netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Awogbemila <awogbemila@google.com>
To: netdev@vger.kernel.org
Cc: David Awogbemila <awogbemila@google.com>,
	Yangchun Fu <yangchun@google.com>
Subject: [PATCH net-next v2 9/9] gve: Enable Link Speed Reporting in the driver.
Date: Tue,  1 Sep 2020 14:51:49 -0700	[thread overview]
Message-ID: <20200901215149.2685117-10-awogbemila@google.com> (raw)
In-Reply-To: <20200901215149.2685117-1-awogbemila@google.com>

This change allows the driver to report the device link speed
when the ethtool command:
	ethtool <nic name>
is run.
Getting the link speed is done via a new admin queue command:
ReportLinkSpeed.

Reviewed-by: Yangchun Fu <yangchun@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
---
 drivers/net/ethernet/google/gve/gve.h         |  4 +++
 drivers/net/ethernet/google/gve/gve_adminq.c  | 31 +++++++++++++++++++
 drivers/net/ethernet/google/gve/gve_adminq.h  |  9 ++++++
 drivers/net/ethernet/google/gve/gve_ethtool.c | 14 ++++++++-
 4 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index bc54059f9b2e..4a8d77013ebe 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -232,6 +232,7 @@ struct gve_priv {
 	u32 adminq_dcfg_device_resources_cnt;
 	u32 adminq_set_driver_parameter_cnt;
 	u32 adminq_report_stats_cnt;
+	u32 adminq_report_link_speed_cnt;
 
 	/* Global stats */
 	u32 interface_up_cnt; /* count of times interface turned up since last reset */
@@ -252,6 +253,9 @@ struct gve_priv {
 	unsigned long service_timer_period;
 	struct timer_list service_timer;
 
+	/* Gvnic device link speed from hypervisor. */
+	u64 link_speed;
+
   /* Gvnic device's dma mask, set during probe. */
 	u8 dma_mask;
 };
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 341a17b36f06..2372e18943b8 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -36,6 +36,7 @@ int gve_adminq_alloc(struct device *dev, struct gve_priv *priv)
 	priv->adminq_dcfg_device_resources_cnt = 0;
 	priv->adminq_set_driver_parameter_cnt = 0;
 	priv->adminq_report_stats_cnt = 0;
+	priv->adminq_report_link_speed_cnt = 0;
 
 	/* Setup Admin queue with the device */
 	iowrite32be(priv->adminq_bus_addr / PAGE_SIZE,
@@ -238,6 +239,9 @@ static int gve_adminq_issue_cmd(struct gve_priv *priv,
 	case GVE_ADMINQ_REPORT_STATS:
 		priv->adminq_report_stats_cnt++;
 		break;
+	case GVE_ADMINQ_REPORT_LINK_SPEED:
+		priv->adminq_report_link_speed_cnt++;
+		break;
 	default:
 		dev_err(&priv->pdev->dev, "unknown AQ command opcode %d\n", opcode);
 	}
@@ -596,3 +600,30 @@ int gve_adminq_report_stats(struct gve_priv *priv, u64 stats_report_len,
 	return gve_adminq_execute_cmd(priv, &cmd);
 }
 
+int gve_adminq_report_link_speed(struct gve_priv *priv)
+{
+	union gve_adminq_command gvnic_cmd;
+	dma_addr_t link_speed_region_bus;
+	__be64 *link_speed_region;
+	int err;
+
+	link_speed_region =
+		dma_alloc_coherent(&priv->pdev->dev, sizeof(*link_speed_region),
+				   &link_speed_region_bus, GFP_KERNEL);
+
+	if (!link_speed_region)
+		return -ENOMEM;
+
+	memset(&gvnic_cmd, 0, sizeof(gvnic_cmd));
+	gvnic_cmd.opcode = cpu_to_be32(GVE_ADMINQ_REPORT_LINK_SPEED);
+	gvnic_cmd.report_link_speed.link_speed_address =
+		cpu_to_be64(link_speed_region_bus);
+
+	err = gve_adminq_execute_cmd(priv, &gvnic_cmd);
+
+	priv->link_speed = be64_to_cpu(*link_speed_region);
+	dma_free_coherent(&priv->pdev->dev, sizeof(*link_speed_region), link_speed_region,
+			  link_speed_region_bus);
+	return err;
+}
+
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 784830f75b7c..281de8326bc5 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -22,6 +22,7 @@ enum gve_adminq_opcodes {
 	GVE_ADMINQ_DECONFIGURE_DEVICE_RESOURCES	= 0x9,
 	GVE_ADMINQ_SET_DRIVER_PARAMETER		= 0xB,
 	GVE_ADMINQ_REPORT_STATS			= 0xC,
+	GVE_ADMINQ_REPORT_LINK_SPEED	= 0xD
 };
 
 /* Admin queue status codes */
@@ -181,6 +182,12 @@ struct gve_adminq_report_stats {
 
 static_assert(sizeof(struct gve_adminq_report_stats) == 24);
 
