Netdev Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH net v2 0/2] add support for skb with sk ref cloning
@ 2021-02-23  5:53 Oleksij Rempel
  2021-02-23  5:53 ` [PATCH net v2 1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid Oleksij Rempel
  2021-02-23  5:53 ` [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned Oleksij Rempel
  0 siblings, 2 replies; 4+ messages in thread
From: Oleksij Rempel @ 2021-02-23  5:53 UTC (permalink / raw)
  To: mkl, David S. Miller, Jakub Kicinski, Oliver Hartkopp,
	Robin van der Gracht, Johannes Berg
  Cc: Oleksij Rempel, kernel, linux-can, netdev, linux-kernel,
	Eric Dumazet, linux-wireless

changes v2:
- drop mac80211 patch for now, it can go separately if needed

Hello,

this series tries to fix a long standing problem in the CAN echo SKB
handling. The problem shows up if an echo SKB for a SKB that references
an already closed socket is created.

It looks like the mac80211/tx.c has the same problem, see RFC patch 3
for details.

regards,
Oleksij

Oleksij Rempel (2):
  skbuff: skb_clone_sk_optional(): add function to always clone a skb
    and increase refcount on sk if valid
  can: fix ref count warning if socket was closed before skb was cloned

 include/linux/can/skb.h   |  3 +--
 include/linux/skbuff.h    |  1 +
 net/can/af_can.c          |  6 +++---
 net/can/j1939/main.c      |  3 +--
 net/can/j1939/socket.c    |  3 +--
 net/can/j1939/transport.c |  4 +---
 net/core/skbuff.c         | 27 +++++++++++++++++++++++++++
 7 files changed, 35 insertions(+), 12 deletions(-)

-- 
2.29.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH net v2 1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid
  2021-02-23  5:53 [PATCH net v2 0/2] add support for skb with sk ref cloning Oleksij Rempel
@ 2021-02-23  5:53 ` Oleksij Rempel
  2021-02-23  5:53 ` [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned Oleksij Rempel
  1 sibling, 0 replies; 4+ messages in thread
From: Oleksij Rempel @ 2021-02-23  5:53 UTC (permalink / raw)
  To: mkl, David S. Miller, Jakub Kicinski, Oliver Hartkopp,
	Robin van der Gracht, Johannes Berg
  Cc: Oleksij Rempel, kernel, linux-can, netdev, linux-kernel,
	Eric Dumazet, linux-wireless

There already the function skb_clone_sk(), which clones the skb, but
only if the sk is valid.

There are several users in the networking stack, which always need a
clone of a skb with the sk refcount incremented (but only if the sk is
valid). This patch adds such a function.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 include/linux/skbuff.h |  1 +
 net/core/skbuff.c      | 27 +++++++++++++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 6d0a33d1c0db..99d552017508 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -3874,6 +3874,7 @@ static inline void skb_metadata_clear(struct sk_buff *skb)
 	skb_metadata_set(skb, 0);
 }
 
+struct sk_buff *skb_clone_sk_optional(struct sk_buff *skb);
 struct sk_buff *skb_clone_sk(struct sk_buff *skb);
 
 #ifdef CONFIG_NETWORK_PHY_TIMESTAMPING
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 545a472273a5..97341f173fb0 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4671,6 +4671,33 @@ struct sk_buff *sock_dequeue_err_skb(struct sock *sk)
 }
 EXPORT_SYMBOL(sock_dequeue_err_skb);
 
