[PATCH AUTOSEL 5.4 02/55] mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue

[PATCH AUTOSEL 5.4 02/55] mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue

[Sasha Levin]

From: Niels Dossche <dossche.niels@gmail.com>

[ Upstream commit 3e12968f6d12a34b540c39cbd696a760cc4616f0 ]

cfg80211_ch_switch_notify uses ASSERT_WDEV_LOCK to assert that
net_device->ieee80211_ptr->mtx (which is the same as priv->wdev.mtx)
is held during the function's execution.
mwifiex_dfs_chan_sw_work_queue is one of its callers, which does not
hold that lock, therefore violating the assertion.
Add a lock around the call.

Disclaimer:
I am currently working on a static analyser to detect missing locks.
This was a reported case. I manually verified the report by looking
at the code, so that I do not send wrong information or patches.
After concluding that this seems to be a true positive, I created
this patch.
However, as I do not in fact have this particular hardware,
I was unable to test it.

Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220321225515.32113-1-dossche.niels@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/11h.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/11h.c b/drivers/net/wireless/marvell/mwifiex/11h.c
index 238accfe4f41..c4176e357b22 100644
--- a/drivers/net/wireless/marvell/mwifiex/11h.c
+++ b/drivers/net/wireless/marvell/mwifiex/11h.c
@@ -303,5 +303,7 @@ void mwifiex_dfs_chan_sw_work_queue(struct work_struct *work)
 
 	mwifiex_dbg(priv->adapter, MSG,
 		    "indicating channel switch completion to kernel\n");
+	mutex_lock(&priv->wdev.mtx);
 	cfg80211_ch_switch_notify(priv->netdev, &priv->dfs_chandef);
+	mutex_unlock(&priv->wdev.mtx);
 }
-- 
2.35.1

[PATCH AUTOSEL 5.4 03/55] b43legacy: Fix assigning negative value to unsigned variable

[Sasha Levin]

From: Haowen Bai <baihaowen@meizu.com>

[ Upstream commit 3f6b867559b3d43a7ce1b4799b755e812fc0d503 ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43legacy/phy.c:1181 b43legacy_phy_lo_b_measure()
warn: assigning (-772) to unsigned variable 'fval'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648203433-8736-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43legacy/phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43legacy/phy.c b/drivers/net/wireless/broadcom/b43legacy/phy.c
index a659259bc51a..6e76055e136d 100644
--- a/drivers/net/wireless/broadcom/b43legacy/phy.c
+++ b/drivers/net/wireless/broadcom/b43legacy/phy.c
@@ -1123,7 +1123,7 @@ void b43legacy_phy_lo_b_measure(struct b43legacy_wldev *dev)
 	struct b43legacy_phy *phy = &dev->phy;
 	u16 regstack[12] = { 0 };
 	u16 mls;
-	u16 fval;
+	s16 fval;
 	int i;
 	int j;
 
-- 
2.35.1

[PATCH AUTOSEL 5.4 04/55] b43: Fix assigning negative value to unsigned variable

[Sasha Levin]

From: Haowen Bai <baihaowen@meizu.com>

[ Upstream commit 11800d893b38e0e12d636c170c1abc19c43c730c ]

fix warning reported by smatch:
drivers/net/wireless/broadcom/b43/phy_n.c:585 b43_nphy_adjust_lna_gain_table()
warn: assigning (-2) to unsigned variable '*(lna_gain[0])'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648203315-28093-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/b43/phy_n.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
index 32ce1b42ce08..0ef62ef77af6 100644
--- a/drivers/net/wireless/broadcom/b43/phy_n.c
+++ b/drivers/net/wireless/broadcom/b43/phy_n.c
@@ -582,7 +582,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
 	u16 data[4];
 	s16 gain[2];
 	u16 minmax[2];
-	static const u16 lna_gain[4] = { -2, 10, 19, 25 };
+	static const s16 lna_gain[4] = { -2, 10, 19, 25 };
 
 	if (nphy->hang_avoid)
 		b43_nphy_stay_in_carrier_search(dev, 1);
-- 
2.35.1

[PATCH AUTOSEL 5.4 05/55] ipw2x00: Fix potential NULL dereference in libipw_xmit()

[Sasha Levin]

