[PATCH 0/4] dt-bindings: imx: add nvmem property

* [PATCH 0/4] dt-bindings: imx: add nvmem property
@ 2022-03-24  4:20 Peng Fan (OSS)
  2022-03-24  4:20 ` [PATCH 1/4] dt-bindings: can: fsl,flexcan: introduce " Peng Fan (OSS)
                   ` (4 more replies)
  0 siblings, 5 replies; 13+ messages in thread
From: Peng Fan (OSS) @ 2022-03-24  4:20 UTC (permalink / raw)
  To: ulf.hansson, robh+dt, krzk+dt, shawnguo, s.hauer, wg, mkl, davem,
	kuba, pabeni, qiangqing.zhang
  Cc: kernel, festevam, linux-imx, linux-mmc, devicetree,
	linux-arm-kernel, linux-kernel, linux-can, netdev, Peng Fan

From: Peng Fan <peng.fan@nxp.com>

To i.MX SoC, there are many variants, such as i.MX8M Plus which
feature 4 A53, GPU, VPU, SDHC, FLEXCAN, FEC, eQOS and etc.
But i.MX8M Plus has many parts, one part may not have FLEXCAN,
the other part may not have eQOS or GPU.
But we use one device tree to support i.MX8MP including its parts,
then we need update device tree to mark the disabled IP status "disabled".

In NXP U-Boot, we hardcoded node path and runtime update device tree
status in U-Boot according to fuse value. But this method is not
scalable and need encoding all the node paths that needs check.

By introducing nvmem property for each node that needs runtime update
status property accoridng fuse value, we could use one Bootloader
code piece to support all i.MX SoCs.

The drawback is we need nvmem property for all the nodes which maybe
fused out.

Rob:
  I only include limited node bindings in this patchset, and not
  include device tree patch. Just wanna to see whether you
  agree this approach. If you agree, I'll later post device tree
  part and other dt-bindings update, such as MU, USB and etc.

  Thanks.

Example as below:

			flexcan1: can@308c0000 {
				....
				nvmem-cells = <&flexcan_disabled>;
				nvmem-cell-names = "disabled";
			};

			flexcan2: can@308d0000 {
				....
				nvmem-cells = <&flexcan_disabled>;
				nvmem-cell-names = "disabled";
			};

			ocotp: efuse@30350000 {
				compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
				reg = <0x30350000 0x10000>;
				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
				/* For nvmem subnodes */
				#address-cells = <1>;
				#size-cells = <1>;

				m7_disabled: m7@10 {
					reg = <0x10 4>;
					bits = <21 1>;
				};

				g1_disabled: g1@10 {
					reg = <0x10 4>;
					bits = <24 1>;
				};

				g2_disabled: g2@10 {
					reg = <0x10 4>;
					bits = <25 1>;
				};

				can_disabled: can@10 {
					reg = <0x10 4>;
					bits = <28 1>;
				};

				canfd_disabled: canfd@10 {
					reg = <0x10 4>;
					bits = <29 1>;
				};

				vc8000e_disabled: vc8000e@10 {
					reg = <0x10 4>;
					bits = <30 1>;
				};

				isp1_disabled: isp1@10 {
					reg = <0x14 4>;
					bits = <0 1>;
				};

				isp2_disabled: isp2@10 {
					reg = <0x14 4>;
					bits = <1 1>;
				};

				dewrap_disabled: dewrap@10 {
					reg = <0x14 4>;
					bits = <2 1>;
				};

				npu_disabled: dewrap@10 {
					reg = <0x14 4>;
					bits = <3 1>;
				};

				dsp_disabled: dewrap@10 {
					reg = <0x14 4>;
					bits = <4 1>;
				};

				asrc_disabled: dewrap@10 {
					reg = <0x14 4>;
					bits = <5 1>;
				};

				gpu2d_disabled: gpu2d@10 {
					reg = <0x14 4>;
					bits = <6 1>;
				};

				gpu3d_disabled: gpu3d@10 {
					reg = <0x14 4>;
					bits = <7 1>;
				};

				usb1_disabled: usb1@10 {
					reg = <0x14 4>;
					bits = <8 1>;
				};

				usb2_disabled: usb2@10 {
					reg = <0x14 4>;
					bits = <9 1>;
				};

				pcie1_disabled: pcie1@10 {
					reg = <0x14 4>;
					bits = <11 1>;
				};

				enet1_disabled: enet1@10 {
					reg = <0x14 4>;
					bits = <13 1>;
				};

				enet2_disabled: enet2@10 {
					reg = <0x14 4>;
					bits = <14 1>;
				};

				csi1_disabled: csi1@10 {
					reg = <0x14 4>;
					bits = <15 1>;
				};

				csi2_disabled: csi1@10 {
					reg = <0x14 4>;
					bits = <16 1>;
				};

				dsi1_disabled: dsi1@10 {
					reg = <0x14 4>;
					bits = <17 1>;
				};

				lvds1_disabled: lvds1@10 {
					reg = <0x14 4>;
					bits = <19 1>;
				};

				lvds2_disabled: lvds1@10 {
					reg = <0x14 4>;
					bits = <19 1>;
				};

				eth_mac1: mac-address@90 {
					reg = <0x90 6>;
				};

				eth_mac2: mac-address@96 {
					reg = <0x96 6>;
				};

			};

Peng Fan (4):
  dt-bindings: can: fsl,flexcan: introduce nvmem property
  dt-bindings: net: fsl,fec: introduce nvmem property
  dt-bindings: mmc: imx-esdhc: introduce nvmem property
  dt-bindings: net: imx-dwmac: introduce nvmem property

 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 9 +++++++++
 .../devicetree/bindings/net/can/fsl,flexcan.yaml         | 9 +++++++++
 Documentation/devicetree/bindings/net/fsl,fec.yaml       | 9 +++++++++
 Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml | 9 +++++++++
 4 files changed, 36 insertions(+)

-- 
2.35.1

^ permalink raw reply	[flat|nested] 13+ messages in thread