctx), GFP_ATOMIC);
 	if (pctx == NULL)
 		return -ENOMEM;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 246/249] gtp: fix use-after-free in gtp_encap_destroy()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 1788b8569f5de27da09087fa3f6580d2aa04cc75 ]

gtp_encap_destroy() is called twice.
1. When interface is deleted.
2. When udp socket is destroyed.
either gtp->sk0 or gtp->sk1u could be freed by sock_put() in
gtp_encap_destroy(). so, when gtp_encap_destroy() is called again,
it would uses freed sk pointer.

patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to
null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected
by rtnl_lock. so, rtnl_lock() is added.

Test command:
   gtp-link add gtp1 &
   killall gtp-link
   ip link del gtp1

Splat looks like:
[   83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0
[   83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008
[   83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50
[   83.188469] Call Trace:
[ ... ]
[   83.200126]  lock_acquire+0x141/0x380
[   83.200575]  ? lock_sock_nested+0x3a/0xf0
[   83.201069]  _raw_spin_lock_bh+0x38/0x70
[   83.201551]  ? lock_sock_nested+0x3a/0xf0
[   83.202044]  lock_sock_nested+0x3a/0xf0
[   83.202520]  gtp_encap_destroy+0x18/0xe0 [gtp]
[   83.203065]  gtp_encap_disable.isra.14+0x13/0x50 [gtp]
[   83.203687]  gtp_dellink+0x56/0x170 [gtp]
[   83.204190]  rtnl_delete_link+0xb4/0x100
[ ... ]
[   83.236513] Allocated by task 976:
[   83.236925]  save_stack+0x19/0x80
[   83.237332]  __kasan_kmalloc.constprop.3+0xa0/0xd0
[   83.237894]  kmem_cache_alloc+0xd8/0x280
[   83.238360]  sk_prot_alloc.isra.42+0x50/0x200
[   83.238874]  sk_alloc+0x32/0x940
[   83.239264]  inet_create+0x283/0xc20
[   83.239684]  __sock_create+0x2dd/0x540
[   83.240136]  __sys_socket+0xca/0x1a0
[   83.240550]  __x64_sys_socket+0x6f/0xb0
[   83.240998]  do_syscall_64+0x9c/0x450
[   83.241466]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   83.242061]
[   83.242249] Freed by task 0:
[   83.242616]  save_stack+0x19/0x80
[   83.243013]  __kasan_slab_free+0x111/0x150
[   83.243498]  kmem_cache_free+0x89/0x250
[   83.244444]  __sk_destruct+0x38f/0x5a0
[   83.245366]  rcu_core+0x7e9/0x1c20
[   83.245766]  __do_softirq+0x213/0x8fa

Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index b770335c03c1..5615cdb7202c 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -285,13 +285,17 @@ static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb)
 	return gtp_rx(pctx, skb, hdrlen, gtp->role);
 }
 
-static void gtp_encap_destroy(struct sock *sk)
+static void __gtp_encap_destroy(struct sock *sk)
 {
 	struct gtp_dev *gtp;
 
 	lock_sock(sk);
 	gtp = sk->sk_user_data;
 	if (gtp) {
+		if (gtp->sk0 == sk)
+			gtp->sk0 = NULL;
+		else
+			gtp->sk1u = NULL;
 		udp_sk(sk)->encap_type = 0;
 		rcu_assign_sk_user_data(sk, NULL);
 		sock_put(sk);
@@ -299,12 +303,19 @@ static void gtp_encap_destroy(struct sock *sk)
 	release_sock(sk);
 }
 
+static void gtp_encap_destroy(struct sock *sk)
+{
+	rtnl_lock();
+	__gtp_encap_destroy(sk);
+	rtnl_unlock();
+}
+
 static void gtp_encap_disable_sock(struct sock *sk)
 {
 	if (!sk)
 		return;
 
-	gtp_encap_destroy(sk);
+	__gtp_encap_destroy(sk);
 }
 
 static void gtp_encap_disable(struct gtp_dev *gtp)
@@ -1043,6 +1054,7 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 	}
 