From: Haowen Bai <baihaowen@meizu.com>

[ Upstream commit e8366bbabe1d207cf7c5b11ae50e223ae6fc278b ]

crypt and crypt->ops could be null, so we need to checking null
before dereference

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1648797055-25730-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/ipw2x00/libipw_tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c
index d9baa2fa603b..e4c60caa6543 100644
--- a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c
+++ b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c
@@ -383,7 +383,7 @@ netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		/* Each fragment may need to have room for encryption
 		 * pre/postfix */
-		if (host_encrypt)
+		if (host_encrypt && crypt && crypt->ops)
 			bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
 			    crypt->ops->extra_mpdu_postfix_len;
 
-- 
2.35.1

[PATCH AUTOSEL 5.4 06/55] ipv6: fix locking issues with loops over idev->addr_list

[Sasha Levin]

From: Niels Dossche <dossche.niels@gmail.com>

[ Upstream commit 51454ea42c1ab4e0c2828bb0d4d53957976980de ]

idev->addr_list needs to be protected by idev->lock. However, it is not
always possible to do so while iterating and performing actions on
inet6_ifaddr instances. For example, multiple functions (like
addrconf_{join,leave}_anycast) eventually call down to other functions
that acquire the idev->lock. The current code temporarily unlocked the
idev->lock during the loops, which can cause race conditions. Moving the
locks up is also not an appropriate solution as the ordering of lock
acquisition will be inconsistent with for example mc_lock.

This solution adds an additional field to inet6_ifaddr that is used
to temporarily add the instances to a temporary list while holding
idev->lock. The temporary list can then be traversed without holding
idev->lock. This change was done in two places. In addrconf_ifdown, the
list_for_each_entry_safe variant of the list loop is also no longer
necessary as there is no deletion within that specific loop.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220403231523.45843-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/if_inet6.h |  8 ++++++++
 net/ipv6/addrconf.c    | 30 ++++++++++++++++++++++++------
 2 files changed, 32 insertions(+), 6 deletions(-)

diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index a01981d7108f..f6d614926e9e 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -64,6 +64,14 @@ struct inet6_ifaddr {
 
 	struct hlist_node	addr_lst;
 	struct list_head	if_list;
+	/*
+	 * Used to safely traverse idev->addr_list in process context
+	 * if the idev->lock needed to protect idev->addr_list cannot be held.
+	 * In that case, add the items to this list temporarily and iterate
+	 * without holding idev->lock.
+	 * See addrconf_ifdown and dev_forward_change.
+	 */
+	struct list_head	if_list_aux;
 
 	struct list_head	tmp_list;
 	struct inet6_ifaddr	*ifpub;
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 92b32d131e1c..efea88fb3cd5 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -789,6 +789,7 @@ static void dev_forward_change(struct inet6_dev *idev)
 {
 	struct net_device *dev;
 	struct inet6_ifaddr *ifa;
+	LIST_HEAD(tmp_addr_list);
 
 	if (!idev)
 		return;
@@ -807,14 +808,24 @@ static void dev_forward_change(struct inet6_dev *idev)
 		}
 	}
 
+	read_lock_bh(&idev->lock);
 	list_for_each_entry(ifa, &idev->addr_list, if_list) {
 		if (ifa->flags&IFA_F_TENTATIVE)
 			continue;
+		list_add_tail(&ifa->if_list_aux, &tmp_addr_list);
+	}
+	read_unlock_bh(&idev->lock);
+
+	while (!list_empty(&tmp_addr_list)) {
+		ifa = list_first_entry(&tmp_addr_list,
+				       struct inet6_ifaddr, if_list_aux);
+		list_del(&ifa->if_list_aux);
 		if (idev->cnf.forwarding)
 			addrconf_join_anycast(ifa);
 		else
 			addrconf_leave_anycast(ifa);
 	}
+
 	inet6_netconf_notify_devconf(dev_net(dev), RTM_NEWNETCONF,
 				     NETCONFA_FORWARDING,
 				     dev->ifindex, &idev->cnf);
@@ -3713,7 +3724,8 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 	unsigned long event = how ? NETDEV_UNREGISTER : NETDEV_DOWN;
 	struct net *net = dev_net(dev);
 	struct inet6_dev *idev;
-	struct inet6_ifaddr *ifa, *tmp;
+	struct inet6_ifaddr *ifa;
+	LIST_HEAD(tmp_addr_list);
 	bool keep_addr = false;
 	bool was_ready;
 	int state, i;
@@ -3805,16 +3817,23 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 		write_lock_bh(&idev->lock);
 	}
 
