netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ansuel Smith <ansuelsmth@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [RFC PATCH net-next v3 08/20] net: dsa: qca8k: add support for qca8327 switch
Date: Wed,  5 May 2021 00:29:02 +0200	[thread overview]
Message-ID: <20210504222915.17206-8-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20210504222915.17206-1-ansuelsmth@gmail.com>

qca8327 switch is a low tier version of the more recent qca8337.
It does share the same regs used by the qca8k driver and can be
supported with minimal change.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 23 ++++++++++++++++++++---
 drivers/net/dsa/qca8k.h |  6 ++++++
 2 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 33875ad58d59..17c6fd4afa7d 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1529,6 +1529,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
 static int
 qca8k_sw_probe(struct mdio_device *mdiodev)
 {
+	const struct qca8k_match_data *data;
 	struct qca8k_priv *priv;
 	u32 id;
 
@@ -1556,6 +1557,11 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 		gpiod_set_value_cansleep(priv->reset_gpio, 0);
 	}
 
+	/* get the switches ID from the compatible */
+	data = of_device_get_match_data(&mdiodev->dev);
+	if (!data)
+		return -ENODEV;
+
 	/* read the switches ID register */
 	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
 	if (id < 0)
@@ -1563,8 +1569,10 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 
 	id >>= QCA8K_MASK_CTRL_ID_S;
 	id &= QCA8K_MASK_CTRL_ID_M;
-	if (id != QCA8K_ID_QCA8337)
+	if (id != data->id) {
+		dev_err(&mdiodev->dev, "Switch id detected %x but expected %x", id, data->id);
 		return -ENODEV;
+	}
 
 	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
 	if (!priv->ds)
@@ -1629,9 +1637,18 @@ static int qca8k_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
 			 qca8k_suspend, qca8k_resume);
 
+static const struct qca8k_match_data qca832x = {
+	.id = QCA8K_ID_QCA8327,
+};
+
+static const struct qca8k_match_data qca833x = {
+	.id = QCA8K_ID_QCA8337,
+};
+
 static const struct of_device_id qca8k_of_match[] = {
-	{ .compatible = "qca,qca8334" },
-	{ .compatible = "qca,qca8337" },
+	{ .compatible = "qca,qca8327", .data = &qca832x },
+	{ .compatible = "qca,qca8334", .data = &qca833x },
+	{ .compatible = "qca,qca8337", .data = &qca833x },
 	{ /* sentinel */ },
 };
 
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 7ca4b93e0bb5..86e8d479c9f9 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -15,6 +15,8 @@
 #define QCA8K_NUM_PORTS					7
 #define QCA8K_MAX_MTU					9000
 
+#define PHY_ID_QCA8327					0x004dd034
+#define QCA8K_ID_QCA8327				0x12
 #define PHY_ID_QCA8337					0x004dd036
 #define QCA8K_ID_QCA8337				0x13
 
@@ -211,6 +213,10 @@ struct ar8xxx_port_status {
 	int enabled;
 };
 
+struct qca8k_match_data {
+	u8 id;
+};
+
 struct qca8k_priv {
 	struct regmap *regmap;
 	struct mii_bus *bus;
-- 
2.30.2