+struct gve_adminq_report_link_speed {
+	__be64 link_speed_address;
+};
+
+static_assert(sizeof(struct gve_adminq_report_link_speed) == 8);
+
 struct stats {
 	__be32 stat_name;
 	__be32 queue_id;
@@ -228,6 +235,7 @@ union gve_adminq_command {
 			struct gve_adminq_unregister_page_list unreg_page_list;
 			struct gve_adminq_set_driver_parameter set_driver_param;
 			struct gve_adminq_report_stats report_stats;
+			struct gve_adminq_report_link_speed report_link_speed;
 		};
 	};
 	u8 reserved[64];
@@ -255,4 +263,5 @@ int gve_adminq_unregister_page_list(struct gve_priv *priv, u32 page_list_id);
 int gve_adminq_set_mtu(struct gve_priv *priv, u64 mtu);
 int gve_adminq_report_stats(struct gve_priv *priv, u64 stats_report_len,
 			    dma_addr_t stats_report_addr, u64 interval);
+int gve_adminq_report_link_speed(struct gve_priv *priv);
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_ethtool.c b/drivers/net/ethernet/google/gve/gve_ethtool.c
index db5642fe966f..4830c873cd78 100644
--- a/drivers/net/ethernet/google/gve/gve_ethtool.c
+++ b/drivers/net/ethernet/google/gve/gve_ethtool.c
@@ -59,7 +59,7 @@ static const char gve_gstrings_adminq_stats[][ETH_GSTRING_LEN] = {
 	"adminq_create_tx_queue_cnt", "adminq_create_rx_queue_cnt",
 	"adminq_destroy_tx_queue_cnt", "adminq_destroy_rx_queue_cnt",
 	"adminq_dcfg_device_resources_cnt", "adminq_set_driver_parameter_cnt",
-	"adminq_report_stats_cnt",
+	"adminq_report_stats_cnt", "adminq_report_link_speed_cnt"
 };
 
 static const char gve_gstrings_priv_flags[][ETH_GSTRING_LEN] = {
@@ -354,6 +354,7 @@ gve_get_ethtool_stats(struct net_device *netdev,
 	data[i++] = priv->adminq_dcfg_device_resources_cnt;
 	data[i++] = priv->adminq_set_driver_parameter_cnt;
 	data[i++] = priv->adminq_report_stats_cnt;
+	data[i++] = priv->adminq_report_link_speed_cnt;
 }
 
 static void gve_get_channels(struct net_device *netdev,
@@ -506,6 +507,16 @@ static int gve_set_priv_flags(struct net_device *netdev, u32 flags)
 	return 0;
 }
 
+static int gve_get_link_ksettings(struct net_device *netdev,
+				  struct ethtool_link_ksettings *cmd)
+{
+	struct gve_priv *priv = netdev_priv(netdev);
+	int err = gve_adminq_report_link_speed(priv);
+
+	cmd->base.speed = priv->link_speed;
+	return err;
+}
+
 const struct ethtool_ops gve_ethtool_ops = {
 	.get_drvinfo = gve_get_drvinfo,
 	.get_strings = gve_get_strings,
@@ -522,4 +533,5 @@ const struct ethtool_ops gve_ethtool_ops = {
 	.set_tunable = gve_set_tunable,
 	.get_priv_flags = gve_get_priv_flags,
 	.set_priv_flags = gve_set_priv_flags,
+	.get_link_ksettings = gve_get_link_ksettings
 };
-- 
2.28.0.402.g5ffc5be6b7-goog


      parent reply	other threads:[~2020-09-01 21:52 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-01 21:51 [PATCH net-next v2 0/9] Add GVE Features David Awogbemila
2020-09-01 21:51 ` [PATCH net-next v2 1/9] gve: Get and set Rx copybreak via ethtool David Awogbemila
2020-09-01 22:06   ` Andrew Lunn
2020-09-01 21:51 ` [PATCH net-next v2 2/9] gve: Add stats for gve David Awogbemila
2020-09-02  0:28   ` Jakub Kicinski
2020-09-01 21:51 ` [PATCH net-next v2 3/9] gve: Use dev_info/err instead of netif_info/err David Awogbemila
2020-09-01 22:08   ` Andrew Lunn
2020-09-02 18:43     ` David Awogbemila
2020-09-01 21:51 ` [PATCH net-next v2 4/9] gve: Add support for dma_mask register David Awogbemila
2020-09-02  0:34   ` Jakub Kicinski
2020-09-02 18:42     ` David Awogbemila
2020-09-02 23:08       ` David Miller
2020-09-03 16:31         ` David Awogbemila
2020-09-03 18:28           ` Jakub Kicinski
2020-09-01 21:51 ` [PATCH net-next v2 5/9] gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags David Awogbemila
2020-09-02  0:45   ` Jakub Kicinski
2020-09-02 20:39     ` David Awogbemila
2020-09-03  0:05   ` David Awogbemila
2020-09-01 21:51 ` [PATCH net-next v2 6/9] gve: NIC stats for report-stats and for ethtool David Awogbemila
2020-09-01 21:51 ` [PATCH net-next v2 7/9] gve: Batch AQ commands for creating and destroying queues David Awogbemila
2020-09-01 21:51 ` [PATCH net-next v2 8/9] gve: Use link status register to report link status David Awogbemila
2020-09-01 21:51 ` David Awogbemila [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200901215149.2685117-10-awogbemila@google.com \
    --to=awogbemila@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=yangchun@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).