-	list_for_each_entry_safe(ifa, tmp, &idev->addr_list, if_list) {
+	list_for_each_entry(ifa, &idev->addr_list, if_list)
+		list_add_tail(&ifa->if_list_aux, &tmp_addr_list);
+	write_unlock_bh(&idev->lock);
+
+	while (!list_empty(&tmp_addr_list)) {
 		struct fib6_info *rt = NULL;
 		bool keep;
 
+		ifa = list_first_entry(&tmp_addr_list,
+				       struct inet6_ifaddr, if_list_aux);
+		list_del(&ifa->if_list_aux);
+
 		addrconf_del_dad_work(ifa);
 
 		keep = keep_addr && (ifa->flags & IFA_F_PERMANENT) &&
 			!addr_is_local(&ifa->addr);
 
-		write_unlock_bh(&idev->lock);
 		spin_lock_bh(&ifa->lock);
 
 		if (keep) {
@@ -3845,15 +3864,14 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 			addrconf_leave_solict(ifa->idev, &ifa->addr);
 		}
 
-		write_lock_bh(&idev->lock);
 		if (!keep) {
+			write_lock_bh(&idev->lock);
 			list_del_rcu(&ifa->if_list);
+			write_unlock_bh(&idev->lock);
 			in6_ifa_put(ifa);
 		}
 	}
 
-	write_unlock_bh(&idev->lock);
-
 	/* Step 5: Discard anycast and multicast list */
 	if (how) {
 		ipv6_ac_destroy_dev(idev);
-- 
2.35.1

[PATCH AUTOSEL 5.4 14/55] ath9k: fix QCA9561 PA bias level

[Sasha Levin]

From: Thibaut VARÈNE <hacks+kernel@slashdirt.org>

[ Upstream commit e999a5da28a0e0f7de242d841ef7d5e48f4646ae ]

This patch fixes an invalid TX PA DC bias level on QCA9561, which
results in a very low output power and very low throughput as devices
are further away from the AP (compared to other 2.4GHz APs).

This patch was suggested by Felix Fietkau, who noted[1]:
"The value written to that register is wrong, because while the mask
definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the
shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is
wrong for 9561."

In real life testing, without this patch the 2.4GHz throughput on
Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to
practical maximum with the patch applied.

[1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name

Signed-off-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220417145145.1847-1-hacks+kernel@slashdirt.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index a171dbb29fbb..ad949eb02f3d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -720,7 +720,7 @@
 #define AR_CH0_TOP2		(AR_SREV_9300(ah) ? 0x1628c : \
 					(AR_SREV_9462(ah) ? 0x16290 : 0x16284))
 #define AR_CH0_TOP2_XPABIASLVL		(AR_SREV_9561(ah) ? 0x1e00 : 0xf000)
-#define AR_CH0_TOP2_XPABIASLVL_S	12
+#define AR_CH0_TOP2_XPABIASLVL_S	(AR_SREV_9561(ah) ? 9 : 12)
 
 #define AR_CH0_XTAL		(AR_SREV_9300(ah) ? 0x16294 : \
 				 ((AR_SREV_9462(ah) || AR_SREV_9565(ah)) ? 0x16298 : \
-- 
2.35.1

[PATCH AUTOSEL 5.4 27/55] ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL

[Sasha Levin]

From: jianghaoran <jianghaoran@kylinos.cn>

[ Upstream commit b52e1cce31ca721e937d517411179f9196ee6135 ]

ARPHRD_TUNNEL interface can't process rs packets
and will generate TX errors

ex:
ip tunnel add ethn mode ipip local 192.168.1.1 remote 192.168.1.2
ifconfig ethn x.x.x.x

ethn: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1480
	inet x.x.x.x  netmask 255.255.255.255  destination x.x.x.x
	inet6 fe80::5efe:ac1e:3cdb  prefixlen 64  scopeid 0x20<link>
	tunnel   txqueuelen 1000  (IPIP Tunnel)
	RX packets 0  bytes 0 (0.0 B)
	RX errors 0  dropped 0  overruns 0  frame 0
	TX packets 0  bytes 0 (0.0 B)
	TX errors 3  dropped 0 overruns 0  carrier 0  collisions 0