+	rtnl_lock();
 	rcu_read_lock();
 
 	gtp = gtp_find_dev(sock_net(skb->sk), info->attrs);
@@ -1067,6 +1079,7 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)
 
 out_unlock:
 	rcu_read_unlock();
+	rtnl_unlock();
 	return err;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 247/249] gtp: fix use-after-free in gtp_newlink()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit a2bed90704c68d3763bf24decb1b781a45395de8 ]

Current gtp_newlink() could be called after unregister_pernet_subsys().
gtp_newlink() uses gtp_net but it can be destroyed by
unregister_pernet_subsys().
So unregister_pernet_subsys() should be called after
rtnl_link_unregister().

Test commands:
   #SHELL 1
   while :
   do
	   for i in {1..5}
	   do
		./gtp-link add gtp$i &
	   done
	   killall gtp-link
   done

   #SHELL 2
   while :
   do
	modprobe -rv gtp
   done

Splat looks like:
[  753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp]
[  753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126
[  753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G        W         5.2.0-rc6+ #50
[  753.185801] Call Trace:
[  753.186264]  dump_stack+0x7c/0xbb
[  753.186863]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.187583]  print_address_description+0xc7/0x240
[  753.188382]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.189097]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.189846]  __kasan_report+0x12a/0x16f
[  753.190542]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.191298]  kasan_report+0xe/0x20
[  753.191893]  gtp_newlink+0x9b4/0xa5c [gtp]
[  753.192580]  ? __netlink_ns_capable+0xc3/0xf0
[  753.193370]  __rtnl_newlink+0xb9f/0x11b0
[ ... ]
[  753.241201] Allocated by task 7186:
[  753.241844]  save_stack+0x19/0x80
[  753.242399]  __kasan_kmalloc.constprop.3+0xa0/0xd0
[  753.243192]  __kmalloc+0x13e/0x300
[  753.243764]  ops_init+0xd6/0x350
[  753.244314]  register_pernet_operations+0x249/0x6f0
[ ... ]
[  753.251770] Freed by task 7178:
[  753.252288]  save_stack+0x19/0x80
[  753.252833]  __kasan_slab_free+0x111/0x150
[  753.253962]  kfree+0xc7/0x280
[  753.254509]  ops_free_list.part.11+0x1c4/0x2d0
[  753.255241]  unregister_pernet_operations+0x262/0x390
[ ... ]
[  753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next.
[  753.287241] ------------[ cut here ]------------
[  753.287794] kernel BUG at lib/list_debug.c:25!
[  753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G    B   W         5.2.0-rc6+ #50
[  753.291036] RIP: 0010:__list_add_valid+0x74/0xd0
[  753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b
[  753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286
[  753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000
[  753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69
[  753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21
[  753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878
[  753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458
[  753.299564] FS:  00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000
[  753.300533] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0
[  753.302183] Call Trace:
[  753.302530]  gtp_newlink+0x5f6/0xa5c [gtp]
[  753.303037]  ? __netlink_ns_capable+0xc3/0xf0
[  753.303576]  __rtnl_newlink+0xb9f/0x11b0
[  753.304092]  ? rtnl_link_unregister+0x230/0x230

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 5615cdb7202c..607f38712b4e 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -1382,9 +1382,9 @@ late_initcall(gtp_init);
 
 static void __exit gtp_fini(void)
 {
-	unregister_pernet_subsys(&gtp_net_ops);
 	genl_unregister_family(&gtp_genl_family);
 	rtnl_link_unregister(&gtp_link_ops);
+	unregister_pernet_subsys(&gtp_net_ops);
 
 	pr_info("GTP module unloaded\n");
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 248/249] xdp: fix race on generic receive path

[Sasha Levin]

From: Ilya Maximets <i.maximets@samsung.com>

[ Upstream commit bf0bdd1343efbbf65b4d53aef1fce14acbd79d50 ]

Unlike driver mode, generic xdp receive could be triggered
by different threads on different CPU cores at the same time
leading to the fill and rx queue breakage. For example, this
could happen while sending packets from two processes to the
first interface of veth pair while the second part of it is
open with AF_XDP socket.