+/**
+ * skb_clone_sk_optional - create clone of skb, and take reference to socket if
+ *                         socket is referenced in original skb
+ * @skb: the skb to clone
+ *
+ * This function always creates a clone of a buffer. If it that holds a valid
+ * reference on sk_refcnt this is increased.
+ */
+struct sk_buff *skb_clone_sk_optional(struct sk_buff *skb)
+{
+	struct sock *sk = skb->sk;
+	struct sk_buff *clone;
+
+	clone = skb_clone(skb, GFP_ATOMIC);
+	if (!clone)
+		return NULL;
+
+	if (!sk || !refcount_inc_not_zero(&sk->sk_refcnt))
+		return clone;
+
+	clone->sk = sk;
+	clone->destructor = sock_efree;
+
+	return clone;
+}
+EXPORT_SYMBOL(skb_clone_sk_optional);
+
 /**
  * skb_clone_sk - create clone of skb, and take reference to socket
  * @skb: the skb to clone
-- 
2.29.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned
  2021-02-23  5:53 [PATCH net v2 0/2] add support for skb with sk ref cloning Oleksij Rempel
  2021-02-23  5:53 ` [PATCH net v2 1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid Oleksij Rempel
@ 2021-02-23  5:53 ` Oleksij Rempel
  2021-02-23  8:55   ` Eric Dumazet
  1 sibling, 1 reply; 4+ messages in thread
From: Oleksij Rempel @ 2021-02-23  5:53 UTC (permalink / raw)
  To: mkl, David S. Miller, Jakub Kicinski, Oliver Hartkopp,
	Robin van der Gracht, Johannes Berg
  Cc: Oleksij Rempel, Andre Naujoks, Eric Dumazet, kernel, linux-can,
	netdev, linux-kernel, linux-wireless

There are two ref count variables controlling the free()ing of a socket:
- struct sock::sk_refcnt - which is changed by sock_hold()/sock_put()
- struct sock::sk_wmem_alloc - which accounts the memory allocated by
  the skbs in the send path.

If the socket is closed the struct sock::sk_refcnt will finally reach 0
and sk_free() is called. Which then calls
refcount_dec_and_test(&sk->sk_wmem_alloc). If sk_wmem_alloc reaches 0
the socket is actually free()ed.

In case there are still TX skbs on the fly and the socket() is closed,
the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack
clones an "echo" skb, calls sock_hold() on the original socket and
references it. This produces the following back trace:

| WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134
| refcount_t: addition on 0; use-after-free.
| Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E)
| CPU: 0 PID: 280 Comm: test_can.sh Tainted: G            E     5.11.0-04577-gf8ff6603c617 #203
| Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
| Backtrace:
| [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220
| [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8)
| [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90
| [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2
| [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540
| [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50)
| [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c)
| [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600
| [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00
| [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600
| [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400
| [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534)

To fix this problem, we have to take into account, that the socket
technically still there but should not used (by any new skbs) any more.
The function skb_clone_sk_optional() (introduced in the previous patch)
takes care of this. It will only clone the skb, if the sk is set and the
refcount has not reached 0.

Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Andre Naujoks <nautsch2@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 0ae89beb283a ("can: add destructor for self generated skbs")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 include/linux/can/skb.h   | 3 +--
 net/can/af_can.c          | 6 +++---
 net/can/j1939/main.c      | 3 +--
 net/can/j1939/socket.c    | 3 +--
 net/can/j1939/transport.c | 4 +---
 5 files changed, 7 insertions(+), 12 deletions(-)

diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h
index 685f34cfba20..bc1af38697a2 100644
--- a/include/linux/can/skb.h
+++ b/include/linux/can/skb.h
@@ -79,13 +79,12 @@ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb)
 {
 	struct sk_buff *nskb;
 
-	nskb = skb_clone(skb, GFP_ATOMIC);
+	nskb = skb_clone_sk_optional(skb);
 	if (unlikely(!nskb)) {
 		kfree_skb(skb);
 		return NULL;
 	}
 