Signed-off-by: jianghaoran <jianghaoran@kylinos.cn>
Link: https://lore.kernel.org/r/20220429053802.246681-1-jianghaoran@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/addrconf.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index efea88fb3cd5..e29553e4f4ee 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4202,7 +4202,8 @@ static void addrconf_dad_completed(struct inet6_ifaddr *ifp, bool bump_id,
 	send_rs = send_mld &&
 		  ipv6_accept_ra(ifp->idev) &&
 		  ifp->idev->cnf.rtr_solicits != 0 &&
-		  (dev->flags&IFF_LOOPBACK) == 0;
+		  (dev->flags & IFF_LOOPBACK) == 0 &&
+		  (dev->type != ARPHRD_TUNNEL);
 	read_unlock_bh(&ifp->idev->lock);
 
 	/* While dad is in progress mld report's source address is in6_addrany.
-- 
2.35.1

[PATCH AUTOSEL 5.4 28/55] net/mlx5: fs, delete the FTE when there are no rules attached to it

[Sasha Levin]

From: Mark Bloch <mbloch@nvidia.com>

[ Upstream commit 7b0c6338597613f465d131bd939a51844a00455a ]

When an FTE has no children is means all the rules where removed
and the FTE can be deleted regardless of the dests_size value.
While dests_size should be 0 when there are no children
be extra careful not to leak memory or get firmware syndrome
if the proper bookkeeping of dests_size wasn't done.

Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
index 5baf2c666d29..8c8b68e7abb4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -1937,16 +1937,16 @@ void mlx5_del_flow_rules(struct mlx5_flow_handle *handle)
 	down_write_ref_node(&fte->node, false);
 	for (i = handle->num_rules - 1; i >= 0; i--)
 		tree_remove_node(&handle->rule[i]->node, true);
-	if (fte->dests_size) {
-		if (fte->modify_mask)
-			modify_fte(fte);
-		up_write_ref_node(&fte->node, false);
-	} else if (list_empty(&fte->node.children)) {
+	if (list_empty(&fte->node.children)) {
 		del_hw_fte(&fte->node);
 		/* Avoid double call to del_hw_fte */
 		fte->node.del_hw_func = NULL;
 		up_write_ref_node(&fte->node, false);
 		tree_put_node(&fte->node, false);
+	} else if (fte->dests_size) {
+		if (fte->modify_mask)
+			modify_fte(fte);
+		up_write_ref_node(&fte->node, false);
 	} else {
 		up_write_ref_node(&fte->node, false);
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.4 30/55] mlxsw: spectrum_dcb: Do not warn about priority changes

[Sasha Levin]

From: Petr Machata <petrm@nvidia.com>

[ Upstream commit b6b584562cbe7dc357083459d6dd5b171e12cadb ]

The idea behind the warnings is that the user would get warned in case when
more than one priority is configured for a given DSCP value on a netdevice.

The warning is currently wrong, because dcb_ieee_getapp_mask() returns
the first matching entry, not all of them, and the warning will then claim
that some priority is "current", when in fact it is not.

But more importantly, the warning is misleading in general. Consider the
following commands:

 # dcb app flush dev swp19 dscp-prio
 # dcb app add dev swp19 dscp-prio 24:3
 # dcb app replace dev swp19 dscp-prio 24:2

The last command will issue the following warning:

 mlxsw_spectrum3 0000:07:00.0 swp19: Ignoring new priority 2 for DSCP 24 in favor of current value of 3

The reason is that the "replace" command works by first adding the new
value, and then removing all old values. This is the only way to make the
replacement without causing the traffic to be prioritized to whatever the
chip defaults to. The warning is issued in response to adding the new
priority, and then no warning is shown when the old priority is removed.
The upshot is that the canonical way to change traffic prioritization
always produces a warning about ignoring the new priority, but what gets
configured is in fact what the user intended.

An option to just emit warning every time that the prioritization changes
just to make it clear that it happened is obviously unsatisfactory.

Therefore, in this patch, remove the warnings.

Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
index 21296fa7f7fb..bf51ed94952c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c
@@ -227,8 +227,6 @@ static int mlxsw_sp_dcbnl_ieee_setets(struct net_device *dev,
 static int mlxsw_sp_dcbnl_app_validate(struct net_device *dev,
 				       struct dcb_app *app)
 {
-	int prio;
-
 	if (app->priority >= IEEE_8021QAZ_MAX_TCS) {
 		netdev_err(dev, "APP entry with priority value %u is invalid\n",
 			   app->priority);
@@ -242,17 +240,6 @@ static int mlxsw_sp_dcbnl_app_validate(struct net_device *dev,
 				   app->protocol);
 			return -EINVAL;
 		}
-
-		/* Warn about any DSCP APP entries with the same PID. */
-		prio = fls(dcb_ieee_getapp_mask(dev, app));
-		if (prio--) {
-			if (prio < app->priority)
-				netdev_warn(dev, "Choosing priority %d for DSCP %d in favor of previously-active value of %d\n",
-					    app->priority, app->protocol, prio);
-			else if (prio > app->priority)
-				netdev_warn(dev, "Ignoring new priority %d for DSCP %d in favor of current value of %d\n",
-					    app->priority, app->protocol, prio);
-		}
 		break;
 
 	case IEEE_8021QAZ_APP_SEL_ETHERTYPE:
-- 
2.35.1

[PATCH AUTOSEL 5.4 34/55] net: remove two BUG() from skb_checksum_help()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d7ea0d9df2a6265b2b180d17ebc64b38105968fc ]

I have a syzbot report that managed to get a crash in skb_checksum_help()

If syzbot can trigger these BUG(), it makes sense to replace
them with more friendly WARN_ON_ONCE() since skb_checksum_help()
can instead return an error code.

Note that syzbot will still crash there, until real bug is fixed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index a03036456221..8fd0a0591e89 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2857,11 +2857,15 @@ int skb_checksum_help(struct sk_buff *skb)
 	}
 
 	offset = skb_checksum_start_offset(skb);
-	BUG_ON(offset >= skb_headlen(skb));
+	ret = -EINVAL;
+	if (WARN_ON_ONCE(offset >= skb_headlen(skb)))
+		goto out;
+
 	csum = skb_checksum(skb, offset, skb->len - offset, 0);
 
 	offset += skb->csum_offset;
-	BUG_ON(offset + sizeof(__sum16) > skb_headlen(skb));
+	if (WARN_ON_ONCE(offset + sizeof(__sum16) > skb_headlen(skb)))
+		goto out;
 
 	if (skb_cloned(skb) &&
 	    !skb_clone_writable(skb, offset + sizeof(__sum16))) {
-- 
2.35.1

[PATCH AUTOSEL 5.4 41/55] rtlwifi: Use pr_warn instead of WARN_ONCE

[Sasha Levin]

From: Dongliang Mu <mudongliangabcd@gmail.com>

[ Upstream commit ad732da434a2936128769216eddaece3b1af4588 ]

This memory allocation failure can be triggered by fault injection or
high pressure testing, resulting a WARN.

Fix this by replacing WARN with pr_warn.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220511014453.1621366-1-dzm91@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index bad06939a247..9bcb187d37dc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1013,7 +1013,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 	hw = ieee80211_alloc_hw(sizeof(struct rtl_priv) +
 				sizeof(struct rtl_usb_priv), &rtl_ops);
 	if (!hw) {
-		WARN_ONCE(true, "rtl_usb: ieee80211 alloc failed\n");
+		pr_warn("rtl_usb: ieee80211 alloc failed\n");
 		return -ENOMEM;
 	}
 	rtlpriv = hw->priv;
-- 
2.35.1

[PATCH AUTOSEL 5.4 48/55] net: phy: micrel: Allow probing without .driver_data

[Sasha Levin]

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit f2ef6f7539c68c6bd6c32323d8845ee102b7c450 ]

Currently, if the .probe element is present in the phy_driver structure
and the .driver_data is not, a NULL pointer dereference happens.

