[PATCH AUTOSEL 4.4 05/35] netlink: Deal with ESRCH error in nlmsg_notify()

[PATCH AUTOSEL 4.4 05/35] netlink: Deal with ESRCH error in nlmsg_notify()

[Sasha Levin]

From: Yajun Deng <yajun.deng@linux.dev>

[ Upstream commit fef773fc8110d8124c73a5e6610f89e52814637d ]

Yonghong Song report:
The bpf selftest tc_bpf failed with latest bpf-next.
The following is the command to run and the result:
$ ./test_progs -n 132
[   40.947571] bpf_testmod: loading out-of-tree module taints kernel.
test_tc_bpf:PASS:test_tc_bpf__open_and_load 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create(BPF_TC_INGRESS) 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create invalid hook.attach_point 0 nsec
test_tc_bpf_basic:PASS:bpf_obj_get_info_by_fd 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach replace mode 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_query 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
libbpf: Kernel error message: Failed to send filter delete notification
test_tc_bpf_basic:FAIL:bpf_tc_detach unexpected error: -3 (errno 3)
test_tc_bpf:FAIL:test_tc_internal ingress unexpected error: -3 (errno 3)

The failure seems due to the commit
    cfdf0d9ae75b ("rtnetlink: use nlmsg_notify() in rtnetlink_send()")

Deal with ESRCH error in nlmsg_notify() even the report variable is zero.

Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210719051816.11762-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlink/af_netlink.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index c20c41801845..260cba93a2cf 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -2405,13 +2405,15 @@ int nlmsg_notify(struct sock *sk, struct sk_buff *skb, u32 portid,
 		/* errors reported via destination sk->sk_err, but propagate
 		 * delivery errors if NETLINK_BROADCAST_ERROR flag is set */
 		err = nlmsg_multicast(sk, skb, exclude_portid, group, flags);
+		if (err == -ESRCH)
+			err = 0;
 	}
 
 	if (report) {
 		int err2;
 
 		err2 = nlmsg_unicast(sk, skb, portid);
-		if (!err || err == -ESRCH)
+		if (!err)
 			err = err2;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 10/35] bpf/tests: Fix copy-and-paste error in double word test

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit ae7f47041d928b1a2f28717d095b4153c63cbf6a ]

This test now operates on DW as stated instead of W, which was
already covered by another test.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721104058.3755254-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_bpf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index b1495f586f29..7db8d06006d8 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -3983,8 +3983,8 @@ static struct bpf_test tests[] = {
 		.u.insns_int = {
 			BPF_LD_IMM64(R0, 0),
 			BPF_LD_IMM64(R1, 0xffffffffffffffffLL),
-			BPF_STX_MEM(BPF_W, R10, R1, -40),
-			BPF_LDX_MEM(BPF_W, R0, R10, -40),
+			BPF_STX_MEM(BPF_DW, R10, R1, -40),
+			BPF_LDX_MEM(BPF_DW, R0, R10, -40),
 			BPF_EXIT_INSN(),
 		},
 		INTERNAL,
-- 
2.30.2

[PATCH AUTOSEL 4.4 11/35] bpf/tests: Do not PASS tests without actually testing the result

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit 2b7e9f25e590726cca76700ebdb10e92a7a72ca1 ]

Each test case can have a set of sub-tests, where each sub-test can
run the cBPF/eBPF test snippet with its own data_size and expected
result. Before, the end of the sub-test array was indicated by both
data_size and result being zero. However, most or all of the internal
eBPF tests has a data_size of zero already. When such a test also had
an expected value of zero, the test was never run but reported as
PASS anyway.

Now the test runner always runs the first sub-test, regardless of the
data_size and result values. The sub-test array zero-termination only
applies for any additional sub-tests.

There are other ways fix it of course, but this solution at least
removes the surprise of eBPF tests with a zero result always succeeding.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721103822.3755111-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_bpf.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 7db8d06006d8..cf2880d2ce3f 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -5399,7 +5399,14 @@ static int run_one(const struct bpf_prog *fp, struct bpf_test *test)
 		u64 duration;
 		u32 ret;
 
-		if (test->test[i].data_size == 0 &&
+		/*
+		 * NOTE: Several sub-tests may be present, in which case
+		 * a zero {data_size, result} tuple indicates the end of
+		 * the sub-test array. The first test is always run,
+		 * even if both data_size and result happen to be zero.
+		 */
+		if (i > 0 &&
+		    test->test[i].data_size == 0 &&
 		    test->test[i].result == 0)
 			break;
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 15/35] ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit 6321c7acb82872ef6576c520b0e178eaad3a25c0 ]

Fix the following out-of-bounds warning:

    In function 'ip_copy_addrs',
        inlined from '__ip_queue_xmit' at net/ipv4/ip_output.c:517:2:
net/ipv4/ip_output.c:449:2: warning: 'memcpy' offset [40, 43] from the object at 'fl' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 36 [-Warray-bounds]
      449 |  memcpy(&iph->saddr, &fl4->saddr,
          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      450 |         sizeof(fl4->saddr) + sizeof(fl4->daddr));
          |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &iph->saddr and &fl4->saddr. As these are just
a couple of struct members, fix this by using direct assignments,
instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_output.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index e808227c58d6..477540b3d320 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -376,8 +376,9 @@ static void ip_copy_addrs(struct iphdr *iph, const struct flowi4 *fl4)
 {
 	BUILD_BUG_ON(offsetof(typeof(*fl4), daddr) !=
 		     offsetof(typeof(*fl4), saddr) + sizeof(fl4->saddr));
-	memcpy(&iph->saddr, &fl4->saddr,
-	       sizeof(fl4->saddr) + sizeof(fl4->daddr));
+
+	iph->saddr = fl4->saddr;
+	iph->daddr = fl4->daddr;
 }
 
 /* Note: skb->sk can be different from sk, in case of tunnels */
-- 
2.30.2

[PATCH AUTOSEL 4.4 21/35] Bluetooth: skip invalid hci_sync_conn_complete_evt

[Sasha Levin]

From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>

[ Upstream commit 92fe24a7db751b80925214ede43f8d2be792ea7b ]

Syzbot reported a corrupted list in kobject_add_internal [1]. This
happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with
status 0 are sent for the same HCI connection. This causes us to
register the device more than once which corrupts the kset list.

As this is forbidden behavior, we add a check for whether we're
trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple
times for one connection. If that's the case, the event is invalid, so
we report an error that the device is misbehaving, and ignore the
packet.

Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c [1]
Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 7ed3c7df271a..6528ecc3a3bc 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3747,6 +3747,21 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
 
 	switch (ev->status) {
 	case 0x00:
+		/* The synchronous connection complete event should only be
+		 * sent once per new connection. Receiving a successful
+		 * complete event when the connection status is already
+		 * BT_CONNECTED means that the device is misbehaving and sent
+		 * multiple complete event packets for the same new connection.
+		 *
+		 * Registering the device more than once can corrupt kernel
+		 * memory, hence upon detecting this invalid event, we report
+		 * an error and ignore the packet.
+		 */
+		if (conn->state == BT_CONNECTED) {
+			bt_dev_err(hdev, "Ignoring connect complete event for existing connection");
+			goto unlock;
+		}
+
 		conn->handle = __le16_to_cpu(ev->handle);
 		conn->state  = BT_CONNECTED;
 		conn->type   = ev->link_type;
-- 
2.30.2

[PATCH AUTOSEL 4.4 25/35] rpc: fix gss_svc_init cleanup on failure

[Sasha Levin]

From: "J. Bruce Fields" <bfields@redhat.com>

[ Upstream commit 5a4753446253a427c0ff1e433b9c4933e5af207c ]

The failure case here should be rare, but it's obviously wrong.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/svcauth_gss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index bb8b0ef5de82..daf0c1ea3917 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1845,7 +1845,7 @@ gss_svc_init_net(struct net *net)
 		goto out2;
 	return 0;
 out2:
-	destroy_use_gss_proxy_proc_entry(net);
+	rsi_cache_destroy_net(net);
 out1:
 	rsc_cache_destroy_net(net);
 	return rv;
-- 
2.30.2

[PATCH AUTOSEL 4.4 34/35] ath9k: fix OOB read ar9300_eeprom_restore_internal

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ]

Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.

There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.

I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index c876dc2437b0..96e1f54cccaf 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3345,7 +3345,8 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
 			"Found block at %x: code=%d ref=%d length=%d major=%d minor=%d\n",
 			cptr, code, reference, length, major, minor);
 		if ((!AR_SREV_9485(ah) && length >= 1024) ||
-		    (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485)) {
+		    (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485) ||
+		    (length > cptr)) {
 			ath_dbg(common, EEPROM, "Skipping bad header\n");
 			cptr -= COMP_HDR_LEN;
 			continue;
-- 
2.30.2

[PATCH AUTOSEL 4.4 35/35] net: fix NULL pointer reference in cipso_v4_doi_free

[Sasha Levin]

From: 王贇 <yun.wang@linux.alibaba.com>

[ Upstream commit 733c99ee8be9a1410287cdbb943887365e83b2d6 ]

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlabel/netlabel_cipso_v4.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index 7fd1104ba900..d17a8f3d3387 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -163,8 +163,8 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
 		return -ENOMEM;
 	doi_def->map.std = kzalloc(sizeof(*doi_def->map.std), GFP_KERNEL);
 	if (doi_def->map.std == NULL) {
-		ret_val = -ENOMEM;
-		goto add_std_failure;
+		kfree(doi_def);
+		return -ENOMEM;
 	}
 	doi_def->type = CIPSO_V4_MAP_TRANS;
 
-- 
2.30.2