-	can_skb_set_owner(nskb, skb->sk);
 	consume_skb(skb);
 	return nskb;
 }
diff --git a/net/can/af_can.c b/net/can/af_can.c
index cce2af10eb3e..9e1bd60e7e1b 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -251,20 +251,20 @@ int can_send(struct sk_buff *skb, int loop)
 		 * its own. Example: can_raw sockopt CAN_RAW_RECV_OWN_MSGS
 		 * Therefore we have to ensure that skb->sk remains the
 		 * reference to the originating sock by restoring skb->sk
-		 * after each skb_clone() or skb_orphan() usage.
+		 * after each skb_clone() or skb_orphan() usage -
+		 * skb_clone_sk_optional() takes care of that.
 		 */
 
 		if (!(skb->dev->flags & IFF_ECHO)) {
 			/* If the interface is not capable to do loopback
 			 * itself, we do it here.
 			 */
-			newskb = skb_clone(skb, GFP_ATOMIC);
+			newskb = skb_clone_sk_optional(skb);
 			if (!newskb) {
 				kfree_skb(skb);
 				return -ENOMEM;
 			}
 
-			can_skb_set_owner(newskb, skb->sk);
 			newskb->ip_summed = CHECKSUM_UNNECESSARY;
 			newskb->pkt_type = PACKET_BROADCAST;
 		}
diff --git a/net/can/j1939/main.c b/net/can/j1939/main.c
index da3a7a7bcff2..4f6852d48077 100644
--- a/net/can/j1939/main.c
+++ b/net/can/j1939/main.c
@@ -47,12 +47,11 @@ static void j1939_can_recv(struct sk_buff *iskb, void *data)
 	 * the header goes into sockaddr.
 	 * j1939 may not touch the incoming skb in such way
 	 */
-	skb = skb_clone(iskb, GFP_ATOMIC);
+	skb = skb_clone_sk_optional(iskb);
 	if (!skb)
 		return;
 
 	j1939_priv_get(priv);
-	can_skb_set_owner(skb, iskb->sk);
 
 	/* get a pointer to the header of the skb
 	 * the skb payload (pointer) is moved, so that the next skb_data
diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c
index 4e4a510d82f9..c1be6c26ff76 100644
--- a/net/can/j1939/socket.c
+++ b/net/can/j1939/socket.c
@@ -305,12 +305,11 @@ static void j1939_sk_recv_one(struct j1939_sock *jsk, struct sk_buff *oskb)
 	if (!j1939_sk_recv_match_one(jsk, oskcb))
 		return;
 
-	skb = skb_clone(oskb, GFP_ATOMIC);
+	skb = skb_clone_sk_optional(oskb);
 	if (!skb) {
 		pr_warn("skb clone failed\n");
 		return;
 	}
-	can_skb_set_owner(skb, oskb->sk);
 
 	skcb = j1939_skb_to_cb(skb);
 	skcb->msg_flags &= ~(MSG_DONTROUTE);
diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index e09d087ba240..e902557bbe17 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1014,12 +1014,10 @@ static int j1939_simple_txnext(struct j1939_session *session)
 	if (!se_skb)
 		return 0;
 
-	skb = skb_clone(se_skb, GFP_ATOMIC);
+	skb = skb_clone_sk_optional(se_skb);
 	if (!skb)
 		return -ENOMEM;
 
-	can_skb_set_owner(skb, se_skb->sk);
-
 	j1939_tp_set_rxtimeout(session, J1939_SIMPLE_ECHO_TIMEOUT_MS);
 
 	ret = j1939_send_one(priv, skb);
-- 
2.29.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned
  2021-02-23  5:53 ` [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned Oleksij Rempel
@ 2021-02-23  8:55   ` Eric Dumazet
  0 siblings, 0 replies; 4+ messages in thread
From: Eric Dumazet @ 2021-02-23  8:55 UTC (permalink / raw)
  To: Oleksij Rempel
  Cc: Marc Kleine-Budde, David S. Miller, Jakub Kicinski,
	Oliver Hartkopp, Robin van der Gracht, Johannes Berg,
	Andre Naujoks, kernel, linux-can, netdev, LKML, linux-wireless