Allow passing .probe without .driver_data by inserting NULL checks
for priv->type.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220513114613.762810-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/micrel.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 18cc5e4280e8..721153dcfd15 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -282,7 +282,7 @@ static int kszphy_config_reset(struct phy_device *phydev)
 		}
 	}
 
-	if (priv->led_mode >= 0)
+	if (priv->type && priv->led_mode >= 0)
 		kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);
 
 	return 0;
@@ -298,10 +298,10 @@ static int kszphy_config_init(struct phy_device *phydev)
 
 	type = priv->type;
 
-	if (type->has_broadcast_disable)
+	if (type && type->has_broadcast_disable)
 		kszphy_broadcast_disable(phydev);
 
-	if (type->has_nand_tree_disable)
+	if (type && type->has_nand_tree_disable)
 		kszphy_nand_tree_disable(phydev);
 
 	return kszphy_config_reset(phydev);
@@ -939,7 +939,7 @@ static int kszphy_probe(struct phy_device *phydev)
 
 	priv->type = type;
 
-	if (type->led_mode_reg) {
+	if (type && type->led_mode_reg) {
 		ret = of_property_read_u32(np, "micrel,led-mode",
 				&priv->led_mode);
 		if (ret)
@@ -960,7 +960,8 @@ static int kszphy_probe(struct phy_device *phydev)
 		unsigned long rate = clk_get_rate(clk);
 		bool rmii_ref_clk_sel_25_mhz;
 
-		priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
+		if (type)
+			priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
 		rmii_ref_clk_sel_25_mhz = of_property_read_bool(np,
 				"micrel,rmii-reference-clock-select-25-mhz");
 
-- 
2.35.1

[PATCH AUTOSEL 5.4 53/55] rxrpc: Return an error to sendmsg if call failed

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 4ba68c5192554876bd8c3afd904e3064d2915341 ]

If at the end of rxrpc sendmsg() or rxrpc_kernel_send_data() the call that
was being given data was aborted remotely or otherwise failed, return an
error rather than returning the amount of data buffered for transmission.

The call (presumably) did not complete, so there's not much point
continuing with it.  AF_RXRPC considers it "complete" and so will be
unwilling to do anything else with it - and won't send a notification for
it, deeming the return from sendmsg sufficient.

Not returning an error causes afs to incorrectly handle a StoreData
operation that gets interrupted by a change of address due to NAT
reconfiguration.

This doesn't normally affect most operations since their request parameters
tend to fit into a single UDP packet and afs_make_call() returns before the
server responds; StoreData is different as it involves transmission of a
lot of data.

This can be triggered on a client by doing something like:

	dd if=/dev/zero of=/afs/example.com/foo bs=1M count=512

at one prompt, and then changing the network address at another prompt,
e.g.:

	ifconfig enp6s0 inet 192.168.6.2 && route add 192.168.6.1 dev enp6s0

Tracing packets on an Auristor fileserver looks something like:

192.168.6.1 -> 192.168.6.3  RX 107 ACK Idle  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
192.168.6.3 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(64538) (64538)
192.168.6.3 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(64538) (64538)
192.168.6.1 -> 192.168.6.3  RX 107 ACK Idle  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
<ARP exchange for 192.168.6.2>
192.168.6.2 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(0) (0)
192.168.6.2 -> 192.168.6.1  AFS (RX) 1482 FS Request: Unknown(0) (0)
192.168.6.1 -> 192.168.6.2  RX 107 ACK Exceeds Window  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
192.168.6.1 -> 192.168.6.2  RX 74 ABORT  Seq: 0  Call: 4  Source Port: 7000  Destination Port: 7001
192.168.6.1 -> 192.168.6.2  RX 74 ABORT  Seq: 29321  Call: 4  Source Port: 7000  Destination Port: 7001

The Auristor fileserver logs code -453 (RXGEN_SS_UNMARSHAL), but the abort
code received by kafs is -5 (RX_PROTOCOL_ERROR) as the rx layer sees the
condition and generates an abort first and the unmarshal error is a
consequence of that at the application layer.

