From: Andrii Nakryiko <andrii@kernel.org>
To: <bpf@vger.kernel.org>, <netdev@vger.kernel.org>, <ast@fb.com>,
<daniel@iogearbox.net>
Cc: <andrii@kernel.org>, <kernel-team@fb.com>
Subject: [PATCH bpf-next 13/17] selftests/bpf: use -O0 instead of -Og in selftests builds
Date: Wed, 14 Apr 2021 13:01:42 -0700 [thread overview]
Message-ID: <20210414200146.2663044-14-andrii@kernel.org> (raw)
In-Reply-To: <20210414200146.2663044-1-andrii@kernel.org>
While -Og is designed to work well with debugger, it's still inferior to -O0
in terms of debuggability experience. It will cause some variables to still be
inlined, it will also prevent single-stepping some statements and otherwise
interfere with debugging experience. So switch to -O0 which turns off any
optimization and provides the best debugging experience.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
---
tools/testing/selftests/bpf/Makefile | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 6448c626498f..22a88580b491 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -21,7 +21,7 @@ endif
BPF_GCC ?= $(shell command -v bpf-gcc;)
SAN_CFLAGS ?=
-CFLAGS += -g -Og -rdynamic -Wall $(GENFLAGS) $(SAN_CFLAGS) \
+CFLAGS += -g -O0 -rdynamic -Wall $(GENFLAGS) $(SAN_CFLAGS) \
-I$(CURDIR) -I$(INCLUDE_DIR) -I$(GENDIR) -I$(LIBDIR) \
-I$(TOOLSINCDIR) -I$(APIDIR) -I$(OUTPUT) \
-Dbpf_prog_load=bpf_prog_test_load \
@@ -201,7 +201,7 @@ $(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \
$(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/bpftool
$(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \
CC=$(HOSTCC) LD=$(HOSTLD) \
- EXTRA_CFLAGS='-g -Og' \
+ EXTRA_CFLAGS='-g -O0' \
OUTPUT=$(HOST_BUILD_DIR)/bpftool/ \
prefix= DESTDIR=$(HOST_SCRATCH_DIR)/ install
@@ -219,7 +219,7 @@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
../../../include/uapi/linux/bpf.h \
| $(INCLUDE_DIR) $(BUILD_DIR)/libbpf
$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \
- EXTRA_CFLAGS='-g -Og' \
+ EXTRA_CFLAGS='-g -O0' \
DESTDIR=$(SCRATCH_DIR) prefix= all install_headers
ifneq ($(BPFOBJ),$(HOST_BPFOBJ))
@@ -227,7 +227,7 @@ $(HOST_BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
../../../include/uapi/linux/bpf.h \
| $(INCLUDE_DIR) $(HOST_BUILD_DIR)/libbpf
$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \
- EXTRA_CFLAGS='-g -Og' \
+ EXTRA_CFLAGS='-g -O0' \
OUTPUT=$(HOST_BUILD_DIR)/libbpf/ CC=$(HOSTCC) LD=$(HOSTLD) \
DESTDIR=$(HOST_SCRATCH_DIR)/ prefix= all install_headers
endif
--
2.30.2
next prev parent reply other threads:[~2021-04-14 20:02 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-14 20:01 [PATCH bpf-next 00/17] BPF static linker: support externs Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 01/17] bpftool: support dumping BTF VAR's "extern" linkage Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 02/17] bpftool: dump more info about DATASEC members Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 03/17] libbpf: suppress compiler warning when using SEC() macro with externs Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 04/17] libbpf: mark BPF subprogs with hidden visibility as static for BPF verifier Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 05/17] libbpf: allow gaps in BPF program sections to support overriden weak functions Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 06/17] libbpf: refactor BTF map definition parsing Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 07/17] libbpf: factor out symtab and relos sanity checks Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 08/17] libbpf: make few internal helpers available outside of libbpf.c Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 09/17] libbpf: extend sanity checking ELF symbols with externs validation Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 10/17] libbpf: tighten BTF type ID rewriting with error checking Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 11/17] libbpf: add linker extern resolution support for functions and global variables Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 12/17] libbpf: support extern resolution for BTF-defined maps in .maps section Andrii Nakryiko
2021-04-14 22:00 ` Alexei Starovoitov
2021-04-14 23:48 ` Andrii Nakryiko
2021-04-15 2:01 ` Alexei Starovoitov
2021-04-15 20:35 ` Andrii Nakryiko
2021-04-15 20:57 ` Alexei Starovoitov
2021-04-14 20:01 ` Andrii Nakryiko [this message]
2021-04-14 22:02 ` [PATCH bpf-next 13/17] selftests/bpf: use -O0 instead of -Og in selftests builds Alexei Starovoitov
2021-04-14 22:15 ` David Laight
2021-04-15 0:03 ` Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 14/17] selftests/bpf: omit skeleton generation for multi-linked BPF object files Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 15/17] selftests/bpf: add function linking selftest Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 16/17] selftests/bpf: add global variables " Andrii Nakryiko
2021-04-14 20:01 ` [PATCH bpf-next 17/17] sleftests/bpf: add map " Andrii Nakryiko
2021-04-15 0:21 ` [PATCH bpf-next 00/17] BPF static linker: support externs Andrii Nakryiko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210414200146.2663044-14-andrii@kernel.org \
--to=andrii@kernel.org \
--cc=ast@fb.com \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=kernel-team@fb.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).