On Tue, Feb 23, 2021 at 6:53 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote:
>
> There are two ref count variables controlling the free()ing of a socket:
> - struct sock::sk_refcnt - which is changed by sock_hold()/sock_put()
> - struct sock::sk_wmem_alloc - which accounts the memory allocated by
>   the skbs in the send path.
>
> If the socket is closed the struct sock::sk_refcnt will finally reach 0
> and sk_free() is called. Which then calls
> refcount_dec_and_test(&sk->sk_wmem_alloc). If sk_wmem_alloc reaches 0
> the socket is actually free()ed.
>
> In case there are still TX skbs on the fly and the socket() is closed,
> the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack
> clones an "echo" skb, calls sock_hold() on the original socket and
> references it. This produces the following back trace:

Why not simply fix can_skb_set_owner() instead of adding yet another helper ?

diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h
index 685f34cfba20741d372d340fe7df1084767b2850..655f33aa99e330b8ffc804b0f3a1d61aa9b00b0b
100644
--- a/include/linux/can/skb.h
+++ b/include/linux/can/skb.h
@@ -65,8 +65,7 @@ static inline void can_skb_reserve(struct sk_buff *skb)

 static inline void can_skb_set_owner(struct sk_buff *skb, struct sock *sk)
 {
-       if (sk) {
-               sock_hold(sk);
+       if (sk && refcount_inc_not_zero(&sk->sk_refcnt)) {
                skb->destructor = sock_efree;
                skb->sk = sk;
        }

IMO, CAN seems to use sock_hold() even for tx packets.

But tx packets usually have a reference on sockets based on sk->sk_wmem_alloc ,
look at skb_set_owner_w() for reference.

This might be the reason why you catch a zero sk_refcnt while packets
are still in flight ?



> | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134
> | refcount_t: addition on 0; use-after-free.
> | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E)
> | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G            E     5.11.0-04577-gf8ff6603c617 #203
> | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> | Backtrace:
> | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220
> | [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8)
> | [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90
> | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2
> | [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540
> | [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50)
> | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c)
> | [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600
> | [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00
> | [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600
> | [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400
> | [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534)
>
> To fix this problem, we have to take into account, that the socket
> technically still there but should not used (by any new skbs) any more.
> The function skb_clone_sk_optional() (introduced in the previous patch)
> takes care of this. It will only clone the skb, if the sk is set and the
> refcount has not reached 0.
>
> Cc: Oliver Hartkopp <socketcan@hartkopp.net>
> Cc: Andre Naujoks <nautsch2@gmail.com>
> Cc: Eric Dumazet <edumazet@google.com>
> Fixes: 0ae89beb283a ("can: add destructor for self generated skbs")
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  include/linux/can/skb.h   | 3 +--
>  net/can/af_can.c          | 6 +++---
>  net/can/j1939/main.c      | 3 +--
>  net/can/j1939/socket.c    | 3 +--
>  net/can/j1939/transport.c | 4 +---
>  5 files changed, 7 insertions(+), 12 deletions(-)
>
> diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h
> index 685f34cfba20..bc1af38697a2 100644
> --- a/include/linux/can/skb.h
> +++ b/include/linux/can/skb.h
> @@ -79,13 +79,12 @@ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb)
>  {
>         struct sk_buff *nskb;
>
> -       nskb = skb_clone(skb, GFP_ATOMIC);
> +       nskb = skb_clone_sk_optional(skb);
>         if (unlikely(!nskb)) {
>                 kfree_skb(skb);
>                 return NULL;
>         }
>
> -       can_skb_set_owner(nskb, skb->sk);
>         consume_skb(skb);
>         return nskb;
>  }
> diff --git a/net/can/af_can.c b/net/can/af_can.c
> index cce2af10eb3e..9e1bd60e7e1b 100644
> --- a/net/can/af_can.c
> +++ b/net/can/af_can.c
> @@ -251,20 +251,20 @@ int can_send(struct sk_buff *skb, int loop)
>                  * its own. Example: can_raw sockopt CAN_RAW_RECV_OWN_MSGS
>                  * Therefore we have to ensure that skb->sk remains the
>                  * reference to the originating sock by restoring skb->sk
> -                * after each skb_clone() or skb_orphan() usage.
> +                * after each skb_clone() or skb_orphan() usage -
> +                * skb_clone_sk_optional() takes care of that.
>                  */
>
>                 if (!(skb->dev->flags & IFF_ECHO)) {
>                         /* If the interface is not capable to do loopback
>                          * itself, we do it here.
>                          */
> -                       newskb = skb_clone(skb, GFP_ATOMIC);
> +                       newskb = skb_clone_sk_optional(skb);
>                         if (!newskb) {
>                                 kfree_skb(skb);
>                                 return -ENOMEM;
>                         }
>
> -                       can_skb_set_owner(newskb, skb->sk);
>                         newskb->ip_summed = CHECKSUM_UNNECESSARY;
>                         newskb->pkt_type = PACKET_BROADCAST;
>                 }
> diff --git a/net/can/j1939/main.c b/net/can/j1939/main.c
> index da3a7a7bcff2..4f6852d48077 100644
> --- a/net/can/j1939/main.c
> +++ b/net/can/j1939/main.c
> @@ -47,12 +47,11 @@ static void j1939_can_recv(struct sk_buff *iskb, void *data)
>          * the header goes into sockaddr.
>          * j1939 may not touch the incoming skb in such way
>          */
> -       skb = skb_clone(iskb, GFP_ATOMIC);
> +       skb = skb_clone_sk_optional(iskb);
>         if (!skb)
>                 return;
>
>         j1939_priv_get(priv);
> -       can_skb_set_owner(skb, iskb->sk);
>
>         /* get a pointer to the header of the skb
>          * the skb payload (pointer) is moved, so that the next skb_data
> diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c
> index 4e4a510d82f9..c1be6c26ff76 100644
> --- a/net/can/j1939/socket.c
> +++ b/net/can/j1939/socket.c
> @@ -305,12 +305,11 @@ static void j1939_sk_recv_one(struct j1939_sock *jsk, struct sk_buff *oskb)
>         if (!j1939_sk_recv_match_one(jsk, oskcb))
>                 return;
>
> -       skb = skb_clone(oskb, GFP_ATOMIC);
> +       skb = skb_clone_sk_optional(oskb);
>         if (!skb) {
>                 pr_warn("skb clone failed\n");
>                 return;
>         }
> -       can_skb_set_owner(skb, oskb->sk);
>
>         skcb = j1939_skb_to_cb(skb);
>         skcb->msg_flags &= ~(MSG_DONTROUTE);
> diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
> index e09d087ba240..e902557bbe17 100644
> --- a/net/can/j1939/transport.c
> +++ b/net/can/j1939/transport.c
> @@ -1014,12 +1014,10 @@ static int j1939_simple_txnext(struct j1939_session *session)
>         if (!se_skb)
>                 return 0;
>
> -       skb = skb_clone(se_skb, GFP_ATOMIC);
> +       skb = skb_clone_sk_optional(se_skb);
>         if (!skb)
>                 return -ENOMEM;
>
> -       can_skb_set_owner(skb, se_skb->sk);
> -
>         j1939_tp_set_rxtimeout(session, J1939_SIMPLE_ECHO_TIMEOUT_MS);
>
>         ret = j1939_send_one(priv, skb);
> --
> 2.29.2
>

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-23  5:53 [PATCH net v2 0/2] add support for skb with sk ref cloning Oleksij Rempel
2021-02-23  5:53 ` [PATCH net v2 1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid Oleksij Rempel
2021-02-23  5:53 ` [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned Oleksij Rempel
2021-02-23  8:55   ` Eric Dumazet

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git