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004810.html # v1
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/sendmsg.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c
index 1a340eb0abf7..22f020099214 100644
--- a/net/rxrpc/sendmsg.c
+++ b/net/rxrpc/sendmsg.c
@@ -463,6 +463,12 @@ static int rxrpc_send_data(struct rxrpc_sock *rx,
 
 success:
 	ret = copied;
+	if (READ_ONCE(call->state) == RXRPC_CALL_COMPLETE) {
+		read_lock_bh(&call->state_lock);
+		if (call->error < 0)
+			ret = call->error;
+		read_unlock_bh(&call->state_lock);
+	}
 out:
 	call->tx_pending = skb;
 	_leave(" = %d", ret);
-- 
2.35.1

[PATCH AUTOSEL 5.4 54/55] eth: tg3: silence the GCC 12 array-bounds warning

[Sasha Levin]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 9dec850fd7c210a04b4707df8e6c95bfafdd6a4b ]

GCC 12 currently generates a rather inconsistent warning:

drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds]
17795 |                 struct tg3_napi *tnapi = &tp->napi[i];
      |                                           ~~~~~~~~^~~

i is guaranteed < tp->irq_max which in turn is either 1 or 5.
There are more loops like this one in the driver, but strangely
GCC 12 dislikes only this single one.

Silence this silliness for now.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/Makefile | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile
index 7046ad6d3d0e..ac50da49ca77 100644
--- a/drivers/net/ethernet/broadcom/Makefile
+++ b/drivers/net/ethernet/broadcom/Makefile
@@ -16,3 +16,8 @@ obj-$(CONFIG_BGMAC_BCMA) += bgmac-bcma.o bgmac-bcma-mdio.o
 obj-$(CONFIG_BGMAC_PLATFORM) += bgmac-platform.o
 obj-$(CONFIG_SYSTEMPORT) += bcmsysport.o
 obj-$(CONFIG_BNXT) += bnxt/
+
+# FIXME: temporarily silence -Warray-bounds on non W=1+ builds
+ifndef KBUILD_EXTRA_WARN
+CFLAGS_tg3.o += -Wno-array-bounds
+endif
-- 
2.35.1

[PATCH AUTOSEL 5.4 55/55] selftests/bpf: fix btf_dump/btf_dump due to recent clang change

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 4050764cbaa25760aab40857f723393c07898474 ]

Latest llvm-project upstream had a change of behavior
related to qualifiers on function return type ([1]).
This caused selftests btf_dump/btf_dump failure.
The following example shows what changed.

  $ cat t.c
  typedef const char * const (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int));
  struct t {
    int a;
    fn_ptr_arr2_t l;
  };
  int foo(struct t *arg) {
    return arg->a;
  }

Compiled with latest upstream llvm15,
  $ clang -O2 -g -target bpf -S -emit-llvm t.c
The related generated debuginfo IR looks like:
  !16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
  !17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !32)
  !18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
  !19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
  !20 = !DISubroutineType(types: !21)
  !21 = !{!22, null}
  !22 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !23, size: 64)
  !23 = !DISubroutineType(types: !24)
  !24 = !{!25, !28}
  !25 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !26, size: 64)
  !26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
  !27 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
You can see two intermediate const qualifier to pointer are dropped in debuginfo IR.

With llvm14, we have following debuginfo IR:
  !16 = !DIDerivedType(tag: DW_TAG_typedef, name: "fn_ptr_arr2_t", file: !1, line: 1, baseType: !17)
  !17 = !DICompositeType(tag: DW_TAG_array_type, baseType: !18, size: 320, elements: !34)
  !18 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !19)
  !19 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !20, size: 64)
  !20 = !DISubroutineType(types: !21)
  !21 = !{!22, null}
  !22 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !23)
  !23 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !24, size: 64)
  !24 = !DISubroutineType(types: !25)
  !25 = !{!26, !30}
  !26 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !27)
  !27 = !DIDerivedType(tag: DW_TAG_pointer_type, baseType: !28, size: 64)
  !28 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !29)
  !29 = !DIBasicType(name: "char", size: 8, encoding: DW_ATE_signed_char)
All const qualifiers are preserved.

To adapt the selftest to both old and new llvm, this patch removed
the intermediate const qualifier in const-to-ptr types, to make the
test succeed again.

  [1] https://reviews.llvm.org/D125919

Reported-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220523152044.3905809-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
index d4a02fe44a12..0620580a5c16 100644
--- a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
+++ b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
@@ -94,7 +94,7 @@ typedef void (* (*signal_t)(int, void (*)(int)))(int);
 
 typedef char * (*fn_ptr_arr1_t[10])(int **);
 
-typedef char * (* const (* const fn_ptr_arr2_t[5])())(char * (*)(int));
+typedef char * (* (* const fn_ptr_arr2_t[5])())(char * (*)(int));
 
 struct struct_w_typedefs {
 	int_t a;
-- 
2.35.1