  parent reply	other threads:[~2021-05-04 22:29 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-04 22:28 [RFC PATCH net-next v3 01/20] net: mdio: ipq8064: clean whitespaces in define Ansuel Smith
2021-05-04 22:28 ` [RFC PATCH net-next v3 02/20] net: mdio: ipq8064: add regmap config to disable REGCACHE Ansuel Smith
2021-05-04 22:28 ` [RFC PATCH net-next v3 03/20] net: mdio: ipq8064: enlarge sleep after read/write operation Ansuel Smith
2021-05-04 22:28 ` [RFC PATCH net-next v3 04/20] net: dsa: qca8k: handle qca8k_set_page errors Ansuel Smith
2021-05-05  0:25   ` Andrew Lunn
2021-05-05  0:26     ` Andrew Lunn
2021-05-04 22:28 ` [RFC PATCH net-next v3 05/20] net: dsa: qca8k: handle error with qca8k_read operation Ansuel Smith
2021-05-05  0:36   ` Andrew Lunn
2021-05-05  0:44     ` Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 06/20] net: dsa: qca8k: handle error with qca8k_write operation Ansuel Smith
2021-05-05  0:41   ` Andrew Lunn
2021-05-05  0:47     ` Ansuel Smith
2021-05-06 11:19       ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 07/20] net: dsa: qca8k: handle error with qca8k_rmw operation Ansuel Smith
2021-05-05  0:46   ` Andrew Lunn
2021-05-05  0:51     ` Ansuel Smith
2021-05-04 22:29 ` Ansuel Smith [this message]
2021-05-05  0:48   ` [RFC PATCH net-next v3 08/20] net: dsa: qca8k: add support for qca8327 switch Andrew Lunn
2021-05-06 11:20   ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 09/20] devicetree: net: dsa: qca8k: Document new compatible qca8327 Ansuel Smith
2021-05-05  0:48   ` Andrew Lunn
2021-05-06 21:07   ` Rob Herring
2021-05-04 22:29 ` [RFC PATCH net-next v3 10/20] net: dsa: qca8k: add priority tweak to qca8337 switch Ansuel Smith
2021-05-05  0:53   ` Andrew Lunn
2021-05-06 11:16   ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 11/20] net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327 Ansuel Smith
2021-05-05  0:54   ` Andrew Lunn
2021-05-04 22:29 ` [RFC PATCH net-next v3 12/20] net: dsa: qca8k: add support for switch rev Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 13/20] net: dsa: qca8k: make rgmii delay configurable Ansuel Smith
2021-05-05  1:00   ` Andrew Lunn
2021-05-05  1:07     ` Ansuel Smith
2021-05-06 11:10   ` Vladimir Oltean
2021-05-06 21:53     ` Ansuel Smith
2021-05-07  8:51       ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 14/20] net: dsa: qca8k: clear MASTER_EN after phy read/write Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 15/20] net: dsa: qca8k: dsa: qca8k: protect MASTER busy_wait with mdio mutex Ansuel Smith
2021-05-05  1:04   ` Andrew Lunn
2021-05-04 22:29 ` [RFC PATCH net-next v3 16/20] net: dsa: qca8k: enlarge mdio delay and timeout Ansuel Smith
2021-05-06 11:27   ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 17/20] net: phy: phylink: permit to pass dev_flags to phylink_connect_phy Ansuel Smith
2021-05-04 22:33   ` Florian Fainelli
2021-05-05  0:35     ` Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 18/20] net: dsa: slave: pass dev_flags also to internal PHY Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 19/20] net: dsa: qca8k: pass switch_revision info to phy dev_flags Ansuel Smith
2021-05-06 11:24   ` Vladimir Oltean
2021-05-07 23:26     ` Ansuel Smith
2021-05-07 23:33       ` Russell King - ARM Linux admin
2021-05-07 23:51         ` Ansuel Smith
2021-05-08 17:31           ` Andrew Lunn
2021-05-08 18:26         ` Vladimir Oltean
2021-05-08 19:39           ` Russell King - ARM Linux admin
2021-05-08 20:55             ` Andrew Lunn
2021-05-07  9:44   ` Russell King - ARM Linux admin
2021-05-04 22:29 ` [RFC PATCH net-next v3 20/20] net: phy: add qca8k driver for qca8k switch internal PHY Ansuel Smith
2021-05-05  1:11   ` Andrew Lunn
2021-05-05  1:17     ` Ansuel Smith
2021-05-05 12:06       ` Andrew Lunn
2021-05-04 22:29 ` [RFC PATCH next-next v3 00/20] Multiple improvement to qca8k stability Ansuel Smith
2021-05-05  0:17 ` [RFC PATCH net-next v3 01/20] net: mdio: ipq8064: clean whitespaces in define Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210504222915.17206-8-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).