Need to take a lock for each generic receive to avoid race.

Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/xdp_sock.h |  2 ++
 net/xdp/xsk.c          | 31 ++++++++++++++++++++++---------
 2 files changed, 24 insertions(+), 9 deletions(-)

diff --git a/include/net/xdp_sock.h b/include/net/xdp_sock.h
index d074b6d60f8a..ac3c047d058c 100644
--- a/include/net/xdp_sock.h
+++ b/include/net/xdp_sock.h
@@ -67,6 +67,8 @@ struct xdp_sock {
 	 * in the SKB destructor callback.
 	 */
 	spinlock_t tx_completion_lock;
+	/* Protects generic receive. */
+	spinlock_t rx_lock;
 	u64 rx_dropped;
 };
 
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index a14e8864e4fa..5e0637db92ea 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -123,13 +123,17 @@ int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
 	u64 addr;
 	int err;
 
-	if (xs->dev != xdp->rxq->dev || xs->queue_id != xdp->rxq->queue_index)
-		return -EINVAL;
+	spin_lock_bh(&xs->rx_lock);
+
+	if (xs->dev != xdp->rxq->dev || xs->queue_id != xdp->rxq->queue_index) {
+		err = -EINVAL;
+		goto out_unlock;
+	}
 
 	if (!xskq_peek_addr(xs->umem->fq, &addr) ||
 	    len > xs->umem->chunk_size_nohr - XDP_PACKET_HEADROOM) {
-		xs->rx_dropped++;
-		return -ENOSPC;
+		err = -ENOSPC;
+		goto out_drop;
 	}
 
 	addr += xs->umem->headroom;
@@ -138,13 +142,21 @@ int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
 	memcpy(buffer, xdp->data_meta, len + metalen);
 	addr += metalen;
 	err = xskq_produce_batch_desc(xs->rx, addr, len);
-	if (!err) {
-		xskq_discard_addr(xs->umem->fq);
-		xsk_flush(xs);
-		return 0;
-	}
+	if (err)
+		goto out_drop;
+
+	xskq_discard_addr(xs->umem->fq);
+	xskq_produce_flush_desc(xs->rx);
 
+	spin_unlock_bh(&xs->rx_lock);
+
+	xs->sk.sk_data_ready(&xs->sk);
+	return 0;
+
+out_drop:
 	xs->rx_dropped++;
+out_unlock:
+	spin_unlock_bh(&xs->rx_lock);
 	return err;
 }
 
@@ -765,6 +777,7 @@ static int xsk_create(struct net *net, struct socket *sock, int protocol,
 
 	xs = xdp_sk(sk);
 	mutex_init(&xs->mutex);
+	spin_lock_init(&xs->rx_lock);
 	spin_lock_init(&xs->tx_completion_lock);
 
 	mutex_lock(&net->xdp.lock);
-- 
2.20.1

[PATCH AUTOSEL 5.2 249/249] net: mvmdio: defer probe of orion-mdio if a clock is not ready

[Sasha Levin]

From: Josua Mayer <josua@solid-run.com>

[ Upstream commit 433a06d7d74e677c40b1148c70c48677ff62fb6b ]

Defer probing of the orion-mdio interface when getting a clock returns
EPROBE_DEFER. This avoids locking up the Armada 8k SoC when mdio is used
before all clocks have been enabled.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvmdio.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index c5dac6bd2be4..903836e334d8 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -321,6 +321,10 @@ static int orion_mdio_probe(struct platform_device *pdev)
 
 	for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
 		dev->clk[i] = of_clk_get(pdev->dev.of_node, i);
+		if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
+			goto out_clk;
+		}
 		if (IS_ERR(dev->clk[i]))
 			break;
 		clk_prepare_enable(dev->clk[i]);
@@ -362,6 +366,7 @@ static int orion_mdio_probe(struct platform_device *pdev)
 	if (dev->err_interrupt > 0)
 		writel(0, dev->regs + MVMDIO_ERR_INT_MASK);
 
+out_clk:
 	for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
 		if (IS_ERR(dev->clk[i]))
 			break;
-- 
2.20.1